وظائف فنى مصاعد - المنطقة الشرقية السعودية

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Position requires a skilled structural mechanic with the to perform Planned Maintenance Interval Inspections (PMI), Organizational, Intermediate, and Depot level maintenance on H-60 helicopters, which also includes troubleshooting, testing, inspections, repairs of hydraulic components, flight controls, pumps, landing gear, tires, hydraulic, pneumatic, rigging, and pressurized systems.</p><p>Essential Responsibilities:</p><ul><li>Current or previous experience performing H-60 helicopter maintenance to include but not limited to:</li><li>Performing maintenance and repair of major assemblies, subassemblies, hydraulic, pneumatic, and related systems.</li><li>Perform inspection, troubleshooting, fault detection, fault isolation, and appropriate corrective actions on hydraulic components and related systems.</li><li>Responsible for all maintenance documentations, applicable forms, records, and reports using appropriate references and other publications including the NAMP.</li><li>Operate and maintain all applicable ground support equipment. Identify, use and maintain all common, special, and precision tools available for power plant maintenance and repair.</li><li>Provide On-the-Job-Training (OJT) for Saudi technicians and other personnel to include maintaining appropriate training records to document training.</li></ul><p>Minimum Position Knowledge, Skills, and Abilities Required:</p><ul><li>8 years current or previous experience performing complex helicopter sheet metal, structures, and mechanical work to include but not limited to: inspection, assembly/ disassembly, repair, replace, troubleshooting, rig checks, test of a variety of hydraulic components, airframes, landing gear assembly, bridge assembly, and rotor head systems.</li><li>Installs, adjusts, aligns, and performs final functional/ operational tests on a variety of major aircraft systems, assemblies, sub-assemblies, components: hydraulic servo s, pumps, main/tail rotor blades, flight controls systems and flight control rigging .</li><li>Disassemble, and reassemble components/sub-systems and determines the required repairs, completes check out procedures to ensure proper operation.</li><li>Visually check component for corrosion, improper wear, and adjustments.</li><li>Be able to use a variety of precision measuring instruments, special tools, scales, test stands, and external power sources.</li><li>Duties may include minor preservation on various components and blades.</li><li>Knowledge of the makeup, operation, installation, and adjustment of a variety of major interrelated and/or integrated aircraft systems, subsystems, and assemblies such as hydraulic, pneumatic systems, airframes, surface repair, and landing gear.</li><li>Inspect main mounts, and tail wheel shocks, struts for cracks, damage, security, leaks, and proper lubrication.</li><li>Ability to read and interpret blueprints and schematic diagrams.</li><li>Must have QAR/CDQAR, or A&amp;P or military equivalent such as Army 15G Technical Inspector or Restricted Technical Inspector, Air Force 2A773, or equivalent miliary MOS are required.</li></ul><p>Preferences :</p><ul><li>H-60 Flight Control Rigging.</li><li>Qualified aircraft paint and finish- preferred.</li><li>Navy Aviation Structural Mechanic AM HSM HSC or Army 15G, Air Force 2A773 HH-60, or equivalent miliary MOS.</li></ul><p>Clearance Requirement:</p><ul><li>Must be able to obtain and maintain a NAC(T3) Background Investigation and drug test. Must be able to obtain and maintain facility credentials/authorization. May be required to obtain and maintain a secret clearance.</li></ul><p>We maintain a drug-free workplace and perform post offer, pre-employment substance abuse testing.</p><p>Work Environment, Physical Demands, and Mental Demands:</p><ul><li>To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed are representative of the knowledge, skills, and/or abilities required. Reasonable accommodations may be made to enable individuals with disabilities to perform essential job functions.</li><li>Must be able to walk and stand on level and/or inclined surfaces for certain periods throughout the day. Also be able to climb stairs, ramps, ladders, and work stands.</li><li>May be required to lift 50 pounds.</li><li>Must be able to distinguish color and judge three-dimensional depth.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Current or previous experience performing H-60 helicopter maintenance to include but not limited to:</li><li>Performing maintenance and repair of major assemblies, subassemblies, hydraulic, pneumatic, and related systems.</li><li>Perform inspection, troubleshooting, fault detection, fault isolation, and appropriate corrective actions on hydraulic components and related systems.</li><li>Responsible for all maintenance documentations, applicable forms, records, and reports using appropriate references and other publications including the NAMP.</li><li>Operate and maintain all applicable ground support equipment. Identify, use and maintain all common, special, and precision tools available for power plant maintenance and repair.</li><li>Provide On-the-Job-Training (OJT) for Saudi technicians and other personnel to include maintaining appropriate training records to document training.</li><li>8 years current or previous experience performing complex helicopter sheet metal, structures, and mechanical work to include but not limited to: inspection, assembly/ disassembly, repair, replace, troubleshooting, rig checks, test of a variety of hydraulic components, airframes, landing gear assembly, bridge assembly, and rotor head systems.</li><li>Installs, adjusts, aligns, and performs final functional/ operational tests on a variety of major aircraft systems, assemblies, sub-assemblies, components: hydraulic servo s, pumps, main/tail rotor blades, flight controls systems and flight control rigging .</li><li>Disassemble, and reassemble components/sub-systems and determines the required repairs, completes check out procedures to ensure proper operation.</li><li>Visually check component for corrosion, improper wear, and adjustments.</li><li>Be able to use a variety of precision measuring instruments, special tools, scales, test stands, and external power sources.</li><li>Duties may include minor preservation on various components and blades.</li><li>Knowledge of the makeup, operation, installation, and adjustment of a variety of major interrelated and/or integrated aircraft systems, subsystems, and assemblies such as hydraulic, pneumatic systems, airframes, surface repair, and landing gear.</li><li>Inspect main mounts, and tail wheel shocks, struts for cracks, damage, security, leaks, and proper lubrication.</li><li>Ability to read and interpret blueprints and schematic diagrams.</li><li>Must have QAR/CDQAR, or A&amp;P or military equivalent such as Army 15G Technical Inspector or Restricted Technical Inspector, Air Force 2A773, or equivalent miliary MOS are required.</li><li>H-60 Flight Control Rigging.</li><li>Qualified aircraft paint and finish- preferred.</li><li>Navy Aviation Structural Mechanic AM HSM HSC or Army 15G, Air Force 2A773 HH-60, or equivalent miliary MOS.</li><li>Must be able to obtain and maintain a NAC(T3) Background Investigation and drug test. Must be able to obtain and maintain facility credentials/authorization. May be required to obtain and maintain a secret clearance.</li></ul><p></p></section>

<p>Under general supervision, diagnoses and repairs surface and downhole electronic and mechanical systems problems while providing leadership and guidance to lower level technicians. Typically trains under a Principal Technician-Logging and Perforating to gain knowledge and experience in maintaining logging equipment and tools including some specialty equipment. Requires knowledge of surface systems, open and cased hole tools, and lab testing equipment. May assist in radiation record keeping. Visits field locations when needed to help solve equipment technical problems and follows up on equipment repair at headquarters. Job tasks, correctly performed, impact indirectly on cost containment, efficiency, profitability or operations. Consequences of error are easily measured and can be confined. Skills are typically acquire through 2 years experience as a Technician-Logging and Perforating, or equivalent experience in electronics and successful completion of the Ft Worth maintenance school.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>High School/Secondary</li><li>2 + Years Experience</li><li>Skills: Maintenance Technician, Electrical Technician</li></ul>

<p>We are looking for the right people - people who want to innovate, achieve, grow and lead. We attract and retain the best talent by investing in our employees and empowering them to develop themselves and their careers. Experience the challenges, rewards and opportunity of working for one of the world's largest providers of products and services to the global energy industry. Job Duties Under general supervision, repairs and performs maintenance on conventional tools, down-hole tools and other equipment used in the application for down-hole tools. Areas of specialization may include: mechanical aptitude, pressure testing, surface equipment, and down-hole tools. Performs maintenance, inspects surface equipment, and perform repairs. Assembles and disassembles down-hole tools. Skills are typically acquired through a high school diploma or similar education and 6-12 months experience as a Tool Technician I or equivalent tool technician training. Basic computer skills are preferred. Licensure to drive commercial equipment may be required. Given the nature of oil field service work, the ability to communicate effectively with others is necessary. The ability to perform basic mathematical calculations involving addition, subtraction, multiplication, and division is required. Basic reading comprehension and writing skills are required. Basic computer skills are preferred. Promotes safety awareness and environmental consciousness, and complies with all applicable safety and environmental procedures and regulations. Ensures compliance with Health, Safety, and Environmental (HSE) regulations and guidelines. Promotes and takes an active part in the quality improvement process.</p><p><strong>Desired Candidate Profile</strong></p><p>Skills : Maintenance Technician , Slickline<br>Education : High School/Secondary<br>Employment Type : Full Time Salaried Employee<br>Location : Al Khobar, Eastern Province, Saudi Arabia</p><p>Skills are typically acquired through a high school diploma or similar education and 6-12 months experience as a Tool Technician I or equivalent tool technician training. Basic computer skills are preferred. Licensure to drive commercial equipment may be required. Given the nature of oil field service work, the ability to communicate effectively with others is necessary. The ability to perform basic mathematical calculations involving addition, subtraction, multiplication, and division is required. Basic reading comprehension and writing skills are required. Basic computer skills are preferred. Promotes safety awareness and environmental consciousness, and complies with all applicable safety and environmental procedures and regulations. Ensures compliance with Health, Safety, and Environmental (HSE) regulations and guidelines. Promotes and takes an active part in the quality improvement process.</p>

<p>We are looking for a skilled Industrial Electronics Technician responsible for installing, troubleshooting, repairing, calibrating, and maintaining electronic systems and industrial control equipment. The role requires strong hands-on experience with electronic circuits, instrumentation, control systems, and industrial electrical/electronic equipment.</p><p>Key Responsibilities</p><ul><li>Install, inspect, test, troubleshoot, and repair industrial electronic equipment and control systems.</li><li>Diagnose faults in electronic circuits, PLC systems, sensors, controllers, transmitters, and related equipment.</li><li>Perform preventive and corrective maintenance on electronic and instrumentation systems.</li><li>Read and interpret electrical/electronic schematics, wiring diagrams, and technical drawings.</li><li>Test electronic components using multimeters, oscilloscopes, signal generators, and other diagnostic equipment.</li><li>Calibrate and maintain sensors, transmitters, controllers, and other measurement devices.</li><li>Troubleshoot PLC I/O systems, control panels, variable frequency drives (VFDs), and industrial automation equipment.</li><li>Identify faulty components and perform component-level or board-level repairs where applicable.</li><li>Maintain accurate records of inspections, repairs, maintenance activities, and equipment performance.</li><li>Support installation and commissioning of new electronic and control equipment.</li><li>Ensure all work complies with applicable safety procedures, technical standards, and site requirements.</li><li>Coordinate with electrical, instrumentation, maintenance, and operations teams to resolve equipment issues.</li><li>Maintain tools, test equipment, spare parts, and technical documentation.</li></ul><p><strong>Desired Candidate Profile</strong></p><p>Diploma or Technical Certificate in Electronics, Industrial Electronics, Instrumentation, Electrical Engineering , or a related field. Minimum 5 years of relevant experience as an Industrial Electronics Technician, Electronics Technician, Instrument Technician, or similar role. Hands-on experience troubleshooting industrial electronic and control systems. Good knowledge of electronic components, circuits, sensors, control systems, and instrumentation. Experience with PLC systems, VFDs, control panels, and industrial automation is preferred. Ability to read electrical/electronic schematics and technical drawings. Experience using electronic testing and diagnostic instruments. Knowledge of preventive and corrective maintenance practices. Strong troubleshooting and problem-solving skills. Good understanding of industrial safety procedures. Experience in Oil &amp; Gas, petrochemical, manufacturing, power generation, or other industrial environments is preferred.</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The technician is responsible for maintaining and repairing various home appliances, Air Conditions, and products to ensure optimal functionality and efficiency when visiting customers and carrying out requested maintenance jobs as per the job orders received from the Customer service, application, or supervisor.</p><p>Perform service maintenance jobs to ensure appliances, AC longevity as received from the Customer service, Application.</p><p>Diagnose and troubleshoot technical issues promptly, using appropriate tools and techniques.</p><p>Repair or replace defective parts or components as needed to restore functionality.</p><p>Document all maintenance and repair activities accurately for record-keeping purposes.</p><p>Collaborate with other team members and departments to coordinate maintenance schedules and tasks.</p><p>In the case where additional problems are identified during inspection, the technicians shall report it to their supervisors immediately, for further advice.</p><p>Stay updated on industry trends, best practices, and technological advancements relevant to the field and product.</p><p>Adhere to safety protocols and regulations at all times to prevent accidents and injuries.</p><p>Provide training and guidance to assistant technicians or new hires as required.</p><p>Respond to emergency service calls and prioritize tasks based on urgency and impact on operations.</p><p>Test-run the unit to ensure satisfactory completion of the service job.</p><p>Ensure the job is completed to the customer s satisfaction accordingly.</p><p>Ensure that effective necessary tools, consumables, and spares are available in the service vehicle.</p><p>Coordinate with the respective assistant technician &amp; ensure the Vehicles Preventive Maintenance Checklist is properly implemented.</p><p>Strictly adhere to prescribed safety practices &amp; use appropriate Personal Protective Equipment provided.</p><p>Maintain good relationships with customers through professional behavior, performance, and keep excellent hygiene.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Technical, AC &amp; Refrigeration Engineering, Electrical, Mechanical Diploma or Certification from a recognized institution.</li><li>Minimum 1- 2 years of experience in a similar field.</li><li>Proven experience as a technician or similar role, preferably in the relevant industry.</li><li>Strong knowledge of mechanical, electrical, or electronic systems and components.</li><li>Proficiency in reading technical manuals, schematics, and blueprints.</li><li>Excellent problem-solving skills and attention to detail.</li><li>Ability to work independently with minimal supervision and as part of a team.</li><li>Effective communication skills, both verbal and written.</li><li>Willingness to undergo additional training and certifications as needed.</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The A/C Technician is responsible for the installation, operation, maintenance, troubleshooting, and repair of heating, ventilation, air conditioning (HVAC), refrigeration, and ventilation systems throughout the hotel. The role ensures that all guest rooms, public areas, restaurants, banquet facilities, back-of-house areas, and critical mechanical systems operate efficiently and reliably, maintaining the highest standards of guest comfort, safety, energy efficiency, and luxury hospitality.</p><p>Key Responsibilities</p><p>Preventive Maintenance</p><ul><li>Perform preventive maintenance on HVAC, refrigeration, ventilation, and chilled water systems according to the hotel's maintenance schedule.</li><li>Inspect, clean, lubricate, and adjust mechanical equipment to ensure optimal performance.</li><li>Replace filters, belts, bearings, motors, thermostats, valves, and other HVAC components as required.</li><li>Maintain accurate preventive maintenance records and equipment history.</li></ul><p>Repairs and Troubleshooting</p><ul><li>Diagnose and repair faults in air conditioning, refrigeration, ventilation, fan coil units (FCUs), air handling units (AHUs), package units, split systems, pumps, and associated controls.</li><li>Respond promptly to guest room and operational maintenance requests.</li><li>Troubleshoot electrical and mechanical faults using appropriate testing equipment.</li><li>Minimize equipment downtime through timely repairs and effective problem-solving.</li></ul><p>Guest Room &amp; Public Area Support</p><ul><li>Ensure guest room air conditioning systems operate efficiently and quietly.</li><li>Maintain comfortable temperature and humidity levels throughout the hotel.</li><li>Respond immediately to guest complaints related to air conditioning or ventilation.</li><li>Coordinate maintenance activities to minimize disruption to guests and hotel operations.</li></ul><p>Plant Room Operations</p><ul><li>Monitor the performance of chillers, cooling towers, pumps, heat exchangers, and mechanical ventilation systems.</li><li>Record equipment operating parameters and report abnormalities.</li><li>Assist with plant shutdowns, startups, and seasonal maintenance activities.</li><li>Support emergency repairs to critical HVAC infrastructure.</li></ul><p>Energy Management</p><ul><li>Assist in implementing energy conservation initiatives.</li><li>Monitor HVAC performance to improve operational efficiency and reduce energy consumption.</li><li>Recommend equipment upgrades and maintenance improvements that enhance system reliability and sustainability.</li><li>Support the hotel's environmental and sustainability objectives.</li></ul><p>Safety &amp; Compliance</p><ul><li>Follow all occupational health and safety procedures during maintenance activities.</li><li>Ensure compliance with local building codes, environmental regulations, and refrigerant handling requirements.</li><li>Use appropriate personal protective equipment (PPE) at all times.</li><li>Report unsafe conditions and equipment defects immediately.</li><li>Maintain proper handling, recovery, storage, and disposal of refrigerants in accordance with applicable regulations.</li></ul><p>Documentation</p><ul><li>Complete work orders accurately and promptly through the hotel's maintenance management system.</li><li>Maintain maintenance logs, inspection records, and equipment documentation.</li><li>Report recurring equipment issues and recommend corrective actions.</li><li>Assist in maintaining spare parts inventory.</li></ul><p>Teamwork</p><ul><li>Coordinate with Engineering colleagues and other hotel departments during maintenance activities.</li><li>Support banquet, conference, and special event operations by ensuring HVAC systems are functioning properly.</li><li>Assist with general engineering duties when required.</li><li>Participate in emergency response procedures and technical standby coverage.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Diploma or technical certification in HVAC, Air Conditioning, Refrigeration, Mechanical Engineering, or a related trade.</li><li>Valid HVAC or refrigeration certification/license, where required by local regulations.</li><li>Minimum 3 years of HVAC maintenance experience, preferably in a luxury hotel, resort, hospital, or large commercial facility.</li><li>Experience working with Building Management Systems (BMS) is an advantage.</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph">Product Repair &amp; Modification Technician - Structures<p> </p> <p> </p> <p> <b>Company:</b> </p>Boeing Saudi Arabia Limited<p> </p> <p> </p> <p>At Boeing, we are all innovators on a mission to connect, protect, explore and inspire. From the sea bed to outer space, you ll learn and grow, contributing to work that shapes the world. Find your future with us.<br> </p> <p>An opportunity has become available to join Boeing Saudi Arabia as a Structural Modification technician.<br> </p> <p>This position is part of the on-site F-15 modification team, supporting upgrades of the RSAF F-15SA aircraft based at Dhahran. Working as part of four teams you will perform structural modifications utilizing engineering drawings and Technical Orders. We are offering an opportunity for you to join a team responsible for updating one of the worlds most operationally tasked fighters.<br> </p> <p> <b>Role Description:</b> </p> <p>You will perform structural modifications and assist in maintenance activities, fault diagnosis and disturbed system functional tests. You will work with peers to perform tasks associated with aircraft safe handling and maintenance. Candidates will be responsible to ensure established process adherence, accurate and timely work recording and contractual/regulatory compliance. </p> <p> </p> <p> <b>Responsibilities</b>: </p> <ul> <li> <p>Assembles, disassembles and/or structurally modifies systems by changing, removing, replacing, or upgrading aerospace vehicle components to implement change.</p> </li> <li> <p>Oversees/completes assembly/disassembly or overhaul.</p> </li> <li> <p>Configures aerospace vehicles and test equipment.</p> </li> <li> <p>Troubleshoots complex aircraft systems to isolate structural faults and repair faulty components within guidelines published in authorized maintenance documents.</p> </li> <li> <p>Performs validation/verification testing of systems and components.</p> </li> <li> <p>Documents procedures and established processes to ensure contractual and regulatory compliance.</p> </li> <li> <p>Inspects components and verifies repairs for flight worthiness requirements.</p> </li> </ul> <p> </p> <p> <b>What we are looking for:</b> </p> <ul> <li> <p>3+ years prior Mechanical/structural experience in a production or MRO facility is essential.</p> </li> <li> <p>Demonstrable proficiency in the interpretation of engineering drawings and technical data.</p> </li> <li> <p>1+ years of experience supporting military aircraft modifications.</p> </li> <li> <p>Strong communication skills (both written and oral).</p> </li> <li> <p>Working with limited supervision.</p> </li> <li> <p>Good organizational skills.</p> </li> <li> <p>A high level of written and verbal communication and interpersonal skills are required.</p> </li> <li> <p>Attention to detail. </p> </li> </ul> <p> </p> <p>Employer is willing to sponsor applicants for employment visa status</p> <p> </p> <p>Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.</p> <p> </p> <p>This requisition is for an international, locally hired position in Dharan, Saudi Arabia. Benefits and pay are determined at the local level and are not part of Boeing U.S.-based payroll and will commensurate with experience and qualifications and in accordance with applicable Saudi Arabia law. Employment is subject to the candidate's ability to satisfy all Saudi Arabia labor and immigration formalities.</p> <p> </p> <p> </p> <p> <b> <b> <b>Language Requirements:</b> </b> </b> </p> <p> </p>Not Applicable<p> </p> <p> </p> <p> <b>Education:</b> </p>Not Applicable<p> </p> <p> </p> <p> <b>Relocation:</b> </p>Relocation assistance is not a negotiable benefit for this position.<p> </p> <p> </p> <p> <b>Security Clearance:</b> </p>This position does not require a Security Clearance.<p> </p> <p> </p> <p> <b>Visa Sponsorship:</b> </p>Employer willing to sponsor applicants for employment visa status.<p> </p> <p> </p> <p> <b>Contingent Upon Award Program</b> </p>This position is not contingent upon program award<p> </p> <p> </p> <p> <b>Shift:</b> </p>Not a Shift Worker (Saudi Arabia)</div></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph">Overview We Are PepsiCo PepsiCo products are enjoyed by consumers more than one billion times a day in more than 200 countries and territories around the world. PepsiCo generated more than $79 billion in net revenue in 2021, driven by a complementary beverage and convenient foods portfolio that includes LAY S , DORITOS , CHEETOS , GATORADE , PEPSI , QUAKER and more. PepsiCo's product portfolio includes a wide range of enjoyable foods and beverages, including many iconic brands that generate more than $1 billion each in estimated annual retail sales. Guiding PepsiCo is our vision to Be the Global Leader in Beverages and Convenient Foods by Winning with PepsiCo Positive (pep+). pep+ is our strategic end-to-end transformation that puts sustainability and human capital at the center of how we will create value and growth by operating within planetary boundaries and inspiring positive change for planet and people. Our employees drive our culture. No two days are the same; we are dynamic and full of passionate teams that embrace new ideas through our collaborative spirit. At PepsiCo, we know that our company can only succeed when our associates and the society we serve flourishes. We are committed to fostering a diverse workforce by creating a collaborative, equitable and inclusive space where everyone, regardless of what we look like, where we come from or who we love, has a voice. At PepsiCo we create a Space to be y( )u. Learn more about our culture and life at PepsiCo: https://stories.pepsicojobs.com/ Join PepsiCo, dare to transform. Responsibilities Job Overview: Execution of assigned tasks and work orders related to all types of Mechanical maintenance mechanical corrective, preventive maintenance and any engineering related works in safe, good and cost-effective manner within the given time frames. Responsibilities: The overall responsibility for performing assigned Work Orders as well as any other tasks by the supervisor. Identify the root causes of major and repeating problems. Respond to all technical problems within the assigned area and making sure proper actions are identified and taken. Solving technical problems and identifying the actions and parts requirement. (Knowledge on spare parts description, availability and required critical spare parts.) Daily contact with Direct Managers/peers/Supervisors Decision making on utilisation of spare parts, required corrective and preventive actions for breakdowns. Executing the maintenance schedules/ plans to maintain the plant equipment with-in given engineering standards. Achieve and maintain the Line availability (Technical Efficiency) &amp; Equipment readiness. Ensure proper controls for all hazards and risks associated with all activities are in place and EHS targets are achieved. Operates all equipment s related to utilities sections. Supervise contracted labours during maintenance activities and follow safety and company standard. Performs required daily parameters readings, monitoring s and as required by supervisor. Operates all equipment related to Utilities sections. Performs required daily parameters reading and monitoring and as assigned by the supervisor. Daily reporting of all shift activities. Identify opportunities and support initiatives to improve production processes as assigned by Maintenance Supervisor in coordination with production personnel to improve quality, productivity, enhance safety or drive down costs. Support the execution of the site Maintenance and Reliability M&amp;R Strategy to achieve World Class maintenance status. Execute and follow the assigned actions related to PEMM (PepsiCo Maintenance Methodology) tool and MIAP (Maintenance Improvement Action Plan). Support the implementation of Reliability Engineering tools and techniques to achieve Maintenance and Reliability M&amp;R KPI's. Support executing Continuous Improvement CI initiatives and Failure Analysis techniques (e.g. Root Cause Analysis RCA). Attend the Maintenance forum meetings to share Maintenance Performance, Best Practices, Challenges and achievements. Maintain and implement AIB standards. Maintain accurate SAP-PM records and updates for all assigned Work Orders. Adhere to EHS and QFS policies and standards. To implement, sustain and participate in the continual improvement of the EHS Management System (MS) at area of responsibility in accordance to the legislations, PepsiCo GEHSMS and relevant EHS standards, ensuring proper controls for all hazards and risks associated with all activities/areas are in place and EHS targets are achieved. Qualifications: Knowledge / Skill Diploma in Mechanical Engineering. Mechanical safety standards awareness. Maintenance Planning &amp; execution system. Can read and understand plans, diagrams, layouts and schematic drawings (in the field of qualification). Have knowledge in operating and automation systems. Technical knowledge for refrigeration plant cooling system, troubleshooting &amp; M. (For AC technician). Knowledge in any Maintenance Management software (CMMS) is a plus is preferred. Has good command of English language (Reading, Writing and Speaking). Have Quality and Food Safety QFS systems and policies knowledge. Environment, Health and Safety EHS systems and policies knowledge and system basic awareness. Knowledgeable in SAP system Able to do basic electro mechanical works independently. Have a general knowledge and ability to use computers (MS office applications) Qualifications Experience Minimum 2 years industrial experience. Hands-on experience in mechanical equipment maintenance, thermal and hydraulic machines, HVAC systems, rotating and conveying mechanisms, etc. Equipment Troubleshooting hands on experience. Competencies Malfunctions and technical trouble shooting ability. Can lead modifications and small projects Capable of executing planned activities. Able to do mechanical works independently. A team player with good collaboration and communications skills. Have leadership skills, can support and motivate others and interact with different departments. Flexible in tolerating to changes and accepting new ideas. Analytical thinker Can coordinate with suppliers and contractors for requested parts and works with RFQ.</div></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>perform maintenance on auto vehicles such as oil, fluid and tire changes, wheel balancing &amp; assist our more experienced auto mechanics with more complicated repairs</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>vocational diploma or equivalent.</li><li>2 years</li><li>mechanical aptitude and skill set in car maintenance</li><li>Ability to perform day-to-day physical tasks</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li>Conduct thorough inspections of pump systems to identify issues and ensure optimal performance, preventing costly downtime.</li><li>Perform routine maintenance, including lubrication, alignment, and replacement of worn components, to extend the life of pump systems.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>High school diploma or equivalent; technical certification in pump technology or mechanical engineering is preferred.</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Under general supervision, performs preventive/predictive maintenance, diagnostics, and repairing a variety of electronic and/or electrical equipment relative to their assigned location.</p><p>Performs function testing to verify equipment readiness after maintenance.</p><p>Must be proficient in understanding/interpreting electronic and/or electrical schematics/drawings/prints.</p><p>Performs work within a variety of Halliburton specific software and hardware.</p><p>Must possess advanced computer literacy.</p><p>Ensures adherence, accurate input, and maintenance of data into Halliburton&amp;aposs system of record.</p><p>This role is responsible for following specific and detailed work processes within the Halliburton Management System (HMS) during daily job activities.</p><p>Performs own work and assists others as directed.</p><p>Responsible for ensuring duties are performed in a safe, efficient, and effective manner.</p><p>Job tasks, correctly performed, impact indirectly on cost containment, efficiency, profitability or operations.</p><p>Consequences of error are easily measured and can be confined.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>A high school diploma or equivalent and 1 year of experience in an electrical field are required. A Technical Certification is preferred.</p><p></p></section>

<p>The opportunity Executes attentively incoming inspection protocols as assigned and report all the findings and results in the SAP. Performs labeling of all components with a component identification tag if components are compliant through inspection. Restrains the components at the dedicated area when fails the inspection and initiate the supplier non-conformance management process to report back the issue to the suppliers.</p><p>How you ll make an impact</p><ul><li>Ensure a safe environment by implementing HSE requirements</li><li>Conduct visual/dimensional inspection of purchased parts, materials, samples and assemblies</li><li>Document inspection results as required</li><li>Report to quality engineer /Quality manager on any deviations observed during incoming inspection</li><li>Create quality inspection records, apply the visual indications on the inspected parts as per procedures</li><li>Create Nonconformity reports and keeping track of the status</li><li>Record and track daily IQC inspection backlog</li><li>Maintain traceability of component materials as to inspection status</li><li>Handle materials in accordance to procedures and prevent mix-ups, damage or other adverse effects.</li><li>Log/track materials through receiving inspection process and SAP entries</li><li>Record transactions and move materials to accepted material area</li><li>Communicate inspection results to Quality engineers and other relevant persons.</li><li>Refer to verify assembly documentation accuracy, read engineering drawings etc.</li><li>Performs any other projects or duties that may be assigned.</li><li>Collaborate with other departments for deviation detection, root cause analysis and correction measures implementation.</li><li>Support failure analysis, trouble shooting, site visit, reporting &amp; quality process, use A3 template in analysis</li><li>Employee shall also carry out any tasks that are assigned by management necessary to fulfil the job requirements.</li></ul><p><strong>Desired Candidate Profile</strong></p><p>Diploma in Electrical, Mechanical technical courses</p><p>0-2 Years experience</p><p>Quality Control/Quality Assurance</p><p>Knowledge to read drawings</p><p>MS office and computer skills</p><p>Hands on Inspection of material and use of tools to measurement</p><p>English Communication skills</p><p>Influencing Continuous Improvement and decision making and time Management.</p>

<p class="isSelectedEnd">We are looking for a creative interior designer with a high aesthetic sense and the ability to transform clients' ideas and needs into practical and distinctive spaces, to contribute to the development of our residential and commercial projects from the idea stage to the preparation of final designs, with experience in furniture design.</p><p class="isSelectedEnd">Tasks and Responsibilities:</p><ul><li>Preparing design ideas and concepts for residential and commercial projects.</li><li>Developing plans and space distribution to achieve function and beauty.</li><li>Preparing design mood boards and selecting colors, materials, furniture, and lighting.</li><li>Designing and rendering 3D scenes with high quality and realism.</li><li>Preparing executive plans and necessary details for the project.</li><li>Preparing design presentations and presenting ideas clearly and professionally.</li><li>Coordinating with suppliers and contractors and ensuring that the implementation conforms to the approved design.</li><li>Visiting sites when necessary and monitoring the progress of work and the quality of execution.</li><li>Making adjustments based on client feedback and managing design stages within the timeline.</li><li>Continuously researching modern design materials, solutions, and trends.</li></ul><div><p class="isSelectedEnd"><br></p><p class="isSelectedEnd">Required Qualifications:</p><ul><li>Practical experience in designing residential and commercial projects.</li><li>Proficiency in AutoCAD and 3D design and realistic rendering software.</li></ul><div><br></div></div><div><p class="isSelectedEnd">Preferred:</p><ul><li>Experience in field supervision and follow-up.</li><li>Knowledge of suppliers and materials available in the local market.</li><li>Ability to prepare preliminary bills of materials, specifications, and quantities.</li></ul></div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Under general supervision, provides specific multi-PSL job design, well support, and post job analysis to customers in a designated area. Develops and maintains personal relationships with the technical customer base and provides highly technical expert support to the ATP and TP staff. May go on critical jobs where service quality or job complexity could be an issue. May maintain job schedules and liaise with customers on technical issues including performance review and process improvements to better support the needs of the customer. May work with the local Business Development personnel to insure customers are kept current on technology. May initiate, review, and close Correction, Prevention, Improvement (CPI)s pertaining to Technology. This position is a mentoring role over the Associate Technical Professionals (ATPs) in a service center.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Completion of an undergraduate degree in Engineering required.</li><li>Minimum of 2 years of experience in a related field.</li><li>Diversity Training</li><li>Possession of a Professional Engineer license.</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>We are looking for the right people - people who want to innovate, achieve, grow and lead. We attract and retain the best talent by investing in our employees and empowering them to develop themselves and their careers. Experience the challenges, rewards and opportunity of working for one of the world's largest providers of products and services to the global energy industry.</p><p>Job Duties</p><p>Under general supervision, provides specific multi-PSL job design, well support, and post job analysis to customers in a designated area. Develops and maintains personal relationships with the technical customer base and provides highly technical expert support to the ATP and TP staff. May go on critical jobs where service quality or job complexity could be an issue. May maintain job schedules and liaise with customers on technical issues including performance review and process improvements to better support the needs of the customer. May work with the local Business Development personnel to insure customers are kept current on technology. May initiate, review, and close Correction, Prevention, Improvement (CPI)s pertaining to Technology. This position is a mentoring role over the Associate Technical Professionals (ATPs) in a service center.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph">Completion of an undergraduate degree in Engineering required. Minimum of 2 years of experience in a related field. Diversity Training Possession of a Professional Engineer license.</p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Your role Your mission is to deliver skilled on-site service that keeps our customers equipment performing reliably and safely. You use your expertise to repair, maintain, and support the technology they depend on. Through your work, you help customers secure the uptime and performance they need to run their operations with confidence. You join the Customer Center Service team and report into the Operations Manager. Your mission is to deliver skilled on-site service that keeps our customers equipment performing reliably and safely. You use your expertise to repair, maintain, and support the technology they depend on. Through your work, you help customers secure the uptime and performance they need to run their operations with confidence. You join the Customer Center Service team and report into the Operations Manager. Your day-to-day Conduct planned and ad hoc visits to inspect, service, troubleshoot, and repair various technical systems. You will also diagnose any issues to prevent equipment downtime. Perform installations, ensure safety compliance, and document activities. Be the on-site contact, providing service recommendations and addressing customer needs promptly. Your compensation and benefits We offer compensation that reflects the skills, experience, and responsibilities of the role. Pay also depends on the country where the job role is based, as compensation practices vary across our markets. During the recruitment process, we share clear information about the pay and benefits for your location, so you know what to expect before moving forward. Your location You will be part of our customer center in Jubail, Saudi Arabia (SA). You join a field service team that works close to our customers, where most of your time is spent traveling within your assigned area to support them on-site. Why it is great to work with us Your career grows through your skills, your curiosity, and the people you work with. As a Field Service Engineer, you work close to our customers and see firsthand how our technology performs in real conditions. You build your expertise by solving problems on-site, sharing knowledge with colleagues, and learning from every service task. We focus on long term development and support you as you explore new ways to improve how we keep our customers equipment running. Innovation guides how we think and act we test, learn, and apply new insights to make our service work even better. You make a meaningful impact by taking ownership of your work and using your ideas to help our customers operate with confidence, supported by leaders who trust and empower you</p></div></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>SDEC is one of the leading equipment distributors and custom industrial equipment solution provider. SDEC has a dynamic portfolio of products which is determined by the needs of our customers. SDEC culture is characterized by high customer orientation with a long-term view of relationships. We are inviting applications from candidates who have experience working as Team Leader.</p><p>Job Purpose: Maintains and repairs industrial machinery and equipment using hoists, lift trucks &amp; hand and power tools. Troubleshoots problems and repairs or replace worn or broken parts as necessary. Performance is aimed at ensuring a minimum downtime of the equipment.</p><p>Main Responsibilities</p><ul><li>Ability to read and understand electrical drawings.</li><li>Perform voltage changes on generators based on customer requirements.</li><li>Re-wire, adjust, upgrade/install control panels and voltage regulators</li><li>Determine necessary parts and special tools required to complete jobs.</li><li>Diagnose issues with the Alternator.</li><li>Adjust speed controls and various settings.</li><li>Run load bank tests on the generator.</li><li>Work closely with the Workshop Supervisor and Service Manager on project progress, estimates.</li><li>Maintain a safe work environment at work sites.</li><li>Use electronic software and tools to diagnose, repair and reprogram generator controllers and related parameters.</li><li>Install, maintain, and enhance electrical systems and components, including fuses, lights, and wiring.</li><li>Inspect, test, and diagnose issues with electrical systems and components</li><li>Perform all work in a manner that meets and follows electrical codes, blueprints, and standards.</li><li>Test electrical systems and components to ensure proper functioning</li><li>Complete required documentation of repairs and service information.</li><li>Ensure adequate inventory of necessary supplies and parts.</li><li>Calibrate equipment to provided specifications.</li><li>Perform preventative maintenance on electrical systems and components.</li><li>Troubleshoot problems and make timely repairs.</li><li>Thorough and timely completion of job documentation.</li><li>Provide inputs to improve, update and add to the Work Instruction Manual.</li></ul><p>HSE Responsibilities</p><ul><li>Adhere to follow all company Quality, Health, Safety, And Environmental (QHSE) policies, procedures, and legal requirements.</li><li>Promptly identify and report unsafe conditions, incidents, and near misses to the appropriate supervisor or QHSE team.</li><li>Properly use, maintain, and store personal protective equipment (PPE) and safety tools as required by the job.</li><li>Attend and actively participate in mandatory Safety inductions, HSE trainings, safety meetings, emergency drills and root cause investigations.</li><li>Follow established emergency response procedures, including evacuation plans, fire response, and first aid if trained.</li><li>Follow protocols to minimize environmental impact, including proper waste disposal and reporting spills or leaks.</li><li>Provide suggestions to enhance Quality, Health, Safety and Environmental procedures and take responsibility and initiatives for continual improvement.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><h2>Qualifications &amp; Relevant Certifications</h2><ul><li>Technical Diploma/associate degree with major Electrical</li><li>Technical training certificates from OEMs</li><li>Driving License preferably GCC driving license</li></ul><h2>Knowledge Skills &amp; Experience</h2><ul><li>Working knowledge of Electrical components of genset like alternator, control panel</li><li>Troubleshooting and field repair of large sophisticated high or low speed diesel driven generators, low, medium, and high voltage 13.8KV as well as control devices e.g., auto-start, auto load share, auto-parallel, auto-stop, synchronizing.</li><li>Programming of controllers like Deep Sea and Synchronization systems</li><li>Practical knowledge of Mechanical, Thermal, Hydraulic, Electronics principles.</li><li>Perform welding, fabrication, and calibration as needed.</li><li>Thorough knowledge of Diesel Engine, Fuel, Lubrication, Cooling and Exhaust systems particularly of the rating used for Power generation and applications in Oil &amp; Gas industry.</li><li>Experience in servicing and repairing alternators of different name brands like Stamford, Marelli, Leroy-Somer, Mecc Alte, and Marelli along with control panel components like ATS, MCCB, MCB, PLCs and busbars for applications like synchronization.</li><li>Highly proficient in Technical English.</li><li>Proficiency with MS Office Suite particularly MS Outlook and Calendar</li><li>A strong commitment to all health and safety guidelines.</li><li>Effective communication in English.</li><li>Analytical and systematic problem-solving approach.</li><li>Prior experience in customer-facing roles is preferred</li><li>Years of relevant experience: 0-3</li></ul><p></p></section>