Technical Analysts Jobs - Medina Saudi

<h3 >About the Role</h3> <p >SEVEN is seeking a highly skilled and experienced <strong >Senior Technician - Maintenance</strong> to join our team on a full-time basis. This critical role involves performing a variety of advanced-level planned maintenance, repair activities, and troubleshooting for attraction rides and devices across our projects in Riyadh, Tabuk, Abha, Yanbu, and Medina. The Senior Technician will lead work execution alongside other attraction technicians, actively supporting onsite installations, collaborating with contractors and manufacturers to ensure SEVEN’s maintenance requirements and operational readiness are met.</p> <h3 >Key Responsibilities</h3> <ul > <li >Lead and execute technical activities for rides and attractions, supported by the technician team and technical management.</li> <li >Perform advanced planned maintenance, repair, and troubleshooting for attraction rides and devices of all typologies.</li> <li >Actively participate with Operations, Project Attraction Teams, and Project Management Consultants.</li> <li >Maintain close communication with ride manufacturers' representatives engaged at SEVEN project sites.</li> <li >Act as Team Leader when required during absences, verifying the quality and accuracy of technicians' work, particularly on safety-critical inspections and repairs.</li> </ul> <h3 >Maintenance Operations and Compliance</h3> <ul > <li >Execute and record corrective maintenance activities on rides and attractions in accordance with industry standards and manufacturer requirements.</li> <li >Execute and record planned preventive maintenance activities according to approved schedules.</li> <li >Respond to ride and attraction breakdowns, diagnose faults, and restore operations safely and efficiently.</li> <li >Lead and execute major annual maintenance and rehabilitation activities to ensure optimal ride performance.</li> <li >Support daily ride operational readiness and achievement of reliability and availability targets.</li> <li >Work in accordance with international safety best practices and KSA regulatory requirements, adhering to all QHSE policies, procedures, and company standards.</li> </ul> <h3 >Technical Support and Development</h3> <ul > <li >Contribute to the continuous improvement of technical documentation, including SOPs, technical manuals, troubleshooting guides, and PM checklists.</li> <li >Support the implementation and effective use of asset management systems and related documentation.</li> <li >Monitor spare parts and consumable stock requirements, providing proactive feedback to support availability.</li> <li >Conduct inspections of tools and equipment, ensuring compliance with calibration and safety requirements.</li> <li >Deliver training and maintain training records in line with Learning &amp; Development requirements.</li> <li >Identify opportunities to improve ride performance, maintenance efficiency, and operational effectiveness.</li> </ul> <h3 >Qualifications and Experience</h3> <ul > <li >An Engineering Certificate or Diploma in a relevant technical field (Electrical, Mechanical, or Electromechanical).</li> <li >A minimum of <strong >5 years of experience</strong> in the leisure, attractions, or theme park industry, with a preference for candidates possessing 5-10 years of experience.</li> <li >Demonstrated hands-on experience in major ride and attraction maintenance activities, including annual rehabilitation (REHAB).</li> </ul> <h3 >Work Environment and Company Values</h3> <p >The Senior Technician will contribute to achieving departmental objectives and KPIs aligned with SEVEN’s strategic goals. This role requires effective communication with Operations teams to resolve technical issues and a commitment to promoting guest experience excellence while maintaining the highest safety standards. You will be expected to support SEVEN’s vision, mission, and values, and adhere to the SEVEN Code of Conduct, upholding the highest standards of integrity.</p>

<h3 >About Abdul Latif Jameel</h3> <p >Abdul Latif Jameel is a diversified business with deep roots and extensive operations across the Middle East, North Africa, and Turkey (MENAT region). With a history spanning over 75 years, beginning as a small trading business and a Toyota distributorship in Jeddah, Saudi Arabia, the company has established a significant vehicle distribution network and comprehensive automotive expertise. This foundation has enabled diversification into new sectors that contribute to the 'infrastructure of life' in the MENAT region.</p> <h3 >Role Overview: Toyota Technician</h3> <p >Abdul Latif Jameel is seeking a <strong >Toyota Technician</strong> to join its full-time team in <strong >Yanbu, Al Madinah, Saudi Arabia</strong>. This role is responsible for performing mechanical repair services and other related works within the service center. The primary objective is to achieve targets in customer satisfaction and gross service sales by adhering to the company's mission, vision, values, and standard operating procedures.</p> <h3 >Key Responsibilities</h3> <ul > <li >Perform mechanical repairs as per customer requests, ensuring proper execution, timely completion, and adherence to estimated costs under Chief Technician supervision.</li> <li >Conduct preliminary vehicle inspections and evaluations using appropriate tools and equipment to accurately assess damage and determine the extent of repair.</li> <li >Participate in resolving complex technical problems with the assistance of Team Leaders (Workshop Production Manager/Chief Technician) through testing and examination.</li> <li >Execute after-sales responsibilities, including vehicle repairs and periodic maintenance, in accordance with company policies and procedures.</li> <li >Maintain high customer satisfaction by adopting a Guest-Centric mindset and adhering to service standards.</li> <li >Coordinate with the Job Controller for accurate data entry (operation numbers), recording repairs, and updating vehicle delivery status using Computerized Time Control Sheets for productivity analysis.</li> <li >Receive and apply technical information, service bulletins, and daily updates from the Team Leader to enhance technical skills and ensure smooth after-sales operations.</li> <li >Support center after-sales marketing campaigns, promote Kaizen activities, and contribute to business strategy adjustments to achieve set center targets.</li> <li >Ensure the suitable use of all service facilities, tools, and equipment, adhering to company policies related to safety, welfare, integrity, and brand image.</li> <li >Execute assigned activities according to company Standard Operating Procedures (SOPs), coordinating with center service teams to achieve pre-determined operational targets.</li> <li >Adhere to the 5S concept (Sorting, Set in Order, Shine, Standardize, Sustain) to maintain a clean and organized workplace.</li> <li >Ensure work completion meets required quality standards by following Toyota Motor Corporation (TMC) guidelines and utilizing correct tools.</li> <li >Achieve standard sold hours versus attending hours.</li> </ul> <h3 >Qualifications and Experience</h3> <ul > <li >A minimum of <strong >2-5 years of relevant experience</strong> in mechanical repair services.</li> <li >Proficiency in implementing Abdul Latif Jameel (ALJ) and Toyota Motor Corporation (TMC) policies and Standard Operating Procedures (SOPs) related to service.</li> <li >Familiarity with Service Operation compliance policies.</li> <li >Knowledge of Mechanical Kodawari principles.</li> </ul> <h3 >Context and Framework</h3> <p >This position has a direct impact on sold working hours and customer satisfaction. The Technician operates within a defined framework that requires strict adherence to ALJ and TMC Policies and SOPs related to service, as well as compliance with Service Operation policies. A strong understanding of Mechanical Kodawari is essential for the effective execution of this role.</p> <h3 >Working at Abdul Latif Jameel</h3> <p >Abdul Latif Jameel is recognized as a leading employer across the MENAT region, with an international footprint offering diverse opportunities globally. The company's culture is guided by core values including <strong >Respect, Innovation, a Pioneering Spirit, and Empowerment</strong>, fostering an environment where professional growth and new ideas are supported.</p>

<h3 >About John Crane and the Field Service Engineer Role</h3> <p >John Crane, a business of Smiths Group, is a global leader in mission-critical flow control solutions for energy and process industries. We are seeking a <strong >Field Service Engineer</strong> to join our team in Yanbu, Al Madinah. This full-time role requires 2-5 years of relevant experience and focuses on delivering expert technical support and service to our clients.</p> <h3 >Role Summary and Impact</h3> <p >The Field Service Engineer will be responsible for providing prompt technical support and exceptional service to clients, primarily focusing on mechanical seals and rotating equipment. This position requires a proactive approach to problem-solving and a commitment to maintaining John Crane’s standards of excellence in the field, ensuring efficient and sustainable operations for our customers.</p> <h3 >Primary Responsibilities</h3> <ul > <li >Conduct regular customer site visits for the installation and troubleshooting of mechanical seals and associated equipment.</li> <li >Produce comprehensive seal observation reports, including detailed analysis and recommendations.</li> <li >Perform on-site and in-workshop repairs with precision.</li> <li >Assist end users during shutdowns and project commissioning.</li> <li >Support and maintain refurbishment contracts.</li> <li >Conduct measurements and site surveys while coordinating installations.</li> <li >Collaborate effectively with stakeholders, local teams, and agents.</li> <li >Participate in technical reviews to ensure optimal performance of products and services.</li> <li >Maintain and increase the company's market presence with key end users, identifying new opportunities within the assigned territory.</li> <li >Establish and nurture strong relationships with end users.</li> <li >Discuss and resolve complex equipment issues and support project requirements for customers.</li> </ul> <h3 >Candidate Qualifications</h3> <ul > <li >2-5 years of experience in a relevant field.</li> <li >Strong expertise in mechanical seals and rotating equipment.</li> <li >Proven ability to perform effectively in proactive, multinational, and multicultural environments.</li> <li >Strong technical knowledge of John Crane’s product portfolio, or demonstrated ability to rapidly acquire deep product understanding.</li> </ul> <h3 >About John Crane</h3> <p >John Crane is a global leader in providing mission-critical flow control solutions that enable efficient and sustainable operations for energy and process industries. Our product portfolio includes mechanical seals and systems, couplings, filtration systems, and predictive digital monitoring technologies. With a global network of over 200 sites in more than 50 countries and a workforce exceeding 6,000 employees, we partner with customers to enhance operational safety, reduce downtime, improve efficiency, and meet environmental standards.</p> <h3 >Join Our Team</h3> <p >John Crane offers an opportunity to contribute to a global leader in flow control solutions. We invite qualified candidates to apply and become part of a team dedicated to engineering operational excellence.</p>

<h3 >About Abdul Latif Jameel and the Role</h3> <p >Abdul Latif Jameel is a diversified business with deep roots and established operations across the Middle East, North Africa, and Turkey (MENAT region). The company represents some of the world’s leading brands, fostering trust and building long-lasting, mutually beneficial relationships. We are seeking a dedicated <strong >Auto Technician Diagnostic</strong> to join our team in Yanbu, Al Madinah, Saudi Arabia.</p> <h3 >Purpose of the Role</h3> <p >The primary purpose of this full-time role is to perform comprehensive repair services and other mechanical works within the service center. The technician will contribute to achieving targets in customer satisfaction and gross service sales by adhering to the company's mission, vision, values, and applying standard operating procedures.</p> <h3 >Key Responsibilities</h3> <ul > <li >Perform repairs accurately and efficiently, ensuring all customer requests on the repair order are completed to a high-quality standard within the promised delivery time.</li> <li >Identify the extent of vehicle damage and communicate any additional repair items found to the Foreman, who will then inform the Service Advisor for customer information and concurrence.</li> <li >Execute after-sales responsibilities, including vehicle repairs and periodic maintenance, in strict accordance with company policies and procedures, through effective communication and supervision by the Team Leader.</li> <li >Receive and interpret technical information, service bulletins, and daily functional updates from the Team Leader to continuously enhance technical skills and ensure smooth after-sales business operations.</li> <li >Support and assist in center after-sales marketing campaigns, promote center Kaizen activities, and adjust to business strategies to achieve established center targets.</li> <li >Execute assigned activities according to the company’s standard operating procedures, coordinating with center service teams to meet pre-determined operational targets.</li> </ul> <h3 >Qualifications and Experience</h3> <p >Candidates for this role should possess <strong >2-5 years of relevant experience</strong> as an Auto Technician, with a strong focus on diagnostic capabilities. A proven track record of performing high-quality repair services is essential.</p> <h3 >Workplace Standards and Operations</h3> <ul > <li >Handle customer vehicles and belongings with care, utilizing protective equipment (seat covers, floor mats, fender covers) to maintain cleanliness and returning vehicles in a clean condition.</li> <li >Maintain an adequate inventory of personal hand tools necessary for service and repair requirements, performing services with zero comebacks to achieve monthly productivity targets set by the Service Manager.</li> <li >Ensure the appropriate use of all service facilities, tools, and equipment, operating in accordance with company policies related to safety, welfare, integrity, and brand image.</li> <li >Adhere to accurate clocking practices by clocking on and off for personal time and for every repair order.</li> <li >Maintain a clean and professional appearance at all times, including keeping the workshop area tidy and organized in line with company environmental safety policies.</li> </ul> <h3 >Location and Employment Type</h3> <p >This <strong >full-time</strong> position is based in <strong >Yanbu, Al Madinah, Saudi Arabia</strong>. We invite qualified candidates to apply and contribute to our service excellence.</p>

<div dir="rtl"><h3 >نبذة عن الوظيفة</h3> <p >تبحث شركة نبني عن <strong >فني تدفئة وتهوية وتكييف</strong> للانضمام إلى فريقها في المدينة المنورة. يركز هذا الدور بدوام كامل على تركيب وصيانة وتصليح معدات التكييف والتدفئة والتهوية، بما في ذلك الوحدات ومضخات التدفئة ومكيفات الهواء. يتطلب الدور خبرة عملية تتراوح بين سنتين وخمس سنوات في المجال.</p> <h3 >المهام والمسؤوليات الرئيسية</h3> <p >يتولى فني التدفئة والتهوية والتكييف مجموعة من المهام الأساسية لضمان كفاءة وسلامة الأنظمة. تشمل المسؤوليات الرئيسية ما يلي:</p> <ul > <li >تركيب معدات التكييف والتدفئة والتهوية المختلفة، مثل وحدات التكييف ومضخات التدفئة.</li> <li >إجراء أعمال الصيانة الدورية والوقائية لهذه الأنظمة لضمان أدائها الأمثل.</li> <li >تشخيص الأعطال وإصلاحها بكفاءة لضمان استمرارية عمل المعدات.</li> </ul> <h3 >المساهمة في المشاريع والدعم الفني</h3> <p >يقدم شاغل الوظيفة الدعم الفني اللازم للمشاريع الهندسية ويساهم في مراحل مختلفة من العمل. تتضمن هذه المساهمات:</p> <ul > <li >المساهمة في عملية تصميم نظم التهوية وتكييف الهواء والتدفئة، وتقديم المشورة الفنية حول المواد ومعايير الجودة.</li> <li >تقديم الدعم للمشروعات الهندسية، والإشراف على تنفيذ العمليات وتركيب النظم.</li> <li >المساعدة في وضع الجداول الزمنية وتقديرات التكلفة للمشاريع المتعلقة بالأنظمة.</li> </ul> <h3 >مراقبة الجودة والامتثال</h3> <p >يعد ضمان الجودة والالتزام بالمعايير جزءاً أساسياً من هذا الدور، حيث يشمل ذلك:</p> <ul > <li >مراقبة الجوانب الفنية المتعلقة بإنتاج وتركيب واستعمال وصيانة منظومات وأجهزة ومعدات التدفئة والتهوية والتكييف.</li> <li >التأكد من دقة الأداء ومطابقة المواصفات الفنية المعتمدة لهذه الأنظمة.</li> <li >الالتزام الصارم بسياسات وإجراءات الصحة والسلامة والبيئة المعمول بها في الشركة.</li> </ul> <h3 >المؤهلات والخبرات المطلوبة</h3> <p >لشغل هذا المنصب، يجب أن يمتلك المرشح المؤهلات والخبرات التالية:</p> <ul > <li >خبرة عملية تتراوح بين <strong >سنتين إلى خمس سنوات</strong> في مجال التدفئة والتهوية وتكييف الهواء.</li> <li >فهم قوي لمبادئ عمل أنظمة التكييف والتدفئة والتهوية ومكوناتها.</li> <li >القدرة على قراءة المخططات الفنية وتطبيقها في عمليات التركيب والصيانة.</li> </ul> <h3 >بيئة العمل والموقع</h3> <p >يعمل فني التدفئة والتهوية والتكييف ضمن فريق شركة نبني في <strong >المدينة المنورة</strong>. الوظيفة بدوام كامل وتتطلب التزاماً كاملاً بالمهام الموكلة لضمان سير العمل بكفاءة وفعالية.</p></div>

<ul><li>Execute post-weld heat treatment (PWHT) procedures precisely according to engineering specifications and applicable codes (e.g., ASME, API).</li><li>Set up and operate various heating equipment, including resistance heating elements, induction heating systems, and furnaces, ensuring proper insulation.</li><li>Monitor and record temperature profiles using calibrated thermocouples and data loggers throughout the entire heating and cooling cycle.</li><li>Troubleshoot and resolve heating anomalies or equipment malfunctions promptly to maintain treatment integrity and project timelines.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>High School Diploma or equivalent qualification.</li><li>Certified as a Level II or Level III Non-Destructive Testing (NDT) technician with a specialization in PWHT.</li><li>Minimum of 5 years of hands-on experience in performing PWHT on diverse materials and components in industrial settings.</li><li>Proficiency in interpreting welding procedures, code requirements (ASME Section IX, API , and P&IDs.</li></ul>

<div dir="rtl"><h3 >نبذة عن الدور</h3> <p >تبحث شركة سراكو عن <strong >فني اطفاء</strong> للانضمام إلى فريقها في المدينة المنورة. يركز هذا الدور على دراسة وتتبع المخططات الخاصة بعمليات الإطفاء، وإعداد قوائم بالمواد والأدوات اللازمة، بالإضافة إلى تطوير خطط الإطفاء ومراقبة تنفيذها. تتطلب الوظيفة الالتزام بتطبيق إجراءات وتعليمات السلامة والصحة المهنية لضمان بيئة عمل آمنة وفعالة.</p> <h3 >المهام والمسؤوليات الرئيسية</h3> <ul > <li >دراسة وتحليل المخططات الفنية المعدة لعمليات الإطفاء ومتابعتها بدقة.</li> <li >تحديد وإعداد قوائم تفصيلية بالمواد والأدوات والمعدات الضرورية لتنفيذ أعمال الإطفاء المختلفة.</li> <li >تطوير خطط الإطفاء الشاملة، والإشراف على تنفيذها، وضبط العمليات لضمان الفعالية.</li> <li >إعداد جداول زمنية لتنفيذ الأعمال المتعلقة بالإطفاء وتوزيع المهام بفعالية على فريق العمل.</li> <li >الالتزام الصارم بتطبيق جميع إجراءات وتعليمات السلامة والصحة المهنية في كافة مراحل العمل.</li> </ul> <h3 >التخطيط والتنظيم الفني</h3> <p >يتولى شاغل الوظيفة مسؤولية التخطيط المسبق لجميع متطلبات عمليات الإطفاء، بدءًا من دراسة المخططات الهندسية وصولاً إلى إعداد قوائم دقيقة بالمواد والأدوات. يشمل ذلك أيضاً وضع خطط عمل مفصلة لمكافحة الحرائق ومراقبة سير العمليات لضمان تحقيق الأهداف المرجوة بكفاءة عالية.</p> <h3 >الالتزام بمعايير السلامة</h3> <p >يعد تطبيق إجراءات وتعليمات السلامة والصحة المهنية جزءاً أساسياً من هذا الدور. يتوجب على فني الإطفاء ضمان الالتزام بكافة المعايير الوقائية لحماية الأفراد والممتلكات، والعمل على نشر ثقافة السلامة ضمن بيئة العمل.</p> <h3 >المؤهلات والخبرات المطلوبة</h3> <ul > <li >خبرة عملية تتراوح بين <strong >2 إلى 5 سنوات</strong> في مجال الإطفاء أو مجال ذي صلة.</li> <li >القدرة على قراءة وتتبع المخططات الفنية.</li> <li >معرفة جيدة بإجراءات السلامة والصحة المهنية.</li> </ul> <h3 >تفاصيل العمل والموقع</h3> <p >هذه الوظيفة بدوام كامل ومقرها في <strong >المدينة المنورة</strong>. تقدم شركة سراكو بيئة عمل احترافية تساهم في تطوير المهارات والخبرات في مجال الإطفاء والسلامة.</p></div>

<div dir="rtl"><h3 >نبذة عن الدور</h3> <p >تبحث شركة محمد عبدالعزيز عبدالرحمن المديهش للحديد عن <strong >فني حساب كميات</strong> للانضمام إلى فريقها في المدينة المنورة. يتولى شاغل هذا الدور مسؤولية تقدير وحساب كميات المواد اللازمة لتنفيذ الأعمال، بالإضافة إلى إعداد جداول الأعمال المنجزة والمطالبات المالية للمشاريع. هذه الوظيفة بدوام كامل وتتطلب خبرة تتراوح بين 0-1 سنة.</p> <h3 >الغرض من الوظيفة</h3> <p >يهدف هذا الدور إلى ضمان الدقة في تقدير الكميات والمطالبات المالية للمشاريع الإنشائية. يشمل ذلك التحليل الدقيق للمخططات الهندسية والمواصفات الفنية لحساب المواد، ومتابعة الأعمال المنجزة لإعداد الجداول والمطالبات، مع الالتزام بمعايير السلامة والصحة المهنية.</p> <h3 >المسؤوليات الرئيسية</h3> <ul > <li >دراسة المخططات الهندسية والمواصفات الفنية لحساب كميات المواد اللازمة لتنفيذ الأعمال.</li> <li >حساب كميات المواد الموردة للموقع، وتقدير التكاليف الكلية للمشروع.</li> <li >إعداد جداول كميات الأعمال المنجزة وتوثيقها على النماذج المخصصة.</li> <li >إعداد وتدقيق المطالبات المالية للمشروع، مع توثيق التعديلات على أسعار البنود.</li> <li >تطبيق إجراءات وتعليمات السلامة والصحة المهنية.</li> </ul> <h3 >المؤهلات والخبرات المطلوبة</h3> <ul > <li >خبرة عملية تتراوح بين <strong >0 إلى 1 سنة</strong> في مجال حساب الكميات أو مجال ذي صلة.</li> <li >القدرة على قراءة وفهم المخططات الهندسية والمواصفات الفنية للمشاريع.</li> <li >مهارات جيدة في استخدام برامج الحاسوب ذات الصلة (مثل برامج الأوفيس).</li> </ul> <h3 >بيئة العمل</h3> <p >يعمل فني حساب الكميات ضمن فريق شركة محمد عبدالعزيز عبدالرحمن المديهش للحديد في المدينة المنورة. الوظيفة بدوام كامل وتتطلب الالتزام بجدول العمل المحدد لضمان سير المشاريع بكفاءة ودقة.</p> <h3 >للتقديم</h3> <p >ندعو المهتمين ممن تنطبق عليهم المتطلبات المذكورة أعلاه إلى تقديم طلباتهم لهذه الفرصة في المدينة المنورة.</p></div>

<h3 >About King Faisal Specialist Hospital &amp; Research Center</h3> <p >King Faisal Specialist Hospital &amp; Research Center (KFSH) in Medina is seeking a <strong >Patient Care Technician for Outpatient Care</strong>. This full-time role is integral to supporting the daily operations of the unit/department and contributing to the delivery of safe, patient and family-focused quality care.</p> <h3 >Role Overview</h3> <p >The Patient Care Technician provides direct assistance to patients, ensuring their personal needs are met and contributing to a positive patient experience. This role involves monitoring patient activities, recording vital information, and supporting clinical staff in various patient care tasks within an outpatient setting.</p> <h3 >Key Responsibilities</h3> <ul > <li >Contribute to achieving clinical quality outcome indicators, including patient satisfaction.</li> <li >Uphold and apply organizational values in providing quality patient care.</li> <li >Provide direct assistance to patients with personal hygiene needs, including bed baths/showering, dressing/undressing, toileting, and oral hygiene.</li> <li >Assist patients with eating and drinking, ensuring fresh water is available.</li> <li >Support patient movement and handling, including re-positioning bedridden patients and mobilization.</li> <li >Monitor patient activities and report all patient-related information to the Staff Nurse I / Staff Nurse II (SNl/SNll) accurately, appropriately, and in a timely manner, including unusual occurrences.</li> <li >Measure and record temperature, blood pressure, pulse and respiration rates, oxygen saturation, food and fluid intake and output, height, and weight as directed, informing the SNl/SNll of any abnormal recordings.</li> <li >Accurately measure, empty, and document the content of urinary catheters and drains.</li> <li >Document all relevant information correctly, appropriately, and in a timely manner.</li> <li >Receive patients for admission and orientate them to the room/unit and services.</li> <li >Prepare patients for procedures as directed, assist the physician, and remain with the patient if required.</li> <li >Collect specimens such as urine, feces, or sputum as directed.</li> <li >Provide comfort measures such as back care, head, foot, and hand massage as needed.</li> <li >Assist patients with preparations for prayer if needed.</li> </ul> <h3 >Qualifications and Experience</h3> <ul > <li >Current Patient Care Technician licensure from the Saudi Commission for Health Specialist.</li> <li >0-1 years of relevant experience.</li> </ul> <h3 >Work Setting</h3> <p >This is a <strong >full-time</strong> position based in <strong >Medina</strong>, within the outpatient care department of King Faisal Specialist Hospital &amp; Research Center.</p> <h3 >Join Our Team</h3> <p >Join KFSH and contribute to providing exceptional patient care in a leading medical institution dedicated to health and research.</p>

<div dir="rtl"><h3 >نبذة عن الدور</h3> <p >تبحث شركة محمد عبدالعزيز عبدالرحمن المديهش للحديد عن <strong >فني كهربائي تمديدات كهربائية</strong> للانضمام إلى فريقها في المدينة المنورة. يركز هذا الدور بدوام كامل على الإشراف الفني الشامل على مشاريع التمديدات الكهربائية، بدءًا من دراسة المخططات وتقدير الاحتياجات، وصولًا إلى متابعة التنفيذ وتشخيص الأعطال ومعالجتها. يتطلب الدور خبرة عملية تتراوح بين سنتين وخمس سنوات في مجال التمديدات الكهربائية.</p> <h3 >المهام والمسؤوليات الرئيسية</h3> <ul > <li >دراسة وتحليل مخططات التمديدات الكهربائية لمختلف التطبيقات (المنزلية، الصناعية، التجارية) ومكوناتها.</li> <li >تقدير كميات المواد والأجهزة المطلوبة لتنفيذ أعمال التمديدات الكهربائية، وتأمين التجهيزات اللازمة مع مطابقة مواصفاتها.</li> <li >متابعة مراحل تنفيذ أعمال التمديدات الكهربائية، والإشراف على تشغيل دارات التمديدات، وإجراء الفحوصات اللازمة مثل فحوص العازلية والاستمرارية والتأريض.</li> <li >تشخيص أعطال التمديدات الكهربائية وتحديد الإجراءات التصحيحية اللازمة لمعالجتها، ومتابعة برامج الصيانة الوقائية.</li> <li >الالتزام بتطبيق إجراءات وتعليمات السلامة والصحة المهنية في جميع مراحل العمل.</li> </ul> <h3 >المؤهلات والخبرات المطلوبة</h3> <ul > <li >خبرة عملية تتراوح بين <strong >سنتين وخمس سنوات</strong> في مجال التمديدات الكهربائية.</li> <li >القدرة على قراءة وفهم المخططات الكهربائية.</li> <li >معرفة جيدة بإجراءات السلامة والصحة المهنية.</li> </ul> <h3 >المهارات الفنية</h3> <ul > <li >مهارة عالية في تحليل المخططات الكهربائية.</li> <li >القدرة على تقدير الاحتياجات الفنية للمشاريع.</li> <li >مهارات تشخيص الأعطال الكهربائية وتحديد حلولها.</li> <li >الخبرة في إجراء فحوصات التمديدات الكهربائية المختلفة.</li> <li >الالتزام بمعايير الجودة والسلامة المهنية.</li> </ul> <h3 >بيئة العمل</h3> <p >يقع مقر العمل لهذه الوظيفة بدوام كامل في المدينة المنورة، ضمن فريق شركة محمد عبدالعزيز عبدالرحمن المديهش للحديد.</p> <h3 >التقديم</h3> <p >ندعو المهتمين ممن يمتلكون المؤهلات والخبرات المطلوبة للتقدم لهذه الفرصة في شركة محمد عبدالعزيز عبدالرحمن المديهش للحديد.</p></div>

<div dir="rtl"><h3 >نبذة عن الدور</h3> <p >تعلن شركة نبني عن حاجتها لتوظيف <strong >فني كهربائي تمديدات كهربائية</strong> للانضمام إلى فريقها في المدينة المنورة. يتولى شاغل هذا الدور، بدوام كامل، مسؤولية دراسة مخططات التمديدات الكهربائية وتقدير كميات المواد والأجهزة وتأمين التجهيزات اللازمة لتنفيذ أعمال التمديدات. كما يشمل الدور متابعة تنفيذ الأعمال الكهربائية وتشخيص أعطالها وتحديد الإجراءات اللازمة لمعالجتها. يتطلب الدور خبرة عملية تتراوح بين <strong >سنتين إلى خمس سنوات</strong> في مجال ذي صلة.</p> <h3 >المهام والمسؤوليات الرئيسية</h3> <ul > <li >دراسة وتحليل مخططات التمديدات الكهربائية لمختلف القطاعات، بما في ذلك التمديدات المنزلية والصناعية والتجارية ومكوناتها.</li> <li >تقدير كميات المواد والأجهزة الكهربائية المطلوبة، وتأمين التجهيزات اللازمة لتنفيذ أعمال التمديدات مع ضمان مطابقتها للمواصفات الفنية.</li> <li >متابعة تنفيذ أعمال التمديدات الكهربائية، ومراقبة تشغيل دارات التمديدات، وإجراء الفحوصات اللازمة مثل فحوص العازلية والاستمرارية والتأريض.</li> <li >تشخيص أعطال التمديدات الكهربائية وتحديد الإجراءات التصحيحية اللازمة لمعالجتها، بالإضافة إلى متابعة أعمال الصيانة الوقائية.</li> <li >الالتزام بتطبيق جميع إجراءات وتعليمات السلامة والصحة المهنية في بيئة العمل.</li> </ul> <h3 >المؤهلات والخبرات المطلوبة</h3> <ul > <li >خبرة عملية تتراوح بين <strong >سنتين إلى خمس سنوات</strong> في مجال التمديدات الكهربائية.</li> <li >القدرة على قراءة وفهم المخططات الكهربائية بكفاءة.</li> <li >معرفة قوية بأنظمة التمديدات الكهربائية المنزلية والصناعية والتجارية.</li> </ul> <h3 >المهارات والكفاءات</h3> <ul > <li >مهارات تحليلية وتشخيصية لتحديد أعطال التمديدات الكهربائية بدقة.</li> <li >القدرة على تقدير المواد والتجهيزات المطلوبة للمشاريع بفعالية.</li> <li >الالتزام الصارم بمعايير السلامة والصحة المهنية.</li> <li >مهارات متابعة وتنفيذ الأعمال الفنية بكفاءة.</li> </ul> <h3 >تفاصيل العمل والموقع</h3> <p >هذا الدور متاح بنظام <strong >الدوام الكامل</strong> في <strong >المدينة المنورة</strong>. سيتم تحديد الراتب بناءً على الخبرة والمؤهلات بعد المقابلة.</p> <h3 >للتقديم</h3> <p >ندعو المهتمين ممن تنطبق عليهم المتطلبات المذكورة أعلاه للتقديم على هذا الدور.</p></div>

<div dir="rtl"><h3 >نبذة عن الدور</h3> <p >تبحث شركة نبني عن <strong >فني صيانة إنشاءات</strong> للانضمام إلى فريقها في المدينة المنورة. يهدف هذا الدور بدوام كامل إلى ضمان جودة وسلامة الإنشاءات من خلال عمليات الصيانة الدورية والتصحيحية. يتطلب الدور خبرة عملية تتراوح بين سنتين وخمس سنوات في مجال صيانة الإنشاءات.</p> <h3 >الهدف من الوظيفة</h3> <p >يتمثل الهدف الأساسي لهذه الوظيفة في تفقد الإنشاءات لتحديد احتياجات الصيانة، ووضع الخطط اللازمة لتنفيذها بفعالية. يشمل ذلك تقدير الموارد المطلوبة من مواد وعمالة وتجهيزات، بالإضافة إلى متابعة سير العمل لضمان الالتزام بالمعايير والجودة المطلوبة.</p> <h3 >المهام والمسؤوليات الرئيسية</h3> <ul > <li >تفقد الإنشاءات بشكل دوري لتحديد متطلبات الصيانة وجمع البيانات والمعلومات اللازمة عن طبيعة المباني وأعمال الصيانة المطلوبة.</li> <li >تقدير كمية وتكلفة المواد والمستلزمات، بالإضافة إلى العمالة والتجهيزات الضرورية لأعمال الصيانة، وإعداد خطة عمل مفصلة.</li> <li >إعداد وتقديم تقارير فنية للمهندس المشرف أو صاحب العمل، توضح طبيعة أعمال الصيانة المقترحة، وبرنامج العمل، والتكاليف التقديرية.</li> <li >متابعة تنفيذ إجراءات الصيانة لضمان مطابقتها للمواصفات الفنية ومعايير الجودة المحددة.</li> <li >إعداد وتوثيق وحفظ تقارير العمل المتعلقة بجميع أنشطة الصيانة المنجزة.</li> </ul> <h3 >المؤهلات والخبرات المطلوبة</h3> <ul > <li >خبرة عملية تتراوح بين <strong >سنتين إلى خمس سنوات</strong> في مجال صيانة الإنشاءات.</li> <li >القدرة على تفقد الإنشاءات وتحديد احتياجات الصيانة بدقة.</li> <li >مهارات جيدة في تقدير التكاليف والموارد اللازمة للمشاريع.</li> <li >القدرة على إعداد التقارير الفنية ومتابعة سير العمل.</li> </ul> <h3 >موقع العمل ونوع التوظيف</h3> <p >يقع مقر العمل لهذه الوظيفة في <strong >المدينة المنورة</strong>، المملكة العربية السعودية. الوظيفة بدوام كامل، وتتطلب التواجد في الموقع لتنفيذ المهام الموكلة.</p> <h3 >معلومات إضافية</h3> <p >الراتب لهذه الوظيفة <strong >غير معلن</strong> وسيتم تحديده بناءً على الخبرة والمؤهلات خلال عملية المقابلة. ندعو المهتمين الذين يستوفون المتطلبات للتقديم.</p></div>

<div dir="rtl"><h3 >نبذة عن الدور</h3> <p >تبحث مؤسسة عيني عينك للنظارات عن <strong >فني بصريات طبية</strong> للانضمام إلى فريقها المتخصص في المدينة المنورة. يمثل هذا الدور فرصة للمتخصصين ذوي الخبرة الحديثة أو حديثي التخرج للمساهمة في تقديم خدمات بصرية عالية الجودة. سيعمل شاغل الوظيفة بدوام كامل، متولياً مسؤولية تجهيز وتركيب البصريات الطبية، وتقديم الدعم اللازم للعملاء، وصيانة النظارات، مما يضمن رضا المرضى ودقة الخدمات المقدمة.</p> <h3 >ملخص المهام</h3> <p >يتمحور الدور بشكل أساسي حول تنفيذ الإجراءات الفنية المتعلقة بالبصريات الطبية. يشمل ذلك دراسة طلبات ووصفات تصنيع البصريات الطبية بدقة، وتجهيز العدسات الطبية والعدسات اللاصقة وفقاً للمواصفات المطلوبة. كما يتضمن الدور تدريب الأفراد على الاستخدام الأمثل لهذه البصريات والعناية بها، بالإضافة إلى مهام صيانة البصريات الحالية وإعداد التقارير الفنية الدورية لتوثيق سير العمل.</p> <h3 >المسؤوليات الرئيسية</h3> <ul > <li >دراسة طلبات تصنيع البصريات الطبية وتحديد المواصفات المطلوبة، وأخذ قياسات وجه المريض الأساسية لتجهيز النظارات الطبية أو العدسات اللاصقة وتفصيلها.</li> <li >اختيار زجاج العدسات الطبية بالتشاور مع المريض أو بناءً على توصية الطبيب المعالج، وتجهيزها، ثم اختيار الإطارات وتركيب العدسات عليها ومعايرتها.</li> <li >تدريب المرضى على الاستخدام الصحيح للنظارات الطبية أو العدسات اللاصقة وكيفية حمايتها والعناية بها.</li> <li >إعادة تركيب العدسات للنظارات الطبية القديمة وصيانة إطاراتها لضمان استمرارية عملها.</li> <li >إعداد وتقديم تقارير العمل الدورية، وتوثيقها وحفظها بشكل منظم.</li> </ul> <h3 >المؤهلات والخبرات</h3> <ul > <li >خبرة عملية تتراوح من <strong >0 إلى 1 سنة</strong> في مجال البصريات الطبية أو مجال ذي صلة.</li> <li >القدرة على فهم وصفات البصريات الطبية وتطبيقها بدقة.</li> <li >مهارات تواصل جيدة للتعامل مع المرضى وتقديم الإرشادات.</li> </ul> <h3 >تفاصيل الوظيفة</h3> <ul > <li >نوع العمل: <strong >دوام كامل</strong>.</li> <li >الراتب: <strong >5500 ريال سعودي شهرياً</strong>.</li> <li >الموقع: <strong >المدينة المنورة</strong>.</li> </ul> <h3 >التقديم</h3> <p >ندعو المهتمين ممن تنطبق عليهم المتطلبات المذكورة أعلاه إلى تقديم طلباتهم.</p></div>

<h3 >About the Role</h3> <p >Intermountain Rigging and Heavyhaul is seeking a <strong >Millwright Superintendent</strong> to manage industrial services operations in Medina, Al Madinah. This full-time position is responsible for overseeing all work activities at assigned job sites, ensuring safe, profitable, and efficient day-to-day operations. The Superintendent reports directly to the Millwright Industrial Manager and is accountable for the successful execution of projects.</p> <h3 >Leadership and Team Management</h3> <p >The Millwright Superintendent plays a central role in guiding project teams and fostering a collaborative work environment. This involves direct supervision and mentorship of foremen, leadmen, craft laborers, and apprentices to ensure successful project conclusion. The Superintendent determines work priorities, coordinates activities, and assigns tasks based on employee abilities and specialized training. Regular communication with management is essential to promote effective team building across all job assignments.</p> <h3 >Operational Oversight and Project Execution</h3> <ul > <li >Meet with customers and owners to conduct job discovery walks, discuss problem-solving solutions, and address constructability issues.</li> <li >Present all required documents efficiently, including timecards, inspection reports, bills of lading, QC articles, and "as built" drawings.</li> <li >Assume the role of a Project Manager for smaller jobs without an assigned PM.</li> <li >Assist the Project Manager by planning day-to-day activities and verifying the efficient use of all job-specific resources.</li> <li >Organize scheduled meetings, review project documents, and demonstrate a strong understanding of purchase orders, contracts, specifications, and blueprints.</li> <li >Effectively communicate with Project Managers and Project Engineers to promote teamwork and efficient job flow.</li> <li >Deal with individuals, owners, customers, subcontractors, or agencies to gather information, services, or additional resource needs.</li> <li >Control the progress of work within agreed timelines and schedule demands, assisting in setting schedules and overseeing daily site operations.</li> <li >Estimate material, resources, and labor for specific jobs.</li> </ul> <h3 >Safety, Quality, and Development</h3> <ul > <li >Actively participate in Quality Control (QC) and Safety audits, and disseminate information from the Safety team.</li> <li >Mentor employees and recommend specific job training opportunities, ensuring all personnel are site-specific safety trained.</li> <li >Promote team spirit, resolve conflicts, and ensure adherence to all company policies.</li> <li >Maintain a strong leadership presence primarily at job sites.</li> </ul> <h3 >Qualifications and Experience</h3> <ul > <li >A minimum of <strong >5 to 10 years</strong> of experience in a relevant industrial services or millwright field.</li> <li >Demonstrated strong leadership characteristics and a proven ability to manage industrial service operations.</li> <li >Proficiency in planning, organizing, and controlling work activities.</li> <li >Strong communication and interpersonal skills for effective interaction with teams, customers, and management.</li> <li >Ability to understand and interpret project documents, including purchase orders, contracts, specifications, and blueprints.</li> </ul> <h3 >Application Process</h3> <p >Candidates meeting the above qualifications are encouraged to apply for this full-time position with Intermountain Rigging and Heavyhaul.</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph">We ll look to you for:<br>•<br>Performing scheduled maintenance checks and services to ensure equipment operates safely and efficiently,<br>•<br>Responding promptly to breakdowns and technical issues that occur on the rail network,<br>•<br>Collaborating with engineering teams to improve maintenance procedures and standards,<br>•<br>Adhering to safety regulations and company policies at all times,<br>•<br>Contributing to cross-functional projects and initiatives within the engineering department"<br>All about you<br>We value passion and attitude over experience. That s why we don t expect you to have every single skill. Instead, we ve listed some that we think will help you succeed and grow in this role:<br>•<br>Degree in Mechanical Engineering, Electrical Engineering, or a related technical field,<br>•<br>Knowledge of safety standards and regulations in a maintenance environment,<br>•<br>Capacity to read and interpret technical diagrams and schematics,<br>•<br>Adaptability to work in various conditions and shift patterns<br>Things you ll enjoy<br>Join us on a life-long transformative journey the rail industry is here to stay, so you can grow and develop new skills and experiences throughout your career. You ll also:<br>•<br>Collaborate with transverse teams and helpful colleagues,<br>•<br>Utilise our dynamic and innovative working environment,<br>•<br>Benefit from our investment in your development, through award-winning learning<br>You don t need to be a train enthusiast to thrive with us. We guarantee that when you step onto one of our trains with your friends or family, you ll be proud. If you re up for the challenge, we d love to hear from you!<br>Important to note<br>As a global business, we re an equal-opportunity employer that celebrates diversity across the 63 countries we operate in. We re committed to creating an inclusive workplace for everyone.<br>Job Type: Internship/Apprenticeship<br>Job Segment:<br>Quality Assurance, Intern, Technician, Trainee, Technology, Entry Level<br></div></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Purpose: The assistant technician provides support to technicians in the maintenance, repair, and installation of various equipment, Appliances, Air Conditions, and products. Responsibilities: Assist in maintaining and repairing equipment, Appliances, Air conditioning, and Home appliances products. Organize routine inspections and perform preventive maintenance tasks. Troubleshoot equipment malfunctions and implement solutions under the guidance of technicians. Support other team members as needed. Document all maintenance and repair activities accurately for record-keeping purposes. Collaborate with other team members and departments to schedule maintenance tasks. Ensure customer satisfaction by completing jobs effectively. Maintain inventory of necessary tools, consumables, and spares in the service vehicle. Drive to different locations for installations, maintenance, or repairs as needed. Strictly adhere to prescribed safety practices &amp; utilize appropriate Personal Protective Equipment provided. Adhere strictly to all established safety protocols and guidelines to ensure a safe and compliant working environment. Perform additional duties assigned by supervisors or technicians. Maintain good relationships with customers through professional behavior, performance, and keep excellent hygiene.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Technical, AC &amp; Refrigeration Engineering, Electrical, Mechanical Diploma or Certification from a recognized institution.</li><li>Previous experience in a technical or mechanical role is preferred.</li><li>Strong problem-solving skills and attention to detail.</li><li>Ability to lift heavy objects and work in various weather conditions.</li><li>Valid driver's license and clean driving record, as the role involves driving to different locations for installations, maintenance, or repairs.</li><li>Effective communication skills, both verbal and written.</li><li>Willingness to undergo additional training and certifications as needed.</li></ul><p></p></section>

<h3 >About Tronox and the Role</h3> <p >Tronox is a global leader in the vertically integrated manufacturing of titanium dioxide (TiO2) pigment and other materials that add brightness and durability to products encountered daily. With 5,700 employees across six continents, the company operates unified by strong values and a vision to shape a sustainable, thriving world through enriched and refined minerals. We are seeking a <strong >Learning &amp; Development Specialist</strong> to join our team in Yanbu, Al Madinah, Saudi Arabia, on a full-time basis.</p> <h3 >Role Purpose</h3> <p >The Learning &amp; Development Specialist is responsible for developing, implementing, and continuously improving the competency assurance system specifically for Maintenance personnel. This is achieved through structured classroom learning, practical workshops, simulation, coaching, and structured On-the-Job Training (OJT). The role supports safe, reliable, environmentally responsible, and efficient plant operations by identifying competency gaps, conducting Training Needs Analysis (TNA), developing competency-based learning programs, facilitating technical training, and conducting competency assessments. The position partners closely with Maintenance, Operations, Engineering, Reliability, Process Safety, HSE, HR, and Subject Matter Experts (SMEs) to ensure employees possess the required technical competencies to perform their work safely, effectively, and in compliance with Tronox standards.</p> <h3 >Key Responsibilities</h3> <ul > <li >Deliver classroom, practical workshop, field coaching, and structured OJT programs.</li> <li >Conduct Training Needs Analysis (TNA) with department leaders and identify competency gaps using various data sources such as competency matrices, performance data, incident learnings, audits, and business requirements.</li> <li >Develop and continuously improve competency-based training curricula, including CETP, JRTP, OJT, qualification pathways, and technical development programs.</li> <li >Design structured learning pathways for new hires, experienced employees, multi-skilled personnel, and succession planning initiatives.</li> <li >Develop technical training manuals, presentations, SOP learning guides, assessment packages, and reference materials.</li> <li >Convert operational procedures, maintenance work instructions, OEM manuals, and engineering standards into effective learning materials.</li> <li >Collaborate with SMEs in developing technical learning content and blended learning solutions, including instructor-led, digital, self-paced, and workplace learning resources.</li> </ul> <h3 >Competency Assessment and Learning Administration</h3> <ul > <li >Conduct theoretical and practical competency assessments, developing written examinations, practical assessment checklists, and question banks.</li> <li >Verify employee competence against defined competency standards before qualification or authorization, and support periodic competency reassessment and reauthorization programs.</li> <li >Maintain employee learning records, competency matrices, qualification status, and training history.</li> <li >Prepare monthly competency reports and updates, ensuring compliance with LMS requirements and document control standards.</li> <li >Coordinate annual plans and monthly training calendars with stakeholders.</li> </ul> <h3 >Continuous Improvement and Safety Compliance</h3> <ul > <li >Evaluate training effectiveness using learner feedback, assessment results, workplace observations, and operational performance, recommending improvements to competency programs.</li> <li >Participate in capability improvement initiatives.</li> <li >Ensure all learning programs comply with Tronox Safety Standards, Process Safety Management (PSM), environmental requirements, and company procedures.</li> <li >Promote Human Performance principles, Learning from Events, and Safe Work Practices.</li> <li >Support competency requirements associated with Permit to Work, Isolation, Critical Risk Management, and Life Saving Rules.</li> </ul> <h3 >Required Experience</h3> <p >Candidates for this full-time position should possess <strong >5-10 years of relevant experience</strong> in learning and development, particularly within an industrial or manufacturing context, with a focus on technical competency assurance.</p>

<h3 >About the Role</h3> <p >Catrion Group is seeking a <strong >Coordinator, TIC</strong> to join our team in Medina. This full-time position is designed for individuals with 0-1 years of experience, providing essential administrative and coordination support to our technical operations. The role is crucial for ensuring the efficient flow of technical requests, meticulous documentation, and adherence to administrative processes within the department.</p> <h3 >Role Purpose and Contribution</h3> <p >The TIC Coordinator will play a vital role in supporting the Technical Department by managing a diverse range of operational and administrative tasks. This position is central to maintaining organized records, facilitating effective communication, and ensuring compliance with established procedures and standards, thereby directly contributing to the overall efficiency of technical services and support functions.</p> <h3 >Key Responsibilities</h3> <ul > <li >Process all incoming Technical Requests within the ERP system and generate Work Orders for relevant sections.</li> <li >Ensure that all PM Work Orders are printed and distributed to concerned Supervisors according to the weekly schedule.</li> <li >Collect and close all completed PM and TR (Work Order) forms from all sections.</li> <li >Coordinate with customers to address their daily maintenance requests.</li> <li >Record and process Equipment BER, EDA, and FATA Forms for SCV and IAP equipment/machines.</li> <li >Receive and process New Equipment Receiving Forms, accurately inputting data into the CMMS.</li> <li >Initiate and process Travel Orders, Recruitment requests, and Investment applications (** as required.</li> <li >Consolidate and provide feedback on Daily Hygiene Reports for submission to Quality Control (QC).</li> <li >Review and update all MMS records and related files, including equipment location and cost user department.</li> </ul> <h3 >Administrative and Documentation Management</h3> <ul > <li >Manage the filing, control, and maintenance of all technical-related documents and the Technical Library.</li> <li >Oversee and update the section's administrative matters, including Ramp passes, vacation updates, staff lists, TAS, and staff evaluations, in line with ISO standard requirements.</li> <li >Receive and entertain visitors in accordance with established office protocols.</li> <li >Ensure timely preparation, submission, and follow-up of all required documentation, such as Monthly Reports and Employee of the Month nominations.</li> <li >Annually update Job Descriptions and ensure that staff evaluation forms are completed as per schedule and existing procedures.</li> <li >Update the Technical Bulletin Board upon receiving new newsletters and notices for any outages.</li> <li >Maintain the stock of stationary supplies for the Technical Department and assist the Engineer (TIC) in controlling requisitions to minimize costs and ensure proper utilization.</li> <li >Dispose of all closed PM/RN Work Orders that are older than twelve (12) months.</li> </ul> <h3 >Qualifications and Experience</h3> <ul > <li >A minimum of 0-1 years of relevant experience in an administrative or coordination role.</li> <li >Demonstrated proficiency in using ERP systems and CMMS for data entry and work order management.</li> <li >Strong organizational skills with meticulous attention to detail for document control and record-keeping.</li> <li >Effective communication and coordination abilities for interacting with internal teams and external customers.</li> <li >Familiarity with ISO standard requirements for administrative processes is advantageous.</li> </ul> <h3 >Reporting Structure</h3> <p >The Coordinator, TIC will report directly to the Engineer (TIC) and will undertake other duties as assigned to support the department's operational objectives.</p>

<p>In a world of possibilities, pursue one with endless opportunities. Imagine Next! At Parsons, you can imagine a career where you thrive, work with exceptional people, and be yourself. Guided by our leadership vision of valuing people, embracing agility, and fostering growth, we cultivate an innovative culture that empowers you to achieve your full potential. Unleash your talent and redefine what s possible.</p><p>Parsons is looking for an amazingly talented Principal Supervising Engineer - Civil to join our team! In this role you will get to lead the Civil Engineering Discipline group within the Technical Support Section within the Engineering Department providing support to all Yanbu projects.</p><p><strong>What You'll Be Doing:</strong></p><ul><li>Plan and perform engineering work as necessary to meet the overall city industrial and community infrastructure development program requirements and standards.</li><li>Manage the engineering discipline team to meet the development program requirements including resource planning, workload prioritization and coordination with other disciplines and departmental sections.</li><li>Provides leadership, guidance and training to lower-level personnel and monitors their performance.</li><li>Review A/E consultant and EPC contractor design drawings, specifications, and calculation submittals; and coordinate the same with the work of other disciplines.</li><li>Provide technical advice to other sections and departments within the Royal Commission including participation in meetings and workshops as required.</li><li>Prepare proposals for design work including scope of work, design concepts, sketches and costs estimates for labor, equipment, and materials.</li><li>Prepare and update technical specifications, guidelines, and standard drawings in coordination with other disciplines.</li><li>Provide technical assistance during pre-bid conferences, proposal evaluations, and post-award or other contract conferences and value engineering.</li><li>Actively participates in value engineering and constructability workshops</li><li>Process submittals/substitution requests during construction and address RFI's.</li><li>Review vendor and shop drawings and construction materials.</li><li>Assist in resolving clashes and conflicts between services.</li><li>Perform field inspections and provide professional field support and construction trouble shooting as necessary during construction phases.</li><li>Preparation and presentation of technical correspondence, reports, and studies.</li><li>Functions as a technical expert in performing analyses in specialized areas.</li><li>Reviews and provides guidance in problem areas, recommends solutions, alternatives, and improvements.</li><li>Preparation and presentation of technical correspondence, reports, and studies.</li></ul><p><strong>Desired Candidate Profile</strong></p><p><strong>What Required Skills You'll Bring:</strong></p><ul><li>Bachelor's Degree in Civil Engineering or a related subject</li><li>Minimum of 10 years of experience working in an engineering design environment, with at least 5 years as a team lead or supervisor working on the design of large scale industrial, commercial, and residential infrastructure projects.</li><li>Previous experience of working in the Middle East and knowledge of Saudi Building Code (SBC Codes) regulations will be considered an advantage.</li><li>Possess comprehensive design and construction support experience in site development, site grading, roads, and wet utilities (water, sanitary, sewage etc.) for large residential, industrial, and commercial areas.</li><li>Registration in Country of Origin in an Engineering Professional Association equivalent to US PE or UK Chartered Engineer status is essential.</li><li>Experience in the development of hydraulic network models e.g. SewerGEMS and WaterGEMS, including model calibration and interpretation of results.</li><li>A proven record of technical and administrative ability in design management including the ability to communicate effectively in spoken and written English is essential.</li></ul><p><strong>What Desired Skills You'll Bring:</strong></p><ul><li>Demonstrable experience in the application of North American and international codes and standards.</li><li>Experience of BIM processes and procedures in accordance with ISO 19650 or the US National BIM Standards will be considered an advantage.</li></ul>

<p>Eram Talent, a leading talent acquisition company in the Oil &amp; Energy sector, We are seeking an experienced Process Engineer (Refinery) to be stationed at YASREF refinery. The ideal candidate will provide on-site technical support, troubleshooting, and optimization for refinery process units, ensuring safe, efficient, and reliable operations. Key Responsibilities Provide expert-level process engineering support for refinery operations. Monitor plant performance and recommend improvements to optimize efficiency, reliability, and safety. Troubleshoot operational issues and provide immediate technical solutions. Support plant modifications, debottlenecking, and process optimization initiatives. Review and validate process design, simulation, and operational data. Coordinate with operations, maintenance, and technical teams to resolve process-related challenges. Ensure compliance with safety standards, environmental regulations, and company procedures. Participate in shutdowns, startups, and commissioning activities when required.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor s Degree in Chemical Engineering or related field.</li><li>Minimum 10+ years of experience in refinery process engineering roles.</li><li>Strong experience in refinery operations and technical support.</li><li>Technical Expertise (Mandatory) Must have experience in at least one of the following refinery process units: Two Stage Hydrocracking LPG Olefin Saturation Mercaptan Removal Delayed Coking OR strong experience in the following areas: Refinery Process Simulation Relief Load &amp; Flare System Analysis Process Hydraulics Calculations Fired Heaters Design &amp; Operation Refinery Real-Time Optimization (RTO)</li><li>Required Skills Strong analytical and problem-solving abilities. Expertise in process simulation tools (e.g., Aspen HYSYS, UniSim). In-depth understanding of refinery operations and safety standards. Excellent communication and coordination skills. Ability to work in a fast-paced operational environment.</li></ul>