oil and gas jobs - Qatif Saudi

<h3 >About the Role</h3> <p >KUWAIT STEEL is seeking an <strong >Operator III- Air Separation Plant</strong> to join their team in Al Qatif. This full-time position involves operating and monitoring air separation plant equipment, ensuring the efficient production of oxygen and nitrogen, and maintaining safety standards. The role requires 0-1 years of experience.</p> <h3 >Key Responsibilities</h3> <ul > <li >Adjust pressure, temperature, flow rates, and purity parameters to support oxygen and nitrogen production.</li> <li >Record daily operating parameters of Air Separation Plant (ASP) and Liquefied Petroleum Gas (LPG) storage and handling equipment.</li> <li >Identify and report any defects or failures during shifts to the Shift In-Charge.</li> <li >Conduct daily checks and note parameters for ASP equipment, including compressors, chilled water equipment, turbines, cold boxes, pumps, and storage facilities, ensuring compliance with safety requirements.</li> <li >Coordinate preventive maintenance with Mechanical Technicians according to servicing plans and oversee jobs during planned downtime and corrective maintenance activities under safety norms.</li> <li >Perform shift activities in the Water Treatment Plant (WTP), including sand filter backwash and water blowdown.</li> <li >Support Root Cause Analysis (RCA) investigations by providing accurate failure observations, field-level feedback, and execution insights.</li> <li >Apply approved preventive actions and updated maintenance tasks resulting from RCA outcomes.</li> <li >Inspect, preserve, and functionally test critical spare parts stored in the warehouse, following defined procedures and schedules.</li> <li >Accurately record maintenance execution data in SAP, including work performed, failure symptoms, parts replaced, and observations.</li> <li >Manage the operation and process tasks of the Air Separation Plant.</li> <li >Adjust oxygen and nitrogen parameters as required by Electric Arc Furnace (EAF) and Ladle Furnace (LF) processes.</li> <li >Monitor technical and safety parameters of LPG storage facilities and handling equipment, including compressors, tanks, boilers, pumps, evaporators, and pressure-reducing stations.</li> <li >Oversee the operation of the ASP, WTP, compressed air plant, and LPG storage system.</li> <li >Assist in coordination with EAF, LF, and caster teams to manage demand and with other departments regarding team requirements.</li> <li >Conduct daily shift activities, addressing operation and maintenance problems, and checking for system leaks in compressors and storage tanks.</li> <li >Handle emergency power failure activities in WTP, CAP, ASP, and LPG storage systems.</li> <li >Record oxygen purity, output, and alarms, and adhere to instructions from Management.</li> <li >Record field readings of ASP, WTP, CAP, and LPG storage systems as per log sheets and report any abnormalities.</li> <li >Implement safety procedures during the unloading of LPG from mobile tankers to storage tanks.</li> <li >Clean equipment, tools, and work areas by removing combustible materials and perform cleaning after maintenance jobs.</li> <li >Execute safe shutdown and startup procedures for the oxygen plant.</li> <li >Handle liquid oxygen and nitrogen safely during tanker unloading.</li> <li >Ensure compliance with safety directives issued by Management.</li> </ul> <h3 >Qualifications and Experience</h3> <ul > <li >0-1 years of relevant experience.</li> <li >Ability to understand and adjust pressure, temperature, flow rates, and purity parameters.</li> <li >Proficiency in recording operating parameters and identifying equipment defects.</li> </ul> <h3 >Required Skills</h3> <ul > <li >Strong attention to detail for recording data and monitoring equipment.</li> <li >Knowledge of safety requirements for air separation plants and LPG handling.</li> <li >Ability to collaborate with mechanical technicians and other departments.</li> <li >Competence in operating and maintaining plant equipment.</li> <li >Basic understanding of SAP for data entry.</li> </ul> <h3 >Work Environment</h3> <p >This is a full-time position based in Al Qatif, involving shift activities and coordination with various operational teams.</p> <h3 >Application Process</h3> <p >Candidates who meet the qualifications are encouraged to apply for this role.</p>

<h3>About the Role</h3><p>HUDSON is seeking a <strong>Cost Control Engineer</strong> to join their team in Saudi Arabia. This full-time position requires strong experience in the Oil &amp; Gas industry, with a preference for candidates who have worked on EPC and/or Shutdown &amp; Turnaround (SD/TA) projects. The role offers a basic salary ranging from 5000 to 7000.</p><h3>Key Responsibilities</h3><ul><li>Applying strong cost control principles within the Oil &amp; Gas, Petrochemical, or Refinery industries.</li><li>Contributing to projects, with a preference for those involving Shutdown &amp; Turnaround activities.</li><li>Utilizing Primavera P6 for project control and cost management tasks.</li><li>Preparing and presenting reports with clear and effective English communication skills.</li></ul><h3>Qualifications and Experience</h3><ul><li>A Bachelor's Degree in Mechanical Engineering or a relevant technical qualification.</li><li>5-10 years of experience, with a strong background in the Oil &amp; Gas, Petrochemical, or Refinery industry.</li><li>Demonstrated hands-on experience with Primavera P6.</li><li>Proficiency in English communication and reporting.</li><li>Prior experience in Saudi Arabia or the GCC region is preferred.</li><li>Experience in Shutdown &amp; Turnaround projects is highly preferred.</li><li>Additional certification in Cost Control, Project Controls, or Quantity Surveying is an advantage.</li></ul><h3>Work Location</h3><p>This position is based in Saudi Arabia, with potential work locations including Dammam, Al Khobar, Dhahran, Al Jubail, Al-Ahsa, Al Qatif, Ras Tannurah, Al Khafji, Buqayq, and Hafar Al Batin.</p><h3>Application Requirements</h3><p>Candidates must possess relevant experience that directly aligns with the requirements of this Cost Control Engineer position.</p>

<h3>About Halliburton</h3><p>Halliburton is one of the world's largest providers of products and services to the global energy industry. The company focuses on attracting and retaining talent by investing in employee development and career growth. This full-time position is based in Al Qatif, Al Khobar, or Al Jubail.</p><h3>Role Overview</h3><p>The Field Service Representative I for MultiChem-TAMHEER assists in maintaining customer relationships and managing chemical injection systems under strict supervision. This role requires knowledge of production systems, flow lines, flow line applications, flow line valves, and pressure dynamics within the oil and gas industry.</p><h3>Key Responsibilities</h3><ul><li>Assist in maintaining customer relationships and setting up chemical injection systems.</li><li>Travel to customer wells to collect samples, install or relocate injection sites, and apply necessary treatments.</li><li>Maintain and service chemical pumps.</li><li>Assist in identifying and pursuing new customers, and participate in presentations as requested.</li></ul><h3>Qualifications and Requirements</h3><ul><li>Minimum high school diploma or GED.</li><li>0-1 years of experience required. Up to 2 years of experience in production chemicals or the oil and gas industry is preferred.</li><li>Possession of a Class A CDL with Hazmat endorsement is preferred.</li><li>Basic computer skills are required.</li><li>Ability to follow all company policies and safety requirements for production chemicals or the oil and gas industry.</li></ul><h3>Compensation</h3><p>Compensation for this position is competitive and commensurate with experience.</p><h3>Application Process</h3><p>Halliburton seeks individuals who are driven to innovate, achieve, grow, and lead within the global energy industry.</p>

<h3><strong>About the Role</strong></h3><p>HUDSON is seeking an experienced Instrument Engineer for a full-time position within a reputable Oil &amp; Gas Company in Saudi Arabia. This role is based in the Eastern Region, with opportunities across cities including Dammam, Al Khobar, Dhahran, Al Jubail, Al-Ahsa, Al Qatif, Ras Tannurah, Al Khafji, and Buqayq. The position requires a professional with 5-10 years of experience in relevant industrial facilities.</p><h3><strong>Key Responsibilities</strong></h3><ul><li>Apply strong experience in Reliability Centered Maintenance (RCM), Failure Mode and Effects Analysis (FMEA/FMECA), and Reliability Engineering principles.</li><li>Demonstrate expertise in Instrumentation, Control Systems, and Safety Instrumented Systems (SIS).</li><li>Work with Distributed Control Systems (DCS), Programmable Logic Controllers (PLC), Control Valves, Field Instrumentation, and Calibration processes.</li><li>Participate in RCM, FMEA, HAZOP, and Root Cause Failure Analysis (RCFA) workshops.</li><li>Develop and validate strategies for Preventive Maintenance (PM), Predictive Maintenance (PdM), Condition-Based Monitoring (CBM), Proof Testing, and Calibration.</li></ul><h3><strong>Required Qualifications and Experience</strong></h3><ul><li>A minimum of 8+ years of experience as an Instrument Engineer.</li><li>Proven experience in Oil &amp; Gas, Refinery, Petrochemical, Power, or other Industrial facilities.</li><li>Knowledge of IEC 61511, ISA Standards, Safety Integrity Level (SIL) Studies, and Functional Safety.</li><li>Familiarity with SAP PM is preferred.</li></ul><h3><strong>Compensation</strong></h3><p>The salary for this position ranges from SAR 8,000 to SAR 10,000 per month, commensurate with experience and qualifications.</p><h3><strong>Application Process</strong></h3><p>Interested candidates are invited to apply for this Instrument Engineer position with HUDSON. This is a full-time opportunity to contribute to a leading organization in the Oil &amp; Gas sector.</p>

<h3><strong>About Halliburton</strong></h3><p>Halliburton is one of the world's largest providers of products and services to the global energy industry. The company is committed to attracting and retaining talent by investing in employee development. Halliburton is an Equal Opportunity Employer, making employment decisions without regard to various protected statuses.</p><h3><strong>Role Overview</strong></h3><p>Halliburton is seeking an <strong>ESG Coordinator, HSE (A452-ESG-Coord, HSE)</strong> for a full-time position in Saudi Arabia, with locations including Al Qatif, Al Jubail, and Al Khobar. This role requires 2-5 years of experience and focuses on the implementation of health, safety, and environmental policies under the direct supervision of Operations leadership. Compensation for this position is competitive and commensurate with experience.</p><h3><strong>Key Responsibilities</strong></h3><ul><li>Implement health, safety, and environmental policies, procedures, and guidelines as instructed.</li><li>Conduct activities related to hazard identification, risk management, incident reporting, investigation, and causal analysis.</li><li>Manage waste minimization, pollution prevention and control, and emergency response.</li><li>Ensure compliance activities across all areas of HSE.</li><li>Oversee the integrated management system (HMS) to meet company needs and industry standards.</li><li>Participate in and conduct internal, regulatory, and customer audits and inspections.</li><li>Perform record-keeping and other general administrative duties.</li><li>Provide technical advice, data interpretation, training, and process improvement.</li></ul><h3><strong>Qualifications and Experience</strong></h3><ul><li>Undergraduate Degree in an HSE-related field, Science, or Engineering.</li><li>Three years of experience in the Oil &amp; Gas or Manufacturing industry.</li><li>A total of 2-5 years of professional experience is required for this role.</li></ul><h3><strong>Work Environment</strong></h3><p>This full-time position will involve duties within a defined project, work site, or geographic location, primarily in Al Qatif, Al Jubail, and Al Khobar, Saudi Arabia.</p><h3><strong>Career Development</strong></h3><p>Halliburton is committed to investing in its employees, offering opportunities for growth and career development within one of the world's largest energy industry service providers.</p>

<h3><strong>About the Role</strong></h3><p>Schlumberger is seeking a <strong>PS Technical Sales Support Engineer</strong> to join their team in Al Qatif. This full-time role focuses on driving aftermarket, spare parts, and brownfield business development across Saudi Arabia and Bahrain. The position requires 0-1 years of experience and involves working with GOSP, oil &amp; gas, refineries, petrochemical, and seawater facilities.</p><h3><strong>Role Context and Objectives</strong></h3><p>The Technical Sales Support Engineer will leverage Schlumberger's legacy Cameron installed base to establish and expand relationships within facilities. The primary objective is to understand customer operational challenges and convert identified needs into opportunities across the broad Process Technologies &amp; Solutions (PTS) lifecycle-services portfolio. This involves strategic engagement to enhance equipment reliability and lifecycle value.</p><h3><strong>Key Responsibilities</strong></h3><ul><li>Own and develop the legacy Cameron installed base, identifying opportunities for aftermarket services, upgrades, replacements, and general lifecycle support.</li><li>Drive the spare-parts business for the Geounit, ensuring customers maintain appropriate and up-to-date spare-parts inventories.</li><li>Review installed equipment and customer spare-parts requirements, identifying obsolete, discontinued, or at-risk components.</li><li>Proactively implement SLB spares obsolescence and replacement programs.</li><li>Develop installed-base strategies aimed at increasing equipment reliability, availability, and overall lifecycle value.</li></ul><h3><strong>Required Skills and Engagement</strong></h3><ul><li>Establish a strong professional network across Operations, Maintenance, Engineering, Reliability, Procurement, and Projects departments.</li><li>Understand facility procurement routes, key decision-makers, specifications, approved-vendor requirements, and purchasing processes.</li><li>Conduct regular facility visits to gain insights into operations, troubleshoot issues, and identify customer pain points.</li><li>Utilize the installed base as a strategic entry point to expand Schlumberger's relationships within client facilities.</li></ul><h3><strong>Experience and Work Type</strong></h3><p>This position is a <strong>full-time</strong> role requiring 5+ years of relevant experience. The work involves direct engagement with clients and facilities, emphasizing technical sales support and business development within the specified industries.</p><h3><strong>Location</strong></h3><p>The role is based in <strong>Al Qatif</strong>, Saudi Arabia, with responsibilities extending across Saudi Arabia and Bahrain.</p>

<h3>About the Role</h3><p>INTECH is seeking a <strong>Control System Engineer</strong> to join its team in Al Qatif. This full-time role involves delivering advanced industrial automation and control solutions across various industries, including Oil &amp; Gas, Petrochemicals, Utilities, and Manufacturing. The position requires 0-1 years of experience.</p><h3>Role Overview</h3><p>The Control System Engineer will contribute to automation projects involving PLC, SCADA, DCS, SIS, FGS, OSI PI Systems, and Wellhead Automation solutions. This role spans the entire project lifecycle, from engineering and design to commissioning, troubleshooting, startup, and final handover. INTECH specializes in vendor-neutral, customized control, safety, and automation systems designed to enhance operational efficiency, reliability, and performance.</p><h3>Key Responsibilities</h3><ul><li>Execute and supervise site activities, including installation, commissioning, startup, testing, troubleshooting, and maintenance support for industrial automation systems.</li><li>Conduct site surveys and prepare technical assessments based on project requirements.</li><li>Perform preventive and corrective maintenance for PLC/SCADA-based systems.</li><li>Provide on-site and remote technical support to customers and stakeholders.</li><li>Attend emergency and on-call troubleshooting activities at customer sites.</li><li>Carry out commissioning and startup activities for N2 and Air Dryer Packages.</li><li>Support OSI PI System integration and related activities.</li><li>Coordinate with customers, subcontractors, vendors, and internal teams during project execution.</li><li>Maintain service documentation, including timesheets, service reports, FAT/SAT reports, and technical records.</li><li>Participate in control system engineering activities, including specification development, PLC/SCADA code implementation, testing, and commissioning.</li><li>Perform hardware design and implementation for specialized control systems, including DCS, SIS, and FGS.</li><li>Carry out system staging, internal testing, and Factory Acceptance Testing (FAT).</li><li>Interpret customer specifications, including FRS, P&amp;IDs, Cause &amp; Effect diagrams, narratives, philosophies, and technical drawings.</li><li>Lead project execution activities from Kick-Off Meeting (KOM) to commissioning and final handover.</li><li>Monitor project schedules, technical deliverables, and site progress to ensure successful project completion.</li><li>Support technical clarification meetings with customers and vendors.</li><li>Assist in technical decision-making, risk identification, and issue resolution during project execution.</li><li>Collaborate with technical writing teams to develop and improve project and service documentation.</li><li>Identify process improvement opportunities to enhance system reliability and operational efficiency.</li><li>Conduct training sessions for customers and internal teams on automation systems operation and maintenance.</li><li>Mentor and support junior and local Control &amp; Instrumentation engineers.</li><li>Promote safe working practices and ensure compliance with company HSE requirements.</li></ul><h3>Experience and Qualifications</h3><p>Candidates should possess 0-1 years of experience in a relevant field. Specific qualifications were not provided, but a background in control systems engineering is expected.</p><h3>Work Environment</h3><p>This is a full-time position based in Al Qatif. The role involves working within a team that delivers industrial automation and control solutions across various sectors.</p><h3>Application Process</h3><p>Further details regarding the application process and salary will be discussed during the interview stage.</p>

<h3>About Flowserve</h3><p>Flowserve is a global manufacturer specializing in pumps, valves, seals, and aftermarket services. The company delivers comprehensive flow control solutions that support essential industries such as energy, clean water, and pharmaceuticals. Flowserve fosters a culture built on ingenuity, innovation, and excellence, offering opportunities for professional growth and competitive rewards, grounded in core values: People, Safety, Integrity, Ownership, and Ingenuity.</p><h3>Role Overview</h3><p>The Field Service Technician-3 is responsible for the installation, commissioning, monitoring, troubleshooting, and repair of Flowserve’s pumps, seals, and other equipment. This full-time position is based in Al Qatif and involves providing real-time technical support to customers across various industries, including oil and gas, chemical, nuclear, coal, and wastewater. The technician will offer recommendations for repairs, upgrades, and replacement equipment, actively engaging in onsite problem-solving and solution implementation at customer facilities.</p><h3>Key Responsibilities</h3><ul><li>Conduct direct, in-person service calls in response to customer requests.</li><li>Assess mechanical problems and implement prompt resolutions.</li><li>Collaborate with customer personnel and lead work crews as required.</li><li>Oversee the complete repair cycle: disassembly, cleaning, inspection, repair, and assembly.</li><li>Ensure successful and timely equipment installation.</li><li>Perform pre-startup equipment checks and assess startup performance.</li><li>Monitor the maintenance and performance of Flowserve equipment.</li><li>Train customers on proper operating and maintenance procedures for Flowserve products.</li><li>Collaborate with Flowserve’s supporting organizations, including repair centers, customer service, and sales engineering.</li><li>Maintain and submit organized, accurate records, including daily reports, jobs quoted, jobs performed, and time and materials charged.</li><li>Uphold Flowserve’s values for ethics, safety, and quality through actions and communication.</li></ul><h3>Qualifications and Requirements</h3><ul><li>Professional certifications in this field.</li><li>High School Diploma / GED with 5-7 years of relevant experience.</li><li>Proficiency in the industrial applications and operations of pumps, valves, seals, actuators, and mechanical equipment.</li><li>Experience with installing mechanical equipment.</li><li>Experience in repairing pump equipment, installing mechanical seals, and changing seal faces/gaskets/O-rings.</li><li>Proven ability to accurately read and interpret blueprints, engineering drawings, and schematics.</li><li>Proficiency in Outlook, Word, and Excel.</li><li>An active driver’s license with a good driving record.</li></ul><h3>Required Skills and Attributes</h3><ul><li>Ability to work collaboratively with diverse teams.</li><li>Self-starter with strong follow-through, capable of independent work with minimal supervision.</li><li>Excellent communication and organizational skills.</li><li>Ability to travel, including globally, for extended periods.</li><li>Flexibility to work overtime as required to minimize customer impact.</li></ul><h3>Physical Demands</h3><p>This role requires physical activity, including frequent lifting of up to 50 pounds (25kg), ascending/descending ladders and staircases, and climbing and reaching in, under, and around large equipment, often outdoors year-round. For positions requiring customer site access, candidates may need to complete a medical Fit for Duty evaluation to verify physical and medical capability to perform essential duties safely and effectively, with or without reasonable accommodation.</p>

<h3>About Halliburton</h3><p>Halliburton is one of the world’s largest providers of products and services to the global energy industry. The company is committed to attracting and retaining talent by investing in employees and empowering their professional development. Halliburton is an Equal Opportunity Employer, making employment decisions without regard to various protected statuses.</p><h3>Role Overview: Service Well Testing - Data Acquisition</h3><p>Halliburton is seeking a Service Well Testing - Data Acquisition professional to join its team in Al Qatif and Al Khobar. This full-time role involves performing all phases of rigging operations for service line equipment on both onshore and offshore work locations. The position requires 5-10 years of relevant experience.</p><h3>Key Responsibilities</h3><ul><li>Perform all phases of rigging up and down service line equipment at work locations, both onshore and offshore.</li><li>Provide necessary planning for jobs, including equipment setup, well site direction, and customer support activities.</li><li>Manage activities related to maintaining, setting up, testing, and operating equipment at customer locations and field camps.</li><li>Mentor and train lower-level Service Operators and Operator Assistants in areas of expertise.</li><li>Monitor instruments and conduct required calculations to ensure data quality at the well site.</li><li>Consult with customers regarding services and products, foster positive customer relations at the well site, and ensure customer satisfaction.</li><li>Verify equipment according to job plans, maintain equipment properly, and complete all job documentation.</li><li>Conduct pre-job toolbox safety meetings, review and verify job plans with customer representatives, and manage any required changes.</li></ul><h3>Qualifications and Requirements</h3><ul><li>Completion of a high school diploma.</li><li>A minimum of 6 years of experience in oil field drilling activities.</li><li>At least 4 years of experience specifically in underbalanced drilling and/or managed pressure drilling.</li><li>Ability to perform basic mathematical calculations.</li><li>Basic reading comprehension and writing skills.</li></ul><h3>Compensation</h3><p>Compensation for this position is competitive and will be commensurate with experience.</p>

<h3>About Halliburton</h3><p>Halliburton is one of the world’s largest providers of products and services to the global energy industry. The company is committed to attracting and retaining top talent by investing in employee development and career growth. Halliburton is an Equal Opportunity Employer, making employment decisions without regard to various protected statuses.</p><h3>Role Overview: UBD Well Site Service Leader</h3><p>Halliburton is seeking a <strong>UBD Well site service leader</strong> to join its team in Al Qatif and Al Khobar. This full-time role involves coordinating and overseeing GeoBalance Applications operations at both well sites and base camps. The position emphasizes personnel development, operational excellence, and ensuring customer satisfaction.</p><h3>Key Responsibilities</h3><ul><li>Coordinate and oversee GeoBalance Applications operations at the well site and base camp under broad direction.</li><li>Provide necessary planning for jobs, including personnel allocation, equipment setup, well site direction, and customer support.</li><li>Communicate with other Product Service Line (PSL) leaders and third parties to ensure tool and well site activity capability.</li><li>Mentor and train junior personnel in areas of expertise.</li><li>Interact with customers and supervise service completion activities and/or shop personnel to exceed customer requirements.</li><li>Contact customers for performance follow-up and to plan future work.</li></ul><h3>Qualifications and Experience</h3><ul><li>Completion of a high school diploma.</li><li>A minimum of <strong>9 years of experience</strong> in oil field drilling activities.</li><li>At least <strong>6 years of experience</strong> specifically in underbalanced drilling and/or managed pressure drilling.</li></ul><h3>Required Skills</h3><ul><li>Excellent leadership skills.</li><li>Strong communication skills.</li></ul><h3>Compensation</h3><p>Compensation for this position is competitive and will be commensurate with the candidate's experience and qualifications.</p>

<h3>About the Role</h3><p>Halliburton is seeking a <strong>Service Specialist III</strong> to join its team in Al Qatif, Al Khobar, or Al Jubail. This full-time role is for experienced professionals who are prepared to manage and execute service line operations for the global energy industry, both onshore and offshore.</p><h3>Role Overview</h3><p>The Service Specialist III supervises and performs all phases of equipment rigging and operation at work locations. This position involves critical planning, direct well site management, and ensuring customer satisfaction through effective service delivery and communication. The role also includes mentoring junior staff and maintaining equipment standards.</p><h3>Key Responsibilities</h3><ul><li>Supervise, direct, and execute all phases of rigging up and down service line equipment at work locations, both onshore and offshore.</li><li>Provide necessary planning for jobs, including equipment setup, well site direction, and customer support activities.</li><li>Manage activities related to maintaining, setting up, testing, and operating equipment at customer locations and field camps.</li><li>Mentor and train lower-level Service Operators and Operator Assistants in areas of expertise.</li><li>Monitor instruments and perform calculations to ensure data quality at the well site.</li><li>Consult with customers regarding services and products, foster positive customer relations at the well site, and ensure customer satisfaction.</li><li>Properly maintain equipment and complete all required job documentation.</li><li>Conduct pre-job toolbox safety meetings, review and verify job plans with customer representatives, and manage any required changes.</li><li>Review information from Business Development to confirm adherence to best practices and ensure proposed job plans meet customer expectations efficiently.</li><li>Communicate with other Product Service Lines (PSLs) and third parties to ensure tool and well site activity compatibility.</li></ul><h3>Qualifications and Requirements</h3><ul><li>High school diploma.</li><li>A minimum of <strong>9+ years of experience</strong> in oil field drilling activities.</li><li>At least <strong>5+ years of experience</strong> specifically in underbalanced drilling and/or managed pressure drilling.</li><li>Strong mathematical acumen.</li><li>Proficient reading comprehension and writing skills.</li></ul><h3>Compensation</h3><p>Compensation for this position is competitive and will be commensurate with experience.</p><h3>About Halliburton</h3><p>Halliburton is one of the world’s largest providers of products and services to the global energy industry. The company focuses on attracting and retaining talent by investing in employee development and career growth.</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><span>Airbus is committed to providing reasonable accommodations as an Equal Opportunity Employer to applicants with disabilities. If you require assistance or an accommodation to complete your application, please contact us at USCareers@airbus.com</span></p><br><br><br><ul><li>Notice: Know Your Rights: Workplace Discrimination is Illegal</li><li>Notice: Pay Transparency Nondiscrimination (English)</li><li>Aviso: Transparencia en el Pago No Discriminación&nbsp;(Spanish)</li></ul><br><br><p><span><b><b>Job Description:</b></b></span></p><br><br><p><span>Airbus is looking for a Flight Line Mechanic to join our Mobile Manufacturing Team. This position will be responsible for performing Functional Test Procedure (FTP), Pre &amp; Post Flight inspection, preparing built aircraft for test flight and delivery readiness. This includes operating, testing, troubleshooting, repairing and inspecting aircraft systems using approved aircraft data. Proficiently operate and understand a wide</span></p><br><br><p><b><span>​</span></b></p><br><br><p><b><b>Meet the Team:</b></b></p><br><br><p><span>The team at the Airbus U.S. Manufacturing facilities help assemble the finest aircraft in the world, along two (soon to be three) production lines for the A220 and A320 Family aircraft. On the shop floor you’ll be surrounded by individuals who are passionate about aviation and skilled in areas like electrical, structure and quality. Join our team and help build the next generation of aircraft.</span></p><br><br><br><p><b><b>Your Working Environment:</b></b></p><br><br><p><span>On ‘Airbus Way’ you will find the Airbus U.S. Manufacturing Facility for commercial aircraft. Opened at the Mobile Aeroplex at Brookley in 2015, the facility produces A320 Family aircraft and added a second product line for the A220 in 2019. The facility, which strengthens the U.S. aerospace industry, is part of Airbus’ strategy to enhance its global competitiveness by meeting the growing needs of its customers in the United States and beyond.</span></p><br><br><br><p><b><b>How We Care for You:</b></b></p><br><br><ul><li><p><span>Financial Rewards: Competitive base salary, incentive compensation which may include profit sharing schemes, retirement savings plan and the ability to participate in an Employee Stock Ownership Plan (“ESOP”)</span></p><br><br></li><li><p><span>Work/Life Balance: Paid time off including personal time, holidays and a generous paid parental leave program.</span></p><br><br></li><li><p><span>Health &amp; Welfare: Comprehensive insurance coverage including medical (traditional and high-deductible health plans), prescription, dental, vision, life, disability, Employee Assistance Plan (“EAP”) and other supplemental benefit coverages.&nbsp;</span></p><br><br></li><li><p><span>Individual Development: Upskilling and development opportunities through our global Leadership University, including unlimited access to 10,000+ e-learning courses focusing on ways to develop your employability, certifications, career path as well as the opportunity to participate in accelerated development programs and both national and international mobility.</span></p><br><br></li></ul><br><p><b><b>Your Challenges:</b></b></p><br><br><p><span>Perform aircraft system Final Test Procedure Test (FTP) / Pre /Post flight check list/ Daily Inspection (DI) prepare built aircraft for test flight readiness</span><br><span>Ability to learn new tasks and techniques in trouble shoot aircraft systems and support Flight line operation at Airbus FAL Mobile Flight line Organization.</span><br><span>Troubleshoots malfunctions, rigs, repairs, replacement aircraft structures, components and aircraft systems of moderate difficulty, maintains and rework aircraft components including but not limited to landing gear, flight surfaces and controls, anti-icing, engines, hydraulics, pneumatics, fuel systems, ventilation, heating and cooling systems and mechanical / Cabin interior components Servicing, repair and prepare documentation in according with company procedure and specifications. Perform Post dock maintenance daily check list/ Safety and security /Incoming inspection. Perform day to day planned and unplanned aircraft maintenance family. Participate actively in the development and improvement of family system trouble shoot skills. Prior experience as Refuel/Defuel, Aircraft Jack and Tow. Experience performing other miscellaneous aircraft services to include but not limited to: Hydraulic and Engine Oil, service aircraft tire/struts and must be familiar with handling Hazard material policy.</span></p><br><br><p><br><span>Basic knowledge of electrical/Mechanical theory and thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, and dial indicators, micrometers and powered/non-powered support equipment.</span><br><span>Performs a variety of operations in preparing, sealing and testing, using a thorough knowledge of all aircraft sealing techniques, various sealant characteristics such as storage, application, tack-free and cure times.</span><br><span>Capable of reading and interpreting approved aircraft diagrams, charts, schematics and maintenance procedures: FTP/WO/AMM/IPC/AWD/SB/ CMM. Participate to process improvement, root cause analysis, 5S, and all applicable tools for improving work load, quality, safety and reducing cycle time.</span><br><span>Participate in team daily SQCDP project and daily tool / FOD management</span><br><span>Ability to perform work in the confined space area, height condition and outdoor environment condition. Must be able to support and train other aircraft technicians with technical knowledge and skills. Maintain close working relationship with assigned lead person with regard to schedules, priorities, availability of parts, supplies and tools, and special instructions as required. Use a variety of standard and specialized hand tools, power equipment, measuring devices and test equipment in completing work assignments, and jigs/Fixtures with associated license, such as but not limited to:</span></p><br><br><ul><li><p><span>Crane</span></p><br><br></li><li><p><span>Cherry-picker</span></p><br><br></li><li><p><span>Fork lift</span></p><br><br></li><li><p><span>Lifting platform</span></p><br><br></li><li><p><span>Loading platform</span></p><br><br></li></ul><br><p><b><b>Your Boarding Pass:</b></b></p><br><br><ul><li><p><span>3 years minimum aviation experience, preferably in an aviation manufacturing or MRO environment</span></p><br><br></li><li><p><span>Valid Airframe and Powerplant License</span></p><br><br></li></ul><br><br><br><p>This job requires an awareness of any potential compliance risks and a commitment to act with integrity, as the foundation for the Company’s success, reputation and sustainable growth.</p><br><br><br><p><span><b><b><b><b>Company:</b></b></b></b></span></p><br><br>Airbus Americas, Inc.<br><p><b>Employment Type:</b></p><br><br>US - Direct Hire<br><p><b>Experience Level:</b></p><br><br>Professional<br><p><b>Remote Type:</b></p><br><br>On-site<br><p><b>Job Family:</b></p><br><br>Flight line &lt;JF-MA-FL&gt;<p>------</p><br><br><p>------</p><br><br>Airbus provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetics, pregnancy, marital status, veteran status or other legally protected status. In addition to federal law requirements, Airbus complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, demotion, termination, layoff, recall, transfer, leaves of absence, compensation, benefits and training. Airbus expressly prohibits any form of workplace harassment based on race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetics, pregnancy, marital status, veteran status or other legally protected status. As a matter of policy, Airbus does not sponsor visas for US positions unless specified. Only applicants with current work authorization will be considered. Airbus does not offer tenured or guaranteed employment. Employment with Airbus is at will, meaning either the company or the employee can terminate the employment relationship at any time, with or without cause, with or without notice. Airbus reserves the right to revise or change job duties and responsibilities as the need arises. This position description does not constitute a written or implied contract of employment.<br><p>By submitting your CV or application you are consenting to Airbus using and storing information about you for monitoring purposes relating to your application or future employment. This information will only be used by Airbus.<br>Airbus is committed to achieving workforce diversity and creating an inclusive working environment. We welcome all applications irrespective of social and cultural background, age, gender, disability, sexual orientation or religious belief.</p><br><br><p><span>Airbus is, and always has been, committed to equal opportunities for all. As such, we will never ask for any type of monetary exchange in the frame of a recruitment process. Any impersonation of Airbus to do so should be reported to&nbsp;</span><span>emsom@airbus.com.</span></p><br><br><br> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> No experience required </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

<h3>About the Role</h3><p>Halliburton is seeking an experienced Field Professional for Cased Hole Wireline Technologies. This <strong>full-time</strong> position is based in <strong>Al Qatif or Al Khobar</strong> and requires 2-5 years of relevant experience. The role involves providing essential services and operating tools for customers at well sites, applying specialized knowledge in the global energy industry.</p><h3>Responsibilities</h3><ul><li>Independently provide basic services and tool operation to customers at the well site, applying knowledge of Halliburton Cased Hole Wireline Technologies under general supervision.</li><li>Apply engineering, mechanical, and geological principles to articulate basic data interpretations and mechanical constructs to clients using proprietary software.</li><li>Learn to coach clients through various drilling and completion scenarios.</li><li>Actively participate in the training and development of operators and Associate Field Professionals on all aspects of job execution.</li></ul><h3>Qualifications and Requirements</h3><ul><li>A minimum of <strong>2-5 years of experience</strong> in a related field.</li><li>Demonstrated ability to apply knowledge of Cased Hole Wireline Technologies.</li><li>Proficiency in applying engineering, mechanical, and geological principles.</li><li>Experience with proprietary software for data interpretation and mechanical constructs is preferred.</li></ul><h3>Compensation</h3><p>Compensation for this role is competitive and will be commensurate with experience.</p><h3>About Halliburton</h3><p>Halliburton is one of the world’s largest providers of products and services to the global energy industry. The company is committed to attracting and retaining talent by investing in employees and empowering their professional development. Halliburton is an Equal Opportunity Employer, making employment decisions without regard to race, color, religion, disability, genetic information, pregnancy, citizenship, marital status, sex/gender, sexual preference/orientation, gender identity, age, veteran status, national origin, or any other status protected by law or regulation.</p>