وظائف مهندس ميكانيكا معدات ثقيلة - الظهران السعودية

<h3><strong>About the Role</strong></h3><p>Johns Hopkins Aramco Healthcare (JHAH) is seeking a <strong>Sterile Processing Technician 3</strong> to join its team in Dhahran. This full-time position is integral to the Sterile Processing Services (SPS) department, focusing on the comprehensive processing of reusable medical items and the preparation of case carts.</p><h3><strong>Role Overview and Impact</strong></h3><p>The Sterile Processing Technician 3 plays a critical role in ensuring patient well-being by meticulously managing reusable items through decontamination, sorting, packaging, sterilization, and storage procedures. The technician operates under established organizational and departmental policies and procedures, utilizing an approved electronic competency evaluation system to maintain high standards of care.</p><h3><strong>Key Responsibilities</strong></h3><ul><li>Handle complex sterilization cases, ensuring full compliance with clinical and organizational standards.</li><li>Support operational efficiency by coordinating resources and managing workflows within the SPS department.</li><li>Provide mentorship and guidance to intermediate and junior staff in sterile processing operations.</li><li>Coordinate effectively with clinical teams to support patient care through efficient sterile processing.</li><li>Plan and direct the processing, preparation, storing, dispensing, checking, and ordering of medical supplies and equipment.</li><li>Participate in and assist segment staff with function assessment, planning, implementation, and evaluation activities.</li><li>Identify safety hazards within the segment and implement necessary corrective actions to prevent accidents, applying quality assurance principles.</li><li>Prepare verbal and written reports for the segment head regarding the condition and functioning of assigned equipment, including sterilizers, aerators, washers, computer terminals, and printers.</li><li>Conduct routine inspections of all equipment used in the SPS area.</li><li>Attend required safety and in-service education programs.</li><li>Perform other related duties as requested to support departmental operations.</li></ul><h3><strong>Qualifications and Experience</strong></h3><p>Candidates for this position should possess <strong>7 years of relevant experience</strong> in sterile processing or a related field. A strong understanding of sterilization processes, compliance standards, and equipment operation is essential.</p><h3><strong>Work Environment and Schedule</strong></h3><p>This role is based within the Sterile Processing Services of Johns Hopkins Aramco Healthcare facilities in Dhahran. The work schedule is full-time and assigned to meet operational needs, which may include various shifts, on-call duties, and scheduled overtime.</p><h3><strong>Application Process</strong></h3><p>Interested candidates are encouraged to apply. Salary details for this position will be discussed during the interview process.</p>

Job Title – Gen AI - Data Scientist Company – TCS (MEA) Location – Dhahran, Saudi Arabia Job type – Full time About Us:Tata Consultancy Services (TCS) is an IT services, consulting and business solutions organization that has been partnering with many of the world’s largest businesses in their transformation journeys for over 50 years. TCS offers a consulting-led, cognitive powered, integrated portfolio of business, technology and engineering services and solutions. This is delivered through its unique Location Independent Agile™ delivery model, recognized as a benchmark of excellence in software development. A part of the Tata group, India's largest multinational business group, TCS has over 616,171 of the world’s best-trained consultants with 157 nationalities in 53 countries. For more information, visit www.tcs.com and follow TCS news at @TCS_News. Job Description:<br> Hands-on AI Engineer with strong implementation experience in Generative AI, Agentic AI, and Time Series ML models.<br> Key Skills:<br>Design and deploy Gen AI solutions using LLMs, RAG, embeddings, vector databases, and prompt engineering. Build Agentic AI applications using Lang Graph, Lang Chain, Crew AI, Auto Gen, including multi-agent workflows, tool calling, and memory. Develop and deploy Time Series forecasting and anomaly detection models. Production deployment using Python, Fast API, ML flow, Docker, Kubernetes, CI/CD, and cloud platforms (AWS/GCP/Azure).<br> Experience:<br> Proven end-to-end implementation of production-grade AI solutions.<br>Application Deadline: 30-August-2026 Privacy Note:https://www.tcs.com/connect-with-tcs/privacy-policy

<h3 >About BAE Systems Saudi Arabia</h3> <p >BAE Systems is the UK Government’s nominated Prime Contractor under Government-to-Government arrangements, providing equipment, support, and training to Saudi Arabia. BAE Systems Saudi Arabia maintains Royal Saudi Air Force (RSAF) aircraft and trains RSAF and Royal Saudi Naval Force personnel. The company is committed to supporting the Saudi Arabian National Agenda, including Saudisation and the development of Saudi National capability.</p> <h3 >The Aircraft Maintenance Supervisor Role</h3> <p >As an Aircraft Maintenance Supervisor based in Dhahran, you will play a key role in generating aircraft for the Royal Saudi Air Force customer. This full-time position operates within a challenging and rewarding environment, requiring a balance of complex engineering issue resolution with effective team management. The role involves significant interaction with various departments and organizations, including Supply Chain, Workshops, Quality, Product Safety, and MODSAP, while ensuring adherence to applicable rules and regulations.</p> <h3 >Core Maintenance Responsibilities</h3> <ul > <li >Perform First Stage/Mandatory and Independent certification of completed tasks by Maintenance Team Technicians, including Red-X clearance.</li> <li >Plan and coordinate scheduled aircraft maintenance activities (on and off aircraft) to meet the aircraft maintenance programme and RSAF operational requirements.</li> <li >Ensure work is carried out according to approved data, standards, and procedures detailed in the MOE.</li> <li >Prioritise tasks based on shop and aircraft schedules.</li> <li >Monitor and provide daily progress updates via agreed IT applications and verbal briefs.</li> <li >Highlight issues likely to impact the aircraft programme to the Team Leader/Maintenance Manager.</li> <li >Ensure timely and accurate information submission for AES and Technical Queries.</li> <li >Investigate and report on technical issues and accident/incident events.</li> <li >Maintain an effective housekeeping programme.</li> <li >Prepare for and cooperate with all internal/external audits.</li> <li >Ensure sound maintenance practices and documentation procedures are always followed.</li> </ul> <h3 >Team Leadership and Development</h3> <ul > <li >Limit overtime requirements through effective planning.</li> <li >Address poor performance and disciplinary matters.</li> <li >Ensure supervised personnel possess necessary knowledge and skills for tasks.</li> <li >Provide sufficient direct supervision to maintain quality standards.</li> <li >Plan shift patterns for effective manpower utilisation.</li> <li >Manage sickness and absence according to local policy.</li> <li >Provide on-the-job theory and practical training.</li> <li >Promote personal development for self and others.</li> <li >Assess team personnel competency and inform the Team Leader/Maintenance Manager of deficiencies.</li> <li >Certify personnel for specific tasks when certified as a ‘Workplace Trainer’.</li> <li >Establish and maintain positive relations with TSS’s internal and external customers.</li> <li >Ensure accurate information flow to and from the designated area of responsibility.</li> </ul> <h3 >Supply Chain and Equipment Management</h3> <ul > <li >Ensure strict tool control in accordance with procedures.</li> <li >Verify personnel authorisation/certification before delegating tasks.</li> <li >Ascertain that pre-use checks are carried out on equipment used in supervised tasks.</li> <li >Ensure accurate and timely demands for replacement components/parts.</li> <li >Accurately record required by and impact dates for demands.</li> <li >Monitor forecast dates for demands against the project plan and flag critical items.</li> <li >Highlight demands likely to impact the maintenance programme to the Team Leader/Maintenance Manager.</li> <li >Ascertain availability of serviceable and calibrated test equipment for planned tasks, informing the Operations Team Leader if unavailable.</li> </ul> <h3 >Required Qualifications and Experience</h3> <p >Candidates for this role must demonstrate a minimum of <strong >10 years of experience</strong> in aircraft maintenance or a closely related field. Essential requirements include:</p> <ul > <li >The ability to tow aircraft and supervise an aircraft towing team.</li> <li >Holding 2nd signature authority.</li> <li >A strong understanding of applicable rules, regulations, and maintenance procedures.</li> </ul>

<h3 >Company Overview</h3> <p >Alfalak Electronic Equipment &amp; Supplies Co. is a established organization operating in Saudi Arabia. The company is dedicated to maintaining efficient operations and supporting its teams through robust administrative functions and coordinated efforts.</p> <h3 >Role Summary: Administrator</h3> <p >Alfalak Electronic Equipment &amp; Supplies Co. is seeking an <strong >Administrator</strong> to provide comprehensive administrative and coordination support. This role is essential for ensuring the smooth and efficient operation of office activities, projects, and organizational initiatives. The Administrator will coordinate with internal teams and external stakeholders, manage administrative processes, support project activities, prepare reports and presentations, and maintain accurate documentation and records.</p> <h3 >Core Responsibilities</h3> <ul > <li >Provide professional administrative and coordination support for daily office operations, projects, and organizational activities.</li> <li >Coordinate administrative activities across multiple teams and stakeholders to ensure efficient execution of priorities and deliverables.</li> <li >Support project teams with planning, coordination, reporting, documentation, and performance tracking activities.</li> <li >Prepare and maintain reports, presentations, correspondence, meeting materials, trackers, and other administrative documents.</li> <li >Coordinate meetings, including scheduling, preparation of agendas and supporting materials, recording minutes, and monitoring follow-up actions.</li> <li >Monitor deadlines, action items, and deliverables, and proactively follow up with relevant stakeholders to ensure timely completion.</li> <li >Support communication activities by coordinating information, preparing updates, and facilitating effective communication between relevant teams.</li> <li >Maintain accurate records, databases, filing systems, and administrative documentation in accordance with organizational requirements.</li> <li >Utilize Microsoft Office applications and other relevant tools to support reporting, data analysis, documentation, and administrative efficiency.</li> <li >Review and organize data and performance information to provide accurate insights and support management decision-making.</li> <li >Build and maintain effective working relationships with internal and external stakeholders and ensure professional communication at all times.</li> <li >Identify opportunities to improve administrative processes, coordination practices, and overall operational efficiency.</li> <li >Maintain a high level of confidentiality, accuracy, professionalism, and attention to detail when handling administrative and organizational information.</li> <li >Perform other administrative and coordination duties as assigned by management.</li> </ul> <h3 >Required Experience and Qualifications</h3> <ul > <li >A minimum of <strong >2-5 years</strong> of relevant administrative experience.</li> <li >Demonstrated ability to manage multiple priorities and work effectively across different teams.</li> <li >Ability to analyze and apply data and insights to support.</li> </ul> <h3 >Work Details</h3> <p >This is a <strong >full-time</strong> position located in <strong >Dhahran, Eastern, Saudi Arabia</strong>. The role operates within a professional office environment, requiring collaboration with various internal and external stakeholders to achieve operational objectives.</p> <h3 >Application Information</h3> <p >Qualified candidates who meet the specified requirements are invited to submit their application for this Administrator role.</p>

<h3 >About the Role</h3> <p >BAE Systems Saudi Arabia is seeking a <strong >Tornado Simulator Instructor Pilot/WSO</strong> to join its team in Dhahran. This full-time position is central to providing critical training to Royal Saudi Air Force (RSAF) Tornado pilots, Weapons System Operators (WSOs), and instructors. The role supports BAE Systems' commitment as the UK Government’s nominated Prime Contractor, delivering essential equipment, support, and training to Saudi Arabia.</p> <h3 >Role Context and Contribution</h3> <p >The successful candidate will contribute directly to the maintenance of RSAF aircraft and the safe training of RSAF and Royal Saudi Naval Force personnel in the use of their aircraft, equipment, and weapons. This role aligns with BAE Systems Saudi Arabia's support for the Saudi Arabian National Agenda, including Saudisation and the development of Saudi National capability through industrialisation and partnerships.</p> <h3 >Key Responsibilities</h3> <ul > <li >Conduct ground school for all RSAF Tornado courses.</li> <li >Deliver Continuation Training lectures and practical training based on operational requirements for aircrew.</li> <li >Provide academic instruction covering flight planning, including normal and advanced equipment such as FDL and TAMPA.</li> <li >Instruct on aircraft systems, subsystems, displays, and instructional methodology/technique.</li> <li >Brief, conduct, and debrief all simulator missions.</li> <li >Perform mission planning for all phases of flight, ensuring successful execution with desired tactics and employment options/techniques.</li> <li >Operate associated simulators and cockpit trainers, including egress training.</li> <li >Train selected RSAF personnel to achieve qualification as simulator instructors.</li> <li >May be selected as a Standardisation Evaluation Flight Examiner to conduct simulator and other ground evaluations.</li> <li >May be required to act as a subject matter expert on other associated duties.</li> </ul> <h3 >Essential Qualifications and Experience</h3> <ul > <li >Demonstrated <strong >Tornado flight lead Pilot/Weapons System Operator</strong> experience.</li> <li >More than <strong >250 hours of previous instructor time</strong> in any fighter aircraft.</li> <li >More than <strong >1,000 hours total fighter time</strong> as a combat-ready Pilot/Weapon System Operator.</li> </ul> <h3 >Desirable Skills and Qualifications</h3> <ul > <li >Additional professional military aviation related qualifications, including but not limited to:</li> <ul > <li >Supervisory/authorisation experience.</li> <li >Flight/formation lead experience.</li> <li >Weapons instructor certification.</li> <li >Aviation safety qualifications.</li> <li >Human factors training.</li> </ul> </ul> <h3 >Work Environment</h3> <p >This is a full-time position based in Dhahran, Saudi Arabia, contributing to a vital national defense program.</p>

<h3 >About the Training Specialist and Curriculum Instructor Role</h3> <p >BAE Systems Saudi Arabia is seeking a <strong >Training Specialist and Curriculum Instructor</strong> to join its team in Dhahran. This <strong >full-time</strong> position requires <strong >2-5 years of experience</strong> and focuses on delivering comprehensive training programs for the Royal Saudi Air Force (RSAF).</p> <h3 >Role Purpose and Program Management</h3> <p >The primary purpose of this role is to instruct RSAF personnel in relevant subject areas, conduct thorough assessments, and manage training programs effectively. The specialist will be instrumental in ensuring academic progress, maintaining discipline, and continuously enhancing courseware and instructional methodologies to meet RSAF standards.</p> <h3 >Core Responsibilities</h3> <ul > <li >Teach approved syllabi for courses including Training Specialist, Advanced Training Course, Introduction to RSAF Training Organization, Management Principles, Leadership Concepts, ISD Course Writer, and RSAF Curriculum Specialist.</li> <li >Conduct regular academic assessments and phase-end examinations to ensure training objectives are met.</li> <li >Promote independent learning and a military ethos within the training environment.</li> <li >Evaluate student discipline, provide counseling, and motivation on academic and discipline issues.</li> <li >Record student academic assessment results, lesson attendance, and discipline issues.</li> <li >Provide regular reports on student academic progress, attendance, and discipline, and report other relevant issues.</li> <li >Regularly review and recommend changes to courseware and assessment material.</li> <li >Develop courses related to training and management programs.</li> <li >Apply RSAF procedures for configuration control of curriculum and courseware, including preparing documentation for change requests.</li> <li >Integrate new training materials or equipment into relevant courses.</li> <li >Ensure all training equipment is properly maintained and stored.</li> <li >Contribute to the preparation of timetables, scheduling, and allocation of instructors.</li> <li >Determine requirements, requisition, control, and account for tests and instructional materials.</li> <li >Ensure the availability of Specialty Training Standards and other training materials.</li> <li >Monitor trainee progress, provide counseling, and identify problem areas, recommending corrective actions.</li> <li >Assist in evaluating training effectiveness, presentation methods, and instructor ability.</li> <li >Utilize available resources and reporting procedures.</li> <li >Advise commanders and personnel in charge of all training programs.</li> <li >Develop and manage training programs to assist personnel in achieving proficiency in their assigned specialties.</li> <li >Plan and schedule work assignments, workloads, maintenance procedures, and development of knowledge and abilities for advancement.</li> <li >Prepare directives for the administration and control of training programs.</li> <li >Conduct periodic staff assistance visits to determine training program status and provide advice for improvement.</li> <li >Develop and implement organizational and functional charts to establish lines of authority and responsibilities.</li> <li >Coordinate with supply, operations, and other maintenance activities to improve procedures and resolve problems.</li> </ul> <h3 >Qualifications and Formal Training</h3> <ul > <li >Successful completion of a formal Instructional Techniques Course.</li> <li >Familiarity with RSAF instructional system development and completion of ISD Course Writer no. (20251).</li> <li >Completion of the mandatory Training Specialist Course no. (30050).</li> <li >Completion of the RSAF Curriculum Specialist Course no. (30194).</li> </ul> <h3 >Essential Skills and Knowledge</h3> <ul > <li >Thorough understanding of RSAFMs 105-8, 105-36, 105-31, 105-28, 105-29, 105-30B, 105-32, 105-01, and other Operational training manuals and directives.</li> <li >Confident and effective communication skills with all levels of staff.</li> <li >Knowledge of the functions and responsibilities of various classification boards.</li> <li >Knowledge of management functions.</li> <li >Knowledge of interviewing and counseling techniques, training techniques and methods of instruction, learning processes, and training evaluations.</li> <li >Familiarity with automated training systems, products, and training reporting procedures.</li> <li >Knowledge of Training Evaluation Programs (such as SAV, 90 and 180-day, and annual inspections/evaluations).</li> <li >Knowledge of training management, OJT policies, and procedures related to military personnel policies, procedures, and applicable training technology.</li> <li >Thorough knowledge of RSAF Instructions, Manuals, procedures, and directives.</li> <li >An understanding of the SHE (Safety, Health, and Environment) process.</li> <li >Computer literate, with a fully conversant working knowledge of Microsoft Office, especially Word and PowerPoint.</li> <li >Ability to maintain the status of unit OJT programs.</li> <li >Experience in developing and updating tests.</li> <li >Capability to advise and assist supervisors in developing and using master and individual Job Performance Guides (JPGs).</li> <li >Proficiency in designing and supervising all curriculum activities.</li> <li >Skill in preparing and maintaining control and security on all curriculum records, documents, files, and related materials.</li> <li >Aptitude for determining prerequisite equipment and aids that will enhance instructional objectives.</li> <li >Ability to determine appropriate instructional methods that serve for learning objectives.</li> </ul> <h3 >Work Environment and Application</h3> <p >This full-time role is based in Dhahran and involves working within a dynamic environment focused on enhancing the capabilities of the Royal Saudi Air Force. Qualified candidates are encouraged to apply.</p>

<h3 >About the Opportunity</h3> <p >BAE Systems Saudi Arabia is seeking a <strong >Training Specialist and Curriculum Instructor</strong> to join our team in Dhahran. This full-time role is central to delivering high-quality instruction, developing comprehensive training programs, and ensuring the continuous improvement of curriculum and training methodologies within the Royal Saudi Air Force (RSAF) framework. Candidates should possess <strong >2-5 years of relevant experience</strong>.</p> <h3 >Instructional and Student Support Responsibilities</h3> <ul > <li >Deliver instruction in relevant subject areas according to approved syllabi, including specialized RSAF courses such as Training Specialist (30050), Advanced Training Course (30063), and ISD Course Writer (20251).</li> <li >Conduct academic assessments and phase-end examinations to monitor student progress and ensure achievement of training objectives.</li> <li >Promote independent learning and a military ethos consistent with the training environment.</li> <li >Provide ongoing evaluation of student discipline and offer counseling and motivation on academic and disciplinary matters.</li> <li >Maintain accurate records of student academic results, lesson attendance, and discipline issues, providing regular reports as required.</li> <li >Monitor trainee progress, identify problem areas, determine causes, and recommend corrective actions.</li> </ul> <h3 >Curriculum and Program Management</h3> <ul > <li >Regularly review and recommend changes to subject area courseware and assessment materials.</li> <li >Develop new courses related to training and management programs.</li> <li >Apply RSAF procedures for configuration control of curriculum and courseware, including preparing documentation for change requests.</li> <li >Integrate new training materials or equipment into relevant courses and ensure all training equipment is properly maintained and stored.</li> <li >Contribute to the preparation of timetables, scheduling, and allocation of instructors.</li> <li >Determine requirements, requisition, control, and account for tests and instructional materials, ensuring the availability of Specialty Training Standards.</li> <li >Assist in evaluations of training for effectiveness, presentation methods, and instructor ability.</li> <li >Advise commanders and personnel on all training programs and develop/manage programs to assist personnel in achieving proficiency.</li> <li >Prepare directives for the administration and control of training programs and conduct periodic staff assistance visits.</li> </ul> <h3 >Required Qualifications and Experience</h3> <ul > <li >Graduate of a Service or Civilian Technical Training Institute.</li> <li >Successful completion of a formal Instructional Techniques Course.</li> <li >Demonstrated experience as a skill level 9 Training Specialist, with proven capability in managing and supervising training programs.</li> <li >Familiarity with RSAF instructional system development, including successful completion of ISD Course Writer no. (20251).</li> <li >Completion of the mandatory Training Specialist Course no. (30050).</li> <li >Completion of the RSAF Curriculum Specialist Course no. (30194).</li> </ul> <h3 >Essential Knowledge and Abilities</h3> <ul > <li >Ability to evaluate all types and elements of training programs, including academic and On-the-Job Training (OJT).</li> <li >Thorough understanding of RSAF Manuals (RSAFMs 105-8, 105-36, 105-31, 105-28, 105-29, 105-30B, 105-32, 105-01) and other operational training manuals and directives.</li> <li >Proficient knowledge of management functions, interviewing and counseling techniques, and various training techniques and methods of instruction.</li> <li >Familiarity with the learning process, training evaluations, automated training systems, products, and training reporting procedures.</li> <li >Knowledgeable of Training Evaluation Programs, such as Staff Assistance Visits (SAV), 90 and 180-day reviews, and annual inspections/evaluations.</li> <li >Comprehensive knowledge of training management, OJT policies and procedures, military personnel policies, and applicable training technology.</li> <li >Strong communication skills, with the ability to interact effectively with staff at all levels.</li> <li >Capability to maintain the status of unit OJT programs, develop and update tests, and advise supervisors on Job Performance Guides (JPGs).</li> <li >Competence in designing and supervising all curriculum activities, including preparing and maintaining control and security of curriculum records.</li> <li >A clear understanding of the Safety, Health, and Environment (SHE) process.</li> </ul> <h3 >Work Environment</h3> <p >This full-time position is based in Dhahran, operating within the structured environment of the Royal Saudi Air Force (RSAF) training framework. The role requires adherence to a military ethos and active participation in a dynamic instructional setting.</p> <h3 >Application Process</h3> <p >We invite qualified candidates who meet the specified requirements to apply for this role.</p>

<h3 >Lecturer in Mechanical Engineering</h3> <p >King Fahd University of Petroleum &amp; Minerals (KFUPM) is seeking qualified Saudi candidates for a <strong >full-time Lecturer position in Mechanical Engineering</strong>. This role is based in Dhahran within the Department of Mechanical Engineering and is open to individuals holding a Master's degree.</p> <h3 >About the Role</h3> <p >The successful candidate will contribute to the department's academic mission through both research and teaching activities. This position offers an opportunity to engage with students and faculty in a dynamic university environment, supporting the advancement of mechanical engineering knowledge and education.</p> <h3 >Key Responsibilities</h3> <p >The Lecturer will be expected to commit approximately 35-40 hours per week to professional duties. Core responsibilities include:</p> <ul > <li >Delivering instruction and teaching courses within the Mechanical Engineering curriculum.</li> <li >Conducting research and contributing to scholarly output.</li> <li >Providing academic advising and mentorship to students.</li> <li >Performing administrative duties as assigned by the department.</li> <li >Undertaking any other academic duties deemed necessary by the academic department.</li> </ul> <h3 >Qualifications and Requirements</h3> <p >Applicants must meet the following essential criteria:</p> <ul > <li >An earned Master’s degree from a reputable university in a relevant field of Mechanical Engineering.</li> <li >Completion of a full-time Master’s degree program with very good academic grades.</li> <li >Possession of a certificate equivalency if the degree was obtained from outside the Kingdom of Saudi Arabia.</li> </ul> <h3 >Areas of Specialization</h3> <p >The Department of Mechanical Engineering is particularly interested in candidates with expertise in the following specializations:</p> <ul > <li >Fluid Dynamics and Heat</li> <li >Machine Design</li> <li >Materials and Manufacturing Processes</li> <li >Engineering Thermodynamics</li> <li >Control</li> <li >Solar Energy</li> <li >Water Desalination</li> <li >Nanotechnology</li> </ul> <h3 >Additional Information</h3> <p >The medium of instruction at King Fahd University of Petroleum &amp; Minerals (KFUPM) is English. This job advertisement is exclusively for Saudi nationals.</p>

<h3 >About the Role</h3> <p >Alfalak Electronic Equipment &amp; Supplies Co. is seeking an <strong >Associate Cybersecurity Analyst</strong> to join its team in Dhahran, Eastern, Saudi Arabia. This is a full-time position requiring 2-5 years of relevant experience. The role is central to supporting cybersecurity operations and enhancing the organization's security posture.</p> <h3 >Role Purpose</h3> <p >The Associate Cybersecurity Analyst is responsible for supporting critical cybersecurity operations by actively monitoring security events, performing log analysis, and investigating alerts. This position is integral to maintaining security monitoring platforms and works collaboratively with cybersecurity teams to identify threats, improve system visibility, and enhance incident detection and response capabilities.</p> <h3 >Key Responsibilities</h3> <ul > <li >Monitor security events and analyze logs to detect potential threats.</li> <li >Investigate security alerts and incidents, escalating as necessary.</li> <li >Maintain and optimize security monitoring platforms.</li> <li >Collaborate with cybersecurity teams to identify new threats and vulnerabilities.</li> <li >Contribute to improving overall security visibility and incident response processes.</li> </ul> <h3 >Educational Background and Experience</h3> <ul > <li >Bachelor's degree in Cybersecurity, Computer Science, Software Engineering, or a related field.</li> <li >2-5 years of professional experience in a relevant cybersecurity role.</li> </ul> <h3 >Technical Skills and Knowledge</h3> <ul > <li >Strong understanding of cybersecurity functions and security operations.</li> <li >Hands-on experience with SIEM and log analysis, with a preference for Splunk.</li> <li >Knowledge of log management systems and data engineering tools (*, Cribl).</li> <li >Good understanding of database concepts and query languages.</li> <li >Strong knowledge of networking protocols and Windows/Linux system administration.</li> <li >Basic scripting skills using Python and/or PowerShell.</li> <li >Basic knowledge of cloud platforms such as AWS, Azure, or GCP.</li> </ul> <h3 >Required Certifications and Attributes</h3> <ul > <li >Splunk Power User and Administration certifications are mandatory.</li> <li >Strong analytical, troubleshooting, and problem-solving skills.</li> </ul>

<h3 >About the Opportunity</h3> <p >King Fahd University of Petroleum &amp; Minerals (KFUPM) is seeking a dedicated individual to join its Department of Mechanical Engineering as a <strong >Graduate Assistant</strong>. This full-time position is based in Dhahran and is primarily designed for potential Saudi candidates who are at the beginning of their academic careers, offering a foundational role in both research and teaching within a prestigious academic environment.</p> <h3 >Role Overview</h3> <p >The Graduate Assistant will contribute significantly to the academic and research objectives of the Mechanical Engineering Department. This role involves a commitment of approximately <strong >35-40 hours per week</strong>, focusing on supporting faculty members and students through various academic and administrative tasks. It provides an excellent opportunity for professional development in a university setting.</p> <h3 >Key Responsibilities</h3> <ul > <li >Carrying out assigned teaching duties, which may include assisting with lectures, labs, and tutorials.</li> <li >Conducting research under the guidance of faculty, contributing to departmental projects and publications.</li> <li >Providing academic advising to students, offering guidance on coursework and academic progression.</li> <li >Performing various administrative duties to support the smooth operation of the department.</li> <li >Undertaking any other academic duties as assigned by the concerned academic department.</li> </ul> <h3 >Qualifications and Requirements</h3> <p >Applicants must meet the following essential qualifications to be considered for this Graduate Assistant position:</p> <ul > <li >An earned bachelor’s degree from a reputable university in <strong >Mechanical Engineering</strong> or a closely related field.</li> <li >Completion of a full-time bachelor’s degree program with <strong >very good grades</strong>.</li> <li >Certificate equivalency is required for degrees obtained from universities outside the Kingdom of Saudi Arabia.</li> </ul> <h3 >Work Environment and Location</h3> <p >This is a full-time academic support role situated within the Department of Mechanical Engineering at King Fahd University of Petroleum &amp; Minerals in Dhahran. The successful candidate will work within a dynamic university environment, contributing to both the educational and research missions of the institution.</p> <h3 >Application Information</h3> <p >Interested candidates who meet the specified requirements are encouraged to apply for this Graduate Assistant position. Further details regarding the application process can be obtained through the university's official channels.</p>

<div dir="rtl"><h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">نبذة عن الدور</h3> <p style="margin:0 0 12px; ************;">تبحث مؤسسة تعليم الخيرية للمقاولات العامة عن <strong style="font-weight:700;">فني تدفئة وتهوية وتكييف</strong> للانضمام إلى فريقها في الظهران، المنطقة الشرقية. يتولى شاغل هذا الدور مسؤولية تركيب وصيانة وتصليح معدات التكييف والتدفئة والتهوية المتنوعة، بما في ذلك وحدات ومضخات التدفئة ومكيفات الهواء، وذلك لضمان كفاءة الأنظمة وسلامة تشغيلها.</p> <h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">المهام والمسؤوليات الرئيسية</h3> <ul style="margin:0 0 12px; padding-inline-start:24px; list-style-type:disc; list-style-position:outside;"> <li style="margin:0 0 6px;">المساهمة في مجمل عملية تصميم نظم التهوية وتكييف الهواء والتدفئة، وتقديم المشورة بشأن المواد ومعايير الجودة.</li> <li style="margin:0 0 6px;">تقديم الدعم للمشروعات الهندسية، ومباشرة تنفيذ العمليات وتركيب النظم.</li> <li style="margin:0 0 6px;">وضع الجداول الزمنية وتقديرات التكلفة للمشروعات المتعلقة بأنظمة التدفئة والتهوية والتكييف.</li> <li style="margin:0 0 6px;">تقديم الدعم في أعمال الصيانة الدورية وتصليح الأعطال في النظم والمعدات.</li> </ul> <h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">المراقبة والامتثال</h3> <ul style="margin:0 0 12px; padding-inline-start:24px; list-style-type:disc; list-style-position:outside;"> <li style="margin:0 0 6px;">مراقبة الجوانب الفنية المتصلة بإنتاج وتركيب واستعمال وصيانة منظومات وأجهزة ومعدات التدفئة والتهوية والتكييف.</li> <li style="margin:0 0 6px;">التأكد من دقة أداء الأنظمة ومطابقتها للمواصفات الفنية ومعايير الجودة.</li> <li style="margin:0 0 6px;">اتباع جميع سياسات وإجراءات الصحة والسلامة والبيئة المعمول بها لضمان بيئة عمل آمنة.</li> </ul> <h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">المؤهلات والخبرة</h3> <ul style="margin:0 0 12px; padding-inline-start:24px; list-style-type:disc; list-style-position:outside;"> <li style="margin:0 0 6px;">خبرة عملية تتراوح بين <strong style="font-weight:700;">2 إلى 5 سنوات</strong> في مجال تركيب وصيانة أنظمة التدفئة والتهوية وتكييف الهواء.</li> <li style="margin:0 0 6px;">معرفة قوية بمبادئ عمل معدات التكييف والتدفئة والتهوية وأنظمة التحكم بها.</li> <li style="margin:0 0 6px;">القدرة على قراءة المخططات الفنية وتحديد الأعطال وإصلاحها بكفاءة.</li> <li style="margin:0 0 6px;">الالتزام بمعايير الجودة والسلامة المهنية.</li> </ul> <h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">تفاصيل الوظيفة</h3> <p style="margin:0 0 12px; ************;">هذه الوظيفة بدوام كامل ومقرها في <strong style="font-weight:700;">الظهران، المنطقة الشرقية</strong>. تلتزم مؤسسة تعليم الخيرية للمقاولات العامة بتوفير بيئة عمل داعمة ومحفزة. لم يتم الكشف عن تفاصيل الراتب في الوقت الحالي.</p> <h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">للتقديم</h3> <p style="margin:0 0 12px; ************;">ندعو المهتمين ممن تنطبق عليهم المتطلبات للتقديم على هذا الدور.</p></div>

<h3 >About the Role</h3> <p >Alfalak Electronic Equipment &amp; Supplies Co. is seeking a <strong >Fleet Marketing &amp; Media Specialist</strong> to join our team in Dhahran, Eastern region. This is a full-time position focused on developing and managing marketing and media content for our fleet operations. The role requires a creative individual with a strong foundation in media and visual communication.</p> <h3 >Role Summary</h3> <p >The Fleet Marketing &amp; Media Specialist will be responsible for creating engaging marketing and media materials that maintain brand consistency across all communication channels. This position involves translating strategic ideas into professional and visually compelling content, ensuring alignment with the organization’s brand identity and messaging. Effective management of multiple creative requests and adherence to deadlines are key aspects of this role.</p> <h3 >Key Responsibilities</h3> <ul > <li >Develop creative and engaging visual content for both digital and print media platforms.</li> <li >Create marketing and communication materials that align with the organization's branding and messaging guidelines.</li> <li >Maintain consistency in visual identity, branding, and communication across all produced materials.</li> <li >Manage multiple creative requests efficiently and prioritize tasks to meet established deadlines.</li> <li >Support the development of marketing campaigns, presentations, promotional materials, and other media content.</li> <li >Collaborate with internal teams to understand specific creative requirements and deliver appropriate visual solutions.</li> <li >Ensure all content is clear, professional, engaging, and aligned with the organization's strategic objectives.</li> <li >Contribute creative ideas and concepts to enhance the organization's overall marketing and media presence.</li> <li >Review and refine creative materials to ensure high-quality output and consistent brand representation.</li> </ul> <h3 >Candidate Profile</h3> <p >The ideal candidate will possess 0-1 years of experience, demonstrating a strong background in media. Essential skills include excellent design capabilities, proficiency in content creation, and strong visual communication skills. We are looking for a detail-oriented and creative individual who can effectively manage diverse media projects.</p> <h3 >Employment Details</h3> <p >This is a full-time position based in Dhahran, Eastern region. The salary for this role will be discussed during the interview process.</p> <h3 >Application Process</h3> <p >Interested candidates are encouraged to apply. We look forward to reviewing your qualifications for this role.</p>

<h3 >About Johns Hopkins Aramco Healthcare (JHAH)</h3> <p >Johns Hopkins Aramco Healthcare (JHAH) is seeking a dedicated <strong >Dental Assistant</strong> to join its team in Dhahran. This full-time position offers an opportunity to contribute to patient care within a leading healthcare organization.</p> <h3 >Role Summary</h3> <p >The Dental Assistant performs essential tasks that support dentists and dental therapists during clinical procedures. The primary objective of this role is to ensure the provision of efficient and effective patient care through direct assistance and operational support within the dental clinic.</p> <h3 >Key Responsibilities</h3> <ul > <li >Provide direct assistance to dentists and dental hygienists across diagnostic, operative, and preventive procedures, covering all phases of clinical treatments.</li> <li >Maintain sterile equipment and ensure the cleanliness of the operatory area.</li> <li >Perform various X-ray procedures within the operatory setting.</li> <li >Execute more complex tasks, including the preparation and mixing of materials for patient treatment. This involves preparing anesthetic syringes with appropriate needles and carpules, rubber dam equipment, impression materials (alginate, hydrocolloid, rubber base), periodontal dressings, cements (zinc oxide, zinc phosphate, calcium hydroxide), and restorative materials (amalgam, composite resins).</li> </ul> <h3 >Professional Development and Supervision</h3> <p >The Dental Assistant will develop new skills through continuous in-service training and chairside experience. This development occurs under the direct supervision of a Dentist, On-Job Trainer, and Senior Dental Assistant. The role operates directly under the supervision of the Dentist or with guidance from the Senior Dental Assistant.</p> <h3 >Qualifications and Experience</h3> <ul > <li >A minimum of <strong >2 to 5 years</strong> of experience in a relevant dental assistant role.</li> <li >Possession of SCFHS Certification, as applicable.</li> </ul> <h3 >Work Location and Type</h3> <p >This is a full-time position based in <strong >Dhahran</strong>. Johns Hopkins Aramco Healthcare is committed to providing high-quality medical services and fostering professional growth.</p>

<h3 >About Johns Hopkins Aramco Healthcare (JHAH)</h3> <p >Johns Hopkins Aramco Healthcare (JHAH) is seeking a highly skilled and experienced <strong >Senior US Imaging Technology Specialist</strong> with expertise in Vascular Ultrasound to join its team in Dhahran. This full-time role is integral to providing advanced diagnostic imaging services within a patient-centered care framework.</p> <h3 >Role Overview</h3> <p >The Senior US Imaging Technology Specialist is responsible for delivering individualized, person-centered care while performing a range of advanced ultrasound examinations. This includes specialized musculoskeletal US imaging procedures and comprehensive vascular ultrasound studies. A key aspect of this role involves meticulously reviewing imaging orders and adapting protocols based on the patient's clinical history to ensure optimal diagnostic outcomes and accurate results.</p> <h3 >Key Responsibilities</h3> <ul > <li >Provide support in performing all advanced and newly introduced ultrasound imaging procedures.</li> <li >Assume acting or backup leadership roles as required to ensure continuity of operations.</li> <li >Develop and participate in the regular review of practicing policies to maintain high standards.</li> <li >Participate actively in planning and arranging schedules, as well as reviewing workflows for efficiency.</li> <li >Engage in imaging equipment troubleshooting and other operational activities assigned by management.</li> <li >Contribute to the development and ongoing monitoring of ultrasound Key Performance Indicators (KPIs).</li> <li >Participate in planning and implementing strategic initiatives related to imaging technology and services.</li> </ul> <h3 >Qualifications and Experience</h3> <p >Candidates for this position must possess a strong background in ultrasound imaging, with a particular focus on vascular ultrasound. A minimum of <strong >10 years of relevant experience</strong> in advanced ultrasound procedures, including musculoskeletal US imaging, is required. The specialist should demonstrate proficiency in adjusting protocols based on clinical history to achieve precise diagnostic outcomes.</p> <h3 >Work Environment</h3> <p >This is a full-time position based in Dhahran, where the successful candidate will work within a dedicated healthcare team at Johns Hopkins Aramco Healthcare. The role involves contributing to a dynamic environment focused on patient care and operational excellence in medical imaging.</p> <h3 >Application Process</h3> <p >Interested applicants who meet the specified qualifications and experience are encouraged to apply. This role offers an opportunity to contribute to a leading healthcare institution.</p>

<h3 >About BAE Systems Saudi Arabia and the Role</h3> <p >BAE Systems Saudi Arabia, the UK Government’s nominated Prime Contractor for providing equipment, support, and training to Saudi Arabia, is seeking a <strong >Full-time Engine Maintenance Technician</strong>. This role is based in <strong >Dhahran</strong> and offers a <strong >competitive salary</strong>. The company supports the Saudi Arabian National Agenda, including Saudisation and the development of Saudi National capability.</p> <h3 >Role Purpose</h3> <p >The Engine Maintenance Technician is responsible for supporting the rectification and recovery of the Royal Saudi Air Force (RSAF) Tornado fleet to serviceable status. This position plays a critical role in maintaining an active flying program through effective and efficient maintenance and production of RB199 engines.</p> <h3 >Key Responsibilities</h3> <ul > <li >Maintain good engineering practices and ensure compliance with RSAF Technical Orders in all aspects of jet engine work and aircraft maintenance.</li> <li >Perform comprehensive component maintenance, including inspection, surveys, evaluation, installation, repairs, troubleshooting, servicing, overhaul, modification, and on-aircraft system testing.</li> <li >Ensure all work is carried out in strict accordance with the standards and procedures detailed within the Maintenance Organisation Exposition (MOE).</li> <li >Implement strict tool control procedures.</li> <li >Manage spare parts requirements using the GOLDesp logistics system.</li> <li >Provide functional guidance to Saudi National Technical Training Program (SNTTP) initiatives regarding engineering issues.</li> <li >Execute Time Compliance Technical Orders (TCTOs) and Special Inspections as directed.</li> <li >Conduct visual inspections of engines.</li> <li >Action work orders for unscheduled issues identified during maintenance using the GOLDesp system.</li> <li >Manage and maintain accurate daily work recording diaries.</li> <li >Provide up-to-date briefings and information on daily progress and any issues affecting ongoing maintenance activities to relevant parties.</li> <li >Support and provide input to on-site Rolls Royce personnel for raising Technical Queries (TQs), Defect Data Reports (DDRs), and maintenance activities.</li> <li >Ensure personal authorizations for all conducted maintenance activities remain current.</li> <li >Utilise knowledge and experience in aircraft maintenance, quality assurance, logistical support, and company procedures.</li> <li >Provide Line Technical Support to the RSAF on engineering matters.</li> </ul> <h3 >Qualifications and Experience</h3> <p >Candidates should possess <strong >5-10 years of relevant experience</strong> and meet the following criteria:</p> <ul > <li ><strong >Essential:</strong> A recognised qualification to NVQ/ONC/OND/BTEC level in a relevant technical discipline, a technical apprenticeship, or an equivalent technical qualification acceptable to M&amp;CA.</li> <li ><strong >Essential:</strong> Substantial post-qualification practical maintenance experience within an operational flying aircraft environment, supported by formal recorded workplace applied related training.</li> <li ><strong >Essential:</strong> A quality-minded, mature individual with a positive and proactive approach to aircraft maintenance and support issues.</li> <li ><strong >Essential:</strong> Demonstrated sound oral and written two-way communication skills, with the ability to be tactful, discreet, and confident at all levels.</li> <li ><strong >Essential:</strong> Ability to work effectively in a mixed workforce (Expatriate/Saudi National).</li> <li ><strong >Essential:</strong> Ability to work on own initiative to resolve complex technical issues.</li> <li ><strong >Essential:</strong> Relevant type training (Q Course) and specific training if required.</li> <li ><strong >Essential:</strong> Understanding and application of human factors, error management, health and safety, and proactive hazard analysis, appropriate to the role.</li> <li ><strong >Essential:</strong> Successful candidates (Saudi or Expatriate) must obtain and maintain Saudi Council of Engineers (SCE) membership at the appropriate level prior to commencing employment in KSA.</li> <li ><strong >Desirable:</strong> Knowledge of company processes and procedures.</li> <li ><strong >Desirable:</strong> Knowledge of EASA Part 145.</li> <li ><strong >Desirable:</strong> Broad aerospace and defence company/industry knowledge.</li> <li ><strong >Desirable:</strong> Understanding of the RSAF 4-1-7166 series and supporting technical publications applicable to the work area.</li> <li ><strong >Desirable:</strong> First line engine and/or SPS maintenance experience.</li> </ul> <h3 >Benefits</h3> <p >BAE Systems Saudi Arabia offers a comprehensive benefits package, including:</p> <ul > <li >Competitive salary.</li> <li >Rent-free accommodation (for expatriates).</li> <li >Access to free/subsidized recreation facilities.</li> <li >Generous leave and travel allowance.</li> <li >Opportunity to apply for family to join (for expatriates, after commencement of employment).</li> <li >Full health care scheme.</li> </ul> <h3 >Work Environment</h3> <p >This <strong >full-time</strong> position is based in <strong >Dhahran</strong>, Saudi Arabia, within an operational flying aircraft environment. The role requires collaboration within a diverse workforce, contributing to critical defence support operations.</p>

<h3 >About Johns Hopkins Aramco Healthcare (JHAH)</h3> <p >Johns Hopkins Aramco Healthcare (JHAH) is seeking a <strong >Diagnostic Imaging Technologist</strong> to join their team in Dhahran. This full-time position is integral to providing high-quality diagnostic imaging services within a leading healthcare environment.</p> <h3 >Role Summary</h3> <p >The Diagnostic Imaging Technologist performs a variety of radiographic procedures, encompassing routine, trauma, and bedside examinations. This role operates in strict accordance with established practices and procedures, ensuring full compliance with safety, environmental, and infection control standards to maintain a secure and effective clinical setting.</p> <h3 >Key Responsibilities</h3> <ul > <li >Perform advanced and orthopedic-specific X-ray examinations, including all Fluoroscopy procedures, with minimal supervision.</li> <li >Apply current radiation protection standards in radiology to effectively adjust parameters, obtain superior image quality, and improve patient throughput.</li> <li >Oversee the training and development of interns and junior technologists on routine examinations and procedures, ensuring adherence to best practices.</li> <li >Participate actively in all area activities essential for maintaining efficient operation, including equipment calibration, quality control, and supplies management.</li> <li >Execute any other operational activity assigned by the manager to support departmental goals and ensure smooth workflow.</li> </ul> <h3 >Required Qualifications and Certifications</h3> <ul > <li >Candidates must possess valid <strong >SCFHS Certification</strong>.</li> </ul> <h3 >Experience</h3> <p >A minimum of <strong >2 to 5 years of experience</strong> as a Diagnostic Imaging Technologist is required for this position.</p> <h3 >Work Location and Type</h3> <p >This is a <strong >full-time</strong> role based in Dhahran, Saudi Arabia, offering an opportunity to contribute to a dedicated healthcare team.</p>

<ul><li>Install, maintain, and repair electrical wiring, equipment, and fixtures according to the National Electrical Code and local regulations.</li><li>Diagnose electrical problems using specialized tools and equipment, ensuring timely and efficient troubleshooting.</li><li>Collaborate with contractors, engineers, and other tradespeople to design and implement electrical systems in residential, commercial, and industrial settings.</li><li>Conduct regular inspections of electrical systems to identify potential hazards or code violations and make necessary adjustments.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Experience with&nbsp;<strong>230V/460V industrial motors and electrical systems</strong>.</p></li><li><p>Experience with&nbsp;<strong>high-voltage industrial motors and electrical systems</strong>.</p></li><li><p>Strong troubleshooting skills for&nbsp;<strong>3-phase electrical systems and control circuits</strong>.</p></li><li><p>Knowledge of&nbsp;<strong>MCCs, VFDs, soft starters, and control panels</strong>.</p></li><li><p>Experience with&nbsp;<strong>LOTO, Ex-proof equipment, Megger testing, and cable termination</strong></p></li></ul>

<h3 >About the Opportunity</h3> <p >BAE Systems Saudi Arabia is seeking a dedicated <strong >Wheel/Tyre Technician</strong> to join their team in Dhahran. This full-time position is open exclusively to Saudi Nationals and requires a high level of commitment to maintaining aircraft wheel systems.</p> <h3 >Role Purpose</h3> <p >The Wheel/Tyre Technician plays a critical role in supporting the flying programme and scheduled maintenance activities. This involves ensuring the continuous availability of serviceable aircraft wheels through meticulous disassembly, cleaning, reassembly, and testing of components, alongside diligent documentation and strict adherence to safety protocols.</p> <h3 >Key Responsibilities</h3> <ul > <li >Perform disassembly of aircraft wheels and conduct thorough cleaning of all components.</li> <li >Execute reassembly of aircraft wheels, including hub assembly, wheel inflation, and pressure testing.</li> <li >Prepare and accurately complete all required maintenance documentation and reports.</li> <li >Maintain equipment specific to the job role and ensure its operational readiness.</li> <li >Maintain a sufficient quantity of serviceable aircraft wheels for immediate deployment to support the flying programme and scheduled maintenance.</li> <li >Report and encourage expedient Error Management Reporting, addressing or highlighting any safety concerns and failings immediately.</li> <li >Assist within the area-of-responsibility with regards to audits and take responsibility for addressing or ratifying any audit findings when required.</li> <li >Manage personal time and attendance, mandatory training, competencies, authorisations, Saudi Council of Engineering membership, and leave usage in accordance with company policy.</li> <li >Identify and execute opportunities to improve and enhance the delivery of the TSS service, fostering a culture of continuous improvement.</li> </ul> <h3 >Qualifications and Essential Requirements</h3> <ul > <li >A recognised qualification to NVQ3/ONC/OND/BTEC level in a relevant technical discipline, a technical apprenticeship, or a suitable equivalent technical qualification acceptable to M&amp;CA. Alternatively, a Part 66 license (current or lapsed) or a suitable equivalent technical license acceptable to M&amp;CA.</li> <li >Relevant type training (Q Course) and specific training if required.</li> <li >Registration with the Saudi Council of Engineering (SCE).</li> <li >At least <strong >5 years</strong> of post-qualification practical maintenance experience within an operational flying aircraft environment, supported by formal recorded workplace applied related training. Alternatively, <strong >3 years</strong> on the same aircraft type, or successful completion of a BAESSA apprenticeship programme (SNTTP/TSNTTP).</li> <li >Demonstrated knowledge and understanding of aircraft maintenance and engineering principles.</li> <li >Understanding and application of human factors, error management, health and safety regulations, and proactive hazard analysis appropriate to the role.</li> <li >Basic IT literacy skills and some knowledge of asset tracking or MRP systems.</li> </ul> <h3 >Desirable Skills and Experience</h3> <ul > <li >Broad knowledge of the Aerospace and Defence company or industry.</li> <li >Ability to understand and use the Maintenance GoldESP system or similar platforms.</li> <li >Full conversance with the interpretation of technical diagrams and documentation.</li> <li >Experience as a stores person, including the ability to drive a forklift truck, and full conversance with logistics, warehouse management systems, locations, and safe handling methods.</li> <li >Experience in using special-to-type containers and awareness of potential hazards caused by incorrect storage, such as moisture ingress and cadmium corrosion.</li> </ul> <h3 >Compensation and Benefits</h3> <p >This full-time role offers a competitive salary and benefits package.</p>