وظائف ذوي الاحتياجات الخاصة - الاحساء السعودية

We are seeking an experienced HSE Coordinator to support Health, Safety, and Environmental activities for Oil & Gas operations in the Eastern Province. The successful candidate will be responsible for coordinating and monitoring HSE activities, ensuring compliance with Saudi Aramco and project HSE requirements, and promoting a strong safety culture across operational sites. Candidates with experience in Rig/Drilling or Non-Rig Oil & Gas environments are encouraged to apply.<br>Key Responsibilities Coordinate and monitor the implementation of HSE policies, procedures, and project safety requirements. Ensure compliance with Saudi Aramco HSE standards, client requirements, and applicable regulations. Conduct regular HSE inspections, audits, and site safety assessments. Identify unsafe acts, unsafe conditions, and potential hazards and recommend corrective actions. Monitor and support the implementation of Permit to Work (PTW), Job Safety Analysis (JSA), and risk assessment processes. Participate in incident and accident investigations, including root cause analysis and corrective action follow-up. Prepare and maintain HSE reports, inspection reports, incident reports, and safety performance records. Coordinate and conduct safety inductions, toolbox talks, HSE awareness sessions, and safety training programs. Organize and participate in emergency response drills and ensure personnel are familiar with emergency procedures. Monitor the proper use of Personal Protective Equipment (PPE) and other HSE-critical equipment. Participate in safety meetings and communicate HSE alerts, lessons learned, and safety initiatives to employees. Follow up on observations, audit findings, and non-conformances to ensure timely closure of corrective actions. Promote a proactive safety culture and encourage reporting of unsafe acts and conditions. Coordinate with project management, supervisors, contractors, and client representatives on HSE-related matters. Monitor environmental compliance, waste management, spill prevention, and other environmental protection requirements.<br>Requirements Bachelor's Degree or Diploma in Occupational Health & Safety, Engineering, Environmental Science, or a related discipline. Minimum 5+ years of HSE experience in Oil & Gas, Petrochemical, Energy, Construction, Drilling, or Industrial projects. Previous experience working on Saudi Aramco projects is highly preferred. Saudi Aramco RTS approval/experience will be an added advantage. Experience in Rig/Drilling operations or Non-Rig Oil & Gas operations will be considered. Strong knowledge of Saudi Aramco HSE requirements, standards, and procedures. Good understanding of PTW, JSA, Risk Assessment, HAZID, Incident Investigation, and Emergency Response. Experience conducting HSE inspections, audits, toolbox talks, safety meetings, and training programs. NEBOSH IGC certification is highly preferred. Additional certifications such as IOSH, OSHA, ISO 45001, First Aid, H2S, Confined Space, or Fire Safety will be advantageous. Strong reporting, documentation, communication, and coordination skills. Ability to work independently in field and operational environments. Good command of English, both written and spoken.

Business Development Manager Location: Dammam, Saudi Arabia Industry: Recruitment & Staffing Services Experience: Minimum 5 Years Important: Only candidates with relevant Staffing/Recruitment/Manpower Supply industry experience in the Saudi market will be considered.<br>Key Responsibilities Identify and develop new business opportunities within the Saudi recruitment and staffing market. Generate qualified leads through cold calling, networking, referrals, industry events, market research, and direct client engagement. Conduct client meetings, presentations, and business discussions to understand workforce requirements. Present and promote recruitment, manpower supply, executive search, outsourcing, and workforce solutions. Prepare commercial proposals, quotations, and service agreements in line with client requirements. Negotiate commercial terms, pricing, and contracts and successfully close new business. Achieve monthly, quarterly, and annual business development, sales, and revenue targets. Build and maintain a healthy sales pipeline and ensure consistent follow-up with prospective clients. Collaborate closely with recruitment and operations teams to ensure successful delivery of client requirements. Manage recruitment and manpower projects sourced through local and international recruitment agencies and partners. Develop and maintain strategic partnerships with overseas recruitment agencies to support bulk hiring and international manpower requirements. Maintain accurate records of leads, client interactions, opportunities, proposals, and sales activities in the CRM. Required Qualifications & Experience Bachelor's Degree in Business Administration, Marketing, Human Resources, or a related field. Minimum 5 years of proven Business Development/Sales experience specifically within the Recruitment, Staffing, Manpower Supply, or Workforce Solutions industry. Mandatory experience in the Saudi Arabian recruitment/staffing market. Strong understanding of the Saudi recruitment and manpower supply landscape. Proven track record of generating new clients and closing recruitment/staffing contracts. Existing corporate network in Dammam and the Eastern Province of Saudi Arabia.

Department: Rooms Division, Front Office & Guest Services Location: Saudi Arabia - Al Khobar<br><br>Description<br><br>The Director of Rooms is responsible to ensure the smooth and efficient running of all operational aspects of Rooms Division related departments (Front Office, Housekeeping, Laundry, Spa, Recreation etc.) and to ensure that the various departments are run according to the standards set for the brand in general and the hotel specifically.<br><br><br><br>Key Responsibilities<br><br>Participate in development and preparation of hotel’s strategic plan.<br>Preparation of budget and monitoring of revenues.<br><br>Profit and loss responsibility.<br><br>Coordinate with Revenue Management and Sales to maximize room occupancy, rates and profits.<br><br>Optimize revenue by sales-promoting activities and collaborating with Revenue Management in order to achieve the best possible Revenue Penetration Market Share in the market.<br><br>Control the duty roster for sub-departments guaranteeing quality as well as highest personnel cost efficiency.<br>Oversee all labour cost controls within budget limits and occupancy variances to maximize productivity.<br><br>Conduct interviews with potential candidates.<br><br>Manage all operational tasks including their delegation and follow-up.<br><br>Re-evaluate work flows to improve and optimize organisation.<br><br>Implement and evaluate procedures and policies.<br><br>Ensure clear communications with all other department heads.<br><br>Create career development plans for all employees who are either part of the Talent Pool or High Potentials.<br><br>Regularly organize departmental meetings.<br><br>Communicate management strategy and targets to department heads and line staff and ensure implementation.<br><br>Ensure and communicate up-to-date procedures for all safety relevant measures with the Fire & Safety team.<br><br>Conduct daily walk throughs to ensure quality standards and cleanliness in front and back of the house areas.<br><br>Check the technical situation of the departments in Rooms Divisions.<br><br>Maintain a high visibility with guests and employees.<br><br>Responsible for maintaining 85% score during LQA inspections.<br><br>Pre-opening tasks and responsibilities where applicable.<br><br>Additional responsibilities and tasks can be added at any time according to the needs of the business and of the hotel.<br><br><br><br><br><br><br><br><br><br>Skills, Knowledge and Expertise<br><br>Arabic speaker with a minimum of 2 years of experience in the same position.

General Description of Role and Responsibilities:<br>Act as the PMC representative for all QA/QC matters, coordinating between the contractor, client, and supervision team during project execution. Review the Programme-wide quality management plan provided by the client and develop, manage, and update a project-specific Quality Management Strategy and Plan in coordination with the Project Director. Establish project QA/QC procedures that integrate with programme-wide standards and Hill procedures. Monitor and report on project non-conformances and issue Non-Conformance Reports (NCRs) as required. Administer the quality assurance and quality control regime across all project works. Oversee and report on the progress of construction works with respect to quality compliance. Provide QA/QC input to the project’s weekly, monthly, and executive reports. Manage and coordinate with the Construction Supervision Consultant (CSC) to review inspections, monitor work quality, track deficiency corrections, issue NCRs, and verify acceptance of completed work. Conduct regular QA/QC meetings to review compliance, address gaps, and formulate corrective action items. Ensure the PMC Performance Management Framework (PMF) for quality is effectively implemented, achieving KPIs and milestone targets. Provide oversight of the main contractor’s delivery of quality throughout all phases, including construction, fit-out, and commissioning. Participate in project close-out activities to verify quality documentation and compliance with approved plans. Ensure adherence to Hill International’s Quality, Environmental, Safety, and Occupational Health policies and procedures. Perform other duties as assigned by the Project Director or line manager.<br>Qualifications, Experience, Knowledge and Skills:<br>Bachelor’s degree in engineering or equivalent. At least 12 years of experience in quality management of civil works. Qualified and experienced Lead Auditor/ISO 9001 Lead Assessor. Ability to work well under pressure and tight deadlines. Excellent command of written and spoken English. Strong leadership and interpersonal skills.

<div dir="rtl"><h3 >نبذة عن الدور</h3> <p >تعلن شركة زومان محمد الهاجري وشركاه للمقاولات عن حاجتها لتوظيف <strong >مهندس سلامة وصحة مهنية</strong> للعمل بدوام كامل في مدينة الأحساء بالمنطقة الشرقية. يهدف هذا الدور إلى الإشراف على إعداد وتطوير أسس وإجراءات السلامة والصحة المهنية في مواقع العمل، وتحديد الأخطار المحتملة، وضمان توفير واستخدام مستلزمات السلامة، بالإضافة إلى إعداد الوثائق والتقارير المتخصصة بنتائج الأعمال. تتطلب الوظيفة خبرة تتراوح من 0 إلى 1 سنة.</p> <h3 >المهام والمسؤوليات الرئيسية</h3> <ul > <li >إعداد وتطوير أسس وإجراءات وتعليمات السلامة والصحة المهنية، بما في ذلك سياسات السلامة وتعليمات العمل الآمن والإخلاء ولجان السلامة وسجلات الفحص الطبي، ومتابعة اعتمادها والالتزام بها.</li> <li >تحديد مكامن الأخطار الميكانيكية والكهربائية والكيميائية في موقع العمل ووضع الإشارات والملصقات التحذيرية المناسبة.</li> <li >إعداد قوائم ببنود وكميات ومواصفات معدات ومستلزمات السلامة والصحة المهنية، ومتابعة توفيرها والتزام العاملين باستخدامها.</li> <li >تطوير أساليب وإجراءات العمل ومواكبة التطورات التقنية في مجال السلامة والصحة المهنية.</li> <li >إعداد الوثائق والتقارير المتخصصة المتعلقة بالأعمال والمشروعات الهندسية ونسب تقدمها، وعرضها وتوضيحها وحفظها في قاعدة البيانات الخاصة بها وفقاً للسياسات والإجراءات المعتمدة.</li> </ul> <h3 >متطلبات الخبرة</h3> <p >يتطلب هذا الدور خبرة عملية تتراوح من <strong >0 إلى 1 سنة</strong> في مجال السلامة والصحة المهنية أو في مجال هندسي ذي صلة.</p> <h3 >المعرفة والقدرات الأساسية</h3> <ul > <li >فهم شامل لأسس وقواعد وإجراءات السلامة والصحة المهنية.</li> <li >القدرة على تحديد وتقييم الأخطار المهنية وتطوير إجراءات الوقاية منها.</li> <li >مهارات قوية في إعداد الوثائق والتقارير الفنية وحفظها.</li> <li >القدرة على متابعة التطورات التقنية وتطبيقها لتحسين إجراءات العمل.</li> </ul> <h3 >المساهمة في بيئة العمل</h3> <p >سيلعب شاغل الوظيفة دوراً محورياً في تعزيز ثقافة السلامة والصحة المهنية داخل الشركة، من خلال تطبيق أفضل الممارسات وضمان بيئة عمل آمنة ومطابقة للمعايير. يتطلب الدور التزاماً بالدقة والحرص على التفاصيل في جميع المهام الموكلة.</p> <h3 >معلومات إضافية</h3> <p >الراتب لهذه الوظيفة <strong >غير معلن</strong>. ندعو المهتمين الذين يستوفون المتطلبات المذكورة أعلاه إلى تقديم طلباتهم.</p></div>

. Key Duties and Responsibilities Monitors and follows up on facility activities, including fixed and mobile facilities, in relation to installation, use, and operation. Provides recommendations regarding areas for development and improvement within the section. Supervises the review of the operating plan and maximum capacity of each new or modified production facility. Supervises the review and development of the annual facilities improvement plan. Monitors activities related to reviewing the implementation schedule and implementation plan. Monitors activities related to reviewing the general layout of facility operations. Supervises the review of the facility design and its maximum capacity. Supervises the review of all wells, pipelines, tanks, pumps, and compressors associated with the facility. Monitors tasks related to reviewing control set points and the procedures being implemented. Provides support for reviewing the licensee’s notification upon completion of the commissioning of any new or modified production facility and placing it into service. Provides support for reviewing the licensee’s notification upon commencement of production from each new or modified production facility. Provides support for reviewing the licensee’s notification regarding any proposed significant modifications to any production facility, including a description of the modifications and the reasons for them. Ensures the implementation of a mechanism for technical representation at relevant internal and international conferences, meetings, and forums related to the section’s activities. Adheres to work regulations and behaviors, cybersecurity policies, and procedures of the organizational unit. Performs any other tasks assigned by direct supervisors. Directs direct reports regarding the implementation of their responsibilities and guides them by providing appropriate feedback and advice to contribute to achieving the overall objectives. Develops and manages performance plans for direct reports. Supervises compliance with policies and procedures by all direct reports. Manages the human resources requirements planning process and provides recommendations related to recruitment and promotion. Creates an appropriate work environment by discussing leading practices and lessons learned and encouraging employees to adopt and apply the highest standards of professional and ethical conduct when carrying out their daily responsibilities and tasks. Completes the training needs form and submits it to Human Resources regarding appropriate training programs and courses based on training needs, in addition to evaluating their effectiveness and outcomes for participants in the training programs. Academic Qualification Bachelor’s degree in an Engineering discipline, Administrative Sciences, or any specialization related to the field of work. A Master’s degree in an Engineering discipline, Administrative Sciences, or any specialization related to the field of work is preferred. Required Experience and Number of Years of Experience Minimum of 6 years of experience in the same field of work.

Overview & Responsibilities<br><br>Overview:<br><br>To recommend and implement repairs for all types of industrial and rotating equipment, including but not limited to compressors, turbines, and other equipment.<br><br>Has the ability to document, erect, alter, install, align, repair, replace, disassemble, and reassemble, move and inspect most rotating equipment, using proper tooling and processes to complete work in a safe and timely manner to meet customer needs. Ability to plan and oversee the repairs with limited supervision. Has the ability to help train other employees in the functions and processes in the department.<br><br>The below reflects general details considered necessary to describe the principal functions of the job identified, and shall not be construed as a detailed description of all of the work requirements that may be inherent in the job.<br><br>Responsibilities:<br><br>Promotes safety and quality at all times. Able to work in a team environment. Able to work with little limited supervision. Maintain a clean and organized work area. Conducts themselves in a professional manner at all times when working with internal and external customers. Ability to read and comprehend drawings, sketches, work scopes, and verbal instructions. Uses appropriate equipment, tooling, drawings, work scopes, procedures, specifications and documentation to perform the primary function. Ability to alter and overhaul most rotors, turbines, disc and blade holders, shafts, sleeves, gears, couplings, and all other forms of equipment needed to complete jobs. Ability to set up all equipment needed to complete jobs. Advanced knowledge and accuracy in using various measuring devices: micrometers, indicators, calipers, gauges, and other required tools necessary to perform the job. Able to accurately measure and record all critical clearances and dimensions on turbines, compressors, and any other equipment necessary. Able to pass the annual dimensional inspection test. Able to understand and process documentation associated with turbo machinery such as inspection reports, photo logs, and hold tags. Advance knowledge of lifting, rigging, crane and forklift operations. Able to help train other hourly employees in repair processes and procedures. Maintains continuity among work shifts by documenting and communicating actions, irregularities, and continuing needs. Accepts ownership over work performance and stays abreast of job knowledge and new skill development. <br><br><br>Qualifications:<br><br>High School Diploma or Equivalency5-8 year’s experience with rotating turbo machinery Advanced rigging capabilities Advanced measuring capabilities Experiences with turbines, compressors and other rotating equipment<br><br><br>To learn more about our Job Applicant Privacy Notice, please click here.

<h3 >About the Role</h3> <p >NICE ONE is seeking a customer-focused and results-oriented Salesperson to join our team in Al-Ahsa. This full-time role involves promoting products and services, assisting customers, identifying sales opportunities, and achieving sales targets within a retail or sales environment.</p> <h3 >Key Responsibilities</h3> <ul > <li >Welcome customers, understand their needs, answer questions, and provide professional assistance throughout the sales process.</li> <li >Present product features, benefits, pricing, availability, promotions, and relevant services clearly and accurately.</li> <li >Identify customer needs, recommend suitable products, explain solutions, and convert sales opportunities into completed transactions.</li> <li >Work toward and achieve individual, store, and team sales goals, revenue targets, and key performance indicators.</li> <li >Build positive relationships with customers, encourage repeat business, and provide appropriate follow-up after the sale.</li> <li >Recommend complementary products, upgrades, accessories, warranties, or additional services based on customer requirements.</li> <li >Process purchases, payments, returns, exchanges, and related documentation accurately in accordance with company procedures.</li> <li >Maintain current knowledge of products, services, pricing, promotions, competitors, and market trends.</li> <li >Maintain attractive, organized, and properly labeled product displays, shelves, and promotional areas.</li> <li >Check product availability, support stock counts, report damaged or missing items, and coordinate replenishment.</li> <li >Listen to customer concerns, resolve issues professionally, and escalate complex matters to the appropriate supervisor.</li> <li >Record customer interactions, sales activities, leads, and transactions accurately in approved systems and reports.</li> <li >Support product launches, seasonal campaigns, in-store promotions, and other initiatives designed to increase sales.</li> <li >Assist customers with online orders, digital product information, mobile applications, and other available sales channels.</li> <li >Follow company policies, sales procedures, pricing guidelines, payment controls, and customer privacy requirements.</li> <li >Collaborate with sales colleagues, supervisors, inventory teams, customer service, and marketing to deliver a consistent customer experience.</li> <li >Maintain a clean, safe, organized, and professional sales environment.</li> <li >Use customer feedback, sales results, and supervisor guidance to improve product knowledge, sales techniques, and service quality.</li> </ul> <h3 >Required Skills and Attributes</h3> <ul > <li >Strong communication skills.</li> <li >Demonstrated product knowledge.</li> <li >Proven customer service ability.</li> <li >Attention to detail.</li> <li >Ability to work effectively in a fast-paced retail or sales environment.</li> </ul> <h3 >Work Environment</h3> <p >This role operates within a dynamic retail or sales setting, requiring active engagement with customers and collaboration with team members to maintain high standards of service and sales performance.</p> <h3 >Application Process</h3> <p >Candidates interested in this Salesperson position in Al-Ahsa are encouraged to apply.</p>

<h3 >About Nice One</h3> <p >Nice One is seeking a motivated Salesperson to join its team in Al-Ahsa. This full-time position is central to customer engagement and achieving sales targets within our retail environment. The role requires a customer-focused individual with strong interpersonal skills and a commitment to maintaining high service standards.</p> <h3 >Role Overview</h3> <p >The Salesperson will be responsible for interacting with customers in-store, promoting products, and ensuring a positive shopping experience. This includes driving sales, maintaining merchandising standards, and contributing to the overall achievement of branch targets. The position operates within a fast-paced retail setting, requiring adaptability and product knowledge.</p> <h3 >Key Responsibilities</h3> <ul > <li >Welcome customers, assess their needs, provide accurate product information, and offer personalized recommendations to ensure a positive shopping experience.</li> <li >Proactively promote products and current promotions, meet individual and store sales targets, and close sales using effective questioning and upselling techniques.</li> <li >Maintain attractive product displays, restock shelves, verify pricing and signage accuracy, and keep the sales floor clean and organized.</li> <li >Learn and maintain up-to-date knowledge of product features, benefits, and promotions to confidently advise customers.</li> <li >Operate cash register and payment systems accurately, processing transactions, returns, and exchanges in accordance with company policies.</li> <li >Respond to customer inquiries and complaints professionally, escalating issues when necessary, and following up to ensure satisfaction.</li> <li >Work closely with colleagues and store leadership to meet daily operational goals, participate in team meetings, and support new team members.</li> <li >Adhere to cash-handling procedures, security protocols, and company policies to protect assets and maintain a safe environment.</li> <li >Provide regular feedback to store management on customer trends, inventory needs, and sales performance.</li> </ul> <h3 >Qualifications and Experience</h3> <ul > <li >0-1 years of experience in a sales or customer service role.</li> <li >Demonstrated strong interpersonal and communication skills.</li> <li >Ability to work effectively and efficiently in a fast-paced retail environment.</li> <li >A customer-focused approach with a proactive attitude towards sales.</li> <li >Basic product awareness and a willingness to continuously learn about new offerings.</li> </ul> <h3 >Work Environment and Benefits</h3> <p >The successful candidate will join a collaborative store team focused on customer service and continuous improvement. This role provides access to on-the-job training and opportunities for advancement within the company. Compensation includes a competitive salary with performance-based incentives and employee discounts. Flexible shifts, including weekends and public holidays, are required as dictated by store operations.</p> <h3 >Application Process</h3> <p >We invite interested candidates who meet the qualifications to submit their application.</p>

Join us at Accor, where life pulses with passion!<br><br>As a pioneer in the art of responsible hospitality, the Accor Group gathers more than 45 brands, 5,600 hotels, 10,000 restaurants, and lifestyle destinations in 110 countries. While each brand has its own personality, where you will be able to truly find yourself, they all share a common ambition: to keep innovating and challenging the status-quo.<br><br>By joining us, you will become a Heartist because hospitality is, first and foremost, a work of heart.<br><br>At Sofitel Shahd Al Madinah our Guests experience profound spiritual luxury, a few steps away from Al Masjid Al Nabawi. Our 5-star retreat, near one of Saudi Arabia's most sacred sites, seamlessly connects local traditions with elegant French hospitality.<br><br>You will join a caring environment and a team where you can be all you are. You will be in a supportive place to grow, to fulfil yourself, to discover other professions and to pursue career opportunities, in your hotel or in other hospitality environments, in your country or anywhere in the world!<br><br>You will enjoy exclusive benefits, specific to the sector and beyond, as well as strong recognition for your daily commitment.<br><br>Everything you will do with us, regardless of your profession, will offer a deep sense of meaning, to create lasting, memorable and impactful experiences for your customers, for your colleagues and for the planet.<br><br>Hospitality is a work of heart,<br><br><br><br>Job Description<br><br>Primary Responsibilities <br><br>Training & Development Management<br><br>Assist in the creation, implementation and facilitation of the Hotel Training Plan and budget that is aligned with the hotel’s goals and strategic plan Conduct annual training needs analysis and coordinate with department managers to help identify training opportunities for their team members Initiate, coordinate, deliver and follow-up on all training activities within the hotel Actively initiate relationships and partnerships with industry associations, external training companies and academic counsels related to the hospitality industry Update and maintain accurate records of training activities and participant information Maintain an ongoing Training Calendar to ensure learning resources and opportunities are maximized Develop and manage a central internal resource library of videos/books/magazines that can be utilized by all employees Share responsibilities for the integration and orientation process of new hires Assist with the implementation of new policies, procedures, and standards Prepare and submit training reports Other Responsibilities<br><br>Be fully conversant with hotel fire & life safety/emergency procedures Attend all briefings, meetings and trainings as assigned by management Maintain a high standard of personal appearance and hygiene at all times Be aware of the hotel fire & life safety/emergency procedures Perform other reasonable duties assigned by the assigned by the Management <br><br><br><br>Qualifications<br><br> <br><br>Knowledge and Experience<br><br>Bachelor’s Degree in Human Resources Management / Hotel Management Minimum 3 years of training/facilitation experience Excellent reading, writing and oral proficiency in English & French language Proficient in MS Excel, Word, & Power Point Competencies<br><br>Strong leadership, interpersonal and negotiation skills Excellent communication and customer contact skills Results and service oriented with an eye for details Ability to multi-task, work well in stressful & high-pressure situations A team player & builder A motivator & self-starter Well-presented and professionally groomed at all times

QA/QC MANAGERWesteel Metal Industries I. L. L. C. Location: Dammam, Saudi Arabia Industry: Structural Steel Fabrication / PEB / Industrial Projects Position: QA/QC Manager Reporting To: General Manager / Operations Management Position Objective Westeel Metal Industries is seeking an experienced QA/QC Manager to lead the company's quality function across structural steel fabrication, welding, painting/coating, inspection, documentation, and project delivery. The successful candidate must have strong experience working on Saudi Aramco projects and a thorough understanding of Aramco quality requirements, inspection procedures, documentation standards, material traceability, welding controls, and vendor/manufacturer quality systems. The QA/QC Manager will be responsible for establishing, implementing, maintaining, and continuously improving Westeel's Quality Management System while ensuring that all fabricated products and project deliverables comply with client specifications, approved drawings, applicable codes, and contractual requirements. Key Responsibilities Quality Management System Develop, implement, maintain, and continuously improve Westeel's Quality Management System. Ensure compliance with ISO 9001 requirements and applicable client-specific quality requirements. Establish and maintain project-specific Quality Plans, Inspection and Test Plans (ITPs), procedures, checklists, and inspection formats. Ensure quality requirements are integrated into engineering, procurement, fabrication, painting, delivery, and site activities. Conduct internal quality audits and ensure timely closure of findings. Monitor quality performance and report key trends to management. Saudi Aramco Compliance Ensure Westeel's activities comply with applicable Saudi Aramco engineering standards, material specifications, inspection requirements, and project procedures. Review project requirements and identify all applicable Aramco quality obligations before commencement of work. Coordinate with Aramco inspectors, client representatives, third-party inspection agencies, and project quality teams. Prepare and manage inspection notifications and requests in accordance with project requirements. Ensure all required documentation is available and approved before inspections. Manage and close quality observations, NCRs, punch items, and corrective actions. Support vendor qualification, approval, audits, and client surveillance activities. Ensure readiness for Aramco audits and inspections at all times. Structural Steel Fabrication Quality Oversee QA/QC activities related to structural steel and PEB fabrication. Ensure fabrication complies with approved shop drawings, project specifications, applicable codes, and client requirements. Control inspection activities for:Material receiving Cutting Drilling Fit-up Welding Dimensional inspection Surface preparation Blasting Painting and coating Galvanizing where applicable Final inspection Packing and dispatch Verify dimensional tolerances and fabrication quality before release. Ensure non-conforming materials or fabricated items are properly identified, segregated, and controlled. Welding Quality Ensure welding activities are carried out in accordance with approved WPS and PQR requirements. Verify welder qualifications and continuity records. Maintain proper control of welding consumables, storage, baking, issuance, and traceability. Monitor fit-up, preheat, interpass temperature, welding parameters, and visual inspection. Coordinate required NDT activities including:VTMTPTUTRT where applicable Ensure NDT personnel and subcontractors hold appropriate qualifications and certifications. Investigate welding defects and ensure proper repair procedures are followed. Monitor repair rates and implement measures to reduce recurring defects. Material Control & Traceability Ensure full material traceability from receiving through fabrication and final delivery. Review Material Test Certificates and verify compliance with purchase orders, specifications, and project requirements. Ensure proper heat-number transfer and identification throughout fabrication. Verify materials before release to production. Coordinate PMI or additional material verification where required. Prevent use of unapproved or unidentified materials. Painting & Coating Quality Ensure surface preparation and coating activities comply with approved coating systems and specifications. Monitor:Surface cleanliness Surface profile Ambient conditions Paint mixing Pot life Wet film thickness Dry film thickness Recoating intervals Final coating inspection Ensure paint materials are approved, properly stored, and within shelf life. Maintain coating inspection and environmental records. Coordinate third-party coating inspection where required. Inspection & Testing Develop and maintain Inspection and Test Plans for fabrication and project activities. Identify hold points, witness points, review points, and surveillance requirements. Coordinate inspection schedules with production and project teams. Ensure inspections are completed without unnecessarily delaying production. Maintain proper inspection records and release documentation. Ensure no fabricated item is dispatched without required quality clearance. NCR & Corrective Action Management Raise and manage Non-Conformance Reports where quality requirements are not achieved. Conduct root-cause analysis for recurring quality issues. Develop corrective and preventive actions with relevant departments. Track NCRs through final closure. Analyze NCR trends and identify systemic problems. Reduce rework, rejection, repair, and customer complaints. Quality Documentation Ensure complete and accurate preparation of project quality dossiers and Manufacturing Record Books. Maintain proper control of:Material certificates WPS/PQR records Welder qualifications NDT reports Dimensional inspection reports Painting reports Calibration certificates Inspection requests NCRsRelease notes Final inspection records Ensure documentation is compiled progressively throughout the project rather than at project completion. Coordinate final dossier submission and client approval. Calibration & Equipment Control Ensure all measuring and inspection equipment is properly identified and calibrated. Maintain a calibration register and prevent use of expired equipment. Coordinate third-party calibration where necessary. Ensure inspection tools are suitable for their intended application. Supplier & Subcontractor Quality Evaluate suppliers and subcontractors from a quality perspective. Review supplier quality documentation before material approval. Conduct supplier audits and inspections where necessary. Ensure subcontracted fabrication, galvanizing, painting, machining, and NDT activities comply with project requirements. Monitor supplier NCRs and quality performance. Team Management Manage QA/QC Engineers, Inspectors, Welding Inspectors, Coating Inspectors, document controllers, and other quality personnel as applicable. Assign clear responsibilities and inspection coverage. Train production personnel on quality requirements and recurring issues. Develop competency within the quality department. Ensure QA/QC personnel maintain independence and professional authority over quality acceptance decisions. Key Performance Indicators The QA/QC Manager's performance will be measured against areas including:NCR frequency and closure time Welding repair rate Rework and rejection percentage Customer complaints Inspection acceptance rate Aramco/client inspection performance Audit findings and closure Material traceability compliance Quality dossier submission performance Calibration compliance On-time inspection completion Cost of poor quality Supplier quality performance Mandatory Qualifications & Experience Bachelor's degree in Mechanical Engineering, Welding Engineering, Metallurgical Engineering, Civil/Structural Engineering, or a related discipline. Minimum 9 years of QA/QC experience in structural steel fabrication, industrial fabrication, oil & gas, EPC, or related industries. Demonstrable experience working on Saudi Aramco projects is mandatory. Strong knowledge of Saudi Aramco quality requirements and inspection processes. Strong experience in structural steel fabrication and welding inspection. Experience managing factory-based QA/QC operations. Strong understanding of material traceability and manufacturing documentation. Experience dealing directly with client inspectors and third-party inspection agencies. Strong knowledge of NCR management, root-cause analysis, corrective actions, and quality audits. Excellent English communication and reporting skills. Technical Knowledge Strong working knowledge of applicable standards and codes is required, including as relevant:Saudi Aramco Engineering Standards and Specifications ASMEAWS D1.1ASTMAISCSSPC / AMPP coating requirements ISO 9001ISO 3834 principles Applicable NDT standards Project-specific client specifications Preferred Certifications Candidates holding one or more of the following will be strongly preferred:AWS Certified Welding Inspector (CWI) CSWIP 3.1 or 3.2ASNT Level II / Level IIINACE / AMPP Coating Inspector ISO 9001 Lead Auditor Saudi Aramco-approved inspector experience Aramco vendor/manufacturer quality experience Candidate Profile Westeel requires a strong factory-based QA/QC leader who understands fabrication in practice, not only quality documentation. The successful candidate must be capable of identifying issues directly on the shop floor, challenging unacceptable workmanship, coordinating effectively with production, and ensuring that commercial or production pressure never results in non-compliant products being released. The role requires someone who can build a quality culture across the organization while maintaining a practical balance between strict compliance, production efficiency, and project delivery.

Job Title: Project Management Specialist<br>Support the planning, coordination, execution, monitoring, and reporting of projects to ensure activities are delivered on time, within budget, and in accordance with approved scope, quality standards, and company requirements. Key Responsibilities Support Project Managers in planning and executing projects from initiation through completion. Develop and maintain project schedules, action plans, milestones, and deliverables. Coordinate with internal departments, clients, contractors, consultants, and other stakeholders. Monitor project progress against approved schedules, budgets, scope, and objectives. Prepare and maintain project reports, dashboards, status updates, and presentations for management. Track project risks, issues, dependencies, and corrective actions, and ensure timely follow-up. Coordinate project meetings, prepare agendas and minutes, and follow up on assigned actions. Maintain accurate project documentation, records, approvals, and correspondence. Assist in monitoring project costs, resources, manpower, procurement, and contractual requirements. Support change management by tracking variations, scope changes, and their potential impact on cost and schedule. Ensure project activities comply with company policies, client requirements, applicable standards, and contractual obligations. Identify potential delays or challenges and coordinate with relevant teams to implement appropriate solutions. Support project close-out activities, including documentation, lessons learned, handover, and final reporting. Perform any other project-related duties assigned by management. Qualifications Bachelor’s degree in project management, Business Administration, Engineering, or a related field.1–3 years of relevant experience in project management, project coordination, or project controls. Experience in managing or supporting projects from planning through completion. Strong knowledge of project planning, scheduling, reporting, and documentation. Experience with MS Project, Primavera P6, or other project management tools is preferred. Proficiency in Microsoft Office, particularly Excel and Power Point. Good understanding of project management methodologies and principles. PMP or other relevant project management certification is an advantage. Core Competencies Project planning and coordination Schedule and progress monitoring Risk and issue management Stakeholder coordination

About the Company:National Care Company (NCC) is a premier manufacturing firm in Saudi Arabia, dedicated to delivering high-quality cleaning solutions across various sectors. With a workforce of over 5,000, NCC is committed to excellence, innovation, and sustainability, making it a trusted partner in households, industries, and veterinary practices nationwide.<br>About the Role:The main role is to execute predictive, preventive, and reactive electrical maintenance activities to ensure reliable equipment performance and support safe and continuous production operations. In addition, the position will troubleshoot electrical faults, maintain electrical panels and wiring, support equipment reliability and performance improvement, and assist operators with basic electrical troubleshooting and repair.<br>Responsibilities:Execute predictive, preventive, and reactive electrical maintenance activities according to the maintenance schedule. Review job orders, determine work priorities, and perform repair, maintenance, and installation activities. Read electrical diagrams, troubleshoot electrical faults, and repair electrical panels, wiring, and connections. Support equipment reliability and performance improvement by identifying operational losses and implementing defined countermeasures. Perform safety risk analysis and pre-work safety checks before starting maintenance activities. Follow QHSE procedures and ensure the proper use of required Personal Protective Equipment (PPE). Support continuous improvement activities and collaborate with production teams to improve maintenance practices and standards. Coach and support operators in basic electrical troubleshooting, repair, and standard maintenance routines. Use digital maintenance tools and predictive maintenance analytics to support effective electrical maintenance.<br>Qualifications:Diploma in Electrical Engineering, Automation, or a related technical field. Minimum 7 years of relevant electrical maintenance experience. Experience in predictive, preventive, and reactive maintenance. English language proficiency. Basic level IT skills.<br>Job Specific Skills:Full capability to read electrical diagrams and troubleshoot electrical panels. Ability to execute electrical wiring and connections. Basic knowledge of automation systems. Strong knowledge of electrical maintenance equipment, tools, materials, and procedures. Ability to use digital maintenance tools such as AMM Mobile and predictive maintenance analytics.

Jobe Scope<br>Provide engineering governance, troubleshooting, and technical support for Maintenance Engineering Support Section to improve equipment reliability, integrity, and maintenance effectiveness.<br>Key Duties, Responsibility & Accountabilities <br>Ensure compliance with SATORP HSSE, regulatory, and technical requirements across all Maintenance Engineering activities. Provide strategic leadership and oversight of Maintenance Engineering programs, including maintenance cost optimization, risk-based maintenance, failure analysis, and asset performance improvement initiatives. Provide Engineering leadership and coordination for Routine maintenance, Critical Equipment maintenance, Turnarounds, shutdowns and asset integrity initiatives. Govern Engineering standards, Maintenance strategies, and Maintenance procedures to ensure safe, compliant, and optimized asset performance. Direct and approve troubleshooting activities and Maintenance Engineering recommendations to mitigate operational risks and enhance equipment reliability. Ensure the effective development, implementation, and continuous improvement of preventive, predictive, corrective and condition-based Maintenance programs for Mechanical and Instrumentation assets. Oversee the monitoring of equipment reliability, Maintenance effectiveness, recurring failures, and technical risks, ensuring timely corrective actions and sustainable performance improvements. Foster a culture of technical excellence, continuous improvement, and operational discipline through effective leadership, coaching, and development of Maintenance Engineering personnel. Define departmental priorities, allocate resources, and ensure the successful delivery of Maintenance Engineering objectives in alignment with business and operational goals. Govern spare parts optimization strategies to ensure the availability of critical materials while balancing reliability, operational risk, and cost effectiveness. Ensure effective utilization of CMMS to control maintenance activities, minimize reliability risks, and sustain asset integrity.<br><br>Requirements Bachelor’s Degree in Mechanical/Instrumentation Engineering or a related discipline.10-15 years of experience in relevant refinery, petrochemical experience<br>Job Specific Skills <br>Proven team leadership experience. Proficiency in SAP/CMMS and applicable reporting tools Risk-based maintenance and spare parts optimization Knowledge of HSSE, PTW/LOTO, quality, and documentation requirements<br>Preferred Certificates CMRP

Head of Goalkeeping Development<br>We are seeking an experienced and forward-thinking Head of Goalkeeping Development to lead goalkeeper development across our pathway, from Academy through to First Team. The successful candidate will be responsible for establishing and implementing a club-wide goalkeeping philosophy and development framework, creating a clear pathway for talented young goalkeepers to progress towards senior and international football.<br>Key Responsibilities Lead the Club's goalkeeper development strategy across Academy and First Team. Develop a consistent goalkeeping philosophy, curriculum and coaching methodology aligned with the Club's playing model. Establish clear development benchmarks and Individual Development Plans (IDPs). Lead, mentor and develop goalkeeper coaches across the pathway. Identify and accelerate the development of high-potential goalkeepers. Work closely with First Team staff to create effective transition opportunities for Academy goalkeepers. Integrate goalkeeper development with Technical, Performance, Medical and Analysis departments. Establish goalkeeper-specific performance profiles, KPIs and monitoring processes. Support goalkeeper recruitment, talent identification and succession planning. Ensure goalkeeper training effectively combines position-specific development with integration into team training and the Club's game model.<br>Essential Requirements UEFA Goalkeeping A Licence or equivalent recognised qualification. Significant goalkeeper coaching experience within elite professional football. Strong understanding of modern technical, tactical and physical goalkeeper development. Experience developing players across different stages of the performance pathway. Excellent leadership, communication and organisational skills. Proven ability to work effectively within a multidisciplinary environment.<br>Desirable UEFA A Licence or equivalent. Previous Head of Goalkeeping or Academy Goalkeeping leadership experience. Experience working across both Academy and First Team environments. Track record of developing young goalkeepers into senior professional football. Experience managing and developing goalkeeper coaches. Strong understanding of performance analysis, data and goalkeeper talent identification.<br>This is an exciting opportunity to shape a club-wide goalkeeper development programme, build an aligned pathway from Academy to First Team and contribute to the long-term development of elite goalkeepers.

Company Description Pay Link is a Saudi electronic payment gateway, designed and developed entirely by innovative Saudi talent to simplify digital payments for merchants, government entities, and companies. The company supports the rapid transition from traditional commerce to e-commerce in alignment with Saudi Arabia’s Vision 2030. Pay Link focuses on secure, user-friendly payment solutions that help organizations modernize their financial operations. The company operates under the supervision and regulation of the Saudi Central Bank, ensuring high standards of trust, compliance, and reliability.<br>Role Description This is a full-time, on-site Data Protection Officer role based in Al Khobar. The Data Protection Officer will oversee data privacy practices, ensure compliance with applicable data protection laws and regulations, and act as the primary point of contact for regulatory authorities. Daily responsibilities include drafting and maintaining privacy policies and procedures, monitoring adherence to data protection requirements, conducting risk assessments, and advising internal teams on privacy implications of new products and processes. The role involves handling data subject requests, leading privacy impact assessments, organizing staff training on data protection, and collaborating with legal, IT, security, and business stakeholders to embed privacy by design across the organization.<br>Qualifications<br> Strong expertise in Data Privacy and Privacy Compliance, with a track record of implementing and managing privacy programs. Solid understanding of Regulatory Compliance and Law, particularly in financial services, payments, and data protection frameworks. Ability to develop, review, and maintain clear and robust Privacy Policies and related internal guidelines. Experience with risk assessment, incident response, and data breach management in a regulated environment. Excellent analytical, communication, and stakeholder management skills, with the ability to advise senior leadership and operational teams. Relevant academic background in Law, Information Security, Compliance, or a related field; professional certifications in privacy or compliance (e.g., CIPP, CIPM) are an advantage. Fluency in English; proficiency in Arabic is highly beneficial for working with local regulations and stakeholders. Demonstrated ability to work on-site in a collaborative environment and maintain high ethical standards and confidentiality.

Responsibilities:<br>1. Prepare and process delivery notes, sales invoices, credit notes, and debit notes in the ERP system in accordance with confirmed dispatches.2. Verify delivery details, pricing, and order accuracy before generating commercial documentation.3. Coordinate with dispatch, sales, and logistics teams to ensure timely documentation of shipments and deliveries.4. Maintain proper records of all commercial transactions in both digital and physical formats for internal audit readiness.5. Ensure all commercial documents comply with VAT regulations, SOCPA standards, and WARAQ’s internal policies.6. Follow up on Proof of Delivery (POD) collection and confirm receipt with customers for invoicing and payment processing.7. Coordinate with Finance to ensure alignment between invoicing and payment terms, including the release of credit notes.8. Support export documentation including commercial invoices, packing lists, COO, SASO, and other shipping formalities.9. Assist in resolving discrepancies in invoices, product quantities, transport charges, or delivery notes by coordinating with relevant departments.10. Monitor and report on open delivery notes, pending invoices, and aged documentation requiring closure.11. Track and update customer master data, payment terms, and documentation preferences in the ERP system.12. Prepare periodic documentation performance reports, including billing KPIs, delivery vs invoice timelines, and documentation cycle time.13. Liaise with external agents, transport companies, and customers to finalize shipment and billing requirements.14. Assist in year-end closing by ensuring documentation completeness, proper filing, and reconciliation support to Finance.15. Support process improvement initiatives by recommending enhancements to the documentation workflow and ERP usage.<br>Minimum Qualification:Diploma in Business Administration, Supply Chain, or related field Training<br>Skills:ERP knowledge (SAP preferred), document control practices, and commercial process understanding Proficiency in Microsoft Office, especially Excel and Outlook Strong attention to detail, coordination, and organizational skills English required Minimum<br>Experience:03-05 Years.

Who we are:Albawani is one of the leading construction and contracting companies in Saudi Arabia. Established in 1991, the company has grown from a small civil works contractor into a major diversified group with operations across construction, infrastructure, engineering, water and power, and industrial services. Headquartered in Riyadh, Albawani is recognized for delivering large-scale commercial, healthcare, educational, and government projects throughout the Kingdom. Albawani is known for its strong commitment to quality, safety, and innovation, holding several international ISO certifications and a Class-1 contractor ranking in Saudi Arabia.<br>Job Title: Stakeholder Manager Department: Stakeholder Management Role Purpose: Manage project-level stakeholder coordination with clients, consultants, authorities, and relevant third parties to support project delivery, facilitate approvals, resolve stakeholder-related issues, and ensure effective communication throughout the project lifecycle.<br>Key Duties & Responsibilities:Coordinate stakeholder communications, meetings, and follow-up actions. Maintain effective relationships with clients, consultants, government authorities, and third parties. Ensure timely communication of stakeholder requirements and project updates. Facilitate stakeholder meetings and document outcomes and action items. Follow up on permits, NOCs, approvals, and access requirements. Coordinate with relevant authorities to secure project-related approvals. Track approval statuses and ensure timely resolution of pending requirements. Maintain records of approvals and regulatory correspondence. Maintain stakeholder registers and engagement trackers. Coordinate stakeholder requirements with project teams and departments. Support resolution of stakeholder concerns and operational issues. Escalate critical stakeholder matters to management when necessary. Identify stakeholder-related risks and potential project impacts. Support implementation of mitigation actions and follow-up plans. Prepare periodic stakeholder reports and status updates. Monitor stakeholder commitments and follow-up actions. Maintain stakeholder records, correspondence, and documentation. Ensure accurate filing and retrieval of stakeholder-related information. Support project audits and reporting requirements. Maintain stakeholder databases and tracking systems.<br>Job Requirements:Bachelor’s degree in Engineering, Business Administration or a related field. 8–10 years’ relevant experience, preferably in construction projects. Good communication, coordination, negotiation and reporting skills. Fluency in English; Arabic is preferred.

EPC Projects – Oil & Gas | Saudi Aramco<br>JOB PURPOSEThe Contract Manager is responsible for the end-to-end contractual and commercial management of the Company's EPC contract(s) with Saudi Aramco, and for the development, tendering, award, and administration of all project subcontracts. The role safeguards the Company's contractual position and entitlements under the prime contract, while leading procurement of construction, engineering, and specialized-service subcontractors from tender through subcontract issuance, execution, and close-out — ensuring subcontract terms are back-to-back with the prime contract and aligned with project schedule, cost, and risk objectives.<br>KEY RESPONSIBILITIES<br>A. Prime Contract Management (Saudi Aramco)<br>Act as the primary contractual focal point for administration of the EPC contract with Saudi Aramco, ensuring full compliance with the contract terms, General Terms & Conditions, SAEPs/SAESs, and Aramco contracting procedures. Monitor contractual obligations, milestones, notice periods, and entitlements; prepare and issue contractual correspondence and notices to protect the Company's rights (variations, extensions of time, force majeure, and similar matters). Manage the change management process: identify, evaluate, prepare, and negotiate Variation Orders/Change Orders with Saudi Aramco. Lead or support preparation and negotiation of claims and extension-of-time requests, and support dispute avoidance and resolution with the Client. Manage compliance of invoicing, payment milestones, and guarantees/bonds (performance bond, advance payment bond, retention) with contract requirements. Maintain contract registers covering obligations, correspondence, milestones, insurance, bonds/guarantees, and key contractual dates. Coordinate with Legal, Project Controls, Engineering, Construction, HSE, and QA/QC to ensure contractual compliance is embedded across all project disciplines.<br>B. Subcontract Development, Procurement & Tendering<br>Develop the project procurement and subcontracting strategy and plan, aligned with the project execution plan, schedule, and budget. Lead the full tendering cycle for all subcontract packages, including: -Scope definition and bid package preparation (ITB, scope of work, technical and commercial terms, draft subcontract) -Subcontractor prequalification -Tender issue, clarifications, and bid receipt -Technical and commercial bid evaluation -Commercial negotiation and award recommendation Prepare and issue subcontract documents (manpower supply, construction, engineering, and specialized services, among others), ensuring terms are back-to-back with the prime EPC contract obligations on HSE, QA/QC, schedule, liquidated damages, insurance, and warranty. Conduct commercial and risk evaluation of bids and negotiate pricing and terms, securing internal approvals in line with the Company's delegation of authority prior to award. Ensure every subcontract includes appropriate protections: performance security, liquidated damages, retention, indemnities, insurance, warranty, termination, and dispute resolution provisions consistent with Company policy and the prime contract.<br>C. Subcontract Administration & Management<br>Administer awarded subcontracts through the full project life cycle: mobilization, variation orders, claims, back-charges, extensions of time, invoicing/payment certification, and close-out. Monitor subcontractor performance against contractual obligations (schedule, quality, HSE, manpower) and coordinate corrective actions and formal notices as required. Manage subcontract variations and change orders, ensuring proper valuation, approval, and documentation. Review and certify subcontractor invoices and payment applications against approved timesheets, progress, and contract terms. Manage subcontract close-out, final accounts, retention release, and final documentation for each subcontract. Maintain a live subcontract register/tracker covering status, value, variations, key dates, and performance for all subcontracts.<br>D. Commercial & Risk Management<br>Identify, assess, and mitigate contractual and commercial risks across the prime contract and all subcontracts. Provide contractual input to cost forecasts, cash flow, and risk registers in coordination with Project Controls. Ensure compliance with Company governance, delegation of authority, and approval matrices for all procurement and contract decisions. Maintain current knowledge of Saudi Aramco requirements, Saudi labor law, and other local regulatory requirements affecting contracts and subcontracts.<br>E. Team & Stakeholder Management<br>Lead and mentor contracts and procurement staff assigned to the project. Liaise directly with Saudi Aramco contracts/proponent representatives, subcontractors, and internal stakeholders (Project Manager, Project Controls, Construction, Engineering, Finance, Legal, HSE). Represent the Company in contractual meetings and negotiations with the Client and with subcontractors.<br>3. QUALIFICATIONS & EXPERIENCE<br>Bachelor's degree in Engineering, Quantity Surveying, Law, Business Administration, or a related field; a postgraduate qualification (MBA, Contracts/Commercial Law, or equivalent) is an advantage. Minimum 10 years of experience in contracts/commercial management within EPC or construction, with experience in the oil & gas sector. Direct experience managing contracts on Saudi Aramco projects is required, with strong working knowledge of Aramco General Terms & Conditions, SAEPs, and Aramco contracting/procurement procedures. Proven experience leading full subcontract tendering cycles, from procurement strategy through bid evaluation to award and subcontract issuance. Demonstrated experience managing subcontracts through execution, including variations, claims, invoicing, and close-out. Strong background in construction contracting and procurement, with working knowledge of FIDIC and/or Saudi Aramco contract forms. Professional certification (e.g., RICS, CIPS, PMP, or equivalent) is preferred.<br>4. SKILLS & COMPETENCIES<br>Strong contractual and commercial acumen, with close attention to risk and detail. Excellent negotiation skills with Clients, subcontractors, and vendors. Strong drafting skills for contracts, correspondence, and claims. Solid understanding of Saudi labor law and local contracting practices. Effective leadership and cross-functional coordination skills. Proficient in MS Office (Word, Excel); familiarity with contract/document management systems. Fluent in English, written and spoken; Arabic is an advantage. High level of integrity and professionalism, particularly regarding anti-bribery and anti-corruption compliance.<br>5. WORKING CONDITIONSBased at the project site office or Al-Khobar office, Kingdom of Saudi Arabia, site mobilization upon engineering stage completion Reports functionally and administratively to the Project Manager.

Company Description We are a logistics provider specializing in warehousing, contract logistics, and transportation solutions for diverse industries. The company focuses on delivering reliable, cost-effective services that support customers’ supply chain efficiency and long-term growth. Operations are centered in Saudi Arabia, with a particular emphasis on serving regional and local market needs. We values integrity, operational excellence, and customer-centric service. Team members are encouraged to contribute ideas, take ownership, and support continuous improvement across the organization.<br><br>Role Description The Head of Warehousing & Contract Logistics is a full-time, on-site leadership role based in KSA, responsible for overseeing all warehousing and contract logistics operations. This role includes planning and managing warehouse capacity, inventory accuracy, and service levels, while ensuring compliance with safety, quality, and regulatory standards. The person in this position will lead and develop operational teams, define performance KPIs, and implement process improvements to enhance efficiency and customer satisfaction. They will manage contract logistics solutions, collaborate with sales and commercial teams on service design, and oversee procurement and vendor relationships related to warehousing and logistics services. The role also involves budget ownership, forecasting, and data-driven decision-making, requiring regular reporting to senior management and close coordination with internal and external stakeholders.<br><br>Qualifications Saudi Nationals preferred Bachelor’s degree in Supply Chain Management, Logistics, Business Administration, or a related field.8+ years of progressive experience in Contract Logistics / Warehouse Management, with at least 3 years in a senior leadership role. Strong expertise in Warehouse Management Systems (WMS), ERP tools, and supply chain analytics. Proven track record in managing large-scale warehousing operations and multi-client facilities. Excellent negotiation, communication, and client-facing skills.<br>Candidates should possess strong Analytical Skills, including data interpretation, KPI tracking, and performance reporting to support operational and strategic decisions. Candidates should possess Contract Negotiation and Contract Management skills to structure, negotiate, and oversee warehousing and logistics agreements with customers and service providers. Candidates should possess Procurement skills to manage sourcing, vendor selection, and cost optimization for warehousing and logistics-related services and materials. Candidates should possess Team Management skills, including the ability to lead diverse teams, drive engagement, manage performance, and foster a culture of safety and continuous improvement. Extensive experience in warehousing, contract logistics, or supply chain operations, preferably in the freight and logistics sector. Proficiency in Arabic and English, with strong communication and stakeholder management capabilities. Demonstrated experience in process optimization, warehouse management systems (WMS), and standard operating procedures (SOPs).