وظائف مهندس تفتيش هندسي - الاحساء السعودية

Civil Engineer / Civil Inspector, an experienced Civil Inspector Engineer to join the supervising consulting team on a security systems development project in Dammam. The job holder will be responsible for supervising and inspecting civil works on-site and ensuring their execution according to the drawings, specifications, and project requirements. Roles and responsibilities: • Supervise and inspect civil works on-site. • Review civil drawings, IFC drawings, and technical specifications. • Review Method Statements, ITPs, and execution procedures for civil works. • Supervise security fence works, gates, facilities, inspection points, and related civil works. • Inspect foundations, concrete works, and related civil works. • Inspect civil materials arriving on-site and ensure they meet specifications. • Review inspection requests (RFI). • Monitor quality of execution and contractor works. • Identify discrepancies between approved drawings and on-site reality and coordinate redline drawings when needed. • Coordinate with electrical and mechanical engineers and the security systems team. • Participate in inspections, handover, and punch list closure. • Review As-Built drawings and final documents. • Prepare and contribute to weekly and monthly technical reports. Qualifications and experience: • Bachelor's degree in Civil Engineering or equivalent. • Sufficient experience in supervision of execution or civil inspection. • Experience in construction or infrastructure or industrial projects. • Preference for experience in security projects or works of fences, gates, and facilities. • Good knowledge of drawings, specifications, construction methods, and inspection procedures. • Ability to prepare technical reports and follow up contractor works. • Ability to work on-site as an on-site assessor.

Electrical Engineer with experience to join the supervising consulting team in implementing a security systems development project in Dammam. The job holder will be responsible for supervising and inspecting electrical works, reviewing drawings and technical documents, monitoring quality of implementation, coordinating with various disciplines, and participating in tests and commissioning. Tasks and responsibilities: • Supervise electrical works on site and monitor their execution. • Review electrical drawings and IFC drawings and technical specifications. • Review Method Statements and ITPs Installation Procedures for electrical works. • Review electrical materials, equipment, and related technical documents. • Inspect electrical materials and equipment arriving on site and ensure they comply with specifications. • Ensure that executed works conform to drawings, specifications, and project requirements. • Review RFI inspection requests and technical inquiries. • Track discrepancies between approved drawings and site actuals and request and review Redline Drawings when needed. • Coordinate with mechanical, civil, and security systems works. • Participate in inspection, testing, commissioning, and handover activities. • Review As-Built drawings and operation and maintenance documents and related certificates. • Participate in handover activities and close Punch List. • Prepare and contribute to weekly and monthly technical reports. Qualifications and experience: • BSc in Electrical Engineering. • Relevant experience in supervising electrical works implementation. • Experience in building, infrastructure, industrial, or security systems projects. • Good knowledge of drawings, specifications, installation, inspection, testing, and commissioning works. • Knowledge of related electrical codes and standards. • Experience working at a consulting office or supervising projects is a plus. • Ability to work as a site resident engineer.

<p>A client of ours is seeking an experienced <strong>Quality Control Engineer (QC Engineer)</strong> to join the team and support quality assurance and control activities in electrical network projects and infrastructure.</p><p><strong>Requirements:</strong></p><ul><li>Bachelor’s degree in Electrical or Civil Engineering.</li><li>Minimum 3 years of experience in Quality Control and Assurance (QC/QA).</li><li>Hands-on experience in electrical network and infrastructure projects.</li><li>Practical experience with pressure equipment and pressure testing.</li><li>Valid QC/QA certification from the Saudi Electricity Company (SEC) — mandatory.</li><li>Valid NEBOSH and OSHA certificates — mandatory.</li><li>Willingness to work in the Eastern Region, Saudi Arabia.</li></ul><p><strong>Salary:</strong> Starting from 10,000 SAR, negotiable based on experience and qualifications.</p>

Responsibilities<br>Implement corrosion management program and on-stream monitoring. Troubleshoot and provide technical support for corrosion and assets integrity management. Conduct risk-based inspections based on API-580 methodology. Review and approve recommended solutions for coating failures and cathodic protection. Participate in HAZOP (Hazard and Operability Study) review sessions and ensure that all issues are addressed. Manage the water treatment program and recommend solutions to overcome challenges. Review and support proper operations within integrity operating windows (IOW). Review design packages and validate materials selection based on current codes and standards. Validate corrosion controls, corrosion loops, and corrosion damage mechanisms frequently. Assess feed composition changes and approve recommended solutions to assure asset integrity. Develop the scope and description of technology items and lead field implementation. Develop and transfer knowledge about the use of coating, cathodic protection, corrosion inhibitors, and other corrosion controls and best practices.<br>Requirements<br>Willing to permanently relocate at Jubail, Saudi Arabia. Hold a Bachelor's degree in engineering, preferably in mechanical engineering or chemical engineering Possess a minimum of 12 years of experience, with a strong preference for 15 years or more, in processing in the Oil/Gas industry, material science and metrology, different NDT (Non-Destructive Testing) technology and their applications, and knowledge in the engineering aspect of welding. Preferably, experienced in refineries corrosion/ damage mechanisms and challenges. Have knowledge of international standards and codes, particularly NACE, ASME, API, and ASTM, with a focus on inspection and corrosion standards such as API-571, API-580, API-570, API 584 and API-510. Hold a valid NACE Specialist Certification or NACESenior Corrosion Technologist certification, or a combination of NACE Corrosion Technologist, API-571, and NACE CP (Cathodic Protection) level |I certifications.

Summary: The Senior QA/QC Engineer is responsible for leading and overseeing all Quality Assurance, Quality Control, inspection, testing, and calibration activities within the valve manufacturing process. The role ensures compliance with applicable quality management systems, customer specifications, API standards, ISO requirements, and industry regulations. The incumbent will drive continuous improvement initiatives, supervise inspection personnel, manage audits, analyze quality performance data, and maintain accurate quality records to ensure product conformity and customer satisfaction. Key Responsibilities Quality Management & Compliance Maintain, implement, and continuously improve the Quality Management System (QMS) in accordance with ISO 9001, API Spec Q1, and applicable customer requirements. Ensure compliance with API product standards, ASME codes, company procedures, and industry best practices. Act as a focal point for quality-related matters and support external audits, customer inspections, and certification assessments. Ensure adherence to quality system procedures and API product requirements across all manufacturing processes. Inspection, Testing & Calibration Lead and supervise all receiving, in-process, and final inspection activities. Plan and allocate inspection resources, personnel, and schedules to meet production requirements. Establish, review, and enhance Inspection and Test Plans (ITPs), quality control instructions, and quality procedures. Oversee the control, maintenance, verification, and calibration of inspection gauges, measuring instruments, and testing equipment. Ensure calibration records and inspection documentation are maintained in accordance with ISO and company requirements. Audit & Continuous Improvement Develop and maintain internal quality audit schedules. Conduct internal audits and support customer and third-party audits. Prepare audit reports, monitor corrective and preventive actions (CAPA), and ensure effective closure of audit findings. Analyze quality data, identify trends, and recommend improvement actions to enhance product quality and process efficiency. Coordinate with the Management Representative (MR) to implement preventive and corrective actions. Cross-Functional Coordination Collaborate closely with Engineering, Manufacturing, Production Planning, Commercial, and Procurement departments to define inspection requirements. Review customer specifications, contract requirements, quality plans, and applicable standards to ensure compliance throughout production. Support customer complaints investigations, root cause analysis, and implementation of corrective actions. Team Leadership Lead and mentor QA/QC inspectors and quality personnel. Establish SMART objectives for the inspection team and monitor performance against established targets. Promote a quality-focused culture and continuous improvement within the organization. Technical Requirements Strong knowledge of Quality Management Systems, including:ISO 9001 (Latest Edition) API Spec Q1 (Latest Edition) Thorough understanding of quality requirements related to valve manufacturing and oil & gas applications. Sound knowledge of API product standards, ASME codes, and other relevant industry standards. Experience in inspection, testing, calibration, and quality assurance methodologies. Knowledge of Non-Destructive Testing (NDT) techniques, including:Dye Penetrant Testing (DPT/PT) Magnetic Particle Testing (MPT/MT) Radiographic Film Interpretation (RTFI) Preferred Certifications ISO 9001 Lead Auditor Certification (Latest Edition). API Q1 Lead Auditor Certification. ASNT SNT-TC-1A Level II or ASNT CP-189 Level II certification in applicable NDT methods. Internal Auditor Certification. Calibration Certification. API Product Certifications (API 6D, API 600, API 602, API 607, API 608, API 609, API 598, etc.) are an added advantage. Qualifications & Experience Option 1Bachelor's Degree in Mechanical Engineering or equivalent, with:Minimum 10 years of experience in Quality Assurance, Quality Control, and Inspection. Minimum 5 years of experience in valve manufacturing for Oil & Gas applications. Option 2Diploma in Mechanical Engineering or equivalent, with:Minimum 13 years of experience in Quality Assurance, Quality Control, and Inspection. Minimum 7 years of experience in valve manufacturing for Oil & Gas applications. Preferred Experience Experience with a reputable valve manufacturing company. Experience working on projects for Saudi Aramco or other major oil & gas operators. Proven track record in managing customer inspections, audits, and quality compliance requirements. Skills & Competencies Strong leadership and team management skills. Excellent analytical and problem-solving abilities. Effective communication and reporting skills. Attention to detail and commitment to quality excellence. Ability to interpret engineering drawings, specifications, and quality requirements. Proficiency in quality reporting and documentation systems. Fluent in written and spoken English.

Site Engineer Eastern Province, Saudi Arabia · Full-time · On-site Two positions available<br>About the role We are hiring two Site Engineers to lead field execution across a diversified portfolio of commercial, industrial, and residential facilities — showrooms, factories, offices, warehouses, and staff accommodation. This is a dual-function role. Each Site Engineer manages two Foremen and their trade crews, and handles fit-out and renovation projects alongside routine and emergency maintenance, interchangeably. There is no separate maintenance team — the same crews flex between planned project work and reactive callouts, allocated daily through a central dispatch desk. The role reports to the Operations Manager and draws on the Engineering & Consulting department for technical guidance. It suits an engineer who is genuinely field-based rather than office-based, comfortable switching between a scheduled fit-out programme and an emergency breakdown in the same day, and able to hold a multi-national trade workforce to standard.<br>What you will do Site supervision and execution· Supervise daily execution of fit-out, renovation, and maintenance work across assigned sites· Coordinate two Foremen and their trade crews, ensuring work is completed safely, on time, and to specification· Conduct daily site inspections to verify workmanship, material usage, and compliance with drawings and specifications· Resolve on-site technical issues; escalate complex problems to the Operations Manager or Engineering Project coordination· Assist in preparing project plans, schedules, and material requirements· Track progress on assigned sites and report status, delays, and issues· Coordinate material deliveries, equipment needs, and subcontractor activities· Maintain project documentation — daily logs, progress photos, punch lists, handover records Maintenance oversight· Oversee routine and emergency maintenance assigned through the dispatch desk· Ensure work orders are completed within agreed response and resolution times· Conduct post-completion inspections before sign-off· Report recurring issues and recommend preventive action Workforce coordination· Manage daily crew assignments in coordination with the dispatch desk· Monitor attendance, productivity, and overtime of assigned Foremen and crews· Provide on-the-job coaching and technical guidance· Report performance issues and recommend corrective action Safety and compliance· Enforce site safety standards across all assigned work· Conduct toolbox talks and pre-work safety briefings· Report and document incidents; participate in investigations<br>What we are looking for· Bachelor's degree in Civil Engineering, or a diploma in Construction Management with additional experience· 5 to 8 years in construction site supervision, fit-out, or facility maintenance· Experience supervising multi-trade crews — civil, electrical, plumbing, and finishing trades· Ability to read and interpret engineering drawings, specifications, and BOQs· Familiarity with work order systems and preventive maintenance scheduling· GCC experience preferred· English required; Arabic an advantage; Hindi or Urdu useful for workforce communication<br>How you will be measured· Assigned projects and maintenance tasks completed on time and to standard· Accuracy and timeliness of daily site reporting· Trade crew utilization on assigned sites· Zero safety incidents· Rework rate on completed work

Role Summary: The Mechanical Quality Engineer (Piping, Welding, Coating & NDT) is responsible for assuring and controlling the quality of piping fabrication and installation, welded joints, protective coating systems, and non-destructive testing activities for the JESCO / Arcelor Mittal Tubular Products Al-Jubail Heat Treatment and Finishing Line Project. The role provides owner-side surveillance of EPC contractors, subcontractors, vendors, and third-party inspection agencies from material receipt and fabrication through erection, testing, pre-commissioning, turnover, and final dossier close-out. The incumbent ensures compliance with approved project specifications, drawings, Inspection and Test Plans, welding and coating procedures, applicable Saudi requirements, and relevant ASME, API, ASTM, AWS, ISO, SSPC/AMPP, and ASNT standards.<br>Job Duties & Responsibilities:Review and approve contractor quality documents, including Project Quality Plans, Inspection and Test Plans, method statements, field inspection checklists, welding procedure specifications and qualification records, NDT procedures, coating procedures, pressure-test packages, and turnover dossiers. Perform surveillance and inspection of shop and field piping activities, including material receiving, identification and traceability, storage and preservation, fit-up, joint preparation, welding, supports, flange alignment, bolt tightening, cleanliness, reinstatement, and system completion. Verify piping materials, fittings, flanges, valves, gaskets, welding consumables, and coating materials against approved drawings, specifications, purchase orders, material requisitions, MTCs, heat numbers, and positive material identification requirements. Witness and verify welder and welding-operator qualifications, WPS/PQR compliance, welding consumable control, preheat and inter pass temperature, heat input, joint sequencing, visual inspection, weld repair, and post-weld heat treatment activities where applicable. Coordinate and monitor NDT activities, including VT, PT, MT, UT, RT, and advanced methods when specified; verify technician certification, equipment calibration, technique sheets, examination coverage, acceptance criteria, reports, film or digital-image quality, and repair-cycle closure. Inspect surface preparation and coating application, including environmental conditions, abrasive and coating batch control, surface cleanliness and profile, stripe coating, wet and dry film thickness, holiday testing, adhesion testing, curing, repair, and final acceptance in accordance with the approved coating system. Witness piping pressure and leak testing, line flushing or blowing, drying, chemical cleaning where applicable, valve testing, punch-list clearance, and reinstatement; confirm calibrated test instruments, test boundaries, temporary supports, safety controls, and complete test records. Review isometric drawings, P&IDs, line lists, plot plans, weld maps, spool drawings, support details, vendor drawings, specifications, and approved technical queries to confirm construction and inspection compliance. Raise inspection observations and Non-Conformance Reports for deviations; support root-cause analysis, corrective and preventive actions, concession or repair review, verification of implementation, and timely close-out. Maintain inspection status, weld and NDT traceability, coating records, NCR and punch-list logs, quality KPIs, and weekly progress reports; identify recurring defects and recommend preventive improvement actions. Coordinate with Project Management, Engineering, Construction, HSE, Operations, EPC contractors, vendors, authorized inspectors, and third-party agencies to resolve quality issues without compromising safety, code compliance, or project schedule. Support mechanical completion, system handover, pre-commissioning, and final quality dossier review, ensuring all records are complete, legible, traceable, approved, and aligned with the project turnover index.<br>Education & Experience:Bachelor’s degree in mechanical engineering or equivalent discipline Minimum 8-10 years of QA/QC experience in piping, welding, coating, and NDT for industrial construction, steel, oil and gas, petrochemical, power, or process-plant projects. At least 3 years in an owner, client, PMC, or lead site-quality role supervising EPC contractors, subcontractors, and third-party inspection agencies. Demonstrated field experience with carbon steel, stainless steel, and alloy-steel piping fabrication and installation, welding control, NDT coordination, coating inspection, pressure testing, and turnover documentation. Experience reviewing and implementing ITPs, WPS/PQRs, welder qualifications, NDT procedures, coating procedures, inspection requests, test packs, NCRs, punch lists, and final manufacturing or construction dossiers. Experience on Heat Treatment and Finishing Line, steelmaking, pipe manufacturing, or comparable heavy-industrial projects is preferred; Saudi Arabia or GCC project experience is an advantage.<br>Skills:Excellent technical knowledge and quality-control skills Strong leadership and contractor-management abilities Effective communication, reporting, and coordination skills Strong analytical, problem-solving, and decision-making abilities Good planning, organization, teamwork, and time-management skills

MEP Engineer – Facilities Management Advisory Location: King Salman Energy Park (SPARK), Eastern Province, Saudi Arabia Employment Type: Full-time<br>Position Summary King Salman Energy Park (SPARK) is a premier industrial ecosystem supporting the region’s energy and manufacturing sectors. As part of SPARK’s commitment to operational excellence and sustainable infrastructure, the MEP Engineer plays a key role in ensuring the reliability, efficiency, and compliance of mechanical, electrical, and plumbing systems across the park. This position will support the inspection, maintenance, and performance optimization of MEP systems within both building and infrastructure assets, including tenant facilities, substations, pumping stations, utility corridors, and common areas. The MEP Engineer will work closely with senior engineers, FM teams, and service providers to maintain high operational standards and system integrity.<br>Key Responsibilities1. MEP Systems Support (Infrastructure & Building Assets) Monitor the performance and operational status of MEP systems including HVAC, water supply, drainage, fire protection, lighting, power distribution, and pumping stations. Conduct site inspections and support maintenance activities for MEP systems across both infrastructure and building facilities. Participate in the troubleshooting, fault analysis, and resolution of MEP-related technical issues. Support the review of method statements, risk assessments, and maintenance procedures submitted by contractors. Ensure building MEP systems are maintained according to required specifications, tenant guidelines, and health and safety standards. Support the technical review and commissioning of new MEP installations or refurbished systems.2. Preventive & Corrective Maintenance Coordination Assist in implementing preventive and corrective maintenance schedules for MEP systems in coordination with O&M contractors. Conduct field verification of maintenance activities to ensure alignment with SLAs and technical standards. Maintain records of completed works, service reports, and contractor performance. Monitor spare parts usage and support timely identification of required materials. Coordinate with FM teams to minimize downtime and ensure timely resolution of urgent issues.3. Utilities Performance Monitoring Assist in tracking consumption data for utilities such as electricity, water, and chilled water across MEP systems. Identify abnormal usage trends and report potential inefficiencies or faults. Support the implementation of energy efficiency measures and corrective actions. Work with sustainability teams to improve performance through data-driven insights and technical adjustments.4. Compliance & Safety Ensure all MEP activities are performed in compliance with local regulations, SPARK standards, and international codes (e.g., SBC, ASHRAE, NFPA, NEC, IEC). Participate in safety inspections and enforce compliance with HSE protocols during site activities. Assist with documentation and audits related to safety and regulatory compliance.5. Contractor & Vendor Coordination Liaise with external contractors and vendors to support ongoing MEP maintenance works and service delivery. Monitor contractor performance and ensure compliance with contractual obligations, timelines, and quality expectations. Provide site-level coordination during minor works, equipment replacements, and system upgrades.6. Technical Documentation & Reporting Maintain up-to-date MEP documentation, including drawings, asset registers, test reports, and maintenance logs. Assist in preparing technical reports, condition assessments, and recommendations for system improvements. Support the integration of MEP asset data into CAFM/CMMS platforms for centralized monitoring and tracking.<br>Qualifications & Experience Bachelor’s degree in Mechanical or Electrical Engineering (or related field).4–7 years of experience in MEP operations, maintenance, or technical support—preferably in industrial parks, large-scale developments, or infrastructure projects. Strong knowledge of MEP systems for both buildings and infrastructure (e.g., utility corridors, substations, pump stations). Familiarity with international and local codes and standards (SBC, ASHRAE, NFPA, NEC, IEC). Experience using CAFM/CMMS platforms for asset and work order management is preferred. Previous experience in the GCC region is an advantage.<br>Key Skills & Attributes Technical Proficiency: Solid understanding of MEP systems, their operation, and typical fault conditions. Problem Solving: Able to respond to system failures and maintenance issues quickly and efficiently. Attention to Detail: Strong focus on system compliance, documentation accuracy, and service quality. Teamwork: Able to collaborate with internal teams, contractors, and stakeholders to support joint goals. Communication: Clear reporting and coordination with field teams, vendors, and engineering supervisors. Safety Awareness: Strong commitment to HSE and regulatory compliance during operations and inspections.<br>Reporting Line Reports To:Senior MEP Engineer<br>Collaborates With Internal Stakeholders:Facilities Management Utilities and Sustainability Teams Engineering and Projects HSE and Compliance Procurement and Vendor Management External Stakeholders:O&M contractors and service providers Engineering consultants Utility suppliers Regulatory bodies (for inspections and compliance matters)<br>All interested applicants can also email their CVs to careers.escl@dhowsolutions.com with a subject line of “MEP Engineer-Saudi National” mentioning their availability.

We Are Hiring – Electrical Engineer???? Location: Dhahran, Saudi Arabia???? Experience: 0–3 years We are looking for an Electrical Engineer to support electrical engineering projects related to IT and communication facilities across Saudi Arabia. Key Responsibilities:Prepare and support electrical engineering designs for IT and communication facilities. Work with DC power systems including UPS, rectifiers, inverters, batteries, and Solar PV systems. Support AC backup systems including diesel generators, ATS, and MTS. Perform electrical load assessments, engineering calculations, and equipment sizing. Conduct field surveys and support technical issue resolution. Prepare material specifications and equipment testing procedures. Support inspections, testing, commissioning, and project activities. Requirements:Bachelor’s degree in Electrical Engineering.0–3 years of experience in electrical engineering. Knowledge of electrical power and backup systems. Strong communication and interpersonal skills. Project management or leadership exposure is an advantage. PMP, FE, or other relevant certifications are a plus.???? To Apply:Please send your updated CV to:recruitment.ksa@ipsl-global.comSubject: Electrical Engineer – Dhahran

At Air Products, we reimagine what’s possible. By tapping into the motivation of our people and our collective experience, we create the ideas and innovations that drive us forward. When we come together – where every voice is heard and everyone knows they belong and matter – we create solutions that launch people into space, support lifesaving care in hospitals, and enable the construction of groundbreaking, world scale production facilities.<br><br>Reimagine What’s Possible <br><br>Purpose<br><br>The Senior Process Controls Engineer works closely with Maintenance, Operations, Engineering and Technical Management to coordinate, organize and execute process controls activities for preventive and corrective maintenance. The role aims to reduce maintenance-related costs while improving plant reliability and availability in line with business needs across Air Separation Units (ASU), Steam Methane Reformers (HYCO), CO2 capture, utilities and associated ancillary equipment. The role may also support joint venture partners, equipment sales customers and new customers as required by BHIG.<br><br>Nature & Scope<br><br>Reporting to the Engineering Manager, the Senior Process Controls Engineer provides day-to-day technical support to maintain the safe, reliable and efficient operation of process control systems and low-voltage instrumentation and controls equipment. The role plans and executes preventive and corrective maintenance activities in coordination with Maintenance Management, Operations and Engineering and works closely with internal and external resources to ensure safe and reliable execution.<br><br>The facilities cover multiple technologies, including ASU, HYCO, CO2 production and H2 mobility. The incumbent routinely interfaces with Operations, Maintenance and Instrument Technicians to provide troubleshooting support, work instructions and technical guidance for process control systems. The position requires teamwork, clear communication, organization, change management, work-process optimization, planning, leadership, and hands-on technical capability across related disciplines.<br><br>Safety<br><br>Principal Accountabilities<br><br> Maintain a safe work environment and demonstrate visible leadership in BHIG and industry safe-work processes to prevent injuries. Ensure appropriate documentation is maintained for safety-related activities. Provide technical support and safety leadership for Management of Change (MOC), Operational/Process Hazard Reviews (OPHR), Safety Integrity Level (SIL) assessments and other process-safety initiatives. Consult BHIG and shareholder process safety specialists as required. Support the implementation, audit and revalidation of Critical Safety Systems (CSS), Safety Instrumented Systems (SIS) and Safety Instrumented Functions (SIF), including the applicable lifecycle documentation and testing requirements.<br><br>Technical<br><br> Provide technical solutions and lead execution planning for SAP PM activities covering plant instrumentation, analyzers, gas chromatography and process control systems, including DCS, local PLCs and associated control loops. Maintain long-term instrumentation and controls plans covering calibration, spare-parts management, control logic, programming, graphics changes, operational changes, system migration and backup management. Perform SIL assessments and verification and support SIS and SIF lifecycle activities. Provide engineering support and prepare punch lists during plant construction and commissioning. Ensure timely closure of punch items, accurate document control and compliance with quality assurance requirements. Interface with Process Engineering to identify gaps and develop improved operating and control strategies to achieve productivity targets. Develop tracking programs and metrics for plant optimization, efficiency and controller on-stream performance. Interface with Advanced Controls resources to define DCS interface requirements and jointly design, implement and test the required interfaces. Support plant productivity and improvement projects, including instrument specification, control-system configuration, detailed cable and wiring design, and preparation of work packages for contractor bidding and installation. Maintain current engineering specifications and sizing calculations for procurement of instrumentation and controls equipment, including control valves, flowmeters, inline devices, transmitters and analyzers. Provide engineering input to develop and maintain instrumentation and controls standards, procedures, best practices, inspection contracts and contractor-selection guidelines. Lead and provide technical support for new installations, existing plant modifications, ongoing operations, continuous improvement and maintenance activities across BHIG facilities. Ensure compliance with legal requirements and BHIG safety and technical standards. Provide technical support for BHIG equipment-sales activities, existing plant modifications, operations, continuous improvement and maintenance services for customers in the Region through site visits, remote support or the Process Intelligence Center. Provide technical leadership for investigations and Root Cause Analysis (RCA) to identify and implement sustainable corrective and preventive actions.<br><br>Operations<br><br> Provide process-controls engineering support to operate ASU, HYCO, CO2 and H2 mobility facilities safely and reliably while meeting customer requirements for product quality, supply flexibility and contractual compliance. Ensure BHIG standards and applicable shareholder best practices for EH&S, productivity, reliability, quality and customer service are met. Provide technical support to commissioning teams during commissioning, start-up and troubleshooting activities and participate in Operations training before plant commissioning. Assist Operations in maintaining accurate document control and monitoring quality assurance initiatives. Maintain alignment with Plant Managers, Site Leadership, and the Business Area on asset-management opportunities and commercial priorities. Provide technical support for turnarounds and major maintenance activities. Establish and maintain compliance with applicable company requirements, local regulations, technology standards and codes consistent with BHIG operational objectives. Participate in technical reviews, equipment design, installation, operation and optimization, including validation, Mechanical Integrity, Management of Change and procedure development and implementation.<br><br>Repair & Maintenance<br><br> Establish and maintain close working relationships with Process Engineering, Operations and Maintenance personnel to continuously monitor and evaluate plant performance and process-control systems and equipment. Develop and implement comprehensive maintenance plans for process-control systems and equipment and provide technical guidance and detailed instructions to schedule, execute and monitor plan compliance. Develop engineering solutions for repetitive failures and other conditions that adversely affect plant operations. Provide engineering support and participate in or lead incident investigations and RCA activities. Identify and implement sustainable corrective actions. Guide the Maintenance team in setting spare-parts inventory levels, managing quality and developing inventory strategies.<br><br>Project Management / Budget<br><br> Apply appropriate project-development and project-management practices, including scope, budget, schedule, execution strategy, risk planning and cost reporting, for projects and turnaround activities. Provide engineering support in developing the annual budget for process-control systems and equipment maintenance, repair and system upgrades.<br><br>Professional<br><br> Lead by example and promote teamwork through open communication, active listening, and timely issue resolution. Drive continuous improvement in safety performance, reliability, and cost of quality. Build and maintain positive working relationships with internal and external stakeholders. Support, mentor and develop instrument technicians and less-experienced engineers.<br><br>Minimum Requirements And Qualifications<br><br>Education & Experience<br><br> Bachelor's degree in Instrumentation, Control, Electrical, Electronics or related engineering discipline. Minimum 10 years of relevant process automation experience in chemical, refinery or gas-plant maintenance, inspection or engineering. Demonstrated hands-on plant experience in troubleshooting, maintenance, commissioning and operation of instrumentation and process-control systems. Experience with Air Separation, HYCO, and gasification process systems is preferred.<br><br>Technical Skills<br><br> Troubleshooting and maintenance-level knowledge of Siemens PCS 7 Distributed Control Systems, including specifications, configuration and programming using PCS 7, STEP 7 and Win CC. Experience with other control platforms is an advantage. Demonstrated ability to configure, calibrate, troubleshoot and repair process instrumentation for temperature, pressure, flow, voltage and other process variables. Working knowledge of industrial computer networks and demonstrated logical, systematic troubleshooting and problem-solving capability. Knowledge of SIL, SIS, SIF and Supervisory Control and Data Acquisition (SCADA) principles and applications. Knowledge of applicable oil, gas and refining industry codes and standards, including API, ISA, NEC/IEC, NFPA and ASME. Knowledge of Saudi Aramco standards and working practices is preferred. Knowledge of process safety, occupational health and applicable local environmental requirements. Proficiency in Microsoft Office and relevant engineering, maintenance and data-historian applications.<br><br>Leadership & Behavioral Competencies<br><br> Strong commitment to employee involvement, teamwork, diversity, and inclusion. Ability to communicate effectively with management, Operations, Maintenance, customers and contractors. Proficiency in spoken and written English is required; Arabic language capability is an advantage. Demonstrated leadership, organizational, computer, interpersonal and written and verbal communication skills. Confident, self-motivated, results oriented and committed to continuous improvement. Formal training and experience in Six Sigma and continuous improvement tools is a plus.<br><br>Founded in 1940, Air Products is a world-leading industrial gases company and has a proud history of innovation, operational excellence, with an unwavering commitment to safety and environmental stewardship. Working together, we are taking our passion and diverse backgrounds forward to reimagine what’s possible and generate a cleaner future for our customers, our communities, and the world.

<div dir="rtl"><h3 >نبذة عن الدور</h3> <p >تعلن شركة زومان محمد الهاجري وشركاه للمقاولات عن حاجتها لتوظيف <strong >مهندس سلامة وصحة مهنية</strong> للعمل بدوام كامل في مدينة الأحساء بالمنطقة الشرقية. يهدف هذا الدور إلى الإشراف على إعداد وتطوير أسس وإجراءات السلامة والصحة المهنية في مواقع العمل، وتحديد الأخطار المحتملة، وضمان توفير واستخدام مستلزمات السلامة، بالإضافة إلى إعداد الوثائق والتقارير المتخصصة بنتائج الأعمال. تتطلب الوظيفة خبرة تتراوح من 0 إلى 1 سنة.</p> <h3 >المهام والمسؤوليات الرئيسية</h3> <ul > <li >إعداد وتطوير أسس وإجراءات وتعليمات السلامة والصحة المهنية، بما في ذلك سياسات السلامة وتعليمات العمل الآمن والإخلاء ولجان السلامة وسجلات الفحص الطبي، ومتابعة اعتمادها والالتزام بها.</li> <li >تحديد مكامن الأخطار الميكانيكية والكهربائية والكيميائية في موقع العمل ووضع الإشارات والملصقات التحذيرية المناسبة.</li> <li >إعداد قوائم ببنود وكميات ومواصفات معدات ومستلزمات السلامة والصحة المهنية، ومتابعة توفيرها والتزام العاملين باستخدامها.</li> <li >تطوير أساليب وإجراءات العمل ومواكبة التطورات التقنية في مجال السلامة والصحة المهنية.</li> <li >إعداد الوثائق والتقارير المتخصصة المتعلقة بالأعمال والمشروعات الهندسية ونسب تقدمها، وعرضها وتوضيحها وحفظها في قاعدة البيانات الخاصة بها وفقاً للسياسات والإجراءات المعتمدة.</li> </ul> <h3 >متطلبات الخبرة</h3> <p >يتطلب هذا الدور خبرة عملية تتراوح من <strong >0 إلى 1 سنة</strong> في مجال السلامة والصحة المهنية أو في مجال هندسي ذي صلة.</p> <h3 >المعرفة والقدرات الأساسية</h3> <ul > <li >فهم شامل لأسس وقواعد وإجراءات السلامة والصحة المهنية.</li> <li >القدرة على تحديد وتقييم الأخطار المهنية وتطوير إجراءات الوقاية منها.</li> <li >مهارات قوية في إعداد الوثائق والتقارير الفنية وحفظها.</li> <li >القدرة على متابعة التطورات التقنية وتطبيقها لتحسين إجراءات العمل.</li> </ul> <h3 >المساهمة في بيئة العمل</h3> <p >سيلعب شاغل الوظيفة دوراً محورياً في تعزيز ثقافة السلامة والصحة المهنية داخل الشركة، من خلال تطبيق أفضل الممارسات وضمان بيئة عمل آمنة ومطابقة للمعايير. يتطلب الدور التزاماً بالدقة والحرص على التفاصيل في جميع المهام الموكلة.</p> <h3 >معلومات إضافية</h3> <p >الراتب لهذه الوظيفة <strong >غير معلن</strong>. ندعو المهتمين الذين يستوفون المتطلبات المذكورة أعلاه إلى تقديم طلباتهم.</p></div>

Company Description Binnowiran For Trading & Cont. Co. is a diversified contracting and trading company operating in the marine and industrial sectors in Khafji and surrounding areas. The company supports clients with reliable technical services, marine craft operations, and maintenance solutions that enable safe and efficient work on the water. Binnowiran focuses on meeting client specifications, adhering to applicable safety and regulatory standards, and delivering projects on schedule. Team members collaborate in a practical, hands-on environment where technical expertise and proactive problem-solving are valued. Academic & Professional Qualifications Degree & License: Bachelor of Technology Degree in Marine Engineering + valid Chief Marine Engineer License. Experience:Minimum 10 years of overseas experience.experience in Ships Dry Dock . Language: Good command of the English language, with the ability to read and write technical documentation fluently. Duties & Responsibilities (Marine Engineering Team)1. Maintenance, Repair & Dry Docking Plan, organize, and supervise vessel repairs, inspections, and dry dockings, ensuring the preparation of comprehensive final technical reports. Investigate and analyze technical defects, implementing timely preventive and corrective measures. Conduct regular vessel visits and physical condition assessments to ensure compliance, proper maintenance, and prompt defect resolution. Perform sea trials and technical inspections for owned and chartered vessels as required.2. Fleet Technical Support & Operations Supervise and provide expert technical advice and support to Chief Engineers on board. Review daily and weekly reports submitted by company-owned vessels, taking immediate action when necessary. Oversee spare parts consumption, maintain an updated inventory of all spare parts, and create requisitions for routine maintenance and dry docking.3. Compliance, Certification & Regulatory Management Monitor the validity of all vessel statutory and classification certificates, liaising with classification societies, flag states, and external authorities for timely renewals prior to expiration. Monitor vessel operational permits and documents, coordinating with the concerned authorities for renewals ahead of due dates.4. Crew Evaluation & Budgeting Review and evaluate crew members' technical qualifications prior to joining and following the completion of their service contracts. Draw up, manage, and monitor the annual maintenance and operational budget.

We are looking for a Mechanical Engineer to join our Projects in Dammam<br>Key Responsibilities<br>Supervise preventive and corrective maintenance of HVAC, ventilation, plumbing, drainage, water supply, sewage, fire-fighting, LPG, and water treatment systems. Monitor daily mechanical operations and troubleshoot equipment faults. Supervise mechanical technicians and service contractors. Ensure compliance with mechanical codes, safety regulations, and Civil Defense requirements. Coordinate mechanical shutdowns with mall operations and tenants. Monitor HVAC performance and support energy-efficiency initiatives. Conduct inspections and condition assessments of mechanical equipment. Support CAPEX projects, renovations, and tenant fit-out activities. Prepare maintenance and KPI reports. Manage spare-parts requirements and ensure maintenance activities are updated in CAFM/CMMS. Participate in emergency response, incident investigations, and troubleshooting activities. Support 24/7 mall operations, including emergency call-outs when required.<br>Requirements Bachelor’s Degree in Mechanical Engineering.5–7 years of experience in Facilities Management. Experience in shopping malls, commercial buildings, hospitals, or mixed-use developments. Strong hands-on experience with:Chillers, AHUs, FCUs, Package Units & Split ACsPlumbing & Drainage Systems Water Supply & Booster Pumps Sewage & Storm Water Systems Fire Fighting & Fire Pump Systems LPG Systems Ventilation & Exhaust Systems Preventive & Corrective Maintenance Contractor & Service Provider Management Good English communication and MS Office skills. Experience with CMMS/CAFM systems is preferred. Knowledge of Saudi mechanical codes and Civil Defense requirements is preferred. Experience with BMS integration, D365, CAFM/CMMS, and energy-efficiency initiatives is an advantage. Ability to read mechanical and electrical drawings.

<p>Job Overview</p><p>We are seeking a detail-oriented and motivated Construction Engineer to join our civil engineering team in Saudi Arabia. This entry-level position offers hands-on experience across diverse construction projects, focusing on the planning, coordination, and execution of civil works. The successful candidate will support project managers, site engineers, and field crews while developing the technical competencies necessary to advance within a dynamic, safety-conscious environment.</p><p>About the Company</p><p>Our company is a leading player in the civil construction sector, renowned for delivering complex infrastructure, commercial, and industrial projects. We foster an innovation-driven culture that emphasizes quality, safety, and sustainability. This is an excellent opportunity to grow within a collaborative team that values proactive problem-solving and professional development.</p><p>Key Responsibilities and Duties</p><ul><li>Assist in the planning, scheduling, and coordination of civil construction activities on site.</li><li>Monitor construction work to ensure compliance with design specifications, standards, and safety regulations.</li><li>Review drawings, specifications, and submittals; communicate discrepancies to senior engineers for resolution.</li><li>Assist in quantity takeoffs, material testing coordination, and quality assurance documentation.</li><li>Support site safety programs, conduct toolbox talks, and ensure adherence to health and safety practices.</li><li>Coordinate with subcontractors, suppliers, and internal teams to ensure timely delivery of materials and equipment.</li><li>Record daily progress, photos, and field reports; participate in progress meetings and reporting activities.</li><li>Assist with inspections, testing procedures, and commissioning activities under supervision.</li><li>Contribute to problem-solving efforts on site, providing practical engineering solutions as needed.</li></ul><p>Qualifications and Requirements</p><ul><li>Bachelor’s degree in Civil Engineering or a closely related field (Undergraduate/Entry-level).</li><li>Recent graduates or trainees with a strong academic record are encouraged to apply.</li><li>Basic understanding of civil construction practices, materials, and structural concepts.</li><li>Willingness to work on-site in a demanding environment and travel to project locations as required.</li><li>Proficiency in AutoCAD or similar design/drafting software; familiarity with project management tools is a plus.</li><li>Strong analytical, organizational, and communication skills in English (Arabic language skills are a plus).</li><li>Commitment to safety, quality, and continuous learning; ability to work under supervision and collaboratively as part of a team.</li></ul><p>Required Skills</p><ul><li>Attention to detail and accuracy in measurements and documentation</li><li>Effective verbal and written communication</li><li>Basic knowledge of construction materials, methods, and testing procedures</li><li>Problem-solving and critical thinking abilities</li><li>Time management and ability to prioritize multiple tasks</li><li>Team collaboration and adaptability in a fast-paced project environment</li></ul><p>Benefits and Perks</p><ul><li>Competitive salary and benefits package</li><li>Comprehensive training and mentorship from experienced professionals</li><li>Opportunities for career progression within a growing organization</li><li>Health insurance and retirement plan options</li><li>Paid leave and holiday entitlement in line with local regulations</li><li>Support for professional certifications and continuing education</li></ul>

Overall Purpose of Role To lead and coordinate day to day construction execution on site, acting as the right hand to the Construction Manager and ensuring pipeline and associated facility works are delivered safely, on schedule, and in full accordance with approved engineering drawings, specifications, and Saudi Aramco standards. The role supports the Construction Manager in translating project plans into field execution, providing technical and supervisory oversight across all onshore construction work fronts including ROW works, trenching, welding, lifting, lowering-in, hydrotesting, tie-ins, and SIMOPS, while driving productivity, quality, and safety performance.<br>Primary Responsibilities, Authorities & Accountabilities:<br>Construction Execution & Site Supervision Plan, sequence, and supervise daily construction activities across all work fronts to meet project schedule targets. Act as the Construction Manager's primary site representative, ensuring instructions and priorities are executed by subcontractors and crews. Coordinate work-front resources (manpower, equipment, materials) to maintain progress and resolve site bottlenecks. Ensure construction activities are executed per approved IFC drawings, specifications, and method statements.<br>Saudi Aramco & Client Interface Liaise directly with Aramco site PMT, inspection, and QA/QC teams on construction progress and technical queries. Represent the Construction Manager in site coordination meetings, progress walks, and technical clarifications. Support timely resolution of client comments, NCRs, and field technical queries.<br>Quality, HSE & Permit Compliance Ensure all construction work is carried out under valid Permit to Work and in full compliance with HSE requirements. Enforce quality control checkpoints and hold points per the project Inspection & Test Plan (ITP). Support HSE and QC teams in inspections, audits, and closure of observations.<br>Planning, Progress & Reporting Monitor daily/weekly progress against the project schedule and flag deviations to the Construction Manager. Prepare daily construction reports, progress updates, and productivity data. Support look-ahead planning and resource forecasting with the Planning team.<br>Subcontractor & Workforce Management Supervise and direct subcontractor construction crews, ensuring productivity and workmanship standards. Review and endorse subcontractor method statements, JSAs, and work schedules. Mentor and provide technical guidance to junior site engineers and supervisors.<br>Technical & Engineering Support Review and interpret construction drawings and specifications; raise RFIs and technical queries as needed. Support constructability reviews and provide field level input on execution sequencing. Coordinate as built documentation and redline markups with the engineering team.<br>Interface & SIMOPS Coordination Coordinate construction interfaces with brownfield operations, other contractors, and simultaneous operations (SIMOPS). Support work front handover and tie-in coordination with operations and other disciplines. Materials & Equipment Coordination Coordinate timely availability of materials, plant, and equipment for construction work fronts. Monitor equipment utilization and support optimization of site resources. Flag material or equipment shortages early and coordinate corrective sourcing with procurement/logistics.<br>Deputizing & Escalation Act on behalf of the Construction Manager in their absence, representing the project in key site meetings and decisions. Escalate critical site issues, risks, and resource constraints to the Construction Manager in a timely manner. Support the Construction Manager in overall site construction strategy, sequencing, and execution planning. Champion a strong safety and quality culture across all work fronts under direct site oversight.<br>Role Specific Competencies:Bachelor's degree in Civil, Mechanical, or Construction Engineering PMP, NEC/FIDIC contract management, or equivalent certification preferred Minimum 10-12 years' construction experience, with significant exposure to oil & gas / pipeline projects Minimum 6 years’ experience in Saudi Arabia, preferably on Saudi Aramco pipeline/construction projects Saudi Aramco approval preferred Strong knowledge of pipeline construction methods (ROW, trenching, welding, lowering-in, hydrotesting, tie-ins) Strong knowledge of PTW systems and Saudi Aramco construction standards Proven leadership and site supervisory skills, able to deputize for senior site management Strong planning, scheduling, and progress reporting skills Proficiency in reading and interpreting construction drawings and technical specifications Effective communication and coordination