وظائف فني تعبئة و تغليف في السعودية

<p>Pharmacy technicians assist pharmacists in preparing and distributing medications, maintaining the drug inventory, and maintaining patient records.</p><p>Pharmacy technician work under the supervision of a registered pharmacist according to the regulation of ministry of health.</p><p>To Implement national and international standards.</p><p>Assists pharmacists in filling pharmacy requisitions, prescriptions, cassette fillings, and in maintaining records.</p><p>Assists in ordering, receiving, unpacking, and storing pharmaceuticals and supplies in appropriate locations.</p><p>Prepackages tablets and capsules for inpatient and outpatient dispensing, Labels the prepackaged product and completes the appropriate records.</p><p>Assists in the bulk manufacturing of special pharmaceutical products, operates manufacturing equipment.</p><p>Follows worksheet to prepare products.</p><p>Assists in the preparation of intravenous solution.</p><p>Reconstitutes bulk additives and prepares batches of selected admixtures.</p><p>Maintains proper inventory of drugs.</p><p>Monitors expiration dates.</p><p>Refill crash box.</p><p>Maintains necessary records.</p><p>Develops and co-ordinates the Quality Improvement Program within his/her area of responsibilities.</p><p>Participate in patient and family education to help patients and families to better understand and participate in their care and make well informed care decisions.</p><p>Perform other applicable tasks and duties assigned within the range of his/her knowledge, skills and abilities as directed by Pharmacy Supervisor and/or Pharmacy Manager.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Knowledge of computers, pharmacy calculations, pharmacy and medical terminology and drug classifications.</li><li>two (2) years experience in Hospital pharmacy.</li><li>Diploma in Pharmacy form accredited school of pharmacy with available professional registration certificate</li><li>Bachelor?s Degree in Pharmacy from an accredited college of pharmacy.</li></ul>

<h3 >About Bray International</h3> <p >Founded in 1986, Bray International is a global leader in industrial valves, actuators, and control products. With nearly four decades of engineered excellence, Bray has established a strong reputation for high-performance solutions, superior value, and exceptional customer service. The company operates in over 60 countries across six continents, supporting a wide range of industries including Oil &amp; Gas, Power Generation, Data Centres, HVAC, Food &amp; Beverage, and Petrochemical.</p> <h3 >Role Overview: Assembly Technician</h3> <p >Bray International is seeking a <strong >full-time Assembly Technician</strong> to support its Valve Automation Center (VAC) operations in <strong >Dammam, Eastern region</strong>. This hands-on role involves assembling, testing, inspecting, packaging, and supporting the delivery of high-quality valve automation products. The Assembly Technician plays a vital role in ensuring products are manufactured safely, accurately, and delivered on time, while also contributing to continuous improvement initiatives. The ideal candidate will have <strong >2-5 years of relevant experience</strong>.</p> <h3 >Key Responsibilities</h3> <ul > <li >Assemble valves, actuators, and automation products in accordance with work instructions and engineering drawings.</li> <li >Perform functional testing, inspections, and quality checks to ensure product compliance.</li> <li >Complete required production, testing, and quality documentation accurately and on time.</li> <li >Support pressure testing and final product testing activities where applicable.</li> <li >Assist with receiving, inventory control, packaging, and shipping activities as required.</li> <li >Identify, document, and report quality or safety concerns in a timely manner.</li> <li >Maintain a clean, safe, and organised work environment.</li> <li >Participate in continuous improvement and 5S initiatives to enhance operational efficiency.</li> </ul> <h3 >Required Qualifications and Experience</h3> <ul > <li >Technical diploma, vocational training, or equivalent practical experience.</li> <li >Mechanical and/or electrical assembly experience in a manufacturing environment.</li> <li >Ability to read and interpret engineering drawings, work instructions, and technical documentation.</li> <li >Basic computer skills and experience completing production documentation.</li> <li >Strong attention to detail and commitment to quality and workplace safety.</li> <li >Good communication skills and the ability to work effectively as part of a team.</li> <li >Proactive, reliable, and self-motivated with a strong work ethic.</li> </ul> <h3 >Preferred Skills and Experience</h3> <ul > <li >Previous experience within a Valve Automation Center (VAC) environment.</li> <li >Experience with valves, actuators, controls, or instrumentation products.</li> <li >Experience performing pressure testing and final product testing.</li> <li >Forklift certification and/or warehouse experience.</li> </ul> <h3 >Work Environment and Contribution</h3> <p >This role operates within Bray International's Valve Automation Center, where the Assembly Technician provides hands-on expertise to build, test, inspect, and prepare products for shipment. The position directly influences product quality, customer satisfaction, and on-time delivery performance, supporting the overall efficiency and success of the manufacturing operation.</p>

<h3 >Company Overview and Role Introduction</h3> <p >Nama Chemicals Co., located in Al Jubail, is seeking a dedicated and skilled <strong >Instrument Technician</strong> for a full-time position. This role is central to ensuring the safe and efficient operation of the plant by leading and executing all daily instrument maintenance activities. The Instrument Technician will be responsible for troubleshooting, problem resolution, installation, and repair across a wide range of industrial instrumentation and control systems.</p> <h3 >Role Purpose and Scope</h3> <p >The Instrument Technician plays a critical role in maintaining the operational integrity of Nama Chemicals Co.'s diverse production facilities. This involves hands-on work with industrial instrumentation, process analyzers, Distributed Control Systems (DCS), Programmable Logic Controllers (PLCs), Fire &amp; Gas (F&amp;G) systems, compressor and centrifuge controls, boiler and burner control systems, and bagging machines. These systems support the production of various chemicals, including Chlor Alkali, Calcium chloride, Epichlorohydrin, Ally Alcohol, Utility Vendor Packages, Epoxy Plants, and Caustic Prilling Units.</p> <h3 >Key Responsibilities</h3> <ul > <li >Comply with Nama policies and safety procedures, contributing to target SHE rates and NAMA ISO certified quality standards.</li> <li >Perform daily maintenance activities according to Standard Maintenance Procedures, ensuring high quality, reasonable timeframes, and proper record-keeping and housekeeping.</li> <li >Provide timely feedback to supervisors on any findings or abnormalities.</li> <li >Act as a supervisor during their absence, preparing and submitting required reports.</li> <li >Respond to operation and maintenance activities (normal and emergency cases) and attend on-call if assigned.</li> <li >Attend all on-job and classroom training sessions.</li> <li >Work and troubleshoot independently due to the diverse nature of the work.</li> <li >Demonstrate proficiency in troubleshooting PLC software, DCS, Boiler Control System, and Burner Management System.</li> <li >Acquire and maintain required certifications.</li> <li >Support the supervisor in creating periodic spare parts reviews.</li> <li >Plan for Shutdown activities job lists.</li> <li >Maintain, repair, and calibrate field instruments such as Temperature Transmitters, various types of Pressure Transmitters, Level Transmitters, load cells, pH, Conductivity, and ORP sensors and their transmitters.</li> <li >Maintain, repair, and calibrate process analyzers including ECH GC, various O2 Analyzers, Propylene Analyzer, Moisture Analyzer, CO Analyzer, HCL Analyzers, free Chlorine Analyzers, and AAL GC.</li> <li >Follow up on analyzer PM schedules.</li> <li >Possess maintenance knowledge of various types of flowmeters (DP, Coriolis, electromagnetic, Vortex, etc.).</li> <li >Perform PM/servicing for all types of control valves and on-off valves (globe, butterfly, ball, diaphragm valves) and their related parts (solenoid valves, positioners, limit switches).</li> <li >Maintain, repair, and calibrate vendor packages such as bagging machines, drumming machines, weighbridges, and weighers.</li> <li >Maintain, repair, and calibrate different types of Gas Detectors installed in the plant.</li> <li >Be proficient in handling various instrument tools like Beamex Calibrators and HART communicators (375/475/4100).</li> <li >Lay out, install, and place into service new controlling and instrument devices, calibrating as required.</li> <li >Conduct periodic preventative maintenance inspections of all control instruments, diagnosing existing or potential trouble; clean, lubricate, calibrate, and adjust as conditions indicate.</li> <li >Prepare scope of work for new site jobs.</li> </ul> <h3 >Qualifications and Experience</h3> <ul > <li >3 Years Diploma in Process Instrumentation and Control from a reputed college/university.</li> <li >Vocational Training/Industrial Training Institute background.</li> </ul> <h3 >Required Skills and Knowledge</h3> <ul > <li >Excellent knowledge of Instrumentation and independent troubleshooting.</li> <li >Basic knowledge of DCS and troubleshooting.</li> <li >Excellent knowledge of Programmable Logic Controllers and their troubleshooting.</li> <li >Good troubleshooting knowledge of Analyzers, including basic GC operation and troubleshooting.</li> <li >Computer knowledge and ability to create Purchase Requisitions (PR) in the SAP system.</li> <li >Ability to lead a small team.</li> <li >Knowledge of Industrial safety procedures and standards, including experience in confined space, hot works, working on heights, and energy isolation requirements.</li> <li >Knowledgeable in hazard identification related to environmental aspects and personal safety.</li> <li >Strong ability to perform risk assessments before obtaining permits and to implement mitigation steps during the job (*, PPE requirements, process isolation).</li> <li >Fully aware of Plant EHS requirements for safe task execution.</li> </ul>

<h3><strong>About the Role</strong></h3><p>Johns Hopkins Aramco Healthcare (JHAH) is seeking a <strong>Sterile Processing Technician 3</strong> to join its team in Dhahran. This full-time position is integral to the Sterile Processing Services (SPS) department, focusing on the comprehensive processing of reusable medical items and the preparation of case carts.</p><h3><strong>Role Overview and Impact</strong></h3><p>The Sterile Processing Technician 3 plays a critical role in ensuring patient well-being by meticulously managing reusable items through decontamination, sorting, packaging, sterilization, and storage procedures. The technician operates under established organizational and departmental policies and procedures, utilizing an approved electronic competency evaluation system to maintain high standards of care.</p><h3><strong>Key Responsibilities</strong></h3><ul><li>Handle complex sterilization cases, ensuring full compliance with clinical and organizational standards.</li><li>Support operational efficiency by coordinating resources and managing workflows within the SPS department.</li><li>Provide mentorship and guidance to intermediate and junior staff in sterile processing operations.</li><li>Coordinate effectively with clinical teams to support patient care through efficient sterile processing.</li><li>Plan and direct the processing, preparation, storing, dispensing, checking, and ordering of medical supplies and equipment.</li><li>Participate in and assist segment staff with function assessment, planning, implementation, and evaluation activities.</li><li>Identify safety hazards within the segment and implement necessary corrective actions to prevent accidents, applying quality assurance principles.</li><li>Prepare verbal and written reports for the segment head regarding the condition and functioning of assigned equipment, including sterilizers, aerators, washers, computer terminals, and printers.</li><li>Conduct routine inspections of all equipment used in the SPS area.</li><li>Attend required safety and in-service education programs.</li><li>Perform other related duties as requested to support departmental operations.</li></ul><h3><strong>Qualifications and Experience</strong></h3><p>Candidates for this position should possess <strong>7 years of relevant experience</strong> in sterile processing or a related field. A strong understanding of sterilization processes, compliance standards, and equipment operation is essential.</p><h3><strong>Work Environment and Schedule</strong></h3><p>This role is based within the Sterile Processing Services of Johns Hopkins Aramco Healthcare facilities in Dhahran. The work schedule is full-time and assigned to meet operational needs, which may include various shifts, on-call duties, and scheduled overtime.</p><h3><strong>Application Process</strong></h3><p>Interested candidates are encouraged to apply. Salary details for this position will be discussed during the interview process.</p>

<p>Responsible for the decontamination, preparation, sterilization, and distribution of surgical instruments and medical equipment by Fakeeh Care policy and procedures/standards. The role ensures that all equipment is properly sterilized and available in patient care and surgical procedures.</p><p><strong>Key Responsibilities and Duties:</strong></p><p>1. Decontamination: Receives, sorts, and inspects used surgical instruments and medical equipment for decontamination. Manually cleans instruments using appropriate detergents and disinfectants. Operates and maintains decontamination equipment such as ultrasonic cleaners, washers, and disinfectors.</p><p>2. Preparation and Packaging: Assembles surgical instrument sets and medical equipment according to established protocols. Packages instruments and supplies in preparation for sterilization, ensuring proper wrapping, labeling, and documentation. Inspects instruments for damage or wear and report any issues to the line manager.</p><p>3. Sterilization: Operates sterilizers (e.g., autoclaves) according to manufacturer guidelines and Fakeeh Care policies. Monitors and documents sterilization cycles, including time, temperature, and pressure parameters. Performs routine biological, chemical, and mechanical monitoring tests to ensure effective sterilization.</p><p>4. Storage and Distribution: Stores sterilized instruments and supplies in designated storage areas, ensuring proper rotation and inventory control. Distributes sterilized instruments and equipment to operating rooms, clinics, and other departments as required. Maintains accurate records of sterilization processes and inventory levels.</p><p>5. Quality Control and Safety: Adheres to all infection control and safety protocols to prevent cross-contamination and ensure a safe working environment. Participates in regular equipment maintenance, calibration and performance checks, and quality improvement initiatives. Report any equipment malfunctions/ incidents or safety concerns to the supervisor.</p><p>6. Compliance and Documentation: Ensures compliance with all regulatory standards, including Joint Commission, OSHA, and facility-specific policies. Maintains accurate records of sterilization processes, inventory management, and quality control measures.</p><p>7. Professional Development: Stay updated on advancements in sterilization techniques and technologies through ongoing education and training. Participates in departmental meetings and contributes to continuous improvement initiatives. Attends all mandatory training as scheduled. Demonstrates compassionate communication skills while providing support and care to the patients and staff. Maintain a positive and proactive approach to challenges.</p><p>All Fakeeh Care employees are responsible for continuous improvement, including:</p><ul><li>Performing all duties and tasks in a manner that supports Fakeeh s Person-Centered care values.</li><li>Actively contributing to continuous improvement initiatives, within the scope of the role.</li><li>Adherence to safety protocols and proactively seeking to address any job-related safety concerns.</li><li>Maintaining strict confidentiality of all sensitive information accessed or encountered during work.</li><li>Complying with cybersecurity policies and standards to protect Fakeeh s systems and participating in awareness training and initiatives to prevent cyber threats.</li><li>Adhering to and upholding Fakeeh Care s code of conduct, policies and ethical standards.</li><li>Completion of mandatory education as per the requirement, at least one month prior to expiration.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Minimum of 1-year experience as a certified sterilization technician in a clinically complex tertiary center.</li><li>Knowledge of Performance Improvement Process and International Standards.</li><li>Bachelor's degree associate or Health Science, or similar discipline</li><li>Certification in sterile processing / Diploma in sterilization</li><li>Excellent command of oral and written English</li><li>License from the country of origin, License for practice as per the regional health regulatory authority e.g. (SCFHS / DHA), BLS, ACLS and other LSTC courses as applicable.</li><li>Service Oriented</li><li>Attention to Details</li><li>Critical Thinking</li><li>Must possess Excellent Interpersonal Skills</li></ul>

Overview Who We Are: Ever wonder who brings the entertainment to your flights? Panasonic Avionics Corporation is #1 in the industry for delivering inflight products such as movies, games, WiFi, and now Bluetooth headphone connectivity! How exciting would it be to be a part of the innovation that goes into creating technology that delights millions of people in an industry that s here to stay! With our company s history spanning over 40 years, you will have stability, career growth opportunities, and will work with the brightest minds in the industry. And we are committed to a diverse and inclusive culture that will help our organization thrive! We seek diversity in many areas such as background, culture, gender, ways of thinking, skills and more. If you want to learn more about us visit us at www.panasonic.aero. And for a full listing of open job opportunities go to www.panasonic.aero/join-us/. The Position: The Maintenance Services Technician II is responsible for performing line maintenance activities on Aircraft In-Flight Entertainment and Connectivity (IFEC) systems and other aircraft-installed equipment to ensure optimum system performance, reliability, and serviceability. The role involves inspecting, troubleshooting, testing, repairing, and certifying avionics and cabin systems in accordance with applicable regulatory requirements, company policies, maintenance procedures, and customer standards. The successful candidate will utilize technical knowledge, diagnostic tools, and electronic test equipment to identify and resolve system issues, perform component replacements and functional testing, and support software and media loading activities. Working closely with airline customers and internal stakeholders, the Technician plays a key role in maintaining aircraft serviceability, minimizing operational disruptions, and supporting on-time aircraft departures. In addition to maintenance responsibilities, the role requires the accurate completion of maintenance documentation, inventory-related activities, and adherence to the highest standards of safety, quality, housekeeping, and regulatory compliance. As part of our ongoing growth plans, we are seeking qualified candidates for multiple Maintenance Services Technician II opportunities, with expected onboarding to commence from December 2026. Responsibilities WHAT YOU LL DO: IFEC and Aircraft Systems Maintenance: Performance of maintenance tasks including component replacement, adjustments, inspections, functional tests, and its certification which includes but not limited to: Remove and replace components in accordance with all applicable documentation. Troubleshoot system failures down to Line Replaceable Units (LRU), cabling, or other aircraft systems and perform functional tests post rectification. Perform Cabin Sweep s in accordance with Panasonic LMP s and report findings. Perform Built-in (BITE) and manual test. Perform Software and Media Loading. Clean components and equipment racks/filters if applicable to contract. Complete aircraft documentation in accordance with customer specific requirements Ensure timely escalation and coordination in close contact with the Lead or Supervisor of any problem occurring in the assigned aircraft area. Perform other reasonable related duties as assigned by Lead or Supervisor. As required, based on aircraft type, may work on other aircraft equipment as assigned. Communicate and interface with customers. Certify all work completed as applicable under a company issued authority and governing regulations. Administrative: Assist in the management of airside inventory, cycle counting, packaging and shipping of inventory. Maintain high standards of housekeeping, health and safety and tool care. Perform other reasonable related duties as assigned by immediate Supervisor or Management. Qualifications Secondary/Technical School degree. 12 months experience on Panasonic IFEC systems. Minimum of 24 months on-aircraft experience. Must have worked on aircraft in the last 18 months. Preferably hold appropriate valid KSA GACA Aircraft License / Authority or equivalent required to certify customers different aircraft types/systems at assigned location. Essential aircraft maintenance experience. Excellent communication skills. Ability to work in a high-stress, high-pressure environment. Ability to work in a team environment. Proficient computer skills in Microsoft Word, Excel, and Outlook. Basic computer skills in using Linux. Ability to work in a team environment. Ability to lead and supervise others as needed. Normally receive detailed instructions on all work. Use professional concepts while applying company policies and procedures to resolve a variety of issues. Excellent English language knowledge Must have the legal right to work in assigned country through nationality, visa or work permits. Ability to pass extensive security and background checks. May require both international and domestic travel, up to 25 % of time, to other line station locations to provide relief from time to time as required. Must hold a valid driver s license and be able to meet the requirements of the airport authority for access and vehicle operation on their premises. Ability to work a rotating shift roster that spans 24 hours, 7 days a week, 365 days a year. Manual dexterity to grasp and work with tool parts and equipment. Ability to: Climb and work from ladder or platform and, Sitting, standing, bending or twisting for extended periods and to lift up to 50 pounds and operate under extreme weather conditions and in confined spaces for extended periods and Ability to cope with environmental conditions which may include exposure to congestion and varying noise levels. Our Principles: Contribution to Society | Fairness &amp; Honesty | Cooperation &amp; Team Spirit | Untiring Effort for Improvement | Courtesy &amp; Humility | Adaptability | Gratitude What We Offer: At Panasonic Avionics Corporation we realize the most important aspects in leading our industry are the bright minds behind everything we do. We are proud to offer our employees a highly competitive, comprehensive and flexible benefits program. 2026-50425

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>Eram Talent is seeking a detail-oriented and highly skilled CNC Coolant Filling Technician with specific experience in Post Weld Heat Treatment (PWHT) plant environments.<br> The successful candidate will be responsible for the comprehensive management, preparation, and maintenance of metalworking fluids and coolants for high-precision CNC machinery.<br> This role is critical to maximizing tool life, ensuring machining quality, and maintaining safe, continuous operations within a heavy industrial setting.<br> Key Responsibilities Coolant Management: Accurately mix, distribute, and replenish coolants, cutting fluids, and lubricants across multiple CNC machines according to specific operational parameters.<br> System Testing &amp; Monitoring: Perform daily chemical tests using refractometers and pH meters to monitor coolant concentration, alkalinity, and biological control.<br> Equipment Maintenance: Execute routine cleaning of machine sumps, operate tramp oil skimmers, and maintain coolant recycling and filtration equipment to prevent fluid degradation.<br> PWHT Plant Integration: Safely navigate and operate within heavy industrial environments, specifically alongside Post Weld Heat Treatment (PWHT) operations, ensuring all fluid management aligns with the plant's production and heat-treating schedules.<br> Troubleshooting: Identify and resolve fluid-related issues such as foaming, foul odors, rust, or poor tool life, adjusting chemical dosing as necessary.<br> Inventory Control: Track the consumption of chemical inventory, manage stock levels of raw coolant fluids, and initiate purchase requests to prevent shortages.<br> HSE Compliance: Strictly adhere to all Health, Safety, and Environmental (HSE) protocols regarding the handling, storage, and disposal of hazardous chemicals and waste fluids.<br> Maintain accurate logs and Material Safety Data Sheets (MSDS).<br> Education: High School Diploma, Technical Diploma, or equivalent certification in mechanical maintenance, machining, or industrial chemistry.<br> Core Experience: Minimum of 5 years of hands-on experience in CNC machine maintenance, specifically focused on fluid and coolant management.<br> Industry Experience (Mandatory): Proven work history within heavy manufacturing, Oil &amp; Gas, or large-scale industrial plants.<br> Specific experience working in or around PWHT (Post Weld Heat Treatment) plants is strictly required.<br> Technical Skills: * Proficiency in using fluid testing equipment (e.<br>g., refractometers, titration kits).<br> Strong understanding of coolant chemistry, mixing ratios, and bacterial control.<br> Familiarity with CNC sump cleaning operations and industrial pumping equipment.<br> HSE Knowledge: Solid understanding of industrial safety standards (e.<br>g., OSHA, local regulations) and safe chemical handling/disposal procedures.<br> Soft Skills: Excellent physical stamina, strong attention to detail, and the ability to work effectively both independently and alongside machining operators.<br></span> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> 1+ years </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

<p>Odfjell Technology delivers safe, efficient, and sustainable solutions that save time, cost, and reduce carbon emissions for our clients. Our people connect 50 years of industry experience with the technology of tomorrow. With projects in more than 20 countries we are looking for talented people who can help us overcome the today s challenges and realise the opportunities ahead.</p><p>Odfjell Technology is looking for an experienced Saudi national, locally based in Saudi Arabia, to work as a Service Technician supporting our TRS operations.</p><p><strong>Key Responsibilities:</strong></p><ul><li>Carry out operations according to requirements and guidelines from customers - Running and pulling of casing/tubing</li><li>Make sure that the equipment is working as expected</li><li>Maintain the equipment</li><li>Perform maintenance of equipment as required</li><li>Follow the operator and company's safety instructions</li><li>Follow rules and procedures report incidents, dangerous behaviour, and situations</li><li>Maintain orderliness and cleanliness to ensure a safe workplace</li><li>Participate in "Safe job analysis"</li><li>Participate in Toolbox Talks (TBT) and Safety Meetings.</li><li>Assist to ensure all equipment is received according to delivery ticket and work scope</li><li>Assist to ensure all equipment is safely packed for storing or shipment onshore</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Minimum of 2 years' experience with TRS Operations</li><li>Successfully demonstrate physical ability to perform essential job functions</li><li>Good written and oral English skills</li><li>Computer and systems literate</li><li>QHSE training and awareness</li><li>High School education or equivalent</li><li>Must successfully pass pre-placement medical examination and drug screening</li></ul>

<h3><strong>About the Role: ECHO Technician</strong></h3><p>Dallah Healthcare is seeking a dedicated <strong>ECHO Technician</strong> to join its team. This full-time role is essential for providing high-standard patient care and producing diagnostic images of heart muscle and function. The position requires a professional committed to clinical excellence and patient safety.</p><h3><strong>Role Overview</strong></h3><p>The ECHO Technician is responsible for managing patients and performing echocardiographic examinations to the highest attainable standard of care within Dallah Hospital's resources. This involves the precise setup of specialized equipment and the execution of all related responsibilities to capture accurate cardiac images for diagnostic purposes.</p><h3><strong>Key Responsibilities</strong></h3><ul><li>Prepare for examinations by checking equipment, managing inventory and restocking supplies, reviewing patient schedules, and setting up recording equipment based on physician orders.</li><li>Prepare patients for procedures by positioning them correctly, applying gel and electrodes, adjusting equipment controls, and verifying wave signals.</li><li>Obtain quality images by accurately positioning and repositioning the transducer, monitoring the display screen, listening to the signal, and adjusting equipment for optimal beam strength and focus.</li><li>Record examination information by printing graphics and data, calculating measurements of heart wall, chamber size, and blood flow direction and velocity, and comparing these measurements to established norms.</li></ul><h3><strong>Patient Care and Professional Standards</strong></h3><ul><li>Reduce patient anxieties by clearly explaining procedures, answering questions, and providing necessary assistance to the examination table or treadmill.</li><li>Protect patients by strictly adhering to all safety policies and protocols during examinations.</li><li>Maintain patient confidence and protect operations by keeping all information confidential and cautioning others regarding potential breaches.</li></ul><h3><strong>Qualifications and Experience</strong></h3><ul><li>A minimum of <strong>3 years of experience</strong> as an ECHO Technician.</li><li>Proficiency in setting up and operating echocardiography equipment and performing related diagnostic procedures.</li></ul><h3><strong>Professional Development and Organizational Contribution</strong></h3><ul><li>Update job knowledge through continuous participation in educational opportunities, reading professional publications, and engaging with professional networks and organizations.</li><li>Contribute to organizational goals by taking ownership of new and different requests and actively exploring opportunities to enhance job accomplishments and add value.</li></ul>

About the Role:<br>Aircraft Technician- MRO / Safety Equipment Workshop Location: Riyadh Experience: 5–12 years<br>We are looking for an experienced Workshop Technician / Inspector – Aircraft Safety Equipment with hands-on experience in an aviation MRO, aircraft component workshop, safety equipment shop, oxygen shop or high-pressure cylinder shop. The role will focus on the inspection, testing, servicing, repair, overhaul and maintenance of aircraft emergency and safety equipment, with particular emphasis on evacuation slides/rafts, oxygen cylinders and high-pressure systems.<br>Key Responsibilities:Perform inspection, servicing, repair, testing and overhaul of aircraft safety and emergency equipment. Carry out maintenance and repair activities on aircraft evacuation slides and slide/raft systems. Perform folding, packing and deployment-related procedures for aircraft evacuation slides/rafts in accordance with approved maintenance procedures. Inspect and service aircraft oxygen cylinders/bottles and associated components. Perform inspection, pressure testing, servicing, charging/refilling and requalification of high-pressure cylinders. Work with oxygen systems, oxygen bottles, regulators, valves and associated equipment. Carry out inspection and servicing of aircraft fire extinguishers and related safety equipment, where applicable. Identify defects and perform repairs/rectification in accordance with approved technical documentation. Conduct functional and operational testing following repair or overhaul. Prepare accurate inspection findings, repair records and maintenance documentation. Follow OEM manuals, CMMs, AMMs, service bulletins and approved maintenance procedures. Ensure all maintenance activities comply with applicable MRO quality and aviation regulatory requirements. Follow strict safety procedures while handling oxygen, high-pressure cylinders and other hazardous materials. Coordinate with Quality/Inspection teams for release and certification of completed work.<br>Requirements & Qualifications:5–12 years of hands-on experience in an aviation MRO, aircraft/component workshop, safety equipment shop, oxygen shop or high-pressure cylinder shop. Experience with aircraft evacuation slides/rafts, life rafts, survival equipment, oxygen cylinders/bottles, regulators, valves, high-pressure cylinders or aircraft safety equipment. Hands-on experience in inspection, servicing, repair, overhaul, pressure/hydrostatic testing, requalification, charging/refilling and functional testing of relevant equipment. Good understanding of aviation MRO procedures, workshop safety and hazardous-material handling. Familiarity with CMMs, AMMs, OEM manuals, Service Bulletins and approved maintenance procedures. Knowledge of EASA, FAA and/or GCAA Part-145 requirements is preferred. Diploma / ITI / Technical Certification in Aviation Maintenance, Mechanical, Aerospace or a related discipline. Relevant certification or authorization in aircraft safety equipment, oxygen systems or component maintenance will be an advantage.<br>???? Interested? Apply now / Share your CV to sangeeta.subramani@careernet.in.

<p><strong>Job Summary:</strong> CROWN Arabia Can Company Ltd is seeking a skilled Mechanical Technician to perform maintenance, troubleshooting, and repair of mechanical equipment and systems within our manufacturing facility. This role ensures the efficient and reliable operation of production machinery, minimizing downtime and optimizing performance.</p><p><strong>Job Responsibilities:</strong></p><ul><li>Perform routine preventative maintenance on a variety of mechanical equipment, including presses, conveyors, motors, pumps, and other production machinery.</li><li>Diagnose mechanical malfunctions and effectively troubleshoot issues using blueprints, schematics, and diagnostic tools.</li><li>Execute repairs, overhauls, and replacements of defective parts, ensuring adherence to safety standards and quality control.</li><li>Conduct equipment inspections and identify potential issues or areas for improvement.</li><li>Assist in the installation and commissioning of new mechanical equipment.</li><li>Maintain accurate records of maintenance activities, repairs, and parts used.</li><li>Adhere to all company safety policies and procedures, promoting a safe working environment.</li><li>Collaborate with production and engineering teams to optimize equipment performance and resolve recurring issues.</li><li>Provide support for emergency breakdowns and respond promptly to critical equipment failures.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Diploma or Technical Certificate in Mechanical Engineering, Industrial Maintenance, or a related field.</li><li>Proven experience as a Mechanical Technician in a manufacturing or industrial environment, preferably in a can manufacturing or similar high-volume production setting.</li><li>Strong understanding of mechanical principles, hydraulics, pneumatics, and power transmission systems.</li><li>Proficiency in reading and interpreting technical drawings, blueprints, and schematics.</li><li>Skilled in using a variety of hand tools, power tools, and diagnostic equipment.</li><li>Ability to work independently and as part of a team.</li><li>Excellent problem-solving and troubleshooting skills.</li><li>Strong commitment to safety and adherence to all safety regulations.</li><li>Effective communication skills, both verbal and written.</li><li>Flexibility to work shifts, weekends, and holidays as required.</li></ul>

<h3><strong>Role Overview</strong></h3><p>Nama Chemicals Co. is seeking a skilled <strong>Technician, Millwright</strong> for a contract position based in Al Jubail. This role is critical for performing daily maintenance activities to ensure the safe and efficient operation of the plant without interruption. The successful candidate will be responsible for the installation, maintenance, repair, and documentation of various rotary and static equipment.</p><h3><strong>Key Responsibilities</strong></h3><ul><li>Perform daily maintenance activities according to Standard Maintenance Procedures, ensuring high quality and reasonable completion times.</li><li>Properly fill and record maintenance checklists, maintaining proper housekeeping after activity completion.</li><li>Provide feedback to the supervisor on any findings or abnormalities during job performance.</li><li>Respond to operation and maintenance activities, including both normal and emergency cases.</li><li>Execute preventive maintenance across all types of rotary equipment, including pumps, compressors, and gearboxes.</li><li>Execute shutdown maintenance in static equipment, encompassing column cleaning, column tray inspection, and installation of trays.</li><li>Operate, maintain, and repair basic machine tools such as grinding, drilling, and tapping tools.</li></ul><h3><strong>Equipment Expertise</strong></h3><p>The role requires comprehensive expertise in the maintenance and repair of a diverse range of industrial equipment, including:</p><ul><li>Installation, maintenance, and repair of horizontal and vertical centrifugal pumps, reciprocating pumps, and screw pumps.</li><li>Installation, maintenance, and repair of centrifugal, reciprocating, and screw type compressors, as well as air blowers.</li><li>Performing alignment in rotating equipment and replacing bearings in rotary equipment.</li><li>Installation and repair of mechanical seals in centrifugal pumps and agitators.</li><li>Servicing various types of valves, such as ball valves, gate valves, globe valves, and diaphragm valves, and repacking gland packings.</li><li>Installation, removal, and fabrication of gaskets.</li><li>Performing repair and maintenance of bagging machine equipment.</li></ul><h3><strong>Safety and Compliance</strong></h3><p>Adherence to safety and quality standards is a core aspect of this position. The Technician, Millwright will:</p><ul><li>Comply with Nama Chemicals' policies and safety procedures, contributing to achieving target EHS rates.</li><li>Ensure compliance with quality procedures and NAMA ISO certified standards.</li><li>Learn and practice safety procedures, emergency response protocols, safety suggestions, and good housekeeping practices.</li></ul><h3><strong>Candidate Requirements</strong></h3><p>We are seeking a dedicated professional with a proven track record in industrial maintenance. Essential requirements include:</p><ul><li>Between <strong>8 to 12 years</strong> of experience as a Technician, Millwright or in a closely related maintenance role.</li><li>Demonstrated ability to perform the technical tasks and responsibilities outlined above.</li><li>Willingness to be available for on-call duty if assigned.</li><li>Commitment to attending on-the-job and classroom training sessions, as well as other scheduled training programs.</li></ul><h3><strong>Work Environment</strong></h3><p>This contract role in Al Jubail operates within a dynamic industrial environment where maintaining plant integrity and operational efficiency is paramount. The position requires a proactive and detail-oriented individual capable of working independently and as part of a team to uphold Nama Chemicals' high standards.</p>

<p>Operation of Packaging machines, such as IMA Blistering machine, Uhlmann Cartoning machine, Bosch machines, Mettler Toledo printer and aggregation machines.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Diploma in Science or related disciplines such as Chemistry, Pharmacy, Engineering, Business Management or related field, Vocational Course or TESDA Certification</li><li>Minimum of 3 years work experience from the Pharmaceutical Manufacturing Industry</li></ul>

<h1><span><strong>Division:</strong> Sports and Entertainment</span></h1> <h1><span><strong>Department:</strong> GALAXEA</span></h1> <h1><span><strong>Company:</strong> Sports and Entertainment Company</span></h1> <p> </p> <p> </p> <p><strong>Red Sea Sports s Entertainment (RSSE) </strong>is a dedicated subsidiary of <strong>Red Sea Global (RSG)</strong>, responsible for designing and delivering outstanding land and marine experiences at <strong>The</strong><strong> Red Sea destination</strong>. RSSE manages and operates a diverse portfolio of sports, adventure, and leisure offerings, including water sports through <strong>Galaxea</strong>, adventure activities via <strong>Akun</strong>, and leisure experiences delivered by <strong>WAMA</strong>.</p> <p> </p> <p>RSSE plays a key strategic role in the partnership between <strong>Red Sea Global </strong>and the <strong>Saudi Olympic s Paralympic Committee</strong>, united by a shared ambition to promote inclusive, accessible, and world-class sports and recreational experiences.</p> <p> </p> <p>Guided by a purpose-driven approach and a strong commitment to people and the planet, RSSE delivers innovative programs aligned with <strong>Saudi Vision 2030</strong>, supporting the Kingdom’s ambition to become a global leader in regenerative tourism.</p> <h2> </h2> <h2><span><strong>Job Purpose</strong></span></h2> <p>The <strong>Dive Technician</strong> is responsible for ensuring the safe, reliable, and efficient maintenance, servicing, and operational readiness of all diving equipment and technical assets across GALAXEA dive centres within The Red Sea and AMAALA destinations. Reporting to the Dive Center Manager, the role supports daily dive operations by maintaining life-support equipment, compressors, cylinders, boats, and associated facilities in accordance with manufacturer recommendations, PADI standards, and company procedures.</p> <p>The Dive Technician plays a critical role in ensuring equipment reliability, operational safety, and asset longevity while supporting dive operations, inventory management, and continuous improvement initiatives to deliver exceptional guest experiences.</p> <hr> <h1><span><strong>Key Responsibilities</strong></span></h1> <ul> <li>Perform routine inspection, maintenance, servicing, and repairs of diving equipment, including regulators, BCDs, cylinders, masks, fins, wetsuits, and other life-support equipment.</li> <li>Maintain compressors, air filtration systems, cylinder filling stations, and associated equipment in accordance with manufacturer specifications and industry standards.</li> <li>Conduct cylinder inspections, testing coordination, filling operations, and documentation while ensuring compliance with applicable regulations.</li> <li>Prepare, inspect, and issue diving equipment for daily operations, ensuring all equipment is clean, functional, and safe for guest use.</li> <li>Diagnose equipment faults and perform preventative and corrective maintenance to minimise operational downtime.</li> <li>Maintain accurate maintenance records, equipment service logs, inspection reports, and asset registers.</li> <li>Monitor inventory levels of spare parts, tools, consumables, and replacement equipment, coordinating procurement requirements when necessary.</li> <li>Support dive operations by preparing equipment, loading vessels, and assisting with operational logistics as required.</li> <li>Ensure workshops, compressor rooms, storage facilities, and technical work areas remain clean, organised, and compliant with health and safety requirements.</li> <li>Assist with commissioning new equipment and supporting the mobilisation of new dive centres and operational assets.</li> <li>Coordinate with equipment manufacturers, authorised service centres, and suppliers regarding servicing, warranty claims, and technical support.</li> <li>Ensure compliance with GALAXEA, RSG, PADI, manufacturer, and destination-specific policies, procedures, and Standard Operating Procedures.</li> <li>Apply safety, quality, and environmental management practices to protect guests, employees, company assets, and the marine environment.</li> <li>Participate in emergency response preparedness and ensure emergency equipment remains operational and serviceable.</li> <li>Identify opportunities to improve equipment reliability, maintenance efficiency, operational performance, and cost effectiveness.</li> <li>Perform additional duties as assigned by the Dive Center Manager.</li> </ul> <hr> <h1><span><strong>Job Requirements</strong></span></h1> <h2><span><strong>Skills &amp; Experience</strong></span></h2> <ul> <li>Qualification or certification in dive equipment servicing, mechanical engineering, marine engineering, or a related technical discipline.</li> <li>Manufacturer certifications (e.g., Aqualung, Scubapro, Apeks, Mares, or equivalent) are highly desirable.</li> <li>Minimum <strong>3–5 years'</strong> experience maintaining diving equipment within a commercial dive centre, resort, or marine operations environment.</li> <li>Strong knowledge of regulators, BCDs, compressors, cylinders, gas filling systems, and life-support equipment.</li> <li>Experience with compressor maintenance and air quality monitoring is highly desirable.</li> <li>Familiarity with equipment servicing schedules, preventive maintenance programmes, and asset management systems.</li> <li>Knowledge of diving safety standards and equipment inspection requirements.</li> <li>Valid Fit to Dive Medical Certificate is desirable.</li> <li>PADI Divemaster certification or equivalent is advantageous.</li> <li>Good understanding of workshop safety, manual handling, and risk management practices.</li> <li>Proficiency in Microsoft Office and maintenance record management systems.</li> </ul> <hr> <h1><span><strong>Personal Attributes</strong></span></h1> <ul> <li>Strong technical aptitude with excellent troubleshooting and problem-solving skills.</li> <li>Meticulous attention to detail and commitment to equipment safety and reliability.</li> <li>Strong organisational and time management skills.</li> <li>Ability to prioritise multiple maintenance tasks in a fast-paced operational environment.</li> <li>Self-motivated and capable of working independently with minimal supervision.</li> <li>Excellent communication and teamwork skills.</li> <li>Flexible and adaptable to changing operational requirements.</li> <li>Professional, dependable, and safety-focused.</li> <li>Physically fit and able to lift, move, and maintain diving equipment safely.</li> <li>Good written and spoken English; Arabic or an additional language is an advantage.</li> <li>Demonstrates integrity, accountability, and a commitment to operational excellence, environmental stewardship, and continuous improvement.</li> </ul> </span>

<p>Job Overview</p><p>We are seeking a highly motivated and detail-oriented Packing Supervisor / Packing Staff to join our expanding operations in Makkah, Saudi Arabia. This role is critical to ensuring product integrity, timely order fulfillment, and compliance with safety and quality standards. The ideal candidate will possess a strong background in packing operations, supervision, and a proven ability to optimize processes in a fast-paced environment. This position combines hands-on packing duties with supervisory responsibilities, reporting to the Operations Manager.</p><p>About the Company</p><p>Our company is a leading provider in the [industry/sector], dedicated to delivering high-quality products to customers across regional and international markets. We pride ourselves on a culture of safety, reliability, and continuous improvement, backed by a team of professionals committed to excellence.</p><p>Key Responsibilities and Duties</p><ul><li>Supervise daily packing operations to ensure efficiency, accuracy, and timely order fulfillment.</li><li>Coordinate with production, warehouse, logistics, and QA teams to ensure smooth handoffs and proper documentation.</li><li>Develop and implement packing procedures, standard work instructions, and quality checks to minimize damage and returns.</li><li>Train, mentor, and evaluate packing staff; schedule shifts and manage workload distribution.</li><li>Monitor packing materials, equipment, and workspace cleanliness; ensure compliance with safety and OSHA/local regulations.</li><li>Verify quantities, barcodes, lot numbers, and labeling to ensure accuracy for customer orders.</li><li>Maintain inventory accuracy for packing supplies and monitor usage to control costs.</li><li>Identify and lead continuous improvement initiatives to streamline packing processes and reduce cycle times.</li><li>Prepare operation reports, KPI tracking (e.g., on-time packing rate, damage rate, productivity), and escalate issues as needed.</li><li>Ensure proper protection of products during packing, including use of appropriate packaging materials and methods for various product types.</li><li>Assist in warehouse layout optimization to maximize space and workflow efficiency.</li></ul><p>Qualifications and Requirements</p><ul><li>Bachelor’s degree (university level) in a relevant field or equivalent experience.</li><li>Senior-level experience in packing operations or warehouse/manufacturing environments; supervisory or lead roles are highly desirable.</li><li>Strong understanding of packing materials, packaging standards, and quality control practices.</li><li>Proven ability to manage a team, train staff, and lead by example in a fast-paced environment.</li><li>Familiarity with warehouse management systems (WMS) and inventory control concepts.</li><li>Excellent problem-solving, time management, and organizational skills.</li><li>Attention to detail with a commitment to accuracy and quality.</li><li>Willingness to work flexible hours, including shifts as required by operations.</li><li>Official right to work in Saudi Arabia and ability to comply with local regulatory requirements.</li></ul><p>Required Skills</p><ul><li>Leadership and people management</li><li>Process optimization and continuous improvement (LEAN/Six Sigma familiarity is a plus)</li><li>Quality control and inspection techniques</li><li>Attention to detail and precision</li><li>Strong communication and teamwork</li><li>Safety consciousness and knowledge of workplace safety regulations</li><li>Data analysis and reporting (basic Excel or similar tools)</li></ul><p>Benefits and Perks</p><ul><li>Competitive salary commensurate with experience</li><li>Health insurance and annual medical check-ups</li><li>Paid leave and holiday entitlement</li><li>Opportunities for professional development and career advancement</li><li>Collaborative work environment in a growing organization</li><li>Accommodation allowance or housing support (if applicable)</li></ul>

<h3 >About the Role</h3> <p >Jazeera Paints is seeking a <strong >Painting Technician</strong> to join its team in Khamis Mushayt. This full-time role is essential for executing all painting and finishing tasks efficiently and professionally, ensuring high-quality results that align with company standards and client specifications.</p> <h3 >Role Purpose</h3> <p >The Painting Technician is responsible for delivering professional painting and finishing outcomes, adhering to established company standards, client specifications, and safety regulations. This encompasses comprehensive surface preparation, precise paint mixing and application, and meticulous coordination and documentation of samples for both general project requirements and product development initiatives.</p> <h3 >Core Responsibilities</h3> <ul > <li >Read and interpret blueprints, drawings, and work instructions to determine project requirements.</li> <li >Visit job sites to verify that work specifications align with approved plans.</li> <li >Prepare work areas by setting up scaffolding, covering fixtures, and ensuring proper environmental conditions.</li> <li >Clean, sand, and prepare walls, metals, or other surfaces according to company standards.</li> <li >Mix paints, coatings, and related materials to achieve the required color, texture, and finish, maintaining consistency and timing accuracy.</li> <li >Apply paint, varnish, and other finishes using appropriate tools and techniques such as brushes, rollers, or spray guns.</li> <li >Produce and apply paint samples for testing or client approval, ensuring adherence to color codes and quality standards.</li> <li >Conduct preliminary tests (*, adhesion, drying time) to verify paint quality and application results if needed.</li> <li >Label, document, and record all samples, including material specifications, application methods, and test outcomes.</li> <li >Package and ship samples securely, coordinating with relevant departments and authorities whenever needed.</li> <li >Collaborate with sales, R&amp;D, and project teams to ensure that product and color requirements are fully met if needed.</li> <li >Maintain and clean all painting tools, spray equipment, and work areas after use.</li> <li >Handle all chemical and hazardous materials safely, following company and environmental regulations.</li> <li >Maintain accurate records, documentation, and communication throughout the project lifecycle.</li> </ul> <h3 >General Duties</h3> <ul > <li >Execute activities related to the function using safe and environmentally sound methods.</li> <li >Perform any other duties assigned by the direct supervisor or manager.</li> </ul> <h3 >Required Skills and Attributes</h3> <ul > <li >Strong understanding of painting techniques and finishing processes.</li> <li >Ability to interpret technical documents, blueprints, and work instructions.</li> <li >Proficiency in preparing various surfaces and accurately mixing paint formulations.</li> <li >Adherence to safety protocols and environmental regulations for handling materials.</li> <li >Attention to detail and a commitment to producing high-quality, consistent work.</li> <li >Effective communication and documentation skills for record-keeping and collaboration.</li> </ul> <h3 >Work Environment</h3> <p >This is a <strong >full-time</strong> position based in <strong >Khamis Mushayt</strong>. The role requires hands-on execution of painting tasks in various settings, including job sites and potentially laboratory environments for sample preparation and testing.</p>