Tour operator Jobs - Qassim Saudi

<p>&nbsp;</p><p>Execute aircraft exterior cleaning tasks according to the work plan.</p><p>Inspect equipment and machinery before operation and ensure their safety.</p><p>Adhere to safety and security instructions within the airport.</p><p>Use authorized cleaning materials and equipment according to instructions.</p><p>Report any malfunctions or technical issues to the direct supervisor.</p><p>Perform simple operational cleaning and maintenance of equipment within authorized limits.</p><p>Maintain the equipment and tools used during work.</p><p>Adhere to working hours and operational schedules.</p><p>Collaborate with the operations team to accomplish required tasks.</p><p>Commit to wearing personal protective equipment.</p><p>Prepare operational reports on the status of equipment when needed.</p>

Job Summary:Monitor and control of the Unit/plant Operation parameters and coordinate with the other Operators in regard to all related activities that affect operation.<br>Roles & Responsibilities:Comply with safety rules and regulations. Be familiar with the fire equipment in his area. Familiar with plant P&IDs, SOPs, Work instructions, Operation and control logics as well as the emergency operation procedures and any other related documents. Monitor all parameters of the unit and enter periodic readings on log sheets. Summarize all activities/events that took place during his shift in the log book. Follow the instructions of the Shift Charge Engineer and Shift Supervisor and coordinate with other Operators in regard to all activities. Be alert and take quick actions during abnormal operating conditions. Coordinate and ensure Lock Out & Tag Out during the isolation of equipment for maintenance as per the approved Permit To Work procedure. Normalize the equipment after cancellation when instructed to do so. Inspect the unit and auxiliaries during the shift to make sure that all equipment parameters are within limits. Report abnormalities to the Shift Supervisor/ SCE. Perform the periodic protection tests under the supervision of SCE/Supervisor and maintain records. Perform equipment change over according to preset schedules. Raise work requests or defect notes for faulty equipment and follow up for the defect rectification. Assist in the training and familiarization of new operators. Report near misses and implement prescribed risk controls. Report deviations in Quality, Health, Safety and Environmental Management System. Ensure proper waste disposal measures. Perform other duties as assigned.<br>Job Specifications:<br>Education: Bachelor of Engineering / Diploma in Engineering is a must.<br>Minimum Experience: 5 years in the same position.<br>Required Skills:Generic awareness of Quality, Occupational Health & Safety and Environment Management system principles Knowledge of identification, classification and disposal of waste Knowledge of Emission Monitoring Knowledge of environmental and health impact of chemicals being used in the plant Knowledge of firefighting equipment Knowledge of PPE and safety equipment Knowledge of First aid measures Should be well conversed with Power/Water plant operational activities. Interpersonal communication skills. Analytical skills. Hazard Risk Assessment capability Aspect Impact Assessment knowledge. Basic computer skills<br>Desired certification / Job specific skill / Training: ISO9001, 14001, OHSAS 18001 awareness/working knowledge is preferred.<br>Work Condition: Ready to work in remote location.

<p><strong>Position Title: Senior Site Commissioning Engineer - BESS</strong></p><p><strong>Email Id - recruitment.me@tractebel.engie.com </strong></p><p><strong>While Applying - please mention in subject line - Position and Location as Qassim Region, Saudi Arabia</strong></p><p><strong>1. Job Summary</strong></p><p><strong>Why does this role exist? </strong></p><p><br></p><p><em>Tractebel has been appointed as the Owner's Engineer for the Al Khushaybi Battery Energy Storage System (BESS) Independent Power Project (IPP) in the Al Qassim Region, Kingdom of Saudi Arabia. The project is being developed by ENGIE and its consortium partners under the Saudi Power Procurement Company (SPPC) Battery Energy Storage Program. The Al Khushaybi BESS facility has a capacity of 500 MW with 4 hours of storage duration(2,000MWh).</em></p><p><em> </em></p><p><em> </em></p><p><em>As Owner's Engineer, Tractebel is responsible for providing independent technical oversight and assurance throughout the project lifecycle, including design review, engineering management, technology assessment, construction supervision, testing and commissioning support, and verification of compliance with contractual, regulatory, and international technical standards.</em></p><p><br></p><p><em>This role exists to support the successful delivery of one of Saudi Arabia's flagship utility-scale energy storage projects by ensuring technical excellence, project quality, safety, reliability, and timely execution. The position will contribute to the integration of large-scale renewable energy into the Kingdom's power system, enhance grid stability and operational flexibility, and support Saudi Arabia's vision of increasing renewable energy penetration and achieving a more sustainable and resilient electricity network. </em></p><p><br></p><p><em>The successful candidate will play a key role in coordinating with the Developer, EPC Contractors, OEMs, Grid Operator, SPPC, and other project stakeholders to ensure that project objectives are achieved in accordance with schedule, budget, and performance requirements while meeting international best practices for utility-scale Battery Energy Storage Systems.</em></p><p><br></p><p><br></p><p><br></p><p><strong>2. Responsibilities</strong></p><ul><li><em>Develop and implement commissioning strategies, procedures, schedules, and test plans for the BESS plant, substation, and associated balance-of-plant systems.</em></li><li><em>Review EPC contractor commissioning documentation, including Method Statements, Inspection &amp; Test Plans (ITPs), Commissioning Procedures, and Energization Plans.</em></li><li><em>Coordinate commissioning activities between the Developer, Owner's Engineer, EPC Contractor, OEMs, Grid Operator, and other project stakeholders.</em></li><li><em>Verify readiness for commissioning by ensuring completion of construction activities, punch point closure, documentation availability, and safety compliance.</em></li><li><em>Witness and validate Factory Acceptance Tests (FAT), Site Acceptance Tests (SAT), and Performance Tests for BESS equipment and electrical systems.</em></li><li><em>Supervise pre-commissioning activities including equipment inspections, cable continuity checks, insulation resistance tests, grounding system verification, and protection system testing.</em></li><li><em>Oversee commissioning and energization of Battery Energy Storage System components, including:</em></li><li><em>Battery Racks and Containers</em></li><li><em>Battery Management System (BMS)</em></li><li><em>Energy Management System (EMS)</em></li><li><em>Power Conversion System (PCS)</em></li><li><em>Inverters and Transformers</em></li><li><em>HVAC and Fire Protection Systems</em></li><li><em>Auxiliary Systems</em></li><li><em>Manage commissioning and testing of HV/MV substations, including:</em></li><li><em>Power Transformers</em></li><li><em>GIS/AIS Switchgear</em></li><li><em>Protection and Control Systems</em></li><li><em>SCADA Systems</em></li><li><em>Communication Networks</em></li><li><em>Metering Systems</em></li><li><em>Reactive Power Equipment</em></li><li><em>Witness relay protection testing, protection coordination verification, and end-to-end testing of communication and control schemes.</em></li><li><em>Coordinate grid compliance testing and support successful grid synchronization in accordance with transmission system operator and utility requirements.</em></li><li><em>Verify functionality of BESS operating modes, including charging, discharging, frequency response, voltage support, peak shaving, black start support (if applicable), and ancillary services.</em></li><li><em>Monitor commissioning progress, identify technical issues, and coordinate timely resolution with contractors and equipment suppliers.</em></li><li><em>Ensure all commissioning activities are executed in accordance with project specifications, international standards (IEC, IEEE, NFPA), local regulations, and HSE requirements.</em></li><li><em>Lead system handover activities, punch-list management, and operational readiness assessments.</em></li><li><em>Support reliability run tests, capacity tests, performance guarantee tests, and final acceptance testing.</em></li><li><em>Review and validate commissioning reports, test records, as-built documentation, and operation &amp; maintenance manuals.</em></li><li><em>Provide technical support during initial operation, defects liability period, and project close-out activities.</em></li><li><em>Identify project risks related to commissioning and energization activities and implement effective mitigation measures.</em></li><li><em>Ensure compliance with Saudi Electricity Company (SEC), National Grid SA, SPPC, and applicable project contractual requirements.</em></li></ul><p><br></p><p><br></p><p><strong>3. Education</strong></p><p><strong>Mandatory</strong></p><ul><li><em>Bachelor’s degree in Electrical Engineering</em></li><li><em>Must Have Substation Experience in KSA with SEC &amp; National Grid</em></li></ul><p><strong>Preferred</strong></p><p>☑<em>Relevant professional certification related to the role/discipline</em></p><p>☑<em>Professional membership or accreditation, where applicable</em></p><p>o <em>Software/system/tool certification relevant to the role</em></p><p>☑<em>Must Have Substation Experience in KSA</em> </p><p>☑ <em>Experience with BESS integration along with Grid preferable</em></p><p><br></p><p><strong>4.Languages:</strong></p><p><strong> </strong></p><p><em>Select the required/preferred languages</em></p><p>☑English </p><p>☑Arabic</p><p><br></p><p><strong>5. Experience and skills</strong></p><p><em>List the mandatory years of experience, sector/project exposure, role level and any specific experience required for the position.</em></p><p><br></p><p>1. <em>Minimum 8 years of Experience </em></p><p>2. <em>Substation Experience with Saudi Electricity company &amp; National Grid</em></p><p>3.<em> Must have Utility Scale BESS experience</em></p>

<h3>About the Role</h3><p>Acwa China is seeking a <strong>Mechanical Technician</strong> to join their team in Al Qassim. This full-time role involves executing preventive, corrective, and condition-based maintenance activities under the direction of a Mechanical Supervisor/Engineer. The position requires strict adherence to safety requirements and includes participation in annual outages and equipment overhauls.</p><h3>Key Responsibilities</h3><ul><li>Comply with all applicable safety rules and regulations.</li><li>Perform plant maintenance activities in a timely and safe manner, strictly following applicable maintenance procedures and work instructions.</li><li>Document equipment maintenance concerns and history.</li><li>Report spare parts and consumable requirements to the Mechanical Supervisor and support monitoring of spare availability.</li><li>Ensure proper equipment isolation before starting maintenance activities, in coordination with the Mechanical Supervisor and local operator.</li><li>Troubleshoot and diagnose equipment problems and perform required maintenance within the assigned area.</li><li>Install, adjust, inspect, service, and repair various static and rotating mechanical equipment used in Power and Desalination Plants.</li><li>Ensure proper care and safe use of tools, lifting equipment, and other devices required for maintenance activities.</li><li>Carry out all necessary preparations for mechanical maintenance of assigned equipment and areas.</li><li>Maintain a good working knowledge of equipment operation and associated operating systems.</li><li>Maintain 5S housekeeping standards within the assigned work area.</li><li>Perform other duties as assigned.</li></ul><h3>Qualifications and Experience</h3><ul><li>A minimum of <strong>5 to 10 years of experience</strong> in mechanical maintenance.</li><li>Demonstrated ability to perform preventive, corrective, and condition-based maintenance.</li><li>Proficiency in troubleshooting and diagnosing mechanical equipment issues.</li><li>Strong understanding of safety regulations and maintenance procedures.</li></ul><h3>Work Environment</h3><p>This position requires readiness to work in a <strong>remote location</strong> within Al Qassim. The role is full-time and involves working within power and desalination plants.</p><h3>Application Process</h3><p>Interested candidates are encouraged to apply. Salary details will be discussed during the interview process.</p>

<h3>About the Role</h3><p>Acwa Operations is seeking a <strong>CCR Operator</strong> to join their team in Al Qasim, Saudi Arabia. This full-time role involves monitoring and controlling unit/plant operating parameters and coordinating with other operators on activities affecting plant operations. The position requires 5-10 years of relevant experience.</p><h3>Key Responsibilities</h3><ul><li>Comply with all safety rules and regulations and maintain familiarity with firefighting equipment in the assigned area.</li><li>Understand plant P&amp;IDs, SOPs, work instructions, operation and control logic, and emergency operating procedures.</li><li>Monitor unit parameters, record periodic readings on log sheets, and summarize shift activities and events in the logbook.</li><li>Follow instructions from the Shift Charge Engineer and Shift Supervisor, coordinating operational activities with other operators.</li><li>Respond promptly and effectively to abnormal operating conditions.</li><li>Coordinate and ensure Lock Out &amp; Tag Out (LOTO) procedures during equipment isolation for maintenance, adhering to the approved Permit to Work (PTW) procedure. Normalize equipment as instructed after cancellation.</li><li>Inspect the unit and auxiliaries during shifts to ensure equipment parameters are within acceptable limits, reporting any abnormalities to the Shift Supervisor / Shift Charge Engineer.</li><li>Perform periodic protection tests under supervision and maintain records. Execute equipment changeovers according to schedules.</li><li>Raise work requests or defect notifications for faulty equipment and follow up on rectification.</li><li>Assist in the training and familiarization of new operators.</li><li>Report near misses and implement prescribed risk controls.</li><li>Report deviations related to the Quality, Health, Safety, and Environmental Management System.</li><li>Ensure proper waste disposal measures are followed.</li><li>Perform other assigned duties as required.</li></ul><h3>Qualifications and Experience</h3><ul><li>A minimum of 5 to 10 years of experience in a relevant operational role.</li><li>Demonstrated understanding of plant operations, safety regulations, and emergency procedures.</li></ul><h3>Work Environment</h3><p>This role requires readiness to work in a remote location within Al Qassim, Saudi Arabia.</p><h3>Application Process</h3><p>Interested candidates are encouraged to apply. Salary details will be disclosed during the interview process.</p>

<h3>About the Role</h3><p>Acwa China is seeking a <strong>Control Room Operator</strong> to join their team in Al Qassim. This full-time position involves monitoring and controlling plant operating parameters and coordinating with other operators to ensure smooth plant operations. The role requires 5-10 years of experience in a relevant field.</p><h3>Key Responsibilities</h3><ul><li>Comply with all safety rules and regulations and maintain familiarity with firefighting equipment in the assigned area.</li><li>Understand plant P&amp;IDs, SOPs, work instructions, operation and control logic, and emergency operating procedures.</li><li>Monitor unit parameters, record periodic readings, and summarize shift activities and events in the logbook.</li><li>Follow instructions from the Shift Charge Engineer and Shift Supervisor, coordinating operational activities with other operators.</li><li>Respond promptly and effectively to abnormal operating conditions.</li><li>Coordinate and ensure proper Lock Out &amp; Tag Out (LOTO) procedures during equipment isolation for maintenance, in accordance with approved Permit to Work (PTW) procedures. Normalize equipment as instructed after cancellation.</li><li>Inspect the unit and auxiliaries during shifts to ensure all equipment parameters are within acceptable limits, reporting any abnormalities to the Shift Supervisor or Shift Charge Engineer.</li><li>Perform periodic protection tests under supervision and maintain required records. Execute equipment changeovers according to established schedules.</li><li>Raise work requests or defect notifications for faulty equipment and follow up on rectification.</li><li>Assist in the training and familiarization of new operators.</li><li>Report near misses and implement prescribed risk controls.</li><li>Report deviations related to the Quality, Health, Safety, and Environmental Management System.</li><li>Ensure proper waste disposal measures are followed.</li><li>Perform other assigned duties as required.</li></ul><h3>Qualifications and Experience</h3><ul><li>A minimum of <strong>5 to 10 years of experience</strong> in a control room or plant operations role.</li><li>Demonstrated understanding of plant operations, safety protocols, and emergency procedures.</li><li>Ability to monitor complex systems and respond effectively to operational changes.</li></ul><h3>Work Environment</h3><p>This role requires readiness to work in a remote location within Al Qassim. The position is full-time, and salary details will be discussed during the interview process.</p>

<h3>About the Role</h3><p>Tractebel is seeking a <strong>Senior Site Construction Engineer</strong> to join its team in the Al Qassim Region, Kingdom of Saudi Arabia. This full-time position supports Tractebel's role as the Owner's Engineer for the Al Khushaybi Battery Energy Storage System (BESS) Independent Power Project (IPP). The project involves a 500 MW facility with 4 hours of storage duration (2,000MWh) and is being developed by ENGIE and its consortium partners under the Saudi Power Procurement Company (SPPC) Battery Energy Storage Program.</p><h3>Project Context and Impact</h3><p>As Owner's Engineer, Tractebel provides independent technical oversight and assurance across the project lifecycle. This includes design review, engineering management, technology assessment, construction supervision, testing and commissioning support, and verifying compliance with contractual, regulatory, and international technical standards. This role contributes to the successful delivery of a flagship utility-scale energy storage project in Saudi Arabia, ensuring technical excellence, project quality, safety, reliability, and timely execution. The position supports the integration of large-scale renewable energy into the Kingdom's power system, enhancing grid stability and operational flexibility, and aligning with Saudi Arabia's vision for increased renewable energy penetration.</p><h3>Key Responsibilities</h3><ul><li>Supervise construction works to verify compliance with approved drawings, specifications, and contract requirements.</li><li>Monitor quality, progress, and workmanship, and witness inspections and tests.</li><li>Coordinate all Engineer’s site services and disciplines, and interface with EPC and Client teams.</li><li>Ensure site execution aligns with design intent and applicable standards.</li><li>Identify non-conformities, site risks, and delays, and ensure timely escalation.</li><li>Prepare and submit regular site progress and event reports.</li><li>Maintain accurate site records and support milestone achievement and handover.</li><li>Act as the focal point for all site-related matters from the Owner's Engineer side.</li></ul><h3>Stakeholder Coordination</h3><p>The successful candidate will play a key role in coordinating with the Developer, EPC Contractors, OEMs, Grid Operator, SPPC, and other project stakeholders. This coordination ensures that project objectives are achieved in accordance with schedule, budget, and performance requirements, while adhering to international best practices for utility-scale Battery Energy Storage Systems.</p><h3>Qualifications and Experience</h3><ul><li>A minimum of 5 to 10 years of relevant experience is required for this role.</li></ul><h3>Work Environment</h3><p>This is a full-time position based in Al Qassim, Kingdom of Saudi Arabia, contributing to a significant energy infrastructure project within the region.</p>

<p><strong>1. Job Summary</strong></p><p><strong>Why does this role exist?</strong></p><br><p><em>Tractebel has been appointed as the Owner's Engineer for the Al Khushaybi Battery Energy Storage System (BESS) Independent Power Project (IPP) in the Al Qassim Region, Kingdom of Saudi Arabia. The project is being developed by ENGIE and its consortium partners under the Saudi Power Procurement Company (SPPC) Battery Energy Storage Program. The Al Khushaybi BESS facility has a capacity of 500 MW with 4 hours of storage duration(2,000MWh).</em></p><br><br><p><em>As Owner's Engineer, Tractebel is responsible for providing independent technical oversight and assurance throughout the project lifecycle, including design review, engineering management, technology assessment, construction supervision, testing and commissioning support, and verification of compliance with contractual, regulatory, and international technical standards.</em></p><br><p><em>This role exists to support the successful delivery of one of Saudi Arabia's flagship utility-scale energy storage projects by ensuring technical excellence, project quality, safety, reliability, and timely execution. The position will contribute to the integration of large-scale renewable energy into the Kingdom's power system, enhance grid stability and operational flexibility, and support Saudi Arabia's vision of increasing renewable energy penetration and achieving a more sustainable and resilient electricity network.</em></p><br><p><em>The successful candidate will play a key role in coordinating with the Developer, EPC Contractors, OEMs, Grid Operator, SPPC, and other project stakeholders to ensure that project objectives are achieved in accordance with schedule, budget, and performance requirements while meeting international best practices for utility-scale Battery Energy Storage Systems.</em></p><br><p><strong>2. Responsibilities</strong></p><ul><li><p><em>Supervises construction works to verify compliance with approved drawings, specifications, and contract requirements.</em></p></li><li><p><em>Monitors quality, progress, and workmanship and witnesses inspections and tests.</em></p></li><li><p><em>Coordinates all Engineer’s site services and disciplines and interfaces with EPC and Client teams.</em></p></li><li><p><em>Ensures site execution aligns with design intent and applicable standards.</em></p></li><li><p><em>Identifies non-conformities, site risks, and delays, and ensures timely escalation.</em></p></li><li><p><em>Prepares and submits regular site progress and event reports</em></p></li><li><p><em>Maintains accurate site records and supports milestone achievement and handover.</em></p></li><li><p><em>Act focal point for all site-related matters from OE side</em></p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p><strong>Mandatory</strong></p><ul><li><p><em>Bachelor’s degree in Electrical Engineering</em></p></li><li><p><em>Must Have Substation Experience in KSA with SEC & National Grid</em></p></li></ul><p><strong>Preferred</strong></p><p>☑<em>Relevant professional certification related to the role/discipline</em></p><p>☑<em>Professional membership or accreditation, where applicable</em></p><p>o <em>Software/system/tool certification relevant to the role</em></p><p>☑<em>Must Have Substation Experience in KSA</em></p><p>☑ <em>Experience with BESS integration along with Grid preferable</em></p></li></ul>

<ul><li><p>Managing the integration and validation activities of the Contractor, together with the validation of all Test and Commissioning plans and test procedures for the program.</p></li><li><p>Lead, direct and supervise a team of discipline Engineers in preparation and execution of commissioning of work Location.</p></li><li><p>Assuming entire responsibility for the completion of the implementation in conformance with the client’s needs and project standards.</p></li><li><p>Plan, organize and supervise works to ensure all works performed within the parameters of the project schedule.</p></li><li><p>Liaison with the Systems Engineering team for engineering support and control.</p></li><li><p>Coordinate with the Operator, Civil Defiance, EXPRO and other third parties related to all necessary testing and commissioning requirements for the project.</p></li><li><p>Ensure all testing and commissioning works are comprehensive and discussed with stakeholders to ensure best implementation.</p></li><li><p>Approval of testing and commissioning works.</p></li><li><p>Participate in negotiations with regulatory agencies in public meetings with the client.</p></li><li><p>Initiate risk assessment of testing and commissioning works, review and endorse risk assessment results and recommend course of action to ensure mitigation of risks.</p></li><li><p>Attend to final inspections on completed projects and initiate Contract Completion Certificates and Handover Certificates</p></li><li><p>Coordinates all activities for the successful Commissioning of the project within project schedules and contractual requirements. Oversees all coordination between Client, Contractor, vendors, Engineering, sub-contractors and any other external or internal agency to ensure the smooth Commissioning of the process plant.</p></li><li><p>Review calibration of testing equipment on site.</p></li><li><p>Reviewing the testing and commissioning plans submitted by the Contractor to ensure compliance with the operational requirements of the project.</p></li><li><p>Writing Testing & Commissioning reports and documentation.</p></li><li><p>Ensure completion of training for maintenance and operative staff, O&M manual, spare parts and as-built drawings.</p></li><li><p>Informs themselves of the relevant Quality, Environmental, Safety and Occupational Health Policies, Manuals and Procedures within Hill International and ensures continued compliance with these requirements while employed by Hill.</p></li><li><p>Perform other duties as assigned by the line manager/supervisor.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>A degree in engineering or scientific discipline.</p></li><li><p>Minimum 15 years’ experience in large-scale projects.</p></li><li><p>Knowledge of all phases of construction operations relating to field activities of engineering disciplines, construction technologies and jobsite management.</p></li><li><p>Experience of implementing a zero accident philosophy.</p></li><li><p>Extensive knowledge of health, safety and environmental policies, processes and procedures.</p></li><li><p>Knowledge of the Project Construction Environmental Control Plan.</p></li><li><p>Excellent knowledge of Water and Wastewater works.</p></li></ul>

<p><strong>Position Title: Site Inspector Instrument &amp; Control</strong></p><p><strong>Email Id - recruitment.me@tractebel.engie.com </strong></p><p><strong>While Applying - please mention in subject line - Position and Location as Qassim Region, Saudi Arabia</strong></p><p><strong>1. Job Summary</strong></p><p><strong>Why does this role exist? </strong></p><p><br></p><p><em>Tractebel has been appointed as the Owner's Engineer for the Al Khushaybi Battery Energy Storage System (BESS) Independent Power Project (IPP) in the Al Qassim Region, Kingdom of Saudi Arabia. The project is being developed by ENGIE and its consortium partners under the Saudi Power Procurement Company (SPPC) Battery Energy Storage Program. The Al Khushaybi BESS facility has a capacity of 500 MW with 4 hours of storage duration(2,000MWh).</em></p><p><em> </em></p><p><em> </em></p><p><em>As Owner's Engineer, Tractebel is responsible for providing independent technical oversight and assurance throughout the project lifecycle, including design review, engineering management, technology assessment, construction supervision, testing and commissioning support, and verification of compliance with contractual, regulatory, and international technical standards.</em></p><p><br></p><p><em>This role exists to support the successful delivery of one of Saudi Arabia's flagship utility-scale energy storage projects by ensuring technical excellence, project quality, safety, reliability, and timely execution. The position will contribute to the integration of large-scale renewable energy into the Kingdom's power system, enhance grid stability and operational flexibility, and support Saudi Arabia's vision of increasing renewable energy penetration and achieving a more sustainable and resilient electricity network. </em></p><p><br></p><p><em>The successful candidate will play a key role in coordinating with the Developer, EPC Contractors, OEMs, Grid Operator, SPPC, and other project stakeholders to ensure that project objectives are achieved in accordance with schedule, budget, and performance requirements while meeting international best practices for utility-scale Battery Energy Storage Systems.</em></p><p><br></p><p><br></p><p><br></p><p><strong>2. Responsibilities</strong></p><ul><li><em>Perform inspections and surveillance activities in accordance with approved ITPs </em></li><li><em>Attend and document Hold &amp; Witness points </em></li><li><em>Conduct daily and spot quality inspections on site works </em></li><li><em>Raise observations and NCRs where non-conformities are identified </em></li><li><em>Verify corrective actions before closure </em></li><li><em>Ensure inspection records are uploaded and traceable in Procore </em></li><li><em>Report findings to Site Quality Manager</em></li></ul><p><br></p><p><strong>3. Education</strong></p><p><strong>Mandatory</strong></p><ul><li><em>Bachelor’s degree in Instrumentation &amp; Control Engineering</em></li><li><em>Good to have Substation &amp; BESS related Experience in KSA </em></li></ul><p><strong>Preferred</strong></p><p>☑<em>Relevant professional certification related to the role/discipline</em></p><p>☑<em>Professional membership or accreditation, where applicable</em></p><p>o <em>Software/system/tool certification relevant to the role</em></p><p>☑ <em>Experience with BESS project is preferable</em></p><p><br></p><p><strong>4.Languages:</strong></p><p><strong> </strong></p><p><em>Select the required/preferred languages</em></p><p>☑English </p><p>☑Arabic</p><p><br></p><p><strong>5. Experience and skills</strong></p><p>1. <em>Minimum 6 years of Experience </em></p><p>2. <em>Substation &amp; Utility scale BESS Experience in KSA is preferred</em></p><p>3.<em> Must have Utility Scale BESS experience</em></p>

<h3><strong>About the Role</strong></h3><p>Hill International (KSA) is seeking a <strong>Senior Testing and Commissioning Engineer</strong> for a full-time position in Qassim Province, Al Qassim. This role involves managing and supervising testing and commissioning activities for large-scale projects, ensuring compliance with client needs and project standards.</p><h3><strong>Key Responsibilities</strong></h3><ul><li>Manage the integration and validation activities of the Contractor, including the validation of all Test and Commissioning plans and test procedures for the program.</li><li>Lead, direct, and supervise a team of discipline Engineers in the preparation and execution of commissioning work.</li><li>Assume responsibility for the completion of implementation in conformance with client needs and project standards.</li><li>Plan, organize, and supervise works to ensure all activities are performed within the parameters of the project schedule.</li><li>Liaise with the Systems Engineering team for engineering support and control.</li><li>Coordinate with the Operator, Civil Defense, EXPRO, and other third parties related to all necessary testing and commissioning requirements for the project.</li><li>Ensure all testing and commissioning works are comprehensive and discussed with stakeholders for best implementation.</li><li>Approve testing and commissioning works.</li><li>Participate in negotiations with regulatory agencies in public meetings with the client.</li><li>Initiate risk assessment of testing and commissioning works, review and endorse risk assessment results, and recommend courses of action to ensure mitigation of risks.</li><li>Attend final inspections on completed projects and initiate Contract Completion Certificates and Handover Certificates.</li><li>Coordinate all activities for the successful Commissioning of the project within project schedules and contractual requirements.</li><li>Oversee all coordination between Client, Contractor, vendors, Engineering, sub-contractors, and any other external or internal agency to ensure the smooth Commissioning of the process plant.</li><li>Review calibration of testing equipment on site.</li><li>Review testing and commissioning plans submitted by the Contractor to ensure compliance with the operational requirements of the project.</li><li>Write Testing &amp; Commissioning reports and documentation.</li><li>Ensure completion of training for maintenance and operative staff, O&amp;M manual, spare parts, and as-built drawings.</li><li>Ensure continued compliance with relevant Quality, Environmental, Safety and Occupational Health Policies, Manuals and Procedures within Hill International.</li><li>Perform other duties as assigned by the line manager/supervisor.</li></ul><h3><strong>Qualifications and Experience</strong></h3><ul><li>A minimum of <strong>15 years of experience</strong> in a related field.</li><li>Knowledge of all phases of construction operations relating to field activities of engineering disciplines, construction technologies, and jobsite management.</li><li>Experience in implementing a zero-accident philosophy.</li><li>Extensive knowledge of health, safety, and environmental policies, processes, and procedures.</li><li>Knowledge of the Project Construction Environmental Control Plan.</li><li>Excellent knowledge of Water and Wastewater works.</li></ul><h3><strong>Application Process</strong></h3><p>Candidates who meet the above requirements are encouraged to apply. Salary details will be discussed during the interview process.</p>

<p><strong>Position Title: Site Scheduling Planning Engineer - BESS</strong></p><p><strong>Email Id - recruitment.me@tractebel.engie.com </strong></p><p><strong>While Applying - please mention in subject line - Position and Location as Qassim Region, Saudi Arabia</strong></p><p><strong>1. Job Summary</strong></p><p><strong>Why does this role exist? </strong></p><p><br></p><p><em>Tractebel has been appointed as the Owner's Engineer for the Al Khushaybi Battery Energy Storage System (BESS) Independent Power Project (IPP) in the Al Qassim Region, Kingdom of Saudi Arabia. The project is being developed by ENGIE and its consortium partners under the Saudi Power Procurement Company (SPPC) Battery Energy Storage Program. The Al Khushaybi BESS facility has a capacity of 500 MW with 4 hours of storage duration(2,000MWh).</em></p><p><em> </em></p><p><em> </em></p><p><em>As Owner's Engineer, Tractebel is responsible for providing independent technical oversight and assurance throughout the project lifecycle, including design review, engineering management, technology assessment, construction supervision, testing and commissioning support, and verification of compliance with contractual, regulatory, and international technical standards.</em></p><p><br></p><p><em>This role exists to support the successful delivery of one of Saudi Arabia's flagship utility-scale energy storage projects by ensuring technical excellence, project quality, safety, reliability, and timely execution. The position will contribute to the integration of large-scale renewable energy into the Kingdom's power system, enhance grid stability and operational flexibility, and support Saudi Arabia's vision of increasing renewable energy penetration and achieving a more sustainable and resilient electricity network. </em></p><p><br></p><p><em>The successful candidate will play a key role in coordinating with the Developer, EPC Contractors, OEMs, Grid Operator, SPPC, and other project stakeholders to ensure that project objectives are achieved in accordance with schedule, budget, and performance requirements while meeting international best practices for utility-scale Battery Energy Storage Systems.</em></p><p><br></p><p><br></p><p><br></p><p><strong>2. Responsibilities</strong></p><ul><li><em> Develop and maintain the project schedule ensuring timely progress. </em></li><li><em> Monitor contractor schedule updates and validate reported project progress. </em></li><li><em> Identify critical path activities and highlight potential schedule delays. </em></li><li><em> Prepare weekly and monthly schedule performance reports for Owner. </em></li><li><em> Conduct schedule risk assessments and propose effective mitigation measures. </em></li><li><em> Review contractor recovery plans and evaluate schedule improvement feasibility. </em></li><li><em> Coordinate discipline interfaces to maintain consistent project execution sequencing. </em></li><li><em> Analyze change impacts and support delay claim evaluations. </em></li><li><em> Validate look-ahead schedules ensuring alignment with baseline programme. </em></li><li><em> Track manpower and equipment resources against planned project curves.</em></li></ul><p><br></p><p><br></p><p><strong>3. Education</strong></p><p><strong>Mandatory</strong></p><ul><li><em>Bachelor’s degree &amp; certification in Scheduling &amp; planning</em></li><li><em>Must Have Substation &amp; BESS related Experience in KSA </em></li></ul><p><strong>Preferred</strong></p><p>☑<em>Relevant professional certification related to the role/discipline</em></p><p>☑<em>Professional membership or accreditation, where applicable</em></p><p>o <em>Software/system/tool certification relevant to the role</em></p><p>☑ <em>Experience with BESS project is preferable</em></p><p><br></p><p><strong>4.Languages:</strong></p><p><strong> </strong></p><p><em>Select the required/preferred languages</em></p><p>☑English </p><p>☑Arabic</p><p><br></p><p><strong>5. Experience and skills</strong></p><p><em>List the mandatory years of experience, sector/project exposure, role level and any specific experience required for the position.</em></p><p><br></p><p>1. <em>Minimum 8 years of Experience </em></p><p>2. <em>Substation &amp; Utility scale BESS Experience in KSA is preferred</em></p><p>3.<em> Must have Utility Scale BESS experience</em></p>