Management Information Systems - Qassim Saudi

<p><strong>Second: Job Objective</strong></p><p>The Cost Accountant is responsible for preparing and analyzing the cost of manufactured products, monitoring direct and indirect cost elements, linking them to actual production quantities, verifying the integrity of raw material and packaging material consumption, analyzing variances between actual and planned costs, and preparing periodic reports that assist management in increasing production efficiency, improving profit margins, and reducing waste and costs.</p><p><strong>Third: Key Duties and Responsibilities</strong></p><p><strong>1. Calculating Production Cost</strong></p><ul><li>Prepare and calculate the actual cost of manufactured products and items.</li><li>Calculate the cost per unit produced for each item and production volume.</li><li>Determine product cost components according to approved cost elements.</li><li>Prepare the cost of new products in coordination with relevant departments.</li><li>Update product costs when raw material prices or production elements change.</li><li>Monitor production order costs and compare them with standard or planned costs.</li></ul><p><strong>2. Monitoring Raw Materials and Inventory</strong></p><ul><li>Monitor the cost of raw materials, auxiliary materials, and packaging materials.</li><li>Review raw material purchase prices and their impact on product cost.</li><li>Reconcile material movement between warehouses, production, and the accounting system.</li><li>Review inventory balances and ensure the accuracy of accounting valuation.</li><li>Participate in periodic and surprise inventory counts.</li><li>Analyze variances resulting from inventory counts and verify their causes.</li><li>Monitor stagnant, slow-moving, and damaged materials and report on them.</li></ul><p><strong>3. Monitoring Production</strong></p><ul><li>Review production orders and planned vs. actual quantities.</li><li>Reconcile material quantities issued for production with those actually consumed.</li><li>Monitor scrap and loss rates during production stages.</li><li>Analyze variances in raw material consumption.</li><li>Coordinate with the production and warehouse departments to verify the causes of discrepancies.</li><li>Monitor work-in-progress and determine its cost according to approved accounting procedures.</li></ul><p><strong>4. Calculating and Analyzing Scrap</strong></p><ul><li>Monitor material quantities and scrap resulting from production operations.</li><li>Prepare periodic reports on scrap rates for each line or product.</li><li>Compare actual scrap rates with standard or approved rates.</li><li>Analyze the causes of increased scrap and submit appropriate recommendations.</li><li>Verify the recording of scrap and damaged goods according to approved procedures.</li></ul><p><strong>5. Indirect Industrial Costs</strong></p><ul><li>Collect and analyze indirect industrial expenses.</li><li>Allocate industrial costs to products based on appropriate allocation bases.</li><li>Monitor costs of electricity, water, gas, maintenance, spare parts, and other industrial expenses.</li><li>Monitor direct and indirect labor costs related to production.</li><li>Review industrial expense allocation bases and ensure their suitability for the nature of the activity.</li></ul><p><strong>6. Variance Analysis</strong></p><ul><li>Prepare an analysis of variances between actual cost and standard or estimated cost.</li><li>Analyze variances in raw material prices and quantities.</li><li>Analyze production, scrap, and consumption variances.</li><li>Identify the causes of increased product costs.</li><li>Report findings to management with the necessary recommendations to address variances.</li></ul><p><strong>7. Financial and Cost Reports</strong></p><ul><li>Prepare production cost reports periodically.</li><li>Prepare cost reports for each item and product.</li><li>Prepare profit margin reports by product or production line.</li><li>Prepare raw material consumption reports.</li><li>Prepare scrap and damaged goods reports.</li><li>Prepare cost variance and deviation reports.</li><li>Provide necessary data for preparing budgets and financial estimates.</li><li>Provide information and reports requested by financial management and senior management.</li></ul><p><strong>8. Pricing and Profitability</strong></p><ul><li>Provide management with the necessary data to determine product prices.</li><li>Analyze the profit margin for each product or product group.</li><li>Study the impact of changes in raw material prices on product profitability.</li><li>Calculate the expected cost of new products.</li><li>Support management in feasibility studies for adding new products or production lines.</li></ul><p><strong>9. Control and Reconciliation</strong></p><ul><li>Ensure the accuracy of recording transactions related to costs and inventory.</li><li>Reconcile production data with warehouse and accounting data.</li><li>Review accounting entries related to costs and inventory.</li><li>Ensure the application of approved financial policies and procedures.</li><li>Contribute to the development of control procedures for raw materials, inventory, and production.</li><li>Maintain the confidentiality of financial and cost data and reports.</li></ul><p><strong>Fourth: Food Factory Related Tasks</strong></p><ul><li>Monitor the cost of food raw materials according to actual purchase prices.</li><li>Monitor the cost of packaging materials, containers, and labels.</li><li>Calculate the cost of mixing, processing, and packaging according to production stages.</li><li>Monitor material consumption rates for each recipe or production formula.</li><li>Review standard quantities of materials used in the manufacture of each product.</li><li>Analyze variances between the approved production recipe and actual consumption.</li><li>Monitor production losses resulting from manufacturing, packaging, or storage.</li><li>Track products from raw materials to the final product.</li><li>Coordinate with production, quality, and warehouses regarding damaged goods, scrap, and reprocessing.</li><li>Calculate the cost of reprocessed or returned products according to accounting procedures.</li><li>Contribute to determining the true cost of a product before its launch or pricing.</li></ul><p><strong>Fifth: Educational Qualifications</strong></p><ul><li>Bachelor's degree in Accounting, Finance, or a related field.</li><li>Preferably holding certificates or specialized courses in:<ul><li>Cost Accounting.</li><li>Management Accounting.</li><li>Financial Data Analysis.</li><li>Inventory Management.</li><li>Manufacturing and Production Costs.</li></ul></li></ul><p><strong>Sixth: Required Experience</strong></p><ul><li>Appropriate experience in accounting, preferably in the field of cost accounting.</li><li>Previous experience in food factories or production plants is preferred.</li><li>Experience in calculating product costs and analyzing production costs.</li><li>Experience in dealing with inventory, production orders, and stock-taking.</li><li>Ability to analyze cost variances and deviations.</li><li>Experience in ERP systems and accounting and inventory systems is preferred.</li></ul><p><strong>Seventh: Skills and Abilities</strong></p><ul><li>Proficiency in using Excel and preparing reports and analytical tables.</li><li>Ability to analyze data and costs and draw conclusions.</li><li>Good knowledge of financial accounting and cost accounting.</li><li>Ability to handle large volumes of data.</li><li>High accuracy in auditing and calculations.</li><li>Ability to detect errors and discrepancies.</li><li>Good report writing skills.</li><li>Ability to work and coordinate with production, warehouse, procurement, quality, and sales departments.</li><li>Ability to work under the pressure of deadlines and monthly closings.</li><li>Maintain the confidentiality of financial and commercial information.</li></ul><p><strong>Eighth: Key Performance Indicators (KPIs)</strong></p><p>The performance of the Cost Accountant is evaluated based on several indicators, most notably:</p><ol><li>Accuracy of product cost calculation.</li><li>Accuracy and speed of preparing monthly cost reports.</li><li>Accuracy of reconciling inventory and production with accounting records.</li><li>Error rate in cost calculations.</li><li>Speed of detecting and analyzing variances.</li><li>Accuracy of scrap and damaged goods reports.</li><li>Adherence to financial closing deadlines.</li><li>Quality of product cost and profit margin analysis.</li><li>Accuracy of raw material and packaging cost data.</li><li>Contribution to discovering opportunities for cost reduction and waste minimization.</li></ol><p><strong>Tenth: Authorities</strong></p><ul><li>Access to data and documents related to costs, production, and inventory within the limits of authority.</li><li>Request necessary documents and data for preparing and analyzing costs.</li><li>Request clarifications from relevant departments regarding variances in production or inventory.</li><li>Submit observations and recommendations related to costs and waste to financial management.</li><li>Participate in stock-taking and reviews related to inventory and production.</li></ul><p><strong>Eleventh: General Responsibilities</strong></p><ul><li>Commitment to the financial systems, policies, and procedures approved by the company.</li><li>Maintain the confidentiality of financial and cost information.</li><li>Adherence to the factory's internal systems and regulations.</li><li>Adherence to safety and security requirements while in production areas.</li><li>Maintain documents, records, and data assigned to him.</li><li>Perform any other duties related to the nature of the work assigned by the direct supervisor.</li></ul><p><strong>Ultimate Job Objective</strong></p><p>Ensure <strong>accuracy and transparency in determining the cost of food products</strong>, improve control over raw materials, production, and inventory, reduce waste and unnecessary costs, and provide reliable financial and analytical information that helps management in <strong>pricing, increasing profitability, improving production efficiency, and making operational and strategic decisions</strong>.</p>

<p>Required experience: 2-5 years in general accounting and inventory management in the Kingdom of Saudi Arabia.</p><p>Main tasks: manage accounts using the Qawaq accounting software, separate activity accounts (cost centers), reconcile daily POS cash, and issue tax returns compliant with the Zakat, Tax and Customs Authority.</p><p>Requirements: valid and transferable residence permit (for non-Saudis), ability to work with cloud systems and tablets, English language at intermediate level to interact with workers; must have a car.</p>

Reab Rehabilitation Center announces a job vacancy for the position of Pharmacist (Male/Female)<br>(Saudi nationals only due to work and regulatory requirements)<br>to work within the medical team, contributing to dispensing medications and monitoring their safe use in accordance with approved regulations and instructions, ensuring quality of care and the safety of beneficiaries.<br>Tasks and Responsibilities:<br>Ability to establish and operate the internal pharmacy, including equipping it, organizing medications, completing regulatory requirements, and coordinating with the relevant authorities to obtain necessary licenses.<br>· Dispense medications to beneficiaries according to approved prescriptions.· Verify the accuracy of dosages and medication instructions before dispensing.· Educate beneficiaries on how to use medications and adhere to the treatment plan.· Monitor the availability of medications and pharmaceutical supplies and coordinate to secure needs.· Store and organize medications according to storage and safety requirements.· Collaborate with physicians and the clinical team to ensure the safe and effective use of medications.· Adhere to professional regulations and instructions and maintain the confidentiality of beneficiary information.<br>Required Qualifications:<br>Saudi National (Male/Female).Bachelor's degree in Pharmacy or Doctor of Pharmacy (PharmD).Valid professional classification and registration from the Saudi Commission for Health Specialties.Experience in the pharmacy field, preferably with previous pharmacy experience.Proficiency in dealing with customers and dispensing medications in accordance with regulations and instructions. Required Skills and Competencies:High accuracy in dispensing medications and reviewing prescriptions.Effective communication skills with beneficiaries and the medical team.Good knowledge of pharmacy regulations and medication safety.Ability to organize inventory and monitor pharmaceutical requirements.Commitment to professional ethics and quality healthcare.<br>Work Location:<br>Residence in the Qassim region<br>

Job Title: Warehouse Keeper Arif Al-Nahdi Company, specializing in the manufacture of fire-fighting pumps and safety systems, announces a job opening. Location: Al-Qassim Duties and Responsibilities: * Managing and monitoring inventory and warehouse operations. * Carrying out daily tasks related to organizing and arranging goods. Experience: * At least one year of prior experience in inventory and warehouse management. * Prior experience using Enterprise Resource Planning (ERP) software. Skills: * Knowledge of and readiness to operate a forklift for daily tasks. * Proficiency in using computers and software applications, particularly Microsoft Word and Excel. * Intermediate English language proficiency is preferred.<br><br><br><br>Job Title: Warehouse Keeper<br>Arif Al-Nahdi Company, specializing in the manufacture of fire-fighting pumps and safety systems, announces a job opening.<br>Location: Al-Qassim<br>Duties and Responsibilities:<br>* Managing and monitoring inventory and warehouse operations.<br>* Carrying out daily tasks related to organizing and arranging goods.<br>Experience:<br>* At least one year of prior experience in inventory and warehouse management.<br>* Prior experience using Enterprise Resource Planning (ERP) software.<br>Skills:<br>* Knowledge of and readiness to operate a forklift for daily tasks.<br>* Proficiency in using computers and software applications, particularly Microsoft Word and Excel.<br>* Intermediate English language proficiency is preferred.

<h3>About the Role</h3><p>Al-Taj Al-Mudhee Contracting Company announces a vacancy for a Project Management Manager to join its team in Qassim. The Project Management Manager oversees the general activities of project and program management, ensuring that defined goals are achieved within designated timelines and budgets. This is a full-time role requiring 2 to 5 years of experience.</p><h3>Key Duties and Responsibilities</h3><ul><li>Oversee the development and execution of project and program plans, direct financial budget estimation processes, and define necessary human, technical, and equipment requirements, ensuring their timely availability within the estimated costs.</li><li>Oversee the identification of project assumptions and interdependencies with other projects and programs to ensure optimal utilization of available resources, and identify project risks, developing necessary steps to avoid and resolve them.</li><li>Coordinate with the project team to review completed work and remaining phases, ensuring adherence to project scope, approved project management standards, and quality specifications, and manage change processes according to established plans.</li><li>Coordinate and follow up on the completion of major project milestones and the closure process, evaluate the extent to which project deliverables achieve their objectives, and ensure the transfer of knowledge and experience while documenting project-related files, templates, and reports.</li><li>Supervise the preparation of project progress reports, challenge and risk management reports, and periodic performance indicator and success factor measurement reports, submitting them to stakeholders and senior management.</li></ul><h3>Required Qualifications and Experience</h3><ul><li>Professional experience ranging from <strong>two to five years</strong> in project management.</li><li>Deep understanding of project and program management principles and processes.</li><li>Ability to effectively supervise and guide project teams.</li></ul><h3>Work Environment</h3><p>The Project Management Manager works full-time in Qassim within a dynamic work environment that requires constant coordination with multiple teams and stakeholders to ensure the achievement of project goals.</p><h3>Additional Information</h3><ul><li>Job Type: <strong>Full-time</strong></li><li>Region: <strong>Qassim</strong></li><li>Salary: <strong>Not disclosed</strong></li></ul><h3>How to Apply</h3><p>We invite interested candidates who meet the above requirements to apply for this role.</p>

<h3><strong>About the Role</strong></h3><p>Sag Al-Rakaya Company announces a job vacancy for a <strong>Project Manager</strong> to work full-time on the company's factory construction project in the Al-Qassim region, in the city of Buraydah. We are looking for a candidate with 8 years of experience in managing and executing industrial projects, especially factory construction and metal facility projects.</p><h3><strong>Job Purpose</strong></h3><p>The Project Manager is responsible for overseeing all stages of the project, from planning to final delivery, while ensuring that operations proceed according to approved timelines, budgets, and required technical specifications. The role aims to achieve project objectives efficiently and effectively, while adhering to quality and safety standards.</p><h3><strong>Key Tasks and Responsibilities</strong></h3><ul><li>Manage, plan, and monitor the execution of factory construction and metal facility projects.</li><li>Oversee all project stages, from planning to final delivery.</li><li>Prepare project schedules, monitor completion rates, and ensure compliance with approved timelines.</li><li>Supervise civil construction works and the installation of structures and metal facilities.</li><li>Coordinate with engineering teams, contractors, consultants, and suppliers to ensure efficient workflow.</li><li>Monitor costs and budgets and manage resources, equipment, and labor.</li><li>Ensure the application of quality and safety standards and compliance with technical specifications and project requirements.</li><li>Address technical and operational challenges and find appropriate solutions to ensure work continuity.</li><li>Prepare periodic reports on project progress and submit them to management.</li><li>Review engineering drawings and monitor the execution of works in accordance with approved drawings.</li></ul><h3><strong>Qualifications and Experience</strong></h3><ul><li>8 years of practical experience in managing and executing industrial projects, specifically factory construction and metal facility projects.</li><li>High leadership and organizational skills.</li><li>Ability to manage work teams effectively.</li><li>Ability to make decisions and solve problems effectively.</li></ul><h3><strong>Work Environment</strong></h3><p>The workplace is located in Al-Qassim, specifically at the factory construction project site in Buraydah. The position is full-time and requires presence at the site for direct supervision of operations.</p><h3><strong>Additional Information</strong></h3><p>The salary will be determined based on experience and qualifications after the personal interview. We encourage candidates who meet the above requirements to apply.</p>

Chief Financial Officer (CFO) Job Summary We are seeking an experienced and strategic Chief Financial Officer (CFO) to lead the company's financial operations and contribute to its long-term growth and profitability. The CFO will serve as a key member of the executive leadership team, responsible for developing and executing the company's financial strategy, ensuring financial sustainability, managing risks, and supporting strategic business decisions. The ideal candidate will possess strong leadership skills, extensive financial expertise, and a proven track record in driving financial performance, corporate governance, and operational excellence. Key Responsibilities Develop and execute the company's long-term financial strategy in alignment with business objectives. Lead financial planning, budgeting, forecasting, and performance analysis. Provide strategic financial insights and recommendations to the CEO and Executive Management. Oversee treasury, cash flow, liquidity, working capital, and capital allocation. Ensure accurate and timely preparation of financial statements and management reports. Lead financial risk management and strengthen internal controls and corporate governance. Ensure compliance with IFRS, tax regulations, and all applicable legal and regulatory requirements. Manage relationships with banks, investors, auditors, and other financial institutions. Support business expansion initiatives, mergers & acquisitions (M&A), and investment opportunities. Develop funding strategies and optimize the company's capital structure. Present financial performance and strategic recommendations to the Board of Directors and executive committees. Lead, mentor, and develop the finance team while fostering a high-performance culture. Drive financial process improvements through digital transformation and automation initiatives. Qualifications Bachelor's degree in Finance, Accounting, or a related field. MBA, CPA, CMA, ACCA, or an equivalent professional qualification is highly preferred. Minimum of 10 years of progressive finance experience, including at least 5 years in a senior financial leadership role. Strong knowledge of IFRS, corporate finance, financial planning, treasury, taxation, and risk management. Experience with ERP systems and advanced financial reporting tools. Proven leadership, communication, negotiation, and stakeholder management skills. Excellent analytical and strategic thinking abilities. Fluency in English; Arabic is an advantage.

<p>Accountant – Construction &amp; Real Estate</p><p><br></p><p>Company: Badhrah Investment Company</p><p>Location: Buraidah, Al-Qassim, Saudi Arabia</p><p>Workplace Type: On-site</p><p>Employment Type: Full-time</p><p><br></p><p>About the Role</p><p><br></p><p>Badhrah Investment Company is a Saudi startup based in Buraidah, operating in the construction and real estate development sectors. We are looking for a reliable, detail-oriented, and hands-on Accountant to support our growing operations and help build strong financial processes from an early stage.</p><p><br></p><p>The successful candidate will be responsible for day-to-day accounting, project cost tracking, financial reporting, reconciliations, and compliance support. This role requires close coordination with management, project teams, contractors, suppliers, and external advisers.</p><p><br></p><p>Previous experience in construction, contracting, project accounting, or real estate development is strongly preferred.</p><p><br></p><p>Qualifications and Experience</p><p>Bachelor’s degree in Accounting, Finance, or a closely related field.</p><p><br></p><p>Experience in construction, contracting, project accounting, property development, or real estate is strongly preferred.</p><p><br></p><p>Good understanding of accounting principles, financial reporting, reconciliations, accounts payable, accounts receivable, and cost control.</p><p>Practical knowledge of Saudi VAT and electronic invoicing requirements is preferred.</p><p>Strong Microsoft Excel skills and experience using an accounting system or ERP platform.</p><ul><li>Professional working proficiency in Arabic and the ability to communicate effectively in English.</li></ul>

<p>‏⁦</p><p><strong>Job Title:</strong> Materials / Concrete Quality Engineer (Materials / Quality Engineer)</p><p><strong>Location:</strong> Based on company project locations, Kingdom of Saudi Arabia</p><p><strong>Job Type:</strong> Full-time (Field / Concrete Lab)</p><p><strong>Job Purpose:</strong></p><p><strong>We are looking for a highly competent concrete materials engineer with a strong passion for work and performance development to join our team. You will be primarily responsible for efficiently designing concrete mixes and ensuring their compliance with specifications, with a primary focus on improving production quality, reducing raw material waste, and increasing operational cost efficiency, in addition to representing the company and gaining the trust of project consultants on site. This role requires full flexibility in mobility and working additional flexible hours according to project requirements.</strong></p><p><strong>Key Duties and Responsibilities:</strong></p><ul><li><strong>Design and Development of Concrete Mixes (Mix Design):</strong> Preparing and developing standard and special concrete mix designs based on project requirements and approved specifications.</li><li><strong>Dealing with Site Consultants:</strong> Discussing and approving concrete mixes with consultant engineers on site, and managing and resolving any technical feedback or discussions with professionalism and confidence.</li><li><strong>Implementing Quality Systems:</strong> Supervising the plant laboratory, and conducting periodic testing of raw materials (aggregates, sand, cement, chemical admixtures) and fresh and hardened concrete to ensure compliance with (ASTM / ACI / SASO).</li><li><strong>Cost Management and Waste Reduction:</strong> Analyzing material ratios in mixes to achieve maximum efficiency and the lowest possible cost without compromising quality, and working to reduce raw material waste during production and transport.</li><li><strong>Technical Production Monitoring and Problem Solving:</strong> Monitoring batch weighing accuracy, controlling temperatures, addressing any concrete defects, and offering immediate, convincing engineering solutions to the consultant and site.</li><li><strong>Field Flexibility:</strong> Willingness to travel and work across various company project sites and laboratories within the Kingdom, and covering overtime hours as required by site needs and concrete pours.</li></ul><p><strong>Qualifications and Requirements:</strong></p><ul><li>Bachelor's degree in <strong>Civil Engineering</strong>, <strong>Materials Engineering</strong>, or a related discipline.</li><li>Minimum of <strong>5 years</strong> of experience as a Materials Engineer in ready-mix concrete plants (Ready Mix).</li><li><strong>Full Flexibility and Readiness:</strong> Complete readiness to relocate and travel between various company project locations, and willingness to work overtime during peak workloads or night and continuous pours.</li><li><strong>Excellent Communication and Negotiation Skills</strong> and a high ability to interact positively and address feedback from project consultants on site.</li><li><strong>Passion and Self-Motivation:</strong> Genuine desire for field work, high productivity, and handling work pressure with positive energy and ambition to grow.</li><li>Thorough knowledge of American Society for Testing and Materials (<strong>ASTM</strong>), American Concrete Institute (<strong>ACI</strong>), and Saudi Standards (<strong>SASO</strong>).</li><li>Proven skill in <strong>Value Engineering</strong>, cost optimization, and waste reduction.</li><li><strong>Valid and Mandatory Membership</strong> in the Saudi Council of Engineers (SCE).</li></ul><p><br></p><p><br></p><p><strong>Job Title:</strong> Concrete Materials &amp; Quality Engineer</p><p><strong>Location:</strong> Based on Company Project Locations, Saudi Arabia</p><p><strong>Job Type:</strong> Full-time (On-site / Concrete Lab)</p><p><strong>Job Purpose:</strong></p><p>We are seeking a highly skilled, passionate, and driven Concrete Materials Engineer to join our Ready-Mix team. The ideal candidate will be responsible for developing concrete mix designs, maintaining strict quality control systems, optimizing costs, and effectively managing technical relationships with on-site consultants. <strong>This role demands high mobility across various project sites and the willingness to support extended work hours based on project milestones.</strong></p><p><strong>Key Responsibilities:</strong></p><ul><li><strong>Consultant Management &amp; Collaboration:</strong> Act as the primary technical point of contact for project consultants on-site, managing mix design approvals, addressing technical inquiries, and confidently resolving any quality concerns.</li><li><strong>Concrete Mix Design:</strong> Design, test, and optimize standard and specialized concrete mixes to meet project specifications and structural requirements.</li><li><strong>Quality Assurance &amp; Control:</strong> Oversee laboratory operations, conduct routine testing on raw materials (aggregates, cement, water, admixtures) and concrete in compliance with <strong>ASTM, ACI, and SASO</strong> standards.</li><li><strong>Cost Optimization &amp; Waste Reduction:</strong> Analyze mix designs to implement cost-effective formulations, minimize material wastage during batching, and maximize resource efficiency.</li><li><strong>Technical Troubleshooting:</strong> Investigate and resolve concrete-related issues and provide immediate engineering solutions acceptable to project consultants.</li><li><strong>Site Flexibility:</strong> Relocate or travel between different company project sites and concrete labs as needed, and manage site laboratory tasks during extended casting shifts.</li></ul><p><strong>Qualifications &amp; Requirements:</strong></p><ul><li>Bachelor’s degree in <strong>Civil Engineering</strong>, <strong>Materials Engineering</strong>, or a related technical field.</li><li>Minimum of <strong>5 years of proven experience</strong> as a Materials/QC Engineer strictly within the Ready-Mix Concrete industry.</li><li><strong>Mobility &amp; Overtime Availability:</strong> Full readiness to relocate/travel to different project locations across Saudi Arabia, and complete flexibility to work overtime hours (including night shifts or extended casting operations) when required.</li><li><strong>Strong interpersonal and negotiation skills</strong> with a proven track record of handling site consultants professionally.</li><li><strong>High energy and passion:</strong> Must possess a strong work ethic, a proactive mindset, and a genuine enthusiasm for engineering excellence.</li><li>Deep knowledge of <strong>ACI, ASTM, and SASO</strong> concrete standards.</li><li>Strong background in <strong>cost control, value engineering, and waste management</strong>.</li><li><strong>Valid and active membership</strong> with the Saudi Council of Engineers (SCE) is mandatory.</li></ul><p><br></p><p><br></p><p><br></p><p><br></p>

<p><strong>Job Advertisement | Licensed Lawyer</strong></p><p><strong>Fahd Al-Otaibi Law Office</strong> announces a job opportunity for a licensed female lawyer to work on-site in the city of <strong>Buraydah – Qassim Region – Kingdom of Saudi Arabia</strong>.</p><p><strong>Required Qualifications and Skills:</strong></p><ul><li>Valid license to practice law.</li><li>Commitment to working hours, accuracy in task completion, and maintaining confidentiality.</li><li>Proficiency in reviewing and auditing contracts, memoranda, and legal documents.</li><li>Skill in preparing regulations, memoranda, and pleading before judicial authorities.</li><li>Ability to visit courts, conduct field reviews at government agencies, and follow up on transactions.</li><li>Proficiency in case and deadline management and the use of judicial platforms.</li><li>Proficiency in administrative tasks, file organization, and coordination with the team.</li></ul><p><strong>Salary:</strong> To be determined during the personal interview.</p><p><strong>To apply:</strong> Send your CV to the email address:</p><p>lowfahed322@gmail.com</p><p><strong>For inquiries:</strong> 0568530779</p>

<h2 ><span lang="ar" dir="rtl">إعلان شركة أتمال عن وظيفة مسؤول هاتف مصرفي</span></h2><p ><span lang="ar" dir="rtl">تعلن شركة أتمال (الراجحي للخدمات الإدارية سابقًا) عن توفر فرصة وظيفية شاغرة للرجال والنساء (لا تتطلب خبرة)، وذلك للعمل في بريدة.</span></p><h2 ><span lang="ar" dir="rtl">الوصف الوظيفي</span></h2><p ><span lang="ar" dir="rtl">بصفتك ممثل خدمة عملاء عبر الهاتف، ستكون مسؤولًا عن التعامل مع استفسارات العملاء وحل مشكلاتهم بسرعة وكفاءة، وتقديم خدمة ذات جودة عالية مع الحفاظ على مستوى عالٍ من الاحترافية، لضمان تجربة إيجابية تعزز رضا العميل.</span></p><h2 ><span lang="ar" dir="rtl">المهارات</span></h2><ul><li><p ><span lang="ar" dir="rtl">مهارات التواصل اللفظي والكتابي باللغة العربية واللغة الإنجليزية.</span></p></li><li><p ><span lang="ar" dir="rtl">القدرة على التعامل مع العملاء بصورة احترافية وودية.</span></p></li><li><p ><span lang="ar" dir="rtl">القدرة على حل المشاكل والمواقف الصعبة بفعالية.</span></p></li><li><p ><span lang="ar" dir="rtl">القدرة على التعامل مع أنظمة الهاتف والحاسب.</span></p></li><li><p ><span lang="ar" dir="rtl">القدرة على العمل تحت ضغط وفي بيئة عمل ديناميكية.</span></p></li><li><p ><span lang="ar" dir="rtl">الالتزام بالوقت وإدارة الوقت بفعالية.</span></p></li><li><p ><span lang="ar" dir="rtl">المرونة والقدرة على التكيف مع متطلبات العمل المتغيرة.</span></p></li></ul><h2 ><span lang="ar" dir="rtl">نبذة عن الشركة</span></h2><p ><span lang="ar" dir="rtl">شركة أتمال (الراجحي للخدمات الإدارية سابقًا) هي إحدى قنوات المواهب للمصرف والشركات الأخرى التابعة له، وتهدف إلى تقديم الخدمات لعملائها وللمجتمع، مرتكزةً في ذلك على المعرفة المهنية والصدق والنزاهة.</span></p>

Reapp Rehabilitation announces a job vacancy for the position of "Security Guard" to work at the center's headquarters in the Qassim region – Al-Bukayriyah, and to contribute to providing a safe and organized environment within the center by managing entry and exit movements, implementing security and safety policies, and maintaining the privacy of residents and staff.<br>Tasks and Responsibilities:· Handling parking and dealing with emergency events.· Implementing the center's internal security policies.· Monitoring and reporting any violations.· Communication skills and respect for client privacy.· Monitoring building entrances and exits and preventing unauthorized entry.· Supervising camera and fire alarm systems.<br>Required Qualifications:High school diploma or higher.High level of physical fitness and ability to handle security work requirements within a rehabilitation environment.Previous experience in the security field or health institutions.Preferably holding certificates in security and safety.Ability to work at the center's headquarters in the Qassim region – Al-Bukayriyah.<br>Required Skills and Competencies:Discipline and adherence to regulations and instructions.Good conduct in various situations.Good communication skills with clients and the team.Ability to maintain confidentiality and privacy.Readiness to work in shift patterns according to work needs.<br>

<h3>About the Role</h3><p>Growth and Excellence Marketing Solutions is looking for a Production Supervisor to join its team in Qassim. The Production Supervisor is responsible for overseeing the product display and point-of-sale team, ensuring that display and promotion standards are applied effectively. This role aims to monitor product availability and shelf readiness, contributing to achieving sales targets and enhancing the customer experience.</p><h3>Key Tasks and Responsibilities</h3><ul><li>Direct supervision of the product display and point-of-sale team to ensure optimal performance.</li><li>Ensure that all specified display and promotion standards are applied accurately and effectively.</li><li>Continuous monitoring of product availability at points of sale and shelf readiness for display.</li><li>Contribute to achieving specified sales targets and enhancing customer satisfaction and experience.</li></ul><h3>Qualifications and Experience</h3><ul><li>Experience ranging from 0 to 1 year in a related field.</li><li>Ability to effectively supervise and guide teams.</li></ul><h3>Basic Requirements</h3><ul><li>Availability of private transportation, as the nature of the work is field-based and requires traveling between several locations.</li><li>Good knowledge of using smartphones and their applications.</li></ul><h3>Work Environment</h3><p>This role is a full-time job that requires field work in the Qassim region. The role requires flexibility in moving between different locations to ensure effective supervision of points of sale.</p><h3>Additional Information</h3><p>The salary for this role is undisclosed and will be discussed during the recruitment process. We encourage applicants who meet the requirements mentioned above to apply.</p>

<h3>About the Role</h3><p>Al-Watania Poultry (Saudi Arabia) is seeking a <strong>Maintenance Electrician</strong> to join their team in Al Qassim. This full-time role involves ensuring the continuous and problem-free operation of all machinery and production lines through daily fault resolution and the implementation of maintenance programs. The ideal candidate will have 2-5 years of relevant experience.</p><h3>Role Overview</h3><p>The Maintenance Electrician is responsible for maintaining and monitoring the performance of all factory equipment. This includes addressing daily operational faults, executing scheduled maintenance programs, and ensuring the readiness and continuity of production lines without interruption.</p><h3>Key Responsibilities</h3><ul><li>Perform maintenance work and execute programs for various equipment within the factory.</li><li>Document all completed work, including detailed information.</li><li>Inspect and monitor the performance of production lines and all machinery.</li><li>Submit regular reports to the department supervisor.</li></ul><h3>Qualifications and Experience</h3><ul><li>A minimum of <strong>2-5 years of experience</strong> in a similar maintenance role.</li><li>Demonstrated ability to diagnose and resolve electrical faults in industrial machinery.</li><li>Proficiency in implementing and adhering to maintenance schedules.</li></ul><h3>Work Type and Location</h3><p>This is a <strong>full-time position</strong> based in <strong>Al Qassim</strong>, Saudi Arabia. The role requires on-site presence to manage and maintain factory operations effectively.</p><h3>Application Process</h3><p>Interested candidates who meet the qualifications are encouraged to apply. Salary details will be discussed during the interview process.</p>

<p>We are looking for a detail-oriented and motivated <strong>General Accountant</strong> to join our finance team at <strong>Al Habib Bedding</strong>, a growing retail company in Saudi Arabia.</p><p><strong>Responsibilities</strong></p><ul><li>Record and maintain daily accounting transactions and journal entries.</li><li>Perform bank reconciliations and monitor financial transactions.</li><li>Manage accounts payable and accounts receivable.</li><li>Prepare monthly financial reports and support month-end closing.</li><li>Review branch sales, cash collections, and financial reconciliations.</li><li>Monitor inventory transactions and assist with stock reconciliations.</li><li>Prepare VAT returns and ensure compliance with ZATCA regulations.</li><li>Assist with budgeting, expense tracking, and financial analysis.</li><li>Maintain accurate financial records and supporting documentation.</li></ul><p><strong>Qualifications</strong></p><ul><li>Bachelor's degree in Accounting or a related field.</li><li><strong>2–4 years of relevant accounting experience.</strong></li><li>Good knowledge of accounting principles and financial reporting.</li><li>Proficiency in Microsoft Excel and Microsoft Office.</li><li>Experience with accounting software and ERP systems.</li><li><strong>Experience with Odoo ERP is an added advantage.</strong></li><li>Knowledge of Saudi VAT regulations.</li><li>Strong analytical skills, attention to detail, and organizational abilities.</li><li>Previous experience in the retail sector is preferred.</li></ul><p><strong>Employment Type:</strong> Full-time</p><p><strong>Industry:</strong> Retail – Home &amp; Bedding</p><ul><li>If you meet the qualifications, we encourage you to apply and join our growing team.</li></ul>

<h3>About the Role</h3><p>Al Habib Bedding, a growing retail company in Al Qassim, Saudi Arabia, is seeking a <strong>General Accountant</strong> to join its finance team. This is a full-time position requiring 2-5 years of relevant experience. The role focuses on maintaining accurate financial records and supporting various accounting functions within the company.</p><h3>Key Responsibilities</h3><ul><li>Record and maintain daily accounting transactions and journal entries.</li><li>Perform bank reconciliations and monitor financial transactions.</li><li>Manage accounts payable and accounts receivable.</li><li>Prepare monthly financial reports and support month-end closing procedures.</li><li>Review branch sales, cash collections, and financial reconciliations.</li><li>Monitor inventory transactions and assist with stock reconciliations.</li><li>Prepare VAT returns and ensure compliance with ZATCA regulations.</li><li>Assist with budgeting, expense tracking, and financial analysis.</li><li>Maintain accurate financial records and supporting documentation.</li></ul><h3>Qualifications and Experience</h3><ul><li>Bachelor's degree in Accounting or a related field.</li><li>2-5 years of experience in a general accounting role.</li><li>Previous experience in the retail sector is preferred.</li></ul><h3>Required Skills</h3><ul><li>Good knowledge of accounting principles and financial reporting standards.</li><li>Proficiency in Microsoft Excel and other Microsoft Office applications.</li><li>Experience with accounting software and ERP systems.</li><li>Knowledge of Saudi VAT regulations.</li><li>Strong analytical skills and attention to detail.</li><li>Excellent organizational abilities.</li></ul><h3>Work Environment</h3><p>This role is based in Al Qassim, Saudi Arabia, and operates on a full-time schedule within the finance department of Al Habib Bedding.</p>

<p>Electrical &amp; Electronics Technician – Fresh Graduate</p><p><strong>Department:</strong> Service &amp; Maintenance</p><p><strong>Location:</strong> Jeddah / Dammam, Saudi Arabia</p><p><strong>Employment Type:</strong> Full-time</p><p><strong>Experience Level:</strong> Entry Level</p><p><strong>Experience Required:</strong> 0–1 years</p><p><br></p><p><strong>Job Summary</strong></p><p><br></p><p>We are looking for an <strong>Electrical &amp; Electronics Technician</strong> to join our Service &amp; Maintenance team. This position is suitable for <strong>fresh graduates</strong> with a Diploma or technical qualification in Electrical Engineering, Electronics, Electromechanical Engineering, or a related field.</p><p>The role involves diagnosing, testing, repairing, and maintaining small home appliances and electrical/electronic components while following approved technical procedures, safety standards, and product maintenance manuals.</p><p><br></p><p><strong>Key Responsibilities</strong></p><ul><li>Diagnose electrical and electronic faults in small home appliances and determine the appropriate repair method.</li><li>Inspect, test, dismantle, repair, and reassemble appliances safely and efficiently.</li><li>Repair small home appliances such as microwaves, blenders, electric kettles, vacuum cleaners, irons, coffee machines, toasters, and similar products.</li><li>Replace defective components, including motors, switches, thermostats, heating elements, PCBs, and other electrical/electronic parts.</li><li>Perform operational tests after repairs to ensure products are functioning properly and meet required performance standards.</li><li>Execute maintenance and repair activities within the required turnaround time and according to product specifications and service manuals.</li><li>Request required spare parts from the Spare Parts Department for product repairs.</li><li>Record spare parts used and document repair details in the company's system and/or service documents.</li><li>Communicate with Service Advisors, Supervisors, and Senior Technicians regarding repair status, technical issues, and any work-related obstacles.</li><li>Escalate complex technical issues to the Supervisor or Senior Technician when required.</li><li>Maintain a clean, organized, and safe workshop and service area.</li><li>Follow all company policies, technical procedures, and health and safety requirements.</li><li>For home-service assignments, collect customer payments when applicable and submit the collected amounts to the Service Center within the required timeframe</li></ul><p><br></p><p><strong>Qualifications</strong></p><p><br></p><ul><li>Diploma or technical certificate in <strong> Electronics, Engineering, or a related field</strong>.</li><li>0–1 years of relevant experience.</li><li>Basic knowledge of electrical and electronic components and troubleshooting.</li><li>Basic understanding of electrical safety and maintenance procedures.</li><li>Ability to read and follow technical manuals, wiring diagrams, and maintenance instructions.</li><li>Good problem-solving and troubleshooting skills.</li><li>Ability to work independently and as part of a team.</li><li>Willingness to learn and develop technical skills in home appliance repair and maintenance.</li></ul><p>Preferred Qualifications</p><ul><li>Previous <strong>Co-op training, internship, or practical training</strong> in Electrical Engineering, Electronics, or a related field is a <strong>plus</strong>.</li><li>Familiarity with electrical testing equipment such as a <strong>multimeter</strong> is a plus.</li><li>Basic understanding of <strong>PCBs and electronic components</strong>.</li><li>Basic knowledge of electrical and electronic troubleshooting.</li><li>Good attention to detail and commitment to quality.</li><li>Good communication and interpersonal skills.</li><li>Willingness to work in a <strong>service center and/or field-service environment</strong>.</li></ul><p><br></p>

Sales Supervisor – Masters Way Sport Center<br>Location: Buraydah | Full-time – On-site<br>About the Club<br>Masters Way Sport Center is a comprehensive sports facility aiming to provide a high-quality sports experience through a professional and motivating environment, offering diverse services and training programs that meet client needs.<br>We believe in continuous improvement, teamwork, enhancing the customer experience, and focusing on staff development by building clear career paths.<br>Job Description<br>We are looking for a Sales Supervisor with a leadership spirit, strong ability to meet targets, and efficiency in managing the sales team.<br>The Sales Supervisor will oversee daily sales operations, monitor team performance, develop their skills, and ensure sales targets are met while maintaining an excellent level of customer service.<br>Tasks and Responsibilities<br>* Managing and monitoring the sales team and achieving daily and monthly targets.<br>* Tracking performance indicators and submitting periodic reports to management.<br>* Training and motivating the sales team to improve performance and sales closing rates.<br>* Organizing schedules and tasks for the sales team.<br>* Following up with leads and sales opportunities to ensure quality engagement.<br>* Handling client inquiries, resolving issues, and supporting important deals.<br>* Participating in the execution of sales offers and campaigns.<br>* Analyzing sales data to identify opportunities for improvement and growth.<br>* Coordinating with management regarding pricing, offers, and sales plans.<br>* Ensuring adherence to club policies, standards, and customer experience quality.<br>Required Qualifications<br>* Previous experience in sales management or supervision and team leadership.<br>* Proven ability to achieve sales targets.<br>* Strong communication, negotiation, persuasion, and closing skills.<br>* Ability to manage, motivate, and follow up with a sales team.<br>* Good knowledge of tracking performance indicators, reporting, and sales analysis.<br>* Strong organizational, time management, and follow-up skills.<br>* Proficiency in Arabic; English language proficiency is an added advantage.<br>* Experience in the sports sector, gyms, or fitness centers is an advantage.<br>* High school diploma as a minimum; a degree in Business Administration, Marketing, or a related field is preferred.<br>* Willingness to work on-site in Buraydah and availability to work evenings and weekends when necessary.