Maintenance Technician Jobs in Saudi

<p>The Job Holder deputises for a senior company employee within the Typhoon Maintenance Organisation, responsible for the aspects of Personal Survival Pack Shop, compliance and continuous improvement while holding company line management responsibilities commensurate with the role, which includes; providing functional direction and guidance, exercising duty of care, welfare, health &amp; safety. To provide effective delivery of all activities as specified in the shop component repair plan. Support Salam Project success against the Maintenance Support Service contracted Operational Readiness (OR) and Key Performance Measurements (KPM)</p><p><strong>Outline Responsibility</strong></p><p><strong>Safety:</strong> Uphold a safety-first approach, implementing safety measures and guidelines to protect personnel, product and operations. Support and promote Safety, Health &amp; Environment (SHE) and Product Safety &amp; Environment (PS&amp;E).</p><p><strong>Compliance:</strong> Ensure adherence to BAE Systems Operational Framework, Life Cycle Management (LCM) practices, Maintenance &amp; Continuing Airworthiness (M&amp;CA) Mandates, Maintenance Organisation Exposition (MOE), and Royal Saudi Air Force (RSAF) Logistics Management Regulations (LMR) to meet the contractual obligations.</p><p><strong>Support:</strong> Enhancing customer satisfaction in supporting maintenance, airworthiness, safety and continual improvement. Developing new ways to improve the customer experience or otherwise growing the maintenance organization as a whole. This includes highlighting potential new processes and procedures.</p><p><strong>Continuous Improvements (CI):</strong> Strive for business excellence, by driving a culture of CI throughout the maintenance organization, encouraging innovative ideas and initiatives. Continuously seek opportunities to apply and adapt changes or improvements to best industry practices to enhance efficiency and effectiveness in the maintenance processes and create a sustainable future.</p><p><strong>Responsibilities:</strong></p><p>Accountable to their Primary Line Manager; however, they have direct access to Secondary Line Manager. This is to provide an independent route to address any issues within the Personal Survival Pack shop maintenance environment.</p><p>Undertake review of maintenance and challenge current practices and identify potential capacity for improvements within the organisation.</p><p>Recognising any malpractice that could affect the airworthiness or safety of the assigned components or personnel within their area of responsibility and raising the issue/concern to the Senior Maintenance Manager.</p><p>Ensuring that the necessary facilities resource are available, in accordance with company policies to enable their organisations to perform their duties and any contractual obligations.</p><p>Monitor standards of the personnel within their organisation in order to identify any negative trends, non-conformities or motivational deficiencies.</p><p>Accountable and responsible for all person s development reports within their direct and indirect line management, within their Area of Responsibility.</p><p>Providing a working environment to trust, where all employees of whom are professionals, each have a clear understanding of what standard of behaviour is considered acceptable or unacceptable, following the companies Code of Conduct .</p><p>Provide training, consolidation and counterpart development activities to the RSAF personnel and BAE Systems personnel.</p><p>Ensure all tasks are completed within designated timeframes to support Forward Maintenance and SMU activities.</p><p>Maintain operational readiness of shop equipment in line with the shop component repair plan and schedule necessary calibrations. Enhanced by ensuring the correct tooling, approved data is available.</p><p>Raise appropriate media for deficiencies in approved data (e.g. TPRFs, TQs, etc.). Any damage or deficiencies to equipment and infrastructure, are reported and monitored using the correct media (e.g. IDR, MDR, CAR, SORT, 1400-61, etc.).</p><p>Ensure that all personnel undertaking maintenance in their Area of Responsibility are authorised.</p><p>Maintain an anti-FOD surveillance and report potential hazards, which is further enhanced by the regular oversight checks of the shop and the components in the shop.</p><p>Ensure all maintenance tasks are carried out and meet the highest quality standards, including recording of maintenance carried out on the airworthiness tool (ESS) to accurately reflect the work carried out, test results indications/ values, consumables and POL.</p><p>Conduct oversight checks to ensure high standards of shop husbandry.</p><p>Ensure any forecasted planning, highlight any deficiencies or delivery/ FDD issues with consumables &amp; PPE are escalated to the primary line manager or secondary manager at the earliest opportunity.</p><p>Maintain competency currency for Martin Baker personal survival pack authorisations.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>A recognised qualification to NVQ3/ONC/OND/BTEC level in a relevant technical discipline, or a technical apprenticeship, or suitable equivalent technical qualification acceptable to M&amp;CA.</li><li>Have at least 7 years post qualification practical maintenance experience within operational flying aircraft environment supported by formal recorded workplace applied related training OR 3 years on same aircraft type.</li><li>Leadership skills and proven ability to supervise all levels of engineering personnel.</li><li>Hold 2nd signature.</li><li>The successful candidate, Saudi or Expatriate must obtain Saudi Council of Engineers (SCE) membership at the appropriate level, prior to starting the new role or commencing employment in KSA, SCE membership must be maintained throughout their employment in this role.</li><li>Thorough understanding of company processes and procedures</li><li>Broad aerospace and defence company / industry knowledge.</li><li>Proven supervisory experience within the area of definition.</li><li>An understanding of RAF and /or RSAF engineering operating procedures.</li><li>A track record of meeting strict deadlines without compromising standards and quality.</li><li>Previous experience of delivering work place training.</li><li>An understanding of ESS or similar electronic based reporting system.</li><li>Martin Baker Qualification.</li></ul>

Purpose of the Position To provide hands-on maintenance services for Quay Cranes (QC) and Yard Cranes (YC), while planning, supervising, and controlling the work of the assigned team. The role ensures operational and departmental priorities are achieved by maintaining the highest standards of safety, quality, productivity, and equipment reliability.<br>Key Competencies The Crane Electrical Engineer shall demonstrate competency in:Diagnosing, repairing, and servicing electrical and control systems. Identifying and classifying electrical and electronic components. Understanding the life cycles and failure modes of electrical and electronic components. Reading and interpreting electrical drawings, schematics, and technical manuals. Medium-voltage electrical installations and power distribution systems. Generator set operation, troubleshooting, and maintenance. Selecting and using electrical tools, testing instruments, and measuring devices. Using computer-based diagnostic software for troubleshooting. PLC programming and troubleshooting. Variable Frequency Drive (VFD) programming and commissioning. Planning and preparing materials, tools, and resources required for maintenance activities. Applying Health, Safety, and Environmental (HSE) rules and regulations. Managing time, manpower, and maintenance resources effectively. Using Microsoft Office applications (Excel, Word, and Outlook). Using Computerized Maintenance Management Systems (CMMS). <br>Qualifications Bachelor's Degree in Electrical Engineering. Fluent in English (reading, writing, and speaking). <br>Experience Minimum 5 years of experience in the marine port industry. Experience in the maintenance of container cranes (QC/STS, RTG, RMG, or YC) is preferred. Experience with PLCs, industrial drives, medium-voltage systems, and crane electrical systems is highly desirable. <br>Working Conditions The position is office-based with frequent visits to operational and maintenance areas. Working conditions include:Outdoor work in hot weather. Exposure to grease, oil, cleaning chemicals, and other industrial contaminants. Occasional exposure to high-noise environments. Work in areas with limited lighting. Mandatory use of Personal Protective Equipment (PPE) while performing field duties. <br>Skills and Attributes Strong attention to detail. Safety-oriented mindset. Leadership and supervisory skills. Excellent problem-solving and analytical abilities. Adaptability and flexibility. Effective time management. Strong work ethic. Team player with good interpersonal skills. Good communication skills.

Purpose of the Position To provide hands-on maintenance services for Quay Cranes (QC) and Yard Cranes (YC), while planning, supervising, and controlling the work of the assigned team. The role ensures operational and departmental priorities are achieved by maintaining the highest standards of safety, quality, productivity, and equipment reliability.<br><br>Key Competencies The Crane Electrical Engineer shall demonstrate competency in:Diagnosing, repairing, and servicing electrical and control systems. Identifying and classifying electrical and electronic components. Understanding the life cycles and failure modes of electrical and electronic components. Reading and interpreting electrical drawings, schematics, and technical manuals. Medium-voltage electrical installations and power distribution systems. Generator set operation, troubleshooting, and maintenance. Selecting and using electrical tools, testing instruments, and measuring devices. Using computer-based diagnostic software for troubleshooting. PLC programming and troubleshooting. Variable Frequency Drive (VFD) programming and commissioning. Planning and preparing materials, tools, and resources required for maintenance activities. Applying Health, Safety, and Environmental (HSE) rules and regulations. Managing time, manpower, and maintenance resources effectively. Using Microsoft Office applications (Excel, Word, and Outlook). Using Computerized Maintenance Management Systems (CMMS). <br><br>Qualifications Bachelor's Degree in Electrical Engineering. Fluent in English (reading, writing, and speaking). <br><br>Experience Minimum 5 years of experience in the marine port industry. Experience in the maintenance of container cranes (QC/STS, RTG, RMG, or YC) is preferred. Experience with PLCs, industrial drives, medium-voltage systems, and crane electrical systems is highly desirable. <br><br>Working Conditions The position is office-based with frequent visits to operational and maintenance areas. Working conditions include:Outdoor work in hot weather. Exposure to grease, oil, cleaning chemicals, and other industrial contaminants. Occasional exposure to high-noise environments. Work in areas with limited lighting. Mandatory use of Personal Protective Equipment (PPE) while performing field duties. <br><br>Skills and Attributes Strong attention to detail. Safety-oriented mindset. Leadership and supervisory skills. Excellent problem-solving and analytical abilities. Adaptability and flexibility. Effective time management. Strong work ethic. Team player with good interpersonal skills. Good communication skills.

Job Summary:Providing technical support and helping our customers by responding to their requests for service in a timely and efficient manner. Maintain professional reporting mechanism insuring medical equipment up time and customer satisfaction. Delivering high quality corrective maintenance, periodic preventative maintenance, and medical equipment installations.<br>Duties and Responsibilities Key Responsibilities:Installation: Expertly install and configure laboratory instruments, with a focus on CDG instruments, to meet the technical specifications and requirements of the laboratory. Maintenance: Perform routine maintenance tasks, including calibration and adjustments, to uphold the reliability and accuracy of laboratory instruments. Troubleshooting: Identify, diagnose, and resolve technical issues efficiently to minimize downtime and maintain uninterrupted functionality of CDG instruments. Preventive Maintenance: Implement proactive measures to prevent potential issues, contributing to the overall longevity and performance of laboratory equipment. Collaboration: Collaborate with laboratory staff to understand their needs, provide technical support, and offer training on proper instrument usage. Documentation: Maintain detailed records of installation procedures, maintenance activities, and troubleshooting processes for compliance and continuous improvement. Technology Integration: Stay abreast of the latest advancements in laboratory instrumentation, providing insights into potential upgrades or enhancements. Qualifications:Proven experience in the installation, maintenance, and troubleshooting of laboratory instruments, with a focus on CDG instruments. Strong analytical and problem-solving skills. Excellent communication and interpersonal skills for effective collaboration with laboratory personnel. Adaptability to evolving technologies and ability to thrive in a dynamic laboratory environment. Attributes:Detail-oriented with a commitment to maintaining instrument accuracy. Adaptable to changing priorities, able to work efficiently under pressure. Dedication to ensuring the reliability and functionality of laboratory instruments. Ability to work independently and adapt to different laboratory environments.<br>EXPERIENCE, Skills & Knowledge. Bachelor’s degree in biomedical engineering or any related field. Saudi Council of Engineers<br>Experience A minimum of 1 years' experience in related field Laboratory equipment experience is a plus and preferable. Basic network knowledge is a plus<br>Languages Proficiency in English<br>Competencies Coaching skills. Communication skills. Public relations. Team player. Data Reporting. Product knowledge. Computer skills. Quality of work. Customer service. Agility.

<p>Execution of assigned tasks and work orders related to all types of Electrical &amp; controls maintenance and any engineering related works in safe, good and cost-effective manner within the given time frames.</p> <p>Achieving the Line availability &amp; Equipment readiness.</p> <p>Follow &amp; review of PEMM (PepsiCo Maintenance Methodology) improvement plan throughout the year.</p> <p>The overall responsibility for performing assigned Work Orders as well as any other tasks by the supervisor.</p> <p>Solving technical problems and identifying the actions and parts requirement.</p> <p>Executing the maintenance schedules to maintain the plant equipment with-in given engineering standards.</p> <p>Maintain and implement AIB standards.</p> <p>SAP PM &amp; CM Work orders status updates.</p> <p>Identify the RCA of major and repeating problems.</p> <p>Ensure all requirements of the safety policies are adhering too.</p> <p>To implement, sustain and participate in the continual improvement of the EHS Management System (MS) at area of responsibility in accordance to the legislations, PepsiCo GEHSMS and relevant EHS &amp; Electrical standards, ensuring proper controls for all hazards and risks associated with all activities/areas are in place and EHS targets are achieved.</p> <p>Perform assigned Work Orders as well as any other tasks assigned by the supervisor.</p> <p>Respond to all technical problems within the assigned area and making sure proper actions are identified and taken.</p> <p>Knowledge of spare parts description, application and criticality.</p> <p>Adhere to EHS and QFS policies and standards.</p> <p>Ensure proper controls for all hazards and risks associated with all activities are in place and EHS targets are achieved.</p> <p>Operates all equipment related to Utilities sections.</p> <p>Maintain accurate SAP-PM records and updates for all assigned Work Orders.</p> <p>Performs required daily parameters reading and monitoring and as assigned by the supervisor.</p> <p>Daily reporting of all shift activities.</p> <p>Identify opportunities and support initiatives to improve production processes as assigned by Maintenance Supervisor in coordination with production personnel to improve quality, productivity, enhance safety or drive down costs.</p> <p>Support the execution of the site Maintenance and Reliability M&amp;R Strategy to achieve World Class maintenance status.</p> <p>Execute and follow the assigned actions related to PEMM (PepsiCo Maintenance Methodology) tool and MIAP (Maintenance Improvement Action Plan).</p> <p>Support the implementation of Reliability Engineering tools and techniques to achieve Maintenance and Reliability M&amp;R KPI's.</p> <p>Support executing Continuous Improvement CI initiatives and Failure Analysis techniques (e.g. Root Cause Analysis RCA).</p> <p>Attend the Maintenance forum meetings to share Maintenance Performance, Best Practices, Challenges and achievements</p><p><strong>Desired Candidate Profile</strong></p><p>Knowledge / Skill Diploma in Electrical &amp; Electronics / Instrumentation Engineering.</p> <p>Hands-on experience in electrical equipment troubleshooting, PLC, SCADA, Instrumentations and Controls.</p> <p>LT &amp; MCC, feeder panels &amp; control panels working background</p> <p>Electrical safety standards awareness</p> <p>Maintenance Planning &amp; execution system</p> <p>Awareness of Electrical safety standards as well as basic EHS systems.</p> <p>Have knowledge in operating and automation systems.</p> <p>Have Quality and Food Safety QFS systems and policies knowledge.</p> <p>Environment, Health and Safety EHS systems and policies knowledge.</p> <p>Can read and understand plans, diagrams, layouts and schematic drawings (in the field of qualification).</p> <p>Knowledge in any Maintenance Management software (CMMS) is a plus.</p> <p>Have a general knowledge and ability to use computers (MS office applications).</p> <p>Has good command of English language (Reading, Writing and Speaking).</p> <p>Basic computer skills of MS Office.</p> <p>Electrical safety standard s accomplishment.</p> <p>Experience Minimum 2 years industrial experience is preferred.</p> <p>Competencies Analytical thinker, can lead modifications and small projects</p> <p>Malfunctions and technical trouble shooting ability</p> <p>Able to do electrical &amp; controls works independently</p> <p>Able to do mechanical works independently &amp; support.</p> <p>A team player with good collaboration and communications skills.</p> <p>Flexible in tolerating to changes and accepting new ideas.</p> <p>Capable of executing planned activities.</p> <p>Able to do electrical &amp; controls works independently.</p> <p>Can support and motivate others.</p>

Job Title: Electrical Engineer Job Summary The Electrical Engineer is responsible for ensuring the reliability, integrity, and performance of the plant's electrical systems and equipment. The role provides technical support for maintenance, troubleshooting, reliability improvement, and continuous optimization of electrical assets to maximize equipment availability, operational efficiency, and safety. Key Responsibilities Provide engineering support for the maintenance, operation, and reliability of electrical systems and equipment. Monitor equipment performance and recommend improvements to enhance reliability and reduce downtime. Troubleshoot electrical failures and implement effective corrective and preventive solutions. Support preventive, predictive, and reliability-centered maintenance programs. Perform Root Cause Analysis (RCA) and participate in reliability improvement initiatives. Provide technical expertise for high and medium voltage power systems, protective relaying, motor controls, rectifier systems, transformers, Variable Frequency Drives (VFDs), Motor Control Centers (MCCs), and electric arc furnace systems. Ensure compliance with electrical engineering standards, safety regulations, and Arc Flash requirements. Collaborate with Operations, Maintenance, and Reliability teams to improve plant performance and asset reliability. Qualifications & Experience Bachelor's degree in Electrical Engineering. Minimum 5 years of experience in heavy industrial environments such as smelting, mining, steel, metals, or similar process industries. Hands-on experience with high and medium voltage power systems, protective relaying, motor controls, transformers, rectifier systems, VFDs, MCCs, and electric arc furnace systems. Good understanding of Arc Flash requirements and applicable standards, including NEC and NFPA 70. Technical Skills Strong knowledge of reliability methodologies, including Root Cause Analysis (RCA), Preventive Maintenance (PM), and Predictive Maintenance (PdM). Excellent analytical, troubleshooting, and problem-solving skills. Familiarity with electrical engineering standards and industry best practices. Proficiency in Microsoft Office and engineering documentation. Strong communication and teamwork skills.

<p>Works under the direction of Section Head Mechanical / Maintenance Manager to plan &amp; supervise all preventive and corrective maintenance, monthly / annual outage and overhauling work activities on plant mechanical equipments.</p><p>Assigns preventive and corrective maintenance jobs as per the direction of Maintenance Manager. Supervises and co-ordinates activities of maintenance staff. Maintains records, prepares reports and composes correspondence related to work.</p><p>Executes work order through CMMS (SAP) and co-ordinates with Planning Engineer for job completion and technical matters.</p><p>Maintain such communications and relations as are necessary to report on the status of matters requiring action and to ensure that corrective action is undertaken.</p><p>Helps Maintenance Manager in executing corrective and planned maintenance with due regard to annual scheduled maintenance plan.</p><p>To perform technical evaluation of quotations received from Purchase Department and recommend appropriate choice.</p><p>To prepare purchase requisitions for spare parts and consumables ensuring budgetary constraints and arrange strategic spares availability to cope up with the maintenance requirements.</p><p>Review and recommend new maintenance procedures and work instructions.</p><p>Supervise, direct and co-ordinate the activities of all personnel assigned to his area.</p><p>To carry out any other duty assigned to him by the management from time to time.</p><p>Ensure Environmental Aspect-Impact and Hazard Risk Assessment are carried out, controlled and updated.</p><p>Implement, monitor and report IMS objectives, Targets and programs.</p><p>Provide necessary resources for effective implementation and sustenance of IMS.</p><p>Report IMS performance to the management periodically.</p><p>Ensure Legal compliance with respect to their scope of activities.</p><p>Ensure identification of root cause for the identified non conformances/deviations and implement corrective actions/preventive actions.</p><p>Identify the competency gap for their subordinate personnel and implement necessary actions.</p><p>Carry out annual performance evaluation of reporting employees.</p><p>Responsible to ensure the compliance to legal requirements, contractual and organizational requirements.</p><p>Provide on-the-job training to new employees and evaluate their OJT Performance.</p><p>Identification, documentation and control of hazards in assigned work area.</p><p>Ensure aspects identified are monitored and operational controls are followed.</p><p>Report deviations in Integrated Management System and identify root cause and implement corrective and preventive actions.</p><p>Reporting of emergencies and incidents and near misses.</p><p>Effective resource utilization.</p><p>Perform other duties as assigned.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor's Engineering Degree (B.E.) in Mechanical from a four-year College or University.</li><li>Minimum: 4 8 years related experience and training or equivalent combination of education and experience.</li><li>Preferable: More than 8 years of related experience and training or equivalent combination of education and experience.</li><li>Awareness of Quality, Occupational Health &amp; Safety and Environment Management System principles.</li><li>Knowledge of applicable legal requirements.</li><li>Hazard Risk Assessment.</li><li>Aspect Impact Assessment.</li><li>Investigating skills.</li><li>Knowledge of spillage containment.</li><li>Knowledge of managing HSE emergencies.</li><li>Knowledge of identification, classification and disposal of waste.</li><li>Knowledge of Emission Monitoring.</li><li>Be able to lead the maintenance group.</li><li>Excellent communication skills in English language.</li><li>Computer literate. Able to use MS Outlook for correspondence.</li><li>Be able to use SAP as end user.</li></ul>

<ul><li>Perform routine inspections and maintenance on building systems including HVAC, plumbing, and electrical to ensure optimal functionality.</li><li>Respond promptly to maintenance requests and troubleshoot issues efficiently to minimize downtime and maintain safety standards.</li><li>Conduct preventative maintenance tasks such as changing filters, lubricating equipment, and checking for wear and tear on systems.</li><li>Assist in the repair of building infrastructure, including drywall, flooring, and roofing, to maintain a safe and appealing environment.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>High school diploma or equivalent; vocational training in maintenance or a related field is preferred.</li><li>At least 3 years of hands-on experience in facility maintenance or a similar role within a commercial or industrial setting.</li><li>Certifications such as HVAC, plumbing, or electrical are highly valued, showcasing a commitment to professional development.</li><li>Proficiency in using maintenance software and tools, demonstrating technical acumen and problem-solving abilities.</li></ul>

<p> </p> <p>Location: Bisha PV</p> <p> <strong> <span>Job Purpose</span></strong> <br> <br>To ensure the reliable, safe, and efficient operation of robotic systems used within the solar PV plant, particularly robotic panel-cleaning systems. The role is responsible for electrical maintenance, troubleshooting, performance monitoring, and continuous improvement of robotic equipment and its associated electrical and control systems.<br> <br> <strong>Key Responsibilities</strong> <br> <br>- Operate, monitor, inspect, and maintain robotic systems across the solar PV plant.<br>- Perform preventive, predictive, and corrective maintenance activities in accordance with approved maintenance plans.<br> - Diagnose and rectify electrical and control-related faults involving motors, drives, sensors, batteries, charging systems, communication networks, PLCs, and control panels.<br>Monitor robotic system performance, availability, alarms, and operational data to identify recurring issues and improvement opportunities.<br>- Troubleshoot communication failures between robots, control stations, SCADA systems, and other monitoring platforms.<br>- Conduct root cause analysis for equipment failures and implement corrective and preventive actions.<br>- Coordinate with robotics vendors, OEMs, contractors, and internal O&amp;M teams for technical support, repairs, upgrades, and warranty claims.<br>- Review electrical drawings, wiring diagrams, technical manuals, method statements, and maintenance procedures.<br>- Maintain accurate records of inspections, breakdowns, maintenance activities, spare parts usage, and system performance.<br>- Ensure the availability of critical spare parts and support inventory planning for robotic equipment.<br>- Participate in testing, commissioning, software or firmware upgrades, and modification of robotic systems.<br>- Identify opportunities to improve equipment reliability, cleaning efficiency, energy consumption, and maintenance cost.<br>- Ensure all activities comply with company HSE requirements, electrical safety procedures, permit-to-work systems, and LOTO requirements.<br>- Provide technical guidance and training to technicians and other relevant team members.<br>- Support emergency maintenance and troubleshooting activities when required.<br> <br> <strong>Qualifications</strong> <br> <br>- Bachelor s degree in Electrical Engineering, Mechatronics Engineering, Robotics Engineering, Automation Engineering, or a related discipline.<br>- Relevant professional certification or Saudi Council of Engineers registration is preferred.<br> <br> <strong>Experience</strong> <br> <br>- Minimum 5 years of relevant experience in electrical maintenance, industrial automation, robotics, or control systems.<br>- Experience in solar PV plants or robotic panel-cleaning systems is highly preferred.<br>- Practical experience with PLCs, VFDs, sensors, motors, batteries, charging systems, SCADA, and industrial communication networks.<br>- Experience in troubleshooting automated or remotely controlled equipment.<br>- Previous experience coordinating with OEMs and technical service providers is preferred.<br> <br> <strong>Technical Skills</strong> <br> <br>- Electrical fault diagnosis and troubleshooting.<br>- Robotics and industrial automation systems.<br>- PLC and control-system fundamentals.<br>- Interpretation of electrical drawings and wiring diagrams.<br>- SCADA and equipment-monitoring systems.<br>- Motors, drives, sensors, batteries, and charging systems.<br>- Root cause analysis and reliability improvement.<br>- Preventive and predictive maintenance.<br>- CMMS and maintenance reporting tools.<br>- Knowledge of electrical safety standards and LOTO procedures. </p> <p> </p>

<p>Key Responsibilities</p><p>Property Operations</p><p>* Manage daily operations of assigned properties.</p><p>* Conduct regular property inspections and ensure high presentation standards.</p><p>* Coordinate preventive and corrective maintenance.</p><p>* Supervise maintenance contractors and service providers.</p><p>* Ensure all properties comply with safety and Civil Defense requirements.</p><p>Tenant Management</p><p>* Serve as the primary point of contact for tenants.</p><p>* Handle tenant inquiries, complaints, and service requests.</p><p>* Coordinate move-in and move-out inspections.</p><p>* Maintain strong relationships with tenants and property owners.</p><p>* Improve tenant retention and satisfaction.</p><p>Lease Administration</p><p>* Prepare tenancy agreements and renewals.</p><p>* Manage lease expirations and renewals.</p><p>* Register and manage contracts through the Ejar platform.</p><p>* Maintain accurate lease documentation.</p><p>Rent Collection</p><p>* Monitor rental payments.</p><p>* Follow up on overdue payments.</p><p>* Coordinate with Finance regarding invoices and receipts.</p><p>* Prepare collection reports and aging reports.</p><p>Property Maintenance</p><p>* Receive maintenance requests.</p><p>* Assign work orders.</p><p>* Follow up until completion.</p><p>* Ensure contractor performance meets agreed SLAs.</p><p>Owner Relations</p><p>* Prepare monthly reports for property owners.</p><p>* Provide occupancy reports.</p><p>* Present maintenance summaries.</p><p>* Recommend operational improvements.</p><p>Documentation &amp; CRM</p><p>* Maintain complete property records.</p><p>* Update CRM with tenant information.</p><p>* Maintain digital documentation.</p><p>* Track renewals, maintenance history, and occupancy.</p><p>Reporting</p><p>Prepare periodic reports including:</p><p>* Occupancy Rate</p><p>* Collection Report</p><p>* Vacancy Report</p><p>* Maintenance Report</p><p>* Lease Expiration Report</p><p>* Property Performance Report</p><p>Compliance</p><p>* Ensure compliance with Saudi real estate regulations.</p><p>* Coordinate with REGA requirements.</p><p>* Maintain Ejar compliance.</p><p>* Ensure documentation is complete and updated.</p><p><strong>Requirements</strong></p><p></p><p>Job Requirements</p><p>Education</p><p>* Bachelor’s Degree in:</p><p> * Business Administration</p><p> * Real Estate</p><p> * Property Management</p><p> * Facilities Management</p><p> * Or related field</p><p>Experience</p><p>* 2–5 years of experience in:</p><p> * Property Management</p><p> * Real Estate Operations</p><p> * Leasing Administration</p><p> * Facilities Management</p><p>Technical Skills</p><p>* Experience using the Ejar platform.</p><p>* CRM experience (Zoho CRM preferred).</p><p>* Strong Microsoft Office skills (Excel, Word, Outlook).</p><p>* Knowledge of property management software (Yardi, SAP RE, Oracle, etc.) is an advantage.</p><p>* Ability to prepare reports and analyze operational data.</p><p>Knowledge</p><p>* Saudi tenancy regulations.</p><p>* REGA regulations.</p><p>* Lease administration.</p><p>* Rent collection procedures.</p><p>* Property maintenance coordination.</p><p>* Vendor management.</p><p>* Budget and expense tracking.</p><p>Soft Skills</p><p>* Excellent communication skills.</p><p>* Strong negotiation skills.</p><p>* Customer service mindset.</p><p>* Time management.</p><p>* Attention to detail.</p><p>* Problem-solving abilities.</p><p>* Ability to manage multiple properties simultaneously.</p><p>* Teamwork and collaboration.</p><p>Language</p><p>* Arabic: Native.</p><p>* English: Professional working proficiency.</p><p>⸻</p><p>Preferred Qualifications</p><p>* REGA-related certification.</p><p>* Experience with commercial properties.</p><p>* Experience managing mixed-use developments.</p><p>* Valid Saudi driving license.</p><p>* Knowledge of budgeting and financial reporting.</p><p>⸻</p><p>KPIs</p><p>* Occupancy Rate</p><p>* Lease Renewal Rate</p><p>* Rent Collection Rate</p><p>* Tenant Satisfaction Score</p><p>* Average Maintenance Response Time</p><p>* Maintenance Completion Time</p><p>* Number of Overdue Payments</p><p>* Property Inspection Completion Rate</p><p>* Owner Satisfaction</p><p>* CRM Data Accuracy</p><p>* Vacancy Turnaround Time</p><p>* Compliance with Ejar and REGA requirements</p>

Mane Contract Services is currently recruiting for experienced B1 Licensed Aircraft Engineers with a valid EASA Part-66 Licence and Airbus A330 (CF6) type rating for an ongoing contract based in Jeddah, Saudi Arabia. This is an excellent opportunity to join a well-established maintenance operation on a long-term contract with a competitive package and full logistical support. Contract Details:Start: ASAPOngoing contract€480 per day Rotation: 30 Days On / 15 Days Off8–12 hours per day Apartment provided All flights provided Local transport provided Visa organised by the end client Role Responsibilities:Perform scheduled and unscheduled maintenance on Airbus A330 (CF6) aircraft. Certify maintenance activities in accordance with EASA Part-145 requirements. Diagnose and rectify aircraft defects while maintaining the highest safety standards. Complete all maintenance documentation accurately and in a timely manner. Ensure compliance with company procedures and aviation regulations. Work effectively as part of a professional maintenance team. Requirements:Valid EASA Part-66 B1 Licence. Airbus A330 (CF6) type rating. Recent certifying experience on the A330 (CF6). Strong troubleshooting and defect rectification experience. Good command of the English language. Eligible to obtain the required work visa for Saudi Arabia.

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Title:</b></p><br><br>Mechanical Engineer(Static)<br><br><p><b>Mechanical Engineer- static</b></p><br><br><p><b>EMEC20 - Technical Professional - Mechanical</b></p><br><br><br><p>KBR Sustainable Technology Solutions (STS) provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design capabilities, and smart solutions to optimize planned and operating assets.</p><br><br><br><p>KBR is looking for a <b>Mechanical Engineer- static</b>t<span>o guaranty that daily maintenance activities (corrective, preventive and predictive for mechanical, I/E and rotating equipment) of Petrochemical plant are carried out by Contractor, in compliance with safety, environment and quality rules to assure sector availability, reliability and operation continuity</span></p><br><br><p><br><b>Responsibilities:</b></p><br><br><ul><li>Execution of all maintenance jobs assign to contractor related to mechanical, electrical and instrumentation of Petrochemical plant in accordance with Company standard.</li><li>Regular reporting in CMMS system regarding maintenance execution.</li><li>Provide required supports to planning and scheduling supervisor.</li><li>Support to company reliability department for bad actor analysis.</li><li>Prepare weekly report and discuss in Maintenance meeting.</li><li><span>Review and enhance knowledge of personnel by job specific Training by coordinating with Head of HR.</span></li><li><span>Stick and conform for follow up of all safety requirements at job execution phase.</span></li></ul><p><br><b>Qualifications:</b></p><br><br><ul><li>Minimum 15 years’ experience in Oil &amp; Gas maintenance – High School.</li><li>Minimum 10 years’ experience in Oil &amp; Gas maintenance – Diploma.</li><li>Minimum 7 years’ experience in Oil &amp; Gas maintenance – Bachelor Degree</li><li><span>Good knowledge of the equipment’s of the refining, team, Piloting of maintenance contracts, good knowledge of the safety rules</span></li><li>Well organized and proactive with excellent communication skills</li><li>Proven leadership skills with large organizations</li><li>Maturity of judgment under pressure and ability to resolve problems</li><li>Strategic thinking, open to new ideas</li><li>An ability to achieve business results working in a multi-cultural environment</li></ul><br><p><b>Belong. Connect. Grow. with KBR!</b></p><br><br><br><br><br> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> No experience required </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

<h3 >About the Refrigeration Engineer Role</h3> <p >Al Toga is seeking a dedicated <strong >Refrigeration Engineer</strong> to join our team in Dammam, Eastern Region. This full-time position involves the comprehensive management and maintenance of our critical refrigeration infrastructure, ensuring optimal performance and reliability across our facilities.</p> <h3 >Role Purpose</h3> <p >The Refrigeration Engineer plays a vital role in maintaining product quality, upholding food safety standards, and ensuring uninterrupted cold chain operations. This includes overseeing industrial chillers, cold store rooms, refrigerators, and blast freezers within our production and storage environments.</p> <h3 >Key Responsibilities</h3> <ul > <li >Operate, maintain, and troubleshoot industrial chillers, freezer rooms, and blast freezer systems.</li> <li >Perform preventive and corrective maintenance on refrigeration units, compressors, condensers, evaporators, and control systems.</li> <li >Monitor and maintain optimal temperature and humidity levels across all cold storage areas to preserve product quality.</li> <li >Diagnose and repair mechanical, electrical, and refrigerant-related faults efficiently.</li> <li >Manage refrigerant handling, recovery, and recharging in strict accordance with safety and environmental regulations.</li> <li >Conduct routine inspections and maintain accurate maintenance logs and reports for all refrigeration equipment.</li> <li >Coordinate effectively with production and warehouse teams to schedule maintenance activities with minimal operational disruption.</li> <li >Manage relationships with external service providers and spare parts suppliers to ensure timely support.</li> <li >Respond promptly to emergency breakdowns and implement solutions to minimize downtime.</li> </ul> <h3 >Required Experience</h3> <p >Candidates for this position should possess <strong >2 to 5 years</strong> of professional experience as a Refrigeration Engineer or in a similar capacity involving the maintenance and management of industrial refrigeration systems.</p> <h3 >Work Environment and Location</h3> <p >This is a full-time position based in <strong >Dammam, Eastern Region</strong>, Saudi Arabia. The role requires on-site presence to manage and maintain refrigeration infrastructure across our production and storage facilities.</p> <h3 >Application Process</h3> <p >Interested candidates are invited to apply. Salary details will be discussed during the interview process.</p>

<p>We are seeking a dedicated Operation and Maintenance Engineer to ensure the efficient operation and upkeep of our water facilities in Saudi Arabia. The successful candidate will play a pivotal role in maintaining system reliability, optimizing performance, and implementing preventive maintenance strategies to support our mission of delivering clean and safe water. Responsibilities: - Oversee the daily operation and maintenance of water treatment and distribution systems. - Conduct regular inspections, troubleshoot equipment issues, and implement corrective actions promptly. - Develop and execute preventive maintenance schedules to minimize downtime and extend equipment lifespan. - Coordinate with vendors and contractors for repairs, upgrades, and installation of new equipment. - Ensure compliance with local regulations, safety standards, and environmental guidelines. - Maintain detailed records of maintenance activities, operational data, and reports for management review. - Collaborate with cross-functional teams to improve operational efficiency and implement innovative solutions.</p><p>- Bachelor’s degree in Mechanical, Electrical, Civil Engineering, or a related field. - Proven experience in operation and maintenance within the water industry or similar sectors. - Strong knowledge of water treatment processes, mechanical and electrical systems, and maintenance practices. - Ability to troubleshoot complex technical problems and provide effective solutions. - Familiarity with relevant local regulations and safety standards in Saudi Arabia. - Excellent communication and teamwork skills, with a proactive and detail-oriented approach. - Willingness to work in shifts and respond to emergency call-outs as needed.</p>

<p><br></p><p><b>Role Objective</b></p><p>The Job Holder deputises for a senior company employee within the Typhoon Maintenance Organisation, responsible for the aspects of Egress Shop, compliance and continuous improvement while holding company line management responsibilities commensurate with the role, which includes providing functional direction and guidance, exercising duty of care, welfare, health &amp; safety and discipline of all employees under their control.</p><p>To provide effective delivery of all activities as specified in the shop component repair plan. Support Salam Project success against the Maintenance Support Service contracted Operational Readiness (OR) and Key Performance Measurements (KPM)</p><p>Outline Responsibility</p><p>Safety: Uphold a safety-first approach, implementing safety measures and guidelines to protect personnel, product, and operations. Support and promote Safety, Health &amp; Environment (SHE) and Product Safety &amp; Environment (PS&amp;E).</p><p>Compliance: Ensure adherence to BAE Systems Operational Framework, Life Cycle Management (LCM) practices, Maintenance &amp; Continuing Airworthiness (M&amp;CA) Mandates, Maintenance Organisation Exposition (MOE), and Royal Saudi Air Force (RSAF) Logistics Management Regulations (LMR) to meet the contractual obligations. Support: Enhancing customer satisfaction in supporting maintenance, airworthiness, safety, and continual improvement. Developing new ways to improve the customer experience or otherwise growing the maintenance organization. This includes highlighting potential new processes and procedures.</p><p>Continuous Improvements (CI): Strive for business excellence, by driving a culture of CI throughout the maintenance organization, encouraging innovative ideas and initiatives. Continuously seek opportunities to apply and adapt changes or improvements to best industry practices to enhance efficiency and effectiveness in the maintenance processes and create a sustainable future.</p><p>MAIN RESPONSIBILITIES:</p><p>Accountable to their Primary Line Manager; however, they have direct access to Secondary Line Manager. This is to provide an independent route to address any issues within the Egress maintenance environment.</p><p>Undertake reviews of maintenance and challenge current practices and identify potential capacity for improvements within the organisation.</p><p>Recognising any malpractice that could affect the airworthiness or safety of the assigned components or personnel within their area of responsibility and raising the issue/concern to the Senior Maintenance Manager.</p><p>Ensuring that the necessary manpower and facilities resource are available, in accordance with company policies to enable their organisations to perform their duties and any contractual obligations.</p><p>Monitor standards of the personnel within the organisation to identify any negative trends, non-conformities or motivational deficiencies.</p><p>Accountable and responsible for all person s development reports within their direct and indirect line management, within their Area of Responsibility.</p><p>Providing a working environment of trust, where all employees of whom are professionals, each have a clear understanding of what standard of behaviour is considered acceptable or unacceptable, following the companies Code of Conduct.</p><p>Provide consolidation and counterpart development activities to the RSAF personnel and BAE Systems personnel.</p><p>Ensure all tasks are completed within designated timeframes to support Forward Maintenance and SMU activities.</p><p>Maintain operational readiness of shop equipment in line with shop component repair plan and highlight necessary calibrations.</p><p>Enhanced by ensuring the correct tooling, approved data is available. Raise appropriate media for deficiencies in approved data (e.g. TPRFs, TQs, etc.).</p><p>Ensure that all personnel undertaking maintenance in their area of responsibility are authorised.</p><p>Any damage or deficiencies to equipment and infrastructure, are reported and monitored using the correct media (e.g., IDR, MDR, CAR, SORT, 1400-61, etc.).</p><p>Maintain an anti-FOD surveillance and report potential Hazards, which is further enhanced by the regular oversight checks of the shop and the components in the shop.</p><p>Ensure all maintenance tasks are conducted and meet the highest quality standards, including recording of maintenance carried out on the airworthiness tool (ESS) to accurately reflect the work carried out, test results indications/ values, consumables and POL.</p><p>Conduct oversight checks to ensure high standards of shop husbandry.</p><p>Assist in updating the TTP131 spreadsheet to reflect any forecasted planning, highlight any deficiencies or delivery/ FDD issues with consumables &amp; PPE at the earliest opportunity.</p><p>Ensure daily shop status is updated in a timely fashion to support the reporting to customer and company.</p><p>Maintain competency currency for Martin Baker seat and canopy component authorisations. Hold 2nd Signature and able to undertake the required responsibilities.</p><p>Job Requirements:</p><p>Essential</p><p>A recognised qualification to NVQ3/ONC/OND/BTEC level in a relevant technical discipline, or a technical apprenticeship, or suitable equivalent technical qualification acceptable to M&amp;CA.</p><p>Have at least 7 years post qualification practical maintenance experience within operational flying aircraft environment supported by formal recorded workplace applied related training OR 3 years on same aircraft type. Relevant type training ( Q Course) and equipment specific training if required.</p><p>Leadership skills and proven ability to supervise all levels of engineering personnel.</p><p>The successful candidate, Saudi or Expatriate must obtain Saudi Council of Engineers (SCE) membership at the appropriate level, prior to starting the new role or commencing employment in KSA, SCE membership must be maintained throughout their employment in this role.</p><p>Experience working with ESS.</p><p>Desirable</p><p>Broad Aerospace and defence company / industry knowledge.</p><p>An understanding of BAESSA engineering operating procedures.</p><p>Proven supervisory experience within the area of definition.</p><p><br></p><p><strong>Desired Candidate Profile</strong></p><ul><li>A recognised qualification to NVQ3/ONC/OND/BTEC level in a relevant technical discipline, or a technical apprenticeship, or suitable equivalent technical qualification acceptable to M&amp;CA.</li><li>Have at least 7 years post qualification practical maintenance experience within operational flying aircraft environment supported by formal recorded workplace applied related training OR 3 years on same aircraft type.</li><li>Relevant type training ( Q Course) and equipment specific training if required.</li><li>Leadership skills and proven ability to supervise all levels of engineering personnel.</li><li>The successful candidate, Saudi or Expatriate must obtain Saudi Council of Engineers (SCE) membership at the appropriate level, prior to starting the new role or commencing employment in KSA, SCE membership must be maintained throughout their employment in this role.</li><li>Experience working with ESS.</li><li>Broad Aerospace and defence company / industry knowledge.</li><li>An understanding of BAESSA engineering operating procedures.</li><li>Proven supervisory experience within the area of definition.</li></ul>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>JOB PURPOSE BAE Systems is the UK Government s nominated Prime Contractor under the Government-to-Government arrangements that are in place to provide equipment, support and training to Saudi Arabia. We provide maintenance of Royal Saudi Air Force (RSAF) aircraft and train RSAF and Royal Saudi Naval Force personnel safely in a training environment in how to use their aircraft, equipment and weapons. BAE Systems Saudi Arabia is committed to supporting the Saudi Arabian National Agenda including Saudisation and the training and development of Saudi National capability through the growth of the Saudi National Partner Companies thereby reinforcing Industrialisation and Partnerships. The Job Holder deputises for a senior company employee within the Typhoon Maintenance Organisation, responsible for the aspects of Parachute Fabrications Shop, compliance and continuous improvement while holding company line management responsibilities commensurate with the role, which includes; providing functional direction and guidance, exercising duty of care, welfare, health &amp; safety. Providing effective delivery of all activities as specified in the shop component repair plan. Support Salam Project success against the Maintenance Support Service contracted Operational Readiness (OR) and Key Performance Measurements (KPM)</p><p>Outline Responsibility</p><p>Safety: Uphold a safety-first approach, implementing safety measures and guidelines to protect personnel, product and operations. Support and promote Safety, Health &amp; Environment (SHE) and Product Safety &amp; Environment (PS&amp;E).</p><p>Compliance: Ensure adherence to BAE Systems Operational Framework, Life Cycle Management (LCM) practices, Maintenance &amp; Continuing Airworthiness (M&amp;CA) Mandates, Maintenance Organisation Exposition (MOE), and Royal Saudi Air Force (RSAF) Logistics Management Regulations (LMR) to meet the contractual obligations.</p><p>Support: Enhancing customer satisfaction in supporting maintenance, airworthiness, safety and continual improvement. Developing new ways to improve the customer experience or otherwise growing the maintenance organization as a whole. This includes highlighting potential new processes and procedures.</p><p>Continuous Improvements (CI): Strive for business excellence, by driving a culture of CI throughout the maintenance organization, encouraging innovative ideas and initiatives. Continuously seek opportunities to apply and adapt changes or improvements to best industry practices to enhance efficiency and effectiveness in the maintenance processes and create a sustainable future.</p><p>JOB ACCOUNTABILITIES</p><p>Accountable to their Primary Line Manager; however, they have direct access to Secondary Line Manager. This is to provide an independent route to address any issues within the Parachute Fabrications shop maintenance environment.</p><p>Undertake review of maintenance and challenge current practices and identify potential capacity for improvements within the organisation.</p><p>Recognising any malpractice that could affect the airworthiness or safety of the assigned components or personnel within their area of responsibility and raising the issue/concern to the Senior Maintenance Manager.</p><p>Ensuring that the necessary facilities resource are available, in accordance with company policies to enable their organisations to perform their duties and any contractual obligations.</p><p>Monitor standards of the personnel within their organisation in order to identify any negative trends, non-conformities or motivational deficiencies.</p><p>Accountable and responsible for all person s development reports within their direct and indirect line management, within their Area of Responsibility.</p><p>Providing a working environment to trust, where all employees of whom are professionals, each have a clear understanding of what standard of behaviour is considered acceptable or unacceptable, following the companies Code of Conduct .</p><p>Provide training, consolidation and counterpart development activities to the RSAF personnel and BAE Systems personnel.</p><p>Ensure all tasks are completed within designated timeframes to support Forward Maintenance and SMU activities.</p><p>Maintain operational readiness of shop equipment in line with the shop component repair plan and schedule necessary calibrations.</p><p>Enhanced by ensuring the correct tooling, approved data is available.</p><p>Raise appropriate media for deficiencies in approved data (e.g. TPRFs, TQs, etc.).</p><p>Any damage or deficiencies to equipment and infrastructure, are reported and monitored using the correct media (e.g. IDR, MDR, CAR, SORT, 1400-61, etc.).</p><p>Ensure that all personnel undertaking maintenance in their Area of Responsibility are authorised.</p><p>Maintain an anti-FOD surveillance and report potential hazards, which is further enhanced by the regular oversight checks of the shop and the components in the shop.</p><p>Ensure all maintenance tasks are carried out and meet the highest quality standards, including recording of maintenance carried out on the airworthiness tool consumables and POL.</p><p>Conduct oversight checks to ensure high standards of shop husbandry.</p><p>Ensure any forecasted planning, highlight any deficiencies or delivery/ FDD issues with consumables &amp; PPE are escalated to the primary line manager or secondary manager at the earliest opportunity.</p><p>Hold 2nd Signature and able to disperse the required responsibilities.</p><p>Maintain competency currency for Martin Baker Parachute Fabrications pack authorisations.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><h2>RECRUITMENT SPECIFICATION</h2><p><strong>Essential</strong></p><p>A recognised qualification to NVQ3/ONC/OND/BTEC level in a relevant technical discipline, or a technical apprenticeship, or suitable equivalent technical qualification acceptable to M&amp;CA.</p><p>Extensive proven post qualification practical maintenance experience within operational flying aircraft environment supported by formal recorded workplace applied related training OR substantial proven experience on same aircraft type.</p><p>Leadership skills and proven ability to supervise all levels of engineering personnel.</p><p>The successful candidate, Saudi or Expatriate must obtain Saudi Council of Engineers (SCE) membership at the appropriate level, prior to starting the new role or commencing employment in KSA, SCE membership must be maintained throughout their employment in this role.</p><p><strong>Desirable</strong></p><p>Thorough understanding of company processes and procedures</p><p>Broad aerospace and defence company / industry knowledge.</p><p>Proven supervisory experience within the area of definition.</p><p>An understanding of RAF and /or RSAF engineering operating procedures.</p><p>A track record of meeting strict deadlines without compromising standards and quality.</p><p>Previous experience of delivering work place training.</p><p>An understanding of ESS or similar electronic based reporting system.</p><p>Martin Baker Qualification.</p><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>S.NO<br>CRAFT<br>BRIEF Job Description<br>BASIC SALARY RANGE<br>FOOD&nbsp; ALLOWANCE<br><br>1<br>MILLWRIGHT TECHNICIAN<br>Candidate must be able to communicate in English - Mandatory.<br>1600 -2000<br>300<br><br>Diploma in Mechanical Engineering is required.<br><br>Minimum 2 to 3 years Petrochemical Plant Maintenance TA &amp; SD experience mandatory.<br><br>Ability to read drawings and instructions, to install /remove rotating equipment or parts<br><br>Ability to set, align and test runs rotating equipment<br><br>Ability to troubleshoot and analyze equipment problems and to request required spare parts<br><br>Knowledge on various types of mechanical seals and methods of repair/replacement<br><br>2<br>MECHANICAL TECHNICIAN<br>Candidate must be able to communicate in English - Mandatory.<br>1600 -2000<br>300<br><br>Diploma in Mechanical Engineering is required.<br><br>Minimum 2 to 3 years Petrochemical Plant Maintenance TA &amp; SD experience mandatory.<br><br>Inspect and diagnose the equipment faults and breakdown as requested<br><br>Ability to read drawings and instructions to manufacture the parts/system as required<br><br>3<br>INSTRUMENT TECHNICIAN<br>Candidate must be able to communicate in English - Mandatory.<br>2100-2400<br>300<br><br>Diploma in Electronics or Instrumentation Engineering.<br><br>Minimum 2 to 3 years Petrochemical Plant Maintenance TA &amp; SD experience mandatory.<br><br>Able to troubleshoot and repair plant instrument problems "pneumatics and electronics<br><br>Able to overhaul and repair of plant instruments such as control valves, controllers, transmitters, etc.<br><br>Read and understand instrument loop drawings and PID's<br><br>4<br>INDUSTRIAL ELECTRICAL TECHNICIAN<br>Candidate must be able to communicate in English - Mandatory.<br>2000-2200<br>300<br><br>Diploma in Electrical Engineering.<br><br>Minimum 2 to 3 years Petrochemical Plant Maintenance TA &amp; SD experience mandatory.<br><br>Repair of electric motors up to 500HP including replacement of bearings and seals, installation of motor and connection of starters and circuits<br><br>Demonstrated ability to read, interpret wiring schematics, troubleshoot and repair<br><br>5<br>HYDRAULIC TECHNICIAN<br>Candidate must be able to communicate in English - Mandatory.<br>2000-2200<br>300<br><br>Diploma in Mechanical Engineering is required.<br><br>Minimum 2 to 3 years Petrochemical Plant Maintenance TA &amp; SD experience mandatory.<br><br>Install, repair and maintain hydraulic equipment and machinery, such as lifts, cranes and forklift<br><br>Observe the equipment, operate diagnostic equipment and review technical manuals to identify the problem<br><br>6<br>WELDER CS &amp; SS/TIG<br>Candidate must be able to communicate in English - Mandatory.<br>2000-2500<br>300<br><br>Minimum 2 to 3 years Petrochemical Plant Maintenance TA &amp; SD experience mandatory.<br><br>TIG welders regulate gas flow and pressure by turning gas cylinder gauges or valves<br><br>Their role also entails reading and interpreting welding codes and blueprints<br><br>Welder continuity should be there.<br><br>Welder qualification SS &amp; CS&nbsp; must needed.<br><br>7<br>FABRICATORS<br>Candidate must be able to communicate in English - Mandatory.<br>1600-1800<br>300<br><br>ITI or Diploma is required.<br><br></span> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> No experience required </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><span><span>We are looking for an experienced Carpenter / Painter to support hotel engineering operations.</span></span><br><span><span>Your Role</span></span><br><span><span>As the Carpenter / Painter, you’ll perform carpentry and painting maintenance work to ensure hotel facilities are maintained to high standards.</span></span><br><span><span>Key Responsibilities</span></span><br><span><span>· Perform carpentry repairs and maintenance throughout the hotel</span></span><br><span><span>· Carry out painting and finishing work as required</span></span><br><span><span>· Inspect furniture, fixtures, and surfaces and identify maintenance needs</span></span><br><span><span>· Respond to maintenance requests in a timely manner</span></span><br><span><span>· Maintain tools, equipment, and work areas in good condition</span></span><br><span><span>· Follow safety procedures and engineering standards</span></span><br>&nbsp;</p><br><br><b>Qualifications:</b><br><p><span><span>Qualifications</span></span></p><br><p><br><span><span>· Previous experience as a Carpenter, Painter, or similar role, preferably in hospitality or facilities management</span></span><br><span><span>· Good knowledge of carpentry, painting, and finishing techniques</span></span><br><span><span>· Ability to perform repairs and maintenance work efficiently</span></span><br><span><span>· Understanding of preventive maintenance practices</span></span><br><span><span>· Knowledge of safety standards and procedures</span></span><br><span><span>· Good communication and organizational skills</span></span><br><span><span>· Ability to work under pressure and flexible shifts</span></span></p><br><p><span><span>· Excellent English Communication</span></span></p><br> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> 2+ years </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

<p>Role Purpose Serve as the operational owner of the Film Studio s physical assets, ensuring soundstages, workshops, backlots, offices, utilities, and supporting infrastructure remain safe, functional, compliant, and production-ready. The role is responsible for facilities oversight, asset performance tracking, vendor coordination, maintenance planning, and operational readiness across activation and steady-state studio operations.</p><p>Key Responsibilities</p><ul><li>Ensure all studio facilities, soundstages, workshops, backlots, offices, support spaces, and infrastructure remain operational and production-ready.</li><li>Oversee preventive and reactive maintenance activities, including MEP services, utilities, cleaning, waste management, and general site upkeep.</li><li>Manage facilities contractors, technical service providers, and specialist vendors against agreed SLAs, scope, quality, and response standards.</li><li>Maintain asset registers, maintenance schedules, condition reports, lifecycle plans, and performance dashboards.</li><li>Coordinate facilities readiness requirements for productions, tenants, workshops, events, and temporary installations.</li><li>Translate production and tenant requirements into facilities, utilities, logistics, site access, and operational readiness plans.</li><li>Support development-to-operations handover, commissioning close-out, defects tracking, and asset acceptance activities.</li><li>Monitor asset condition, equipment performance, service disruptions, and recurring maintenance issues.</li><li>Coordinate with HSE to ensure facilities operations comply with safety requirements and statutory obligations.</li><li>Coordinate with Security, IT, Finance, Procurement, and Corporate Enablement teams on operational dependencies and service continuity.</li><li>Support budget planning, maintenance cost tracking, asset lifecycle assumptions, and facilities-related procurement requirements.</li><li>Implement operating procedures, readiness checklists, inspection routines, and escalation protocols for facilities services.</li><li>Manage facilities-related incident reporting, corrective actions, and risk mitigation plans.</li><li>Prepare operational reports, maintenance dashboards, vendor performance updates, and asset performance insights for leadership.</li><li>Identify opportunities to improve reliability, cost efficiency, sustainability, and service quality across studio assets.</li></ul><p>KPIs</p><ul><li>Facility uptime and production readiness rate</li><li>Preventive maintenance completion rate</li><li>Reactive maintenance response and closure time</li><li>Vendor SLA compliance</li><li>Asset condition and lifecycle tracking accuracy</li><li>Number of unresolved facility-related incidents</li><li>Budget adherence for facilities operations</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor's degree in Facilities Management, Engineering, Construction Management, Property Management, or related field.</li><li>Facilities management, asset management, or engineering certification preferred.</li><li>7-10 years of experience in facilities management, technical asset management, property operations, or infrastructure operations.</li><li>Experience managing complex, asset-intensive, operational, entertainment, production, hospitality, or mixed-use environments preferred.</li><li>Experience supporting commissioning, operational readiness, and handover from development to operations preferred.</li><li>Preferred Background: Film studios, entertainment venues, destination assets, real estate operations, hospitality assets, industrial campuses, or technical facilities environments.</li><li>Experience managing MEP services, technical contractors, site readiness, and service provider performance preferred.</li><li>Strong knowledge of facilities management, MEP systems, utilities, preventive maintenance, and lifecycle planning.</li><li>Ability to manage vendors, SLAs, operational risks, inspections, and service continuity requirements.</li><li>Strong understanding of HSE, compliance, commissioning, handover, and operational readiness processes.</li><li>Strong reporting, coordination, and issue resolution capability in operational environments.</li></ul><p>Key Competencies</p><ul><li>Facilities management</li><li>Asset performance management</li><li>Vendor management</li><li>Operational readiness</li><li>Maintenance planning</li><li>Risk management</li></ul>

Job Purpose: -Responsible to the Manager Maintenance Planning for in the planning and preparation of maintenance production schedules that support the overall strategic plan and business objectives for the Maintenance Department, ensuring organizational effectiveness through goal attainment. This position’s role also supports other operational departments to ensure schedules and budgets are adhered to.<br>Functional: - To update and monitor daily routine and non-routine maintenance plans, including but not limited to Ads, SBs, checks and component removal and/or replacement.<br>Operational: - _Digitalizing day to day paperwork, process and execution to reduce human intervention and manual input to the system and processes. _Supervise maintenance activities to ensure strict compliance to aviation security cyber regulations._To plan the aircraft and its component to meet the airworthiness requirement of aircraft operation. Ensuring the aircraft is airworthy to operate._ To plan the task to be carried out on the aircraft at the most optimum schedule to ensure the availability of aircraft to meet the operational requirement._To provide planning support function and required data within M&E and to external stakeholder._To ensure all the tasks and checks to be carried out in the most time and cost-efficient manner.<br> Academic Qualifications and Professional Experience: - <br>Academic Qualifications - Bachelors, Major Aviation Professional Experience - 3-5 years in related field