وظائف مهندس تفتيش هندسي في السعودية

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Parsons are looking for a seasoned Senior Project Manager: Station (MEP) to join their team! The Senior Project Manager: Station MEP (PMC) is a senior, client facing role responsible for managing the end to end design and build process of station MEP works on major rail/transit or complex infrastructure projects. This is a non operational position focused on project and design management, technical assurance, and contractor oversight on behalf of the client, ensuring that all MEP systems for stations (and associated ancillary buildings) are delivered safely, on time, within budget, and in full compliance with the employer s requirements, codes, and standards. The role requires approximately 15 years of experience in building or rail MEP (mechanical, electrical, public health, fire &amp; life safety, ELV systems), including substantial experience in design management and construction supervision, ideally within a PMC, consulting engineer, or client organization.</p><p>What You'll Be Doing;</p><ul><li>Act as the primary PMC point of contact for all station MEP matters, representing the client in meetings with designers, contractors, authorities, and other stakeholders.</li><li>Ensure that the employer s requirements, contracts, and design briefs for station MEP systems are clearly communicated, understood, and implemented.</li><li>Provide independent, objective advice and recommendations to the client on technical, program, commercial, and risk issues related to station MEP works.</li><li>Manage and oversee the full MEP design lifecycle for stations: concept, schematic, detailed design, and IFC stages.</li><li>Review and comment on design submissions, drawings, calculations, models, and specifications for HVAC, power distribution, lighting, fire protection, plumbing and drainage, vertical transportation, ELV/BMS, and life safety systems.</li><li>Ensure design compliance with employer s requirements, project technical standards, local codes, international standards, fire and life safety regulations, and authority requirements.</li><li>Chair and coordinate design review meetings, value engineering and constructability workshops, and multi discipline coordination sessions (architecture, structure, rail systems, civil).</li><li>Oversee requirements management and traceability, design verification and validation, and close out of design review comments.</li><li>Ensure interfaces between MEP, architecture, structure, rail systems, and station operations are identified and resolved at design stage.</li><li>Support the preparation and review of technical sections of tender documents, scopes of work, and employer s requirements for station MEP packages.</li><li>Review and evaluate technical proposals, clarifications, and deviations from contractors and suppliers; provide recommendations to the client for award.</li><li>Assist in contract negotiations and post award technical clarifications with MEP contractors and key vendors.</li><li>From a PMC perspective, oversee and manage construction and installation activities for station MEP systems, ensuring alignment with approved designs, specifications, and quality standards.</li><li>Monitor contractor construction methodologies, sequencing, and resource planning for MEP works; challenge and improve where needed.</li><li>Coordinate resolution of site technical issues and RFIs in collaboration with design consultants and contractors.</li><li>Track and manage MEP interfaces with civil works, finishes, systems integration, and other trades to avoid clashes and rework.</li><li>Monitor compliance with project HSE requirements during MEP construction activities, and support the client s HSE objectives.</li><li>Review and approve, on behalf of the client, testing and commissioning strategies, plans, procedures, and integrated test schedules for station MEP systems.</li><li>Monitor execution of pre commissioning, functional performance tests, integrated systems testing, and life safety commissioning through reports and selective site attendance.</li><li>Review test results, non conformance reports, and snag lists; ensure timely rectification and closure by contractors.</li><li>Coordinate with operations, maintenance, and systems teams to ensure that MEP systems meet handover, operability, maintainability, and life cycle requirements.</li><li>Oversee completion and quality of as built documentation, O&amp;M manuals, training materials, and handover deliverables.</li><li>Manage and track station MEP design and construction activities against the approved master schedule and key milestones.</li><li>Identify critical path activities and dependencies affecting MEP delivery; initiate recovery plans where schedule slippage occurs.</li><li>Monitor MEP related costs, variations, and potential claims; support the client in negotiation and resolution.</li><li>Maintain and regularly update risk registers for station MEP works, identifying mitigation measures and contingency plans.</li><li>Provide accurate, timely progress reports, dashboards, and presentations for the client s senior management and governance committees.</li><li>Coordinate with client internal departments (Operations, Maintenance, Safety, Security, IT, Commercial, etc.) to ensure MEP designs and installations meet operational and business requirements.</li><li>Interface with local authorities (e.g., civil defense, utility providers, building control) to support timely approvals, NOCs, inspections, and permits.</li><li>Facilitate coordination between multiple design consultants, contractors, systems integrators, and third parties involved in station delivery.</li><li>Lead and mentor a team of station MEP engineers and specialists working within the PMC team.</li><li>Promote a culture of quality, safety, and proactive risk management across all MEP related activities.</li><li>Ensure that robust quality assurance/quality control (QA/QC) processes are applied to MEP design and construction deliverables.</li><li>Support knowledge transfer, continuous improvement, and lessons learned across the program.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>What Required Skills You'll Bring;</p><ul><li>Bachelor s degree in Mechanical, Electrical, Building Services, or related Engineering discipline.</li><li>Master s degree in Engineering, Project Management, or related field is an advantage.</li><li>Professional engineering registration or chartership (CEng, PE) is highly desirable.</li><li>Project management certification ( PMP, PRINCE2) is an advantage.</li><li>Minimum 15 years experience in MEP engineering for major buildings (early career) AND rail/transit stations (current &amp; essential), with substantial design and site supervision exposure.</li><li>Significant experience working within a PMC, client organization, or international consultancy on large, multi discipline infrastructure or transportation projects.</li><li>Demonstrated track record managing station or complex building MEP packages from design through testing and commissioning.</li><li>Strong experience coordinating multi discipline designs and managing contractors and vendors.</li><li>Prior experience on rail/metro stations or other complex, public use facilities (airports, hospitals, large commercial developments) is highly advantageous.</li><li>Deep technical understanding of station MEP systems: HVAC, power distribution, emergency power, lighting, public health, fire protection, fire alarm, BMS/SCADA, ELV systems, and life safety strategies.</li><li>Strong knowledge of relevant local codes, international standards, and fire and life safety regulations.</li><li>Proven ability to manage complex design and construction processes, with strong planning and organizational skills.</li><li>Excellent stakeholder management, communication, and negotiation skills in a multi cultural, multi discipline environment.</li><li>Strong analytical, problem solving, and decision making capabilities, with a focus on risk and issue management.</li><li>High level of professionalism, integrity, and client service orientation.</li><li>Proficiency with standard project management and office tools; familiarity with BIM/ Revit and common CDE/document control systems is an advantage.</li><li>Fluency in English (written and spoken); Arabic is ideal</li></ul><p></p></section>

<ul><li><p>Maintain relationship with existing & new clients.</p></li><li><p>Prepare, maintain company written practice, all NDT and PWHT procedures, project specification procedures in accordance with current edition of ASME, AWS, API, EEMUA, BS, EN, ISO codes and standards.</p></li><li><p>Preparation of ASME audits, NDT procedures, demonstration of the same, making demo records, review of radiographs, participations at pre-audit and final audits at ASME shops around UAE.</p></li><li><p>ASNT Level III witnessing of NDT, reports review and film review for ASME, AWS and API jobs.</p></li><li><p>Provide training & certification of (Level I/ Level II) NDT Technicians as per code requirements.</p></li><li><p>Maintain and review technician qualification files & records.</p></li><li><p>Overseeing all non-destructive testing (NDT) operations within the company.</p></li><li><p>Developing and implementing NDT procedures and protocols to ensure compliance with industry standards and regulations.</p></li><li><p>NDT Level III services- ASME Code stamped fabrication companies all over Saudi Arabia, UAE and Middle Eastern regions.</p></li><li><p>Ensure effective implementation of ISO & OHSAS standards and advise throughout the organization for proper compliance.</p></li><li><p>Supervising NDT Level III training and certification.</p></li><li><p>Interactions with all clients regarding all technician issues, complaints etc.</p></li><li><p>API-510, 653, 570 inspection services.</p></li><li><p>CSWIP welding inspection services.</p></li><li><p>BGAS Painting Inspections.</p></li><li><p>Prepare, maintain company written practice, all NDT and PWHT procedures, project specific procedures in accordance with current edition of ASME, AWS, API EEMUA, BS, EN, ISO codes and standards.</p></li><li><p>Preparations of ASME Audits, NDT procedures & demonstration of the same, preparing demo records, review of radiographs, participation at pre-audits and final audits at the ASME shops with ASME team leaders around Middle Eastern region.</p></li><li><p>Managing a team of NDT technicians and providing leadership, guidance, and training as needed.</p></li><li><p>Coordinating with other departments to integrate NDT processes into overall quality assurance and production workflows.</p></li><li><p>Conducting internal audit with team, preparing to get new accreditations for the company.</p></li><li><p>Assisting business development with project requirements, and technical, budgets, binding.</p></li><li><p>Preparing all the documents for Audit, attending audit with auditors, assisting inspector’s demonstration answering auditors’ questions.</p></li><li><p>Conducting regular inspections and audits to ensure the integrity and reliability of NDT equipment and processes.</p></li><li><p>Technical Support: Provide technical support to project teams, including interpretation of NDT codes, standards, and specifications.</p></li><li><p>Training and Development: Facilitate training sessions for NDT technicians and inspectors.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor’s degree in Engineering (Mechanical, Metallurgy, Materials, or equivalent).</li><li>ASNT / PCN / EN ISO 9712 NDT Level III certification in major methods (RT, UT, MT, PT, VT) – additional methods like PAUT, TOFD, ET are an advantage.</li><li>Additional certification in welding inspection (CSWIP 3.1/3.2, AWS CWI, or equivalent) is desirable.</li><li>Knowledge of international codes and standards (ASME, API, ASTM, ISO, AWS, EN, etc.).</li></ul><h3><strong>Experience</strong></h3><ul><li>Minimum <strong>10–15 years of professional experience</strong> in Non-Destructive Testing, with at least <strong>5+ years in a supervisory/technical management role</strong>.</li><li>Proven track record in developing and qualifying NDT procedures, techniques, and personnel.</li><li>Strong experience in <strong>oil & gas, power plants, fabrication yards, and in-service inspection</strong>.</li><li>Hands-on knowledge of advanced NDT (PAUT, TOFD, Digital RT, Eddy Current, etc.) is highly preferred.</li><li>Experience in audits, quality management systems (ISO 9001/17020/17025), and accreditation processes.</li></ul><h3><strong>Technical Skills</strong></h3><ul><li>Development, review, and approval of NDT procedures and techniques.</li><li>Interpretation of inspection results and issuing of technical reports.</li><li>Oversight of <strong>RBI (Risk-Based Inspection)</strong>, fitness-for-service assessments, and corrosion monitoring.</li><li>Knowledge of inspection software, data analysis tools, and digital NDT applications.</li><li>Strong troubleshooting, problem-solving, and decision-making ability in complex inspection scenarios.</li></ul><h3><strong>Management & Leadership</strong></h3><ul><li>Lead and mentor NDT Level I/II inspectors, ensuring compliance with procedures and standards.</li><li>Manage technical operations of the NDT department, including resource allocation, budgeting, and planning.</li><li>Provide technical support to clients and coordinate with third-party inspection agencies.</li><li>Conduct internal/external training, qualification, and certification of NDT personnel.</li><li>Liaise with clients on technical issues, bids, tenders, and project requirements.</li></ul><h3><strong>Other Requirements</strong></h3><ul><li>Strong communication and report-writing skills in English (Arabic/other languages is an advantage).</li><li>Excellent organizational and time management skills.</li><li>Willingness to travel to sites, fabrication yards, or shutdowns when required.</li><li>Strong commitment to <strong>HSE (Health, Safety, and Environment)</strong> standards.</li></ul>

<ul><li><p>Maintain relationship with existing & new clients.</p></li><li><p>Prepare, maintain company written practice, all NDT and PWHT procedures, project specification procedures in accordance with current edition of ASME, AWS, API, EEMUA, BS, EN, ISO codes and standards.</p></li><li><p>Preparation of ASME audits, NDT procedures, demonstration of the same, making demo records, review of radiographs, participations at pre-audit and final audits at ASME shops around UAE.</p></li><li><p>ASNT Level III witnessing of NDT, reports review and film review for ASME, AWS and API jobs.</p></li><li><p>Provide training & certification of (Level I/ Level II) NDT Technicians as per code requirements.</p></li><li><p>Maintain and review technician qualification files & records.</p></li><li><p>Overseeing all non-destructive testing (NDT) operations within the company.</p></li><li><p>Developing and implementing NDT procedures and protocols to ensure compliance with industry standards and regulations.</p></li><li><p>NDT Level III services- ASME Code stamped fabrication companies all over Saudi Arabia, UAE and Middle Eastern regions.</p></li><li><p>Ensure effective implementation of ISO & OHSAS standards and advise throughout the organization for proper compliance.</p></li><li><p>Supervising NDT Level III training and certification.</p></li><li><p>Interactions with all clients regarding all technician issues, complaints etc.</p></li><li><p>API-510, 653, 570 inspection services.</p></li><li><p>CSWIP welding inspection services.</p></li><li><p>BGAS Painting Inspections.</p></li><li><p>Prepare, maintain company written practice, all NDT and PWHT procedures, project specific procedures in accordance with current edition of ASME, AWS, API EEMUA, BS, EN, ISO codes and standards.</p></li><li><p>Preparations of ASME Audits, NDT procedures & demonstration of the same, preparing demo records, review of radiographs, participation at pre-audits and final audits at the ASME shops with ASME team leaders around Middle Eastern region.</p></li><li><p>Managing a team of NDT technicians and providing leadership, guidance, and training as needed.</p></li><li><p>Coordinating with other departments to integrate NDT processes into overall quality assurance and production workflows.</p></li><li><p>Conducting internal audit with team, preparing to get new accreditations for the company.</p></li><li><p>Assisting business development with project requirements, and technical, budgets, binding.</p></li><li><p>Preparing all the documents for Audit, attending audit with auditors, assisting inspector’s demonstration answering auditors’ questions.</p></li><li><p>Conducting regular inspections and audits to ensure the integrity and reliability of NDT equipment and processes.</p></li><li><p>Technical Support: Provide technical support to project teams, including interpretation of NDT codes, standards, and specifications.</p></li><li><p>Training and Development: Facilitate training sessions for NDT technicians and inspectors.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor’s degree in Engineering (Mechanical, Metallurgy, Materials, or equivalent).</li><li>ASNT / PCN / EN ISO 9712 NDT Level III certification in major methods (RT, UT, MT, PT, VT) – additional methods like PAUT, TOFD, ET are an advantage.</li><li>Additional certification in welding inspection (CSWIP 3.1/3.2, AWS CWI, or equivalent) is desirable.</li><li>Knowledge of international codes and standards (ASME, API, ASTM, ISO, AWS, EN, etc.).</li></ul><h3><strong>Experience</strong></h3><ul><li>Minimum <strong>10–15 years of professional experience</strong> in Non-Destructive Testing, with at least <strong>5+ years in a supervisory/technical management role</strong>.</li><li>Proven track record in developing and qualifying NDT procedures, techniques, and personnel.</li><li>Strong experience in <strong>oil & gas, power plants, fabrication yards, and in-service inspection</strong>.</li><li>Hands-on knowledge of advanced NDT (PAUT, TOFD, Digital RT, Eddy Current, etc.) is highly preferred.</li><li>Experience in audits, quality management systems (ISO 9001/17020/17025), and accreditation processes.</li></ul><h3><strong>Technical Skills</strong></h3><ul><li>Development, review, and approval of NDT procedures and techniques.</li><li>Interpretation of inspection results and issuing of technical reports.</li><li>Oversight of <strong>RBI (Risk-Based Inspection)</strong>, fitness-for-service assessments, and corrosion monitoring.</li><li>Knowledge of inspection software, data analysis tools, and digital NDT applications.</li><li>Strong troubleshooting, problem-solving, and decision-making ability in complex inspection scenarios.</li></ul><h3><strong>Management & Leadership</strong></h3><ul><li>Lead and mentor NDT Level I/II inspectors, ensuring compliance with procedures and standards.</li><li>Manage technical operations of the NDT department, including resource allocation, budgeting, and planning.</li><li>Provide technical support to clients and coordinate with third-party inspection agencies.</li><li>Conduct internal/external training, qualification, and certification of NDT personnel.</li><li>Liaise with clients on technical issues, bids, tenders, and project requirements.</li></ul><h3><strong>Other Requirements</strong></h3><ul><li>Strong communication and report-writing skills in English (Arabic/other languages is an advantage).</li><li>Excellent organizational and time management skills.</li><li>Willingness to travel to sites, fabrication yards, or shutdowns when required.</li><li>Strong commitment to <strong>HSE (Health, Safety, and Environment)</strong> standards.</li></ul>

<p>Support the implementation, monitoring, and continuous improvement of the Project Quality Management System across the Airport / Infrastructure / Airfield project. The role will provide specialist quality support to Engineering, Construction, Procurement, Commissioning, and Project Management teams, ensuring that project activities and deliverables comply with approved quality requirements, contractual obligations, specifications, standards, and Client expectations.</p><p>What You'll Be Doing:</p><ul><li>Support the implementation and maintenance of the Project Quality Management System (QMS).</li><li>Monitor compliance with the Project Quality Plan, quality procedures, specifications, standards, and contractual requirements.</li><li>Provide specialist quality support to Engineering, Construction, Procurement, Commissioning, and Project Management teams.</li><li>Review project quality procedures, Inspection and Test Plans (ITPs), Method Statements, checklists, and quality-related documentation.</li><li>Ensure quality requirements are clearly defined and incorporated into project execution plans and work packages.</li><li>Conduct quality surveillance and compliance inspections across project activities.</li><li>Monitor implementation of approved quality procedures by contractors, subcontractors, consultants, and suppliers.</li><li>Review and verify inspection and testing requirements for project works.</li><li>Monitor quality records, inspection reports, test results, material approvals, and other quality documentation.</li><li>Identify quality risks, trends, recurring deficiencies, and potential non-conformances.</li><li>Support the development and implementation of corrective and preventive actions.</li><li>Review Non-Conformance Reports (NCRs), observations, deficiencies, and quality concerns and monitor their timely closure.</li><li>Perform root cause analysis for significant or recurring quality issues.</li><li>Support the implementation of corrective and preventive action plans.</li><li>Conduct internal quality audits and support external and Client audits.</li><li>Prepare audit plans, audit reports, findings, observations, and follow-up actions.</li><li>Monitor closure of audit findings and verify effectiveness of corrective actions.</li><li>Review contractor and subcontractor Quality Management Systems and quality plans.</li><li>Participate in prequalification and quality capability assessments of contractors, suppliers, and subcontractors.</li><li>Review quality-related technical submissions, procedures, and project documentation.</li><li>Coordinate with Document Control to ensure quality records are properly controlled, traceable, and maintained.</li><li>Monitor quality performance indicators and prepare quality reports and dashboards.</li><li>Analyze project quality data to identify trends and opportunities for improvement.</li><li>Provide regular quality performance updates to the Project Quality Manager and Project Management.</li><li>Support quality awareness, training, workshops, and toolbox sessions.</li><li>Promote a proactive quality culture across the project.</li><li>Support investigation of quality incidents, failures, and major deficiencies.</li><li>Participate in technical and quality review meetings with Client, Consultant, Contractors, and project stakeholders.</li><li>Ensure lessons learned are captured and incorporated into project quality processes.</li><li>Support project handover and closeout by ensuring quality dossiers and records are complete and compliant.</li></ul><p>Engineering &amp; Design Quality Responsibilities</p><ul><li>Review engineering deliverables for compliance with approved quality requirements and project procedures.</li><li>Monitor implementation of design quality control and checking processes.</li><li>Support audits of Lead Design Consultants and specialist design consultants.</li><li>Monitor design review, checking, verification, and approval processes.</li><li>Track design-related quality comments, observations, and corrective actions.</li><li>Verify that design changes are appropriately reviewed, documented, and controlled.</li><li>Support multidisciplinary design quality reviews and technical audits.</li><li>Monitor compliance of engineering deliverables with applicable codes, standards, Client requirements, and approved design criteria.</li><li>Support resolution of recurring design quality issues and identify opportunities for process improvement.</li></ul><p>Construction Quality Responsibilities</p><ul><li>Monitor implementation of construction quality requirements across site activities.</li><li>Conduct surveillance inspections of critical construction activities.</li><li>Review ITPs, Method Statements, WIRs, MIRs, testing records, and quality documentation.</li><li>Verify that required inspections and tests are completed before subsequent construction activities proceed.</li><li>Monitor material quality, testing, traceability, storage, and compliance.</li><li>Support investigation of construction defects and recurring quality issues.</li><li>Monitor NCR trends and contractor performance.</li><li>Coordinate with Construction and QA/QC teams to ensure timely resolution of quality issues.</li></ul><p>Airport / Infrastructure &amp; Airfield Responsibilities</p><ul><li>Support quality management across airport terminals, airfield infrastructure, runways, taxiways, aprons, roads, utilities, district cooling, and associated infrastructure works.</li><li>Monitor quality requirements associated with critical airport and airfield systems.</li><li>Support audits and surveillance activities for specialist aviation and infrastructure works.</li><li>Ensure quality requirements for airside and landside works are appropriately implemented.</li><li>Support quality assurance during phased construction and complex interface activities.</li><li>Monitor compliance with project-specific airport, aviation, infrastructure, and authority requirements.</li></ul><p>Quality Performance &amp; Reporting</p><ul><li>Develop and maintain quality performance dashboards and reports.</li><li>Monitor key quality indicators, including: NCRs, Observations, Audit Findings, First-Time Pass Rate, Inspection Performance, Test Failures, Rework, Corrective Action Closure, Quality Trends.</li><li>Identify areas of poor quality performance and recommend improvement initiatives.</li><li>Provide data-driven recommendations to Project Quality Management and senior leadership.</li><li>Prepare weekly and monthly quality reports.</li><li>Support management reviews and quality performance presentations.</li></ul><p><strong>Desired Candidate Profile</strong></p><p>Bachelor's Degree in Engineering, Quality Management, Construction Management, or a related discipline.</p><p>Minimum of 10 years of relevant experience in project quality management, QA/QC, quality assurance, or quality control.</p><p>Strong experience on major construction, infrastructure, airport, or multidisciplinary projects.</p><p>Proven experience implementing and monitoring Project Quality Management Systems.</p><p>Strong experience with audits, inspections, NCR management, corrective actions, and quality performance monitoring.</p><p>Experience working with Clients, Consultants, Contractors, and specialist subcontractors.</p><p>Strong knowledge of ISO 9001 and quality management principles.</p><p>Experience with engineering and construction quality processes is highly desirable.</p><p>Strong knowledge of quality documentation, ITPs, Method Statements, inspection procedures, and testing requirements.</p><p>Experience on airport / airfield projects is preferred.</p><p>ISO 9001 Lead Auditor or equivalent quality certification is preferred.</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>We are seeking an experienced Electrical Inspector with strong expertise in Electrical Systems, ELV (Extra Low Voltage), and ICT Infrastructure to support the Program Management and Construction Management (PMCM) team on the prestigious project in Riyadh.</p><br><p>The successful candidate will be responsible for inspecting, monitoring, and ensuring that all electrical, ELV, and ICT installation works are executed in compliance with project specifications, applicable codes, quality standards, and approved construction drawings.</p><br><br><br>Responsibilities:<br><ul><li>Conduct site inspections for electrical, ELV, and ICT works to ensure compliance with approved drawings, specifications, and project requirements.</li><li>Monitor installation and testing activities related to:<ul><li>Power distribution systems</li><li>Lighting systems</li><li>Earthing and lightning protection systems</li><li>Structured cabling systems</li><li>Data and communication networks</li><li>CCTV systems</li><li>Access control systems</li><li>Public Address (PA) systems</li><li>Audio Visual (AV) systems</li><li>Building Management Systems (BMS)</li><li>Fire Alarm and Security Systems</li></ul></li><li>Review contractor inspection requests (IRs), material submittals, shop drawings, and method statements.</li><li>Verify quality of workmanship and ensure adherence to project quality standards.</li><li>Identify deficiencies, issue non-conformance reports (NCRs), and monitor corrective actions.</li><li>Witness testing and commissioning activities and maintain inspection records.</li><li>Coordinate with contractors, consultants, and project stakeholders to resolve technical issues.</li><li>Ensure compliance with relevant Saudi regulations, international codes, health, safety, and environmental requirements.</li><li>Prepare daily, weekly, and monthly inspection reports.</li></ul><br><br>Qualifications:<br><ul><li>Bachelor's Degree or Diploma in Electrical Engineering or a related discipline.</li><li>Minimum 8–10 years of experience in electrical inspection, with significant exposure to ELV and ICT systems.</li><li>Experience working on large-scale infrastructure, mixed-use, commercial, hospitality, or mega projects.</li><li>Prior experience in a PMCM/Consultancy environment is highly preferred.</li><li>Strong knowledge of international standards, including IEC, NFPA, IEEE, TIA/EIA, and relevant Saudi regulations.</li><li>Excellent communication and reporting skills.</li><li>Proficient in reading and interpreting construction drawings and technical specifications.</li></ul><strong>Candidates who are currently available in Saudi Arabia and can join immediately or within a short notice period will be given preference.</strong><br><p><span>Imagine a better future for you and a better future for us all.</span></p><br><p><span>Join our close-knit community of talented individuals who share your passion for making a positive impact. Our global team includes more than 69,000 employees, working together to make a difference in communities both close to home and around the world.</span></p><br><p><span>With us, you can. Apply today.</span></p><br><br> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> No experience required </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

SECTION I: Job Summary <br><br>The QC Inspector - Structural performs inspection and testing of structural steel fabrication and erection activities to verify compliance with drawings, specifications, and applicable codes and standards.<br><br>SECTION II: Job Analysis <br><br>Duties & Responsibilities<br><br> Perform in-process and final inspections on structural steel fabrication and erection works Witness structural bolting, welding, and alignment checks per the ITP Verify structural steel installation against approved drawings, erection plans, and tolerances Verify materials (structural steel, bolts, coatings) against material certificates and specifications Record inspection results and raise Non-Conformance Reports as required Coordinate hold points and inspections with client/third-party inspectors Maintain inspection records, checklists, and daily QC reports Verify calibration status of measuring and test equipment used on site Support punch-list generation and verification of closure for structural works Ensure work fronts comply with approved method statements and structural codes (AISC, etc.) Support preparation of quality documentation for structural handover dossiers<br><br>Requirements<br><br>SECTION III: Performance Indicators<br><br>Evaluated Based on<br><br> Inspection accuracy and completeness Timely identification and reporting of non-conformances First-time inspection pass rate on assigned work fronts Adherence to inspection schedules/hold points Quality of inspection documentation<br><br>SECTION IV: Required Skills & Abilities <br><br>Core Competencies<br><br>Attention to Detail Integrity Analytical Thinking Communication Skills Time Management<br><br>Technical Skills<br><br> Structural Steel Inspection Techniques Reading Structural/Erection Drawings Bolting & Welding Inspection Standards (Structural) Inspection & Test Plans (ITPs) Measuring & Alignment Equipment Use QC Documentation & Reporting<br><br>SECTION V: Required Experience and Education <br><br>Experience<br><br> 5-8 years of experience as a QC Inspector on structural steel construction projects<br><br>Education<br><br> Diploma or Bachelor's degree in Civil/Structural Engineering QC/inspection certification preferred

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>To ensure that all workshop activities comply with client specifications, applicable standards, quality requirements, and HSE regulations. The role is responsible for inspecting incoming materials, monitoring production quality, maintaining quality documentation, enforcing safety requirements, and supporting internal and external audits in accordance with ISO 9001 and client requirements (e.g., Saudi Aramco).</p><p><br></p><p><b>Key Responsibilities</b></p><ul><li>Inspect incoming materials and verify Material Test Certificates (MTCs).</li><li>Prepare material receiving, rejection, replacement, and inspection reports.</li><li>Conduct in-process and final inspections.</li><li>Issue and follow up Non-Conformance Reports (NCRs) and corrective actions.</li><li>Prepare and maintain quality records, Inspection &amp; Test Plans (ITPs), and project quality dossiers.</li><li>Ensure measuring equipment is calibrated and calibration records are maintained.</li><li>Support ISO 9001 implementation and internal/external audits.</li><li>Review welding, coating, and NDT documentation, where applicable.</li><li>Ensure compliance with HSE policies and client safety requirements.</li><li>Conduct safety inspections, monitor PPE compliance, report hazards, and maintain HSE records.</li><li>Coordinate with production, clients, inspectors, and subcontractors to ensure quality and safety compliance.</li></ul><p><br></p><p><b>Qualifications</b></p><ul><li>Diploma or Bachelor's degree in Engineering or a related field.</li><li>3+ years of experience in QA/QC and HSE within steel fabrication or manufacturing.</li><li>Experience with major industrial clients (e.g., Saudi Aramco) is an advantage.</li></ul><p><br></p><p><br></p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p><b>Preferred Certifications</b></p><ul><li>ISO 9001 Internal Auditor</li><li>QA/QC Inspector</li><li>OSHA 30-Hour or IOSH</li><li>First Aid</li><li>H2S Awareness</li><li>Welding Inspection (preferred)</li></ul><p><br></p></div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><strong><span>Fire Inspector – As Shamli, Hail, Saudi Arabia</span></strong></p><br><br> <br> <p><strong><span>The Company:</span></strong></p><br><br> <p><span>Almarai is the world’s largest vertically integrated dairy and the region’s largest food and beverage manufacturing and distribution company. Headquartered in the Kingdom of Saudi Arabia, Almarai Company is ranked as the #1 FMCG Brand in the MENA region and is a market leader in all its categories across the GCC. Almarai currently employs over 46,000 Quality Makers, across the GCC, Egypt &amp; Jordan. In 2025, Almarai reported net income of SAR 2.4 billion on sales of SAR 22 billion. For more details, please visit our website –www.almarai.com.</span></p><br><br> <br> <p><span>An aggressive expansion program together with acquisitions in new vertical markets have created an exciting opportunity to join a dynamic multinational team dedicated to furthering growth plans for the group.</span></p><br><br> <br> <p><strong><span>About the Role:</span></strong></p><br><br> <p><span>We are seeking a proactive and detail-oriented <strong>Fire Inspector</strong> to join our Poultry Division. The successful candidate will support fire prevention programs, conduct safety inspections, monitor fire protection systems, and help maintain a safe working environment across facilities. This role is ideal for candidates with 1-2 years of experience in fire safety, emergency response, or occupational safety.</span></p><br><br> <br> <p><strong><span>Key Responsibilities</span></strong></p><br><br> <ul> <li><span>Conduct routine fire and safety inspections of buildings, equipment, and work areas.</span></li> <li><span>Identify fire hazards and recommend corrective actions.</span></li> <li><span>Support the maintenance and testing of fire detection and suppression systems.</span></li> <li><span>Assist in conducting fire drills and emergency evacuation exercises.</span></li> <li><span>Ensure compliance with fire safety regulations, standards, and company policies.</span></li> <li><span>Prepare inspection reports, incident reports, and safety documentation.</span></li> <li><span>Monitor the condition and availability of firefighting equipment.</span></li> <li><span>Participate in fire risk assessments and safety improvement initiatives.</span></li> <li><span>Deliver basic fire prevention awareness and training to employees.</span></li> <li><span>Coordinate with emergency response teams during incidents and emergencies. </span></li> </ul> <br> <p><strong><span>Qualifications &amp; Experience</span></strong></p><br><br> <ul> <li><span>Bachelor's Degree or Diploma in Fire Safety, Occupational Health &amp; Safety, Engineering, or a related field.</span></li> <li><span>Fire Safety, IOSH, NEBOSH, or equivalent certification.</span></li> <li><span>1-2 years of experience in fire safety, fire inspection, firefighting, or emergency response.</span></li> <li><span>Knowledge of fire detection and suppression systems.</span></li> <li><span>Good understanding of fire prevention and emergency response procedures.</span></li> <li><span>Ability to prepare reports and maintain inspection records.</span></li> <li><span>Good communication skills in English.</span></li> <li><span>Physically fit and capable of responding to emergency situations.</span></li> <li><span>Proficiency in Microsoft Office applications.</span></li> </ul> <br> <p><span>This is a great opportunity to join a successful and expanding global business, offering an excellent remuneration and benefits package.</span></p><br><br> <br> <p><span>Almarai offers a competitive package, generous leave, medical coverage, discretionary bonus, training, and development etc.</span></p><br><br> <br> <br><br> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> No experience required </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><strong><span>Fire Inspector – As Shamli, Hail, Saudi Arabia</span></strong></p><br><br> <br> <p><strong><span>The Company:</span></strong></p><br><br> <p><span>Almarai is the world’s largest vertically integrated dairy and the region’s largest food and beverage manufacturing and distribution company. Headquartered in the Kingdom of Saudi Arabia, Almarai Company is ranked as the #1 FMCG Brand in the MENA region and is a market leader in all its categories across the GCC. Almarai currently employs over 46,000 Quality Makers, across the GCC, Egypt &amp; Jordan. In 2025, Almarai reported net income of SAR 2.4 billion on sales of SAR 22 billion. For more details, please visit our website –www.almarai.com.</span></p><br><br> <br> <p><span>An aggressive expansion program together with acquisitions in new vertical markets have created an exciting opportunity to join a dynamic multinational team dedicated to furthering growth plans for the group.</span></p><br><br> <br> <p><strong><span>About the Role:</span></strong></p><br><br> <p><span>We are seeking a proactive and detail-oriented <strong>Fire Inspector</strong> to join our Poultry Division. The successful candidate will support fire prevention programs, conduct safety inspections, monitor fire protection systems, and help maintain a safe working environment across facilities. This role is ideal for candidates with 1-2 years of experience in fire safety, emergency response, or occupational safety.</span></p><br><br> <br> <p><strong><span>Key Responsibilities</span></strong></p><br><br> <ul> <li><span>Conduct routine fire and safety inspections of buildings, equipment, and work areas.</span></li> <li><span>Identify fire hazards and recommend corrective actions.</span></li> <li><span>Support the maintenance and testing of fire detection and suppression systems.</span></li> <li><span>Assist in conducting fire drills and emergency evacuation exercises.</span></li> <li><span>Ensure compliance with fire safety regulations, standards, and company policies.</span></li> <li><span>Prepare inspection reports, incident reports, and safety documentation.</span></li> <li><span>Monitor the condition and availability of firefighting equipment.</span></li> <li><span>Participate in fire risk assessments and safety improvement initiatives.</span></li> <li><span>Deliver basic fire prevention awareness and training to employees.</span></li> <li><span>Coordinate with emergency response teams during incidents and emergencies. </span></li> </ul> <br> <p><strong><span>Qualifications &amp; Experience</span></strong></p><br><br> <ul> <li><span>Bachelor's Degree or Diploma in Fire Safety, Occupational Health &amp; Safety, Engineering, or a related field.</span></li> <li><span>Fire Safety, IOSH, NEBOSH, or equivalent certification.</span></li> <li><span>1-2 years of experience in fire safety, fire inspection, firefighting, or emergency response.</span></li> <li><span>Knowledge of fire detection and suppression systems.</span></li> <li><span>Good understanding of fire prevention and emergency response procedures.</span></li> <li><span>Ability to prepare reports and maintain inspection records.</span></li> <li><span>Good communication skills in English.</span></li> <li><span>Physically fit and capable of responding to emergency situations.</span></li> <li><span>Proficiency in Microsoft Office applications.</span></li> </ul> <br> <p><span>This is a great opportunity to join a successful and expanding global business, offering an excellent remuneration and benefits package.</span></p><br><br> <br> <p><span>Almarai offers a competitive package, generous leave, medical coverage, discretionary bonus, training, and development etc.</span></p><br><br> <br> <br><br> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> No experience required </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

<h3 >About the Role</h3> <p >SNC-Lavalin Fayez Engineering is seeking a <strong >Lead MEP Manager</strong> for a full-time position. This role involves acting as the Consultant's representative on-site, overseeing all Mechanical, Electrical, and Plumbing (MEP) supervision activities for large-scale buildings, mixed-use developments, and theme park projects. The Lead MEP Manager ensures that all MEP works comply with contract requirements, approved designs, quality standards, project schedules, and regulatory mandates.</p> <h3 >Role Context and Objectives</h3> <p >The primary objective of this role is to lead and manage the comprehensive supervision of MEP installations and systems. This includes coordinating with multidisciplinary stakeholders throughout the project lifecycle to ensure seamless integration and execution. The Lead MEP Manager will play a critical role in maintaining project integrity and adherence to technical and quality specifications.</p> <h3 >Key Responsibilities</h3> <ul > <li >Lead site supervision for all MEP works, including HVAC, electrical, plumbing, fire protection, ELV, and specialist systems.</li> <li >Ensure contractor compliance with approved drawings, specifications, method statements, and project standards.</li> <li >Manage and coordinate MEP interfaces with architectural, structural, fit-out, and themed attraction works.</li> <li >Review and provide technical comments on shop drawings, material submittals, RFIs, and design changes.</li> <li >Monitor construction progress and identify potential risks affecting cost, quality, or schedule.</li> <li >Conduct site inspections to ensure works comply with project specifications and applicable codes.</li> <li >Lead testing, commissioning, integrated systems testing, and handover activities.</li> <li >Coordinate with contractors, specialist vendors, ride suppliers, and themed entertainment contractors.</li> <li >Review contractor claims, variation orders, and progress reports.</li> <li >Verify completed works and provide recommendations for payment certifications.</li> <li >Ensure the implementation of QA/QC procedures and HSE requirements across all MEP activities.</li> <li >Attend client, consultant, and contractor meetings, providing technical leadership on project delivery matters.</li> <li >Support the Resident Engineer and Project Director in managing project objectives and resolving technical challenges.</li> </ul> <h3 >Qualifications and Experience</h3> <ul > <li >A minimum of <strong >5 to 10 years</strong> of relevant experience in MEP supervision for large-scale building, mixed-use, or theme park projects.</li> <li >Demonstrated ability to lead and manage MEP supervision activities effectively.</li> <li >Strong understanding of contract requirements, design specifications, quality standards, and regulatory compliance.</li> </ul> <h3 >Work Type</h3> <p >This is a <strong >full-time</strong> position.</p> <h3 >Application Process</h3> <p >Candidates who meet the outlined qualifications are encouraged to apply.</p>

<p>In a world of possibilities, pursue one with endless opportunities. Imagine Next! At Parsons, you can imagine a career where you thrive, work with exceptional people, and be yourself. Guided by our leadership vision of valuing people, embracing agility, and fostering growth, we cultivate an innovative culture that empowers you to achieve your full potential. Unleash your talent and redefine what s possible.</p><p>Parsons is looking for an amazingly talented Quality Specialist to join our team! In this role you will get to support and implement quality management activities across assigned projects and programs, ensuring that engineering, construction, procurement, and project delivery activities comply with Parsons' Quality Management System, client requirements, applicable standards, and approved project procedures. You will conduct audits, monitor compliance, manage corrective actions and non-conformances, and work closely with multidisciplinary project teams to promote consistent quality performance and continuous improvement.</p><ul><li>Support implementation and maintenance of the Parsons Quality Management System across assigned projects, programs, and functional areas.</li><li>Establish and maintain project-specific Quality Management Systems, processes, procedures, and controls.</li><li>Prepare and maintain Project Quality Plans, quality manuals, procedures, inspection requirements, audit schedules, and supporting documentation.</li><li>Conduct independent quality audits across engineering, design, procurement, construction, and other project activities.</li><li>Develop audit plans and checklists, review relevant documentation, witness activities, document findings, and prepare comprehensive audit reports.</li><li>Monitor project activities to verify compliance with Parsons requirements, client quality requirements, contractual obligations, and approved procedures.</li><li>Analyze audit findings, inspection results, and quality performance data to identify trends, recurring issues, and opportunities for improvement.</li><li>Manage and monitor Non-Conformance Reports (NCRs), Corrective Actions, and Preventive Actions (CAPA) through appropriate investigation, implementation, verification, and closure.</li><li>Promote consistent corrective and preventive action processes across project teams, contractors, consultants, and suppliers.</li><li>Review quality documentation prepared by internal teams, consultants, contractors, suppliers, and other external organizations.</li><li>Review and provide quality input on method statements, procedures, inspection and test plans, quality plans, and other project documentation as applicable.</li><li>Support project and program management in resolving quality-related issues and implementing effective corrective actions.</li><li>Support client pre-bid, bid, contract planning, and project mobilization activities from a quality perspective as directed.</li><li>Monitor compliance with applicable ISO 9001 Quality Management System requirements and other relevant industry standards.</li><li>Support quality surveillance and verification activities across project and construction operations.</li><li>Assist project teams in developing and improving processes to achieve consistent quality outcomes.</li><li>Collect, analyze, and report quality performance data, including audit findings, NCRs, corrective actions, trends, and key quality indicators.</li><li>Apply statistical process control and other quality analysis techniques where appropriate.</li><li>Prepare periodic quality reports, dashboards, presentations, and management updates.</li><li>Support quality-related risk assessments and identify potential areas of non-compliance or performance concern.</li><li>Participate in project meetings, quality reviews, coordination meetings, and client discussions as required.</li><li>Coordinate with Project Management, Engineering, Design, Procurement, Construction, HSE, contractors, consultants, suppliers, and client representatives on quality matters.</li><li>Support Quality Management System training and awareness activities for project personnel.</li><li>Provide technical guidance and support to junior Quality personnel and Quality Analysts as required.</li><li>Promote a culture of quality, accountability, lessons learned, and continuous improvement across the project.</li><li>Perform other responsibilities associated with this position as appropriate.</li></ul><p><strong>Desired Candidate Profile</strong></p><p>Bachelor's Degree in Engineering, Construction Management, Project Management, Quality Management, Business, or a related discipline.</p><p>Minimum 4+ years of relevant experience in Quality Assurance, Quality Control, Quality Management, engineering, construction, or a related field.</p><p>Strong working knowledge of Quality Management Systems (QMS), quality assurance principles, processes, and industry practices.</p><p>Working knowledge of ISO 9001 Quality Management System requirements and their practical application within project environments.</p><p>Experience establishing, implementing, or supporting project Quality Plans, procedures, audit programs, and quality processes.</p><p>Experience conducting internal, external, project, supplier, or contractor quality audits.</p><p>Ability to prepare audit plans, checklists, findings, observations, and formal audit reports.</p><p>Experience managing Non-Conformance Reports (NCRs), Corrective Actions, and Preventive Actions (CAPA).</p><p>Ability to analyze root causes, quality trends, recurring deficiencies, and process performance.</p><p>Experience reviewing technical and quality documentation for compliance with contractual and procedural requirements.</p><p>Knowledge of applicable quality standards and industry requirements such as ISO, ASME, ANSI, ASTM, or equivalent standards relevant to the assigned project.</p><p>Understanding of engineering, procurement, construction, and project delivery processes.</p><p>Ability to interface effectively with project management, engineering, procurement, construction, contractors, suppliers, and clients.</p><p>Strong analytical, problem-solving, risk assessment, and decision-making skills.</p><p>Ability to collect and analyze quality data and develop meaningful performance reports.</p><p>Strong attention to detail and ability to identify potential quality and compliance issues.</p><p>Excellent written and verbal communication skills.</p><p>Strong presentation and interpersonal skills with the ability to communicate quality requirements effectively across multidisciplinary teams.</p><p>Proficiency in Microsoft Office, including Word, Excel, and PowerPoint.</p><p>Ability to work independently while contributing effectively within a multidisciplinary project team.</p><p>Certified ISO 9001 Lead Auditor, or ability to obtain certification within six months of hire.</p><p>ASQ Certified Quality Engineer (CQE) or other relevant ASQ certification such as CQA or CMQ/OE, or ability to obtain within six months of hire.</p><p>Membership in a nationally or internationally recognized Quality organization.</p><p>Experience working on major infrastructure, transportation, buildings, utilities, industrial, or large-scale construction programs.</p><p>Experience within PMC, Delivery Partner, consultancy, EPC, or client-side project environments.</p><p>Experience conducting contractor, consultant, supplier, or subcontractor quality audits.</p><p>Strong knowledge of quality surveillance, inspection, testing, and construction quality processes.</p><p>Experience developing quality dashboards, KPIs, trend analyses, and management reports.</p><p>Knowledge of statistical process control and data-driven quality improvement techniques.</p><p>Experience supporting continuous improvement, lessons learned, and process optimization initiatives.</p><p>Familiarity with digital Quality Management Systems, document management platforms, and project collaboration tools.</p><p>Additional relevant certifications such as Certified Building Inspector, NDT/ASNT, AWS Certified Welding Inspector, NQA-1 Auditor, or equivalent are advantageous where relevant to the project.</p><p>Strong stakeholder management skills and ability to work effectively with clients, contractors, consultants, suppliers, and multidisciplinary teams.</p><p>Ability to provide technical guidance and mentoring to junior Quality personnel.</p><p>Commitment to quality excellence, compliance, accountability, and continuous improvement.</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>1. Job Purpose</b> </p><p>The QA/QC Manager will be responsible for establishing, implementing and maintaining the company's <b>Quality Management System (QMS) </b>and ensuring that all HVAC products manufactured by the company comply with:</p><p>• Saudi Aramco requirements and approved vendor requirements </p><p>• Approved project specifications and Inspection &amp; Test Plans (ITPs) </p><p>• Applicable international standards and codes </p><p>• Customer-approved drawings and technical submittals </p><p>• Approved manufacturing procedures and work instructions </p><p>• Contractual quality requirements </p><p>• ISO 9001 requirements</p><p> The position will have overall responsibility for <b>Quality Assurance, Quality Control, inspection, testing, documentation, non-conformance management and continuous improvement</b> throughout the manufacturing process.</p><p><br></p><p><b>2. Key Responsibilities</b></p><p><b>A. Quality Management System</b></p><p>• Establish, implement and continuously improve the company's <b>ISO 9001-based QMS</b></p><p>• Maintain the Quality Manual, procedures, work instructions, inspection formats and quality records. </p><p>• Ensure effective implementation of:</p><p>o Document Control </p><p>o Record Control </p><p>o Internal Audit </p><p>o Corrective &amp; Preventive Action </p><p>o Non-Conformance Control </p><p>o Customer Complaint Management </p><p>o Supplier Quality Management </p><p>o Calibration Management </p><p>o Training &amp; Competency</p><p>• Establish measurable Quality Objectives and KPIs. </p><p>• Conduct periodic management reviews and report quality performance to senior management. </p><p>• Ensure QMS effectiveness across Engineering, Procurement, Production, Testing, Stores and Dispatch.&nbsp;</p><p><b>B. Saudi Aramco Quality Requirements</b> </p><p>• Ensure compliance with applicable <b>Saudi Aramco Engineering Standards, Material System Specifications, project specifications and approved vendor requirements. </b></p><p>• Maintain readiness for Saudi Aramco technical and quality audits/inspections. </p><p>• Coordinate with Aramco, clients, consultants, third-party inspectors and certification bodies. </p><p>• Prepare and maintain documentation required for technical and quality approval. </p><p>• Ensure products are manufactured only against approved drawings, specifications and applicable material numbers. </p><p>• Coordinate responses to inspection observations, NCRs and audit findings. </p><p>• Ensure timely closure of corrective actions.</p><p>Saudi Aramco may conduct factory assessments to evaluate the manufacturer's QMS and its capability to produce materials/equipment meeting applicable Aramco specifications.&nbsp;</p><p><b>C. HVAC Product Quality Control</b> </p><p>Establish inspection and testing controls for products. </p><p>Ensure inspection at:</p><p><b>Incoming Material → In-Process Manufacturing → Assembly → Testing → Final Inspection → Packing → Dispatch</b></p><p><b>D. Incoming Material Inspection</b> </p><p>Develop and implement incoming inspection procedures for raw materials. </p><p>Verify: </p><p>• Material certificates </p><p>• Manufacturer certificates </p><p>• Dimensions </p><p>• Thickness </p><p>• Grade </p><p>• Coating/galvanization </p><p>• Quantity </p><p>• Approved manufacturer/source </p><p>• Purchase specification compliance </p><p><b>E. In-Process Quality Control</b> </p><p>Establish inspection checkpoints for HVAC manufacturing processes including:</p><p>Ensure that <b>quality hold points and witness</b> points defined in ITPs are properly implemented. </p><p><b>F. Testing &amp; Final Inspection</b> </p><p>Develop and control final inspection and testing procedures for products. </p><p>Coordinate client’s third-party inspections where required.</p><p><br></p><p><b>3. Inspection &amp; Test Plans </b></p><p>The QA/QC Manager shall: </p><p>• Develop and approve <b>Inspection &amp; Test Plans (ITPs).</b> </p><p>• Establish inspection stages, acceptance criteria, responsible personnel and required records. </p><p>• Define <b>Hold Points (H), Witness Points (W), Review Points (R) </b>and surveillance requirements where applicable. </p><p>• Ensure inspections are carried out against approved drawings and specifications. </p><p>• Maintain traceability of inspection results to individual equipment/unit serial numbers</p><p><br></p><p><b>4. NCR &amp; Corrective Action Management</b></p><p>• Identify and control non-conforming products/materials. </p><p>• Issue and manage NCRs. </p><p>• Perform root-cause analysis using appropriate techniques. </p><p>• Establish corrective and preventive actions. </p><p>• Verify effectiveness of corrective actions. </p><p>• Maintain NCR and CAPA databases. </p><p>• Monitor recurring defects and implement preventive measures.</p><p><br></p><p><b>5. Supplier &amp; Subcontractor Quality </b></p><p>• Establish supplier qualification and evaluation procedures. </p><p>• Conduct supplier quality audits where required. </p><p>• Review supplier Quality Plans and ITPs. </p><p>• Verify supplier certificates and test reports. </p><p>• Monitor supplier NCRs and recurring quality issues. </p><p>• Maintain an Approved Supplier List. </p><p>• Coordinate third-party inspection of critical components.</p><p><br></p><p><b>6. Calibration &amp; Measuring Equipment</b> </p><p>Maintain the company's calibration system for all instruments and equipment applicable for&nbsp;production. </p><p>Ensure all measuring and test equipment has valid calibration certificates traceable to appropriate standards</p><p><br></p><p><b>7. Documentation &amp; Quality Records</b> </p><p>Ensure complete and controlled preparation of: </p><p>Ensure complete <b>equipment traceability from raw material through final delivery</b></p><p><br></p><p><b>8. Audits </b></p><p>Plan and conduct: </p><p>• Internal QMS audits </p><p>• Manufacturing process audits </p><p>• Product audits </p><p>• Supplier audits </p><p>• Customer audits </p><p>• Certification audits </p><p>• Saudi Aramco inspections/audits Lead preparation for external audits and ensure timely closure of audit findings.</p><p><br></p><p><b>9. Quality Improvement</b> </p><p>Develop quality KPIs. </p><p>Use quality data to reduce rework, scrap, warranty claims and customer complaints</p><p><br></p><p><b>10. Team Management </b></p><p>Lead and develop the QA/QC team.</p><p><br></p><p><b>11. Minimum Qualifications </b></p><p><b>Education </b></p><p>• Bachelor's degree in Mechanical Engineering, Industrial Engineering, Production Engineering or equivalent. </p><p><b>Certifications</b> </p><p>Preferably: </p><p>• ISO 9001 Lead Auditor </p><p>• ISO 9001 Internal Auditor </p><p>• Quality Management certification</p><p><br></p><p><b>12. Experience </b></p><p><b>Recommended: 7+ years total experience</b>, including significant experience in: </p><p>• HVAC manufacturing (not mandatory) or any Manufacturing background </p><p>• Sheet-metal manufacturing </p><p>• Engineering equipment manufacturing </p><p>• QA/QC </p><p>• QMS implementation </p><p>• Supplier quality </p><p>• Inspection and testing&nbsp;</p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p><b> Inspection &amp; Test Plans </b></p><p>The QA/QC Manager shall:</p><p>• Develop and approve <b>Inspection &amp; Test Plans (ITPs).</b></p><p>• Establish inspection stages, acceptance criteria, responsible personnel and required records.</p><p>• Define <b>Hold Points (H), Witness Points (W), Review Points (R) </b>and surveillance requirements where applicable.</p><p>• Ensure inspections are carried out against approved drawings and specifications.</p><p>• Maintain traceability of inspection results to individual equipment/unit serial numbers</p><p><br></p><p><b>NCR &amp; Corrective Action Management</b></p><p>• Identify and control non-conforming products/materials.</p><p>• Issue and manage NCRs.</p><p>• Perform root-cause analysis using appropriate techniques.</p><p>• Establish corrective and preventive actions.</p><p>• Verify effectiveness of corrective actions.</p><p>• Maintain NCR and CAPA databases.</p><p>• Monitor recurring defects and implement preventive measures.</p><p><br></p><p><b>Supplier &amp; Subcontractor Quality </b></p><p>• Establish supplier qualification and evaluation procedures.</p><p>• Conduct supplier quality audits where required.</p><p>• Review supplier Quality Plans and ITPs.</p><p>• Verify supplier certificates and test reports.</p><p>• Monitor supplier NCRs and recurring quality issues.</p><p>• Maintain an Approved Supplier List.</p><p>• Coordinate third-party inspection of critical components.</p><p><br></p><p><b>Calibration &amp; Measuring Equipment</b></p><p>Maintain the company's calibration system for all instruments and equipment applicable for production.</p><p>Ensure all measuring and test equipment has valid calibration certificates traceable to appropriate standards</p><p><br></p><p><b>Documentation &amp; Quality Records</b></p><p>Ensure complete and controlled preparation of:</p><p>Ensure complete <b>equipment traceability from raw material through final delivery</b></p><p><br></p><p><b>Audits </b></p><p>Plan and conduct:</p><p>• Internal QMS audits</p><p>• Manufacturing process audits</p><p>• Product audits</p><p>• Supplier audits</p><p>• Customer audits</p><p>• Certification audits</p><p>• Saudi Aramco inspections/audits Lead preparation for external audits and ensure timely closure of audit findings.</p><p><br></p><p><b>Quality Improvement</b></p><p>Develop quality KPIs.</p><p>Use quality data to reduce rework, scrap, warranty claims and customer complaints</p><p><br></p><p><b>Team Management </b></p><p>Lead and develop the QA/QC team.</p><p><br></p></div>