وظائف مراقب كهرباء - تبوك السعودية

Egis is a leading global architectural, consulting, construction engineering, operations and mobility services firm. We create and operate intelligent infrastructure and buildings that both respond to the climate emergency and contribute to balanced, sustainable and resilient development. Our 20,500 employees operate across over 100 countries, deploying their expertise to develop and deliver cutting-edge innovations and solutions for clients. Through the wide range of our activities, we are central to the collective organization of society and the living environment of citizens all over the world.<br><br><br><br>Job Description<br><br>The Senior Electrical Engineer is responsible for providing oversight, coordination and construction supervision support for electrical works across AlUla infrastructure and development projects. The role ensures that electrical works are executed in accordance with approved designs, specifications, applicable Saudi regulations, authority requirements, international standards, project quality requirements, and approved construction programmes.<br><br>The position will work closely with the Resident Engineer, Project Manager, contractors, supervision consultants, designers, utility providers (SEC), authorities and other engineering disciplines to facilitate the successful delivery, testing, commissioning, and handover of electrical infrastructure.<br><br> <br><br>Key Roles & Responsibilities<br><br>Provide senior technical oversight of electrical works during the construction, testing, commissioning and handover stages. Sanity checks electrical drawings, specifications, method statements, material submissions, shop drawings, and technical proposals for compliance with project requirements. Monitor installation of electrical infrastructure including HV/MV/LV networks, substations, transformers, switchgear, distribution systems etc. Coordinate electrical works with civil, utilities, roads, architectural, mechanical, ICT and other project disciplines. Monitor site activities to ensure compliance with approved IFC drawings, specifications, approved materials, and relevant standards. Coordinate interfaces with Saudi Electricity Company (SEC) and other relevant utility providers and authorities as required. Support the Project Manager/Resident Engineer in facilitating technical and authority approvals necessary for construction. Monitor contractor progress against the approved programme and identify electrical activities that may affect project milestones or critical interfaces. Monitor testing and commissioning activities and verify that required inspections, tests and documentation are completed before handover. Review electrical snagging/punch-list items and monitor their closure. Support review of as-built drawings, O&M manuals, testing and commissioning records and final handover documentation. Maintain professional communication with the Client, contractors, consultants and relevant stakeholders. Perform other electrical engineering duties required for successful delivery of the assigned AlUla projects. <br><br><br>Qualifications<br><br>Bachelor’s degree in electrical engineering from a recognized university. Minimum 10 years of relevant professional experience, preferably involving major infrastructure, utilities, and development projects. Strong experience in electrical infrastructure including HV/MV/LV distribution, substations, transformers, street lighting, external networks and associated systems. Demonstrable experience working within PMC, PMCM, engineering consultancy or construction supervision environments. Previous experience on major infrastructure or multidisciplinary development programmes is highly desirable. Previous experience in Saudi Arabia and/or the GCC is required. Good knowledge of SEC requirements, Saudi Building Code and applicable Saudi authority requirements. Good knowledge of relevant international standards including IEC, IEEE, NFPA and BS standards, as applicable. Experience with testing, commissioning, and handover of electrical systems. Professional engineering registration or membership of a recognized engineering institution is preferred. Registration with the Saudi Council of Engineers (SCE), where applicable, is preferred.

<h3 >About the Role</h3> <p >SEVEN is seeking a highly skilled and experienced <strong >Senior Technician - Maintenance</strong> to join our team on a full-time basis. This critical role involves performing a variety of advanced-level planned maintenance, repair activities, and troubleshooting for attraction rides and devices across our projects in Riyadh, Tabuk, Abha, Yanbu, and Medina. The Senior Technician will lead work execution alongside other attraction technicians, actively supporting onsite installations, collaborating with contractors and manufacturers to ensure SEVEN’s maintenance requirements and operational readiness are met.</p> <h3 >Key Responsibilities</h3> <ul > <li >Lead and execute technical activities for rides and attractions, supported by the technician team and technical management.</li> <li >Perform advanced planned maintenance, repair, and troubleshooting for attraction rides and devices of all typologies.</li> <li >Actively participate with Operations, Project Attraction Teams, and Project Management Consultants.</li> <li >Maintain close communication with ride manufacturers' representatives engaged at SEVEN project sites.</li> <li >Act as Team Leader when required during absences, verifying the quality and accuracy of technicians' work, particularly on safety-critical inspections and repairs.</li> </ul> <h3 >Maintenance Operations and Compliance</h3> <ul > <li >Execute and record corrective maintenance activities on rides and attractions in accordance with industry standards and manufacturer requirements.</li> <li >Execute and record planned preventive maintenance activities according to approved schedules.</li> <li >Respond to ride and attraction breakdowns, diagnose faults, and restore operations safely and efficiently.</li> <li >Lead and execute major annual maintenance and rehabilitation activities to ensure optimal ride performance.</li> <li >Support daily ride operational readiness and achievement of reliability and availability targets.</li> <li >Work in accordance with international safety best practices and KSA regulatory requirements, adhering to all QHSE policies, procedures, and company standards.</li> </ul> <h3 >Technical Support and Development</h3> <ul > <li >Contribute to the continuous improvement of technical documentation, including SOPs, technical manuals, troubleshooting guides, and PM checklists.</li> <li >Support the implementation and effective use of asset management systems and related documentation.</li> <li >Monitor spare parts and consumable stock requirements, providing proactive feedback to support availability.</li> <li >Conduct inspections of tools and equipment, ensuring compliance with calibration and safety requirements.</li> <li >Deliver training and maintain training records in line with Learning &amp; Development requirements.</li> <li >Identify opportunities to improve ride performance, maintenance efficiency, and operational effectiveness.</li> </ul> <h3 >Qualifications and Experience</h3> <ul > <li >An Engineering Certificate or Diploma in a relevant technical field (Electrical, Mechanical, or Electromechanical).</li> <li >A minimum of <strong >5 years of experience</strong> in the leisure, attractions, or theme park industry, with a preference for candidates possessing 5-10 years of experience.</li> <li >Demonstrated hands-on experience in major ride and attraction maintenance activities, including annual rehabilitation (REHAB).</li> </ul> <h3 >Work Environment and Company Values</h3> <p >The Senior Technician will contribute to achieving departmental objectives and KPIs aligned with SEVEN’s strategic goals. This role requires effective communication with Operations teams to resolve technical issues and a commitment to promoting guest experience excellence while maintaining the highest safety standards. You will be expected to support SEVEN’s vision, mission, and values, and adhere to the SEVEN Code of Conduct, upholding the highest standards of integrity.</p>

At Air Products, we reimagine what’s possible. By tapping into the motivation of our people and our collective experience, we create the ideas and innovations that drive us forward. When we come together – where every voice is heard and everyone knows they belong and matter – we create solutions that launch people into space, support lifesaving care in hospitals, and enable the construction of groundbreaking, world scale production facilities.<br><br>Reimagine What’s Possible <br><br>Job Title: EPMS Engineer<br><br>Job Purpose<br><br>The EPMS Engineer is responsible for driving the resolution and closeout of all outstanding EPMS-related technical, functional, integration, testing, and commissioning issues. The role involves coordinating with engineering contractors, vendors, commissioning teams, operations personnel, and project stakeholders to ensure the EPMS is fully functional, compliant with project requirements, and ready for final handover.<br><br>Key Responsibilities<br><br>Issue Management and Closeout<br><br>Review, prioritize, and manage all EPMS punch list items and outstanding actions. Maintain a comprehensive EPMS issue tracker with owners, target dates, and status updates. Investigate technical issues, determine root causes, and coordinate corrective actions. Verify that all identified issues are resolved and formally closed.<br><br>Technical Support<br><br>Provide technical expertise on EPMS architecture, hardware, software, networking, and system integration. Review configuration settings, alarms, events, reports, dashboards, and monitoring functions. Support troubleshooting of communication issues between EPMS, SCADA, DCS, PLCs, protection relays, meters, and other integrated systems. Validate system performance against project specifications and operational requirements.<br><br>Testing and Verification<br><br>Develop and execute test procedures for issue verification and closeout. Witness and document retesting activities following corrective actions. Ensure all functional, integration, and reliability tests are successfully completed. Support SAT, commissioning, and performance testing activities.<br><br>Vendor and Contractor Coordination<br><br>Interface with EPMS suppliers, system integrators, OEMs, and EPC contractors. Monitor vendor action items and ensure timely resolution of defects. Review and approve technical submissions, software revisions, and configuration changes. Facilitate technical meetings to drive issue resolution.<br><br>Documentation and Handover<br><br>Ensure all as-built documentation is complete and accurate. Review operating procedures, maintenance manuals, and user guides. Verify closure of all comments from FAT, SAT, commissioning, and operational readiness reviews. Support final handover to operations and maintenance teams.<br><br>Reporting<br><br>Provide regular status reports on outstanding issues, risks, and mitigation plans. Highlight critical path items affecting project completion. Escalate unresolved technical issues to project management when required.<br><br>Qualifications<br><br>Education<br><br>Bachelor's Degree in Electrical Engineering, Power Systems Engineering, or a related discipline.<br><br>Experience<br><br>5–10+ years of experience in electrical power systems, SCADA, EMS, or EPMS projects. Experience with commissioning and troubleshooting electrical monitoring and control systems. Proven track record in managing punch lists and closeout activities during project execution.<br><br>Technical Skills<br><br>Knowledge of power system monitoring, protection, and control systems. Familiarity with communication protocols such as Modbus, IEC 61850, DNP3, OPC, and Ethernet networks. Experience with electrical substations, switchgear, protection relays, energy meters, and power management systems. Understanding of FAT, SAT, commissioning, and handover processes. Ability to analyze system logs, alarms, events, and performance data.<br><br>Soft Skills<br><br>Strong problem-solving and troubleshooting abilities. Excellent coordination and stakeholder management skills. Strong written and verbal communication. Ability to manage multiple issues and priorities in a fast-paced project environment.<br><br>Founded in 1940, Air Products is a world-leading industrial gases company and has a proud history of innovation, operational excellence, with an unwavering commitment to safety and environmental stewardship. Working together, we are taking our passion and diverse backgrounds forward to reimagine what’s possible and generate a cleaner future for our customers, our communities, and the world.

About the Role We are seeking a skilled Low Current / ELV Technician to perform installation, testing, preventive maintenance, troubleshooting, and corrective maintenance activities for Extra-Low Voltage (ELV) and low-current systems within building facilities and Operations & Maintenance environments. The role requires practical hands-on experience with building ELV systems, including CCTV, Access Control, Fire Alarm, Structured Cabling, Intercom, Public Address (PA/BGM), SMATV/IPTV, and related low-current infrastructure. The technician will be responsible for ensuring ELV systems remain operational, reliable, and compliant with site requirements and safety procedures.<br>Key Responsibilities Install, maintain, troubleshoot, and repair low-current / ELV systems within buildings and facilities. Perform installation and maintenance of CCTV cameras, recording systems, monitors, and related equipment. Install, test, and troubleshoot Access Control systems, including card readers, controllers, magnetic locks, exit buttons, and associated devices. Perform basic installation, testing, and maintenance of Fire Alarm system devices, including detectors, manual call points, sounders, modules, and field wiring. Install and maintain structured cabling systems, including data/voice cables, patch panels, cabinets, outlets, and cable management. Perform installation and maintenance of Public Address (PA), Background Music (BGM), Intercom, SMATV/IPTV, and similar ELV systems. Trace and troubleshoot cable faults, connectivity issues, device failures, and system alarms. Terminate and test cables using appropriate tools and testing equipment. Read and interpret basic ELV drawings, layouts, schematics, cable schedules, and wiring diagrams. Conduct preventive maintenance inspections and identify potential system failures before they affect operations. Perform corrective maintenance and replace defective devices, components, cables, and accessories as required. Verify system functionality after installation, repair, or maintenance activities. Maintain proper labeling, routing, termination, and organization of ELV cables and equipment. Coordinate with supervisors, engineers, and other maintenance teams when troubleshooting system-related issues. Record completed maintenance activities, identified faults, spare parts used, and required follow-up actions. Follow site safety procedures, permit requirements, PPE requirements, and manufacturer recommendations. Maintain tools, testing equipment, and work areas in safe and good working condition. Respond to assigned maintenance requests and emergency faults within the required response time. Perform other ELV-related technical duties as assigned by the supervisor.<br>Required Technical Skills Practical hands-on experience with ELV / Low Current systems. Knowledge of one or more of the following systems:CCTVAccess Control Fire Alarm Structured Cabling / Data Networks Public Address / BGMIntercom SMATV / IPTVGate Barrier / Parking Systems Other building ELV systems Ability to identify and troubleshoot basic electrical and ELV faults. Ability to perform cable pulling, termination, labeling, testing, and fault tracing. Ability to use basic ELV testing equipment and hand tools. Ability to read basic ELV drawings, schematics, and wiring diagrams. Basic understanding of IP addressing, network connectivity, and Ethernet cabling is an advantage. Knowledge of preventive and corrective maintenance practices. Good understanding of technical safety procedures and PPE requirements.<br>Qualifications & Experience Technical diploma, certificate, or recognized vocational qualification in Electrical, Electronics, Telecommunications, ELV, Low Current Systems, or a related technical discipline. Relevant experience in building facilities, Operations & Maintenance, Facility Management, construction, or ELV projects. Candidates should meet one of the following experience/qualification combinations:Minimum 2 years of relevant experience with a three-year technical diploma. Minimum 4 years of relevant experience with a two-year technical certificate. Minimum 6 years of relevant experience with a one-year apprenticeship or vocational certificate. Experience working on commercial buildings, residential compounds, hospitals, hotels, malls, airports, or large facilities is an advantage. Basic English communication skills. Ability to follow technical instructions and work effectively under supervision. Willingness to complete a technical / ELV trade test.<br>Personal Competencies Strong troubleshooting and fault-finding ability. Practical, hands-on approach to technical work. Good attention to detail. Ability to work independently and as part of a technical team. Good communication and coordination skills. Ability to prioritize maintenance requests and respond to urgent faults. Commitment to safety, quality, and site procedures. Punctual, disciplined, and reliable.<br>Work Environment The position is based within building facilities and Operations & Maintenance environments and may require working in plant rooms, electrical/ELV rooms, ceilings, risers, equipment rooms, and other technical areas. The technician may be required to work shifts, respond to emergency maintenance requests, and perform tasks in accordance with site operational requirements. Trade Test Shortlisted candidates may be required to complete a practical ELV technical assessment covering areas such as:CCTV troubleshooting Access Control troubleshooting Fire Alarm basic troubleshooting Cable termination and testing Fault tracing Reading basic ELV drawings Use of ELV tools and testing equipment Basic IP/network connectivity<br>Equal Opportunity Statement We are committed to maintaining an inclusive and professional workplace and providing equal opportunities to qualified candidates.

NEOM Green Hydrogen Company Limited (NGHC):NEOM Green Hydrogen Company (NGHC) is on a mission to make a carbon-free, climate-safe future a reality. We are building the world’s largest plant to produce green ammonia at scale, providing humankind with a cost-efficient solution that will accelerate the worldwide green hydrogen economy. Located in NEOM and supporting Saudi Arabia’s Vision 2030, NGHC will be integrating up to 4GW of onshore solar and wind energy to supply up to 650 tons of green ammonia per day for transportation globally. Operations will go onstream in 2026. NGHC brings together the technology, operational efficiency and know-how of ACWA Power, Air Products and NEOM in a joint-venture partnership with over 80 years of combined experience in the fields of hydrogen, energy, renewables and global networks.<br>JOB DETAILS:Division: NGHC Operations. REPORTS TO: NGHC Instrument Supervisor. LIAISE/COOPERATE WITH: Air Products, External EPCs, Suppliers, NGHC Operation Directors, Operations and Maintenance Staff.<br>POSITION SUMMARY:This position will be part of NGHC (Neom Green Hydrogen Company) Maintenance group. Will be based in Neom Region. Plan and schedule maintenance activities, coordinating with operations, maintenance, engineering, and procurement teams to ensure timely execution. Timely and accurately reporting Maintenance KPIs. Allocate sufficient resources, including labour, materials, and tools, to maximize maintenance efficiency and manpower utilization.<br>NATURE & SCOPE:The main functions of this position are:Planning and Scheduling all Instrument Maintenance Jobs Support in preparation and reporting of maintenance KPIs. Effectively reporting of schedule Compliance, KPI parameters etc. Report status of external jobs. Single point of contact for contractors for external jobs. Comply with NGHC Safety Standards. Comply with NGHC contractors’ management system. Manpower optimization and utilization. Lead daily Operation and Maintenance coordination meeting. Lead contractors Kick-Off meetings. Interface with NGHC-MM and list out priorities, provide clear visibility on Hold for material orders. Support on-call emergencies. Ensure inventory control and balance for all instrument spare parts.<br>PRINCIPAL DUTIES AND RESPONSBILITIES:Develop detailed maintenance schedules using software like SAP S/4Hana, MS Project, or other planning tools. Domain expertise in SAP PM/maintenance modules; strong command of relevant SAP transactions and configuration. Define work breakdown structures (WBS) and sequence activities efficiently. Establish and maintain baseline schedules. Identify and allocate manpower, equipment, tooling, spares and materials as per project needs. Ensure optimal utilization of instrument resources to enhance productivity. On-call support during plant emergencies, to plan any emergency maintenance activity. Track and monitor the progress of electrical works against the schedule. Generate weekly and monthly progress reports for NGHC management. Identify delays, analyze root causes, and recommend corrective actions. Ensure smooth coordination between different electrical activities and other disciplines. Identify potential project risks (delays, resource shortages, design changes) and develop mitigation strategies. Revise schedules as needed to accommodate unforeseen changes. Monitor subcontractor performance to ensure adherence to Job timelines aligned with predetermined schedule. Support in TA/SD job package preparation. Act as Point of contact for external contractors. Ability to act as SAP power user and Master Data specialist will be added advantage. To prepare report based on KPIS.<br>PEOPLE MANAGEMENT:Act as single point of contact with contractors and external service providers.<br>SKILLS / TECHNICAL KNOWLEDGE AREAS:Demonstrated safe work skills Experience: 7–10 years in Routine maintenance planning, Scheduling within petrochemical, or fertilizer and oil & gas. Ability to work collaboratively with various disciplines, Engineers, Plant managers to effectively schedule the activities. Ability to work independently and complete tasks as scheduled is required Experience of mentoring / coaching less experienced, Planners and Electrical technicians Proficiency in Primavera P6, MS Project, SAP S4Hana, and ERP systems Strong understanding of Instrument systems, control valves, analysers, Transmitters, vibration sensors, RTD, gauge, switches, flowmeters, electro-pneumatic positions for control valves, actuators, conductive limit detectors, etc. Excellent analytical, problem-solving, and time-management skills. Strong communication and teamwork abilities. Negotiation skills. Single point for contact with external contactors.<br>QUALIFICATIONS REQUIRED:B. S. in Instrument Engineering or equivalent. MINIMUM YEARS EXPERIENCE IN SIMILAR JOB ROLE:7 - 12 years of relevant experience.

About the Role We are seeking a skilled Low Current / ELV Technician to perform installation, testing, preventive maintenance, troubleshooting, and corrective maintenance activities for Extra-Low Voltage (ELV) and low-current systems within building facilities and Operations & Maintenance environments. The role requires practical hands-on experience with building ELV systems, including CCTV, Access Control, Fire Alarm, Structured Cabling, Intercom, Public Address (PA/BGM), SMATV/IPTV, and related low-current infrastructure. The technician will be responsible for ensuring ELV systems remain operational, reliable, and compliant with site requirements and safety procedures.<br>Key Responsibilities Install, maintain, troubleshoot, and repair low-current / ELV systems within buildings and facilities. Perform installation and maintenance of CCTV cameras, recording systems, monitors, and related equipment. Install, test, and troubleshoot Access Control systems, including card readers, controllers, magnetic locks, exit buttons, and associated devices. Perform basic installation, testing, and maintenance of Fire Alarm system devices, including detectors, manual call points, sounders, modules, and field wiring. Install and maintain structured cabling systems, including data/voice cables, patch panels, cabinets, outlets, and cable management. Perform installation and maintenance of Public Address (PA), Background Music (BGM), Intercom, SMATV/IPTV, and similar ELV systems. Trace and troubleshoot cable faults, connectivity issues, device failures, and system alarms. Terminate and test cables using appropriate tools and testing equipment. Read and interpret basic ELV drawings, layouts, schematics, cable schedules, and wiring diagrams. Conduct preventive maintenance inspections and identify potential system failures before they affect operations. Perform corrective maintenance and replace defective devices, components, cables, and accessories as required. Verify system functionality after installation, repair, or maintenance activities. Maintain proper labeling, routing, termination, and organization of ELV cables and equipment. Coordinate with supervisors, engineers, and other maintenance teams when troubleshooting system-related issues. Record completed maintenance activities, identified faults, spare parts used, and required follow-up actions. Follow site safety procedures, permit requirements, PPE requirements, and manufacturer recommendations. Maintain tools, testing equipment, and work areas in safe and good working condition. Respond to assigned maintenance requests and emergency faults within the required response time. Perform other ELV-related technical duties as assigned by the supervisor.<br>Required Technical Skills Practical hands-on experience with ELV / Low Current systems. Knowledge of one or more of the following systems:CCTVAccess Control Fire Alarm Structured Cabling / Data Networks Public Address / BGMIntercom SMATV / IPTVGate Barrier / Parking Systems Other building ELV systems Ability to identify and troubleshoot basic electrical and ELV faults. Ability to perform cable pulling, termination, labeling, testing, and fault tracing. Ability to use basic ELV testing equipment and hand tools. Ability to read basic ELV drawings, schematics, and wiring diagrams. Basic understanding of IP addressing, network connectivity, and Ethernet cabling is an advantage. Knowledge of preventive and corrective maintenance practices. Good understanding of technical safety procedures and PPE requirements.<br>Qualifications & Experience Technical diploma, certificate, or recognized vocational qualification in Electrical, Electronics, Telecommunications, ELV, Low Current Systems, or a related technical discipline. Relevant experience in building facilities, Operations & Maintenance, Facility Management, construction, or ELV projects. Candidates should meet one of the following experience/qualification combinations:Minimum 2 years of relevant experience with a three-year technical diploma. Minimum 4 years of relevant experience with a two-year technical certificate. Minimum 6 years of relevant experience with a one-year apprenticeship or vocational certificate. Experience working on commercial buildings, residential compounds, hospitals, hotels, malls, airports, or large facilities is an advantage. Basic English communication skills. Ability to follow technical instructions and work effectively under supervision. Willingness to complete a technical / ELV trade test.<br>Personal Competencies Strong troubleshooting and fault-finding ability. Practical, hands-on approach to technical work. Good attention to detail. Ability to work independently and as part of a technical team. Good communication and coordination skills. Ability to prioritize maintenance requests and respond to urgent faults. Commitment to safety, quality, and site procedures. Punctual, disciplined, and reliable.<br>Work Environment The position is based within building facilities and Operations & Maintenance environments and may require working in plant rooms, electrical/ELV rooms, ceilings, risers, equipment rooms, and other technical areas. The technician may be required to work shifts, respond to emergency maintenance requests, and perform tasks in accordance with site operational requirements. Trade Test Shortlisted candidates may be required to complete a practical ELV technical assessment covering areas such as:CCTV troubleshooting Access Control troubleshooting Fire Alarm basic troubleshooting Cable termination and testing Fault tracing Reading basic ELV drawings Use of ELV tools and testing equipment Basic IP/network connectivity<br>Equal Opportunity Statement We are committed to maintaining an inclusive and professional workplace and providing equal opportunities to qualified candidates.

POSITION SUMMARYStaff Asset and Reliability Engineer is a high-level technical position foundational to the operation and maintenance of the facilities. NATURE & SCOPE<br>Staff Asset and Reliability Engineer drives improvements in asset performance, reliability, and lifecycle management. This role is key to ensuring our critical equipment and systems perform optimally while minimizing downtime and maximizing return on investment. This engineer combines deep technical expertise with strategic insight to deliver asset management and reliability engineering best practices, support maintenance strategies, and mentor junior engineers.<br>KEY RESPONSIBILITIES<br>Asset Management:Lead asset lifecycle planning including acquisition, operation, maintenance, and disposal strategies. Develop and maintain the asset register and criticality rankings. Analyze asset performance data to identify trends, optimize performance, and extend asset life. Collaborate with finance and operations to develop capital and replacement plans.<br>Reliability Engineering:Conduct Root Cause Failure Analysis (RCFA) and Failure Modes and Effects Analysis (FMEA/FMECA). Develop, review, and refine preventive and predictive maintenance strategies using RCM principles. Implement reliability improvement projects for critical assets and systems. Monitor and optimize key reliability metrics (MTBF, MTTR, asset availability, etc.).<br>Technical Leadership:Serve as SME (Subject Matter Expert) for condition monitoring, asset health, and reliability tools. Lead cross-functional reliability improvement teams and mentoring of junior staff. Interface with OEMs, vendors, and contractors to resolve complex technical issues.<br>Systems and Tools:Utilize EAM/CMMS platform for maintenance planning and analysis. Support implementation of digital tools such as APM (Asset Performance Management), IoT sensors, or data analytics platforms. Develop dashboards and reports to communicate asset health and reliability performance.<br><br>EDUCATION & EXPERIENCE:Bachelor’s degree in an engineering discipline. Minimum of 10 years of maintenance and reliability engineering experience in an operating industrial plant with 5 years specifically related to reliability and asset engineering. Strong knowledge of asset management frameworks. Proficiency in RCA, RCM, REX, FMEA/FMECA, Weibull analysis, and reliability-centered maintenance tools, maintenance data analysis and reporting methods. Safety-conscious with strong knowledge of maintenance and safety consensus standards and best practices. Familiar with regulatory and environmental compliance requirements. Strong knowledge of condition monitoring technologies. Experience in one or more of: hydrogen electrolysis, hydrogen storage, ammonia production, power systems, air separation. Familiarity with stage-gated capital project processes and asset handover requirements.

<h3 >About the Company and Opportunity</h3> <p >Saudi Services For Electro Mechanic Works Co. SSEM is seeking a dedicated <strong >Storekeeper</strong> to join its team. This full-time position, based in either Tabuk or Yanbu, Saudi Arabia, offers a valuable opportunity for individuals with 0-1 years of experience to contribute to efficient warehouse operations.</p> <h3 >Role Purpose</h3> <p >The Storekeeper plays a crucial role in managing the flow of materials and supplies, ensuring the integrity and accessibility of inventory. This position is central to maintaining organized warehouse operations and supporting various departmental needs through meticulous inventory control and documentation.</p> <h3 >Key Responsibilities</h3> <ul > <li >Receive incoming materials and supplies, verifying their conformity with purchase orders and invoices.</li> <li >Accurately record received items in the approved inventory system and issue corresponding stock cards.</li> <li >Arrange and store materials in an orderly and safe manner to ensure easy access and proper preservation.</li> <li >Issue materials based on approved departmental requests and meticulously document all withdrawals.</li> <li >Monitor stock levels regularly and alert management when reordering is required to prevent shortages.</li> <li >Conduct regular physical inventory counts and reconcile results with system records.</li> <li >Maintain cleanliness, order, and strict adherence to safety procedures within the warehouse premises.</li> <li >Prepare periodic reports on stock movements and any observations related to warehouse operations.</li> <li >Coordinate effectively with the Procurement and Finance Departments to ensure all related data and documentation are updated.</li> <li >Ensure that all stock records and documents are properly organized, maintained, and easily accessible for auditing and reference.</li> </ul> <h3 >Required Qualifications</h3> <ul > <li >0-1 years of experience in a storekeeping or inventory management role.</li> <li >Demonstrated experience with Enterprise Resource Planning (ERP) systems, specifically in functions related to receiving, issuing, and reporting.</li> </ul> <h3 >Work Setting</h3> <p >This is a full-time position located in either Tabuk or Yanbu, Saudi Arabia. The role requires a proactive approach to maintaining an organized and efficient warehouse environment, contributing directly to the operational success of SSEM.</p> <h3 >Application Information</h3> <p >Candidates who meet the above requirements are encouraged to apply. SSEM is committed to building a skilled and dedicated team.</p>

Job Title: Project Manager Industry: Facility Management / Operation & Maintenance Location: Saudi Arabia, Tabuk<br>Job Summary The Project Manager is responsible for leading and managing facility management operations across medium to large-scale projects, typically covering a workforce of approximately 200 to 450 employees. The role ensures the successful delivery of hard and soft FM services in line with contractual requirements, client expectations, approved budgets, service level agreements, quality standards, and regulatory compliance. The Project Manager acts as the main custodian of the project contract and budget, overseeing operational performance, workforce planning, vendor management, risk control, client satisfaction, and continuous improvement across the project.<br><br>Key Responsibilities Lead the full delivery of facility management services, including hard services, soft services, maintenance, cleaning, housekeeping, hospitality, and external space services. Manage day-to-day project operations to ensure service efficiency, quality, compliance, and client satisfaction. Develop project plans, operational strategies, objectives, timelines, and performance targets. Monitor project budgets, revenue, costs, expenditure, and variance reports to ensure financial control. Ensure full compliance with contractual obligations, SLAs, performance benchmarks, governmental regulations, HSE standards, and industry requirements. Lead and manage project teams including engineers, supervisors, technicians, cleaners, and support staff. Coordinate with HR on workforce planning, manpower requirements, employee performance, and team development. Manage client relationships, address concerns, monitor satisfaction levels, and ensure timely service delivery. Identify project risks and implement mitigation plans, contingency plans, and corrective actions. Monitor vendor and subcontractor performance to ensure quality delivery and contract compliance. Coordinate with procurement teams for materials, resources, vendor agreements, and operational requirements. Prepare project reports, operational updates, KPIs, budget reviews, and performance dashboards for management. Conduct regular audits of operational processes and identify areas for improvement. Drive continuous improvement, automation, digital solutions, and best practices across FM operations. Promote a culture of safety, professionalism, teamwork, accountability, and service excellence.<br>Requirements Bachelor’s degree in Mechanical Engineering, Electrical Engineering, Civil Engineering, or a related field. Minimum 12 years of experience in Facility Management, Operations & Maintenance, or large project operations. Previous experience in a leadership or managerial capacity is essential. Strong experience managing large operational teams and FM projects. Solid knowledge of hard services, soft services, building systems, maintenance operations, and technical infrastructure. Strong understanding of project budgeting, cost control, procurement coordination, and contract management. Excellent leadership, communication, stakeholder management, and problem-solving skills. Strong knowledge of HSE, quality standards, building safety, and regulatory compliance. Experience in project estimation and proposal writing is preferred. Professional certifications in Project Management or Facility Management are preferred.<br>Special Conditions Flexibility to respond to emergencies or urgent operational issues. Ability to work across diverse environments, including operational facilities and project sites. Strong attention to detail, employee relations skills, training ability, and practical problem-solving capability.

Note: Candidates with Airport Experience is preferable.<br>Job Purpose:Implementing best customer, subcontractor and supplier relationship management, maintain high customer satisfaction, and help achieve Enova business objectives.<br>Key Accountabilities :<br>Strategy Development & Implementation Provide inputs to the development of the overall Site Operations strategy and participate in developing the KSA business unit strategy in line with the vision, mission, and business objectives of the company. Assisting the Contracts Manager to Deliver the Operations Management strategy for Contractual Sites in the portfolio of assets while ensuring contractual commitments are successfully met.<br>Leadership Manage the effective achievement of the business unit’s objectives through leading the Facilities and Operations team in the assigned project, by setting individual objectives, managing performance, developing and motivating staff, and providing formal and informal feedback and appraisals in order to maximize the subordinates’ and the business unit’s performance.<br>Organization Structure Contribute and assist the director of operations in defining an optimum structure for the business unit/ division so that resources are optimally utilized, and communication takes place in an efficient manner.<br>Budgets & Plans Ensure the planning and allocation of all resources, and the implementation of the appropriate standards and controls to ensure that all activities are carried out in an efficient and effective manner to meet and exceed objectives.<br>Operations & Facilities Management Attend all coordination meetings with the client, tenants and contractors to cope with all HSEEQ, Administration, Human Resources and Public Relations business unit’s and daily activities to be inline with company policy and the project requirement. Monitor resource utilization to ensure that the right number and talent is available for running, accomplishing targets, improving customer satisfaction, and achieving business objectives. Assisting the Contracts Manager in Monitoring and controlling the execution of maintenance contracts, review the preventive and corrective maintenance programs, and supervise the implementation by employees or assigned contractor(s) through reviewing reports and spot-checking as appropriate to ensure the provision of quality maintenance works to the assets/ facilities (including maintenance to BMS, chillers, generators, HVAC, etc.). Ensure that the Annual Leave Planer is completed to have a holistic view on forecasted leaves and employees’ availabilities throughout the year so as to guarantee that the appropriate resourcing is done and that business operations do not get interrupted.<br>Customer Relationship & Management Manage customers’ expectations through clear communication and transparent work attitude in order to be consistent and to develop strong customer relationships. Receive escalated problems and complaints from the Call Centre and ensure that the necessary support and maintenance work is provided to customers in a timely fashion in order to resolve customers’ issues (pertaining to cooling, power, ventilation, plumbing, etc.) and maintain their high levels of satisfaction. Escort customers on daily tours within the premises/ facilities, listen to any feedback or complaints they might have, and delegate any work needed to the subordinates in order to provide customers with the necessary civil, mechanical, electrical, etc. support and maintenance support.<br>Contract Management Assisting the Contracts Manager to Manage the implementation and improvement of policies, guidelines, and processes for contract management and administration to ensure standards are set so that all business requirements are fulfilled while delivering a quality service to customers in line with the corporate strategy. Assisting the Contracts Manager in monitoring of the subcontracting of works (such as fire systems, emergency lighting, vertical transportation, water treatment, etc.). Ensures that subcontractors fulfil their duties in an accurate manner and as per the agreed upon contractual clauses.<br>Audit Assisting the Contracts Manager in Monitoring physical and documentation audits being conducted on subcontractors to ensure that work is being conducted properly and that customers are being served with the highest quality standards, and take the necessary actions upon the detection of unreported/ undisclosed variations and/ or poor performance to safeguard the company against any liabilities. Gathering feedback and monitor satisfaction in order to improve the operations and facilities management services Enova provides in the KSA.<br>Policies, Systems, Processes, & Procedures Develop and ensure the implementation of division policies, procedures, and controls covering all areas of activity so that all relevant procedural/ legislative requirements are fulfilled while delivering a quality and cost-effective service.<br>Health, Safety, Energy, Environment, & Quality (HSEEQ) Ensure compliance to all relevant quality, health, safety, and environmental management policies, procedures, and controls across the department to guarantee employee safety, legislative compliance, delivery of high quality products/service and a responsible environmental attitude.<br>Minimum Qualifications and Knowledge: Bachelor’s Degree in Electrical or Mechanical Engineering, preferably with a Master’s degree in Management or Facilities Management; CMMS knowledge is also preferable10-12+ years experience in operations management including 2 years in a managerial role; exposure to Maintenance and Facilities Management especially in all areas of planning, HSEEQ, supplier relations management, client relations management, maintenance, and contract management

Note: Candidates with Airport Experience is preferable.<br>Job Purpose:Implementing best customer, subcontractor and supplier relationship management, maintain high customer satisfaction, and help achieve Enova business objectives.<br>Key Accountabilities :<br>Strategy Development & Implementation Provide inputs to the development of the overall Site Operations strategy and participate in developing the KSA business unit strategy in line with the vision, mission, and business objectives of the company. Assisting the Contracts Manager to Deliver the Operations Management strategy for Contractual Sites in the portfolio of assets while ensuring contractual commitments are successfully met.<br>Leadership Manage the effective achievement of the business unit’s objectives through leading the Facilities and Operations team in the assigned project, by setting individual objectives, managing performance, developing and motivating staff, and providing formal and informal feedback and appraisals in order to maximize the subordinates’ and the business unit’s performance.<br>Organization Structure Contribute and assist the director of operations in defining an optimum structure for the business unit/ division so that resources are optimally utilized, and communication takes place in an efficient manner.<br>Budgets & Plans Ensure the planning and allocation of all resources, and the implementation of the appropriate standards and controls to ensure that all activities are carried out in an efficient and effective manner to meet and exceed objectives.<br>Operations & Facilities Management Attend all coordination meetings with the client, tenants and contractors to cope with all HSEEQ, Administration, Human Resources and Public Relations business unit’s and daily activities to be inline with company policy and the project requirement. Monitor resource utilization to ensure that the right number and talent is available for running, accomplishing targets, improving customer satisfaction, and achieving business objectives. Assisting the Contracts Manager in Monitoring and controlling the execution of maintenance contracts, review the preventive and corrective maintenance programs, and supervise the implementation by employees or assigned contractor(s) through reviewing reports and spot-checking as appropriate to ensure the provision of quality maintenance works to the assets/ facilities (including maintenance to BMS, chillers, generators, HVAC, etc.). Ensure that the Annual Leave Planer is completed to have a holistic view on forecasted leaves and employees’ availabilities throughout the year so as to guarantee that the appropriate resourcing is done and that business operations do not get interrupted.<br>Customer Relationship & Management Manage customers’ expectations through clear communication and transparent work attitude in order to be consistent and to develop strong customer relationships. Receive escalated problems and complaints from the Call Centre and ensure that the necessary support and maintenance work is provided to customers in a timely fashion in order to resolve customers’ issues (pertaining to cooling, power, ventilation, plumbing, etc.) and maintain their high levels of satisfaction. Escort customers on daily tours within the premises/ facilities, listen to any feedback or complaints they might have, and delegate any work needed to the subordinates in order to provide customers with the necessary civil, mechanical, electrical, etc. support and maintenance support.<br>Contract Management Assisting the Contracts Manager to Manage the implementation and improvement of policies, guidelines, and processes for contract management and administration to ensure standards are set so that all business requirements are fulfilled while delivering a quality service to customers in line with the corporate strategy. Assisting the Contracts Manager in monitoring of the subcontracting of works (such as fire systems, emergency lighting, vertical transportation, water treatment, etc.). Ensures that subcontractors fulfil their duties in an accurate manner and as per the agreed upon contractual clauses.<br>Audit Assisting the Contracts Manager in Monitoring physical and documentation audits being conducted on subcontractors to ensure that work is being conducted properly and that customers are being served with the highest quality standards, and take the necessary actions upon the detection of unreported/ undisclosed variations and/ or poor performance to safeguard the company against any liabilities. Gathering feedback and monitor satisfaction in order to improve the operations and facilities management services Enova provides in the KSA.<br>Policies, Systems, Processes, & Procedures Develop and ensure the implementation of division policies, procedures, and controls covering all areas of activity so that all relevant procedural/ legislative requirements are fulfilled while delivering a quality and cost-effective service.<br>Health, Safety, Energy, Environment, & Quality (HSEEQ) Ensure compliance to all relevant quality, health, safety, and environmental management policies, procedures, and controls across the department to guarantee employee safety, legislative compliance, delivery of high quality products/service and a responsible environmental attitude.<br>Minimum Qualifications and Knowledge: Bachelor’s Degree in Electrical or Mechanical Engineering, preferably with a Master’s degree in Management or Facilities Management; CMMS knowledge is also preferable10-12+ years experience in operations management including 2 years in a managerial role; exposure to Maintenance and Facilities Management especially in all areas of planning, HSEEQ, supplier relations management, client relations management, maintenance, and contract management