وظائف مهندس تفتيش هندسي في السعودية

<p>Support the HSE Manager in implementing the Project HSE Management System, HSE Plan, procedures, and requirements. Coordinate daily HSE activities across assigned construction and project work areas. Conduct regular site HSE inspections, safety walks, and compliance checks. Identify unsafe acts, unsafe conditions, hazards, and potential risks and ensure appropriate corrective actions are implemented. Monitor contractor and subcontractor compliance with approved HSE procedures and requirements. Review Risk Assessments, Job Safety Analyses (JSA/JHA), and Method Statements from an HSE perspective. Ensure site activities are executed in accordance with approved risk controls and safe work procedures. Monitor implementation of Permit to Work (PTW) requirements for high-risk activities. Monitor high-risk activities including lifting operations, work at height, excavation, confined spaces, hot work, electrical works, temporary works, and heavy equipment operations. Support implementation of airport and airside safety requirements for activities conducted within operational or restricted areas. Coordinate with construction teams regarding safe access, logistics, traffic management, equipment movement, and work-zone controls. Ensure appropriate barricading, signage, access control, and exclusion zones are maintained. Conduct daily safety inspections and provide immediate advice to site teams regarding unsafe conditions. Stop or escalate unsafe work where there is an immediate risk to personnel, property, or airport operations. Participate in incident, accident, near-miss, and unsafe-condition investigations. Assist with Root Cause Analysis (RCA) and development of corrective and preventive actions. Monitor and follow up on closure of HSE observations, inspection findings, and corrective actions. Maintain accurate HSE inspection, observation, incident, and corrective action records. Support the implementation of project HSE awareness campaigns, safety initiatives, and behavioral safety programs. Coordinate and participate in site induction, toolbox talks, safety briefings, and safety awareness sessions. Identify HSE training needs and support the HSE Manager in coordinating required training. Verify that workers and safety-critical personnel have the required training, competency, and certifications. Monitor compliance with requirements for operators, lifting personnel, scaffolders, banksmen, signalers, and other safety-critical roles. Conduct regular inspections of lifting equipment, scaffolding, access equipment, PPE, emergency equipment, fire extinguishers, and safety facilities, as applicable. Monitor site housekeeping, waste management, material storage, and access/egress arrangements. Support implementation of environmental controls including dust, noise, waste, spills, and hazardous material management. Monitor safe handling, storage, transportation, and use of hazardous substances and chemicals. Participate in emergency preparedness activities, drills, and exercises. Ensure emergency routes, assembly points, first-aid facilities, and emergency equipment remain accessible and clearly identified. Support the implementation of heat stress, fatigue management, welfare, and occupational health requirements. Coordinate with Quality and Construction teams on HSE-related non-conformances and corrective actions. Attend daily coordination and construction meetings and provide HSE updates and recommendations. Prepare daily, weekly, and periodic HSE reports for assigned areas. Monitor HSE KPIs, trends, observations, and recurring safety issues. Support HSE audits conducted by the project, client, consultant, or third parties. Assist in maintaining HSE documentation and records required for project audits and handover. Promote a positive safety culture and Zero Harm approach across the project. Provide practical HSE guidance to supervisors, engineers, foremen, and workforce personnel. Escalate significant HSE risks, incidents, and recurring non-compliances to the HSE Manager. Support continuous improvement initiatives and implementation of HSE lessons learned.</p><p>Strong site presence and safety leadership. Excellent communication and interpersonal skills. Proactive approach to identifying and controlling hazards. Strong observation and attention-to-detail skills. Ability to communicate safety requirements effectively to both management and workforce personnel. Good problem-solving and decision-making abilities. Ability to work effectively with multidisciplinary teams and contractors. Strong ability to influence safe behavior and promote a positive safety culture. Ability to remain calm and professional when dealing with high-risk situations. Strong organizational and time-management skills. High level of integrity and commitment to HSE standards. Ability to work under pressure and within demanding construction environments.</p><p><strong>Desired Candidate Profile</strong></p><p>Bachelor s degree or diploma in Occupational Health &amp; Safety, Engineering, Environmental Science, or a related discipline. 5+ years of relevant HSE experience in construction, infrastructure, airport, civil, or large-scale development projects. Proven experience in site HSE coordination and contractor management. Experience working in airport / airside environments is highly preferred. Good knowledge of construction safety practices, risk assessment, incident prevention, and site inspection. Good understanding of applicable Saudi HSE requirements and project/client HSE standards. NEBOSH IGC or equivalent. IOSH Managing Safely or equivalent. OSHA training/certification is an advantage. ISO 45001 awareness or Internal Auditor certification is an advantage. First Aid / CPR certification is preferred. Relevant fire safety, lifting safety, or confined-space training is an advantage.</p><ul><li>HSE Management Systems</li><li>Construction Safety</li><li>Airport / Airside Safety</li><li>Site HSE Inspections</li><li>Risk Assessment</li><li>JSA / JHA</li><li>Method Statement Review</li><li>Permit to Work (PTW)</li><li>High-Risk Activity Controls</li><li>Work at Height</li><li>Confined Space</li><li>Lifting Operations</li><li>Excavation &amp; Trenching</li><li>Hot Work</li><li>Electrical Safety</li><li>Traffic &amp; Logistics Safety</li><li>Emergency Preparedness</li><li>Incident &amp; Near-Miss Investigation</li><li>Root Cause Analysis</li><li>Corrective &amp; Preventive Actions</li><li>Contractor &amp; Subcontractor HSE Management</li><li>Toolbox Talks &amp; Safety Induction</li><li>HSE Training &amp; Awareness</li><li>PPE Compliance</li><li>Environmental Controls</li><li>Hazardous Materials Management</li><li>Waste Management</li><li>HSE Reporting &amp; Documentation</li><li>HSE KPI Monitoring</li></ul>

<p>We are seeking a detail-oriented Procurement Quality Control Supervisor to join our construction team in Riyadh. This role is critical in ensuring that all procured materials meet the highest quality standards and comply with project specifications, contributing to the successful execution of construction projects. Responsibilities: - Oversee and manage quality control processes for all procured construction materials and equipment. - Coordinate with suppliers and vendors to ensure material quality compliance and timely delivery. - Inspect and verify incoming materials against quality standards and project requirements. - Develop and implement quality control procedures and documentation. - Collaborate with project managers and procurement teams to resolve quality-related issues. - Maintain accurate records of inspections, tests, and supplier certifications. - Conduct training sessions for procurement and site teams on quality standards and procedures. - Ensure compliance with local regulations and industry standards in all procurement quality activities.</p><p>- Bachelor's degree in Engineering, Quality Management, or related field. - Proven experience in procurement quality control within the construction industry. - Strong knowledge of construction materials and quality standards. - Excellent inspection and testing skills. - Ability to analyze and resolve quality issues effectively. - Familiarity with procurement and quality control documentation. - Strong communication and coordination skills. - Attention to detail and commitment to upholding high-quality standards. - Ability to work in Riyadh, Saudi Arabia, and adapt to a multicultural work environment.</p>

<p>We are seeking a detail-oriented Procurement Quality Control Supervisor to join our construction team in Riyadh. This role is critical in ensuring that all procured materials meet the highest quality standards and comply with project specifications, contributing to the successful execution of construction projects. Responsibilities: - Oversee and manage quality control processes for all procured construction materials and equipment. - Coordinate with suppliers and vendors to ensure material quality compliance and timely delivery. - Inspect and verify incoming materials against quality standards and project requirements. - Develop and implement quality control procedures and documentation. - Collaborate with project managers and procurement teams to resolve quality-related issues. - Maintain accurate records of inspections, tests, and supplier certifications. - Conduct training sessions for procurement and site teams on quality standards and procedures. - Ensure compliance with local regulations and industry standards in all procurement quality activities.</p><p>- Bachelor's degree in Engineering, Quality Management, or related field. - Proven experience in procurement quality control within the construction industry. - Strong knowledge of construction materials and quality standards. - Excellent inspection and testing skills. - Ability to analyze and resolve quality issues effectively. - Familiarity with procurement and quality control documentation. - Strong communication and coordination skills. - Attention to detail and commitment to upholding high-quality standards. - Ability to work in Riyadh, Saudi Arabia, and adapt to a multicultural work environment.</p>

<p>Identify and analyze risks associated with dam design, construction, operation, maintenance and rehabilitation activities.</p><p>Assess technical, structural, geotechnical, hydrological, hydraulic, operational, environmental, financial and industrial risks.</p><p>Review inspection findings, monitoring data, asset-condition reports, incidents and O&amp;M performance information to identify existing and emerging risks.</p><p>Support assessments of risks associated with flooding, extreme rainfall, overtopping, seepage, slope instability, structural deterioration and equipment failure.</p><p>Evaluate risk likelihood, potential consequences and existing controls using approved risk-assessment methodologies.</p><p>Develop practical prevention, mitigation, monitoring and contingency plans.</p><p>Support the preparation and implementation of risk-management policies, procedures and control measures.</p><p>Monitor preventive actions and verify their implementation against agreed responsibilities and target dates.</p><p>Maintain project and operational risk registers, databases, models and corrective-action trackers.</p><p>Record risk descriptions, causes, consequences, ratings, controls, mitigation actions, owners and due dates.</p><p>Regularly update risk information to reflect changing site conditions, operational performance and project developments.</p><p>Assist with risk workshops, technical reviews and multidisciplinary risk-assessment sessions.</p><p>Coordinate with risk owners to obtain updates and follow up overdue or incomplete mitigation actions.</p><p>Review contractors risk-management plans, method statements, emergency arrangements and relevant technical submissions.</p><p>Monitor contractor compliance with approved risk controls and contractual requirements.</p><p>Support the integration of risk requirements into project plans, O&amp;M procedures, technical specifications and contracts.</p><p>Develop risk indicators, dashboards, trend analyses and early-warning information.</p><p>Prepare periodic risk reports, follow-up analyses, management summaries and recommended actions.</p><p>Escalate critical and high-priority risks in accordance with approved governance and communication procedures.</p><p>Support emergency action planning, contingency planning and business-continuity activities.</p><p>Maintain organized records of risk studies, assessment reports, workshop outputs and supporting evidence.</p><p>Contribute to lessons-learned reviews and the continuous improvement of risk-management processes.</p><p>Prepare clear daily, weekly, monthly, annual and technical reports as required by the assignment.</p><p>Coordinate with government stakeholders, consultants, contractors and multidisciplinary teams.</p><p>Attend meetings, risk workshops, inspections and site visits anywhere in Saudi Arabia as required.</p><p>Comply with Saudi laws, applicable codes, Client procedures, quality requirements and occupational health and safety obligations.</p><p><strong>Desired Candidate Profile</strong></p><p>Bachelor s degree in Engineering, Risk Management or an equivalent discipline from a recognized university.</p><p>Minimum 6 years of professional experience closely related to dam design, operation or maintenance.</p><p>Proven experience conducting or supporting risk assessments for dams and associated infrastructure.</p><p>Evidence of previous involvement in dam-risk studies, assessments or reports is required.</p><p>Understanding of dam-safety hazards, failure modes, consequence assessment and risk-mitigation principles.</p><p>Experience maintaining risk registers, databases, assessment models and corrective-action trackers.</p><p>Ability to analyze technical reports, inspection findings, monitoring data and O&amp;M performance information.</p><p>Knowledge of qualitative and semi-quantitative risk-assessment methods.</p><p>Strong analytical, technical-reporting and data-management skills.</p><p>Relevant experience must be supported by verifiable employment records, project references, reports or studies when requested.</p>

<p>Leidos Arabia is seeking a Logistics Analyst to work full time in the Kingdom of Saudi Arabia supporting the Royal Saudi Naval Forces. Job Descriptions: Establish and maintain open order files for the NSCs outstanding purchase material, main support is USN and SAIC CAM incoming shipments. Distribute the incoming shipment information (Copy of Airway bill, DD 1149-incoming materials details etc). to the RSNF Logistics officer for the arranging the customs clearance. Arrange return RMA shipment (for equipment repair or change etc.) to send it back to the vendor. Establish and maintain open purchase order files for the Naval Support Center (NSC) for tracking outstanding purchase materials. Ensure that all received materials conform to the purchase order or contract specifications and quantities, and process the related procurement receipt documents. Perform the receipt, check-in, and inspection of all incoming materials, including Material Turned-Into Store (MTIS). Investigate any material receipt overages, shortages, or damages and initiate the necessary corrective actions and correspondence. Prepare and distribute rejection notices, material inspection reports, Reports of Discrepancy (RODs), and invoices related to material receipts. Segregate received materials for storage or for direct turnover to customers as required. Identify shelf-life items and ensure they are issued before the expiration date (Toner Cartridges etc). Prepare the Monthly Supply Report. Prepare shipment weekly status Report and distribute to respective personnel. Prepare monthly logistics activities report and send to IKM and SAIC admin office. Perform other tasks as assigned by the Logistics Officer related to US Navy and SAIC CAM equipment.</p><p><strong>Desired Candidate Profile</strong></p><p>BA degree or equivalent experience and less than 2 years prior relevant experience. MS Office English language comprehension Must be able to work onsite. Must be able to lift 50 lbs. Managing all Contactor Acquired Material (CAMs), receiving them, auditing the received CAMs against what is supposed to be in the delivery sometimes referred to as a bill of material or manifest. Tracking this on a excel spreadsheet, working closely with Gilbert on the CAM lifecycle. Attending the 5pm Engineering Synch every Wed., Providing a weekly status report by COB on Thursdays. Responding to email with the US Navy Logistics POC, tracking, and managing these materials. Able to do physical inventory and audits of these materials. Working with the O&amp;M, USN and RSNF with timely communications. Being responsive and proactive. Able to work independently. If you're looking for comfort, keep scrolling. At Leidos, we outthink, outbuild, and outpace the status quo because the mission demands it. We're not hiring followers. We're recruiting the ones who disrupt, provoke, and refuse to fail. Step 10 is ancient history. We're already at step 30 and moving faster than anyone else dares.</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Position Summary</p><p>The Technician is responsible for diagnosing, repairing, and servicing customer vehicles to OEM specifications, within standard labour times, and to first-time-right quality.</p><p>The role directly drives workshop productivity, customer satisfaction, and aftersales profitability by combining strong technical capability with disciplined adherence to standard operating procedures, quality standards, safety compliance, and workshop housekeeping. The Technician plays a critical role in ensuring efficient workshop flow, reducing customer comeback rates, and maintaining the dealership’s service reputation.</p><p>Key Responsibilities</p><p>Vehicle Repair &amp; Maintenance</p><p>• Perform scheduled maintenance, mechanical repairs, and diagnostic work on customer vehicles in accordance with OEM standards and dealership processes</p><p>• Complete assigned Repair Orders (ROs) within standard labour times while maintaining high repair quality and efficiency</p><p>• Carry out inspections during servicing and identify additional repair requirements, reporting findings clearly to the Service Advisor for customer approval</p><p>• Ensure all repair work is completed accurately and aligned with manufacturer specifications and technical procedures</p><p>Diagnosis &amp; Quality Assurance</p><p>• Use OEM diagnostic tools, scan systems, and troubleshooting procedures to identify root causes of vehicle faults accurately</p><p>• Perform road tests and final quality inspections to verify repair effectiveness before handing vehicles back to the Service Advisor</p><p>• Complete all technical check sheets, inspection reports, and job logs accurately for every service and repair activity</p><p>• Support reduction of repeat repairs and customer comeback cases through strong first-time-right execution</p><p>Safety, Tools &amp; Workshop Discipline</p><p>• Use Special Service Tools (SSTs), lifting equipment, and workshop machinery correctly and safely at all times</p><p>• Report damaged tools, calibration requirements, or equipment faults immediately to the Workshop Supervisor</p><p>• Maintain a clean, safe, and organized workstation aligned with 5S standards and OEM housekeeping requirements</p><p>• Strictly follow PPE usage, lifting procedures, chemical handling standards, and workshop HSE protocols</p><p>Continuous Learning &amp; Technical Development</p><p>• Complete all OEM technical training programmes and internal certification requirements to maintain technical competency</p><p>• Stay updated on Technical Service Bulletins (TSBs), recall campaigns, software updates, and new model repair procedures issued by the manufacturer</p><p>• Support workshop continuous improvement initiatives by sharing technical knowledge and learnings from complex repair cases with peers and supervisors</p><p>• Build capability in emerging technologies including Hybrid, EV, ADAS, and connected vehicle systems where applicable</p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p>Educational Requirements</p><p>• Automotive Diploma, Vocational Certificate, or equivalent technical qualification</p><p>• OEM technical certification is highly desirable</p><p>Experience Requirements</p><p>• Minimum 2–5 years of hands-on workshop experience within a franchised automotive dealership environment</p><p>Technical Skills</p><p>• Strong mechanical knowledge across engine, transmission, suspension, steering, braking, and electrical systems</p><p>• Working proficiency in OEM diagnostic platforms, scan tools, and electronic troubleshooting systems</p><p>• Ability to interpret wiring diagrams, hydraulic schematics, workshop manuals, and technical repair documentation</p><p>• Basic computer literacy for DMS usage, job booking updates, and digital inspection reporting</p><p>• Familiarity with hybrid and EV systems is considered a strong advantage</p></div>

<h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">Role Overview</h3> <p style="margin:0 0 12px; ************;">Tripod Global is seeking a <strong style="font-weight:700;">HSE Officer (Saudi National)</strong> to join our team in Al Kharj, Riyadh, Saudi Arabia. This full-time role is essential for ensuring a safe, compliant, and efficient working environment across our manufacturing and site operations. The successful candidate will support the company's commitment to continuous improvement and adherence to international HSE standards.</p> <h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">Key Responsibilities</h3> <ul style="margin:0 0 12px; padding-inline-start:24px; list-style-type:disc; list-style-position:outside;"> <li style="margin:0 0 6px;">Conduct daily HSE inspections across production, warehouse, painting, storage, and dispatch areas.</li> <li style="margin:0 0 6px;">Perform Risk Assessments, HIRA, and Job Safety Analyses (JSA) before work activities.</li> <li style="margin:0 0 6px;">Ensure Personal Protective Equipment (PPE) compliance, machine guarding, and Lockout/Tagout (LOTO) implementation.</li> <li style="margin:0 0 6px;">Monitor dust extraction systems, chemical storage, paint booths, and housekeeping standards.</li> <li style="margin:0 0 6px;">Investigate accidents, incidents, and near misses, then implement corrective actions.</li> <li style="margin:0 0 6px;">Prepare daily inspection reports, weekly site reports, monthly HSE reports, accident investigation reports, and ISO audit reports.</li> <li style="margin:0 0 6px;">Maintain comprehensive HSE documentation.</li> <li style="margin:0 0 6px;">Track HSE Key Performance Indicators (KPIs), including Total Man-Hours Worked, LTI-Free Man-Hours, Total Recordable Incident Rate (TRIR), and safety observations.</li> <li style="margin:0 0 6px;">Conduct toolbox talks, safety inductions, emergency drills, and fire evacuation exercises.</li> <li style="margin:0 0 6px;">Participate in internal ISO 45001, ISO 14001, and ISO 9001 audits.</li> <li style="margin:0 0 6px;">Ensure compliance with Saudi regulations and company HSE standards.</li> <li style="margin:0 0 6px;">Promote a strong safety culture through employee engagement and continuous improvement initiatives.</li> </ul> <h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">HSE Standards and Compliance</h3> <p style="margin:0 0 12px; ************;">The HSE Officer will contribute directly to upholding and enhancing the company's health, safety, and environmental framework. This involves active participation in internal audits for <strong style="font-weight:700;">ISO 45001, ISO 14001, and ISO 9001</strong>, ensuring all operational practices meet both international standards and local Saudi regulations. A commitment to fostering a proactive safety culture through employee engagement is a key aspect of this role.</p> <h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">Reporting and Performance Monitoring</h3> <p style="margin:0 0 12px; ************;">A core function of this position involves diligent reporting and tracking of HSE performance. The officer will be responsible for preparing various reports, ranging from daily inspections to monthly HSE summaries and detailed accident investigations. Monitoring key performance indicators such as Total Man-Hours Worked, LTI-Free Man-Hours, and TRIR is crucial for identifying trends and driving continuous improvement in safety outcomes.</p> <h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">Qualifications and Experience</h3> <ul style="margin:0 0 12px; padding-inline-start:24px; list-style-type:disc; list-style-position:outside;"> <li style="margin:0 0 6px;">Experience required: <strong style="font-weight:700;">0-1 years</strong> in a Health, Safety &amp; Environment role.</li> <li style="margin:0 0 6px;">Demonstrated understanding of HSE inspection protocols, risk assessment methodologies (HIRA, JSA), and safety procedures (PPE, LOTO).</li> <li style="margin:0 0 6px;">Familiarity with ISO 45001, ISO 14001, and ISO 9001 standards is beneficial.</li> <li style="margin:0 0 6px;">Ability to prepare clear and accurate HSE reports and maintain documentation.</li> <li style="margin:0 0 6px;">Must be a <strong style="font-weight:700;">Saudi National</strong>.</li> </ul> <h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">Work Setting</h3> <p style="margin:0 0 12px; ************;">This is a <strong style="font-weight:700;">full-time position</strong> based in Al Kharj, Riyadh, Saudi Arabia. The role involves working across various operational areas including manufacturing, production, warehousing, painting, storage, and dispatch, requiring a presence on site to ensure safety protocols are consistently met.</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Date Posted: 2026-06-29 Work location Jeddah, Saudi Arabia. Responsibilities to Anticipate: Diagnoses and troubleshoot faults Use Depot Test Equipment (DTE) Enforce safety regulations and procedures Provide technical assistance and support when needed Analyze Circuit Card Assemblies (CCAs) and power supplies Read engineering documents and electronic circuit diagrams</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Diploma in Electronics from an accredited foreign or local college or institute Must be a Saudi national 8 years prior experience in troubleshooting, fault isolation, repair, and final inspection of defense systems Experience in soldering, splicing, and wiring is preferred Knowledge in reading and understanding engineering documents, and electronic circuit diagrams General knowledge of maintenance workshop procedure</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $3.9B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism.</p><p>Serves as the Aviation Maintenance Quality Control/Quality Assurance (QC/QA) Technical Inspector under the direction of the QC Manager. Responsibilities encompass the sign-off of all red X and circle red X conditions related to aircraft systems and components. Engages in technical inspection of specific airframe, powertrain, power-plant, armament, electrical, and avionics systems. Evaluates the need for Maintenance Test Flights (MTF) and Maintenance Operational Checks (MOC), providing inspection criteria interpretation to the maintenance staff. Utilizes common measuring tools, precision measuring gauges, and alignment fixtures (GFE). Assists the Customer in maintaining a current technical library and relevant aircraft forms and records. Collaborates with the Customer Weight and Balance (W&amp;B) technician to complete Weight and Balance records for all assigned aircraft, adhering to Customer directives and applicable manuals. Assumes the role of the site QC Data Analyst and the technical and compliance documentation administrator. Establishes maintenance quality control processes, procedures, standards, measures, and reports, supporting the maintenance program for all maintenance support activities. Prioritizes safety in all related operations and conducts maintenance and technical inspector training as required, inputting OJT training data into the learning management system database.</p><p>Performs quality technical inspection of aircraft, equipment, vehicles, aircraft components, parts, and systems (including avionics, electrical, instrument and armament) as required by functional assignment. Performs quality and safety inspections of on-site equipment and tools used in aircraft maintenance, vehicles, and equipment. Performs in-progress and final quality technical inspections during maintenance, repair, modification, rework, and overhaul of aircraft, aircraft components, and component parts. Inspects job procedural forms and maintenance forms used in the performance of aircraft maintenance, vehicle and equipment maintenance to assure compliance with approved methods and procedures. Assists in preparation, processing, and answering of Quality Deficiency Reports (QDRs). Assists in aircraft accident investigations, prepares estimated cost of damage reports as required. Establish the maintenance quality control processes, procedures, standards, measures, and reports in support of the maintenance program and in coordination with Supply Chain Management (SCM) activities. Directs inquires, investigations, and research analysis related to quality control maintenance processes and supporting maintenance activities, to the QC Manager. Ensures all quality control maintenance operations and related maintenance support activities are conducted in a safe manner. In coordination with the QC Manager, supports the Downed Aircraft Recovery Team (DART) processes and procedures. Conducts maintenance training and technical inspector training as required. Other tasks as directed by the QC Manager. Works within the maintenance quality control processes, procedures, and standards. Ensures all maintenance operations and related maintenance support activities are conducted in a safe manner. Supports, in coordination with the Maintenance Manager and Flight Operations Manager, the Downed Aircraft Recovery Team (DART) process and procedure. Performs within the broad guidelines of duties and responsibilities with significant choice of methods. Authority to select and implement goals and objectives within the execution of duties and responsibilities.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Associates degree required; Bachelor s degree preferred.</p><p>As a condition of employment in Saudi Arabia, all candidates must successfully complete the Saudi Ministry of Human Resources and Social Development s Qualification Verification Program (QVP) to ensure eligibility for visa processing and employment authorization.</p><p>Federal Aviation Administration (FAA) Inspector Authorization (IA) certificate.</p><p>FAA Airframe and Powerplant certificate.</p><p>Five (5) years experience maintaining specific or similar Mission Design Series (MDS).</p><p>Able to use the Automated Weight and Balance Software (AWBS).</p><p>Demonstrated knowledge and experience of rotary wing Aviation operations inclusive of maintenance, Aviation logistics, flight operations and training.</p><p>Army Aviation maintenance certification with rating in the AH-64 or UH-60 or MD500 Series Aircraft (Army Rotary Wing equivalent) or OH-58D desired.</p><p>FAA, A&amp;P certificate or Equivalent required.</p><p>Proficient in the use of computer-hosted interactive technical manuals, aircraft maintenance forms, and other aircraft related documentation.</p><p>Graduate of a US Military Aircraft Maintenance Course or civilian A&amp;P equivalent with a minimum of 5 years experience</p><p>Possess a valid U.S driver s license and Passport.</p><p>DD214 required for military experience.</p><p>Must be able to pass employment and deployment qualification requirements that include medical, drug testing, background checks, etc.</p><p>Previous experience in a leadership or supervisory role within a military maintenance unit.</p><p>Strong knowledge of military logistics procedures and regulations.</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li><p>Responsible for ensuring the workplace and project sites are compliant with health, safety, and environmental regulations, conducting audits, and promoting safety culture.</p></li><li><p>Responsible for implementing Safety Policies, auditing and inspection.</p></li><li><p>Ensure that everyone acts in accordance with laws, monitor and stay updated on safety regulations, codes, and standards applicable to projects under progress.</p></li><li><p>Maintain accurate records and documentation for safety inspections, incidents, and training.</p></li><li><p>Assess workplace hazards and risks and recommend appropriate measures to mitigate them.</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>.</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Setup machines (calibration, cleaning, etc..) to start a cleaning cycle. Perform regular cleaning using different machine/equipment. Cleaning and sanitizing the equipment. Monitor and record equipment performance. Operates mechanized sweepers. Performs routine inspection and maintenance on vehicles such as checking oil, water, and tires. Promotes continuous improvement of workplace safety and environmental practices. Performs miscellaneous job-related duties as assigned. Specific Accountabilities Perform daily auditing of equipment performance. Identify any snags, defects and generate a report on the corrective measures. Knowledgeable in</p></div></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Duties &amp; Responsibilities CAFM/CMMS PPM WO generation, distribution, status updating, and reporting Downloading, sorting, and distribution in agreed document format, of the Planned Preventive Maintenance work order (PPM WO) to the responsible departments. Updating of the PPM WO status based on the feedback of the responsible departments. Uploading the soft copy of the relevant supporting documents related to the PPM WO as provided by the responsible department, such as inspection reports, third-party certificates, asset analysis reports, utility analysis report, etc.,</p></div></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Assists in the daily maintenance and inspection of heavy equipment.</p><p>Adheres to safety regulations and enforces safety procedures.</p><p>Conducts routine site inspections to identify potential hazards.</p><p>Collaborates with other team members to ensure efficient operations.</p><p>Communicates effectively with the supervisor and other team members.</p><p>Performs pre-operational checks on equipment.</p><p>Cleans and maintains equipment.</p><p>Transports materials and equipment to designated areas.</p><p>Assists in troubleshooting equipment malfunctions.</p><p>Follows site-specific safety protocols.</p><p>Participates in safety meetings and training sessions.</p><p>Performs preventive maintenance &amp; general upkeep of equipment.</p></div></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Operate Heavy Equipment Drive and operate equipment/vehicles as per assigned work orders. (general site preparation, landscaping, trash removal, and related assignments) Investigate safety loads to correct material loads. Secure cargo for transport, using ropes, blocks, chains, binders or others. Maintain vehicle/equipment in good operating condition. Maintain vehicles and equipment Report vehicle defects, accidents, traffic violations or damage to vehicles. Perform minor maintenance tasks. Performs routine inspection and maintenance on vehicles such as checking oil, water, and tires. Maintain safety Follow up safety</p></div></section>