وظائف مهندس ميكانيكا معدات ثقيلة - الاحساء السعودية

<ol><li><p>Developing, implementing, and updating project-specific Health, Safety, and Environment (HSE) plans in accordance with Saudi Aramco Safety Standards and company policies.</p></li><li><p>Conducting daily site safety inspections, audits, and walkthroughs across construction and cross-country pipeline activities to identify hazards and enforce compliance.</p></li><li><p>Leading daily pre-task briefings, Toolbox Talks (TBT), and safety orientation sessions for site personnel and subcontractors.</p></li><li><p>Monitoring critical site operations, including lifting activities, hot work, confined space entry, working at heights, excavation, and heavy equipment operations.</p></li><li><p>Issuing, reviewing, and verifying Work Permits (PTW) as required by project protocols and Aramco Safety System requirements.</p></li><li><p>Identifying potential site hazards and safety risks in advance, recommending immediate corrective and preventive actions (CAPA), and ensuring close-out.</p></li><li><p>Recording, investigating, and reporting all near-misses, incidents, and accidents; conducting root-cause analysis in coordination with the HSE Manager and Project Manager.</p></li><li><p>Preparing weekly and monthly HSE metrics, incident reports, safety statistics, and audit summaries for submission to project management and Aramco representatives.</p></li><li><p>Coordinating closely with Project Managers, Construction Supervisors, and client representatives to ensure seamless execution without compromising safety standards.</p></li><li><p>Enforcing the strict use of Personal Protective Equipment (PPE) and ensuring all tools, machinery, and equipment on site meet required safety certifications.</p></li><li><p>Maintaining emergency response readiness on site, including fire safety protocols, first-aid stations, evacuation plans, and periodic drills.</p></li><li><p>Assisting the Project Management team during external HSE audits, client inspections, and compliance evaluations.</p></li></ol><p><strong>Desired Candidate Profile</strong></p><ol><li><p><strong>Education:</strong> Degree or Diploma in Engineering, Occupational Health & Safety, or a related technical discipline.</p></li><li><p><strong>Certifications:</strong></p><ul><li><p>Valid Saudi Aramco Approval as Safety Supervisor (SAP ID / Approval Card).</p></li><li><p>Professional HSE certifications (NEBOSH IGC, OSHA, or IOSH).</p></li></ul></li><li><p><strong>Experience:</strong> Minimum 5 to 7 years of experience as a Safety Supervisor in Oil & Gas, Petrochemical, or Cross-Country Pipeline construction projects in Saudi Arabia.</p></li><li><p><strong>Driving License:</strong> Valid Saudi Arabian Driving License is <strong>mandatory</strong>. Fully conversant with Saudi Aramco Construction Safety Manual (CSM), Engineering Standards, and Work Permit System (WPR).</p></li><li><p>Strong leadership qualities and executive skills to firmly enforce site safety regulations and stop unsafe work procedures immediately.</p></li><li><p>Excellent organizational capabilities to manage site documentation, inspection logs, and incident reporting systematically.</p></li><li><p>Strong written and verbal communication skills in English (Arabic is a plus).</p></li><li><p>High familiarity with hazardous activities typical to pipeline and industrial construction (trenching, radiography, pressure testing, heavy lifts).</p></li><li><p>Teamwork and collaborating abilities to build a strong safety culture among multi-national workforces.</p></li><li><p>Proficient in Microsoft Office (Word, Excel, PowerPoint) for HSE documentation and reporting.</p></li><li><p>Well-versed across all work disciplines: Civil, Mechanical, Piping, Electrical, and Instrumentation</p></li></ol>

We're Hiring | Business Development Manager – B2B Sales<br>We are looking for an experienced Business Development Manager – B2B Sales to join our growing team at a leading premium lubricant company. This role is ideal for a highly motivated professional who excels at developing new business, managing key accounts, and delivering value-based sales solutions across industrial and commercial sectors. Key Responsibilities Identify, develop, and convert new B2B business opportunities across multiple industries. Build and maintain a strong sales pipeline through prospecting, networking, and strategic account development. Conduct customer visits, site assessments, fleet analysis, and consultative needs assessments. Develop compelling commercial proposals highlighting product performance, operational efficiency, reliability, and total cost of ownership. Lead value-based negotiations with customers, procurement teams, technical stakeholders, and senior decision-makers. Manage the complete sales cycle from lead generation to contract negotiation, onboarding, and long-term account growth. Build strong relationships with fleet operators, workshop owners, industrial customers, procurement teams, and key decision-makers. Monitor market trends, competitor activities, pricing, and customer buying behavior to identify growth opportunities. Collaborate closely with Technical, Supply Chain, Marketing, and Customer Service teams to deliver exceptional customer experience. Maintain accurate sales activities, forecasts, opportunities, and customer records using CRM systems and Microsoft Excel. Target Customer Segments Large transport and commercial fleet operators Construction and heavy equipment companies Oil & Gas companies, contractors, and service providers Manufacturing and industrial businesses Franchise workshops, service centers, and multi-location workshop networks What We're Looking For Strong B2B consultative selling and solution-based sales experience. Proven ability to negotiate based on value rather than price. Excellent objection-handling and competitive selling skills. Experience preparing professional proposals, quotations, presentations, and business cases. Strong commercial awareness, including margins, forecasting, profitability, and pipeline management. Advanced relationship-building, presentation, communication, and negotiation skills. Proficiency in Microsoft Excel and CRM systems. Qualifications & Experience Bachelor's degree in Business, Marketing, Engineering, or a related discipline. Minimum 5 years of experience in Business Development, B2B Sales, Key Account Management, or Industrial Sales. Experience within Lubricants, Automotive, Commercial Fleets, Industrial Products, Construction Equipment, or Oil & Gas industries is highly preferred. Demonstrated success in generating new business, winning strategic accounts, negotiating contracts, and consistently achieving sales targets. Willingness to travel for customer meetings, site visits, workshops, and industry events. Key Performance Indicators (KPIs) New customer acquisition and qualified lead generation. Sales revenue, volume, profitability, and market share growth. Conversion of competitor accounts. Proposal submission and win rate. Growth across fleet, construction, manufacturing, oil & gas, and workshop accounts. Sales forecast accuracy and pipeline management. Customer retention, repeat business, and key account development.

<strong>Your Job<br><br></strong>Koch Engineered Solutions (KES) is seeking an Electrician / Electrical Technician to support the construction department by maintaining, repairing, testing, and preparing electrical, electronic, and mechanical equipment used across projects and site operations.<br><br><strong>Our Team<br><br></strong>The role will support the KES Construction team, which delivers One-Source Solution projects covering design, fabrication, and installation for industrial customers. The team supports equipment installation and maintenance across refinery, petrochemical, power station, and heavy industrial facilities in the region.<br><br><strong>What You Will Do<br><br></strong><ul><li> Maintain, repair, calibrate, test, and troubleshoot electrical, electronic, and mechanical equipment used in project and site operations.</li><li> Prepare, organize, sort, pack, and coordinate equipment, cables, machines, and tools to ensure readiness for site execution.</li><li> Inspect equipment to identify faults, defects, errors, or maintenance requirements and support reliable equipment performance.</li><li> Provide onsite maintenance support during plant shutdowns, primarily at refineries and power stations.</li><li> Plan, organize, and prioritize work based on project requirements while maintaining accurate records.</li><li> Build constructive working relationships with colleagues and project teams to support safe and reliable execution.<br><br><br></li></ul><strong>Who You Are (Basic Qualifications)<br><br></strong><ul><li> Knowledge of electrical maintenance, troubleshooting, testing, and repair practices.</li><li> Electrical qualification or certification relevant to the role.</li><li> Exposure to the use of hand tools, power tools, multimeters, and related maintenance equipment.</li><li> Ability to communicate effectively in verbal and written form.</li><li> Knowledge of Health, Safety, and Environmental requirements and safe working practices.<br><br><br></li></ul><strong>What Will Put You Ahead<br><br></strong><ul><li> Competent soldering skills.</li><li> Exposure to maintaining and troubleshooting welding equipment, plasma machines, power distribution boards, grinders, cutting machines, air compressors, and electronic cables.</li><li> Knowledge of equipment maintenance activities within refinery, power generation, or industrial environments.</li><li> Exposure to supporting turnaround, shutdown, and project-site activities.<br><br><br></li></ul>At Koch companies, we are entrepreneurs. This means we openly challenge the status quo, find new ways to create value and get rewarded for our individual contributions. Any compensation range provided for a role is an estimate determined by available market data. The actual amount may be higher or lower than the range provided considering each candidate’s knowledge, skills, abilities, and geographic location. If you have questions, please speak to your recruiter about the flexibility and detail of our compensation philosophy.<br><br><strong>Who We Are<br><br></strong>Koch Engineered Solutions specializes in providing innovative technical and service solutions that can be applied in industrial value chains. The KES Equipment businesses provide uniquely engineered solutions in mass transfer, combustion and emission controls, filtration, separation, materials application, automation, and actuation.<br><br>At Koch, employees are empowered to do what they do best to make life better. Learn how our business philosophy helps employees unleash their potential while creating value for themselves and the company.<br><br>Additionally, everyone has individual work and personal needs. We seek to enable the best work environment that helps you and the business work together to produce superior results.

Hiring A Field Specialist for Oil & Gas exploration services.<br>Drill-bit field experience. Knowledge and experience with Underreamer operations would be an added advantage.<br>============================================The assignment will be fixed for 3 months with a Fixed Total salary as a package, and Field bonus of 150$ per day on the field. Client will be offering all the trainings, Safety induction, medical check, PPE, and transportation to and from Site. After the 3 months period, the assignment will be under on-call basis.================================================<br>Responsibilities Perform drill-well-on-paper planning and pre-job execution to align with the client's drilling program. Analyze client requirements and recommend appropriate drill bit selection and drilling parameters. Optimize drilling performance (ROP, bit life, dull grading) while ensuring safe execution. Provide on-site technical support during drilling operations across multiple well profiles, including deep gas wells. Conduct post-run analysis and reporting to support continuous improvement. Uphold QHSE standards, hazard identification, and safe work practices at all times. Coordinate with rig crews, clients, and internal teams to ensure smooth operations. Drill-bit field experience. Knowledge and experience with Underreamer operations would be an added advantage.(Where applicable) Support QA/QC activities, tool/equipment maintenance oversight, and review of process/technical packages. Qualifications & Experience Bachelor's degree in Mechanical Engineering (or related engineering discipline).3-5 years of field experience as a Drilling Field Engineer / Bit Man Prior experience with drill bit / drilling services providers or oilfield service companies. Experience with drilling performance optimization and pre-job engineering. Skills & Competencies Strong technical understanding of drilling operations and drill bit performance. Excellent communication and teamwork skills; comfortable in multi-disciplinary, client-facing environments. Strong safety orientation Flexible and adaptable to rotational / field-based assignments.

<strong>Join Our Engineering Team as an HVAC Technician at the First Vignette Collection in KSA!<br><br></strong><strong>We are looking for a skilled, professional, and experienced HVAC Technician to join the Engineering team at the First Vignette Collection in the Kingdom of Saudi Arabia (Carlton Al Moaibed Hotel).<br><br></strong>The HVAC Technician is responsible for maintaining, repairing, and troubleshooting air conditioning, ventilation, and refrigeration systems throughout the hotel while ensuring high standards of safety, efficiency, and guest comfort.<br><br>If you have strong technical skills and enjoy working in a dynamic hospitality environment, we invite you to join our team.<br><br><strong>Primary Responsibilities:<br><br></strong><ul><li> Perform preventive and corrective maintenance on HVAC and refrigeration systems.</li><li> Inspect, maintain, troubleshoot, and repair air conditioning and ventilation equipment.</li><li> Maintain and repair split AC units, package units, AHUs, FCUs, exhaust fans, and ventilation systems.</li><li> Check compressors, condensers, evaporators, expansion valves, thermostats, sensors, and other HVAC components.</li><li> Diagnose mechanical, electrical, and refrigeration faults in HVAC equipment.</li><li> Check refrigerant levels, pressure, temperature, and overall system performance.</li><li> Perform refrigerant charging, recovery, and leak detection when required.</li><li> Clean and maintain filters, coils, drain pans, air vents, and other HVAC components.</li><li> Check and maintain condensate drainage systems to prevent water leakage and damage.</li><li> Respond to guest room and hotel maintenance requests related to air conditioning and temperature control.</li><li> Carry out emergency repairs and attend HVAC breakdowns as required.</li><li> Ensure all HVAC equipment operates safely and efficiently according to manufacturer specifications.</li><li> Conduct regular inspections of guest rooms, public areas, offices, back-of-house areas, and other hotel facilities.</li><li> Record all maintenance activities, faults, repairs, and equipment conditions.</li><li> Follow the preventive maintenance schedule and complete assigned tasks on time.</li><li> Monitor the condition of HVAC equipment and report major faults or replacement requirements to the Engineering Supervisor or Chief Engineer.</li><li> Maintain proper stock levels of HVAC spare parts, tools, and materials and report shortages when required.</li><li> Use HVAC testing and diagnostic equipment correctly and safely.</li><li> Maintain the HVAC workshop, tools, equipment, and work areas in a clean and organized condition.</li><li> Follow all hotel engineering procedures, health &amp; safety requirements, and environmental standards.</li><li> Support the Engineering team with other maintenance activities when required.</li><li> Assist with energy-saving initiatives and ensure HVAC systems operate efficiently.</li><li> Coordinate with other departments to complete maintenance work with minimum disruption to hotel operations.</li><li> Maintain a professional appearance and wear the hotel uniform correctly at all times.</li><li> Perform any additional duties assigned by the Chief Engineer, Engineering Supervisor, or Engineering Management.<br><br></li></ul><strong>Requirements:<br><br></strong><ul><li> Previous experience as an HVAC Technician or in a similar technical position is preferred.</li><li> Previous experience in a hotel, commercial building, or facilities management environment is an advantage.</li><li> Good knowledge of HVAC, air conditioning, ventilation, and refrigeration systems.</li><li> Good knowledge of split AC, package units, AHU, FCU, exhaust fans, and ventilation systems.</li><li> Good knowledge of compressors, condensers, evaporators, expansion valves, thermostats, sensors, and refrigerant systems.</li><li> Ability to troubleshoot mechanical, electrical, and refrigeration faults.</li><li> Knowledge of refrigerant charging, recovery, and leak detection.</li><li> Ability to use HVAC tools and testing equipment, including pressure gauges, multimeters, thermometers, and other diagnostic tools.</li><li> Good knowledge of preventive and corrective maintenance procedures.</li><li> Basic knowledge of electrical systems related to HVAC equipment.</li><li> Good knowledge of HVAC safety procedures and safe handling of refrigerants.</li><li> Ability to read basic technical drawings, equipment manuals, and HVAC diagrams.</li><li> Strong troubleshooting and problem-solving skills.</li><li> Strong attention to detail and commitment to quality maintenance.</li><li> Ability to work efficiently in a fast-paced hotel environment.</li><li> Good communication and teamwork skills.</li><li> Ability to work under pressure and respond to emergency maintenance requests.</li><li> Flexibility to work shifts, including evenings, weekends, and public holidays.</li><li> Ability to work in hot, cold, and confined areas and stand for long periods.</li><li> Basic English communication skills are preferred.</li><li> Technical diploma, vocational certificate, or relevant HVAC qualification is an advantage.<br><br></li></ul><strong>What You Can Expect from Us:<br><br></strong><strong>What You Can Expect From Us<br><br></strong>We give our people everything they need to succeed. From a competitive salary that rewards all your hard work to a wide range of benefits designed to help you live your best work life – including a full uniform, impressive room discounts and some of the best training in the business.<br><br>Our mission is to welcome everyone and create inclusive teams where we celebrate difference and encourage colleagues to bring their whole selves to work. IHG Hotels &amp; Resorts provides equal employment opportunities to applicants and employees without regard to race, colour, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, or disability. We promote a culture of trust, support, and acceptance. Always welcoming different backgrounds, experiences, and perspectives.<br><br>IHG gives every member of the team the room they need to belong, grow and make a difference in a collaborative environment. We know that to work well, we need to feel well – both inside and outside of work – and through our my Wellbeing<br><br>framework, we are committed to supporting wellbeing in your health, lifestyle, and workplace.<br><br>So, join us and you’ll become part of our ever-growing global family.<br><br>Don't quite meet every single requirement, but still believe you'd be a great fit for the job? We'll never know unless you hit the 'Apply' button. Start your journey with us today<br><br>Don't quite meet every single requirement, but still believe you'd be a great fit for the job? We'll never know unless you hit the 'Apply' button. Start your journey with us today.

Job Summary: The QC Inspector performs inspection and testing of piping, civil, and mechanical construction activities to verify compliance with drawings, specifications, and applicable codes and standards.<br><br>Duties & Responsibilities:<br><br>Perform in-process and final inspections on piping, civil, and mechanical works. Witness hydrotests, NDE activities, and other required tests per the ITP. Verify materials, welding, and installation against approved drawings and specifications. Record inspection results and raise Non-Conformance Reports as required. Coordinate hold points and inspections with client/third-party inspectors. Maintain inspection records, checklists, and daily QC reports. Verify calibration status of measuring and test equipment used on site. Support punch-list generation and verification of closure. Ensure work fronts comply with approved method statements. Report quality issues and trends to the QC Manager. Support preparation of quality documentation for handover dossiers.<br><br>Requirements<br><br>Experience: 5+ years of experience as a QC Inspector on piping/civil/mechanical construction projects.<br><br>Education:<br><br>Diploma or Bachelor's degree in Mechanical/Civil Engineering. QC/inspection certification (e.g., CSWIP, CWI) preferred.<br><br>Required Skills & Abilities:<br><br>1- Core Competencies:<br><br>Attention to Detail Integrity Analytical Thinking Communication Skills Time Management<br><br>2- Technical Skills:<br><br>Piping/Civil Inspection Techniques Reading Isometrics, P&IDs, and Civil Drawings Welding Inspection Basics / NDE Awareness Inspection & Test Plans (ITPs) Measuring & Testing Equipment Use QC Documentation & Reporting

<p><strong>Position Summary</strong></p><p>We are seeking an <strong>Asset Predictive Analytics Engineer</strong> to support the deployment, configuration, and commissioning of predictive analytics and Asset Performance Management (APM) solutions for industrial facilities. The role will focus on monitoring asset health, developing predictive models, analyzing operational data, and supporting implementation of solutions such as AVEVA Predictive Analytics and related reliability platforms.</p><p><strong>Key Responsibilities</strong></p><ul><li>Support implementation and commissioning of predictive analytics and APM solutions.</li><li>Configure asset models, analytics, alerts, and performance monitoring dashboards.</li><li>Analyze operational, maintenance, and historian data to identify equipment anomalies and performance issues.</li><li>Support development of predictive maintenance and reliability initiatives.</li><li>Work closely with operations, maintenance, reliability, and process engineering teams.</li><li>Participate in asset criticality assessments and performance improvement studies.</li><li>Support integration with historians, CMMS, ERP, and other plant systems.</li><li>Prepare technical documentation, reports, and client presentations.</li><li>Participate in FAT, SAT, commissioning, and site acceptance activities.</li><li>Coordinate with technology vendors and project stakeholders during project execution.</li></ul><p><strong>Qualifications</strong></p><ul><li>Bachelor's degree in Chemical, Mechanical, Electrical, Instrumentation, Reliability, or related Engineering discipline.</li><li>3-5 years of experience in Asset Performance Management, Reliability Engineering, Predictive Analytics, or Industrial Digitalization.</li><li>Experience with AVEVA Predictive Analytics (APA), APM, PI System, Historians, or similar industrial analytics platforms is preferred.</li><li>Good understanding of rotating equipment, process equipment, maintenance, and reliability concepts.</li><li>Knowledge of data analytics, KPIs, condition monitoring, and predictive maintenance methodologies.</li></ul><p><strong>Skills</strong></p><ul><li>AVEVA Predictive Analytics (APA) or similar solutions.</li><li>Power BI, SQL, and basic Python knowledge.</li><li>Industrial Historians and Operational Data Analysis.</li><li>Reliability and Maintenance Engineering fundamentals.</li><li>Strong analytical and problem-solving skills.</li></ul><p><strong>Travel Requirements</strong></p><ul><li>Primary location: Al Khobar, Saudi Arabia.</li><li>Travel to client sites within KSA and GCC region will be required.</li><li>Extended site presence may be required during commissioning, SAT, startup, and hypercare phases.</li></ul><p><br></p>

<h3 >About the Role</h3> <p >DP WORLD is seeking a <strong >Port Captain</strong> to join their team in KSA. This full-time position requires 2-5 years of experience and involves overseeing vessel operations, crew management, and adherence to safety and operational standards. The role is based in the Eastern Region, covering cities such as Dammam, Al Khobar, Dhahran, Al Jubail, Al-Ahsa, Al Qatif, Ras Tannurah, Buqayq, and Al Khafji.</p> <h3 >Key Responsibilities</h3> <ul > <li >Manage vessel budgets for food provisions and housekeeping purchases.</li> <li >Maintain positive communication between vessel and office staff, promoting the safety and well-being of seafaring personnel.</li> <li >Conduct technical interviews for deck officer candidates and select suitable crew.</li> <li >Brief Masters, Officers, and crew on their roles, responsibilities, and company expectations before assignments.</li> <li >Liaise with the Personnel Department regarding travel, crew changes, and other personnel issues, monitoring crew 'overlap days'.</li> <li >Review vessel requisitions to ensure efficient and economical inventory and timely delivery of supplies.</li> <li >Monitor the performance of the bridge team and complete regular performance appraisals for Captains.</li> <li >Highlight high-potential candidates or underperforming crew to the Fleet Superintendent.</li> <li >Ensure all ship staff receive appropriate hand-over and familiarization upon joining.</li> <li >Oversee the general wellness and welfare of the crew.</li> <li >Conduct monthly on-board inspections of the ship's hull, cargo spaces, deck machinery, and safety equipment.</li> <li >Be present on board for offshore operations when special requirements arise.</li> <li >Liaise with the Operations Department and Vessel Master regarding certification, safety equipment, and loose lifting gear.</li> <li >Prepare vessel repair specifications in collaboration with the Engineering Superintendent/Port Engineer.</li> <li >Ensure adherence to IMCA guidelines and best industry practices for vessel DP operations, equipment, and personnel.</li> <li >Ensure the fleet's DP and navigational equipment is fully operational at all times.</li> </ul> <h3 >Qualifications and Experience</h3> <ul > <li >2-5 years of relevant experience in port or vessel operations.</li> <li >Demonstrated ability to manage vessel budgets and inventory effectively.</li> <li >Strong understanding of maritime safety regulations and crew welfare.</li> <li >Experience in conducting technical interviews and crew selection.</li> <li >Familiarity with IMCA guidelines and DP operations.</li> </ul> <h3 >Work Environment</h3> <p >This is a <strong >full-time</strong> position based in the Eastern Region of KSA, requiring regular on-board presence and travel across various cities including Dammam, Al Khobar, and Al Jubail. The role involves close collaboration with vessel crews, office staff, and various departments to ensure smooth and safe operations.</p> <h3 >Application Process</h3> <p >Interested candidates are encouraged to apply. Salary details will be discussed during the interview process.</p>

<strong>A Snapshot of your day<br><br></strong>Your day involves leading and coordinating a large team of field service specialists, technicians, and supervisors during outage and field execution activities, ensuring work is completed safely, efficiently, and to the highest quality standards. You oversee the assembly and disassembly of mechanical components, advanced I&amp;C commissioning, troubleshooting, and root cause investigations across gas turbines, steam turbines, generators, and associated auxiliary systems to maximize plant reliability and performance.<br><br><strong>How You’ll Make An Impact<br><br></strong><ul><li>Lead and coordinate outage execution activities, ensuring work is planned, scheduled, and delivered safely, efficiently, and within project scope.</li><li>Collaborate closely with Project Managers, customers, Operations Management, and Service Engineering teams to drive successful project outcomes and customer satisfaction.</li><li>Manage site resources, parts requirements, risks, delays, and customer communications, including leading meetings and providing regular progress updates and outage reports.</li><li>Apply advanced technical expertise and analytical problem-solving skills to resolve complex equipment, operational, and cross-functional challenges.</li><li>Provide leadership, mentoring, and technical guidance to multidisciplinary field teams while maintaining the highest standards of safety, quality, and operational excellence.<br><br><br></li></ul><strong>What You Bring<br><br></strong><ul><li>Bachelor’s degree in mechanical engineering with 10+ years of experience in power generation or heavy industrial environments.</li><li>Extensive expertise in rotating equipment, including gas turbines, steam turbines, generators, pumps, motors, and associated auxiliary systems.</li><li>Proven experience with Siemens advanced gas turbine technologies (SGT5-4000F, SGT-8000H, V-Series) as well as non-OEM equipment across outage, maintenance, and commissioning activities.</li><li>Strong knowledge of power plant operations, mechanical commissioning, preventive and corrective maintenance, machining, fabrication, welding, NDT, and maintenance management systems such as SAP.</li><li>Demonstrated leadership in managing multidisciplinary field teams, outage planning and scheduling, customer engagement, technical reporting, and execution of large-scale international field assignments.<br><br><br></li></ul><strong>About The Team<br><br></strong>Our Gas Services division offers Low-emission power generation through service and decarbonization. Zero or low emission power generation and all gas turbines under one roof, steam turbines and generators. Decarbonization opportunities through service offerings, modernization, and digitalization of the fleet.<br><br><strong>Who is Siemens Energy?<br><br></strong>At Siemens Energy, we are more than just an energy technology company. With ~100,000 dedicated employees in more than 90 countries, we develop energy systems of the future, ensuring that the growing energy demand of the global community is met reliably and sustainably. The technologies created in our research departments and factories drive the energy transition and provide the base for one sixth of the world's electricity generation.<br><br>Our global team is committed to making sustainable, reliable, and affordable energy a reality by pushing the boundaries of what is possible. We uphold a 150-year legacy of innovation that encourages our search for people who will support our focus on decarbonization, new technologies, and energy transformation.<br><br>Find out how you can make a difference at Siemens Energy: https://www.siemens-energy.com/employeevideo<br><br><strong>Our Commitment to Diversity<br><br></strong>Lucky for us, we are not all the same. Through diversity we generate power. We run on inclusion and our combined creative energy is fueled by over 130 nationalities. Siemens Energy celebrates character – no matter what ethnic background, gender, age, religion, identity, or disability. We energize society, all of society, and we do not discriminate based on our differences.<br><br><strong>Rewards/Benefits<br><br></strong><ul><li>Opportunities to work with a global team </li><li>Opportunities to work on and lead a variety of innovative projects </li><li>Access to a variety of employee resource groups </li><li>Competitive Salary Package<br><br><br></li></ul>https://jobs.siemens-energy.com/jobs<br><br>

Key Accountabilities:Checks, inspects all the electrical parts/equipment in the whole plant. Reports all abnormalities observed, notification generation against abnormalities. Plan layout and installation of electrical wiring, equipment and fixtures, based on job specifications and local codes. Test electrical systems and continuity of circuits in electrical wiring, equipment, and fixtures, using testing devices such as ohmmeters, voltmeters, and oscilloscopes, to ensure compatibility and safety of system. Inspect electrical systems, equipment, and components to identify hazards, defects, and the need for adjustment or repair, and to ensure compliance with codes. Connect wires to circuit breakers, transformers, or other components. Diagnose malfunctioning systems, apparatus, and components, using test equipment and hand tools, to locate the cause of a breakdown and correct the problem Assemble, install, test, and maintain electrical or electronic wiring, equipment, appliances, apparatus, and fixtures, using hand tools and power tools Reporting of any abnormality noticed in the equipment while executing the preventive maintenance work order. Notification generation against the abnormality observed in the equipment’s. Provide assistance during emergencies by operating floodlights and generators, placing flares, and driving needed vehicles. Execute activities related to his/her function in safe and environmental friendly methods.<br>Qualifications, Experience, Knowledge:Diploma in Mechanical, Electrical, or Mechatronics Engineering.3–5 years of relevant work experience, preferably in the paper or tissue manufacturing industry. Fair proficiency in English (reading, writing, and communication). Good troubleshooting and problem-solving skills. Good interpersonal and communication skills.

In a world of possibilities, pursue one with endless opportunities. Imagine Next!<br><br>At Parsons, you can imagine a career where you thrive, work with exceptional people, and be yourself. Guided by our leadership vision of valuing people, embracing agility, and fostering growth, we cultivate an innovative culture that empowers you to achieve your full potential. Unleash your talent and redefine what’s possible.<br><br><strong>Job Description<br><br></strong>Parsons is looking for an amazingly talented <strong>Sr. Electrical Engineer </strong>to join our team! The Site Sr. Electrical Engineer is responsible for day-to-day site Electrical work. The role ensures that all works are executed in accordance with approved drawings, specifications, codes, and project standards, with particular focus on luxury hotel/resort requirements, guest comfort, safety, and operational efficiency. <strong>Solid experience in hospitability projects (5 stars hotels/resorts - completed projects) is a must.<br><br></strong><strong>What You'll Be Doing<br><br></strong><ul><li>Review and comment on all the technical documents related to the Electrical work including and limited to Shop Drawings, Material Submittals, Method Statement, ITPs, inspection requests, and test reports related to construction.…etc.</li><li>Prepare technical reports, daily/weekly progress inputs, and support snagging and de-snagging.</li><li>Supervise construction of electrical infrastructure works including external LV networks, feeders, utility interfaces, road/landscape lighting, earthing and lightning protection.</li><li>Supervise building electrical works including LV distribution boards, cabling, lighting and emergency lighting, small power, and power to equipment.</li><li>Check that all works comply with approved drawings, specifications, and relevant codes.</li><li>Coordinate on site with civil, mechanical, ELV, and architectural teams to avoid clashes.</li><li>Attend site/coordination meetings and report site issues, constraints, and required actions.</li><li>Follow up testing and commissioning activities and support system handover.</li><li>Assist in verification of as-built drawings and O&amp;M documentation against site conditions.<br><br><br></li></ul><strong>What Required Skills You'll Bring<br><br></strong><ul><li>Bachelor’s degree in Electrical Engineering from an accredited university.</li><li>Minimum 8 years’ experience in large-scale projects.</li><li>Strong attention to detail and quality.</li><li>Ability to work under pressure, to tight deadlines, and in a fast-track environment.</li><li>Team player, proactive, with problem-solving mindset.</li><li>Knowledge of international procedures, design guides, automated and administrative practices.</li><li>Good knowledge of LV distribution, lighting, earthing, and basic ELV interfaces.</li><li>Ability to read and interpret electrical drawings and specifications.</li><li>Basic computer skills (MS Office; AutoCAD an advantage).</li><li>Strong attention to detail, good communication, and ability to work under pressure.<br><br><br></li></ul>Parsons equally employs representation at all job levels no matter the race, color, religion, sex (including pregnancy), national origin, age, disability or genetic information.<br><br>We truly invest and care about our employee’s wellbeing and provide endless growth opportunities as the sky is the limit, so aim for the stars! Imagine next and join the Parsons quest—APPLY TODAY!<br><br>Parsons is aware of fraudulent recruitment practices. To learn more about recruitment fraud and how to report it, please refer to https://www.parsons.com/fraudulent-recruitment/.

<strong>Description<br><br></strong>Tuwaiq Casting &amp; Forging is seeking a technically competent and safety-conscious Utility Operator to join the Maintenance Department within the Operations Division. Reporting to the Utilities Specialist, this role works within the Utilities shift team to operate utility services including air, water, electricity, wastewater treatment, and other plant utilities, safely, environmentally responsibly, and efficiently in accordance with standard operating procedures and process control parameters, supporting the operational targets of all utility consumers across melting, casting, forging, heat treatment, and machining operations.<br><br><strong>Key Responsibilities<br><br></strong><ul><li>Adhere to EHS regulations and guidelines and maintain a safe working environment at all times</li><li>Contribute to reporting and resolving near misses and incidents, and conduct site inspections</li><li>Maintain high standards of quality for supplied utilities in accordance with work instructions and Standard Operating Procedures (SOPs), and coordinate utility sample collection as required</li><li>Complete and monitor daily, weekly, and monthly utility production and operation reports accurately in the system</li><li>Monitor utility raw materials, consumable materials, and outsourced services required to ensure smooth utility operations</li><li>Support maintenance activities including taking equipment offline, isolating, tagging, and bringing utility equipment or systems back online following repair completion</li><li>Assist with on-site and off-site hands-on training and coaching of newly hired, incoming, or existing utility operators</li><li>Conduct plant patrolling tours and complete shift inspection records</li><li>Report EHSS incidents and accidents promptly</li><li>Submit utility shift reports as required</li><li>Initiate ordering of required raw materials and chemical consumables</li><li>Raise maintenance requests to address equipment issues</li><li>Escalate serious utility operation and maintenance risks to the Utilities Specialist</li><li>Suggest operational, equipment, or process improvements.<br><br></li></ul><strong>Requirements<br><br></strong>Education<br><br><ul><li>Technical Certificate or Diploma in Mechanical, Electrical, Utilities, Industrial Maintenance, or an equivalent field.<br><br></li></ul><strong>Experience<br><br></strong><ul><li>Minimum 3 years of experience in utilities operation or maintenance in an industrial, manufacturing, foundry, forging, or heavy manufacturing environment (for Diploma or Technical Certificate holders)</li><li>Minimum 6 years of relevant utilities operation experience (for High School certificate holders)</li><li>Experience in the operation and maintenance of utility systems such as compressed air, water systems, electrical distribution, wastewater treatment, LPG, technical gases, pumps, compressors, chillers, or cooling systems is preferred.<br><br></li></ul>Technical Skills<br><br><ul><li>Ability to operate and monitor utility systems including air, water, electricity, wastewater treatment, and other plant utility services in accordance with SOPs and operating parameters</li><li>Proficiency in plant patrolling, routine inspection, parameter monitoring, and accurate shift reporting</li><li>Ability to support maintenance activities including equipment isolation, tagging, shutdown, repair coordination, and startup following maintenance completion</li><li>Capability to monitor utility consumables, chemicals, spare parts, and raw materials to ensure uninterrupted operation</li><li>Ability to troubleshoot abnormal utility conditions and coordinate with maintenance teams for swift service restoration.</li></ul>

Jobe Scope<br>Provide engineering governance, troubleshooting, and technical support for Maintenance Engineering Support Section to improve equipment reliability, integrity, and maintenance effectiveness.<br>Key Duties, Responsibility & Accountabilities <br>Ensure compliance with SATORP HSSE, regulatory, and technical requirements across all Maintenance Engineering activities. Provide strategic leadership and oversight of Maintenance Engineering programs, including maintenance cost optimization, risk-based maintenance, failure analysis, and asset performance improvement initiatives. Provide Engineering leadership and coordination for Routine maintenance, Critical Equipment maintenance, Turnarounds, shutdowns and asset integrity initiatives. Govern Engineering standards, Maintenance strategies, and Maintenance procedures to ensure safe, compliant, and optimized asset performance. Direct and approve troubleshooting activities and Maintenance Engineering recommendations to mitigate operational risks and enhance equipment reliability. Ensure the effective development, implementation, and continuous improvement of preventive, predictive, corrective and condition-based Maintenance programs for Mechanical and Instrumentation assets. Oversee the monitoring of equipment reliability, Maintenance effectiveness, recurring failures, and technical risks, ensuring timely corrective actions and sustainable performance improvements. Foster a culture of technical excellence, continuous improvement, and operational discipline through effective leadership, coaching, and development of Maintenance Engineering personnel. Define departmental priorities, allocate resources, and ensure the successful delivery of Maintenance Engineering objectives in alignment with business and operational goals. Govern spare parts optimization strategies to ensure the availability of critical materials while balancing reliability, operational risk, and cost effectiveness. Ensure effective utilization of CMMS to control maintenance activities, minimize reliability risks, and sustain asset integrity.<br><br>Requirements Bachelor’s Degree in Mechanical/Instrumentation Engineering or a related discipline.10-15 years of experience in relevant refinery, petrochemical experience<br>Job Specific Skills <br>Proven team leadership experience. Proficiency in SAP/CMMS and applicable reporting tools Risk-based maintenance and spare parts optimization Knowledge of HSSE, PTW/LOTO, quality, and documentation requirements<br>Preferred Certificates CMRP

<p>Heavy Equipment Operators – Multiple Positions</p><p><strong>Saudi Nationals | Eastern Province, Saudi Arabia</strong></p><p><br></p><p>We are supporting a <strong>well-established Saudi organisation</strong> with the continued expansion of its operations in the Eastern Province and are looking to hire experienced <strong>Heavy Equipment Operators across multiple equipment categories</strong>.</p><p><br></p><p>This is an excellent opportunity for experienced Saudi operators to join a <strong>large, established operation</strong> offering a professional working environment, long-term career opportunities and exposure to a broad range of heavy equipment and operational activities.</p><p><br></p><p><strong><u>Positions Available</u></strong></p><p>We are interested in experienced operators across:</p><ul><li><strong>Crane Operators</strong></li><li><strong>Forklift Operators</strong></li><li><strong>Excavator Operators</strong></li><li><strong>Bulldozer / Dozer Operators</strong></li><li><strong>Wheel Loader Operators</strong></li><li><strong>Grader Operators</strong></li><li><strong>JCB / Backhoe Operators</strong></li><li><strong>Bobcat / Skid-Steer Operators</strong></li><li><strong>Roller / Compactor Operators</strong></li><li><strong>Telehandler / Telescopic Operators</strong></li><li><strong>Manlift Operators</strong></li></ul><p><br></p><p>Candidates will be assessed and matched to the most appropriate position based on their <strong>specific equipment experience, years of operation and valid licences/certifications</strong>.</p><p><br></p><p><strong><u>What We're Looking For</u></strong></p><ul><li><strong>Saudi national – mandatory</strong></li><li>Previous professional experience operating one or more of the equipment types listed above</li><li>Valid <strong>Saudi licence and/or relevant operator certification</strong></li><li>Strong understanding of <strong>safe equipment operation and HSE procedures</strong></li><li>Ability to carry out <strong>pre-operational inspections and basic equipment checks</strong></li><li>Experience working within <strong>heavy equipment, construction, industrial, infrastructure, oil &amp; gas or major project environments</strong> would be advantageous</li><li>Able to provide copies of relevant <strong>operator licences and certificates</strong></li></ul><p><br></p><p>Successful candidates will join an established working environment with opportunities to work alongside experienced operational and technical teams across a diverse heavy-equipment portfolio.</p><p><br></p><p>We are interested in speaking with operators at different experience levels and will match successful candidates to the position most appropriate to their <strong>equipment specialism and experience</strong>.</p><p><br></p><p><strong><u>How to Apply</u></strong></p><p>If you are a <strong>Saudi national</strong> with professional Heavy Equipment Operator experience, please apply with your updated CV.</p><p>Please ensure your CV clearly shows:</p><p><strong>• The equipment you have operated</strong></p><p><strong>• How many years you have operated each type</strong></p><p><strong>• Your current licences/operator certifications</strong></p><p>Shortlisted candidates will be required to provide copies of their relevant licences and certifications.</p><p><br></p><p><strong>Saudi nationals only.</strong></p>

We are conducting a search on behalf of a major offshore drilling operator in Saudi Arabia for a Senior Manager – Technical to lead strategic and technical oversight of fleet equipment, maintenance, and reliability across offshore rig operations.<br>Role Overview:This role owns the strategic and technical direction of the fleet's maintenance and reliability function — spanning CMMS, well control, Field Support, and capital equipment management — while driving compliance, longevity, and continuous improvement initiatives across the offshore asset base.<br>Key Responsibilities:Lead Technical Support, Well Control, and Maintenance & Reliability department strategy, goals, and standards Manage department budgets, resources, and tools Oversee SAP CMMS implementation and standardized maintenance practices fleet-wide Direct offshore Field Support teams supporting rig-based mechanical, electrical, and well control integrity Develop 5-year equipment inspection and maintenance philosophies Provide strategic technical input into annual maintenance budgets Lead equipment downtime incident investigations and corrective actions Evaluate new technologies for rig implementation Support SPS, reactivation, and upgrade projects across the fleet<br>Qualifications & Experience:Bachelor's degree in Engineering Minimum 15 years' experience in Oil & Gas, including 5+ years in a Technical Managerial role Proven leadership in Offshore Technical Troubleshooting, Maintenance & Project Management<br>Skills:Strong leadership, mentoring, and team development capability Advanced technical problem-solving across offshore fleet operations Advanced Microsoft Excel & Microsoft Project proficiency Working knowledge of document control systems and databases<br>If you have the relevant experience—or know someone who would be a great fit—I would be happy to discuss this opportunity in complete confidence. Please send me a direct message or share your CV at info@liberaconsultants.com.