Heavy equipment mechanical engineer Jobs - Al Ahsa Saudi

<ul><li>Safely attach loads to cranes and other lifting devices using appropriate rigging equipment, ensuring secure and balanced configurations.</li><li>Inspect and maintain all rigging gear, including slings, shackles, and hooks, to guarantee operational readiness and prevent failures.</li><li>Operate and control rigging equipment as directed, following precise signals and communication protocols with the crane operator.</li><li>Understand and interpret load charts and weight calculations to prevent overloading and ensure stability during lifts.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>must have a Saudi Aramco-approved Work Permit</p></li><li><p>Minimum of 4 years of hands-on experience in industrial or construction rigging.</p></li></ul>

Libera Consultants is supporting a leading drilling contractor in Saudi Arabia in the search for an experienced Rig Superintendent to support its land drilling operations.<br>This is a senior site-based leadership role with overall accountability for the safe, efficient and compliant execution of onshore drilling operations. You will provide day-to-day operational leadership on a land rig, guiding multiple disciplines to ensure performance, safety and operational integrity are consistently delivered.<br>Key Responsibilities:Take full operational responsibility for day-to-day rig performance, ensuring drilling activities are executed safely, efficiently and in line with programmed objectives. Drive operational discipline across drilling, maintenance and support teams to maximize rig uptime and performance. Act as the primary site leader, ensuring clear alignment between rig operations and onshore management teams. Coordinate the delivery of materials, services and specialist support to maintain uninterrupted drilling operations. Ensure drilling fluid systems, well control practices and pressure control procedures are correctly applied and continuously monitored. Maintain oversight of critical well control equipment, including testing regimes, readiness status and compliance requirements. Lead and manage rig move execution on land locations, ensuring planning is translated into safe and efficient field operations. Champion proactive maintenance practices, ensuring equipment reliability, readiness and proper inventory control of critical spares and consumables. Provide leadership during non-routine operations and emergency situations, ensuring structured and controlled response actions. Conduct regular operational audits and site inspections, ensuring risks are identified early and corrective actions are closed out effectively. Develop, mentor and support rig crews, reinforcing strong safety behaviors and continuous performance improvement. Maintain accurate operational reporting and ensure clear communication with all internal and external stakeholders.<br>Candidate Profile We're looking for an experienced drilling professional with:10–15 years' operational experience in onshore (land) drilling operations, including at least 2–3 years' experience as a Rig Superintendent. Strong knowledge of drilling operations, well construction and the wider oil and gas industry. Experience working with top drive systems and mechanical and/or AC/DC drilling rigs. High school diploma, technical qualification or bachelor's degree (or equivalent). Good written and spoken English. Competent user of Microsoft Office and standard operational reporting systems.<br>Essential Certification Valid IWCF Well Control Certificate – Supervisor Level.<br>Location: Saudi Arabia (field rotation)

Job Summary <br>The role holder is responsible for performing electrical maintenance and repair activities, including the troubleshooting of electrical systems, conducting corrective and preventive maintenance, and assisting in the installation and commissioning of electrical equipment. Key Accountabilities<br>Electrical Maintenance Inspect, troubleshoot, and repair electrical systems, equipment, and machinery in accordance with applicable safety and maintenance standards to always ensure availability of systems. Conduct preventive maintenance activities on electrical systems, including testing, cleaning, and lubrication to ensure that the electrical equipment in the plant is operating properly according to established specifications in coordination with the operations team. Conduct preventive maintenance on electrical equipment in plants according to established schedule and maintenance cycle to avoid system/equipment issues. Diagnose and rectify electrical faults, malfunctions, and breakdowns in a timely manner to minimize downtime. Utilize electrical testing equipment and tools to perform accurate measurements and assessments. Highlight major maintenance requirements to the supervisor in order to schedule corrective maintenance within the suggested / accepted timeframe.<br>Installation and Commissioning Interpret electrical drawings, schematics, and specifications and assist in the installation to ensure proper installation and connection of equipment. Collaborate with the Electrical Foreman and other technicians in planning and executing installation projects. Verify and ensure compliance with electrical codes, regulations, and safety standards during installation activities. Calibrate electrical instruments and devices, such as meters, gauges, and controllers, to maintain accuracy and reliability.<br><br>Qualifications, Experience & Skills:<br>Minimum Qualifications:Diploma in Electrical Engineering or Electrical Technolgy/ Electrical Power Minimum Experience:More than 1 years of experience in Plant Electrical Maintenance. Job-Specific Skills:High voltage substation testing and commissioning Good level of understanding English and ability to express self. Knowledge of electrical systems, equipment, and components, including motors, transformers, switchgear, and control panels. Proficiency in reading and interpreting electrical drawings, schematics, and technical manuals. Familiarity with electrical testing equipment, tools, and troubleshooting techniques. Understanding of electrical codes, regulations, and safety practices. Effective communication and interpersonal skills to collaborate with team members and stakeholders. Ability to work independently and as part of a team, with a strong sense of accountability and attention to detail. Good knowledge and expertise in electrical equipment testing including transformers, switchgears, motors, starters etc. Experience in using and handling electrical test equipment (Freja, CPC 100, DLRO, motor winding analyzer etc) Protection relay configuration and testing

<strong>A Snapshot of Your Day<br><br></strong>To ensure that all steam turbine and generator maintenance, overhaul, repair, installation, commissioning, and field service activities are performed in accordance with contract requirements, industry standards, OEM specifications, quality management systems, and customer expectations. The QA/QC Engineer is responsible for implementing quality control processes, conducting inspections, managing non-conformities, and driving continuous improvement to achieve zero-defect execution and high customer satisfaction.<br><br><strong>How You’ll Make An Impact<br><br></strong><ul><li>Implement and maintain the Quality Management System (QMS) in accordance with ISO 9001 requirements. Develop and monitor Quality Plans, Inspection and Test Plans (ITPs), Quality Control Procedures, and Method Statements.</li><li>Ensure compliance with project specifications, customer requirements, OEM standards, and applicable industry codes. Support internal and external quality audits and facilitate corrective and preventive actions.</li><li>Perform and coordinate inspections during turbine and generator dismantling, repair, assembly, alignment, and commissioning activities. Verify critical dimensions, clearances, tolerances, and technical parameters against OEM requirements.</li><li>Review and approve inspection reports, checklists, measurement records, and quality documentation. Monitor calibration status of measuring and testing equipment.</li><li>Witness and verify rotor and stator inspections, turbine blade inspections, journal and thrust bearing inspections, shaft runout measurements, alignment and coupling checks, NDT activities (PT, MT, UT, ET, VT), dynamic balancing activities, generator electrical tests, performance and commissioning tests</li><li>Identify, document, and investigate quality issues and non-conformities. Raise NCRs (Non-Conformance Reports) and monitor their closure. </li><li>Conduct root cause analysis using methodologies such as 5 Whys, Fishbone Diagram, FMEA</li><li>Implement corrective and preventive actions (CAPA).</li><li>Serve as the quality focal point for customers during inspections and audits. Coordinate with vendors and subcontractors to ensure compliance with quality requirements. Support customer inspections, FATs, and site acceptance activities.</li><li>Maintain quality records and inspection dossiers. Prepare quality reports, KPI dashboards, and lessons learned. Ensure complete traceability of repair and inspection records.<br><br><br></li></ul><strong>What You Bring<br><br></strong><ul><li>Bachelor's Degree in Mechanical Engineering, Electrical Engineering, Industrial Engineering, or related discipline with 5–10 years of experience in QA/QC within: steam Turbine Services, Generator Services, Power Plant Maintenance, Rotating Equipment Maintenance</li><li> Experience with major OEM equipment such as Siemens Energy, GE, Mitsubishi Power, Ansaldo, Toshiba, or Alstom is preferred. </li><li> Understanding steam turbine construction and operation is essential, including rotor and blade inspection techniques. Knowledge of bearing systems, steam path assessment, and turbine alignment and assembly procedures is crucial for maintaining efficiency and performance.</li><li> Proficiency in generator knowledge involves rotor and stator inspection, electrical testing, and diagnostics. Familiarity with generator assembly, commissioning processes, and insulation systems, as well as the differences between air- and hydrogen-cooled generators, is important for effective management.</li><li> Knowledge of ISO 9001 Quality Management Systems is fundamental for maintaining quality standards. Skills in developing Inspection and Test Plans (ITPs), quality auditing, root cause analysis, and statistical process control are essential for ensuring compliance and continuous improvement.</li><li> A solid understanding of Non-Destructive Testing (NDT) methods, including Visual Testing (VT), Magnetic Particle Testing (MT), Liquid Penetrant Testing (PT), Ultrasonic Testing (UT), and Eddy Current Testing (ET), is crucial for detecting flaws and ensuring component reliability.</li><li> Familiarity with precision measurement tools, such as micrometers, bore gauges, and dial indicators, is essential for accurate assessments. Expertise in laser alignment systems and other precision instruments is necessary for maintaining quality and performance standards.</li><li> Desired certifications include ISO 9001 Internal Auditor / Lead Auditor, ASNT Level II (VT/PT/MT/UT), NACE/Coating Inspection Certification (desirable), Six Sigma Green Belt (preferred), API Q1/Quality Training (advantageous)</li><li> Possesses strong analytical and problem-solving skills, enabling them to tackle complex challenges effectively. A high attention to detail ensures accuracy in all tasks, while a customer-focused mindset prioritizes client satisfaction. </li><li> Effective communication and reporting skills facilitate clear information sharing, and teamwork and collaboration foster a positive work environment. </li><li> Leadership and mentoring capability are essential for guiding team members, while the ability to make decisions under pressure is crucial in fast-paced situations. Continuous improvement orientation drives the pursuit of excellence and innovation in processes and outcomes.<br><br><br></li></ul><strong>About The Team<br><br></strong>Our Gas Services division offers Low-emission power generation through service and decarbonization. Zero or low emission power generation and all gas turbines under one roof, steam turbines and generators. Decarbonization opportunities through service offerings, modernization, and digitalization of the fleet.<br><br><strong>Who is Siemens Energy?<br><br></strong>At Siemens Energy, we are more than just an energy technology company. With ~100,000 dedicated employees in more than 90 countries, we develop the energy systems of the future, ensuring that the growing energy demand of the global community is met reliably and sustainably. The technologies created in our research departments and factories drive the energy transition and provide the base for one sixth of the world's electricity generation.<br><br>Our global team is committed to making sustainable, reliable, and affordable energy a reality by pushing the boundaries of what is possible. We uphold a 150-year legacy of innovation that encourages our search for people who will support our focus on decarbonization, new technologies, and energy transformation.<br><br>Find out how you can make a difference at Siemens Energy: https://www.siemens-energy.com/employeevideo<br><br><strong>Our Commitment to Diversity<br><br></strong>Lucky for us, we are not all the same. Through diversity we generate power. We run on inclusion and our combined creative energy is fueled by over 130 nationalities. Siemens Energy celebrates character – no matter what ethnic background, gender, age, religion, identity, or disability. We energize society, all of society, and we do not discriminate based on our differences.<br><br><strong>Rewards/Benefits<br><br></strong><ul><li>Opportunity to work on challenging projects in an exciting environment</li><li> Opportunity for remote/flexible work</li><li> Professional support and strong collaboration with colleagues around the world</li><li> Professional development opportunities within the company<br><br><br></li></ul>https://jobs.siemens-energy.com/jobs<br><br>

Department Manager, Electrical<br>Responsibilities:<br>FUNCTIONALRESPONSIBILITIES<br>Coordinates with Principal Electrical Engineer to ensure correct implementation of the project design and coordinates the work of Lead Engineers. Prepares and reviews electrical engineering studies, design drawings and documents, and materials and equipment specifications. Resolves specialty related electrical engineering issues by applying accepted principles, codes, and standards. Establishes scope of work for each project or proposal. Schedules and expedites work of department. Develops organizational procedures, methods and controls. Ensures quality and safety standards and procedures are followed. Coordinates activities with other departments and clients. Determines the need for investigation and research. Participates in the development of long-range plans. Establishes project objectives and priorities. Provides expert advice on electrical engineering design, process and other methods.<br>AUTHORITY/LEADERSHIP RESPONSIBILITIES<br>Makes staffing decisions and provides employees with training and development opportunities. Proposes and manages department budget and participating in development of unit budget. Proposes and manages quality and participates in the development of procedures. Makes recommendations concerning salary adjustments and performance evaluations. Approves timesheets.<br>Requirements:<br>BS in Engineering and registered as a professional engineer with significant experience of 25 years. With Master’s Degree is desirable. Has experience in the oil/gas, hydrocarbon, refinery, offshore, or infrastructure industries and is recognized as specialist in electrical engineering field on large to mega projects. Must have thorough knowledge of electrical engineering practices and economic principles, calculation protection methods, design details, international codes and standards, procedures, and specifications.

<strong>Summary Of The Role<br><br></strong>We are seeking a skilled and motivated <strong>Mechanic Technician</strong> experianced in SPMT repairs &amp; maintenance to join our team. You will be responsible for inspecting, troubleshooting, repairing, and maintaining mechanical equipment and machinery to ensure safe and efficient operations. The role requires strong technical knowledge, hands-on experience, and the ability to work effectively in a team environment.<br><br><strong>What You’ll Be Doing<br><br></strong><ul><li>Perform preventive and corrective maintenance on mechanical equipment.</li><li>Perform equipment maintenance and trouble shooting ( Demag / Liebherr /Sany / Kobelco ) cranes and SPMT trailers .</li><li>Diagnose and troubleshoot mechanical faults.</li><li>Repair and replace defective components and parts.</li><li>Conduct inspections and testing to ensure equipment reliability.</li><li>Follow safety procedures and company standards at all times.</li><li>Maintain accurate maintenance records and reports.</li><li>Support operational teams in minimizing equipment downtime.<br><br><br></li></ul><strong>What You’ll Need<br><br></strong><ul><li>Diploma or Technical Certificate in Mechanical Engineering or a related field.</li><li>Experience as a Mechanic Technician or in a similar maintenance role.</li><li>Knowledge of mechanical systems, tools, and equipment.</li><li>Ability to read and interpret technical drawings and manuals.</li><li>Good troubleshooting and problem-solving skills.</li><li>Strong commitment to safety and quality standards.<br><br><br></li></ul><strong>What You’ll Get<br><br></strong>Challenging and engaging role with relatively complex tasks with exposure towards mechanics<br><br><strong>WANT TO KNOW MORE?<br><br></strong>Get in touch – email hr.ksa@mammoet.com<br><br>Take a look at mammoet.com

GENERAL MANAGERWesteel Metal Industries I. L. L. C. Location: Dammam, Saudi Arabia Industry: Steel Fabrication / Structural Steel / Pre-Engineered Buildings (PEB) Position: General Manager Reporting To: Executive Management / Shareholders About Westeel Westeel Metal Industries is a growing steel fabrication and pre-engineered building company serving industrial, commercial, energy, infrastructure, and general construction sectors. With operations serving Saudi Arabia and Syria, Westeel is focused on developing a strong regional manufacturing platform built around engineering capability, efficient production, competitive procurement, strict quality control, reliable project delivery, and long-term customer relationships. As the business continues to expand its production capacity and market presence, Westeel is seeking an experienced and commercially driven General Manager to lead the company through its next stage of growth. Position Objective The General Manager will have overall responsibility for the performance of Westeel, including sales, estimation, engineering, procurement, production, project execution, quality, financial performance, workforce productivity, and business development. The successful candidate must be capable of running the company as a complete business—not simply managing factory operations. The GM will be expected to establish clear targets, build a strong management team, improve systems and controls, increase production efficiency, expand Westeel's customer base, and ensure that projects are delivered profitably, safely, on time, and to the required quality standards. Key Responsibilities Business Leadership & P&LTake full responsibility for Westeel's operational and financial performance. Develop and implement the company's annual business plan, budget, revenue targets, production targets, and profitability objectives. Monitor revenue, gross margin, overheads, cash flow, receivables, production costs, and overall profitability. Provide management with clear monthly reporting covering commercial, operational, production, and financial performance. Identify underperformance early and implement corrective actions. Build scalable systems and organizational structures capable of supporting significant future growth. Sales & Business Development Lead the commercial growth of Westeel across Saudi Arabia and regional markets. Develop strong relationships with EPC contractors, industrial companies, developers, consultants, government entities, and major private-sector clients. Build and manage a structured sales pipeline. Ensure the sales team actively develops new customers rather than depending solely on existing relationships or incoming inquiries. Review major quotations, commercial proposals, and contract negotiations. Ensure projects are selected based on profitability, capacity, strategic value, and commercial risk. Support development of long-term framework agreements and strategic customer relationships. Estimation & Commercial Control Ensure accurate estimation of steel tonnage, material cost, fabrication hours, engineering cost, transport, erection, subcontracting, overhead, and project risk. Establish strong tender review and bid approval procedures. Ensure quotations reflect realistic production and procurement costs. Monitor estimated versus actual project costs and use completed-project data to improve future estimates. Protect company margins during contract negotiation and project execution. Prevent uncontrolled discounts, scope gaps, and commercially weak commitments. Engineering & PEBOversee structural steel and PEB engineering functions. Ensure designs are optimized for safety, constructability, fabrication efficiency, and steel weight. Promote value engineering and economical structural solutions. Ensure engineering deliverables are completed according to project schedules. Strengthen coordination between engineering, estimation, procurement, production, and site teams. Ensure compliance with applicable international and local codes and customer specifications. Manufacturing & Production Take overall responsibility for factory production performance. Establish clear weekly and monthly production targets measured in tonnes, fabrication hours, utilization, productivity, and delivery performance. Improve factory workflow from raw material receiving through cutting, drilling, fitting, welding, blasting, painting, packing, and dispatch. Minimize bottlenecks, idle manpower, excessive overtime, rework, and material waste. Ensure proper production planning and capacity allocation between projects. Develop measurable productivity benchmarks for each production activity. Drive continuous improvement and increasing automation within the factory. Ensure machinery and equipment are properly utilized, maintained, and upgraded when commercially justified. Procurement & Supply Chain Develop reliable sources for structural steel plates, coils, beams, channels, angles, consumables, paint systems, fasteners, and other required materials. Establish strong supplier qualification and procurement controls. Maintain competitive sourcing without compromising material quality or delivery reliability. Reduce dependence on single suppliers. Negotiate strategic supply agreements where appropriate. Coordinate procurement closely with production schedules to minimize shortages and excessive inventory. Ensure traceability of materials and compliance with project specifications. Project Delivery Maintain oversight of major projects from award through engineering, procurement, fabrication, delivery, erection, completion, and collection. Ensure contractual milestones are achieved. Monitor project schedules and intervene before delays become critical. Ensure clear responsibility between factory, project management, logistics, and erection teams. Maintain strong relationships with clients throughout project execution. Ensure variations and additional works are properly documented and commercially recovered. Quality, HSE & Compliance Maintain a strong quality-management culture throughout the organization. Ensure fabrication complies with approved drawings, welding procedures, inspection requirements, material specifications, and applicable standards. Reduce NCRs, customer complaints, rejected material, repair welding, and rework. Maintain proper welding qualifications, inspection records, material certificates, traceability, and quality documentation. Ensure strong HSE standards across factory and project sites. Ensure company operations comply with regulatory, contractual, and internal governance requirements. People & Organization Build a competent and accountable management team. Define clear responsibilities and reporting lines across departments. Establish KPIs for department heads and key personnel. Conduct structured management and performance-review meetings. Identify skills gaps and recruit strong technical and commercial personnel where required. Develop internal talent and succession planning. Create a culture based on accountability, urgency, teamwork, transparency, and measurable performance. Take corrective action where persistent underperformance exists. Key Performance Indicators Performance will be evaluated against measurable business results including:Annual revenue and sales growth Gross profit and net profitability Steel tonnage sold and fabricated Factory productivity and utilization Production cost per tonne Material utilization and scrap percentage On-time project completion Engineering turnaround time Procurement savings and material availability Customer acquisition and repeat business Tender conversion rate Accounts receivable and cash collection Reduction in rework and NCRsEmployee productivity HSE performance Candidate Requirements The ideal candidate should have:Bachelor's degree in Mechanical Engineering, Civil/Structural Engineering, Industrial Engineering, or a related discipline. MBA or postgraduate business qualification is an advantage. Minimum 15 years of relevant experience, preferably within structural steel fabrication, PEB, heavy fabrication, or industrial manufacturing. Minimum 5 years in a senior management, General Manager, Plant Head, Business Unit Head, or equivalent leadership position. Strong understanding of structural steel fabrication and PEB operations. Demonstrated experience managing a manufacturing P&L. Strong knowledge of steel procurement, fabrication economics, production planning, and project execution. Commercial experience in estimation, tendering, contract negotiation, and business development. Strong understanding of manufacturing productivity and cost control. Experience managing engineering, factory operations, commercial teams, and project execution under one organization. Strong leadership and organizational-development capabilities. Excellent communication and negotiation skills. Strong command of English. Experience in Saudi Arabia or the GCC steel/construction market is highly preferred. Preferred Industry Background Candidates from organizations involved in:Pre-engineered buildings Structural steel fabrication Heavy steel fabrication Industrial steel structures Oil & gas fabrication EPC manufacturing Steel buildings Warehouses and industrial facilities Large-scale metal manufacturingwill be strongly preferred. Candidate Profile Westeel is looking for a hands-on business leader, not an office-based administrator. The successful candidate should be comfortable moving between the factory floor, engineering department, commercial meetings, project reviews, suppliers, and major customers. The individual must understand both sides of the business:how to manufacture steel efficiently and how to sell it profitably. The GM will be expected to build systems, challenge inefficiencies, develop people, generate business, protect margins, and take ownership of results. This position is suitable for a senior steel-industry professional who wants the opportunity to lead and substantially grow an ambitious regional manufacturing business.

Job Sope:<br>As Electrical Maintenance Engineering Supervisor, you will be leading a team of Electrical Maintenance Engineers, QA/QC Engineers and Planners to drive the implementation of Power Systems maintenance strategy.<br>Key Responsibilities:<br>Provide technical guidance and support to electrical maintenance teams and other departments pertaining to the maintenance of all electrical equipment including steam turbine generators, emergency diesel generators, transformers, 480V to 230k V switchgear, UPS and battery chargers, HV and LV VSD and motors to ensure high plant availability and equipment integrity. Mentor and guide the team (electrical maintenance personnel and contractors) in execution of electrical maintenance and lead personnel qualification, certification and accreditation initiatives. Provide good documentation to ensure all equipment technical records and drawings are updated to reflect the latest changes, maintenance history and PM reports are uploaded, configuration and software changes to electrical equipment are documented, archived, and backed up. Be the department's Safety Champion by fostering safety culture and ensuring that safety measures are embedded in all electrical equipment, procedures and tasks. Prepare regular reports on electrical system performance, maintenance KPIs and departmental metrics. Prepare job specifications and costing for out-sourced maintenance activities, technically evaluate vendors and contractors, participate in contracts review and highlight opportunities for contracts optimization. Propose and implement innovative ideas in productivity (Wrench Time), efficiency, sustainability, and digitalization through analyzing and evaluating maintenance KPI data. Lead incident investigations, RCAs and investigate and analyze CM work orders to identify the true causes of defects. Constantly engage with Area Maintenance Foremen, original equipment manufacturers, vendors to modify the maintenance Work Instructions as recommended/required by Field Maintenance personnel. Review electrical maintenance plan and highlight potential constraints for PM jobs execution, review PM deferment requests and participate in Turnaround scope development. Witness the commissioning and testing of electrical equipment and lead electrical site functional tests and sign-off. Participate in Pre-Startup Safety Reviews (PSSR), substations energization and handover.<br>Minimum Requirements:<br>Bachelor's Degree in Electrical Engineering A minimum of 10 years of relevant experience in Maintenance in oil & gas, petrochemical or related industries with 3-5 years in supervisory role. Knowledge in international and local standards such as IEEE, IEC, NFPA and Grid Code is an advantage. Proven ability to diagnose and troubleshoot equipment failures and knowledge of field testing requirements for new installations. SAP Knowledge in Maintenance Module. Excellent communication, analytical, problem-solving, and troubleshooting skills. Self-motivated with a strong commitment to teamwork and collaboration with other stakeholders.

We are looking for qualified Firefighters to join our client's emergency response team in the Eastern Province. The role involves responding to fire and emergency incidents, operating firefighting equipment, supporting emergency preparedness activities, and ensuring the readiness of personnel and equipment in accordance with company procedures and applicable fire safety standards.<br>Key Responsibilities Respond promptly to fire, rescue, hazardous materials, and other emergency incidents within the designated area to protect life, property, and the environment. Perform firefighting, rescue, containment, and emergency control activities using appropriate equipment and established procedures. Follow company fire protection policies, standard operating procedures, emergency response plans, and applicable Saudi fire safety requirements. Participate in scheduled emergency response drills, training exercises, and reviews or updates of Emergency Response Plans. Inspect, maintain, and ensure the operational readiness of firefighting vehicles, breathing apparatus, protective equipment, tools, and other emergency response equipment. Respond to hazardous materials incidents using appropriate personal protective equipment and established Hazmat response procedures. Coordinate with firefighters, emergency response personnel, operations teams, and relevant authorities during emergency situations. Prepare timely and accurate reports on fire incidents, emergency response activities, equipment inspections, drills, and other assigned activities. Requirements High School Diploma or Diploma in Firefighting, Fire & Safety, or a related field. Previous professional experience as a Firefighter in industrial, commercial, residential, drilling, or similar emergency response environments. NFPA 1001 - Fire Fighter I & II certification is required. NFPA 472 - Hazmat Awareness & Operations (A&O) certification is required. Good knowledge of fire emergency response, hazardous materials, technical rescue, fire prevention, and fire safety procedures. Ability to participate in emergency drills, emergency response planning, and maintain readiness of firefighting personnel and equipment. Good English proficiency. Knowledge of applicable Saudi fire safety standards and requirements. Ability to work in emergency response environments and follow safety procedures. <br>Preferred Qualifications Experience in Oil & Gas, petrochemical, industrial, drilling, or similar high-risk environments. Experience with industrial firefighting vehicles, pumps, hoses, breathing apparatus, and rescue equipment. NFPA 1002 - Fire Apparatus Driver/Operator Professional certification is preferred for candidates assigned to Fire Apparatus Pump Operator responsibilities. Experience participating in emergency response drills and fire risk mitigation activities.

<h3><strong>About the Opportunity</strong></h3><p>Eram Talent is seeking a qualified and detail-oriented <strong>Building Inspector</strong> to join our team in Dammam, Eastern Province, Saudi Arabia. This full-time position offers an opportunity to contribute to ensuring compliance with building standards and requirements across various projects.</p><h3><strong>Role Overview</strong></h3><p>The Building Inspector will be responsible for conducting comprehensive building inspections, identifying potential issues, and ensuring strict adherence to applicable standards and regulations. This role involves critical assessment and clear communication of findings to maintain quality and safety within construction and development projects.</p><h3><strong>Key Responsibilities</strong></h3><ul><li>Conduct thorough building inspections in accordance with established protocols and regulatory guidelines.</li><li>Ensure strict compliance with all applicable building standards, codes, and project requirements.</li><li>Communicate inspection findings clearly and effectively to relevant stakeholders, including contractors, engineers, and project teams.</li><li>Prepare detailed and accurate reports documenting all inspection findings, observations, and recommendations.</li><li>Identify and report building-related issues, deficiencies, and instances of non-compliance with established codes.</li><li>Collaborate professionally with contractors, engineers, project teams, and other involved parties to resolve identified issues.</li><li>Manage all aspects of inspections, reporting, and technical documentation with a high degree of professionalism and accuracy.</li></ul><h3><strong>Qualifications and Experience</strong></h3><ul><li>A minimum of <strong>3 years of relevant professional experience</strong> in a similar capacity.</li><li>Associate Degree in Civil Engineering or Mechanical Engineering.</li><li>Previous experience specifically in building inspection is preferred.</li></ul><h3><strong>Work Setting and Location</strong></h3><p>This is a full-time position based in Dammam, Eastern Province, Saudi Arabia. The role requires on-site presence for inspections and collaborative work within various project environments.</p><h3><strong>Application Information</strong></h3><p>Qualified candidates are invited to submit their applications for this Building Inspector role at Eram Talent.</p>

At Air Products, we reimagine what’s possible. By tapping into the motivation of our people and our collective experience, we create the ideas and innovations that drive us forward. When we come together – where every voice is heard and everyone knows they belong and matter – we create solutions that launch people into space, support lifesaving care in hospitals, and enable the construction of groundbreaking, world scale production facilities.<br><br>Reimagine What’s Possible <br><br>The HYCO Shift Supervisor is accountable for managing and supervising the operations staff which include Boardman, Lead Operators and Field Operators for the facility having two HYCO Steam Methane Reformer, one Off-Gas PSA facility & Hydrogen Import Pipeline Facility. The HYCO Shift Supervisor will manage the day-to-day shift operations which include daily customer production meetings, insuring daily operational targets are achieved, interfacing with the Maintenance and Engineering teams to ensure the safe and reliable operation of the site. The HYCO Shift Supervisor will be responsible to ensure the Operations staff is properly trained to support the operations in addition to the incumbent execute daily tasks which include preparing and implementing safety work permits, LOTO, complete operations preventative maintenance activities, and assist the maintenance and engineering teams in preparing and executing corrective maintenance activities. This position is an extension of the operating team and is expected to engage in all plant operations and ensure tasks performed safely.<br><br>Safety<br><br>PRINCIPAL ACCOUNTABILITIES:<br><br>Provide & maintain a safe work environment. Demonstrate leadership with all company & industry safe work processes to prevent injuries.<br><br>Technical<br><br>Provide direction to the staff of the HYCO Steam Methane Reformer unit and ancillary equipment as prescribed by the Work Instruction Procedures. Operate the unit when required. Provide direction & guidance based on technical feedback from Assistant Site Manager, Site Manager, Engineering and Maintenance for troubleshooting, maintenance, repair, and test activities. Provide Operations support, guidance & lead the team during the startups, shutdowns and emergencies of the plants. Maintain accurate document control and monitor quality assurance initiatives. Provide Operations guidance to ensure safety, reliability and maintainability of equipment, processes, utilities, facilities, controls, and safety/security systems. Provide Operations input for scheduled outages to ensure contractual requirements are achieved Manage plant production efficiently based on data driven decisions to ensure safety and reliability targets are met to achieve maximum profitable. Work closely with Shift Team, Assistant Site Manager, Site Manager, Maintenance Team and Engineering team to ensure production targets are achieved in his shift, plant running at optimum energy efficiency and safely.<br><br>Operations<br><br>Ensure the safety of all operations personnel by utilizing the APQ Basic Safety Practice program, which includes Safety Work Permits, LOTO, Confined Space, etc. The position facilitates planning, organizing, auditing, and follow-up, to build the Air Products safety culture into the APQ. Ensure all Environmental Regulatory requirements are met. Ensure compliance to all CM, PM tasks. Support and prepare for Shutdown Planning and Turnaround Planning. Ensure Air Products and APQ standards, and global best practices for EH&S, productivity, reliability, quality, and overall customer services are met Meet the customer’s satisfaction on safety, reliability, product quality, and flexibility on product supply. Build the plant technical capability through support coordination from Assistant Site Manager, Site Manager, Maintenance Team and Engineering team. Provide coaching and motivation to the operations team to achieve operational excellence and customer satisfaction. Develop, train, and promote top performing personnel who achieve success through teams, customer and employee focused, foster open communication, performance driven, and results oriented. Establish & maintain close working relationships with engineering and maintenance personnel to continuously monitor & evaluate plant systems & equipment through a Plant Process Advisory Model. Provide operations support and participate / lead incident investigations and Root Cause Analysis. Identify & implement sustainable corrective action(s). Act as the Single Point of Contact when dealing with internal issues of the HYCO units, representing APQ and coordinating internal resources. Provide timely progress updates to the customer. Facilitate attainment of operations excellence and customer satisfaction via operations productivity, reliability, quality, cost reduction, services, continuous improvements, and meeting of budgets. Maintain a relationship with the customer’s counterparts from other Refinery Units where from APQ either receiving Feedstock, Utilities & Power or supplying Hydrogen and Steam to different Refinery Units on a regular basis through Refinery Shift Superintendent to ensure alignment of expectations for APQ and the customers current and future product demand.<br><br>Job Requirements<br><br>Bachelor’s degree in chemical, Mechanical, or Chemical Process Operations preferred. An associate technical degree (2 year certificate) will be considered based on years of experience and competence. Experience in gas, petrochemical, or related industries in operations, engineering, and/or a maintenance function. Demonstrated HYCO knowledge a plus, with a minimum of 10 years’ experience with 4 + years in line supervision of process operations roles. Expectation based on level of experience for the operations team to achieve a ‘Level 1 / Board Level’ status within 2 – 4 years. Operators will be evaluated during the training period and placed at the level of competence accordingly. All the operations team are considered field and board operators when Level 1 is achieved. Leadership positions are expected to follow the progression process. The HYCO Operations Supervisor is an extension of the operating team and is expected to engage in plant operations when required. Proven coordination experience in a multi team environment which includes operations, engineering, and maintenance. Good leadership, interpersonal and teamwork skills with the ability to communicate clearly and effectively throughout all levels within the organization and externally. Promotes a ‘one team’ environment. Ability to communicate and manage customer interactions on a daily basis. Wide technical knowledge in operations, engineering, and maintenance activities. Proficiency in English speaking and writing. Knowledge and understanding of local environmental and health and safety requirements.<br><br>Founded in 1940, Air Products is a world-leading industrial gases company and has a proud history of innovation, operational excellence, with an unwavering commitment to safety and environmental stewardship. Working together, we are taking our passion and diverse backgrounds forward to reimagine what’s possible and generate a cleaner future for our customers, our communities, and the world.

Job Title: Rigging Instructor Location: Dammam, Saudi Arabia Employment Type: Contract (Payroll managed through our partnering firm - Prime Innovation) Contract Duration : 3 Months (Extendable)<br>We are currently seeking an experienced Rigging Instructor to deliver technical training programs in Rigging and Lifting Operations for a training project in Dammam, Saudi Arabia.<br>Key Responsibilities<br>Deliver classroom and practical training in Rigging and Lifting Operations Conduct competency-based training and trainee assessments Develop and update training materials, presentations, and practical exercises Support development of written and practical tests for training programs Ensure workshop and training equipment are suitable for practical training Deliver technical presentations and support continuous improvement of training programs<br>Requirements<br>Minimum 5+ years industrial experience in sectors such as Oil & Gas, Construction, Mining, Power Generation, or Heavy Industry Strong experience in rigging and lifting operations Good communication and training skills for classroom and practical sessions Proficiency in Microsoft Office and training documentation<br>Preferred<br>Associate or Bachelor’s Degree in Industrial / Technical or related field Training or teaching experience Certifications such as LEEA, OPITO, NCCCO, or IADC in Rigging / Lifting Operations Instructor / Assessor accreditation in Rigging or Lifting Programs

Job Title: Rigging Instructor Location: Dammam, Saudi Arabia Employment Type: Contract (Payroll managed through our partnering firm - Prime Innovation) Contract Duration : 3 Months (Extendable)<br>We are currently seeking an experienced Rigging Instructor to deliver technical training programs in Rigging and Lifting Operations for a training project in Dammam, Saudi Arabia.<br>Key Responsibilities<br>Deliver classroom and practical training in Rigging and Lifting Operations Conduct competency-based training and trainee assessments Develop and update training materials, presentations, and practical exercises Support development of written and practical tests for training programs Ensure workshop and training equipment are suitable for practical training Deliver technical presentations and support continuous improvement of training programs<br>Requirements<br>Minimum 5+ years industrial experience in sectors such as Oil & Gas, Construction, Mining, Power Generation, or Heavy Industry Strong experience in rigging and lifting operations Good communication and training skills for classroom and practical sessions Proficiency in Microsoft Office and training documentation<br>Preferred<br>Associate or Bachelor’s Degree in Industrial / Technical or related field Training or teaching experience Certifications such as LEEA, OPITO, NCCCO, or IADC in Rigging / Lifting Operations Instructor / Assessor accreditation in Rigging or Lifting Programs

<strong>Job Description Summary<br><br></strong>Assisting with complex rig moves, preparing, and executing lift plans, and providing on-site supervision for the crane operator team to ensure safe, efficient, and compliant heavy-lift operations.<br><br><strong>Job Description<br><br></strong><strong>Essential Responsibilities:<br><br></strong><ul><li>Lead and supervise the crane operator team during all lifting activities, ensure clear communication and adherence to safe load control.</li><li>Perform designed lifting plans to ensure both rigging gear and loads are protected, perform correct hand signaling and maintain constant communication.</li><li>Identify load weights and calculate required sling sizes, sling angle stresses, and center of gravity (COG). Utilize bridge and crane load charts and unit conversion charts (Metric/Imperial) for all lift arrangements.</li><li>Conduct detailed pre-lift inspections of all rigging equipment to ensure zero defects and compliance with OEM guidelines; inspect, assemble, and dismantle rigging setups.</li><li>Ensure all operations strictly follow GE Vernova standards, report hazards immediately, and maintain accurate documentation of all activities.</li><li>Act as a team player, providing leadership on the shop floor to maintain a culture of safety.<br><br></li></ul><strong>Qualifications/Requirements<br><br></strong><ul><li> High school diploma or higher.</li><li> Ability to read/write instructions in English, and effectively present information to the rigger team.<br><br></li></ul><strong>Desired Characteristics<br><br></strong><ul><li>Minimum of 3 years of experience as a Rigger 1 in an industrial setting.</li><li>Valid Rigger Level 1 certification.</li><li>Proficient in determining necessary tools/equipment, applying logic/reasoning to solve rigging challenges, and interpreting load charts.<br><br></li></ul><strong><strong><strong>Additional Information<br><br></strong></strong></strong><strong>Relocation Assistance Provided: </strong>No

Supervise and coordinate daily painting activities on site. Assign tasks to painters and ensure proper manpower utilization. Ensure surface preparation, painting, and finishing are carried out according to specifications. Inspect completed work to ensure quality, uniformity, and compliance with standards. Ensure proper use, storage, and handling of paints, tools, and equipment. Monitor material usage and report shortages or wastage. Enforce safety regulations and ensure painters use proper PPE. Coordinate with engineers, project managers, and other trades on site. Read and interpret drawings, specifications, and work schedules. Prepare daily progress reports and submit to management. Identify and resolve work-related issues and technical challenges. Train and guide painters to improve productivity and workmanship.

At Air Products, we reimagine what’s possible. By tapping into the motivation of our people and our collective experience, we create the ideas and innovations that drive us forward. When we come together – where every voice is heard and everyone knows they belong and matter – we create solutions that launch people into space, support lifesaving care in hospitals, and enable the construction of groundbreaking, world scale production facilities.<br><br>Reimagine What’s Possible <br><br>The HYCO DCS Operator, reporting to the HYCO Lead/Shift Supervisor, is accountable for the day-to-day DCS Operation & Field Operation of HYCO facility, ensuring the production requirements set by the customer are achieved. HYCO DCS Operator is responsible for the safe, efficient and stable operation of the entire Hydrogen Manufacturing Unit from a centralized control room using DCS. This includes monitoring, controlling and optimizing to meet production targets, quality specifications and environmental regulations. This includes actively supporting plant performance, process optimization and production stability while maintaining strong focus on safety & compliance. The HYCO DCS Operator will execute daily tasks which include preparing and implementing safety work permits, LOTO, completing operations preventative maintenance activities, and assist the maintenance and engineering teams in preparing and executing corrective maintenance activities<br><br>Principal Accountabilities<br><br>Safety, Health & Environment<br><br>Maintain a safe & stable environment. Demonstrate leadership with all Company & Industry safe work processes to prevent all injuries. Ensure proper documentation is maintained for safety related activities. Enforce and adhere to all Safe Work Permits and Lock-out Tag-out and management of change procedures. Be the first line of response for process emergencies. Execute emergency operating procedures, initiate plant trips if necessary and direct field operators. Monitor status of Safety Instrumented System (SIS) and Fire & Gas Systems. Understand the cause & effect chart for all safety interlocks. Ensure all plant emissions (from reformer stack, vent streams) comply with environmental permits. Properly manage waste streams. Ensure the safety of all operations personnel by utilizing the BHIG Basic Safety Practice program<br><br>Technical & Operations<br><br>Operate the Steam Methane Reformer based hydrogen plant with CO2 Removal section & CO2 compression, PSA with Tail Gas compression, Membrane Unit and related utilities as prescribed by the Work Instruction Procedures Operate the pipeline network to supply Hydrogen, steam and CO2 to customers’ pipelines safely and efficiently. Report production progress and plant status to the Shift Supervisor and suggest solutions for any shortfalls. Manage plant production efficiently based on input provided by Plant Management to ensure safety and reliability targets are met to achieve maximum profitability. Ensure BHIG standards, and global best practices for EH&S, productivity, reliability, quality, and overall customer services are met. Meet the customer’s requirements regarding safety, reliability, product quality, and flexibility regarding product supply. Maintain customer communications and relationships at the ‘board’ level, ensuring customer demand rates are satisfied while maximizing the efficiency and profitability of the facility. Follow the Site Work Instruction Manuals for production & supply of Product H2, CO2 & Steam along with other operating and maintenance procedures and checklists to meet the customer’s satisfaction with safety, reliability, product quality, and flexibility of product supply while compliance with requirements. Maintain a relationship with the customer’s counterparts from other Refinery Units where from BHIG either receiving Feedstock, Utilities & Power or supplying Hydrogen and Steam to different Refinery Units on a regular basis through Refinery Shift Superintendent to ensure alignment of expectations for BHIG and the customers current and future product demand. Constantly monitor all process variables (flows, temperatures, pressures, levels, analytical values) via DCS to ensure they are within defined operating limits. Manipulate control loops, setpoints and cascades to maintain sable operations of all integrated units. Use historical data and trends to predict equipment performance degradation, identify inefficiencies and prevent potential trips and failures. Execute & supervise the detailed start up sequence for the entire plant or individual units/loops form a cold condition, warm condition or hot stand by condition, ensuring a smooth & safe transition to full load normal operations. Assist in the commissioning activities of the facility Maintain constant communication with field operators, providing instructions for equipment adjustments, isolations and rounds. Liaise with the maintenance team to co-ordinate equipment preparation for maintenance (isolation, purging & blinding) and safe taking equipment back in line. Conduct detailed and accurate shift handovers with incoming operators, highlighting any abnormalities, ongoing work and special instruction. Follow shift turnover protocols to ensure a safe and efficient handover to the following shift. Maintain accurate and timely logs of operating parameters, significant events and production data. Fully accountable to ensure his logs and that his operator’s logs are accurate and compliant with published matrix. Identify the root cause of process deviations and equipment malfunction. Work with engineers to implement long-term solutions. Suggest and participate in operational improvements and de-bottlenecking projects to enhance safety, reliability and profitability. Ensure compliance with all CM, PM tasks & Environmental Regulatory requirements. Support and prepare for Shutdown Planning and Turnaround Planning. Provide coaching and motivation with the field operations team to achieve operational excellence and customer satisfaction. Establish & maintain close working relationships with engineering and maintenance personnel to continuously monitor & evaluate plant systems & equipment performance. Ensure compliance with process safety, MOC’s, and OPHR requirements. Provide operations support and participate in investigations and Root Cause Analysis to identify & implement sustainable corrective actions. Facilitate attainment of operational excellence and customer satisfaction via operations productivity, reliability, quality, and continuous improvement initiatives. Communication of plant activities with other shifts to maintain continuity between shifts for a safe and reliable operation. Execute other duties as assigned by reporting managers in a timely and efficient manner.<br><br>Minimum Requirements And Qualifications<br><br>Bachelor’s degree in chemical, Mechanical, or Chemical Process Operations with 10 years’ experience preferred. An Associate Technical Degree (2-year certificate) will be considered based on years of experience and competence. Experience in DCS Operation & Field Operation, with minimum of 5 years’ Lead DCS Operations Experience in SMR based Hydrogen or Ammonia or Methanol or Syngas plant as DCS Operator. Proficiency with DCS platforms (e.g. Yokogawa Centum VP, Siemens PCS 7) Deep understanding of Chemical Engineering Principles, thermodynamics and process control. Wide technical knowledge in operations, engineering, and maintenance activities Ability to maintain high level of awareness and make sound decisions under pressure. Strong problem solving and diagnostic abilities. Clear, concise and effective verbal and written communication. Proficiency in English speaking and writing. Ability to communicate with the customer at the board level daily. Able to communicate between operations and maintenance teams. Deep understanding of Chemical Engineering Principles, thermodynamics and process control A strong commitment to employee involvement, team building and diversity.<br><br>Founded in 1940, Air Products is a world-leading industrial gases company and has a proud history of innovation, operational excellence, with an unwavering commitment to safety and environmental stewardship. Working together, we are taking our passion and diverse backgrounds forward to reimagine what’s possible and generate a cleaner future for our customers, our communities, and the world.

AlRashed Industrial Company Are Looking for Safety inspectors. The HSE Inspector will be responsible for executing field-level Health, Safety, and Environment assurance across assigned factory areas, conducting inspections, identifying hazards, reporting unsafe conditions, verifying Permit to Work readiness, supporting Hazard Identification and Job Hazard Analysis preparation, monitoring corrective actions, maintaining HSE records, and ensuring safety requirements are implemented during daily operations.<br>Job Responsibility:Conduct inspections in various work areas to ensure compliance with company HSE procedures and approved inspection schedules. Identify, document, and report HSE observations, violations, unsafe acts, conditions, and deviations. Support Hazard Identification and Risk Assessment activities by coordinating with relevant departments. Assist with Job Hazard Analysis activities by identifying hazards, defining risk levels, and submitting records within the required timeline. Verify site readiness for Permit to Work activities, monitor work execution, and ensure safety requirements are followed. Support accident, incident, near-miss, injury, and illness reporting, and follow up on corrective actions. Maintain Corrective Action Register and other HSE records in approved digital systems. Conduct toolbox talks, safety awareness sessions, and training as assigned. Monitor firefighting equipment, emergency systems, waste handling, and environmental practices for compliance.<br>Candidate Requirements:Minimum qualification of a Safety Diploma or related occupational safety certification. Practitioner certification in occupational safety and health is preferred. Strong English communication skills. Proficiency in Microsoft Office tools and digital reporting systems. Excellent time management and attention to detail. Ability to handle a heavy workload and manage multiple responsibilities simultaneously. Entry-level experience accepted with strong field discipline and reporting ability.<br>Skills Description Proficient in written and spoken English Preparation of clear inspection reports, HSE observations, violation records, HIRA/JHA documentation, incident notes, and professional follow-up emails Knowledge of Microsoft Office tools such as Excel, Word, Outlook, Teams, One Drive, and Microsoft Lists Strong time management, follow-up discipline, and prioritization skills Ability to handle heavy workloads with accuracy and professionalism Attention to detail and accountability Ability to work under pressure and coordinate with different stakeholders Field discipline for routine inspections, PTW monitoring, firefighting/fire alarm checks, HSE observations, violation tickets, incident support, training records, corrective action follow-up, waste management monitoring, and evidence-based reporting.<br>We're looking forward to welcoming new talent to our Al-Rashed Industrial team!

<h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">About the Role</h3> <p style="margin:0 0 12px; ************;">Saudi Aramco is seeking an <strong style="font-weight:700;">Instrument Engineer</strong> to join the Hawiyah Gas Plant Engineering Division, part of Southern Area Gas Operations. This full-time position is based near Al-Ahsa in the Eastern Region of Saudi Arabia and requires a minimum of 15 years of relevant experience.</p> <h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">Role Context and Scope</h3> <p style="margin:0 0 12px; ************;">The Hawiyah Gas Plant is a large gas processing facility handling multiple streams, situated approximately 70 KM from Al-Ahsa. The primary responsibilities for this role include developing engineering design packages, participating in plant trip troubleshooting and investigations, and reviewing project documentation.</p> <h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">Key Responsibilities</h3> <ul style="margin:0 0 12px; padding-inline-start:24px; list-style-type:disc; list-style-position:outside;"> <li style="margin:0 0 6px;">Lead and execute complex instrumentation and control engineering tasks for oil &amp; gas processing facilities, including FEED, detailed design, commissioning, maintenance support, and brownfield/greenfield projects.</li> <li style="margin:0 0 6px;">Lead design and engineering activities for field instrumentation in oil &amp; gas process units.</li> <li style="margin:0 0 6px;">Perform instrument selection, sizing, configuration, and preparation of datasheets for transmitters, process analyzers, control valves, emergency shutdown valves, and machinery instrumentation (*, vibration monitoring, compressor control, Fire &amp; Gas system).</li> <li style="margin:0 0 6px;">Develop and review Piping and Instrumentation Diagrams (P&amp;IDs, I/O lists), instrument index, hook-up drawings, loop diagrams, installation details, and material requisitions, ensuring compliance with hazardous area classifications and selection of appropriate Ex-rated instruments.</li> <li style="margin:0 0 6px;">Conduct vendor technical bid evaluations, Factory Acceptance Test (FAT)/Site Acceptance Test (SAT) inspections, and interface with Original Equipment Manufacturers (OEMs).</li> <li style="margin:0 0 6px;">Support commissioning, calibration, troubleshooting, and maintenance activities, including root-cause analysis for recurring instrumentation issues.</li> <li style="margin:0 0 6px;">Configure, troubleshoot, and maintain DCS, PLC, ESD, and F&amp;G systems using major platforms (*, Yokogawa CENTUM/ProSafe-RS), Compressor Control Systems (*, CCC), and Vibration Monitoring Systems.</li> <li style="margin:0 0 6px;">Develop and review control system architectures, network topologies, logic diagrams, cause &amp; effect charts, and control narratives.</li> <li style="margin:0 0 6px;">Perform control loop tuning, advanced control strategy review, and alarm management tasks (ISA * / EEMUA 191).</li> <li style="margin:0 0 6px;">Support system integration and communication protocols (Modbus, Profibus, Foundation Fieldbus, OPC UA, HART, Ethernet/IP).</li> <li style="margin:0 0 6px;">Lead and participate in Factory Acceptance Test (FAT) and Site Acceptance Test (SAT), loop checks, logic testing, and commissioning of control systems.</li> <li style="margin:0 0 6px;">Provide technical guidance on cybersecurity requirements for control systems (ISA/IEC 62443).</li> </ul> <h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">Minimum Qualifications and Experience</h3> <ul style="margin:0 0 12px; padding-inline-start:24px; list-style-type:disc; list-style-position:outside;"> <li style="margin:0 0 6px;">Bachelor’s degree in Instrumentation Engineering, Control Engineering, or an equivalent field.</li> <li style="margin:0 0 6px;">Minimum of <strong style="font-weight:700;">15 years’ experience</strong> in oil &amp; gas, with refinery &amp; petrochemicals experience also considered, covering plant design, commissioning, and maintenance.</li> <li style="margin:0 0 6px;">Proven track record in both greenfield and brownfield project execution.</li> <li style="margin:0 0 6px;">Strong experience interacting with operations, maintenance, and Engineering, Procurement, and Construction (EPC) contractors.</li> <li style="margin:0 0 6px;">Hands-on and in-depth knowledge of international standards and codes (Instrumentation National Code (ENC) and NEMA) and instrumentation/control systems such as process measurements, relief/control/ESD valves, analyzers, equipment protection systems (vibration/temperature), fire systems, and PLCs.</li> </ul> <h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">Required Skills and Certifications</h3> <ul style="margin:0 0 12px; padding-inline-start:24px; list-style-type:disc; list-style-position:outside;"> <li style="margin:0 0 6px;">Deep technical expertise in field instrumentation, control systems, and international standards to ensure safe, reliable, and optimized plant operation.</li> <li style="margin:0 0 6px;">Excellent technical writing skills for specifications, reports, and technical studies.</li> <li style="margin:0 0 6px;">Strong analytical problem-solving skills and the ability to make high-level technical decisions.</li> <li style="margin:0 0 6px;">Leadership capability to guide teams and mentor junior engineers.</li> <li style="margin:0 0 6px;">Effective communication skills.</li> <li style="margin:0 0 6px;">Ability to work across operations, maintenance, and vendor interfaces.</li> <li style="margin:0 0 6px;">Ability to manage multiple projects, meet deadlines, and deliver under pressure.</li> <li style="margin:0 0 6px;">Professional Certifications (<strong style="font-weight:700;">Preferred</strong>): TÜV Functional Safety Engineer/Expert (IEC 61508/61511), ISA CAP (Certified Automation Professional), OEM system certifications (Yokogawa CENTUM/ProSafe-RS), and Safety certifications.</li> </ul> <h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">Work Environment</h3> <p style="margin:0 0 12px; ************;">This full-time position is located within Saudi Arabia, with the specific work location and schedule to be detailed in the job offer. Saudi Aramco offers challenging professional, technical, and industrial opportunities on world-scale projects, supported by significant investment in capital and technology. The company is committed to talent development through extensive workforce programs.</p>

<p><strong>About AMANA:</strong></p><p>Group AMANA is in constant forward motion. Over decades of growth, we have adopted intelligent solutions that improve the way we build, making AMANA a regional leader in the industry today.</p><p><br></p><p>We have gone beyond conventional construction by championing intelligent solutions that improve the way we build. We are the region’s trusted design-build company, specializing in industrial construction for over three decades. Our reputation is built on our ability to provide turnkey solutions for fast-track projects repeatedly.</p><p><br></p><p>We are a human-centric organization promoting learning and development opportunities for all employees to thrive in dynamic markets. By investing in our people’s continued growth and learning, we challenge and change how we build together – people and business.</p><p><br></p><p>We are an equal opportunity employer and welcome applications from all qualified candidates. We are committed to fostering an inclusive environment and encourage talented individuals from all backgrounds to apply.</p><p><br></p><p><strong>Job Summary:</strong></p><p>We are seeking a motivated and detail-oriented Jr. Planning Engineer to join our team in Saudi Arabia. The successful candidate will support the planning, scheduling, monitoring, and reporting of design and build projects across the industrial, commercial, and data center sectors.</p><p><br></p><p>The role requires strong technical planning capabilities, hands-on experience with Primavera P6, and a solid understanding of project controls, construction sequencing, contractual requirements, and delay analysis. The Planning Engineer will work closely with project management, engineering, procurement, construction, cost control, quantity surveying, subcontractors, and suppliers to ensure effective project delivery.</p><p><br></p><p><strong>Key Responsibilities:</strong></p><ul><li>Review contract and tender documents to understand scheduling requirements, key milestones, reporting obligations, and contractual notices.</li><li>Prepare and maintain tender, baseline, look-ahead, micro, and recovery schedules using Primavera P6.</li><li>Ensure project schedules are accurate, logically sequenced, resource loaded and aligned with the approved construction methodology and project requirements.</li><li>Monitor actual progress through site visits, daily construction reports, timesheets, completed quantities, and regular coordination with site teams.</li><li>Update schedules to reflect actual progress, revisions, variations, acceleration measures, delays, and recovery plans.</li><li>Prepare weekly and monthly progress reports, resource histograms, cash in and cash out curves, and schedule presentations for clients and internal stakeholders.</li><li>Monitor productivity, planned versus actual performance, critical activities, and project milestones, highlighting any schedule variances or areas of concern.</li><li>Identify potential delays and project risks, communicate their impact to the Project Manager, and recommend appropriate mitigation and recovery strategies.</li><li>Conduct delay analysis and support the Contracts team in preparing Extension of Time claims, including impacted schedules, narratives, methodologies, and supporting documents.</li><li>Coordinate with Engineering, Procurement, Construction, Cost Control, Quantity Surveying, and Contracts teams to ensure effective project planning and time management.</li><li>Coordinate with subcontractors and suppliers to obtain progress updates and ensure their activities remain aligned with the overall project schedule.</li><li>Participate in site progress and coordination meetings, follow up on planning actions, and provide clear schedule updates to relevant stakeholders.</li><li>Maintain accurate planning records, reports, productivity data, and schedule updates within the approved project filing system.</li></ul><p><br></p><p><strong>Qualifications and Skills:</strong></p><ul><li>Bachelor’s degree in civil, Mechanical, or Electrical Engineering (BSc is mandatory)</li><li>Minimum 1 year of relevant experience in project planning, preferably with contractors in data center or industrial projects</li><li>Proven expertise in Primavera P6 and Power BI</li><li>Possession of one or more of the following certifications is mandatory:</li><li>PMP (Project Management Professional)</li><li>PMI-SP (Scheduling Professional)</li><li>PSP (Planning &amp; Scheduling Professional)</li><li>Strong understanding of contractual and commercial implications related to project scheduling</li><li>Excellent communication and presentation skills with the ability to interact confidently with clients and consultants</li><li>Proven ability to manage multiple priorities and meet tight deadlines</li><li>Candidate must be a Saudi Talent.</li></ul><p><br></p><p><strong>What makes a true AMANAian?</strong></p><ul><li>We know that our company growth and success come from our people who continuously drive our company, partners, and clients forward. Our community of talented employees, AMANAians, are built on the eight foundations of the Group Amana workforce.</li><li>We are Team Players.</li><li>We are Reliable.</li><li>We communicate with Clarity.</li><li>We make decisions based on Understanding.</li><li>We are Accountable.</li><li>We foster Integrity.</li><li>We are human Driven.</li><li>We are Adaptable and Agile.</li></ul>

The ideal candidate will own the entire production process. They will strategize with other internal teams to ensure operational excellence. The will also run quality assessment to ensure customer satisfaction.<br>Responsibilities Manage and evaluate entire production process Contribute to production planning and budgeting Lead and monitor quality assessments to ensure customer satisfaction Maintain a safe production environment Coordinate with key internal and external production stakeholders Communicate with department managers to define business strategy and required goals. Estimating costs and preparing budgets for the production process. Organizing workflow to meet required specifications and supervising setting deadlines for delivery. Production control and problem solving in the production process. Supervising the performance of production staff and all workers in the production department. Determine the necessary resources such as the volume of labor, raw materials and all requirements of the production process. Supervising the maintenance work and purchasing the equipment required to operate the department. Monitoring and ensuring the production of products that meet quality standards. Supervising the implementation of occupational health and safety precautions. Preparing periodic reports and submitting them to senior management.<br><br>Qualifications<br>Education: Bachelor of Mechanical Engineering. Specialized knowledge: Deep knowledge of production management Skills: Excellent organizational and leaderships skills. MS-Office proficiency Abilities: Teamwork, taking new assignments etc. Other characteristics such as personal characteristics: Discipline, Punctuality, Hardworking, committed to work etc. Professional Certification: Experience: 5-8 Years