وظائف مطورين .Net - الدمام السعودية

<h3 >About the A/C Technician Role</h3> <p >Dana Rayhaan by Rotana in Dammam is seeking a dedicated <strong >A/C Technician</strong> to join its full-time maintenance team. This position is open to professionals with <strong >0-1 years of experience</strong> who are committed to maintaining optimal temperature and air quality control systems within the hotel premises.</p> <h3 >Role Purpose and Contribution</h3> <p >The A/C Technician is primarily responsible for the installation, servicing, and repair of all temperature and air quality control systems. This role is integral to ensuring the comfort and satisfaction of guests by maintaining the efficient operation of critical hotel infrastructure and providing effective solutions to maintenance requirements.</p> <h3 >Key Responsibilities</h3> <ul > <li >Repair, maintain, and provide technical attention to all electrical and mechanical refrigeration systems, including freezers, fridges, ice makers, fan coil units, and chillers.</li> <li >Perform preventive maintenance on all air-conditioning and refrigeration systems throughout the hotel.</li> <li >Address maintenance requests from all departments in a timely manner.</li> <li >Ensure routine cleaning of fan coil units and air-handling unit filters.</li> <li >Cooperate with engineering colleagues in detecting failures of air-condition and refrigeration systems and during function setup.</li> <li >Liaise with and inform the Engineering Storekeeper regarding the purchase of necessary parts and equipment.</li> </ul> <h3 >Technical Operations and System Management</h3> <ul > <li >Check the performance of refrigeration systems and their components regularly.</li> <li >Verify the functionality of all door closing systems on walk-in coolers/freezers, including door gaskets and latches.</li> <li >Inspect and maintain all defrosting systems and the automation of ice makers.</li> <li >Monitor the performance of air-conditioning and chill water systems.</li> <li >Implement strict control measures on the venting of CFCs to the atmosphere.</li> <li >Conduct overhauling of air-condition and refrigeration equipment and systems as required.</li> <li >Check all refrigeration and oil levels and oversee major repairs.</li> </ul> <h3 >Qualifications and Experience</h3> <p >Candidates for this role should possess <strong >0-1 years of experience</strong> in a maintenance capacity, with a focus on air conditioning and refrigeration systems. A foundational understanding of electrical and mechanical refrigeration principles is essential.</p> <h3 >Work Standards and Compliance</h3> <p >The A/C Technician is expected to perform all duties in full compliance with the country's technical regulations and established safety standards. This role requires a proactive approach to maintenance and a commitment to upholding operational excellence within the hotel's engineering department.</p>

<h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">About Perfect Vision and the Role</h3> <p style="margin:0 0 12px; ************;">Perfect Vision is seeking an <strong style="font-weight:700;">Embedded Systems Engineer</strong> to join its team in Dammam, Eastern region. This is a full-time position requiring 5-10 years of experience in embedded development. The successful candidate will be instrumental in designing and building robust firmware for telematics devices.</p> <h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">Role Overview</h3> <p style="margin:0 0 12px; ************;">As an Embedded Systems Engineer, you will develop firmware that enables telematics devices to capture vehicle and asset data, process it at the edge, and securely stream it to the company's platform. This involves writing efficient, robust C/C++ code for constrained hardware, integrating various connectivity solutions and sensors, and establishing a reliable over-the-air update pipeline for the fleet.</p> <h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">Key Responsibilities</h3> <ul style="margin:0 0 12px; padding-inline-start:24px; list-style-type:disc; list-style-position:outside;"> <li style="margin:0 0 6px;">Design, write, and maintain firmware in C/C++ for microcontrollers, operating on RTOS (FreeRTOS/Zephyr) or bare-metal environments.</li> <li style="margin:0 0 6px;">Develop and integrate device drivers and low-level interfaces, including UART, SPI, I2C, ADC, GPIO, and DMA.</li> <li style="margin:0 0 6px;">Implement vehicle-data acquisition systems utilizing protocols such as CAN, OBD-II, J1939, and Modbus.</li> <li style="margin:0 0 6px;">Build cellular connectivity and telemetry solutions using MQTT, TCP/IP, TLS, and potentially CoAP/HTTP.</li> <li style="margin:0 0 6px;">Design robust over-the-air (OTA) firmware update mechanisms, incorporating rollback capabilities and integrity checks.</li> <li style="margin:0 0 6px;">Optimise firmware for low power consumption, minimal memory footprint, and long-term field reliability.</li> <li style="margin:0 0 6px;">Collaborate with hardware engineers during board bring-up phases and with the platform team on device-to-cloud data contracts.</li> <li style="margin:0 0 6px;">Write unit and integration tests, perform debugging with JTAG/SWD, and provide support for field diagnostics.</li> </ul> <h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">Required Qualifications and Experience</h3> <ul style="margin:0 0 12px; padding-inline-start:24px; list-style-type:disc; list-style-position:outside;"> <li style="margin:0 0 6px;">A degree in Computer Engineering, Electronic Engineering, Computer Science, or an equivalent field.</li> <li style="margin:0 0 6px;">5-10 years of professional experience in embedded development.</li> <li style="margin:0 0 6px;">Strong proficiency in C (and ideally C++) for resource-constrained microcontrollers.</li> <li style="margin:0 0 6px;">Hands-on experience with RTOS concepts, interrupt handling, and real-time constraints.</li> <li style="margin:0 0 6px;">Practical experience with serial and embedded protocols such as UART, SPI, and I2C, along with at least one vehicle bus protocol (CAN or OBD-II).</li> <li style="margin:0 0 6px;">Experience with cellular or wireless connectivity and MQTT/TCP-IP networking.</li> <li style="margin:0 0 6px;">Comfortable using hardware debug tools, including oscilloscopes, logic analysers, and JTAG/SWD.</li> </ul> <h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">Preferred Skills and Knowledge</h3> <ul style="margin:0 0 12px; padding-inline-start:24px; list-style-type:disc; list-style-position:outside;"> <li style="margin:0 0 6px;">Experience with shipping OTA update systems and secure boot implementations.</li> <li style="margin:0 0 6px;">Familiarity with GNSS/GPS positioning and dead-reckoning techniques.</li> <li style="margin:0 0 6px;">Knowledge of embedded security principles, including TLS, key storage, and secure elements.</li> <li style="margin:0 0 6px;">Exposure to Continuous Integration (CI) practices for firmware and hardware-in-the-loop testing.</li> </ul> <h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">Application Information</h3> <p style="margin:0 0 12px; ************;">Perfect Vision offers a challenging opportunity for an Embedded Systems Engineer to contribute to advanced telematics solutions. Salary for this position will be disclosed during the interview process.</p>

<h3 >About Perfect Vision and the Role</h3> <p >Perfect Vision is seeking an <strong >Embedded Systems Engineer</strong> to join our team in Dammam, Eastern region. This is a full-time position suitable for candidates with <strong >0-1 years of experience</strong> in embedded systems development. The successful candidate will be instrumental in designing and building the firmware for our telematics devices.</p> <h3 >Role Overview</h3> <p >As an Embedded Systems Engineer, you will develop robust and efficient firmware that powers our telematics devices. This firmware is critical for capturing and processing vehicle and asset data at the edge, and securely streaming it to our platform. The role involves working with constrained hardware, integrating various connectivity solutions and sensors, and ensuring reliable over-the-air update mechanisms that our fleet depends on.</p> <h3 >Key Responsibilities</h3> <ul > <li >Design, write, and maintain firmware in C/C++ for microcontrollers, operating on RTOS (FreeRTOS/Zephyr) or bare-metal environments.</li> <li >Develop and integrate device drivers and low-level interfaces, including UART, SPI, I2C, ADC, GPIO, and DMA.</li> <li >Implement vehicle-data acquisition protocols such as CAN, OBD-II, J1939, and Modbus.</li> <li >Build cellular connectivity and telemetry solutions using MQTT, TCP/IP, TLS, and potentially CoAP/HTTP.</li> <li >Design robust over-the-air (OTA) firmware update mechanisms, incorporating rollback capabilities and integrity checks.</li> <li >Optimize firmware for low power consumption, minimal memory footprint, and long-term field reliability.</li> <li >Collaborate with hardware engineers during board bring-up and with the platform team on device-to-cloud data contracts.</li> <li >Write unit and integration tests, perform debugging using JTAG/SWD, and support field diagnostics.</li> </ul> <h3 >Required Technical Expertise</h3> <p >Candidates should possess practical experience with:</p> <ul > <li >Firmware development in C/C++ for microcontrollers.</li> <li >Real-time operating systems (RTOS) like FreeRTOS or Zephyr, or bare-metal development.</li> <li >Low-level interface development (UART, SPI, I2C, ADC, GPIO, DMA).</li> <li >Vehicle communication protocols (CAN, OBD-II, J1939, Modbus).</li> <li >Network protocols and telemetry (MQTT, TCP/IP, TLS, CoAP/HTTP).</li> <li >Debugging tools such as JTAG/SWD.</li> </ul> <h3 >Qualifications and Experience</h3> <p >This role requires <strong >0-1 years of professional experience</strong> in embedded systems engineering or a related field. A foundational understanding of the principles of embedded software design and development is essential.</p> <h3 >Application Process</h3> <p >Interested candidates are invited to submit their application for consideration.</p>

<h3 >About Almarai</h3> <p >Almarai is recognized as the world’s largest vertically integrated dairy and the region’s largest food and beverage manufacturing and distribution company. Headquartered in the Kingdom of Saudi Arabia, Almarai is ranked as the <strong >#1 FMCG Brand in the MENA region</strong> and holds a market leadership position across all its categories throughout the GCC. The company currently employs over 46,000 individuals, servicing approximately 110,000 retail outlets, and reported a net income of SAR * Billion on sales of SAR ** Billion in 2024. Ongoing expansion programs and strategic acquisitions contribute to opportunities within its multinational team dedicated to furthering growth plans for the group.</p> <h3 >Role Overview: Area Sales Manager II</h3> <p >Almarai is seeking an <strong >Area Sales Manager II</strong> to join its team. This full-time position is available in <strong >Dammam</strong> and <strong >Riyadh</strong>. The primary purpose of this role is to direct, control, and effectively manage van sales operations across designated sales areas within an assigned territory, ensuring the achievement of budgeted financial targets for Almarai products.</p> <h3 >Core Responsibilities</h3> <ul > <li >Direct, control, and manage van sales operations across sales areas within the assigned territory.</li> <li >Achieve budgeted volume targets for Almarai products.</li> <li >Achieve budgeted margin targets for Almarai products.</li> <li >Continuously monitor and review team performance to ensure objectives are met.</li> </ul> <h3 >Candidate Qualifications</h3> <ul > <li >Hold a bachelor’s degree.</li> <li >Possess 2-5 years of experience in a relevant sales management role.</li> <li >Demonstrate experience in budgetary preparation and planning.</li> <li >Have hands-on knowledge and experience with SAP or a similar enterprise resource planning (ERP) package.</li> </ul> <h3 >Essential Skills</h3> <ul > <li >Highly skilled in reporting and communication.</li> <li >Proficient in Microsoft Office applications.</li> <li >Demonstrated proficiency in team management and leadership skills.</li> <li >Ability to function effectively as a team player.</li> </ul> <h3 >Application Information</h3> <p >Qualified candidates are invited to apply for the Area Sales Manager II position at Almarai.</p>

<h3 >About the Role</h3> <p >Siemens Energy is seeking a <strong >Field Service Site Lead</strong> to join their team in Dammam, Eastern region. This full-time role involves leading and coordinating large teams of field service specialists, technicians, and supervisors during outage and field execution activities. The primary objective is to ensure that all work is completed safely, efficiently, and to the highest quality standards, maximizing plant reliability and performance.</p> <h3 >Key Responsibilities</h3> <ul > <li >Lead and coordinate outage execution activities, ensuring work is planned, scheduled, and delivered safely, efficiently, and within project scope.</li> <li >Oversee the assembly and disassembly of mechanical components, advanced I&amp;C commissioning, troubleshooting, and root cause investigations across gas turbines, steam turbines, generators, and associated auxiliary systems.</li> <li >Collaborate closely with Project Managers, customers, Operations Management, and Service Engineering teams to drive successful project outcomes and customer satisfaction.</li> <li >Manage site resources, parts requirements, risks, delays, and customer communications, including leading meetings and providing regular progress updates and outage reports.</li> <li >Apply advanced technical expertise and analytical problem-solving skills to resolve complex equipment, operational, and cross-functional challenges.</li> <li >Provide leadership, mentoring, and technical guidance to multidisciplinary field teams while maintaining high standards of safety, quality, and operational excellence.</li> </ul> <h3 >Qualifications and Experience</h3> <ul > <li >A minimum of <strong >10 years of experience</strong> in a relevant field.</li> <li >Demonstrated ability to lead and coordinate large teams in field service environments.</li> <li >Proven technical expertise in mechanical components, I&amp;C commissioning, troubleshooting, and root cause investigations for power generation equipment.</li> </ul> <h3 >About the Team</h3> <p >This role is part of the <strong >Gas Services division</strong>, which focuses on low-emission power generation through service and decarbonization. The division manages zero or low emission power generation, all gas turbines, steam turbines, and generators, and offers decarbonization opportunities through service offerings, modernization, and digitalization of the fleet.</p> <h3 >About Siemens Energy</h3> <p >Siemens Energy is an energy technology company with approximately 100,000 employees across more than 90 countries. The company develops future energy systems to meet global energy demand reliably and sustainably. Its technologies drive the energy transition and contribute to one-sixth of the world's electricity generation. Siemens Energy is committed to sustainable, reliable, and affordable energy, building on a 150-year legacy of innovation focused on decarbonization, new technologies, and energy transformation.</p> <h3 >Commitment to Diversity</h3> <p >Siemens Energy values diversity and inclusion, drawing strength from over 130 nationalities. The company celebrates individual character and does not discriminate based on ethnic background, gender, age, religion, identity, or disability, aiming to energize all of society.</p>

<br><p>Reviewing ITP, Data sheet, Procedures, Drawings</p><p>Comprehensive Stage-wise Inspection:</p><ol><li><p>Daily inspection schedule, last day updates etc.</p></li><li><p>Conduct inspections at all manufacturing stages including:</p></li></ol><p>a. Material identification and verification (traceability) base frames.</p><p>b. Setup inspections for base frames, Structure.</p><p>c. Welding visual and dimensional inspections base frames, Structure.</p><p>d. Post-Blasting visual checks.</p><p>e. Painting Verification & reporting.</p><p>f. Check list, Punch points & reporting (Internal).</p><p>g. PP, VI & Documents review & reporting (External).</p><p>h. Final Painting Inspection & Reporting.</p><p>Interdepartmental Coordination:</p><ol><li><p>Collaborate with production, planning, and QC teams to ensure timely execution the inspection</p></li></ol><p>activities along with report.</p><ol><li><p>Comments resolution on Painting procedure and submission coordinating with respective team</p></li></ol><p>lead.</p><p>Vendor and External Inspection Management:</p><ol><li><p>Coordinate with external vendors for Structurer and Painting Inspection.</p></li><li><p>Interface with third-party inspection agencies and customers for inspection stages as per the</p></li></ol><p>approved Test Plan.</p><p>Issue Escalation and Resolution:</p><ol><li><p>Identify and escalate critical quality issues to the Manager or relevant superior for timely</p></li></ol><p>resolution.</p><br><p>Technical Review and Documentation:</p><ol><li><p>Check and endorse supplier Painting test certificates for components where painting in supplier</p></li></ol><p>Scope.</p><p>Quality System Compliance:</p><ol><li><p>Ensure adherence to internal & customer (If Applicable) quality standards.</p></li></ol><p>Inspection Reporting and Documentation:</p><ol><li><p>Preparing the Inspection offer sheet as per the Inspection NOI.</p></li><li><p>Prepare detailed inspection reports for all stages in accordance with the approved QCP and ensure</p></li></ol><p>that they are duly signed by all concerned parties.</p><ol><li><p>Handover all sign report to the document controller.</p></li><li><p>Verify and maintain inspection checklists.</p></li></ol><p><strong>Desired Candidate Profile</strong></p><p>a. Bachelor's degree in mechanical engineering (BGAS-CSWIP). b. Strong communication and problem-solving skills, and ability to work well in a team environment. c. Proficiency in MS Excel and other relevant software applications.</p>

<h3 >About Almarai</h3> <p >Almarai is recognized as the world’s largest vertically integrated dairy company and the largest food and beverage manufacturing and distribution company in the region. Headquartered in the Kingdom of Saudi Arabia, Almarai is ranked as the <strong >#1 FMCG Brand</strong> in the MENA region and holds a market leadership position across all its categories within the GCC. The company currently employs over 46,000 individuals, serving approximately 110,000 retail outlets. In 2024, Almarai reported a net income of SAR * Billion on sales of SAR ** Billion.</p> <h3 >The Role of Area Sales Manager II</h3> <p >Almarai is seeking an <strong >Area Sales Manager II</strong> to join its team in Dammam or Riyadh. This full-time position involves directing, controlling, and managing van sales operations within assigned sales areas to achieve budgeted volume and margin targets for Almarai products. The role requires continuous monitoring and review of team performance to ensure objectives are met.</p> <h3 >Key Responsibilities</h3> <ul > <li >Direct and control van sales operations within the designated territory.</li> <li >Effectively manage sales areas to achieve budgeted volume and margin for Almarai products.</li> <li >Continuously monitor and review the performance of the sales team.</li> <li >Ensure alignment with company sales strategies and targets.</li> </ul> <h3 >Qualifications and Experience</h3> <ul > <li >A minimum of <strong >2-5 years of relevant experience</strong> in sales management.</li> <li >Demonstrated ability to manage and direct sales teams.</li> <li >Proven track record of achieving sales targets.</li> </ul> <h3 >Work Environment and Growth</h3> <p >This role is based in either <strong >Dammam or Riyadh</strong> and is a full-time position. Almarai is currently undergoing an aggressive expansion program, including acquisitions in new vertical markets, which contributes to a dynamic multinational team environment focused on furthering group growth plans.</p> <h3 >Application Process</h3> <p >This opportunity is part of Almarai's ongoing growth. Qualified candidates are encouraged to apply.</p>

<p><strong>Roles &amp; Responsibilities</strong></p><ul><li>Drive <strong>new business acquisition</strong> and <strong>sales pipeline growth</strong> within the Saudi (KSA) market.</li><li>Identify, target, and close opportunities with <strong>SMEs and enterprise clients</strong> across key industries.</li><li>Lead <strong>pre-sales activities</strong>, including requirement gathering, solution presentations, proposals, and RFP responses.</li><li>Promote and sell <strong>Odoo ERP solutions or similar ERP/CRM/Business Management software</strong>.</li><li>Build and maintain strong relationships with <strong>decision-makers, stakeholders, and C-level executives</strong>.</li><li>Conduct <strong>market and competitor analysis</strong> to identify trends, pricing strategies, and growth opportunities in KSA.</li><li>Collaborate closely with <strong>technical, implementation, and delivery teams</strong> to ensure solution alignment with client needs.</li><li>Achieve assigned <strong>sales targets, revenue goals, and KPIs</strong>.</li><li>Represent the company at <strong>client meetings, industry events, and networking forums</strong> within Saudi Arabia.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><strong>8 years of experience</strong> in <strong>B2B IT / Software / ERP sales or Business Development</strong>.</li><li><strong>Mandatory experience in Odoo ERP sales</strong> or <strong>relevant ERP solutions</strong> (SAP, Oracle, Microsoft Dynamics, etc.).</li><li>Strong understanding of the <strong>Saudi / GCC business landscape</strong>, client behavior, and sales cycles.</li><li>Ability to <strong>translate technical solutions into clear business value propositions</strong>.</li><li>Proven track record of <strong>closing deals and managing the full sales lifecycle</strong>.</li><li>Excellent <strong>communication and presentation skills</strong>.</li><li><strong>Arabic language proficiency is highly preferred</strong>; English proficiency is mandatory.</li><li>Strong negotiation, relationship management, and consultative selling skills.</li><li>Self-driven, target-oriented, and comfortable working in a fast-paced environment.</li></ul>

<h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">About the Role</h3> <p style="margin:0 0 12px; ************;">Nahdi Medical Co. is seeking a <strong style="font-weight:700;">Dermatology Consultant</strong> to join its medical team in Dammam, Eastern region. This full-time position involves providing expert dermatological care, diagnosing and treating patients, and contributing to the continuous improvement of clinic services. The Consultant will play a vital role in patient education and supporting the professional development of junior staff.</p> <h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">Key Responsibilities</h3> <ul style="margin:0 0 12px; padding-inline-start:24px; list-style-type:disc; list-style-position:outside;"> <li style="margin:0 0 6px;">Examine patients, take comprehensive medical histories, and document findings accurately.</li> <li style="margin:0 0 6px;">Order, perform, and interpret diagnostic tests to diagnose injuries or illnesses effectively.</li> <li style="margin:0 0 6px;">Design and execute individualized patient care plans, including prescribing appropriate medications.</li> <li style="margin:0 0 6px;">Educate patients on their health conditions, necessary investigations, treatment options, medication use, and preventive healthcare practices.</li> <li style="margin:0 0 6px;">Fulfill all obligations related to patient records and ensure their accuracy and completeness.</li> <li style="margin:0 0 6px;">Perform specialty-specific tasks and exercise clinical privileges in accordance with training, experience, skills, and Saudi health council guidelines.</li> <li style="margin:0 0 6px;">Adhere to all Nahdi Care Clinics (NCC) Policies and Procedures, Bylaws, Strategic Plan, Rules &amp; Regulations, and CBAHI standards of care.</li> <li style="margin:0 0 6px;">Establish and maintain effective and cooperative working relationships with other departments, local agencies, vendors, patients, and their families.</li> <li style="margin:0 0 6px;">Support top management with recommendations and ideas for improving services and staff performance within the clinic.</li> </ul> <h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">Professional Development and Collaboration</h3> <p style="margin:0 0 12px; ************;">The Dermatology Consultant will actively contribute to a culture of continuous learning and professional excellence within the clinic.</p> <ul style="margin:0 0 12px; padding-inline-start:24px; list-style-type:disc; list-style-position:outside;"> <li style="margin:0 0 6px;">Provide second opinions for specialists and senior specialists to ensure knowledge sharing and adherence to best practices.</li> <li style="margin:0 0 6px;">Support the Medical Director, as needed, in the performance management process for specialists and senior specialists by providing objective evaluations.</li> <li style="margin:0 0 6px;">Actively participate in all assigned NCC Committees and Task Forces.</li> <li style="margin:0 0 6px;">Participate in continuous quality improvement activities and ensure compliance with Clinical, MOH, and CBAHI quality standards and regulations.</li> <li style="margin:0 0 6px;">Contribute to the continuous professional development of all junior staff.</li> <li style="margin:0 0 6px;">Develop, participate in, and support active Continuing Medical Education programs for the assigned section, department, or clinic.</li> </ul> <h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">Qualifications and Experience</h3> <ul style="margin:0 0 12px; padding-inline-start:24px; list-style-type:disc; list-style-position:outside;"> <li style="margin:0 0 6px;">A minimum of <strong style="font-weight:700;">5 to 10 years</strong> of experience in Dermatology.</li> <li style="margin:0 0 6px;">Licensed as a Consultant in the related specialty from the <strong style="font-weight:700;">Saudi Commission for Health Specialties</strong>.</li> <li style="margin:0 0 6px;">Demonstrated evidence-based practice orientation.</li> <li style="margin:0 0 6px;">Ability to integrate population factors of heritage, environment, and disease prevalence into patient care.</li> </ul> <h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">Work Environment</h3> <p style="margin:0 0 12px; ************;">This full-time position operates within a clinical setting, adhering to a structured work schedule.</p> <ul style="margin:0 0 12px; padding-inline-start:24px; list-style-type:disc; list-style-position:outside;"> <li style="margin:0 0 6px;">Work Location: 100% indoors.</li> <li style="margin:0 0 6px;">Working Days: 6 working days per week.</li> <li style="margin:0 0 6px;">Days Off: 1 day off per week.</li> <li style="margin:0 0 6px;">Working Hours: 8 net working hours per day, based on a shift schedule approved by the head of department.</li> <li style="margin:0 0 6px;">Compliance: Completes fire safety requirements and complies with clinical and departmental structure standards, including attendance.</li> </ul> <h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">Application Process</h3> <p style="margin:0 0 12px; ************;">Interested candidates who meet the specified qualifications are encouraged to apply. Salary details for this position will be discussed during the interview process.</p>

<h3 >Job Summary</h3> <p >Mindfield Resources is seeking an experienced Director – Retail Asset Management for a leading real estate organization in Saudi Arabia. This full-time, senior leadership position is based in Dammam and Al Khobar, and involves leading the overall performance of a major retail destination in Al Khobar. The role requires end-to-end accountability for the retail asset's commercial, financial, and operational performance.</p> <h3 >Role Overview</h3> <p >The Director – Retail Asset Management will function as the business leader for the asset. This involves driving occupancy rates, enhancing tenant performance, increasing footfall, maximizing revenue and profitability, and ensuring a positive customer experience. The role requires close collaboration with centralized Leasing, Finance, Marketing, and Projects teams to achieve these objectives.</p> <h3 >Key Responsibilities</h3> <ul > <li >Manage the retail asset's annual business plan, operating P&amp;L, revenue, OPEX, and overall commercial performance.</li> <li >Drive occupancy, tenant sales, footfall, collections, Net Operating Income (NOI)/EBITDA, and overall asset performance.</li> <li >Lead the mall's tenant mix strategy, identifying category gaps and opportunities to strengthen the retail proposition.</li> <li >Partner with the Leasing team to attract anchor, flagship, destination, and strategic local/international brands.</li> <li >Build senior relationships with key tenants to drive tenant retention and performance.</li> <li >Monitor vacancies, renewals, the leasing pipeline, and upcoming expiries.</li> <li >Oversee tenant fit-out and opening readiness, ensuring stores open within agreed timelines.</li> <li >Lead overall mall operations, including customer experience, security, housekeeping, parking, and service delivery.</li> <li >Ensure effective facilities management, asset performance, Health, Safety, and Environment (HSE) compliance, and service-provider management.</li> <li >Lead the mall management team and maintain strong relationships with tenants, authorities, contractors, and other stakeholders.</li> </ul> <h3 >Qualifications and Experience</h3> <ul > <li >A minimum of 10 years of relevant experience in retail asset management.</li> <li >Demonstrated leadership experience with end-to-end accountability for commercial, financial, and operational performance.</li> <li >Proven ability to drive key performance indicators such as occupancy, revenue, and profitability.</li> </ul> <h3 >Location</h3> <p >This position is based in Dammam and Al Khobar, Saudi Arabia.</p> <h3 >Application Information</h3> <p >Salary details for this role will be disclosed during the recruitment process.</p>

<h3 >About the Role</h3> <p >Nahdi Medical Co. is seeking a dedicated <strong >Dentist GP Assistant</strong> to join our full-time team in Dammam, Eastern Region. This role is central to providing comprehensive chairside assistance and clinical support to general or specialist dentists during various dental procedures. Candidates should possess <strong >5-10 years of relevant experience</strong> in a dental clinical setting.</p> <h3 >Chairside Assistance and Procedure Support</h3> <ul > <li >Provide complete chairside assistance to general or specialist dentists across a range of diagnostic, operative, surgical, periodontal, preventive, orthodontic, prosthodontic, endodontic, and pedodontic procedures during patient examination and treatment.</li> <li >Anticipate the dentist’s needs and actively practice four-handed dentistry to ensure efficient operative procedures for patients, or as assigned to a dental surgical operating team.</li> <li >Participate directly with the dentist in patient examination and treatment by retracting cheeks and tissues, and by irrigating and aspirating mouth fluids without causing harm or discomfort to the patient.</li> </ul> <h3 >Clinical and Patient Care Functions</h3> <ul > <li >Perform essential clinical functions including preparing and dismissing patients, point-of-use cleaning of instrumentation, and disinfecting equipment.</li> <li >Provide post-operative instructions to patients as prescribed by the dentist.</li> <li >Execute expanded duty procedures under the direct supervision of the dentist as required.</li> <li >Instruct patients in post-operative home care procedures as directed by the dentist.</li> </ul> <h3 >Record Management and Patient History</h3> <ul > <li >Review patient’s medical history, alert the dentist to significant problems, assist in updating the patient’s history, and flag the chart to note critical issues.</li> <li >Accurately chart the findings of the patient’s oral conditions as reported by the doctor and record the treatment rendered in the patient’s permanent chart.</li> <li >Maintain supply order and ensure all applicable records are kept as requested by the dentist.</li> </ul> <h3 >Emergency Response and Professional Skills</h3> <ul > <li >Maintain and periodically review skills in First Aid and Cardio-Pulmonary Resuscitation (CPR).</li> <li >Handle medical emergencies effectively until the dentist arrives on the scene, or assist the dentist in rendering emergency first aid until additional medical help is available.</li> <li >Perform other miscellaneous related duties as requested to support the dental team.</li> </ul> <h3 >Work Environment and Schedule</h3> <p >This is a full-time position operating entirely within an <strong >indoor clinical environment</strong>. The work schedule includes <strong >6 working days</strong> per week with <strong >1 day off</strong>. Daily working hours are <strong >8 net hours</strong>, structured according to a shift schedule approved by the head of the department.</p>

<h3 >About PepsiCo</h3> <p >PepsiCo products are enjoyed by consumers more than one billion times a day in over 200 countries and territories worldwide. In 2021, PepsiCo generated more than $79 billion in net revenue, driven by a complementary portfolio of beverages and convenient foods, including brands such as LAY’S®, DORITOS®, CHEETOS®, GATORADE®, PEPSI®, and QUAKER®. The company's vision is to be the Global Leader in Beverages and Convenient Foods by Winning with PepsiCo Positive (pep+), a strategic end-to-end transformation that places sustainability and human capital at the core of value creation and growth.</p> <h3 >Role Summary</h3> <p >PepsiCo is seeking an <strong >LD&amp;T Asst Scheduler</strong> to join our team in Dammam, Eastern Region. This full-time role involves overseeing all internal warehouse activities, including managing stock issues, receiving goods, controlling inventory, and allocating tasks to laborers to ensure optimal productivity. The Assistant Scheduler will coordinate with the Storeman for stock allocation to maintain a smooth flow of order preparation and invoicing. The position requires 2-5 years of relevant experience.</p> <h3 >Key Responsibilities</h3> <ul > <li >Manage shift handovers, detailing all pending work to ensure operational continuity.</li> <li >Execute off-loading and loading procedures by accurately completing checklists and reporting to Storekeepers.</li> <li >Allocate jobs to laborers to maintain and optimize productivity.</li> <li >Monitor stock during loading, reporting irregularities such as incorrect stickers, missing or excess cases, and empty pallets.</li> <li >Conduct daily physical counts of goods for inventory reconciliation and report findings to the Storeman.</li> <li >Adhere to hygiene processes, ensuring all points are covered according to the established checklist.</li> <li >Coordinate with forklift operators for the rearrangement of storage and movement of goods to facilitate the First-Expired, First-Out (FEFO) procedure.</li> <li >Ensure all warehouse equipment is well-maintained, used properly, and that periodic maintenance is recorded.</li> <li >Implement, sustain, and participate in the continual improvement of the EHS Management System (MS) within the area of responsibility, in accordance with legislations, PepsiCo GEHSMS, and relevant EHS standards, ensuring proper controls for all hazards and risks associated with activities and achieving EHS targets.</li> </ul> <h3 >Qualifications and Experience</h3> <ul > <li >Minimum of two years of experience in a supply chain role, with exposure to cross-functional positions.</li> <li >Experience in an FMCG business is preferred.</li> <li >Additional experience in a labor-intensive organization is also preferred.</li> <li >High school certificate in any faculty.</li> </ul> <h3 >Required Skills</h3> <ul > <li >Self-motivated with the ability to identify, initiate, and implement corrective actions.</li> <li >Highly effective communication skills.</li> <li >Ability to control and manage laborers across multiple functions.</li> <li >Capacity for flexible thinking while applying systematic problem-solving approaches.</li> </ul> <h3 >Work Type and Location</h3> <p >This is a full-time position based in Dammam, Eastern Region, offering an opportunity to contribute to PepsiCo's supply chain operations.</p>

<h3 >About the Role</h3> <p >Nahdi Medical Co. is seeking an <strong >Otorhinolaryngology (ENT) Registrar</strong> to join its medical team in Dammam, Eastern region. This full-time position is ideal for professionals with <strong >0-1 years of experience</strong>, focusing on the diagnosis and treatment of injuries and illnesses within the ENT department. The Registrar will play a crucial role in providing comprehensive patient care, from initial assessment to treatment planning and patient education.</p> <h3 >Key Responsibilities</h3> <ul > <li >Assess patients thoroughly and document all findings accurately.</li> <li >Design and execute individualized patient care plans.</li> <li >Examine patients, take detailed medical histories, and prescribe appropriate medications.</li> <li >Order, perform, and interpret diagnostic tests, reviewing results to inform treatment.</li> <li >Educate patients on their health conditions, required investigations, treatment options, and proper medication use.</li> <li >Counsel patients on health promotion, disease prevention, diet, hygiene, and preventive healthcare relevant to their cases.</li> <li >Fulfill all obligations related to maintaining accurate and complete patient records.</li> <li >Perform other job-related duties and responsibilities as assigned by the department head.</li> </ul> <h3 >Specialty-Specific Duties</h3> <p >The Registrar will exercise specific clinical privileges based on their training, experience, skills, and the guidelines established by the Saudi Health Council. This includes performing additional tasks aligned with their specialty and clinical privileges as required by the department.</p> <h3 >Compliance and Professional Development</h3> <ul > <li >Adhere to all Nahdi Care Clinics (NCC) Policies and Procedures (P&amp;P), Bylaws, Strategic Plan, Rules &amp; Regulations, and the mission, vision, goals, and practice guidelines of NCC.</li> <li >Comply with CBAHI standards of care and clinical &amp; departmental structure standards, including attendance.</li> <li >Establish and maintain effective and cooperative working relationships with other NCC departments, local agencies, vendors, patients, and their families.</li> <li >Actively participate in all NCC Committees and Task Forces to which assigned.</li> <li >Participate in continuous quality improvement and program evaluation activities, ensuring Clinical, MOH, and CBAHI quality standards are met.</li> <li >Contribute to the continuous professional development of all junior staff.</li> <li >Integrate evidence-based practices and population factors (heritage, environment, disease prevalence) into patient care.</li> <li >Develop, participate in, and support active Continuing Medical Education (CME) programs for the Section, Department, or Clinical area as assigned by the chairman, including rounds, conferences, lectures, and journal clubs.</li> <li >Complete all required fire safety training and requirements.</li> </ul> <h3 >Qualifications and Experience</h3> <p >Candidates for this role must possess <strong >0-1 years of relevant experience</strong> as an Otorhinolaryngology Registrar. A strong foundation in ENT diagnostics and treatment, coupled with a commitment to patient education and adherence to medical standards, is essential for success in this position.</p> <h3 >Work Schedule and Environment</h3> <p >This full-time position operates in an indoor clinical environment, accounting for 100% of working hours. The work schedule consists of <strong >6 working days</strong> per week, with 1 day off. Daily working hours are 8 net hours, structured according to a shift schedule approved by the head of the department.</p>

<h3 >About Chalhoub Group</h3> <p >For over seven decades, Chalhoub Group has established itself as a partner and creator of luxury experiences across the Middle East. The Group operates as a hybrid luxury retailer, managing a portfolio of over 10 owned brands and providing distribution and marketing expertise for more than 400 international names in luxury fashion, beauty, jewellery, watches, eyewear, and art de vivre categories. Committed to innovation and new technologies, Chalhoub Group delivers seamless omnichannel experiences across its extensive network of over 950 stores, online platforms, and mobile applications. The Group fosters a people-at-heart culture, emphasizing diversity, equity, and inclusion, and is dedicated to sustainability, aiming for Net Zero by 2040.</p> <h3 >Role Overview: Consultant Luxury Tech Dyson</h3> <p >Chalhoub Group is seeking a <strong >Consultant Luxury Tech Dyson</strong> to join its team in Dammam, Eastern Region. This is a full-time position suitable for candidates with 0-1 years of experience. The role focuses on delivering exceptional guest experiences, driving sales, and providing expert product consultation for premium technology brands, ensuring customer satisfaction and adherence to brand standards.</p> <h3 >Key Responsibilities</h3> <ul > <li >Build and maintain guest experience standards to foster strong customer loyalty.</li> <li >Address customer queries regarding products, prices, availability, uses, and services.</li> <li >Communicate with customers to assess their needs and provide assistance to meet or surpass their expectations.</li> <li >Advise customers on product ranges best suited to their individual needs.</li> <li >Demonstrate the usage and benefits of various brands and products.</li> <li >Generate sales and achieve established line and sales targets.</li> <li >Track sell-out targets at the store level and participate in achieving incentives.</li> <li >Generate daily sales reports and track post-launch sales at the store level.</li> <li >Ensure merchandising levels in the store comply with brand guidelines.</li> <li >Manage in-store stock replenishment on appropriate shelves/counters at designated times.</li> <li >Report stock shortages using the designated stock order form and ensure stock receipt according to set procedures.</li> </ul> <h3 >Candidate Requirements</h3> <ul > <li >0-1 years of experience in an assisted sales or service-led environment.</li> <li >Previous experience working with or within a premium technology brand.</li> <li >Demonstrated ability to create innovative solutions that address problems or challenge conventional approaches.</li> <li >Readiness to meet sales targets.</li> <li >Strong customer-facing and sales skills, including the ability to adapt communication style to diverse customer needs.</li> <li >A confident and friendly demeanor.</li> <li >Proficiency in providing in-depth, bespoke consultations to answer all customer inquiries.</li> </ul> <h3 >Career Development and Benefits</h3> <p >Chalhoub Group supports its employees in achieving their professional aspirations through enriching experiences, continuous learning and development opportunities, and exposure to various assignments. The Group offers diverse career paths and promotes internal mobility. Employees receive a competitive benefits package, which includes health care, contributions towards child education, remote and flexible working policies, and exclusive employee discounts.</p> <h3 >Application Information</h3> <p >Candidates who meet the outlined requirements are encouraged to apply.</p>

<h3 >About PepsiCo and the Utility Technician Role</h3> <p >PepsiCo is a global leader in beverages and convenient foods, with products enjoyed by consumers worldwide. The company generated over $79 billion in net revenue in 2021, driven by iconic brands such as LAY’S®, DORITOS®, PEPSI®, and GATORADE®. PepsiCo is guided by its vision to "Win with PepsiCo Positive (pep+)", an end-to-end transformation focused on sustainability and human capital. We are seeking a <strong >Utility Technician</strong> to join our full-time team in Dammam, Eastern Region, Saudi Arabia. This role requires 2-5 years of relevant industrial experience.</p> <h3 >Key Responsibilities</h3> <ul > <li >Execute assigned mechanical maintenance tasks and work orders, including corrective, preventive, and engineering-related activities, ensuring safety, quality, and cost-effectiveness within given timeframes.</li> <li >Identify root causes of major and recurring technical problems and implement appropriate solutions.</li> <li >Respond to all technical issues within the assigned area, ensuring proper actions are identified and taken, including identifying required spare parts.</li> <li >Operate all equipment related to utility sections and perform daily parameter readings and monitoring as required.</li> <li >Execute maintenance schedules and plans to maintain plant equipment according to engineering standards, aiming to achieve and maintain line availability and equipment readiness.</li> <li >Ensure proper controls for hazards and risks are in place, contributing to the achievement of EHS targets and adherence to EHS and QFS policies.</li> <li >Supervise contracted labor during maintenance activities, ensuring compliance with safety and company standards.</li> <li >Support initiatives to improve production processes, quality, productivity, safety, and cost reduction in coordination with production personnel.</li> <li >Contribute to the execution of the site Maintenance and Reliability (M&amp;R) Strategy, including PEMM and MIAP tools, and support the implementation of Reliability Engineering and Continuous Improvement (CI) initiatives.</li> <li >Maintain and implement AIB standards and ensure accurate SAP-PM records and updates for all assigned work orders.</li> <li >Provide daily reports on all shift activities and participate in Maintenance forum meetings to share performance, best practices, and challenges.</li> </ul> <h3 >Qualifications and Experience</h3> <ul > <li >Diploma in Mechanical Engineering.</li> <li >Minimum of <strong >2 years of industrial experience</strong>.</li> <li >Hands-on experience in mechanical equipment maintenance, including thermal and hydraulic machines, HVAC systems, rotating and conveying mechanisms, and equipment troubleshooting.</li> </ul> <h3 >Required Skills and Knowledge</h3> <ul > <li >Proficiency in mechanical safety standards, maintenance planning and execution systems, and operating and automation systems.</li> <li >Ability to read and interpret technical drawings.</li> <li >Familiarity with Computerized Maintenance Management Systems (CMMS), SAP, Quality Food Safety (QFS), and Environmental, Health, and Safety (EHS) systems.</li> <li >Strong troubleshooting abilities and an analytical mindset.</li> <li >Demonstrated leadership potential for small projects.</li> <li >Excellent collaboration and communication skills.</li> <li >Flexibility and adaptability in a dynamic work environment.</li> <li >Basic electromechanical work skills and computer literacy (MS Office).</li> </ul> <h3 >PepsiCo Culture and Environment</h3> <p >At PepsiCo, our culture is driven by dynamic and passionate teams that embrace new ideas through a collaborative spirit. We are committed to fostering a diverse workforce by creating an equitable and inclusive space where every individual has a voice. Our vision, pep+, places sustainability and human capital at the core of how we create value and growth, inspiring positive change for both planet and people.</p> <h3 >Join Our Team</h3> <p >Join PepsiCo and contribute to a team dedicated to operational excellence and continuous improvement in the Eastern Region.</p>

<p>The CSK Company announces its need to hire: a Sales Representative</p><p>&nbsp;</p><p>Field of work: ironworks and metal forming for projects.</p><p>&nbsp;</p><p><strong>Job responsibilities:</strong></p><p>&nbsp;</p><p>* Acquire new customers and build long-term relationships.</p><p>* Market and sell the company’s products and services.</p><p>* Prepare price offers and follow up with customers until the contract is completed.</p><p>* Achieve monthly sales targets.</p><p>&nbsp;</p><p><strong>Requirements</strong>:</p><p>&nbsp;</p><p>* Experience in sales, preferably in the iron/contracting sector.</p><p>* Excellent communication and negotiation skills.</p><p>* Ability to work in the field and visit customers.</p><p>* Preference for having a valid driving license. Location: Eastern Province&nbsp;</p>