Document Controller - Jubail Saudi

SECTION I: Job Summary <br><br>The QC Inspector - Fireproofing performs inspection and testing of passive fireproofing application activities to verify compliance with drawings, specifications, and applicable codes and standards.<br><br>SECTION II: Job Analysis <br><br>Duties & Responsibilities<br><br> Perform in-process and final inspections on fireproofing application works Verify surface preparation, primer, and fireproofing material application against specifications Witness thickness (DFT/WFT) checks and adhesion tests per the ITP Verify materials and batch certificates against approved specifications Record inspection results and raise Non-Conformance Reports as required Coordinate hold points and inspections with client/third-party inspectors Maintain inspection records, checklists, and daily QC reports Verify calibration status of measuring and test equipment (thickness gauges) used on site Support punch-list generation and verification of closure for fireproofing works Ensure work fronts comply with approved method statements and fireproofing standards Support preparation of quality documentation for fireproofing handover dossiers<br><br>Requirements<br><br>SECTION III: Performance Indicators<br><br>Evaluated Based on<br><br> Inspection accuracy and completeness Timely identification and reporting of non-conformances First-time inspection pass rate on assigned work fronts Adherence to inspection schedules/hold points Quality of inspection documentation<br><br>SECTION IV: Required Skills & Abilities <br><br>Core Competencies<br><br>Attention to Detail Integrity Analytical Thinking Communication Skills Time Management<br><br>Technical Skills<br><br> Fireproofing/Passive Fire Protection Inspection Techniques Surface Preparation & Coating Application Standards Thickness (DFT/WFT) & Adhesion Testing Inspection & Test Plans (ITPs) Measuring & Testing Equipment Use QC Documentation & Reporting<br><br>SECTION V: Required Experience and Education <br><br>Experience<br><br> 5-8 years of experience as a QC Inspector on fireproofing/coating application projects<br><br>Education<br><br> Diploma or Bachelor's degree in Mechanical/Civil Engineering NACE/coating inspection certification preferred

SECTION I: Job Summary <br><br>The QC Inspector - Piping performs inspection and testing of piping fabrication and installation activities to verify compliance with isometrics, welding procedures, and applicable codes and standards.<br><br>SECTION II: Job Analysis <br><br>Duties & Responsibilities<br><br> Perform in-process and final inspections on piping fabrication and installation works Witness hydrotests, NDE activities (RT/UT/PT/MT), and other required tests per the ITP Verify pipe fit-up, alignment, and welding against approved isometrics and WPS Verify materials, spools, and fittings against material certificates and specifications Record inspection results and raise Non-Conformance Reports as required Coordinate hold points and inspections with client/third-party inspectors Maintain inspection records, checklists, and daily QC reports Verify calibration status of measuring and test equipment used on site Support punch-list generation and verification of closure for piping works Ensure work fronts comply with approved method statements and piping codes (ASME B31.3) Support preparation of quality documentation for piping handover dossiers<br><br>Requirements<br><br>SECTION III: Performance Indicators<br><br>Evaluated Based on<br><br> Inspection accuracy and completeness Timely identification and reporting of non-conformances First-time weld/inspection acceptance rate Adherence to inspection schedules/hold points Quality of inspection documentation<br><br>SECTION IV: Required Skills & Abilities<br><br>Core Competencies<br><br> Attention to Detail Integrity Analytical Thinking Communication Skills Time Management<br><br>Technical Skills<br><br> Piping Inspection Techniques Reading Isometrics, P&IDs & Welding Maps Welding Inspection & NDE Awareness (RT/UT/PT/MT) Inspection & Test Plans (ITPs) Measuring & Testing Equipment Use QC Documentation & Reporting<br><br>SECTION V: Required Experience and Education<br><br>Experience<br><br> 5-8 years of experience as a QC Inspector on piping construction/fabrication projects<br><br>Education<br><br> Diploma or Bachelor's degree in Mechanical Engineering QC/inspection certification (e.g., CSWIP, CWI) preferred<br><br>SECTION VI: LEVEL OF AUTHORITY<br><br>Supervisory / Managerial: No supervisory responsibility.<br><br>Financial: No financial or budget authority.<br><br>SECTION VII: MISCELLANEOUS JOB-SPECIFIC REQUIREMENTS<br><br>General Profile / Specifications:<br><br> Field-based role requiring daily presence on active piping work fronts Exposure to site/construction conditions May require shift work or extended hours to cover inspection hold points

<h3 >About KBR Sustainable Technology Solutions</h3> <p >KBR Sustainable Technology Solutions (STS) delivers comprehensive, value-added solutions across the entire asset life cycle. This includes world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design capabilities, and smart solutions designed to optimize planned and operating assets.</p> <h3 >The Role of Contracts Administrator</h3> <p >KBR Saudi Arabia is seeking a Contracts Administrator to join our team in Al Jubail. This full-time role is essential for managing the contractual framework, ensuring compliance, and facilitating smooth operations within the organization. The Contracts Administrator will be responsible for overseeing various aspects of contract documentation and stakeholder coordination.</p> <h3 >Core Responsibilities</h3> <ul > <li >Prepare, edit, and review contract documents to ensure clarity, accuracy, and full compliance with company policies and legal requirements.</li> <li >Monitor compliance to ensure all parties fulfill their contractual obligations in line with agreed terms, established timelines, and relevant regulations.</li> <li >Maintain an organized and accessible repository of contracts and all related correspondence for efficient record-keeping and retrieval.</li> <li >Liaise effectively with project managers, procurement, finance, and legal teams to ensure seamless contract execution and robust inter-departmental coordination.</li> </ul> <h3 >Required Experience and Attributes</h3> <p >Candidates for this position should possess <strong>2-5 years of relevant experience</strong> in a contracts administration role. We are looking for professionals who demonstrate the following key attributes:</p> <ul > <li >Strong attention to detail, particularly when reviewing legal and financial terms.</li> <li >Well-organized and proactive approach with excellent communication skills.</li> <li >Proven leadership skills, ideally gained within large organizations.</li> <li >Maturity of judgment under pressure and a demonstrated ability to resolve problems effectively.</li> <li >Strategic thinking and an openness to new ideas and innovative approaches.</li> <li >Ability to achieve business results while working effectively in a multi-cultural environment.</li> </ul> <h3 >Work Environment</h3> <p >This is a full-time position based in Al Jubail, Saudi Arabia. The role offers an opportunity to contribute to KBR's projects within a dynamic and collaborative work setting.</p> <h3 >Application Information</h3> <p >We invite qualified candidates to apply for this Contracts Administrator position and become a part of the KBR Saudi Arabia team.</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Review all ITB documents and prepare the BOQ or verify the BOQ available in the Tender package.</p><ul><li><p>Participate in the job explanation meeting conducted by client</p></li><li><p>Participate in Site visit to know the site condition such as site accessibility, availability of electricity and other utilities.</p></li><li><p>Prepare a site visit report along with project synopsis to keep with the bid documents</p></li><li><p>Fully understand and interpret Drawings and Design Plans</p></li><li><p>Prepare detailing of all materials required for the project falls under contractor’s scope. Get latest quotations from the approved suppliers.</p></li><li><p>Get prices from subcontractors, if any portion of the project is to be subcontracted.</p></li><li><p>Prepares cost summaries for the entire project, this includes Direct &amp; Indirect cost such as materials, equipment, labor costs, taxes, insurance, sub-contractor’s price etc. and any other costs required for the project as per prevailing system in the company and project requirement.</p></li><li><p>Get the cost summary reviewed from the Estimation Manager and incorporate the comments after review.</p></li><li><p>Prepare a proposed execution schedule including material delivery plan. The level of execution schedule to be prepared will be depend on the client requirement. Usually up to level-3 schedule will be prepared at this stage.</p></li><li><p>Prepare technical proposal based on the guidelines provided in the ITB.</p></li><li><p>Track and maintain all estimations for further analysis. Evaluate changes and review estimations to ensure accurate project development.</p></li><li><p>Prepare a proposed Organization Chart for the project taking client’s requirement into account.</p></li><li><p>Upon award of the contract, facilitate the handover process and explain the job to the Project team</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Estimation Engineer Mechanical – 5-8 years of experience in Mechanical Estimation for Oil and Gas, Petrochemical, industrial projects and shutdowns </p><p></p></section>

SECTION I: Job Summary <br><br>The QC Inspector - Structural performs inspection and testing of structural steel fabrication and erection activities to verify compliance with drawings, specifications, and applicable codes and standards.<br><br>SECTION II: Job Analysis <br><br>Duties & Responsibilities<br><br> Perform in-process and final inspections on structural steel fabrication and erection works Witness structural bolting, welding, and alignment checks per the ITP Verify structural steel installation against approved drawings, erection plans, and tolerances Verify materials (structural steel, bolts, coatings) against material certificates and specifications Record inspection results and raise Non-Conformance Reports as required Coordinate hold points and inspections with client/third-party inspectors Maintain inspection records, checklists, and daily QC reports Verify calibration status of measuring and test equipment used on site Support punch-list generation and verification of closure for structural works Ensure work fronts comply with approved method statements and structural codes (AISC, etc.) Support preparation of quality documentation for structural handover dossiers<br><br>Requirements<br><br>SECTION III: Performance Indicators<br><br>Evaluated Based on<br><br> Inspection accuracy and completeness Timely identification and reporting of non-conformances First-time inspection pass rate on assigned work fronts Adherence to inspection schedules/hold points Quality of inspection documentation<br><br>SECTION IV: Required Skills & Abilities <br><br>Core Competencies<br><br>Attention to Detail Integrity Analytical Thinking Communication Skills Time Management<br><br>Technical Skills<br><br> Structural Steel Inspection Techniques Reading Structural/Erection Drawings Bolting & Welding Inspection Standards (Structural) Inspection & Test Plans (ITPs) Measuring & Alignment Equipment Use QC Documentation & Reporting<br><br>SECTION V: Required Experience and Education <br><br>Experience<br><br> 5-8 years of experience as a QC Inspector on structural steel construction projects<br><br>Education<br><br> Diploma or Bachelor's degree in Civil/Structural Engineering QC/inspection certification preferred

SECTION I: Job Summary <br><br>The QC Inspector - Mechanical performs inspection and testing of mechanical equipment installation activities to verify compliance with drawings, specifications, and applicable codes and standards.<br><br>SECTION II: Job Analysis <br><br>Duties & Responsibilities<br><br> Perform in-process and final inspections on mechanical equipment installation works (pumps, vessels, packages, structural skids) Verify equipment installation, alignment, and grouting against approved drawings and vendor specifications Witness mechanical running tests, alignment checks, and equipment box-up activities per the ITP Verify materials and equipment against material certificates, vendor data, and specifications Record inspection results and raise Non-Conformance Reports as required Coordinate hold points and inspections with client/third-party inspectors Maintain inspection records, checklists, and daily QC reports Verify calibration status of measuring and test equipment used on site Support punch-list generation and verification of closure for mechanical works Ensure work fronts comply with approved method statements and mechanical equipment standards Support preparation of quality documentation for mechanical handover dossiers<br><br>Requirements<br><br>SECTION III: Performance Indicators<br><br>Evaluated Based on<br><br> Inspection accuracy and completeness Timely identification and reporting of non-conformances First-time inspection pass rate on assigned work fronts Adherence to inspection schedules/hold points Quality of inspection documentation<br><br>SECTION IV: Required Skills & Abilities <br><br>Core Competencies<br><br>Attention to Detail Integrity Analytical Thinking Communication Skills Time Management<br><br>Technical Skills<br><br> Mechanical Equipment Inspection Techniques Reading Mechanical/Equipment Drawings & Vendor Data Equipment Alignment & Grouting Inspection Inspection & Test Plans (ITPs) Measuring & Alignment Equipment Use QC Documentation & Reporting<br><br>SECTION V: Required Experience and Education <br><br>Experience<br><br> 5-8 years of experience as a QC Inspector on mechanical equipment installation projects<br><br>Education<br><br> Diploma or Bachelor's degree in Mechanical Engineering QC/inspection certification preferred

SECTION I: Job Summary <br><br>The QC Inspector - Insulation performs inspection and testing of thermal/mechanical insulation and cladding installation activities to verify compliance with drawings, specifications, and applicable standards.<br><br>SECTION II: Job Analysis <br><br>Duties & Responsibilities<br><br> Perform in-process and final inspections on insulation and cladding installation works Verify insulation material, thickness, and installation method against approved specifications Witness moisture barrier, banding, and cladding installation checks per the ITP Verify materials and batch certificates against approved specifications Record inspection results and raise Non-Conformance Reports as required Coordinate hold points and inspections with client/third-party inspectors Maintain inspection records, checklists, and daily QC reports Verify calibration status of measuring and test equipment used on site Support punch-list generation and verification of closure for insulation works Ensure work fronts comply with approved method statements and insulation standards Support preparation of quality documentation for insulation handover dossiers<br><br>Requirements<br><br>SECTION III: Performance Indicators<br><br>Evaluated Based on<br><br> Inspection accuracy and completeness Timely identification and reporting of non-conformances First-time inspection pass rate on assigned work fronts Adherence to inspection schedules/hold points Quality of inspection documentation<br><br>SECTION IV: Required Skills & Abilities <br><br>Core Competencies<br><br>Attention to Detail Integrity Analytical Thinking Communication Skills Time Management<br><br>Technical Skills<br><br> Insulation & Cladding Inspection Techniques Insulation Material & Thickness Verification Weatherproofing/Cladding Installation Standards Inspection & Test Plans (ITPs) Measuring & Testing Equipment Use QC Documentation & Reporting<br><br>SECTION V: Required Experience and Education <br><br>Experience<br><br> 5-8 years of experience as a QC Inspector on insulation/cladding application projects<br><br>Education<br><br> Diploma or Bachelor's degree in Mechanical Engineering QC/inspection certification preferred

SECTION I: Job Summary <br><br>The QC Inspector - Piping (UG) performs inspection and testing of underground piping installation activities, including trenching, bedding, coating, and backfill, to verify compliance with drawings, specifications, and applicable codes.<br><br>SECTION II: Job Analysis <br><br>Duties & Responsibilities<br><br> Perform in-process and final inspections on underground piping installation works Witness trench excavation, pipe bedding, coating/wrapping, and backfill activities per the ITP Verify underground pipe alignment, depth, and joint integrity against approved drawings Witness hydrotests, holiday testing (coating integrity), and cathodic protection checks as required Verify materials (pipe, coating, bedding material) against material certificates and specifications Record inspection results and raise Non-Conformance Reports as required Coordinate hold points and inspections with client/third-party inspectors prior to backfill Maintain inspection records, checklists, and daily QC reports Verify calibration status of measuring and test equipment used on site Support punch-list generation and verification of closure for underground piping works Support preparation of quality documentation for underground piping handover dossiers<br><br>Requirements<br><br>SECTION III: Performance Indicators<br><br>Evaluated Based on<br><br> Inspection accuracy and completeness Timely identification and reporting of non-conformances Hold point compliance prior to backfill Adherence to inspection schedules Quality of inspection documentation<br><br>SECTION IV: Required Skills & Abilities <br><br>Core Competencies<br><br>Attention to Detail Integrity Analytical Thinking Communication Skills Time Management<br><br>Technical Skills<br><br> Underground Piping Inspection Techniques Trenching, Bedding & Backfill Inspection Coating/Wrapping & Holiday Testing Inspection & Test Plans (ITPs) Measuring & Testing Equipment Use QC Documentation & Reporting<br><br>SECTION V: Required Experience and Education <br><br>Experience<br><br> 5-8 years of experience as a QC Inspector on underground piping/utilities construction projects<br><br>Education<br><br> Diploma or Bachelor's degree in Mechanical/Civil Engineering QC/inspection certification preferred

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ol><li><p>Supervise all warehousing activities and ensure operational efficiency.</p></li><li><p>Ensure compliance with safety procedures and oversee safety implementation on site.</p></li><li><p>Coordinate and monitor the receipt, order, assembly, and dispatch of goods.</p></li><li><p>Ensure proper documentation and recordkeeping in accordance with company standards.</p></li><li><p>Lead and train warehouse staff to ensure productivity and compliance with company policies.</p></li><li><p>Maintain communication between warehouse teams and management to report progress and issues.<br> </p></li></ol></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>University degree in the supply chain specialty or one of the engineering branches (electrical, mechanical, or equivalent).</p></li><li><p>Ability to work both inside and outside office environments.</p></li><li><p>Proficiency in English and Arabic languages.</p></li><li><p>Strong computer skills and experience with programs related to warehouse operations.</p></li><li><p>Must have an approved certificate in the field of safety.</p></li><li><p>Minimum of 5 years of experience.</p></li><li><p>Proficiency in the English and Arabic languages.</p></li></ul><p></p></section>

<h3 >About TASNEE</h3> <p >TASNEE is seeking a dedicated <strong >Technician VI Instrument</strong> to join its operations. This full-time role is based in <strong >Jubail, Eastern, Saudi Arabia</strong>, contributing to the maintenance and reliability of critical instrumentation systems.</p> <h3 >Role Summary</h3> <p >The Instrument Technician is primarily responsible for executing preventive maintenance (PM) and corrective maintenance (CM) activities for instrument equipment. This position requires a strong foundation in instrumentation skills, focusing on effective troubleshooting and maintenance practices to ensure operational continuity.</p> <h3 >Key Responsibilities</h3> <ul > <li >Perform preventive maintenance on instrument equipment.</li> <li >Issue and close work permits in accordance with operational procedures.</li> <li >Conduct troubleshooting and repair of instrument equipment.</li> <li >Utilize SAP for closing and updating assigned work orders.</li> <li >Assume leadership tasks at a lead technician level when required.</li> <li >Adhere to Health, Safety, and Environment (HSE) regulations and guidelines to ensure a safe working environment.</li> <li >Review and contribute to the improvement of preventive maintenance procedures for all assigned equipment.</li> </ul> <h3 >Technical Competencies</h3> <ul > <li >Proficiency in instrumentation skills related to preventive maintenance and troubleshooting.</li> <li >Experience with hard communicator or transmitter calibration.</li> <li >Knowledge of Safety Instrumented Level (SIL) testing.</li> <li >Familiarity with Programmable Logic Controllers (PLC).</li> </ul> <h3 >Experience Requirements</h3> <p >Candidates must possess <strong >2-5 years of relevant experience</strong> in an instrumentation role, demonstrating proficiency in the duties and technical competencies outlined above.</p> <h3 >Work Location</h3> <p >This full-time position is based in <strong >Jubail, Eastern, Saudi Arabia</strong>. The role operates within an environment that prioritizes adherence to strict HSE standards to maintain safety and efficiency.</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ol><li><p>Key Responsibilities </p><p>1. Estimation &amp; Tendering</p><ul><li><p>Study, analyse, and interpret tender documents, drawings, BOQs, and technical specifications.</p></li><li><p>Prepare detailed and accurate cost estimates covering manpower, materials, equipment, subcontracting, overheads, and margins.</p></li><li><p>Identify project scope, risks, assumptions, and exclusions during estimation.</p></li><li><p>Obtain and evaluate quotations from suppliers and subcontractors.</p></li><li><p>Conduct site visits when required for scope verification and risk assessment.</p></li><li><p>Prepare and submit technical and commercial proposals within defined deadlines.</p></li><li><p>Support Business Development with budgetary and preliminary estimates for new opportunities.</p></li><li><p>Maintain and update databases for standard rates, productivity norms, and historical cost data.</p></li></ul><p>B. Planning &amp; Scheduling</p><ul><li><p>Develop detailed project schedules (baseline and revisions) covering mobilization, execution, shutdown, and demobilization phases.</p></li><li><p>Prepare manpower loading plans, equipment deployment schedules, and</p></li></ul><p>material planning inputs.</p><ul><li><p>Coordinate with Project Managers, site teams, procurement, and operations for effective resource planning.</p></li><li><p>Prepare and update look-ahead schedules in line with client and site requirements.</p></li><li><p>Develop and maintain S-curves, resource histograms, and progress charts for management review.</p></li><li><p>Monitor actual progress against planned schedules and identify delays, constraints, and recovery measures.</p></li></ul><p>C. Project Control &amp; Reporting</p><ul><li><p>Track daily manpower, equipment utilization, and productivity.</p></li><li><p>Ensure timely submission of daily, weekly, and monthly progress reports to clients and management.</p></li><li><p>Support cost control, forecasting, and cash flow planning through integration of planning and budget data.</p></li><li><p>Participate in shutdown readiness reviews, coordination meetings, and project debriefs.</p></li><li><p>Prepare planning documentation and lessons-learned reports upon project completion.</p></li></ul><p>D. Coordination &amp; Support</p><ul><li><p>Coordinate with clients for progress updates, planning reviews, and reporting as per contractual requirements.</p></li><li><p>Work closely with estimation, execution, and procurement teams to exchange data and improve future tender accuracy.</p></li><li><p>Ensure compliance with company procedures, contractual requirements, and HSE standards.</p></li></ul></li></ol></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>Hands-on experience in SABIC / ARAMCO projects, including shutdowns, chemical cleaning, hydro jetting, and mechanical maintenance.</p></li><li><p>Strong understanding of maintenance, and turnaround scopes.</p></li><li><p>Proficiency in Primavera P6, MS Project, MS Excel, and estimation / ERP systems.</p></li><li><p>Familiar with international standards and industrial safety practices in oil &amp; gas.</p></li><li><p>Middle East experience, particularly in Saudi Arabia, is an advantage.</p></li><li><p>Strong analytical and problem-solving skills with high attention to detail.</p></li><li><p>Good communication and coordination skills with multi-disciplinary teams.</p></li><li><p>Ability to work under pressure and meet tight deadlines, especially during shutdowns.</p></li><li><p>Familiarity with P&amp;ID, isometric drawings, and plant maintenance processes.</p><ul><li><p>Bachelor’s Degree in Mechanical / Industrial Engineering or related discipline.</p></li><li><p>Minimum 5 years of relevant experience in planning and estimation within industrial services, maintenance, shutdown, and oil &amp; gas sectors.</p></li></ul></li></ul><p></p></section>

<h3 >Company Overview and Role Introduction</h3> <p >Nama Chemicals Co., located in Al Jubail, is seeking a dedicated and skilled <strong >Instrument Technician</strong> for a full-time position. This role is central to ensuring the safe and efficient operation of the plant by leading and executing all daily instrument maintenance activities. The Instrument Technician will be responsible for troubleshooting, problem resolution, installation, and repair across a wide range of industrial instrumentation and control systems.</p> <h3 >Role Purpose and Scope</h3> <p >The Instrument Technician plays a critical role in maintaining the operational integrity of Nama Chemicals Co.'s diverse production facilities. This involves hands-on work with industrial instrumentation, process analyzers, Distributed Control Systems (DCS), Programmable Logic Controllers (PLCs), Fire &amp; Gas (F&amp;G) systems, compressor and centrifuge controls, boiler and burner control systems, and bagging machines. These systems support the production of various chemicals, including Chlor Alkali, Calcium chloride, Epichlorohydrin, Ally Alcohol, Utility Vendor Packages, Epoxy Plants, and Caustic Prilling Units.</p> <h3 >Key Responsibilities</h3> <ul > <li >Comply with Nama policies and safety procedures, contributing to target SHE rates and NAMA ISO certified quality standards.</li> <li >Perform daily maintenance activities according to Standard Maintenance Procedures, ensuring high quality, reasonable timeframes, and proper record-keeping and housekeeping.</li> <li >Provide timely feedback to supervisors on any findings or abnormalities.</li> <li >Act as a supervisor during their absence, preparing and submitting required reports.</li> <li >Respond to operation and maintenance activities (normal and emergency cases) and attend on-call if assigned.</li> <li >Attend all on-job and classroom training sessions.</li> <li >Work and troubleshoot independently due to the diverse nature of the work.</li> <li >Demonstrate proficiency in troubleshooting PLC software, DCS, Boiler Control System, and Burner Management System.</li> <li >Acquire and maintain required certifications.</li> <li >Support the supervisor in creating periodic spare parts reviews.</li> <li >Plan for Shutdown activities job lists.</li> <li >Maintain, repair, and calibrate field instruments such as Temperature Transmitters, various types of Pressure Transmitters, Level Transmitters, load cells, pH, Conductivity, and ORP sensors and their transmitters.</li> <li >Maintain, repair, and calibrate process analyzers including ECH GC, various O2 Analyzers, Propylene Analyzer, Moisture Analyzer, CO Analyzer, HCL Analyzers, free Chlorine Analyzers, and AAL GC.</li> <li >Follow up on analyzer PM schedules.</li> <li >Possess maintenance knowledge of various types of flowmeters (DP, Coriolis, electromagnetic, Vortex, etc.).</li> <li >Perform PM/servicing for all types of control valves and on-off valves (globe, butterfly, ball, diaphragm valves) and their related parts (solenoid valves, positioners, limit switches).</li> <li >Maintain, repair, and calibrate vendor packages such as bagging machines, drumming machines, weighbridges, and weighers.</li> <li >Maintain, repair, and calibrate different types of Gas Detectors installed in the plant.</li> <li >Be proficient in handling various instrument tools like Beamex Calibrators and HART communicators (375/475/4100).</li> <li >Lay out, install, and place into service new controlling and instrument devices, calibrating as required.</li> <li >Conduct periodic preventative maintenance inspections of all control instruments, diagnosing existing or potential trouble; clean, lubricate, calibrate, and adjust as conditions indicate.</li> <li >Prepare scope of work for new site jobs.</li> </ul> <h3 >Qualifications and Experience</h3> <ul > <li >3 Years Diploma in Process Instrumentation and Control from a reputed college/university.</li> <li >Vocational Training/Industrial Training Institute background.</li> </ul> <h3 >Required Skills and Knowledge</h3> <ul > <li >Excellent knowledge of Instrumentation and independent troubleshooting.</li> <li >Basic knowledge of DCS and troubleshooting.</li> <li >Excellent knowledge of Programmable Logic Controllers and their troubleshooting.</li> <li >Good troubleshooting knowledge of Analyzers, including basic GC operation and troubleshooting.</li> <li >Computer knowledge and ability to create Purchase Requisitions (PR) in the SAP system.</li> <li >Ability to lead a small team.</li> <li >Knowledge of Industrial safety procedures and standards, including experience in confined space, hot works, working on heights, and energy isolation requirements.</li> <li >Knowledgeable in hazard identification related to environmental aspects and personal safety.</li> <li >Strong ability to perform risk assessments before obtaining permits and to implement mitigation steps during the job (*, PPE requirements, process isolation).</li> <li >Fully aware of Plant EHS requirements for safe task execution.</li> </ul>

<h3 >About Tasnee and the Role</h3> <p >Tasnee, a prominent company in Saudi Arabia with over 4,000 employees, is seeking a <strong >Technician VI, Instrument Job</strong> to join its team in Al Jubail. This is a full-time position critical to maintaining the operational integrity of instrumentation systems. Tasnee is committed to fostering an environment where employee contributions are valued, supporting career development and professional growth within a sustainable business framework.</p> <h3 >Role Overview</h3> <p >The Instrument Technician VI is responsible for executing both preventive maintenance (PM) and corrective maintenance (CM) activities for instrument equipment. This role requires strong proficiency in instrumentation skills, particularly in preventive maintenance practices and effective troubleshooting to ensure reliable plant operations.</p> <h3 >Key Responsibilities</h3> <ul > <li >Perform preventive maintenance on various instrument equipment.</li> <li >Issue and close work permits in accordance with operational procedures.</li> <li >Troubleshoot and repair instrument equipment to minimize downtime.</li> <li >Adhere strictly to Health, Safety, and Environment (HSE) regulations and guidelines to maintain a safe working environment.</li> <li >Review preventive maintenance procedures for all assigned equipment, suggesting improvements where necessary.</li> <li >Utilize hard communicators for transmitter calibration.</li> <li >Undertake leadership tasks as a lead technician when required.</li> </ul> <h3 >Required Skills and Technical Knowledge</h3> <ul > <li >Proficiency in instrumentation skills, including preventive maintenance and troubleshooting techniques.</li> <li >Working knowledge of SAP for closing and updating assigned work orders.</li> <li >Familiarity with Safety Instrumented Systems (SIL) testing.</li> <li >Knowledge of Programmable Logic Controllers (PLC).</li> </ul> <h3 >Qualifications and Experience</h3> <ul > <li >A Diploma in Instrument Technology or an equivalent qualification.</li> <li >A minimum of 6 years of experience as an Instrument Technician within the Petrochemical or Oil &amp; Gas sectors.</li> </ul> <h3 >Work Environment</h3> <p >This full-time position is based in Al Jubail, Saudi Arabia, operating within a dynamic industrial setting. The successful candidate will contribute to a team focused on maintaining high standards of operational reliability and safety.</p>

<h3 >About the Opportunity</h3> <p >Tasnee (National Industrialization Co.) is seeking a dedicated <strong >Technician VI, Instrument</strong> to join their team in Al Jubail. This full-time role focuses on ensuring the reliable operation of instrumentation through effective preventive and corrective maintenance activities within the petrochemical or oil &amp; gas sectors.</p> <h3 >Role Overview</h3> <p >The Instrument Technician VI is primarily responsible for executing Instrument Preventive Maintenance (PM) and Corrective Maintenance (CM) activities. The successful candidate will apply strong instrumentation skills in both preventive maintenance and troubleshooting to maintain operational efficiency and safety standards, contributing to the overall integrity of plant operations.</p> <h3 >Key Responsibilities</h3> <ul > <li >Perform preventive maintenance on instrument equipment according to schedules and procedures.</li> <li >Issue and close work permits in compliance with established safety protocols.</li> <li >Troubleshoot and repair instrument equipment to diagnose and resolve operational issues.</li> <li >Utilize SAP for closing and updating assigned work orders accurately and efficiently.</li> <li >Undertake leadership tasks at a lead technician level when required, guiding junior team members.</li> <li >Adhere strictly to Health, Safety, and Environment (HSE) regulations and guidelines to ensure a safe working environment.</li> <li >Review preventive maintenance procedures for all assigned equipment to ensure their effectiveness and relevance.</li> <li >Execute hard communicator or transmitter calibration tasks with precision.</li> <li >Demonstrate knowledge in Safety Integrity Level (SIL) testing.</li> <li >Apply knowledge of Programmable Logic Controllers (PLC) in daily tasks.</li> </ul> <h3 >Qualifications and Experience</h3> <ul > <li >A Diploma in Instrument or an equivalent qualification is required.</li> <li >Minimum of <strong >6 years’ experience</strong> or above working as an Instrument Technician in the Petrochemical or Oil &amp; Gas sectors.</li> </ul> <h3 >Essential Skills</h3> <ul > <li >Strong technical and troubleshooting skills in instrumentation and control systems.</li> <li >High attention to safety, quality, and compliance standards in all work activities.</li> <li >Effective teamwork and communication abilities to collaborate with colleagues and other departments.</li> <li >Ability to work under pressure and consistently complete tasks to a high standard.</li> <li >Strong problem-solving and analytical thinking capabilities to address complex technical challenges.</li> </ul> <h3 >Work Environment</h3> <p >This is a full-time position based in Al Jubail, offering an opportunity to contribute to critical industrial operations within a structured and safety-focused environment at Tasnee.</p>

<p>We are seeking an experienced Business Development Manager to join our team.&nbsp;</p><p>The ideal candidate will be responsible for identifying new business opportunities, strengthening client relationships, managing prequalification processes, and driving business growth across government and private sectors.</p><p>&nbsp;</p><p><strong>Key Responsibilities:</strong></p><p>• Identify and develop new business opportunities to achieve company growth objectives</p><p>• Build and maintain strong relationships with clients, consultants, and strategic partners</p><p>• Manage company registrations and vendor onboarding through SAP Ariba and Etimad platforms</p><p>• Prepare, submit, and maintain client prequalification documents and vendor registrations</p><p>• Monitor upcoming tenders and business opportunities in government and private sectors</p><p>• Coordinate with internal departments to support proposal and bid preparation</p><p>• Develop and implement business development strategies to expand the company's market presence&nbsp;</p><p>&nbsp;</p><p><strong>Requirements</strong>:</p><p>• Bachelor's degree in Business Administration, Marketing, or a related field</p><p>• Minimum 10+ years of experience in Business Development, preferably within the Oil &amp; Gas sector</p><p>• Hands-on experience with SAP Ariba and Etimad platforms&nbsp;</p><p>• Proven experience in managing prequalification submissions and vendor registration processes</p><p>• Excellent negotiation, communication, and relationship management skills</p><p>• Proficiency in MS Office and CRM/business development tools</p><p>• Fluent in English and Arabic</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The Senior Accountant is responsible for overseeing day-to-day accounting operations, ensuring accurate and timely recording of financial transactions, compliance with IFRS, Saudi tax and statutory regulations, and effective financial controls. The role supports the Finance Manager by supervising accounting activities, maintaining accurate financial records, monitoring project costs, and contributing to efficient financial reporting and audit processes. </p><br><p>Minimum knowledge and understanding of IFRS, VAT, WHT and local regulations and compliance. </p><br><p> Processing the payments related to Suppliers and petty cash Responsible for the accounting of all cost/expenses in the ERP system. Make sure all expenses and payments booked as per the Department cost center, projects. Project costing – all components of costs in the projects are verifying and posting to the system and keeping all supporting documents. Verifying payroll &amp; employees benefits and related provisions. Inventory and its movement and costing Support to Estimation Department in SABIC / ARAMCO audit conducting. Responsible for fixed assets’ acquisition, depreciation, and dispersal. Maintaining records of prepaid and accruals schedules and periodic charges. Accuracy of project costing and profitability and concerned report. Supervising the annual physical inventory and submit the report to Finance Manager and coordinate with Auditor. Coordinate accounts team. Coordination with external auditors Local content and Iktva data submission Perform any other assignments given by Finance Manager. </p><br><p>Must be able to read, write and speak proficient in English Moderate skills in Arabic are an added advantage</p><br><p>Very good with MS Excel, ERP systems.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p> Bachelor's Degree in Commerce, Accounting, or Finance (B. Com) CMA qualification preferred MBA in Finance is an added advantage </p><p></p></section>

<h3 >About PaxOcean</h3> <p >PaxOcean is a prominent company operating in Al Jubayl, Saudi Arabia, dedicated to its operational excellence. The organization is currently seeking a diligent and organized individual to join its team as an <strong >Officer Administration</strong>. This full-time position is integral to supporting the company's daily functions and ensuring a well-managed administrative environment.</p> <h3 >The Role of Officer Administration</h3> <p >The Officer Administration will be responsible for providing comprehensive administrative support to ensure the smooth and effective functioning of office operations. This role involves managing day-to-day clerical tasks, facilitating internal coordination, and assisting with critical documentation and reporting requirements to maintain an efficient workflow.</p> <h3 >Key Responsibilities</h3> <ul > <li >Manage general office administration tasks, including meticulous filing, scanning, and maintaining accurate records.</li> <li >Assist in the preparation of reports, correspondence, and various basic documentation.</li> <li >Support team members by coordinating and scheduling meetings, appointments, and travel arrangements.</li> <li >Oversee office supplies inventory and ensure the office environment remains organized and functional.</li> <li >Liaise and coordinate effectively with internal departments to ensure seamless workflow and communication.</li> <li >Perform additional administrative duties as assigned to support overall office efficiency.</li> </ul> <h3 >Required Qualifications and Experience</h3> <p >Candidates applying for the Officer Administration role should have 0-1 years of professional experience in an administrative support capacity. A strong aptitude for organization, meticulous attention to detail, and effective communication skills are essential. The ability to manage various administrative tasks efficiently and contribute positively to a dynamic work environment is highly valued.</p> <h3 >Work Environment</h3> <p >This is a <strong >full-time</strong> position based in <strong >Al Jubayl, Saudi Arabia</strong>. The successful candidate will work within a supportive team environment, contributing directly to the operational efficiency of PaxOcean and its administrative functions.</p> <h3 >Application Process</h3> <p >Interested candidates are invited to submit their application for this Officer Administration role. PaxOcean is committed to building a skilled and dedicated team that upholds its standards of operational excellence.</p>

<div dir="rtl"><h3 >About Cipher</h3> <p >Cipher (سايڤر) is a dedicated cybersecurity firm committed to enhancing digital resilience and security. We are currently seeking a highly skilled <strong >Cybersecurity Compliance Specialist</strong> to join our team in Al Jubail, located in the Eastern region of Saudi Arabia.</p> <h3 >The Role</h3> <p >The <strong >Cybersecurity Compliance Specialist</strong> will play a crucial role in maintaining and strengthening our cybersecurity posture. This position involves actively supporting compliance, governance, and audit activities, ensuring that all operations align rigorously with established national and international cybersecurity frameworks and standards. Key frameworks include NCA ECC and ISO/IEC 27001, which are central to our operational integrity.</p> <h3 >Key Responsibilities</h3> <ul > <li >Conduct compliance assessments against NCA ECC and ISO/IEC 27001 standards.</li> <li >Perform technical compliance and configuration reviews of systems and infrastructure.</li> <li >Assess systems against industry-recognized CIS Benchmarks.</li> <li >Maintain comprehensive compliance documentation and manage Non-Compliance Registers.</li> <li >Support various PCI compliance initiatives and related activities.</li> <li >Prepare detailed compliance reports and provide support during audit processes.</li> </ul> <h3 >Required Experience</h3> <p >Candidates applying for this specialist position are expected to have a strong background in cybersecurity compliance, with <strong >5 to 10 years of relevant professional experience</strong>. This experience should demonstrate a proven ability to manage and execute compliance-related tasks effectively within complex environments.</p> <h3 >Work Type and Location</h3> <p >This is a <strong >full-time employment opportunity</strong>. The successful candidate will be based at our facilities in Al Jubail, a key industrial city within the Eastern region, contributing directly to our local operations.</p> <h3 >Application Details</h3> <p >Further details regarding the application process and compensation will be discussed directly with qualified candidates.</p></div>

<h3 >About the Role</h3> <p >ENGIE Middle East is seeking a dedicated Shift Engineer to join our team in Al Jubail. This full-time role requires 5-10 years of experience and involves leading the operations shift team to ensure safe and efficient plant operations. The Shift Engineer will be responsible for making accurate and timely decisions regarding plant processes and performance, consulting with the Operations Manager as needed. The position demands a detailed understanding and practical experience with technologies used in modern process plants for power generation and desalinated water production.</p> <h3 >Operational Responsibilities</h3> <ul > <li >Provide focused leadership to the shift team to achieve plant performance targets and ensure optimum levels of power and water export as required by the off-taker.</li> <li >Coordinate effectively among the operations and maintenance teams for routine, preventive, and predictive maintenance requirements.</li> <li >Ensure operations shifts are adequately staffed and that necessary resources are available for the team to operate the Cogen plant safely, reliably, and efficiently.</li> <li >Monitor the quality and actions taken on defects and work orders.</li> <li >Continuously monitor and analyze equipment operating parameters to predict abnormal conditions early and initiate appropriate action to prevent unscheduled unit or equipment outages.</li> <li >Oversee chemical processes, sampling, and water plant control to maintain quality standards, environmental compliance, and safety.</li> <li >Raise work orders in the system to report plant defects and follow up on their progress.</li> <li >Coordinate with the Senior Shift Engineer and maintenance team to schedule planned and unplanned maintenance activities.</li> <li >Prepare and issue safety documentation to ensure safe isolations from the system for planned and unplanned maintenance activities.</li> <li >Coordinate and maintain strong liaison with Power, Gas, Sea Water &amp; Water Control Centers regarding Availability Declarations and Requirements Planning.</li> </ul> <h3 >Safety, Quality, and Environmental Compliance</h3> <ul > <li >Responsible for the Safety Management and Environment Management System where applicable.</li> <li >Ensure IMS Compliance and Certification.</li> <li >Implement and adhere to all operations-related policies and procedures.</li> <li >Prepare safety documents according to JOMEL safety rules standard and be conversant with the Permit to Work (PTW) system.</li> <li >Ensure all activities are carried out according to predefined Standard Operating Procedures (SOPs) and instructions.</li> <li >Ensure the shift team is aware of and trained on any revisions or updates to SOPs or instructions.</li> </ul> <h3 >Team Leadership and Development</h3> <ul > <li >Maintain high standards of management, ethics, and leadership within the team.</li> <li >Establish and facilitate training programs for individual development and operational competence.</li> <li >Lead the implementation of the performance management process by setting objectives and targets for individuals and conducting periodical reviews.</li> <li >Provide support to individuals in achieving set targets whenever necessary.</li> <li >Implement lessons learned processes and other activities to foster a learning organization culture.</li> <li >Ensure succession planning for key staff members.</li> <li >Establish and implement vertical and horizontal communication within the shift team to ensure members are well-informed and engaged with the business.</li> <li >Act as a subject matter expert in specialized areas of the plant and deliver training to staff when required.</li> </ul> <h3 >Qualifications and Experience</h3> <p >Candidates for the Shift Engineer position should possess 5-10 years of relevant experience. The role requires a detailed understanding and practical experience of technologies involved in operating modern process plants associated with power generation and the production of desalinated water. Essential skills include <strong >excellent communication and leadership abilities</strong>, along with the capacity to work under one's own initiative with a high level of drive, energy, and motivation.</p> <h3 >Reporting Structure and Accountabilities</h3> <p >The Shift Engineer operates under the general guidance of the Senior Shift Engineer and is empowered to plan and manage their areas of activity within predefined limits. Extraordinary issues outside established policy and procedure are to be referred to the Senior Shift Engineer for approval or further action plans. Key accountabilities for this role include:</p> <ul > <li >Ensuring smooth running of Shift Operations.</li> <li >Compliance with HSE (Audit &amp; Procedural Compliance).</li> <li >Adherence to ISO Standards (Audit &amp; Procedural Compliance).</li> <li >Achieving Plant Operations Targets.</li> <li >Maintaining the Quality of Reports and the Reporting System for all operations-related reports.</li> </ul>

<h3 >About KBR Saudi Arabia</h3> <p >KBR Saudi Arabia is recognized as a company of innovators, thinkers, and creators, dedicated to improving the world responsibly and safely. We attract a diverse workforce and leading minds globally, fostering an environment where expertise thrives on creativity, resourcefulness, and collaboration.</p> <h3 >The Role</h3> <p >KBR Saudi Arabia is seeking a <strong >Contracts Administrator</strong> to join our team in Al Jubail. This full-time position is critical for ensuring the effective management and compliance of contractual agreements within our operations. The role requires 2-5 years of experience in contracts administration.</p> <h3 >Key Responsibilities</h3> <ul > <li >Prepare, edit, and review contract documents to ensure clarity, accuracy, and compliance with company policies and legal requirements.</li> <li >Monitor compliance to ensure all parties fulfill their contractual obligations in line with agreed terms, timelines, and regulations.</li> <li >Maintain an organized repository of contracts and related correspondence for effective documentation management.</li> <li >Liaise with project managers, procurement, finance, and legal teams to ensure smooth contract execution and stakeholder coordination.</li> </ul> <h3 >Required Technical Skills and Experience</h3> <ul > <li >Strong attention to detail, particularly for reviewing legal and financial terms.</li> <li >Proficiency in contract management systems and MS Office tools.</li> <li >Experience in supervising and coordinating bidding processes for maintenance activities.</li> <li >Demonstrated experience in contracts administration, cost and budget control, and SAP knowledge.</li> </ul> <h3 >Essential Attributes</h3> <ul > <li >Well-organized and proactive with excellent communication skills.</li> <li >Proven leadership skills within large organizations.</li> <li >Maturity of judgment under pressure and the ability to resolve problems effectively.</li> <li >Strategic thinking and openness to new ideas.</li> </ul> <h3 >Working at KBR Saudi Arabia</h3> <p >This role operates within KBR Saudi Arabia's multi-cultural environment, where the ability to achieve business results through collaboration and diverse perspectives is valued. The company is committed to responsible and safe operations globally.</p>