وظائف مهندس ميكانيكا معدات ثقيلة

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Position Title: Gas Systems Mechanical Engineer</p><p>Sector: Contracting and Engineering Consultancies / Real Estate Development</p><p>Project Type: Residential complexes, towers, commercial malls, hotels, and restaurants.</p><p>Overall Objective of the Position:</p><p>Assume responsibility for the design, supervision, and execution of LPG/NG gas distribution networks for commercial and residential projects, ensuring compliance with the highest quality and safety standards, and fulfilling all requirements of the Saudi Civil Defense and Gas and Industrial Safety (GASCO).</p><p>Main Tasks and Responsibilities:</p><p>Design and Calculation of Works:</p><p>Perform engineering calculations for gas networks and determine pipe sizes based on gas flow rates and allowable pressure drops.</p><p>Determine the capacities of gas storage facilities and their suitable locations, ensuring safety distances according to applicable codes.</p><p>Select and approve materials and components (pipes, pressure regulators, fittings, leak detection systems).</p><p>Execution and Supervision on Sites:</p><p>Direct supervision of gas network installations and ensure the quality of welding and connections.</p><p>Ensure the installation of pipelines in safe and appropriate routes (e.g., using sleeves in standard ceilings and enclosed areas).</p><p>Manage and install safety systems (Solenoid Valves &amp; Gas Detection Systems) and connect them to the centralized fire alarm system in the building.</p><p>Regulatory Approvals and Coordination (within Saudi Arabia):</p><p>Prepare shop drawings and submit them for approval from the consultant and civil defense through the "Salama" platform.</p><p>Coordinate with GASCO to implement their requirements and facilitate the network inspection and storage filling process.</p><p>Testing and Commissioning:</p><p>Conduct pressure tests using nitrogen or dry air to verify the absence of leaks.</p><p>Issue safety certificates and final commissioning tests for the network before handing over the project to the owner or commissioning it.</p><p><br></p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p>Required Qualifications and Skills:</p><p>Educational Qualification: Bachelor's degree in Mechanical Engineering.</p><p>Professional Registration: Registered Professional Engineer with the Saudi Council of Engineers (SCE).</p><p>Experience: Minimum 3-5 years of experience in the design and execution of gas networks for commercial and residential projects within the Kingdom.</p><p>Technical Knowledge:</p><p>Thorough knowledge of the Saudi Building Code (SBC) and civil defense regulations and GASCO requirements.</p><p>Strong familiarity with international codes such as NFPA 54 (Fuel Gas Code) and NFPA 58 (Liquefied Petroleum Gas Code).</p><p>Engineering Software: Proficient in AutoCAD, and engineering calculation and design software for piping systems.</p><p>Work Location: In person</p></div>

<h3 >About the Opportunity</h3> <p >TASNEE is seeking a <strong >Technician V Mechanical</strong> to join our team in Al Jubail, Eastern Province, Saudi Arabia. This full-time role is open to professionals with <strong >2 to 5 years of experience</strong> in mechanical maintenance, offering a chance to contribute to our operational success.</p> <h3 >Role Purpose</h3> <p >The Mechanical Technician is responsible for providing essential, ongoing support to field maintenance staff, contractors, vendors, and other internal personnel. This role is critical for the effective planning, repair, and installation of various mechanical equipment, ensuring that all maintenance objectives are met efficiently.</p> <h3 >Key Responsibilities</h3> <ul > <li >Perform preventive and routine maintenance activities for mechanical equipment.</li> <li >Conduct equipment inspections, testing, and troubleshooting to diagnose issues.</li> <li >Provide technical support to resolve maintenance and operational challenges.</li> <li >Maintain accurate records, systems, and documentation related to maintenance activities.</li> <li >Support the planning, scheduling, and execution of maintenance and turnaround activities.</li> <li >Coordinate effectively with Operations, Reliability, and Engineering teams.</li> <li >Ensure strict compliance with all Health, Safety, and Environment (HSE) requirements.</li> </ul> <h3 >Required Experience</h3> <p >Candidates for this full-time position must possess <strong >2 to 5 years of relevant experience</strong> as a Mechanical Technician or in a similar maintenance role within an industrial environment.</p> <h3 >Work Environment</h3> <p >This role operates within a dynamic industrial setting in Al Jubail. The Mechanical Technician will work closely with various internal departments and external partners, emphasizing teamwork and adherence to safety protocols.</p> <h3 >About TASNEE</h3> <p >TASNEE is committed to operational excellence and maintaining a safe and productive environment. We value skilled professionals who contribute to our ongoing success.</p>

<div dir="rtl"><h3 >نبذة عن الوظيفة</h3> <p >تعلن شركة الزامل للصناعات المعدنيه الثقيله عن حاجتها لتوظيف <strong >مهندس صناعي</strong> للانضمام إلى فريقها في جدة، بمنطقة مكة المكرمة. هذه الوظيفة بدوام كامل وتوفر فرصة للمهندسين حديثي التخرج أو ذوي الخبرة المحدودة لتطبيق مهاراتهم في بيئة صناعية ديناميكية.</p> <h3 >الهدف من الدور</h3> <p >يهدف هذا الدور إلى إجراء دراسات معمقة للعمليات الإنتاجية والإجراءات الإدارية داخل الشركة. سيقوم المهندس الصناعي بتخطيط الاستخدام الأمثل للمرافق والمعدات والمواد والموارد البشرية بهدف تحسين كفاءة العمليات الإنتاجية بشكل مستمر، بالإضافة إلى إعداد الوثائق والتقارير المتخصصة التي توضح نتائج هذه الأعمال.</p> <h3 >المهام والمسؤوليات الرئيسية</h3> <ul > <li >دراسة وظائف الوحدات الإدارية وهياكلها التنظيمية، وتحليل المعلومات والبيانات المتعلقة بالمشروع (المصنع) لتحديد نقاط الازدواجية في الأدوار والمهام.</li> <li >تطوير برامج ومؤشرات قياس الأداء، وتحليل عينات من العمل لتطوير معايير ومؤشرات الاستفادة المثلى من المعدات.</li> <li >تحليل مدى وفاعلية الاستفادة من مجهودات العاملين، ودراسة المخطط التوزيعي لمعدات المصنع والبيانات التشغيلية مثل تكلفة الإنتاج ومسار العملية الإنتاجية والجداول الزمنية للإنتاج لتقييم كفاءة استخدام العاملين والمعدات.</li> <li >تطوير طرق تهدف إلى تحسين كفاءة العاملين وضبط استخدام المواد والمعدات، ومتابعة تنفيذ هذه الطرق.</li> <li >تطوير أساليب وإجراءات العمل ومواكبة التطورات التقنية الحديثة.</li> <li >إعداد الوثائق والتقارير المتخصصة بنتائج الأعمال والعمليات الهندسية، وعرضها وتوضيحها وحفظها في قاعدة البيانات الخاصة بها وفقاً للسياسات والإجراءات المعتمدة.</li> </ul> <h3 >المؤهلات والخبرات المطلوبة</h3> <ul > <li >خبرة تتراوح بين 0 إلى 1 سنة في مجال الهندسة الصناعية أو مجال ذي صلة.</li> <li >القدرة على تحليل البيانات وتقديم حلول عملية لتحسين الكفاءة.</li> <li >مهارات ممتازة في إعداد التقارير والعروض التقديمية.</li> </ul> <h3 >موقع العمل ونوعه</h3> <p >يقع مقر العمل لهذه الوظيفة في مدينة جدة، ضمن منطقة مكة المكرمة. الوظيفة بدوام كامل وتتطلب التواجد في موقع العمل.</p> <h3 >التقديم للوظيفة</h3> <p >ندعو المهندسين الصناعيين المؤهلين والمهتمين بهذه الفرصة للتقديم. سيتم التواصل مع المرشحين الذين تتوافق مؤهلاتهم مع متطلبات الوظيفة.</p></div>

<p>JOB SUMMARY: The B1 Mechanical Technician Senior will be responsible to ensure optimal service support for maintenance and flight line activities to achieve the excellent fleet availability with the highest quality and safety standards. The B1 Mechanical Technician Senior will also be responsible to perform detailed inspection, assembly, installation, repair or replacement of aircraft components and systems, maintenance (both scheduled and unscheduled) or refurbishing of aircraft and function check of components. The B1 Mechanical Technician Senior will perform OJT on location as required. The B1 Mechanical Technician Senior may also be responsible to support MRO department. LIST OF RESPONSIBILITIES: Comply with all Aviation, Safety, Quality and Export Control Regulations and Procedures Comply with all Airbus Helicopters Management Systems, Policies and Regulations Work as part of a team, specific duties will include the satisfactory performance of both scheduled and unscheduled maintenance of the helicopter fleet, within a customer environment Undertake individually or as part of a team, the aircraft maintenance, repair and inspection tasks, troubleshooting, quality checks and the completion of documentation in accordance with Company and Customer procedures Undertake individually or as part of a team, all daily preventive, corrective, servicing and routine maintenance works required to release the aircraft to fly Perform all scheduled and unscheduled activities to be on time, on cost and on quality while maintaining all safety requirements Conduct operational implementation on flight line (daily servicing, refueling, helicopter towing) Check every time before to start any maintenance activity tools/GSE s for condition and expiration date, and ensure their correct use Check every time before starting any maintenance activity the components and parts for conditions (damages, leaks etc.) and that the applicability of the documentation is correct Determine and perform maintenance requirements for parts, clearances, tolerance, fuel and hydraulic leaks and corrosion damage Interpret wiring diagrams, blueprints and technical publication Determine repair procedures necessary to correct defective equipment This job requires an awareness of any potential compliance risks and a commitment to act with integrity, as the foundation for the Company s success, reputation and sustainable growth.</p><p><strong>Desired Candidate Profile</strong></p><p><br></p>

<h3 >About the Role</h3> <p >Sanxing Electric is seeking a <strong >Procurement Engineer</strong> to join their team in Jeddah, Makkah, Saudi Arabia. This is a full-time position focused on driving purchasing strategies for medium-voltage cabinet components and optimizing supply chain operations for electrical power equipment manufacturing. The role requires 0-1 years of experience.</p> <h3 >Key Responsibilities</h3> <ul > <li >Formulate and execute procurement strategies specifically for medium-voltage cabinet components.</li> <li >Develop and manage relationships with local Saudi suppliers, including conducting qualification audits, negotiating prices, and managing contract terms.</li> <li >Conduct cost analysis, control purchasing costs, and optimize the overall supply chain efficiency.</li> <li >Track project needs and coordinate effectively with technical, quality, and production teams to ensure timely delivery of materials.</li> <li >Manage purchasing quality to ensure all products comply with Saudi and Middle Eastern standards.</li> <li >Handle the procurement of general office supplies and various miscellaneous production materials.</li> </ul> <h3 >Qualifications and Requirements</h3> <ul > <li >Must be a <strong >Saudi national</strong>.</li> <li >Bachelor’s degree or higher, with a preference for degrees in Engineering or STEM fields.</li> <li >Fluency in both <strong >English and Arabic</strong> is required for business communication.</li> <li >At least <strong >1 year of local Saudi procurement experience</strong> in electrical (power) equipment or mechanical components. Experience with switch gears, MV cabinets, or Ring Main Units is preferred; experience with other power distribution or mechanical products is acceptable.</li> <li >Familiarity with local Saudi suppliers for electrical equipment components, particularly sheet metal, copper busbars, and secondary components.</li> <li >Proven skills in supplier development, negotiation, key terms management, and contract management within Saudi Arabia.</li> <li >Strong awareness of cost control principles and delivery efficiency.</li> </ul> <h3 >Location</h3> <p >This position is based in the 3rd Industrial City, Jeddah, Makkah, Saudi Arabia.</p> <h3 >Work Type</h3> <p >This is a full-time employment opportunity.</p> <h3 >Application Process</h3> <p >Interested candidates who meet the specified requirements are encouraged to apply.</p>

MEP Engineer – Facilities Management Advisory Location: King Salman Energy Park (SPARK), Eastern Province, Saudi Arabia Employment Type: Full-time<br>Position Summary King Salman Energy Park (SPARK) is a premier industrial ecosystem supporting the region’s energy and manufacturing sectors. As part of SPARK’s commitment to operational excellence and sustainable infrastructure, the MEP Engineer plays a key role in ensuring the reliability, efficiency, and compliance of mechanical, electrical, and plumbing systems across the park. This position will support the inspection, maintenance, and performance optimization of MEP systems within both building and infrastructure assets, including tenant facilities, substations, pumping stations, utility corridors, and common areas. The MEP Engineer will work closely with senior engineers, FM teams, and service providers to maintain high operational standards and system integrity.<br>Key Responsibilities1. MEP Systems Support (Infrastructure & Building Assets) Monitor the performance and operational status of MEP systems including HVAC, water supply, drainage, fire protection, lighting, power distribution, and pumping stations. Conduct site inspections and support maintenance activities for MEP systems across both infrastructure and building facilities. Participate in the troubleshooting, fault analysis, and resolution of MEP-related technical issues. Support the review of method statements, risk assessments, and maintenance procedures submitted by contractors. Ensure building MEP systems are maintained according to required specifications, tenant guidelines, and health and safety standards. Support the technical review and commissioning of new MEP installations or refurbished systems.2. Preventive & Corrective Maintenance Coordination Assist in implementing preventive and corrective maintenance schedules for MEP systems in coordination with O&M contractors. Conduct field verification of maintenance activities to ensure alignment with SLAs and technical standards. Maintain records of completed works, service reports, and contractor performance. Monitor spare parts usage and support timely identification of required materials. Coordinate with FM teams to minimize downtime and ensure timely resolution of urgent issues.3. Utilities Performance Monitoring Assist in tracking consumption data for utilities such as electricity, water, and chilled water across MEP systems. Identify abnormal usage trends and report potential inefficiencies or faults. Support the implementation of energy efficiency measures and corrective actions. Work with sustainability teams to improve performance through data-driven insights and technical adjustments.4. Compliance & Safety Ensure all MEP activities are performed in compliance with local regulations, SPARK standards, and international codes (e.g., SBC, ASHRAE, NFPA, NEC, IEC). Participate in safety inspections and enforce compliance with HSE protocols during site activities. Assist with documentation and audits related to safety and regulatory compliance.5. Contractor & Vendor Coordination Liaise with external contractors and vendors to support ongoing MEP maintenance works and service delivery. Monitor contractor performance and ensure compliance with contractual obligations, timelines, and quality expectations. Provide site-level coordination during minor works, equipment replacements, and system upgrades.6. Technical Documentation & Reporting Maintain up-to-date MEP documentation, including drawings, asset registers, test reports, and maintenance logs. Assist in preparing technical reports, condition assessments, and recommendations for system improvements. Support the integration of MEP asset data into CAFM/CMMS platforms for centralized monitoring and tracking.<br>Qualifications & Experience Bachelor’s degree in Mechanical or Electrical Engineering (or related field).4–7 years of experience in MEP operations, maintenance, or technical support—preferably in industrial parks, large-scale developments, or infrastructure projects. Strong knowledge of MEP systems for both buildings and infrastructure (e.g., utility corridors, substations, pump stations). Familiarity with international and local codes and standards (SBC, ASHRAE, NFPA, NEC, IEC). Experience using CAFM/CMMS platforms for asset and work order management is preferred. Previous experience in the GCC region is an advantage.<br>Key Skills & Attributes Technical Proficiency: Solid understanding of MEP systems, their operation, and typical fault conditions. Problem Solving: Able to respond to system failures and maintenance issues quickly and efficiently. Attention to Detail: Strong focus on system compliance, documentation accuracy, and service quality. Teamwork: Able to collaborate with internal teams, contractors, and stakeholders to support joint goals. Communication: Clear reporting and coordination with field teams, vendors, and engineering supervisors. Safety Awareness: Strong commitment to HSE and regulatory compliance during operations and inspections.<br>Reporting Line Reports To:Senior MEP Engineer<br>Collaborates With Internal Stakeholders:Facilities Management Utilities and Sustainability Teams Engineering and Projects HSE and Compliance Procurement and Vendor Management External Stakeholders:O&M contractors and service providers Engineering consultants Utility suppliers Regulatory bodies (for inspections and compliance matters)<br>All interested applicants can also email their CVs to careers.escl@dhowsolutions.com with a subject line of “MEP Engineer-Saudi National” mentioning their availability.

We're Hiring – Retail MEP Professionals | Saudi Arabia <br> Join PD Design & Retail Consultancy <br>PD Design & Retail Consultancy is expanding its Retail Design & Delivery (RDD) team for several prestigious shopping mall developments across the Kingdom of Saudi Arabia. We are seeking experienced and highly motivated Mechanical , Electrical , and Electromechanical Engineers with proven experience in shopping malls , retail fit-out , tenant coordination , and landlord-side retail delivery .<br> Current Vacancies * Retail MEP Executive (2–3 Years)* Retail MEP Associate (4–8 Years)* Retail MEP Manager (8–15 Years)<br>Must be willing to relocate to Riyadh, Saudi Arabia. Must be able to join PD in 30 days and send copy of SCE membership along with application.<br>What We're Looking For <br>We are interested in professionals with experience in one or more of the following:* Shopping malls and retail developments* Retail & F&B fit-out projects* Mixed-use and commercial developments* Entertainment and lifestyle destinations* Airport retail developments* Luxury retail projects<br>Candidates should have practical experience in:* Retail Design & Delivery (RDD)* Tenant coordination* Landlord design review* Technical design review* MEP coordination* Utility and capacity verification* Shop drawing and material submission review* Site inspections and construction monitoring* Testing & Commissioning* Snagging and final handover* Store opening and operational readiness<br>Preferred Industry Background Experience with developers, landlords, consultants or contractors involved in major retail developments.<br>Preferred Technical Skills Candidates should demonstrate knowledge of:* HVAC Systems* Electrical Distribution* Fire Alarm & Fire Fighting* Plumbing & Drainage* Public Health Engineering* Kitchen Exhaust & Smoke Extraction* MEP Load Calculations* Testing & Commissioning* Saudi Building Code* NFPA, ASHRAE and IEC Standards* Software knowledge in Auto CAD, Revit, Navisworks, MS Project, Primavera P6, or similar platforms will be an advantage<br>Qualifications * Bachelor's Degree in Mechanical, Electrical or Electromechanical Engineering.* Saudi Council of Engineers Registration (preferred).* KSA or GCC experience is highly desirable.* Transferable Iqama is an advantage.* Immediate or short-notice availability is preferred.<br>Your CV Must Clearly Include <br>To be considered, please ensure your CV specifies:* Engineering discipline (Mechanical, Electrical or Electromechanical)* Total years of experience* Shopping mall and retail projects completed* Landlord, consultant, contractor or tenant-side experience* Number of retail units or tenant packages managed* MEP disciplines handled* Current location and nationality* Saudi Council of Engineers registration status* Iqama transfer status* Notice period* Current and expected salary<br> Only candidates with relevant shopping mall, retail fit-out, or tenant delivery experience will be shortlisted. <br> How to Apply Please email your updated CV to:<br> hr@pd-design.me <br>Subject Line:<br>* Application – Retail MEP Executive – KSA<br>* Application – Retail MEP Associate – KSA<br>* Application – Retail MEPManager – KSA<br>( Please indicate the position you are applying for in the email subject. ) Must be able to join PD in 30 days and send copy of SCE membership along with application.<br>Join us in delivering some of Saudi Arabia's most exciting retail destinations.

About Us<br>Since 1974, S. K. M Air Conditioning LLC has been a leading manufacturer of HVAC equipment across the Middle East and beyond. With 2,000+ employees representing 30+ nationalities, we deliver innovative, reliable, and energy-efficient solutions across 30+ global markets.<br>Role Overview<br>We are looking for a Sales Service Engineer – HVAC (After Sales) to join our After Sales team. This role is responsible for troubleshooting, warranty handling, and customer support, ensuring SKM systems consistently perform at the highest standards.<br>Key Responsibilities<br>???? Handle warranty and service complaints, ensuring resolution within set KPIs.???? Troubleshoot HVAC equipment (chillers, AHUs, DX systems, package units).???? Conduct root cause analysis of failures and prepare service reports.???? Support retrofit, repair, and maintenance activities.???? Supervise technicians on-site, ensuring safety and quality compliance.???? Provide technical feedback to engineering and quality teams.???? Assist in customer training and prepare technical documentation.<br>What We’re Looking For<br>✅ Bachelor’s degree in Mechanical Engineering (or 5–7 years HVAC service experience).✅ 5+ years’ experience in installation, operation, maintenance, and service of HVAC systems.✅ GCC experience preferred (HVAC service, MEP, or FM).✅ Strong troubleshooting, technical, and customer service skills.✅ Good communication skills in English (Arabic/Hindi/Urdu is an advantage).✅ Knowledge of mechanical/electrical controls (analog & microprocessor-based).<br>Why Join SKM?<br>???? Be part of one of the region’s leading HVAC manufacturers.???? Collaborative and multicultural work environment.???? Opportunities to grow your career and expand your technical expertise.???? Drive meaningful work in after sales service and customer satisfaction.<br>???? Apply Now to be part of SKM and make a difference in HVAC after sales excellence!

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Job description</p><p><br></p><p><b>Job Qualifications – Sales &amp; Marketing Engineer</b></p><p><b></b></p><p><b>Education</b></p><ul><li>Bachelor’s degree in <b>Mechanical Engineering</b>, <b>Electrical Engineering</b>, or a related technical field, or BBA, MBA.</li><li>Additional training or certification in <b>rotating equipment</b> or <b>maintenance engineering</b> is a plus.</li></ul><p><b>Technical Knowledge &amp; Experience</b></p><ul><li>Minimum <b>4–5 years of experience</b> in <b>sales, marketing, or technical support</b> related to <b>rotating equipment services and maintenance</b>.</li><li>Strong knowledge of rotating equipment such as:</li><li>Pumps (centrifugal, positive displacement)</li><li>Compressors (reciprocating, centrifugal, screw)</li><li>Turbines</li><li>Gearboxes</li><li>Motors and generators</li><li>Solid understanding of:</li><li>Maintenance services and spare parts manufacturing basics.</li></ul><p><b>Sales &amp; Marketing Skills</b></p><ul><li>Proven ability to <b>identify customer needs</b> and propose <b>technical service solutions</b>.</li><li>Experience in:</li><li>Technical sales presentations</li><li>Preparing <b>commercial and technical proposals</b></li><li>Cost estimation for services and maintenance contracts</li><li>Strong negotiation, closing, and customer relationship management skills.</li><li>Ability to work with EPCs, OEMs, and end users in industrial sectors (oil &amp; gas, power plants, manufacturing, cement, etc.).</li></ul><p><br></p><p><br></p><p><br></p><p><br></p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p>Skills</p><p><b>Communication &amp; Personal Skills</b></p><ul><li>Excellent <b>communication and presentation skills</b>.</li><li>Ability to translate complex technical issues into clear customer benefits.</li><li>Strong analytical and problem-solving mindset.</li><li>Self-motivated, target-driven, and capable of working independently.</li><li>Willingness to travel to customer sites as required.</li></ul><p><br></p><p>Preferred candidate</p><p><b>Years of experience</b></p><p>4 - 15 years</p><p><b>Gender</b></p><p>Male</p><p><b>Minimum education</b></p><p>Bachelor's degree / higher diploma</p></div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p><b>Job Title: Mechanical Supervisor</b></p><p>Location: Rabigh</p><p>Department: Maintenance</p><p>Reports to: Mechanical Engineer</p><p>Job Summary:</p><p>Works under the direction of Maintenance Engineer to execute &amp; supervise all preventive and corrective maintenance, monthly /annual outage and overhauling work activities on plant mechanical equipments .</p><p>Key Responsibilities:</p><p>Assigns preventive and corrective maintenance jobs as per the direction of Maintenance Engineer.</p><p>Supervises and co-ordinates activities of maintenance staff.</p><p>Maintains records, prepares reports and composes correspondence related to work.</p><p>Executes work order through CMMS (SAP) and co-ordinates with maintenance engineer for job completion and technical matters.</p><p>Maintain such communications and relations as are necessary to report on the status of matters requiring action and to ensure that corrective action is undertaken</p><p>Helps Maintenance Engineer in executing corrective and planned maintenance with due regard to annual scheduled maintenance plan.</p><p>He will maintain logs, records and files for all assigned area equipment s information, history and spare part inventory.</p><p>To prepare purchase requisitions for spare parts and consumables ensuring budgetary constraints and arrange strategic spares availability to cope up with the maintenance requirements.</p><p>Acquires considerable knowledge of the process and the relevant systems throughout the plant and applies the same to trouble shoot problems and leads the maintenance team in resolving the issues.</p><p>Supervise, direct and co-ordinate the activities of all personnel assigned to his area.</p><p>Identify the competency gap for their subordinate personnel and implement necessary actions.</p><p>Carry out annual performance evaluation of reporting employees</p><p>Provide on-the-job training to new employees and evaluate their OJT Performance</p><p>Identification and control of hazards in assigned work area</p><p>Ensure aspects identified are monitored and operational controls are followed</p><p>Report deviations in Integrated Management System</p><p>Reporting of emergencies and incidents and near misses</p><p>Effective resource utilisation</p><p>Perform other duties as assigned</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><h2>Qualifications &amp; Experience:</h2><p>Bachelor degree in Mechanical</p><p>4 years related experience and training or equivalent combination of education and experience.</p><h2>Skills:</h2><p>Awareness of Quality, Occupational Health &amp; Safety and Environment Management system principles</p><p>Knowledge of applicable legal requirements</p><p>Hazard Risk assessment</p><p>Aspect Impact assessment</p><p>Knowledge of identification, classification and disposal of waste</p><p>Knowledge of Emission Monitoring</p><p>Be able to lead the maintenance group.</p><p>Excellent communication skills in English Language</p><p>Computer literate.</p><p>Be able to use SAP as end user.</p><p></p></section>

<p>We Are Hiring Lifting Inspection Engineer / Inspector</p><p>Company: CIB Mars Quality &amp; Standardization Certificates Issuing Services</p><p>Location: UAE / KSA / Pakistan (as per project requirements)</p><p>Industry: Third Party Inspection &amp; Certification</p><p>CIB MARS is seeking a qualified Lifting Inspection Engineer / Inspector to join our Inspection Operations team. The selected candidate will perform third-party inspections, testing, and technical assessments of lifting equipment and accessories while ensuring compliance with international standards and safety regulations.</p><p>Key Responsibilites</p><ul><li>Conduct inspections of lifting equipment and lifting accessories (cranes, hoists, forklifts, MEWPs, slings, shackles, lifting beams, etc.).</li><li>Perform visual inspections, functional testing, and load testing where applicable.</li><li>Identify and document defects, non-conformities, and safety-critical findings.</li><li>Prepare accurate inspection reports and technical documentation in accordance with applicable standards.</li><li>Ensure compliance with ISO/IEC 17020 inspection requirements and safety regulations.</li><li>Maintain proper use and control of inspection instruments and calibrated equipment.</li><li>Deliver technical guidance and operational training to operators and site personnel where required.</li><li>Maintain professional communication with clients and internal technical teams.</li></ul><p><strong>Desired Candidate Profile</strong></p><h2>Qualifications &amp; Experience</h2><ul><li>Bachelor s Degree or Diploma in Mechanical / Civil / Electrical Engineering</li><li>2 6 years experience in lifting equipment inspection, QA/QC, maintenance, or related industrial inspection roles</li><li>Knowledge of lifting standards and safety regulations</li><li>Experience in third-party inspection or ISO 17020 environment is an advantage</li><li>Certifications such as LEEA, ASNT, CSWIP, IPAF, or OEM training will be considered beneficial</li></ul><h2>Skills Required</h2><ul><li>Strong technical inspection knowledge</li><li>Ability to prepare clear inspection reports and documentation</li><li>Good understanding of HSE practices and industrial site safety</li><li>Professional communication and client interaction skills</li><li>High level of integrity, impartiality, and attention to detail</li></ul>

<h3 >Field Engineering Piping/Mechanical at Bechtel</h3> <p >Bechtel Corporation, a global leader in engineering, construction, and project management since 1898, is seeking a dedicated <strong >Field Engineering Piping/Mechanical</strong> professional. This full-time role is based in Saudi Arabia and requires 5-10 years of relevant experience. The position involves critical construction engineering tasks within the mechanical and piping disciplines, ensuring project delivery aligns with design and quality standards.</p> <h3 >The Ar Rjum Project Overview</h3> <p >This role supports the Ar Rjum Project, a greenfield gold project located approximately 200 km north-east of Taif towards Riyadh and about 26 km South of Al Mouwayh, within the Central Arabian Gold Region. The project encompasses three open pit mining operations, a processing plant, tailings management facilities, and extensive supporting infrastructure, including water and power supply, maintenance facilities, offices, and accommodation villages.</p> <h3 >Core Responsibilities</h3> <ul > <li >Coordinate with engineering teams on constructability and design issues related to commodity installations and work sequencing.</li> <li >Establish effective piping design/field engineering working relationships and communication channels with the Project Engineer.</li> <li >Specify piping criteria for the construction of temporary facilities as required.</li> <li >Provide field engineering support to superintendents and personnel to meet cost and time schedules, verify materials, equipment, and quality, and ensure design compliance.</li> <li >Develop work plans, coordinate material take-offs and requisitions, perform and document inspections, report progress, and resolve design and construction conflicts for mechanical commodities.</li> <li >Ensure procedural compliance, material control, and comprehensive documentation of inspections for completed work.</li> <li >Direct or perform the preparation of quantity listings for field-purchased material and equipment, and initiate requisitions.</li> <li >Support the preparation of construction drawings and schedules, design of temporary construction facilities, and ensure the preparation of as-built drawings.</li> <li >Support the planning and delivery of construction materials and equipment, ensuring proper warehousing and environmental protection.</li> <li >Review specifications, purchase orders, subcontracts, inspection reports, and technical data to provide site assistance and advice.</li> <li >Interpret design and vendor drawings and specifications.</li> </ul> <h3 >Candidate Profile and Requirements</h3> <ul > <li >A minimum of 5-10 years of experience in a relevant field.</li> <li >Physical ability to conduct field inspections and project walk-downs, including extensive walking, climbing ladders and scaffolding, using fall protection, and maneuvering in confined spaces.</li> <li >Excellent interpersonal skills, a collaborative team-player approach, and a commitment to knowledge sharing.</li> <li >Ability to solve problems creatively, understand client needs, and provide technical compliance and training.</li> <li >Capability to work effectively within multi-disciplinary, multi-cultural teams and manage diverse relationships.</li> <li >Self-driven with the ability to plan and execute work independently without direct supervision.</li> </ul> <h3 >Essential Knowledge and Technical Skills</h3> <ul > <li >Thorough knowledge of all phases of engineering, design, construction, and field activities.</li> <li >Proficiency in Microsoft Office and Adobe Design Suite software programs.</li> <li >Experience with 3D and 4D modeling software.</li> <li >Knowledge and application of the Zero Accident Safety Philosophy.</li> <li >Broad knowledge of Construction Standard Work Process Procedures.</li> <li >Thorough knowledge of current industry standards.</li> <li >Broad knowledge of the Project Environmental, Safety &amp; Health (ES&amp;H) handbook, the Supervisors ES&amp;H Manual, the Project Safety Management Plan, and Bechtel Core Processes relevant to the area of responsibility.</li> <li >Knowledge of company and project quality policies.</li> </ul> <h3 >Work Environment</h3> <p >This role is based at the Ar Rjum Project site in Saudi Arabia, requiring a commitment to working in a dynamic construction environment. The position demands strong organizational skills, attention to detail for inspections, and the ability to produce accurate and concise documentation. Join Bechtel in contributing to significant infrastructure development projects globally.</p>

<p>We are looking for an experienced Construction Mechanical Engineer to oversee and coordinate mechanical construction activities for Oil &amp; Gas, Petrochemical, and Refinery projects in Saudi Arabia. The candidate will be responsible for ensuring that mechanical construction activities are executed safely, efficiently, and in accordance with approved drawings, specifications, project schedules, quality standards, and client requirements.</p><p>Key Responsibilities</p><ul><li>Supervise and coordinate mechanical construction and installation activities at project sites.</li><li>Ensure execution of mechanical works as per approved drawings, specifications, method statements, and project schedules .</li><li>Coordinate with Construction Managers, Planning, Engineering, QA/QC, HSE, Procurement, and subcontractor teams.</li><li>Monitor daily construction progress and ensure activities are completed within the planned schedule.</li><li>Supervise mechanical installation activities including equipment installation, piping, valves, pumps, compressors, tanks, and related mechanical systems .</li><li>Review engineering drawings, specifications, material requirements, and construction documents.</li><li>Coordinate with subcontractors and ensure proper allocation of manpower, equipment, and materials.</li><li>Monitor site activities and resolve technical and construction-related issues in coordination with engineering teams.</li><li>Ensure all mechanical works comply with approved quality standards, specifications, and client requirements .</li><li>Coordinate with QA/QC teams for inspections, testing, and completion of mechanical works.</li><li>Ensure strict compliance with HSE requirements, permit-to-work procedures, and site safety standards .</li><li>Participate in site meetings, progress meetings, and coordination meetings with clients and contractors.</li><li>Prepare and submit daily, weekly, and monthly construction progress reports .</li><li>Identify potential delays and coordinate with the planning team for corrective and recovery actions.</li><li>Support pre-commissioning, commissioning, shutdown, turnaround, and maintenance activities , where applicable.</li><li>Ensure proper documentation, punch-list clearance, as-built information, and project handover activities.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Minimum 8 years of relevant experience in Mechanical Construction.</li><li>Strong experience in Oil &amp; Gas / Petrochemical / Refinery projects .</li><li>Relevant Mechanical Engineering qualification .</li><li>Strong hands-on experience in mechanical construction and site execution .</li><li>Shutdown &amp; Turnaround experience is highly preferred.</li><li>Experience in equipment installation, piping, mechanical systems, and associated construction activities.</li><li>Candidates with Saudi Arabia / GCC experience will be preferred.</li><li>Good knowledge of construction procedures, specifications, drawings, and safety requirements.</li><li>Strong coordination, supervision, and problem-solving skills.</li><li>Good English communication and reporting skills .</li></ul>

<p>In a world of possibilities, pursue one with endless opportunities. Imagine Next! At Parsons, you can imagine a career where you thrive, work with exceptional people, and be yourself. Guided by our leadership vision of valuing people, embracing agility, and fostering growth, we cultivate an innovative culture that empowers you to achieve your full potential. Unleash your talent and redefine what s possible.</p><p>Parsons is looking for an amazingly talented District Cooling Plant Engineer (Saudi National) to join our Team! The District Cooling Plant Specialist will provide technical and site support for district cooling plant activities across the Airport / Infrastructure project. The role will assist with the installation, inspection, testing, commissioning, and operation-readiness of district cooling plant systems, ensuring compliance with approved designs, specifications, project requirements, and applicable standards.</p><p>What You'll Be Doing:</p><ul><li>Support technical and construction activities related to district cooling plant systems.</li><li>Review approved drawings, specifications, equipment schedules, and technical documentation.</li><li>Assist in monitoring installation activities for district cooling plant equipment and systems.</li><li>Coordinate with Contractors and site teams to ensure works follow approved designs and Method Statements.</li><li>Support inspection and verification of mechanical equipment and associated systems.</li><li>Assist with reviewing equipment submittals, material approvals, and technical documents.</li><li>Support preparation and review of RFIs, Technical Queries, and site technical clarifications.</li><li>Assist with monitoring construction progress and identifying technical constraints.</li><li>Participate in technical coordination and progress meetings.</li><li>Coordinate with QA/QC teams during inspections and testing.</li><li>Support testing and commissioning activities.</li><li>Maintain technical records, inspection reports, equipment documentation, and commissioning records.</li><li>Support identification and resolution of technical issues during installation and commissioning.</li><li>Assist with preparation of punch lists and follow-up of outstanding works.</li><li>Support final testing, commissioning, and handover activities.</li></ul><p>District Cooling Plant Systems</p><p>The role will support activities related to systems including, as applicable:</p><ul><li>Chillers</li><li>Chilled Water Pumps</li><li>Condenser Water Pumps</li><li>Cooling Towers</li><li>Heat Exchangers</li><li>Chilled Water Distribution Systems</li><li>Condenser Water Systems</li><li>Primary / Secondary Pumping Systems</li><li>Expansion Tanks</li><li>Pressurization Systems</li><li>Water Treatment Systems</li><li>Chemical Dosing Systems</li><li>Filtration Systems</li><li>Mechanical Pipework</li><li>Valves &amp; Control Valves</li><li>Flow Meters</li><li>Temperature &amp; Pressure Instrumentation</li><li>HVAC / Mechanical Plant Systems</li><li>BMS / SCADA Interfaces</li></ul><p>Installation &amp; Construction Support</p><ul><li>Assist in monitoring installation of chillers, pumps, cooling towers, heat exchangers, and associated equipment.</li><li>Verify equipment installation against approved drawings and manufacturer requirements.</li><li>Assist with checking equipment alignment, supports, foundations, vibration isolation, and connections.</li><li>Monitor installation of chilled water and condenser water pipework.</li><li>Verify pipe routing, supports, valves, strainers, flexible connections, and accessories.</li><li>Assist with monitoring insulation and equipment protection.</li><li>Support installation inspections and identify potential installation issues.</li><li>Coordinate with Civil, Structural, Electrical, Instrumentation, and BMS teams on interfaces.</li><li>Assist with equipment delivery, storage, handling, and preservation requirements.</li></ul><p>Testing &amp; Commissioning Support</p><ul><li>Assist in preparation and implementation of testing and commissioning activities.</li><li>Support pressure testing and flushing of chilled water and condenser water systems.</li><li>Assist with equipment pre-commissioning inspections.</li><li>Support pump testing and performance verification.</li><li>Assist with chiller and cooling tower commissioning activities.</li><li>Support functional testing of valves, instruments, and control systems.</li><li>Assist with BMS / SCADA interface testing.</li><li>Record test results and identify deviations from approved requirements.</li><li>Support commissioning teams in resolving technical issues.</li><li>Assist with completion of commissioning checklists and documentation.</li></ul><p>Quality &amp; HSE Support</p><ul><li>Compliance with approved Method Statements, ITPs, drawings, and specifications.</li><li>Participate in inspections with QA/QC teams.</li><li>Assist with review of WIRs, MIRs, test reports, and equipment certificates.</li><li>Identify defects and non-conforming works and report them to the relevant team.</li><li>Support NCR resolution and corrective actions.</li><li>Follow project HSE requirements and safe working practices.</li><li>Ensure safe practices during equipment installation, lifting, pressure testing, and commissioning.</li><li>Participate in toolbox talks, site inspections, and HSE activities.</li></ul><p>Airport / Infrastructure Responsibilities</p><ul><li>Support district cooling plant activities serving airport terminals, support buildings, and associated infrastructure.</li><li>Coordinate works within operational and restricted airport environments.</li><li>Support interfaces between district cooling plants, chilled water networks, buildings, and other infrastructure.</li><li>Assist with phased construction and commissioning activities.</li><li>Ensure technical activities comply with project-specific airport requirements and operational constraints.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor's Degree in Mechanical Engineering, Building Services Engineering , or a related discipline.</li><li>Minimum 2 years of relevant experience in HVAC, district cooling, mechanical systems, or MEP construction.</li><li>Basic understanding of district cooling plant systems and chilled water infrastructure.</li><li>Familiarity with chillers, pumps, cooling towers, heat exchangers, valves, and chilled water networks.</li><li>Basic understanding of testing and commissioning procedures.</li><li>Experience working on major building, infrastructure, MEP, or district cooling projects is preferred.</li><li>Good understanding of engineering drawings, specifications, Method Statements, and ITPs.</li><li>Familiarity with QA/QC and HSE requirements.</li><li>Good communication and coordination skills.</li><li>Ability to work effectively with Contractors, Consultants, and multidisciplinary project teams.</li></ul>

Qamat construction is a Saudi construction company delivering integrated construction solutions across structural, architectural, and electromechanical works, with a strong focus on quality, professional execution, and delivering projects to the highest standards.<br>As we continue to grow, we are looking for an experienced Senior Mechanical Engineer to join our team in Riyadh. Key Requirements Bachelor's degree in Mechanical Engineering.6+ years of professional experience in the construction industry. Strong experience in preparing, reviewing, and developing Mechanical Shop Drawings. Advanced proficiency in Revit MEP, BIM, and Auto CAD. Strong knowledge of HVAC, Plumbing, and Firefighting systems. Experience in multidisciplinary coordination and construction documentation. Strong communication, coordination, and problem-solving skills.<br>???? Location: Riyadh, Saudi Arabia If you are an experienced mechanical professional looking for your next career opportunity and ready to contribute to high-quality construction projects, we would like to hear from you.<br><br>#Hiring #Senior Mechanical Engineer #Mechanical Engineer #MEP #Revit MEP #BIM #Auto CAD #HVAC #Shop Drawings #Construction #Saudi Jobs #Riyadh Jobs

<h3 >About Vanderlande and the Role</h3> <p >Vanderlande is a leading global provider of innovative and high-performance solutions for airport logistics. Our comprehensive portfolio includes products and solutions for baggage and cargo handling, advanced software for the digitalization of logistics processes, and an extensive range of maintenance and services. We serve renowned airports and airlines worldwide. We are currently seeking a <strong >Site Engineer Steel Structure</strong> to join our Project Execution team in Jeddah, Makkah, Saudi Arabia.</p> <h3 >Position Summary</h3> <p >The Site Engineer Steel Structure will provide essential support to the Site Manager regarding mechanical installation, commissioning, and maintenance of equipment across various projects in the region. This full-time role involves guiding sub-contractors, coordinating with internal departments, and supervising steel works to ensure project execution aligns with approved standards and practices within the industrial automation domain.</p> <h3 >Key Responsibilities</h3> <ul > <li >Support the Site Manager in mechanical installation, commissioning, and maintenance activities for project equipment.</li> <li >Guide and educate sub-contractors on installation best practices.</li> <li >Coordinate with the construction and procurement departments to identify required tools and consumables for site execution.</li> <li >Support and supervise the installation of steel works for projects.</li> <li >Prepare work packages for site installation teams.</li> <li >Support the proposals department with input for upcoming projects and share previously learned lessons.</li> <li >Monitor and report on site progress.</li> <li >Assist the quality team with inspections, closing out snag points, and facilitating eventual handover to the client.</li> <li >Identify potential risks for failures and implement preventive actions with the Engineering and Drafting teams to prevent defects in engineering deliverables.</li> <li >Implement and monitor all mechanical-related works at the site as per approved drawings and methods.</li> <li >Ensure adherence to occupational health, safety, security, environment, and quality practices.</li> </ul> <h3 >Required Qualifications and Experience</h3> <ul > <li >Bachelor’s degree in Mechanical Engineering.</li> <li >Minimum of <strong >5 years</strong> of professional experience in steel structure practices within the Industrial automation domain.</li> <li >Specific experience in Baggage Handling or Material Handling Systems is required.</li> </ul> <h3 >Essential Skills and Attributes</h3> <ul > <li >Strong knowledge of engineering analysis tools, mechanical design, and installation practices.</li> <li >Effective interpersonal skills, with the ability to engage internal and external stakeholders.</li> <li >Demonstrated ability to work effectively within multiple cultural teams.</li> </ul> <h3 >Work Environment and Location</h3> <p >This is a full-time position based in Jeddah, Makkah, Saudi Arabia. The role requires a willingness to work on projects across various locations within KSA as needed. Salary for this position will be discussed during the interview process.</p>

<h3 >About Vanderlande and the Role</h3> <p >Vanderlande is a leading global provider of innovative and high-performance solutions for airport logistics. Our comprehensive portfolio includes products and solutions for baggage and cargo handling, advanced software for the digitalization of logistics processes, and an extensive range of maintenance and services. We serve renowned airports and airlines worldwide. We are currently seeking a <strong >Site Engineer Steel Structure</strong> to join our Project Execution team in Jeddah, Makkah, Saudi Arabia.</p> <h3 >Position Summary</h3> <p >The Site Engineer Steel Structure will provide essential support to the Site Manager regarding mechanical installation, commissioning, and maintenance of equipment across various projects in the region. This full-time role involves guiding sub-contractors, coordinating with internal departments, and supervising steel works to ensure project execution aligns with approved standards and practices within the industrial automation domain.</p> <h3 >Key Responsibilities</h3> <ul > <li >Support the Site Manager in mechanical installation, commissioning, and maintenance activities for project equipment.</li> <li >Guide and educate sub-contractors on installation best practices.</li> <li >Coordinate with the construction and procurement departments to identify required tools and consumables for site execution.</li> <li >Support and supervise the installation of steel works for projects.</li> <li >Prepare work packages for site installation teams.</li> <li >Support the proposals department with input for upcoming projects and share previously learned lessons.</li> <li >Monitor and report on site progress.</li> <li >Assist the quality team with inspections, closing out snag points, and facilitating eventual handover to the client.</li> <li >Identify potential risks for failures and implement preventive actions with the Engineering and Drafting teams to prevent defects in engineering deliverables.</li> <li >Implement and monitor all mechanical-related works at the site as per approved drawings and methods.</li> <li >Ensure adherence to occupational health, safety, security, environment, and quality practices.</li> </ul> <h3 >Required Qualifications and Experience</h3> <ul > <li >Bachelor’s degree in Mechanical Engineering.</li> <li >Minimum of <strong >5 years</strong> of professional experience in steel structure practices within the Industrial automation domain.</li> <li >Specific experience in Baggage Handling or Material Handling Systems is required.</li> </ul> <h3 >Essential Skills and Attributes</h3> <ul > <li >Strong knowledge of engineering analysis tools, mechanical design, and installation practices.</li> <li >Effective interpersonal skills, with the ability to engage internal and external stakeholders.</li> <li >Demonstrated ability to work effectively within multiple cultural teams.</li> </ul> <h3 >Work Environment and Location</h3> <p >This is a full-time position based in Jeddah, Makkah, Saudi Arabia. The role requires a willingness to work on projects across various locations within KSA as needed. Salary for this position will be discussed during the interview process.</p>

<p>A major oil and gas service company in Saudi Arabia is seeking experienced Wireline Field Engineers / Remote Engineers to support WLES (Open Hole) operations. We are looking for experienced wireline professionals with a strong technical background who can support either field-based operations or remote technical support , depending on experience and suitability.</p><p><strong>Duties &amp; Responsibilities</strong></p><ul><li>Support and execute WLES / Open Hole wireline operations .</li><li>Prepare, test and operate wireline equipment and downhole tools.</li><li>Provide technical support and troubleshooting during operations.</li><li>Monitor job performance and assist with resolving operational or equipment issues.</li><li>Review operational data and provide technical guidance where required.</li><li>Ensure all operations are carried out safely and in accordance with company procedures and HSE requirements.</li><li>Complete job reports, operational documentation and equipment records.</li><li>Liaise with field teams, technical personnel and clients as required.</li></ul><p><strong>Qualifications</strong></p><ul><li>Previous experience as a Wireline Field Engineer, Wireline Engineer or Wireline Remote Engineer within the oil and gas industry.</li><li>Strong WLES / Open Hole experience is essential.</li><li>Good knowledge of Open Hole wireline logging operations, downhole tools and surface equipment .</li><li>Strong mechanical/electrical troubleshooting and technical problem-solving skills.</li><li>Experience supporting or supervising wireline operations in a field environment.</li><li>For Remote Engineer positions, previous experience providing remote technical/operational support is highly desirable.</li><li>Good communication and reporting skills.</li><li>Previous experience with a major oilfield service company is advantageous.</li><li>Ability to work on a 12 weeks on / 4 weeks off rotation .</li></ul><p><br></p><p><strong>Desired Candidate Profile</strong></p><p>Previous experience as a Wireline Field Engineer, Wireline Engineer or Wireline Remote Engineer within the oil and gas industry. Strong WLES / Open Hole experience is essential. Good knowledge of Open Hole wireline logging operations, downhole tools and surface equipment . Strong mechanical/electrical troubleshooting and technical problem-solving skills. Experience supporting or supervising wireline operations in a field environment. For Remote Engineer positions, previous experience providing remote technical/operational support is highly desirable. Good communication and reporting skills. Previous experience with a major oilfield service company is advantageous. Ability to work on a 12 weeks on / 4 weeks off rotation .</p>

<h3 >About the Role</h3> <p >Al Tuwairqi Group is seeking an <strong >Assistant Technician, Mechanical Maintenance</strong> to join our team in Dammam. This full-time position is integral to supporting the mechanical management objectives for equipment upkeep and operational efficiency within our facilities.</p> <h3 >Role Purpose</h3> <p >The primary purpose of this role is to contribute to achieving the mechanical management's goals for equipment maintenance and ensuring operational wellness. The Assistant Technician will play a key part in enhancing plant productivity by adhering strictly to safety instructions and applying mechanical expertise in a rolling mill environment.</p> <h3 >Key Responsibilities</h3> <ul > <li >Apply mechanical knowledge and troubleshooting practices specifically within the rolling mill operations.</li> <li >Collaborate effectively with senior mechanical technicians on the implementation of general maintenance work orders.</li> <li >Comprehend planned results to ensure timely completion and quality implementation of maintenance work.</li> <li >Report relevant activities and provide status updates on all assigned maintenance tasks.</li> <li >Perform various mill maintenance fittings work as required.</li> </ul> <h3 >Safety and Workplace Compliance</h3> <ul > <li >Ensure safety aspects are maintained within the workplace, covering tools, facilities, and personnel.</li> <li >Understand and strictly follow all organizational Health, Safety, and Environment (HS&amp;E) policies.</li> <li >Maintain familiarity with all safety instructions pertinent to job responsibilities.</li> <li >Keep provided Personal Protective Equipment (PPEs) in good, workable conditions.</li> <li >Report any accidents, near misses, or hazardous conditions promptly to the concerned responsible parties.</li> </ul> <h3 >Qualifications and Experience</h3> <p >Candidates for this role should possess <strong >0-1 years of relevant experience</strong> in mechanical maintenance or a related field. A foundational understanding of mechanical principles and safety protocols is essential.</p> <h3 >Location and Employment Type</h3> <p >This is a full-time position based in <strong >Dammam</strong>, Saudi Arabia, with Al Tuwairqi Group. We invite qualified individuals to apply.</p>