وظائف مفتش أمن - جدة السعودية

نظرة عامة على الوظيفة<br>نحن نبحث عن متخصص ذي خبرة في جدران الحماية وأمن الشبكات لدعم مشروع أمن سيبراني مؤسسي كبير يغطي تقييم جدران الحماية، وتقسيم الشبكات، ومصفوفة الاتصال، وتطوير سياسات جدران الحماية، والترحيل إلى منصة Palo Alto Panorama.<br><br>المسؤوليات الرئيسية<br>مراجعة وتحسين تكوينات جدران الحماية عبر البيئات المحلية (On-Premises)، وبيئات التقنيات التشغيلية/أنظمة التحكم الصناعي (OT/ICS)، والبيئات السحابية.<br>تدقيق قواعد جدار الحماية وتحديد القواعد المتقادمة والمتكررة والمفرطة في السماح وغير المصرح بها.<br>تقييم تقسيم الشبكة وقوائم التحكم في الوصول (ACLs) وتطبيق مبادئ الحد الأدنى من الامتيازات / المنع الافتراضي.<br>تطوير وصيانة مصفوفة اتصال شاملة تغطي المصدر، والوجهة، والتطبيق، والمنافذ، والبروتوكولات، والتبرير، والإصدار، والموافقة.<br>ترجمة متطلبات الاتصال المعتمدة إلى سياسات جدار حماية منظمة.<br>مراجعة وتوثيق تدفقات حركة المرور الواردة/الصادرة والخدمات المصرح بها.<br>تنفيذ الترحيل إلى Palo Alto Panorama، بما في ذلك دمج جدار الحماية، وترحيل السياسات/الكائنات، ومجموعات الأجهزة (Device Groups)، والقوالب، والتحقق، والاختبار، والتنفيذ الفعلي، وخطط التراجع.<br>دمج سجلات جدار الحماية مع نظام إدارة الأحداث والمعلومات الأمنية (SIEM) والتحقق من المراقبة الأمنية.<br>إعداد وثائق جدار الحماية، وتقسيم الشبكة، ومصفوفة الاتصال، وخطة الترحيل إلى Panorama.<br>التنسيق مع فرق الشبكات، والبنية التحتية، والتطبيقات، ومركز العمليات الأمنية (SOC)، وأمن المعلومات، وهندسة الأمن السيبراني.<br>عرض النتائج والحصول على الموافقات المطلوبة من أصحاب المصلحة وهندسة الأمن السيبراني.<br>ضمان الامتثال لمعايير الهيئة الوطنية للأمن السيبراني (NCA)، ومعيار ISO 27001، وNIST، ومعايير الأمن ذات الصلة.<br><br>المتطلبات<br>7 سنوات فأكثر من الخبرة في أمن الشبكات / هندسة جدران الحماية.<br>خبرة عملية قوية في جدران حماية Palo Alto ومنصة Panorama.<br>خبرة مثبتة في الترحيل إلى Panorama والإدارة المركزية لجدران الحماية.<br>معرفة قوية بسياسات جدران الحماية، وNAT، وقوائم التحكم في الوصول (ACLs)، وتقسيم الشبكات، وبروتوكولات TCP/IP، والتوجيه.<br>خبرة في البيئات المؤسسية المحلية (On-Prem)، والسحابية، ويفضل في بيئات OT/ICS.<br>خبرة في تكامل SIEM والمراقبة الأمنية.<br>مهارات قوية في التوثيق وإدارة أصحاب المصلحة.<br>يفضل الحصول على شهادات ذات صلة مثل PCNSE، أو CCNP Security، أو CISSP، أو ما يعادلها.<br>التواجد الفعلي في المملكة العربية السعودية إلزامي.<br>يجب على المرشحين الامتثال لجميع سياسات وإجراءات تكنولوجيا المعلومات وأمن المعلومات الخاصة بالعميل.<br>المخرجات الرئيسية<br>تقييم جدار الحماية وتحسين القواعد<br>تقييم تقسيم الشبكة<br>مصفوفة الاتصال – ملفات XLSX/CSV<br>سياسة جدار الحماية<br>خطة ودليل إجراءات الترحيل إلى Palo Alto Panorama<br>تقرير التحقق من الترحيل<br>تكامل SIEM<br>حزمة مراجعة هندسة الأمن<br>وثائق النظام النهائي كما تم تنفيذها (As-Built)<br>موافقة وتوقيع أصحاب المصلحة

ملخص الوظيفة<br><br>يتولى مدير الأمن والتهديدات قيادة حوكمة العمليات الأمنية وإدارة التهديدات عبر قرى عمال القدية.<br><br>الغرض الرئيسي من الدور<br><br>منع التهديدات الأمنية، واكتشافها، والاستجابة لها من خلال حوكمة أمنية منضبطة وجاهزية للطوارئ.<br><br>المسؤوليات الرئيسية<br><br> تطوير وتنفيذ أطر عمل الأمن وإدارة التهديدات، الإشراف على التحكم في الوصول، والدوريات، وعمليات الدوائر التلفزيونية المغلقة (CCTV)، قيادة تقييمات التهديدات وتحليل نقاط الضعف، تنسيق المعلومات الاستخباراتية وتنبيهات التهديدات مع السلطات، التحقيق في الحوادث الأمنية وتنفيذ الإجراءات التصحيحية، ضمان الامتثال للوائح الأمنية السعودية، الحفاظ على الامتثال للتدريب والتراخيص.<br><br>المخرجات والمسؤوليات الرئيسية<br><br> أطر عمل أمنية وتهديدات معتمدة، سجلات وتقييمات مخاطر التهديدات، تقارير التحقيق في الحوادث، خطط الاستجابة للطوارئ والأزمات، لوحات معلومات وتقارير مؤشرات الأداء الرئيسية الأمنية.<br><br>مؤشرات الأداء الرئيسية<br><br> معدل الحوادث الأمنية ووقت الاستجابة، معدل إنجاز تقييم التهديدات، معدل الامتثال للتحكم في الوصول، معدل الامتثال للتدريب والتراخيص، معدل عدم المطابقة في التدقيق.<br><br>المتطلبات<br><br>متطلبات الخبرة<br><br> خبرة لا تقل عن 8 سنوات في إدارة الأمن والتهديدات، خبرة لا تقل عن 3 سنوات في دور إداري.<br><br>الكفاءات الفنية والمهنية<br><br> حوكمة الأمن وتطوير إجراءات التشغيل القياسية (SOPs)، تقييم التهديدات وتحليل نقاط الضعف، أنظمة التحكم في الوصول والمراقبة، التحقيق في الحوادث والاستجابة للأزمات، إدارة أداء المقاولين.<br><br>الكفاءات السلوكية<br><br> القيادة والمساءلة، إشراك أصحاب المصلحة والتعاون، اتخاذ القرار تحت الضغط، النزاهة والمهنية، عقلية التحسين المستمر.<br><br>حدود السلطة وصنع القرار<br><br> إيقاف الممارسات الأمنية غير الآمنة أو غير المتوافقة، تصعيد التهديدات الموثوقة إلى القيادة والسلطات، اعتماد خطط العمل الأمنية التصحيحية.

نبذة عن الوظيفة<br>نحن نبحث عن مفتش ميكانيكي مؤهل للانضمام إلى فريق إدارة المشاريع والإنشاءات لدينا لبرنامج طرق رئيسي في المملكة العربية السعودية. يقع هذا الدور ضمن قسم البنية التحتية لدينا وهو ضروري لضمان تنفيذ جميع الأعمال الميكانيكية، لا سيما تلك المتعلقة بالمرافق ومحطات الضخ والمعدات الميكانيكية والبنية التحتية المرتبطة بها، وفقاً للمعايير المطلوبة للجودة والسلامة والامتثال. بصفتك مفتشاً ميكانيكياً، ستقوم بالإشراف على التركيبات الميكانيكية للمقاولين في الموقع وفحصها، والتحقق من الامتثال للرسومات والمواصفات المعتمدة، ودعم فريق المشروع في تقديم خدمات إشراف على البناء عالية الجودة.<br>المسؤوليات الرئيسية: الوصف الرئيسي للمنصب الوظيفي: إجراء عمليات تفتيش يومية للأعمال الميكانيكية، بما في ذلك أنظمة الأنابيب، ومحطات الضخ، والصمامات، وتركيب المعدات الميكانيكية، وأنظمة التدفئة والتهوية وتكييف الهواء (إن وجدت)، وشبكات مكافحة الحرائق، والمكونات الميكانيكية المتعلقة بالمرافق. التأكد من أن جميع المواد والمعدات وجودة العمل تتوافق مع مواصفات المشروع، والرسومات المعتمدة، والمعايير الدولية ذات الصلة. مراقبة أنشطة المقاولين لضمان الالتزام بإجراءات ضمان الجودة/مراقبة الجودة، وبيانات الطريقة المعتمدة، ومتطلبات السلامة. الإبلاغ عن حالات عدم المطابقة (NCRs)، أو المشكلات المحتملة، أو انتهاكات السلامة إلى كبار الموظفين ومتابعة الإجراءات التصحيحية. الاحتفاظ بسجلات دقيقة ومفصلة لعمليات التفتيش، وملاحظات الموقع، ونتائج الاختبارات، وأنشطة التقدم اليومية. التنسيق مع مختبر اختبار المواد ووكالات الاختبار الخارجية للتحقق من متطلبات الاختبار الميكانيكي وضمان الحصول على النتائج في الوقت المناسب. مراجعة والتحقق من طلبات التفتيش (RFIs) الخاصة بالمقاولين والمشاركة في عمليات الموافقة والقبول. دعم مهندس الميكانيكا الأول في مراجعة رسومات الورشة، وبيانات الطريقة، ومستندات المواد، والوثائق الفنية. المساعدة في التحقق من الأعمال الميكانيكية المنفذة فعلياً (As-built) ووثائق التسليم أثناء إغلاق المشروع. تعزيز التنسيق والتواصل القوي مع مفتشي التخصصات الأخرى وأصحاب المصلحة في المشروع لضمان عمليات موقع فعالة وسلسة.<br>نبذة عنك: دبلوم أو درجة البكالوريوس في الهندسة الميكانيكية، أو تكنولوجيا الميكانيكا، أو تخصص ذي صلة. خبرة لا تقل عن 7 سنوات في الإشراف على البناء، ويفضل أن تكون في البنية التحتية، أو المرافق، أو محطات الضخ، أو الأنظمة الميكانيكية ضمن مشاريع كبرى. فهم قوي للأنظمة الميكانيكية، وأعمال الأنابيب، وتركيب المعدات، ومتطلبات مراقبة الجودة. الإلمام بالمعايير الدولية مثل ASME، أو ASTM، أو API، أو NFPA، أو ما يعادلها. تعد الخبرة في العمل مع الجهات الحكومية أو مشاريع إدارة المشاريع والإنشاءات (PMCM) الكبرى في المملكة العربية السعودية ميزة إضافية. القدرة على قراءة وتفسير الرسومات الميكانيكية، ومخططات الأنابيب والأجهزة (P&IDs)، والمواصفات الفنية. اهتمام قوي بالتفاصيل، ودقة في إعداد التقارير، ومهارات حل المشكلات. إجادة اللغة الإنجليزية؛ وتعد مهارات اللغة العربية ميزة إضافية. قدرات قوية على التواصل والعمل الجماعي ضمن بيئة متعددة الثقافات.<br>نبذة عنا: نحن رابطة من المهنيين العاملين في مجالات الهندسة في مشاريع تساهم في عالم أكثر استدامة. يخلق هيكل ملكيتنا ثقافة مشاركة لتقديم أفضل خدمة للعميل، بينما يطور موظفونا أنفسهم على المستويين المهني والشخصي. لذلك، فإن أهم أصولنا هي خبرة وتجربة موظفينا. مهنيون مؤهلون وذوو مهارات عالية، متحدون بعمق، يعملون في إطار من الحرية المهنية والنزاهة، مع التزام قوي بالتقدم، والتطوير، وخدمة الجودة، والابتكار. منذ تأسيسها في عام 1957، نمت الشركة بشكل مطرد وأصبحت الآن منظمة متعددة الجنسيات ومتكاملة ومتعددة التخصصات، تضم أكثر من 4300 موظف يعملون في أكثر من 130 دولة.

Company Overview:<br>دار، العضو المؤسس في مجموعة سيدارا، هي مؤسسة استشارية دولية متعددة التخصصات تتخصص في الهندسة، المعمار، التخطيط، البيئة، إدارة المشاريع، إدارة المرافق، والاقتصاد. تعمل سيدارا في 60 دولة مع 20,500 محترف، يربط دار بين الناس والأماكن والمجتمعات من خلال حلول مبتكرة لأكثر التحديات تعقيداً في العالم. ننفذ المشاريع من البداية حتى الإنجاز، نستوعب التحديات لتمكين المجتمعات في جميع أنحاء العالم. تعرف على المزيد على www.dar.com.<br>رؤيتنا وقيمنا:<br>نطمح لأن نكون المنزل المختار لأولئك الذين لديهم موهبة صياغة الحلول التي تمكّن الناس وشغف لا يتزعزع بالتعلم والابتكار. تشكل قيمنا الأساسية ثقافتنا وتوجّه قراراتنا. نحن ملتزمون بـ:<br>التميّز المسؤولية التمكين الترابط الشجاعة<br><br>نظرة عامة على الدور:نظرة عامة على الشركة:<br>دار، العضو المؤسس في مجموعة سيدارا، هي مؤسسة استشارية دولية متعددة التخصصات تتخصص في الهندسة، المعمار، التخطيط، البيئة، إدارة المشاريع، إدارة المرافق، والاقتصاد. تعمل سيدارا في 60 دولة مع 20,500 محترف، يربط دار بين الناس والأماكن والمجتمعات من خلال حلول مبتكرة لأكثر التحديات تعقيداً في العالم. ننفذ المشاريع من البداية حتى الإنجاز، نستوعب التحديات لتمكين المجتمعات في جميع أنحاء العالم. تعرف على المزيد على www.dar.com.<br>رؤيتنا وقيمنا:<br>نطمح لأن نكون المنزل المختار لأولئك الذين لديهم موهبة صياغة الحلول التي تمكّن الناس وشغف لا يتزعزع بالتعلم والابتكار. تشكل قيمنا الأساسية ثقافتنا وتوجّه قرارتنا. نحن ملتزمون بـ:<br>التميّز المسؤولية التمكين الترابط الشجاعة<br><br>نظرة عامة على الدور:<br>سيكون مفتش الري مسؤولاً عن الإشراف والفحص لأعمال الري لضمان الامتثال للرسومات المعتمدة والمواصفات ومعايير الجودة ومتطلبات المشروع.<br>المسؤوليات الرئيسية<br>فحص شبكات الري وخطوط الأنابيب والصمامات والمضخات والضوابط والأنظمة المرتبطة بها. متابعة أعمال التركيب والتحقق من الامتثال لرسومات التصنيع والمواصفات المعتمدة. فحص المواد المسلمة إلى الموقع والتأكد من الامتثال للمناشير المعتمدة للمواد. مشاهدة الاختبارات، التنظيف، اختبارات الضغط، والتكليف لأنظمة الري. مراجعة طلبات فحص الأعمال والإبلاغ عن أي أعمال غير مطابقة. التنسيق مع المقاولين والمهندسين وفرق المناظر الطبيعية والتخصصات الأخرى. ضمان اكتمال أعمال الري وفقاً لبيانات الطريقة المعتمدة ومتطلبات جودة المشروع. حفظ سجلات الفحص والتقارير اليومية والوثائق الميدانية. متابعة تقدم المقاول وإبراز أي تأخيرات أو قضايا فنية. ضمان الالتزام بمتطلبات الصحة والسلامة والبيئة للمشروع أثناء أنشطة الموقع.<br>المتطلبات<br>درجة البكالوريوس في الهندسة الزراعية، الهندسة الريّية، الهندسة المدنية، أو مجال ذي صلة. خبرة لا تقل عن 7 سنوات ذات صلة في فحص وإشراف الري. خبرة سابقة في مشاريع بنية تحتية رئيسية، طرق، جسور، تنسيق المناظر الطبيعية، أو الساحات العامة. معرفة قوية بشبكات الري، المضخات، الصمامات، الضوابط وأنظمة الأنابيب المرتبطة بها. يفضل الخبرة في العمل مع المستشارين أو فرق PMC. معرفة جيدة بإجراءات ضمان الجودة/ضمان الجودة ومتطلبات فحص الموقع.

Risk Wise Company is currently looking for a qualified HSE Inspector to join our team for an exciting project with leading companies in Saudi Arabia.<br>Position: HSE Inspector Project Duration: 3 Months Location: Saudi Arabia, Riyadh<br>Requirements:Saudi National. Male or Female.3–5 years of experience as an HSE Inspector. Valid HSE certifications. NEBOSH Certificate (Mandatory). OSHA, IOSH, and NEBOSH certifications are highly preferred.

Company Overview:Join a highly reputable AEC consultancy with over 40 years of experience in delivering iconic projects across hospitality, commercial, industrial, and mixed-use sectors. With expertise in sustainable design, construction supervision, and project management, this firm is a leader in the field, renowned for comprehensive and visionary approaches to high-impact developments.<br>Project Overview:This prestigious heritage project in Riyadh is part of Saudi Arabia's Vision 2030 initiative and targets Gold LEED certification. The development includes mixed-use buildings, academies, a traditional Najdi-style local mosque, a digital art museum, and a unique mud-brick cinema with underground parking. This project combines state-of-the-art facilities with traditional design elements, embodying cultural authenticity and modern sustainability goals.<br>Job Summary:The MEP Inspector is a site-based quality control role responsible for verifying that Mechanical, Electrical, Plumbing, and Fire & Life Safety (FLS) installations are executed in accordance with approved design drawings, technical specifications, method statements, and quality standards. Working as part of the Construction Supervision Consultant (CSC) team of over 80 site professionals, the MEP Inspector reports to the MEP Resident Engineer and supports the wider CSC team in monitoring the Contractor's day-to-day MEP works. This role requires meticulous attention to detail, sound technical knowledge of MEP systems, and the discipline to enforce compliance with project quality, safety, and LEED sustainability requirements on this landmark heritage development.<br>Key Responsibilities:Inspect HVAC installations, including duct alignment, support spacing, vibration isolators, and insulation thickness. Monitor chilled water systems: pipe slopes, valve orientation, welding quality, and insulation continuity. Review installation of valves, strainers, pumps, and piping accessories against approved submittals. Inspect fire protection systems, including pump room layout, hydrant connections, hose reels, and control panels. Witness mechanical system tests: pressure testing, leakage testing, flushing, balancing, and TAB reports. Inspect electrical installations, including conduit routing, cable tray installation and fill ratios, cable laying, segregation of LV/ELV circuits, labeling, and terminations. Witness electrical tests: insulation resistance (megger), continuity, earth loop impedance, and loop checks. Oversee installation of switchgear, MDBs, SMDBs, distribution boards, and associated panels. Check functional operation of emergency lighting, exit signage, fire alarm systems, and ELV systems (BMS, security, ICT, access control, PA, CCTV). Ensure compliance with manufacturers' installation manuals, approved method statements, and project specifications throughout all MEP works. Coordinate clearances and interfaces with structural, architectural, and other MEP disciplines to avoid conflicts and rework. Adhere to the project Inspection & Test Plan (ITP), verifying inspection stages and hold points prior to progressing works. Raise and process Work Inspection Requests (WIR) and Material Inspection Requests (MIR) in a timely manner. Document and escalate deviations through Non-Conformance Reports (NCR) and Site Observation Reports (SOR), and follow through on corrective actions. Prepare Daily Site Reports capturing manpower, equipment, weather conditions, and progress of MEP works. Conduct snagging and de-snagging inspections and support handover and final acceptance activities. Assist in the verification of As-Built drawings against actual site conditions. Provide input to CSC Daily, Weekly, and Monthly progress reports. Review and verify the Contractor's Progress Reports and percentage progress claimed in the Contractor's Interim Payment Applications (IPA).<br>Key Qualifications:Educational Background: Bachelor's degree in Mechanical Engineering, Electrical Engineering, or a related field. A Diploma with substantial equivalent MEP inspection experience will also be considered. Professional Experience: Minimum of 5-8 years of experience in MEP inspection or site supervision on large-scale construction projects, ideally including at least 2-3 years within the GCC region. Experience working within a Construction Supervision Consultant (CSC) team is an added advantage. Technical Skills: Solid working knowledge of HVAC, plumbing, fire & life safety, and electrical/ELV systems, with the ability to read and interpret shop drawings, specifications, and method statements. Familiarity with relevant international codes and standards (e.g., ASHRAE, NFPA, NEC/IEC, SBC) and LEED requirements. Certifications: Relevant professional certification or industry membership is desirable. Soft Skills: Strong attention to detail and observational skills, effective written and verbal communication, and the ability to work collaboratively with contractors and multidisciplinary CSC teams. Sound judgment in identifying, documenting, and escalating non-conformances. Technical Proficiency: Proficiency in MS Office and inspection/QA-QC tracking systems; familiarity with CAD or BIM tools is a plus.<br>Joining Time:Two weeks (12 -14) Days

Job Title Senior Field IECEx Inspector Department IECEx Inspection & Certification — Special Projects Location Riyadh, Saudi Arabia, Durma— approx. 250 km from Riyadh Employment Type Full-Time Experience Required Minimum 6 years in E&I inspection, installation, or quality control across oil & gas, petrochemical, or power generation sites. Prior inspection or installation work on Combined Cycle Gas Turbine power plants is an advantage Education Diploma or Bachelor’s degree in Electrical, Electronic, or Instrumentation Engineering or equivalent. Mandatory Certification Comp Ex Ex01–04 (gas/vapor) or IECEx CoPC Units 001/003/004/006/007/008 minimum — required. Certificate must be current, unrevoked, and independently verifiable (compexcertification.com / iecex.com). Additional Requirements (Optional) Ex11 (mechanical), OPITO BOSIET with EBS and OPITO Basic H2S training. Rope Access / Working at Height certification. ISO 9001:2015 awareness training an advantage. Language English — must read, write and complete technical documents in English. Iqama Valid & Transferable required About the Role The Senior Field IECEx Inspector leads day-to-day inspection execution in the field, performing Visual (V), Close (C), and Detailed (D) grade inspections of hazardous area electrical and instrumentation installations in accordance with IEC 60079-17:2023. This role works under the technical direction of the Lead IECEx Inspector, takes ownership of specific classified areas, mentors and checks the work of Field Inspectors, and contributes directly to NCR identification, close-out verification, and inspection record quality. The initial deployment covers the PP12 Expansion CCGT IPP Project (1,800 MW, Durma, KSA) spanning 14 classified hazardous areas from Zone 0 to Zone 2, covering natural gas, hydrogen, and diesel oil hazard categories. The Senior Field Inspector is expected to operate with a high degree of independence within their certified competency scope and to deputize for the Lead Inspector on routine area-level decisions when required. Key Responsibilities All responsibilities are performed in compliance with IEC 60079-17:2023, IEC 60079-14:2013, API RP 505:2018, and the project Hazardous Area Classification drawing, and strictly within the Senior Field Inspector's certified competency scope. 1. Document Review & Area Ownership • Review the Hazardous Area Classification drawing in detail for all assigned areas — verify zone boundaries, gas groups, and temperature classes before inspection commences. • Flag any discrepancy between the HAC drawing and site conditions directly to the Lead Inspector with supporting evidence. • Take ownership of one or more classified hazardous areas for the duration of the inspection program — plan the inspection sequence, equipment list, and required tools for the assigned area(s). • Brief assigned Field Inspectors on the day's scope, applicable ITP activities, and area-specific hazards before work begins. 2. ITP & SOP Application • Execute and oversee inspection activities strictly in accordance with the approved Inspection & Test Plan (ITP) — apply the correct inspection grade for each activity and verify that Field Inspectors do the same. • Identify and escalate any activity that falls outside the current ITP scope to the Lead Inspector before proceeding. • Apply and reinforce all approved SOPs in the field — cable gland inspection, conduit sealing checks, earthing continuity verification, and enclosure integrity checks. • Coach Field Inspectors on correct SOP application and correct any deviations observed during fieldwork. 3. Inspection Execution (Visual, Close & Detailed) • Personally perform and quality-check Visual (V) and Close (C) grade inspections across assigned areas — equipment certification checks, cable gland and gland-to-cable compatibility verification, bolt/fastener checks, and conduit sealing checks. • Use only Ex-rated or non-sparking tools when working within classified zone boundaries. • Perform Detailed (D) grade inspection activities within personal certified scope — including instrument testing, insulation resistance checks, and enclosure internal inspections, as authorized by the Lead Inspector. • Record all test results accurately and flag any reading outside acceptance criteria immediately. • Spot-check the work of Field Inspectors within the assigned area — verify inspection grade accuracy, photographic evidence quality, and completeness of inspection records before submission. 4. Non-Conformity Report (NCR) Management • Identify non-conformances during inspection and provide an initial classification recommendation (Critical / Major / Minor) to the Lead Inspector for confirmation. • Ensure all NCRs raised within the assigned area are supported by clear photographic evidence, equipment tag, area code, and relevant standard clause reference. • Conduct first-level re-inspection of rectified NCR items within the assigned area — confirm physical correction matches the reported corrective action before recommending close-out to the Lead Inspector. 5. Documentation & Records • Complete and review inspection record forms for the assigned area — ensure equipment tag, area code, ITP reference, inspection grade, result, and photo reference are accurate and complete for every item. • Consolidate and submit the assigned area's daily inspection records to the Document Controller within the same working day. • Maintain an area-level progress log — equipment inspected, NCRs raised/closed, and percentage completion — and report this to the Lead Inspector at the end of each shift. 6. Tools, Instruments & Calibration • Verify calibration status of all instruments used by the team in the assigned area before each shift — confirm calibration sticker, expiry date, and certificate availability. • Withdraw from service immediately any instrument found damaged, malfunctioning, or out of calibration, and notify the Lead Inspector. • Maintain accountability for tools and instruments issued to the assigned area team — ensure proper storage, handling, and return at the end of each shift. 7. HSE & Site Safety • Lead by example on all zone entry requirements — valid Permit to Work, active calibrated personal gas detector, and buddy system — and confirm compliance by all team members in the assigned area. • Confirm evacuation routes and muster points for the assigned area before any new work activity, particularly in Zone 0/1 areas. • Lead or contribute to Job Safety Analysis (JSA) briefings for the assigned area's daily activities — identify hazards specific to that area and confirm team understanding of controls. • Exercise stop-work authority for unsafe conditions observed within the assigned area and report immediately to the Lead Inspector or HSE Officer. • Ensure all team members in the assigned area comply with mandatory PPE requirements and sitespecific HSE rules, including heat stress management protocols during summer working hours. 8. Schedule & Mobilization • Complete all personal certificate submission, medical clearance, and site induction requirements before the confirmed joining date. • Confirm tool and PPE issue for self and assign Field Inspectors before first site entry. • Plan and sequence inspection activities within the assigned area to meet the overall project schedule — notify the Lead Inspector promptly of any delay, access obstruction, or resourcing issue. 9. Schedule & Team Coordination & Mentoring • Provide day-to-day supervision and technical guidance to Field Inspectors assigned to the same area — ensure work is performed within each individual's certified competency scope. • Mentor junior Field Inspectors on inspection technique, standard interpretation, and professional site conduct. • Report progress, findings, and obstacles to the Lead Inspector clearly and promptly. Escalate any conflict, safety concern, or scope ambiguity that cannot be resolved at area level. • Maintain professional conduct with site personnel, client representatives, and other contractors at all times.

Eastwest Group of Companies (RL0980) is looking for QC Inspector (Piping / Welding)<br>Job Description / Responsibility Conduct inspection of piping, welding, and fabrication activities in accordance with approved drawings, project specifications, international codes, and client requirements. Perform visual inspection (VT) of weld joints, fit-up, edge preparation, alignment, and dimensional checks before, during, and after welding. Verify Welder Qualification Records (WQT), Welding Procedure Specifications (WPS), Procedure Qualification Records (PQR), and ensure compliance with approved welding procedures. Coordinate and witness Non-Destructive Testing (NDT) activities such as RT, UT, MT, PT, and review test reports. Monitor material receiving, identification, traceability, storage, and preservation in compliance with project quality requirements. Inspect piping installation, flange alignment, supports, bolt tightening, and ensure proper installation according to P&ID, isometric drawings, and construction standards. Witness hydrostatic, pneumatic, flushing, and leak tests, and prepare inspection reports. Raise Non-Conformance Reports (NCRs), monitor corrective and preventive actions (CAPA), and verify close-out. Prepare and maintain quality documentation including Inspection & Test Plans (ITP), inspection reports, punch lists, weld maps, and quality records. Coordinate with construction, engineering, NDT, and client representatives to resolve quality-related issues. Ensure compliance with ASME, AWS, API, ISO, and client-specific quality standards. Participate in internal and external quality audits and support project quality management activities. Promote workplace safety by ensuring all inspection activities comply with HSE regulations and permit-to-work requirements. Perform final inspections and support project mechanical completion, pre-commissioning, and handover documentation.<br>Educational Requirements Bachelor in Engineering (BEngg) Diploma in Mechanical Skills Required: Industrial & Production Engineering, Plant Operation, Oil and Gas System Maintaining, QA/ QC Welding, pipelines, Manufacturing (Heavy Industry)<br>Experience Requirements At least 8 year(s) The applicants should have experience in the following business area(s): Manufacturing (Light Engineering and Heavy Industry)<br>Additional Requirements This job vacancy is for a Saudi Aramco project. Before applying, carefully read the job requirements, qualifications, and eligibility criteria to ensure your profile meets the specified requirements. Only qualified candidates are encouraged to apply. Oil & Gas Fields Experienced, ex-Aramco approved candidates will be the 1st priority. For QC Welder - Oil & Gas Fields Experiences with Valid AWS/CSWIP Certificate. Ex-Aramco approved as piping inspector Has knowledge of SAEP 385 ( PIPING, Equip., steel,….etc) Welding Inspector - Inspector shall be certified as an American Welding Society CWI, CSWIP 3.1 Certified Welding Inspector, or COMPANY approved equivalent. Inspector shall have a demonstrated background and thorough knowledge of codes such as ASME B 31.3, 31.4 and 31.8, ASME Section V and IX, API 620 and 650, AWS D1.1, required for the execution of the WORK. Where Nondestructive Testing (NDT) forms part of the WORK, and Inspector is required to review or ensure NDT programs and results, the candidate shall have been previously qualified and certified to a minimum ASNT Level II in the relevant method(s). When performing, reviewing or ensuring Nondestructive Testing in VT, MT, PT, RT or UT, the candidate shall be certified in the specific method(s). When performing, reviewing or ensuring Radiographic Testing Film Interpretation (RTFI), Inspector shall be certified in RTFI<br>Job Location Saudi Arabia<br>Salary Tk. 300000 - 350000 (Monthly)

Landscape Inspector We are seeking expressions of interest for an on-site Landscape Inspector role supporting a major urban road and public realm infrastructure opportunity in Riyadh, Saudi Arabia. Requirements Minimum 10 years of relevant experience. Diploma in Landscape, Horticulture, Agriculture, Civil Engineering, or a related discipline. Proven inspection experience in softscape, hardscape, planting, irrigation interfaces, materials, and workmanship. Experience reviewing drawings, inspection requests, method statements, and quality documentation. Ability to identify non-compliant works and coordinate effectively with contractors and site teams. Candidates must demonstrate strong site-based landscape inspection experience. Design-only experience will not satisfy the role requirements.

WE’RE HIRING | Senior Architectural / Finishing Inspector???? Location: Riyadh, Saudi Arabia???? Project: High-End Residential Tower We are seeking an experienced Senior Architectural / Finishing Inspector to join our supervision team for a luxury residential tower project in Riyadh. Requirements:10 years of experience in architectural & high-end finishing works. Minimum 3 years of experience in Saudi Arabia. Strong experience in luxury residential towers, 5-star hotels, or high-end fit-out projects. Excellent knowledge of finishing quality, workmanship, mock-ups, inspections, snagging & handover. Consultant / PMC experience is preferred. Nationality: Filibino or Chinese nationality preferred. Currently based in Saudi Arabia with transferable Iqama is preferred.

SGS is the world’s leading Testing, Inspection and Certification company. We operate a network of over 2,500 laboratories and business facilities across 115 countries, supported by a team of 99,500 dedicated professionals. With over 145 years of service excellence, we combine the precision and accuracy that define Swiss companies to help organizations achieve the highest standards of quality, compliance, and sustainability. SGS is seeking experienced Rotating Mechanical Inspectors to support inspection activities for a major project in Saudi Arabia. The role involves ensuring compliance with project specifications, international standards, and client requirements across mechanical inspection scopes.<br><br><br><br>Job Description<br><br>Perform mechanical inspections in accordance with approved Inspection Test Plans (ITPs) and project specifications Conduct inspections on pressure vessels, piping systems, storage tanks, and static equipment Verify compliance with applicable codes and standards such as ASME, API, and Aramco standards Witness and review activities including welding, fabrication, NDT, hydrotesting, and installation Review and validate WPS, PQR, and welder qualifications Monitor contractor performance and ensure adherence to quality and HSE requirements Identify non-conformities and support NCR issuance and close-out Prepare and maintain detailed inspection reports, logs, and documentation Coordinate with client representatives, contractors, and internal teams to ensure smooth execution of inspection activities Ensure compliance with project timelines, quality standards, and reporting requirements Strong knowledge of mechanical inspection practices in oil & gas projects Experience with Saudi Aramco standards and approvals (preferred) Familiarity with EPC projects involving metallic and non-metallic systems Hands-on experience in NDT methods (VT, MT, PT, UT, RT)<br><br>Qualifications<br><br>Bachelor’s degree in mechanical engineering OR 2-year Industrial/Technical Diploma in Mechanical discipline Minimum 6 years of inspection experience (for Engineering Degree holders) Minimum 12 years of inspection experience (for Diploma holders) Mandatory Certifications:AWS Senior CWI or CSWIP 3.2API 570 (Piping Inspector) API 510 (Pressure Vessel Inspector) API 653 (Storage Tank Inspector)

Greenland Group is looking for Nondestructive Testing (NDT) Inspector (Ministry of Defense, Saudi Arabia)<br>Job Description / Responsibility Testing Execution: Set up, calibrate, and operate NDT equipment to conduct inspections. Common testing methods include Ultrasonic (UT), Radiographic (RT), Magnetic Particle (MT), Liquid Penetrant (PT), and Visual Testing (VT). Defect Evaluation: Interpret test results, read blueprints, and evaluate findings to determine whether parts, welds, or structures are acceptable or need repair. Compliance & Safety: Ensure all inspections adhere to strict local safety, quality, and government regulations. Documentation: Carefully document all testing procedures, processes, and results, generating detailed reports for engineers and clients. Collaboration: Interface directly with clients, welders, and project managers to report on testing progress and resolve any structural issues. Educational Requirements Diploma in Mechanical Skills Required: Inspection, Workshop, Quality Inspection, Automobile, Safety Inspector, Workshop operation Experience Requirements At least 5 year(s) The applicants should have experience in the following business area(s):Overseas Companies, Group of Companies,Automobile,Motor Workshop Salary Tk. 130000 - 140000 (Monthly)

Esnad Roads Contracting Company is looking for a Civil QC Inspector to join our project in Jeddah, Saudi Arabia.<br>Key Responsibilities:Perform daily inspections of civil construction activities, including excavation, backfilling, compaction, concrete works, formwork, reinforcement, masonry, finishing, and other related civil works. Ensure all works are executed in accordance with approved IFC drawings, project specifications, Method Statements, and Inspection & Test Plans (ITPs). Inspect and verify materials delivered to site to ensure compliance with approved submittals and project requirements. Prepare, submit, and coordinate WIRs/MIRs with the Consultant/Client. Witness and coordinate required field and laboratory tests, including soil, concrete, reinforcement, and other civil quality tests. Identify and report non-conforming work and follow up on corrective actions with the site team. Maintain and update all quality records, inspection reports, test reports, WIR/MIR records, NCRs, and related QC documentation.<br>Requirements:Diploma or Bachelor's Degree in Civil Engineering.3–5 years of experience as a Civil QC Inspector in infrastructure projects. Strong knowledge of civil quality control, project specifications, ASTM & ACI standards, and quality procedures. Previous experience or approval in Saudi Aramco, NEOM, SABIC, or Royal Commission projects. (Mandatory) Relevant QC certifications. (Preferred)

Esnad Roads Contracting Company is looking for a Civil QC Inspector to join our project in Jeddah, Saudi Arabia.<br>Key Responsibilities:Perform daily inspections of civil construction activities, including excavation, backfilling, compaction, concrete works, formwork, reinforcement, masonry, finishing, and other related civil works. Ensure all works are executed in accordance with approved IFC drawings, project specifications, Method Statements, and Inspection & Test Plans (ITPs). Inspect and verify materials delivered to site to ensure compliance with approved submittals and project requirements. Prepare, submit, and coordinate WIRs/MIRs with the Consultant/Client. Witness and coordinate required field and laboratory tests, including soil, concrete, reinforcement, and other civil quality tests. Identify and report non-conforming work and follow up on corrective actions with the site team. Maintain and update all quality records, inspection reports, test reports, WIR/MIR records, NCRs, and related QC documentation.<br>Requirements:Diploma or Bachelor's Degree in Civil Engineering.3–5 years of experience as a Civil QC Inspector in infrastructure projects. Strong knowledge of civil quality control, project specifications, ASTM & ACI standards, and quality procedures. Previous experience or approval in Saudi Aramco, NEOM, SABIC, or Royal Commission projects. (Mandatory) Relevant QC certifications. (Preferred)

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>We are looking for an experienced Senior HSE Inspector to support HSE supervision activities on major infrastructure and utility projects in Jeddah . Candidates must have strong consultant supervision experience and a proven track record in enforcing HSE standards on active construction sites.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Diploma / Bachelor s degree in Engineering, Occupational Safety, Environmental Science, or related field.</li><li>5 10 years of HSE experience , with at least 3 5 years in consultant supervision .</li><li>HSE certification: NEBOSH IGC (mandatory). Additional HSE training/certifications will be an advantage.</li><li>Solid knowledge of Saudi HSE regulations, municipal safety standards, and international HSE management systems (ISO 45001 / ISO 14001 / OSHA).</li><li>Previous experience on utility, road, pipeline, or infrastructure projects within KSA is preferred.</li><li>Strong communication, reporting, and inspection skills.</li></ul><p></p></section>

About the Role:The Mechanical Site Inspector plays a crucial role in ensuring that mechanical installations and systems are executed according to the project specifications and standards. This position requires a keen eye for detail and a strong understanding of mechanical engineering principles. The inspector will be responsible for monitoring the installation process, conducting inspections, and ensuring compliance with safety regulations and quality standards. The ideal candidate will possess a blend of technical expertise and practical experience in the field, enabling them to effectively communicate with contractors and project managers.<br>What you will be doing:Monitor the installation of mechanical systems, including HVAC, plumbing, and fire protection systems. Conduct regular site inspections to ensure compliance with mechanical specifications and standards. Prepare detailed inspection reports and documentation of findings for project stakeholders. Provide technical guidance and support to construction teams as needed. Stay updated on industry trends and advancements in mechanical engineering practices. Review and interpret mechanical drawings and specifications to verify accuracy and completeness. Supervise and manage the processes related to the site work preparation, execution, verification, and validation of Contractor’s submissions, site works and effective implementation. Required Experience:3 years of experience in mechanical site field. Worked with reputable Consultant Engineering Firms needed. Full knowledge of Statutory Authorities requirements. Education:Bachelor's degree or Diploma in Mechanical Engineering field. Certifications & Memberships:Saudi Council of Engineers (SSE) Membership or any local engineer's society membership, i.e. CRPEP (for Bahrain). Essential Skills:Supervise site works and effective execution. Executes the specific inspections on materials, equipment and construction/installation activities on site. Strong analytical and problem-solving skills. Excellent communication and interpersonal abilities.

company Overview:<br>Dar, the founding member of the Sidara group, is an international multidisciplinary consulting organization specializing in engineering, architecture, planning, environment, project management, facilities management, and economics. Sidara operates in 60 countries with 20,500 professionals, Dar connects people, places, and communities through innovative solutions to the world's most complex challenges. We deliver projects from inception through completion, embracing challenges to empower communities worldwide. Learn more at www.dar.com.<br>Our Vision and Values:<br>We aspire to be the chosen home of those with a gift for crafting solutions that empower people and an unwavering passion for learning and innovation. Our core values shape our culture and guide our decision-making. We are committed to:<br>Excellence Responsibility Empowerment Connectivity Courage<br>Civil Inspector The Civil Inspector will be responsible for supervising and inspecting civil and road works on site, ensuring compliance with project specifications, design drawings, and construction standards.<br>Responsibilities:Inspect civil and road construction works to ensure compliance with drawings, specifications, and standards. Monitor site activities and report any non-conformance or deviations. Verify quantities and ensure quality control of all civil works. Review and check materials, shop drawings, and method statements. Coordinate with contractors, consultants, and site teams regarding progress and technical issues. Ensure proper execution of works in accordance with approved method statements. Support the project team in progress reporting and technical evaluations. Ensure adherence to safety standards and site regulations. Ensure compliance with relevant authorities’ standards (MOT, RCRC, or similar). <br>Qualifications:Bachelor’s degree in civil engineering. Minimum 7 years of experience in civil and road construction projects. Experience in supervision or inspection roles is preferred. Strong knowledge of construction standards, specifications, and quality control procedures. Familiarity with local and international standards.

About the Role BEC Arabia is seeking an experienced QA/QC Civil Inspector to join our team on one of Saudi Arabia's landmark construction projects in Diriyah. The successful candidate will be responsible for ensuring all civil works comply with project specifications, approved drawings, contract requirements, applicable codes, and quality standards. Key Responsibilities Perform inspections of all civil construction activities. Ensure works comply with approved method statements, ITPs, and project specifications. Conduct material receiving inspections and verify compliance with approved submittals. Raise and monitor NCRs, Site Observation Reports (SORs), and corrective actions. Witness testing activities and coordinate with third-party laboratories. Review inspection requests (IRs) and maintain inspection records. Coordinate with consultants, subcontractors, and construction teams. Verify work before consultant inspections. Ensure compliance with Saudi Building Code, ASTM, ACI, BS, and project quality requirements. Participate in internal quality audits and site quality meetings. Maintain quality documentation and daily inspection reports. Minimum Qualifications Diploma or Bachelor's Degree in Civil Engineering. Minimum 5 years of experience as a QA/QC Civil Inspector. GCC experience is highly preferred. Experience on large-scale building construction projects. Strong knowledge of QA/QC procedures and inspection practices. Ability to read construction drawings and specifications. Excellent communication and reporting skills. Preferred Experience High-rise buildings. Mixed-use developments. Hospitality projects. Commercial developments. Mega projects. Experience working with Tier-1 contractors. Experience with consultant approvals and client inspections. Required Certifications Saudi Council of Engineers (SCE) Registration. ISO 9001 Quality Management System awareness/training. CSWIP 3.1 (preferred). ACI Concrete Field Testing Technician (preferred).

Greenland Group. is looking for Inspector - Quality Assurance (NADEC Company, Saudi Arabia) Job Description / Responsibility Perform quality checks across slaughter, processing, hygiene and packing areas to ensure product compliance. Inspect raw material, carcasses, cuts, packaging and finished products. Verify GMP, temperature, sanitation and process control records. Raise non-conformance reports and follow up corrective actions. Support internal audits and product release checks. QA inspection experience in a slaughterhouse, meat processing plant, chilled food factory or similar high-care food environment. Educational Requirements Diploma in Livestock in Food Science & Technology Doctor of Veterinary Medicine (DVM) in Food Science & Technology Skills Required: Food and Beverage, processed meat, Food items (FMCG), Manufacturing (FMCG) Experience Requirements At least 5 year(s) The applicants should have experience in the following business area(s):Training Institutes,Food (Packaged)/Beverage,Agro based firms (incl. Agro Processing/Seed/GM),Overseas Companies,Group of Companies Job Location Saudi Arabia Salary Tk. 130000 - 190000 (Monthly)

Position Summary<br><br>Hanmi Global Saudi Arabia is seeking a qualified Mechanical Inspector to join its Project Management Consultancy (PMC) team for a major residential development project in Riyadh. The successful candidate will be responsible for inspecting mechanical construction activities to ensure compliance with approved drawings, specifications, quality standards, and applicable engineering codes throughout the construction and commissioning phases.<br><br>Project: Major Residential Development Project<br><br>Key Responsibilities<br><br>Inspect mechanical works including HVAC, plumbing, firefighting, LPG (where applicable), chilled water systems, and associated building services Review contractor Inspection Requests (IRs) and conduct inspections in accordance with approved Inspection and Test Plans (ITPs) Verify that installed materials comply with approved material submittals and project specifications Witness pressure testing, flushing, balancing, testing, pre-commissioning, and commissioning activities Identify non-conforming works and issue inspection observations and reports Verify completion of corrective actions before approving completed works Coordinate inspections with Resident Engineers, contractors, and multidisciplinary teams Review inspection reports, testing records, and quality documentation Maintain accurate inspection logs and daily reports Participate in quality audits and project handover inspections Ensure compliance with Quality, HSE, Environmental, and project governance requirements<br><br>Requirements<br><br>Qualifications<br><br>Bachelor's Degree or Diploma in Mechanical Engineering or a related discipline Valid registration with the Saudi Council of Engineers (where applicable)<br><br>Experience<br><br>Minimum 5 years of experience as a Mechanical Inspector Previous experience on residential, commercial, hospitality, or mixed-use developments Experience with PMC, engineering consultants, or international contractors is preferred<br><br>Technical Skills<br><br>Strong knowledge of HVAC, plumbing, firefighting, and mechanical systems Familiarity with ASHRAE, NFPA, IPC, and relevant international standards Ability to review shop drawings and inspection documentation Experience with testing and commissioning procedures Proficiency in Microsoft Office applications<br><br>Professional Certifications<br><br>Saudi Council of Engineers Registration (preferred) Mechanical inspection or QA/QC certifications are considered an advantage<br><br>Core Competencies<br><br>Technical competence Attention to detail Inspection and reporting skills Communication and teamwork Integrity and professionalism Commitment to quality and safety