Tour operator Jobs - Al Ahsa Saudi

<ul><li><p><strong>Position 1: Heavy Forklift Operator (10 Ton)</strong></p><ul><li><p>Safe and efficient operation of a 10-ton forklift to move, load, unload, and stack materials across the site.</p></li><li><p>Perform mandatory daily pre-operational checks and safety inspections on the equipment before operation.</p></li><li><p>Strictly adhere to Saudi Aramco safety procedures, project specifications, and site guidelines.</p></li><li><p>Coordinate effectively with riggers, material handlers, and site supervisors during operations.</p></li><li><br></li></ul><p><strong>Position 2: Mobile Crane Operator (50–55 Ton)</strong></p><ul><li><p>Safe operation of mobile cranes (50–55 Ton capacity) for heavy lifting and equipment movement.</p></li><li><p>Perform pre-start inspections and basic preventive checks on the crane.</p></li><li><p>Execute lifting operations in close alignment with approved lifting plans and certified riggers.</p></li><li><p>Ensure full compliance with Saudi Aramco Health, Safety, and Environment (HSE) standards on-site.</p></li></ul></li></ul><p><strong>Desired Candidate Profile</strong></p><p><strong>Requirements for Heavy Forklift Operator (10 Ton):</strong></p><ul><li><p><strong>Saudi Aramco Approval:</strong> Must hold a valid Saudi Aramco Certification/Card for Forklift Operator.</p></li><li><p><strong>Education & Training:</strong> EnergyTech / NITI certification (formerly SPSP) is required.</p></li><li><p><strong>Experience:</strong> 3 to 6 years of proven hands-on experience in operating 10-ton forklifts.</p></li><li><p><strong>Iqama:</strong> Valid and Transferable Iqama (Candidates currently in Saudi Arabia).</p></li><li><br></li></ul><p><strong>Requirements for Mobile Crane Operator (50–55 Ton):</strong></p><ul><li><p><strong>Saudi Aramco Approval:</strong> Must hold a valid Saudi Aramco Certification for Mobile Crane Operator (50–55 Ton).</p></li><li><p><strong>Experience:</strong> 3 to 5 years of hands-on experience operating mobile cranes (50–55 Ton) in oil & gas or industrial projects.</p></li><li><p><strong>Iqama:</strong> Valid and Transferable Iqama (Candidates currently in Saudi Arabia).</p></li></ul><br><br><br><br><br>

Job Purpose:The Projects, Fleet & Operator Controller is responsible for the end-to-end optimization, strategic scheduling, and safe management of the organization’s heavy machinery, and field personnel (drivers and heavy equipment operators). This role bridges the gap between project demands and assets, ensuring that human capital and physical machinery are synchronized to deliver projects on time, maximize fuel and maintenance efficiency, and enforce absolute compliance with transport and safety laws.<br>Key Accountabilities\Responsibilities:Fleet & Asset Management• Asset Lifecycle Management: Oversee the registration, licensing, tracking, and eventual decommissioning of all fleet vehicles and heavy machinery.• Telematics & Tracking: Monitor vehicle GPS and diagnostic data using telematics systems to track equipment locations, idle times, and operational hours.• Preventive Maintenance: Design and enforce strict maintenance schedules to minimize emergency breakdowns and maximize equipment lifespan. <br>Operator & Driver Management• Manpower Scheduling: Create shift rosters, rotation schedules, and project assignments for drivers and heavy equipment operators.• Performance & Behavior Monitoring: Review telematics data to grade driver behavior (speeding, harsh braking, idling) and implement correction plans.• Compliance & Licensing: Verify and track validity of driver licenses, heavy equipment operator permits (Aramco/TUV certifications), and medical checks.• HR & Grievance Handling: Act as the first point of contact for driver disputes, attendance management, leaves, and disciplinary actions.• Safety & Training: Conduct tool-box talks, coordinate regular defensive driving training, and enforce mandatory rest periods to prevent Operator/Driver fatigue. <br>Project Execution & Financial Control• Resource Allocation: Collaborate with Project Managers to ensure the right assets and qualified personnel are delivered to job sites on schedule.• Budget & Cost Optimization: Track and report on key cost drivers, including fuel consumption, repair expenses, toll fees, and operator overtime.• Incident Response: Lead investigations into traffic accidents, on-site equipment failures, or property damage, drafting comprehensive risk and insurance reports.<br>Skill & Competencies:• Software Proficiency: Hands-on experience with Fleet Management Systems (FMS), GPS tracking software (e.g., STC Fleet Control), and ERPs (SAP/Oracle).• Regulatory Knowledge: Deep understanding of Saudi Ministry of Transport (MOT) regulations, TGA laws, and Saudi Labor law regarding working hours.• Soft Skills: Strong conflict resolution, negotiation, and high stress tolerance to manage a large, diverse workforce of field operators.• Languages: English is mandatory; conversational Arabic or Hindi\Urdu is highly advantageous for driver management.<br>Qualification:Diploma or degree in Logistics, Supply Chain Management, Business, or Administration.<br>Experience:Minimum of 8 years of experience in fleet operations, with at least 3 years in a leadership role managing drivers/operators.

Company Description: Al Rushd International is a Saudi-based industrial equipment rental and services company supporting construction, oil & gas, petrochemical, industrial, infrastructure, and maintenance sectors across the Kingdom. The company provides a wide range of heavy and powered equipment, including mobile cranes, forklifts, telehandlers, air compressors, generators, and other specialized industrial machinery. Al Rushd International focuses on delivering reliable equipment, responsive service, and flexible rental solutions to help customers execute projects safely, efficiently, and on schedule. The company aims to build long-term partnerships with contractors, EPC companies, industrial facilities, and project owners by offering dependable support for construction projects, plant maintenance, shutdowns, and turnaround activities. Team members join a growing organization committed to operational excellence and customer satisfaction in critical industrial environments. Role Description The Forklift Operator is a full-time, on-site role based in Al Jubail. This role is responsible for operating forklifts and related material handling equipment to move, load, and unload industrial equipment and supplies safely within warehouses, yards, and job sites. Day-to-day tasks include receiving and organizing shipments, staging equipment for delivery or collection, assisting with packing and securing loads, and supporting inventory control and documentation processes. The Forklift Operator collaborates closely with warehouse, logistics, and operations teams to ensure materials are handled efficiently, accurately, and in compliance with safety standards. The role also involves routine equipment checks, reporting any maintenance needs, and following company procedures to maintain a clean, orderly, and safe work environment. Qualifications Candidates should possess strong Forklift Operation skills and experience with industrial material handling equipment. Candidates having experience to Saudi Aramco site will have an added advantage. Candidates should possess skills in Shipping & Receiving to support accurate documentation, inspection, and tracking of incoming and outgoing materials. Candidates should possess skills in Unloading and Material Handling to safely move and position heavy equipment and supplies. Candidates should possess skills in Packing to properly secure loads for storage and transport, following safety and quality standards. Valid forklift license or certification, with knowledge of safety regulations and best practices. Previous experience in warehousing, logistics, construction, or industrial environments is preferred. Ability to read and follow work orders, safety instructions, and basic inventory documents. Physical ability to lift, carry, and move materials and to work in outdoor and industrial conditions. Strong attention to detail, commitment to safety, and ability to work both independently and in a team. Basic communication skills in English; Arabic language skills are an advantage.

Company Description: Al Rushd International is a Saudi-based industrial equipment rental and services company supporting construction, oil & gas, petrochemical, industrial, infrastructure, and maintenance sectors across the Kingdom. The company provides a wide range of heavy and powered equipment, including mobile cranes, forklifts, telehandlers, air compressors, generators, and other specialized industrial machinery. Al Rushd International focuses on delivering reliable equipment, responsive service, and flexible rental solutions to help customers execute projects safely, efficiently, and on schedule. The company aims to build long-term partnerships with contractors, EPC companies, industrial facilities, and project owners by offering dependable support for construction projects, plant maintenance, shutdowns, and turnaround activities. Team members join a growing organization committed to operational excellence and customer satisfaction in critical industrial environments. Role Description The Forklift Operator is a full-time, on-site role based in Al Jubail. This role is responsible for operating forklifts and related material handling equipment to move, load, and unload industrial equipment and supplies safely within warehouses, yards, and job sites. Day-to-day tasks include receiving and organizing shipments, staging equipment for delivery or collection, assisting with packing and securing loads, and supporting inventory control and documentation processes. The Forklift Operator collaborates closely with warehouse, logistics, and operations teams to ensure materials are handled efficiently, accurately, and in compliance with safety standards. The role also involves routine equipment checks, reporting any maintenance needs, and following company procedures to maintain a clean, orderly, and safe work environment. Qualifications Candidates should possess strong Forklift Operation skills and experience with industrial material handling equipment. Candidates having experience to Saudi Aramco site will have an added advantage. Candidates should possess skills in Shipping & Receiving to support accurate documentation, inspection, and tracking of incoming and outgoing materials. Candidates should possess skills in Unloading and Material Handling to safely move and position heavy equipment and supplies. Candidates should possess skills in Packing to properly secure loads for storage and transport, following safety and quality standards. Valid forklift license or certification, with knowledge of safety regulations and best practices. Previous experience in warehousing, logistics, construction, or industrial environments is preferred. Ability to read and follow work orders, safety instructions, and basic inventory documents. Physical ability to lift, carry, and move materials and to work in outdoor and industrial conditions. Strong attention to detail, commitment to safety, and ability to work both independently and in a team. Basic communication skills in English; Arabic language skills are an advantage.

At Air Products, we reimagine what’s possible. By tapping into the motivation of our people and our collective experience, we create the ideas and innovations that drive us forward. When we come together – where every voice is heard and everyone knows they belong and matter – we create solutions that launch people into space, support lifesaving care in hospitals, and enable the construction of groundbreaking, world scale production facilities.<br><br>Reimagine What’s Possible <br><br>ABOUT THE COMPANY:<br><br>BHIG—Blue Hydrogen Industrial Gases is a regional development and investment joint venture (JV) between Saudi Aramco and Air Products Qudra “APQ”. Our company benefits from the combined strengths of two leading entities. BHIG is positioned to drive industrial innovation and operational excellence across Saudi Arabia and the region. BHIG focuses on supporting clean energy goals through low-carbon hydrogen production.<br><br>Reimagine What’s Possible<br><br>The HYCO Lead Operator, reporting to the HYCO Shift Supervisor, is accountable for the day-to-day DCS & Field Operation of HYCO facility, ensuring the production requirements set by the customer are achieved. HYCO Lead Operator is responsible for the safe, efficient and stable operation of the entire Hydrogen Manufacturing Unit from a centralized control room using DCS. This includes monitoring, controlling and optimizing to meet production targets, quality specifications and environmental regulations. This includes actively supporting plant performance, process optimization and production stability while maintaining strong focus on safety & compliance. The HYCO Lead Operator will execute daily tasks which include preparing and implementing safety work permits, LOTO, completing operations preventative maintenance activities, and assist the maintenance and engineering teams in preparing and executing corrective maintenance activities. Lead operator will handle the Shift lead responsibility in absence of Shift supervisor ensuring the business continuity.<br><br>Principal Accountabilities<br><br>Safety, Health & Environment<br><br>Maintain a safe & stable environment. Demonstrate leadership with all Company & Industry safe work processes to prevent all injuries. Ensure proper documentation is maintained for safety related activities. Enforce and adhere to all Safe Work Permits and Lock-out Tag-out and management of change procedures. Be the first line of response for process emergencies. Execute emergency operating procedures, initiate plant trips if necessary and direct field operators. Monitor status of Safety Instrumented System (SIS) and Fire & Gas Systems. Understand the cause & effect chart for all safety interlocks. Ensure all plant emissions (from reformer stack, vent streams) comply with environmental permits. Properly manage waste streams. Ensure the safety of all operations personnel by utilizing the BHIG Basic Safety Practice program <br><br>Technical & Operations<br><br>Operate the Steam Methane Reformer based hydrogen plant with CO2 Removal section & CO2 compression, PSA with Tail Gas compression, Membrane Unit and related utilities as prescribed by the Work Instruction Procedures Operate the pipeline network to supply Hydrogen, steam and CO2 to customers’ pipelines safely and efficiently. Report production progress and plant status to the Shift Supervisor and suggest solutions for any shortfalls. Manage plant production efficiently based on input provided by Plant Management to ensure safety and reliability targets are met to achieve maximum profitability. Ensure BHIG standards, and global best practices for EH&S, productivity, reliability, quality, and overall customer services are met. Meet the customer’s requirements regarding safety, reliability, product quality, and flexibility regarding product supply. Maintain customer communications and relationships at the ‘board’ level, ensuring customer demand rates are satisfied while maximizing the efficiency and profitability of the facility. Follow the Site Work Instruction Manuals for production & supply of Product H2, CO2 & Steam along with other operating and maintenance procedures and checklists to meet the customer’s satisfaction with safety, reliability, product quality, and flexibility of product supply while compliance with requirements. Maintain a relationship with the customer’s counterparts from other Refinery Units where from BHIG either receiving Feedstock, Utilities & Power or supplying Hydrogen and Steam to different Refinery Units on a regular basis through Refinery Shift Superintendent to ensure alignment of expectations for BHIG and the customers current and future product demand. Constantly monitor all process variables (flows, temperatures, pressures, levels, analytical values) via DCS to ensure they are within defined operating limits. Manipulate control loops, setpoints and cascades to maintain sable operations of all integrated units. Use historical data and trends to predict equipment performance degradation, identify inefficiencies and prevent potential trips and failures. Execute & supervise the detailed start up sequence for the entire plant or individual units/loops form a cold condition, warm condition or hot stand by condition, ensuring a smooth & safe transition to full load normal operations. Assist in the commissioning activities of the facility Maintain constant communication with field operators, providing instructions for equipment adjustments, isolations and rounds. Liaise with the maintenance team to co-ordinate equipment preparation for maintenance (isolation, purging & blinding) and safe taking equipment back in line. Conduct detailed and accurate shift handovers with incoming operators, highlighting any abnormalities, ongoing work and special instruction. Follow shift turnover protocols to ensure a safe and efficient handover to the following shift. Maintain accurate and timely logs of operating parameters, significant events and production data. Fully accountable to ensure his logs and that his operator’s logs are accurate and compliant with published matrix. Identify the root cause of process deviations and equipment malfunction. Work with engineers to implement long-term solutions. Suggest and participate in operational improvements and de-bottlenecking projects to enhance safety, reliability and profitability. Ensure compliance with all CM, PM tasks & Environmental Regulatory requirements. Support and prepare for Shutdown Planning and Turnaround Planning. Provide coaching and motivation with the field operations team to achieve operational excellence and customer satisfaction. Establish & maintain close working relationships with engineering and maintenance personnel to continuously monitor & evaluate plant systems & equipment performance. Ensure compliance with process safety, MOC’s, and OPHR requirements. Provide operations support and participate in investigations and Root Cause Analysis to identify & implement sustainable corrective actions. Facilitate attainment of operational excellence and customer satisfaction via operations productivity, reliability, quality, and continuous improvement initiatives. Communication of plant activities with other shifts to maintain continuity between shifts for a safe and reliable operation. Execute other duties as assigned by reporting managers in a timely and efficient manner. <br><br>Minimum Requirements And Qualifications<br><br>Bachelor’s degree in chemical, Mechanical, or Chemical Process Operations with 10 years’ experience preferred. An Associate Technical Degree (2-year certificate) will be considered based on years of experience and competence. Experience in DCS Operation & Field Operation, with minimum of 5 years’ Lead DCS Operations Experience in SMR based Hydrogen or Ammonia or Methanol or Syngas plant as DCS Operator. Proficiency with DCS platforms (e.g. Yokogawa Centum VP, Siemens PCS 7) Deep understanding of Chemical Engineering Principles, thermodynamics and process control. Wide technical knowledge in operations, engineering, and maintenance activities Ability to maintain high level of awareness and make sound decisions under pressure. Strong problem solving and diagnostic abilities. Clear, concise and effective verbal and written communication. Proficiency in English speaking and writing. Ability to communicate with the customer at the board level daily. Able to communicate between operations and maintenance teams. Deep understanding of Chemical Engineering Principles, thermodynamics and process control A strong commitment to employee involvement, team building and diversity.<br><br>Founded in 1940, Air Products is a world-leading industrial gases company and has a proud history of innovation, operational excellence, with an unwavering commitment to safety and environmental stewardship. Working together, we are taking our passion and diverse backgrounds forward to reimagine what’s possible and generate a cleaner future for our customers, our communities, and the world.

Job Description<br><br>Job Responsibilities & Tasks: <br><br> Facilitate the work of the Quality Inspector and ensure the conformity of the product requirements with the standard finished goods specs. Ensure proper cleaning of his line during the shift and month close. Fill in the daily production report & submit it to the Production Team Leader. Set the machine properly & perform size changes. Ensure the proper handling of raw material received-returned / from-to Raw Material warehouse. Verbally inform the Lead Operator and the Line Setter of any problem that occurs on the machine. Make sure all finished goods pallets, waste bin, waste trolley and raw material are in their dedicated place. Comply and follow safety and environmental instructions and participate in toolbox talks given by HSE officer. Consultation and participation at all applicable levels and functions ( ex. the development, planning, implementation, performance evaluation and actions for improvement of the OH&S management system).<br><br>Additional Requirements<br><br> Minimum 1–2 years of hands-on experience in blown film extrusion, preferably in PE films using LDPE, LLDPE and HDPE. Experience operating mono-layer and/or multi-layer blown film extrusion lines, preferably on machines such as Kiefel, W&H, Alpine, Bandera or similar. Good knowledge of extrusion process parameters and troubleshooting, including temperature, pressure, output, bubble stability, thickness variation, film width, winding and common film defects. Basic knowledge of raw materials and blending, including PE resin grades, masterbatch and additives, and their impact on processability and film quality. Technical diploma or relevant industrial background, with good awareness of safety, quality requirements, SOPs and basic production documentation.

Job Description<br><br>Job Responsibilities & Tasks: <br><br> Facilitate the work of the Quality Inspector and ensure the conformity of the product requirements with the standard finished goods specs. Ensure proper cleaning of his line during the shift and month close. Fill in the daily production report & submit it to the Production Team Leader. Set the machine properly & perform size changes. Ensure the proper handling of raw material received-returned / from-to Raw Material warehouse. Verbally inform the Lead Operator and the Line Setter of any problem that occurs on the machine. Make sure all finished goods pallets, waste bin, waste trolley and raw material are in their dedicated place. Comply and follow safety and environmental instructions and participate in toolbox talks given by HSE officer. Consultation and participation at all applicable levels and functions (ex. the development, planning, implementation, performance evaluation and actions for improvement of the OH&S management system).<br><br>Additional Requirements<br><br> Minimum 1–2 years of hands-on experience in blown film extrusion, preferably in PE films using LDPE, LLDPE and HDPE. Experience operating mono-layer and/or multi-layer blown film extrusion lines, preferably on machines such as Kiefel, W&H, Alpine, Bandera or similar. Good knowledge of extrusion process parameters and troubleshooting, including temperature, pressure, output, bubble stability, thickness variation, film width, winding and common film defects. Basic knowledge of raw materials and blending, including PE resin grades, masterbatch and additives, and their impact on processability and film quality. Technical diploma or relevant industrial background, with good awareness of safety, quality requirements, SOPs and basic production documentation.

Job Description<br><br>Job Responsibilities & Tasks: <br><br> Facilitate the work of the Quality Inspector and ensure the conformity of the product requirements with the standard finished goods specs. Ensure proper cleaning of his line during the shift and month close. Fill in the daily production report & submit it to the Production Team Leader. Set the machine properly & perform size changes. Ensure the proper handling of raw material received-returned / from-to Raw Material warehouse. Verbally inform the Lead Operator and the Line Setter of any problem that occurs on the machine. Make sure all finished goods pallets, waste bin, waste trolley and raw material are in their dedicated place. Comply and follow safety and environmental instructions and participate in toolbox talks given by HSE officer. Consultation and participation at all applicable levels and functions ( ex. the development, planning, implementation, performance evaluation and actions for improvement of the OH&S management system).<br><br>Additional Requirements<br><br> Minimum 1–2 years of hands-on experience in blown film extrusion, preferably in PE films using LDPE, LLDPE and HDPE. Experience operating mono-layer and/or multi-layer blown film extrusion lines, preferably on machines such as Kiefel, W&H, Alpine, Bandera or similar. Good knowledge of extrusion process parameters and troubleshooting, including temperature, pressure, output, bubble stability, thickness variation, film width, winding and common film defects. Basic knowledge of raw materials and blending, including PE resin grades, masterbatch and additives, and their impact on processability and film quality. Technical diploma or relevant industrial background, with good awareness of safety, quality requirements, SOPs and basic production documentation.

Job Description<br><br>Job Responsibilities & Tasks: <br><br> Facilitate the work of the Quality Inspector and ensure the conformity of the product requirements with the standard finished goods specs. Ensure proper cleaning of his line during the shift and month close. Fill in the daily production report & submit it to the Production Team Leader. Set the machine properly & perform size changes. Ensure the proper handling of raw material received-returned / from-to Raw Material warehouse. Verbally inform the Lead Operator and the Line Setter of any problem that occurs on the machine. Make sure all finished goods pallets, waste bin, waste trolley and raw material are in their dedicated place. Comply and follow safety and environmental instructions and participate in toolbox talks given by HSE officer. Consultation and participation at all applicable levels and functions ( ex. the development, planning, implementation, performance evaluation and actions for improvement of the OH&S management system).<br><br>Additional Requirements<br><br> Minimum 1–2 years of hands-on experience in blown film extrusion, preferably in PE films using LDPE, LLDPE and HDPE. Experience operating mono-layer and/or multi-layer blown film extrusion lines, preferably on machines such as Kiefel, W&H, Alpine, Bandera or similar. Good knowledge of extrusion process parameters and troubleshooting, including temperature, pressure, output, bubble stability, thickness variation, film width, winding and common film defects. Basic knowledge of raw materials and blending, including PE resin grades, masterbatch and additives, and their impact on processability and film quality. Technical diploma or relevant industrial background, with good awareness of safety, quality requirements, SOPs and basic production documentation.

Job Description<br><br>Job Responsibilities & Tasks: <br><br> Facilitate the work of the Quality Inspector and ensure the conformity of the product requirements with the standard finished goods specs. Ensure proper cleaning of his line during the shift and month close. Fill in the daily production report & submit it to the Production Team Leader. Set the machine properly & perform size changes. Ensure the proper handling of raw material received-returned / from-to Raw Material warehouse. Verbally inform the Lead Operator and the Line Setter of any problem that occurs on the machine. Make sure all finished goods pallets, waste bin, waste trolley and raw material are in their dedicated place. Comply and follow safety and environmental instructions and participate in toolbox talks given by HSE officer. Consultation and participation at all applicable levels and functions (ex. the development, planning, implementation, performance evaluation and actions for improvement of the OH&S management system).<br><br>Additional Requirements<br><br> Minimum 1–2 years of hands-on experience in blown film extrusion, preferably in PE films using LDPE, LLDPE and HDPE. Experience operating mono-layer and/or multi-layer blown film extrusion lines, preferably on machines such as Kiefel, W&H, Alpine, Bandera or similar. Good knowledge of extrusion process parameters and troubleshooting, including temperature, pressure, output, bubble stability, thickness variation, film width, winding and common film defects. Basic knowledge of raw materials and blending, including PE resin grades, masterbatch and additives, and their impact on processability and film quality. Technical diploma or relevant industrial background, with good awareness of safety, quality requirements, SOPs and basic production documentation.

At Air Products, we reimagine what’s possible. By tapping into the motivation of our people and our collective experience, we create the ideas and innovations that drive us forward. When we come together – where every voice is heard and everyone knows they belong and matter – we create solutions that launch people into space, support lifesaving care in hospitals, and enable the construction of groundbreaking, world scale production facilities.<br><br>Reimagine What’s Possible <br><br>The HYCO DCS Operator, reporting to the HYCO Lead/Shift Supervisor, is accountable for the day-to-day DCS Operation & Field Operation of HYCO facility, ensuring the production requirements set by the customer are achieved. HYCO DCS Operator is responsible for the safe, efficient and stable operation of the entire Hydrogen Manufacturing Unit from a centralized control room using DCS. This includes monitoring, controlling and optimizing to meet production targets, quality specifications and environmental regulations. This includes actively supporting plant performance, process optimization and production stability while maintaining strong focus on safety & compliance. The HYCO DCS Operator will execute daily tasks which include preparing and implementing safety work permits, LOTO, completing operations preventative maintenance activities, and assist the maintenance and engineering teams in preparing and executing corrective maintenance activities<br><br>Principal Accountabilities<br><br>Safety, Health & Environment<br><br>Maintain a safe & stable environment. Demonstrate leadership with all Company & Industry safe work processes to prevent all injuries. Ensure proper documentation is maintained for safety related activities. Enforce and adhere to all Safe Work Permits and Lock-out Tag-out and management of change procedures. Be the first line of response for process emergencies. Execute emergency operating procedures, initiate plant trips if necessary and direct field operators. Monitor status of Safety Instrumented System (SIS) and Fire & Gas Systems. Understand the cause & effect chart for all safety interlocks. Ensure all plant emissions (from reformer stack, vent streams) comply with environmental permits. Properly manage waste streams. Ensure the safety of all operations personnel by utilizing the BHIG Basic Safety Practice program<br><br>Technical & Operations<br><br>Operate the Steam Methane Reformer based hydrogen plant with CO2 Removal section & CO2 compression, PSA with Tail Gas compression, Membrane Unit and related utilities as prescribed by the Work Instruction Procedures Operate the pipeline network to supply Hydrogen, steam and CO2 to customers’ pipelines safely and efficiently. Report production progress and plant status to the Shift Supervisor and suggest solutions for any shortfalls. Manage plant production efficiently based on input provided by Plant Management to ensure safety and reliability targets are met to achieve maximum profitability. Ensure BHIG standards, and global best practices for EH&S, productivity, reliability, quality, and overall customer services are met. Meet the customer’s requirements regarding safety, reliability, product quality, and flexibility regarding product supply. Maintain customer communications and relationships at the ‘board’ level, ensuring customer demand rates are satisfied while maximizing the efficiency and profitability of the facility. Follow the Site Work Instruction Manuals for production & supply of Product H2, CO2 & Steam along with other operating and maintenance procedures and checklists to meet the customer’s satisfaction with safety, reliability, product quality, and flexibility of product supply while compliance with requirements. Maintain a relationship with the customer’s counterparts from other Refinery Units where from BHIG either receiving Feedstock, Utilities & Power or supplying Hydrogen and Steam to different Refinery Units on a regular basis through Refinery Shift Superintendent to ensure alignment of expectations for BHIG and the customers current and future product demand. Constantly monitor all process variables (flows, temperatures, pressures, levels, analytical values) via DCS to ensure they are within defined operating limits. Manipulate control loops, setpoints and cascades to maintain sable operations of all integrated units. Use historical data and trends to predict equipment performance degradation, identify inefficiencies and prevent potential trips and failures. Execute & supervise the detailed start up sequence for the entire plant or individual units/loops form a cold condition, warm condition or hot stand by condition, ensuring a smooth & safe transition to full load normal operations. Assist in the commissioning activities of the facility Maintain constant communication with field operators, providing instructions for equipment adjustments, isolations and rounds. Liaise with the maintenance team to co-ordinate equipment preparation for maintenance (isolation, purging & blinding) and safe taking equipment back in line. Conduct detailed and accurate shift handovers with incoming operators, highlighting any abnormalities, ongoing work and special instruction. Follow shift turnover protocols to ensure a safe and efficient handover to the following shift. Maintain accurate and timely logs of operating parameters, significant events and production data. Fully accountable to ensure his logs and that his operator’s logs are accurate and compliant with published matrix. Identify the root cause of process deviations and equipment malfunction. Work with engineers to implement long-term solutions. Suggest and participate in operational improvements and de-bottlenecking projects to enhance safety, reliability and profitability. Ensure compliance with all CM, PM tasks & Environmental Regulatory requirements. Support and prepare for Shutdown Planning and Turnaround Planning. Provide coaching and motivation with the field operations team to achieve operational excellence and customer satisfaction. Establish & maintain close working relationships with engineering and maintenance personnel to continuously monitor & evaluate plant systems & equipment performance. Ensure compliance with process safety, MOC’s, and OPHR requirements. Provide operations support and participate in investigations and Root Cause Analysis to identify & implement sustainable corrective actions. Facilitate attainment of operational excellence and customer satisfaction via operations productivity, reliability, quality, and continuous improvement initiatives. Communication of plant activities with other shifts to maintain continuity between shifts for a safe and reliable operation. Execute other duties as assigned by reporting managers in a timely and efficient manner.<br><br>Minimum Requirements And Qualifications<br><br>Bachelor’s degree in chemical, Mechanical, or Chemical Process Operations with 10 years’ experience preferred. An Associate Technical Degree (2-year certificate) will be considered based on years of experience and competence. Experience in DCS Operation & Field Operation, with minimum of 5 years’ Lead DCS Operations Experience in SMR based Hydrogen or Ammonia or Methanol or Syngas plant as DCS Operator. Proficiency with DCS platforms (e.g. Yokogawa Centum VP, Siemens PCS 7) Deep understanding of Chemical Engineering Principles, thermodynamics and process control. Wide technical knowledge in operations, engineering, and maintenance activities Ability to maintain high level of awareness and make sound decisions under pressure. Strong problem solving and diagnostic abilities. Clear, concise and effective verbal and written communication. Proficiency in English speaking and writing. Ability to communicate with the customer at the board level daily. Able to communicate between operations and maintenance teams. Deep understanding of Chemical Engineering Principles, thermodynamics and process control A strong commitment to employee involvement, team building and diversity.<br><br>Founded in 1940, Air Products is a world-leading industrial gases company and has a proud history of innovation, operational excellence, with an unwavering commitment to safety and environmental stewardship. Working together, we are taking our passion and diverse backgrounds forward to reimagine what’s possible and generate a cleaner future for our customers, our communities, and the world.

At Air Products, we reimagine what’s possible. By tapping into the motivation of our people and our collective experience, we create the ideas and innovations that drive us forward. When we come together – where every voice is heard and everyone knows they belong and matter – we create solutions that launch people into space, support lifesaving care in hospitals, and enable the construction of groundbreaking, world scale production facilities.<br><br>Reimagine What’s Possible <br><br>ABOUT THE COMPANY:<br><br>BHIG—Blue Hydrogen Industrial Gases is a regional development and investment joint venture (JV) between Saudi Aramco and Air Products Qudra “APQ”. Our company benefits from the combined strengths of two leading entities. BHIG is positioned to drive industrial innovation and operational excellence across Saudi Arabia and the region. BHIG focuses on supporting clean energy goals through low-carbon hydrogen production.<br><br>Reimagine What’s Possible<br><br>The HYCO Lead Operator, reporting to the HYCO Shift Supervisor, is accountable for the day-to-day DCS & Field Operation of HYCO facility, ensuring the production requirements set by the customer are achieved. HYCO Lead Operator is responsible for the safe, efficient and stable operation of the entire Hydrogen Manufacturing Unit from a centralized control room using DCS. This includes monitoring, controlling and optimizing to meet production targets, quality specifications and environmental regulations. This includes actively supporting plant performance, process optimization and production stability while maintaining strong focus on safety & compliance. The HYCO Lead Operator will execute daily tasks which include preparing and implementing safety work permits, LOTO, completing operations preventative maintenance activities, and assist the maintenance and engineering teams in preparing and executing corrective maintenance activities. Lead operator will handle the Shift lead responsibility in absence of Shift supervisor ensuring the business continuity.<br><br>Principal Accountabilities<br><br>Safety, Health & Environment<br><br>Maintain a safe & stable environment. Demonstrate leadership with all Company & Industry safe work processes to prevent all injuries. Ensure proper documentation is maintained for safety related activities. Enforce and adhere to all Safe Work Permits and Lock-out Tag-out and management of change procedures. Be the first line of response for process emergencies. Execute emergency operating procedures, initiate plant trips if necessary and direct field operators. Monitor status of Safety Instrumented System (SIS) and Fire & Gas Systems. Understand the cause & effect chart for all safety interlocks. Ensure all plant emissions (from reformer stack, vent streams) comply with environmental permits. Properly manage waste streams. Ensure the safety of all operations personnel by utilizing the BHIG Basic Safety Practice program <br><br>Technical & Operations<br><br>Operate the Steam Methane Reformer based hydrogen plant with CO2 Removal section & CO2 compression, PSA with Tail Gas compression, Membrane Unit and related utilities as prescribed by the Work Instruction Procedures Operate the pipeline network to supply Hydrogen, steam and CO2 to customers’ pipelines safely and efficiently. Report production progress and plant status to the Shift Supervisor and suggest solutions for any shortfalls. Manage plant production efficiently based on input provided by Plant Management to ensure safety and reliability targets are met to achieve maximum profitability. Ensure BHIG standards, and global best practices for EH&S, productivity, reliability, quality, and overall customer services are met. Meet the customer’s requirements regarding safety, reliability, product quality, and flexibility regarding product supply. Maintain customer communications and relationships at the ‘board’ level, ensuring customer demand rates are satisfied while maximizing the efficiency and profitability of the facility. Follow the Site Work Instruction Manuals for production & supply of Product H2, CO2 & Steam along with other operating and maintenance procedures and checklists to meet the customer’s satisfaction with safety, reliability, product quality, and flexibility of product supply while compliance with requirements. Maintain a relationship with the customer’s counterparts from other Refinery Units where from BHIG either receiving Feedstock, Utilities & Power or supplying Hydrogen and Steam to different Refinery Units on a regular basis through Refinery Shift Superintendent to ensure alignment of expectations for BHIG and the customers current and future product demand. Constantly monitor all process variables (flows, temperatures, pressures, levels, analytical values) via DCS to ensure they are within defined operating limits. Manipulate control loops, setpoints and cascades to maintain sable operations of all integrated units. Use historical data and trends to predict equipment performance degradation, identify inefficiencies and prevent potential trips and failures. Execute & supervise the detailed start up sequence for the entire plant or individual units/loops form a cold condition, warm condition or hot stand by condition, ensuring a smooth & safe transition to full load normal operations. Assist in the commissioning activities of the facility Maintain constant communication with field operators, providing instructions for equipment adjustments, isolations and rounds. Liaise with the maintenance team to co-ordinate equipment preparation for maintenance (isolation, purging & blinding) and safe taking equipment back in line. Conduct detailed and accurate shift handovers with incoming operators, highlighting any abnormalities, ongoing work and special instruction. Follow shift turnover protocols to ensure a safe and efficient handover to the following shift. Maintain accurate and timely logs of operating parameters, significant events and production data. Fully accountable to ensure his logs and that his operator’s logs are accurate and compliant with published matrix. Identify the root cause of process deviations and equipment malfunction. Work with engineers to implement long-term solutions. Suggest and participate in operational improvements and de-bottlenecking projects to enhance safety, reliability and profitability. Ensure compliance with all CM, PM tasks & Environmental Regulatory requirements. Support and prepare for Shutdown Planning and Turnaround Planning. Provide coaching and motivation with the field operations team to achieve operational excellence and customer satisfaction. Establish & maintain close working relationships with engineering and maintenance personnel to continuously monitor & evaluate plant systems & equipment performance. Ensure compliance with process safety, MOC’s, and OPHR requirements. Provide operations support and participate in investigations and Root Cause Analysis to identify & implement sustainable corrective actions. Facilitate attainment of operational excellence and customer satisfaction via operations productivity, reliability, quality, and continuous improvement initiatives. Communication of plant activities with other shifts to maintain continuity between shifts for a safe and reliable operation. Execute other duties as assigned by reporting managers in a timely and efficient manner. <br><br>Minimum Requirements And Qualifications<br><br>Bachelor’s degree in chemical, Mechanical, or Chemical Process Operations with 10 years’ experience preferred. An Associate Technical Degree (2-year certificate) will be considered based on years of experience and competence. Experience in DCS Operation & Field Operation, with minimum of 5 years’ Lead DCS Operations Experience in SMR based Hydrogen or Ammonia or Methanol or Syngas plant as DCS Operator. Proficiency with DCS platforms (e.g. Yokogawa Centum VP, Siemens PCS 7) Deep understanding of Chemical Engineering Principles, thermodynamics and process control. Wide technical knowledge in operations, engineering, and maintenance activities Ability to maintain high level of awareness and make sound decisions under pressure. Strong problem solving and diagnostic abilities. Clear, concise and effective verbal and written communication. Proficiency in English speaking and writing. Ability to communicate with the customer at the board level daily. Able to communicate between operations and maintenance teams. Deep understanding of Chemical Engineering Principles, thermodynamics and process control A strong commitment to employee involvement, team building and diversity.<br><br>Founded in 1940, Air Products is a world-leading industrial gases company and has a proud history of innovation, operational excellence, with an unwavering commitment to safety and environmental stewardship. Working together, we are taking our passion and diverse backgrounds forward to reimagine what’s possible and generate a cleaner future for our customers, our communities, and the world.

A Snapshot of Your Day<br><br>As a Logistics Operator at Siemens Energy, you will target candidates with a foundational background in logistics, supply chain management, or related fields, particularly those with hands-on experience in shipping and transportation. You will engage in meaningful projects that involve coordinating shipments, preparing documentation, and ensuring the timely movement of materials and equipment, directly impacting operational efficiency and client satisfaction. Expect to thrive in a collaborative team culture that values attention to detail, effective communication, and a commitment to compliance and safety standards, all while supporting Siemens Energy’s mission of delivering reliable and sustainable energy solutions.<br><br>How You’ll Make An Impact<br><br>Coordinate inbound and outbound shipment activities in line with delivery schedules and operational requirements.<br><br>Arrange shipment bookings with approved freight forwarders and transportation service providers.<br><br>Track shipment progress and provide timely updates to relevant stakeholders.<br><br>Prepare, collect, and maintain shipping documents and logistics records, ensuring compliance with regulations.<br><br>Support customs clearance activities by coordinating with customs brokers and internal stakeholders.<br><br>Collaborate with Procurement, Warehouse, Production, and Project teams to ensure material availability and delivery requirements.<br><br>What You Bring<br><br>Diploma or Bachelor’s Degree in Logistics, Supply Chain Management, Business Administration, or a related field.<br><br>1-3 years of experience in logistics, transportation, shipping, warehouse operations, or supply chain functions.<br><br>Familiarity with shipping documentation and customs clearance activities is preferred.<br><br>Strong organizational and coordination skills with attention to detail and accuracy.<br><br>Effective communication and teamwork skills.<br><br>Basic knowledge of ERP/SAP systems is preferred, with the ability to manage multiple tasks and deadlines.<br><br>About The Team<br><br>Our Grid Technology division enables a reliable, sustainable, and digital grid. The power grid is the backbone of the energy transition. Siemens Energy offers a leading portfolio and solutions in HVDC transmission, grid stabilization and storage, high voltage switchgears and transformers, and digital grid technology.<br><br>Who is Siemens Energy?<br><br>At Siemens Energy, we are more than just an energy technology company. With ~100,000 dedicated employees in more than 90 countries, we develop the energy systems of the future, ensuring that the growing energy demand of the global community is met reliably and sustainably. The technologies created in our research departments and factories drive the energy transition and provide the base for one sixth of the world's electricity generation.<br><br>Our global team is committed to making sustainable, reliable, and affordable energy a reality by pushing the boundaries of what is possible. We uphold a 150-year legacy of innovation that encourages our search for people who will support our focus on decarbonization, new technologies, and energy transformation.<br><br>Find out how you can make a difference at Siemens Energy: https://www.siemens-energy.com/employeevideo<br><br>Our Commitment to Diversity<br><br>Lucky for us, we are not all the same. Through diversity we generate power. We run on inclusion and our combined creative energy is fueled by over 130 nationalities. Siemens Energy celebrates character – no matter what ethnic background, gender, age, religion, identity, or disability. We energize society, all of society, and we do not discriminate based on our differences.<br><br>Rewards/Benefits<br><br>Competitive Salary Package Targeted Bonus Opportunities to work on a variety of innovative projects<br><br><br>https://jobs.siemens-energy.com/jobs

Key Job Responsibilities:<br>Operate CNC fiber laser cutting machine as per production plan. Load/unload raw materials (sheet metal) properly. Read and interpret technical drawings and cutting programs. Perform machine setup, parameter adjustments, and basic troubleshooting. Ensure cutting quality meets specifications (dimensions, edge quality). Minimize material waste and optimize sheet utilization. Perform routine machine cleaning and basic maintenance. Follow all safety procedures and housekeeping standards. Report machine issues or breakdowns immediately.<br>Competencies:<br>Ability to read technical drawings. Knowledge of sheet metal fabrication processes. Basic CNC programming understanding. Strong attention to detail and quality.<br><br>Professional Skills:<br>Ability to use the measurement tools (Caliper – tape – protractor). Ability to use the hand tools (hand drill – spanner – screw driver ). Willing to learn and improve.<br>Experience:<br>Minimum 2–5 years experience operating CNC laser cutting machines. Experience with fiber laser machines is a must.<br>Qualifications:<br>Technical diploma or equivalent.

Overview<br>OiLSERV is a provider of an expanding range of oilfield services, including well logging, well testing, production enhancement, drilling services, surface production management and integrated oilfield services. OILSERV is an independent Oilfield Service Company, focused on the Middle East and North Africa and aims to supply our Home Markets with world-class quality and services, driven by the passion and commitment of our people. OILSERV is a trusted business partner of choice, dedicated to building lasting relationships, adding value to our customers, projects and the communities in which we operate. We establish technology-driven partnerships and adopt optimized and effective solutions to meet the demands of our Home Markets. We empower our employees and partners with the skills and expertise they need to secure positive results. Equipped with optimum resources, OILSERV delivers quality services on an international platform. We implement best practices to facilitate continued success and sustainability. OILSERV’s local insight, combined with industry knowledge, enables us to ensure optimum service delivery, world-class practices, exemplary performance and a heightened customer experience. OILSERV is committed to conducting business with integrity, maintaining efficiency and engineering effective solutions for our customers. OILSERV remains focused on the continued growth of our organization and to safeguarding success and sustainability for all of our employees, customers and shareholders. Websitehttp://www.oilserv.comVerified page <br>Industry Oil and Gas Company size1,001-5,000 employees2,451 associated members Linked In members who’ve listed Oil SERV as their current workplace on their profile.<br>Specialties Oilfield Services<br>About the Role<br><br>You’ll lead onsite operations, support teams, ensure HSE and SQ compliance, and solve complex technical challenges. This role provides opportunities for professional development, continuous learning, and ability to deliver innovative solutions for our customers.<br><br>Responsibilities<br><br>Mobilize and operate company Coiled Tubing equipment to and from job sites following convoy and safety procedures. Participate in pre‑job risk analyses to identify and mitigate potential hazards. Promote company‑approved safety and operational policies at the wellsite, ensuring both Company and Customers Job objectives are achieved. Rig up and rig down Equipment per Company and Customer Standards. Prepare and mix chemicals according to Job procedures. Operate auxiliary equipment, troubleshoot and report defects to Field Supervisor. Build required skills as outlined in the Competency Task Sheet. Perform preventive maintenance and keep equipment clean and job‑ready. Inspect and repair treating connections as needed. Complete all required job logs, checklists and reports. Maintain a clean and organized base yard and Coiled Tubing equipment. Attend required HSE training and support Service Quality initiatives. Execute jobs according to Job program and Customers requirements, applying Management of Change (MOC) when required. Review and ensure Service Quality (SQ) compliance before and during job execution. Ensure all job execution is carried out safely, efficiently, and professionally. Mentor junior equipment operators, supporting their skill development in safe and efficient manner.

have licence and experience 5 years<br>‏⁦⁩نصائح: قدم ملخصًا للوظيفة وكيف يبدو النجاح في منصبك، وكيف تتناسب هذه الوظيفة مع المنظمة بشكل عام.⁦<br>⁩<br>⁦⁩المسؤوليات⁦⁩<br>⁦⁩[كن محددًا عند وصف كل مسؤولية من المسؤوليات. استخدم لغة محايدة الجنس وشاملة للجميع.]⁦<br>⁩⁦⁩مثال: تحديد متطلبات المستخدم للنظم في الإنتاج وتطويرها، لضمان أقصى قدر من قابلية الاستخدام⁦<br>⁩<br>⁦⁩المؤهلات⁦⁩<br>⁦⁩[بعض المؤهلات التي قد ترغب في تضمينها هي المهارات أو التعليم أو الخبرة أو الشهادات.]⁦<br>⁩⁦⁩مثال: مهارات تواصل لفظية ومكتوبة ممتازة⁦⁩

At H&P, our people are our strength.<br>JOB SUMMARY:<br>Assisting rig moves by preparing lifting plans for rigging and as described but not limited to the Duties and Responsibilities listed below.<br>RESPONSIBILITIES:· Approve and ensure the proper identification and calculation of lift arrangements and capacities.· Approve and ensure proper calculation of required sling size based on properly identified load weight.· Attach loads utilizing proper Center of Gravity (COG), select proper hitch to hold and control the load, to include tandem lifts, man-basket, and all other designated critical lift operations.· Ensure and approve detailed inspection of all rigging equipment prior to use to ensure no defect with all equipment used within guidelines.· Set up and perform the designed lifting plan to ensure both rigging and loads are protected during the lift· Creation and execution of multi-legged lifts while allowing for D/d ratio on the wire rope as per approved requirement.· Creation and execution of choker hitch lifts while allowing for reduction on the slings· Calculate Sling Angle Stress· Perform correct hand signaling and deliver proper radio communication to ensure proper load control· Use bridle and crane load charts in the creation of lifting plans· Utilize conversion charts to ensure proper conversion from Metric to Imperial measurements· Calculating areas and volumes of identified loads· Be a Team player and a leader.· Excellent Communications skills.· Demonstrates the H&P Company values: Actively C. A. R. E., Service Attitude, Innovative Spirit, and Teamwork.<br>KNOWLEDGE, SKILLS AND ABILITIES:· Ability to read and comprehend simple instructions, short correspondence, and memos, all in English, write simple correspondence,<br>Effectively present information in one-on-one and small group situations to customers, clients and/or employees of the organization· Determining the kind of tools and equipment needed to do a job· Using logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions or approaches to problems.· Obtaining and seeing to the appropriate use of equipment, facilities, and materials needed to do certain work.<br>EDUCATION and Certification:· High school as a minimum or higher.· Possess a valid Saudi Aramco-approved Rigger Level 1 certification with 6 months minimum validity<br>WORK EXPERIENCE:· Have a minimum of 3 to 5 years (or more, depending on the specific project) of experience in oil & gas, petrochemical, or industrial rigging operations. Working knowledge of Saudi Aramco’s Safety Management System (SMS) and Permit to Work (PTW) processes is an added advantage<br><br>LANGUAGES:· Fluent English and Arabic.

<strong><strong>CNC Operator</strong></strong><strong>Introduction:</strong><br><p>We are looking for a skilled CNC Machine Operator to join our growing manufacturing team. In this role, you will be responsible for setting up, operating, and maintaining CNC equipment to produce high-quality precision parts. If you have a keen eye for detail, a passion for working with advanced machinery, and the ability to read technical drawings, this is an excellent opportunity to grow your career in a dynamic production environment.</p><br><strong>Key Responsibilities:</strong><br><ul><br> <li>Set up and operate CNC machines (mills, lathes, or routers) according to specifications.</li><br> <li>Read and interpret blueprints, technical drawings, and work orders.</li><br> <li>Select, install, and adjust tools, fixtures, and materials for each job.</li><br> <li>Monitor machine operations and make adjustments as needed to maintain tolerances.</li><br> <li>Perform routine maintenance and cleaning of machines to ensure proper function.</li><br> <li>Inspect finished parts using calipers, micrometers, gauges, and other precision instruments.</li><br> <li>Document production data, quality checks, and maintenance activities.</li><br> <li>Troubleshoot machine errors and collaborate with supervisors or maintenance when issues arise.</li><br> <li>Follow safety protocols and maintain a clean, organized work area.</li><br></ul><br><strong>Requirements and Skills:</strong><br><ul><br> <li>High school diploma or equivalent; technical/vocational training preferred.</li><br> <li>Proven experience as a CNC machine operator or in a similar manufacturing role.</li><br> <li>Ability to read and interpret blueprints, schematics, and technical documents.</li><br> <li>Proficiency with precision measuring tools (calipers, micrometers, gauges, etc.).</li><br> <li>Strong attention to detail and commitment to quality.</li><br> <li>Mechanical aptitude and problem-solving skills.</li><br> <li>Willingness to work in a fast-paced, team-oriented environment</li><br> <li>Saudi national residing in or close to Dammam</li><br></ul><br><p>------</p>

<p>dnata is a partner to the world`s best airlines, travel management organizations and leading brands in the travel industry. Our experience covers business travel management, worldwide tour operations, group and incentive arrangements, specialized management services, advanced information technology systems and travel retailing.</p><p>At dnata a culture of excellence guides every aspect of our business, we take immense pride in the way we have achieved award winning service standards through a process of continuous product innovation and maintaining high service standards.</p><p><br></p><p>The jobholder is front-line staff, who has to provide clients and potential clients superior and a consistent quality of travel services to sell Airline tickets, travel related products, give leisure related information and Groups and Events service. Convert maximum number of enquiries into ticketed sales, through efficient and friendly customer service.</p><p><br></p><p><strong>In This Role, You Will:</strong></p><p><br></p><ul><li>Provide the highest standard of customer service to all clients whether Retail, Government, or, Corporate, using all tools that are made available. Attend all customer queries in a timely and appropriate manner.</li><li>Offer products, services, and loyalty programs that are contracted by dnata Travel and offer information on destination and product to all customers to ensure that it meets their travel requirements.</li><li>Maximize the sales/consultation opportunity to cross-sell/upsell any relevant auxiliary product to maximize revenue.</li><li>Make travel-related reservations and issue tickets to clients, taking care that all relevant airline/hotel/any product rules and regulations have been compiled with, and that the product delivered is commensurate with client requirements and expectations. Recommend alternate Classes of Travel, routes or carriers, in the case of non-availability of requested seats, and effectively sell space (keeping in mind carriers that have been Prioritised by the Department) and products to increase revenues for Dnata, seeking at the same time opportunities to up-sell and cross-sell, using front office tool or any other System made available by the department.</li><li>Inform customers about mandatory requirements covering their journeys such as passport, visa, health, and Insurance requirements as well as other details such as check-in place and time.</li><li>Maintain excellent working relationships with clients to update them on new products and services while at the same time work towards constantly improving working relationships.</li><li>Adhere to all of the set standards of DSS (dnata service standard), and any internal audit standards to ensure that we comply with the expected benchmark defined by the customer audit team.</li><li>Read, assimilate and implement all changes to dnata front or back office system, Airline Fares, schedules and other relevant procedures, filing if necessary relevant information/material for reference, to deliver a superior service to clients.</li><li>Ensure all revenue documents issued are correctly reported on a daily basis, in the Back Office System to enable accurate invoicing by Sales and Revenue Accounts Department or the Lodged Card Operator, as the case may be. Also ensure all the relevant information updated as per corporate client requirement while generating the invoice.</li></ul><p><br></p><p><br></p><p><strong>To be considered for this role, you must meet the below requirements:</strong></p><p><br></p><ul><li>Degree or Honours (12+3 or equivalent), Prefer a University degree in Travel and Tourism or a related discipline.</li><li>Excellent knowledge of geography and arithmetic.</li><li>Excellent interpersonal ability, telephone and customer service skills to be able to interact with internal and external clients in a professional manner.</li><li>Knowledge of Airline Reservation systems.</li><li>English: Strong verbal and written English is mandatory.</li></ul><p><br></p><p><br></p><p>At dnata, we're committed to providing our Employees with opportunities to grow and develop in their careers. So, if you're looking for a challenging and rewarding opportunity, apply today and join our team!</p>

<p><strong>Company Description</strong> ELAWYEEN TRAVEL AND TOURS is a growing travel and tourism company based in Al Khobar, dedicated to providing reliable, customer-focused travel services. The company offers a range of services such as trip planning, ticketing, accommodation arrangements, and tailored tour packages for individuals and groups. ELAWYEEN TRAVEL AND TOURS aims to deliver seamless travel experiences through efficient operations and strong relationships with clients and partners. The organization values professionalism, service quality, and continuous improvement to meet the evolving needs of travelers. Team members are encouraged to contribute ideas, uphold high ethical standards, and support a collaborative work environment.</p><p><strong>Role Description</strong> The Executive Director is a full-time, on-site leadership role based in Al Khobar, responsible for overseeing all aspects of ELAWYEEN TRAVEL AND TOURS’ operations and strategic direction. This role includes managing day-to-day business activities, supervising department leaders, and ensuring that service delivery meets company standards and regulatory requirements. The Executive Director will develop and implement business strategies, monitor financial performance, manage budgets, and identify opportunities for growth in the travel and tourism market. Daily tasks include building and maintaining relationships with clients, vendors, and strategic partners, leading business development initiatives, and guiding marketing and sales efforts. The role also involves establishing operational policies, leading staff performance management, fostering a positive workplace culture, and reporting regularly to ownership or the board on progress and challenges.</p>I manage "Ela Wain" Travel and Tourism Agency, a subsidiary of Rukn Al-Baraka Al-Arabia Ltd. The agency offers services such as flight and hotel bookings, international driving permits, tour package arrangements, and other related services. My operational plan involves formulating a strategy to maintain the agency's market position while driving its growth; navigating the competitive landscape requires striking a balance to ensure long-term viability.<br>My role entails managing and developing staff, encouraging their professional growth to ensure business success, and devising plans and programs to foster development. I also oversee financial operations—including budget preparation and financial planning—and build relationships with corporate and individual clients, as well as strategic partners, to ensure continued success in the market.