وظائف مهندس ميكانيكا معدات ثقيلة

<p>SUPERVISES: Ship's power plant All systems and all mechanisms on board Refrigerated equipment Ship electrical equipment, Home appliance devices on board Spare parts for systems and mechanisms, tools, materials and other property related to the mechanical department Ship technical service Logbooks and engine room documentation Registration and inventory books of the engine room</p><p>RESPONSIBILITIES: Engine room team Crew members who are not members of the engine room when they are in the engine room Comply with the requirements of this document Issuing orders and instructions for the engine room Follow the instructions and orders of the company Comply with the requirements of the flag state documents and the requirements of the technical supervision authorities in relation to the ship and her technical systems</p><p><strong>Desired Candidate Profile</strong></p><p>QUALIFICATIONS: Any person applying for the position of chief engineer must meet the requirements of the Safety Management System (SMS) of the Company, meet the requirements of the Flag Administration Read, write, speak spoken English The person appointed to the position of chief engineer must have a good knowledge of one of the working languages of the Company. To be a leader for the crew, communicative, respectful to the people around him, ready to show the correct and necessary actions by his own example for subordinates, adequately perceive criticism and remarks Have a specialized education not lower than the criteria set by the Flag Administration</p>

Senior Field Service Engineer – MV Drives & Soft Starter Systems We are seeking an experienced Senior Field Service Engineer to support the installation, commissioning, startup, maintenance, troubleshooting, and upgrade of Medium Voltage Variable Speed Drive (VSD) and Soft Starter systems across industrial and energy projects worldwide. The successful candidate will provide on-site technical expertise, lead field activities, and ensure the reliable operation of critical electrical drive systems for our customers. Key Responsibilities As a Senior Field Service Engineer, you will:Perform installation, commissioning, startup, refurbishment, maintenance, troubleshooting, and upgrades of Medium Voltage Soft Starters and Variable Speed Drive (VSD) systems, including:Voltage Source Inverters (VSI) Load Commutated Inverters (LCI) Applications for pumps, compressors, turbines, and other rotating equipment Provide rapid response and technical support for emergency repairs and field service interventions. Deliver technical guidance and training to customer personnel on the operation, maintenance, calibration, and troubleshooting of drive systems. Diagnose complex electrical and control system issues and implement effective corrective actions. Lead and supervise on-site teams, contractors, and skilled technicians during project execution. Prepare accurate technical reports, service records, inspection reports, timesheets, expense reports, and customer documentation. Coordinate material requirements, quotations, and field execution planning activities. Ensure all work is executed in compliance with company and customer HSE requirements and industry best practices. Maintain a strong safety culture while delivering high-quality technical services. Provide detailed outage and maintenance reports to support future reliability and asset performance improvements. Required Qualifications Bachelor's Degree in Electrical Engineering. Minimum 7 years of field service experience in industrial electrical systems. Proven experience with:Medium Voltage Variable Speed Drives (VSDs) Medium Voltage Soft Starters Industrial motor control systems Commissioning and troubleshooting activities Preferred Experience Strong expertise in VSI and LCI drive technologies. Previous experience supporting applications involving:Pumps Compressors Turbine starting systems Heavy industrial processes Experience managing field projects and coordinating multidisciplinary teams. Strong knowledge of electrical power systems, control systems, and rotating equipment applications. Candidate Profile Customer-focused with excellent interpersonal skills. Ability to work independently with minimal supervision. Strong organisational and project management capabilities. Excellent written and verbal communication skills. Proven ability to troubleshoot and resolve complex technical issues in demanding environments. Committed to delivering high-quality service while maintaining the highest safety standards. Additional Requirements Willingness to travel in Saudi Arabia up to 80% of the time. Valid driving licence. Flexibility to work remotely and at customer sites worldwide. Strong commitment to HSE and operational excellence. Location: Saudi Arabia Experience: 7+ Years Industry: Power Generation, Oil & Gas, Utilities, Industrial Manufacturing Employment Type: Full-Time This role offers the opportunity to work on critical industrial assets and cutting-edge drive technologies while supporting major energy and industrial clients worldwide.

A Snapshot of Your Day:<br><br>As a Mechanical Technician on the Dammam Tooling Center (DTC) floor team, you will collaborate closely with the technical team to ensure the optimal performance of mechanical equipment and systems. Your role will involve installing, calibrating, and repairing various mechanical components while conducting quality assurance tests to maintain high operational standards.<br><br>How You’ll Make an Impact:<br><br>Assist mechanical engineers in developing technical solutions for mechanical devices and systems. Install, calibrate, and repair components of mechanical devices and systems. Fabricate and assemble new or modified mechanical components for machinery and equipment. Conduct quality assurance/control tests and procedures. Prepare inspection, inventory, and discrepancy reports. Support tooling control, storage, and operational readiness.<br><br><br>What You’ll Bring:<br><br>A Mechanical Diploma or higher technical qualification. Hands-on experience with various types of tooling, including standard, precision, and power tools. Familiarity with forklift operation and handling. Proficiency in reading, writing, and communicating in both English and Arabic. Experience in using digital applications for inventory management and database record keeping. Strong teamwork, collaboration, and communication skills.<br><br><br>About The Team<br><br>Our Gas Services division offers Low-emission power generation through service and decarbonization. Zero or low emission power generation and all gas turbines under one roof, steam turbines and generators. Decarbonization opportunities through service offerings, modernization, and digitalization of the fleet.<br><br>Who is Siemens Energy?<br><br>At Siemens Energy, we are more than just an energy technology company. With ~100,000 dedicated employees in more than 90 countries, we develop the energy systems of the future, ensuring that the growing energy demand of the global community is met reliably and sustainably. The technologies created in our research departments and factories drive the energy transition and provide the base for one sixth of the world's electricity generation.<br><br>Our global team is committed to making sustainable, reliable, and affordable energy a reality by pushing the boundaries of what is possible. We uphold a 150-year legacy of innovation that encourages our search for people who will support our focus on decarbonization, new technologies, and energy transformation.<br><br>Find out how you can make a difference at Siemens Energy: https://www.siemens-energy.com/employeevideo<br><br>Our Commitment to Diversity<br><br>Lucky for us, we are not all the same. Through diversity we generate power. We run on inclusion and our combined creative energy is fueled by over 130 nationalities. Siemens Energy celebrates character – no matter what ethnic background, gender, age, religion, identity, or disability. We energize society, all of society, and we do not discriminate based on our differences.<br><br>Rewards/Benefits:<br><br>Competitive Salary Package Targeted Bonus Opportunities to work on a variety of innovative projects<br><br><br>https://jobs.siemens-energy.com/jobs

<p>Lead QA/QC inspections for pressure vessels, tanks, and heat exchangers in Oil &amp; Gas or petrochemical projects, ensuring compliance with ASME, API, and Aramco standards; certified CWI or CSWIP with ASNT Level II in NDT (UT, PT, MT, RT, VT); proficient in ASME, API, AWS, and relevant fabrication/inspection codes; review and approve WPS, PQRs, and welder qualifications; monitor NDT activities and personnel; manage outsourced fabrication/inspection, coordinate with vendors and third-party inspectors; prepare ITPs, inspection reports, and final quality dossiers; interface with clients for hold/witness points, DCL submissions, and testing; handle NCRs, corrective actions, technical clarifications, and drive quality improvements.</p><p><strong>Desired Candidate Profile</strong></p><p>Experience : 5-10 Years Qualification : B.E. - Mechanical Specialization : Manufacturing of pressure vessels, tanks, heat exchangers, Pipings</p>

<p>Under general supervision, performs preventive/predictive maintenance and repair of a variety of mechanical equipment relative to their assigned location. Possesses intermediate diagnostic/troubleshooting knowledge and skills. Performs advanced function testing to verify equipment readiness after maintenance. Must be proficient in understanding/interpreting mechanical schematics/drawings/prints. Knowledge of part identification and system search to enable accurate procurement of spares. Ensures adherence, accurate input, and maintenance of data into Halliburton&amp;aposs system of record. This role is responsible for following specific and detailed work processes within the Halliburton Management System (HMS) during daily job activities. Performs own work and mentors others as directed. Responsible for ensuring duties are performed in a safe, efficient, and effective manner. Job tasks, correctly performed, impact indirectly on cost containment, efficiency, profitability or operations. Consequences of error are easily measured and can be confined.</p><p><strong>Desired Candidate Profile</strong></p><p>A high school diploma or equivalent and 3 years of experience in related mechanical fields are required. A Technical School certificate is preferred.</p>

<h3 >About Egis</h3> <p >Egis is an international firm active in architecture, consulting, construction engineering, and mobility services, with operations spanning 100 countries. In the Middle East, Egis employs 3,500 professionals across 8 countries, having successfully delivered over 700 complex development projects that stimulate economic growth and enhance quality of life in the region.</p> <h3 >The Role: MEP Design Lead Mechanical</h3> <p >Egis is seeking an experienced <strong >MEP Design Lead Mechanical</strong> to join its dynamic engineering team in Jeddah, Saudi Arabia, within the Makkah region. This full-time leadership position requires 5-10 years of experience and involves overseeing the mechanical design aspects of critical airport infrastructure projects. The role ensures compliance with international standards and Saudi Building Code requirements, leading a team of mechanical engineers and designers, and driving innovation and excellence in MEP system design while managing complex coordination across multiple disciplines.</p> <h3 >Key Responsibilities</h3> <ul > <li >Lead and mentor a team of mechanical engineers and design professionals on airport and aviation facility projects.</li> <li >Develop comprehensive mechanical design solutions for HVAC, plumbing, fire protection, and related systems in airport environments.</li> <li >Manage the mechanical design phase from concept through construction documentation.</li> <li >Coordinate with architects, electrical engineers, and other disciplines to ensure seamless system integration and clash-free designs.</li> <li >Utilize BIM and advanced design software to create detailed mechanical models and construction documents.</li> <li >Ensure all designs comply with Saudi Building Code, international standards, and airport-specific requirements.</li> <li >Conduct design reviews and quality assurance checks to maintain high standards of accuracy and completeness.</li> <li >Prepare technical specifications, calculations, and design reports for airport projects.</li> <li >Collaborate with clients, consultants, and contractors to address design challenges and implement solutions.</li> <li >Monitor project timelines and budgets while maintaining design excellence.</li> <li >Stay current with industry best practices and emerging technologies in MEP design.</li> </ul> <h3 >Required Qualifications and Experience</h3> <ul > <li >5-10 years of experience in MEP design, with a focus on mechanical systems.</li> <li >Advanced proficiency in MEP design software.</li> <li >Comprehensive knowledge of mechanical systems.</li> <li >Strong understanding of Saudi Building Code and international design standards.</li> <li >Expertise in BIM modeling and coordination.</li> <li >Project management experience.</li> <li >Familiarity with airport-specific mechanical requirements.</li> </ul> <h3 >Essential Skills and Competencies</h3> <ul > <li >Excellent analytical and problem-solving skills.</li> <li >Strong communication and interpersonal skills.</li> <li >Demonstrated leadership and mentoring capabilities.</li> </ul> <h3 >Work Location and Type</h3> <p >This is a full-time position based in Jeddah, Saudi Arabia, within the Makkah region. The role involves working on significant airport infrastructure projects.</p>

Role Summary: The Mechanical Quality Engineer (Piping, Welding, Coating & NDT) is responsible for assuring and controlling the quality of piping fabrication and installation, welded joints, protective coating systems, and non-destructive testing activities for the JESCO / Arcelor Mittal Tubular Products Al-Jubail Heat Treatment and Finishing Line Project. The role provides owner-side surveillance of EPC contractors, subcontractors, vendors, and third-party inspection agencies from material receipt and fabrication through erection, testing, pre-commissioning, turnover, and final dossier close-out. The incumbent ensures compliance with approved project specifications, drawings, Inspection and Test Plans, welding and coating procedures, applicable Saudi requirements, and relevant ASME, API, ASTM, AWS, ISO, SSPC/AMPP, and ASNT standards.<br>Job Duties & Responsibilities:Review and approve contractor quality documents, including Project Quality Plans, Inspection and Test Plans, method statements, field inspection checklists, welding procedure specifications and qualification records, NDT procedures, coating procedures, pressure-test packages, and turnover dossiers. Perform surveillance and inspection of shop and field piping activities, including material receiving, identification and traceability, storage and preservation, fit-up, joint preparation, welding, supports, flange alignment, bolt tightening, cleanliness, reinstatement, and system completion. Verify piping materials, fittings, flanges, valves, gaskets, welding consumables, and coating materials against approved drawings, specifications, purchase orders, material requisitions, MTCs, heat numbers, and positive material identification requirements. Witness and verify welder and welding-operator qualifications, WPS/PQR compliance, welding consumable control, preheat and inter pass temperature, heat input, joint sequencing, visual inspection, weld repair, and post-weld heat treatment activities where applicable. Coordinate and monitor NDT activities, including VT, PT, MT, UT, RT, and advanced methods when specified; verify technician certification, equipment calibration, technique sheets, examination coverage, acceptance criteria, reports, film or digital-image quality, and repair-cycle closure. Inspect surface preparation and coating application, including environmental conditions, abrasive and coating batch control, surface cleanliness and profile, stripe coating, wet and dry film thickness, holiday testing, adhesion testing, curing, repair, and final acceptance in accordance with the approved coating system. Witness piping pressure and leak testing, line flushing or blowing, drying, chemical cleaning where applicable, valve testing, punch-list clearance, and reinstatement; confirm calibrated test instruments, test boundaries, temporary supports, safety controls, and complete test records. Review isometric drawings, P&IDs, line lists, plot plans, weld maps, spool drawings, support details, vendor drawings, specifications, and approved technical queries to confirm construction and inspection compliance. Raise inspection observations and Non-Conformance Reports for deviations; support root-cause analysis, corrective and preventive actions, concession or repair review, verification of implementation, and timely close-out. Maintain inspection status, weld and NDT traceability, coating records, NCR and punch-list logs, quality KPIs, and weekly progress reports; identify recurring defects and recommend preventive improvement actions. Coordinate with Project Management, Engineering, Construction, HSE, Operations, EPC contractors, vendors, authorized inspectors, and third-party agencies to resolve quality issues without compromising safety, code compliance, or project schedule. Support mechanical completion, system handover, pre-commissioning, and final quality dossier review, ensuring all records are complete, legible, traceable, approved, and aligned with the project turnover index.<br>Education & Experience:Bachelor’s degree in mechanical engineering or equivalent discipline Minimum 8-10 years of QA/QC experience in piping, welding, coating, and NDT for industrial construction, steel, oil and gas, petrochemical, power, or process-plant projects. At least 3 years in an owner, client, PMC, or lead site-quality role supervising EPC contractors, subcontractors, and third-party inspection agencies. Demonstrated field experience with carbon steel, stainless steel, and alloy-steel piping fabrication and installation, welding control, NDT coordination, coating inspection, pressure testing, and turnover documentation. Experience reviewing and implementing ITPs, WPS/PQRs, welder qualifications, NDT procedures, coating procedures, inspection requests, test packs, NCRs, punch lists, and final manufacturing or construction dossiers. Experience on Heat Treatment and Finishing Line, steelmaking, pipe manufacturing, or comparable heavy-industrial projects is preferred; Saudi Arabia or GCC project experience is an advantage.<br>Skills:Excellent technical knowledge and quality-control skills Strong leadership and contractor-management abilities Effective communication, reporting, and coordination skills Strong analytical, problem-solving, and decision-making abilities Good planning, organization, teamwork, and time-management skills

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Title:</b></p><br><br>Sr. Rotating Equipment Engineer - Design &amp; Construction<br><br><p>Under general supervision, independently applies advanced engineering techniques, makes decisions on engineering problems and methods, and represents the organization in conferences to resolve important questions or to negotiate with key engineers and officials of other organizations. Provides technical guidance to designers and less experienced engineers and is consulted extensively by associates and others with a high degree of reliance placed on scientific interpretations and advice. Job role is responsible for a measurable asset such as an assigned staff and budget. Skills are typically acquired through an undergraduate degree in Engineering and a minimum of 7 years related experience, with average experience ranging from 10+ years.</p><br><br><br><br><br> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> No experience required </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

<h3 >About Baker Hughes</h3> <p >Baker Hughes is committed to advancing energy solutions, striving to make them safer, cleaner, and more efficient for people and the planet. The company's teams collaborate to effectively enable and sustain change, aiming to improve overall performance and operational excellence.</p> <h3 >Role Overview</h3> <p >As an Electro Mechanical Technician, you will be responsible for the troubleshooting, testing, assembly, disassembly, and visual inspection of mechanical assemblies. This full-time role, based in Dhahran, Eastern region, also involves assisting in the repair and modification of non-conforming equipment, executing all required tests with minimal instruction.</p> <h3 >Key Responsibilities</h3> <ul > <li >Review procedures to ensure accuracy in assembly, disassembly, and test verification.</li> <li >Configure test stations and systems as required.</li> <li >Analyze and interpret data derived from environmental tests, and troubleshoot identified equipment problems.</li> <li >Assist Engineering and Reliability groups in setting up experiments and accurately recording experimental data.</li> <li >Test and evaluate the performance of general purpose test equipment, performing repairs if necessary.</li> <li >Provide leadership and coaching to other technicians in areas where competence has been established.</li> <li >Ensure all work is conducted in strict compliance with Health, Safety, and Environmental (HS&amp;E) policies and procedures.</li> </ul> <h3 >Required Qualifications and Skills</h3> <ul > <li >A 2-year technical diploma or an Associate's degree in an Electrical/Electronics field or higher.</li> <li >At least 2 years of relevant experience in an electro-mechanical function, preferably within the oil and gas industry.</li> <li >Advanced skills in soldering, assembling, and troubleshooting electro-mechanical devices.</li> <li >Ability to read and accurately interpret blueprints, wiring diagrams, assembly prints, and parts lists.</li> <li >Proficiency in the use of measurement and gauging equipment and associated processes.</li> <li >Proficiency in operating multimeters, megohmmeters, hi-pot testers, and other fundamental instruments.</li> </ul> <h3 >Work Environment and Location</h3> <p >This is a full-time position based in Dhahran, located within the Eastern region. The role operates within a team-oriented environment focused on maintaining high standards of safety and operational efficiency.</p> <h3 >Benefits</h3> <ul > <li >Access to contemporary work-life balance policies and wellbeing activities.</li> <li >Comprehensive private medical care options.</li> <li >A safety net including life insurance and disability programs.</li> <li >Tailored financial programs.</li> <li >Additional elected or voluntary benefits.</li> </ul>

<div> Duties and Responsibilities: <br><ul> <li> <p>Perform routine, preventive, and emergency mechanical maintenance work in accordance with approved policies and procedures.</p> </li> <li> <p>Monitor the performance of production units and ensure they operate within designated operational limits, reporting any observations that may affect equipment efficiency.</p> </li> <li> <p>Identify the tools and equipment required for maintenance, assess their readiness, and carry out preventive maintenance to ensure their continuous availability.</p> </li> <li> <p>Organize and store maintenance tools in their designated locations, maintain them properly, and ensure proper disposal of maintenance waste.</p> </li> <li> <p>Carry out mechanical repair work such as welding, cutting, and refurbishing replaced parts to ensure their readiness and efficiency.</p> </li> <li> <p>Comply with safety procedures before starting work, including verifying the necessary permits and lockout/tagout forms.</p> </li> <li> <p>Perform any other tasks assigned by the direct supervisor.</p> </li> </ul> Required Qualifications: <br><ul> <li> <p>Diploma in Mechanical Engineering or any related field.</p> </li> </ul></div>

<ul><li>Conduct routine maintenance on electromechanical systems to ensure optimal performance and reduce downtime.</li><li>Diagnose and troubleshoot malfunctions in complex machinery, utilizing both electrical and mechanical expertise.</li><li>Install, test, and validate new equipment, ensuring compliance with safety and operational standards.</li><li>Collaborate with engineering teams to improve existing designs and enhance system efficiency.</li><li>Document all maintenance and repair activities meticulously to maintain accurate service records.</li><li>Utilize advanced diagnostic tools and software for precise analysis and resolution of technical issues.</li><li>Assist in the development of preventive maintenance schedules to prolong equipment lifespan.</li><li>Train and mentor junior technicians on best practices and safety protocols within the workspace.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Educational background in electromechanical technology, electrical engineering, or a related field.</p></li><li><p>Relevant certifications such as Certified Maintenance & Reliability Technician (CMRT) or similar.</p></li><li><p>Familiarity with PLC programming and control systems is highly desirable.</p></li><li><p>Proficiency in reading and interpreting schematics and technical manuals.</p></li><li><p>Ability to work in high-pressure environments while maintaining attention to detail.</p></li><li><p>Maintains and repairs generator mechanical and electrical systems. </p></li></ul>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>We are looking for motivated, customer-focused people who want to join our team as a Reliability Maintenance Engineer. The focus of the Reliability Maintenanc- Experience using CMMS (Computerized Maintenance Management Systems) to plan proactive maintenance and record reactive tasks Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and nee</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Experience in Electrical/Mechanical/Electronics and Communication/Instrumentation and Controls</li><li>Experience using CMMS (Computerized Maintenance Management Systems) to plan proactive maintenance and record reactive tasks</li></ul><p></p></section>

<p>We are urgently looking for an Assistant QA/QC to join a leading industrial manufacturing company in Saudi Arabia. Candidates with experience in mechanical factories are highly preferred.</p><p><strong>Desired Candidate Profile</strong></p><p>Experience working in a mechanical factory is preferred.</p><p>Knowledge of quality assurance and quality control processes is an advantage.</p><p>Detail-oriented with good inspection and documentation skills.</p><p>Able to work in a fast-paced industrial environment.</p><p>Willing to work in Saudi Arabia.</p>

Job Title Position Title: MEP Project/Site Engineer Location: Dubai<br>Role Overview The MEP Project/Site Engineer is responsible for the on-site management, coordination, and delivery of all Mechanical, Electrical, and Plumbing (MEP) installation works in Riyadh-based projects. The role ensures that MEP systems are executed in compliance with Saudi Building Code (SBC), Civil Defense requirements, approved designs, safety standards, and project schedules, while maintaining high quality and cost control.<br>Key Responsibilities1. MEP Site Management & Coordination Lead and manage all on-site MEP installation activities, including HVAC, electrical, plumbing, fire protection, and ELV systems. Coordinate MEP works with civil, structural, and architectural teams to ensure smooth interfaces and sequencing. Ensure site activities are executed in accordance with approved drawings, method statements, and project programs. Ensure effective coordination of MEP, civil, architectural, and structural works to avoid interface conflicts and construction delays.<br>2. Design & Technical Coordination Review and coordinate MEP shop drawings, material submittals, and technical clarifications with consultants and subcontractors. Ensure all MEP installations comply with Saudi Building Code (SBC), Saudi Civil Defense, SEC, NWC, and other relevant authority (e.g., MODON) requirements. Support resolution of design conflicts and site technical issues.<br>3. Subcontractor & Workforce Management Manage and supervise MEP subcontractors and site labor to ensure productivity, quality, and safety compliance. Monitor workmanship and enforce quality standards through inspections and site checks. Ensure subcontractors follow approved safety plans and site HSE procedures.<br>4. Authority Approvals & Compliance Coordinate inspections and approvals with Saudi Civil Defense and other local authorities related to MEP systems. Ensure all installations meet statutory requirements and are ready for authority testing and certification.<br>5. Procurement & Material Control Support procurement activities by reviewing technical specifications and assisting in supplier and material evaluations. Monitor delivery, storage, and installation of MEP materials and equipment to avoid delays and quality issues. Ensure materials and equipment meet approved submittals and project specifications.<br>6. Installation Progress, Testing & Commissioning Monitor and report MEP installation progress against the project schedule. Coordinate testing, commissioning, and pre-commissioning activities for all MEP systems. Ensure proper documentation, as-built drawings, and O&M manuals are prepared for handover.<br>7. Issue Resolution & Continuous Improvement Identify and resolve technical, quality, safety, and progress-related issues on site. Proactively propose constructability improvements and value engineering solutions while maintaining compliance and performance. Capture lessons learned to improve installation efficiency and site coordination.<br>8. Package Interface & Risk Management Identify, manage, and mitigate interface risks arising from split contracts and multiple subcontractors. Develop and maintain package interface matrices, responsibility demarcation documents, and sequencing plans to mitigate scope gaps and interface risks. Maintain a live interface risk register and ensure responsibilities are clearly assigned and communicated. Manage cross-trade coordination meetings and resolve interface-related conflicts between subcontractors to avoid delays and claims. Lead coordination workshops with consultants, subcontractors, and internal teams to resolve interface and sequencing challenges.<br>Qualifications & Experience Bachelor’s degree in Mechanical, Electrical, or Building Services Engineering (or equivalent). Minimum 5–7 years of MEP installation experience, with at least 3–5 years in Saudi Arabia. Saudi Council of Engineers (SCE) Professional Accreditation is required. Proven experience managing MEP works on industrial facilities, logistics warehouses, large commercial, or infrastructure projects. Strong knowledge of Saudi Building Code (SBC), Saudi Civil Defense requirements, and local authority approval processes. Hands-on experience with split-package or multiple subcontractor MEP management. Strong site coordination, problem-solving, and leadership skills. Hands-on experience in Project management systems for project tracking, submittals, and site reporting (such as Aconex, Procore, BIM, Primavera, etc.)<br>Skills & Competencies Strong leadership and on-site management capabilities. Excellent coordination, communication, and problem-solving skills. High level of cost awareness and commercial acumen. Ability to work effectively in a multicultural and fast-paced environment. Fluency in English and Arabic is essential; Chinese is advantage.

<div dir="rtl"><h3 >نبذة عن الوظيفة</h3> <p >تبحث <strong >شركة نفود العاذريه للمقاولات</strong> عن <strong >فني ميكانيكي محركات</strong> للانضمام إلى فريقها المتخصص في منطقة <strong >الباحة</strong>. تهدف هذه الوظيفة بدوام كامل إلى ضمان الأداء الأمثل للمحركات والمعدات الميكانيكية من خلال الإشراف على تركيبها، وتشخيص أعطالها، وتنفيذ أعمال الصيانة الدورية والطارئة.</p> <h3 >المهام والمسؤوليات الرئيسية</h3> <ul > <li >متابعة عمليات تركيب المحركات الميكانيكية والإشراف على إجراءات تشغيلها.</li> <li >تحديد القطع التبديلية المطلوبة، ومطابقة مواصفاتها الفنية، والعمل على تأمينها.</li> <li >تنفيذ إجراءات استلام المحركات الميكانيكية لغايات الخدمة والإصلاح.</li> <li >فحص وتشخيص أعطال المحركات الميكانيكية ومتابعة عمليات إصلاحها.</li> <li >معالجة جميع المشكلات المتعلقة بالمعدات الميكانيكية.</li> <li >القيام بالأعمال الروتينية للمعدات الميكانيكية.</li> <li >الالتزام بسياسات وإجراءات الصحة والسلامة والبيئة المعمول بها في الشركة.</li> </ul> <h3 >المتطلبات الأساسية</h3> <ul > <li >خبرة عملية تتراوح بين <strong >سنتين إلى خمس سنوات</strong> في مجال ميكانيكا المحركات أو صيانة المعدات الميكانيكية.</li> </ul> <h3 >بيئة العمل</h3> <p >تتطلب هذه الوظيفة التفرغ للعمل بدوام كامل ضمن فريق <strong >شركة نفود العاذريه للمقاولات</strong> في مدينة <strong >الباحة</strong>. سيعمل الفني في بيئة ديناميكية تتطلب الالتزام بمعايير الصحة والسلامة المهنية الصارمة لضمان سلامة العمليات والمعدات.</p> <h3 >تفاصيل إضافية</h3> <p >الراتب لهذه الوظيفة <strong >غير معلن</strong> وسيتم تحديده بناءً على الخبرة والمؤهلات خلال عملية التوظيف.</p> <h3 >التقديم للوظيفة</h3> <p >ندعو المرشحين المؤهلين والمهتمين بهذه الفرصة إلى تقديم طلباتهم للنظر فيها.</p></div>

<p>Provides highly visible customer support through the performance of on-site installation, as well as overseeing any necessary diagnoses, troubleshooting, service, and repair of complex equipment and systems. Checks out and approves operational quality of system equipment. Instructs customers in the operation and maintenance of the system. Serves as company liaison with customer on administrative and technical matters for assigned projects. Interprets customers needs and clarifies if the responsibility for problem resolution falls to sales personnel, customer support reps, or engineers. This job may include any aspect of field support, and is not limited to system hardware and software, PCs, and networking/wireless networking.</p><p>With immediate effect we are looking for a motivated Technical Field Service Engineer (f/m/d) for the region Middle East to support our Industrial Field Service Engineering Team based in Saudi Arabia.</p><p><b><br></b></p><p><b>Your Role</b></p><ul><li>Provide phone support/remote assistance to customers and to Field Service Representatives as required to achieve resolution of service need in a timely manner.</li><li>Order spare parts for assigned customers including replenishing spare parts kits for warranty and contract customers, to ensure they can operate their Varex equipment according to technical and safety guidelines with the highest level of satisfaction.</li><li>Input detailed records of service visits into company information systems, including technical problems, actions taken, and parts employed to correct these problems, to ensure accurate updated customer maintenance information is available to other Varex parties.</li><li>Maintain up-to-date technical documentation, in order to permanently keep informed regarding all operating characteristics, design factors, technical performance and developments of Varex products.</li><li>Maintain a high degree of professional knowledge and safety consciousness according to Varex guidelines in order to perform activities under the safest working conditions.</li><li>Assist in the development of new servicing techniques and the writing of service documentation.</li><li>May provide training to other field personnel.</li><li>Report by means of FSR s, time sheets, expense reports, etc. regularly to ensure accurate company statistical data on customer-oriented activities is available.</li><li>Answering common customer inquiries and incoming calls.</li><li>Close collaboration with our Field Service Team in Europe.</li><li>Frequent travel to customer sites mianly in the region Middle East to perform outlined duties.</li></ul><p>We offer</p><ul><li>An international work environment.</li><li>A multifaceted area of responsibility with challenging tasks.</li><li>Training and Development opportunities.</li><li>Over-time Compensation.</li><li>Participation in our Employee Incentive Bonus Plan.</li><li>A competitive compensation package.</li></ul><p><strong>Desired Candidate Profile</strong></p><p>Knowledge of and sound professional experience with electronic and electro-mechanical engineering, testing equipment used for verification, checkout and calibration of electronic equipment. B.S. in Electrical Engineering or equivalent. Knowledge of and sound professional technical experience with micro-computers/PC based systems. 3-5 years experience in a similar position. Customer focused attitude an previous experience in customer relation is highly desirable. Articulate and skilled in interpersonal communication. Fluency in the local language (Arabic) and in English, both written and spoken. Ability to identify and repair complex software and network problems. Highly proficient at diagnosing and solving complex mechanical problems, including simple vacuum leaks. Identify and resolve imaging system defects. Sound computer usage and debugging skills. Proficient in utilizing business tools such as: E-mail, Microsoft Word, Excel, and PowerPoint. Experience with SAP or equivalent ERP product and productivity software scuh as Sales Force is desired. Openness to work in a global team and to travel frequently.</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p><strong>About the Role:</strong><br>We are seeking a highly motivated Planning Engineer to join our Technical Support team. The successful candidate will be responsible for planning, scheduling, and controlling plant maintenance activities to ensure the safe, reliable, and efficient operation of the plant. This role requires close coordination with the Maintenance and Operations teams to optimize preventive and corrective maintenance activities while maximizing plant availability.<br><strong>Key Responsibilities:</strong><br>Plan, schedule, and monitor preventive and corrective maintenance activities using SAP.<br>Review maintenance notifications and work orders to ensure completeness, progress, and timely closure.<br>Develop and maintain preventive maintenance task lists, maintenance plans, and schedules.<br>Coordinate planned shutdowns and annual outages using MS Project to optimize maintenance execution and minimize downtime.<br>Analyze equipment failures and maintenance reports to recommend improvements to preventive maintenance strategies.<br>Coordinate with maintenance disciplines and operations to execute routine maintenance and outage activities.<br>Process and monitor warranty defect notifications and coordinate warranty claims.<br>Prepare monthly, quarterly, annual, and ad-hoc maintenance performance reports for management.<br>Maintain equipment master data, maintenance history, and configuration information within SAP.<br>Recommend and implement continuous improvements to maintenance planning processes and procedures.<br>Support effective utilization of maintenance resources and improve planning efficiency.<br>Ensure compliance with company policies, legal requirements, contractual obligations, and Integrated Management System (IMS) requirements.<br>Participate in Health, Safety, Security, Environmental, and Quality programs and promote a strong safety culture.<br>Support hazard identification, risk assessments, incident investigations, and implementation of corrective and preventive actions.<br>Provide on-the-job training and support the development of maintenance personnel.<br>Perform other duties as assigned by management.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p><strong>Qualifications:</strong><br>Bachelor's degree in Mechanical, Electrical, or Instrumentation Engineering.<br>Master's degree is considered an advantage.<br><br><strong>Experience:</strong><br>Minimum 8 years of experience in maintenance planning and scheduling within a power generation, utilities, or industrial plant environment.<br>Experience using SAP Plant Maintenance (PM) and maintenance planning tools is essential.<br><br><strong>Skills &amp; Competencies:</strong><br>Strong knowledge of preventive and predictive maintenance principles.<br>Hands-on experience with SAP PM as an end user.<br>Proficiency in Microsoft Project, Microsoft Office, and Outlook.<br>Strong analytical, planning, and organizational skills.<br>Ability to coordinate effectively with cross-functional teams.<br>Excellent communication and reporting skills in English.<br>Knowledge of Quality, Health, Safety, and Environmental Management Systems.<br>Strong problem-solving and decision-making abilities.<br>Ability to prioritize work based on operational and business requirements.<br><br><strong>Working Conditions:</strong><br>Plant-based role requiring occasional work near operating mechanical equipment and outdoor environments.<br>May involve exposure to elevated work areas, noise, airborne particles, chemicals, electrical equipment, and varying weather conditions while adhering to all applicable safety procedures.</p><p></p></section>

Applus<br><br>4 days ago<br><br>On-site<br><br>Riyadh, Riyadh Province, Saudi Arabia<br><br>Description<br><br>About Applus+:<br><br>Applus+ is a global leader in inspection, testing, and certification services, delivering innovative solutions across key industries including energy, construction, environment, and infrastructure. Operating in more than 70 countries, we are committed to helping clients achieve operational excellence while maintaining the highest safety and environmental standards. At Applus+, we foster a culture of integrity, technical leadership, and continuous professional development.<br><br>Location: Riyadh, Saudi Arabia<br><br>Role Summary:<br><br>The HSE Engineer will be responsible for monitoring and ensuring compliance with Health, Safety, and Environmental (HSE) requirements across road and infrastructure construction activities. The role will support the implementation of project HSE plans, applicable Saudi regulations, client requirements, and safe working practices.<br><br>Key Responsibilities:<br><br>Conduct regular HSE inspections across road, bridge, and infrastructure construction areas. Monitor contractors and subcontractors' compliance with HSE plans, risk assessments, method statements, PTW, and safe work procedures. Identify unsafe acts, conditions, and HSE non-conformities and follow up on corrective actions. Monitor key construction activities including traffic management, excavation, demolition, lifting, working at height, electrical, hot works, heavy equipment, and utility works. Monitor site housekeeping, PPE compliance, access routes, barricading, signage, and general site safety. Participate in toolbox talks, HSE inductions, safety awareness activities, and emergency drills. Report serious hazards, incidents, near misses, and significant HSE violations to the HSE management team. Support incident investigations, HSE audits, inspections, and corrective action follow-up. Prepare and maintain HSE reports, inspection records, checklists, and other required documentation. Coordinate with contractors, subcontractors, engineers, and project teams to ensure safe execution of construction activities.<br><br>Requirements<br><br>Bachelor’s degree in Engineering, Occupational Health and Safety, Environmental Engineering, or a related field.<br><br>Valid Saudi Council of Engineers (SCE) membership.<br><br>Minimum 7 years of HSE experience in construction projects in KSA, preferably in road and bridge construction.<br><br>Strong knowledge of construction HSE requirements, risk assessments, traffic management, and major construction hazards.<br><br>Experience in contractor and subcontractor HSE management.<br><br>Strong inspection, reporting, communication, and problem-solving skills.<br><br>Ability to work in shifts according to project requirements.<br><br>Proficiency in English.<br><br>job#on Apply" target="_blank" rel="noopener noreferrer" href="https://apply.workable.com/applus/j/40E3492F45/apply?utm_id=16441949&utm_source=HSE+Jobs+in+The+GCC">Apply now<br><br>More jobs<br><br>Hse Supervisor<br><br>El Seif<br><br>Senior Manager - Fire, Life Safety Planning (MAS291)<br><br>Qiddiya Investment Company<br><br>Key Responsibilities:<br><br>Conduct regular HSE inspections across road, bridge, and infrastructure construction areas. Monitor contractors and subcontractors' compliance with HSE plans, risk assessments, method statements, PTW, and safe work procedures. Identify unsafe acts, conditions, and HSE non-conformities and follow up on corrective actions. Monitor key construction activities including traffic management, excavation, demolition, lifting, working at height, electrical, hot works, heavy equipment, and utility works. Monitor site housekeeping, PPE compliance, access routes, barricading, signage, and general site safety. Participate in toolbox talks, HSE inductions, safety awareness activities, and emergency drills. Report serious hazards, incidents, near misses, and significant HSE violations to the HSE management team. Support incident investigations, HSE audits, inspections, and corrective action follow-up. Prepare and maintain HSE reports, inspection records, checklists, and other required documentation. Coordinate with contractors, subcontractors, engineers, and project teams to ensure safe execution of construction activities.<br><br>Requirements<br><br>Bachelor’s degree in Engineering, Occupational Health and Safety, Environmental Engineering, or a related field.<br><br>Valid Saudi Council of Engineers (SCE) membership.<br><br>Minimum 7 years of HSE experience in construction projects in KSA, preferably in road and bridge construction.<br><br>Strong knowledge of construction HSE requirements, risk assessments, traffic management, and major construction hazards.<br><br>Experience in contractor and subcontractor HSE management.<br><br>Strong inspection, reporting, communication, and problem-solving skills.<br><br>Ability to work in shifts according to project requirements.<br><br>Proficiency in English.