Network Engineer Jobs in Saudi

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Ensure all drawings and information related to the work area are accurate and up to date. Ensures that all the works done are in accordance with the approved construction drawings, contract documents, project specifications, and all applicable standards whether local, national, or international standards. Ensuring checks are carried out on a regular basis before and after execution of activities. Resolve any unexpected technical difficulties and other problems that may arise at any time. Estimates, prepares, and assigns the</p></div></section>

Egis is a leading global architectural, consulting, construction engineering, operations and mobility services firm. We create and operate intelligent infrastructure and buildings that both respond to the climate emergency and contribute to balanced, sustainable and resilient development. Our 20,500 employees operate across over 100 countries, deploying their expertise to develop and deliver cutting-edge innovations and solutions for clients. Through the wide range of our activities, we are central to the collective organization of society and the living environment of citizens all over the world.<br><br><br><br>Job Description<br><br>We are seeking a Road & Safety Engineer (Road Engineer) Strategy Specialist to join our organization in Makkah, Saudi Arabia. In this role, This is a client-supporting technical oversight role on a comprehensive Road Safety Strategy assignment covering Makkah City and the Holy Sites; one of the world's most complex urban environments, handling tens of millions of pilgrims annually alongside a growing permanent population. You will be the senior subject matter authority supporting the client, reviewing, challenging, and accepting the appointed consultant's work, while remaining firsthand where the client itself needs direct technical input outside the consultant's scope.<br><br>You will wear two hats here. On the technical side, you are the client's SME; the person the client turns to for authoritative judgment on the consultant's work across collision data analysis, black-spot methodology, work zone safety, speed limit setting, road safety audits, and incident management and for direct technical input on adjacent client needs that fall outside the consultant's contracted scope. On the program side, you will hold the consultant to deliverables, chair or attend client-side review meetings, manage stakeholder interfaces, and make sure the right things land at the right time.<br><br>Road Safety Strategy Development (Core Task)<br><br>This is the centerpiece of the assignment. You will oversee the consultants’ development of a comprehensive Road Safety Strategy for Makkah City and Holy Sites and contribute directly where the client needs in-house technical input. Oversight covers:Reviewing existing conditions work, collision pattern mapping, data analysis, and the existing policy landscape produced by the consultant Critically reviewing the evaluation and gap analysis against Saudi standards, GCC practice, and global benchmarks (Vision Zero, Safe System, NACTO, PIARC) Steering the selection of Emphasis Areas; the priority themes that will structure the strategy and challenge the consultant's rationale wherever needed. Guiding the Road Safety Strategy document through draft, task force review, and final publication, and accepting it on behalf of the client Reviewing and approving the KPI framework and reporting matrix used to measure implementation progress. Representing the client at consultation events and the strategy launch; these are formal, high-profile moments where the client representative SME should speak with authority. Directing and quality-assuring the black-spot identification methodology, site visits, engineering measure recommendations, cost estimates, and return-on-investment prioritization<br>Work Zone Safety Management<br><br>Oversee the consultant's compliance audits against SAMAS (Saudi construction safety manuals) and relevant codes on active construction sites, and conduct spot-checks directly when the client needs independent verification.<br><br>Review, challenge, and approve the Work Zone Traffic Safety Management Policies and Manuals developed by the consultant, and support their launch.<br><br>Ensure the consultant's program specifically addresses the unique demands of Ramadan and Hajj periods, when the city transforms overnight. Track compliance outcomes and review the consultant's reporting. <br>Road Safety Audits (RSA)<br><br>Review the gap analysis of the existing RSA process against i RAP, PIARC RSA guidelines, and Saudi/GCC practice. Approve updates to Road Safety Audit standards and specifications for local applicability. Technically, oversee the consultants’ conduct of RSAs across the road network, Holy Sites corridors, and key pilgrim routes, and join site visits where on-site presence is necessary. <br>Speed Management<br><br>Review the consultant's analysis of the posted speed limit framework across Makkah's road network. Challenge and approve evidence-based recommendations for appropriate speed limits by road type, land use context, and pedestrian exposure. Endorse proposed locations for speed signs and enforcement radar placement and coordinate sign-off with enforcement agencies. <br>Incident Management Strategy<br><br>Direct and validate the stakeholder mapping across all agencies involved in incident response (traffic police, civil defense, health, municipalities) Review the service design for an integrated incident management system. Review and approve the enabling procedures, cost-benefit model, and outline operating plan. <br>Traffic Safety Committee Support (Ongoing Monthly Role)<br><br>You will be the technical backbone for a standing Traffic Safety Committee, which means:<br><br>Providing administrative coordination and technical secretariat support Conducting ad-hoc technical studies as instructed Managing committee transactions and formal documentation Reviewing and advising on speed reducer (traffic calming) requests from across the city<br>Project Management and Client Support (Daily)<br><br>Beyond the technical work, the candidate should:<br><br>Hold the consultant to the Project Management Delivery System from day one; program, risk register, quality plan, reporting protocol; and maintain the client-side mirror of each. Interface with the consultant's specialist team (transport planners, road engineers, GIS, data analysts, legal/policy expert, QS) and direct them on the client's priorities. Track and accept deliverables against the contract milestones and authorize milestone signoffs. Flag risks early and resolve issues before they become problems; proactively, not reactively. Be present and available in Makkah; this is not a remote or occasional visit role. Be ready to provide direct technical support to the client on adjacent road-safety matters outside the consultant's contracted scope. <br><br><br>Qualifications<br><br>Bachelor's degree (master’s preferred) in Civil Engineering, Transportation Engineering, or a closely related discipline. Proven experience developing and implementing Traffic and road safety strategies and programs14 years Minimum experience, preferred exp in the same field. At least 5 years of direct experience working in the Kingdom of Saudi Arabia or the wider GCC region. Proven history delivering multi-task, multi-year road safety strategies or programs at the city or national level. Working firsthand familiarity with collision data systems, safety audits, speed management programs, and work zone safety; enough to challenge and verify consultant work, and to step in directly where the client needs it. Experience working client-side or interfacing with client-side teams in complex, multi-stakeholder government environments; coordinating across agencies, ministries, and operational bodies. Demonstrated experience preparing and presenting technical work to senior government stakeholders, including Arabic-language correspondence and committee documentation review. Experience in mass gathering / unique events contexts (Hajj, Umrah, large pilgrim flows) would be a significant advantage; this is a genuinely unusual operational environment.

<p>Job Overview</p><p>We are seeking a motivated Mechanical Engineer with a focus on HVAC systems to join our team in Saudi Arabia. This position offers a hands-on opportunity to contribute to the design, analysis, and optimization of heating, ventilation, and air conditioning solutions across commercial and industrial projects. The ideal candidate is a recent graduate or early-career professional eager to develop technical skills, collaborate with cross-functional teams, and deliver reliable, energy-efficient climate-control systems.</p><p>About the Company</p><p>We are a dynamic engineering firm specializing in HVAC ( Contracting and Duct fabrication )</p><p>Key Responsibilities and Duties</p><ul><li>Autocad professional&nbsp;</li><li>heat load calculations</li><li>HVAC technical skills</li><li>site supervising</li><li>Good english</li></ul><p>Qualifications and Requirements</p><ul><li>Bachelor’s or diploma degree in Mechanical Engineering or a closely related field.</li><li>Career level: Trainee/Entry level with a strong interest in HVAC design and systems.</li><li>Basic understanding of HVAC principles, thermodynamics, fluid mechanics, and heat transfer.</li><li>Familiarity with HVAC software tools (e.g., HAP,&nbsp; AutoCAD).</li><li>Knowledge of local regulations and standards in Saudi Arabia related to HVAC and building services is a plus.</li><li>Strong problem-solving, analytical thinking, and attention to detail.</li><li>Effective communication skills in English; proficiency in Arabic is an advantage.</li><li>Willingness to learn, adapt, and work in a collaborative team environment.</li></ul>

<p>Job Overview</p><p>We are seeking a motivated Structural Design Engineer to join our engineering team in Saudi Arabia (Al Jubail City eastern province). This entry-level position offers an excellent opportunity to grow within a dynamic, multidisciplinary environment that focuses on innovative structural systems for buildings ,Factories and Commercial Centers). The successful candidate will contribute to the design, analysis, and detailing of structural components under the supervision of senior engineers, while developing practical solutions that meet safety, code compliance, and project requirements.</p><p>About the Company</p><p>Our firm is a reputable engineering consultancy delivering high-quality design and project delivery services across civil, structural, and architectural disciplines. We pride ourselves on collaborative teamwork, technical excellence, and a client-centered approach that emphasizes efficiency, sustainability, and value-based solutions.</p><p>Key Responsibilities</p><ul><li>Assist in the development of structural models, calculations, and drawings for concrete, steel, and composite structures using relevant software (e.g., ETABS, SAP2000, SAFE, Tekla, AutoCAD/Revit).</li><li>Support senior engineers in performing load calculations, stability checks, and code compliance analyses in line with local standards and international best practices.</li><li>Prepare design sketches, outline reinforcement layouts, and coordinate with architects and MEP teams to ensure constructability.</li><li>Assist with material take-offs, detailing, and preparation of technical submittals and construction documents.</li><li>Participate in design reviews, site visits, and quality assurance activities to ensure accuracy and safety of the built work.</li><li>Contribute to project documentation, reports, and as-built updates as required.</li><li>Stay current with evolving codes, standards, and software tools relevant to structural design.</li></ul><p>Qualifications and Requirements</p><ul><li>University degree in Civil/Structural Engineering (Bachelor’s degree).</li><li>Entry-level professional with a strong interest in structural design and analysis.</li><li>Good understanding of structural theory, material properties, and design codes.</li><li>Proficiency with structural analysis software and CAD/BIM tools; basic programming or scripting skills are a plus.</li><li>Ability to work under supervision and collaborate effectively within a multidisciplinary team.</li><li>Strong communication skills in English; Arabic language proficiency is advantageous for local collaboration.</li><li>Eligibility to work in Saudi Arabia and willingness to relocate to the designated region.</li></ul><p>Required Skills</p><ul><li>Fundamental knowledge of structural design principles for concrete and steel elements.</li><li>Analytical thinking and problem-solving abilities with attention to detail.</li><li>Proficiency in design and drafting software commonly used in structural engineering.</li><li>Effective teamwork, time management, and the ability to handle multiple tasks.</li><li>Commitment to safety, quality, and professional ethics in all project work.</li></ul><p>&nbsp; &nbsp;</p>

<p><strong>Job Title: Senior Site Engineer – Steel Structure</strong><br><strong>Location:</strong> Kingdom of Saudi Arabia (KSA)<br><strong>Company:</strong> Lucky Engineering / Lucky Fabricators &amp; Steel Construction</p><p>&nbsp;</p><p><strong>Job Summary</strong></p><p>Lucky Engineering is looking for an experienced <strong>Senior Site Engineer</strong> with a strong background in <strong>Steel Structure Projects</strong> to oversee and manage site execution activities.&nbsp;</p><p>The ideal candidate will be responsible for supervising steel structure erection works, coordinating with project stakeholders, ensuring quality and safety compliance, and delivering projects on schedule.</p><p>&nbsp;</p><p><strong>Key Responsibilities</strong></p><ul><li>Supervise and manage all steel structure erection and installation activities at the project site.</li><li>Coordinate daily site operations, manpower, equipment, and subcontractors.</li><li>Review and interpret structural drawings, shop drawings, and project specifications.</li><li>Monitor site progress and ensure work is completed according to approved schedules.</li><li>Coordinate with clients, consultants, project managers, and internal departments.</li><li>Ensure compliance with quality standards, project specifications, and HSE regulations.</li><li>Conduct site inspections and resolve technical and operational issues.</li><li>Prepare daily, weekly, and monthly progress reports.</li><li>Monitor material requirements and coordinate with procurement and logistics teams.</li><li>Lead site teams to achieve project milestones within budget and timeline.</li><li>Attend project meetings and provide technical support during project execution.</li></ul><p>&nbsp;</p><p><strong>Requirements</strong></p><ul><li>Bachelor's Degree in Civil Engineering, Mechanical Engineering, or a related discipline.</li><li>Minimum 8+ years of experience in Steel Structure Construction and Erection Projects.</li><li>Strong knowledge of steel structure installation, fabrication, and construction practices.</li><li>Experience managing large-scale industrial, commercial, or infrastructure steel projects.</li><li>Ability to read and interpret structural drawings and technical documentation.</li><li>Strong leadership, coordination, and problem-solving skills.</li><li>Proficiency in MS Office and project reporting.</li><li>GCC/KSA experience is highly preferred.</li><li>Valid driving license preferred.</li></ul><p>&nbsp;</p><p><strong>Mandatory Requirements</strong></p><p>Steel Structure experience is compulsory.<br>Candidates must have hands-on experience in steel structure erection and site execution.<br>Candidates without relevant steel structure experience will not be considered.<br>Immediate joiners are highly preferred.</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>Al Jomaih Energy &amp; Water (AEW) headquartered in Saudi Arabia, is a fast-growing investor, lead developer, and operator of utility and infrastructure projects in various geographical markets such as KSA, GCC, Asia &amp; North Africa, with investments in 6 GW of Conventional and Solar power plants, and around 700,000 m3/day of water.<br> AEW was established in 2007, as a subsidiary of Al Jomaih Holding Company, a leading Saudi conglomerate with a legacy spanning over 80 years, focused on enabling sustainable, social, and economic progress in the Kingdom of Saudi Arabia and beyond.<br> At AEW, our mission is to tackle new technologies, solve complex problems, and leverage our expertise to unlock opportunities in the Power, Renewables &amp; Water Sectors, while driving impact for our stakeholders across the value chain.<br> Overview Graduate Development Program is designed to equip graduates with a strong foundation in the energy and water sector, while developing their engineering, leadership skills, and business acumen working with a leading industry player.<br> This program is designed to provide hands-on exposure across key functions like Project Management, delivery and Asset Lifecycle Management.<br> The trainee will participate in structured rotations, gaining practical experience and developing a strong foundation in project and asset management within a dynamic energy environment.<br> Location: Riyadh Your Job Functions (Duties &amp; Responsibilities) Corporate Project Delivery Learn and understand various types of contracts, shareholder structure etc.<br> Learn about engineering methodology, process flow of documentation and deliverables for a project and assist in the same.<br> Gain exposure to project planning and scheduling concepts and assist in the same.<br> Learn about project management principles and participate in project management activities.<br> Learn and contribute towards company’s HSE commitments.<br> Learn about various stages of the project and participate in the same.<br> Asset Management Learn about plant performance management strategies.<br> Support in monitoring and optimisation of operational asset performance.<br> Gain an understanding of preventive and corrective maintenance planning activities.<br> Maintain asset records, maintenance data, and technical documentation.<br> Support implementation of asset integrity and reliability programs.<br> Learn about risk management and contribute towards the same.<br> Qualifications &amp; Skill Sets Bachelor’s degree in engineering (Mechanical, Electrical, Civil, Industrial, Energy, or related discipline).<br> Recent graduate or up to 1–2 years of internship/work experience.<br> Basic understanding of engineering principles, project management, and asset lifecycle concepts.<br> Proficiency in Microsoft Office applications.<br> Familiarity with engineering software, ERP systems, or maintenance management systems is an advantage.<br> Strong analytical, problem-solving, and organizational skills.<br> Good communication and teamwork abilities.<br> Interest in the energy, utilities, infrastructure, or industrial sectors.<br> What you Gain Structured rotational training across functions.<br> Exposure to large-scale energy operations and projects.<br> Mentorship from experienced professionals.<br> Opportunity of a full-time placement upon successful completion of the program.<br> CORE Competencies Collaboration &amp; Communication Agility Resilience Initiative Adaptability TECHNICAL Competencies Strategic Thinking Result Orientation Stakeholder Management Quick Learner Problem Solver</span> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> No experience required </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Nationality"> <b>Nationality</b> </div> <div class="col is-9 p5" data-automation-id="data_Nationality"> Saudi Arabia </div> </div> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

<p><strong>Procurement / Tendering Engineer</strong></p><p><strong>Nuzul Interiors</strong><br>Location: Riyadh, Saudi Arabia<br>Experience Required: 7–8 Years<br>Industry: Interior Fit-Out, Furniture &amp; Finishing Works</p><p><strong>Job Summary</strong></p><p>Nuzul Interiors is seeking a highly organized and experienced Procurement / Tendering Engineer to manage tendering, sourcing, procurement, and supplier coordination activities for interior fit-out and furniture projects. The role plays a key part in cost control, vendor negotiations, subcontractor management, and ensuring timely procurement aligned with project schedules and budgets.</p><p>The ideal candidate should have strong experience in fit-out projects, excellent commercial awareness, technical understanding of materials and finishes, and the ability to manage multiple tenders and procurement packages simultaneously.</p><p><strong>Key Responsibilities</strong> <strong>1. Tendering &amp; Estimation</strong></p><ul><li>Review tender documents, drawings, specifications, and BOQ packages</li><li>Prepare quantity take-offs and coordinate with the technical office team</li><li>Obtain and evaluate supplier and subcontractor quotations</li><li>Prepare commercial and technical comparison sheets</li><li>Coordinate with design and project teams during tender stages</li><li>Prepare RFQs and manage tender submissions within deadlines</li><li>Analyze project risks, pricing strategies, and procurement requirements</li><li>Maintain tender logs and tracking reports</li><li>Assist in value engineering proposals</li></ul><p><strong>2. Procurement Management</strong></p><ul><li>Source materials, furniture, finishes, and subcontractors for fit-out projects</li><li>Prepare and issue Purchase Orders (POs) and procurement schedules</li><li>Negotiate prices, payment terms, and delivery schedules with suppliers</li><li>Ensure materials comply with approved project specifications</li><li>Coordinate with suppliers for samples, mockups, and approvals</li><li>Track procurement status and ensure timely delivery to site</li><li>Monitor long-lead items and material availability</li><li>Coordinate with warehouse and site teams for delivery inspections</li><li>Maintain and update approved vendor and subcontractor databases</li></ul><p><strong>3. Cost Control &amp; Commercial Coordination</strong></p><ul><li>Monitor procurement budgets and cost tracking</li><li>Prepare procurement cost reports and savings analysis</li><li>Support project managers in variation orders (VOs) pricing</li><li>Ensure procurement activities align with project cash flow and schedules</li><li>Review and validate supplier invoices with finance department</li></ul><p><strong>4. Supplier &amp; Subcontractor Management</strong></p><ul><li>Build and maintain strong relationships with vendors and subcontractors</li><li>Conduct supplier performance evaluations</li><li>Identify alternative suppliers and cost-effective solutions</li><li>Ensure subcontractor compliance with project specifications, timelines, and quality standards</li></ul><p><strong>Requirements</strong></p><p><strong>Education:</strong><br>Bachelor’s Degree in Architecture, Civil Engineering, Interior Design, Construction Management, or related field</p><p><strong>Experience:</strong></p><ul><li>7–8 years of experience in procurement and tendering within interior fit-out, furniture, and finishing projects</li><li>Strong experience in the Saudi market is preferred</li><li>Experience in residential, commercial, hospitality, and office fit-out projects</li></ul><p><strong>Technical Skills:</strong></p><ul><li>Strong knowledge of interior finishing materials, furniture, and fit-out systems</li><li>Ability to read drawings, BOQs, and technical specifications</li><li>Strong understanding of procurement and tendering processes</li><li>Knowledge of local suppliers and subcontractors in Saudi Arabia</li></ul><p><strong>Software Skills:</strong></p><ul><li>AutoCAD</li><li>Microsoft Excel</li><li>Microsoft Office Suite</li><li>ERP Systems</li><li>BOQ &amp; Costing Software</li><li>Revit (Preferred)</li></ul><p><strong>Soft Skills:</strong></p><ul><li>Strong negotiation and communication skills</li><li>Excellent analytical and commercial mindset</li><li>Ability to work under pressure and manage multiple deadlines</li><li>Strong organizational and reporting skills</li><li>Team player with problem-solving attitude</li></ul><p><strong>Employment Details</strong></p><ul><li>Full-time position</li><li>Department: Procurement &amp; Tendering</li><li>Reports to: Project Manager / CEO</li></ul>

<p>They are responsible for troubleshooting, repairing, and maintaining electrical systems in commercial and industrial environments.</p><p>Their duties and responsibilities include:</p><ul><li>Designing, maintaining, implementing, or improving electrical instruments, facilities, components, equipment products, or systems for industrial, commercial or domestic purposes.</li><li>Operating a variety of standard power tools, electric meters and material handling equipment in performing duties.</li><li>Ensuring that work is in accordance with relevant codes.</li><li>Evaluating electrical systems, products, components, and applications by designing and conducting research programs.</li><li>Performing a wide variety of electrical maintenance tasks to service, inspect, troubleshoot, repair, install and maintain electrical equipment and machinery.</li><li>Conducting preventive maintenance programs and keeping maintenance records.</li><li>Providing training and guidance to junior and apprentice electricians as needed.</li><li>Reading blueprints or technical diagrams before doing work.</li><li>Estimating material, labor, or construction costs for budget preparation.</li><li>Keeping abreast of advances in technology and job knowledge by participating in educational opportunities and reading professional publications.</li></ul>

<p>تبحث الشركة عن مهندس ميكانيكي تقني ذو كفاءة عالية للانضمام إلى فريق العمل، على أن يكون مسؤولاً عن دعم وتنفيذ الأعمال الهندسية الميكانيكية، والإشراف الفني على المشاريع، ومراجعة المخططات والمواصفات الفنية، مع ضمان الالتزام بالمعايير الهندسية المعتمدة ومتطلبات الجودة والسلامة.</p><p>&nbsp;</p><p><strong>المهام والمسؤوليات:</strong></p><p>&nbsp;</p><p>* مراجعة وتحليل المخططات والرسومات الميكانيكية الفنية.</p><p>* الإشراف على تنفيذ الأعمال الميكانيكية بالمشاريع ومتابعة سير العمل.</p><p>* إعداد التقارير الفنية الدورية ورفع الملاحظات والتوصيات.</p><p>* التنسيق مع الفرق الهندسية المختلفة لضمان تكامل الأعمال.</p><p>* التأكد من مطابقة الأعمال للمواصفات الفنية والمعايير الهندسية المعتمدة.</p><p>* تقديم الحلول الفنية للمشكلات التي قد تظهر أثناء التنفيذ.</p><p>* متابعة اختبارات التشغيل والاستلام الفني للأعمال الميكانيكية.</p><p>* الالتزام بإجراءات الجودة والسلامة المهنية.</p><p>&nbsp;</p><p><strong>المؤهلات المطلوبة:</strong></p><p>&nbsp;</p><p>* درجة البكالوريوس أو الدبلوم التقني في الهندسة الميكانيكية أو تخصص ذي صلة.</p><p>* خبرة عملية في المجال الهندسي الميكانيكي (يفضل في المشاريع الهندسية أو الاستشارات).</p><p>* إجادة قراءة المخططات والرسومات الفنية.</p><p>* معرفة جيدة بالأنظمة الميكانيكية المختلفة.</p><p>* القدرة على استخدام البرامج الهندسية ذات الصلة.</p><p>* مهارات تحليلية وتنظيمية ممتازة.</p><p>* القدرة على العمل ضمن فريق وتحمل ضغط العمل.7</p><p>* عضوية سارية في Saudi Council of Engineers.</p><p>&nbsp;</p>

We are looking for a results-driven Business Development officer to expand market presence and generate good opportunities across Saudi Arabia. The successful candidate will be responsible for identifying projects at an early stage, building relationships with decision-makers, managing opportunities. Key Responsibilities Identify and qualify new business opportunities across government, semi-government, developers, consultants, contractors, and enterprise accounts. Build a strong pipeline in ICT, AV, Security, Data Centers, and Smart Building solutions. Identify projects before tender or RFQ issuance. Develop relationships with project owners, consultants, PMCs, main contractors, MEP contractors, and technology partners. Manage the complete sales cycle from prospecting and qualification to proposal, negotiation, and closing. Coordinate with Presales, Engineering, Procurement, and Project teams to develop technically and commercially competitive solutions. Monitor market developments, project awards, competitor activity, and upcoming procurement opportunities. Achieve agreed revenue, gross-profit, and pipeline targets. Qualifications Minimum 5 years of business development or site-sales experience in Saudi Arabia. Proven track record in generating and closing technology or infrastructure projects. Strong experience in the following sectors:ICT Infrastructure Audio-Visual Systems Command & Control Centers Networking & Telecommunications Physical Security and ELVData Centers Existing professional network among Saudi government entities, consultants, developers, contractors, or enterprise customers. Strong understanding of project-based sales, tender cycles, prequalification, RFQs, RFPs, and commercial negotiations. Ability to understand technical requirements and translate them into value-based proposals. Excellent communication, presentation, negotiation, and relationship-management skills. Bachelor’s degree in business, Engineering, Information Technology, or a related field. Valid Saudi driving license and willingness to attend client meetings across Saudi cities.

<p>We are looking for a Senior Network Administrator to join our team in Saudi Arabia. Key Responsibilities: Design, implement, and manage enterprise network infrastructure including LAN, WAN, Data Center, Cloud connectivity, SD-WAN, and VPN solutions. Configure and maintain network security solutions including NGFW, IPS/IDS, WAF, NAC, and secure access technologies. Manage and troubleshoot Cisco, Palo Alto, Fortinet, Check Point, F5, and enterprise networking technologies. Support SOC integration requirements including SIEM, NDR, log forwarding, NetFlow, and security monitoring. Perform network troubleshooting, incident management, RCA, and preventive actions. Support Disaster Recovery (DR) and Business Continuity Planning (BCP) activities. Maintain network documentation, diagrams, SOPs, and operational procedures. Ensure compliance with cybersecurity standards and regulatory requirements.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor s degree in Computer Science, Information Technology, Network Engineering, or related field.</li><li>5 8 years of experience in enterprise network administration.</li><li>Hands-on experience with: Cisco networking technologies Palo Alto / Fortinet / Check Point / F5 firewalls LAN/WAN, VLAN, BGP, OSPF, MPLS, SD-WAN VPN technologies (IPSec / SSL VPN) Network monitoring tools (SolarWinds, PRTG, or equivalent) SIEM/SOC integration</li><li>Experience in banking or regulated environments is preferred.</li><li>Knowledge of SAMA Cybersecurity Framework, NCA ECC, PDPL, and NDMO is preferred.</li><li>Strong troubleshooting, analytical, and communication skills.</li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><span>Airbus is committed to providing reasonable accommodations as an Equal Opportunity Employer to applicants with disabilities. If you require assistance or an accommodation to complete your application, please contact us at USCareers@airbus.com</span></p><br><br><br><ul><li>Notice: Know Your Rights: Workplace Discrimination is Illegal</li><li>Notice: Pay Transparency Nondiscrimination (English)</li><li>Aviso: Transparencia en el Pago No Discriminación&nbsp;(Spanish)</li></ul><br><br><p><span><b><b>Job Description:</b></b></span></p><br><br><p><b><b>Position Summary:</b></b></p><br><br><p><span>The <b>Cabin Vendor Manager (CVM)</b> applies ample knowledge of principles, theories, concepts, industry practices in the development of engineering and certification solutions for various cabin modules (i.e. galleys, lavatories, stowage's), passenger and attendant seats, and IFE subjects.</span></p><br><br><br><p><b><span>Meet the team:</span></b></p><br><br><p><span>Our Engineers have the privilege of working on complex, highly engineered machines and are involved at all stages of the aircraft life cycle, from product development to manufacturing and direct support to our airline customers. If you’re interested in designing, creating, and testing the present and future of Airbus products across the globe, join our mission to connect the world.</span></p><br><br><br><p><b><span>Your working environment:</span></b></p><br><br><p><span>The Engineering Center in Mobile, Alabama houses hundreds of Airbus engineers who assist in the design and development of Airbus commercial aircraft cabins, including aftermarket upgrades, reconfigurations and services of all product types across the globe.</span></p><br><br><br><br><p><b>How we care for you:</b></p><br><br><ul><li><p>Financial Rewards:<span>Competitive base salary, incentive compensation which may include profit sharing schemes, retirement savings plan and the ability to participate in an Employee Stock Ownership Plan (“ESOP”)</span></p><br><br></li><li><p>Work/Life Balance:<span>Paid time off including personal time, holidays and a generous paid parental leave program.</span></p><br><br></li><li><p>Health &amp; Welfare:<span>Comprehensive insurance coverage including medical (traditional and high-deductible health plans), prescription, dental, vision, life, disability, Employee Assistance Plan (“EAP”) and other supplemental benefit coverages.</span></p><br><br></li><li><p>Individual Development:<span>Upskilling and development opportunities through our global Leadership University, including unlimited access to 10,000+ e-learning courses focusing on ways to develop your employability, certifications, career path as well as the opportunity to participate in accelerated development programmes and both national and international mobility.</span></p><br><br></li></ul><br><p><span>At Airbus, we support you to work, connect and collaborate more easily and accessibly. Wherever possible, we support flexible working arrangements to stimulate innovative thinking.</span></p><br><br><br><p><b>Your challenges:</b></p><br><br><ul><li><p><span>Responsible for engineering development per the aircraft modification project plan</span></p><br><br></li><li><p><span>Responsible for generating specific technical solutions to support cabin or cargo compartment upgrades including, but not limited to, cabin or cargo monument/equipment installation, monument system and electrical definition.</span></p><br><br></li><li><p><span>Responsible for generating customized monument specifications.</span></p><br><br></li><li><p><span>Responsible for engineering (installation, adaptation or removal) drawings and ensuring their accuracy and quality.</span></p><br><br></li><li><p><span>Responsible for generating installation, adaptation or removal instructions to support input for Service Bulletins.</span></p><br><br></li><li><p><span>Responsible for determining the parts required for monument and kit definition.</span></p><br><br></li><li><p><span>Manage the engineering (installation, adaptation or removal) drawings and generating customized monument specifications using subcontractors (internal and external).</span></p><br><br></li><li><p><span>Support the certification process as required.</span></p><br><br></li><li><p><span>Strong liaison with other departments (both internally and internationally), vendors/suppliers and subcontractors.</span></p><br><br></li></ul><ul><li><p><span>Responsible for vendor liaison activities and meeting support.</span></p><br><br></li><li><p><span>Overall vendor risk and opportunity management.</span></p><br><br></li><li><p><span>Responsible for vendor and internal documentation support of the certification process, including Vendor Service Bulletins check.</span></p><br><br></li><li><p><span>Support with vendor ITCM, PDR, CDR, and FAI reviews with vendors and customers</span></p><br><br></li><li><p><span>Provide customer guidance during technical meetings and reviews.</span></p><br><br></li><li><p><span>Support on-site modification team as required, including direct on-site support during aircraft retrofits at MRO’s</span></p><br><br></li><li><p><span>Responsible for answering/resolving queries during and after aircraft embodiment.</span></p><br><br></li></ul><br><p><b>Your boarding pass:</b></p><br><br><ul><li><p><span>Bachelor’s Degree-Engineering: (Mechanical /Aeronautic/Civil /Electrical Engineering)</span></p><br><br></li></ul><ul><li><p><span>Bachelor’s Degree: Minimum of 3 years of engineering experience; OR Master’s Degree: Minimum of 2 years of engineering experience.</span></p><br><br></li><li><p>​<span>Authorized to Work in the US</span></p><br><br></li></ul><br><ul><li><p><span>Core Track Record: Direct exposure to project or program engineering methodologies.</span></p><br><br></li></ul><ul><li><p><span>CAD Skills: Proven ability to create, interpret, and review designs using industry-standard CAD tools (e.g., CATIA).</span></p><br><br></li></ul><br><ul><li><p><span>Airline / MRO experience desired</span></p><br><br></li></ul><ul><li><p><span>Aircraft Cabin related experience.</span></p><br><br></li></ul><ul><li><p><span>Python or other programming language experiencePractical airline, hangar, or MRO environment experience.</span></p><br><br></li></ul><ul><li><p><span>Specific experience related to Aircraft Cabin interiors or modifications.</span></p><br><br></li></ul><ul><li><p><span>Professional Project Management Certification (PMP).</span></p><br><br></li></ul><ul><li><p><span>Basic programming or coding experience.</span></p><br><br></li><li><p><span>Ability to build and maintain an internal network with colleagues globally</span></p><br><br></li></ul><ul><li><p><span>Ability to interpret an extensive variety of technical aircraft topics</span></p><br><br></li></ul><ul><li><p><span>Excellent communication, coordination, and organization skills</span></p><br><br></li></ul><ul><li><p><span>Service Bulletins: General knowledge of the Service Bulletin production process, alongside the ability to read, interpret, and cross-reference SBs, Bills of Materials (BOM), and customer modification requirements.</span></p><br><br></li></ul><ul><li><p><span>Technical Publications (Preferred): Experienced in navigating and using industry-standard Illustrated Parts Catalogs (IPC) and ATA Technical Manuals (AMM, SRM, etc.).</span></p><br><br></li></ul><ul><li><p><span>Regulatory Frameworks (Preferred): Familiarity with FAA and/or EASA regulations with respect to aircraft parts procurement, technical documentation, and product traceability.</span></p><br><br></li></ul><ul><li><p><span>Synthesis: Exceptional analytical agility with the ability to interpret an extensive variety of complex technical aircraft topics.</span></p><br><br></li></ul><br><ul><li><p><span>Airline / MRO experience desired</span></p><br><br></li></ul><ul><li><p><span>Aircraft Cabin related experience.</span></p><br><br></li><li><p><span>Python or other programming language experience</span></p><br><br></li><li><p><span>Global Networking: Natural ability to build, nurture, and maintain a proactive internal network with colleagues across global Airbus sites.</span></p><br><br></li></ul><ul><li><p><span>Teamwork: A strong team player with the relationship-building skills required to align colleagues, airline clients, external partners, and airworthiness authorities.</span></p><br><br></li></ul><ul><li><p><span>Communication Style: Possesses a synthetic mindset (distilling complex data into clear summaries) balanced with professional assertiveness. Demonstrates high-level listening and oral skills when leading discussions on technical issues and solutions.</span></p><br><br></li></ul><ul><li><p><span>Executive Presentation: Flawless written and verbal communication in technical English, with the ability to confidently present clear project status, risks, and strategies directly to the management team.</span></p><br><br></li></ul><br><ul><li><p><span>General knowledge on service bulletin production process</span></p><br><br></li></ul><br><ul><li><p><span>Ability to read and interpret service bulletin, bill of materials, modification requirements</span></p><br><br></li></ul><ul><li><p><span>Highly proficient in Google Workspace / Google Suite products for documentation and project tracking.</span></p><br><br></li></ul><br><ul><li><p><span>In depth knowledge in project management to identify impact on stakeholders and make the best possible decision for the project</span></p><br><br></li></ul><br><ul><li><p><span>Utilize information from various sources to develop new approaches to mitigate risks</span></p><br><br></li><li><p><span>Strategic PM: In-depth knowledge of project management frameworks to predict downstream impacts on stakeholders and make optimal, objective decisions for the project.</span></p><br><br></li></ul><ul><li><p><span>Risk Mitigation: Proven ability to pull data from disparate, varied sources to develop innovative risk-mitigation approaches.</span></p><br><br></li></ul><ul><li><p><span>Scope: Provide end-to-end engineering and project solutions on cabin modifications to directly support the Service Bulletin production lifecycle.</span></p><br><br></li><li><p><span>Internal Contacts: Collaborate cross-functionally across various organizations within Airbus Customer Services and global Line-Fit production organizations.</span></p><br><br></li><li><p><span>External Contacts: Interface directly with airline customers throughout project lifecycles to masterfully understand, manage, and meet customer expectations.</span></p><br><br></li><li><p><span>Involved, negotiation type communication on a regular basis with internal and external parties</span></p><br><br></li></ul><br><br><p><b><b>Travel Required</b></b></p><br><br><ul><li><p><b><span>Up to 10 % (Domestic and International)</span></b></p><br><br></li></ul><br><br><p><b><b>Physical Requirements</b></b></p><br><br><p><b>Vision: </b>able to see and read computer screen and other electronic equipment with screens, able to read documents, reports and engineering drawings. Daily</p><br><br><p><b>Hearing: </b>able to hear to participate in conversations in person and via teleconference or phone and to hear sounds on production floor including safety warnings or alarms. Daily</p><br><br><p><b>Speaking:</b> able to speak in conversations and meetings, deliver information and participate in communications. Daily</p><br><br><p><b>Equipment Operation (personal computer, telephone, copies, fax machine, and related office equipment and using electronic identification card to enter building floors and internal doors): </b>able to operate most office and personal electronic equipment and some tools including production tools such as hydraulic lifts. Daily</p><br><br><p><b>Carrying: </b>able to carry documents, tools, drawings, electronic equipment up to 30lbs/14kgs. Daily</p><br><br><p><b>Lifting:</b> able to lift documents, tools, drawings, electronic equipment up to 30lbs/14kgs. Daily</p><br><br><p><b>Pushing / Pulling: </b>able to push and pull small office furniture and some equipment and tools. Daily</p><br><br><p><b>Sitting: </b>able to sit for long periods of time in meetings, working on computer. Daily</p><br><br><p><b>Squatting / Kneeling: </b>able to squat or kneel to retrieve or replace items stored on low shelving. Daily</p><br><br><p><b>Standing: </b>able to stand for discussions in offices or on production floor. Daily</p><br><br><p><b>Travel: </b>able to travel independently and at short notice. Rarely</p><br><br><p><b>Walking (include routine walking such as to a shared printer to retrieve documents): </b>able to walk through office and production areas including uneven surfaces. Daily</p><br><br><p><b>Personal Protective Equipment required:</b> <span>Required PPE includes, but is not limited to, Safety Shoes, Safety Glasses, Hearing Protection, Respirators/Masks, and/or Protective Gloves as required by site and/or customer site</span></p><br><br><br><br><br><br><p>This job requires an awareness of any potential compliance risks and a commitment to act with integrity, as the foundation for the Company’s success, reputation and sustainable growth.</p><br><br><br><p><span><b><b><b><b>Company:</b></b></b></b></span></p><br><br>Airbus Americas Customer Services, Inc.<br><p><b>Employment Type:</b></p><br><br>US - Direct Hire<br><p><b>Experience Level:</b></p><br><br>Professional<br><p><b>Remote Type:</b></p><br><br>On-site<br><p><b>Job Family:</b></p><br><br>Customer Eng.&amp;Technical Support&amp;Services &lt;JF-CS-PS&gt;<p>------</p><br><br><p>------</p><br><br>Airbus provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetics, pregnancy, marital status, veteran status or other legally protected status. In addition to federal law requirements, Airbus complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, demotion, termination, layoff, recall, transfer, leaves of absence, compensation, benefits and training. Airbus expressly prohibits any form of workplace harassment based on race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetics, pregnancy, marital status, veteran status or other legally protected status. As a matter of policy, Airbus does not sponsor visas for US positions unless specified. Only applicants with current work authorization will be considered. Airbus does not offer tenured or guaranteed employment. Employment with Airbus is at will, meaning either the company or the employee can terminate the employment relationship at any time, with or without cause, with or without notice. Airbus reserves the right to revise or change job duties and responsibilities as the need arises. This position description does not constitute a written or implied contract of employment.<br><p>By submitting your CV or application you are consenting to Airbus using and storing information about you for monitoring purposes relating to your application or future employment. This information will only be used by Airbus.<br>Airbus is committed to achieving workforce diversity and creating an inclusive working environment. We welcome all applications irrespective of social and cultural background, age, gender, disability, sexual orientation or religious belief.</p><br><br><p><span>Airbus is, and always has been, committed to equal opportunities for all. As such, we will never ask for any type of monetary exchange in the frame of a recruitment process. Any impersonation of Airbus to do so should be reported to&nbsp;</span><span>emsom@airbus.com.</span></p><br><br><br> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> 2+ years </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><strong>1. JOB DETAILS:</strong></p><br> <p><strong>Position Title:</strong> Engineer</p><br> <p><strong>Broad Band:</strong> M09: Professional</p><br> <p><strong>Talent Pipeline Layer:</strong> Managing Self Technical/Professional</p><br> <p><strong>2. OVERALL JOB PURPOSE:</strong></p><br> <p>Technology application within an engineering discipline, and/or a supporting role within area of expertise/or portfolio of projects. (Operating level: Execution)</p><br> <p><strong>3. QUALIFICATIONS, EXPERIENCE &amp; SKILLS:</strong></p><br> <p><strong>Qualification: </strong></p><br> <p>1. Bachelors of Engineering (Specific discipline) + 2 years as Trainee Engineer <br> 2. Masters of Engineering (Specific discipline) + min 6 months as Trainee Engineer</p><br> <p><strong>Experience: </strong></p><br> <p>1. 4 years relevant experience (subject to qualification)</p><br> <p><strong>Skills: </strong></p><br> <p>1. Analysis and modelling of engineering components, systems, processes <br> 2. System/Process optimisation <br> 3. Risk Management/Analysis <br> 4. Conceptualising engineering components, systems <br> 5. Able to independently manage own work planning and delivery according to targets; proven application <br> 6. Technical interpretation and application of industry knowledge and expertise <br> 7. Effective verball and written communication skills <br> 8. Sound analytical and problem solving skills <br> 9. Entrepreneurial and commercial thinking <br> 10. Competent in managing projects <br> 11. Ability to cope with pressures and setbacks <br> 12. Ability to follow instructions and procedures <br> 13. Good persuading and influencing skills <br> 14. Ability to think and interact globally <br> 15. Ability to adapt and respond to change <br> 16 . Beginner, presentation and negotiation skills</p><br> <p><strong>4. KEY ACCOUNTABILITIES:</strong></p><br> <p><strong>Focus Area</strong></p><br> <p>Get results through individual contribution, effort and self management</p><br> <p><strong>Operational / Functional</strong></p><br> <p>1. Consistently delivers on all service level agreements <br> 2. Quality results through cost effective service and on time support <br> 3. Cost awareness and control <br> 4. technical expertise and advice <br> 5. technical/operating systems and models <br> 6. HSE targets</p><br> <p>7. Participate in solving problems within a team context involving multiple stakeholders <br> 8. Identify stakeholder needs to set specific technical requirements (with guidance) <br> 9. Independent idea generation within team context (operational impact) <br> 10. Analyse work processes and implement actions to improve own technical performance <br> 11. Conform to quality standards, specifications and technical requirements <br> 12. Demonstrae understanding of own function's quality standards <br> 13. Contribute to decisions and/or carry out tasks which optimise total cost of ownership <br> 14. Balance cost, schedule, quality as per risk level (with guidance) <br> 15. Providing</p><br> <p><strong>Leadership</strong></p><br> <p>1. Understand, support and live the Ma'aden vision, values and goals <br> 2. Takes accountability for personal improvement, personal development, skills development and effectiveness <br> 3. Supports and articulate personal goals that are aligned to the business direction, that lead to personal development and effectiveness; Continuously strives to improve personal mastery, professional growth and business skills (ensuring technical/professional development in specialist area) <br> 4. Establish professional standards for work, project plans and organization to ensure service provision and effective individual contribution <br> 5. Share expertise freely and often during the application/review of policies, practices, standards, procedures and methods <br> 6. Conduct analysis to formulate recommendations and design solutions and implement them effectively, problem solving and decisions quality - Analysed, formulated recommendations, designed solutions and implemented them effectively <br> 7. Progress monitoring, reporting and corrective action. <br> 8. Statutory compliance and professional practices.</p><br> <p>9. Act as coach and mentor within team <br> 10. Ensuring continous personal and professionsl growth and development <br> 11. Facilitating transformation and change in respect to procedures <br> 12. Facilitating continous improvement <br> 13. Continously communicate technical and professional concepts and developments to customers</p><br> <p><strong>Relationships</strong></p><br> <p>1. Build constructive working relationships with manager, peers, clients and other service providers (all stakeholders) to ensure effective stakeholder relationships <br> 2. Supports peers/team members to achieve team objectives through knowledge sharing, networking and collaboration with colleagues and other teams <br> 3. Maintain Manager and peer relationships marked by professional communication, behaviour and actions that results in high levels of credibility, trust and respect throughout the business unit or function <br> 4. Consistently meet customer and business requirements through technical/professional communication <br> 5. Puts forward new ideas, thinking and approaches adopted and supported by the business</p><br> <p>6. Build credibility and constructive working relationship with multi-disciplinary project teams <br> 7. Create and maintained well developed internal network <br></p><br> <p><strong>5. COMPETENCIES:</strong></p><br> <p><strong>Technical/Functional</strong></p><br> <p>1. Sufficient working knowledge of relevant technical procedures, specifications and legal frameworks <br> 2. Proficient knowledge of applicable engineering technologies <br> 3. Aware of application of appropriate technologies <br> 4. Proficient technical analysis and problem solving <br> 5. Proficient capability implementing technical solutions <br> 6. General knowledge of system/process optimisation <br> 7. General working knowledge of engineering design <br> 8. General know-how to develop innovative technical solutions <br> 9. Sufficient understanding of business processes and value chain in order to defend own value addition <br> 10. Ability to challenge cost and schedule in resepect to required quality standards <br> 11. Sound kknowledge of company standards, procedures and methods</p><br> <p><strong>Leadership</strong></p><br> <p>• Developing self <br> • Embrace digitalisation within the function <br> • Networking and collaboration</p><br> <p>1. Ability to transfer knowledge within own team</p><br> <p><strong>Safety</strong></p><br> <p>• Safety advocate - anywhere and everywhere <br> • Advanced awareness and understanding of HSE rules and procedures <br> • Concern for own wellbeing and that of others <br> • Ability to pro-actively identifying safety hazards and act accordingly</p><br><br> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> No experience required </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

<p>IT Operations is the frontline connection between IT@IFS and our global user community. Delivering local and remote support that ensures our colleagues have seamless access to the technology and systems they need to work efficiently. By providing responsive, high-quality support and continuously improving IT services, we enable teams to focus on delivering value without technical disruptions. This mid-level role is crafted for experienced IT professionals who excel in delivering high-quality technical support directly to end users across varied environments. As an IT Support Engineer, you are not only a frontline troubleshooter but also a strategic contributor to the broader support framework. You act as a critical escalation point for complex technical issues that go beyond first-line resolution, applying deep diagnostic expertise and a methodical approach to problem-solving. Your responsibilities span across maintaining and enhancing the performance of end-user systems and managing device configurations. In this capacity, you operate with a high degree of autonomy, often leading initiatives that improve service delivery and user satisfaction. You are expected to proactively identify inefficiencies, implement system optimizations, and contribute to continual service improvement efforts. Collaboration is key, as you work closely with cross-functional and cross-regional teams to uphold service excellence, share best practices, and align support strategies with organizational goals. Your role also involves mentoring junior support staff, shaping technical documentation, and participating in the rollout of new technologies and tools that enhance the end-user experience. Ultimately, this position demands a balance of hands-on technical proficiency, strategic thinking, and a user-centric mindset. You are a trusted technical advisor within the support ecosystem, driving operational resilience and ensuring that users across the enterprise experience seamless, secure, and responsive IT services.</p><p>Key Responsibilities</p><ul><li>Deliver Advanced Multi-Platform Support: Provide expert-level technical assistance across Windows, macOS, and mobile platforms. Ensure seamless user experiences by resolving complex device, application, and connectivity issues both onsite and remotely.</li><li>Lead Troubleshooting &amp; Escalation Management: Take ownership of persistent or high-impact technical problems, applying deep diagnostic expertise. Collaborate with infrastructure and application teams to escalate and resolve issues efficiently.</li><li>Support &amp; Optimize Office IT Infrastructure: Maintain and enhance video conferencing systems, network connectivity, and shared office technologies. Ensure meeting spaces and collaboration tools are reliable, user-friendly, and aligned with hybrid work needs.</li><li>Represent IT in Cross-Functional Projects: Act as a technical liaison in office expansions, infrastructure upgrades, and service transitions. Provide input on planning, implementation, and post-deployment support.</li><li>Maintain Documentation &amp; Knowledge Sharing: Create and refine internal documentation, SOPs, and troubleshooting guides. Contribute to team knowledge bases and mentor peers through structured learning and informal coaching.</li><li>Provide Regional Onsite Support: Travel occasionally to regional offices to deliver hands-on support, assist with deployments, and build relationships with local teams. Ensure consistent service standards across locations.</li></ul><p>Skills &amp; Competencies</p><ul><li>Advanced Troubleshooting: Diagnoses and resolves complex, persistent, or multi-layered technical issues across Windows, macOS, and mobile platforms. Apply structured problem-solving and leverages enterprise tools to ensure long-term resolution and user satisfaction.</li><li>MacOS Expertise: Demonstrates deep proficiency in macOS administration, including user account management, software deployment, system preferences, and device compliance. Confidently support Apple environments in mixed-platform workplaces.</li><li>Security Awareness: Upholds high standards of endpoint and data security in collaboration with the Security Operations Centre (SOC). Support patching, access controls, and incident response protocols while promoting user awareness and safe practices.</li><li>Project Collaboration: Actively contributes to cross-functional IT initiatives such as infrastructure upgrades, office expansions, and technology rollouts. Provide technical input, support implementation, and ensure smooth transitions for end users.</li><li>Documentation &amp; Knowledge Sharing: Creates and maintains clear, actionable documentation including SOPs, troubleshooting guides, and internal knowledge base articles. Share expertise with peers and junior staff to promote consistency and continuous learning.</li><li>Customer Service Excellence: Delivers high-quality support across multiple channels - face-to-face, Teams, email - with professionalism, empathy, and clarity. Build trust with users by resolving issues efficiently and communicating effectively.</li><li>Autonomy &amp; Leadership: Operates independently with minimal supervision, managing priorities and resolving escalations. Mentor junior team members, lead local initiatives, and contribute to team development and service improvement.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><strong>Education:</strong> Bachelor's degree in Information Technology, Computer Science, Computer Systems &amp; Network or System Engineering (or equivalent experience).</li><li><strong>Certifications:</strong> Relevant certifications (e.g., ACSP, ACiT, Microsoft Modern Desktop, ITIL Foundation).</li><li><strong>Experience Requirements:</strong> Strong professional IT support experience, including remote and onsite roles. At least 2 years of experience in IT operations or IT support function. Advanced proficiency in Windows, macOS, and mobile platforms. Strong experience with MDM tools (Mosyle, Intune). Familiarity with ITIL service management and compliance practices. Experience supporting a global customer base and collaborating across time zones. Hands-on experience with troubleshooting end-user IT equipment (Laptops, Monitor etc.) hardware issues will be an added advantage. Strong understanding in basic IT technical concepts such as Microsoft Services, Networking, IT Infrastructure etc. Ability to work in a fast-paced, ever-changing environment. Work effectively individually or in a team-oriented, collaborative environment with great interpersonal skills. Demonstrated professionalism, service mindset, and interpersonal skills.</li><li><strong>Growth Indicators:</strong> Leads Local Support Operations: Serves as the go-to technical lead for regional support activities, coordinating daily workflows, mentoring team members, and ensuring consistent service delivery aligned with enterprise standards. Improves Support Processes &amp; User Experience: Identifies recurring challenges and inefficiencies, then initiates and implements enhancements to support workflows, documentation, and user-facing services. Advocates for solutions that reduce friction and elevate satisfaction. Recognizes AI as a critical tool for automating tasks, analysing support trends, and enhancing responsiveness. Influences Strategic IT Planning: Provides input on infrastructure decisions, technology rollouts, and service design. Collaborates with cross-functional teams to align support capabilities with broader IT goals and operational need.</li></ul>

<p>In a world of possibilities, pursue one with endless opportunities. Imagine Next! At Parsons, you can imagine a career where you thrive, work with exceptional people, and be yourself. Guided by our leadership vision of valuing people, embracing agility, and fostering growth, we cultivate an innovative culture that empowers you to achieve your full potential. Unleash your talent and redefine what s possible.</p><p>Parsons is looking for an amazingly talented Senior Construction Engineer to support the construction management, site coordination, technical supervision, and delivery of external infrastructure works for a major Airport, Infrastructure, and Airfield Development Project. The successful candidate will be responsible for overseeing the execution of external area works including airport roads, access roads, hardscape areas, landscaping interfaces, pedestrian areas, parking facilities, service roads, utility corridors, drainage networks, external structures, and associated infrastructure works. The Senior Construction Engineer will provide technical leadership on site, ensuring construction activities are executed safely, efficiently, and in compliance with approved designs, project specifications, quality requirements, and airport operational standards. The role requires extensive experience in major infrastructure projects, construction supervision, multidisciplinary coordination, and stakeholder management.</p><ul><li>Lead and coordinate external area construction activities throughout the project lifecycle.</li><li>Provide technical guidance and support to site engineers, inspectors, contractors, and subcontractors.</li><li>Monitor construction progress against approved schedules, milestones, and project objectives.</li><li>Ensure construction activities are executed in accordance with approved drawings, specifications, method statements, and project requirements.</li><li>Support the Delivery Partner in achieving successful project delivery and operational readiness.</li><li>Oversee construction activities related to: Airport access roads and internal road networks. Service roads and operational routes. Parking areas and vehicle circulation zones. Pedestrian walkways and external hardscape areas. Utility corridors and external infrastructure interfaces. Drainage systems and stormwater management infrastructure. External civil works supporting terminals and airport facilities.</li><li>Ensure proper coordination between external works and airport operational requirements.</li><li>Verify construction methodologies and sequencing are suitable for complex airport environments.</li><li>Review contractor technical submissions including: Shop drawings. Method statements. Material submittmits. Technical queries (RFIs). Inspection requests.</li><li>Provide technical clarification and support resolution of site-related engineering issues.</li><li>Coordinate with design teams to address construction challenges and design modifications.</li><li>Ensure timely closure of technical issues impacting project progress.</li><li>Monitor contractor compliance with approved quality requirements and construction procedures.</li><li>Coordinate with QA/QC teams to ensure inspections and testing activities are completed.</li><li>Verify workmanship, materials, and installation activities comply with project specifications.</li><li>Review inspection reports, test results, and quality records.</li><li>Support implementation of corrective actions for non-conformance issues.</li><li>Coordinate external works interfaces with: Civil engineering works. Pavement and airfield systems. Utilities. Electrical systems. Mechanical systems. ICT infrastructure. Landscaping and architectural works.</li><li>Support resolution of multidisciplinary coordination issues.</li><li>Participate in coordination meetings with contractors, consultants, and stakeholders.</li><li>Monitor daily and weekly construction activities and progress.</li><li>Review contractor look-ahead schedules and construction plans.</li><li>Identify potential delays, risks, and constraints affecting delivery.</li><li>Support development of recovery plans and mitigation measures.</li><li>Provide progress updates and technical input to project management.</li><li>Coordinate with the Client, consultants, contractors, subcontractors, and airport stakeholders.</li><li>Participate in site meetings, progress meetings, and technical workshops.</li><li>Ensure effective communication between project teams.</li><li>Support resolution of construction-related issues and stakeholder concerns.</li><li>Promote a strong safety culture across all external area construction activities.</li><li>Ensure contractors comply with project HSE requirements, airport safety procedures, and approved risk assessments.</li><li>Participate in site safety inspections and observations.</li><li>Support implementation of corrective actions related to HSE findings.</li><li>Ensure construction activities consider environmental requirements and sustainability objectives.</li><li>Prepare and review construction progress reports, site records, and technical updates.</li><li>Maintain records of inspections, technical issues, approvals, and construction decisions.</li><li>Support preparation of project completion documentation and handover requirements.</li><li>Provide regular updates to Construction Management regarding progress, risks, and technical challenges.</li></ul><p>Bachelor's Degree in Civil Engineering or related Engineering discipline. Professional certification in construction management is an advantage. Minimum 10 years of experience in construction supervision and delivery of major infrastructure projects. Proven experience in: Airport developments. Transportation infrastructure. Large-scale civil construction projects. Strong experience in external works including roads, drainage, utilities, hardscape, and infrastructure coordination. Experience working with contractors, consultants, and client representatives in complex project environments. Experience supporting Delivery Partner, PMC, Engineer, or Client-side construction management roles. Strong knowledge of civil construction methods, materials, and site execution practices. Good understanding of airport infrastructure requirements and operational constraints. Experience reviewing drawings, specifications, method statements, and technical submissions. Knowledge of construction quality requirements, inspection processes, and testing procedures. Familiarity with project management systems, progress monitoring, and reporting tools. Strong problem-solving, coordination, and decision-making skills. Excellent communication and stakeholder management capabilities. Ability to manage multiple construction priorities in a fast-paced airport project environment.</p><p><strong>Desired Candidate Profile</strong></p><p>Bachelor's Degree in Civil Engineering or related Engineering discipline. Professional certification in construction management is an advantage. Minimum 10 years of experience in construction supervision and delivery of major infrastructure projects. Proven experience in: Airport developments. Transportation infrastructure. Large-scale civil construction projects. Strong experience in external works including roads, drainage, utilities, hardscape, and infrastructure coordination. Experience working with contractors, consultants, and client representatives in complex project environments. Experience supporting Delivery Partner, PMC, Engineer, or Client-side construction management roles. Strong knowledge of civil construction methods, materials, and site execution practices. Good understanding of airport infrastructure requirements and operational constraints. Experience reviewing drawings, specifications, method statements, and technical submissions. Knowledge of construction quality requirements, inspection processes, and testing procedures. Familiarity with project management systems, progress monitoring, and reporting tools. Strong problem-solving, coordination, and decision-making skills. Excellent communication and stakeholder management capabilities. Ability to manage multiple construction priorities in a fast-paced airport project environment.</p><p>Professional Engineer (PE), Chartered Engineer (CEng), or equivalent professional registration. Experience on major international airport construction projects. Knowledge of ICAO Annex 14 and airport infrastructure requirements. Experience with FIDIC or similar international contract frameworks. Experience in Design-Build, EPC, PMC, or Delivery Partner project environments. Familiarity with BIM coordination and digital construction management tools. Experience managing complex external works within operational airport environments. Strong contractor management and stakeholder coordination experience.</p>

<p>In a world of possibilities, pursue one with endless opportunities. Imagine Next! At Parsons, you can imagine a career where you thrive, work with exceptional people, and be yourself. Guided by our leadership vision of valuing people, embracing agility, and fostering growth, we cultivate an innovative culture that empowers you to achieve your full potential. Unleash your talent and redefine what s possible.</p><p>Parsons is looking for an exceptionally talented QA/QC Engineer to join our site team on a major public realm development in Diriyah, which includes a series of iconic and neighborhood parks, open spaces, and over 55 kilometers of streetscape. The objective of this program is to create a vibrant, inclusive environment that enhances livability, accessibility, and community well-being.</p><ul><li>Review the Contractor's material submittals and obtain the required approvals according to the applicable standards and project specifications.</li><li>Serves as the focal point for the scheduling and control of construction materials and equipment at the job site</li><li>Conducts inspections to determine if work has been done in accordance with contract specifications.</li><li>Coordinates work of subconsultants for material testing</li><li>Maintains office files related to the project, material inspections and writes daily diaries.</li><li>Prepares daily reports and other documentation, as required by the contract</li><li>Verifies that only approved materials are incorporated in the work</li><li>Recognizes potential conflicts, issues and problems on construction materials, and reports to supervisor with proposed solution</li><li>Collects, reviews and files Certificate of Compliance, MSDS, inspection tags and other information relevant to the materials used.</li><li>May provide technical guidance to lower-level</li><li>Participates in the development of job safety practices and in the preparation of safety reports</li><li>Participates in the development of quality control reports and procedures</li><li>Capability to perform math calculation in order to prepare engineering calculations, graphs and charts</li><li>Observe, check and record works execution is in accordance with approved methods</li><li>Check material delivered are as approved and properly stored</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor's Degree in Engineering.</li><li>Minimum of 8 years engineering experience and a minimum of 5 years' experience as material engineer in the specific infrastructure projects.</li><li>Experience in the operations and maintenance of roads, highway, bridges at domestic and/or foreign locations.</li><li>Knowledge of English grammar and composition, the ability to communicate clearly both orally and in writing; to follow oral and written instructions, prepare written messages and simple charts and graphs.</li><li>Ability to comply with multitude of requirements as applicable to the project based on client and industry standards</li><li>Must be able to recognize hazardous work conditions and take action if necessary</li><li>Ability to use good judgment and work with others is required</li></ul>

<p>In a world of possibilities, pursue one with endless opportunities. Imagine Next! At Parsons, you can imagine a career where you thrive, work with exceptional people, and be yourself. Guided by our leadership vision of valuing people, embracing agility, and fostering growth, we cultivate an innovative culture that empowers you to achieve your full potential. Unleash your talent and redefine what s possible.</p><p >Bachelor's Degree in Electrical Engineering or related Engineering discipline. Master's Degree in Electrical Engineering or Power Systems is considered an advantage. Minimum 10 years of experience in electrical engineering design, review, and construction supervision. Proven experience on major airport, aviation, infrastructure, or large-scale transportation projects. Strong experience with MV/LV power distribution, substations, emergency power systems, lighting systems, and electrical infrastructure. Experience delivering electrical systems for: Passenger terminals. Cargo facilities. Airfield infrastructure. Airport support buildings. Critical operational facilities. Experience coordinating multidisciplinary engineering teams and stakeholders. Strong knowledge of electrical engineering principles, power distribution systems, and airport electrical infrastructure. Knowledge of international electrical standards including IEC, IEEE, NFPA, NEC, BS/EN standards, and local authority requirements. Understanding of airport electrical requirements and operational resilience standards. Experience with electrical design software and analysis tools such as ETAP, SKM PowerTools, Dialux, or equivalent. Familiarity with BIM platforms and multidisciplinary coordination processes. Strong technical review, problem-solving, and decision-making capabilities. Excellent communication, leadership, and stakeholder management skills. Ability to manage multiple priorities in a complex airport project environment.</p><p >Professional Engineer (PE), Chartered Engineer (CEng), or equivalent professional registration. Experience on international airport expansion or greenfield airport development projects. Knowledge of ICAO standards, FAA requirements, and aviation electrical systems. Experience with airfield lighting systems (AGL), approach lighting systems, and navigational aid power requirements. Experience working under FIDIC or similar international contract frameworks. Experience supporting Design-Build, EPC, PMC, or Delivery Partner project delivery models. Knowledge of smart grid solutions, renewable energy integration, and sustainable airport infrastructure. Strong authority coordination and stakeholder management experience.</p><p><strong>Desired Candidate Profile</strong></p><p><br></p>

<p>In a world of possibilities, pursue one with endless opportunities. Imagine Next! At Parsons, you can imagine a career where you thrive, work with exceptional people, and be yourself. Guided by our leadership vision of valuing people, embracing agility, and fostering growth, we cultivate an innovative culture that empowers you to achieve your full potential. Unleash your talent and redefine what s possible.</p><p>Parsons is looking for an amazingly talented Mechanical Lead Engineer to lead the mechanical engineering design review, technical coordination, construction support, and systems integration activities for a major Airport, Infrastructure, and Airfield Development Project. The successful candidate will provide technical leadership for mechanical systems associated with passenger terminals, concourses, cargo facilities, airport support buildings, maintenance facilities, and other critical airport infrastructure. The Mechanical Lead Engineer will oversee the review and coordination of mechanical engineering solutions including HVAC systems, chilled water systems, ventilation systems, plumbing systems, fire protection interfaces, building services, mechanical equipment, and airport operational facilities. The role requires extensive experience in airport mechanical systems, multidisciplinary coordination, design management, construction supervision, testing and commissioning, and compliance with international standards and aviation operational requirements.</p><p>Lead and manage mechanical engineering activities across the airport development program. Provide technical leadership and guidance to mechanical engineers, designers, consultants, and contractors. Establish mechanical engineering review procedures, technical requirements, and delivery standards. Ensure mechanical engineering deliverables align with project objectives, contractual requirements, and airport operational needs. Support engineering resource planning and technical governance activities. Lead the review of mechanical designs, calculations, technical reports, drawings, specifications, and engineering submissions. Review mechanical systems associated with: Passenger terminals and concourses. Cargo terminals and logistics facilities. Airport operational buildings. Maintenance and support facilities. Utility and infrastructure buildings. Verify compliance with project specifications, international standards, client requirements, and authority regulations. Support value engineering initiatives to improve system efficiency, reliability, maintainability, and lifecycle performance. Review HVAC system designs including chilled water systems, air handling units (AHUs), fan coil units (FCUs), ventilation systems, and building controls interfaces. Assess cooling and heating load calculations, equipment selections, and system performance requirements. Review central plant systems including chillers, pumps, cooling towers, and associated mechanical infrastructure. Ensure HVAC systems meet airport operational requirements, passenger comfort standards, energy efficiency objectives, and sustainability targets. Coordinate HVAC interfaces with architectural, structural, electrical, ICT, and BMS disciplines. Review mechanical utility systems including: Domestic water systems. Drainage and sanitary systems. Hot water systems. Pumping systems. Mechanical equipment connections. Coordinate fire protection system interfaces including fire pumps, sprinkler systems, fire suppression systems, and firefighting infrastructure. Ensure mechanical systems are properly integrated with airport facilities and operational requirements. Review equipment rooms, plant areas, access requirements, and maintenance considerations. Review mechanical systems supporting: Passenger processing facilities. Baggage handling areas. Cargo facilities. Airport lounges and commercial areas. Maintenance and operational buildings. Ensure mechanical systems support reliability, redundancy, and continuous airport operations. Coordinate interfaces with specialist airport systems and operational technology requirements. Support operational readiness and maintainability reviews. Provide mechanical engineering support during construction, installation, testing, commissioning, and handover activities. Review contractor shop drawings, material submittmits, method statements, RFIs, and technical queries. Conduct site inspections to verify compliance with approved mechanical designs and project specifications. Support resolution of mechanical technical issues affecting project delivery. Witness testing and commissioning activities including performance testing and system validation. Coordinate with the Client, airport authorities, consultants, contractors, utility providers, and regulatory agencies regarding mechanical engineering matters. Support technical approvals, authority submissions, and design review processes. Participate in technical workshops, coordination meetings, and engineering review sessions. Ensure effective management of mechanical interfaces across all project stakeholders. Ensure mechanical works comply with project specifications, quality requirements, and international standards. Participate in technical audits, inspections, and engineering reviews. Monitor contractor compliance with approved mechanical procedures and construction methodologies. Review testing records, commissioning reports, and operation documentation. Support implementation of corrective actions and continuous improvement initiatives. Prepare and review mechanical engineering reports, technical assessments, design review comments, and engineering recommendations. Maintain records of mechanical design reviews, approvals, technical decisions, and site observations. Provide regular updates to Project Management regarding engineering progress, risks, and technical challenges. Support preparation of project closeout documentation, operation manuals, and asset handover requirements.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor's Degree in Mechanical Engineering or related Engineering discipline.</li><li>Master's Degree in Mechanical Engineering, Building Services Engineering, or Energy Systems is considered an advantage.</li><li>Minimum 10 years of experience in mechanical engineering design, design review, and construction supervision.</li><li>Proven experience on major airport, aviation, infrastructure, or large-scale transportation projects.</li><li>Strong experience in HVAC systems, central utilities, mechanical building services, plumbing systems, and mechanical equipment.</li><li>Experience delivering mechanical systems for: Passenger terminals. Cargo facilities. Airport operational buildings. Maintenance facilities. Critical infrastructure facilities.</li><li>Experience coordinating multidisciplinary engineering teams and stakeholders.</li><li>Strong knowledge of mechanical engineering principles, HVAC design, and building services systems.</li><li>Detailed understanding of airport mechanical infrastructure and operational requirements.</li><li>Knowledge of international standards including ASHRAE, NFPA, SMACNA, CIBSE, IPC, IMC, and local authority requirements.</li><li>Experience with HVAC design and analysis software such as HAP, Carrier, TRACE, or equivalent.</li><li>Familiarity with BIM platforms and multidisciplinary design coordination.</li><li>Strong technical review, problem-solving, and decision-making capabilities.</li><li>Excellent communication, leadership, and stakeholder management skills.</li><li>Ability to manage multiple priorities within a complex airport development environment.</li><li>Professional Engineer (PE), Chartered Engineer (CEng), or equivalent professional registration.</li><li>Experience on international airport expansion or greenfield airport development projects.</li><li>Knowledge of ICAO standards, aviation facility requirements, and airport operational systems.</li><li>Experience with airport central utility plants (CUP), district cooling systems, and energy management systems.</li><li>Experience with sustainable building solutions, energy efficiency strategies, and green building standards.</li><li>Experience working under FIDIC or similar international contract frameworks.</li><li>Experience supporting Design-Build, EPC, PMC, or Delivery Partner project delivery models.</li><li>Strong authority coordination and stakeholder management experience.</li></ul>