وظائف مهندس طرق - الجبيل السعودية

<h3 >About the Role</h3> <p >ENGIE Saudi Arabia is seeking a <strong >Mechanical Engineer</strong> for a full-time position in Al Jubail. This role involves supervising a team of maintenance technicians and support staff to manage daily mechanical maintenance activities at a power and desalination plant. The Mechanical Engineer will also support major plant outages, focusing on gas turbine long-term service agreements to ensure the plant meets safety, environmental, availability, reliability, efficiency, and budgetary targets. The position requires 2-5 years of relevant experience.</p> <h3 >Key Responsibilities</h3> <ul > <li >Ensure compliance with IMS and maintain a safe working environment for all personnel and contractors.</li> <li >Obtain Permits to Work and ensure adherence to Method Statements, Work Instructions, and Procedures.</li> <li >Supervise Mechanical Technicians and Contractors to ensure safety rules and HSE procedures are followed, reporting any unsafe conditions.</li> <li >Oversee the completion of maintenance tasks as per Work Orders in the CMMS and document all work performed.</li> <li >Plan and ensure maintenance of mechanical equipment aligns with OEM manuals and best practices, coordinating with the Lead Engineer for scheduling.</li> <li >Support 24-hour plant operations, including being available for call-out at short notice to minimize equipment downtime.</li> <li >Perform troubleshooting, rectify defects, and conduct Root Cause Analysis of failures, reporting findings to the Lead Engineer.</li> <li >Collaborate with Plant Operations Personnel to resolve mechanical equipment issues.</li> <li >Assist the Lead Engineer with outage planning, execution, and budget preparation processes.</li> <li >Manage inventory of spares and consumables, place requisitions, and ensure tools and equipment are available, certified, and well-maintained.</li> <li >Provide technical advice to colleagues and contractors, review and update task lists, and implement initiatives to improve CMMS scheduling and documentation.</li> <li >Coach Mechanical Technicians on equipment, safe work procedures, and operational techniques, and deliver technical training modules.</li> </ul> <h3 >Decision-Making Authority and Accountability</h3> <p >The jobholder operates under the general guidance of the Lead Engineer for routine plant operations and team management. The role allows for planning and managing activities within established policy and procedural boundaries. Extraordinary issues outside these policies are referred to the Engineering Manager/Lead Engineer for discussion and approval.</p> <p >Accountability for outcomes includes:</p> <ul > <li >Continuous application of safety rules and HSE procedures, including frequency of safety incidents, near misses, and Lost Time Injury Frequency Rate (LTIFR).</li> <li >Ensuring no HSE compliance breaches.</li> <li >Efficiency and quality of work, including closed-out Work Orders and troubleshooting effectiveness.</li> <li >Quality of reports, Root Cause Analysis (RCA), and follow-up actions.</li> <li >Accuracy of outage planning and forecast budget.</li> <li >Minimizing downtime due to unavailability of spares and consumables.</li> <li >Condition and quantity of available tools and equipment.</li> <li >Quality and accuracy of documentation.</li> <li >Skill development of technicians and quality of their work, reflected in staff feedback.</li> </ul>

<h3 >About Abdullah A. Al-Barrak &amp; Son Co.</h3> <p >Abdullah A. Al-Barrak &amp; Son Co. is seeking a <strong >Design Engineer</strong> to join their team in Al Jubayl, Saudi Arabia. This full-time position offers an opportunity to contribute to significant engineering projects within a specialized industry context.</p> <h3 >The Design Engineer Role</h3> <p >The Design Engineer will be responsible for the comprehensive design and engineering of critical industrial equipment. This role involves ensuring strict compliance with international standards and specific client requirements, contributing to the successful delivery of engineering solutions.</p> <h3 >Key Responsibilities</h3> <ul > <li >Design and engineer pressure vessels, storage tanks, and heat exchangers in accordance with ASME, API, and TEMA standards.</li> <li >Ensure compliance with Saudi Aramco requirements and client-specific certifications.</li> <li >Perform mechanical calculations using industry-standard tools such as PV Elite, COMPRESS, or similar software.</li> <li >Manage and review design deliverables provided by outsourced engineering teams.</li> <li >Support bid evaluations, scope reviews, and client clarifications throughout project lifecycles.</li> <li >Coordinate with Quality Assurance/Quality Control (QA/QC) for inspection and material compliance.</li> <li >Prepare detailed nozzle loadings, supports, weld designs, and assembly drawings.</li> <li >Provide fabrication support and resolve shop floor queries during the manufacturing process.</li> <li >Integrate all design documents into complete project engineering deliverables.</li> </ul> <h3 >Qualifications and Education</h3> <ul > <li >Bachelor's degree in Mechanical Engineering or an equivalent qualification from a recognized university.</li> </ul> <h3 >Required Experience and Technical Skills</h3> <ul > <li >Minimum of <strong >5 to 10 years</strong> of relevant experience in the design of pressure vessels, storage tanks, and/or heat exchangers.</li> <li >Experience must be gained within an EPC (Engineering, Procurement, and Construction), fabrication, or oil &amp; gas engineering environment.</li> <li >Prior experience on Saudi Aramco or similar major oil &amp; gas client projects is strongly preferred.</li> <li >Proficiency in mechanical calculation software such as PV Elite, COMPRESS, or equivalent tools.</li> <li >Experience in reviewing or managing outsourced or subcontracted design engineering deliverables is an advantage.</li> </ul> <h3 >Work Environment</h3> <p >This is a full-time position based in Al Jubayl, Saudi Arabia. The role requires a dedicated professional capable of working effectively within a project-driven engineering environment.</p>

<h3 >About the Role</h3> <p >ENGIE Middle East is seeking a dedicated Shift Engineer to join our team in Al Jubail. This full-time role requires 5-10 years of experience and involves leading the operations shift team to ensure safe and efficient plant operations. The Shift Engineer will be responsible for making accurate and timely decisions regarding plant processes and performance, consulting with the Operations Manager as needed. The position demands a detailed understanding and practical experience with technologies used in modern process plants for power generation and desalinated water production.</p> <h3 >Operational Responsibilities</h3> <ul > <li >Provide focused leadership to the shift team to achieve plant performance targets and ensure optimum levels of power and water export as required by the off-taker.</li> <li >Coordinate effectively among the operations and maintenance teams for routine, preventive, and predictive maintenance requirements.</li> <li >Ensure operations shifts are adequately staffed and that necessary resources are available for the team to operate the Cogen plant safely, reliably, and efficiently.</li> <li >Monitor the quality and actions taken on defects and work orders.</li> <li >Continuously monitor and analyze equipment operating parameters to predict abnormal conditions early and initiate appropriate action to prevent unscheduled unit or equipment outages.</li> <li >Oversee chemical processes, sampling, and water plant control to maintain quality standards, environmental compliance, and safety.</li> <li >Raise work orders in the system to report plant defects and follow up on their progress.</li> <li >Coordinate with the Senior Shift Engineer and maintenance team to schedule planned and unplanned maintenance activities.</li> <li >Prepare and issue safety documentation to ensure safe isolations from the system for planned and unplanned maintenance activities.</li> <li >Coordinate and maintain strong liaison with Power, Gas, Sea Water &amp; Water Control Centers regarding Availability Declarations and Requirements Planning.</li> </ul> <h3 >Safety, Quality, and Environmental Compliance</h3> <ul > <li >Responsible for the Safety Management and Environment Management System where applicable.</li> <li >Ensure IMS Compliance and Certification.</li> <li >Implement and adhere to all operations-related policies and procedures.</li> <li >Prepare safety documents according to JOMEL safety rules standard and be conversant with the Permit to Work (PTW) system.</li> <li >Ensure all activities are carried out according to predefined Standard Operating Procedures (SOPs) and instructions.</li> <li >Ensure the shift team is aware of and trained on any revisions or updates to SOPs or instructions.</li> </ul> <h3 >Team Leadership and Development</h3> <ul > <li >Maintain high standards of management, ethics, and leadership within the team.</li> <li >Establish and facilitate training programs for individual development and operational competence.</li> <li >Lead the implementation of the performance management process by setting objectives and targets for individuals and conducting periodical reviews.</li> <li >Provide support to individuals in achieving set targets whenever necessary.</li> <li >Implement lessons learned processes and other activities to foster a learning organization culture.</li> <li >Ensure succession planning for key staff members.</li> <li >Establish and implement vertical and horizontal communication within the shift team to ensure members are well-informed and engaged with the business.</li> <li >Act as a subject matter expert in specialized areas of the plant and deliver training to staff when required.</li> </ul> <h3 >Qualifications and Experience</h3> <p >Candidates for the Shift Engineer position should possess 5-10 years of relevant experience. The role requires a detailed understanding and practical experience of technologies involved in operating modern process plants associated with power generation and the production of desalinated water. Essential skills include <strong >excellent communication and leadership abilities</strong>, along with the capacity to work under one's own initiative with a high level of drive, energy, and motivation.</p> <h3 >Reporting Structure and Accountabilities</h3> <p >The Shift Engineer operates under the general guidance of the Senior Shift Engineer and is empowered to plan and manage their areas of activity within predefined limits. Extraordinary issues outside established policy and procedure are to be referred to the Senior Shift Engineer for approval or further action plans. Key accountabilities for this role include:</p> <ul > <li >Ensuring smooth running of Shift Operations.</li> <li >Compliance with HSE (Audit &amp; Procedural Compliance).</li> <li >Adherence to ISO Standards (Audit &amp; Procedural Compliance).</li> <li >Achieving Plant Operations Targets.</li> <li >Maintaining the Quality of Reports and the Reporting System for all operations-related reports.</li> </ul>

<div dir="rtl"><h3 >نبذة عن الدور</h3> <p >تبحث شركة الخليج واسيا للمقاولات عن <strong >مهندس كهربائي</strong> للانضمام إلى فريقها في الجبيل بالمنطقة الشرقية. هذا الدور بدوام كامل ومناسب للمرشحين ذوي الخبرة من 0 إلى سنة واحدة، حيث سيتولى المهندس مسؤولية تصميم وتنفيذ وصيانة الأنظمة الكهربائية للمشاريع المختلفة.</p> <h3 >المهام والمسؤوليات الرئيسية</h3> <ul > <li >إعداد التصاميم والمخططات الكهربائية لمشاريع وأعمال الهندسة الكهربائية، ومتابعة مراحل التنفيذ.</li> <li >إعداد مخططات ومواصفات خطوط شبكات النقل والتوزيع الكهربائية وتحديد مساراتها بدقة.</li> <li >إعداد برامج تشغيل الأنظمة والمعدات الكهربائية بما يتوافق مع متطلبات العمل.</li> <li >تشخيص الأعطال في الأنظمة والمعدات الكهربائية ومتابعة إجراءات الإصلاح والصيانة اللازمة.</li> <li >إعداد برامج الصيانة الوقائية للأجهزة والمعدات والشبكات الكهربائية بناءً على توصيات الشركات المصنعة والتعليمات المعتمدة.</li> <li >تطوير أساليب وإجراءات العمل ومواكبة التطورات التقنية في مجال الهندسة الكهربائية.</li> <li >إعداد الوثائق والتقارير المتخصصة بالأعمال والمشروعات الهندسية، وتوضيح نسب تقدمها وعرضها، وحفظها في قاعدة البيانات المخصصة وفقاً للسياسات والإجراءات المعتمدة.</li> </ul> <h3 >المؤهلات والخبرة</h3> <ul > <li >خبرة تتراوح من <strong >0 إلى 1 سنة</strong> في مجال الهندسة الكهربائية.</li> <li >القدرة على إعداد التصاميم والمخططات الكهربائية.</li> <li >معرفة جيدة ببرامج تشغيل الأنظمة والمعدات الكهربائية.</li> <li >القدرة على تشخيص الأعطال ومتابعة إجراءات الصيانة.</li> </ul> <h3 >بيئة العمل</h3> <p >يعمل المهندس الكهربائي ضمن فريق عمل في الجبيل، المنطقة الشرقية، في بيئة عمل ديناميكية تتطلب الالتزام بالمعايير الهندسية والجودة. الوظيفة بدوام كامل.</p> <h3 >معلومات إضافية</h3> <ul > <li >الراتب: لم يتم الإفصاح عنه.</li> </ul> <h3 >التقديم</h3> <p >للمهتمين بالانضمام إلى شركة الخليج واسيا للمقاولات، يرجى تقديم طلباتكم عبر القنوات المتاحة.</p></div>

<div dir="rtl"><h3 >نبذة عن الدور</h3> <p >تبحث شركة ناصر سعيد الهاجري وشركاه للمقاولات عن <strong >مهندس كهربائي</strong> للانضمام إلى فريقها في الجبيل، المنطقة الشرقية. يركز هذا الدور بدوام كامل على إعداد التصاميم والمخططات الكهربائية، ومتابعة التنفيذ، وتشخيص الأعطال، وإعداد برامج الصيانة للأنظمة والمعدات الكهربائية.</p> <h3 >نظرة عامة على المسؤوليات</h3> <p >يتولى المهندس الكهربائي مسؤولية شاملة تشمل التصميم، والتنفيذ، والصيانة، والتحليل في مشاريع الهندسة الكهربائية. يشمل ذلك إعداد الوثائق والتقارير المتخصصة، ومتابعة إجراءات الإصلاح، وتطوير أساليب العمل لضمان الكفاءة والجودة.</p> <h3 >المهام الرئيسية</h3> <ul > <li >إعداد التصاميم والمخططات الكهربائية لمشاريع وأعمال الهندسة الكهربائية، ومتابعة التنفيذ.</li> <li >إعداد مخططات ومواصفات خطوط شبكات النقل والتوزيع الكهربائية وتحديد مساراتها.</li> <li >إعداد برامج تشغيل الأنظمة والمعدات الكهربائية بما يتوافق مع متطلبات العمل.</li> <li >تشخيص أعطال الأجهزة والمعدات الكهربائية ومتابعة إجراءات الإصلاح والصيانة.</li> <li >إعداد برامج الصيانة الوقائية للأجهزة والمعدات والشبكات الكهربائية بناءً على توصيات الشركة المصنعة والتعليمات.</li> <li >تطوير أساليب وإجراءات العمل ومواكبة التطورات التقنية في المجال.</li> <li >إعداد الوثائق والتقارير المتخصصة بالأعمال والمشروعات الهندسية، وتوضيح نسب تقدمها، وحفظها في قاعدة البيانات المعتمدة.</li> </ul> <h3 >المؤهلات والخبرة</h3> <ul > <li >خبرة تتراوح بين 0-1 سنة في مجال الهندسة الكهربائية.</li> <li >القدرة على إعداد التصاميم والمخططات الكهربائية.</li> <li >مهارات في تشخيص الأعطال ومتابعة إجراءات الإصلاح.</li> </ul> <h3 >بيئة العمل</h3> <p >هذه الوظيفة بدوام كامل ومقرها في الجبيل، المنطقة الشرقية. سيعمل المهندس الكهربائي ضمن فريق متخصص في مشاريع المقاولات، مما يتطلب القدرة على العمل التعاوني والالتزام بالجداول الزمنية للمشاريع.</p> <h3 >معلومات إضافية</h3> <p >الراتب لهذه الوظيفة غير معلن وسيتم تحديده بناءً على المؤهلات والخبرة خلال عملية التوظيف.</p></div>

<div dir="rtl"><h3 >نبذة عن الوظيفة</h3> <p >تبحث مؤسسة السعاده للمقاولات العامة عن <strong >مهندس مدني</strong> للانضمام إلى فريقها في الجبيل، المنطقة الشرقية. يركز هذا الدور بدوام كامل على دراسة المواقع الإنشائية، وإعداد التصاميم والمخططات، والإشراف على التنفيذ لضمان مطابقة المواصفات. يتطلب الدور خبرة تتراوح بين 0-1 سنة، مما يجعله فرصة مثالية للمهندسين حديثي التخرج أو ذوي الخبرة المحدودة.</p> <h3 >المهام والمسؤوليات الرئيسية</h3> <ul > <li >دراسة طبوغرافية وجيولوجية الموقع الإنشائي ونتائج اختبار فحص التربة.</li> <li >دراسة المتطلبات والمخططات المعمارية للمشروع لتحديد أعماق التأسيس اللازمة.</li> <li >إجراء تحليل إنشائي متكامل لعناصر المشروع المختلفة.</li> <li >إعداد التصاميم الإنشائية ومتابعة إعداد المخططات الإنشائية وتدقيقها.</li> <li >متابعة وتدقيق جداول الكميات والمواصفات للمواد الإنشائية.</li> <li >الإشراف على تنفيذ المشروع في الموقع ومطابقة جميع الأعمال للمواصفات المعتمدة.</li> <li >تطوير أساليب وإجراءات العمل ومواكبة التطورات التقنية في مجال الهندسة المدنية.</li> <li >إعداد الوثائق والتقارير المتخصصة بنتائج الأعمال والمشروعات الهندسية ونسبة تقدمها.</li> <li >عرض وتوضيح التقارير وحفظها في قاعدة البيانات الخاصة بها وفقاً للسياسات والإجراءات المعتمدة.</li> </ul> <h3 >التصميم الهندسي والتحليل</h3> <p >يتولى المهندس المدني مسؤولية أساسية في مراحل التصميم والتحليل للمشاريع. يشمل ذلك تحليل البيانات الجيولوجية والتربة لتحديد أسس التصميم، بالإضافة إلى إجراء تحليلات إنشائية دقيقة لضمان سلامة واستقرار الهياكل. كما يقوم بإعداد وتدقيق المخططات الإنشائية التفصيلية التي توجه عملية التنفيذ.</p> <h3 >الإشراف على التنفيذ وضبط الجودة</h3> <p >يعد الإشراف المباشر على تنفيذ المشاريع جزءاً حيوياً من مهام المهندس المدني. يتضمن ذلك التأكد من أن جميع الأعمال تتم وفقاً للتصاميم والمواصفات الفنية وجداول الكميات المعتمدة. يساهم الدور في ضمان جودة المواد المستخدمة ودقة التنفيذ، مما يضمن تسليم المشاريع بمعايير عالية.</p> <h3 >المؤهلات والخبرات</h3> <ul > <li >خبرة عملية تتراوح بين <strong >0 إلى 1 سنة</strong> في مجال الهندسة المدنية أو ما يتصل بها.</li> <li >معرفة قوية بالرسومات الهندسية والتصاميم الإنشائية.</li> <li >القدرة على إعداد العروض التقديمية، بما في ذلك عروض الإنفوجرافيك.</li> <li >الالتزام بتطوير أساليب العمل ومواكبة أحدث التطورات التقنية في المجال.</li> </ul> <h3 >بيئة العمل</h3> <p >تتطلب هذه الوظيفة العمل بدوام كامل في الجبيل، المنطقة الشرقية. سيعمل المهندس المدني ضمن فريق متخصص، مما يوفر فرصة للنمو المهني والمساهمة في مشاريع إنشائية متنوعة ومهمة لمؤسسة السعاده للمقاولات العامة.</p></div>

<div dir="rtl"><h3 >نبذة عن الدور</h3> <p >تبحث شركة الخليج وآسيا للمقاولات عن <strong >مهندس ميكانيكي</strong> للانضمام إلى فريقها في الجبيل، المنطقة الشرقية. هذا الدور بدوام كامل ومناسب للمرشحين ذوي الخبرة من 0 إلى 1 سنة. يركز الدور على إعداد التصاميم والمخططات للمشاريع الميكانيكية، بالإضافة إلى برامج التجميع والتركيب والتشغيل والصيانة.</p> <h3 >الغرض من الوظيفة</h3> <p >يتولى المهندس الميكانيكي مسؤولية إعداد التصاميم والمخططات الهندسية الميكانيكية، وتطوير برامج تجميع وتركيب وتشغيل التجهيزات والمعدات الصناعية. كما يشمل الدور إعداد برامج الصيانة الوقائية وتوثيق التقارير المتخصصة لضمان سير العمليات بكفاءة وفعالية.</p> <h3 >المهام والمسؤوليات الرئيسية</h3> <ul > <li >إعداد التصاميم والمخططات لمشاريع أعمال الهندسة الميكانيكية، بما في ذلك المولدات، التوربينات، وحدات التكييف، المراجل، وشبكات التوزيع لأنظمة التدفئة والتكييف والتبريد.</li> <li >تطوير خطط وبرامج تجميع وتركيب التجهيزات الميكانيكية للمشاريع الصناعية، وتحديد أنظمة الضبط والتحكم اللازمة.</li> <li >إعداد برامج تشغيل المعدات وبرامج الصيانة الوقائية بناءً على تعليمات الشركات المصنعة، ومتابعة إجراءات تنفيذها.</li> <li >تطوير أساليب وإجراءات العمل ومواكبة التطورات التقنية في مجال الهندسة الميكانيكية.</li> <li >إعداد الوثائق والتقارير المتخصصة بالأعمال والمشروعات الهندسية، وتوضيح نسب تقدمها، وعرضها، وحفظها في قاعدة البيانات المخصصة وفقاً للسياسات والإجراءات المعتمدة.</li> </ul> <h3 >المؤهلات والخبرة</h3> <ul > <li >خبرة تتراوح من 0 إلى 1 سنة في مجال الهندسة الميكانيكية.</li> <li >القدرة على إعداد التصاميم والمخططات الهندسية.</li> <li >معرفة ببرامج تجميع وتركيب وتشغيل المعدات الميكانيكية.</li> <li >القدرة على إعداد برامج الصيانة الوقائية.</li> </ul> <h3 >بيئة العمل</h3> <p >هذا الدور بدوام كامل ويقع في الجبيل، المنطقة الشرقية. يعمل المهندس الميكانيكي ضمن فريق متخصص في مشاريع المقاولات.</p> <h3 >معلومات إضافية</h3> <p >الراتب لهذا الدور غير معلن وسيتم تحديده بناءً على المؤهلات والخبرة خلال عملية التوظيف.</p></div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The Mechanical Engineer (Tagging Engineer) is responsible for preparing duct tagging, CAMduct input,</p><p>detailed shop drawings, and providing technical support related to HVAC ductwork systems in accordance</p><p>with project specifications, SMACNA standards, and DW144 requirements. The role also includes handling</p><p>ATAI accessories and coordinating engineering activities to ensure accurate production drawings and</p><p>project execution.</p><p>Key Responsibilities</p><ul><li><p>Prepare duct tagging and CAMduct input for production.</p></li><li><p>Develop detailed shop drawings and fabrication drawings for HVAC ductwork systems.</p></li><li><p>Review project drawings, specifications, and technical requirements.</p></li><li><p>Provide technical support and guidance related to SMACNA and DW144 standards.</p></li><li><p>Prepare and review material take-offs and project quantities.</p></li><li><p>Handle engineering details and shop drawings for ATAI accessories including:</p></li></ul><p>➢ Dampers</p><p>➢ Air Stacks</p><p>➢ Louvers</p><p>➢ Intake and Discharge Assemblies</p><p>➢ Acoustic Products</p><ul><li><p>Coordinate with production, QA/QC, and project teams to ensure drawing accuracy and compliance.</p></li><li><p>Assist the Engineering Supervisor in daily engineering activities.</p></li><li><p>Ensure all drawings and documents are issued according to project schedules.</p></li><li><p>Maintain engineering records, revisions, and drawing control procedures.</p></li><li><p>Support project execution by resolving technical and engineering-related issues.</p></li></ul><br></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Qualifications</p><ul><li><p>Bachelor's Degree in Mechanical Engineering.</p></li><li><p>Minimum 5 years of experience in HVAC ductwork engineering and detailing.</p></li><li><p>Strong knowledge of SMACNA and DW144 standards.</p></li><li><p>Experience in CAMduct and HVAC drafting software.</p></li><li><p>Proficiency in AutoCAD and Microsoft Office applications.</p></li><li><p>Good communication and coordination skills.</p></li><li><p>Ability to work independently and manage multiple projects simultaneously.</p></li></ul><p></p></section>

<h3><strong>About Matar Al-Baqami Holding</strong></h3><p>Matar Al-Baqami Holding is seeking an experienced <strong>Maintenance Engineer</strong> to join its team in Al Jubail, Eastern Province. This is a full-time position focused on ensuring the operational efficiency and reliability of equipment within animal feed production facilities.</p><h3><strong>Role Overview</strong></h3><p>The Maintenance Engineer will manage and oversee all maintenance activities across animal feed production operations. The primary objective is to minimize equipment downtime, ensure optimal machinery performance, and enhance overall operational efficiency through robust preventive maintenance programs and effective troubleshooting. This role requires specialized expertise in maintaining equipment commonly found in feed mills and related processes.</p><h3><strong>Key Responsibilities</strong></h3><ul><li>Oversee the maintenance and repair of feed mill machinery, including mixers, grinders, pellet mills, conveyors, and ventilation systems.</li><li>Implement and manage preventive and predictive maintenance programs to ensure continuous and efficient operation of equipment.</li><li>Troubleshoot and repair mechanical, electrical, and hydraulic issues in feed mills and poultry farms.</li><li>Ensure compliance with health, safety, and environmental regulations within animal feed production.</li><li>Manage inventory and procurement of spare parts, ensuring availability to avoid production delays.</li><li>Collaborate closely with production and operations teams to ensure minimal disruption in feed production and poultry operations.</li><li>Conduct regular inspections, audits, and maintenance checks to detect early signs of potential failures or maintenance needs.</li><li>Maintain accurate maintenance records, logs, and reports, tracking repairs and service history for all equipment.</li><li>Lead and supervise a team of maintenance technicians, providing guidance and training to improve technical skills.</li><li>Develop and implement energy-saving initiatives and cost-effective maintenance solutions to optimize plant operations.</li><li>Coordinate with external contractors for specialized repair and servicing as needed.</li><li>Monitor production downtime and work to improve equipment uptime by addressing root causes of mechanical failures.</li></ul><h3><strong>Qualifications and Experience</strong></h3><p>Candidates for this role should possess <strong>8 years of experience</strong> in maintenance engineering, with a strong background in managing equipment within animal feed production or similar industrial environments. Expertise in maintaining feed mill machinery and related processes is essential.</p><h3><strong>Operational Focus</strong></h3><p>The role demands a proactive approach to maintenance, focusing on both preventive strategies and efficient troubleshooting. The Maintenance Engineer will be instrumental in upholding operational standards, ensuring safety, and contributing to the continuous improvement of production processes within the animal feed sector.</p><h3><strong>Application Information</strong></h3><p>Salary for this position will be discussed during the interview process. Qualified candidates are encouraged to apply.</p>

<div dir="rtl"><h3 >نبذة عن الدور</h3> <p >تبحث شركة سالم للتوكيلات والخدمات عن <strong >مهندس كهربائي</strong> للانضمام إلى فريقها في <strong >الجبيل، المنطقة الشرقية</strong>. يركز هذا الدور بدوام كامل على إعداد التصاميم والمخططات الكهربائية ومتابعة تنفيذها، بالإضافة إلى تشخيص الأعطال وتطوير برامج التشغيل والصيانة للمعدات والأنظمة الكهربائية.</p> <h3 >المهام والمسؤوليات الرئيسية</h3> <ul > <li >إعداد التصاميم والمخططات الكهربائية لمشاريع وأعمال الهندسة الكهربائية ومتابعة التنفيذ.</li> <li >إعداد مخططات ومواصفات خطوط شبكات النقل والتوزيع الكهربائية وتحديد مساراتها.</li> <li >إعداد برامج تشغيل الأنظمة والمعدات الكهربائية بما يتوافق مع متطلبات العمل.</li> <li >تشخيص أعطال الأجهزة والمعدات الكهربائية ومتابعة إجراءات الإصلاح والمعالجة.</li> <li >إعداد برامج الصيانة الوقائية للأجهزة والمعدات والشبكات الكهربائية بناءً على توصيات الشركة المصنعة والتعليمات المعتمدة.</li> <li >تطوير أساليب وإجراءات العمل ومواكبة أحدث التطورات التقنية في مجال الهندسة الكهربائية.</li> <li 0="" 6px;"="">إعداد الوثائق والتقارير المتخصصة بنتائج الدراسات والتحاليل المتعلقة بالأعمال والمشروعات الهندسية ونسب تقدمها.</li> <li 0="" 6px;"="">عرض وتوضيح هذه التقارير وحفظها في قاعدة البيانات المخصصة وفقاً للسياسات والإجراءات المعتمدة.</li> </ul> <h3 >التخطيط والتطوير الهندسي</h3> <p >يتضمن الدور مسؤولية محورية في التخطيط والتطوير، حيث يقوم المهندس بإعداد المخططات التفصيلية لشبكات النقل والتوزيع الكهربائية، وتحديد مساراتها بدقة. كما يشمل ذلك تطوير برامج تشغيل المعدات الكهربائية في المشاريع الصناعية لضمان الكفاءة التشغيلية.</p> <h3 >الصيانة والتحليل الفني</h3> <p >يُعنى المهندس الكهربائي بتشخيص الأعطال في الأجهزة والمعدات الكهربائية، ومتابعة جميع إجراءات الإصلاح والمعالجة اللازمة. ويشمل ذلك أيضاً إعداد برامج الصيانة الوقائية لضمان استمرارية عمل الأجهزة والشبكات الكهربائية وتقليل الأعطال المحتملة.</p> <h3 >المؤهلات والخبرات المطلوبة</h3> <ul > <li >خبرة عملية تتراوح بين <strong >صفر وسنة واحدة</strong> في مجال الهندسة الكهربائية أو ما يعادلها.</li> <li >القدرة على إعداد التصاميم والمخططات الفنية الكهربائية.</li> <li >مهارات في تشخيص الأعطال الكهربائية وتطوير برامج التشغيل والصيانة.</li> <li >الالتزام بتطوير أساليب العمل ومواكبة التطورات التقنية في المجال.</li> </ul> <h3 >موقع العمل ومعلومات إضافية</h3> <p >هذه الوظيفة بدوام كامل ومقرها في <strong >الجبيل، المنطقة الشرقية</strong>. الراتب الخاص بهذا الدور <strong >غير معلن</strong>.</p></div>

<h3 >About WSP and the Opportunity</h3> <p >WSP is seeking a <strong >Planning Engineer-Water Transmission</strong> to join our team in Al Jubail. This full-time role is critical for supporting large-scale water transmission and pipeline infrastructure projects, requiring a professional with 5-10 years of relevant experience.</p> <h3 >Role Overview</h3> <p >The Planning Engineer will be responsible for the comprehensive planning, scheduling, monitoring, and reporting activities throughout the project lifecycle. This position ensures the implementation of effective project controls, robust schedule management, and accurate progress tracking for critical infrastructure developments.</p> <h3 >Key Responsibilities</h3> <ul > <li >Develop, maintain, and update detailed project schedules using Primavera P6.</li> <li >Prepare baseline programmes, recovery schedules, and look-ahead plans.</li> <li >Monitor project progress and identify potential delays, risks, and mitigation measures.</li> <li >Coordinate with project managers, engineering, procurement, and construction teams to ensure schedule alignment.</li> <li >Analyze project performance and prepare weekly and monthly progress reports.</li> <li >Track critical path activities and provide schedule impact assessments.</li> <li >Support claims analysis, extension of time (EOT) evaluations, and change management processes.</li> <li >Review contractor schedules and validate progress against planned milestones.</li> <li >Ensure compliance with project controls procedures and client reporting requirements.</li> </ul> <h3 >Required Experience</h3> <p >Candidates should possess 5-10 years of experience in project planning and scheduling, specifically within large-scale infrastructure projects. Proficiency in using Primavera P6 for schedule development and management is essential.</p> <h3 >Preferred Project Background</h3> <p >Preference will be given to individuals with demonstrated experience on large water transmission networks, including reservoirs, pumping stations, and associated infrastructure. Experience working on EPC (Engineering, Procurement, and Construction), design-build, or consultancy-led projects is also highly valued.</p> <h3 >Application Information</h3> <p >WSP invites qualified professionals to apply for this position and contribute to significant water infrastructure developments in Al Jubail.</p>

<h3 >About TASNEE and the Role</h3> <p >TASNEE is seeking a <strong >Process Engineer III</strong> to join its team in Al Jubail. This is a full-time position focused on optimizing and enhancing plant operations within the facility. The role involves contributing to the continuous improvement of manufacturing processes and ensuring operational efficiency.</p> <h3 >Role Purpose</h3> <p >The primary purpose of this role is to oversee and improve various plant operations, ensuring efficiency, safety, and optimal output. The Process Engineer III provides critical technical support and expertise to plant operations, playing a key part in process evaluation and enhancement initiatives.</p> <h3 >Key Responsibilities</h3> <ul > <li >Provide technical inputs and support to plant operations, including preparing various Heat &amp; Material balance scenarios.</li> <li >Evaluate plant processes and proposed design changes, considering environmental and economic aspects.</li> <li >Collaborate closely with process chemists and control engineers to ensure the plant is configured for maximum output levels and efficient operation.</li> <li >Set up scale-up and scale-down processes, incorporating appropriate changes to equipment design and configuration.</li> <li >Evaluate the design, installation, and commissioning of new projects, including monitoring developments and troubleshooting.</li> <li >Perform process simulations, assessing options for plant expansion or reconfiguration by developing and testing process simulation models.</li> <li >Conduct risk assessments, manage cost and time constraints, provide process documentation and operating instructions, and develop best practices, routines, and innovative solutions to improve production rates and quality of output.</li> <li >Optimize production through process analysis; troubleshoot manufacturing process problems, evaluate equipment and processes for compliance with safety and environmental regulations, propose improved manufacturing processes, and apply new technologies.</li> </ul> <h3 >Qualifications and Experience</h3> <p >Candidates for this full-time role should possess <strong >5 to 10 years of relevant experience</strong> in process engineering, ideally within a plant operations or manufacturing environment.</p> <h3 >Work Environment</h3> <p >This position is based in <strong >Al Jubail</strong> and requires a proactive approach to monitoring and enhancing plant operations. The role involves collaboration with various technical teams to ensure operational excellence.</p> <h3 >Application Information</h3> <p >Interested candidates who meet the specified experience requirements are encouraged to apply to contribute to TASNEE's ongoing success in Al Jubail.</p>

<h3 >About the Role</h3> <p >ENGIE Middle East is seeking a <strong >Senior Shift Engineer</strong> for a full-time position in Al Jubayl, Saudi Arabia. This role is central to ensuring the safe and efficient operation of the plant by leading the entire operations shift team. The Senior Shift Engineer will be responsible for making accurate and timely decisions regarding plant processes and performance, consulting with the Operations Manager as needed. The position requires a detailed understanding and practical experience with technologies used in modern process plants for power generation and desalinated water production.</p> <h3 >Key Responsibilities</h3> <ul > <li >Provide leadership for the safe, reliable, and efficient operations of the plant.</li> <li >Ensure compliance with the Safety Management and Environment Management Systems, where applicable, and support IMS Compliance and Certification.</li> <li >Implement and ensure adherence to all operations-related policies and procedures.</li> <li >Coordinate effectively between the operations and maintenance teams.</li> <li >Ensure operations shifts are adequately staffed and required resources are available for the team to operate the plant safely, reliably, and efficiently.</li> <li >Coordinate with operations and maintenance teams regarding routine, preventive, and predictive maintenance requirements.</li> <li >Monitor the quality and actions taken on defects and work orders.</li> <li >Provide support to the maintenance team in organizing and executing crucial maintenance works, including analyzing and finding solutions for recurring problems.</li> <li >Set objectives for self and subordinates in line with departmental targets, perform periodical reviews, and provide guidance and mentoring for individual development.</li> <li >Ensure periodic reviews and updates of Standard Operating Procedures (SOPs) and instructions to maintain controlled and consistent work execution.</li> <li >Prepare the team's operational budget and track its expenditure.</li> <li >Provide operational inputs for the preparation of budgets for plant chemicals and Sea Water Requirements.</li> </ul> <h3 >Accountabilities</h3> <p >The Senior Shift Engineer is accountable for ensuring the smooth running of Shift Operations with compliance in the following areas:</p> <ul > <li >HSE (Audit &amp; Procedural Compliance)</li> <li >IMS (Audit &amp; Procedural Compliance)</li> <li >Plant Operations Targets</li> <li >Quality of Reports and Reporting System (all operations-related reports)</li> </ul> <h3 >Required Skills and Experience</h3> <ul > <li >5-10 years of practical experience in operating modern process plants associated with power generation and desalinated water production.</li> <li >Demonstrated excellent communication and leadership skills.</li> <li >Ability to work under own initiative with a high level of drive, energy, and motivation.</li> <li >Detailed understanding of relevant technologies.</li> </ul> <h3 >Business Unit and Legal Entity</h3> <p >This position is part of the <strong >GBU Renewables &amp; Flexible Power</strong> Business Unit and the <strong >GEN International - KSA</strong> Division. The legal entity for this role is <strong >JUBAIL O&amp;M COMPANY LIMITED</strong>.</p> <h3 >Application Information</h3> <p >This is a full-time position, and the salary will be disclosed during the application process. Qualified candidates are encouraged to apply.</p>

<h3 >Role Overview</h3> <p >ArcelorMittal Tubular Products Al-Jubail is seeking an experienced <strong >Engineer Order Execution</strong> to join their team in Al Jubail, Eastern, Saudi Arabia. This full-time role is central to coordinating and managing the technical aspects of order execution, ensuring strict compliance with customer specifications and timely delivery of products.</p> <h3 >Position Summary</h3> <p >The Engineer Order Execution will work closely with various internal departments, including sales, supply chain/logistics, finance, and production, to facilitate seamless order processing. This position is critical for identifying and resolving technical issues or potential delays throughout the order execution lifecycle, contributing to overall operational efficiency and customer satisfaction.</p> <h3 >Key Responsibilities</h3> <ul > <li >Coordinate and manage all technical aspects related to order execution.</li> <li >Ensure that all orders adhere to customer specifications and contractual agreements.</li> <li >Monitor and track order progress to guarantee on-time delivery.</li> <li >Collaborate effectively with sales, supply chain/logistics, finance, and production teams for smooth order execution.</li> <li >Identify and resolve any technical issues or delays that may arise during the order execution process.</li> <li >Maintain accurate and current records for all orders and associated documentation.</li> <li >Provide regular reports on order status and performance metrics to the Order Execution Manager.</li> <li >Develop and implement strategies aimed at improving order execution processes.</li> <li >Deliver professional presentations and reports to clients and stakeholders.</li> <li >Ensure thorough organization and reliable follow-up on all order activities.</li> </ul> <h3 >Required Qualifications</h3> <ul > <li >Bachelor’s degree in Engineering, with a preference for mechanical, manufacturing, industrialization, petroleum, or metallurgy specializations.</li> <li >A minimum of <strong >10 years of experience</strong> in a relevant field.</li> </ul> <h3 >Essential Skills and Knowledge</h3> <ul > <li >Strong technical knowledge of Oil Country Tubular Goods (OCTG) products and solutions.</li> <li >Ability to clearly explain complex technical information to non-technical customers.</li> </ul> <h3 >Work Environment</h3> <p >This is a full-time position based in Al Jubail, Eastern, Saudi Arabia, within a dynamic team focused on ensuring efficient and compliant order execution for ArcelorMittal Tubular Products Al-Jubail.</p>

<h3 >About KBR Saudi Arabia</h3> <p >KBR Saudi Arabia is seeking a <strong >Quality Assurance Electrical Engineer</strong> to join its team in Al Jubail. KBR Sustainable Technology Solutions (STS) provides holistic and value-added solutions across the entire asset life cycle. These offerings include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design capabilities, and smart solutions to optimize planned and operating assets.</p> <h3 >Role Overview</h3> <p >The Quality Assurance Electrical Engineer will be responsible for overseeing and ensuring the quality and compliance of electrical works within various projects, including units of SATORP. This full-time role focuses on maintaining high standards throughout the installation, commissioning, and handover phases, ensuring all activities align with contract specifications and quality plans.</p> <h3 >Key Responsibilities</h3> <ul > <li >Supervise and follow up on the progress of electrical works, installation, and commissioning for different SATORP units.</li> <li >Plan and control the inspection processes for all electrical works and related activities.</li> <li >Monitor the final inspection of completed electrical works before handing over to the Client.</li> <li >Review electrical shop drawings and vendor drawings to ensure compliance with Contract Documents.</li> <li >Evaluate electrical materials submittals for adherence to Contract Documents.</li> <li >Examine electrical specifications and calculations to confirm conformance with Contract Documents.</li> <li >Implement the SATORP Electrical Quality Assurance Plan.</li> <li >Review as-built drawings of electrical works, operation &amp; maintenance manuals, and warranties.</li> </ul> <h3 >Safety and Environmental Compliance</h3> <ul > <li >Ensure strict compliance with all established safety procedures.</li> <li >Encourage the reporting of unsafe acts and conditions within the workplace.</li> <li >Comply with all Safety, Health, and Environment (SHE) procedures prior to commencement and during work activities.</li> </ul> <h3 >Required Experience</h3> <p >Candidates for this full-time position should possess <strong >5 to 10 years of relevant experience</strong> in electrical engineering, with a proven background in quality assurance and compliance within industrial or large-scale project environments.</p> <h3 >Application Details</h3> <p >This is a full-time role based in Al Jubail. Salary for this position will be discussed directly with qualified candidates during the interview process.</p>

<h3><strong>About the Role</strong></h3><p>Tasnee (National Industrialization Co.) is seeking a <strong>Business Planning Engineer</strong> to join their team in Al Jubail. This full-time position is designed for professionals with 2-5 years of relevant experience who are ready to contribute to strategic business planning and operational coordination within the company.</p><h3><strong>Role Purpose and Core Functions</strong></h3><p>The primary purpose of this role is to perform duties related to inventory management, pipeline sales, and contract review. The Business Planning Engineer will be responsible for preparing the annual production plan and monthly forecasts, conducting price calculations, and developing management presentations. This position requires proficiency in data analysis and maintaining departmental databases to support informed decision-making.</p><h3><strong>Key Responsibilities</strong></h3><ul><li>Prepare ongoing forecasts in coordination with raw material and utilities suppliers, and olefins buyers, to ensure optimal capacity planning.</li><li>Coordinate and liaise with government departments, private parties, and neighboring companies regarding raw material, feedstock supplies, utilities, and business forecast requirements.</li><li>Update the department database and master sheets with production, consumption, sales, and other performance indicators on a daily, weekly, or monthly basis, and communicate these to other department users.</li><li>Prepare and review prices in conjunction with pipeline sales quantities for month-end closing procedures.</li><li>Prepare and review Supply Agreements for utilities, raw materials, and pipeline sales.</li><li>Develop and monitor the economic model and olefin inventory management to facilitate TASNEE’s management decision-making process for overall profitability.</li><li>Support plant operations with tolling forecasts and coordinate with all involved parties.</li><li>Collaborate with team members to prepare high-level management presentations, charts, reports, and analyses as requested by the department, prioritizing tasks effectively.</li><li>Participate in on-call duty and Eid holiday coverage on a rotational basis to complete or coordinate emergency and critical tasks.</li><li>Propose annual business plan contributors to management.</li><li>Ensure compliance with all relevant safety, quality, and environmental management procedures and controls within the defined area of activity.</li></ul><h3><strong>Qualifications and Required Skills</strong></h3><p>Candidates for this position should possess 4 years of experience in a relevant business planning or analytical role. Essential skills include proficiency in Microsoft Excel for data management and analysis, as well as strong capabilities in Microsoft PowerPoint for preparing clear and impactful management presentations, including the development of charts and graphs. The role requires effective communication skills for interacting with customers, suppliers, and regulators.</p><h3><strong>Team Collaboration and Operational Support</strong></h3><p>This role involves significant coordination with internal and external stakeholders, including raw material and utilities suppliers, olefins buyers, government departments, and neighboring companies. The Business Planning Engineer will work collaboratively with other team members to ensure smooth operations and contribute to strategic planning. Adherence to safety, quality, and environmental standards is a fundamental aspect of the role.</p><h3><strong>Application Information</strong></h3><p>We invite qualified candidates to apply for this full-time position in Al Jubail. Further details regarding the application process will be provided upon interest.</p>

<h3 >Company Overview and Role Introduction</h3> <p >Tasnee, established in 1985, is the Saudi private sector's first fully owned joint-stock industrial company, dedicated to advancing economic diversification in Saudi Arabia. We are seeking a <strong >Process Safety Engineer</strong> to join our team in Al Jubail, KSA. This is a full-time position that plays a crucial role in maintaining operational safety.</p> <h3 >Purpose of the Process Safety Engineer Role</h3> <p >The primary purpose of this role is to support the development and implementation of robust safety processes and procedures. The Process Safety Engineer contributes to ensuring a safe, incident-free environment and fostering a proactive safety culture throughout Tasnee's operations.</p> <h3 >Key Responsibilities</h3> <ul > <li >Review processes for potential hazards and propose interventions to ensure safe operational activity.</li> <li >Incorporate safety precautions, mechanisms, and standards to establish safe operating procedures and systems applicable to operational, engineering, and maintenance activities.</li> <li >Maintain current knowledge of international and industry safety best practices to provide pertinent recommendations.</li> <li >Conduct detailed analyses of operational, maintenance, and new project activities with potentially significant risks prior to commencement, preparing risk assessments and suggesting control measures.</li> <li >Maintain organizational risk profiling with monitoring mechanisms throughout different stages of plant operations.</li> <li >Study existing and new engineering projects and processes from a design and construction perspective, suggesting and incorporating safety standards and specifications to ensure a safe working environment during construction and operating phases.</li> <li >Provide guidelines on safety aspects before and during alterations and modifications to existing engineering systems to prevent incidents.</li> <li >Identify new safety hazards likely to arise from alterations or modifications and recommend control measures.</li> <li >Regularly inspect sites and conduct surveys on accident-prone areas to ensure compliance with safe working procedures and standards.</li> <li >Investigate minor incidents independently and participate in investigation teams for major incidents.</li> <li >Brief team members on safety procedures and systems related to accidents, conduct root cause analyses, and draft investigation reports for management review.</li> <li >Assist in the development of awareness and training programs designed to instruct employees on Process Safety issues.</li> <li >Make recommendations on and implement departmental policies and procedures covering all areas of department activity to deliver quality, cost-effective service to internal customers.</li> <li >Provide coaching to colleagues and share technical expertise with peers to promote teamwork and cooperation within and across departments.</li> <li >Ensure adherence to all relevant safety, quality, and environmental procedures, instructions, and controls to guarantee safety, product/service quality, and environmental compliance.</li> <li >Perform other related duties or assignments as directed.</li> </ul> <h3 >Educational Qualifications</h3> <ul > <li >Bachelor’s degree in Chemical Engineering or Process Safety Engineering.</li> </ul> <h3 >Required Experience and Skills</h3> <ul > <li >More than 2 years of experience within a reputable Oil &amp; Gas organization.</li> <li >Proven successful records of efficiency, performance, and achievements.</li> </ul> <h3 >Reporting and Location</h3> <p >This full-time position is based in Al Jubail, KSA, and reports directly to the Superintendent, Loss Control.</p>