oil and gas jobs - Tabuk Saudi

<ul><li><p>Coordinate system-based commissioning plans, vendor schedules, test scripts, site access, work permits, testing windows, and interfaces with Security, DT/OT, Construction, Quality, EHS, and Operations.</p></li><li><p>Review commissioning procedures, method statements, ITPs, FAT and SAT records, integrated-test plans, cause-and-effect requirements, network dependencies, and acceptance criteria.</p></li><li><p>Witness and document functional, interface, failover, alarm, communication, recording, access-control, and integrated security tests performed by approved specialists.</p></li><li><p>Verify readiness of field devices, control-room workstations, servers, storage, networks, power supplies, cybersecurity controls, licenses, time synchronization, and system integrations before testing.</p></li><li><p>Maintain completion status, test records, defect logs, punch lists, redlines, as-built evidence, training records, asset information, and handover dossiers.</p></li><li><p>Drive closure of defects, NCRs, vendor actions, integration issues, cybersecurity approvals, and HCIS/SAIS evidence gaps, verifying objective evidence before acceptance.</p></li><li><p>Coordinate operations training, competency transfer, operating procedures, maintenance plans, spares, licenses, warranties, service contracts, and control-room readiness.</p></li><li><p>Support temporary security measures and risk-based operating arrangements while permanent systems or authority-dependent items remain incomplete.</p></li><li><p>Assist security operations during early operations by coordinating system stabilization, alarm rationalization, defect response, vendor support, and performance monitoring.</p></li><li><p>Escalate schedule, compliance, integration, resource, and operational-readiness risks early with clear decision needs and recovery actions.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Experience on an industrial, energy, oil and gas, infrastructure, hydrogen, ammonia, or other high-security mega-project.</p></li></ul>

<p><strong>We're Hiring | Draftsman – Electrical &amp; ELV</strong></p><p><br></p><p><strong>Lantern Systems Co. Ltd.</strong></p><p><br></p><p>We are looking for an experienced <strong>Draftsman – Electrical &amp; ELV</strong> to join our team.</p><p><br></p><p><strong>Job Purpose</strong></p><p>The Draftsman is responsible for preparing, updating, and maintaining engineering drawings and CAD models for Electrical, Telecommunications, ELV, and Security Systems in accordance with project specifications, client requirements, international standards, and company drafting procedures.</p><p>The role supports design development, construction documentation, IFC/As-Built drawing preparation, and document control activities throughout the project lifecycle.</p><p>Key Responsibilities</p><p><strong>1. Drawing &amp; Documentation Control</strong></p><p>Prepare the following drawings:</p><ul><li>Concept Drawings</li><li>IFR (Issued for Review) Drawings</li><li>IFI (Issued for Information) Drawings</li><li>IFC (Issued for Construction) Drawings</li><li>As-Built Drawings</li><li>Shop Drawings</li><li>Detailed Installation Drawings</li></ul><p>Additional responsibilities:</p><ul><li>Maintain drawing registers and revision history.</li><li>Ensure all drawings comply with project CAD standards, drafting procedures, and document numbering systems.</li><li>Support preparation of engineering deliverables for Aconex, client submissions, and consultant reviews.</li></ul><p><strong>2. Coordination &amp; Site Support</strong></p><ul><li>Coordinate with engineers, construction teams, subcontractors, and vendors for drawing development.</li><li>Review site conditions and update drawings based on red-line markups.</li><li>Support technical queries and drawing clarifications during construction.</li></ul><p>Required Qualifications</p><p><strong>Education</strong></p><ul><li>Diploma or Bachelor’s Degree in Drafting or a related field.</li></ul><p><strong>Experience &amp; Technical Requirements</strong></p><ul><li>Minimum <strong>3–5 years</strong> of drafting experience in Electrical, Telecom, ELV, or Security System projects.</li><li>Experience in EPC, industrial, infrastructure, oil &amp; gas, utility, or HCIS security projects is preferred.</li><li>Ability to interpret engineering specifications, vendor drawings, and design calculations.</li><li>Knowledge of electrical and ELV drafting standards.</li></ul><p><br></p>

<p><strong><br><br>Job Description</strong></p><p><strong>Position Summary</strong></p><p>We are seeking an experienced <strong>Process Safety Engineer</strong> to provide site leadership for Process Safety Engineering during the commissioning, start-up, transition and early operational phases of the NEOM Green Hydrogen Project.</p><p>The role will provide a strong link between engineering design, field modifications, commissioning, operations and safety-management systems. The successful candidate will lead the practical implementation of process-safety requirements at site, ensuring that hazards and changes are appropriately assessed, actions are driven to closure, and process-safety requirements are embedded before systems transition into operation.</p><p>The position is particularly important as the project moves toward hazardous inventories and operating conditions where robust process-safety management and emergency readiness become critical.</p><p><strong>Key Responsibilities</strong></p><p><strong>Process Safety Management</strong></p><ul><li><p>Lead site implementation and ongoing development of the project's Process Safety Management requirements, including support for OSHA PSM / 29 CFR 1910.119 , training, eMOC administration, and management of threshold hazardous chemical inventory requirements.</p></li><li><p>Support Operational readiness inspections, Field change notes reviews, and Emergency Management Plan activities.</p></li><li><p>Coordinate Process Safety Information, operating readiness and management-system requirements associated with hazardous materials.</p></li><li><p>Support training and competency development for engineering, commissioning and operations personnel.</p></li><li><p>Coordinate Design Near Miss initiatives and ensure timely follow-up and closure of associated actions.</p></li></ul><ul><li><p>Ensure HCIS Safety and Fire protection compliance across the project sites.</p></li><li><p>Review field changes and modifications for potential Process Safety consequences before implementation.</p></li><li><p>Ensure changes are reflected in applicable hazard assessments and Process Safety Information.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><p><strong>Qualifications</strong></p><ul><li><p>Bachelor's degree in <strong>Chemical Engineering, Process Engineering</strong> or a closely related engineering discipline.</p></li><li><p>Minimum of 10 years of experience in Industry</p></li><li><p>Strong professional experience in Process Safety within major process, chemical, energy, hydrogen, ammonia, oil & gas or petrochemical facilities.</p></li><li><p>Demonstrable experience working on major-project commissioning, start-up and/or operating facilities.</p></li><li><p>Practical experience of Process Hazard Analysis and process-safety risk assessment.</p></li><li><p>Working knowledge of Process Safety Management frameworks and hazardous-process facilities.</p></li><li><p>Ability to work effectively across engineering, construction, commissioning, operations and safety organizations.</p></li></ul><br><p><strong>Preferred Experience</strong></p><ul><li><p>Hands-on experience facilitating <strong>HAZOP and LOPA</strong> workshops.</p></li><li><p>Experience with Management of Change and field-change risk assessment.</p></li><li><p>Experience supporting commissioning and operational-readiness programmes.</p></li><li><p>Experience with hydrogen, ammonia or other highly hazardous chemical facilities would be highly valuable.</p></li><li><p>Previous Middle East or Saudi Arabia major-project/site experience would be advantageous.</p></li><li><p>Experience taking process-safety recommendations from identification through practical field implementation and verified closure.</p></li></ul>

At Air Products, we reimagine what’s possible. By tapping into the motivation of our people and our collective experience, we create the ideas and innovations that drive us forward. When we come together – where every voice is heard and everyone knows they belong and matter – we create solutions that launch people into space, support lifesaving care in hospitals, and enable the construction of groundbreaking, world scale production facilities.<br><br><strong>Reimagine What’s Possible <br><br></strong><strong>Job Description<br><br></strong><strong>Position Summary<br><br></strong>We are seeking an experienced <strong>Process Safety Lead</strong> to provide site leadership for Process Safety Engineering during the commissioning, start-up, transition and early operational phases of the NEOM Green Hydrogen Project.<br><br>The role will provide a strong link between engineering design, field modifications, commissioning, operations and safety-management systems. The successful candidate will lead the practical implementation of process-safety requirements at site, ensuring that hazards and changes are appropriately assessed, actions are driven to closure, and process-safety requirements are embedded before systems transition into operation.<br><br>The position is particularly important as the project moves toward hazardous inventories and operating conditions where robust process-safety management and emergency readiness become critical.<br><br><strong>Key Responsibilities<br><br></strong><strong>Process Safety Management<br><br></strong><ul><li>Lead site implementation and ongoing development of the project's Process Safety Management requirements, including support for OSHA PSM / 29 CFR 1910.119 , training, eMOC administration, and management of threshold hazardous chemical inventory requirements.</li><li>Support Operational readiness inspections, Field change notes reviews, and Emergency Management Plan activities.</li><li>Coordinate Process Safety Information, operating readiness and management-system requirements associated with hazardous materials.</li><li>Support training and competency development for engineering, commissioning and operations personnel.</li><li>Coordinate Design Near Miss initiatives and ensure timely follow-up and closure of associated actions.</li><li>Ensure HCIS Safety and Fire protection compliance across the project sites.</li><li>Review field changes and modifications for potential Process Safety consequences before implementation.</li><li>Ensure changes are reflected in applicable hazard assessments and Process Safety Information.<br><br></li></ul><strong>Qualifications<br><br></strong><ul><li>Bachelor's degree in Chemical Engineering, Process Engineering or a closely related engineering discipline.</li><li>Minimum of 10 years of experience in Industry</li><li>Strong professional experience in Process Safety within major process, chemical, energy, hydrogen, ammonia, oil &amp; gas or petrochemical facilities.</li><li>Demonstrable experience working on major-project commissioning, start-up and/or operating facilities.</li><li>Practical experience of Process Hazard Analysis and process-safety risk assessment.</li><li>Working knowledge of Process Safety Management frameworks and hazardous-process facilities.</li><li>Ability to work effectively across engineering, construction, commissioning, operations and safety organizations.<br><br></li></ul><strong>Preferred Experience<br><br></strong><ul><li>Hands-on experience facilitating HAZOP and LOPA workshops.</li><li>Experience with Management of Change and field-change risk assessment.</li><li>Experience supporting commissioning and operational-readiness programmes.</li><li>Experience with hydrogen, ammonia or other highly hazardous chemical facilities would be highly valuable.</li><li>Previous Middle East or Saudi Arabia major-project/site experience would be advantageous.</li><li>Experience taking process-safety recommendations from identification through practical field implementation and verified closure.<br><br></li></ul>Founded in 1940, Air Products is a world-leading industrial gases company and has a proud history of innovation, operational excellence, with an unwavering commitment to safety and environmental stewardship. Working together, we are taking our passion and diverse backgrounds forward to reimagine what’s possible and generate a cleaner future for our customers, our communities, and the world.

POSITION SUMMARYThis position will be part of NGHC (Neom Green Hydrogen Company) Operations based in Neom The Principal Process Safety Engineer is the technical cornerstone to the NGHC safety culture, where safety is in our DNA. This role manages the distinct high pressure and extreme flammability hazards of green hydrogen and the toxicity hazards of green ammonia among the process operating complexities of the plant. The role is responsible to lead all safety initiatives relative to the industrial processes on behalf of NGHC, facilitating the application of engineering principles for the design, construction, operation and maintenance on the NEOM Green Hydrogen Company, with the objective to develop, implement and maintain the Process Safety Management System for the company. The incumbent shall support all interface activities between all project contractors and NGHC as needed to support all Process Safety deliverables. NATURE & SCOPE<br>Lead and provide process safety services during the design and construction of all NEOM Green Hydrogen Company projects, including the remaining design and construction of the plant currently underway, ensuring that all related activities meet legal requirements and comply with project and industry safety standards. Provide expert process leadership and support for corporate business development initiatives. Serve as the Subject Matter Expert (SME) for hydrogen and ammonia safety chemistry, including embrittlement, cryogenic storage, and toxicity dispersion. Provide process safety training for project engineers, asset and reliability engineers, and integrated management and continuous improvement facilitators. Support operations’ process engineers. Own the Management of Change for process safety. Ensure seamless safety transitions Fulfil the role of Technical Authority for Technical Safety on behalf of NGHC for both the Project and Operations Establish and maintain technical safety standards, process safety operating procedures and systems as the Technical Authority Develop and conduct company process safety standards, tools, programs, training programs and work processes. Identify and implement continuous improvement efforts, including sustaining capital projects, for improved safety process performance. Lead and/or participate in Process Hazard Reviews, Gas Dispersion Modelling, Hazardous Area Classification, process safety studies, technical risk assessments, etc. to support the Project and Operations teams. Provide process safety consulting support and recommend optimal solutions to the site’s project execution, engineering, operating and commercial teams in execution of process safety requirements and to ensure compliance to Company standards and policies. Assist in the interpretation of national and local process safety Regulatory/Code requirements for Saudi Arabia and provide guidance to the site team. Assist in the assessment or review for regulatory and permitting process as required. Lead and support Root Causes Analysis (RCA) investigations for process safety. Apply Human Performance principles to process safety, particularly with RCAs and MOCs. Lead, facilitate, and train staff on HAZOP, HAZID, LOPA, and Quantitative Risk Assessments (QRA). Function as industry liaison to best practices in process safety including the Center for Chemical Process Safety (CCPS) in the American Institute of Chemical Engineers (AIChE) and The Mary Kay O’Connor Process Safety Center. Participate in leading industry forums to keep NGHC on the cutting edge of safety. Influence emerging global standards to improve industry safety practices while providing cost effective solutions. Oversee advanced consequence modeling for fire, explosion, and toxic gas release scenarios. Collaborate with the control systems engineers and instrument engineers to manage the Safety Instrumented Systems (SIS) lifecycle to ensure that the Safety Integrity Levels (SILs) meet targets. Identify and facilitate engineering and administrative improvements to reduce risk. Lead process safety standard improvement initiatives. Work closely with the NGHC projects and O&M team. Conduct dangerous goods assessments and compliance checks in support of permitting or licensing requirements. Provide support as required to ensure the successful implementation and execution of the NGHC Audit Plan PRINCIPAL DUTIES AND RESPONSBILITIESLead all safety initiatives relative to the industrial processes on behalf of NGHC, facilitating the application of engineering principles for the design, construction, operation and maintenance on the NEOM Green Hydrogen Company, with the objective to develop, implement and maintain the Process Safety Management System for the company. The incumbent shall support all interface activities between the Contractor and Company as needed to support all Process Safety deliverables. People Management Will manage the contractors that provide project, engineering, and construction services.<br>ESSENTIAL EDUCATION and/or QUALIFICATIONS REQUIREDBachelor’s degree in engineering with experience in Process and Process Safety Engineering.<br>DESIRED EDUCATION and/or QUALIFICATIONS REQUIREDTraining or certification from the Mary Kay O'Connor Process Safety Center (MKOPSC)

<p><strong><u>NEOM Green Hydrogen Company Limited (NGHC):</u></strong></p><p>NEOM Green Hydrogen Company (NGHC) is on a mission to make a carbon-free, climate-safe future a reality. We are building the world’s largest plant to produce green ammonia at scale, providing humankind with a cost-efficient solution that will accelerate the worldwide green hydrogen economy. Located in NEOM and supporting Saudi Arabia’s Vision 2030, NGHC will be integrating up to 4GW of onshore solar and wind energy to supply up to 650 tons of green ammonia per day for transportation globally. Operations will go onstream in 2026. NGHC brings together the technology, operational efficiency and know-how of ACWA Power, Air Products and NEOM in a joint-venture partnership with over 80 years of combined experience in the fields of hydrogen, energy, renewables and global networks.</p><p><br></p><p><strong><u>JOB DETAILS:</u></strong></p><p>Division: NGHC Operations.</p><p>REPORTS TO: NGHC Instrument Supervisor.</p><p>LIAISE/COOPERATE WITH: Air Products, External EPCs, Suppliers, NGHC Operation Directors, Operations and Maintenance Staff.</p><p><br></p><p><strong><u>POSITION SUMMARY:</u></strong></p><p>This position will be part of NGHC (Neom Green Hydrogen Company) Maintenance group.</p><p>Will be based in Neom Region. Plan and schedule maintenance activities, coordinating with operations, maintenance, engineering, and procurement teams to ensure timely execution. Timely and accurately reporting Maintenance KPIs. Allocate sufficient resources, including labour, materials, and tools, to maximize maintenance efficiency and manpower utilization.</p><p><br></p><p><strong><u>NATURE &amp; SCOPE:</u></strong></p><p>The main functions of this position are:</p><ul><li>Planning and Scheduling all Instrument Maintenance Jobs</li><li>Support in preparation and reporting of maintenance KPIs.</li><li>Effectively reporting of schedule Compliance, KPI parameters etc.</li><li>Report status of external jobs.</li><li>Single point of contact for contractors for external jobs.</li><li>Comply with NGHC Safety Standards.</li><li>Comply with NGHC contractors’ management system.</li><li>Manpower optimization and utilization.</li><li>Lead daily Operation and Maintenance coordination meeting.</li><li>Lead contractors Kick-Off meetings.</li><li>Interface with NGHC-MM and list out priorities, provide clear visibility on Hold for material orders.</li><li>Support on-call emergencies.</li><li>Ensure inventory control and balance for all instrument spare parts.</li></ul><p><br></p><p><strong><u>PRINCIPAL DUTIES AND RESPONSBILITIES:</u></strong></p><ul><li>Develop detailed maintenance schedules using software like <strong>SAP S/4Hana</strong>, <strong>MS Project</strong>, or other planning tools.</li><li>Domain expertise in SAP PM/maintenance modules; strong command of relevant SAP transactions and configuration.</li><li>Define work breakdown structures (WBS) and sequence activities efficiently.</li><li>Establish and maintain baseline schedules.</li><li>Identify and allocate manpower, equipment, tooling, spares and materials as per project needs.</li><li>Ensure optimal utilization of instrument resources to enhance productivity.</li><li>On-call support during plant emergencies, to plan any emergency maintenance activity.</li><li>Track and monitor the progress of electrical works against the schedule.</li><li>Generate weekly and monthly progress reports for NGHC management.</li><li>Identify delays, analyze root causes, and recommend corrective actions.</li><li>Ensure smooth coordination between different electrical activities and other disciplines.</li><li>Identify potential project risks (delays, resource shortages, design changes) and develop mitigation strategies.</li><li>Revise schedules as needed to accommodate unforeseen changes.</li><li>Monitor subcontractor performance to ensure adherence to Job timelines aligned with predetermined schedule.</li><li>Support in TA/SD job package preparation.</li><li>Act as Point of contact for external contractors.</li><li>Ability to act as SAP power user and Master Data specialist will be added advantage.</li><li>To prepare report based on KPIS.</li></ul><p><br></p><p><strong><u>PEOPLE MANAGEMENT:</u></strong></p><p>Act as single point of contact with contractors and external service providers.</p><p><br></p><p><strong><u>SKILLS / TECHNICAL KNOWLEDGE AREAS:</u></strong></p><ul><li>Demonstrated safe work skills</li><li>Experience: 7–10 years in Routine maintenance planning, Scheduling within petrochemical, or fertilizer and oil &amp; gas.</li><li>Ability to work collaboratively with various disciplines, Engineers, Plant managers to effectively schedule the activities.</li><li>Ability to work independently and complete tasks as scheduled is required</li><li>Experience of mentoring / coaching less experienced, Planners and Electrical technicians</li><li>Proficiency in Primavera P6, MS Project, SAP S4Hana, and ERP systems</li><li>Strong understanding of Instrument systems, control valves, analysers, Transmitters, vibration sensors, RTD, gauge, switches, flowmeters, electro-pneumatic positions for control valves, actuators, conductive limit detectors, etc.</li><li>Excellent analytical, problem-solving, and time-management skills.</li><li>Strong communication and teamwork abilities.</li><li>Negotiation skills.</li><li>Single point for contact with external contactors.</li></ul><p><br></p><p><strong><u>QUALIFICATIONS REQUIRED:</u></strong></p><ul><li>B.S. in Instrument Engineering or equivalent.</li></ul><p><strong><u>MINIMUM YEARS EXPERIENCE IN SIMILAR JOB ROLE:</u></strong></p><ul><li>7 - 12 years of relevant experience.</li></ul><p><br></p>

At Air Products, we reimagine what’s possible. By tapping into the motivation of our people and our collective experience, we create the ideas and innovations that drive us forward. When we come together – where every voice is heard and everyone knows they belong and matter – we create solutions that launch people into space, support lifesaving care in hospitals, and enable the construction of groundbreaking, world scale production facilities.<br><br><strong>Reimagine What’s Possible <br><br></strong>The Instrument &amp; Controls Engineer supports the NEOM Green Hydrogen Project (NGHP), one of Air Products’ most complex and strategically significant EPC projects executed for NEOM Green Hydrogen Company (NGHC). Air Products is responsible for delivering the entire project including the design, build, and delivery of the Process Controls / Process Automation Systems and associated IT/Digital Technology infrastructure, all of which must comply with local laws, regulations, and project‑specific cybersecurity requirements.<br><br>Based at the project site, the role contributes to the safe, compliant, and reliable implementation of PAS, BPCS, and vendor‑supplied control systems, with a strong emphasis on industrial cybersecurity field verification, validation, and documentation. The position plays a key role in close coordination with the Sub-Contractor / Technology Supplier and OEMs in ensuring the cybersecurity controls are implemented effectively without impacting schedule‑critical construction, commissioning, and startup activities.<br><br>The job is based out of Duba, Tabuk Region, Saudi Arabia working on rotation of 8 Weeks ON / 2 Weeks OFF.<br><br><strong>The role will be a site-based position with the below duties:<br><br></strong><ul><li>Member of a site cybersecurity task force, contributing instrumentation and controls expertise to field verification of cyber assets against project specifications and site acceptance criteria.</li><li>Acts as a technical interface between Air Products project execution teams, commissioning teams, client operations, and system/package vendors.</li><li>Supports construction, pre‑commissioning, commissioning, startup, and handover phases, ensuring cybersecurity and control system requirements are met throughout.</li><li>Provide site engineering support for instrumentation and control systems, including PAS, BPCS, and vendor‑supplied control packages and sub-contractors.</li><li>Participate in field verification of cyber assets, confirming compliance with project specifications, site acceptance criteria, and applicable cybersecurity regulations.</li><li>Coordinate closely with Field Supervision Engineers (FSEs) from PAS/BPCS vendors, Sub-Contractors and other package suppliers to plan and execute cybersecurity site validation and testing, including close-out of Cybersecurity Risk Assessment (CRA) recommendations.</li><li>Interface with Engineering, Pre‑Commissioning, Commissioning, and Client Operations teams on cybersecurity‑related field activities.</li><li>Support Factory Acceptance Tests (FAT), Site Acceptance Tests (SAT), loop checks, functional testing, and commissioning activities as assigned.</li><li>Review vendor documentation, test procedures, and evidence related to control systems and cybersecurity compliance.</li><li>Compile, review, and close out Proof of Compliance documentation, ensuring accuracy, traceability, and timely completion.</li><li>Assist with troubleshooting of instrumentation, control systems, networks, and interfaces during commissioning and startup.</li><li>Ensure cybersecurity controls are implemented in a manner that does not adversely impact schedule‑critical site activities.</li><li>Promote compliance with project safety, quality, and cybersecurity requirements across all assigned activities.<br><br></li></ul><strong>Minimum Requirements<br><br></strong><ul><li>Bachelor’s degree in engineering (Instrumentation, Control Systems, Electrical, Electronics, or related discipline).</li><li>At least 15 years of experience in instrumentation and control systems on industrial projects (e.g., energy, chemicals, oil &amp; gas, industrial gases).</li><li>Hands‑on exposure to PAS, BPCS, PLCs, DCS, and vendor‑supplied control systems.</li><li>Experience supporting site‑based construction, pre‑commissioning, commissioning, startup, or handover activities.</li><li>Ability to work effectively in a multicultural, site‑based project environment.</li><li>Experience supporting industrial control system (ICS) cybersecurity activities on capital projects</li><li>OT/ICS cybersecurity relevant accreditations such as ISA/IEC62443, SANS or other internationally recognized certifications are preferred.</li><li>Advanced skills in Microsoft Office tools such as Teams, SharePoint, Word, Excel, Power point and Visio etc.,</li><li>Excellent communication skills and the ability to communicate appropriately at all levels of the organization; this includes written and verbal communications<br><br></li></ul>Founded in 1940, Air Products is a world-leading industrial gases company and has a proud history of innovation, operational excellence, with an unwavering commitment to safety and environmental stewardship. Working together, we are taking our passion and diverse backgrounds forward to reimagine what’s possible and generate a cleaner future for our customers, our communities, and the world.<br><br>

At Air Products, we reimagine what’s possible. By tapping into the motivation of our people and our collective experience, we create the ideas and innovations that drive us forward. When we come together – where every voice is heard and everyone knows they belong and matter – we create solutions that launch people into space, support lifesaving care in hospitals, and enable the construction of groundbreaking, world scale production facilities.<br><br><strong>Reimagine What’s Possible <br><br></strong>NEOM Green Hydrogen Project is part of the most complex capital project and a flagship project at scale for Air Products. Air Products is executing an EPC Contract with the customer – NEOM Green Hydrogen Company (NGHC).<br><br>The Senior Project Engineer supports safe and timely delivery of the commissioning, startup, and turnover phases associated to NEOM Green Hydrogen Project, with additional responsibility to coordinate cybersecurity readiness activities in alignment with project execution requirements.<br><br>The role operates primarily at site and works across multi-disciplinary teams to manage interfaces between construction, commissioning, controls, IT/OT cybersecurity, subcontractors, and internal Air Products stakeholders. The job holder supports schedule, cost, risk, safety, quality, stakeholder management. The candidate shall have considerable priority to coordinate and facilitate the cybersecurity compliance readiness, ensuring that commissioning and handover activities are aligned with SAIS / HCIS and National Cybersecurity Authority (NCA) regulatory expectations.<br><br>The position focuses on coordination, follow up, escalation, and documentation, enabling technical leads and cybersecurity managers to remain focused on design and compliance decisions, while ensuring that actions, approvals, and dependencies are tracked and progressed during late execution phases.<br><br>This position is based out of Duba, Tabuk Region, Saudi Arabia working on rotation of 8 Weeks ON / 2 Weeks OFF.<br><br><strong>The position will be a site-based role with the below duties:<br><br></strong><ul><li>Support commissioning, startup, and turnover activities in accordance with approved project plans, safety requirements, and execution strategies.</li><li>Coordinate multi‑disciplinary interfaces (Electrical, Instrumentation, Controls, IT/OT, Mechanical, Construction, Operations) during commissioning readiness.</li><li>Track schedule progress, identify slippages, and expedite critical activities with subcontractors and internal teams; escalate delays through defined project governance.</li><li>Support cybersecurity readiness coordination during execution, commissioning, and turnover phases, in alignment with project cybersecurity plans.</li><li>Act as a site‑level coordination focal point for SAIS / HCIS and NCA‑related execution inputs, supporting internal alignment across Engineering, OT Cybersecurity, Digital Technology, and Project Controls teams.</li><li>Support organization and follow‑up of cybersecurity‑related coordination meetings with vendors, subcontractors, and internal teams; track actions and dependencies.</li><li>Maintain action trackers for commissioning and cybersecurity readiness items; ensure timely closure and transparent reporting to project leadership.</li><li>Support change management activities by ensuring that late design, installation, commissioning, or startup changes are reviewed for schedule, cost, and compliance impacts.</li><li>Identify, document, and escalate execution risks (technical, schedule, cybersecurity readiness, or stakeholder‑related) to the Project Manager and relevant leads.</li><li>Prepare and contribute to weekly and monthly execution status reports, including commissioning and cyber readiness highlights, risks, and constraints.</li><li>Promote a strong safety and compliance culture by ensuring commissioning and site activities adhere to approved procedures and regulatory expectations - including emergency management, emergency response related requirements<br><br></li></ul><strong>Minimum Requirements<br><br></strong><ul><li>Bachelor’s degree in Electrical Engineering, Instrumentation &amp; Controls, Electronics &amp; Communications, IT, or equivalent engineering discipline.</li><li>Minimum 10+ years of experience in Oil &amp; Gas or large industrial projects, with hands‑on exposure to commissioning, startup, or turnover phases in the Middle East.</li><li>Demonstrated experience across the project life cycle, including schedule, cost, risk, safety, quality, and stakeholder management.</li><li>Working knowledge of industrial control systems, OT environments, and execution‑phase coordination in EPC / PMC project</li><li>Demonstrates visible commitment to safety and regulatory compliance during commissioning and cyber‑related execution activities.</li><li>Supports adherence to Air Products EHS requirements, site procedures, and cybersecurity governance expectations.</li><li>Proactively identifies hazards, execution risks, and compliance gaps and ensures timely escalation.<br><br></li></ul>Founded in 1940, Air Products is a world-leading industrial gases company and has a proud history of innovation, operational excellence, with an unwavering commitment to safety and environmental stewardship. Working together, we are taking our passion and diverse backgrounds forward to reimagine what’s possible and generate a cleaner future for our customers, our communities, and the world.<br><br>

NEOM Green Hydrogen Company Limited (NGHC) NEOM Green Hydrogen Company (NGHC) is an equal joint venture between Air Products, ACWA Power, and NEOM responsible for the development of the NEOM Green Hydrogen Project in the autonomous NEOM region within the Kingdom of Saudi Arabia. The Project will see the construction of the world’s largest plant to produce green hydrogen at scale, producing up to 600 tonnes of carbon-free hydrogen per day through the integration of approximately 4GW of Solar and Wind energy. The plant will produce green ammonia for export to global markets and is scheduled to be onstream in 2026.<br>JOB DETAILS:Division: GH2 Operations. REPORTS TO: GH2 Maintenance Manager. LIAISE/COOPERATE WITH: Plant operation staff, technical support teams, purchasing, materials management teams and contractors.<br>POSITION SUMMARY:The Instrumentation Supervisor is a key member of the maintenance team for the GHE site in Neom. This position will be responsible for the instrumentation maintenance of the plants (Hydrogen, Ammonia, ASU, Utilities, and Jetty). The selected candidate will build strong relationships with the plant operating staff, technical support teams, as well as contractors. The position reports to the Maintenance Manager of GH2.<br>PRINCIPAL DUTIES AND RESPONSBILITIES:Working alongside the maintenance manager, must build the instrumentation maintenance team. Lead a team of 10 - 20 Instrumentation technicians and planners. Will be part of the working group that will be responsible for creating/reviewing the preventive maintenance plans. Drive the Instrumentation maintenance team towards compliance with maintenance performance metrics such as PM compliance, monthly spending vs budget and safety program participation. Ensure 100% compliance with regulatory and very high priority maintenance activities. Work with the maintenance and operations teams to prioritize, schedule, and perform all daily, weekly, and long-term maintenance activities. Prepare weekly and monthly reports. Coaching and development of Instrument technicians Availability to take calls after hours and weekends. Work with the materials management department to update spare parts information as necessary and to support inventory management activities. Elaborate technical specifications describing the scope of services for bidding process to select contractors. Provide support in the GHE site Turnarounds preparation. Actively participate in NGHC safety programs, promote, and enforce safety rules and good housekeeping methods. Ensuring application and compliance with all training, procedures, standards, specifications, KSA codes and statutory requirements. Continually evaluating maintenance methodologies, preventative/predictive programs, work practices, etc., to improve equipment integrity and reliability. Promote resource sharing across NGHC Operations. Rapid response and correction of regular and unplanned maintenance to prevent business loss. Provide support preparing of maintenance budgets for the production plants. Problem solving, making diagnoses, and implementing initiatives for problem resolution are part of his responsibilities. Actively participate in the pre-commissioning, commissioning, and start-up of the plants. Creating maintenances procedures as needed. Establish clear objectives for direct reports, communicating objectives and providing feedback through the annual performance review. Contractor management according AP procedures. Lead the implementation of changes through the MOC process. Approve and control overtime of technicians.<br>PEOPLE MANAGEMENT:10 - 20 direct and up to 50 contractors during turnarounds.<br>ESSENTIAL EDUCATION QUALIFICATIONS REQUIRED:The incumbent should possess a minimum Diploma or bachelor’s degree (additional preference) in an engineering discipline, or equivalent experience and a minimum of 15 years of related maintenance management experience in the industrial gas, chemical, refining and or related industry.<br>DESIRED QUALIFICATIONS REQUIRED:Experience in hazardous area instrumentation and safety systems (SIS, SIL). Understanding of ISO standards, IEC codes, and industry best practices. Familiarity with CMMS (Computerized Maintenance Management Systems) such as SAP PM.<br>MINIMUM YEARS OF EXPERIENCE:15 Years of Total Experience.5 Years of Managerial Experience.<br>SKILLS / TECHNICAL KNOWLEDGE AREAS:Engineering degree. Candidates must possess a strong safety focus and background.15+ years in a petrochemical with instrumentation maintenance experience. Must have extensive experience in calibration, COMMUNICATION PROTOCOLS, HART, MODBUS, PROFIBUS, analyzers, DCS, control valves electric and pneumatic, transmitters, switches and ATEX competency. Strong organizational planning skills with the ability to set priorities. Prior budgetary management and development experience is a plus. Demonstrated leadership and decision-making skills are critical to the position. High ethical standards - unwilling to compromise on worker safety and regulatory compliance requirements. Reading drawings such as Piping and instrumentation, electric and logic diagrams. Understanding of operating plant environment. Strong SAP skills are desired, ability to learn is crucial. Strong communicator written and oral. Strong and effective coordinator. Microsoft software skills, particularly Excel. Report writing skills.

NEOM Green Hydrogen Company Limited (NGHC) NEOM Green Hydrogen Company (NGHC) is on a mission to make a carbon-free, climate-safe future a reality. We are building the world’s largest plant to produce green ammonia at scale, providing humankind with a cost-efficient solution that will accelerate the worldwide green hydrogen economy. Located in NEOM and supporting Saudi Arabia’s Vision 2030, NGHC will be integrating up to 4GW of onshore solar and wind energy to supply up to 650 tons of green ammonia per day for transportation globally. Operations will go onstream in 2026. NGHC brings together the technology, operational efficiency and know-how of ACWA Power, Air Products and NEOM in a joint-venture partnership with over 80 years of combined experience in the fields of hydrogen, energy, renewables and global networks.<br>JOB DETAILSDivision: NGHC Operations. REPORTS TO: NH3 Plant Manager. LIAISE/COOPERATE WITH: Plant operation staff, maintenance Technicians, Technical Support Teams and contractors.<br>POSITION SUMMARYResponsible for the day-to-day operation of the NH3 Unit, which includes the operation and control: of the NH3 production, storage tanks and the loading process. The incumbent shall operate in accordance with company safety policies and site-specific procedures to ensure reliability, efficiency and productivity goals are met. Based in Neom, the position reports to NH3 Plant Manager.<br>NATURE & SCOPEThe main functions of this position are:<br>SAFETY FIRST, nothing is more important than safety, being fully aligned with all EH&S standards to achieve the goal of zero (0) lost time injuries in the NH3 production unit. Supervise DCS, data acquisition and alarm management systems, responding to normal and abnormal operating conditions of the plant to ensure quality, safety, efficiency, and production goals are met. Troubleshoot, respond to operating conditions, respond to customer order rates, and process optimization. Perform daily/monthly routines in accordance with operation and maintenance manuals, procedures, safety policies, and site-specific requirements. Candidates will be required to meet training requirements and successfully pass scheduled validation reviews. Actively participate in NGHC safety programs, promote, and enforce safety rules and good housekeeping methods. Act as a point of contact for daily operational communications with the operators of the other production units, H2, ASU and Utilities plants. Build and maintain a good relationship with all customers and stakeholders to ensure close cooperation. Understand the detailed Emergency Response Plan, accept authority in an emergency to take all steps necessary to protect personnel, and ensure safe operation or plant shut down. It is required to be qualified as a safe work permit issuer and confined space supervisor. Will issue work permits or act as a confined space supervisor when there is a requirement. Will be responsible of overall housekeeping in the control room. Will work rotating shifts. Will be on call during certain periods of time. Assist in updating operating procedures as required. KPIs follow up to ensure operation performance. Strong commitment to team building, integrity, and diversity. Provide shutdown support leading the operation activities. Provide training to new operators. Contribute to maintaining site management systems, e.g. MOC, BPs, SWIMs, JSAsHave a positive attitude.<br>PRINCIPAL DUTIES AND RESPONSBILITIES:The position is responsible for the safe and reliable operation of the NH3 production, storage tanks and the loading process following the NGHC standards. Will monitor compliance with EH&S standards for all daily activities performed at the plant. Will develop and update operation procedures. Will develop a relevant role in daily operational communications other production units.<br>PEOPLE MANAGEMENT:Will act as a new operator’s trainer.<br>SKILLS / TECHNICAL KNOWLEDGE AREAS:High school diploma in a technical discipline or equivalent experience Candidate must possess a strong safety focus and background. More than 5 years of experience in production plants DCS operation. Experience in handling PFDs, P&IDs, Single Line Diagrams and Shutdown Matrix. Basic computer proficiency and software knowledge, including Microsoft Word, Excel, and Outlook. Strong knowledge of work permits, confined spaces and LOTO. Must be willing to work 8-hr rotating shifts, including nights, weekends, and holidays. Must be willing to be on call. Ability to work alone in a control room. Ability to set priorities. Good command of written and spoken English. Proactive, honest, teamwork and hard working Be enthusiastic and willing to learn. Degree in a technical school is a plus. Plant maintenance experience is a plus. NH3 production experience is a plus.<br>QUALIFICATIONS REQUIREDHigh school diploma in a technical discipline and a minimum of 5 years of related plant operation experience in the industrial gas, chemical, refining and or related industry.

At Air Products, we reimagine what’s possible. By tapping into the motivation of our people and our collective experience, we create the ideas and innovations that drive us forward. When we come together – where every voice is heard and everyone knows they belong and matter – we create solutions that launch people into space, support lifesaving care in hospitals, and enable the construction of groundbreaking, world scale production facilities.<br><br>Reimagine What’s Possible <br><br>The Sr. Contract Administrator is responsible for implementing and administrating existing contracts in the current project on site in Duba, KSA.<br><br>This will be an on-site job in Duba working on rotation of 8X2, 60 hours per week.<br><br>Duties And Responsibilities, But Not Limited<br><br>Experience of management of FIDIC based re-measurable subcontracts for EPC contractor(s). Understanding of contracts commercial models application (Unit rates, reimbursable and Lump Sum) and the contract administration principles for managing and understanding of contract terms for contractual intent and application Change and claim management and administration. Preparing and maintaining detailed MOM, verifiable experiences on formulation of contractual correspondence (Letters, Site instructions, CCO, MOM, …) Collaboration with other Project teams (engineering, construction, commissioning, project controls, commercial etc),Implementing the Projects Subcontracts Strategy identifying the life of project requirements including working with planning and cost/estimating to understand budget allocations against contracts. Performance management of contracts. Support Structured weekly and monthly reporting<br><br>Minimum Requirements<br><br>Must have a Bachelors Degree At least 8-15 years of experience Strong experience in EPC Oil & Gas Company in the same position<br><br>Founded in 1940, Air Products is a world-leading industrial gases company and has a proud history of innovation, operational excellence, with an unwavering commitment to safety and environmental stewardship. Working together, we are taking our passion and diverse backgrounds forward to reimagine what’s possible and generate a cleaner future for our customers, our communities, and the world.

NEOM Green Hydrogen Company Limited (NGHC):NEOM Green Hydrogen Company (NGHC) is on a mission to make a carbon-free, climate-safe future a reality. We are building the world’s largest plant to produce green ammonia at scale, providing humankind with a cost-efficient solution that will accelerate the worldwide green hydrogen economy. Located in NEOM and supporting Saudi Arabia’s Vision 2030, NGHC will be integrating up to 4GW of onshore solar and wind energy to supply up to 650 tons of green ammonia per day for transportation globally. Operations will go onstream in 2026. NGHC brings together the technology, operational efficiency and know-how of ACWA Power, Air Products and NEOM in a joint-venture partnership with over 80 years of combined experience in the fields of hydrogen, energy, renewables and global networks.<br>JOB DETAILS:Division: NGHC Operations. REPORTS TO: NGHC Instrument Supervisor. LIAISE/COOPERATE WITH: Air Products, External EPCs, Suppliers, NGHC Operation Directors, Operations and Maintenance Staff.<br>POSITION SUMMARY:This position will be part of NGHC (Neom Green Hydrogen Company) Maintenance group. Will be based in Neom Region. Plan and schedule maintenance activities, coordinating with operations, maintenance, engineering, and procurement teams to ensure timely execution. Timely and accurately reporting Maintenance KPIs. Allocate sufficient resources, including labour, materials, and tools, to maximize maintenance efficiency and manpower utilization.<br>NATURE & SCOPE:The main functions of this position are:Planning and Scheduling all Instrument Maintenance Jobs Support in preparation and reporting of maintenance KPIs. Effectively reporting of schedule Compliance, KPI parameters etc. Report status of external jobs. Single point of contact for contractors for external jobs. Comply with NGHC Safety Standards. Comply with NGHC contractors’ management system. Manpower optimization and utilization. Lead daily Operation and Maintenance coordination meeting. Lead contractors Kick-Off meetings. Interface with NGHC-MM and list out priorities, provide clear visibility on Hold for material orders. Support on-call emergencies. Ensure inventory control and balance for all instrument spare parts.<br>PRINCIPAL DUTIES AND RESPONSBILITIES:Develop detailed maintenance schedules using software like SAP S/4Hana, MS Project, or other planning tools. Domain expertise in SAP PM/maintenance modules; strong command of relevant SAP transactions and configuration. Define work breakdown structures (WBS) and sequence activities efficiently. Establish and maintain baseline schedules. Identify and allocate manpower, equipment, tooling, spares and materials as per project needs. Ensure optimal utilization of instrument resources to enhance productivity. On-call support during plant emergencies, to plan any emergency maintenance activity. Track and monitor the progress of electrical works against the schedule. Generate weekly and monthly progress reports for NGHC management. Identify delays, analyze root causes, and recommend corrective actions. Ensure smooth coordination between different electrical activities and other disciplines. Identify potential project risks (delays, resource shortages, design changes) and develop mitigation strategies. Revise schedules as needed to accommodate unforeseen changes. Monitor subcontractor performance to ensure adherence to Job timelines aligned with predetermined schedule. Support in TA/SD job package preparation. Act as Point of contact for external contractors. Ability to act as SAP power user and Master Data specialist will be added advantage. To prepare report based on KPIS.<br>PEOPLE MANAGEMENT:Act as single point of contact with contractors and external service providers.<br>SKILLS / TECHNICAL KNOWLEDGE AREAS:Demonstrated safe work skills Experience: 7–10 years in Routine maintenance planning, Scheduling within petrochemical, or fertilizer and oil & gas. Ability to work collaboratively with various disciplines, Engineers, Plant managers to effectively schedule the activities. Ability to work independently and complete tasks as scheduled is required Experience of mentoring / coaching less experienced, Planners and Electrical technicians Proficiency in Primavera P6, MS Project, SAP S4Hana, and ERP systems Strong understanding of Instrument systems, control valves, analysers, Transmitters, vibration sensors, RTD, gauge, switches, flowmeters, electro-pneumatic positions for control valves, actuators, conductive limit detectors, etc. Excellent analytical, problem-solving, and time-management skills. Strong communication and teamwork abilities. Negotiation skills. Single point for contact with external contactors.<br>QUALIFICATIONS REQUIRED:B. S. in Instrument Engineering or equivalent. MINIMUM YEARS EXPERIENCE IN SIMILAR JOB ROLE:7 - 12 years of relevant experience.

At Air Products, we reimagine what’s possible. By tapping into the motivation of our people and our collective experience, we create the ideas and innovations that drive us forward. When we come together – where every voice is heard and everyone knows they belong and matter – we create solutions that launch people into space, support lifesaving care in hospitals, and enable the construction of groundbreaking, world scale production facilities.<br><br><strong>Reimagine What’s Possible <br><br></strong>Technical Cybersecurity Execution<br><br><ul><li>Support implementation, validation, and documentation of cybersecurity controls across GHE site systems, OT/ICS environments, industrial networks, cybersecurity tools, and supporting DT infrastructure.</li><li>Support cyber site acceptance testing activities, including preparation, execution support, evidence capture, defect logging, issue tracking, and closeout documentation.</li><li>Assist with proof-of-compliance documentation collection, validation, indexing, and quality review.</li><li>Review and support cybersecurity evidence related to network diagrams, system architecture, firewall rules, hardening standards, access control matrices, asset inventories, SIEM/monitoring configurations, and vendor compliance deliverables.</li><li>Support cyber hygiene activities with third-party vendors, subcontractors, and site teams.</li><li>Assist in tracking remediation of cybersecurity gaps, Cyber SAT findings, Cyber Risk Assessment recommendations, POC evidence gaps, and vendor documentation deficiencies.<br><br></li></ul>OT/ICS and Site Technical Support<br><br><ul><li>Support OT/ICS cybersecurity activities including system hardening, firewall configuration review, password management standards, secure remote access controls, endpoint/security tooling validation, DMZ implementation support, and network segmentation verification.</li><li>Participate in walkthroughs, field verification, technical reviews, and cybersecurity control validation activities.</li><li>Support evaluation of vendor and subcontractor deliverables for compliance with project cybersecurity requirements, Air Products standards, NCA/HCIS expectations, and approved architecture.</li><li>Work with process controls, DT infrastructure, plant computing, and vendor teams to resolve cybersecurity issues impacting commissioning, start-up, or handover readiness.</li><li>Support documentation of technical decisions, implementation status, deviations, risk acceptance items, compensating controls, and open action items.<br><br></li></ul>Compliance Documentation and Evidence Management<br><br><ul><li>Collect, organize, and maintain technical cybersecurity evidence needed for proof of compliance and regulatory readiness.</li><li>Support preparation of CSAT and POC documentation packages for review by the Cyber Lead, OT Cybersecurity, DT, NGHC, and external assessors.</li><li>Ensure documentation is complete, technically accurate, consistent, and traceable to applicable requirements.</li><li>Support responses to NGHC comments, third-party assessor findings, and follow-up requests related to cybersecurity evidence.</li><li>Maintain accurate trackers for cyber issues, documentation gaps, evidence status, and remediation actions.<br><br></li></ul>Vendor and Third-Party Support<br><br><ul><li>Coordinate with cybersecurity vendors, EPC subcontractors, OEMs, and external implementation partners during onsite execution, testing, and documentation activities.</li><li>Support external partners responsible for cybersecurity solution implementation, testing, documentation, and transition support.</li><li>Review vendor-submitted evidence and escalate incomplete, inconsistent, or non-compliant documentation to the Cyber Lead.</li><li>Support site supervision of third-party activities when required, including validation that field work aligns with approved cyber design and project requirements.<br><br></li></ul>Coordination and Reporting<br><br><ul><li>Provide status updates to the Cyber Lead on technical progress, blockers, risks, documentation gaps, and open actions.</li><li>Participate in weekly coordination meetings with OT Cybersecurity, DT, site project management, and other cyber stakeholders.</li><li>Support preparation of concise technical updates for project reporting, cyber oversight meetings, and senior management summaries.</li><li>Coordinate with DT infrastructure teams and site teams to ensure cybersecurity activities are integrated with broader implementation and commissioning work.<br><br></li></ul><strong>Required Qualifications And Experience<br><br></strong><ul><li>Strong understanding of OT/ICS cybersecurity principles, industrial networks, plant systems, industrial DMZs, secure remote access, system hardening, access control, monitoring, and cyber hygiene.</li><li>Working knowledge of KSA cybersecurity requirements related to NCA and HCIS, or ability to rapidly apply these requirements in an industrial project environment.</li><li>Experience supporting cybersecurity testing, audit readiness, proof-of-compliance documentation, or regulatory evidence collection.</li><li>Experience reviewing technical cybersecurity documentation such as network diagrams, firewall rules, system architecture, control matrices, asset inventories, hardening checklists, and monitoring configurations.</li><li>Ability to manage multiple technical tasks and documentation workstreams at the same time.</li><li>Strong written and verbal communication skills in English; Arabic language skills preferred.</li><li>Ability to work effectively with site teams, engineering teams, vendors, subcontractors, DT resources, and senior cybersecurity stakeholders.</li><li>Ability to operate in a fast-paced project environment with changing priorities, regulatory expectations, and commissioning dependencies.<br><br></li></ul><strong>Preferred Qualifications<br><br></strong><ul><li>Experience with NCA ECC, OTCC, HCIS/SAIS, IEC 62443, ISO 27001, NIST, CIS Controls, or similar cybersecurity control frameworks.</li><li>Experience in energy, industrial gas, chemical, utility, power generation, renewable energy, or critical infrastructure projects.</li><li>Experience with SIEM, OT monitoring, firewall rule review, PAM, vulnerability management, asset inventory, endpoint security, secure remote access, and industrial network segmentation.</li><li>Certifications such as GICSP, IEC 62443, Security+, CISSP Associate, CISM, CEH, or equivalent are preferred.</li><li>Prior Saudi Arabia, GCC, NEOM, or critical infrastructure project experience is preferred.<br><br></li></ul>Success Measures<br><br><ul><li>CSAT and POC evidence are collected, validated, organized, and maintained in a usable format.</li><li>Cybersecurity documentation gaps, technical issues, and remediation actions are tracked and closed.</li><li>Vendor and subcontractor cybersecurity deliverables are reviewed for completeness and quality.</li><li>Technical cybersecurity controls are validated against approved design, project requirements, and compliance expectations.</li><li>Cyber Lead, DT Project Manager, PDO Cybersecurity, and NGHC stakeholders receive accurate technical status updates.</li><li>Site cybersecurity activities support commissioning, start-up readiness, and regulatory compliance objectives.<br><br></li></ul>Founded in 1940, Air Products is a world-leading industrial gases company and has a proud history of innovation, operational excellence, with an unwavering commitment to safety and environmental stewardship. Working together, we are taking our passion and diverse backgrounds forward to reimagine what’s possible and generate a cleaner future for our customers, our communities, and the world.

About the Company NEOM Green Hydrogen Company (NGHC) is developing the world's largest green ammonia production facility, supporting Saudi Arabia's Vision 2030 and the global transition to sustainable energy. The project integrates up to 4 GW of renewable energy and is scheduled to commence operations in 2026.<br>Position Summary The Plant Computing Senior Engineer is responsible for the operation, support, and optimization of plant computing systems, with a focus on Aspen Tech solutions, operational technology (OT) systems, OT infrastructure, and IT/OT integration. The role ensures the reliability, availability, and cybersecurity of critical operational systems supporting production and engineering activities. Working closely with operations, engineering, IT teams, and external vendors, the successful candidate will troubleshoot issues, implement enhancements, and contribute to projects that improve plant performance and digitalization.<br>Key Responsibilities:<br>System Management & Support Operate, maintain, and support plant computing systems, including Aspen Tech solutions, SIMATIC, GE Vernova Advanced Energy Management System (E-Terra Habitat), and other engineering tools. Ensure the reliability, availability, and security of OT systems. Develop and execute maintenance schedules and strategies to minimize downtime. Project Support Participate in projects involving the implementation, upgrade, and optimization of OT systems. Collaborate with cross-functional teams to align project activities with business objectives and manufacturing requirements. Support project planning by providing technical expertise, testing, and documentation. Technical Expertise Provide technical support, administration, and troubleshooting for Aspen Tech and other OT solutions. Stay current with industry trends and emerging technologies. Support the integration and data flow between OT systems and IT platforms. Develop and maintain system documentation, procedures, and standards. Vendor & Stakeholder Collaboration Work with vendors and service providers to support OT systems. Evaluate products and services against operational requirements. Collaborate with internal stakeholders to address business needs related to OT systems. Security & Compliance Ensure OT systems comply with organizational security policies and regulatory requirements. Support cybersecurity measures to protect operational systems. Participate in audits and assessments to maintain compliance and system integrity.<br>Qualifications & Experience:<br>Education Bachelor's degree in Computer Science, Computer Engineering, Electrical Engineering, Industrial Engineering, Information Technology, or a related field. Master's degree is preferred but not required.<br>Experience Minimum of 5 years of experience in plant computing, OT systems, or industrial IT/automation environments. Hands-on experience with Aspen Tech solutions, including Aspen IP.21, Aspen Info Plus, or related tools. Strong understanding of operational technology systems, process control networks, and engineering software tools.<br>Technical Requirements Experience with IT/OT integration and industrial communication protocols such as Modbus, OPC, and MQTT. Knowledge of cybersecurity principles within OT/ICS environments and frameworks such as ISA/IEC 62443. Experience with Windows/Linux administration, virtualization, databases, and backup/recovery solutions. Familiarity with regulatory and compliance requirements in industrial and energy sectors.<br>Preferred Certifications Aspen Tech product certifications. ISA/IEC 62443 Cybersecurity certifications. Microsoft, VMware, or equivalent infrastructure certifications. ITIL Foundation certification.<br>Additional Responsibilities Support system audits, compliance reviews, and disaster recovery exercises. Assist in training plant personnel on OT and IT systems. Participate in cross-functional projects involving IT, OT, and process engineering teams. Support proof-of-concept evaluations for new technologies. Provide on-call support for critical OT and plant computing issues.<br>Skills & Technical Knowledge:<br>Technical Skills Proficiency in servers, networking, virtualization, and storage technologies. Experience with cloud platforms such as AWS and Azure. Strong understanding of IT/OT infrastructure, process control systems, and cybersecurity principles. Knowledge of industrial communication protocols and ITIL frameworks. Understanding of business continuity and disaster recovery practices.<br>Soft Skills Strong problem-solving and troubleshooting abilities. Excellent communication and collaboration skills. Ability to manage multiple priorities in a fast-paced industrial environment. Strong analytical and documentation skills. Excellent command of written and spoken English. Proactive, adaptable, and committed to continuous learning.