Packing & Packaging Technician Jobs in Saudi

<p>Performs aircraft maintenance, component servicing and Bay support activities to the T-21 Aircraft Egress Systems. Provides On the Job Training (OJT) function and Production Inspections. Troubleshoots, inspects, removes installs, repairs, modifies, and operates all Egress related aircraft systems, components and associated support and test equipment.</p><p>JOB ACCOUNTABILITIES</p><p>Maintaining good engineering practice and compliance with RSAF Technical Orders in all aspects of the Egress Maintenance Shop</p><p>Prepare items for calibration within his work area</p><p>Carry out TCTO s and Special inspections when directed</p><p>Have a thorough knowledge of Aircraft Safety devices and Aircraft operating areas</p><p>Ensure compliance with tool control and the KFAA SAFO program</p><p>Support deployments to other bases within and out of KSA when required and be able to prepare equipment to support these deployments</p><p>Act as MIIP on any aircraft or ground support technical related issues</p><p>To provide technical activities in support of KFAA mission statement and aircraft servicing programmes through carrying out Workshop support equipment: servicing, fault troubleshooting / rectification, modifications, inspections / evaluations of components / test / support equipment at the Intermediate level maintenance.</p><p>To provide technical specialty support in the: evaluation, interpretation, determinations of requisite corrective actions, performance and operational status of specialty specific aircraft systems, components, test support equipment at the Intermediate level maintenance.</p><p>To provide informal and formal On the Job Training (OJT) for both RSAF and BAE Systems Saudi National personnel to enable either RSAF or civilian Saudisation of PC21 Intermediate Maintenance operations.</p><p>To obtain and maintain certifications so as to support speciality and aircraft maintenance functions.</p><p>Able to acquire user expertise and become conversant with the RSAF aircraft data management and tracking computer system MIRO Gold.</p><p>Able to understand and comply with the RSAF FOD and Safety Programme.</p><p><strong>Desired Candidate Profile</strong></p><h2>RECRUITMENT SPECIFICATION</h2><p>Essential:</p><ul><li>A recognised qualification to NVQ3/ONC/OND/BTEC level in a relevant technical discipline, or a technical apprenticeship, or suitable equivalent technical qualification acceptable to M&amp;CA,</li><li>Will be able to demonstrate experience in aircraft maintenance and engineering.</li><li>Have substantial post qualification practical maintenance experience within operational flying aircraft environment supported by formal recorded workplace applied related training OR on same aircraft type OR successful completion of BAESSA apprenticeship programme (SNTTP/ TSNTTP).</li><li>Have completed a PC21 Aircraft Systems Training courses or similar appropriate to specialties.</li><li>Must have and be able to demonstrate sound oral and written two-way communication skills with the ability to be tactful, discreet and confident in dealing with people at all levels</li><li>Be able to work in close harmony in a mixed EE/SN workforce</li><li>Must have an understanding and application of human factors, error management, health &amp; safety and proactive hazard analysis, appropriate to the role.</li><li>The successful candidate, Saudi or Expatriate must obtain Saudi Council of Engineers (SCE) membership at the appropriate level, prior to starting the new role or commencing employment in KSA. SCE membership must be maintained throughout their employment in this role.</li></ul><p>Desirable:</p><ul><li>A sound understanding of the RSAF 4-1-7166 series and supporting technical publications applicable to his work area</li><li>An understanding of the RSAF Operation and working practices</li><li>Working knowledge of Q-pulse, DMS and an understanding of M&amp;CA processes.</li><li>Must be able to work on his own initiative to resolve complex technical issues</li><li>Must be computer literate with a sound understanding of the Microsoft Office Suite</li></ul>

<p>Maintains service operations by inspecting and maintaining vehicles. Main duties include using tools to find any potential issues with someone s vehicle, explains problems with the car to the driver and performing maintenance on the car to fix it or prevent it from future breakdowns or issues.</p><p>Ensure that the job card is issued with details of the repair work to be carried out. Ensures that protective covers are used in all vehicles before carrying out any repairs. Should maintain accurate time recording (clocking on and off) for all repairs.</p><p>Perform brakes, suspension, tire installation, scheduled maintenance, and all manner of automotive repairs and maintenance that you are qualified to perform Secure our guest's approval to perform the work because of the diagnosis, and always maintain a clean, neat work area Complete thorough automotive vehicle inspections on every vehicle you service, and perform any repairs and maintenance Test drive guest vehicles and use our shop truck in a safe manner to pick up inventory as needed Repair brake and steering systems. Diagnose and repair electrical and electronic systems. Replace or repair transmissions and fuel components as needed. Repair cooling components and the system, including air conditioners and engine cooling. Perform emissions inspections, safety checks, and similar state-regulated vehicle examinations. Maintain a clean, safe working environment. Produce legible and accurate paperwork reflecting work performed. Identify problems with vehicles using the diagnostic equipment. Explain automotive repairs and issues, and provide great customer service. Perform basic auto care and maintenance tasks such as oil changes, fluid level checks, and tire rotation. Repair and replace brake pads, wheel bearings, sensors, and other parts. Perform routine maintenance and general mechanic work on vehicles. Prepared to get additional certification as needed. Willingness to learn with hands-on training. Help keep the repair shop clean and organized. Keep a professional appearance.</p><p><strong>Desired Candidate Profile</strong></p><p>KeyRequirements</p><ul><li>Ensure that the job card is issued with details of the repair work to be carried out.</li><li>Ensures that protective covers are used in all vehicles before carrying out any repairs.</li><li>Should maintain accurate time recording (clocking on and off) for all repairs.</li><li>Perform brakes, suspension, tire installation, scheduled maintenance, and all manner of automotive repairs and maintenance that you are qualified to perform</li><li>Secure our guest's approval to perform the work because of the diagnosis, and always maintain a clean, neat work area</li><li>Complete thorough automotive vehicle inspections on every vehicle you service, and perform any repairs and maintenance</li><li>Test drive guest vehicles and use our shop truck in a safe manner to pick up inventory as needed</li><li>Repair brake and steering systems.</li><li>Diagnose and repair electrical and electronic systems.</li><li>Replace or repair transmissions and fuel components as needed.</li><li>Repair cooling components and the system, including air conditioners and engine cooling.</li><li>Perform emissions inspections, safety checks, and similar state-regulated vehicle examinations.</li><li>Maintain a clean, safe working environment.</li><li>Produce legible and accurate paperwork reflecting work performed.</li><li>Identify problems with vehicles using the diagnostic equipment.</li><li>Explain automotive repairs and issues, and provide great customer service.</li><li>Perform basic auto care and maintenance tasks such as oil changes, fluid level checks, and tire rotation.</li><li>Repair and replace brake pads, wheel bearings, sensors, and other parts.</li><li>Perform routine maintenance and general mechanic work on vehicles.</li><li>Prepared to get additional certification as needed.</li><li>Willingness to learn with hands-on training.</li><li>Help keep the repair shop clean and organized.</li><li>Keep a professional appearance.</li></ul>

<p>The Field Engineer III Managed Pressure Drilling (MPD) is responsible for planning, executing, and optimizing Managed Pressure Drilling operations at customer well sites. The role provides advanced engineering expertise, operational leadership, and technical support to ensure safe, efficient, and reliable drilling performance while meeting customer expectations, company standards, and regulatory requirements. Working closely with customers, drilling contractors, and internal teams, the Field Engineer III serves as the primary engineering resource for complex onshore and offshore MPD projects.</p><p><b><br></b></p><p><b>Responsibilities:</b></p><ul><li>Lead the execution of Managed Pressure Drilling (MPD) operations in accordance with approved engineering programs, operational procedures, and HSE standards.</li><li>Provide real-time engineering support during drilling, tripping, casing running, cementing, and other well construction activities requiring MPD.</li><li>Monitor, analyze, and optimize drilling parameters, hydraulic performance, and pressure data to maintain wellbore pressure control.</li><li>Operate and oversee automated MPD control systems to maintain target bottom-hole pressure throughout drilling operations.</li><li>Develop engineering recommendations and operational adjustments based on real-time well conditions and technical analysis.</li><li>Support pre-job planning, hazard identification, risk assessments, and technical reviews with customers and internal stakeholders.</li><li>Supervise the rig-up, pressure testing, commissioning, troubleshooting, maintenance, and rig-down of MPD equipment.</li><li>Coordinate field activities with drilling supervisors, company representatives, rig personnel, and service providers to ensure seamless operations.</li><li>Investigate operational issues and equipment failures, perform root cause analysis, and implement corrective and preventive actions.</li><li>Prepare accurate daily operational reports, engineering analyses, end-of-well reports, and lessons learned documentation.</li><li>Ensure compliance with company HSE policies, customer requirements, API standards, and industry best practices.</li><li>Mentor and provide technical guidance to junior Field Engineers and Field Specialists.</li><li>Support equipment commissioning, new technology implementation, inventory management, and continuous improvement initiatives.</li><li>Maintain equipment readiness and support mobilization planning for upcoming projects.</li><li>Build and maintain strong customer relationships by delivering high-quality technical support and operational excellence.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Strong knowledge of Managed Pressure Drilling (MPD) technologies, equipment, and operational applications.</li><li>Thorough understanding of well control principles, drilling hydraulics, and surface back-pressure management.</li><li>Experience with Rotating Control Devices (RCD), MPD choke systems, Coriolis flow measurement systems, and automated MPD control systems.</li><li>Proficiency in hydraulic modeling, pressure analysis, and interpretation of real-time drilling data.</li><li>Ability to troubleshoot mechanical, hydraulic, electrical, instrumentation, and operational issues under demanding field conditions.</li><li>Knowledge of drilling data acquisition systems and digital drilling technologies.</li><li>Technical leadership and engineering decision-making.</li><li>Strong analytical and problem-solving capabilities.</li><li>Excellent communication, reporting, and customer engagement skills.</li><li>Project planning and operational coordination.</li><li>Risk assessment and mitigation.</li><li>Team leadership, mentoring, and coaching.</li><li>Strong commitment to HSE, quality, and operational excellence.</li><li>Ability to work effectively in high-pressure, remote, and rotational field environments.</li><li>Bachelor's degree in Petroleum Engineering, Mechanical Engineering, Chemical Engineering, or a related engineering discipline.</li><li>Minimum 7 years of oil and gas drilling experience, including at least 5 years in Managed Pressure Drilling (MPD) operations.</li><li>Demonstrated experience supporting complex onshore and offshore MPD projects.</li><li>Willingness to travel internationally and work rotational assignments in remote locations.</li><li>IWCF or IADC Well Control Certification (Supervisor Level).</li><li>Experience in HPHT, deepwater, extended-reach, depleted reservoir, and narrow-margin drilling environments.</li><li>Knowledge of Constant Bottom Hole Pressure (CBHP), Pressurized Mud Cap Drilling (PMCD), Mud Cap Drilling (MCD), and Managed Pressure Cementing.</li><li>H S, First Aid/CPR, BOSIET, and offshore survival certifications (as applicable).</li></ul>

Key Responsibilities Perform preventive, predictive, and corrective maintenance on instrumentation and control systems. Troubleshoot, diagnose, and repair faults in PLC, SCADA, HMI, RTU, VFD, and field instrumentation systems. Calibrate, test, install, and commission field instruments, including pressure, flow, level, temperature, and analytical instruments. Ensure the reliable and efficient operation of automation and control systems in wastewater treatment plants (WWTPs), pumping stations, and lift stations. Monitor control system performance and identify opportunities to improve system reliability and reduce downtime. Read and interpret P&IDs, electrical drawings, loop diagrams, control logic, and technical documentation to perform maintenance activities. Conduct routine inspections and functional testing of instrumentation and control equipment. Maintain accurate maintenance records, calibration certificates, and work reports in the computerized maintenance management system (CMMS). Coordinate with operations and maintenance teams to plan and execute maintenance activities with minimal disruption to plant operations. Assist in the installation, modification, and upgrading of instrumentation and control systems. Ensure compliance with company policies, safety procedures, and applicable industry standards during all maintenance activities. Support emergency breakdown response and participate in on-call maintenance activities when required. Identify spare parts requirements and report equipment defects or recurring failures to supervisors. Participate in system testing, commissioning, and performance verification following maintenance or project activities. Maintain housekeeping standards and ensure tools, instruments, and test equipment are properly maintained and calibrated.

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Title:</b></p><br><br>Principal Technical Professional - Electrical<br><br><p>Under general supervision, independently applies advanced engineering techniques, makes decisions on engineering problems and methods, and represents the organization in conferences to resolve important questions or to negotiate with key engineers and officials of other organizations. Provides technical guidance to designers and less experienced engineers and is consulted extensively by associates and others with a high degree of reliance placed on scientific interpretations and advice. Job role is responsible for a measurable asset such as an assigned staff and budget. Skills are typically acquired through an undergraduate degree in Engineering and a minimum of 7 years related experience, with average experience ranging from 10+ years.</p><br><br><br><br><br> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> 8+ years </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

<div dir="rtl"><h3 >نبذة عن الدور</h3> <p >تعلن شركة كران الخليجية للخدمات عن حاجتها لميكانيكي تدفئة وتهوية وتكييف للانضمام إلى فريقها في الجبيل، المنطقة الشرقية. يتولى شاغل هذا الدور بدوام كامل مسؤولية فحص وصيانة وإصلاح أنظمة التدفئة والتهوية وتكييف الهواء لضمان كفاءتها التشغيلية واستمرارية عملها.</p> <h3 >المهام والمسؤوليات الرئيسية</h3> <ul > <li >تركيب مكونات أنظمة التدفئة والتهوية وتكييف الهواء المختلفة.</li> <li >تركيب الأنابيب وتعديلها وربطها بشكل صحيح وفقاً للمواصفات الفنية.</li> <li >إجراء عمليات التفتيش الروتينية كجزء من برامج الصيانة الوقائية، وتحديد أي أضرار أو أعطال في المعدات.</li> <li >إصلاح واستبدال الأجزاء التالفة أو المستهلكة، واختبار المعدات بعد الإصلاح للتأكد من أدائها الأمثل.</li> <li >الاحتفاظ بسجلات دقيقة ومفصلة لخدمات الصيانة والإصلاح التي تتم على المعدات.</li> </ul> <h3 >المؤهلات والخبرات المطلوبة</h3> <ul > <li >خبرة عملية تتراوح بين <strong >2 إلى 5 سنوات</strong> في مجال فحص وصيانة وإصلاح أنظمة التدفئة والتهوية وتكييف الهواء.</li> <li >فهم قوي لمبادئ عمل أنظمة التدفئة والتهوية وتكييف الهواء ومكوناتها المختلفة.</li> <li >القدرة على قراءة وتفسير المخططات الفنية والكتيبات التشغيلية.</li> </ul> <h3 >المهارات الأساسية</h3> <ul > <li >مهارات تشخيص الأعطال وإصلاحها بكفاءة.</li> <li >القدرة على العمل بشكل مستقل وكجزء من فريق.</li> <li >الالتزام بمعايير السلامة المهنية وإجراءات العمل.</li> <li >مهارات جيدة في حفظ السجلات والتوثيق.</li> </ul> <h3 >بيئة العمل</h3> <p >يقع مقر هذا الدور في مدينة الجبيل بالمنطقة الشرقية، وهو وظيفة بدوام كامل ضمن بيئة عمل داعمة في شركة كران الخليجية للخدمات.</p> <h3 >معلومات إضافية</h3> <p >هذه فرصة للانضمام إلى فريق متخصص في مجال الخدمات الفنية. سيتم تحديد الراتب بناءً على الخبرة والمؤهلات خلال عملية التوظيف.</p></div>

<p>Perform routine, preventive, and emergency mechanical maintenance work in accordance with approved policies and procedures. Monitor the performance of production units and ensure they operate within designated operational limits, reporting any observations that may affect equipment efficiency. Identify the tools and equipment required for maintenance, assess their readiness, and carry out preventive maintenance to ensure their continuous availability. Organize and store maintenance tools in their designated locations, maintain them properly, and ensure proper disposal of maintenance waste. Carry out mechanical repair work such as welding, cutting, and refurbishing replaced parts to ensure their readiness and efficiency. Comply with safety procedures before starting work, including verifying the necessary permits and lockout/tagout forms. Perform any other tasks assigned by the direct supervisor.</p><p><strong>Desired Candidate Profile</strong></p><p>Diploma in Mechanical Engineering or any related field.</p>

<ul><li>Oversee daily operations of technical teams, ensuring adherence to project timelines and quality standards.</li><li>Conduct regular performance evaluations and provide constructive feedback to team members to foster professional growth.</li><li>Develop and implement technical training programs to enhance team skills and knowledge across the latest technologies.</li><li>Coordinate with cross-functional teams to resolve technical issues and streamline workflow processes.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Bachelor's degree in Engineering, Computer Science, or a related field, with a strong technical foundation.</p></li><li><p>A minimum of 8 years of relevant work experience in a supervisory role within the technical domain.</p></li><li><p>Certifications such as PMP, Six Sigma, or relevant technical certifications, showcasing commitment to professional development.</p></li><li><p>Experience in a specific industry such as IT, manufacturing, or telecommunications, ensuring familiarity with sector-specific challenges.</p></li></ul>

This position is listed on behalf of a partner company, who manages all applications and next steps. Our partner is looking for a Technical Support Team Lead (Saa S | SQL) based in Saudi Arabia.<br><br>As a Technical Support Team Lead, you’ll lead a team of six technical support specialists responsible for a business-critical Saa S platform operating around the clock. You’ll combine people leadership with deep technical troubleshooting, serving as the primary escalation point before engineering. The role gives you ownership of team performance, support quality, coverage, and operational KPIs. You’ll work closely with engineering to eliminate recurring issues and build tools that allow support specialists to resolve more problems independently. Working across Azure, SQL Server, C#, Angular, and modern AI support tools, you’ll become a key technical authority for the platform and customer base. Reporting directly to senior leadership, you’ll have significant influence over how the support function evolves and performs.<br><br>Accountabilities<br><br>Directly manage and develop a team of six technical support specialists with varying levels of product knowledge and experience. Lead a support function operating across multiple time zones, including participation in mandatory daily team meetings at 8:00 am and 11:00 am Pacific Time. Coach team members, identify skill gaps, and develop capabilities that reduce unnecessary engineering escalations. Review the support ticket queue daily, guide prioritization, and own escalation decisions. Serve as the primary technical escalation point before engineering and determine appropriate ticket severity and priority. Lead major P1 and system-down incidents, coordinating response efforts, communicating with affected customers, and producing root-cause reports after resolution. Resolve escalated issues permanently through controlled support tooling, code fixes, or documented procedures whenever possible. Identify recurring support issues and partner with engineering to address their underlying root causes. Develop deep knowledge of the Saa S platform and customer environment to maximize first-line resolution. Partner with the Engineering Manager to prioritize and justify new support tooling and automation initiatives. Own support KPIs including open tickets, ticket age, backlog aging, First Response Time, Time to Resolution, reopen rate, repeat-escalation rate, and CSAT. Conduct quality assurance and case reviews, evaluating both resolution effectiveness and the quality of ticket documentation. Monitor stalled tickets and ensure specialists maintain appropriate follow-up and ownership. Champion AI-assisted support using tools such as Claude and Codex to improve troubleshooting, productivity, and team enablement. Own support procedures and documentation in Confluence and use quieter periods to strengthen the team's knowledge base. Contribute to occasional after-hours escalation management when genuine major incidents occur.<br><br>Requirements<br><br>10+ years of technical support experience in a Saa S or software environment.5+ years of experience leading or managing technical support teams. Strong hands-on knowledge of the Atlassian ecosystem, particularly Jira, Jira Service Management, and Confluence. Advanced practical experience with Microsoft SQL Server and confident SQL troubleshooting skills. Working knowledge of C#, with the ability to read backend code and reason about potential root causes. Proven experience coaching support specialists, managing performance, and conducting QA and case-quality reviews. Strong understanding of support KPIs and SLAs, including First Response Time, Time to Resolution, backlog aging, reopen rate, repeat-escalation rate, and CSAT. Sound judgment when assessing ticket severity, managing incidents, and determining when engineering escalation is necessary. Strong analytical and troubleshooting skills, with the ability to quickly develop deep knowledge of a complex Saa S platform and its customer base. Comfortable using AI tools to accelerate troubleshooting, documentation, and support enablement. Strong written and spoken English. Self-directed leadership style with the ability to establish clear priorities, expectations, and direction for the team. Ability to work effectively across time zones and collaborate closely with engineering and senior leadership. Familiarity with Git Hub or other source-control systems is a plus. Exposure to Angular is advantageous. French and/or Spanish language skills are a plus. Familiarity with SSO technologies such as SAML or OAuth is beneficial.<br><br>Benefits<br><br>Fully remote position. Leadership responsibility for a six-person technical support team. Significant ownership of a 24/7 Saa S support function and its operational performance. Opportunity to serve as the team's senior technical authority and primary escalation point before engineering. Direct collaboration with engineering to improve tooling, automation, and support processes. Exposure to a Microsoft technology stack including Azure, SQL Server, C#, and Angular. Opportunity to work with modern AI-assisted support tools such as Claude and Codex. Direct visibility and collaboration with senior company leadership. Opportunity to shape support processes, knowledge management, quality standards, and team development. High-impact role focused on improving platform reliability, customer experience, and support efficiency.<br><br>How Jobgether Works<br><br>We use an AI-powered matching process to ensure your application is reviewed quickly, objectively, and fairly against the role's core requirements. Our system identifies the top-fitting candidates, and this shortlist is then shared directly with the hiring company. The final decision and next steps (interviews, assessments) are managed by their internal team.<br><br>We appreciate your interest and wish you the best!<br><br> Why Apply Through Jobgether?<br><br>Data Privacy Notice: By submitting your application, you acknowledge that Jobgether will process your personal data to evaluate your candidacy and share relevant information with the hiring employer. This processing is based on legitimate interest and pre-contractual measures under applicable data protection laws (including GDPR). You may exercise your rights (access, rectification, erasure, objection) at any time.<br><br>We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

<p>POSITION SUMMARY Respond and attend to guest repair requests. Communicate with guests/customers to resolve maintenance issues with little to no supervision. Perform preventive maintenance on tools and equipment, including cleaning and lubrication. Visually inspect tools, equipment, or machines. Carry equipment (e.g., tools, radio). Identify, locate, and operate all shut-off valves for equipment. Maintain maintenance inventory and requisition parts and supplies as needed. Assure each day s activities and problems that occur are communicated to the other shifts using approved communication programs and standards. Display advanced ability to read standard blue prints and electrical schematics concerning plumbing and HVAC. Display above average engineering operations skills and strong general mechanical ability. Display proficiency in at least three of the following categories, above average skills in three more of the following categories and basic skills in the remaining categories: air conditioning and refrigeration, electrical, mechanical, plumbing, pneumatic/electronic systems and controls, carpentry and finish skills, kitchen equipment, vehicles, energy conservation, and/or general building management. Display solid knowledge and skill in the safe use of hand and power tools and other materials required to perform repair and maintenance tasks. Safely perform highly complex repairs of the physical property, electrical, plumbing and mechanical equipment, air conditioners, refrigeration and pool heaters - ensuring all methods, materials and practices meet company standards and Local and National codes - with little or no supervision. Troubleshoot and perform repairs on all types of equipment (e.g., pump and motor replacement), plumbing (e.g., plunge toilets and unclog drains), electrical equipment including lamps, air conditioners, HVAC equipment, cosmetic items, extension cords, vacuum cleaners, internet devices, replace electrical switches and outlets, and program TV's. Use the Lockout/Tagout system before performing any maintenance work. Display advanced knowledge of all engineering computer programs related to preventative maintenance, energy management, and other systems, including devices that interact with such programs. Perform advanced troubleshooting of hotel Mechanical, Electrical, and Plumbing (MEP) systems. Display the ability to train and mentor other engineers as necessary. Display ability to perform Engineer on Duty responsibilities, including readings and rounds. Follow all company and safety and security policies and procedures; report any maintenance problems, safety hazards, accidents, or injuries; complete safety training and certifications; and properly store flammable materials. Ensure uniform and personal appearances are clean and professional, maintain confidentiality of proprietary information, and protect company assets. Welcome and acknowledge all guests according to company standards, anticipate and address guests service needs, assist individuals with disabilities, and thank guests with genuine appreciation. Adhere to quality expectations and standards. Develop and maintain positive working relationships with others, support team to reach common goals, and listen and respond appropriately to the concerns of other employees. Speak with others using clear and professional language. Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance and heavier lifting or movement tasks with assistance. Move up and down stairs, service ramps, and/or ladders. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Enter and locate work-related information using computers. Perform other reasonable job duties as requested.</p><p><strong>Desired Candidate Profile</strong></p><p>Education: High school diploma or G.E.D. equivalent and vocational or technical background.</p><p>Related Work Experience: Extensive experience and training in general maintenance, electrical or refrigeration, parts inventory and requisition, exterior and interior surface preparation and painting. At least 2 years of hotel engineering/maintenance experience.</p><p>Supervisory Experience: No supervisory experience.</p><p>License or Certification: Valid Driver s License</p><p>REQUIRED QUALIFICATIONS Universal Chlorofluorocarbon (CFC) Certification</p><p>Must meet applicable state and federal certification and/or licensing requirements.</p>

<p>Maintains service operations by inspecting and maintaining vehicles. Main duties include using tools to find any potential issues with someone s vehicle, explains problems with the car to the driver and performing maintenance on the car to fix it or prevent it from future breakdowns or issues.</p><p>Ensure that the job card is issued with details of the repair work to be carried out. Ensures that protective covers are used in all vehicles before carrying out any repairs. Should maintain accurate time recording (clocking on and off) for all repairs. Perform brakes, suspension, tire installation, scheduled maintenance, and all manner of automotive repairs and maintenance that you are qualified to perform Secure our guest's approval to perform the work because of the diagnosis, and always maintain a clean, neat work area Complete thorough automotive vehicle inspections on every vehicle you service, and perform any repairs and maintenance Test drive guest vehicles and use our shop truck in a safe manner to pick up inventory as needed Repair brake and steering systems. Diagnose and repair electrical and electronic systems. Replace or repair transmissions and fuel components as needed. Repair cooling components and the system, including air conditioners and engine cooling. Perform emissions inspections, safety checks, and similar state-regulated vehicle examinations. Maintain a clean, safe working environment. Produce legible and accurate paperwork reflecting work performed. Identify problems with vehicles using the diagnostic equipment. Explain automotive repairs and issues, and provide great customer service. Perform basic auto care and maintenance tasks such as oil changes, fluid level checks, and tire rotation. Repair and replace brake pads, wheel bearings, sensors, and other parts. Perform routine maintenance and general mechanic work on vehicles. Prepared to get additional certification as needed. Willingness to learn with hands-on training. Help keep the repair shop clean and organized. Keep a professional appearance.</p><p><strong>Desired Candidate Profile</strong></p><p>Ensure that the job card is issued with details of the repair work to be carried out. Ensures that protective covers are used in all vehicles before carrying out any repairs. Should maintain accurate time recording (clocking on and off) for all repairs. Perform brakes, suspension, tire installation, scheduled maintenance, and all manner of automotive repairs and maintenance that you are qualified to perform Secure our guest's approval to perform the work because of the diagnosis, and always maintain a clean, neat work area Complete thorough automotive vehicle inspections on every vehicle you service, and perform any repairs and maintenance Test drive guest vehicles and use our shop truck in a safe manner to pick up inventory as needed Repair brake and steering systems. Diagnose and repair electrical and electronic systems. Replace or repair transmissions and fuel components as needed. Repair cooling components and the system, including air conditioners and engine cooling. Perform emissions inspections, safety checks, and similar state-regulated vehicle examinations. Maintain a clean, safe working environment. Produce legible and accurate paperwork reflecting work performed. Identify problems with vehicles using the diagnostic equipment. Explain automotive repairs and issues, and provide great customer service. Perform basic auto care and maintenance tasks such as oil changes, fluid level checks, and tire rotation. Repair and replace brake pads, wheel bearings, sensors, and other parts. Perform routine maintenance and general mechanic work on vehicles. Prepared to get additional certification as needed. Willingness to learn with hands-on training. Help keep the repair shop clean and organized. Keep a professional appearance.</p>

<p>Maintains service operations by inspecting and maintaining vehicles. Main duties include using tools to find any potential issues with someone s vehicle, explains problems with the car to the driver and performing maintenance on the car to fix it or prevent it from future breakdowns or issues.</p><p>KeyRequirements Ensure that the job card is issued with details of the repair work to be carried out. Ensures that protective covers are used in all vehicles before carrying out any repairs. Should maintain accurate time recording (clocking on and off) for all repairs. Perform brakes, suspension, tire installation, scheduled maintenance, and all manner of automotive repairs and maintenance that you are qualified to perform Secure our guest's approval to perform the work because of the diagnosis, and always maintain a clean, neat work area Complete thorough automotive vehicle inspections on every vehicle you service, and perform any repairs and maintenance Test drive guest vehicles and use our shop truck in a safe manner to pick up inventory as needed Repair brake and steering systems. Diagnose and repair electrical and electronic systems. Replace or repair transmissions and fuel components as needed. Repair cooling components and the system, including air conditioners and engine cooling. Perform emissions inspections, safety checks, and similar state-regulated vehicle examinations. Maintain a clean, safe working environment. Produce legible and accurate paperwork reflecting work performed. Identify problems with vehicles using the diagnostic equipment. Explain automotive repairs and issues, and provide great customer service. Perform basic auto care and maintenance tasks such as oil changes, fluid level checks, and tire rotation. Repair and replace brake pads, wheel bearings, sensors, and other parts. Perform routine maintenance and general mechanic work on vehicles. Prepared to get additional certification as needed. Willingness to learn with hands-on training. Help keep the repair shop clean and organized. Keep a professional appearance.</p><p><strong>Desired Candidate Profile</strong></p><p>KeyRequirements Ensure that the job card is issued with details of the repair work to be carried out. Ensures that protective covers are used in all vehicles before carrying out any repairs. Should maintain accurate time recording (clocking on and off) for all repairs. Perform brakes, suspension, tire installation, scheduled maintenance, and all manner of automotive repairs and maintenance that you are qualified to perform Secure our guest's approval to perform the work because of the diagnosis, and always maintain a clean, neat work area Complete thorough automotive vehicle inspections on every vehicle you service, and perform any repairs and maintenance Test drive guest vehicles and use our shop truck in a safe manner to pick up inventory as needed Repair brake and steering systems. Diagnose and repair electrical and electronic systems. Replace or repair transmissions and fuel components as needed. Repair cooling components and the system, including air conditioners and engine cooling. Perform emissions inspections, safety checks, and similar state-regulated vehicle examinations. Maintain a clean, safe working environment. Produce legible and accurate paperwork reflecting work performed. Identify problems with vehicles using the diagnostic equipment. Explain automotive repairs and issues, and provide great customer service. Perform basic auto care and maintenance tasks such as oil changes, fluid level checks, and tire rotation. Repair and replace brake pads, wheel bearings, sensors, and other parts. Perform routine maintenance and general mechanic work on vehicles. Prepared to get additional certification as needed. Willingness to learn with hands-on training. Help keep the repair shop clean and organized. Keep a professional appearance.</p>

<p>Maintains service operations by inspecting and maintaining vehicles. Main duties include using tools to find any potential issues with someone s vehicle, explains problems with the car to the driver and performing maintenance on the car to fix it or prevent it from future breakdowns or issues.</p><p>KeyRequirements Ensure that the job card is issued with details of the repair work to be carried out. Ensures that protective covers are used in all vehicles before carrying out any repairs. Should maintain accurate time recording (clocking on and off) for all repairs. Perform brakes, suspension, tire installation, scheduled maintenance, and all manner of automotive repairs and maintenance that you are qualified to perform Secure our guest's approval to perform the work because of the diagnosis, and always maintain a clean, neat work area Complete thorough automotive vehicle inspections on every vehicle you service, and perform any repairs and maintenance Test drive guest vehicles and use our shop truck in a safe manner to pick up inventory as needed Repair brake and steering systems. Diagnose and repair electrical and electronic systems. Replace or repair transmissions and fuel components as needed. Repair cooling components and the system, including air conditioners and engine cooling. Perform emissions inspections, safety checks, and similar state-regulated vehicle examinations. Maintain a clean, safe working environment. Produce legible and accurate paperwork reflecting work performed. Identify problems with vehicles using the diagnostic equipment. Explain automotive repairs and issues, and provide great customer service. Perform basic auto care and maintenance tasks such as oil changes, fluid level checks, and tire rotation. Repair and replace brake pads, wheel bearings, sensors, and other parts. Perform routine maintenance and general mechanic work on vehicles. Prepared to get additional certification as needed. Willingness to learn with hands-on training. Help keep the repair shop clean and organized. Keep a professional appearance.</p><p><strong>Desired Candidate Profile</strong></p><p>KeyRequirements Ensure that the job card is issued with details of the repair work to be carried out. Ensures that protective covers are used in all vehicles before carrying out any repairs. Should maintain accurate time recording (clocking on and off) for all repairs. Perform brakes, suspension, tire installation, scheduled maintenance, and all manner of automotive repairs and maintenance that you are qualified to perform Secure our guest's approval to perform the work because of the diagnosis, and always maintain a clean, neat work area Complete thorough automotive vehicle inspections on every vehicle you service, and perform any repairs and maintenance Test drive guest vehicles and use our shop truck in a safe manner to pick up inventory as needed Repair brake and steering systems. Diagnose and repair electrical and electronic systems. Replace or repair transmissions and fuel components as needed. Repair cooling components and the system, including air conditioners and engine cooling. Perform emissions inspections, safety checks, and similar state-regulated vehicle examinations. Maintain a clean, safe working environment. Produce legible and accurate paperwork reflecting work performed. Identify problems with vehicles using the diagnostic equipment. Explain automotive repairs and issues, and provide great customer service. Perform basic auto care and maintenance tasks such as oil changes, fluid level checks, and tire rotation. Repair and replace brake pads, wheel bearings, sensors, and other parts. Perform routine maintenance and general mechanic work on vehicles. Prepared to get additional certification as needed. Willingness to learn with hands-on training. Help keep the repair shop clean and organized. Keep a professional appearance.</p>

<p><b>Responsibilities</b></p><ul><li>Disassembly of aircraft wheels and thorough cleaning of all components</li><li>Reassembly of aircraft wheels, including hub assembly, wheel inflation and pressure testing</li><li>Prepares and accurately completes maintenance documentation and reports.</li><li>Maintains equipment specific to job role.</li><li>Maintains a sufficient quantity of serviceable aircraft wheels at immediate notice to support the flying programme and scheduled maintenance aircraft.</li><li>Responsible for reporting and encouraging expedient Error Management Reporting, addressing or highlighting any safety concerns and failings immediately.</li><li>Assist within their area-of-responsibility with regards to audits and act when called upon to take responsibility for addressing / ratifying any audit findings.</li><li>Responsible for their own:</li><ul><li>Time and Attendance.</li><li>Mandatory Training.</li><li>Competencies and Authorisations.</li><li>Saudi Council of Engineering membership.</li><li>Leave usage in accordance with company policy.</li></ul><li>Identify and execute opportunities to improve and enhance the delivery of the TSS service and encourage a Continuous Improvement culture.</li></ul><p>Job Requirements:</p><ul><li>Essential: A recognised qualification to NVQ3/ONC/OND/BTEC level in a relevant technical discipline, or a technical apprenticeship, or suitable equivalent technical qualification acceptable to M&amp;CA OR Part 66 licensed (current or lapsed), or suitable equivalent technical license acceptable to M&amp;CA</li><li>Relevant type training (Q Course) and specific training if required</li><li>Saudi Council of Engineering (SCE) Registration</li><li>Have at least 5 years post qualification practical maintenance experience within operational flying aircraft environment supported by formal recorded workplace applied related training OR 3 years on same aircraft type OR successful completion of BAESSA apprenticeship programme (SNTTP/ TSNTTP)</li><li>Demonstrate knowledge / understanding of aircraft maintenance and engineering</li><li>Understanding and application of human factors, error management, health &amp; safety and proactive hazard analysis, appropriate to the role</li><li>Desirable: Broad Aerospace and Defence company / industry knowledge</li><li>Understand and use Maintenance GoldESP system or similar platform</li><li>Be fully conversant with the interpretation of technical diagrams and Documentation</li><li>Desirable: Experienced stores person, able to drive a fork lift truck, fully conversant with logistics and warehouse management systems, locations and safe handling methods.</li><li>Use of special to type containers.</li><li>Awareness of potential hazards caused by incorrect storage such as moisture ingress and cadmium corrosion.</li><li>Required: Basic IT literacy skills and some knowledge of asset tracking / MRP systems.</li></ul><p><strong>Desired Candidate Profile</strong></p><p>(Saudi National Only) Grade: 8 Location: DHAHRAN Working hours: full time Advert closing: 16 Aug 2026</p><p>Essential: A recognised qualification to NVQ3/ONC/OND/BTEC level in a relevant technical discipline, or a technical apprenticeship, or suitable equivalent technical qualification acceptable to M&amp;CA OR Part 66 licensed (current or lapsed), or suitable equivalent technical license acceptable to M&amp;CA</p><p>Relevant type training (Q Course) and specific training if required</p><p>Saudi Council of Engineering (SCE) Registration</p><p>Have at least 5 years post qualification practical maintenance experience within operational flying aircraft environment supported by formal recorded workplace applied related training OR 3 years on same aircraft type OR successful completion of BAESSA apprenticeship programme (SNTTP/ TSNTTP)</p><p>Demonstrate knowledge / understanding of aircraft maintenance and engineering</p><p>Understanding and application of human factors, error management, health &amp; safety and proactive hazard analysis, appropriate to the role</p><p>Desirable: Broad Aerospace and Defence company / industry knowledge</p><p>Understand and use Maintenance GoldESP system or similar platform</p><p>Be fully conversant with the interpretation of technical diagrams and Documentation</p><p>Desirable: Experienced stores person, able to drive a fork lift truck, fully conversant with logistics and warehouse management systems, locations and safe handling methods.</p><p>Use of special to type containers.</p><p>Awareness of potential hazards caused by incorrect storage such as moisture ingress and cadmium corrosion.</p><p>Required: Basic IT literacy skills and some knowledge of asset tracking / MRP systems.</p>

Additional Information<br><br>Job Number 26118064<br><br>Job Category Engineering & Facilities<br><br>Location Central Area District North of Al Masjid Al Nabawi, Madinah, Saudi Arabia, Saudi Arabia,VIEW ON MAP<br><br>Schedule Full Time<br><br>Located Remotely? N<br><br>Position Type Non-Management<br><br>Position Summary<br><br>Apply paint, stain and other finishes to property walls, ceilings, and furniture using brushes, spray guns, or rollers. Apply primers or sealers to prepare new surfaces for finish coats. Remove old finishes by stripping, sanding, wire brushing, burning, or using water and/or abrasive blasting. Cover surfaces with appropriate material for protection during painting and post appropriate paint signs. Clean up and store paint and painting tools and equipment in appropriate areas. Coordinate with vendor in order to modify colors of paint, stain, or varnish.<br><br>Follow all company and safety and security policies and procedures; report maintenance problems, safety hazards, accidents, or injuries; and complete safety training and certifications. Ensure uniform and personal appearance are clean and professional, maintain confidentiality of proprietary information, and protect company assets. Welcome and acknowledge all guests according to company standards, anticipate and address guests’ service needs, assist individuals with disabilities, and thank guests with genuine appreciation. Speak with others using clear and professional language. Support team to reach common goals. Ensure adherence to quality expectations and standards. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Move up and down a ladder. Grasp, turn, and manipulate objects of varying size and weight. Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance. Stand, sit, or walk for an extended period of time. Perform other reasonable job duties as requested by Supervisors.<br><br>Preferred Qualifications<br><br>Education: Technical, Trade, or Vocational School Degree.<br><br>Related Work Experience: At least 1 year of related work experience.<br><br>Supervisory Experience: No supervisory experience.<br><br>License or Certification: None<br><br>At Marriott International, we are dedicated to being an equal opportunity employer, welcoming all and providing access to opportunity. We actively foster an environment where the unique backgrounds of our associates are valued and celebrated. Our greatest strength lies in the rich blend of culture, talent, and experiences of our associates.  We are committed to non-discrimination on any protected basis, including disability, veteran status, or other basis protected by applicable law.

<h3 >About the Role: Murex Technical Lead</h3> <p >TawanTech is seeking a Murex Technical Lead to join its team in Riyadh, Riyadh Province. This is a full-time position for a professional with 5-10 years of experience, responsible for the comprehensive technical management of the Murex MX3 platform.</p> <h3 >Role Purpose and Scope</h3> <p >The Murex Technical Lead plays a central role in bridging treasury business requirements with robust and scalable technology solutions. This position encompasses the architecture, development, configuration, integration, and environment management of the Murex MX3 platform, leading technical teams, automation initiatives, and enterprise integrations.</p> <h3 >Technical Architecture and Optimization</h3> <p >This role involves leading the technical architecture and development efforts for the Murex platform. Key responsibilities include:</p> <ul > <li >Designing and overseeing MxML and Mx3 configuration.</li> <li >Managing integrations with Treasury Management Systems (TMS), payment hubs, and core banking systems.</li> <li >Optimizing real-time and End-of-Day (EOD) batch processing, automation, and overall system performance.</li> </ul> <h3 >Delivery, Automation, and Environment Management</h3> <p >The Murex Technical Lead drives technical delivery across various financial instruments and processes, focusing on efficiency and reliability. Responsibilities in this area include:</p> <ul > <li >Driving technical delivery for Front-to-Back-to-Risk functions, including IRD, FXMM, Fixed Income, and Commodities.</li> <li >Implementing DevOps practices, Onyx/MxTest, automated testing, and Infrastructure as Code (IaC).</li> <li >Managing Murex environments, release cycles, and deployment processes.</li> </ul> <h3 >Team Leadership and Production Support</h3> <p >A core aspect of this role is providing leadership and ensuring operational stability. The lead will:</p> <ul > <li >Lead and mentor Murex developers and engineers.</li> <li >Establish engineering standards, conduct code reviews, and collaborate with business, risk teams, and external partners.</li> <li >Lead the resolution of critical production issues.</li> <li >Provide support for Oracle/Sybase databases, UNIX/Linux operating systems, Shell/Perl scripting, high availability, disaster recovery, and performance tuning.</li> </ul> <h3 >Required Experience and Technical Skills</h3> <p >Candidates for this position should possess 5-10 years of relevant experience in Murex MX3 environments. Essential technical skills and experience include:</p> <ul > <li >Demonstrated expertise in Murex MX3 platform architecture, development, and configuration.</li> <li >Proficiency in MxML and Murex integration methodologies.</li> <li >Experience with Oracle/Sybase, UNIX/Linux, and scripting languages such as Shell or Perl.</li> <li >Understanding of high availability, disaster recovery, and performance tuning principles.</li> </ul>

<div dir="rtl"><h3 >نبذة عن الوظيفة</h3> <p >تبحث <strong >شركة أقاليم للتشغيل والصيانة</strong> عن <strong >كهربائي مباني</strong> للانضمام إلى فريقها في <strong >الدمام، المنطقة الشرقية</strong>. هذا الدور متاح بنظام <strong >الدوام الكامل</strong>، ويتطلب خبرة عملية تتراوح بين سنتين إلى خمس سنوات في مجال كهرباء المباني.</p> <h3 >ملخص الدور</h3> <p >يتضمن هذا الدور مسؤولية تركيب وصيانة وتصليح الأسلاك الكهربائية والأجهزة والتجهيزات المختلفة ضمن المباني والهياكل الأخرى. يهدف شاغل الوظيفة إلى ضمان الأداء الفعال والآمن للأنظمة الكهربائية وفقاً للمعايير المعتمدة.</p> <h3 >المهام والمسؤوليات الرئيسية</h3> <ul > <li >تركيب المعدات الكهربائية في المباني، بما في ذلك الكابلات والأسلاك والأجهزة الكهربائية الأخرى.</li> <li >إجراء عمليات التفتيش الروتينية كجزء من برامج الصيانة الوقائية، وتحديد أي أضرار أو أعطال في المعدات.</li> <li >تصليح واستبدال المعدات الكهربائية المعطلة مثل الكابلات والأسلاك والأجهزة لضمان استمرارية العمل.</li> <li >استخدام مجموعة متنوعة من الأدوات اليدوية والمعدات الأساسية اللازمة لتنفيذ المهام الكهربائية بكفاءة.</li> <li >الالتزام الصارم بسياسات وإجراءات الصحة والسلامة والبيئة المعمول بها في الشركة ومواقع العمل.</li> </ul> <h3 >المؤهلات والخبرات المطلوبة</h3> <ul > <li >خبرة عملية تتراوح بين <strong >سنتين إلى خمس سنوات</strong> في مجال كهرباء المباني.</li> <li >فهم قوي لمبادئ الأنظمة الكهربائية وطرق تركيبها وصيانتها.</li> </ul> <h3 >متطلبات العمل والسلامة</h3> <p >يجب أن يكون المرشح قادراً على استخدام مجموعة متنوعة من الأدوات اليدوية والمعدات الأساسية لإجراء العمليات الكهربائية بدقة وأمان. كما يتوجب عليه الالتزام التام بجميع سياسات وإجراءات الصحة والسلامة والبيئة لضمان بيئة عمل آمنة له ولزملائه.</p> <h3 >التقديم للوظيفة</h3> <p >إذا كنت تمتلك المؤهلات والخبرة المطلوبة وتتطلع إلى فرصة للانضمام إلى فريق عمل محترف، ندعوك للتقدم لهذه الوظيفة في شركة أقاليم للتشغيل والصيانة.</p></div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><span>Airbus is committed to providing reasonable accommodations as an Equal Opportunity Employer to applicants with disabilities. If you require assistance or an accommodation to complete your application, please contact us at USCareers@airbus.com</span></p><br><br><br><ul><li>Notice: Know Your Rights: Workplace Discrimination is Illegal</li><li>Notice: Pay Transparency Nondiscrimination (English)</li><li>Aviso: Transparencia en el Pago No Discriminación&nbsp;(Spanish)</li></ul><br><br><p><span><b><b>Job Description:</b></b></span></p><br><br><p><span>Airbus US Manufacturing Facility is looking for a Flightline Mechanic to join our Manufacturing department based in Mobile, AL</span></p><br><br><br><p><span>The Flightline Mechanic is responsible for performing Functional Test Procedure, Pre &amp; Post Flight inspection to prepare built aircraft for test flight and delivery readiness. This would include troubleshooting, repairing and inspecting aircraft systems using approved aircraft data. The Flightline Mechanic would proficiently operate and understand a wide variety of test equipment and tooling. The Mechanic must have the ability to interpret technical manuals, drawing and engineering data to support tasks.</span></p><br><br><br><p><b><span>Meet the team:</span></b></p><br><br><p><span>From building to servicing the next generation of aerospace, our team focuses on quality, productivity and efficiency. We ensure the highest quality of care and safety is built into each aircraft we assemble and maintain. Our team members make it happen.</span></p><br><br><br><p><b><span>Your working environment:</span></b></p><br><br><p><span>Nearby on ‘Airbus Way’ you will find the Airbus U.S. Manufacturing Facility for commercial aircraft. Opened at the Mobile Aeroplex at Brookley in 2015, the facility produces A320 Family aircraft and added a second product line for the A220 in 2019. The facility, which strengthens the U.S. aerospace industry, is part of Airbus’ strategy to enhance its global competitiveness by meeting the growing needs of its customers in the United States and beyond.</span></p><br><br><br><p><b>Your challenges<span>:</span></b></p><br><br><ul><li><p><span>Troubleshoot malfunctions, rigs, repairs, replacement aircraft structures, components and aircraft systems of moderate difficulty</span>.</p><br><br></li><li><p><span>Maintain and rework Aircraft Components including but not limited to landing gear, flight surfaces and controls, anti-icing, engines, hydraulics, pneumatics, fuel systems, and ventilation</span>.</p><br><br></li><li><p><span>Servicing, repair cabin interior components</span>.</p><br><br></li><li><p><span>Prepare documentation in accordance with company procedure</span>.</p><br><br></li><li><p><span>Perform day to day aircraft maintenance</span>.</p><br><br></li><li><p><span>Experience with Refuel/Defuel, Aircraft Jack and Tow</span>.</p><br><br></li></ul><p><b>Your boarding pass:</b></p><br><br><ul><li><p><span>3 years minimum aviation experience, preferably in an aviation manufacturing or MRO environment</span>.</p><br><br></li><li><p><span>Valid Airframe License</span>.</p><br><br></li><li><p><span>Must be willing to work Rotation shift schedule including evenings, weekends and holidays</span>.</p><br><br></li><li><p><span>Must possess or be able to obtain a valid passport which allows unrestricted travel to Canada</span>.</p><br><br></li><li><p><span>Vocational/Technical School Credential</span></p><br><br></li></ul><br><p><b><span>Physical Requirements:</span></b></p><br><br><br><p><span>Vision: adequate to enter and read material on computer screens. Able to identify individuals to initiate greetings, the giving of directions and other business interactions.</span></p><br><br><br><p><span>Hearing: able to hear sufficiently to engage in conversation in office settings Able to hear alerts and warning signals.&nbsp;</span></p><br><br><br><p><span>Speaking: able to engage in conversations in person and via electronic means and deliver information to groups of varying size with or without amplification.</span></p><br><br><br><p><span>Equipment Operation: Able to operate a wide range of personal and office electronic equipment.</span></p><br><br><br><p><span>Carrying: able to occasionally carry up to 30lbs while engaging in training, addressing production issues or as part of continuous improvement projects.&nbsp;</span></p><br><br><br><p><span>Lifting: able to occasionally lift up to 50lbs.</span></p><br><br><br><p><span>Pushing/Pulling: able to push/pull items in office areas and on the shop floor.</span></p><br><br><br><p><span>Sitting: able to sit for extended periods of time at the computer and in meetings.&nbsp;</span></p><br><br><br><p><span>Squatting/Kneeling: able to occasionally squat or kneel to retrieve or replace items shelved on bottom shelves.&nbsp;</span></p><br><br><br><p><span>Standing: able to stand for extended periods of time delivering information.&nbsp;</span></p><br><br><br><p><span>Travel: able to travel domestically and internationally for short periods.</span></p><br><br><br><p><span>Walking: able to walk through office and production areas, around flight lines and airstrip sometimes on uneven indoor and/or outdoor surfaces.</span></p><br><br><br><p><b>Citizenship</b></p><br><br><ul><li><p>Authorized to Work in the US without sponsorship</p><br><br></li></ul><p><span>This position is a temporary (contract) position with no specific time period but could be extended or shortened as needed. Contractors are employed by a 3rd party vendor and placed on assignment to Airbus in America.</span></p><br><br><br><p><span>Take your career to a new level and apply</span><b><span> online now!</span></b></p><br><br><br><p>This job requires an awareness of any potential compliance risks and a commitment to act with integrity, as the foundation for the Company’s success, reputation and sustainable growth.</p><br><br><br><p><span><b><b><b><b>Company:</b></b></b></b></span></p><br><br>Airbus Americas, Inc.<br><p><b>Employment Type:</b></p><br><br>Agency / Temporary<br><p><b>Experience Level:</b></p><br><br>Entry Level<br><p><b>Remote Type:</b></p><br><br>On-site<br><p><b>Job Family:</b></p><br><br>Flight line &lt;JF-MA-FL&gt;<p>------</p><br><br><p>------</p><br><br>Airbus provides equal opportunities to all individuals seeking assignment with Airbus without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetics, pregnancy, marital status, veteran status or other legally protected status. In addition to federal law requirements, Airbus complies with applicable state and local laws governing nondiscrimination in every location in which the company has facilities. Airbus expressly prohibits any form of workplace harassment based on race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetics, pregnancy, marital status, veteran status or other legally protected status. This assignment description does not constitute a written or implied contract of employment.<br><p>By submitting your CV or application you are consenting to Airbus using and storing information about you for monitoring purposes relating to your application or future employment. This information will only be used by Airbus.<br>Airbus is committed to achieving workforce diversity and creating an inclusive working environment. We welcome all applications irrespective of social and cultural background, age, gender, disability, sexual orientation or religious belief.</p><br><br><p><span>Airbus is, and always has been, committed to equal opportunities for all. As such, we will never ask for any type of monetary exchange in the frame of a recruitment process. Any impersonation of Airbus to do so should be reported to&nbsp;</span><span>emsom@airbus.com.</span></p><br><br><br> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> No experience required </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Responsibilities:</b></p><ol><li>Perform routine maintenance and troubleshooting on telecommunications equipment, ensuring optimal performance and minimal downtime to enhance service reliability for customers.</li><li>Install and configure telecom systems and devices, utilizing industry-standard tools and protocols to ensure seamless integration into existing infrastructure.</li><li>Conduct regular inspections of network components, identifying potential issues proactively to prevent service disruptions and maintain high quality standards.</li><li>Collaborate with engineering teams to implement system upgrades and enhancements, contributing to the continuous improvement of our telecommunications services.</li><li>Assist in the development of technical documentation and user manuals, ensuring clarity and accessibility for both technical staff and end-users.</li><li>Provide technical support to customers and internal teams, troubleshooting issues effectively and ensuring timely resolution to maintain customer satisfaction.</li><li>Monitor network performance metrics, analyzing data to identify trends and recommend improvements that align with business objectives.</li><li>Participate in training sessions and workshops, staying updated on industry advancements and best practices to enhance personal and team capabilities.</li><li>Adhere to safety protocols and regulatory compliance standards while performing all tasks, ensuring a safe working environment for all employees.</li></ol> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p><br></p><ul><li>Experience not less than 5 years +</li><li>Installation/erection of telecom equipment/cabinet within the communication room. High level of experience in telecom equipment, wiring/termination and DC cabling.</li><li>Able to work on sensitive telecom fiber optic equipment (e.g. MPLS-TP) including ancillary equipment such as DC Panels, IT equipment, fiber optic panels, etc.</li><li>Able to follow and interpret accurately the design drawings and diagrams.</li><li>High regards to adhering on work quality, implementation procedures and safety protocol since activities are carried on within Saudi Energy restricted areas</li><li>Flexible adapting in diverse working environments and working with various nationalities.</li><li><br></li></ul></div>

Company Description YES Machinery is a comprehensive machinery solutions provider offering a wide range of products for steel fabrication, lifting and material handling, industrial solutions, industrial cleaning. YES Machinery focuses on delivering practical machines and tailored solutions that support industrial clients in improving productivity, safety, and efficiency. Key Responsibilities• Installation, commissioning, demonstration, troubleshooting, maintenance, repair, and servicing of industrial machinery.• Perform machine setup, alignment, calibration, testing, and commissioning.• Diagnose and rectify mechanical, hydraulic, pneumatic, electrical, and basic control-system faults.• Attend customer breakdowns and carry out preventive and corrective maintenance.• Provide technical support and basic machine/operator training to customers.• Prepare service reports and coordinate with customers, suppliers, and internal teams.<br>Technical Skills & Requirements• Diploma / ITI in Mechanical, Electrical, Mechatronics, or related technical field.• 2–5 years of hands-on experience in industrial machinery service and maintenance.• Strong knowledge of mechanical, hydraulic, pneumatic, electrical, and basic automation systems.• Knowledge of motors, pumps, gearboxes, bearings, hydraulic valves/cylinders, pneumatic systems, VFDs, sensors, relays, contactors, and control panels.• Ability to read technical drawings, electrical schematics, hydraulic/pneumatic circuits, and machine manuals.• Good troubleshooting and problem-solving skills.• Familiarity with basic diagnostic tools such as multimeters and pressure gauges.• Good understanding of machine safety systems and safe maintenance practices.• Valid Saudi Driving License – Mandatory • Good Arabic and English communication skills –will be an advantage• Willingness to travel across Saudi Arabia and work at customer sites.<br>Machinery Experience – Advantage Experience with machine tools, CNC machines, press brakes, shearing machines, laser cutting machines, rolling machines, drilling machines, waterjet machines, welding equipment, industrial cleaning equipment, vacuum lifting systems, material handling equipment, or similar industrial machinery will be an advantage.