وظائف مهندس تصميم ميكانيكي - المنطقة الشرقية السعودية

<div dir="rtl"><h3 >About the Role</h3> <p >Arin Lab is looking for a <strong >Training Software Designer Specialist</strong> to join its team in <strong >Al-Khobar, Eastern Province</strong>. This is a full-time role focused on contributing to the development and delivery of high-quality training programs. The role requires a candidate capable of working within a team of specialists in a dynamic environment.</p> <h3 >Job Objective</h3> <p >This role aims to prepare and develop professional standards and curricular frameworks, as well as coordinate the process of preparing and developing training programs effectively. The role also includes responsibility for preparing reports and the necessary documentation to document all aspects of the preparation and development of training programs.</p> <h3 >Key Responsibilities</h3> <ul > <li >Set priorities and form specialized teams to prepare professional standards, in collaboration and coordination with employer representatives.</li> <li >Monitor accreditation procedures of professional standards by the relevant authorities to ensure compliance with requirements.</li> <li >Prepare curricular frameworks based on the approved professional standards, in collaboration with employer representatives.</li> <li >Monitor the accreditation of frameworks by the relevant authorities to ensure proper implementation.</li> </ul> <h3 >Curriculum and Training Units Development</h3> <ul > <li >Form specialized technical committees to produce training units according to the defined curriculum frameworks.</li> <li >Monitor the work of technical committees and audit their outputs, and follow up on accreditation by the competent authority.</li> <li >Evaluate and continuously develop training units to ensure their effectiveness and suitability.</li> <li >Develop methods for preparing standards for training units and keep pace with scientific and technological development in the field of program and unit design.</li> <li >Prepare specialized reports and documents related to the production of programs, curricula, and training units, and store them in the dedicated database.</li> </ul> <h3 >Required Qualifications and Experience</h3> <ul > <li >Practical experience ranging from <strong >0 to 1 year</strong> in the field of training program design or curriculum development.</li> <li >Ability to prepare and develop professional standards and curriculum frameworks.</li> <li >Strong coordination and collaboration skills with various stakeholders.</li> <li >Proficiency in preparing and safeguarding specialized reports and documents.</li> </ul> <h3 >Work Environment</h3> <p >This is a full-time position based in <strong >Al-Khobar, Eastern Province</strong>. Salary will be determined based on qualifications and experience during the recruitment process.</p></div>

<p>Sales engineer in the industrial sector or oil and gas&nbsp;</p>

<p dir="rtl" ><span><b>Civil Engineer – Real Estate Development Projects</b></span></p> <p ><b><span></span><br></b></p> <p dir="rtl" ><span><b>The entity announces its need for a civil engineer located in the Eastern Province with experience in real estate development projects, possessing high efficiency in technical follow-up and quantity surveying, and proficiency in dealing with specialized engineering software.</b></span></p> <p ><b><span></span><br></b></p> <p dir="rtl" ><span><b>Job Duties:</b></span></p> <p ><b><span></span><br></b></p> <ul> <li><span ><b>Supervision and technical follow-up of real estate development projects.</b></span></li> <li><span ><b>Accurate quantity surveying and preparation of technical tables and reports.</b></span></li> <li><span ><b>Using engineering software for surveying, follow-up, and work management.</b></span></li> <li><span ><b>Following up on the execution of works according to approved plans and specifications.</b></span></li> <li><span ><b>Coordination with contractors, engineering offices, and consultants.</b></span></li> <li><span ><b>Submitting periodic reports on progress rates and quality of execution.</b></span></li> </ul> <p ><b><span></span><br></b></p> <p ><b><span></span><br></b></p> <p dir="rtl" ><span><b>Qualifications and Requirements:</b></span></p> <p ><b><span></span><br></b></p> <ul> <li><span ><b>Bachelor's degree in Civil Engineering.</b></span></li> <li><span ><b>Practical experience in real estate development projects.</b></span></li> <li><span ><b>Proficiency in surveying software and related engineering software.</b></span></li> <li><span ><b>Valid driver's license.</b></span></li> <li><span ><b>Willingness to travel and conduct field follow-up.</b></span></li> </ul> <p ><b><span></span><br></b></p> <p ><b><span></span><br></b></p> <p dir="rtl" ><span><b>Required Skills:</b></span></p> <p ><b><span></span><br></b></p> <ul> <li><span ><b>High accuracy in quantity surveying and analysis.</b></span></li> <li><span ><b>Strong ability in field follow-up and quality control.</b></span></li> <li><span ><b>Time management and organization skills.</b></span></li> <li><span ><b>Effective communication skills with team members.</b></span></li> <li><span ><b>Ability to work under pressure and take responsibility.</b></span></li> <li><span ><b>Professional commitment and discipline.</b></span></li> </ul> <p ><b><span></span><br></b></p>

<h4>Job Duties and Description</h4>- An electrical engineer with proven experience in the Saudi Electricity Company’s standard contract is required.<h4>Terms and Skills</h4><ul><li>Bachelor of Electrical Engineering</li><li>Practical experience of at least 5 years in energy or distribution projects</li><li>Full familiarity with work procedures, technical requirements, and monitoring system in energy projects</li><li>Ability to work on Saudi Electricity Company projects, with a permit and approval to work at company sites</li><li>Proficiency in reading electrical drawings, preparing technical reports, and following up on contractors’ works</li><li>Commitment to health and safety standards specific to the energy sector</li></ul><p>Field of work: Engineering - Electrical<br>Job location: Dammam, Eastern Province<br>Job type: Full-time<br>Salary range: Not specified<br>Gender: Male<br>This job is open to: Saudi or expatriate<br>Minimum education level: Bachelor's degree<br>Minimum experience level: Intermediate (4 to 10 years of experience)</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The Mechanical / Static Equipment Engineer Specialist will lead the mechanical design review, construction support, commissioning, testing, and engineering activities for new shale gas facilities. The role requires extensive experience with static and rotating equipment in oil and gas production facilities, along with a strong understanding of plant operations, process technologies, equipment reliability, and maintenance. The successful candidate will provide technical leadership throughout the project lifecycle, from engineering design and installation to commissioning, startup, operations support, and optimization. The role also requires collaboration with multidisciplinary teams and support for Saudi Aramco's capital investment and business strategy initiatives. Lead mechanical design reviews for new installation and upgrade projects. Develop and review engineering design packages, PFDs, P&amp;IDs, and technical drawings. Provide day-to-day technical support to Operations and Maintenance teams. Troubleshoot static and rotating equipment issues and recommend solutions. Support construction, installation, pre-commissioning, commissioning, and startup activities. Participate in Turnaround &amp; Inspection (T&amp;I) and performance testing activities. Conduct feasibility studies and recommend technical and economic optimization solutions. Lead multidisciplinary teams, prepare technical reports, and support management decisions.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Bachelor s degree in Mechanical, Chemical, or Petroleum Engineering (Master s preferred).</li><li>Minimum 15 years of experience in oil &amp; gas, refinery, petrochemical, or gas processing facilities.</li><li>Strong experience in static equipment (vessels, exchangers, columns, tanks, reactors).</li><li>Good knowledge of rotating equipment (pumps, compressors, turbines).</li><li>Experience in EPC phases: FEED, detailed engineering, construction, and commissioning.</li><li>Strong knowledge of ASME, API, and TEMA codes and standards.</li><li>Working knowledge of engineering software (PVElite, CAESAR II, HTRI).</li><li>Strong communication, leadership, and multidisciplinary coordination skills.</li></ul><p></p></section>

<h3 >About Penspen</h3> <p >Penspen is a global energy services company with over 70 years of experience, providing engineering, project management, asset management, and integrity services to the energy industry. Established in the UK in 1954 as Spencer &amp; Partners, the company has grown to nearly 1,000 staff members with major offices in London, Mexico, Colombia, Houston, Abu Dhabi, and Saudi Arabia.</p> <h3 >Role Overview</h3> <p >Penspen is seeking a <strong >Senior Mechanical Engineer</strong> to join its team in Khafji, Eastern, Saudi Arabia. This full-time role involves providing technical oversight and review for major Oil and Gas/Petrochemical projects, focusing on static mechanical equipment deliverables from EPC contractors.</p> <h3 >Key Responsibilities</h3> <ul > <li >Provide technical oversight and review of EPC contractor deliverables related to static mechanical equipment, including pressure vessels, heat exchangers, tanks, and columns.</li> <li >Review design calculations, datasheets, and specifications to ensure compliance with applicable codes (ASME, API, TEMA) and project standards.</li> <li >Verify material selection, design thickness, and mechanical integrity of equipment.</li> <li >Review vendor documentation and participate in technical bid evaluations and Factory Acceptance Tests (FATs).</li> <li >Monitor EPC contractor progress, assess deviations, and provide recommendations for corrective actions.</li> <li >Ensure that mechanical designs meet safety, operability, and maintainability requirements.</li> <li >Support field inspections and mechanical completion activities, ensuring adherence to quality of deliverables.</li> </ul> <h3 >Qualifications and Experience</h3> <ul > <li >A minimum of twelve (12) years of overall experience.</li> <li >At least six (6) years of experience specifically within the field of Mechanical Engineering for major Oil and Gas/Petrochemical projects.</li> </ul> <h3 >Work Location</h3> <p >This position is based in Al Khafji, Eastern Province, Saudi Arabia.</p> <h3 >Application Process</h3> <p >Penspen offers a professional environment for experienced engineers. Salary details will be discussed during the interview process.</p>

<div dir="rtl"><h3 >نبذة عن الوظيفة</h3> <p >تبحث شركة الكثبان للإستشارات الهندسية وإدارة المشاريع عن <strong >مهندس ميكانيكي</strong> للانضمام إلى فريقها في <strong >الخبر، المنطقة الشرقية</strong>. يتولى شاغل هذا الدور بدوام كامل مسؤولية إعداد التصاميم والمخططات لمشاريع الهندسة الميكانيكية المتنوعة، بالإضافة إلى تخطيط برامج التجميع والتركيب والتشغيل والصيانة الوقائية للمعدات والتجهيزات الميكانيكية. يُعد هذا الدور محوريًا في ضمان كفاءة وسلامة الأنظمة الميكانيكية ضمن المشاريع الصناعية.</p> <h3 >المسؤوليات الرئيسية</h3> <ul > <li >إعداد التصاميم والمخططات الهندسية التفصيلية لمشاريع الهندسة الميكانيكية، بما في ذلك المولدات، التوربينات، وحدات التكييف، المراجل، وشبكات توزيع أنظمة التدفئة والتكييف والتبريد.</li> <li >تطوير خطط وبرامج تجميع وتركيب التجهيزات الميكانيكية للمشاريع الصناعية، وتحديد أنظمة الضبط والتحكم اللازمة.</li> <li >تصميم برامج تشغيل المعدات الصناعية وبرامج الصيانة الوقائية، مع الالتزام بتعليمات الشركات المصنعة ومتابعة إجراءات تنفيذها بفعالية.</li> <li >المساهمة في تطوير أساليب وإجراءات العمل الحالية ومواكبة أحدث التطورات التقنية في مجال الهندسة الميكانيكية.</li> <li >إعداد الوثائق والتقارير المتخصصة المتعلقة بالأعمال والمشروعات الهندسية، وتوثيق نسب تقدمها، وعرضها، وحفظها في قاعدة البيانات المعتمدة وفقًا للسياسات والإجراءات الداخلية.</li> </ul> <h3 >المؤهلات والخبرات</h3> <ul > <li >درجة البكالوريوس في الهندسة الميكانيكية أو ما يعادلها.</li> <li >خبرة عملية تتراوح بين <strong >5 إلى 10 سنوات</strong> في مجال الهندسة الميكانيكية، ويفضل أن تكون في مشاريع استشارية أو صناعية.</li> <li >فهم عميق لمبادئ التصميم الميكانيكي وأنظمة التدفئة والتكييف والتبريد (HVAC).</li> </ul> <h3 >الكفاءات والمهارات</h3> <ul > <li >مهارات ممتازة في إعداد التصاميم والمخططات الهندسية.</li> <li >القدرة على تخطيط وتنظيم برامج التجميع والتركيب والصيانة.</li> <li >مهارات تحليلية قوية والقدرة على حل المشكلات التقنية.</li> <li >إتقان إعداد الوثائق والتقارير الفنية المتخصصة.</li> <li >الالتزام بالتطوير المهني ومواكبة التقنيات الحديثة.</li> </ul> <h3 >بيئة العمل</h3> <p >يعمل المهندس الميكانيكي ضمن فريق متخصص في شركة الكثبان للإستشارات الهندسية وإدارة المشاريع، وهي شركة رائدة في مجالها. تتميز بيئة العمل بالتركيز على الجودة والالتزام بالمعايير الهندسية العالية، مما يوفر فرصة للنمو المهني المستمر في مشاريع متنوعة بالمنطقة الشرقية.</p> <h3 >معلومات إضافية</h3> <p >نوع الوظيفة: <strong >دوام كامل</strong><br>الراتب: <strong >غير معلن</strong></p></div>

<div dir="rtl"><h3 >نبذة عن الدور في مكتب زكريا عبدالرحمن العبدالقادر</h3> <p >يدعو مكتب زكريا عبدالرحمن العبدالقادر للاستشارات الهندسية المهندسين الميكانيكيين للانضمام إلى فريقه في مدينة <strong >الخبر بالمنطقة الشرقية</strong>. هذا الدور متاح بنظام <strong >الدوام الكامل</strong>، وهو مخصص للمهندسين الذين يمتلكون خبرة تتراوح بين <strong >سنتين وخمس سنوات</strong> في مجال الهندسة الميكانيكية، ويتضمن مسؤوليات أساسية في تصميم وتخطيط وتنفيذ المشاريع الميكانيكية.</p> <h3 >طبيعة المسؤوليات الأساسية</h3> <p >يتولى المهندس الميكانيكي في هذا المنصب مسؤولية إعداد التصاميم والمخططات الهندسية لمختلف مشاريع وأعمال الهندسة الميكانيكية. كما يشمل الدور وضع برامج تجميع وتركيب وتشغيل التجهيزات الميكانيكية في المشاريع الصناعية، بالإضافة إلى تطوير برامج تشغيل المعدات الصناعية وبرامج الصيانة الوقائية، وإعداد الوثائق والتقارير الفنية المتخصصة بنتائج الأعمال.</p> <h3 >المهام والواجبات التفصيلية</h3> <ul > <li >إعداد التصاميم والمخططات الهندسية لمشاريع الأعمال الميكانيكية، بما في ذلك المولدات، التوربينات، وحدات التكييف، المراجل، وشبكات التوزيع لأنظمة التدفئة والتكييف والتبريد.</li> <li >وضع خطط وبرامج تجميع وتركيب التجهيزات الميكانيكية للمشاريع الصناعية، وتحديد أنظمة الضبط والتحكم اللازمة في هذه المشاريع.</li> <li >تطوير برامج تشغيل المعدات وبرامج الصيانة الوقائية بحسب تعليمات الشركات الصانعة، ومتابعة إجراءات تنفيذها لضمان الكفاءة التشغيلية.</li> <li >المساهمة في تطوير أساليب وإجراءات العمل الحالية ومواكبة أحدث التطورات التقنية في مجال الهندسة الميكانيكية.</li> <li >إعداد الوثائق والتقارير الفنية المتخصصة المتعلقة بالأعمال والمشروعات الهندسية، وتوثيق نسب تقدمها وعرضها وتوضيحها، وحفظها في قاعدة البيانات الخاصة بها وفقاً للسياسات والإجراءات المعتمدة.</li> </ul> <h3 >متطلبات الخبرة والمؤهلات</h3> <p >لشغل هذا الدور، يجب أن يمتلك المرشح المؤهلات والخبرات التالية:</p> <ul > <li ><strong >خبرة عملية تتراوح بين سنتين وخمس سنوات</strong> في مجال الهندسة الميكانيكية.</li> <li >القدرة على تطبيق المعرفة الهندسية في إعداد التصاميم والمخططات الفنية.</li> <li >مهارات جيدة في إعداد التقارير الفنية وتوثيق الأعمال.</li> </ul> <h3 >موقع العمل ونوعه</h3> <p >تُعد هذه الوظيفة بدوام كامل في مدينة <strong >الخبر، المنطقة الشرقية</strong>. يلتزم المكتب بتوفير بيئة عمل منظمة وداعمة لإنجاز المهام الهندسية بكفاءة.</p> <h3 >عملية التقديم</h3> <p >ندعو المهندسين الميكانيكيين المؤهلين والمهتمين بهذا الدور إلى تقديم طلباتهم. سيتم التواصل مع المرشحين المستوفين للشروط لمتابعة عملية التوظيف.</p></div>

<div dir="rtl"><h3 >نبذة عن الدور</h3> <p >تبحث فرع شركة انجينيرز انديا السعودية عن <strong >مهندس ميكانيكي</strong> للانضمام إلى فريقها في مدينة الخبر بالمنطقة الشرقية. يتطلب هذا الدور خبرة تتراوح بين 5 إلى 10 سنوات، وهو متاح بنظام الدوام الكامل. يركز المهندس الميكانيكي في هذا المنصب على إعداد التصاميم والمخططات لمشاريع الهندسة الميكانيكية، بالإضافة إلى تطوير برامج التجميع والتركيب والتشغيل للمعدات الصناعية.</p> <h3 >الغرض من الوظيفة</h3> <p >يتولى شاغل هذه الوظيفة مسؤولية إعداد التصاميم والمخططات الهندسية الميكانيكية، وتطوير برامج متكاملة لتجميع وتركيب وتشغيل التجهيزات الميكانيكية ضمن المشاريع الصناعية. يشمل ذلك وضع برامج تشغيل للمعدات الصناعية وبرامج للصيانة الوقائية. كما يتضمن الدور إعداد الوثائق والتقارير المتخصصة التي توثق نتائج الأعمال وتقدمها.</p> <h3 >المهام والمسؤوليات الرئيسية</h3> <ul > <li >إعداد التصاميم والمخططات لمشاريع الهندسة الميكانيكية، مثل المولدات والتوربينات ووحدات التكييف والمراجل وشبكات التوزيع لأنظمة التدفئة والتكييف والتبريد.</li> <li >تطوير خطط وبرامج تجميع وتركيب التجهيزات الميكانيكية للمشاريع الصناعية، وتحديد أنظمة الضبط والتحكم اللازمة.</li> <li >إعداد برامج تشغيل المعدات وبرامج الصيانة الوقائية وفقاً لتعليمات الشركات المصنعة، ومتابعة إجراءات تنفيذها.</li> <li >تطوير أساليب وإجراءات العمل ومواكبة التطورات التقنية في مجال الهندسة الميكانيكية.</li> <li >إعداد الوثائق والتقارير المتخصصة بالأعمال والمشروعات الهندسية، وتوثيق نسب تقدمها وعرضها وحفظها في قاعدة البيانات المخصصة وفقاً للسياسات والإجراءات المعتمدة.</li> </ul> <h3 >المؤهلات والخبرات المطلوبة</h3> <ul > <li >شهادة جامعية في الهندسة الميكانيكية أو مجال ذي صلة.</li> <li >خبرة عملية تتراوح بين <strong >5 إلى 10 سنوات</strong> في مجال الهندسة الميكانيكية، ويفضل أن تكون في المشاريع الصناعية.</li> <li >معرفة قوية بمبادئ التصميم الميكانيكي وأنظمة التشغيل والصيانة.</li> <li >القدرة على إعداد المخططات الفنية والتقارير المتخصصة.</li> </ul> <h3 >موقع العمل ونوع التوظيف</h3> <p >يقع مقر العمل لهذه الوظيفة في مدينة <strong >الخبر، المنطقة الشرقية</strong>. الوظيفة بدوام كامل ضمن فريق فرع شركة انجينيرز انديا السعودية.</p> <h3 >معلومات إضافية</h3> <p >الراتب لهذه الوظيفة غير معلن وسيتم تحديده بناءً على الخبرة والمؤهلات خلال عملية التوظيف.</p></div>

<h3><strong>About the Opportunity</strong></h3><p>Penspen, a leading energy services company with over 70 years of global experience, is seeking a <strong>Senior Mechanical Engineer (Asset Integrity - Corrosion)</strong> to join their team in Al Khafji, Eastern region. This is a full-time position focused on ensuring the integrity and longevity of critical energy assets.</p><h3><strong>Role Purpose</strong></h3><p>The primary purpose of this role is to provide essential technical assurance and review for EPC contractor deliverables. The focus will be specifically on materials and corrosion protection within asset integrity projects, requiring a strong background in these specialized areas.</p><h3><strong>Key Responsibilities</strong></h3><ul><li>Evaluate corrosion control strategies, material selection diagrams (MSDs), painting and coating specifications, and cathodic protection designs.</li><li>Review EPC contractor’s corrosion studies to ensure full compliance with applicable industry standards, including NACE, API, and ISO.</li><li>Actively participate in material selection workshops, vendor bid evaluations, and comprehensive design reviews.</li><li>Provide support for site inspections related to corrosion and the application of coatings.</li><li>Verify the correct implementation of corrosion monitoring systems and associated documentation.</li><li>Offer recommendations aimed at enhancing material integrity and improving the lifecycle performance of project facilities.</li></ul><h3><strong>Qualifications and Experience</strong></h3><ul><li>A minimum of <strong>12 years</strong> of relevant professional experience is required.</li><li>Demonstrated expertise in asset integrity and corrosion is essential for this position.</li><li>Proficiency in relevant industry standards such as NACE, API, and ISO.</li></ul><h3><strong>About Penspen</strong></h3><p>Penspen is a global energy services company with a history spanning over 70 years, originally founded in the UK in 1954. The company specializes in providing engineering, project management, asset management, and integrity services to the energy industry worldwide. With nearly 1,000 staff members, Penspen maintains major offices in key locations including London, Mexico, Colombia, Houston, Abu Dhabi, and Saudi Arabia.</p><h3><strong>Application Process</strong></h3><p>Candidates who meet the specified qualifications are encouraged to apply for this full-time position.</p>

<h3 >About the Role</h3> <p >Abdullah A. Al-Barrak &amp; Son Co. is seeking a <strong >Lead Mechanical Engineer</strong> to join our team in Al Khobar, Eastern Province. This full-time position requires a professional with over 10 years of experience to lead the mechanical discipline, with a primary focus on rotating equipment within an EPC environment. The role involves active daily participation in the engineering phase across one or multiple projects.</p> <h3 >Role Context and Contribution</h3> <p >The Lead Mechanical Engineer will be instrumental in guiding mechanical engineering activities from proposals through to commissioning. This includes active participation in bidding processes, providing essential technical support during construction and commissioning, and ensuring engineering excellence. While specializing in rotating equipment, knowledge of static equipment is considered a significant advantage for this role.</p> <h3 >Key Responsibilities</h3> <ul > <li >Plan, schedule, monitor, and control all engineering activities within the Mechanical Discipline.</li> <li >Facilitate interdisciplinary coordination and support team building initiatives.</li> <li >Proactively identify and communicate issues or problems to management for timely resolution.</li> <li >Actively participate in progress review meetings, technical meetings, client meetings, and vendor meetings.</li> <li >Support Procurement activities, including raising Material Requisitions (MR), conducting Technical Bid Clarification/Evaluation (TBC/TBE), and drafting Purchase Requisitions.</li> <li >Assist the bidding team by raising Requests for Quotation (RFQs), performing technical evaluation of bids, and contributing to cost estimation.</li> <li >Provide technical support to construction teams by responding to site-related technical queries (TQ).</li> <li >Review and provide comments on GES plus engineering deliverables as required.</li> <li >Ensure the safety and quality of all deliverables.</li> <li >Participate in Value Engineering practices such as value engineering studies, lessons learned sessions, Risk Assessment/Management Studies and workshops, and Constructability studies and workshops.</li> <li >Strive for customer satisfaction and appreciation.</li> </ul> <h3 >Required Qualifications</h3> <ul > <li >Bachelor’s degree in Mechanical Engineering (BS, BE, or B Tech).</li> <li >Completion of relevant training and certification courses.</li> </ul> <h3 >Experience Requirements</h3> <ul > <li >A minimum of <strong >10 years of combined experience</strong> in the Oil and Gas, Petrochemicals, and Power Industries.</li> <li >Demonstrated experience working with GES plus/EPC Contractors on projects for Saudi Aramco, SABIC, and other reputable organizations.</li> <li >Experience attending Factory Acceptance Test (FAT) and Site Acceptance Test (SAT) activities.</li> <li >Experience providing support for pre-commissioning activities.</li> </ul> <h3 >Application Process</h3> <p >We invite qualified candidates to submit their applications for this Lead Mechanical Engineer position.</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p> </p> <b>Job Description</b> <p> </p> <p> </p> Overview <p> </p> <p>We are looking for an experienced Mechanical Engineer to join our team, supporting the delivery of high-quality engineering solutions within railway projects. This role will be responsible for reviewing technical documentation and supervision of the construction works related with its disciplines, including HVAC, hydraulic systems and fire protection, for new and updated assets of railway facilities. The successful candidate will perform detailed review of documentation including design drawings and reports, shop drawings and as-build documentations ensuring full compliance with applicable standards and requirements, ensuring robust and compliant engineering outcomes. You will work hand with hand with the electrical engineer and will interface with internal and external stakeholders supporting effecting collaboration and ensuring successful project delivery across all stages from the concept design until the final hand-over, including testing and commissioning.</p> <p> </p> Your role <p> </p> <ul> <li> <p>Managing the mechanical and fire protection elements of a project from conceptualisation to completion, ensuring adherence to project design specifications and timelines.</p> </li> <li> <p>Collaborating with cross-functional teams, including designers, contractors and project managers, commercial staff, and project controls team to develop project plans and budgets.</p> </li> <li> <p>Interface with internal and external stake holders as required.</p> </li> <li> <p>Ensuring projects meet specifications, deadlines, and quality standards.</p> </li> <li> <p>Review the technical documentation related with the discipline for completeness and compliance with the project requirements, interface, stakeholder requirements and applicable standards. These will include, not limited to, design submissions at different stages, shop drawings, as-built drawings, calculations, assessments, technical specifications, interface documents, value engineering reports, material requests, system code classifications, bill of quantities.</p> </li> <li> <p>Contribute to produce multidisciplinary reviews of the technical documents to ensure full coordination of the deliverables.</p> </li> <li> <p>Participate in producing and reviewing value engineering proposals.</p> </li> <li> <p>Conduct quality inspections and oversee the installation, testing and commissioning of mechanical and fire protection systems, ensuring compliance with safety standards and regulations.</p> </li> <li> <p>Monitor and report on project progress, identifying and addressing potential issues, and deviations from the baseline(s), in collaboration with the Project Control Teams.</p> </li> <li> <p>Report regularly in accordance with the project and company policies.</p> </li> <li> <p>Ensure adherence to the project and company quality program and policies.</p> </li> <li> <p>Stay updated on the latest engineering technologies and best practices.</p> </li> <li> <p>Provide technical support and guidance to project teams.</p> </li> <li> <p>Promote culture of safety.</p> </li> <li> <p>Perform walkdowns, attend site visits and meetings as required.</p> </li> </ul> <p> </p> About you <p> </p> <ul> <li> <p>Engineering degree from an accredited University in Mechanical Engineering,</p> </li> <li> <p>A minimum of 12 years of experience in mechanical engineering and fire protection, preferably combining construction supervision and technical review.</p> </li> <li> <p>Experience performing engineering work in accordance with railway systems procedures, standards, and practices, and KSA regulatory requirements.</p> </li> <li> <p>Knowledge of environmental and sustainability practices in mechanical engineering.</p> </li> <li> <p>Working knowledge of/experience using mechanical and fire protection codes and standards applicable to railway systems in KSA, including not limited to Saudi Building Code, Civil Defence requirements, NFPA standards.</p> </li> <li> <p>Experience in analysis of project requirements and check for their implementation in technical documentation and in the site works, through site inspections and testing processes.</p> </li> <li> <p>Used to work in coordination with multidiscipline teams and in collaboration with the cross functions of the project organization.</p> </li> <li> <p>Strong problem-solving abilities and the ability to make decisions in dynamic project environments.</p> </li> <li> <p>Good communication skills for effective collaboration with project teams and stakeholders.</p> </li> <li> <p>Detail-oriented with a focus on delivering high-quality mechanical projects.</p> </li> </ul> <p> </p> Rewards &amp; benefits <p> </p> <p>Explore the rewards and benefits that help you thrive at every stage of your life and your career.</p> <p>This includes:</p> <ul> <li> <p>Tax-free salary.</p> </li> <li> <p>Life insurance coverage.</p> </li> <li> <p>Medical insurance.</p> </li> <li> <p>Annual leave balance.</p> </li> <li> <p>Company gratuity scheme.</p> </li> <li> <p>Discretionary bonus program.</p> </li> <li> <p>Annual flight contribution.</p> </li> <li> <p>Transportation &amp; housing allowances.</p> </li> <li> <p>Employee Wellbeing Program: 24/7 access to specialists in finance, legal matters, family care, personal health, fitness, and nutrition.</p> </li> </ul> <p>Seize every opportunity to sharpen your skills, expand your expertise, and be recognized for the impact you make.</p> <p> </p> About AtkinsR alis <p> </p> <p>We're AtkinsR alis, a world-class engineering services and nuclear organization. We connect people, data and technology to transform the world's infrastructure and energy systems. Together, with our industry partners and clients, and our global team of consultants, designers, engineers and project managers, we can change the world. We're committed to leading our clients across our various end markets to engineer a better future for our planet and its people.</p> <p> Find out more. </p> <p> <b>#RailME </b> </p> <p> </p> <b>Worker Type</b> Employee<p> </p> <b>Job Type</b> Regular<p> </p> <p> <i>At </i> <i>AtkinsR alis</i> <i>, we seek to hire individuals with diverse characteristics, backgrounds and perspectives. We strongly believe that world-class talent makes no distinctions based on gender, ethnic or national origin, sexual identity and orientation, age, religion or disability, but enriches itself through these differences. </i> </p></div></section>

<h3><strong>About the Role</strong></h3><p>ABIS is seeking a <strong>Lead Mechanical Engineer</strong> to take charge of the mechanical discipline, specializing in rotating equipment. This full-time role involves active daily engagement during the engineering phase within an EPC (Engineering, Procurement, and Construction) environment, potentially across multiple projects. The position requires participation in proposal and bidding activities, alongside providing essential technical support during construction and commissioning phases.</p><h3><strong>Key Responsibilities</strong></h3><ul><li>Plan, schedule, monitor, and control all engineering activities pertinent to the Mechanical Discipline.</li><li>Ensure effective interdisciplinary coordination and support team building initiatives.</li><li>Proactively identify and highlight issues or problems to management for timely remedial action.</li><li>Actively participate in progress review meetings, technical meetings, client meetings, and vendor meetings.</li><li>Support Procurement activities, including raising Material Requisitions (MRs), conducting Technical Bid Clarification/Evaluation (TBC/TBE), and drafting Purchase Requisitions.</li><li>Assist the bidding team by raising Requests for Quotation (RFQs), performing technical evaluation of bids, and contributing to cost estimation.</li><li>Provide technical support during construction by responding to site-related technical queries (TQs).</li><li>Review and provide comments on GES plus engineering deliverables on a case-by-case basis.</li><li>Ensure the safety and quality of all deliverables.</li><li>Participate in Value Engineering practices such as value engineering studies, lessons learned sessions, Risk Assessment/Management Studies and workshops, and Constructability studies and workshops.</li><li>Strive for customer satisfaction and appreciation.</li></ul><h3><strong>Required Experience</strong></h3><ul><li>A minimum of <strong>10 years of combined experience</strong> in the Oil and Gas, Petrochemicals, and Power Industries.</li><li>Demonstrated experience working with GES plus/EPC Contractors on projects for Saudi Aramco, SABIC, and other reputable organizations.</li><li>Experience in attending Factory Acceptance Test (FAT) and Site Acceptance Test (SAT) activities.</li><li>Experience providing support for pre-commissioning activities.</li></ul><h3><strong>Educational Background</strong></h3><ul><li>Bachelor’s degree in Mechanical Engineering (BS, BE, or B Tech).</li><li>Completion of relevant training and certification courses.</li></ul><h3><strong>Skills and Attributes</strong></h3><p>The ideal candidate will possess strong leadership capabilities within the mechanical discipline, excellent interdisciplinary coordination skills, and a proactive approach to problem-solving. A solid understanding of static equipment is considered an advantage. The role demands a commitment to ensuring safety and quality in all deliverables, coupled with a focus on achieving customer satisfaction.</p><h3><strong>Work Type</strong></h3><p>This is a full-time position requiring dedicated involvement in engineering projects within an EPC framework.</p>

<p>Eram Talent is hiring for a Mechanical Manitenance Engineer - HVAC with core experience in Petrochemical Plants. The candidate would be responsible for maintaining the reliability, availability, and performance of HVAC and Mechanical Refrigeration Units (MRUs) serving critical petrochemical facilities. Leads preventive and predictive maintenance programs, troubleshooting activities, root cause investigations, reliability improvement initiatives, and spare parts optimization to ensure safe and uninterrupted operation.</p><p>Key Responsibilities</p><ul><li>Extensive experience in maintaining, troubleshooting, and optimizing HVAC, chiller, and industrial refrigeration systems in petrochemical and process plant environments.</li><li>Hands-on expertise with Mechanical Refrigeration Units (MRUs), centrifugal, screw, and reciprocating chillers, AHUs, package units, ventilation systems, compressors, condensers, evaporators, pumps, and refrigeration control systems.</li><li>Diagnose and resolve mechanical, electrical, instrumentation, refrigeration, and control-related failures to ensure maximum equipment availability and reliability.</li><li>Analyze operating parameters including temperature, pressure, flow, superheat, subcooling, and compressor performance to identify system abnormalities and implement corrective actions.</li><li>Perform equipment performance evaluations, condition assessments, and reliability improvements to minimize downtime and optimize energy efficiency.</li><li>Proficient in interpreting HVAC/refrigeration schematics, P&amp;IDs, electrical drawings, and OEM technical documentation.</li><li>Experienced in Building Management System (BMS) and HVAC control systems, including monitoring equipment performance, troubleshooting control logic , analyzing alarms, optimizing system operation, and integrating HVAC assets with centralized monitoring and control platforms.</li><li>Perform RCI investigations for critical and repetitive equipment failures.</li><li>Implement corrective and preventive actions to improve equipment reliability.</li></ul><p>Preventive &amp; Predictive Maintenance</p><ul><li>Develop and optimize preventive maintenance programs based on equipment criticality and reliability data.</li><li>Ensure timely completion of maintenance plans and work orders.</li></ul><p>Spare Parts Management</p><ul><li>Review and optimize HVAC spare parts inventory.</li><li>Identify critical and insurance spare parts requirements.</li><li>Establish minimum and maximum inventory levels based on risk and lead times.</li><li>Coordinate with procurement and warehouse teams to ensure spare availability.</li><li>Support obsolescence management and spare part standardization initiatives.</li></ul><p>Safety &amp; Compliance</p><ul><li>Ensure compliance with company safety regulations and engineering standards.</li><li>Participate in PSSR, risk assessments, and incident investigations when required.</li><li>Support process safety requirements related to HVAC systems serving critical occupied buildings.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Minimum of 10 years experience in petrochemical, refinery, oil &amp; gas</li><li>Bachelor Degree in Engineering</li><li>HVAC, Chillers &amp; Industrial Refrigeration Systems Maintenance &amp; Troubleshooting</li><li>MRU Operation and Maintenance</li><li>Reliability Engineering</li><li>Preventive &amp; Predictive Maintenance</li><li>RCI</li><li>Spare Parts Optimization</li><li>Building Management Systems (BMS)</li></ul>

<p><strong>Job Summary:</strong> CROWN Arabia Can Company Ltd is seeking a skilled Front End Mechanic to maintain and repair industrial machinery and equipment, ensuring optimal operational efficiency and minimizing downtime in our manufacturing facility.</p><p><strong>Job Responsibilities:</strong></p><ul><li>Perform routine preventative maintenance on a variety of front-end production machinery, including presses, trimmers, flangers, and seaming machines.</li><li>Diagnose mechanical, electrical, pneumatic, and hydraulic issues with production equipment and implement effective repairs.</li><li>Troubleshoot complex machinery malfunctions and identify root causes to prevent reoccurrence.</li><li>Execute precise adjustments and calibrations to ensure machinery operates according to specifications.</li><li>Disassemble, repair, and reassemble mechanical components, including gears, bearings, shafts, and motors.</li><li>Read and interpret technical manuals, schematics, and blueprints to aid in troubleshooting and repair.</li><li>Document all maintenance and repair activities accurately and in a timely manner.</li><li>Collaborate with production teams to identify and address potential equipment issues proactively.</li><li>Adhere to all safety regulations and company policies while performing duties.</li><li>Assist in the installation and commissioning of new machinery and equipment.</li><li>Maintain a clean and organized work area.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>High school diploma or equivalent; vocational training or certification in industrial maintenance, mechanics, or a related field is highly preferred.</li><li>Minimum of 3-5 years of experience as a mechanic in a manufacturing or industrial setting, preferably with experience on can-making or similar high-speed production machinery.</li><li>Strong mechanical aptitude and hands-on experience with a wide range of industrial equipment.</li><li>Proficient in diagnosing and repairing mechanical, electrical (up to 480V), pneumatic, and hydraulic systems.</li><li>Ability to read and interpret technical drawings, schematics, and equipment manuals.</li><li>Familiarity with various hand and power tools, and precision measuring instruments.</li><li>Strong problem-solving skills and attention to detail.</li><li>Excellent communication and interpersonal skills.</li><li>Ability to work independently and as part of a team in a fast-paced environment.</li><li>Must be able to work various shifts, including nights and weekends, as needed.</li><li>Physical ability to lift heavy objects, stand for extended periods, and work in various positions.</li></ul>

<div dir="rtl"><h3 >نبذة عن الدور</h3> <p >تعلن شركة سراكو شركة شخص واحد عن توفر وظيفة <strong >فني ميكانيكي مركبات</strong> بدوام كامل في مدينة حفر الباطن، ضمن المنطقة الشرقية. يهدف هذا الدور إلى ضمان الأداء الأمثل للمركبات من خلال الإشراف على عمليات التركيب، وتحديد القطع التبديلية المناسبة وتأمينها، بالإضافة إلى إجراء الفحوصات الدورية وتشخيص الأعطال ومتابعة جميع إجراءات الإصلاح. يتطلب الدور خبرة عملية تتراوح بين سنتين إلى خمس سنوات في المجال.</p> <h3 >المهام والمسؤوليات الرئيسية</h3> <ul > <li >متابعة دقيقة لعمليات تركيب المركبات الميكانيكية والتأكد من تطبيق إجراءات التشغيل القياسية.</li> <li >تحديد القطع التبديلية المطلوبة بدقة، ومطابقة مواصفاتها الفنية مع المتطلبات، والعمل على تأمينها بفعالية.</li> <li >تنفيذ إجراءات استلام المركبات الميكانيكية المخصصة للصيانة الدورية والخدمة والإصلاح.</li> <li >فحص المركبات وتشخيص الأعطال الميكانيكية والكهربائية بدقة، ومتابعة تنفيذ خطط الإصلاح لضمان الجودة.</li> <li >الالتزام الصارم بجميع سياسات وإجراءات الصحة والسلامة والبيئة المعمول بها في الشركة.</li> </ul> <h3 >المؤهلات والخبرات</h3> <ul > <li >خبرة عملية مثبتة تتراوح بين <strong >سنتين إلى خمس سنوات</strong> في مجال ميكانيكا المركبات أو في دور فني مماثل.</li> </ul> <h3 >المهارات المطلوبة</h3> <ul > <li >فهم شامل لأنظمة المركبات الميكانيكية ومكوناتها.</li> <li >قدرة عالية على تشخيص الأعطال الفنية بدقة وفعالية.</li> <li >مهارات متقدمة في تحديد القطع التبديلية ومطابقة المواصفات.</li> <li >الالتزام الصارم بتطبيق سياسات وإجراءات الصحة والسلامة والبيئة.</li> </ul> <h3 >تفاصيل الوظيفة</h3> <ul > <li >نوع العقد: <strong >دوام كامل</strong></li> <li >موقع العمل: <strong >حفر الباطن، المنطقة الشرقية</strong></li> <li >الراتب الشهري: <strong >6000 ريال سعودي</strong></li> </ul> <h3 >التقديم للوظيفة</h3> <p >ندعو الكفاءات المؤهلة والمهتمة بهذه الفرصة للانضمام إلى فريق عمل شركة سراكو شركة شخص واحد.</p></div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>We are looking for an Electrical Design Engineer to develop, improve, and support electrical systems for industrial applications. You will be responsible for designing distribution systems, preparing drawings, selecting materials, and supporting manufacturing and installation processes, while ensuring compliance with engineering standards and safety codes.</p><p><strong>Responsibilities:</strong></p><ul><li>Design and layout electrical distribution systems for industrial plants</li><li>Prepare load schedules, single-line diagrams, and technical specifications</li><li>Create system models, perform simulations, and propose design improvements</li><li>Support material selection, vendor coordination, and technical decision-making</li><li>Generate detailed design documentation, reports, and test requirements</li><li>Assist in the manufacturing and installation of new electrical systems</li><li>Forecast electrical system costs and project budgets</li><li>Conduct field inspections, surveys, and ensure quality compliance</li><li>Review designs for code compliance and good engineering practices</li><li>Coordinate and lead electrical design activities across project phases</li><li>Analyze and resolve design and operational issues as they arise</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p><strong>Requirements:</strong></p><ul><li>Education: Bachelor s degree in electrical engineering or any related field</li><li>Experience: +5 years of experience</li><li>Languages : Professional in English</li><li>Strong knowledge of rotating and static electrical machines</li><li>Hands-on maintenance experience with industrial electrical equipment</li><li>Proficiency in creating and verifying engineering drawings</li><li>Familiarity with industry codes, standards, and best practices</li></ul><p><strong>Skills:</strong></p><ul><li>Electrical system design and load calculation expertise</li><li>Electrical distribution design for industrial environments</li><li>Strong drawing preparation and verification skills (AutoCAD or similar)</li><li>Knowledge of material selection and vendor coordination</li><li>Experience with electrical system modeling and simulations</li><li>Proficiency in interpreting and applying electrical codes and standards</li><li>Excellent troubleshooting, problem-solving, and decision-making abilities</li><li>Strong documentation and technical reporting skills</li><li>Team coordination and leadership in multi-discipline projects</li><li>Effective communication with vendors, engineers, and construction teams</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>In a world of possibilities, pursue one with endless opportunities. Imagine Next! At Parsons, you can imagine a career where you thrive, work with exceptional people, and be yourself. Guided by our leadership vision of valuing people, embracing agility, and fostering growth, we cultivate an innovative culture that empowers you to achieve your full potential. Unleash your talent and redefine what s possible. Job Description: Parsons is looking for an amazingly talented Senior Design Engineer (Water) to join our team. In this role, you will act as the main point of contact within the design team for technical issues related to water and irrigation networks . What You ll Be Doing: Design and plan primary and secondary pressurized networks. Act as the main point of contact within the design team for technical issues related to water/irrigation networks . Provide support for other engineering activities as required. Compute water demands and requirements. Develop efficient and cost-effective pressurized network designs that meet all requirements. Prepare site plans, design reports, specifications, and cost estimates. Review deliverables, including design reports, design submissions, and specifications.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Bachelor s Degree in engineering or a related field from an accredited University/Institute is required. Minimum 12 years of experience in the design of infrastructure mega projects, specifically irrigation network design . Excellent verbal and written communication skills in English. Experience advising clients on the best systems, materials, products, and sustainability approaches for irrigation systems. Strong computer/software skills in WaterGEMS, LandF/x, Microsoft Word, Excel, AutoCAD, Civil 3D, and Rain Cad (please confirm exact product spellings as used by the company).</p><p></p></section>

<h3 >About Asrar Architecture &amp; Engineering Consultants Group</h3> <p >Asrar Architecture &amp; Engineering Consultants Group is a consultancy firm dedicated to providing innovative, sustainable, and high-quality design and supervision services. The company offers comprehensive architectural and engineering solutions tailored to the evolving needs of the construction and infrastructure sectors. With a focus on client satisfaction, technical excellence, and timely project delivery, Asrar aims to exceed project expectations through its experienced professionals and a deep understanding of industry standards and best practices.</p> <h3 >The Senior Civil / Structural Design Engineer Role</h3> <p >Asrar Architecture &amp; Engineering Consultants Group is seeking a <strong>Senior Civil / Structural Design Engineer</strong> to join its team. This full-time, on-site role is based in Al Khobar, Eastern Region, and involves leading the design and analysis of civil and structural elements for various building and infrastructure projects. The position requires a professional committed to technical excellence and collaborative project delivery.</p> <h3 >Key Responsibilities</h3> <ul > <li >Prepare and review structural calculations, drawings, and technical reports, ensuring compliance with applicable codes, standards, and client specifications.</li> <li >Coordinate with architects, MEP engineers, and other stakeholders to integrate structural solutions into overall project designs, resolve technical issues, and support project delivery schedules.</li> <li >Oversee junior engineers and designers, including checking CAD and AutoCAD outputs.</li> <li >Participate in design reviews and provide guidance on construction methods and materials.</li> <li >Actively involve in quality assurance processes, risk assessments, and value engineering to support safe, efficient, and cost-effective project outcomes.</li> </ul> <h3 >Qualifications and Skills</h3> <ul > <li >0-1 years of experience in civil or structural design engineering.</li> <li >Familiarity with local and international building codes and standards, and experience in applying them to practical design solutions.</li> <li >Strong analytical, problem-solving, and decision-making abilities, with attention to detail and accuracy in calculations and documentation.</li> <li >Effective communication and collaboration skills, including the ability to guide junior team members and coordinate with multidisciplinary project teams.</li> <li >Professional registration or eligibility for registration (*, PE or equivalent) is considered an advantage.</li> </ul> <h3 >Work Environment and Location</h3> <p >This is a full-time, on-site position located in Al Khobar, Eastern Region. The role requires close collaboration with internal teams and external stakeholders within a dynamic consultancy environment focused on delivering high-quality engineering solutions for construction and infrastructure projects.</p> <h3 >Application Information</h3> <p >Candidates interested in the Senior Civil / Structural Design Engineer position are invited to apply. Salary for this role will be discussed during the interview process.</p>

<h3 >About the Role</h3> <p >KBR Saudi Arabia is seeking a <strong >Principal Structural Design Engineer - Offshore</strong> to join their team in Al Khobar. This full-time role involves leading the design, analysis, and integrity assessment of various offshore structures, ensuring compliance with industry standards and supporting projects through all phases.</p> <h3 >Role Overview</h3> <p >The Principal Structural Design Engineer will be responsible for overseeing the structural engineering aspects of offshore projects, including jackets, topsides, subsea structures, and floating systems. This position requires a strong understanding of Saudi Aramco Standards and international codes, along with the ability to supervise junior engineers and provide technical guidance across FEED, detailed design, installation, and decommissioning phases.</p> <h3 >Key Responsibilities</h3> <ul > <li >Lead structural design and advanced engineering analysis for offshore platforms and subsea systems.</li> <li >Perform global and local analyses, including in-place, loadout, lifting, fatigue, strength, buckling, and earthquake analysis.</li> <li >Review and approve structural calculations, drawings, and project documentation.</li> <li >Ensure engineering deliverables meet technical requirements, manhour budgets, and schedules.</li> <li >Coordinate with multidisciplinary teams, including piping, instrumentation, mechanical, electrical, architectural, pipelines, and geotechnical engineers.</li> <li >Provide technical support during fabrication, installation, and offshore construction activities.</li> <li >Develop and implement structural integrity management strategies for brownfield assets.</li> <li >Review Saudi Aramco standards and design codes (API RP 2A/2SIM, ISO 19900 series, DNV-GL standards) and ensure compliance.</li> <li >Mentor junior engineers and review their work.</li> <li >Perform single discipline checks on drawings and documents.</li> <li >Perform inter-discipline checks on drawings and documents.</li> </ul> <h3 >Qualifications and Experience</h3> <ul > <li >A minimum of <strong >10 years of experience</strong> in offshore structural engineering.</li> <li >Demonstrated experience in leading design, analysis, and integrity assessment of offshore structures.</li> <li >Proficiency in relevant industry codes and standards, including Saudi Aramco Standards, API RP 2A/2SIM, ISO 19900 series, and DNV-GL standards.</li> <li >Experience across various project phases: FEED, detailed design, installation, and decommissioning.</li> </ul> <h3 >Work Environment</h3> <p >This is a full-time position based in Al Khobar, Saudi Arabia, within a professional engineering environment focused on offshore structural design and analysis.</p> <h3 >Application Process</h3> <p >Candidates meeting the specified qualifications are encouraged to apply. Salary details will be discussed during the interview process.</p>