وظائف مهندس مبيعات - الاحساء السعودية

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ol><li><p>Lead and manage LEED certification processes from project initiation to final certification approval.</p></li><li><p>Prepare, review, and submit LEED documentation through relevant certification platforms.</p></li><li><p>Coordinate with architects, MEP engineers, contractors, and consultants to achieve targeted LEED credits.</p></li><li><p>Monitor project compliance with LEED requirements and sustainability objectives.</p></li><li><p>Conduct LEED scorecard reviews, gap analyses, and sustainability assessments.</p></li><li><p>Advise project teams on sustainable building design strategies and green building best practices.</p></li><li><p>Evaluate energy efficiency, water conservation, indoor environmental quality, and sustainable materials.</p></li><li><p>Review energy models and building performance simulations.</p></li><li><p>Analyze energy consumption, carbon emissions, and environmental impacts.</p></li><li><p>Support renewable energy integration and decarbonization initiatives.</p></li><li><p>Ensure compliance with local environmental regulations and sustainability standards.</p></li><li><p>Prepare sustainability reports, technical documentation, and project KPI tracking reports.</p></li><li><p>Conduct sustainability workshops, LEED coordination meetings, and site inspections.</p></li><li><p>Liaise with certification bodies, clients, and regulatory authorities.</p></li><li><p>Provide technical guidance and mentor junior sustainability engineers and coordinators.</p></li></ol></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ol><li><p>Bachelor's degree in Mechanical Engineering, Electrical Engineering, Environmental Engineering, Architecture, or a related discipline.</p></li><li><p>7–10 years of experience in sustainability engineering, green building projects, and LEED certification management.</p></li><li><p>Mandatory LEED Accredited Professional (LEED AP) certification.</p></li><li><p>LEED AP BD+C certification preferred.</p></li><li><p>Additional certifications such as WELL AP, ESTIDAMA PQP, or BREEAM Assessor will be an advantage.</p></li><li><p>Strong knowledge of LEED rating systems, green building standards, and sustainability best practices.</p></li><li><p>Experience in energy modeling and building performance analysis.</p></li><li><p>Good understanding of HVAC systems, lighting systems, water conservation, and renewable energy technologies.</p></li><li><p>Proficiency in EnergyPlus, IES VE, eQUEST, AutoCAD, Revit, and Microsoft Excel.</p></li><li><p>Excellent communication, coordination, and stakeholder management skills.</p></li><li><p>Ability to work with multidisciplinary teams and manage multiple sustainability initiatives simultaneously.</p></li></ol><p></p></section>

This role will be based in Eastern, KSA. We are looking for candidates who are available to join at short notice.

<div dir="rtl"><h3 >نبذة عن الدور</h3> <p >تبحث شركة زومان محمد الهاجري وشركاه للمقاولات عن <strong >مهندس مدني</strong> للانضمام إلى فريقها في الأحساء، المنطقة الشرقية. يتطلب هذا الدور خبرة تتراوح بين 2 إلى 5 سنوات، ويهدف إلى الإشراف على الجوانب الهندسية للمشاريع الإنشائية من التصميم وحتى التنفيذ، مع ضمان مطابقة أعلى معايير الجودة والمواصفات.</p> <h3 >المهام والمسؤوليات الرئيسية</h3> <ul > <li >دراسة الجوانب الطبوغرافية والجيولوجية للمواقع الإنشائية، بالإضافة إلى تحليل نتائج اختبارات فحص التربة.</li> <li >تحليل المتطلبات والمخططات المعمارية للمشاريع لضمان التكامل الإنشائي.</li> <li >تحديد أعماق التأسيس المناسبة للمشروع وإجراء تحليل إنشائي شامل لجميع عناصره.</li> <li >إعداد التصاميم الإنشائية ومتابعة إعداد المخططات الهندسية وتدقيقها، بالإضافة إلى تدقيق جداول الكميات والمواصفات الفنية للمواد الإنشائية.</li> <li >الإشراف المباشر على مراحل تنفيذ المشاريع لضمان مطابقتها للمواصفات والتصاميم المعتمدة.</li> <li >تطوير وتحسين أساليب وإجراءات العمل الهندسية ومواكبة أحدث التطورات التقنية في المجال.</li> <li >إعداد الوثائق والتقارير المتخصصة المتعلقة بالأعمال والمشروعات الهندسية، وتوضيح نسبة التقدم، وحفظها في قاعدة البيانات المخصصة وفقاً للسياسات والإجراءات المعتمدة.</li> </ul> <h3 >المؤهلات والخبرات المطلوبة</h3> <ul > <li >درجة جامعية في الهندسة المدنية من جامعة معترف بها.</li> <li >خبرة عملية تتراوح بين <strong >2 إلى 5 سنوات</strong> في مجال الهندسة المدنية والمشاريع الإنشائية.</li> <li >فهم عميق للمبادئ الهندسية الإنشائية ومعايير البناء.</li> </ul> <h3 >المهارات والكفاءات</h3> <ul > <li >القدرة على تحليل البيانات الطبوغرافية والجيولوجية.</li> <li >مهارات ممتازة في التصميم الإنشائي واستخدام برامج التصميم الهندسي.</li> <li >دقة عالية في تدقيق المخططات وجداول الكميات والمواصفات.</li> <li >مهارات إشرافية قوية لضمان جودة التنفيذ ومطابقة المواصفات.</li> <li >القدرة على إعداد التقارير الفنية والوثائق المتخصصة بوضوح ودقة.</li> <li >مهارات تواصل فعالة والقدرة على العمل ضمن فريق.</li> </ul> <h3 >بيئة العمل</h3> <p >هذا الدور متاح بنظام <strong >الدوام الكامل</strong> في مدينة الأحساء بالمنطقة الشرقية. الراتب الخاص بالوظيفة غير معلن في الوقت الحالي.</p> <h3 >معلومات إضافية</h3> <p >ندعو المهندسين المدنيين المؤهلين والذين يتمتعون بالخبرة المطلوبة للتقديم على هذه الفرصة ضمن فريق شركة زومان محمد الهاجري وشركاه للمقاولات.</p></div>

<div dir="rtl"><h3 >نبذة عن الدور</h3> <p >تعلن شركة زومان محمد الهاجري وشركاه للمقاولات عن حاجتها لتوظيف <strong >مهندس سلامة وصحة مهنية</strong> للعمل بدوام كامل في مدينة الأحساء بالمنطقة الشرقية. يهدف هذا الدور إلى الإشراف على إعداد وتطوير أسس وإجراءات السلامة والصحة المهنية في مواقع العمل، وتحديد الأخطار المحتملة، وضمان توفير واستخدام مستلزمات السلامة، بالإضافة إلى إعداد الوثائق والتقارير المتخصصة بنتائج الأعمال. تتطلب الوظيفة خبرة تتراوح من 0 إلى 1 سنة.</p> <h3 >المهام والمسؤوليات الرئيسية</h3> <ul > <li >إعداد وتطوير أسس وإجراءات وتعليمات السلامة والصحة المهنية، بما في ذلك سياسات السلامة وتعليمات العمل الآمن والإخلاء ولجان السلامة وسجلات الفحص الطبي، ومتابعة اعتمادها والالتزام بها.</li> <li >تحديد مكامن الأخطار الميكانيكية والكهربائية والكيميائية في موقع العمل ووضع الإشارات والملصقات التحذيرية المناسبة.</li> <li >إعداد قوائم ببنود وكميات ومواصفات معدات ومستلزمات السلامة والصحة المهنية، ومتابعة توفيرها والتزام العاملين باستخدامها.</li> <li >تطوير أساليب وإجراءات العمل ومواكبة التطورات التقنية في مجال السلامة والصحة المهنية.</li> <li >إعداد الوثائق والتقارير المتخصصة المتعلقة بالأعمال والمشروعات الهندسية ونسب تقدمها، وعرضها وتوضيحها وحفظها في قاعدة البيانات الخاصة بها وفقاً للسياسات والإجراءات المعتمدة.</li> </ul> <h3 >متطلبات الخبرة</h3> <p >يتطلب هذا الدور خبرة عملية تتراوح من <strong >0 إلى 1 سنة</strong> في مجال السلامة والصحة المهنية أو في مجال هندسي ذي صلة.</p> <h3 >المعرفة والقدرات الأساسية</h3> <ul > <li >فهم شامل لأسس وقواعد وإجراءات السلامة والصحة المهنية.</li> <li >القدرة على تحديد وتقييم الأخطار المهنية وتطوير إجراءات الوقاية منها.</li> <li >مهارات قوية في إعداد الوثائق والتقارير الفنية وحفظها.</li> <li >القدرة على متابعة التطورات التقنية وتطبيقها لتحسين إجراءات العمل.</li> </ul> <h3 >المساهمة في بيئة العمل</h3> <p >سيلعب شاغل الوظيفة دوراً محورياً في تعزيز ثقافة السلامة والصحة المهنية داخل الشركة، من خلال تطبيق أفضل الممارسات وضمان بيئة عمل آمنة ومطابقة للمعايير. يتطلب الدور التزاماً بالدقة والحرص على التفاصيل في جميع المهام الموكلة.</p> <h3 >معلومات إضافية</h3> <p >الراتب لهذه الوظيفة <strong >غير معلن</strong>. ندعو المهتمين الذين يستوفون المتطلبات المذكورة أعلاه إلى تقديم طلباتهم.</p></div>

About the Role<br>We are seeking a highly skilled, hands-on Datacenter Engineer to lead and execute data center infrastructure deployments and field implementations across customer sites. This is a project‑driven, deployment-focused role, requiring strong multi‑vendor experience, ownership of onsite delivery, and close coordination with customers, OEMs, and internal teams.<br>About Sycomp<br>Sycomp is a global IT services and logistics provider with extensive expertise in cloud, data center, endpoint management and security solutions. Sycomp’s diverse team of consultants and engineers deliver on the company’s mission to tackle challenging global IT projects through its state-of-the-art integration and warehouse centers and global technology partnerships. Headquartered in the heart of Silicon Valley, California, Sycomp has successfully shipped, deployed and managed complex IT projects and supporting assets in more than 150 countries helping its Fortune 500 customers and global partners realize a world without boundaries<br>Note, this is a contractor role, 12 months extendable.<br>Key Responsibilities<br>Lead and execute end‑to‑end rack deployments, including rack mounting, bolt‑down, structured cabling (fiber and copper), power integration, grounding, and equipment labeling. Perform onsite installation, configuration, and commissioning of servers, routers, switches, firewalls, and wireless equipment from OEMs such as Cisco, Juniper, Arista, Fortinet, HPE, and Dell. Own site delivery and acceptance, working directly with customers, OEM engineers, and Sycomp project teams. Conduct fiber and copper termination, patching, OTDR testing, and performance validation to ensure network integrity and reliability. Validate LAN/WAN connectivity, redundancy, failover, and security configurations against approved designs. Provide advanced troubleshooting and root cause analysis during installation and post‑deployment support. Produce and maintain as‑built documentation, rack elevations, test results, and handover reports. Ensure all onsite work adheres to data center operational standards, safety procedures, and ESD best practices. Act as a technical lead on site, mentoring and guiding junior engineers and field technicians.<br>Required Skills & Experience<br>Strong hands‑on experience in data center deployments and field engineering. Proven ability to work in multi‑vendor network and compute environments. Solid expertise in:Structured cabling systems (fiber & copper) Rack integration and power layout Network hardware installation and validation Experience performing OTDR testing and interpreting fiber test results. Ability to read and execute engineering designs, rack elevations, and cabling schematics. Strong customer‑facing communication and onsite coordination skills. Self‑driven, quality‑focused, and comfortable owning end‑to‑end delivery.<br>Nice to Have<br>Prior experience in large‑scale or multi‑site data center deployments Exposure to acceptance testing and commissioning sign‑off Leadership or site‑lead experience on customer projects<br>Technology Means the World to Us<br>Technology connects people, enables business, fosters innovation, and helps organizations operate without boundaries. Every day, Sycomp’s diverse team delivers on the company’s mission to help customers and partners navigate the complexity of global IT—from cloud and data center computing to cyber security, networking, and integration and logistics across more than 150 countries.<br>If you thrive in a growth-minded and values-driven culture, Sycomp may be your next career adventure. At Sycomp, you will have the opportunity to work in a global setting, collaborate with cross-functional teams, and be part of a dynamic and growing organization.<br>Sycomp is known for its strong culture and commitment to employee growth. With a 93% company-wide retention rate, we foster an environment where people can make a meaningful impact, develop professionally, and build rewarding careers over the long term.<br>Learn more about Sycomp and our employee benefits at: https://sycomp.com/careers/<br>Sycomp is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, religion, color, age, sex, national origin, sexual orientation, gender identity, disability status, veteran status, or any other protected characteristic.<br>Sycomp will provide reasonable accommodation for qualified individuals with disabilities as needed. If you need assistance or an accommodation in applying, please contact our Human Resources Department at careers@sycomp.com<br>Sycomp may use automated tools, including artificial intelligence, to support certain aspects of the recruitment process, such as reviewing applications or identifying relevant experience. These tools assist our teams, and all hiring decisions are made following human review.

We are looking for an experienced Field Service Engineer for a 12-month extendable contract in Saudi Arabia.???? Location: KSA – Site Based, primarily Eastern Region???? Contract: 12 Months, Extendable???? Experience: 5+ Years The role is site-based across KSA, with most assignments expected in the Eastern Region. Key Requirements:Minimum 5 years of relevant experience Hands-on RTU & Open Enterprise (OE) experience – mandatory Strong experience in commissioning and troubleshooting Good understanding of RTU interfacing and integration Strong knowledge of both hardware and software Experience with networking, field instrumentation and industrial communication protocols Open Enterprise training/exposure Comfortable working across different project/site locations in KSAOffshore safety requirements/certifications such as BOSIET, H2S and ODUK medical would be relevant Driving Licence is a plus Candidates with up to 30 days' notice can be considered

Job Role :Review Civil Scope of Work and Design, Method Statements, Project Quality Plan and Project Quality Control Procedure, Project Specification & Standards Implement Quality Management System at sites Carry out Civil work activities inspection in the site Coordinate with the consultant's representative and Site In-charge for all types of inspections to get their approval Review material submittals before client submission Inspect all incoming material with reference to (MIRN) inspection procedure Implement / use automation management tools such as unifier, oracle system etc. Review, Inspect & monitor subcontractor activities at site if adhering to QMS requirements Attend weekly meetings with client Attend and address Internal and client audit, Close the concerns highlighted in the form of NCs or observations Follow up site issues with Project/site managers Prepare reports for the quality manager/supervisor of the company to highlight issues, detail the number of nonconformance made, and explain where improvements can be made Update weekly status to the departmental Supervisors/managers through Quality management & Tracking System (QMTS). Maintain quality records such as logbook of the work performed, Quality weekly report, Internal inspection report, Non-Conformance report (NCR), Design change request (DCR), tracking sheets, lesson learnt etc.<br>Qualifications:<br>Bachelor’s degree in Civil Engineering or a related field. Minimum 3 years of experience in civil QA/QC, with proven experience in substation projects. Good knowledge of civil construction methods, inspection procedures, and quality standards. Experience with concrete works, foundations, earthworks, roads, drainage, and other substation civil works. Ability to read and interpret engineering drawings and project specifications. Good communication and coordination skills. Ability to work effectively on construction sites and coordinate with multiple project stakeholders. Preferred Experience with electrical substation construction projects. Knowledge of applicable international standards and client specifications.

This role will be based in Eastern, KSA. We are looking for candidates who are available to join at short notice.<br>Hands on experience with BROHLE marine and yacht control systems, especially implemented on shiplifts, handling shiplift automation and control systems, including PLCs, HMI/SCADA, software, drives, and instrumentation.

Overall Purpose of Role To lead and coordinate day to day construction execution on site, acting as the right hand to the Construction Manager and ensuring pipeline and associated facility works are delivered safely, on schedule, and in full accordance with approved engineering drawings, specifications, and Saudi Aramco standards. The role supports the Construction Manager in translating project plans into field execution, providing technical and supervisory oversight across all onshore construction work fronts including ROW works, trenching, welding, lifting, lowering-in, hydrotesting, tie-ins, and SIMOPS, while driving productivity, quality, and safety performance.<br>Primary Responsibilities, Authorities & Accountabilities:<br>Construction Execution & Site Supervision Plan, sequence, and supervise daily construction activities across all work fronts to meet project schedule targets. Act as the Construction Manager's primary site representative, ensuring instructions and priorities are executed by subcontractors and crews. Coordinate work-front resources (manpower, equipment, materials) to maintain progress and resolve site bottlenecks. Ensure construction activities are executed per approved IFC drawings, specifications, and method statements.<br>Saudi Aramco & Client Interface Liaise directly with Aramco site PMT, inspection, and QA/QC teams on construction progress and technical queries. Represent the Construction Manager in site coordination meetings, progress walks, and technical clarifications. Support timely resolution of client comments, NCRs, and field technical queries.<br>Quality, HSE & Permit Compliance Ensure all construction work is carried out under valid Permit to Work and in full compliance with HSE requirements. Enforce quality control checkpoints and hold points per the project Inspection & Test Plan (ITP). Support HSE and QC teams in inspections, audits, and closure of observations.<br>Planning, Progress & Reporting Monitor daily/weekly progress against the project schedule and flag deviations to the Construction Manager. Prepare daily construction reports, progress updates, and productivity data. Support look-ahead planning and resource forecasting with the Planning team.<br>Subcontractor & Workforce Management Supervise and direct subcontractor construction crews, ensuring productivity and workmanship standards. Review and endorse subcontractor method statements, JSAs, and work schedules. Mentor and provide technical guidance to junior site engineers and supervisors.<br>Technical & Engineering Support Review and interpret construction drawings and specifications; raise RFIs and technical queries as needed. Support constructability reviews and provide field level input on execution sequencing. Coordinate as built documentation and redline markups with the engineering team.<br>Interface & SIMOPS Coordination Coordinate construction interfaces with brownfield operations, other contractors, and simultaneous operations (SIMOPS). Support work front handover and tie-in coordination with operations and other disciplines. Materials & Equipment Coordination Coordinate timely availability of materials, plant, and equipment for construction work fronts. Monitor equipment utilization and support optimization of site resources. Flag material or equipment shortages early and coordinate corrective sourcing with procurement/logistics.<br>Deputizing & Escalation Act on behalf of the Construction Manager in their absence, representing the project in key site meetings and decisions. Escalate critical site issues, risks, and resource constraints to the Construction Manager in a timely manner. Support the Construction Manager in overall site construction strategy, sequencing, and execution planning. Champion a strong safety and quality culture across all work fronts under direct site oversight.<br>Role Specific Competencies:Bachelor's degree in Civil, Mechanical, or Construction Engineering PMP, NEC/FIDIC contract management, or equivalent certification preferred Minimum 10-12 years' construction experience, with significant exposure to oil & gas / pipeline projects Minimum 6 years’ experience in Saudi Arabia, preferably on Saudi Aramco pipeline/construction projects Saudi Aramco approval preferred Strong knowledge of pipeline construction methods (ROW, trenching, welding, lowering-in, hydrotesting, tie-ins) Strong knowledge of PTW systems and Saudi Aramco construction standards Proven leadership and site supervisory skills, able to deputize for senior site management Strong planning, scheduling, and progress reporting skills Proficiency in reading and interpreting construction drawings and technical specifications Effective communication and coordination

At Air Products, we reimagine what’s possible. By tapping into the motivation of our people and our collective experience, we create the ideas and innovations that drive us forward. When we come together – where every voice is heard and everyone knows they belong and matter – we create solutions that launch people into space, support lifesaving care in hospitals, and enable the construction of groundbreaking, world scale production facilities.<br><br>Reimagine What’s Possible <br><br>Purpose<br><br>The Senior Process Engineer – HYCO provides senior-level technical leadership for ongoing plant operations and projects—from concept development through commissioning and start-up—and leads asset management and productivity initiatives across all BHIG operating facilities in the Region. The role coordinates technical activities between site-based engineers and operations teams, mentors junior process engineers, and ensures safe, reliable, efficient and cost-effective production of hydrogen, syngas, CO and CO₂.<br><br>Nature & Scope<br><br>Reporting to the BHIG Engineering Manager, the Senior Process Engineer – HYCO provides day-to-day operational and technical support to Regional Sites through systematic monitoring of plant performance to ensure that production, energy efficiency, and reliability targets are consistently achieved in a safe manner. As a senior technical authority, the incumbent acts as a subject-matter expert (SME) on HYCO process technology and mentors site-based process engineers.<br><br>The role identifies productivity opportunities, develops engineering solutions, and supports the project execution teams across multiple technologies: Air Separation Units (ASU), Hydrogen / Syngas (HYCO – SMR based), and CO₂ production. The incumbent may also support Air Products plant support teams in providing similar services to JV partners, equipment sales customers and new prospects.<br><br>This position interfaces with Air Products global, regional and local process / production engineers, Regional Operations team members, project and design engineering teams, process safety specialists, and other technical support personnel. The role helps implement the systems and measures required to meet BHIG's Middle East operational requirements, technical standards, quality processes and plant & equipment integrity programs.<br><br>The incumbent will coordinate and effectively utilize global operating and technical resources to support existing operations, new installations and modifications led by BHIG Project Engineering or by the Air Products Global Engineering & Manufacturing Organization. The position will help drive consistency in operations across the Middle East Region and contribute to the continuous improvement of productivity, reliability, quality, process safety, and cost-effectiveness of the plants—using BHIG and Air Products systems, tools, statistical techniques and Continuous Improvement methodologies. Developing and tracking plant performance and reliability KPIs is an integral part of the role.<br><br>Principal Accountabilities<br><br>Safety<br><br>Provide and maintain a safe work environment for self and others; demonstrate visible safety leadership. Participate in meetings with government departments responsible for safety, environmental, fire protection and public security oversight, and ensure timely implementation of applicable requirements within BHIG. Participate in major turnarounds and project activities, ensuring safety throughout execution. Coordinate employee safety committee meetings and programs and actively encourage employee participation and accountability in safety management programs.<br><br>Technical<br><br>Act as senior technical authority and subject-matter expert for HYCO process engineering across the Region; mentor and coach junior and site-based process engineers, and provide peer review on key engineering deliverables. Lead and provide technical support to regional teams for new installations, existing plant modifications, on-going operations, and continuous improvement and maintenance activities for BHIG, equipment sales and potential new customers. Support is delivered through site visits, remote phone / video support, or via the Process Intelligence Center (PIC). Ensure all activities comply with legal requirements, BHIG safety and technical standards. Provide technical support and safety leadership for Management of Change (MOC), Operational/Process Hazard Reviews (OPHR), PHA / HAZOP, LOPA and other process safety related initiatives in order to drive PSM compliance. Consult BHIG and Air Products process safety specialists as required. Provide process engineering leadership to drive asset performance, reduce operating costs and increase plant throughput by supporting: troubleshooting, plant efficiency studies, process safety, equipment reliability, advanced process control (APC), asset management, and productivity project identification, development and execution. Apply process statistics and data analytics (control charts, regression, capability analysis, multivariate analysis) to detect performance drift, quantify variability, prioritize improvement opportunities and validate the impact of implemented changes. Develop, maintain and validate steady-state and dynamic process simulation models in Aspen Plus (and associated Aspen suite tools) to support troubleshooting, performance benchmarking, debottlenecking, what-if studies, energy optimization, and revamp / new project evaluations. Provide expert technical support on heterogeneous catalyst systems used in HYCO / Hydrogen plants—including Hydrodesulfurization (HDS), ZnO sulfur absorbers, Pre-Reforming, Steam Methane Reforming (SMR), High-Temperature Shift (HTS), Low-Temperature Shift (LTS) and Methanation—covering activity / deactivation assessment, kinetic and equilibrium evaluation, poison management, life-cycle prediction, change-out strategy, vendor selection and performance auditing. Facilitate operational excellence through continuous improvement in plant productivity, reliability, quality and cost; lead improvements and ensure that best practices are deployed. Provide technical leadership in investigations and Root Cause Analyses (RCA) in order to identify and implement sustainable corrective and preventive actions. Provide technical support for Advanced Process Control (APC) and real-time optimization (RTO) initiatives. Monitor plant production daily, driving asset performance and ensuring daily targets are met to maximize profitability and customer satisfaction.<br><br>Operations<br><br>Provide process engineering support to operations in order to safely and reliably operate, SMR-based HYCO and CO₂ facilities in the Region, meeting customer expectations on safety, reliability, product quality and supply flexibility while remaining compliant with contractual requirements. Ensure that BHIG standards and Air Products global best practices for EH&S, productivity, reliability, quality and customer service are met. Provide technical guidance to commissioning teams, supporting commissioning, start-up and troubleshooting activities. Participate in the training of the Operations team up to plant commissioning, including catalyst loading, reduction / activation and start-up of SMR, Shift and Methanation reactors. Participate in developing the month-end close model and ensure alignment with commercial obligations for the BHIG Middle East Commercial Area. Maintain close working relationships with engineering and maintenance personnel to continuously monitor and evaluate plant systems and equipment through a Plant Process Advisory model. Support Process Intelligence Center (PIC) initiatives such as plant monitoring, troubleshooting, plant simulation training sessions, plant modelling and plant efficiency monitoring. Maintain alignment with Plant Managers, Site Leadership and the Business Area on asset management opportunities and commercial priorities. Provide technical support for turnarounds, including catalyst inspection, sampling, change-out planning and post-turnaround performance validation.<br><br>Minimum Requirements And Qualifications<br><br>Education & Experience<br><br>Bachelor's Degree in Chemical Engineering (Master's degree is a plus). Minimum 12+ years of experience in Engineering and/or Operations in a senior technical role within the industrial gases, refining, petrochemical (Methanol and ammonia) or hydrogen production industry. Demonstrated experience and knowledge of the technology, design and operation of Steam Methane Reformers (HYCO) and CO₂ production systems is preferred. Single-technology expertise will be considered; multi-technology background is strongly preferred at this senior level. Proven track record of start-up, commissioning and plant operating experience. Demonstrated experience mentoring junior engineers and leading multi-disciplinary technical teams.<br><br>Technical Skills<br><br>Process Simulation – Strong proficiency in Aspen Plus) for steady-state and dynamic modelling of HYCO, ASU and CO₂ processes; capable of building, calibrating and using rigorous models for plant performance evaluation, troubleshooting and optimization. Process Statistics & Data Analytics – Working knowledge of statistical methods applied to process engineering: SPC / control charts, regression and correlation analysis, capability studies (Cp / Cpk), and multivariate / time-series analysis. Familiarity with tools such as Minitab, PI Datalink. Heterogeneous Catalysis – Solid technical understanding of heterogeneous catalysts used in hydrogen / syngas production, including Hydrodesulfurization (HDS / CoMo, NiMo), ZnO sulfur guards, Pre-reforming, Steam Methane Reforming (SMR), High-Temperature Shift (HTS – Fe/Cr), Low-Temperature Shift (LTS – Cu/Zn/Al) and Methanation (Ni based). This includes reaction kinetics and thermodynamics, activation / reduction procedures, deactivation and poisoning mechanisms, performance monitoring, life prediction and change-out strategy. Process Safety – Knowledgeable in Process Safety Management (PSM), PHA / HAZOP, LOPA, MOC, OPHR, and applicable local EHS regulations. Advanced Process Control & Optimization – Familiarity with APC, RTO and energy optimization concepts for hydrogen and ASU plants. Engineering Tools – Proficient in MS Office (Excel, Word, Power Point), data historians (e.g., OSIsoft PI / AVEVA PI), and standard process engineering calculation tools.<br><br>Leadership & Behavioral Competencies<br><br>Strong commitment to employee involvement, team building, diversity and inclusion. Proven ability to mentor and coach less experienced engineers and to act as a recognized technical reference within the organization. Able to communicate effectively across management, operations, maintenance and customer interfaces within and across regions. Proficiency in English (spoken and written) is required; Arabic language skills are a plus. Demonstrated leadership, organizational, computer and interpersonal skills. Personal commitment to continuous self-development and flexibility to work outside normal hours to meet operational and project commitments. Excellent influencing skills, ability to build trust and confidence with frontline workers, supervisors and management. Strong critical thinking, problem-solving and analytical skills are prerequisites. Confident, assertive, self-motivated and results oriented. Personal commitment to corporate values and to a culture of continuous improvement. Formal training and experience with Six Sigma (Green / Black Belt) and Continuous Improvement tools is a plus.<br><br>Founded in 1940, Air Products is a world-leading industrial gases company and has a proud history of innovation, operational excellence, with an unwavering commitment to safety and environmental stewardship. Working together, we are taking our passion and diverse backgrounds forward to reimagine what’s possible and generate a cleaner future for our customers, our communities, and the world.

Are you an experienced Projects Planner / Planning Engineer looking for your next career opportunity?<br>We are looking for a qualified and detail-oriented Projects Planner to join our Projects / Operations team. The role will be responsible for developing and managing project time plans to ensure projects are completed safely, on time, and within budget.<br>Key Responsibilities:Develop and define project goals, objectives, and detailed schedules. Plan, coordinate, and monitor project activities to ensure smooth execution. Prepare short- and long-term resource allocation plans. Monitor project progress, risks, milestones, and schedule performance. Identify changes in project scope and support planning adjustments. Prepare and present regular internal and external project reports. Gather actual project data, update schedules, and prepare reliable forecasts. Support Project Managers in Integrated Baseline Review and baseline schedule development. Coordinate client planning activities and respond to customer requirements. Prepare and manage risk assessments for assigned projects.<br>Requirements:Bachelor’s degree in a relevant field. Minimum 5 years of experience in project planning. Experience in Oil & Gas, Water/Wastewater, Electrical, or related project environments. Experience with key clients such as Aramco, SABIC, Marafiq, SWCC, or similar is preferred. Strong knowledge of planning software such as Primavera P6, MS Project, and Asta Powerproject. Strong reporting, communication, presentation, and coordination skills. Good understanding of engineering principles, budgeting, and project control. Ability to work under pressure, manage priorities, and work independently or as part of a team.

Job description:<br><br> ANDRITZ has an immediate opportunity for a skilled Instrumentation and Control Systems Engineer to support the design, specification, implementation, commissioning, and troubleshooting of industrial instrumentation and control systems. In this role, you will work collaboratively with multidisciplinary project teams to design and implement robust, reliable, and maintainable instrumentation and control systems for complex industrial applications. You will play a key role in instrumentation engineering, PLC/DCS programming and integration, supporting procurement and vendor activities, and providing commissioning and start-up support, while ensuring alignment with technical standards, safety requirements, and customer expectations. This position is ideal for an engineer who combines strong system-level expertise with hands-on experience and thrives in dynamic project environments. What You Will Be Doing Here’s an overview of your responsibilities and how you can leverage your expertise: Perform site assessments and evaluate existing instrumentation and control systems to define scope, risks, and technical approach Specify and select field instrumentation including flow, pressure, temperature, level, density, and analytical measurement devices. Develop control system designs, including system architecture, control philosophies, and functional specifications (PLC/DCS/SCADA) Design, configure, and support PLC, DCS, and HMI/SCADA systems, including control logic, interlocks, and alarm management strategies Prepare and maintain engineering deliverables such as instrument datasheets, material requisitions, control narratives, I/O lists, control system architecture diagrams, and functional design specifications Coordinate control system integration, including I/O assignments, communications, and interfaces with third-party systems Support procurement activities by reviewing vendor packages, technical submittals, and FAT documentation Collaborate with process, electrical, mechanical, and construction teams to ensure alignment between control strategies and system design Provide field support during construction, commissioning, and start-up, including instrument calibration, system checkout, loop verification, troubleshooting, and performance validation Develop and execute commissioning and acceptance documentation, including FAT/SAT procedures and system turnover documentation Ensure control systems are implemented and commissioned in accordance with project requirements, standards, and best practices Troubleshoot field instrumentation issues and recommend corrective actions. Adhere to company safety standards, including the ANDRITZ Life-Saving Rules, and promote a strong safety culture Demonstrate and reinforce #1ANDRITZway core values and behaviors in all aspects of work What We’re Looking For Bachelor’s degree in Instrumentation, Electrical, Automation, or Controls Engineering (or related discipline) Minimum of five (5) years’ experience in instrumentation and control systems engineering within industrial environments Strong experience with PLC, DCS, and/or SCADA systems, including configuration, programming, and system integration Experience specifying and developing instrumentation and control system deliverables such as data sheets, functional design specifications, control narratives, and I/O lists Proven experience supporting installation, commissioning and start-up of instrumentation and control systems. Solid understanding of industrial control system architecture, communications, and interfaces Experience with instrument calibration and troubleshooting Excellent interpersonal, verbal, and written communication skills Ability to work independently and collaboratively within project teams Willingness to travel domestically and internationally to support site activities Fluency in English is required; Arabic language skills are a strong asset Nice to Have Experience in mining, mineral processing, or other heavy industrial environments Hands-on experience with major control platforms (e.g., Yokogawa, Siemens, Rockwell/Allen-Bradley, ABB, Emerson, Honeywell) Experience participating in FAT/SAT and commissioning of instrumentation and control systems Understanding of industrial networks and communication protocols (e.g., OPC, Modbus, Ethernet/IP, Profibus) Knowledge of functional safety concepts (e.g., SIL / IEC 61511) Exposure to advanced control strategies or optimization systems is an asset

Cost Control Engineer – Saudi National Location: Dammam, Saudi Arabia Salary: Up to SAR 12,600 per month<br>The Opportunity Talent Hive is partnering exclusively with a well-established and diversified Saudi group as it continues a significant transformation and Saudization programme across its businesses.<br>As part of the continued strengthening of its PMO and cost-control capability, we are looking for an experienced Saudi Cost Control Engineer to join the organisation in Dammam.<br>This is an opportunity to join a large, operationally diverse business and play an important role in strengthening cost visibility, budgeting, forecasting and financial control across projects and operations.<br>Key Responsibilities As Cost Control Engineer, you will be responsible for supporting effective cost planning, monitoring and control, including:Monitor actual expenditure and commitments against approved budgets Support the preparation of budgets, forecasts and cost plans Track project and operational costs and identify variances, trends and potential overruns Perform detailed cost and variance analysis Prepare regular cost-control reports and management information Support forecasting and provide visibility of expected financial performance Maintain accurate cost information within relevant systems and reporting tools Work closely with PMO, Finance and operational stakeholders Support improvements to cost-control processes, reporting and governance<br>What We’re Looking For Saudi National Bachelor’s degree in Engineering, Finance, Quantity Surveying or Construction Management5+ years of experience in Cost Control, Cost Engineering, Project Cost Management or a closely related area Proven hands-on experience in budgeting, cost tracking and variance analysis Strong knowledge of cost-control systems, tools and reporting methodologies Strong analytical capability with the ability to interpret cost data and identify performance issues Experience within a PMO or multi-project environment would be advantageous Professional certifications such as CCP, PMP or a similar cost-management qualification are preferred but not essential<br>Why Consider This Opportunity? You’ll be joining a major Saudi organisation with diverse operations at an important stage of its transformation and continued investment in Saudi professional talent. The role provides exposure to a complex operating environment and the opportunity to contribute directly to stronger cost-control, planning and performance-management practices, while developing your career within an evolving PMO function.<br>Salary: Up to SAR 12,600 per month Location: Dammam, Saudi Arabia<br>If you are a Saudi Cost Control professional with strong hands-on experience across budgeting, forecasting, cost tracking and variance analysis, we would be interested in hearing from you. Apply with your CV for consideration.<br>Applications are open to Saudi Nationals in line with the requirements of the programme.

<h3 >About TestCrew and the Role</h3> <p >TestCrew | Quality Engineering &amp; Software Testing is seeking a <strong >Site Reliability Engineer (SRE)</strong> for an upcoming enterprise engagement in Al-Ahsa, located in the Eastern region. This full-time position is open to candidates with 2-5 years of relevant experience, focusing on ensuring the stability and performance of critical IT systems.</p> <h3 >Role Overview</h3> <p >The Site Reliability Engineer will undertake a hands-on operational role, responsible for the availability, reliability, performance, and security of critical IT systems. This involves proactive monitoring, automation, and disciplined incident response. The successful candidate will collaborate closely with development, operations, and security teams to maintain highly available services, streamline operations through automation, and drive continuous service improvement.</p> <h3 >Key Responsibilities</h3> <ul > <li >Monitor and manage enterprise infrastructure, applications, and services to ensure high availability, stability, and optimal performance.</li> <li >Operate and maintain monitoring and observability platforms to detect incidents, analyze trends, and respond proactively to system issues.</li> <li >Design and implement monitoring strategies, dashboards, alerts, and performance metrics to improve operational visibility.</li> <li >Perform root cause analysis (RCA) for incidents and implement preventive measures to reduce recurring issues.</li> <li >Automate operational tasks, deployments, and maintenance activities using scripting and infrastructure automation tools.</li> <li >Manage CI/CD pipelines and support release management processes to enable reliable and efficient software deployments.</li> <li >Optimize system performance while ensuring compliance with service level agreements (SLAs), operational standards, and best practices.</li> <li >Support business continuity, disaster recovery, and operational resilience initiatives.</li> <li >Implement security best practices, including system hardening, patch management, and secure operational procedures.</li> <li >Collaborate with development, infrastructure, security, and IT operations teams to resolve complex technical issues.</li> <li >Maintain operational documentation, runbooks, knowledge articles, and incident reports.</li> <li >Participate in major incident management, post-incident reviews, and continuous improvement initiatives.</li> </ul> <h3 >Candidate Profile and Requirements</h3> <ul > <li >2-5 years of experience in a Site Reliability Engineering or a similar operational role.</li> <li >Strong ownership mindset with a proactive, reliability-first approach.</li> <li >Excellent analytical and problem-solving skills.</li> <li >Ability to remain calm and methodical during critical incidents.</li> <li >Strong communication and collaboration skills.</li> <li >Ability to work effectively in a fast-paced enterprise environment.</li> </ul> <h3 >Work Environment and Conditions</h3> <p >This role requires candidates to work onsite at the client location in Al-Ahsa. Participation in on-call support and shift rotations is also a requirement for this position.</p> <h3 >Application Information</h3> <p >This full-time position offers an opportunity to contribute to critical system reliability within an enterprise environment. Salary details will be discussed during the interview process.</p>

<p>BE /Diploma -Electrical/ Electronics/ Computer Engineering with min.6/8 years’ Automation experience. He should have hands on working knowledge in Configuration, Testing & Commissioning of Substation Automation and SCADA Systems with COPODATA Software.</p><br><p>He should able to perform below works on Zenon Software,</p><ol><li><p>Building of New station data from Scratch i.e Servers,</p></li><li><p>Workstation and Gateways configuration.</p></li><li><p>Integration of RTU’s / IED’s into Servers & Gateways</p></li><li><p>Conduction FAT & SAT of Realtime systems.</p></li><li><p>Knowledge on IEC 61850 and IEC 60870-5-101/104</p></li><li><p>Protocols</p></li><li><p>Minimum 2 to 3 years on site Testing & Commissioning</p></li><li><p>experience</p></li><li><p>Trouble shooting Skills</p></li></ol><p><strong>Desired Candidate Profile</strong></p><br><ul><li><p>Proven experience with COPODATA or similar data integration and management platforms.</p></li><li><p>Strong proficiency in programming languages such as Java, Python, or C#.</p></li></ul>

<p>Experience, in depth knowledge of Testing & Commissioning of HITACHI (ABB) Substation Automation Systems.</p><ul><li><p><strong>He should have a knowledge in,</strong></p><ol><li><p>Configuration of Micro SCADA ABB SAS 600 Series, ABB RTU 560</p></li><li><p>Configuration of ABB IED’S ( REx 670, REB 500, REF-</p></li><li><p>541/543/545)</p></li><li><p>Integration of ABB BCU’s and Numerical Protection Relays</p></li><li><p>Integration of 3rd party Protection Relays.</p></li><li><p>Configuration of SAS Servers, Clients, Switches and Gateways</p></li><li><p>Substation Single Line Diagrams & Electrical Drawings</p></li><li><p>Conducting FAT & SAT of SAS system</p></li></ol></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor's degree in Electrical Engineering, Computer Engineering, or a related field.</li><li>Minimum of 5 years of experience in substation automation systems engineering.</li><li>Proven expertise with Hitachi/ABB SAS products (e.g., MicroSCADA, Relion protection relays).</li><li>Strong understanding of power system protection principles and substation operations.</li></ul>

<ol><li><p>SIEMENS SUBSTATION AUTOMATION SYSTEM HMI</p></li><li><p>Servers & Clients Config –SICAM PAS / SICAM SCC (SCMS) .</p></li><li><p>Integration of SIEMENS BCU’s (6MD 664, 6MD63 and</p></li><li><p>Numerical Protection Relays.</p></li><li><p>Integration of 3rd party Protection Relays.</p></li><li><p>Configuration of SAS Servers, Clients, Switches and Gateways</p></li><li><p>Substation Single Line Diagrams & Electrical Drawings</p></li><li><p>Conducting FAT & SAT of SAS system</p></li><li><p>Knowledge on IEC 61850, IEC 60870-5-101/104 and DNP 3.0</p></li><li><p>Protocols</p></li><li><p>Troubleshooting Skills</p></li></ol><p><strong>Desired Candidate Profile</strong></p><p>BE /Diploma -Electrical/ Electronic Engineering with min. 6/8 years experience, in depth knowledge of Testing & Commissioning of SIEMENS Substation Automation Systems. </p>

Job Summary A Junior Electrical Design Engineer assists in the design, development, and documentation of electrical systems for industrial, commercial, or infrastructure projects. The role involves preparing engineering drawings, calculations, technical specifications, and supporting project execution while ensuring compliance with applicable standards and client requirements.<br>Key Responsibilities Assist in the design of electrical power, lighting, grounding, and control systems. Prepare electrical drawings, layouts, single-line diagrams (SLDs), and schematics. Perform basic electrical calculations, including:Load calculations Cable sizing Voltage drop calculations Short-circuit calculations Develop equipment and material specifications. Support preparation of cable schedules, panel schedules, and bill of materials (BOM). Review and interpret engineering documents, drawings, and project specifications. Coordinate with other engineering disciplines such as mechanical, instrumentation, civil, and process engineering. Ensure designs comply with relevant standards such as IEC, IEEE, NEC, and local regulations. Assist in technical reviews, design verification, and site support activities. Participate in project meetings and provide engineering support throughout project execution.<br>Required Skills Basic understanding of electrical engineering principles. Knowledge of power distribution systems and electrical protection concepts. Ability to read and interpret electrical drawings and technical documents. Proficiency in Auto CAD and Microsoft Office applications. Familiarity with ETAP, Dialux, EPLAN, or similar engineering software is an advantage. Strong analytical and problem-solving skills. Good communication and teamwork abilities. Attention to detail and commitment to quality.<br>Qualifications Bachelor's Degree in Electrical Engineering.0-3 years of experience in electrical design engineering. Fresh graduates are encouraged to apply.<br>Preferred Knowledge Electrical power systems. LV/MV distribution systems. Motor control centers (MCCs). Switchgear and transformers. Lighting and grounding systems. Industrial control systems and PLC fundamentals.

Company Description Binnowiran For Trading & Cont. Co. is a regional contracting and trading company that supports industrial operations and specialized projects in the energy and marine sectors. The company focuses on delivering reliable services and logistical solutions that meet strict safety, environmental, and operational standards. Working closely with clients, Binnowiran provides tailored support for complex field operations, including emergency response and technical services. Team members can expect a structured work environment, opportunities to contribute to critical field activities, and exposure to oil and gas operational practices. Role Description The Logistic Engineer – Oil Spill Combat is a full-time, on-site role based in Khafji, responsible for planning, coordinating, and optimizing logistics activities that support oil spill response operations. The role involves designing and implementing logistics plans for equipment deployment, transportation routes, and resource allocation during drills and live incidents. Daily tasks include monitoring inventory of combat and safety equipment, coordinating procurement and delivery schedules, and ensuring readiness of vehicles, vessels, and materials. The Logistic Engineer will collaborate with operations teams, field supervisors, and suppliers to maintain efficient supply chains, prepare operational reports, and support adherence to environmental and safety procedures. The role also includes participating in emergency response exercises, maintaining documentation, and continuously improving logistics processes to enhance response speed and reliability. Key Responsibilities Process & Service Enhancement: Provide technical support and conduct comprehensive studies, research, and activities in Marine Logistics and Oil Spill combating. Vessel & Equipment Optimization: Perform engineering studies to ensure the effective and proper utilization of boats and equipment, fully meeting all company vessel logistics requirements. Research & Development: Evaluate technical specifications and designs of state-of-the-art oil spill equipment to keep the company at the forefront of industry standards. Procurement & Recommendations: Develop robust, well-researched recommendations for purchasing new equipment tailored to company operations. Qualifications Education: Bachelor’s degree in Marine Engineering, Pollution Engineering, or Environmental Studies. Experience: Minimum 4 years of hands-on experience in Oil Spill Containment & Recovery. Communication: Excellent command of English (written and verbal) to draft and comprehend complex technical documentation.

Company Description Asrar Architecture & Engineering Consultants Group is a forward-thinking consultancy dedicated to delivering innovative, sustainable, and high-quality design and supervision services. The firm provides comprehensive architectural and engineering solutions that address the evolving needs of the construction and infrastructure sectors. With a strong emphasis on client satisfaction, technical rigor, and timely project delivery, Asrar focuses on creating long-term value in every engagement. Its multidisciplinary team of experienced professionals combines creativity, precision, and a deep understanding of industry standards and best practices to deliver reliable outcomes.<br>Role Description The Senior Mechanical Design Engineer is a full-time, on-site role based in Al Khobar, responsible for leading mechanical design activities for building and infrastructure projects. Day-to-day responsibilities include developing mechanical systems designs, preparing detailed engineering drawings and specifications, and reviewing designs for compliance with codes, standards, and project requirements. The role involves coordinating with architectural, structural, and MEP teams, performing design calculations, and validating system performance through simulations or analytical methods. The Senior Mechanical Design Engineer will also support project planning, oversee junior engineers and designers, participate in client meetings, and provide technical guidance throughout design and construction phases.<br>Qualifications<br> Strong mechanical engineering foundation, including Mechanical Engineering and Design Engineering skills. Expertise in Machine Design and Product Design for building services and related mechanical systems. Proficiency in Computer-Aided Design (CAD) tools for 2D and 3D modeling, detailing, and documentation. Experience leading mechanical design projects, including coordination with multidisciplinary teams and stakeholders. Solid understanding of relevant codes, standards, and best practices in building services and infrastructure projects. Bachelor’s degree or higher in Mechanical Engineering or a closely related discipline. Several years of experience in mechanical design engineering, preferably within architectural or engineering consultancy environments. Strong analytical, problem-solving, and documentation skills, with attention to accuracy and safety. Effective communication skills and the ability to mentor and guide junior team members.