Network Engineer Jobs in Saudi

Requirements:Bachelor's degree in Automotive, Mechanical, Electrical, or Electronics Engineering, or a related field — fresh graduates are welcome to apply.0 to 2 years of relevant experience in automotive testing, validation, or a related engineering field. Genuine interest in automotive engineering, test and validation, and ADAS / connected vehicle technologies. Saudi national or holder of a valid, transferable Saudi Iqama. Basic understanding of vehicle electronics, ECUs, and ADAS sensor systems. Familiarity with automotive flashing tools, diagnostic software, or bench test equipment is a strong asset. Valid Saudi driving license, with the ability to operate test vehicles. Good command of the English language (spoken and written); Arabic is a plus. Strong analytical and problem-solving skills, with high attention to detail. Good documentation, reporting, and communication skills. Willingness to work flexible shifts and travel when required. Basic computer skills (MS Office) and willingness to learn test and reporting tools.<br>Responsibilities:Flash and configure ADAS sensors and ECUs according to project and test specifications. Perform bench testing of ADAS components, sensors, and vehicle control units. Conduct vehicle-level testing in accordance with assigned test plans and procedures. Operate ADAS test equipment (e.g., target simulators, calibration tools, data loggers, diagnostic tools). Prepare, execute, and accurately document test cases and test results. Safely operate test vehicles, adhering to all traffic laws and company safety standards. Identify, document, and report vehicle and system issues or anomalies encountered during testing. Support senior engineers in troubleshooting, root cause analysis, and validation of reported issues. Maintain test equipment, tools, and vehicles in proper working condition. Communicate test findings clearly and effectively with the engineering and project teams. Ensure compliance with assigned test schedules and shift timelines. Perform any other duties assigned by the Company related to the role.<br>What we offer you:Competitive entry-level salary with hands-on training and mentorship in automotive test and validation engineering. Direct exposure to cutting-edge ADAS and connected-vehicle technologies. Clear growth path from Junior to Senior Test Engineer within the team.

???? Urgent Hiring – Architectural / Finishing Engineers (2 Positions) Gypsum & Ceiling & Interior Finishing Works<br>Super Global Host Contracting Company is hiring 2 Architectural / Finishing Engineers.<br>Job Responsibilities:<br>Supervise suspended ceiling installation works. Coordinate with the site team and contractor. Ensure quality and progress according to approved drawings.<br>Requirements:<br>Bachelor's Degree in Architecture or Civil Engineering. Fresh graduates are welcome. Valid Iqama. Ready to join immediately.<br>Important:<br>✅ Ajeer Request must be accepted by both you and your Kafeel (Sponsor).<br>???? Apply via Whats App: +966 573796439

Job Overview:We are seeking a skilled Dev Sec Ops / Sovereign Cloud Engineer with 5-15 years of experience to design, operate, and secure regulated cloud environments across AWS and GCP. The role combines cloud operations, security engineering, and SRE practices, including Kubernetes management, Infrastructure as Code (Terraform), CI/CD automation (Git/Git Lab), and secrets management (Hashi Corp Vault). The ideal candidate will drive security incident response, platform reliability, observability (Datadog), and 24x7 incident management (Pager Duty), while embedding security-by-design principles, automation-first practices, and continuous improvement into sovereign cloud platforms. Strong expertise in cloud security, networking fundamentals, compliance-driven environments, and cross-functional incident leadership is essential.<br>Key Responsibilities:Deploy, manage and maintain the organization’s Sovereign Cloud strategy, ensuring compliance with regulatory and data residency requirements on AWS/GCP public cloud. Managing and operating Kubernetes clusters including upgrades, scaling, and workload optimization. Security Incident Response & Risk Mitigation – Investigate, analyze, and remediate cloud security incidents, proactively identifying and mitigating vulnerabilities within AWS environments. Secure Cloud Strategy & Continuous Improvement – Support and enhance the organization’s AWS cloud strategy by embedding security best practices and continuously improving the cloud security posture. Security Automation & Dev Sec Ops Enablement – Implement and tune security tools, automate policy-driven responses, and advocate Dev Sec Ops practices to ensure secure-by-design cloud operations. Implementing and managing Infrastructure as Code (Terraform) to provision, modify, and secure cloud resources. Maintaining and optimizing CI/CD pipelines using Git/Git Lab, ensuring secure and automated deployments. Managing secrets and secure access using Hashi Corp Vault, including token lifecycle, access policies, and secrets rotation. Troubleshooting complex infrastructure, networking, container, and performance issues across distributed systems. Observability & Reliability Engineering – Monitor system health and performance using Datadog, define and manage SLIs/SLOs, and drive continuous reliability improvements aligned with SRE principles. Incident Management & Operational Governance – Manage 24x7 alerting and incident response through Pager Duty, perform root cause analysis (RCA), and actively contribute to incident, problem, and change management processes. Cloud Security & Performance Optimization – Conduct proactive system hardening, vulnerability remediation, performance tuning, and capacity planning across cloud environments. Automation & Continuous Improvement – Develop automation using Python/Bash/Terraform/Ansible to reduce manual effort, improve operational efficiency, and strengthen platform resilience.<br>Knowledge, Skills and Experience:To succeed in this role, you must have:5–15 years of hands-on experience in Dev Sec Ops, SRE roles. Proven hands-on expertise managing Kubernetes clusters Experience with Terraform (IaC) Deployment, Git/Gitlab for CI/CD and version control for best practices Experience working with Hashi Corp Vault, Terraform, Datadog, Pagerduty, Confluence etc Strong understanding of Cloud Security principles (IAM, encryption, network security, container security, vulnerability management). Experience in incident management, change management, and root cause analysis processes. SRE & Automation Expertise – Strong understanding of SRE principles (SLIs, SLOs, error budgets, reliability metrics) with hands-on scripting experience in Python and/or Bash to drive automation-first practices. Networking & Compliance Knowledge – Solid grasp of networking fundamentals (TCP/IP, DNS, load balancing, firewalls, VPNs, private endpoints) with experience or exposure to regulated and compliance-driven environments. Leads incident bridges during P1/P2 outages, coordinating cross-functional teams and driving timely resolution with clear RCA. Maintains a strong customer and business-focused mindset while prioritizing tasks. Cloud certifications in a plus.<br>Also, You can forward your CV through below link for more upcoming Job vacancies:https://cv-fnrco.com

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>Adree is seeking a DevSecOps, Architect to support our product development by leveraging technical and analytical expertise to articulate the value of secure, scalable digital solutions.<br> In this role, you will work closely with stakeholders to understand business goals and technical requirements, and clearly demonstrate how target-state DevSecOps architecture and golden path standards can address their needs.<br> You will be responsible for bridging the gap between secure supply chain infrastructure and seamless delivery execution, collaborating across teams to craft exceptional enterprise platforms.<br> By blending infrastructure-as-code, GitOps workflows, automated security gates, and container orchestration, you will ensure our digital products are both highly resilient and fully auditable.<br> Key Roles and Responsibilities Engage with clients and stakeholders to gather requirements and understand their digital product goals.<br> Deliver impactful presentations, reference architectures, and documentation showcasing CI/CD pipelines, artifact lifecycles, and environment strategies.<br> Support the product and engineering teams in developing secure, high-availability Kubernetes and OpenShift clusters across private cloud environments.<br> Provide technical insights and DevSecOps expertise throughout the product lifecycle to drive pipeline patterns, Fortify gates, SBOM/SCA expectations, and Sigstore signing.<br> Collaborate with cross-functional teams (including security, testing, and product managers) to foster a DevOps culture and capture feedback to improve infrastructure offerings.<br> Stay current with industry trends, market changes, IaC standards using Terraform, and configuration standards via Ansible to position solutions effectively.<br> Conduct workshops, architectural reviews, and technical discussions internally and with clients to lead adoption waves and deprecate non-compliant delivery paths.<br> Participate in Agile development processes and team alignments, providing technical mentorship to engineers and ensuring smooth integrations with third parties.<br> Education Bachelor's degree in Computer Science, Software Engineering, Information Technology, or a related field.<br> Experience 10–15+ years of overall IT experience, with at least 5+ years dedicated to platform engineering or DevSecOps architecture.<br> Proven track record designing enterprise GitOps models using Argo CD into OpenShift or Kubernetes, including multi-environment promotion.<br> Demonstrated experience working within government, heavily regulated, or complex enterprise sectors is highly preferred.<br> Skills &amp; Competencies (Technical &amp; Analytical + Soft) Deep proficiency in enterprise DevSecOps platform design, secure supply chain management, and policy-as-code concepts.<br> Strong hands-on architectural knowledge of Azure DevOps Server, JFrog Artifactory, HashiCorp Vault, Terraform, and Ansible.<br> Expert command over automated testing integrations (e.<br>g., OpenText Service Virtualization, UFT One, UFT Digital Lab, LoadRunner).<br> Analytical skills to design monitoring and operational readiness architectures aligned with AppDynamics, BMC, and Azure Monitoring.<br> Strategic thinking, adoption leadership, and outstanding documentation skills to drive stakeholder alignment and pragmatic architectural trade-offs.<br> Experience (summary) Target-state DevSecOps reference architecture and golden path design.<br> Multi-environment GitOps deployment modeling using Argo CD into K8s/OpenShift.<br> End-to-end secure software supply chain implementation (Fortify, Sigstore, Vault).<br> Automated testing gate integration and virtualization orchestration.<br> Infrastructure-as-Code (IaC) and configuration management standardization.<br> Enterprise observability and monitoring architecture deployment.<br> Skills &amp; Competencies (summary) Azure DevOps Server &amp; JFrog Artifactory ecosystem.<br> Container orchestration (Kubernetes &amp; Red Hat OpenShift architecture).<br> Infrastructure-as-Code (Terraform &amp; Ansible automation).<br> Application security automation (SCA, SBOM, code signing).<br> Enterprise monitoring (AppDynamics / BMC / Azure Monitoring).<br> Stakeholder relationship management &amp; governance alignment.<br> Prioritization and adoption leadership.<br> Travel for client-facing activities.<br> Job Location: HQ</span> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> No experience required </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

Primary Purpose:Design, optimize, and implement efficient, cost-effective, and robust manufacturing systems, bridging the gap between R&D and full-scale production, ensuring new products can be made safely, reliably, and at high quality, meeting business goals and customer needs.<br>Key Accountabilities: Develop and optimize manufacturing processes to increase efficiency, reduce costs, and improve product quality. Design and conduct experiments and pilot studies to test and validate new process parameters. Evaluate and select new equipment and technologies to integrate into production lines. Analyze process data using statistical methods to identify trends, troubleshoot issues, and propose solutions. Lead continuous improvement initiatives and implement process improvements using methodologies like Lean and Six Sigma. Monitor production metrics and quality control data to ensure performance goals are met. Develop and implement standard operating procedures (SOPs) and other technical documentation. Ensure all processes comply with relevant industry, safety, and environmental regulations. Conduct risk assessments and ensure compliance with corporate standards. Collaborate with cross-functional teams (e.g., R&D, production, quality) to implement new processes and technologies. Provide training and technical support to production staff on new processes and procedures. Performs any work requested by the direct manager.<br>Education: Bachelor's degree in a related engineering field chemical or mechanical.<br> Experience+4 Years Experience In manufacturing processes, Industry Operations . Skills:Strong written and verbal communication skills are necessary for interacting with various teams and stakeholders. Several years of experience in process development or a similar role are required, often with a focus on scaling up processes and transferring them to production. Experience in a manufacturing environment is crucial for understanding operational needs and equipment. Proven experience in project management is essential for coordinating the development and implementation of new products and processes. Proficiency with software like Aspen Plus or HYSYS is highly valued. Knowledge of SPC and Design of Experiments (DOE) is important for data analysis and process optimization.

For one of our clients, we’re looking for an Applications Support Engineer to provide first-line support for business-critical applications, ensuring timely issue resolution and excellent user satisfaction in a shift-based environment.<br>Key Responsibilities Serve as the first point of contact for business users for application issues and requests Log, categorize, prioritize, and track incidents and service requests via ITSMPerform initial troubleshooting and identify root causes and resolutions Troubleshoot integrations, interfaces, and data flow between systems Analyze logs, errors, API responses, and traces to resolve production issues Escalate complex incidents to development / QA / infrastructure / vendors Monitor application performance and proactively identify risks to operations Support users across multiple shifts to ensure continuous service availability Validate fixes and enhancements before production deployment Support UAT, regression testing, and issue verification Maintain documentation (known errors, SOPs, knowledge base) Provide user guidance and training on application functionality and business processes Collaborate with stakeholders to drive improvement opportunities Ensure adherence to SLAs and support processes<br>Requirements At least 2 years of experience in Applications Support in Healthcare / health insurance / hospital environment. Experience supporting core business applications in production Exposure to HIS / EMR-EHR / healthcare applications Experience with customer-facing digital platforms and mobile apps Strong troubleshooting, analytical, and problem-solving skills Ability to work in a shift-based support model Experience with ticketing and ITSM tools Understanding of SDLC / testing lifecycles Basic knowledge of databases and SQLExcellent communication skills with both technical and non-technical stakeholders Strong customer service orientation and ownership mindset Arabic & English fluency (spoken and written) Familiarity with APIs, integrations, and interfaces

About Gulf Net Solutions (GNS) Founded in 1997, Gulf Net Solutions Company Limited (GNS) is a leading technology and engineering solutions provider headquartered in Dammam, Saudi Arabia. A wholly owned subsidiary of Ali Zaid Al Quraishi & Brothers (AZAQ), GNS delivers innovative solutions across automation, digital transformation, industrial communications, cybersecurity, and smart utility infrastructure throughout the GCC.<br>Job Summary We are seeking an experienced Senior Automation Engineer to support the execution, commissioning, and maintenance of automation systems for water utility projects across Saudi Arabia. The successful candidate will be responsible for site-based activities related to PLC, SCADA, RTU, and instrumentation systems while working closely with customers including the National Water Company (NWC) and Saudi Water Authority (SWA). The role requires strong technical expertise, field experience, troubleshooting capabilities, and direct interaction with customers during project execution and commissioning phases.<br>Key Responsibilities Lead site activities related to automation and control systems for water and wastewater projects. Perform installation, testing, commissioning, troubleshooting, and maintenance of PLC, SCADA, RTU, and instrumentation systems. Configure, program, and modify PLC and RTU applications as required for project execution. Support SCADA system integration, communication networks, and remote monitoring solutions. Conduct site surveys and assess automation system requirements. Supervise and coordinate field technicians and subcontractors during project implementation. Perform loop checking, I/O verification, FAT, SAT, and system commissioning activities. Diagnose control system faults and provide corrective actions to minimize downtime. Review and update project documentation including:I/O Lists Loop Diagrams As-Built Drawings FAT/SAT Reports Technical Reports O&M Manuals Ensure compliance with project specifications, customer requirements, and industry standards. Coordinate directly with clients and stakeholders during project execution and testing phases. Support project teams in preparing technical submittals and engineering documentation. Provide technical support and training to end users when required.<br>Required Qualifications Bachelor’s Degree in Electrical Engineering, Electronics Engineering, Instrumentation Engineering, or a related field. Minimum 7 years of experience in Automation and Control Systems, preferably within water and wastewater utility projects. Hands-on experience with PLC, SCADA, RTU, and instrumentation systems, including field devices and control panels. Experience working with Siemens, Schneider Electric (SE), SOFREL, or similar automation platforms. Strong knowledge of industrial communication protocols such as Modbus, Ethernet/IP, Profibus, Profinet, and DNP3. Proven experience in testing, commissioning, troubleshooting, and maintenance of automation and control systems. Ability to read and interpret P&IDs, control drawings, loop diagrams, and technical documentation. Previous experience working with National Water Company (NWC), Saudi Water Authority (SWA), or similar water utility clients is highly preferred. Strong communication, problem-solving, and customer-facing skills. Willingness to travel and work at project sites as required.<br>Preferred Experience Previous experience working with:National Water Company (NWC) Saudi Water Authority (SWA) Experience in water transmission, pumping stations, reservoirs, desalination, or wastewater facilities. Knowledge of telemetry and remote monitoring systems. Familiarity with cybersecurity considerations for industrial control systems.

We are seeking a Physical Security Engineer with 2–5 yearsof experience in physical security systems implementation, configuration, andsupport. The candidate will be responsible for designing, installing,integrating, testing, and maintaining security systems including CCTV, accesscontrol, and other physical security solutions.<br>Responsibilities<br>Design, configure, and support CCTV, access control, and physical security systems. Perform installation, testing, commissioning, and troubleshooting activities. Conduct site surveys and prepare technical documentation and reports. Support system integration activities and ensure compliance with project requirements and security standards. Coordinate with clients, vendors, and project teams for successful project execution. Perform security assessments and recommend improvements when required. <br>Qualifications Bachelor’s degree in engineering or related technical field.<br>2–5 years of experience in CCTV, access control, and physical security systems. Strong understanding of physical security technologies and system architecture. Mandatory certification or training certificate in the<br>following: CPP, APP, PSP, and Security Risk Assessment Methodology – API 780<br>Standard. Good communication and problem-solving skills.

About Gulf Net Solutions Founded in 1997, Gulf Net Solutions Company Limited (GNS) is a wholly owned subsidiary of Ali Zaid Al Quraishi & Brothers (AZAQ). Headquartered in Dammam, GNS provides consulting, engineering, and technology solutions across the GCC, specializing in industrial automation, information security, cloud computing, mobility, and digital transformation solutions.<br>About the Role The Senior Automation Engineer is responsible for the design, engineering, implementation, and commissioning of industrial automation and control systems projects. The role includes developing automation architectures, preparing engineering deliverables, ensuring compliance with client requirements and standards, and supporting project execution from concept through handover. The successful candidate will work closely with clients, project teams, vendors, and site personnel to deliver automation solutions for water and utility sector projects.<br>Responsibilities Engineering & Design Design and develop control and automation systems utilizing PLCs, SCADA, RTUs, and instrumentation systems. Develop control system architecture, network architecture, and automation system layouts. Prepare and review engineering deliverables including:P&IDsI/O Lists Instrument Lists Instrument Loop Diagrams (ILD) Control Narratives Functional Design Specifications (FDS) FAT & SAT Documents Scope of Work Documents Develop engineering design packages in accordance with project and client requirements. Review technical requirements, specifications, and standards to ensure compliance with end-user requirements. Specify and evaluate field instrumentation, control valves, analyzers, PLCs, RTUs, SCADA systems, and communication networks. Project Execution Lead and execute medium to large-scale automation projects from engineering through commissioning. Conduct site surveys, technical assessments, and system evaluations. Support installation, testing, and commissioning activities. Coordinate with supervisors, technicians, vendors, and subcontractors to ensure successful project delivery. Review and comment on automation and instrumentation design documents. Technical Support Provide technical support and engineering solutions for automation and control systems. Diagnose technical issues and recommend corrective actions. Program and configure PLCs, RTUs, HMI, and SCADA applications when required. Participate in FAT, IFAT, SAT, and commissioning activities. Lead technical discussions with clients during engineering reviews and acceptance testing. Customer & Quality Focus Ensure project deliverables meet customer expectations, quality requirements, and schedule commitments. Maintain compliance with client specifications, project standards, and industry best practices. Support technical meetings and coordination with clients and stakeholders throughout project execution. Reporting Prepare and maintain all project engineering and site documentation. Develop and submit site survey reports, testing reports, commissioning reports, FAT reports, and SAT reports. Monitor project progress and provide technical updates to project management.<br>Qualifications Bachelor's Degree in Electrical Engineering, Electronics Engineering, Instrumentation Engineering, or a related discipline. Minimum 7 years of experience in Automation and Control Systems Engineering. Strong knowledge and hands-on experience in PLCs, SCADA, RTUs, Instrumentation Systems, Industrial Communication Networks, and Control System Architecture Design. Proven experience in developing technical specifications, P&IDs, engineering drawings, system layouts, and scope of work documents. Experience in water, wastewater, utility, or infrastructure projects, with exposure to NWC projects considered an advantage. Knowledge of Rockwell, Siemens, Schneider, and other major automation platforms, as well as relevant international standards.<br>Technical Knowledge Rockwell Automation (Studio 5000, Factory Talk, RSLogix, Control Logix, Compact Logix). Siemens (TIA Portal, S7, Win CC). Schneider Electric (Eco Struxure / Unity Pro). Wonderware / AVEVA SCADA platforms. Knowledge of ANSI, NEMA, IEC, UL, and NEC standards. Understanding of FAT, SAT, Testing & Commissioning procedures.

About Gulf Net Solutions (GNS) Founded in 1997, Gulf Net Solutions Company Limited (GNS) is a leading solutions provider headquartered in Dammam, Saudi Arabia. As a wholly owned subsidiary of Ali Zaid Al Quraishi & Brothers (AZAQ), GNS delivers consultation, solutions, services, and manpower across various technology and infrastructure sectors throughout the GCC. About the Role We are seeking an experienced Senior Project Engineer to manage water projects for the National Water Company (NWC). The successful candidate will be responsible for managing the full project lifecycle, including planning, scheduling, milestone tracking, progress monitoring, reporting, and coordination with project stakeholders. The role requires strong project management experience, expertise in Primavera P6 and Microsoft Project, and a proven track record in similar water projects. Responsibilities Manage water projects throughout the full project lifecycle from initiation to project closeout. Develop, maintain, and monitor project schedules using Primavera P6 and Microsoft Project. Track project milestones, deliverables, and overall project progress. Prepare weekly and monthly project progress reports. Monitor project performance and recommend corrective actions when required. Coordinate with clients, consultants, contractors, and internal project teams. Follow up on project execution activities and ensure alignment with approved schedules and project objectives. Attend project meetings and provide regular status updates to stakeholders. Support project planning, resource allocation, and project control activities. Identify project risks and delays and support mitigation plans. Ensure project documentation and reporting requirements are maintained throughout the project lifecycle. Monitor contractor performance and follow up on project deliverables.<br>Qualifications Bachelor's Degree in Engineering or a related field. Minimum 7-10 years of experience in managing similar water projects. Proven experience working on projects with the National Water Company (NWC). Strong experience in project planning, scheduling, milestone management, progress monitoring, and reporting. Expert proficiency in Primavera P6 and Microsoft Project. Experience managing contractors, consultants, and project stakeholders. Strong communication, coordination, and organizational skills.

Structural Engineer | Civil Engineering | Dammam, Saudi Arabia Location: Dammam, Saudi Arabia Salary: Up to SAR 11,000 per month Saudi Nationals Only<br>Are you a Structural Engineer looking to develop your career with one of Saudi Arabia's leading precast concrete manufacturers?<br>We're looking for a motivated engineer to join a growing technical team responsible for delivering structural designs on major construction projects across the Kingdom. Please note: This opportunity is only suitable for candidates who meet the following essential requirements:<br>Bachelor's Degree in Civil Engineering (Mandatory) Previous experience as a Structural Engineer (Mandatory) Unfortunately, candidates without both requirements will not be considered.<br>The Opportunity This is an excellent opportunity to become part of a highly respected engineering team where you'll be involved throughout the complete precast design process—from reviewing client drawings and carrying out structural calculations through to supporting production and site erection.<br>You'll work closely with clients, consultants, production teams and site engineers to deliver innovative structural solutions for high-profile projects across Saudi Arabia.<br>Key Responsibilities Review structural drawings and project specifications. Prepare structural calculations and engineering designs. Produce and coordinate precast structural designs. Liaise with clients and consultants to obtain technical approvals. Support production teams with technical clarifications. Assist site erection teams to ensure successful installation. Work with ETABS and other structural analysis software.<br>What We're Looking For Bachelor's Degree in Civil Engineering. Previous experience as a Structural Engineer. Experience with reinforced concrete or precast concrete structures. Knowledge of structural analysis and design software (ETABS or similar). Strong understanding of structural design principles and engineering standards. Excellent attention to detail and problem-solving skills.<br>Why Join?✔ Join one of Saudi Arabia's leading precast concrete manufacturers.✔ Work on landmark construction and infrastructure projects.✔ Excellent long-term career development.✔ Salary of up to SAR 11,000 per month.✔ Based in Dammam, Saudi Arabia.

We are looking for a highly motivated Dev Ops Engineer to join our fully remote engineering team. The ideal candidate will have strong experience building and maintaining cloud infrastructure, Kubernetes environments, CI/CD pipelines, Infrastructure as Code (IaC), and modern Dev Ops practices. You will work closely with software engineers, architects, and security teams to deliver reliable, scalable, and secure cloud-native solutions. This position is ideal for engineers who enjoy automation, continuous improvement, cloud infrastructure, and solving complex production challenges.<br>Key Responsibilities Design, implement, and maintain scalable cloud infrastructure. Manage and administer Kubernetes clusters in production environments. Build, maintain, and optimize CI/CD pipelines using modern Dev Ops tools. Automate infrastructure provisioning using Infrastructure as Code (Terraform, Ansible). Deploy and manage containerized applications using Docker and Kubernetes. Implement Git Ops deployment strategies using Argo CD or similar tools. Monitor infrastructure health using Prometheus, Grafana, ELK Stack or equivalent monitoring solutions. Ensure infrastructure security, availability, backup, disaster recovery, and compliance. Troubleshoot production incidents and optimize system performance. Collaborate with software engineering teams to improve deployment processes and release automation. Support cloud migrations and cloud infrastructure optimization. Implement best practices for networking, security, scalability, and automation. Document infrastructure architecture, deployment procedures, and operational runbooks.<br>Requirements Must Have4+ years of experience as a Dev Ops Engineer, Cloud Engineer, or Site Reliability Engineer. Strong Linux system administration experience. Hands-on experience with Kubernetes in production. Excellent knowledge of Docker and containerization. Experience building CI/CD pipelines. Strong Infrastructure as Code experience using Terraform. Experience with Git, Git Hub Actions, Git Lab CI, or Jenkins. Experience managing cloud infrastructure (AWS, Azure, GCP, Oracle Cloud, or Digital Ocean). Experience with monitoring and logging tools. Good understanding of networking fundamentals. Experience implementing infrastructure security best practices. Strong scripting skills (Bash, Python, or similar). Experience working within Agile teams. Strong troubleshooting and problem-solving skills. Excellent written and spoken English.<br>Nice to Have Oracle Cloud Infrastructure (OCI) Argo CD (Git Ops) Hashi Corp Nomad Consul Elasticsearch / Logstash / Kibana (ELK) Prometheus Kafka VMware Active Directory integration Cloud migration experience Microservices architecture Security hardening Experience supporting banking, government, or enterprise platforms

Job Position: After Sales Engineer Location: Dammam, Saudi Arabia Job Summary The After Sales Engineer will support customers through after-sales service delivery, coordinate service activities, follow up on customer requests, maintain accurate records, and ensure the timely resolution of technical and operational issues. Key Responsibilities Provide technical support to customers and resolve issues efficiently. Manage and follow up on service, maintenance, warranty, and AMC requests. Coordinate with customers and internal teams to ensure timely job completion. Maintain accurate service records, reports, and system updates. Provide customer training on product or system usage when required. Build and maintain strong customer relationships. Identify opportunities to improve service delivery and increase after-sales revenue through spare parts, upgrades, and service contracts. Ensure compliance with company policies, quality standards, and safety procedures. Visit customer sites and perform additional assigned duties when required. Requirements Bachelor's degree in Engineering or a relevant technical field. Fresh graduate or up to one year of relevant experience. Basic knowledge of diesel generators and electrical/mechanical troubleshooting. Good communication, customer service, problem-solving, and multitasking skills. Very good command of English and proficiency in Microsoft Office. Ability to work under pressure and visit customer sites when required. Experience:‏-Fresh Graduate or 0-1 experience If you are interested, please send your CV with the subject (After Sales Engineer) to the following email address: human.resource@hpi-sa.com

We’re Hiring: Fit-out Senior Site Engineer ????️✨???? Location: Saudi Arabia<br>Baseel United is seeking an experienced and detail-oriented Fit-out Senior Site Engineer to join our execution team in Saudi Arabia. The ideal candidate will be responsible for leading site operations, ensuring high-quality interior fit-out execution, and delivering projects within budget and schedule.<br>Key Responsibilities:▫️ Oversee and manage day-to-day site operations for high-end interior fit-out projects.▫️ Supervise site engineers, subcontractors, and site labor to ensure work complies with approved shop drawings and specifications.▫️ Coordinate with structural, MEP, and other engineering disciplines to ensure integrated project delivery.▫️ Coordinate material delivery, site logistics, and installation processes to ensure project timelines are met.▫️ Inspect execution quality, resolve technical site issues, and ensure strict compliance with HSE standards.▫️ Conduct regular progress reviews and coordinate closely with project managers, consultants, and clients.▫️ Monitor work as per drawing specifications and Bill of Quantities (BOQ).▫️ Review materials delivered to the site for conformance with approved samples, materials, and equipment.▫️ Manage daily, weekly, and monthly project progress reports.<br>Key Requirements:▫️ Education: Bachelor’s degree in Civil or Architectural Engineering.▫️ Experience: 5–7 years of professional site execution experience with a strong background in Fit-out and Finishing projects (Construction experience is preferred).<br>▫️ Technical & Software Skills:▪️ Proficiency in Auto CAD (Mandatory).▪️ Strong ability to coordinate across disciplines (Civil, Architectural, and MEP) on-site.▪️ Deep understanding of BOQs, shop drawings, finishing details, and material submittals.<br>▫️ Key Competencies: Strong site leadership, progress reporting, quality monitoring, and problem-solving skills.

<p>As a frontend engineer, you’ll work at the intersection of powerful systems and real users, turning complex capabilities like AI-driven features, real-time data, and advanced services into intuitive, responsive, and polished user experiences. Your day-to-day might range from building scalable UI architecture and refining design systems to integrating interactive elements such as chat interfaces, dashboards, and intelligent workflows, always with a strong focus on performance, usability, and clarity. If you enjoy translating complex ideas into simple, elegant, and production-ready interfaces while collaborating closely with designers and backend engineers, you’ll feel right at home here. Responsibilities: • Own frontend technical direction across major product areas. • Define scalable architecture, standards, and quality frameworks. • Lead ambiguous, high-impact initiatives from design to production. • Drive decisions across performance, reliability, accessibility, and maintainability. • Build shared foundations that improve engineering velocity. • Set the bar through architecture reviews, testing strategy, and production readiness. • Identify systemic risks and drive technical improvements. • Ensure frontend systems support scale, resilience, and long-term growth. • Recommended hands-on experience with at least one frontend framework (i.e. Next.js, Vue.js, etc.). • Mentor rising developers, providing guidance and support. • Foster a collaborative team environment. • Influence engineering, product, design, and platform strategy.</p><p>Required Qualifications: - Strong understanding of programming fundamentals and web technologies. Good problem-solving and analytical thinking skills. Ability to work effectively in a team and communicate clearly. Eagerness to learn new technologies and adapt to changing requirements. Good attention to detail, time management, and commitment to delivering high-quality work. - Saudi National who is holding Bachelor's degree in Computer Science, Computer Engineering, Software Engineering, Information Technology, or a related field.</p>

Join Our Growing Team.. Nema Supply in Jeddah, Saudi Arabia is looking for a results-driven MEP Sales Engineer to join the team. The ideal candidate is a motivated sales professional with a strong technical background in Mechanical, Electrical, and Plumbing (MEP) systems, excellent relationship-building skills, and a proven ability to identify and secure new business opportunities.<br>Key Responsibilities:Develop and execute sales strategies to achieve revenue and profitability targets. Identify and pursue new business opportunities across commercial, industrial, and infrastructure sectors. Build and maintain strong relationships with consultants, contractors, developers, government entities, and end users. Promote and sell MEP products, systems, and engineering solutions. Prepare technical and commercial proposals, quotations, and tender submissions. Conduct technical presentations and product demonstrations to clients. Review project specifications, drawings, and BOQs to identify sales opportunities. Negotiate commercial terms and successfully close sales agreements. Coordinate with engineering, procurement, and project teams to ensure smooth project execution. Monitor market trends, competitor activities, and customer requirements. Maintain an active sales pipeline and provide regular sales forecasts and reports.<br>Requirements:Bachelor's degree in Mechanical Engineering (Preferred). 3–7 years of experience in MEP sales, technical sales, or business development. Strong knowledge of MEP systems and construction industry practices. Ability to read engineering drawings, specifications, and BOQs. Excellent communication, negotiation, and presentation skills. Self-motivated with a strong customer focused approach. Valid driving license (preferred).<br>Core Sales Capabilities:Business Development & Lead Generation. Consultative & Solution Selling. Proposal Preparation & Cost Analysis. Contract Negotiation & Closing. Market Intelligence & Competitor Analysis. Customer Relationship Management (CRM). Strategic Planning & Revenue Growth.<br>What We Offer:Competitive salary and excellent attractive performance based commission. Career growth and professional development opportunities. Supportive and collaborative work environment.

Job Title: Lead Production Engineer. Location: Riyadh, Saudi Arabia Company: WETICO<br>Role Purpose:Lead a team of production engineers and coordinate the technical execution of fabrication, welding and assembly works for oil & gas, petrochemical and water-treatment packages, ensuring compliance with drawings, WPS, Aramco and international codes, and driving productivity and quality.<br>Key Responsibilities:Coordinate and supervise the work of production engineers across fabrication areas. Translate drawings and specifications into executable job packs and cutting/fit-up plans. Ensure welding and fabrication follow approved WPS/PQR and Aramco/ASME/API/AWS codes. Plan and sequence production activities to meet schedule and optimize resources. Monitor progress, productivity and rework and resolve technical execution issues. Interface with QC on inspection stages, NDT and dimensional control. Prepare and review method statements, ITPs and technical calculations. Support man-hour estimation and material take-off for planning and costing. Enforce HSE requirements and safe execution methods. Drive 5S, Lean and continuous improvement on production lines. Investigate non-conformities and implement corrective/preventive actions. Mentor and develop junior production engineers. Report technical progress and issues to the Production Manager. Any additional duties assigned within the scope of the role.<br>Qualifications & experience:Bachelor's degree in Mechanical / Production Engineering. CSWIP / CWI welding certification is an advantage. Strong knowledge of welding and NDT.8+ years in fabrication production engineering. Team-lead experience. Oil & gas / Aramco project experience.<br>Skills:Production engineering sequencing. Code & specification compliance. Welding & fabrication expertise. Engineering drawing & blueprint reading. Team leadership & mentoring. HSE awareness and safe work practices. Problem-solving & analytical thinking. Time management & organization. Teamwork & cooperation. Attention to detail & accuracy. Communication & reporting skills.

Job Title: Senior Structural Engineer Location: Saudi Arabia (Jeddah / Riyadh) Industry: Solar Energy | Renewable Energy | Utility-Scale Solar PV | Engineering About the Role We are seeking a highly motivated Senior Structural Engineer to join our Engineering team and support the design and execution of utility-scale Solar PV projects. The successful candidate will be responsible for structural analysis, steel structure design, foundation engineering, value engineering, and construction support while collaborating with multidisciplinary teams across Engineering, Sales, Project Management, and R&D. Key Responsibilities Perform structural analysis and design for utility-scale solar PV tracker systems. Calculate structural loads, including dead, live, wind, seismic, and other environmental loads. Design steel structures, foundations, and structural connections in accordance with international design standards. Conduct manual design calculations and validate engineering models. Coordinate with geotechnical, civil, and project teams to deliver optimized structural solutions. Support construction activities by responding to RFIs, technical queries, and site engineering requirements. Participate in value engineering initiatives to improve cost, quality, and project efficiency. Develop engineering automation tools using VBA or Python to enhance design productivity. Collaborate with global engineering teams to ensure compliance with company standards and best practices. Qualifications Bachelors / Master's Degree in Structural Engineering.3–5 years of experience in structural design, preferably in steel structures or renewable energy projects. Experience with STAAD Pro, ETABS, SAP2000, RISA, or similar structural analysis software. Strong knowledge of structural design codes, seismic analysis, steel structures, and foundation engineering. Experience with ASCE, ACI, AISI, Eurocode, IS Codes, or equivalent international standards. Knowledge of VBA or Python is an advantage. Experience in utility-scale Solar PV, infrastructure, or industrial projects is preferred. Skills & Competencies Structural Analysis & Steel Design Foundation Engineering Wind & Seismic Analysis

Job Title: Senior Geotechnical Engineer Location: Saudi Arabia (Jeddah) Company: SBU of Abunayyan Holding Company Industry: Solar Energy | Renewable Energy | Utility-Scale Infrastructure | Engineering About the Role We are looking for an experienced Senior Geotechnical Engineer to join our Engineering team and support the successful delivery of utility-scale Solar PV and infrastructure projects. The successful candidate will lead geotechnical investigations, foundation design, corrosion assessments, and construction support while working closely with Engineering, Project Management, Sales, Supply Chain, and global technical teams. Key Responsibilities Lead the review and interpretation of geotechnical investigation reports and site soil data. Analyze soil and rock conditions to determine geotechnical design parameters. Design and review shallow and deep foundation systems, including pile foundations, for utility-scale projects. Perform foundation analysis using L. PILE and other engineering software. Conduct corrosion assessments and recommend suitable foundation and steel pile protection systems. Prepare and review geotechnical and foundation design reports in accordance with international standards. Review pile load testing methodologies, witness testing activities, and validate test results. Collaborate with Engineering, Supply Chain, Project Management, and global technical teams to optimize foundation designs. Support value engineering initiatives to improve project cost, constructability, and performance. Provide technical guidance to junior engineers and support construction teams by resolving geotechnical issues during project execution. Participate in technical discussions with clients, consultants, and contractors throughout the project lifecycle. Qualifications Bachelors / Master's Degree in Geotechnical Engineering or a related discipline.5–10 years of experience in geotechnical engineering and foundation design. Experience in renewable energy, utility-scale infrastructure, or industrial projects. Technical Skills Geotechnical Investigation & Site Assessment Soil Mechanics & Foundation Engineering Shallow & Deep Foundation Design Pile Foundation Design Pile Load Testing & Interpretation Corrosion Assessment L. PILE Software SPT, CPT & DCPT Interpretation Settlement & Bearing Capacity Analysis International Geotechnical Design Standards STAAD. Pro, RISA, or other FEM software (Preferred) VBA or Python (Preferred) Core Competencies Technical Leadership Analytical & Problem-Solving Skills Engineering Design Excellence

Mane Contract Services is currently recruiting for experienced B1 Licensed Aircraft Engineers with a valid EASA Part-66 Licence and Airbus A330 (CF6) type rating for an ongoing contract based in Jeddah, Saudi Arabia. This is an excellent opportunity to join a well-established maintenance operation on a long-term contract with a competitive package and full logistical support. Contract Details:Start: ASAPOngoing contract€480 per day Rotation: 30 Days On / 15 Days Off8–12 hours per day Apartment provided All flights provided Local transport provided Visa organised by the end client Role Responsibilities:Perform scheduled and unscheduled maintenance on Airbus A330 (CF6) aircraft. Certify maintenance activities in accordance with EASA Part-145 requirements. Diagnose and rectify aircraft defects while maintaining the highest safety standards. Complete all maintenance documentation accurately and in a timely manner. Ensure compliance with company procedures and aviation regulations. Work effectively as part of a professional maintenance team. Requirements:Valid EASA Part-66 B1 Licence. Airbus A330 (CF6) type rating. Recent certifying experience on the A330 (CF6). Strong troubleshooting and defect rectification experience. Good command of the English language. Eligible to obtain the required work visa for Saudi Arabia.