وظائف مشغل ماكينة - الجبيل السعودية

<h3><strong>Role Overview</strong></h3><p>Nama Chemicals Co. is seeking a skilled <strong>Technician, Millwright</strong> for a contract position based in Al Jubail. This role is critical for performing daily maintenance activities to ensure the safe and efficient operation of the plant without interruption. The successful candidate will be responsible for the installation, maintenance, repair, and documentation of various rotary and static equipment.</p><h3><strong>Key Responsibilities</strong></h3><ul><li>Perform daily maintenance activities according to Standard Maintenance Procedures, ensuring high quality and reasonable completion times.</li><li>Properly fill and record maintenance checklists, maintaining proper housekeeping after activity completion.</li><li>Provide feedback to the supervisor on any findings or abnormalities during job performance.</li><li>Respond to operation and maintenance activities, including both normal and emergency cases.</li><li>Execute preventive maintenance across all types of rotary equipment, including pumps, compressors, and gearboxes.</li><li>Execute shutdown maintenance in static equipment, encompassing column cleaning, column tray inspection, and installation of trays.</li><li>Operate, maintain, and repair basic machine tools such as grinding, drilling, and tapping tools.</li></ul><h3><strong>Equipment Expertise</strong></h3><p>The role requires comprehensive expertise in the maintenance and repair of a diverse range of industrial equipment, including:</p><ul><li>Installation, maintenance, and repair of horizontal and vertical centrifugal pumps, reciprocating pumps, and screw pumps.</li><li>Installation, maintenance, and repair of centrifugal, reciprocating, and screw type compressors, as well as air blowers.</li><li>Performing alignment in rotating equipment and replacing bearings in rotary equipment.</li><li>Installation and repair of mechanical seals in centrifugal pumps and agitators.</li><li>Servicing various types of valves, such as ball valves, gate valves, globe valves, and diaphragm valves, and repacking gland packings.</li><li>Installation, removal, and fabrication of gaskets.</li><li>Performing repair and maintenance of bagging machine equipment.</li></ul><h3><strong>Safety and Compliance</strong></h3><p>Adherence to safety and quality standards is a core aspect of this position. The Technician, Millwright will:</p><ul><li>Comply with Nama Chemicals' policies and safety procedures, contributing to achieving target EHS rates.</li><li>Ensure compliance with quality procedures and NAMA ISO certified standards.</li><li>Learn and practice safety procedures, emergency response protocols, safety suggestions, and good housekeeping practices.</li></ul><h3><strong>Candidate Requirements</strong></h3><p>We are seeking a dedicated professional with a proven track record in industrial maintenance. Essential requirements include:</p><ul><li>Between <strong>8 to 12 years</strong> of experience as a Technician, Millwright or in a closely related maintenance role.</li><li>Demonstrated ability to perform the technical tasks and responsibilities outlined above.</li><li>Willingness to be available for on-call duty if assigned.</li><li>Commitment to attending on-the-job and classroom training sessions, as well as other scheduled training programs.</li></ul><h3><strong>Work Environment</strong></h3><p>This contract role in Al Jubail operates within a dynamic industrial environment where maintaining plant integrity and operational efficiency is paramount. The position requires a proactive and detail-oriented individual capable of working independently and as part of a team to uphold Nama Chemicals' high standards.</p>

<h3 >About KBR and the Role</h3> <p >KBR, Inc. is seeking a <strong >Rotating Equipment Specialist</strong> to join its team in Al Jubail, Eastern region. This full-time position is part of KBR Sustainable Technology Solutions (STS), which delivers comprehensive solutions across the asset lifecycle, including licensed process technologies, advisory services, technical expertise, and design capabilities. The role focuses on performing essential maintenance and installation tasks for rotating equipment.</p> <h3 >Key Responsibilities</h3> <ul > <li >Receive job assignments, work instructions, drawings, and specifications from the Supervisor and execute tasks accordingly.</li> <li >Utilize appropriate tools and equipment for each job, including operating heavy-duty specialized tools from the Central tool room.</li> <li >Operate basic machine tools such as grinders, power saws, drill presses, and threading machines.</li> <li >Perform all installation and maintenance work in strict adherence to SATORP procedures and guidelines.</li> <li >Conduct necessary testing, including hydro and pneumatic tests.</li> <li >Obtain required work permits before commencing any work.</li> <li >Maintain strict compliance with SATORP safety standards at all times.</li> <li >Ensure good housekeeping practices are followed during and after job completion.</li> <li >Complete jobs to meet quality and schedule requirements as per company standards.</li> </ul> <h3 >Required Experience</h3> <p >Candidates for this role should possess <strong >more than 10 years of experience</strong> in a relevant field, demonstrating a strong background in the maintenance and installation of rotating equipment.</p> <h3 >Work Environment and Compliance</h3> <p >The Rotating Equipment Specialist will operate within a structured industrial environment, requiring adherence to established safety protocols and operational procedures. A commitment to maintaining high standards of safety and quality is essential for all tasks performed.</p>

<h3><strong>About KBR Saudi Arabia</strong></h3><p>KBR Saudi Arabia is a company of innovators, thinkers, and creators, dedicated to improving the world responsibly and safely. We foster a diverse workforce and attract top talent globally, where expertise thrives on creativity, resourcefulness, and collaboration. We are seeking a skilled <strong>Static Technician III</strong> to join our team in <strong>Al Jubail</strong> for a full-time position.</p><h3><strong>Role Overview</strong></h3><p>The Static Technician III is responsible for maintaining static equipment and piping systems in optimal condition. This role involves the comprehensive installation, routine maintenance, and necessary repair of various static equipment and process piping systems, ensuring operational integrity and adherence to established standards.</p><h3><strong>Key Responsibilities</strong></h3><ul><li>Receive and execute job assignments, work instructions, drawings, and specifications as provided by the Supervisor.</li><li>Lead and guide a team of Technicians in various tasks.</li><li>Select and utilize the correct tools and equipment for each job, including operating heavy-duty specialized tools from the Central tool room.</li><li>Operate basic machine tools such as grinders, power saws, drill presses, and threading machines.</li><li>Perform all installation and maintenance works strictly according to SATORP procedures and guidelines.</li><li>Conduct necessary testing, including Hydro and Pneumatic tests, as required.</li><li>Ensure high standards of housekeeping are maintained during and after the completion of all jobs.</li><li>Achieve job completion targets for quality and schedule in line with company standards and requirements.</li></ul><h3><strong>Safety and Operational Compliance</strong></h3><ul><li>Obtain all necessary work permits before commencing any work.</li><li>Maintain strict compliance with SATORP safety standards at all times.</li><li>Comply with all Safety, Health, and Environment standards and procedures.</li><li>Report all near misses, unsafe conditions, and acts promptly.</li><li>Attend all scheduled safety and technical training sessions.</li><li>Consult with the Supervisor for resolution of any technical issues encountered during work.</li></ul><h3><strong>Qualifications and Experience</strong></h3><ul><li>A valid certification issued by a recognized third-party certification body or an accredited Saudi institute, confirming the individual’s qualifications and competency to perform the required works.</li><li>Minimum of <strong>4 years</strong> of experience in static equipment maintenance.</li></ul><h3><strong>About KBR</strong></h3><p>KBR is committed to a mission of improving the world responsibly and safely, driven by a global team of diverse and talented individuals. We value creativity, resourcefulness, and collaborative problem-solving in all our operations.</p>

<p>NPD & PRODUCTION ENGINEER – DEFENSE & AUTOMOTIVE WIRING HARNESS</p><p><strong>Department:</strong> Engineering / Manufacturing<br><strong>Function:</strong> NPD, Industrialization & Production Engineering<br><strong>Industry:</strong> Defense & Automotive Wiring Harness<br><strong>Location:</strong> Jubail, Saudi Arabia<br><strong>Experience:</strong> 4–8 Years Preferred</p><p>Job Purpose</p><p>Responsible for the complete <strong>New Product Development (NPD), prototype development, industrialization, and production engineering of Defense and Automotive Wiring Harnesses</strong>, starting from customer drawings/BOM/sample through prototype approval and serial production.</p><p>The engineer shall ensure that products are manufactured according to customer drawings, applicable <strong>IPC/WHMA-A-620, MIL, automotive, IATF, APQP and PPAP requirements</strong>, with strong focus on quality, traceability, productivity, and delivery.</p><p>Key Responsibilities</p><p><strong>1. NPD & Prototype Development</strong></p><ul><li><p>Study customer drawings, electrical schematics, BOMs, specifications and samples.</p></li><li><p>Develop complete wiring harnesses from <strong>drawing, schematic or physical sample/reverse engineering</strong>.</p></li><li><p>Prepare BOM, From-To list, cutting list, wire list, connector tables, splice details and manufacturing drawings.</p></li><li><p>Select correct wires, cables, connectors, contacts, terminals, seals, backshells, sleeves, braids, heat-shrink products and protection materials.</p></li><li><p>Manufacture and validate prototype/First Article harnesses.</p></li><li><p>Coordinate technical clarification and prototype approval with customers.</p></li><li><p>Manage engineering changes, drawing revisions and configuration control.</p></li><li><p>Convert approved prototype designs into serial-production processes.</p></li></ul><p><strong>2. Defense Wiring Harness Engineering</strong></p><ul><li><p>Work with MIL-spec wires, cables, connectors and accessories.</p></li><li><p>Practical knowledge of circular military connectors, particularly <strong>MIL-DTL-38999</strong> and similar connector families.</p></li><li><p>Knowledge of MIL backshells, contacts, sealing plugs, shielding and grounding arrangements.</p></li><li><p>Understand shield termination, EMI/EMC protection, cable braiding and grounding requirements.</p></li><li><p>Define processes for crimping, soldering, splicing, shielding, braiding, heat shrinking and connector assembly.</p></li><li><p>Ensure workmanship compliance with <strong>IPC/WHMA-A-620</strong> requirements.</p></li><li><p>Support First Article Inspection and customer/defense quality inspections.</p></li><li><p>Maintain component and process traceability.</p></li></ul><p><strong>3. Automotive Wiring Harness Engineering</strong></p><ul><li><p>Develop automotive LV wiring harnesses and associated subassemblies.</p></li><li><p>Knowledge of automotive connectors, terminals, seals, clips, grommets, convoluted tubes, tapes and protective sleeves.</p></li><li><p>Support <strong>APQP and PPAP</strong> activities.</p></li><li><p>Prepare/review:</p><ul><li><p>Process Flow Diagram</p></li><li><p>PFMEA</p></li><li><p>Control Plan</p></li><li><p>Work Instructions</p></li><li><p>Inspection Standards</p></li><li><p>MSA</p></li><li><p>Process Capability Studies</p></li></ul></li><li><p>Participate in design and process reviews.</p></li><li><p>Support customer-specific automotive quality requirements.</p></li><li><p>Knowledge of <strong>IATF 16949</strong> requirements preferred.</p></li></ul><p><strong>4. Production Engineering</strong></p><ul><li><p>Establish complete manufacturing processes for new wiring harnesses.</p></li><li><p>Develop production routing and assembly sequences.</p></li><li><p>Design/develop harness boards, fixtures and Poka-Yoke systems.</p></li><li><p>Select cutting, stripping, crimping and assembly tooling.</p></li><li><p>Set machine parameters and process specifications.</p></li><li><p>Conduct time studies and establish standard cycle times.</p></li><li><p>Calculate manpower and production capacity.</p></li><li><p>Balance production lines and workstations.</p></li><li><p>Support production during initial batches and mass production.</p></li><li><p>Improve FPY, productivity and output.</p></li></ul><p><strong>5. Crimping & Special Processes</strong></p><p>Strong practical knowledge required in:</p><ul><li><p>Automatic/semi-automatic wire cutting and stripping</p></li><li><p>Terminal crimping</p></li><li><p>Crimp height measurement</p></li><li><p>Pull-force testing</p></li><li><p>Crimp cross-section analysis</p></li><li><p>Contact insertion/extraction</p></li><li><p>Soldering</p></li><li><p>Ultrasonic wire splicing</p></li><li><p>Heat-shrink processing</p></li><li><p>Shield termination</p></li><li><p>Cable braiding</p></li><li><p>Harness taping and wrapping</p></li><li><p>Connector assembly</p></li><li><p>Potting/sealing where applicable</p></li></ul><p><strong>6. Testing & Validation</strong></p><p>Define and support:</p><ul><li><p>100% continuity testing</p></li><li><p>Open/short circuit testing</p></li><li><p>Insulation Resistance (IR)</p></li><li><p>Hi-Pot/Dielectric testing</p></li><li><p>Resistance and voltage-drop testing</p></li><li><p>Functional testing</p></li><li><p>Connector pin verification</p></li><li><p>Pull-force testing</p></li><li><p>First Article Inspection</p></li></ul><p>Analyze test failures and implement corrective actions.</p><p><strong>7. Quality & Problem Solving</strong></p><ul><li><p>Investigate internal and customer quality issues.</p></li><li><p>Perform Root Cause Analysis using <strong>5-Why, Fishbone, 8D and CAPA</strong> methodologies.</p></li><li><p>Implement corrective and preventive actions.</p></li><li><p>Reduce rejection, rework and customer complaints.</p></li><li><p>Participate in internal, customer and certification audits.</p></li><li><p>Ensure compliance with approved manufacturing processe</p></li></ul><p><strong>Desired Candidate Profile</strong></p><p>Mandatory/Preferred Standards Knowledge</p><p>Candidate should have exposure to:</p><ul><li><p><strong>IPC/WHMA-A-620</strong></p></li><li><p><strong>MIL-DTL-38999</strong></p></li><li><p>MIL-spec wiring and interconnection practices</p></li><li><p><strong>IATF 16949</strong></p></li><li><p><strong>APQP</strong><br></p></li></ul>

<h3 >About KBR Saudi Arabia</h3> <p >KBR Saudi Arabia, through its Sustainable Technology Solutions (STS) division, delivers comprehensive and value-added solutions across the entire asset lifecycle. These offerings include world-class licensed process technologies, specialized advisory services, deep technical domain expertise, energy transition solutions, high-end design capabilities, and smart solutions designed to optimize both planned and operating assets.</p> <h3 >The Opportunity: Static Technician</h3> <p >KBR Saudi Arabia is seeking <strong >Static Technicians</strong> at various levels (I, II, and III) to join its team in Al Jubail. This full-time role involves performing essential installation, maintenance, and testing activities for oil and gas facilities, ensuring operational integrity and adherence to stringent safety and quality standards.</p> <h3 >Key Responsibilities</h3> <ul > <li >Receive job assignments, work instructions, drawings, and specifications from the Supervisor and execute tasks accordingly.</li> <li >Utilize appropriate tools and equipment for each job, including operating heavy-duty specialized tools sourced from the Central tool room.</li> <li >Operate basic machine tools such as grinders, power saws, drill presses, and threading machines.</li> <li >Perform all installation and maintenance works in strict compliance with SATORP procedures and guidelines.</li> <li >Conduct necessary testing, including Hydro and Pneumatic tests.</li> <li >Obtain all required work permits prior to commencing any work.</li> <li >Maintain strict adherence to SATORP safety standards at all times.</li> <li >Consult with the Supervisor for resolution of any technical issues encountered.</li> <li >Ensure good housekeeping practices are maintained during and after job completion.</li> <li >Complete jobs to the required quality and schedule, aligning with company standards and requirements.</li> <li >Comply with all Safety, Health, and Environment (SHE) standards and procedures.</li> <li >Report all near misses, unsafe conditions, and unsafe acts promptly.</li> </ul> <h3 >Required Qualifications</h3> <ul > <li >A minimum of <strong >4 to 6 years of experience</strong> in Oil &amp; Gas maintenance.</li> <li >Possession of a Diploma qualification.</li> <li >Strong technical understanding of maintenance management specifically within Oil &amp; Gas Facilities.</li> </ul> <h3 >Work Environment and Expectations</h3> <p >This role operates within the dynamic environment of oil and gas facilities in Al Jubail, requiring a commitment to operational excellence and safety. Technicians are expected to work diligently, adhere to all established procedures, and contribute to a safe and efficient workplace by maintaining high standards of quality and compliance.</p> <h3 >Application Process</h3> <p >Candidates who meet the specified qualifications and are prepared to contribute to KBR Saudi Arabia's operations are encouraged to apply. Further details regarding the application submission will be provided.</p>

<h3 >About KBR, Inc. and the Role</h3> <p >KBR, Inc. is a company driven by innovators and thinkers, united by the goal of improving the world responsibly and safely. We attract a diverse workforce and top global talent, with expertise thriving on creativity, resourcefulness, and collaboration. KBR is seeking a <strong >Static Technician III</strong> to join its team in <strong >Jubail, Eastern, Saudi Arabia</strong>. This is a full-time position critical to maintaining the integrity and functionality of industrial assets.</p> <h3 >Role Overview</h3> <p >The Static Technician III is responsible for ensuring static equipment and piping systems are maintained in optimal condition. This role involves leading a team in the installation, maintenance, and repair of various static equipment and process piping systems, ensuring all operations comply with established procedures and safety standards.</p> <h3 >Key Responsibilities</h3> <ul > <li >Receive and execute work instructions, drawings, and specifications as provided by the Supervisor.</li> <li >Lead and guide a team of Technicians in performing assigned tasks.</li> <li >Utilize appropriate tools and equipment, including operating heavy-duty specialized tools from the Central tool room.</li> <li >Operate basic machine tools such as grinders, power saws, drill presses, and threading machines.</li> <li >Perform all installation and maintenance works in accordance with SATORP procedures and guidelines.</li> <li >Carry out necessary testing, including Hydro and Pneumatic tests.</li> <li >Obtain required work permits before commencing any work.</li> <li >Maintain strict compliance with SATORP safety standards.</li> <li >Consult with the Supervisor for any technical issues or guidance.</li> <li >Ensure good housekeeping practices are maintained during and after job completion.</li> <li >Achieve job completion to specified quality and schedule according to company standards and requirements.</li> <li >Comply with all Safety, Health, and Environment standards and procedures.</li> <li >Report all near misses, unsafe conditions, and acts promptly.</li> <li >Attend scheduled Safety and Technical training sessions.</li> </ul> <h3 >Qualifications and Experience</h3> <ul > <li >Minimum of 4 years of experience in Oil &amp; Gas maintenance for High School graduates.</li> <li >Minimum of 2 years of experience in Oil &amp; Gas maintenance for Diploma holders.</li> <li >Hold a valid certification issued by a recognized third-party certification body or an accredited Saudi institute, attesting to the individual’s qualifications and competency to perform the works.</li> </ul> <h3 >Required Skills and Attributes</h3> <ul > <li >Strong technical understanding of maintenance management in Oil &amp; Gas Facilities.</li> <li >Well-organized and proactive approach to work.</li> <li >Excellent communication skills for effective team leadership and coordination.</li> </ul> <h3 >Commitment to Safety and Operational Excellence</h3> <p >This role demands a strong commitment to operational excellence and adherence to stringent safety protocols. The Static Technician III will operate within a framework that prioritizes safety, environmental protection, and continuous improvement through regular training and proactive reporting of incidents and unsafe conditions.</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p><strong>About I-sense: </strong></p><p>I-sense is revolutionizing industrial asset management with our next-generation, AI-powered advanced Monitoring System. We move beyond traditional data logging to provide predictive, actionable intelligence. Our platform leverages advanced machine learning to deliver automated diagnostics and deep operational insights, enabling our clients to prevent failures, minimize unplanned downtime, and optimize asset performance. I-sense is not just a tool; it's a strategic partner in building more reliable and efficient operations. </p><br><p><strong>Your Mission: </strong> </p><p>We are seeking a dynamic and results-driven Business Development Specialist to be a pioneer in our expansion into the Saudi market. Based in the industrial hub of Al Jubayl, you will be instrumental in establishing I-sense as the leading predictive maintenance solution for key industries, including Cement, Fertilisers, Steel, Oil &amp; Gas, Petrochemicals, Water, and Power. You will develop and execute the go-to-market strategy, build a robust client portfolio, and drive significant revenue growth. </p><br><p><strong>Key Responsibilities: </strong></p><br><ul><li><p>Develop and execute the business development strategy to expand I-sense’s presence across Saudi Arabia, with a primary focus on the Eastern Province and key industrial sectors including Cement, Steel, Oil &amp; Gas, Petrochemicals, Water, and Power.</p></li><li><p>Identify, qualify, and pursue new business opportunities through market research, strategic prospecting, industry events, referrals, and partnership development.</p></li><li><p>Manage the complete sales cycle, from lead generation and discovery meetings to product demonstrations, proposal development, commercial negotiations, and contract closure.</p></li><li><p>Build and maintain strong relationships with key stakeholders, including plant managers, maintenance leaders, reliability engineers, procurement teams, and executive decision-makers.</p></li><li><p>Collaborate with technical and marketing teams to develop tailored value propositions, technical presentations, and commercial proposals aligned with customer requirements.</p></li><li><p>Conduct market and competitor analysis to identify industry trends, customer needs, and emerging opportunities, providing actionable insights to support business strategy.</p></li><li><p>Represent I-sense at customer meetings, exhibitions, conferences, and networking events to strengthen brand awareness and generate new business.</p></li><li><p>Maintain an accurate sales pipeline, prepare regular business development reports, and consistently achieve or exceed revenue and growth targets.</p></li><li><p>Act as the voice of the customer by sharing market feedback with product and engineering teams to support continuous product improvement.</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>Bachelor’s degree in Business Administration, Engineering, Marketing, or a related discipline.</p></li><li><p>Minimum of 3 years of experience in B2B business development, technical sales, or account management, preferably within industrial technology, SaaS, predictive maintenance, condition monitoring, automation, or asset management solutions.</p></li><li><p>Demonstrated success in managing the full sales cycle and closing high-value enterprise deals.</p></li><li><p>Strong understanding of industrial operations and maintenance environments, particularly within Oil &amp; Gas, Petrochemicals, Utilities, Power, or Water industries.</p></li><li><p>Excellent communication, negotiation, presentation, and relationship-building skills, with the ability to engage both technical and executive stakeholders.</p></li><li><p>Fluent in both English and Arabic, with strong written and verbal communication skills.</p></li><li><p>Strategic thinker with strong analytical and commercial acumen, capable of identifying market opportunities and translating them into business growth.</p></li><li><p>Self-driven, entrepreneurial, and comfortable working independently in a fast-paced, high-growth environment.</p></li><li><p>Results-oriented with a proactive approach to problem-solving and customer engagement.</p></li><li><p>An established network within Saudi Arabia’s industrial sector is highly desirable and will be considered a strong advantage.</p></li></ul><p></p></section>

<h3 >About the Role</h3> <p >TASNEE is seeking a <strong >Specialist II, Mechanical</strong> to join its team in <strong >Al Jubail</strong>. This full-time position is central to developing robust maintenance strategies, conducting detailed inspections, and preparing comprehensive plans for various mechanical systems and equipment. The role focuses on ensuring operational reliability and efficiency through expert mechanical oversight and intervention.</p> <h3 >Role Overview</h3> <p >The <strong >Specialist II, Mechanical</strong> will be responsible for preparing maintenance procedures, conducting thorough inspections, and developing equipment/system-specific inspection and preventive maintenance checklists. Key equipment areas include Diesel engines, Lifting Equipment (such as overhead cranes, forklifts, and reach stackers), and HVAC systems. This role also involves developing Statements of Work (SOW), reviewing spare parts, conducting technical evaluations of proposals, performing Risk Assessments (PH&amp;A), and MOC Evaluations.</p> <h3 >Core Duties and Tasks</h3> <ul > <li >Conduct detailed inspections of Diesel engines, HVAC, and lifting equipment, formulating precise repair recommendations.</li> <li >Develop equipment/system-specific task lists, PM Plans, CTI/TRA, and operational procedures for various mechanical assets.</li> <li >Prepare Statements of Work (SOW) for repair activities, Turnaround Maintenance (TAM), and Annual Rated Contracts (ARC).</li> <li >Perform technical evaluations of contracts and proposals, and assess materials required for maintenance and repair works.</li> <li >Conduct survey and condition-based inspections for Diesel engines, HVAC, lifting equipment, and other department-related equipment.</li> <li >Review spare parts and initiate requests for spare parts/Material Data Governance (MDG).</li> <li >Execute Risk Assessments, Root Cause Analysis, and incident investigations, including the preparation of failure reports.</li> <li >Prepare Capital Expenses Budget (Capex) and manage Management of Change (MOC) activities from initiation through closeout.</li> <li >Review and update engineering drawings and technical documents.</li> <li >Perform criticality assessment/revaluation of assets and address reliability and integrity actions for department-scope equipment.</li> <li >Coordinate and supervise project handover/takeover activities, maintain records, and update equipment master data in SAP.</li> <li >Act as an onsite lead during critical work or operational conditions.</li> </ul> <h3 >Qualifications and Experience</h3> <ul > <li >A Diploma in Mechanical / Electromechanical or a Bachelor’s degree in Mechanical / Electromechanical Engineering.</li> <li >A minimum of <strong >13 years of relevant experience</strong> in mechanical maintenance, reliability, or a related field.</li> </ul> <h3 >Location and Work Type</h3> <p >This is a <strong >full-time position</strong> based in <strong >Al Jubail</strong>, Saudi Arabia. The role requires a proactive approach to mechanical systems management and involves acting as an onsite lead during critical operational periods to ensure smooth and safe execution of tasks.</p> <h3 >Application Information</h3> <p >Candidates who meet the specified qualifications and experience are encouraged to apply for this role.</p>

<h3 >About the Role</h3> <p >ArcelorMittal Tubular Products Al-Jubail is seeking a dedicated <strong >Inspector NDT</strong> to join our team in Al Jubail, Saudi Arabia. This full-time role involves performing Non-Destructive Testing (NDT) activities on materials, ensuring the quality and traceability of inspected pipes. The Inspector will play a crucial part in maintaining equipment functionality and supporting the development of NDT personnel.</p> <h3 >Key Responsibilities</h3> <ul > <li >Perform all NDT testing activities on materials in accordance with applicable procedures, standards, and customer requirements.</li> <li >Record, maintain, and archive all inspection documents, test results, and parameters.</li> <li >Ensure traceability of inspected pipes through the L2 database and manual records.</li> <li >Maintain calibration pipes under controlled conditions and report any damage, deterioration, or unavailability to the NDT Supervisor.</li> </ul> <h3 >Equipment Management and Training</h3> <ul > <li >Perform calibration and validation of NDT machines and equipment.</li> <li >Provide on-the-job training and guidance to entry-level NDT personnel and Level II NDT inspectors.</li> <li >Execute daily inspection, housekeeping, and routine maintenance activities for NDT equipment.</li> <li >Participate in required training and examinations for certification and recertification in applicable NDT methods.</li> <li >Perform operational maintenance, troubleshooting, repair activities, and verification of NDT machines and systems.</li> </ul> <h3 >Quality and HSE Contributions</h3> <ul > <li >Execute assigned tasks efficiently and effectively, following quality directives from the immediate supervisor.</li> <li >Perform responsibilities in accordance with job descriptions, procedures, work instructions, and company documentation.</li> <li >Maintain procedures, work instructions, and other controlled documents under own responsibility.</li> <li >Contribute as a team member towards achieving AMTPJ's quality objectives, business goals, and strategic direction.</li> <li >Support AMTPJ's continual improvement initiatives to meet customer and legal requirements, and organizational objectives.</li> <li >Support internal and external audits, including follow-up actions and management of audit findings.</li> <li >Identify hazards and implement risk mitigation actions to support improved HSE performance.</li> <li >Ensure compliance with applicable legal and other HSE-IMS requirements.</li> <li >Report all HSE incidents and support the implementation of corrective actions.</li> </ul> <h3 >Required Qualifications</h3> <ul > <li >Minimum of three (3) years of relevant experience or equivalent.</li> <li >Preferred experience working with Dr. Forester MFL machines and Tuboscope automated UT NDT units.</li> <li >Good knowledge of NDT equipment setup, calibration, operation, and troubleshooting.</li> <li >Basic knowledge of the complete pipe inspection process.</li> </ul> <h3 >Work Environment</h3> <p >This is a full-time position based in Al Jubail, Saudi Arabia, within a dynamic manufacturing environment focused on tubular products.</p>

<h3 >About the Role</h3> <p >ENGIE Middle East is seeking an <strong >Electrical Technician</strong> to join our team in Al Jubayl, Saudi Arabia. This full-time role involves performing preventive, predictive, and corrective maintenance, along with troubleshooting and testing of all electrical equipment and systems within our Combined Cycle Power Plant (CCPP) and Desalination Plant. The primary objective is to ensure the safe, reliable, and efficient operation of electrical assets, thereby supporting uninterrupted power and water production. Candidates should possess 0-1 years of relevant experience and will work closely with other Electrical Technicians to maintain high quality standards.</p> <h3 >Key Responsibilities</h3> <ul > <li >Ensure strict compliance with the Integrated Management System (IMS).</li> <li >Apply practical experience in the maintenance of electrical equipment, utilizing hands-on skills and formal training.</li> <li >Organize and manage spares, tools, and equipment necessary for maintenance activities.</li> <li >Execute preventive and corrective maintenance on major electrical systems in accordance with OEM manuals and industrial best practices.</li> <li >Conduct independent troubleshooting to identify failure conditions and rectify defects efficiently.</li> <li >Collaborate with Plant Operations Personnel to resolve issues related to control equipment, under the guidance of the Electrical Foreman/Engineer.</li> <li >Perform assigned duties with minimum supervision.</li> <li >Possess practical knowledge of plant isolations to mitigate system hazards.</li> <li >Maintain comprehensive knowledge of health and safety regulations and safe working practices.</li> <li >Contribute to the department's continuous improvement in safety culture and ensure a safe working environment for self and colleagues.</li> <li >Accurately record and report all undertaken preventive and corrective maintenance jobs to the Foreman.</li> <li >Adhere to all company rules and operational procedures.</li> <li >Obtain all necessary permit authorizations for work on Electrical Systems.</li> <li >Actively participate in safety meetings, toolbox talks, and incident investigations.</li> <li >Update the Computerized Maintenance Management System (CMMS) following the completion of every activity.</li> <li >Engage in technical training and continuous professional development programs.</li> </ul> <h3 >Essential Skills and Qualifications</h3> <ul > <li >Demonstrated practical experience in maintaining electrical equipment, ideally within a power or desalination plant environment.</li> <li >Proven ability to troubleshoot electrical systems and rectify defects independently.</li> <li >Familiarity with plant isolation procedures and system hazards.</li> <li >Strong understanding and adherence to health, safety, and environmental (HSE) regulations and safe working practices.</li> <li >Capability to follow OEM manuals and industrial best practices for maintenance activities.</li> <li >Proficiency in updating and utilizing Computerized Maintenance Management Systems (CMMS).</li> </ul> <h3 >Physical Demands and Work Environment</h3> <p >The Electrical Technician role operates within demanding power plant conditions and requires significant physical and mental resilience. Candidates must meet the following criteria:</p> <ul > <li >Be medically fit to work in environments with exposure to high voltage, heat, noise, and confined spaces.</li> <li >Possess sufficient strength and stamina for extended periods of standing, walking, and climbing during inspections and supervision.</li> <li >Be capable of working at heights and in elevated areas, including on scaffolds and with overhead cranes.</li> <li >Have the ability to lift and handle electrical tools and equipment weighing up to 20–25 kg.</li> <li >Maintain good vision (with corrective lenses if required) and hearing to safely monitor electrical systems and alarms.</li> <li >Exhibit strong hand-eye coordination and dexterity for precise handling of electrical components.</li> <li >Be able to respond promptly and physically in emergency or fault conditions, including rapid movement to safe locations.</li> <li >Tolerate rotating shifts, extended working hours, emergency callouts, and physically demanding schedules as dictated by plant operational needs.</li> <li >Be free from medical conditions that may impair alertness, balance, or the safe performance of electrical supervision duties.</li> </ul> <h3 >Preferred Qualification</h3> <ul > <li >Residency in the city of Jubail is preferred to ensure quick accessibility to the plant in case of emergencies.</li> </ul> <h3 >About ENGIE Middle East</h3> <p >ENGIE Middle East is a leading energy and services group committed to accelerating the transition to a carbon-neutral world. We provide a wide range of solutions across power generation, natural gas, and energy services. We foster a culture of safety, operational excellence, and continuous development for our employees.</p>

<h3 >HYCO Supervisor Role at Air Products Qudra</h3> <p >Air Products Qudra is seeking a dedicated and experienced <strong >HYCO Supervisor</strong> to join our team in Al Jubail. This full-time position involves overseeing the operations of critical industrial gas facilities, ensuring safe, reliable, and efficient production. The role requires a seasoned professional capable of leading operational teams and managing complex processes.</p> <h3 >Overview of Responsibilities</h3> <p >The HYCO Supervisor is accountable for managing and supervising operations staff, including Boardman, Lead Operators, and Field Operators. This role encompasses facilities featuring two HYCO Steam Methane Reformers, one Off-Gas PSA facility, and a Hydrogen Import Pipeline Facility. Key responsibilities include managing day-to-day shift operations, conducting daily customer production meetings, achieving operational targets, and collaborating with Maintenance and Engineering teams for site safety and reliability.</p> <h3 >Safety Leadership and Operational Compliance</h3> <ul > <li >Provide and maintain a safe work environment, demonstrating leadership in company and industry safe work processes to prevent injuries.</li> <li >Ensure the safety of all operations personnel by utilizing the APQ Basic Safety Practice program, which includes Safety Work Permits, LOTO, and Confined Space procedures.</li> <li >Facilitate planning, organizing, auditing, and follow-up to integrate Air Products' safety culture into APQ operations.</li> <li >Ensure all Environmental Regulatory requirements are met and maintain compliance with all Corrective Maintenance (CM) and Preventive Maintenance (PM) tasks.</li> <li >Execute daily tasks such as preparing and implementing safety work permits, LOTO, and completing operations preventative maintenance activities.</li> </ul> <h3 >Technical Oversight and Production Efficiency</h3> <ul > <li >Provide direction to staff for the HYCO Steam Methane Reformer unit and ancillary equipment as prescribed by Work Instruction Procedures, operating the unit when required.</li> <li >Offer guidance based on technical feedback from the Assistant Site Manager, Site Manager, Engineering, and Maintenance for troubleshooting, maintenance, repair, and test activities.</li> <li >Provide Operations support, guidance, and lead the team during plant startups, shutdowns, and emergencies.</li> <li >Manage plant production efficiently based on data-driven decisions to meet safety and reliability targets and achieve maximum profitability.</li> <li >Work closely with the Shift Team, Assistant Site Manager, Site Manager, Maintenance Team, and Engineering team to ensure production targets are met and the plant operates at optimum energy efficiency and safety.</li> <li >Provide Operations input for scheduled outages to ensure contractual requirements are achieved.</li> </ul> <h3 >Team Development and Stakeholder Collaboration</h3> <ul > <li >Ensure Operations staff is properly trained to support operations, developing and promoting top-performing personnel who are customer and employee focused.</li> <li >Provide coaching and motivation to the operations team to achieve operational excellence and customer satisfaction.</li> <li >Establish and maintain close working relationships with engineering and maintenance personnel to continuously monitor and evaluate plant systems and equipment.</li> <li >Act as the Single Point of Contact for internal HYCO unit issues, representing APQ and coordinating internal resources.</li> <li >Maintain relationships with customer counterparts from other Refinery Units to ensure alignment of expectations for product demand.</li> <li >Provide timely progress updates to the customer and facilitate attainment of operations excellence and customer satisfaction.</li> </ul> <h3 >Required Qualifications and Experience</h3> <p >Candidates for the HYCO Supervisor position must possess a minimum of <strong >10 years of experience</strong> in a relevant operational or supervisory role within industrial gas or chemical processing facilities. This full-time role is based in Al Jubail and requires a strong commitment to safety, operational excellence, and team leadership.</p>

<h3 >About the Role</h3> <p >Zeppelin Systems Gulf is seeking a <strong >MIG/TIG Aluminium Welder</strong> to join its operations team in Al Jubail, Saudi Arabia. This is a full-time, long-term assignment focused on contributing to high-quality industrial projects within an international work environment. The role is integral to supporting the continued technical excellence of the company.</p> <h3 >Key Responsibilities</h3> <ul > <li >Perform high-quality MIG and TIG welding on aluminium components and structures.</li> <li >Prepare materials, including cutting, grinding, and fitting aluminium parts.</li> <li >Inspect welds to ensure compliance with industry standards and internal quality requirements.</li> <li >Conduct finishing operations such as polishing, deburring, and surface preparation.</li> <li >Maintain welding equipment and ensure proper calibration and functionality.</li> <li >Collaborate with fabrication, engineering, and production teams to meet project timelines.</li> <li >Follow all safety protocols, ensuring a clean and hazard-free working environment.</li> <li >Support continuous improvement initiatives in welding processes and fabrication quality.</li> </ul> <h3 >Qualifications and Experience</h3> <ul > <li >Proven expertise in MIG and TIG welding, specifically for aluminium.</li> <li >Strong understanding of fabrication techniques and quality standards.</li> <li >Ability to produce clean, precise welds with minimal distortion.</li> <li >Experience using fabrication tools, including cutting machines, grinders, and measuring instruments.</li> <li >Familiarity with safety standards and best practices in welding operations.</li> </ul> <h3 >Required Skills and Attributes</h3> <ul > <li >High attention to detail, reliability, and a structured working style.</li> <li >Ability to identify issues early and maintain consistent accuracy.</li> <li >Good communication skills.</li> </ul> <h3 >Work Environment and Assignment</h3> <p >This full-time position is based in Al Jubail, Saudi Arabia. The role requires a commitment to a long-term assignment within an international industrial setting, contributing to the operational success of Zeppelin Systems Gulf.</p>

<h3 >Company Overview and Role Introduction</h3> <p >Nama Chemicals Co., located in Al Jubail, is seeking a dedicated and skilled <strong >Instrument Technician</strong> for a full-time position. This role is central to ensuring the safe and efficient operation of the plant by leading and executing all daily instrument maintenance activities. The Instrument Technician will be responsible for troubleshooting, problem resolution, installation, and repair across a wide range of industrial instrumentation and control systems.</p> <h3 >Role Purpose and Scope</h3> <p >The Instrument Technician plays a critical role in maintaining the operational integrity of Nama Chemicals Co.'s diverse production facilities. This involves hands-on work with industrial instrumentation, process analyzers, Distributed Control Systems (DCS), Programmable Logic Controllers (PLCs), Fire &amp; Gas (F&amp;G) systems, compressor and centrifuge controls, boiler and burner control systems, and bagging machines. These systems support the production of various chemicals, including Chlor Alkali, Calcium chloride, Epichlorohydrin, Ally Alcohol, Utility Vendor Packages, Epoxy Plants, and Caustic Prilling Units.</p> <h3 >Key Responsibilities</h3> <ul > <li >Comply with Nama policies and safety procedures, contributing to target SHE rates and NAMA ISO certified quality standards.</li> <li >Perform daily maintenance activities according to Standard Maintenance Procedures, ensuring high quality, reasonable timeframes, and proper record-keeping and housekeeping.</li> <li >Provide timely feedback to supervisors on any findings or abnormalities.</li> <li >Act as a supervisor during their absence, preparing and submitting required reports.</li> <li >Respond to operation and maintenance activities (normal and emergency cases) and attend on-call if assigned.</li> <li >Attend all on-job and classroom training sessions.</li> <li >Work and troubleshoot independently due to the diverse nature of the work.</li> <li >Demonstrate proficiency in troubleshooting PLC software, DCS, Boiler Control System, and Burner Management System.</li> <li >Acquire and maintain required certifications.</li> <li >Support the supervisor in creating periodic spare parts reviews.</li> <li >Plan for Shutdown activities job lists.</li> <li >Maintain, repair, and calibrate field instruments such as Temperature Transmitters, various types of Pressure Transmitters, Level Transmitters, load cells, pH, Conductivity, and ORP sensors and their transmitters.</li> <li >Maintain, repair, and calibrate process analyzers including ECH GC, various O2 Analyzers, Propylene Analyzer, Moisture Analyzer, CO Analyzer, HCL Analyzers, free Chlorine Analyzers, and AAL GC.</li> <li >Follow up on analyzer PM schedules.</li> <li >Possess maintenance knowledge of various types of flowmeters (DP, Coriolis, electromagnetic, Vortex, etc.).</li> <li >Perform PM/servicing for all types of control valves and on-off valves (globe, butterfly, ball, diaphragm valves) and their related parts (solenoid valves, positioners, limit switches).</li> <li >Maintain, repair, and calibrate vendor packages such as bagging machines, drumming machines, weighbridges, and weighers.</li> <li >Maintain, repair, and calibrate different types of Gas Detectors installed in the plant.</li> <li >Be proficient in handling various instrument tools like Beamex Calibrators and HART communicators (375/475/4100).</li> <li >Lay out, install, and place into service new controlling and instrument devices, calibrating as required.</li> <li >Conduct periodic preventative maintenance inspections of all control instruments, diagnosing existing or potential trouble; clean, lubricate, calibrate, and adjust as conditions indicate.</li> <li >Prepare scope of work for new site jobs.</li> </ul> <h3 >Qualifications and Experience</h3> <ul > <li >3 Years Diploma in Process Instrumentation and Control from a reputed college/university.</li> <li >Vocational Training/Industrial Training Institute background.</li> </ul> <h3 >Required Skills and Knowledge</h3> <ul > <li >Excellent knowledge of Instrumentation and independent troubleshooting.</li> <li >Basic knowledge of DCS and troubleshooting.</li> <li >Excellent knowledge of Programmable Logic Controllers and their troubleshooting.</li> <li >Good troubleshooting knowledge of Analyzers, including basic GC operation and troubleshooting.</li> <li >Computer knowledge and ability to create Purchase Requisitions (PR) in the SAP system.</li> <li >Ability to lead a small team.</li> <li >Knowledge of Industrial safety procedures and standards, including experience in confined space, hot works, working on heights, and energy isolation requirements.</li> <li >Knowledgeable in hazard identification related to environmental aspects and personal safety.</li> <li >Strong ability to perform risk assessments before obtaining permits and to implement mitigation steps during the job (*, PPE requirements, process isolation).</li> <li >Fully aware of Plant EHS requirements for safe task execution.</li> </ul>

<h3 >About KBR Saudi Arabia and the Welder II Role</h3> <p >KBR Saudi Arabia, through its Sustainable Technology Solutions (STS) division, delivers holistic and value-added solutions across the entire asset life cycle. These solutions encompass world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, and high-end design capabilities. The company is seeking a <strong >Welder II</strong> to join its team in Al Jubail. This full-time position requires 2-5 years of experience in welding operations.</p> <h3 >Core Function of the Welder II</h3> <p >The primary responsibility of the Welder II is to execute all welding jobs on various kinds of material and material combinations according to specified drawings and quality standards. This role also involves the operation of all machines within the welding shop.</p> <h3 >Key Responsibilities</h3> <ul > <li >Lead and support Welder I, Welder II, and Welder III personnel in performing all types of welding jobs as per welding procedures provided by the supervisor.</li> <li >Perform welding activities both in the field and within the plant environment.</li> <li >Monitor ongoing welding jobs to ensure adherence to standards and progress.</li> <li >Assist in field investigation work to support the failure analysis of welding.</li> <li >Log all detailed progress of field work and produce reports for the supervisor.</li> <li >Select correct tools and conduct thorough tool inspections prior to use.</li> </ul> <h3 >Quality and Safety Compliance</h3> <ul > <li >Ensure the completion of all jobs meets specified quality specifications and project schedules.</li> <li >Communicate immediately with the supervisor upon job completion.</li> <li >Ensure full compliance with all safety procedures during welding jobs.</li> <li >Encourage the reporting of unsafe acts and conditions within the workplace.</li> <li >Comply with all Safety, Health, and Environment (SHE) procedures both prior to and during work commencement.</li> <li >Participate in Tool Box talks before commencing any welding job.</li> </ul> <h3 >Required Qualifications and Experience</h3> <ul > <li >Hold a valid certification issued by a recognized third-party certification body or an accredited Saudi institute, attesting to the individual’s qualifications and competency to perform welding works.</li> <li >2-5 years of demonstrated experience in welding operations.</li> </ul>

<h3 >About the Role</h3> <p >Nama Chemicals Co. is seeking a <strong >Superintendent, Electrical &amp; Instrument</strong> to join our team in Al Jubail. This full-time role involves planning, directing, and coordinating the maintenance of industrial electrical systems and instrumentation. The Superintendent will oversee the maintenance of critical systems including DCS, PLC, F&amp;G systems, and bagging machines, ensuring reliable plant operation through professional and effective centralized Electrical and Substation system, Instrumentation &amp; control system maintenance services.</p> <h3 >Key Responsibilities</h3> <ul > <li >Manage daily Electrical &amp; Instrumentation (E&amp;I) maintenance activities, assess risks, and ensure the provision of necessary tools and manpower for completing work.</li> <li >Monitor equipment regularly, take proactive action to prevent breakdowns, and ensure equipment reliability.</li> <li >Manage breakdowns and preventive maintenance, ensuring accurate data entry in SAP/MS Access.</li> <li >Update equipment history files and implement maintenance programs in line with established Key Performance Indicators (KPIs).</li> <li >Utilize SAP and other available tools effectively for maintenance management.</li> <li >Identify process or equipment problems causing excessive repair costs or equipment failures, and implement appropriate control measures.</li> <li >Direct maintenance work as per scope and ensure prompt and adequate service is provided to user organizations.</li> <li >Consult with user/proponent organizations to determine their plans and programs, nature and extent of work, and plan and schedule preventive maintenance programs.</li> <li >Make decisions regarding job priorities, equipment utilization, repair alternatives, and maintenance methods to minimize plant downtime and reduce losses.</li> <li >Work closely with operating and engineering personnel to solve maintenance or abnormal wear/breakdown problems.</li> <li >Make decisions or recommendations regarding best practices and operating procedures.</li> <li >Audit draft contract proposals, initiate and approve service orders, and accept or reject completed work.</li> <li >Ensure proper functioning of building systems such as air conditioning, lighting, and communication systems.</li> <li >Participate in new projects or construction activities as directed by management.</li> <li >Carry out Management of Change (MOC) processes after team approval.</li> <li >Maintain relevant records and benchmark the maintenance system.</li> </ul> <h3 >Strategic Management and Coordination</h3> <ul > <li >Perform human resource responsibilities and consult with user/proponent organizations to plan and schedule preventive maintenance programs.</li> <li >Prepare manpower schedules, expenditure budgets, and CAPEX budgets based on business plans and goals to promote plant reliability and cost control.</li> <li >Maintain overall control of cost, manpower, and plant reliability.</li> <li >Plan and schedule work activities, safety programs, and preventive maintenance.</li> <li >Coordinate with vendors for necessary Annual Maintenance Contracts (AMC).</li> <li >Ensure that engineers, technicians, craftsmen, and contracted manpower perform quality work.</li> <li >Provide training to subordinates.</li> <li >Participate in turnaround maintenance/shutdown preparation, coordination, execution, quality checks, and follow-up.</li> <li >Safely handle all shutdown programs and annual turnaround maintenance works.</li> </ul> <h3 >Safety and Compliance</h3> <ul > <li >Comply with Nama Chemicals Co. policies, Safety, Health, and Environment Management System procedures, and contribute to achieving target rates while complying with quality procedures and ISO certified standards.</li> <li >Accountable for all subordinates’ safety compliance and leading assigned safety investigations or analyses.</li> <li >Develop and implement safety measures to ensure the safe handling of Electrical &amp; Instrumentation systems, with a focus on achieving zero accidents/incidents.</li> </ul> <h3 >Qualifications and Experience</h3> <ul > <li >A minimum of <strong >10 years of relevant experience</strong> in industrial electrical system maintenance and instrumentation.</li> </ul> <h3 >Work Environment</h3> <p >This is a full-time position located in Al Jubail, requiring a proactive approach to ensure the continuous and reliable operation of plant systems through expert maintenance and strategic oversight.</p>

<h3 >About the Role</h3> <p >Amentum is seeking an <strong >Aviation PMI Evaluator MH R</strong> to join our team in Al Jubail, Eastern, Saudi Arabia. This full-time position involves performing in-depth Organizational, Intermediate, and Depot level inspections on MH-60R helicopters, including surface, structural, fuel cell, and major component inspections. The role provides essential Field and Sustainment Level maintenance support and augmentation to achieve the aviation maintenance mission of the Royal Saudi Naval Forces (RSNF) Planned Maintenance Interval (PMI) Team.</p> <h3 >Key Responsibilities</h3> <ul > <li >Conduct in-depth inspections on MH-60R helicopters at Organizational, Intermediate, and Depot levels, covering surface, structural, fuel cell, and major components.</li> <li >Provide Field and Sustainment Level maintenance support, including Maintenance Control, Quality Control, Supply Management, and aircraft repair.</li> <li >Serve as a fully qualified Quality Control Specialist for the RSNF PMI Team, demonstrating strong working knowledge of the Naval Aviation Maintenance Program (NAMP) and ****</li> <li >Assist and train RSNF personnel on compliance with NAMP standards, particularly in Performance Management and Inspection (PMI) evaluations.</li> <li >Perform Field Level maintenance, inspections, troubleshooting, testing, maintenance repairs, and Technical Directive compliance on MH-60R Airframes.</li> <li >Complete and maintain applicable forms, records, and reports using appropriate references and publications, including the NAMP.</li> <li >Provide On-the-Job-Training (OJT) for Saudi technicians and other personnel, maintaining records such as Readiness Insight or ASMi.</li> <li >Inspect aircraft, systems, equipment, and parts to ensure safe flying and conformance to specifications and regulations; oversee part installation and inspect adjustments.</li> <li >Perform pre-flight and post-flight inspections, identifying any breaches of safety standards.</li> <li >Assist in maintaining safety standards within the shop, hangar, and on the flight line.</li> <li >Accept accountability for property within the Power Plant Shop.</li> <li >Maintain cleanliness and general upkeep of the assigned work area, including cleaning, preservation, and operational maintenance of vehicles, tools, and equipment.</li> <li >Operate motor vehicles, machines, and other mechanical equipment as required for duties.</li> </ul> <h3 >Commitment to Standards</h3> <p >Amentum maintains a strong commitment to safety, quality, and procedure compliance. All employees are responsible for continuously developing and maintaining a safe work environment, completing required training, and participating in emergency response tasks. Quality is foundational to business management and customer satisfaction, requiring adherence to the Amentum Quality Policy and applicable Quality System documents. Employees must understand and implement operational, safety, quality, and environmental requirements pertaining to their role.</p> <h3 >Required Experience and Qualifications</h3> <ul > <li >Minimum of <strong >5-10 years of experience</strong> as an Aviation PMI Evaluator or in a similar role.</li> <li >Proven capability to perform Organizational, Intermediate, and Depot level inspections on MH-60R helicopters.</li> <li >Demonstrated expertise as a Quality Control Specialist with a strong working knowledge of the NAMP and the ****</li> <li >Ability to assist and train personnel on Naval Aviation Maintenance Program (NAMP) standards.</li> <li >Proficiency in maintenance, inspections, troubleshooting, testing, and repair of aircraft.</li> </ul> <h3 >Work Environment and Physical Demands</h3> <p >This role requires the ability to perform essential duties satisfactorily, which may involve various physical demands. Candidates must be able to walk and stand on level and/or inclined surfaces for extended periods, climb stairs, ramps, ladders, and work stands. The position may require crouching, crawling, grasping objects, using finger dexterity, bending, reaching above/below shoulders, and lifting up to 50 pounds. Visual requirements include seeing aircraft in flight, reading dials/gauges, identifying small objects and tools, discerning imperfections, and reading micrometers. Effective verbal communication and auditory perception are necessary, along with the ability to distinguish colors and judge three-dimensional depth. Operation of power vehicles, machinery, hand tools, ground support equipment, forklifts, and APUs may be required.</p> <h3 >Application Process</h3> <p >Candidates meeting the qualifications are encouraged to apply for this full-time position with Amentum in Al Jubail, Saudi Arabia.</p>