Mechanical Engineering Jobs in Saudi

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>1. Mechanical Maintenance and Repair Activities Perform planned preventive, predictive, corrective, and breakdown maintenance activities on assigned mechanical equipment.<br> Carry out daily inspections, running checks, and maintenance checklists in accordance with approved maintenance schedules.<br> Monitor the physical condition of equipment and report abnormalities, non-conformances, and developing defects to the Mechanical Maintenance Engineer.<br> Troubleshoot mechanical failures using approved tools, drawings, manuals, and diagnostic techniques to identify the cause and carry out necessary repairs.<br> Perform dismantling, inspection, cleaning, repair, replacement, reassembly, alignment, and functional testing of mechanical equipment and components.<br> Replace defective parts such as bearings, seals, gaskets, O-rings, gland packing, couplings, bolts, filters, strainers, belts, and lubrication-system components.<br> Perform adjustment, alignment, tightening, lubrication, greasing, oil top-up, oil changing, and cleaning activities in accordance with approved procedures.<br> Identify and report corrosion, cracks, leaks, overheating, vibration, abnormal noise, misalignment, loose bolts, damaged insulation, and other equipment defects.<br> Ensure the working area is clean, safe, and properly restored after completion of maintenance activities.<br> v Support maintenance, inspection, and repair of mechanical equipment including, but not limited to: Siemens 9000HL-Class gas turbine auxiliaries, including lube oil, hydraulic oil, fuel gas, inlet air, ventilation, and turning gear systems.<br> Steam turbine auxiliaries, including lube oil, gland steam, seal oil, condensate, cooling, and turning gear systems.<br> Heat Recovery Steam Generator (HRSG), including drums, valves, blowdown systems, expansion joints, and associated auxiliary equipment.<br> Pumps, including boiler feedwater pumps, condensate extraction pumps, closed cooling water pumps, service water pumps, fire water pumps, fuel oil pumps, chemical dosing pumps, and drainage pumps.<br> Compressors, blowers, fans, air handling units, ventilation fans, and instrument/service air compressor systems.<br> Valves, including gate, globe, check, control, safety Valves.<br> Water treatment, reverse osmosis, condensate polishing, chemical dosing, wastewater treatment, and other balance-of-plant mechanical equipment.<br> 2. Inspection, Testing, and Troubleshooting Conduct routine inspections and condition assessments of assigned mechanical equipment.<br> Use approved maintenance and diagnostic tools such as vibration meters, infrared thermometers, laser alignment tools, dial gauges, feeler gauges, torque wrenches, pressure gauges, vernier calipers, and micrometers.<br> Assist in vibration monitoring, alignment checks, bearing inspections, pump performance checks, valve testing, pressure testing, leak testing, and functional testing.<br> Record inspection findings, test readings, equipment condition, defects identified, and maintenance work completed.<br> Assist in identifying the root cause of equipment failures and support implementation of corrective actions.<br> Monitor repeated failures and report recommendations for repair, modification, replacement, or maintenance-plan improvement.<br> Support basic welding, fabrication, and workshop repair activities.<br> Participate in planned shutdowns, major outages, overhauls, commissioning activities, warranty works, and emergency repairs.<br> 3. Safety, Permit-to-Work, and Compliance Follow all applicable safety rules, permit-to-work requirements, lockout/tagout procedures, confined-space-entry requirements, lifting procedures, and site safety standards.<br> Verify that equipment is properly isolated, depressurized, drained, vented, cooled down, and released for maintenance before starting work.<br> Use required personal protective equipment, approved tools, lifting equipment, and safety devices at all times.<br> Participate in toolbox talks, risk assessments, safety observations, hazard reporting, audits, and incident investigations.<br> Immediately report unsafe conditions, leaks, damaged tools, lifting hazards, near misses, and incidents.<br> Follow environmental and waste-management requirements, including proper identification, handling, segregation, and disposal of waste materials.<br> Ensure maintenance work complies with approved site procedures, OEM requirements, quality standards, and EHS requirements.<br> 4. Documentation and CMMS Support Complete maintenance checklists, inspection sheets, work completion records, test reports, and defect reports accurately.<br> Provide clear feedback to the Mechanical Maintenance Engineer regarding work completed, materials used, defects found, and follow-up actions required.<br> Support work-order completion, man-hour recording, and equipment-history updates in the CMMS.<br> 5. Spare Parts, Tools, and Housekeeping Review assigned work orders and identify the required spare parts, consumables, tools, lifting equipment, and test instruments before starting work.<br> Check availability of spare parts and coordinate with the warehouse storekeeper for material collection and return.<br> Maintain mechanical hand tools, power tools, lifting tools, portable test instruments, and workshop equipment in good working condition.<br> Report shortages of spare parts, consumables, special tools, and defective equipment to the Mechanical Maintenance Engineer.<br> Maintain good housekeeping in workshops, equipment areas, stores, and maintenance locations.<br> 6. Coordination, Training, and Continuous Improvement Work closely with Mechanical Maintenance Engineers, Operations personnel, Electrical and I&amp;C teams, contractors, OEM representatives, and other site personnel.<br> Support Operations during equipment isolation, release for maintenance, testing, start-up, and return-to-service activities.<br> Assist other departments in troubleshooting and repair activities when required.<br> Support training and mentoring of junior technicians,, and newly joined maintenance personnel.<br> Participate in continuous-improvement initiatives, maintenance improvement programs, 5S activities, and hazard-reporting programs.<br> Education Mechanical Diploma, Mechanical Technology, or an equivalent discipline.<br> Mechanical trade certifications is preferred.<br> Training in rigging, lifting operations, Forklift operator, and safety courses is an advantage.<br> Experience Minimum 5 years of mechanical maintenance experience in a power plant, heavy industrial facility, oil and gas plant, desalination plant, petrochemical plant.<br> Combined cycle power plant experience is preferred.<br> Technical Knowledge Knowledge of mechanical systems used in combined cycle power plants.<br> Knowledge of gas turbines, steam turbines, HRSG systems, pumps, valves, compressors, fans, blowers, heat exchangers, filters, strainers, and piping systems.<br> Understanding of lube oil, hydraulic oil, fuel gas, fuel oil, cooling water, condensate, boiler feedwater, compressed air, and water-treatment systems.<br> Knowledge of rotating-equipment maintenance practices, including bearing inspection, lubrication, seal replacement, coupling alignment, and vibration awareness.<br> Familiarity with valve maintenance, including gland packing, seat leakage, Lapping, and basic valve overhaul activities.<br> Understanding of lifting and rigging, torque tightening, mechanical assembly, and use of lifting tools.<br> Knowledge of permit-to-work, lockout/tagout, confined-space entry, lifting operations, and general mechanical safety requirements.<br> Practical Skills Ability to use maintenance diagnostic tools such as vibration meters, infrared thermometers, pressure gauges, and tachometers.<br> Basic computer skills for CMMS andwork-order updates, maintenance records, and reporting.<br> Good working knowledge of written and spoken English.<br> Good communication, teamwork, and coordination skills.<br> Willingness to work during planned outages, emergency breakdowns, shift duties, and on-call assignments when required</span> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> No experience required </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>In a world of possibilities, pursue one with endless opportunities. Imagine Next! At Parsons, you can imagine a career where you thrive, work with exceptional people, and be yourself. Guided by our leadership vision of valuing people, embracing agility, and fostering growth, we cultivate an innovative culture that empowers you to achieve your full potential. Unleash your talent and redefine what s possible.</p><p><strong>What You'll Be Doing:</strong></p><ul><li>Provide technical leadership and specialist engineering support within the assigned discipline (Electrical, Mechanical, ELV, or Operations).</li><li>Review and validate engineering designs, technical submissions, specifications, and commissioning documentation.</li><li>Support the preparation, review, and technical validation of the Operational Preparedness Report (OPR).</li><li>Ensure engineering deliverables comply with project requirements, applicable codes, international standards, and client specifications.</li><li>Coordinate with design consultants, contractors, commissioning teams, and client representatives to resolve technical issues.</li><li>Participate in design reviews, constructability reviews, risk assessments, and value engineering initiatives.</li><li>Monitor construction and commissioning activities to ensure compliance with approved designs, quality standards, and project schedules.</li><li>Identify engineering risks and recommend mitigation measures to maintain project objectives.</li><li>Support Testing &amp; Commissioning planning, execution, and system readiness activities.</li><li>Ensure all engineering activities are performed in accordance with Parsons Quality Management System (QMS), Health, Safety &amp; Environment (HSE) requirements, and project procedures.</li><li>Review contractor method statements, inspection and test plans (ITPs), commissioning procedures, and operational documentation.</li><li>Provide technical guidance and mentoring to junior engineers and multidisciplinary project teams.</li><li>Participate in meetings with the client, stakeholders, consultants, and contractors to provide technical recommendations and engineering solutions.</li><li>Contribute to continuous improvement initiatives, lessons learned, and engineering best practices.</li></ul><p><strong>What Required Skills You'll Bring:</strong></p><ul><li>Bachelor's degree in Electrical Engineering, Mechanical Engineering, Engineering, or a related scientific discipline from an accredited institution.</li><li>Additional certifications in Testing &amp; Commissioning, Project Management, or Construction Management are advantageous.</li><li>10 -15 years of professional engineering experience.</li><li>Demonstrated experience on large-scale infrastructure, mixed-use, hospitality, or mega projects.</li><li>Previous experience as a Testing &amp; Commissioning Engineer on major projects.</li></ul><p><strong>What Required Skills You'll Bring:</strong></p><ul><li>Professional registration or chartered status is preferred.</li><li>Experience working within a Project Management Consultant (PMC) environment is highly desirable.</li><li>Previous experience with internationally recognized engineering or consulting organizations is preferred.</li></ul><p><br></p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Strong knowledge of engineering design principles and construction methodologies.</li><li>Thorough understanding of Testing &amp; Commissioning processes and operational readiness.</li><li>Knowledge of international engineering codes, standards, and best practices.</li><li>Experience reviewing engineering calculations, technical reports, shop drawings, and material submittals.</li><li>Familiarity with multidisciplinary engineering coordination.</li><li>Strong understanding of project construction sequencing and site execution.</li><li>Knowledge of project controls, procurement, contract administration, quality management, and risk management.</li><li>Working knowledge of HSE regulations and zero-incident project delivery philosophy.</li><li>Understanding of Construction Environmental Control Plans and environmental compliance requirements.</li><li>Knowledge of Six Sigma principles and continuous improvement methodologies is an advantage.</li><li>Bachelor's degree in Electrical Engineering, Mechanical Engineering, Engineering, or a related scientific discipline from an accredited institution.</li><li>Additional certifications in Testing &amp; Commissioning, Project Management, or Construction Management are advantageous.</li><li>10 -15 years of professional engineering experience.</li><li>Demonstrated experience on large-scale infrastructure, mixed-use, hospitality, or mega projects.</li><li>Previous experience as a Testing &amp; Commissioning Engineer on major projects.</li><li>Professional registration or chartered status is preferred.</li><li>Experience working within a Project Management Consultant (PMC) environment is highly desirable.</li><li>Previous experience with internationally recognized engineering or consulting organizations is preferred.</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><br><p> </p> <p> </p> <p> <u> <b>Job Description:</b> </u> </p> <p>Parsons is looking for an amazingly talented <b>Associate Civil Engineer (Saudi National) </b>to join our Team!</p> <p> </p> <p> <b>What You'll Be Doing:</b> </p> <ul> <li> <p>Learn and Performs a variety of civil engineering duties by applying basic engineering techniques and analyses within one discipline. The Engineer at this level is in a developmental mode, being trained under close supervision in the utilization of engineering theories and practices, and gaining exposure to Company procedures. Assignment may be to a structured rotational program which would include experience in Project Controls, Procurement, and Construction Management, as well as through several disciplines in Engineering. Some assignments involve CAE (computer aided engineering)/CAD (computer aided design) applications. Willingness to travel or relocate to supplier, client, or construction site locations is expected.</p> </li> </ul> <p> </p> <p> <b>What Required Skills You'll Bring:</b> </p> <ul> <li> <p> Bachelor's Degree in Civil/Engineering (or related field) and typically 0+ years of related work experience.</p> </li> <li> <p>Excellent Communication Skills in both Arabic and English</p> </li> </ul> <p> </p> <p> <b>What Desired Skills You'll Bring:</b> </p> <ul> <li> <p> Requires basic engineering knowledge in electrical, mechanical, civil, or a related field.</p> </li> <li> <p>Familiarity with CAD and other PC software packages typically associated with engineering is also required.</p> </li> </ul> <p> </p> <p> </p> <p> </p> <p> </p> <p> </p> <p> </p> <p> </p> <p> </p>Parsons equally employs representation at all job levels no matter the race, color, religion, sex (including pregnancy), national origin, age, disability or genetic information.<p> </p> <p> </p> <p>We truly invest and care about our employee s wellbeing and provide endless growth opportunities as the sky is the limit, so aim for the stars! Imagine next and join the Parsons quest APPLY TODAY!</p> <p> </p> <p> </p> <p>Parsons is aware of fraudulent recruitment practices. To learn more about recruitment fraud and how to report it, please refer to<span> </span> <span>https://www.parsons.com/fraudulent-recruitment/</span> .</p></div></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><span><span><strong>Superintendent, Mechanical</strong></span></span></p><br><p><span><span><strong>Job Title</strong></span></span></p><br><p><span><span>Superintendent, Mechanical&nbsp;</span></span></p><br><p><span><span><strong>Reporting to</strong></span></span></p><br><p><span><span>Manager, Maintenance Mechanical</span></span></p><br><br><p><span><span><strong>Business Unit/Function</strong></span></span></p><br><p><span><span>MWSPC / Maintenance</span></span></p><br><p><span><span><strong>Department</strong></span></span></p><br><p><span><span>Maintenance Mechanical</span></span></p><br><br><p><span><span><strong>Direct Reports</strong></span></span></p><br><p><span><span><strong>Budget/Size</strong></span></span></p><br><br><p><span><span><strong>Grade</strong></span></span></p><br><p><span><span>M11</span></span></p><br><p><span><span><strong>Job Family</strong></span></span></p><br><br><p><span><span><strong>Position #</strong></span></span></p><br><p><span><span><strong>Sub Family</strong></span></span></p><br><br><p><span><span><strong>Position Type</strong></span></span></p><br><p><span><span>Regular</span></span></p><br><p><span><span><strong>Role Profile Number</strong></span></span></p><br><br><br><p><span><span><strong>Job Purpose</strong></span></span></p><br><br><br><p>The <strong>Superintendent, Mechanical</strong> leads the execution of preventive, corrective, predictive, and emergency mechanical maintenance activities to maintain safe, reliable, and efficient plant operations across MWSPC Maintenance.</p><br><p>The role sets maintenance priorities, supervises maintenance crews, and drives disciplined execution of mechanical maintenance work in line with operational needs, engineering standards, departmental procedures, and EHSS requirements.</p><br><p>The position strengthens plant reliability and equipment availability by coordinating resources, resolving mechanical issues, supporting reliability programs, documenting completed work, and developing maintenance capability through training, coaching, and team leadership.</p><br><p><span><span><strong>Key Accountabilities</strong></span></span></p><br><br><br><p><span><span><strong>1. Mechanical Maintenance Planning &amp; Execution</strong></span></span></p><br><ul><li><p><span>Lead preventive, corrective, predictive, and emergency mechanical maintenance activities to support safe and reliable plant operations.</span></p><br></li><li><p><span>Prioritize maintenance work assignments to optimize resource use and operational continuity.</span></p><br></li><li><p><span>Review schedules, timelines, inspections, testing activities, and machinery maintenance plans to drive effective execution.</span></p><br></li><li><p><span>Monitor maintenance crew activities and track progress against approved timelines until completion.</span></p><br></li><li><p><span>Coordinate with Maintenance and Production teams to align planned maintenance priorities with operational requirements.</span></p><br></li><li><p><span>Maintain readiness of resources, systems, procedures, equipment, and spare parts for emergencies and scheduled work.</span></p><br></li><li><p><span>Enforce adherence to relevant engineering standards, maintenance procedures, and work requirements.</span></p><br></li></ul><p><span><span><strong>2. Reliability, Problem Solving &amp; Continuous Improvement</strong></span></span></p><br><ul><li><p><span>Conduct routine plant and project site inspections to monitor progress and equipment condition.</span></p><br></li><li><p><span>Investigate identified and potential mechanical issues and implement approved cost-effective solutions.</span></p><br></li><li><p><span>Lead root cause analysis for repeated major failures to strengthen reliability and continuous improvement.</span></p><br></li><li><p><span>Drive chronic failure elimination studies and follow through on assigned corrective actions.</span></p><br></li><li><p><span>Troubleshoot mechanical problems and recommend practical solutions that reduce operational disruption.</span></p><br></li><li><p><span>Support the development and implementation of mechanical maintenance reliability programs and procedures.</span></p><br></li></ul><p><span><span><strong>3. Resource, Contractor &amp; Documentation Management</strong></span></span></p><br><ul><li><p><span>Plan and organize human and equipment resources required to deliver departmental objectives.</span></p><br></li><li><p><span>Contribute to the development of maintenance service agreements with customers and contractors.</span></p><br></li><li><p><span>Validate engineering and maintenance data, drawings, and documentation received from project contractors and vendors.</span></p><br></li><li><p><span>Develop, review, and approve technical proposals for outsourced routine, down day, and shutdown maintenance services.</span></p><br></li><li><p><span>Direct emergency repairs and critical inspections while ensuring completed work is properly documented.</span></p><br></li></ul><p><span><span><strong>4. Plant, Equipment &amp; Spare Parts Availability</strong></span></span></p><br><ul><li><p><span>Maintain company physical assets, including vehicles, machinery, and tools, in reliable operating condition.</span></p><br></li><li><p><span>Recommend new equipment, tools, and machinery that improve plant condition and production output.</span></p><br></li><li><p><span>Identify critical spare parts and specialized tools required under the reliability-centered maintenance program.</span></p><br></li><li><p><span>Support the development of spare parts specifications and supplier lists to strengthen maintenance readiness.</span></p><br></li></ul><p><span><span><strong>5. Performance, KPI &amp; Budget Contribution</strong></span></span></p><br><ul><li><p><span>Plan and prioritize maintenance activities to deliver cost-effective outcomes within budget.</span></p><br></li><li><p><span>Support the development of maintenance KPIs to monitor performance and execution effectiveness.</span></p><br></li><li><p><span>Deliver performance KPI targets, including safety KPI targets, through disciplined maintenance execution.</span></p><br></li><li><p><span>Provide input to annual maintenance and capital spares planning budgets.</span></p><br></li></ul><p><span><span><strong>6. Leadership, Training &amp; Capability Development</strong></span></span></p><br><ul><li><p><span>Lead maintenance teams by setting objectives, managing performance, and motivating employees to achieve group requirements.</span></p><br></li><li><p><span>Develop, guide, motivate, and cross-train multicultural maintenance teams to build versatile technical capability.</span></p><br></li><li><p><span>Identify training requirements for technicians and engineers and organize on-the-job training programs.</span></p><br></li><li><p><span>Mentor new and existing maintenance personnel on work controls, maintenance processes, and technical execution.</span></p><br></li><li><p><span>Build an engaged working environment that supports collaboration, ownership, and reliable maintenance delivery.</span></p><br></li><li><p><span>Develop future maintenance leaders to support plant and company capability.</span></p><br></li><li><p><span>Support recruitment of experienced and competent maintenance engineers and technicians.</span></p><br></li></ul><p><span><span><strong>7. Health, Safety &amp; Environment</strong></span></span></p><br><ul><li><p><span>Promote a Safety First culture across mechanical maintenance activities.</span></p><br></li><li><p><span>Implement operational EHSS Management System requirements across maintenance work.</span></p><br></li><li><p><span>Participate in emergency response and command activities when required.</span></p><br></li><li><p><span>Brief and train mechanical personnel and contractors on MWSPC EHSS regulations and compliance expectations.</span></p><br></li><li><p><span>Participate in accident and incident investigations and support implementation of safety actions.</span></p><br></li></ul><p><span><span><strong>Minimum Qualifications, Experience and Competencies</strong></span></span></p><br><br><br><p><span><strong>Minimum Qualifications:</strong></span></p><br><ul><li><p><span>Bachelor’s degree in Mechanical Engineering.</span></p><br></li></ul><p><span><strong>Minimum Experience:</strong></span></p><br><ul><li><p></p></li></ul> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> 2+ years </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph">In a world of possibilities, pursue one with endless opportunities. Imagine Next!<p> </p>At Parsons, you can imagine a career where you thrive, work with exceptional people, and be yourself. Guided by our leadership vision of valuing people, embracing agility, and fostering growth, we cultivate an innovative culture that empowers you to achieve your full potential. Unleash your talent and redefine what s possible.<p> </p> <p> </p> <p> <u> <b>Job Description:</b> </u> </p> <div> <p>Parsons is looking for an amazingly talented <b>Junior Civil Engineer (Saudi National)</b> to join our team!</p> <p> </p> <p> <b>What You ll Be Doing:</b> </p> <ul> <li> <p>Learns and performs a variety of civil engineering duties by applying basic engineering techniques and analyses within one discipline.</p> </li> <li> <p>At this level, the Engineer is in a developmental role, trained under close supervision in the use of engineering theories and practices, and gaining exposure to company procedures.</p> </li> <li> <p>Assignments may be part of a structured rotational program, including experience in Project Controls, Procurement, and Construction Management, as well as through several disciplines in Engineering. Some assignments involve computer-aided engineering (CAE) and computer-aided design (CAD) tools.</p> </li> </ul> <p> </p> <p> <b>What Required Skills You ll Bring:</b> </p> <ul> <li> <p>Bachelor s degree in Civil/Engineering (or related field)</p> </li> <li> <p> <b>3 to 7 years of related work experience</b>.</p> </li> <li> <p>Excellent communication skills in both Arabic and English.</p> </li> </ul> <p> </p> <p> <b>What Desired Skills You ll Bring:</b> </p> <ul> <li> <p>Requires basic engineering knowledge in electrical, mechanical, civil, or a related field.</p> </li> <li> <p>Familiarity with CAD and other engineering software packages is also required</p> </li> </ul> </div> <p> </p> <p> </p> <p> </p> <p> </p> <p> </p> <p> </p> <p> </p> <p> </p>Parsons equally employs representation at all job levels no matter the race, color, religion, sex (including pregnancy), national origin, age, disability or genetic information.<p> </p> <p> </p> <p>We truly invest and care about our employee s wellbeing and provide endless growth opportunities as the sky is the limit, so aim for the stars! Imagine next and join the Parsons quest APPLY TODAY!</p> <p> </p> <p> </p> <p>Parsons is aware of fraudulent recruitment practices. To learn more about recruitment fraud and how to report it, please refer to<span> </span> <span>https://www.parsons.com/fraudulent-recruitment/</span> .</p></div></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Wood is currently seeking a Mechanical Engineer to support our Projects business. The project site is located approximately 150 km from Riyadh, Saudi Arabia.<br> &nbsp;</p><br><p><strong>What we can offer</strong></p><br><ul> <li><strong>Medical Insurance&nbsp;</strong>-&nbsp;Ensures specialist care is available to you and eligible family members residing in country. Pre-existing medical conditions are covered. No limit on number of children covered under the policy however age and coverage limits apply in line with KSA CCHI rules. Option to select higher medical cover payable at employees own expense.</li> <li><strong>Employee Assistance Programme&nbsp;-&nbsp;</strong>Allows you to feel comfortable knowing that you or your immediate family members can confidentially discuss any work or personal issues that are an inevitable part of life. The program helps support your mental, physical, social &amp; financial well-being.</li> <li><strong>GOSI (Social Insurance)&nbsp;-&nbsp;</strong>Payable to KSA employees, social insurance contributions are paid by the company in line with Government legislation to cover occupational hazards.</li> <li><strong>End of Service Gratuity&nbsp;-&nbsp;</strong>In line with KSA Labour Law, all employees are eligible for an End of Service benefit.</li> <li><strong>Examination Leave&nbsp;-&nbsp;</strong>Upon company approval to enroll in an education institute or to continue within such institution, employees have the right to fully paid leave to sit for an examination of an unrepeated year. Leave duration is based on the days of actual examination and must be applied for no less than fifteen days prior exam</li> <li><strong>Professional Memberships -&nbsp;</strong>One professional membership, registration, subscription, certification and/or license cost per annum for all active Wood employees. The membership must be relevant to the role you are currently employed in or be part of a development plan. Reimbursement should be claimed via the expenses procedure system, with supporting evidence.</li> <li><strong>Inspire Awards -&nbsp;</strong>Our annual awards programme is all about recognising and celebrating our inspirational colleagues – those designing the future, upholding our values and playing a pivotal role in delivering our strategy. Employees can recognise those who inspire them and make their day by nominating them for their hard work, innovation and tenacity.</li> <li><strong>Long Service Award&nbsp;-&nbsp;</strong>Wood values the commitment and loyalty of our people. Celebrating Long Service provides an opportunity for the business to demonstrate their appreciation of the hard work, dedication and many years’ service of our employees at 5-year service milestones.</li> <li><strong>Career Development Champions&nbsp;-&nbsp;</strong>Prioritizes structured growth through goal setting and resource utilization. Employees use tools for planning and feedback, with managers actively coaching and mentoring to support advancement. Continuous learning and development are emphasized to help employees achieve their career goals effectively.</li></ul><br> Wood is a global leader in consulting, engineering and operations for the energy and materials sectors. With 33,000 people in around 50 countries, Wood supports clients across the full asset lifecycle, delivering safe, predictable outcomes while enabling resilient operations and a lower carbon future. Wood forms the Energy &amp; Materials pillar of Sidara - a global partnership uniting leading multidisciplinary engineering, design, and project management companies. www.woodgroup.com<br> <b>Diversity Statement&nbsp;</b><br> We are an equal opportunity employer that recognises the value of a diverse workforce. All suitably qualified applicants will receive consideration for employment on the basis of objective criteria and without regard to the following (which is a non-exhaustive list): race, colour, age, religion, gender, national origin, disability, sexual orientation, gender identity, protected veteran status, or other characteristics in accordance with the relevant governing laws.<br><br>Responsibilities:<br><p><span><strong>Responsibilities&nbsp;</strong></span></p><br><ul> <li>Originate new and revise existing engineering deliverables.</li> <li>Revise and check engineering deliverables against company procedures, standards, and checklists.</li> <li>Support in Planning and completion of work within allocated man-hours effectively and plan work to avoid slippage.</li> <li>support in Interfaces, coordinates and communicate effectively with the Project Manager and other team members.</li> <li>Coordinates with all disciplines (as necessary) in the preparation and development of the deliverables and ensure that other disciplines input are incorporated.</li> <li>Go for site visits and verify site conditions and markup drawings/perform as-built activities.</li> <li>Manage deliverables submission with required quality checks and proper management of record.</li> <li>Technical report writing and preparation of presentations.</li> <li>Full knowledge of Aramco, Sabic standards.&nbsp; &nbsp;</li> <li>Technical bid evaluation, Vendor document review and subcontract scope management.</li></ul><br>Qualifications:<br><p><strong>What makes you remarkable</strong></p><br><p>At Wood, we are committed to equal opportunities and welcome all talented individuals to consider joining our team. If you don’t meet every requirement listed, but believe you have relevant experience, knowledge, or transferable skills, we encourage you to apply.</p><br><p>Some roles may include mandatory qualifications or legislative requirements that cannot be adjusted. Where this applies, these criteria will be clearly highlighted. For all other aspects of the role, we are open to considering a wide range of backgrounds and experiences. It will take all of us working together to deliver solutions to the world’s most critical challenges.</p><br><p><strong>Qualifications&nbsp;</strong></p><br><ul> <li>Bachelor’s Degree in <strong>Mechanical Engineering</strong> or <strong>Chemical Engineering</strong>.</li> <li>Minimum 5 years of relevant experience.</li> <li>Experience in the oil &amp; gas, hydrocarbon, refinery, offshore, or infrastructure industries.</li> <li>Proven experience in mechanical inspection activities.</li> <li>Working knowledge of ASME (Sections I, V, VIII, IX), ANSI B31.3/4/8, NACE, API 620/650, and AWS D1.1 standards.</li> <li>Experience using inspection and testing equipment, including Positive Material Identification (PMI) equipment.</li> <li>Ability to inspect pipes, piping systems, fittings, valves, structural steel, fasteners, and other mechanical materials.</li> <li>Strong understanding of QA/QC requirements, inspection procedures, and industry best practices.</li></ul> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> No experience required </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span></span><p><strong>Requisition ID:<strong>28442</strong>&nbsp;&nbsp;</strong></p><br> <p><strong>Job Country:&nbsp; &nbsp;&nbsp;<strong>Saudi Arabia (SA)</strong>&nbsp;</strong></p><br> <p><strong>Job City:&nbsp; &nbsp; &nbsp; &nbsp; &nbsp;&nbsp;<strong>Riyadh</strong>&nbsp;&nbsp;</strong></p><br> <p><span><strong><span><span>&nbsp;Group Overview: </span></span></strong></span></p><br> <p><span><span><span><span>&nbsp; Headquartered in Riyadh, Saudi Arabia, we operate construction and manufacturing businesses, design &amp; development centers and a host of facilities in the Middle East and other countries. </span></span></span></span></p><br> <p><span><span><u><span>alfanar Building Systems</span></u></span></span></p><br> <p><span><span><span><span>&nbsp; &nbsp;alfanar Construction is classified as a Grade I contractor by the Contractors Classification Committee of the Government of Saudi Arabia.</span></span></span></span></p><br> <p><span><span><span><span>&nbsp; alfanar Building Systems manufactures and markets a variety of building construction products and systems. .</span></span></span></span></p><br> <p><span><span><strong><u><span><span>The core manufacturing activities of the industries operating under alfanar Building Systems are:</span></span></u></strong></span></span></p><br> <p><span><span><span><span>&nbsp; &nbsp;• Façade cladding, glazing systems and architectural aluminum products</span></span></span></span></p><br> <p><span><span><span><span>&nbsp; &nbsp;• Precast concrete products and architectural elements</span></span></span></span></p><br> <p><span><span><span><span>&nbsp; &nbsp;• Real estate development</span></span></span></span></p><br>Job Purpose <br><p>Creating detailed mechanical system designs and schematics for various projects. Analyzing project requirements, developing and testing mechanical systems, ensuring compliance with industry standards, and collaborating with other engineers and stakeholders to deliver efficient and reliable designs. Provide innovative solutions that meet technical specifications and project objectives while optimizing performance and cost.</p><br> <br><br>Key Accountability Areas <br><p>Design and Development:</p><br> <ul> <li>Create detailed mechanical system designs, schematics, and layouts for projects, ensuring they meet project specifications and industry standards. Conduct load calculations, system simulations, and performance analyses to ensure designs are efficient, reliable, and compliant with relevant codes and regulations.</li> </ul> <p>Documentation and Compliance:</p><br> <ul> <li>Prepare and maintain comprehensive documentation, including design drawings, specifications, and reports. Ensure all documentation is accurate and up-to-date. Ensure that all designs comply with national and local mechanical codes, safety standards, and quality assurance procedures.</li> </ul> <p>Collaboration and Communication:</p><br> <ul> <li>Work closely with other engineers, architects, and stakeholders to integrate mechanical systems with other building systems and project requirements. Communicate with clients to understand their needs, provide technical advice, and present design concepts and solutions.</li> </ul> <p>Project Management:</p><br> <ul> <li>Review and approve design modifications and changes, ensuring they align with project goals and specifications.</li> </ul> <p>Problem-Solving and Innovation:</p><br> <ul> <li>Identify and resolve design issues, perform system testing, and provide solutions to technical problems that occur during the implementation phase. Stay updated with industry trends, emerging technologies, and best practices to continuously improve design processes and solutions.</li> </ul> <br><br>Role Accountability <br><p>HR Proficiency:</p><br> <ul> <li>Ability to obtain updated soft and technical skills related to the job</li> <li>To have a vision and a plan for the career path and how to achieve it.</li> </ul> <p>Delivery:</p><br> <ul> <li>Perform the planned activities to meet the operational and development targets as per delivery schedules.</li> <li>Utilize resources effectively to achieve objectives within efficient cost and time.</li> <li>Provide a periodic report formatted by detailing the deviation and execution of planned tasks.</li> </ul> <p>Problem-Solving:</p><br> <ul> <li>Solve any related problems arise and escalate any complex operational issues.</li> </ul> <p>Quality:</p><br> <ul> <li>Ensure quality requirements to develop effective quality control and processes including specifications for products or processes or related activities.</li> </ul> <p>Business Process Improvements:</p><br> <ul> <li>Coordinate well-defined written systems, policies, procedures, and seek automations opportunities as much as possible.</li> </ul> <p>Compliance:</p><br> <ul> <li>Comply to related policy and procedures and work instructions.</li> </ul> <p>Health, Safety, and Environment:</p><br> <ul> <li>Ensure compliance of relevant safety, quality, and environmental management procedures and controls within defined area of work activity to guarantee safety, legislative compliance, and delivery of high-quality products/services.</li> </ul> <br><br>Academic Qualification <br>Bachelor Degree in Mechanical Engineering<br><br><br>Work Experience <br>Fresher - 0-2 years<br><br><br>Technical / Functional Competencies <br>Design Tools<br>Reporting<br>Troubleshooting<br>Compliance<br>Communication<br><br><br><br> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> No experience required </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> General information <br> Organisation About SPIE Global Services Energy <br> <br>As an international subsidiary of the SPIE Group present in around 30 countries in Europe, Africa, Asia Pacific, the Middle East and Americas, SPIE Global Services Energy operates across the entire energy production infrastructure value chain, from design to maintenance. SPIE Global Services Energy relies on an extensive local network to quickly deploy resources and meet its customers' needs in the safest possible conditions. <br> <br>Drawing on the expertise of its 5,000 employees, SPIE Global Services Energy helps players in the oil, gas and renewable energies industries improve the technical performance of their infrastructure, increase their energy efficiency and reduce their carbon footprint. <br> <br>With 55,000 employees and a strong local presence, SPIE group achieved in 2025 consolidated revenue of €10.4 billion and consolidated EBITA of €793 million.&nbsp;&nbsp; <br> Reference 2026-43975&nbsp;&nbsp; <br> <br> Area activity <p>Energy Transmission &amp; Distribution</p><br><br>Position description Job title <p>CSU Engineer ASU M/F</p><br><br> Contract type <p>Fixed-term-contract</p><br><br> Contractual hours <p>Full time</p><br><br> Contract duration <p>12 Months with possible extension</p><br><br> Job description <br><p>A CSU (Commissioning, Startup, and) Engineer for an Air Separation Unit (ASU) is a specialized process engineer. They are responsible for transitioning a newly constructed cryogenic plant from its mechanical completion into full, reliable, and safe commercial operations.</p><br><br><br><p>Key ResponsibilitiesPre-Commissioning &amp; Commissioning: Inspect and test plant equipment (compressors, expanders, cold boxes, molecular sieves, and distillation columns) to ensure they meet engineering designs and safety standards.</p><br><br><p>Plant Startup: Execute plant purges, pre-cooling, liquefaction, and cryogenic distillation to reach specified product purities (e.g., 99.5% oxygen, nitrogen, and argon).Performance Testing: Conduct operational and turndown tests to ensure the unit achieves designed output, efficiency, and energy consumption guarantees.</p><br><br><p>Troubleshooting: Resolve process bottlenecks, pressure drop issues, temperature anomalies, and equipment vibrations during early operations.Safety &amp; HAZOP Compliance: Enforce strict industrial safety protocols (especially critical for high-pressure pure oxygen systems) and participate in hazard and operability studies.</p><br><br><p>Documentation &amp; Handoff: Write detailed Standard Operating Procedures (SOPs), alarm response plans, and train the permanent operations team.Typical</p><br><br><br><br> <br> Profile <br><p>Requirements</p><br><br><p>Education: Degree in Chemical Engineering, Mechanical Engineering, or process-related discipline.</p><br><br><p>&nbsp;Experience: 15+ years of hands-on operator or engineering experience with industrial gas facilities, specifically focusing on cryogenic ASUs and molecular sieve technologies (TSA).</p><br><br><p>Core Competencies: Deep understanding of thermodynamics, gas compression, cryogenic distillation, and process control systems (DCS/SCADA).</p><br><br><p>Safety Certifications: Relevant local safety credentials (often including Confined Space Entry, Fall Protection, WHMIS/OSHA equivalents)</p><br><br> <br>Working at SPIE What can we offer you? <br><p>NA</p><br><br> <br>Position location Location <br> Duba,Neom <br>Candidate criteria Minimum level of experience required <p>10 years or more</p><br><br> Required authorisations <br><p>NA</p><br><br> <br> Languages <p>English (D-Full professional proficiency)</p><br><br>Our ambition Combining our differences <br><p>NA</p><br><br> <br> <br><br> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> No experience required </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Role &amp; responsibilities</p><p><br></p><p><br></p><p>Safety Engineer (HSE Engineer)</p><p><br></p><p><br></p><p>Shall be Diploma or Graduate engineer in Mechanical / Electrical.</p><p>3 to 4 Yrs experience in the construction field or Electromechanical projects.</p><p>Having NEBOSH certification.</p><p><br></p><p><br></p><p><br></p><p>Role: Occupational Health &amp; Safety - Other</p><p>Industry Type: Industrial Equipment / Machinery</p><p>Department: Environment Health &amp; Safety</p><p>Employment Type: Full Time, Permanent</p><p>Role Category: Occupational Health &amp; Safety</p><p>Education</p><p>UG: Diploma in Mechanical Engineering, Electrical, B.Tech / B.E. in Mechanical Engineering, Electrical</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Diploma or Graduate engineer in Mechanical / Electrical. 3 to 4 Yrs experience in the construction field or Electromechanical projects. Having NEBOSH certification.</p><p></p></section>

Electrical Engineer & Mechanical Engineer<br>Abniya Innovative Limited is looking for qualified professionals to join our team in Riyadh, Saudi Arabia.<br>Open Positions:<br>Electrical Engineer Mechanical Engineer<br>Requirements:<br>Bachelor's degree in the relevant engineering discipline. Experience in construction and MEP projects. Strong communication and teamwork skills. Immediate availability is preferred.<br>???? Location: Riyadh, Saudi Arabia<br> Qualified candidates are invited to send their updated CV to HR@abniyaksa.com.

Electrical Engineer & Mechanical Engineer<br>Abniya Innovative Limited is looking for qualified professionals to join our team in Riyadh, Saudi Arabia.<br>Open Positions:<br>Electrical Engineer Mechanical Engineer<br>Requirements:<br>Bachelor's degree in the relevant engineering discipline. Experience in construction and MEP projects. Strong communication and teamwork skills. Immediate availability is preferred.<br>???? Location: Riyadh, Saudi Arabia<br> Qualified candidates are invited to send their updated CV to HR@abniyaksa.com.

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <br><p>SYSTRA is one of the world's leading engineering and consultancy groups specialising in public transport and sustainable mobility. With over 10,300 employees, SYSTRA's mission is to design safe and sustainable transport solutions to bring people together, develop social inclusion and facilitate access to employment, education and leisure throughout the world.</p><br><br><p>For 65 years, the Group has been working alongside cities and regions to contribute to their development by creating, improving and modernising their infrastructure and transport systems, throughout the life cycle of their projects. SYSTRA is involved from the earliest stages of design through to the testing, deployment and maintenance phases. The company provides all its services in over 80 countries worldwide and generates 74% of its turnover internationally. With its new services, SYSTRA supports its clients and partners in their digital, ecological and energy transition, in order to invent the mobility of tomorrow.</p><br><br> Context <br><p><span><span>SYSTRA’s Mobility &amp; Railway Business Unit is anticipating future growth, with new metro projects. To support these potential opportunities, we are looking for an experienced <strong><span>Deputy Resident Engineer (Civil) </span></strong>to join our project teams and contribute to our mobility solutions.&nbsp;&nbsp;</span></span></p><br><br><p><span><span>The Mechanical Engineer will p</span></span>rovide engineering and technical support for all mechanical works performed on site therefore, SYSTRA is looking for <strong><span>Deputy Resident Engineer (Civil)</span></strong>&nbsp;to join our team to be based at Riyadh , Saudi Arabia.</p><br><br> Missions/Main Duties <br><ul><li>Lead a multidisciplinary team of engineers and inspectors across civil, mechanical, electrical, and architectural disciplines.</li><li>Monitor and coordinate contractor activities within the assigned rail project area to ensure safe and efficient project delivery.</li><li>Develop discipline-specific construction schedules and monitor progress against project milestones.</li><li>Provide schedule updates, progress assessments, and reporting to the Construction Manager.</li><li>Monitor material procurement, delivery, and availability to ensure construction activities remain on schedule.</li><li>Verify that delivered materials comply with project specifications, quality requirements, and industry standards.</li><li>Maintain first-level quality assurance oversight to ensure all installation works are executed in accordance with approved plans, specifications, and applicable standards.</li><li>Supervise construction engineering activities and provide technical expertise across one or more construction disciplines.</li><li>Ensure that inspections and testing activities are conducted, witnessed, documented, and completed in accordance with approved procedures.</li><li>Collaborate with construction management teams to identify and mitigate safety, environmental, and operational risks.</li><li>Promote safe work practices and ensure compliance with site-specific safety requirements and industry standards.</li><li>Coordinate with design engineering teams to support construction activities and resolve technical issues.</li><li>Review and interpret design drawings and specifications to ensure work is executed in accordance with the latest approved revisions.</li><li>Provide technical solutions to engineering and construction challenges and coordinate implementation with project stakeholders.</li><li>Maintain project records, progress reports, back-charge documentation, and other project controls documentation as required.</li><li>Coordinate and organize project documentation for final handover and project closeout activities.</li><li>Interface with clients, contractors, and senior management to support successful project execution.</li></ul> Profile/Skills <br><ul><li>Bachelor’s Degree in Engineering, Construction Management, or a related field.</li><li>Minimum 8 years of post-graduate experience on major civil or infrastructure projects.</li><li>Experience on rail, metro, transit, or related transportation projects.</li><li>Proven experience leading and managing multidisciplinary engineering and construction teams.</li><li>Strong problem-solving, coordination, and organizational skills.</li><li>Experience with construction materials testing and quality assurance, including soil, concrete, grout, dewatering, and load testing activities.</li><li>Strong understanding of construction planning, material delivery, staging, scheduling, and site coordination.</li><li>Knowledge of construction quality, safety, and compliance requirements.</li><li>Excellent communication and stakeholder management skills.</li></ul> <br><p>Systra is an equal opportunities company; this position is open to all applicants.</p><br><br> Workplace Type <p>..</p><br><br> <br> Why SYSTRA? Read more <span> sur Why SYSTRA?</span> <br> <br> <br> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> No experience required </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

‏⁦???? Job Opportunity | Mechanical Manufacturing Engineer<br>???? Nationality: Saudi ???? Experience: 0–3 Years???? Location: Jeddah, Saudi Arabia???? Degree: Mechanical Engineering<br>Join our team and take the next step in your engineering career! ⚙️Please mention Mechanical Manufacturing Engineer in the email subject.<br>???? Apply now: Send your CV toCv@alqimma.com

<p><strong>About the Role</strong></p><p>We are seeking a&nbsp;<strong>highly motivated and results-driven Sales Engineer</strong>&nbsp;with proven experience in the&nbsp;<strong>Saudi Arabian metal fabrication industry</strong>. This role is ideal for&nbsp;<strong>Gulf return candidates from India</strong>&nbsp;who possess strong technical knowledge, an established understanding of the KSA market, and a successful track record in industrial sales.</p><p>The successful candidate will be responsible for developing new business opportunities, managing key customer accounts, and achieving sales targets across industrial sectors.</p><p><strong>Key Responsibilities</strong></p><ul><li><p>Identify and develop new business opportunities across the Saudi market.</p></li><li><p>Promote and sell&nbsp;<strong>Metal Fabrication, FRP, and GRP</strong>&nbsp;products and solutions.</p></li><li><p>Manage the complete sales cycle from enquiry generation to order closure.</p></li><li><p>Conduct customer visits, technical discussions, and product presentations.</p></li><li><p>Prepare technical and commercial quotations in coordination with the estimation team.</p></li><li><p>Review drawings and specifications using&nbsp;<strong>AutoCAD</strong>.</p></li><li><p>Build strong relationships with contractors, consultants, EPC companies, and end users.</p></li><li><p>Maintain regular follow-ups and convert opportunities into orders.</p></li><li><p>Monitor market trends, competitor activities, and upcoming projects.</p></li><li><p>Achieve monthly sales targets and submit regular sales reports.</p></li></ul><p><strong>Mandatory Requirements</strong></p><ul><li><p><strong>Bachelor's Degree (B.Tech/B.E.)</strong>&nbsp;in Mechanical, Civil, Industrial, or a related Engineering discipline.</p></li><li><p><strong>3–5 years of proven sales experience</strong>&nbsp;in the&nbsp;<strong>Saudi Arabian Metal Fabrication, FRP, or GRP industry</strong>.</p></li><li><p><strong>Gulf Return candidate (India)</strong>&nbsp;with hands-on experience in the Saudi market.</p></li><li><p>Valid&nbsp;<strong>Saudi Driving License</strong>.</p></li><li><p>Good understanding of&nbsp;<strong>AutoCAD</strong>&nbsp;for reading and reviewing technical drawings.</p></li><li><p>Strong knowledge of industrial sales, project sales, and business development.</p></li><li><p>Excellent communication, negotiation, and customer relationship management skills.</p></li><li><p>Ability to work independently and deliver sales targets.</p></li></ul><p><strong>Preferred Experience</strong></p><p>Experience in one or more of the following products will be an added advantage:</p><ul><li><p>Steel Fabrication</p></li><li><p>FRP / GRP Products</p></li><li><p>Gratings</p></li><li><p>Handrails</p></li><li><p>Ladders</p></li><li><p>Structural Steel</p></li><li><p>Cable Trays</p></li><li><p>Access Platforms</p></li><li><p>Industrial Fabrication Solutions</p></li></ul><p><strong>What We Offer</strong></p><ul><li><p>Opportunity to work with a growing industrial solutions company in Saudi Arabia.</p></li><li><p>Performance-driven work environment.</p></li><li><p>Attractive salary package with performance incentives.</p></li><li><p>Career growth and long-term development opportunities.</p></li></ul><p><strong>Job Location:</strong>&nbsp;Jeddah, Saudi Arabia</p><p><strong>Notice Period:</strong>&nbsp;Immediate joiners or candidates with short notice periods will be preferred.</p><p><strong>Desired Candidate Profile</strong></p><p>Education:</p><br><ul><li><p>Bachelor's in Engineering (Preferred)</p></li></ul><br><p>Experience:</p><br><ul><li><p>Technical sales : 4 years (Preferred)</p></li></ul><br><p>Language:</p><br><ul><li><p>English (Preferred)</p></li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>We are looking for motivated, customer-focused people who want to join our team as a Reliability Maintenance Engineer. The focus of the Reliability Maintenance Engineering engineer role is to ensure safety regulations and policies are adhered to, to ensure preventative maintenance is conducted on time to a high standard and to provide high levels of equipment availability through continuous improvement.<br>Shift Pattern: This role includes working in non-traditional shift pattern, which may include nights and weekends <br>Key job responsibilities<br>Put health &amp; safety best practices first in all work carried out ensuring compliance with all health &amp; safety standards and regulations.<br>To develop Preventive and predictive maintenance of FC assets including material handling and automation systems<br>To be experienced in installing, maintaining, and troubleshooting any of the following: relay logic, ladder diagrams, controls components, sensors &amp; scanners, motor starters, relays, limit switches, electronic sensors, servo drives, frequency inverters, linear drives, sorters, mechanical components (rolls, bearing, belts)<br>To act as an ambassador for safety within the team and to promote safe working across the site<br>Manage day to day engineering and soft services including housekeeping and upkeep of premises<br>To Manage EHS and statuary compliance of FC including waste management and hazardous waste management as per bylaws, timely renewal of licenses<br>To develop and maintain a good working relationship across all levels in the organization<br>Ability to provide enriched feedback to enhance individual performance<br>Ability to prioritize and manage resources under high pressure<br>Oversees day-to-day facility operations, including conveyor system maintenance, supervises maintenance work and sub-contractors, Ensure implementation of facility systems checks through computerized maintenance management system. Provide technical guidance for MHE and BB maintenance.<br>To support technicians by motivating, providing knowledge and hands on experience<br>To develop and maintain a good working relationship across all levels in the organization<br>Ability to provide enriched feedback to enhance individual performance<br>Ability to prioritize and manage resources under high pressure<br>- Experience in Electrical/Mechanical/Electronics and Communication/Instrumentation and Controls<br>- Experience using CMMS (Computerized Maintenance Management Systems) to plan proactive maintenance and record reactive tasks<br>Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit https://amazon.jobs/content/en/how-we-hire/accommodations for more information. If the country/region you’re applying in isn’t listed, please contact your Recruiting Partner.</p><br> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> No experience required </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Perform mechanical inspections in accordance with approved Inspection Test Plans (ITPs) and project specifications Conduct inspections on pressure vessels, piping systems, storage tanks, and static equipment Verify compliance with applicable codes and standards such as ASME, API, and Aramco standards Witness and review activities including welding, fabrication, NDT, hydrotesting, and installation Review and validate WPS, PQR, and welder qualifications Monitor contractor performance and ensure adherence to quality and HSE requirements Identify non-conformities and support NCR issuance and close-out Prepare and maintain detailed inspection reports, logs, and documentation Coordinate with client representatives, contractors, and internal teams to ensure smooth execution of inspection activities Ensure compliance with project timelines, quality standards, and reporting requirements Strong knowledge of mechanical inspection practices in oil &amp; gas projects Experience with Saudi Aramco standards and approvals (preferred) Familiarity with EPC projects involving metallic and non-metallic systems Hands-on experience in NDT methods (VT, MT, PT, UT, RT)</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Bachelor s degree in mechanical engineering OR 2-year Industrial/Technical Diploma in Mechanical discipline Minimum 6 years of inspection experience (for Engineering Degree holders) Minimum 12 years of inspection experience (for Diploma holders) Mandatory Certifications: AWS Senior CWI or CSWIP 3.2 API 570 (Piping Inspector) API 510 (Pressure Vessel Inspector) API 653 (Storage Tank Inspector)</p><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <br><p>SYSTRA is one of the world's leading engineering and consultancy groups specialising in public transport and sustainable mobility. With over 10,300 employees, SYSTRA's mission is to design safe and sustainable transport solutions to bring people together, develop social inclusion and facilitate access to employment, education and leisure throughout the world.</p><br><br><p>For 65 years, the Group has been working alongside cities and regions to contribute to their development by creating, improving and modernising their infrastructure and transport systems, throughout the life cycle of their projects. SYSTRA is involved from the earliest stages of design through to the testing, deployment and maintenance phases. The company provides all its services in over 80 countries worldwide and generates 74% of its turnover internationally. With its new services, SYSTRA supports its clients and partners in their digital, ecological and energy transition, in order to invent the mobility of tomorrow.</p><br><br> Context <br><p><span><span>SYSTRA’s Mobility &amp; Railway Business Unit is anticipating future growth, with new metro projects. To support these potential opportunities, we are looking for an experienced <strong><span>Deputy Resident Engineer (Civil) </span></strong>to join our project teams and contribute to our mobility solutions.&nbsp;&nbsp;</span></span></p><br><br><p><span><span>The Mechanical Engineer will p</span></span>rovide engineering and technical support for all mechanical works performed on site therefore, SYSTRA is looking for <strong><span>Deputy Resident Engineer (Civil)</span></strong>&nbsp;to join our team to be based at Riyadh , Saudi Arabia.</p><br><br> Missions/Main Duties <br><ul><li>Lead a multidisciplinary team of engineers and inspectors across civil, mechanical, electrical, and architectural disciplines.</li><li>Monitor and coordinate contractor activities within the assigned rail project area to ensure safe and efficient project delivery.</li><li>Develop discipline-specific construction schedules and monitor progress against project milestones.</li><li>Provide schedule updates, progress assessments, and reporting to the Construction Manager.</li><li>Monitor material procurement, delivery, and availability to ensure construction activities remain on schedule.</li><li>Verify that delivered materials comply with project specifications, quality requirements, and industry standards.</li><li>Maintain first-level quality assurance oversight to ensure all installation works are executed in accordance with approved plans, specifications, and applicable standards.</li><li>Supervise construction engineering activities and provide technical expertise across one or more construction disciplines.</li><li>Ensure that inspections and testing activities are conducted, witnessed, documented, and completed in accordance with approved procedures.</li><li>Collaborate with construction management teams to identify and mitigate safety, environmental, and operational risks.</li><li>Promote safe work practices and ensure compliance with site-specific safety requirements and industry standards.</li><li>Coordinate with design engineering teams to support construction activities and resolve technical issues.</li><li>Review and interpret design drawings and specifications to ensure work is executed in accordance with the latest approved revisions.</li><li>Provide technical solutions to engineering and construction challenges and coordinate implementation with project stakeholders.</li><li>Maintain project records, progress reports, back-charge documentation, and other project controls documentation as required.</li><li>Coordinate and organize project documentation for final handover and project closeout activities.</li><li>Interface with clients, contractors, and senior management to support successful project execution.</li></ul> Profile/Skills <br><ul><li>Bachelor’s Degree in Engineering, Construction Management, or a related field.</li><li>Minimum 8 years of post-graduate experience on major civil or infrastructure projects.</li><li>Experience on rail, metro, transit, or related transportation projects.</li><li>Proven experience leading and managing multidisciplinary engineering and construction teams.</li><li>Strong problem-solving, coordination, and organizational skills.</li><li>Experience with construction materials testing and quality assurance, including soil, concrete, grout, dewatering, and load testing activities.</li><li>Strong understanding of construction planning, material delivery, staging, scheduling, and site coordination.</li><li>Knowledge of construction quality, safety, and compliance requirements.</li><li>Excellent communication and stakeholder management skills.</li></ul> <br><p>Systra is an equal opportunities company; this position is open to all applicants.</p><br><br> Workplace Type <p>..</p><br><br> <br> Why SYSTRA? Read more <span> sur Why SYSTRA?</span> <br> <br> <br> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> No experience required </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

Job Title: Mechanical Engineer Job Summary The Mechanical Engineer is responsible for supporting the reliability, integrity, and performance of mechanical equipment to ensure safe and efficient plant operations. The role involves troubleshooting equipment issues, improving asset reliability, conducting failure analysis, and supporting maintenance and continuous improvement initiatives. Key Responsibilities Provide engineering support for mechanical equipment and maintenance activities. Monitor equipment performance and recommend reliability improvements. Perform Root Cause Analysis (RCA) and support Failure Mode and Effects Analysis (FMEA). Support preventive, predictive, and reliability-centered maintenance programs. Troubleshoot issues related to rotating equipment, hydraulic systems, and material handling equipment. Ensure compliance with engineering standards, safety regulations, and industry best practices. Qualifications & Experience Bachelor's degree in mechanical engineering. Minimum 5 years of experience in heavy industrial environments such as smelting, mining, steel, or similar industries. Strong knowledge of mechanical integrity and asset reliability programs. Experience with rotating equipment, hydraulic systems, and material handling equipment. Professional Engineer (P. E.) certification is preferred. Technical Skills Knowledge of reliability methodologies (RCA, FMEA, PdM). Familiarity with engineering standards such as ASME, API, and ANSI. Strong analytical, troubleshooting, and problem-solving skills. Good communication and teamwork abilities.

Job Title: Junior Mechanical Engineer Job Location: Saudi Arabia<br>Role Purpose:The Junior Mechanical Engineer supports the delivery of mechanical works by assisting in the review, coordination, and implementation of design and construction activities on site. Working under the guidance of the Senior Mechanical Engineer and reporting to the Design Manager, the role contributes to shop drawing reviews, site inspections, technical documentation, and multidisciplinary coordination to ensure works are executed in accordance with approved drawings, specifications, and project requirements. The role is primarily site-focused, with responsibility for resolving day-to-day construction issues and supporting technical workflows. As part of this, the Mechanical Engineer is expected to actively contribute to drafting, detailing, and preparation of sketches, mark-ups, and redline drawings using CAD/BIM tools where required (e.g., routing adjustments, coordination fixes, temporary works), ensuring timely and practical solutions without over-reliance on dedicated drafting resources.<br>Key Accountabilities Key Activities Design, Site & Construction Support (Mechanical) Provide day-to-day mechanical engineering support on site, addressing construction queries, RFIs, and technical clarifications. Review mechanical works (HVAC, plumbing, fire protection, etc.) to verify compliance with approved drawings and specifications. Identify mechanical site issues, discrepancies, or non-conformances and report to the Senior Mechanical Engineer. Coordinate mechanical activities with structural, architectural, electrical, and fit-out works to avoid clashes and execution conflicts. Support inspections, testing, and commissioning activities for mechanical systems. Prepare and update sketches, mark-ups, and simple mechanical drawings/details using CAD tools to support site execution. Assist in producing redline drawings and as-built markups based on actual site conditions. Provide hands-on drafting support (Auto CAD/Revit/BIM tools) when required to resolve site issues efficiently. Ensure all issued sketches and drawings are clear, coordinated, and aligned with approved design intent. Shop Drawings, Submittals & As-Built Support Review mechanical shop drawings, material submittals, and method statements under supervision. Ensure compliance with design intent, specifications, and project standards. Assist in preparing technical comments and tracking submittal status. Verify that approved shop drawings and materials are properly implemented on site. Support preparation and validation of mechanical as-built drawings and documentation. Technical Queries, RFIs & NCR Management Assist in preparing responses to RFIs, Technical Queries (TQs), and site clarifications. Support investigation and close-out of NCRs, observations, and quality issues. Coordinate with the Senior Mechanical Engineer to resolve technical and coordination issues. Maintain records of technical correspondence and site decisions. Coordination & Communication Coordinate with site engineers, subcontractors, and suppliers on mechanical matters. Interface with other disciplines (Architectural, Structural, Electrical, etc.) for coordinated delivery. Attend coordination meetings and provide updates to senior team members. Ensure proper use of document control systems and project workflows. Continuous Improvement & Knowledge Sharing Develop knowledge of mechanical systems, installation practices, and coordination processes. Support lessons learned and continuous improvement initiatives. Seek guidance from senior engineers and contribute to team knowledge sharing. Promote best practices in mechanical construction quality and execution. JOB SPECIFICATIONSIndustry / Domain Design & Build engineering projects within the construction industry Multidisciplinary coordination across design and site delivery stages Mechanical systems implementation including HVAC, plumbing, and fire protection systems Necessary Knowledge and Experience Minimum 4–7 years of relevant experience in mechanical engineering within construction or design-build environments Experience in reviewing drawings, submittals, and supporting site execution Basic understanding of HVAC, plumbing, and fire protection systems Familiarity with multidisciplinary coordination and construction workflows Good command of English (written and spoken) Education and Certification Minimum Requirements Bachelor’s degree in Mechanical Engineering Professional certification is an advantage but not mandatory Job Specific and Technical Skills Working knowledge of Auto CAD, Revit, and BIM tools Ability to interpret and review mechanical drawings and specifications Basic understanding of installation, testing, and commissioning processes Ability to produce basic drawings, sketches, and redlines when required to support site delivery Good organizational and documentation skills Strong attention to detail and problem-solving ability

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>As a Service Engineer, you will provide cost effective maintenance and optimizing the technical performance of Hardware of products in the portfolio including maintenance and upgrading of Firmware (product system software) and product related applications via remote technical support using canon remote assistance tools.</p><p>To provide first line trouble shooting (root cause of problems) on the vast majority of standalone and connected Products.</p><p>To achieve a high first-time fix rate and minimum recalls with the most cost-effective use of labor time and parts.</p><p>Report about labor and parts investment, counter-reading by using CAESAR (Canon European Service Admin Coding) coding structure.</p><p>Optimize the stock inventory, rotation, and balance this against return to fit (RTF) visits.</p><p>Signal commercial opportunities to the sales and Marketing department by using OnSite-InSight .</p><p>Make contributions to the ongoing development of the team and overall service performance.</p><p>Fully understand the customer requirements to support the functional approach of the Solution Business Strategy.</p><p>Liaise and report back to relevant account manager on customer issues.</p><p>Identify super-users and provide appropriate training on Canon products installed and software as appropriate, including printer drivers and features.</p><p>Look for opportunities to develop other areas of the client s business and liaise with the account manager accordingly.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><h2>Engineering Degree or Diploma (electronics, mechanics, and software)</h2><h2>Relevant experience in the service industry</h2><h2>Experience in understanding and following health and safety guidelines</h2><h2>Demonstrates a high technical aptitude with excellent fault-finding skills</h2><h2>Good customer handling and communication skills.</h2><h2>Able to give customer instruction.</h2><h2>Team player that focuses on optimizing the team output</h2><h2>Good commercial insight and business acumen</h2><h2>Awareness to represent Canon as a company always (behavior, communication, and presentation / appearance)</h2><h2>Current GCC driving license</h2><h2>Competencies required:</h2><ul><li>Able to work on own initiative and in a team environment.</li><li>The ability to think outside the box for when solving problems</li><li>A high level of accuracy to provide relevant/timely information</li><li>The ability to get good results whilst working under pressure</li><li>Diplomacy and good communication skills</li></ul><h2>KPIs set but not limited to</h2><ul><li>First time fix (FTF)</li><li>Recall ratio (a call that is re-attended within 10 days of resolution)</li><li>Stock accuracy to be 100%</li><li>Resolution time (time between logging the call and closing/resolve the issue)</li><li>Number of satisfaction surveys received in a quarter (to be set by local service manager)</li><li>Customer satisfaction (scaled on all engineers not per individual)</li></ul><p>*the above the core KPIs and there maybe others based on business requirements</p><p>Canon Core Behaviors</p><ul><li>Drive for results</li><li>Customer Focus</li><li>Ownership and Accountability</li><li>Team Player</li><li>Courage and Conviction</li><li>People Orientated</li><li>Caring for self and others</li></ul><p></p></section>