وظائف الخليج

<p>Facilities &amp; Building Maintenance Management Hotel Experience Mandatory HVAC, MEP systems Electrical, Plumbing Fire safety systems BMS Preventive maintenance Salary: KWD 350 to 450 Free Accom Work VISA Online Interview WhatsApp: +9PHONE_NUMBER</p><p><strong>Desired Candidate Profile</strong></p><p>Facilities &amp; Property Maintenance Manager experience in Hotel Industry</p>

<p>The job requires both Male and Female applicants. Minimum of 2 years working experience is required for this position</p><p><strong>Desired Candidate Profile</strong></p><p>Candidates must have at least Bachelor's / College Degree</p> <ul> <li>PRC-licensed Nurse with experience in a dental clinic</li> </ul>

<p>Primary Responsibilities: To work cooperatively within the well testing team to deliver high-quality job with full adherence to HSE requirements.</p><p>Responsibilities: Promote safety culture and to carry out his duties in a safe manner. Maintain well testing unit, auxiliary equipment s and tools in proper condition. Ensure necessary set of equipment s assigned to his/her cell are in proper place and in perfect operational condition for a job. Understand well site operational safety hazards and familiar with emergency response plan. Report HSE and operational observations, hazard &amp; risk assessment, near miss incidents and accident etc. in proper way. Ensure compliance on substance abuse requirements, duty of care, transportation safety requirements, working at height, and other applicable HSE procedures. Assist chief operator and supervisor in all phases of job preparation, well testing and preventive maintenance. Assist crew chief with restocking of well site supplies. Keep the area of work neat and tidy. Must comply with all OIMS procedures that are applicable to the job being carried out, and meet the annual HSE objective being assigned. Other activities as delegated.</p><p><strong>Desired Candidate Profile</strong></p><p>Should have good knowledge in well testing operations or any relevant experienced in same domain and firm awareness about HSE requirements in oil and gas industry</p>

<p>We're looking for a Category Manager to spearhead and grow talabat's new standalone Beauty vertical. This is a high-impact, entrepreneurial role where you will define the category strategy from the ground up owning assortment, supplier relationships, pricing, promotions, and commercial performance for beauty across the region.The right candidate brings deep knowledge of the beauty industry (skincare, haircare, cosmetics, fragrance, personal care), a strong commercial mindset, and the drive to build something new in one of the fastest-growing e-commerce markets in the world. What's On Your Plate? Category Ownership Lead end-to-end category management for the Beauty vertical, including skincare, cosmetics, haircare, fragrance, and personal care. Define and execute the beauty category strategy aligned with talabat's commercial goals and regional consumer trends. Monitor and drive category KPIs: sales, gross margin, P&amp;L, conversion, and basket size. Assortment &amp; Supplier Management Curate a compelling and competitive beauty assortment balancing mass-market, premium, and emerging brands relevant to MENA consumers. Identify and onboard local and regional beauty suppliers and brand partners; negotiate commercial terms including pricing, rebates, payment terms, and exclusivities. Work closely with regional teams to align on international brand contracts and ensure a consistent portfolio across markets. Stay ahead of beauty trends (clean beauty, K-beauty, halal-certified, etc.) and translate them into actionable assortment decisions. Pricing &amp; Promotions Define pricing strategy for the beauty category in line with market benchmarks and competitor positioning. Conduct regular market price audits across key beauty players in the region. Build and manage the beauty promotions calendar including seasonal campaigns (Ramadan, gifting seasons, beauty events) and brand-specific activations. Analyze promotional effectiveness and continuously optimize based on consumer data and sell-through performance. Cross-functional Collaboration Provide input to the Operations team on store flow, product adjacencies, fixtures, and merchandising standards suited to beauty. Partner with Marketing to develop compelling beauty campaigns and content that drive awareness and conversion. Work with Replenishment on forecasting and inventory management to minimize out-of-stocks and overstock for high-SKU beauty ranges.</p><p><strong>Desired Candidate Profile</strong></p><p>3+ years of experience in category management, buying, or commercial roles within the beauty industry ideally covering skincare, cosmetics, haircare, or fragrance. Experience working with or for beauty retailers, beauty e-commerce platforms, FMCG companies, or beauty brand distributors in an international or regional setting. Strong knowledge of the MENA beauty market: consumer preferences, key brands, distribution dynamics, and emerging trends. Solid commercial acumen: proficiency in margin calculations, P&amp;L management, promotional ROI analysis, and supplier negotiations. Entrepreneurial mindset comfortable with ambiguity and excited to build a new vertical from scratch. Highly detail-oriented and structured; able to manage multiple brands and SKUs while keeping the big picture in focus. Excellent communication and stakeholder management skills across both internal teams and external partners.</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> To provide the best shopping experience to each and every customer through Outstanding Customer Service.<br> <br> To be the brand advocate and the face of the store and contribute to the efficiency of operational processes and standards including stock management.<br> <br> To ensure that customers get a positive first impression of the stores for them to be willing to come back later.<br> <br> Stock<br> <br> Ensure products are stocked and displayed to the right levels as per guidelines and management direction.<br> <br> Support in receiving and displaying new arrivals.<br> <br> Participate in stock count / inventory taking.<br> <br> Participate in products replenishment.<br> <br> Handle products with utmost care in store and at POS area to avoid damages.<br> <br> Job context:<br> <br> Accountable for ensuring the proper implementation and efficiency of sales, operational standards, customer service, visual merchandise, and promotional plans.<br> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills">Strong verbal and written communication skills.<br> <br> Excellent Customer Service Skills.<br> <br> Pleasant personality.<br> <br> Passion for the Retail/Fashion Industry.<br> <br> Ability to make relationship with customer, convince and upsell skills.<br> <br> Proven ability to drive positive customer experiences that build loyalty and deliver measurable results.<br> <br> arab &amp; unab team<br> <br> only ready to join<br> <br> Job Type: Full-time<br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>About the Role</p><p>We are seeking an experienced, highly organized, and detail-oriented <b>Senior HR &amp; Admin Officer</b> to join our growing team. The ideal candidate will manage end-to-end HR operations and administrative functions, ensuring smooth workplace operations across our restaurant branches. A mandatory <b>Bachelor's degree</b>, hands-on experience with <b>Odoo ERP</b>, full proficiency in <b>Microsoft Office</b>, fluency in <b>English</b>, and a strong background in the F&amp;B/hospitality sector are required.</p><p>Key Responsibilities</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;<b>HR Operations:</b> Oversee employee lifecycle processes, including recruitment, onboarding, attendance tracking, leave management, and offboarding for both head office and restaurant branch staff.</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;<b>System &amp; Office Management:</b> Maintain employee records, attendance, payroll inputs, and administrative documentation using <b>Odoo ERP</b> and <b>MS Office Suite</b>.</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;<b>Government &amp; Compliance:</b> Handle government portal transactions (visas, work permits, civil IDs, health certificates for food handlers) and ensure strict adherence to local labor laws.</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;<b>Payroll &amp; Benefits:</b> Collaborate with finance to process monthly payroll, overtime calculations, and end-of-service benefits accurately.</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;<b>Admin &amp; Facilities:</b> Manage office supplies, vendor contracts, filing systems, branch administrative requests, and staff accommodation/transportation logistics.</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;<b>Employee Relations:</b> Serve as a point of contact for staff inquiries, resolve workplace issues, and foster a positive organizational culture.</p><p>Requirements &amp; Qualifications</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;<b>Education:</b> <b>Bachelor’s Degree is mandatory</b> (preferably in Human Resources, Business Administration, or a related field).</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;<b>Experience:</b> 4–6 years of progressive HR &amp; Admin experience, preferably within the <b>F&amp;B, Restaurant, or Hospitality</b> industry.</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;<b>Language Proficiency:</b> <b>Fluency in English</b> (spoken and written) is mandatory; Arabic is a plus.</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;<b>Software Proficiency:</b></p><p>o&nbsp;&nbsp;&nbsp;Hands-on experience using <b>Odoo ERP</b> (HR, Payroll, and Attendance modules).</p><p>o&nbsp;&nbsp;&nbsp;<b>Full mastery of Microsoft Office Suite</b> (Excel, Word, PowerPoint, Outlook).</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;<b>Government Portals:</b> Familiarity with local government online platforms and visa/residency procedures.</p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p>Key Skills &amp; Competencies</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;<b>Superior Organization &amp; Structuring:</b> Exceptional organizational skills, systematic filing, methodical record-keeping, and high attention to detail.</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;<b>Multitasking &amp; Time Management:</b> Ability to prioritize tasks, meet tight deadlines, and efficiently manage administrative workflows in a fast-paced environment.</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;<b>Problem Solving &amp; Decision Making:</b> Strong analytical skills to handle operational challenges and resolve branch requests smoothly.</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;<b>Interpersonal &amp; Communication Skills:</b> Clear communication style with the ability to maintain confidentiality and handle employee relations professionally.</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;<b>Certifications (Preferred):</b> SHRM-CP, PHRi, or CIPD.</p></div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>The Junior Spare Parts Sales Engineer/Executive is responsible for selling a wide range of spare parts for heavy and industrial equipment. The role involves managing and supporting existing clients, identifying new sales opportunities, and expanding the customer base. By providing timely and accurate parts solutions, the Sales Engineer contributes to customer satisfaction and long-term business growth while advancing their own sales career.</p><p>&nbsp;</p><p><br></p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p>Mandatory requirements:-</p><p>&nbsp;</p><ul><li>Locally in Kuwait</li><li>Clear English/Arabic Communication skills</li><li>Mechanical Bachelors Degree&nbsp;</li><li>Experience 2 years or more experience in spare parts sales or after-sales support for heavy and industrial equipment (e.g., construction, material handling, road equipment)</li><li>Strong understanding of mechanical components and spare parts, including engines, hydraulics, filters, undercarriage parts, etc.</li><li><b>Sales Skills-</b>Proven experience in B2B sales, negotiation, and customer relationship management.</li><li><b>Computer Proficiency-</b>Familiarity with ERP systems (like SAP, Oracle, or similar), MS Office, and CRM tools for managing quotations, orders, and customer data.</li><li><b>Must have a valid Kuwait Driving License</b></li><li>Ability to understand technical issues, read part diagrams, and suggest accurate spare parts solutions.</li><li><b>Must have </b>Strong commitment to customer service and responsiveness to inquiries, orders, and after-sales support.</li></ul><p>Kindly acknowledge and confirm.</p><p><br></p></div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> To provide the best shopping experience to each and every customer through Outstanding Customer Service.<br> <br> To be the brand advocate and the face of the store and contribute to the efficiency of operational processes and standards including stock management.<br> <br> To ensure that customers get a positive first impression of the stores for them to be willing to come back later.<br> <br> Stock<br> <br> Ensure products are stocked and displayed to the right levels as per guidelines and management direction.<br> <br> Support in receiving and displaying new arrivals.<br> <br> Participate in stock count / inventory taking.<br> <br> Participate in products replenishment.<br> <br> Handle products with utmost care in store and at POS area to avoid damages.<br> <br> Job Context<br> <br> Accountable for ensuring the proper implementation and efficiency of sales, operational standards, customer service, visual merchandise, and promotional plans.<br> <br> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills">Skills and Knowledge<br> <br> Strong verbal and written communication skills.<br> <br> Excellent Customer Service Skills.<br> <br> Pleasant personality.<br> <br> Passion for the Retail/Fashion Industry.<br> <br> Ability to make relationship with customer, convince and upsell skills.<br> <br> Proven ability to drive positive customer experiences that build loyalty and deliver measurable results.<br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Description</b></p><p>This role serves as the main point of contact, providing a warm and premium experience for all clinic visitors. They manage the front desk by handling appointments and answering patient inquiries via phone, email, and messaging. Overall, the role ensures high patient satisfaction while keeping daily clinic operations running smoothly. This role is suited for a professional who has worked in reputable clinics and is capable of delivering a seamless, polished front-desk operation.</p><p><br></p><p>Role &amp; Responsibilities:&nbsp;&nbsp;&nbsp;</p><ul><li><b>Reception &amp; hospitality:</b> Welcome patients and visitors warmly in Arabic and English, ensuring a courteous, professional, and comfortable front-of-house experience.</li><li><b>Appointment management: </b>Schedule, confirm, reschedule, and follow up on appointments using the clinic booking system; manage the daily calendar to minimise wait times and gaps.</li><li><b>Communications: </b>Answer incoming calls, WhatsApp/social messages, and emails promptly; respond to enquiries about services, pricing, and availability, and route matters to the right team member.</li><li><b>Patient registration: </b>Register new patients, verify personal and insurance details, and maintain accurate, confidential records in the clinic management system.</li><li><b>Billing support: </b>Process payments, issue invoices and receipts, handle deposits, and reconcile the daily cash/card float.</li><li><b>Coordination: </b>Coordinate with clinical staff on patient flow, notify practitioners of arrivals, and manage the waiting area.</li><li><b>Front desk upkeep: </b>Keep the reception and waiting areas clean, presentable, and well-stocked with forms and marketing materials.</li><li><b>Administration: </b>Support light administrative tasks — filing, follow-up reminders, feedback collection, and assisting with promotions or campaigns as needed.</li></ul><p><br></p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p><b>What we offer</b></p><p>In addition to a competitive tax-free salary and excellent benefits, you'll work in a professional, collaborative environment with a diverse team and numerous opportunities. Our client offers a rewarding career experience and is excited to connect with individuals seeking new challenges.</p><p><b>Who you are</b></p><p>You are excellent in customer service, with strong organizational, communication, and time-management skills. You represent the company’s standards—professional, detail-oriented, and committed to an outstanding patient experience. Strong ability to manage patient flow, stay organized, be proactive, and perform under pressure.</p><p><br></p><p>Skills &amp; Competencies:</p><ul><li>Warmly greet incoming visitors</li><li>Handle requests and resolve complaints professionally</li><li>Maintain a welcoming and well-presented lobby</li><li>Proactive, team-oriented, with genuine care for patients</li><li>Professional appearance and positive attitude with strong customer-service skills</li><li>Familiarity with social media enquiries and basic CRM follow-up</li><li>Proficiency with office software, email, and spreadsheets</li></ul><p>Education &amp; Qualifications:</p><ul><li>High school diploma or equivalent</li><li>Diploma or degree in administration, hospitality, or related field is an advantage</li><li>Minimum 1–2+ years’ experience in clinic, spa, or front-desk customer service</li><li>Prior experience in a medical, dermatology, or aesthetics clinic</li></ul><p><br></p></div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Description</b></p><p>This role supports physicians during consultations and procedures while safely performing treatments like lasers, chemical peels, and microneedling. You handle end to end patient care, including taking medical histories, giving medications, and guiding patients on pre- and post-treatment care. Additionally, you will ensure safety and compliance by keeping accurate medical records, maintaining clean treatment rooms, and monitoring patient recovery.</p><p><br></p><p>Role &amp; Responsibilities:</p><ul><li><b>Clinical support: </b>Assist physicians during dermatological consultations, minor surgical procedures, and cosmetic treatments, ensuring patient comfort and safety throughout.</li><li><b>Aesthetic treatments: </b>Perform and support aesthetic procedures within scope of practice and clinic protocols including laser and IPL treatments, chemical peels, microneedling, hydra facials, mesotherapy, and skin analysis; assist with injectable procedures (botulinum toxin, dermal fillers) as delegated and supervised. (A plus)</li><li><b>Procedure preparation:</b> Prepare treatment rooms, sterilise and set up instruments, verify equipment calibration, and ensure all consumables and emergency supplies are stocked and in date.</li><li>Patient care: Take patient histories, document skin conditions, complete consent forms, and provide clear pre-treatment instructions and post-treatment aftercare guidance.</li><li><b>Medication &amp; monitoring: </b>Administer medications and topical agents as prescribed, and monitor patients for adverse reactions, escalating any complications to the supervising physician promptly.</li><li><b>Documentation: </b>Maintain accurate, confidential electronic patient records, treatment logs, and photographic documentation of results.</li><li><b>Safety &amp; compliance: </b>Adhere to infection-control, health-and-safety, and clinical-governance standards; participate in audits and equipment maintenance schedules.</li><li><b>Patient education: </b>Educate patients on skincare regimens and recommend appropriate products and follow-up treatments in line with their care plan.</li><li><b>Stock control: </b>Support inventory management of medical and cosmetic stock, flagging reorder needs to the clinical lead.</li></ul><p><br></p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p><b>What we offer</b></p><p>In addition to a competitive tax-free salary and excellent benefits, you'll work in a professional, collaborative environment with a diverse team and numerous opportunities. Our client offers a rewarding career experience and is excited to connect with individuals seeking new challenges.</p><p><b>Who you are</b></p><p>You are a dedicated nurse with excellent communication skills and good knowledge of cosmetic dermatology procedures. You understand patients’ needs and expectations, provide high-quality care, and stay updated with the latest aesthetic technologies and treatments.</p><p><br></p><p>Skills &amp; Competencies:</p><ul><li>Hands-on experience with laser/IPL, injectables, and energy-based treatments</li><li>Knowledge of skin types, dermatological conditions, and cosmeceuticals</li><li>Calm, reassuring, and discreet bedside manner</li><li>Skilled in assisting with aesthetic procedures</li><li>Strong attention to detail and clinical safety</li><li>Excellent patient care and communication skills</li><li>Professional appearance and positive attitude</li><li>Able to work in a fast-paced, team-oriented environment</li><li>Commitment to continuous learning and new technologies</li></ul><p>Education &amp; Qualifications:</p><ul><li>Bachelor’s degree or diploma in Nursing</li><li>Valid nursing license in Kuwait</li><li>Minimum 2 years’ post-qualification experience, including 1 year in dermatology/aesthetics</li><li>BLS certification</li><li>Experience with EMR and clinic management systems</li><li>Certification/training in aesthetic or cosmetic procedures</li><li>Able to assist doctors with injectable and aesthetic procedures</li></ul><p><br></p></div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>We are looking for enthusiastic and customer-focused Sales Associates to join our retail team. The ideal candidate will be passionate about fashion, customer service, and sales, with the ability to create an exceptional shopping experience while contributing to store performance and sales targets.</p><p>As a Sales Associate, you will play a key role in assisting customers, promoting products, maintaining store standards, and supporting the overall success of store operations.</p><p><br></p><p>Key Responsibilities</p><ul><li>Greet customers and provide a welcoming shopping experience.</li><li>Understand customer needs and recommend suitable products and styles.</li><li>Deliver excellent customer service and build positive customer relationships.</li><li>Achieve individual and store sales targets through effective selling techniques.</li><li>Identify opportunities for cross-selling and upselling.</li><li>Maintain strong product knowledge, including sizes, materials, and seasonal collections.</li><li>Ensure the sales floor, fitting rooms, and displays are clean, organized, and visually appealing.</li><li>Replenish merchandise and assist with stock management.</li><li>Handle customer inquiries, exchanges, and complaints professionally.</li><li>Process sales transactions accurately using the POS system.</li><li>Comply with company policies related to cash handling, discounts, and returns.</li><li>Support visual merchandising initiatives and promotional activities.</li><li>Work collaboratively with team members to ensure smooth daily operations.</li><li>Maintain a professional appearance that reflects the brand image.</li></ul><p>Education &amp; Experience</p><ul><li>High School Diploma or equivalent.</li><li>Diploma or certification in Business, Marketing, Fashion, or a related field is an advantage.</li><li>Minimum 1 year of experience in retail sales.</li><li>Experience in fashion, lifestyle, or luxury retail is preferred.</li></ul><p><br></p><p>Skills &amp; Competencies</p><ul><li>Strong customer service and interpersonal skills.</li><li>Sales-driven with a passion for achieving targets.</li><li>Excellent communication skills.</li><li>Ability to work in a fast-paced retail environment.</li><li>Strong attention to detail and organizational skills.</li><li>Basic computer and POS system knowledge.</li><li>Professional and presentable appearance.</li><li>Team-oriented with a positive attitude.</li></ul><p><br></p><p><br></p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p>Language Requirements</p><ul><li>Fluent in Arabic.</li><li>Good command of English.</li></ul><p>We need candidates who are:</p><ul><li>Customer-focused individuals with a passion for retail and fashion.</li><li>Energetic and motivated professionals who enjoy interacting with customers.</li><li>Candidates who can work flexible shifts, including weekends and public holidays.</li><li>Individuals who take initiative and contribute positively to the team environment.</li></ul><p><br></p></div>

<div> <p> <strong>POSITION SUMMARY</strong> </p> <p> </p> <p>Our Utility Cleaners play an important role in support of a number of vital hotel functions. At our hotels these associates may work across departments (e.g., kitchen, food and beverage, laundry) to support cleaning needs. Whether preparing fresh clean linen and spotless dining ware for guests to enjoy, operating and maintaining cleaning equipment and tools (e.g., dish washing machines, hand wash stations, linen washers and dryers), or transporting dishware or linens across the hotel, these associates do whatever it takes to get the job done.</p> <p> </p> <p>No matter what position you are in, there are a few things that are critical to success creating a safe workplace, following company policies and procedures, upholding quality standards, and ensuring your uniform, personal appearance, and communications are professional. Ensure adherence to quality expectations and standards, develop and maintain positive working relationships with other employees and departments, support team to reach common goals, and listen and respond appropriately to the concerns of other employees. Report accidents, injuries, and unsafe work conditions to manager. Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance. Stand, sit, or walk for an extended period of time. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Perform other reasonable job duties as requested by Supervisors.</p> <p> </p> <p><b><br></b></p><p><b>PREFERRED QUALIFICATIONS</b></p> <p>Education: No high school diploma or G.E.D. equivalent.</p> <p>Related Work Experience: No related work experience.</p> <p>Supervisory Experience: No supervisory experience.</p> <p>License or Certification: None</p> <p> </p> <p> </p> </div> <div> </div> <p><br></p>

<p><br></p><p><strong>Roles &amp; Responsibilities:</strong></p><p><strong>Troubleshooting and Repairs:</strong> Diagnosing mechanical problems, faults and malfunctions in mechanical equipment and systems, using diagnostic tools, equipment manuals, and technical documentation to troubleshoot complex mechanical issues and implementing effective solutions to restore functionality and minimize downtime. Communicate equipment problems or break down information via Senior Tool Pusher to technical maintenance support team.</p><p><strong>Equipment Maintenance &amp; Operations:</strong> Maintaining the reliability and integrity of rig mechanical equipment and systems, including drilling, mechanical, and safety systems. Overseeing the maintenance, repair, and servicing of mechanical equipment at location, including but not limited to engines, generators, pumps, compressors, cranes, and hydraulic systems, to ensure optimal performance of the rig. Survey the condition of all well control equipment in use each shift, report any system issues to the Senior tool pusher and raise corrective work order to manage the repair. Will inform by e mail both the Senior tool pusher and office based well control equipment superintendent of the equipment status so Contractual and API compliance can be assessed. Ensure that repairs, needed or made, are registered in the form of a work order in the company maintenance system. Carry out Planned maintenance work orders on time with good quality and record actual work done, inform Senior Tool pusher where access to perform work is not granted. Ensure Mechanical and Drill crew reference OEM manuals when carrying out PM or CM work on any rig equipment do not reply solely on the PM work instruction. Supervise the oil sample program and review the results, ensure work orders are raised to rectify bad samples. Spot check lubrication carried out by drilling crew for quality. Maintain and repair power plants and monitor power distribution ensure power is always available. Verification and inspection of third-party equipment and installations when required. Ensure new equipment installations on the drilling unit are managed by management of change Synergi case where appropriate as outlined in the ADES management system by highlighting the potential need to Senior Tool Pusher.&nbsp;</p><p><strong>Materials &amp; Equipment:</strong> Plan and coordinate with the Senior Tool Pusher and other departments to secure equipment s and perform safety inspections prior to any operations or major activity such as rig moves, running &amp; retrieving BOP. Ensuring that the appropriate mechanical requirements of the statutory and regulatory bodies including the classification society are adhered to and records maintained. Maintain inventory of spare parts, consumables, and supplies for mechanical equipment, ensuring adequate stock levels are maintained to support ongoing operations and maintenance activities. Coordinating with procurement and logistics teams to procure spare parts and replacement components as needed, ensuring timely delivery, availability &amp; compliance with the class &amp; certification requirements. Responsible for housekeeping standards in machinery and workshop areas. Machine and switchboard areas to be kept clear of all flammable materials.</p><p><strong>Rig Move:</strong> Ensure that all mechanical equipment s are properly secured and protected for transportation, while overseeing the disassembly and loading of equipment s onto transport vehicles. Supervise the rig move crew to reassemble and install all mechanical equipment s at the new location and perform the final checks on the system to ensure they are ready for drilling operations.</p><p><strong>Client Management:</strong> Promote and maintain an effective working relationship with other departments, third party personnel and Client Representatives. Responds to client requests and needs concerning materials, equipment, and personnel after getting adequate management approval.</p><p><strong>Reporting and Documentation:</strong> Maintains proper logs and records of all mechanical maintenance activities, equipment inspections, and repairs in accordance with company procedures and regulatory requirements. Responsible for the quality of the Planned maintenance system work reports for PM and CM work orders for Mechanical department Prepare accurate and timely reports, including daily equipment status reports, incident reports, job safety analysis for hazardous activities. Ensure the permit to work and isolation systems are followed and applied. Supply information to assist in the development of maintenance and repair budget.</p><p><strong>People Management:</strong> Provide clear instructions to their team regarding their duties, responsibilities, and any necessary safety precautions prior to commencing work. Mentor, develop and train their team to ensure safe and effective operations. Identifies opportunities for skill and career advancement, works to support the professional growth of their team. Ensure their team receives the necessary required training to perform their duties safely and effectively through on-the-job training, and participation in safety drills and exercises. Support, promote and actively participate in ADES s Competency Assurance Program for their team. Evaluates the performance of their team on constant and fair feedback basis, identify areas for improvement, drive ADVANCE process to formalize a performance management culture.</p><p><strong>Job Requirements:</strong></p><p><strong>Education &amp; Experience:</strong> Formal training as mechanic in the form of a multi-year apprenticeship and or technical degree is preferred. Time served in the oil field as mechanic with relevant training certificates and references may be accepted in place of apprenticeship. Minimum three (3) years of working experience in the mechanical field in drilling and workover operations and have demonstrable supervisory skills. Preferred to have working experience on land rigs or offshore rigs.</p><p><strong>Skills/Competencies Required:</strong> Fluent in the English language (Spoken &amp; Written) PC literate in Microsoft Office Situation Awareness, Communication, Teamwork, detail oriented, Problem Solving.</p><p><strong>Physical Requirements:</strong> Regularly climbing (stairs, ladders). Regularly bending, twisting, and standing. Ability to work outdoors under all extreme weather conditions (Noise / Humidity / Cold / Heat). Ability to work at heights and in confined spaces. Ability to workday or night shift as required with 12 hours minimum shift.</p><p><strong>Certifications:</strong> As per ADES Training Matrix.</p><p><strong>Desired Candidate Profile</strong></p><p>Formal training as mechanic in the form of a multi-year apprenticeship and or technical degree is preferred. Time served in the oil field as mechanic with relevant training certificates and references may be accepted in place of apprenticeship. Minimum three (3) years of working experience in the mechanical field in drilling and workover operations and have demonstrable supervisory skills. Preferred to have working experience on land rigs or offshore rigs.</p><p><strong>Skills/Competencies Required:</strong> Fluent in the English language (Spoken &amp; Written) PC literate in Microsoft Office Situation Awareness, Communication, Teamwork, detail oriented, Problem Solving.</p><p><strong>Physical Requirements:</strong> Regularly climbing (stairs, ladders). Regularly bending, twisting, and standing. Ability to work outdoors under all extreme weather conditions (Noise / Humidity / Cold / Heat). Ability to work at heights and in confined spaces. Ability to workday or night shift as required with 12 hours minimum shift.</p><p><strong>Certifications:</strong> As per ADES Training Matrix.</p>

<p>CACI is seeking a MI Systems Maintainer Integrator II to support our mission critical Program in Kuwait. As the selected candidate, you will perform installation, integration, configuration, employment, preventive maintenance, precision alignment, detailed and complicated diagnostics, troubleshooting, corrective maintenance, electronics monitoring and teardown of complex Command, Control, Communications, Computers, Intelligence, Surveillance, and Reconnaissance (C4ISR) and systems supporting SIGINT, FISINT, GEOINT, HUMINT, CI, TECHINT, OSINT, and All Source Intelligence for tasking, collection, processing, exploitation, production and dissemination at all echelons from tactical to national in multi-domain environments.</p><p>Responsibilities:</p><ul><li>Conduct installation, de-installation, reconfiguration, modification work orders and updates of computer hardware and software in local, regional, or global intelligence architectures including NIPRNet, SIPRNet, JWICS, TDN2, Special Access Programs (SAP) networks and coalition networks.</li><li>Assist with configuration assessments, fielding, testing, modernization, reset, de-fielding, demilitarization and disposal of sensitive equipment.</li><li>Inspect, test, diagnose, troubleshoot, repair and perform preventive maintenance on complex antenna and radio frequency distribution systems.</li><li>Perform tests on electrical, electro-optical, and electro-mechanical equipment using multi-meters, oscilloscopes, signal generators, spectrum analyzers, bit error rate testers (BERT), and other complex and specialized test measurement and diagnostic equipment (TMDE), wire diagrams, logic and signal flow charts, technical manuals, troubleshooting charts, performance aids, schematic, and logic diagrams.</li><li>Repair analog and fiber optics cables.</li><li>Perform pre and post flight inspections on Guardrail Common Sensor (GRCS) mission equipment and data link.</li><li>Submit standard and non-standard repair parts requests.</li><li>Prepare equipment for transportation or shipment.</li><li>Prepare maintenance, property accountability, and transportation forms and records.</li><li>Able to maneuver in small spaces and lift up to 50lbs.</li></ul><p><br></p><p><strong>Desired Candidate Profile</strong></p><p>Associate Degree in Electronics or related field from an accredited college/university + 4 years of relevant experience OR Six years of military training in MI Systems Maintenance and Integration may be considered in lieu of degree</p><p>Experience on maintenance and integration on one or more of the following: GRCS; Enhanced Medium Altitude Reconnaissance Surveillance System (EMARSS) mission equipment; Tactical Command Data Link (TDCL); GRCS Operational Ground Station (OGS); Distributed Common Ground Station- Army (DCGS-A); software defined SIGINT collection platforms; biometrics collection, processing, exploitation, and dissemination equipment; CI/HUMINT support systems; TROJAN systems or satellite communication terminals providing TDN2; TENCAP systems; or intelligence non-standard equipment.</p><p>Information assurance certifications for Tier I and II computer, servers, networks and global intelligence architectures integration and maintenance are desired.</p><p>US Citizen with active TS/SCI clearance is required</p><p>Willing to work shift work, to include weekends and potentially holidays.</p><p>Must be able to meet the requirements to obtain a work Visa 18 for Kuwait</p>

<div> <p> <strong>JOB SUMMARY</strong> </p> <p> </p> <p>Functions as the strategic business leader of the property's Hotel Operations. Areas of responsibility may include Front Office, , Recreation/Health Club, Housekeeping, Food and Beverage/Culinary and Engineering/Maintenance. Position works with direct reports (department heads) to develop and implement departmental strategies and ensures implementation of the brand service strategy and brand initiatives. The position ensures Hotel Operations meet the brand s standards, targets customer needs, ensures employee satisfaction, focuses on growing revenues and maximizes the financial performance of the department and developing positive owner relations. Develops and implements property-wide strategies that deliver products and services to meet or exceed the needs and expectations of the brand s target customer and employees and provides a return on investment.</p> <p> </p> <p> <strong>CANDIDATE PROFILE </strong> </p> <p> </p> <p> <strong>Education and Experience</strong> </p> <p> 2-year degree from an accredited university in Business Administration, Hotel and Restaurant Management, or related major; 4 years experience in the guest services, front desk, housekeeping, sales and marketing, management operations, or related professional area.</p> <p>OR</p> <p> 4-year bachelor's degree in Business Administration, Hotel and Restaurant Management, or related major; 2 years experience in the guest services, front desk, housekeeping, sales and marketing, management operations, or related professional area.</p> <p> </p> <p> <strong>CORE WORK ACTIVITIES</strong> </p> <p> </p> <p> <strong>Managing Profitability</strong> </p> <p> Demonstrates and communicates key drivers of guest satisfaction for the brand s target customer.</p> <p> Analyzes service issues and identifies trends.</p> <p> Makes and executes the necessary decisions to keep property moving forward toward achievement of goals.</p> <p> Works with hotel management team to develop an operational strategy that is aligned with the brand s business strategy and leads its execution.</p> <p> </p> <p> <strong>Managing Revenue Goals</strong> </p> <p> Monitors hotel operations sales performance against budget.</p> <p> Reviews reports and financial statements to determine hotel operations performance against budget.</p> <p> Coaches and supports operations team to effectively manage occupancy &amp; rate, wages and controllable expenses.</p> <p> Reviews the Wage Progress Report and compares budgeted wages to actual wages, coaching direct reports to address problem areas and holding team accountable for results.</p> <p> </p> <p> <strong>Leading Operations and Department Teams</strong> </p> <p> Champions the brand s service vision for product and service delivery and ensures alignment amongst the hotel leadership teams.</p> <p> Develops systems to enable employees to understand guest satisfaction results.</p> <p> Communicates a clear and consistent message regarding departmental goals to produce desired results.</p> <p> </p> <p> <strong>Managing the Guest Experience</strong> </p> <p> Reviews guest feedback with leadership team and ensures appropriate corrective action is taken.</p> <p> Responds to and handles guest problems and complaints.</p> <p> Stays visible and interfaces with customers on a regular basis to obtain feedback on quality of product, service levels and overall satisfaction.</p> <p> Creates an atmosphere in all Rooms and Food and Beverage areas that meets or exceeds guest expectations.</p> <p> </p> <p> <strong>Managing and Conducting Human Resources Activities</strong> </p> <p> Facilitates the development of creative solutions to overcome obstacles and ensures implementation to continually improve guest satisfaction results.</p> <p> Ensures employees are treated fairly and equitably.</p> <p> Ensures that regular, ongoing communication is happening in Operations (e.g., pre-shift briefings, staff meetings).</p> <p> Fosters employee commitment to providing excellent service, participates in daily stand-up meetings and models desired service behaviors in all interactions with guests and employees.</p> <p> Incorporates guest satisfaction as a component of staff/operations meetings with an emphasis on generating innovative ways to continually improve results.</p> <p> Sets goals and expectations for direct reports using the performance review process and holds staff accountable for successful performance.</p> <p> Solicits employee feedback, utilizes an open door policy and reviews employee satisfaction results to identify and address employee problems or concerns.</p> <p> Ensures property policies are administered fairly and consistently, disciplinary procedures and documentation are completed according to Standard and Local Operating Procedures (SOPs and LSOPs) and supports the Peer Review Process.</p> <p> Conducts annual performance appraisal with direct reports according to Standard Operating Procedures.</p> <p> Champions change, ensures brand and regional business initiatives are implemented and communicates follow-up actions to team as necessary.</p> <p> </p> </div> <div> </div> <p><br></p>

<p>The Non-Destruction Inspection Technician (NDI) II inspects aerospace weapon systems components and support equipment for structural integrity using nondestructive inspection methods and performs fluid analysis.</p><p>Determine test method and prepare fluids and parts for nondestructive inspection.</p><p>Interpret nondestructive inspection test results and provide information about defects to repair center.</p><p>Analyze wear metal content reports on engine lubricating oil and other fluids and recommend corrective action.</p><p>Establish radiation areas for radiographic operations.</p><p>Compute and monitor personal exposure areas for radiographic operations, and monitor personnel exposure data.</p><p>Perform nondestructive inspection on structures, components, and systems.</p><p>Detect flaws such as cracks, delamination s, voids, processing defects, and heat damage using penetrate testing, eddy current, magnetic particle, radiographic, optical, and ultrasonic test equipment.</p><p>Determine metallurgical information of components according to alloy, temper, conductivity, and associated factors.</p><p>Operate, maintain, and inspect nondestructive equipment.</p><p>Perform operator maintenance and service inspections on shop equipment and tools.</p><p>Ensure lock out and tag out procedures are accomplished prior to maintenance on equipment.</p><p>Perform silver recovery functions.</p><p>Handle and dispose of hazardous waste and materials.</p><p>Perform other qualified duties as assigned.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>High school diploma or equivalent required.</li><li>U.S. military technical school or specialized training course is desired, certification of education level is required.</li><li>Completion of a initial Non Destructive Inspection Level II training Course and current basic qualification.</li><li>Three (3) or more years experience as an aviation inspector and a minimum of one year experience on the assigned(MDS) airframe . (UH60, AH64, CH47 )</li><li>Shall be trained and qualified per NAS 410 or ASNT-CP-189 to the level assigned.</li><li>Must be in possession of a U.S. Passport with 3 years of validity remaining at the time of hire and be able to travel internationally.</li><li>Must be a US Citizen.</li><li>Ability to obtain and maintain a US Government Security Clearance, NAC-I T1 Public Trust. ** US Citizenship is required to obtain a T1/CAC NACI Clearance.</li><li>Able to clear CENTCOM Medical requirements for deployment.</li><li>Ability to obtain and maintain Kuwait Visa</li><li>Previous experience in the maintenance, modification and repair of tactical aircraft systems of the type being serviced and their associated components (UH60, AH64, CH47).</li><li>Have the skills and knowledge to set up and standardize equipment, conduct tests, interpret and evaluate for acceptance or rejection, and document.</li><li>Thoroughly familiar with the scope and limitations of the technique/method in which they are certified.</li><li>Capable of providing the necessary guidance and supervision to trainers and Level I personnel in the technique/method in which they are certified.</li><li>Familiar with the codes, standards, and other contractual documents that control the method as utilized by the employer.</li><li>Capable of developing written instructions from approved general procedures. Such instructions shall require final approval by a Level III.</li><li>Knowledge of electrical, mechanical, electronic, hydraulic and pneumatic systems or other technology as applicable to fabrication, repair, operation and maintenance requirements.</li><li>Efficient in record keeping and preparation of reports; capable of reviewing other people's work and determining accuracy and conformity to standards.</li><li>Proficient in the use of the Unit Level Logistics System-Aviation Enhanced (ULLS-AE), the current maintenance management system utilized to maintain Army aircraft forms and records.</li><li>Comprehensive knowledge of aircraft mechanical component troubleshooting/repair procedures and replacement of components.</li><li>Thorough knowledge of aircraft sheet metal/structural modification and repair and the ability to determine functionality of non-complex electrical systems.</li><li>Detailed knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, cable tensiometers, sheet metal brakes and sheers, etc. is required.</li><li>Ability to provide technical support to structural/mechanical engineers and customers.</li><li>Excellent organizational skills in prioritizing workload to meet aircraft delivery schedule.</li><li>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day</li><li>Must be able to climb stairs, ramps, ladders, and work stands</li><li>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders</li><li>May be required to lift heavy objects whose weight may exceed 50 pounds</li><li>Must be able to type using a standard keyboard to communicate through e-mail and various software applications</li><li>Will handle dirty parts and lubricants</li><li>Will be required to wear proper Personal Protective Equipment (PPE)</li><li>Must be able to pass a Respirator Physical and Fit Test qualification</li><li>May be required to operate power vehicles, machinery, hand tools, ground support equipment, fork lift, etc.</li><li>Must be able to lift/push/pull minimum of 50 pounds</li><li>May work in maintenance shop or outside</li><li>Must be able to work in a shop where the environment is drafty, noisy, and dirty</li><li>May be exposed to extreme noise from operating equipment</li><li>May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.</li></ul>

<p>To ensure that production/results progress according to schedules. Hygiene and quality standards are maintained, and personnel are utilized in a efficient manner. Roles and Responsibilities: Deputize the Senior QC Affairs Manager. Assess compliance of the finished product against regulations, claims, standards, labeling parameters of all the markets where the products are being sold and report the respective KPIs. Support in the management of all the legal, regulatory and customer standards for KDD, for all our markets and ensure they are kept up to date. Liaise with the local authorities in Kuwait and within the wider GSO region to maintain a strong working relationship with KDD. Ensure that Arabic and English translations are available for all standards. Manages quality systems downstream in the supply chain - i.e. warehouses, distribution and eventually customers, including traceability assessment. Provide training on compliance and other quality matters as assign in warehouses, external partners and internally as required. Support the technical approval of artwork for new products and existing product and packaging changes, verify barcodes, and maintain the respective processes in Oracla and RDnl. To work closely and provide guidance to the R&amp;D department to ensure all new products, ingredients and packaging comply to local and internation authority requirements. Supporting the customer complaint process, by communicating those to the QA Team for investigation and replying to customers on investigation results and enquiries from the KDD support website. Support the process of certification of Quality Marks for relevant KDD products and ensuring all renewals are completed in a timely manner. Support in the fresh milk farms management and report the respective weekly and monthly compliance KPIs. Assist in the visits and inspections by all authorities to KDD premises and communicating to the business any required changes. Working with the Purchasing department regarding Co-packed products within the Gulf region. Participate in Adhoc projects or other tasks as assigned by his Senior. Complying with Health, Safety and Environment regulations and working practices of KDD and the State of Kuwait when carrying out duties.</p><p><strong>Desired Candidate Profile</strong></p><p>Required Education: Bachelor's degree preferable in Food Science and Technology. Required Professional Skills: A minimum of 7 years' experience in QA, Development or Regulatory within a food manufacturing facility. Preferably certified quality and food safety auditor Understanding of food safety risk and compliance concepts Previous experience working with regulators, authorities, auditors, and legislative systems.</p>

<p>Employee will be part of the Deployment Pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules. Member will perform and inspect organizational and intermediate level maintenance and modifications on RPA systems and support equipment, as required. Lastly, this position requires an individual that can apply basic technical knowledge to solve complex problems by interpreting Air Force technical orders, manufacturers manuals/instructions or similar documents through the usage of test equipment/instruments to affect repairs. Member will inspect, service, repair, and overhaul aircraft, aircraft engines, and other critical components to ensure airworthiness. Repair, replace, and rebuild aircraft structures, landing gear, power plants/trains, fuel systems, and functional components using hand tools, power tools, welding equipment, rivet guns and drills. Inspect and repair power plant malfunctions, including cracked components, oil leaks, etc.; diagnose malfunctions, isolate causes and correct breaks; test engine operations, use test equipment to locate source of malfunction(s). Replace/repair damaged components and remove engine/major components from aircraft, using hoist or other lifting devices; disassemble and inspect parts for wear, warping, or other defects; repair/replace defective engine components and reassemble and install engines in aircraft; adjust, repair, or replace instruments, ADP flight controls, electrical/electronics, fuel/oil systems and associated aircraft accessories. Perform aircraft services to include engine flushing/cleaning, parts lubrication, and required maintenance checks. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies. Recommend revisions to maintenance procedures to improve efficiency and ensure quality workmanship.USAF equivalent position is Aircraft Mechanic Apprentice.</p><p>Essential Responsibilities:</p><ul><li>Performs all daily launch/recovery duties in support of operational requirements.</li><li>Applies logic and good judgment, understands basic technical order diagrams and procedures, and uses test equipment for analysis of airframes, engines, flight controls, pneudraulic, fuel, electrical / electronic systems, and problems.</li><li>Supports aircraft utilization and maintenance activity schedules. Maintains accurate parts inventory during all maintenance activities. Performs maintenance and repair tasks and ensures their successful completion.</li><li>Services, repairs, and overhauls aircraft equipment, engines, and sub-systems to ensure serviceability. Repairs, replaces, and rebuilds aircraft structures, landing gear, power plants, fuel systems (including tanks and fuel/metering control systems), and functional components using hand tools, power tools, welding equipment, rivet gun, drills, and other tools.</li><li>Inspects and repairs power plant (engine) malfunctions, including cracked components, oil leaks, etc. Diagnoses malfunctions, isolate causes and corrects breaks. Tests engine operations, using testing equipment to locate source(s) of malfunction. Replaces and repairs damaged components, uses hand tools, gauges, and test equipment to complete repairs.</li><li>Removes engine and major components from aircraft equipment, using hoist or other lifting devices. Disassembles and inspects parts for wear, warping, or other defects. Repairs and replaces defective engine components and reassemble and installs engine in aircraft.</li><li>Adjusts, repairs, or replaces instruments, flight control, electrical/electronic, fuel/oil systems and aircraft accessories. Performs aircraft and vehicle services, including engine wash/cleaning, parts lubrication, and maintenance checks.</li><li>May service engines and airframe components at flight line operations making repairs, short of overhaul, required to ensure aircraft safe operating conditions. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies.</li><li>Must be able to work with little-to-no supervision.</li><li>Performs all other duties as assigned as requested.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Must have High school diploma or have completed relevant military and/or vocational technical school curriculum.</li><li>Minimum of one year of actual Aircraft Mechanic maintenance experience required.</li><li>Must have basic knowledge of basic and complex mechanical maintenance and repair.</li><li>Must possess basic knowledge of technical publications related to aircraft mechanical maintenance.</li><li>Must know theory and principles of operation of engines, accessories and components, theory of flight and electronic flight controls, and have a basic understanding of applicable systems.</li><li>Must be able to inspect and operate ground support and auxiliary equipment.</li><li>Must achieve a passing grade in all required courses/certifications for continued employment, as needed.</li><li>Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment.</li><li>Must be able to lift, carry and/or wear Military Issued Equipment in excess of 50 pounds for extended periods.</li><li>Must be able to speak, read, write, and understand English.</li><li>Must submit updated SF-86 within 30 days of hire start date.</li><li>Must have had an Active Secret US Government Clearance within the last 12 months. Note: US citizenship is required to obtain a Secret clearance.</li><li>Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment.</li><li>Must have current/active State Issued Driver s License.</li><li>Must be able to acquire and maintain a valid flight-line Government Driver s License.</li><li>Must have valid U.S. Passport with a minimum of two years remaining with at least two facing pairs (four total) of blank Visa pages.</li><li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li></ul><p>Preferred Qualifications</p><ul><li>Associate degree in a relevant career field.</li><li>Licensed by the FAA as an Airframe and Powerplant Mechanic.</li><li>RPA Deployment Experience.</li><li>Prior Experience as a Defense Contractor.</li><li>Aircraft Mechanic Experience within the last 10 years.</li><li>MQ-9 Experience as an Aircraft Mechanic.</li><li>MQ-9 Aircraft Composite Repair / Replacement Experience.</li></ul>

<p>The UH-60 Aircraft Mechanic AM-2 (UH-60 Army Aviation) performs the full range of military tactical aircraft maintenance and maintains repairs and troubleshoots malfunctions in aircraft structure, landing gear, flight surfaces and controls, anti-icing, pneudraulic, engines, auxiliary power unit, and ventilation and heating systems.</p><p><strong>Desired Candidate Profile</strong></p><p>With a valid (FAA) A&amp;P certificate (Preferred), Two (2) years of aviation maintenance experience, Two (2) years rotary wing aircraft experience, and Two (2) years on the assigned MDS UH-60 aircraft is Required. (See below for requirements without A&amp;P).</p><p>Valid US Passport and US Citizenship is Required to obtain the NAC-I clearance and for facility access.</p><p>Remove and install aircraft subsystem assemblies and components such as engines, rotors, transmissions, mechanical flight controls and their components.</p><p>Safely prepare aircraft for inspections and maintenance checks and services.</p><p>Perform scheduled inspections and assist in performing special inspections.</p><p>Perform limited maintenance operational checks and diagnoses and troubleshoots aircraft systems using special tools and test equipment as required.</p><p>Apply comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as aircraft Technical Manuals, Maintenance Information and Action Messages and all technical guidance provided through government official representatives.</p><p>Maintain and repair aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components.</p><p>Apply technical knowledge of airframe and power plant systems in determining equipment malfunctions and use required expertise in restoring equipment condition and or operation.</p><p>Participate in maintenance test flights and operation checks as required.</p><p>Perform other duties as requested.</p><strong>Minimum Requirements :</strong><p>High School Diploma or Equivalent is required.</p><p>With a valid (FAA) A&amp;P certificate, Two (2) years of aviation maintenance experience, Two (2) years rotary wing aircraft experience, and Two (2) years on the assigned MDS UH-60 aircraft is Required.</p><p>All experience must be within the Five (5) most recent years.</p><p>Without a valid (FAA) A&amp;P certificate; Must have Three (3) years aviation maintenance experience, Three (3) years of rotary wing aircraft experience, and a minimum of Three (3) years on the assigned UH-60 Mission Design Series (MDS) is Required.</p><p>All experience must be within the Six (6) most recent years.</p><p>U.S. Military Technical school or specialized training course is desired, certification of education level is required.</p><p>A Valid US Passport is Required for deployment to Kuwait. The Passport must have 3 years remaining before expiring, and 6 Blank pages available at the time of hire and deployment.</p><p>Must be able to pass and clear CENTCOM Army MOD Physical and requirements for deployment (will attend CRC/ DIDC Training).</p><p>Must be able to obtain Kuwait PCC clearance and Visa, prior to deployment.</p><strong>Security Clearance Requirements:</strong><p>Must be able to obtain and maintain a US Govt NAC-I (T1) Public Trust Security Clearance. Must be able to obtain and maintain facility credentials/authorization. US Citizenship is required to obtain a Clearance and for facility credentials/authorization to work at this facility.</p><strong>Additional and Preferred Qualifications :</strong><p>Thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts.</p><p>Broad knowledge of aircraft sheet metal/structural modifications and repair.</p><p>Basic knowledge of electrical theory and a thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers.</p><p>Working knowledge of technical publications and Logistics Information Systems.</p><p>Able to prioritize workloads to maintain schedules on assigned projects and may be required to lead teams through more complex aircraft relevant tasks.</p><p>Participate in maintenance test flights and operation checks as required.</p><p>Possess the level of experience to inspect all required aeronautical type maintenance to be performed by Mechanics.</p><p>The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records.</p><strong>Physical Requirements/Working Environment</strong><p>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.</p><p>Must be able to climb stairs, ramps, ladders, and work stands.</p><p>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders.</p><p>May be required to lift heavy objects whose weight may exceed 50 pounds.</p><p>Must be able to type using a standard keyboard to communicate through e-mail and various software applications.</p><p>Will handle dirty parts and lubricants.</p><p>Will be required to wear proper Personal Protective Equipment (PPE).</p><p>Must be able to pass a Respirator Physical and Fit Test qualification.</p><p>May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, etc.</p><p>Must be able to lift/push/pull minimum of 50 pounds.</p><p>May work in maintenance shop or outside.</p><p>Must be able to work in a shop where the environment is drafty, noisy, and dirty.</p><p>May be exposed to extreme noise from operating equipment.</p><p>May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.</p><p>May be expected to work in austere environments and all-weather conditions</p>

<p>Dean School of Architecture &amp; Design Classification: Executive / Academic Leadership Reports To: Vice President for Academic Affairs (VPAA)</p><p>The Dean of School of Architecture and Design serves as the chief academic officer, providing strategic vision and operational leadership for the School. The Dean promotes excellence in teaching, scholarship, and community engagement; supports innovative academic programs; and advances diversity in faculty and student recruitment. The role also involves fostering interdisciplinary collaboration, strengthening connections with local and international communities, and enhancing the School's visibility and resources to support its academic mission and future growth.</p><p>Key Responsibilities</p><ul><li>Provide strategic leadership and operational oversight for the School of Architecture and Design, including faculty, academic programs, budgets, and administrative functions.</li><li>Lead faculty recruitment, evaluation, mentoring, and professional development while fostering a culture of research, scholarship, and creative activity.</li><li>Maintain engagement with the Industry Advisory Committee and strengthen partnerships with industry, professional organizations, and community stakeholders to support internships, experiential learning, and graduate employability.</li><li>Support studio-based learning, student exhibitions, competitions, portfolios, and professional practice opportunities.</li><li>Ensure effective representation of the School in university leadership activities and maintain accurate public communications regarding programs, achievements, and student opportunities.</li><li>Lead institutional and programmatic accreditation, quality assurance, assessment, and continuous improvement initiatives, with knowledge of American higher education accreditation standards.</li><li>Manage strategic planning, resource allocation, and budget oversight for the School.</li><li>Oversee Architecture, Interior Design, and Graphic Design programs, ensuring academic excellence through curriculum development, assessment, scheduling, accreditation, and continuous improvement.</li></ul><p><strong>Desired Candidate Profile</strong></p><h2>Minimum Qualifications:</h2><p>The ideal candidate shall demonstrate experience in professional and academic positions, as well as a strong record in teaching and outstanding academic achievements at the international level. The candidate is expected to demonstrate ongoing contributions in their field of specialization through published research in recognized international scientific journals, as well as participation in exhibitions, conferences, and symposiums, in addition to possessing the following degrees, qualifications, and professional experience:</p><ul><li>Ph.D. or equivalent from a recognized university.</li><li>Rank of Professor in Architecture, Interior Design, Graphic Design, or a related discipline.</li><li>Distinguished record of teaching, research, scholarship, creative activity, and/or professional practice, with ongoing contributions through publications, exhibitions, conferences, and professional engagement.</li><li>Proven academic leadership experience, preferably at Dean level or equivalent, with a demonstrated ability to lead strategic initiatives and School development.</li><li>Experience with accreditation, assessment, quality assurance, and continuous improvement processes within architecture, design, or related disciplines.</li><li>Familiarity with credit-hour and semester-based academic systems.</li><li>Knowledge of higher education administration, including budgeting, human resources, and operational management.</li><li>Strong communication, stakeholder engagement, and partnership-building skills.</li><li>Experience working within American or internationally accredited higher education systems preferred.</li><li>Demonstrated ability to lead creative, design-oriented academic disciplines.</li><li>English proficiency required; Arabic proficiency is an advantage.</li></ul><h2>Additional Qualifications</h2><p>Priority will be given to applicants with the following qualifications:</p><ul><li>Managerial experience and the skills necessary to launch pioneering projects.</li><li>Multi-cultural skills.</li><li>Active participation in reputable organizations.</li><li>Knowledge of the methods of evaluation and related matters.</li><li>Documentation demonstrating support for the achievements of teachers and students.</li><li>Understanding of the latest teaching methods, including the use of technology in the teaching process.</li><li>Demonstration of a commitment to enriching the educational experience of students.</li></ul>