وظائف للحاصلين على دبلوم صنايع - الجبيل السعودية

<h3 >About the Role</h3> <p >TASNEE is seeking a <strong >Specialist II, Mechanical</strong> to join its team in <strong >Al Jubail</strong>. This full-time position is central to developing robust maintenance strategies, conducting detailed inspections, and preparing comprehensive plans for various mechanical systems and equipment. The role focuses on ensuring operational reliability and efficiency through expert mechanical oversight and intervention.</p> <h3 >Role Overview</h3> <p >The <strong >Specialist II, Mechanical</strong> will be responsible for preparing maintenance procedures, conducting thorough inspections, and developing equipment/system-specific inspection and preventive maintenance checklists. Key equipment areas include Diesel engines, Lifting Equipment (such as overhead cranes, forklifts, and reach stackers), and HVAC systems. This role also involves developing Statements of Work (SOW), reviewing spare parts, conducting technical evaluations of proposals, performing Risk Assessments (PH&amp;A), and MOC Evaluations.</p> <h3 >Core Duties and Tasks</h3> <ul > <li >Conduct detailed inspections of Diesel engines, HVAC, and lifting equipment, formulating precise repair recommendations.</li> <li >Develop equipment/system-specific task lists, PM Plans, CTI/TRA, and operational procedures for various mechanical assets.</li> <li >Prepare Statements of Work (SOW) for repair activities, Turnaround Maintenance (TAM), and Annual Rated Contracts (ARC).</li> <li >Perform technical evaluations of contracts and proposals, and assess materials required for maintenance and repair works.</li> <li >Conduct survey and condition-based inspections for Diesel engines, HVAC, lifting equipment, and other department-related equipment.</li> <li >Review spare parts and initiate requests for spare parts/Material Data Governance (MDG).</li> <li >Execute Risk Assessments, Root Cause Analysis, and incident investigations, including the preparation of failure reports.</li> <li >Prepare Capital Expenses Budget (Capex) and manage Management of Change (MOC) activities from initiation through closeout.</li> <li >Review and update engineering drawings and technical documents.</li> <li >Perform criticality assessment/revaluation of assets and address reliability and integrity actions for department-scope equipment.</li> <li >Coordinate and supervise project handover/takeover activities, maintain records, and update equipment master data in SAP.</li> <li >Act as an onsite lead during critical work or operational conditions.</li> </ul> <h3 >Qualifications and Experience</h3> <ul > <li >A Diploma in Mechanical / Electromechanical or a Bachelor’s degree in Mechanical / Electromechanical Engineering.</li> <li >A minimum of <strong >13 years of relevant experience</strong> in mechanical maintenance, reliability, or a related field.</li> </ul> <h3 >Location and Work Type</h3> <p >This is a <strong >full-time position</strong> based in <strong >Al Jubail</strong>, Saudi Arabia. The role requires a proactive approach to mechanical systems management and involves acting as an onsite lead during critical operational periods to ensure smooth and safe execution of tasks.</p> <h3 >Application Information</h3> <p >Candidates who meet the specified qualifications and experience are encouraged to apply for this role.</p>

<h3 >About eXtra (United Electronics Co.)</h3> <p >eXtra (United Electronics Co.) is a leading retailer committed to providing a comprehensive shopping experience. The company focuses on delivering value and service to its customers across various locations.</p> <h3 >The Role of Sales Consultant</h3> <p >eXtra is seeking customer-focused and motivated individuals to join its store team as a <strong >Sales Consultant</strong>. This full-time position is based in Al Jubail, within the Eastern region, and is integral to supporting the store's sales and customer service objectives.</p> <h3 >Key Responsibilities</h3> <ul > <li >Deliver an exceptional customer experience and provide professional sales support.</li> <li >Assist customers in selecting products and services that best meet their specific needs.</li> <li >Achieve personal and store sales targets while contributing to overall store performance.</li> <li >Maintain product displays, ensure pricing accuracy, and uphold store presentation standards.</li> <li >Support inventory management activities, including stock replenishment and cycle counts.</li> <li >Participate in promotional campaigns and seasonal sales activities as required.</li> <li >Adhere to all company policies, operational procedures, and safety standards.</li> </ul> <h3 >Required Qualifications and Experience</h3> <ul > <li >High School diploma or equivalent is required; a Diploma or Bachelor’s degree is preferred.</li> <li >0–2 years of experience in retail sales or customer service is essential for this role.</li> </ul> <h3 >Essential Skills and Attributes</h3> <ul > <li >Basic knowledge of computer systems and Point of Sale (POS) systems.</li> <li >Demonstrated passion for sales and providing excellent customer service.</li> <li >Flexibility to work various shifts, including weekends and during peak seasons.</li> </ul> <h3 >Commitment to the Role</h3> <p >This full-time position requires a commitment to contributing to a dynamic retail environment. Candidates should be prepared to engage actively with customers and support store operations effectively.</p>

<h3 >About KBR, Inc. and the Role</h3> <p >KBR, Inc. is a company driven by innovators and thinkers, united by the goal of improving the world responsibly and safely. We attract a diverse workforce and top global talent, with expertise thriving on creativity, resourcefulness, and collaboration. KBR is seeking a <strong >Static Technician III</strong> to join its team in <strong >Jubail, Eastern, Saudi Arabia</strong>. This is a full-time position critical to maintaining the integrity and functionality of industrial assets.</p> <h3 >Role Overview</h3> <p >The Static Technician III is responsible for ensuring static equipment and piping systems are maintained in optimal condition. This role involves leading a team in the installation, maintenance, and repair of various static equipment and process piping systems, ensuring all operations comply with established procedures and safety standards.</p> <h3 >Key Responsibilities</h3> <ul > <li >Receive and execute work instructions, drawings, and specifications as provided by the Supervisor.</li> <li >Lead and guide a team of Technicians in performing assigned tasks.</li> <li >Utilize appropriate tools and equipment, including operating heavy-duty specialized tools from the Central tool room.</li> <li >Operate basic machine tools such as grinders, power saws, drill presses, and threading machines.</li> <li >Perform all installation and maintenance works in accordance with SATORP procedures and guidelines.</li> <li >Carry out necessary testing, including Hydro and Pneumatic tests.</li> <li >Obtain required work permits before commencing any work.</li> <li >Maintain strict compliance with SATORP safety standards.</li> <li >Consult with the Supervisor for any technical issues or guidance.</li> <li >Ensure good housekeeping practices are maintained during and after job completion.</li> <li >Achieve job completion to specified quality and schedule according to company standards and requirements.</li> <li >Comply with all Safety, Health, and Environment standards and procedures.</li> <li >Report all near misses, unsafe conditions, and acts promptly.</li> <li >Attend scheduled Safety and Technical training sessions.</li> </ul> <h3 >Qualifications and Experience</h3> <ul > <li >Minimum of 4 years of experience in Oil &amp; Gas maintenance for High School graduates.</li> <li >Minimum of 2 years of experience in Oil &amp; Gas maintenance for Diploma holders.</li> <li >Hold a valid certification issued by a recognized third-party certification body or an accredited Saudi institute, attesting to the individual’s qualifications and competency to perform the works.</li> </ul> <h3 >Required Skills and Attributes</h3> <ul > <li >Strong technical understanding of maintenance management in Oil &amp; Gas Facilities.</li> <li >Well-organized and proactive approach to work.</li> <li >Excellent communication skills for effective team leadership and coordination.</li> </ul> <h3 >Commitment to Safety and Operational Excellence</h3> <p >This role demands a strong commitment to operational excellence and adherence to stringent safety protocols. The Static Technician III will operate within a framework that prioritizes safety, environmental protection, and continuous improvement through regular training and proactive reporting of incidents and unsafe conditions.</p>

The QC Inspector - Instrument performs inspection and testing of instrumentation construction activities to verify compliance with drawings, specifications, and applicable standards.<br><br>SECTION II: Job Analysis <br><br>Duties & Responsibilities<br><br> Perform in-process and final inspections on instrumentation installation works Witness loop checks, calibration, and instrument testing activities per the ITP Verify instrument installation, tubing, and wiring against approved drawings and specifications Verify materials and instruments against material certificates and specifications Record inspection results and raise Non-Conformance Reports as required Coordinate hold points and inspections with client/third-party inspectors Maintain inspection records, checklists, and daily QC reports Verify calibration status of test and measuring equipment used on site Support punch-list generation and verification of closure for instrumentation works Ensure work fronts comply with approved method statements and instrumentation standards Support preparation of quality documentation for instrumentation handover dossiers<br><br>Requirements<br><br>SECTION III: Performance Indicators<br><br>Evaluated Based on<br><br> Inspection accuracy and completeness Timely identification and reporting of non-conformances First-time inspection pass rate on assigned work fronts Adherence to inspection schedules/hold points Quality of inspection documentation<br><br>SECTION IV: Required Skills & Abilities <br><br>Core Competencies<br><br>Attention to Detail Integrity Analytical Thinking Communication Skills Time Management<br><br>Technical Skills<br><br> Instrumentation Inspection Techniques Reading Loop Diagrams & Instrument Datasheets Calibration & Loop Checking Verification Inspection & Test Plans (ITPs) Measuring & Testing Equipment Use QC Documentation & Reporting<br><br>SECTION V: Required Experience and Education <br><br>Experience<br><br> 5-8 years of experience as a QC Inspector on instrumentation construction projects<br><br>Education<br><br> Diploma or Bachelor's degree in Instrumentation Engineering QC/inspection certification preferred

The QC Inspector - Instrument performs inspection and testing of instrumentation construction activities to verify compliance with drawings, specifications, and applicable standards.<br><br>SECTION II: Job Analysis <br><br>Duties & Responsibilities<br><br> Perform in-process and final inspections on instrumentation installation works Witness loop checks, calibration, and instrument testing activities per the ITP Verify instrument installation, tubing, and wiring against approved drawings and specifications Verify materials and instruments against material certificates and specifications Record inspection results and raise Non-Conformance Reports as required Coordinate hold points and inspections with client/third-party inspectors Maintain inspection records, checklists, and daily QC reports Verify calibration status of test and measuring equipment used on site Support punch-list generation and verification of closure for instrumentation works Ensure work fronts comply with approved method statements and instrumentation standards Support preparation of quality documentation for instrumentation handover dossiers<br><br>Requirements<br><br>SECTION III: Performance Indicators<br><br>Evaluated Based on<br><br> Inspection accuracy and completeness Timely identification and reporting of non-conformances First-time inspection pass rate on assigned work fronts Adherence to inspection schedules/hold points Quality of inspection documentation<br><br>SECTION IV: Required Skills & Abilities <br><br>Core Competencies<br><br>Attention to Detail Integrity Analytical Thinking Communication Skills Time Management<br><br>Technical Skills<br><br> Instrumentation Inspection Techniques Reading Loop Diagrams & Instrument Datasheets Calibration & Loop Checking Verification Inspection & Test Plans (ITPs) Measuring & Testing Equipment Use QC Documentation & Reporting<br><br>SECTION V: Required Experience and Education <br><br>Experience<br><br> 5-8 years of experience as a QC Inspector on instrumentation construction projects<br><br>Education<br><br> Diploma or Bachelor's degree in Instrumentation Engineering QC/inspection certification preferred

<div dir="rtl"><h3 >نبذة عن الدور</h3> <p >تعلن شركة محمد عبدالله الحماد التجارية عن حاجتها لمساعد إداري للانضمام إلى فريقها في الجبيل، المنطقة الشرقية. يهدف هذا الدور بدوام كامل إلى دعم الرئيس المباشر في تنظيم الأعمال الإدارية اليومية، ومتابعة تنفيذ القرارات، وتنسيق المواعيد والاجتماعات لضمان سير العمل بكفاءة وفعالية.</p> <h3 >المهام والمسؤوليات الرئيسية</h3> <ul > <li >تنفيذ التعليمات الإدارية الصادرة عن الرئيس المباشر ومتابعة تنفيذ القرارات الإدارية.</li> <li >فتح وفرز البريد الورقي وتوزيعه على الأقسام المعنية.</li> <li >التعامل مع البريد الإلكتروني والرد عليه وفقاً لتوجيهات الرئيس المباشر.</li> <li >إنجاز أعمال الطباعة المختلفة المطلوبة.</li> <li >الرد على الاستفسارات والمكالمات الهاتفية الواردة.</li> <li >تنظيم وحفظ الملفات والمعاملات بطريقة تسهل الرجوع إليها.</li> <li >تنسيق وتنظيم اجتماعات الرئيس المباشر واجتماعات موظفي الوحدة التنظيمية.</li> <li >المشاركة في الاجتماعات وتدوين وتوثيق محاضرها.</li> <li >طباعة وتوزيع محاضر الاجتماعات الخاصة بالرئيس المباشر على الأطراف المشاركة.</li> </ul> <h3 >المؤهلات والخبرات</h3> <p >يتطلب هذا الدور خبرة عملية تتراوح من <strong >0 إلى 1 سنة</strong> في مجال السكرتارية أو الأعمال الإدارية. يُفضل أن يكون المرشح حاصلاً على شهادة دبلوم أو بكالوريوس في تخصص ذي صلة، مع إظهار القدرة على التعلم السريع والتكيف مع بيئة العمل.</p> <h3 >المهارات والكفاءات</h3> <ul > <li >مهارات تنظيمية وإدارية ممتازة للتعامل مع المهام المتعددة.</li> <li >القدرة على إدارة الوقت وتحديد الأولويات بفعالية.</li> <li >مهارات تواصل كتابية وشفوية قوية باللغة العربية.</li> <li >إتقان استخدام برامج الحاسب الآلي الأساسية (مثل حزمة Microsoft Office).</li> <li >القدرة على العمل بشكل مستقل وكجزء من فريق.</li> <li >الدقة والاهتمام بالتفاصيل في إنجاز المهام.</li> </ul> <h3 >موقع العمل ونوع الدوام</h3> <p >يقع مقر العمل لهذه الوظيفة في مدينة <strong >الجبيل</strong> بالمنطقة الشرقية، والمطلوب هو دوام كامل. تلتزم الشركة بتوفير بيئة عمل داعمة ومحفزة.</p> <h3 >معلومات إضافية</h3> <p >الراتب لهذه الوظيفة <strong >غير معلن</strong> وسيتم تحديده بناءً على المؤهلات والخبرة خلال عملية المقابلة. ندعو المهتمين والذين يستوفون المتطلبات المذكورة أعلاه إلى تقديم طلباتهم.</p></div>

<h3 >About KBR and the Opportunity</h3> <p >KBR, Inc. is a global company comprised of innovators, thinkers, creators, explorers, volunteers, and dreamers, all sharing the common goal of improving the world responsibly and safely. We attract a diverse workforce and top talent, as our expertise is driven by creativity, resourcefulness, and collaboration. KBR is currently seeking a dedicated <strong >Electrical Technician III</strong> to join our team in Al Jubail, located in the Eastern region, for a full-time position.</p> <h3 >Role Purpose</h3> <p >The Electrical Technician III is responsible for executing maintenance activities with a primary focus on ensuring compliance with preventive and predictive maintenance plans. This role also involves the efficient and effective management of breakdown maintenance for electrical systems, equipment, and facilities within the designated area of influence, consistently applying best and safest maintenance practices.</p> <h3 >Key Responsibilities</h3> <ul > <li >Execute day-to-day electrical maintenance activities on all electrical systems, plant, equipment, and facilities within the designated area of responsibility.</li> <li >Ensure strict compliance with SATORP's Safety and Quality procedures during the execution of all electrical maintenance activities.</li> <li >Oversee the proper execution of work and monitor activities involved in routine maintenance.</li> <li >Carry out repairing and troubleshooting activities on electrical assets in a timely and quality manner to enhance the availability and reliability of these systems.</li> <li >Receive work directions from the respective Electrical Supervisor concerning electrical systems maintenance orders and requests.</li> <li >Follow up on electrical maintenance work progress and submit regular progress reports to the Electrical Supervisor. Maintain records of daily maintenance works against planned maintenance programs and prepare work completion reports as applicable.</li> <li >Enforce SATORP’s policies, procedures, and regulations, ensuring all safety measures and precautions are strictly considered and implemented during maintenance works.</li> <li >Perform Preventive Maintenance on HV and LV switchgear and control gears, including testing of electronic protection relays, power circuit breakers, bus bars, contactors, motor starters, and Automatic Transfer Switches (ATS).</li> <li >Conduct readings of partial discharge capacitors in HV motors.</li> <li >Perform on-line analysis of current signatures for motors.</li> <li >Execute testing on all types of transformers.</li> <li >Provide support for switchgear operations in electrical substations when requested.</li> <li >Perform other related duties as assigned by the respective Electrical Leader.</li> </ul> <h3 >Required Qualifications and Experience</h3> <ul > <li >A Diploma in Engineering or an equivalent qualification is required.</li> <li >Minimum of <strong >4 years’ experience</strong> in Oil &amp; Gas maintenance for High School graduates, or a minimum of <strong >2 years’ experience</strong> in Oil &amp; Gas maintenance for Diploma holders.</li> <li >Hold a valid certification issued by a recognized third-party certification body or an accredited Saudi institute, attesting to the individual’s qualifications and competency to perform the works.</li> </ul> <h3 >Essential Skills and Attributes</h3> <ul > <li >Strong technical understanding of maintenance management within Oil &amp; Gas Facilities.</li> <li >Well-organized and proactive approach to work.</li> <li >Excellent communication skills.</li> </ul> <h3 >Application Information</h3> <p >KBR is dedicated to attracting a diverse workforce and the best minds. We encourage qualified candidates who meet the specified requirements to apply for this full-time Electrical Technician III position in Al Jubail.</p>

SECTION I: Job Summary <br><br>The QC Inspector - Structural performs inspection and testing of structural steel fabrication and erection activities to verify compliance with drawings, specifications, and applicable codes and standards.<br><br>SECTION II: Job Analysis <br><br>Duties & Responsibilities<br><br> Perform in-process and final inspections on structural steel fabrication and erection works Witness structural bolting, welding, and alignment checks per the ITP Verify structural steel installation against approved drawings, erection plans, and tolerances Verify materials (structural steel, bolts, coatings) against material certificates and specifications Record inspection results and raise Non-Conformance Reports as required Coordinate hold points and inspections with client/third-party inspectors Maintain inspection records, checklists, and daily QC reports Verify calibration status of measuring and test equipment used on site Support punch-list generation and verification of closure for structural works Ensure work fronts comply with approved method statements and structural codes (AISC, etc.) Support preparation of quality documentation for structural handover dossiers<br><br>Requirements<br><br>SECTION III: Performance Indicators<br><br>Evaluated Based on<br><br> Inspection accuracy and completeness Timely identification and reporting of non-conformances First-time inspection pass rate on assigned work fronts Adherence to inspection schedules/hold points Quality of inspection documentation<br><br>SECTION IV: Required Skills & Abilities <br><br>Core Competencies<br><br>Attention to Detail Integrity Analytical Thinking Communication Skills Time Management<br><br>Technical Skills<br><br> Structural Steel Inspection Techniques Reading Structural/Erection Drawings Bolting & Welding Inspection Standards (Structural) Inspection & Test Plans (ITPs) Measuring & Alignment Equipment Use QC Documentation & Reporting<br><br>SECTION V: Required Experience and Education <br><br>Experience<br><br> 5-8 years of experience as a QC Inspector on structural steel construction projects<br><br>Education<br><br> Diploma or Bachelor's degree in Civil/Structural Engineering QC/inspection certification preferred

SECTION I: Job Summary <br><br>The QC Inspector - Mechanical performs inspection and testing of mechanical equipment installation activities to verify compliance with drawings, specifications, and applicable codes and standards.<br><br>SECTION II: Job Analysis <br><br>Duties & Responsibilities<br><br> Perform in-process and final inspections on mechanical equipment installation works (pumps, vessels, packages, structural skids) Verify equipment installation, alignment, and grouting against approved drawings and vendor specifications Witness mechanical running tests, alignment checks, and equipment box-up activities per the ITP Verify materials and equipment against material certificates, vendor data, and specifications Record inspection results and raise Non-Conformance Reports as required Coordinate hold points and inspections with client/third-party inspectors Maintain inspection records, checklists, and daily QC reports Verify calibration status of measuring and test equipment used on site Support punch-list generation and verification of closure for mechanical works Ensure work fronts comply with approved method statements and mechanical equipment standards Support preparation of quality documentation for mechanical handover dossiers<br><br>Requirements<br><br>SECTION III: Performance Indicators<br><br>Evaluated Based on<br><br> Inspection accuracy and completeness Timely identification and reporting of non-conformances First-time inspection pass rate on assigned work fronts Adherence to inspection schedules/hold points Quality of inspection documentation<br><br>SECTION IV: Required Skills & Abilities <br><br>Core Competencies<br><br>Attention to Detail Integrity Analytical Thinking Communication Skills Time Management<br><br>Technical Skills<br><br> Mechanical Equipment Inspection Techniques Reading Mechanical/Equipment Drawings & Vendor Data Equipment Alignment & Grouting Inspection Inspection & Test Plans (ITPs) Measuring & Alignment Equipment Use QC Documentation & Reporting<br><br>SECTION V: Required Experience and Education <br><br>Experience<br><br> 5-8 years of experience as a QC Inspector on mechanical equipment installation projects<br><br>Education<br><br> Diploma or Bachelor's degree in Mechanical Engineering QC/inspection certification preferred

SECTION I: Job Summary <br><br>The QC Inspector - Insulation performs inspection and testing of thermal/mechanical insulation and cladding installation activities to verify compliance with drawings, specifications, and applicable standards.<br><br>SECTION II: Job Analysis <br><br>Duties & Responsibilities<br><br> Perform in-process and final inspections on insulation and cladding installation works Verify insulation material, thickness, and installation method against approved specifications Witness moisture barrier, banding, and cladding installation checks per the ITP Verify materials and batch certificates against approved specifications Record inspection results and raise Non-Conformance Reports as required Coordinate hold points and inspections with client/third-party inspectors Maintain inspection records, checklists, and daily QC reports Verify calibration status of measuring and test equipment used on site Support punch-list generation and verification of closure for insulation works Ensure work fronts comply with approved method statements and insulation standards Support preparation of quality documentation for insulation handover dossiers<br><br>Requirements<br><br>SECTION III: Performance Indicators<br><br>Evaluated Based on<br><br> Inspection accuracy and completeness Timely identification and reporting of non-conformances First-time inspection pass rate on assigned work fronts Adherence to inspection schedules/hold points Quality of inspection documentation<br><br>SECTION IV: Required Skills & Abilities <br><br>Core Competencies<br><br>Attention to Detail Integrity Analytical Thinking Communication Skills Time Management<br><br>Technical Skills<br><br> Insulation & Cladding Inspection Techniques Insulation Material & Thickness Verification Weatherproofing/Cladding Installation Standards Inspection & Test Plans (ITPs) Measuring & Testing Equipment Use QC Documentation & Reporting<br><br>SECTION V: Required Experience and Education <br><br>Experience<br><br> 5-8 years of experience as a QC Inspector on insulation/cladding application projects<br><br>Education<br><br> Diploma or Bachelor's degree in Mechanical Engineering QC/inspection certification preferred

SECTION I: Job Summary <br><br>The QC Inspector - Piping (UG) performs inspection and testing of underground piping installation activities, including trenching, bedding, coating, and backfill, to verify compliance with drawings, specifications, and applicable codes.<br><br>SECTION II: Job Analysis <br><br>Duties & Responsibilities<br><br> Perform in-process and final inspections on underground piping installation works Witness trench excavation, pipe bedding, coating/wrapping, and backfill activities per the ITP Verify underground pipe alignment, depth, and joint integrity against approved drawings Witness hydrotests, holiday testing (coating integrity), and cathodic protection checks as required Verify materials (pipe, coating, bedding material) against material certificates and specifications Record inspection results and raise Non-Conformance Reports as required Coordinate hold points and inspections with client/third-party inspectors prior to backfill Maintain inspection records, checklists, and daily QC reports Verify calibration status of measuring and test equipment used on site Support punch-list generation and verification of closure for underground piping works Support preparation of quality documentation for underground piping handover dossiers<br><br>Requirements<br><br>SECTION III: Performance Indicators<br><br>Evaluated Based on<br><br> Inspection accuracy and completeness Timely identification and reporting of non-conformances Hold point compliance prior to backfill Adherence to inspection schedules Quality of inspection documentation<br><br>SECTION IV: Required Skills & Abilities <br><br>Core Competencies<br><br>Attention to Detail Integrity Analytical Thinking Communication Skills Time Management<br><br>Technical Skills<br><br> Underground Piping Inspection Techniques Trenching, Bedding & Backfill Inspection Coating/Wrapping & Holiday Testing Inspection & Test Plans (ITPs) Measuring & Testing Equipment Use QC Documentation & Reporting<br><br>SECTION V: Required Experience and Education <br><br>Experience<br><br> 5-8 years of experience as a QC Inspector on underground piping/utilities construction projects<br><br>Education<br><br> Diploma or Bachelor's degree in Mechanical/Civil Engineering QC/inspection certification preferred

SECTION I: Job Summary <br><br>The QC Inspector - Coating performs inspection and testing of surface preparation and protective coating/painting activities to verify compliance with drawings, specifications, and applicable standards.<br><br>SECTION II: Job Analysis <br><br>Duties & Responsibilities<br><br> Perform in-process and final inspections on surface preparation and coating/painting works Verify surface preparation (blasting profile, cleanliness) against specifications (e.g., SSPC/NACE standards) Witness coating application, DFT/WFT checks, holiday testing, and adhesion tests per the ITP Verify environmental conditions (humidity, dew point, temperature) prior to coating application Verify materials and batch certificates against approved coating specifications Record inspection results and raise Non-Conformance Reports as required Coordinate hold points and inspections with client/third-party inspectors Maintain inspection records, checklists, and daily QC reports Verify calibration status of measuring and test equipment (gauges, holiday detectors) used on site Support punch-list generation and verification of closure for coating works Support preparation of quality documentation for coating handover dossiers<br><br>Requirements<br><br>SECTION III: Performance Indicators<br><br>Evaluated Based on<br><br> Inspection accuracy and completeness Timely identification and reporting of non-conformances First-time inspection pass rate on assigned work fronts Adherence to inspection schedules/hold points Quality of inspection documentation<br><br>SECTION IV: Required Skills & Abilities <br><br>Core Competencies<br><br>Attention to Detail Integrity Analytical Thinking Communication Skills Time Management<br><br>Technical Skills<br><br> Coating/Painting Inspection Techniques Surface Preparation Standards (SSPC/NACE) DFT/WFT, Holiday & Adhesion Testing Inspection & Test Plans (ITPs) Measuring & Testing Equipment Use QC Documentation & Reporting<br><br>SECTION V: Required Experience and Education <br><br>Experience<br><br> 5-8 years of experience as a QC Inspector on coating/painting application projects<br><br>Education<br><br> Diploma or Bachelor's degree in Mechanical/Civil Engineering NACE/coating inspection certification (e.g., NACE Level II) preferred

SECTION I: Job Summary <br><br>The QC Inspector - Fireproofing performs inspection and testing of passive fireproofing application activities to verify compliance with drawings, specifications, and applicable codes and standards.<br><br>SECTION II: Job Analysis <br><br>Duties & Responsibilities<br><br> Perform in-process and final inspections on fireproofing application works Verify surface preparation, primer, and fireproofing material application against specifications Witness thickness (DFT/WFT) checks and adhesion tests per the ITP Verify materials and batch certificates against approved specifications Record inspection results and raise Non-Conformance Reports as required Coordinate hold points and inspections with client/third-party inspectors Maintain inspection records, checklists, and daily QC reports Verify calibration status of measuring and test equipment (thickness gauges) used on site Support punch-list generation and verification of closure for fireproofing works Ensure work fronts comply with approved method statements and fireproofing standards Support preparation of quality documentation for fireproofing handover dossiers<br><br>Requirements<br><br>SECTION III: Performance Indicators<br><br>Evaluated Based on<br><br> Inspection accuracy and completeness Timely identification and reporting of non-conformances First-time inspection pass rate on assigned work fronts Adherence to inspection schedules/hold points Quality of inspection documentation<br><br>SECTION IV: Required Skills & Abilities <br><br>Core Competencies<br><br>Attention to Detail Integrity Analytical Thinking Communication Skills Time Management<br><br>Technical Skills<br><br> Fireproofing/Passive Fire Protection Inspection Techniques Surface Preparation & Coating Application Standards Thickness (DFT/WFT) & Adhesion Testing Inspection & Test Plans (ITPs) Measuring & Testing Equipment Use QC Documentation & Reporting<br><br>SECTION V: Required Experience and Education <br><br>Experience<br><br> 5-8 years of experience as a QC Inspector on fireproofing/coating application projects<br><br>Education<br><br> Diploma or Bachelor's degree in Mechanical/Civil Engineering NACE/coating inspection certification preferred

SECTION I: Job Summary <br><br>The QC Inspector - Structural performs inspection and testing of structural steel fabrication and erection activities to verify compliance with drawings, specifications, and applicable codes and standards.<br><br>SECTION II: Job Analysis <br><br>Duties & Responsibilities<br><br> Perform in-process and final inspections on structural steel fabrication and erection works Witness structural bolting, welding, and alignment checks per the ITP Verify structural steel installation against approved drawings, erection plans, and tolerances Verify materials (structural steel, bolts, coatings) against material certificates and specifications Record inspection results and raise Non-Conformance Reports as required Coordinate hold points and inspections with client/third-party inspectors Maintain inspection records, checklists, and daily QC reports Verify calibration status of measuring and test equipment used on site Support punch-list generation and verification of closure for structural works Ensure work fronts comply with approved method statements and structural codes (AISC, etc.) Support preparation of quality documentation for structural handover dossiers<br><br>Requirements<br><br>SECTION III: Performance Indicators<br><br>Evaluated Based on<br><br> Inspection accuracy and completeness Timely identification and reporting of non-conformances First-time inspection pass rate on assigned work fronts Adherence to inspection schedules/hold points Quality of inspection documentation<br><br>SECTION IV: Required Skills & Abilities <br><br>Core Competencies<br><br>Attention to Detail Integrity Analytical Thinking Communication Skills Time Management<br><br>Technical Skills<br><br> Structural Steel Inspection Techniques Reading Structural/Erection Drawings Bolting & Welding Inspection Standards (Structural) Inspection & Test Plans (ITPs) Measuring & Alignment Equipment Use QC Documentation & Reporting<br><br>SECTION V: Required Experience and Education <br><br>Experience<br><br> 5-8 years of experience as a QC Inspector on structural steel construction projects<br><br>Education<br><br> Diploma or Bachelor's degree in Civil/Structural Engineering QC/inspection certification preferred

KSA & Bahrain Sales Manager<br>About the Company Nano H2O™ SWRO membranes deliver industry-leading salt rejection and up to 20% more flow than conventional RO membranes, significantly reducing the cost of desalination while producing superior water quality. Nano H2O™ BWRO membranes are engineered to lower OPEX through the intrinsic anti-fouling and durable membrane properties resulting in a lower total cost of plant ownership.<br>About the Role We’re looking for a proactive, results-driven Sales Manager to execute our go-to-market strategy and grow our presence in the municipal and industrial water treatment market.<br>Key Responsibilities Own and execute the go-to-market strategy across your region. Drive top-line revenue by developing new partner relationships and managing the full commercial cycle. Develop and execute sales expansion plans in consultation with senior management. Communicate sales and technical concepts clearly to regional EPCs/OEMs and Owners/Operators of RO desalination plants. Ensure products are approved for use within municipal and industrial projects. Identify and manage opportunities within your region to meet and exceed sales targets. Manage your pipeline, maintain detailed customer and partner data, and forecast accurately using Salesforce, Hub Spot, or other CRM tools. Lead contract negotiations and maintain strong business relationships with existing and prospective partners. Identify, recruit, and manage strategic channel partners. Work closely with Marketing, Technical Service, Engineering, and R&D to translate customer pain points into technical solutions. Conduct technical sales presentations and deliver clear, actionable market and competitive insights.<br>Qualifications & Experience Required Bachelor’s degree in engineering, chemistry, environmental science, or business with technical experience.5–10 years of experience in sales, marketing, or business development in the industrial water treatment industry. Deep understanding of RO systems, membrane filtration, or related fluid separation technologies. Strong client network and proven sales success in sectors like municipal and industrial desalination, wastewater, power, petrochemical, or refining. Experience in business with government organizations in KSA. Fluent in English and Arabic with excellent verbal, written, and presentation skills. Proficient in Microsoft Office and CRM systems like Salesforce or Hub Spot. Valid driver's license in KSA and ability to travel.<br>Preferred Strong network of OEMs, service providers, engineering firms, and industry consultants. Experience in equipment sales for municipal and industrial desalination, petrochemical, power, and refinery industries. Familiarity with ultrafiltration, reverse osmosis, and ion exchange resin landscape, competitive product offerings, and emerging industry trends.

<h3 >About the Electrical Technician II Role</h3> <p >KBR Saudi Arabia is seeking an <strong >Electrical Technician II</strong> to join our team in <strong >Al Jubail</strong>. This full-time role involves leading, supervising, and coordinating day-to-day Instrument maintenance activities, ensuring operational efficiency and compliance with safety and quality standards.</p> <h3 >About KBR Sustainable Technology Solutions</h3> <p >KBR Sustainable Technology Solutions (STS) delivers comprehensive and value-added solutions across the entire asset life cycle. These offerings include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design capabilities, and smart solutions aimed at optimizing planned and operating assets.</p> <h3 >Key Responsibilities</h3> <ul > <li >Lead, supervise, and coordinate day-to-day Instrument maintenance activities.</li> <li >Develop maintenance activities for all Instrument systems, plant, equipment, and facilities within the designated area.</li> <li >Act as the focal point for daily Instrument maintenance execution plans.</li> <li >Ensure technicians comply with SATORP's Safety and Quality procedures during maintenance activities.</li> <li >Conduct frequent site visits to ensure proper work execution and check on routine maintenance activities.</li> <li >Lead technicians assigned to the area.</li> <li >Receive work directions from the Instrument foreman and translate these directions into actions.</li> <li >Follow up on Instrument maintenance work progress and submit regular progress reports with recommendations.</li> <li >Keep records of daily maintenance works against planned maintenance programs and prepare work completion reports, where applicable.</li> <li >Work closely with the Instrument foreman in recommending and implementing changes aimed at improving the availability and reliability of Instrument/instrument systems.</li> <li >Assist in implementing engineering modifications and enhancements to Instrument equipment.</li> <li >Enforce SATORP’s policies, procedures, and regulations and ensure that all safety measures and precautions are strictly considered and taken care of during conducting onsite maintenance works.</li> <li >Ensure that personnel have the skills, training, and all needed resources, equipment, and tools to conduct routine maintenance activities in a safe and effective manner, according to the contract terms and conditions.</li> </ul> <h3 >Qualifications and Certifications</h3> <ul > <li ><strong >Experience:</strong> <ul > <li >Minimum 6 years’ experience in Oil &amp; Gas maintenance with a High School qualification.</li> <li >Minimum 4 years’ experience in Oil &amp; Gas maintenance with a Diploma.</li> </ul> </li> <li ><strong >Certifications:</strong> <ul > <li >Hold a valid certification issued by a recognized third-party certification body or an accredited Saudi institute, attesting to the individual’s qualifications and competency to perform the works.</li> </ul> </li> </ul> <h3 >Technical Knowledge and Essential Skills</h3> <ul > <li ><strong >Technical Knowledge:</strong> <ul > <li >Strong technical understanding of maintenance management of Oil &amp; Gas Facilities.</li> <li >Strong knowledge of maintaining and repairing Instrument systems.</li> <li >Good knowledge in Instrument equipment design, installation, and maintenance.</li> <li >Strong knowledge of maintaining and repairing Mechanical and electro-hydraulic systems.</li> <li >Good knowledge of preventive and predictive maintenance principles and working procedures.</li> <li >Strong knowledge of standards, procedures, and regulations to develop activities taking care of Health, Safety, and Environmental preservation.</li> </ul> </li> <li ><strong >Skills &amp; Abilities:</strong> <ul > <li >Proactive Safety aptitude and behavior.</li> <li >Strong communication and people skills.</li> <li >Well organized and proactive.</li> <li >Proven leadership skills with large organizations.</li> <li >Maturity of judgment under pressure and ability to resolve problems.</li> <li >Strategic management skills.</li> <li >Ability to perform work under pressure and meet tight deadlines.</li> <li >Synergic and capable of handling multiple tasks.</li> <li >Ability to achieve business results working in a multi-cultural environment.</li> <li >Flexibility to travel internationally and live in KSA.</li> </ul> </li> </ul> <h3 >Work Location</h3> <p >This full-time position is based in <strong >Al Jubail, Saudi Arabia</strong>. Qualified candidates are encouraged to apply.</p>

SECTION I: Job Summary <br><br>The QC Inspector - Piping performs inspection and testing of piping fabrication and installation activities to verify compliance with isometrics, welding procedures, and applicable codes and standards.<br><br>SECTION II: Job Analysis <br><br>Duties & Responsibilities<br><br> Perform in-process and final inspections on piping fabrication and installation works Witness hydrotests, NDE activities (RT/UT/PT/MT), and other required tests per the ITP Verify pipe fit-up, alignment, and welding against approved isometrics and WPS Verify materials, spools, and fittings against material certificates and specifications Record inspection results and raise Non-Conformance Reports as required Coordinate hold points and inspections with client/third-party inspectors Maintain inspection records, checklists, and daily QC reports Verify calibration status of measuring and test equipment used on site Support punch-list generation and verification of closure for piping works Ensure work fronts comply with approved method statements and piping codes (ASME B31.3) Support preparation of quality documentation for piping handover dossiers<br><br>Requirements<br><br>SECTION III: Performance Indicators<br><br>Evaluated Based on<br><br> Inspection accuracy and completeness Timely identification and reporting of non-conformances First-time weld/inspection acceptance rate Adherence to inspection schedules/hold points Quality of inspection documentation<br><br>SECTION IV: Required Skills & Abilities<br><br>Core Competencies<br><br> Attention to Detail Integrity Analytical Thinking Communication Skills Time Management<br><br>Technical Skills<br><br> Piping Inspection Techniques Reading Isometrics, P&IDs & Welding Maps Welding Inspection & NDE Awareness (RT/UT/PT/MT) Inspection & Test Plans (ITPs) Measuring & Testing Equipment Use QC Documentation & Reporting<br><br>SECTION V: Required Experience and Education<br><br>Experience<br><br> 5-8 years of experience as a QC Inspector on piping construction/fabrication projects<br><br>Education<br><br> Diploma or Bachelor's degree in Mechanical Engineering QC/inspection certification (e.g., CSWIP, CWI) preferred<br><br>SECTION VI: LEVEL OF AUTHORITY<br><br>Supervisory / Managerial: No supervisory responsibility.<br><br>Financial: No financial or budget authority.<br><br>SECTION VII: MISCELLANEOUS JOB-SPECIFIC REQUIREMENTS<br><br>General Profile / Specifications:<br><br> Field-based role requiring daily presence on active piping work fronts Exposure to site/construction conditions May require shift work or extended hours to cover inspection hold points

<h3 >About the Role</h3> <p >Matar Al-Baqami Holding is seeking a Customer Service Officer to join the Supply Chain team in Al Jubail, Eastern Province. This full-time role focuses on supporting logistics and delivery operations by coordinating daily activities between customers, drivers, dispatchers, and logistics personnel. The objective is to ensure efficient truck utilization, timely deliveries, and effective customer communication.</p> <h3 >Key Responsibilities</h3> <ul > <li >Monitor daily truck movements using GPS tracking systems, including departures, arrivals, unloading, and returns.</li> <li >Identify and follow up on delayed, stationary, or route-deviating vehicles with drivers, escalating significant issues to relevant stakeholders.</li> <li >Control trip turnaround times, maintaining records of delays and recurring issues, and recommending corrective actions.</li> <li >Contact customers prior to dispatch to confirm delivery readiness, verify storage capacity, and manage postponement requests.</li> <li >Serve as the primary coordination point between customers, drivers, dispatchers, and logistics teams, communicating schedules, delays, and delivery instructions.</li> <li >Support daily dispatch and delivery plans, coordinating truck availability and following up on delayed or rescheduled deliveries.</li> <li >Manage exceptions by identifying issues affecting delivery performance and taking immediate action to minimize disruption, escalating unresolved issues as needed.</li> <li >Prepare daily and weekly logistics reports on planned versus completed deliveries, turnaround times, delays, and operational exceptions.</li> </ul> <h3 >Qualifications and Experience</h3> <ul > <li >A Diploma or Bachelor's degree in Logistics, Supply Chain Management, Business Administration, or a related field is preferred.</li> <li >Proven experience in customer service, logistics operations, logistics coordination, or a similar role.</li> </ul> <h3 >Required Skills and Competencies</h3> <ul > <li >Strong coordination, organizational, and problem-solving abilities.</li> <li >Knowledge of logistics operations, transportation processes, and inventory management principles.</li> <li >Effective customer service and stakeholder management skills.</li> <li >Ability to communicate effectively with customers, drivers, vendors, and internal teams.</li> <li >High attention to detail and accuracy in record-keeping.</li> <li >Ability to manage priorities in a fast-paced operational environment.</li> <li >Understanding of health and safety practices within logistics and warehouse operations.</li> <li >Proficiency in tracking, reporting, and monitoring operational performance.</li> </ul> <h3 >Work Environment</h3> <p >This role is based in Al Jubail, Eastern Province, and operates within a dynamic supply chain team focused on daily logistics and delivery coordination.</p>

KSA & Bahrain Sales Manager<br>About the Company Nano H2O™ SWRO membranes deliver industry-leading salt rejection and up to 20% more flow than conventional RO membranes, significantly reducing the cost of desalination while producing superior water quality. Nano H2O™ BWRO membranes are engineered to lower OPEX through the intrinsic anti-fouling and durable membrane properties resulting in a lower total cost of plant ownership.<br>About the Role We’re looking for a proactive, results-driven Sales Manager to execute our go-to-market strategy and grow our presence in the municipal and industrial water treatment market.<br>Key Responsibilities Own and execute the go-to-market strategy across your region. Drive top-line revenue by developing new partner relationships and managing the full commercial cycle. Develop and execute sales expansion plans in consultation with senior management. Communicate sales and technical concepts clearly to regional EPCs/OEMs and Owners/Operators of RO desalination plants. Ensure products are approved for use within municipal and industrial projects. Identify and manage opportunities within your region to meet and exceed sales targets. Manage your pipeline, maintain detailed customer and partner data, and forecast accurately using Salesforce, Hub Spot, or other CRM tools. Lead contract negotiations and maintain strong business relationships with existing and prospective partners. Identify, recruit, and manage strategic channel partners. Work closely with Marketing, Technical Service, Engineering, and R&D to translate customer pain points into technical solutions. Conduct technical sales presentations and deliver clear, actionable market and competitive insights.<br>Qualifications & Experience Required Bachelor’s degree in engineering, chemistry, environmental science, or business with technical experience.5–10 years of experience in sales, marketing, or business development in the industrial water treatment industry. Deep understanding of RO systems, membrane filtration, or related fluid separation technologies. Strong client network and proven sales success in sectors like municipal and industrial desalination, wastewater, power, petrochemical, or refining. Experience in business with government organizations in KSA. Fluent in English and Arabic with excellent verbal, written, and presentation skills. Proficient in Microsoft Office and CRM systems like Salesforce or Hub Spot. Valid driver's license in KSA and ability to travel.<br>Preferred Strong network of OEMs, service providers, engineering firms, and industry consultants. Experience in equipment sales for municipal and industrial desalination, petrochemical, power, and refinery industries. Familiarity with ultrafiltration, reverse osmosis, and ion exchange resin landscape, competitive product offerings, and emerging industry trends.

<h3 >Position Overview</h3> <p >Matar Al-Baqami Holding, a prominent leader in various industrial sectors since 1977, is seeking a dedicated <strong >Weight Bridge Operator</strong> to join its team in Al Jubail, Eastern Province. This full-time role is integral to our logistics and operations, focusing on the precise measurement of vehicle and material weights.</p> <h3 >Role Contribution</h3> <p >The Weight Bridge Operator plays a critical part in ensuring operational efficiency and compliance with industry regulations. This involves meticulous monitoring and management of weight measurement processes for all incoming and outgoing vehicles and materials at our facilities, maintaining accurate records essential for quality control and overall operational effectiveness.</p> <h3 >Core Responsibilities</h3> <ul > <li >Operate and manage the weight bridge to accurately weigh incoming and outgoing vehicles and materials.</li> <li >Ensure correct vehicle positioning on the scale and promptly record weight measurements.</li> <li >Maintain detailed records of weight measurements, including date, time, vehicle identification, and material type.</li> <li >Coordinate with drivers and logistics personnel to assist in loading and unloading processes.</li> <li >Monitor and report any discrepancies or irregularities in weight measurements to relevant authorities.</li> <li >Conduct routine maintenance checks on weight bridge equipment to ensure proper functionality.</li> <li >Ensure compliance with safety protocols and regulations related to weight measurement operations.</li> <li >Provide customer service to drivers and other personnel utilizing the scale.</li> <li >Assist in generating reports for management as required, highlighting trends and discrepancies.</li> </ul> <h3 >Required Qualifications</h3> <ul > <li >High school diploma or equivalent; relevant technical training is an advantage.</li> <li >Previous experience as a Weight Bridge Operator or in a similar role is preferred.</li> <li >Ability to operate weight bridge equipment and associated software effectively.</li> <li >Familiarity with safety regulations and procedures is desirable.</li> </ul> <h3 >Key Skills</h3> <ul > <li >Strong attention to detail and excellent numerical skills.</li> <li >Good communication skills and the ability to work effectively in a team-oriented environment.</li> <li >Basic computer skills for data entry and reporting.</li> </ul> <h3 >About Matar Al-Baqami Holding</h3> <p >Matar Al-Baqami Holding has been a leader in various industrial sectors since 1977, demonstrating a long-standing commitment to operational excellence. The company maintains high standards across its facilities and offers a stable environment for professionals. This role provides an opportunity to contribute to a well-established organization within the Eastern Province.</p>