Swift وظائف - الجبيل السعودية

<h3 >About the Role</h3> <p >ENGIE Middle East is seeking a dedicated Shift Engineer to join our team in Al Jubail. This full-time role requires 5-10 years of experience and involves leading the operations shift team to ensure safe and efficient plant operations. The Shift Engineer will be responsible for making accurate and timely decisions regarding plant processes and performance, consulting with the Operations Manager as needed. The position demands a detailed understanding and practical experience with technologies used in modern process plants for power generation and desalinated water production.</p> <h3 >Operational Responsibilities</h3> <ul > <li >Provide focused leadership to the shift team to achieve plant performance targets and ensure optimum levels of power and water export as required by the off-taker.</li> <li >Coordinate effectively among the operations and maintenance teams for routine, preventive, and predictive maintenance requirements.</li> <li >Ensure operations shifts are adequately staffed and that necessary resources are available for the team to operate the Cogen plant safely, reliably, and efficiently.</li> <li >Monitor the quality and actions taken on defects and work orders.</li> <li >Continuously monitor and analyze equipment operating parameters to predict abnormal conditions early and initiate appropriate action to prevent unscheduled unit or equipment outages.</li> <li >Oversee chemical processes, sampling, and water plant control to maintain quality standards, environmental compliance, and safety.</li> <li >Raise work orders in the system to report plant defects and follow up on their progress.</li> <li >Coordinate with the Senior Shift Engineer and maintenance team to schedule planned and unplanned maintenance activities.</li> <li >Prepare and issue safety documentation to ensure safe isolations from the system for planned and unplanned maintenance activities.</li> <li >Coordinate and maintain strong liaison with Power, Gas, Sea Water &amp; Water Control Centers regarding Availability Declarations and Requirements Planning.</li> </ul> <h3 >Safety, Quality, and Environmental Compliance</h3> <ul > <li >Responsible for the Safety Management and Environment Management System where applicable.</li> <li >Ensure IMS Compliance and Certification.</li> <li >Implement and adhere to all operations-related policies and procedures.</li> <li >Prepare safety documents according to JOMEL safety rules standard and be conversant with the Permit to Work (PTW) system.</li> <li >Ensure all activities are carried out according to predefined Standard Operating Procedures (SOPs) and instructions.</li> <li >Ensure the shift team is aware of and trained on any revisions or updates to SOPs or instructions.</li> </ul> <h3 >Team Leadership and Development</h3> <ul > <li >Maintain high standards of management, ethics, and leadership within the team.</li> <li >Establish and facilitate training programs for individual development and operational competence.</li> <li >Lead the implementation of the performance management process by setting objectives and targets for individuals and conducting periodical reviews.</li> <li >Provide support to individuals in achieving set targets whenever necessary.</li> <li >Implement lessons learned processes and other activities to foster a learning organization culture.</li> <li >Ensure succession planning for key staff members.</li> <li >Establish and implement vertical and horizontal communication within the shift team to ensure members are well-informed and engaged with the business.</li> <li >Act as a subject matter expert in specialized areas of the plant and deliver training to staff when required.</li> </ul> <h3 >Qualifications and Experience</h3> <p >Candidates for the Shift Engineer position should possess 5-10 years of relevant experience. The role requires a detailed understanding and practical experience of technologies involved in operating modern process plants associated with power generation and the production of desalinated water. Essential skills include <strong >excellent communication and leadership abilities</strong>, along with the capacity to work under one's own initiative with a high level of drive, energy, and motivation.</p> <h3 >Reporting Structure and Accountabilities</h3> <p >The Shift Engineer operates under the general guidance of the Senior Shift Engineer and is empowered to plan and manage their areas of activity within predefined limits. Extraordinary issues outside established policy and procedure are to be referred to the Senior Shift Engineer for approval or further action plans. Key accountabilities for this role include:</p> <ul > <li >Ensuring smooth running of Shift Operations.</li> <li >Compliance with HSE (Audit &amp; Procedural Compliance).</li> <li >Adherence to ISO Standards (Audit &amp; Procedural Compliance).</li> <li >Achieving Plant Operations Targets.</li> <li >Maintaining the Quality of Reports and the Reporting System for all operations-related reports.</li> </ul>

<h3 >About the Role</h3> <p >ENGIE Middle East is seeking a <strong >Senior Shift Engineer</strong> for a full-time position in Al Jubayl, Saudi Arabia. This role is central to ensuring the safe and efficient operation of the plant by leading the entire operations shift team. The Senior Shift Engineer will be responsible for making accurate and timely decisions regarding plant processes and performance, consulting with the Operations Manager as needed. The position requires a detailed understanding and practical experience with technologies used in modern process plants for power generation and desalinated water production.</p> <h3 >Key Responsibilities</h3> <ul > <li >Provide leadership for the safe, reliable, and efficient operations of the plant.</li> <li >Ensure compliance with the Safety Management and Environment Management Systems, where applicable, and support IMS Compliance and Certification.</li> <li >Implement and ensure adherence to all operations-related policies and procedures.</li> <li >Coordinate effectively between the operations and maintenance teams.</li> <li >Ensure operations shifts are adequately staffed and required resources are available for the team to operate the plant safely, reliably, and efficiently.</li> <li >Coordinate with operations and maintenance teams regarding routine, preventive, and predictive maintenance requirements.</li> <li >Monitor the quality and actions taken on defects and work orders.</li> <li >Provide support to the maintenance team in organizing and executing crucial maintenance works, including analyzing and finding solutions for recurring problems.</li> <li >Set objectives for self and subordinates in line with departmental targets, perform periodical reviews, and provide guidance and mentoring for individual development.</li> <li >Ensure periodic reviews and updates of Standard Operating Procedures (SOPs) and instructions to maintain controlled and consistent work execution.</li> <li >Prepare the team's operational budget and track its expenditure.</li> <li >Provide operational inputs for the preparation of budgets for plant chemicals and Sea Water Requirements.</li> </ul> <h3 >Accountabilities</h3> <p >The Senior Shift Engineer is accountable for ensuring the smooth running of Shift Operations with compliance in the following areas:</p> <ul > <li >HSE (Audit &amp; Procedural Compliance)</li> <li >IMS (Audit &amp; Procedural Compliance)</li> <li >Plant Operations Targets</li> <li >Quality of Reports and Reporting System (all operations-related reports)</li> </ul> <h3 >Required Skills and Experience</h3> <ul > <li >5-10 years of practical experience in operating modern process plants associated with power generation and desalinated water production.</li> <li >Demonstrated excellent communication and leadership skills.</li> <li >Ability to work under own initiative with a high level of drive, energy, and motivation.</li> <li >Detailed understanding of relevant technologies.</li> </ul> <h3 >Business Unit and Legal Entity</h3> <p >This position is part of the <strong >GBU Renewables &amp; Flexible Power</strong> Business Unit and the <strong >GEN International - KSA</strong> Division. The legal entity for this role is <strong >JUBAIL O&amp;M COMPANY LIMITED</strong>.</p> <h3 >Application Information</h3> <p >This is a full-time position, and the salary will be disclosed during the application process. Qualified candidates are encouraged to apply.</p>

<h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">About the Role</h3> <p style="margin:0 0 12px; ************;">ENGIE Middle East is seeking a <strong style="font-weight:700;">Central Control Room Operator (CRO)</strong> to join their team in Al Jubayl, Saudi Arabia. This full-time role is responsible for overseeing plant operations from the control room, ensuring the facility consistently meets required availability, reliability, efficiency, generation, and cost targets, all while adhering to strict safety and environmental limits. The position requires 0-1 years of experience and a detailed understanding of modern Cogeneration, Gas Turbine, MED, and Desalination plant technologies, along with various auxiliary equipment.</p> <h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">Key Responsibilities</h3> <ul style="margin:0 0 12px; padding-inline-start:24px; list-style-type:disc; list-style-position:outside;"> <li style="margin:0 0 6px;">Ensure compliance with the Integrated Management System (IMS) and operate the plant within defined parameters for staff safety, legislative compliance, product quality, and environmental responsibility.</li> <li style="margin:0 0 6px;">Perform regular equipment start-ups, shut-downs, changeovers, and continuous operation/monitoring, responding to alarms and emergency conditions.</li> <li style="margin:0 0 6px;">Maintain optimum plant performance and the required level of power and water export as per the off-taker control center.</li> <li style="margin:0 0 6px;">Execute safe plant start-up and shut-down procedures to ensure the reliability of power and water plant equipment.</li> <li style="margin:0 0 6px;">Monitor and analyze plant performance parameters, performing necessary corrective actions to maintain safe and efficient running conditions.</li> <li style="margin:0 0 6px;">Plan and control changeover/shut-down of plant equipment for maintenance purposes.</li> <li style="margin:0 0 6px;">Direct and guide field operators on handling and operating plant equipment, and conduct routine plant test/changeover/maintenance activities.</li> <li style="margin:0 0 6px;">Raise incident/accident reports, participate in safety audits, toolbox talks, and safety walks.</li> </ul> <h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">Operational Coordination and Reporting</h3> <ul style="margin:0 0 12px; padding-inline-start:24px; list-style-type:disc; list-style-position:outside;"> <li style="margin:0 0 6px;">Raise work orders in the system for plant defects and follow up on their progress.</li> <li style="margin:0 0 6px;">Coordinate with the Shift Engineer and maintenance team to schedule planned and unplanned maintenance activities.</li> <li style="margin:0 0 6px;">Prepare and issue safety documentation to ensure safe isolations from the system for maintenance.</li> <li style="margin:0 0 6px;">Coordinate and maintain liaison with Power, Gas, Sea Water &amp; Water Control Centers regarding Availability Declarations &amp; Requirements Planning.</li> <li style="margin:0 0 6px;">Prepare comprehensive reports including Shift Reports, Trip Reports, Shift Production Control Room Logs, and other reports related to equipment operations.</li> <li style="margin:0 0 6px;">Assume a lead role in case of emergency in the absence of the Shift Engineer.</li> </ul> <h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">Accountabilities and Performance Indicators</h3> <p style="margin:0 0 12px; ************;">The CRO is accountable for strict compliance with operational procedures, ISO Standards, and safety protocols. Key performance indicators include the quality of safety audit reports, peer-to-peer reviews, and safety walk &amp; talk reports. The role demands effective performance of operational activities, successful and efficient start-ups and shutdowns, and safe plant operations during shifts. Additional accountabilities cover the quality of shift and other reports, work orders, proper planning for maintenance support, timely service requests, accurate declaration of Power &amp; Water availability, and effective liaison with control centers. The CRO must be conversant with ENGIE Safety Rules, capable of acting as a designated person, Issuer, and safety controller, and able to complete the skill matrix to work as an Acting Shift Engineer.</p> <h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">Qualifications and Experience</h3> <ul style="margin:0 0 12px; padding-inline-start:24px; list-style-type:disc; list-style-position:outside;"> <li style="margin:0 0 6px;">0-1 years of experience in a relevant field.</li> <li style="margin:0 0 6px;">Detailed understanding and practical experience with technologies associated with operating a modern Cogeneration plant, Gas Turbine Plant, MED, Desalination Plant, and a wide range of Auxiliary Equipment.</li> <li style="margin:0 0 6px;">Ability to complete the field operator PQR.</li> <li style="margin:0 0 6px;">Capability to work in the field when necessary.</li> </ul> <h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">Reporting Structure and Autonomy</h3> <p style="margin:0 0 12px; ************;">The Central Control Room Operator operates under the general guidance of the Shift Engineer. The job holder has the autonomy to plan and manage their areas of activity within predefined limits. Any extraordinary issues that arise outside of established policy and procedure are to be referred to the Senior Shift Engineer for approval of recommendations or solicitation of further action plans.</p>

<h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">About the Role</h3> <p style="margin:0 0 12px; ************;">ENGIE Middle East is seeking a <strong style="font-weight:700;">Field Operator</strong> to join our team in Al Jubayl, Saudi Arabia. This full-time role is central to ensuring the efficient and safe local operations of our plant, meeting critical targets for availability, reliability, efficiency, generation, and cost, all within strict environmental limits. The position requires a detailed understanding and practical experience with the technologies involved in operating a modern Gas Turbine Plant, Desalination plant, and a wide array of auxiliary equipment.</p> <h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">Key Responsibilities</h3> <ul style="margin:0 0 12px; padding-inline-start:24px; list-style-type:disc; list-style-position:outside;"> <li style="margin:0 0 6px;">Perform routine plant checks, including round-ups and completion of log sheets.</li> <li style="margin:0 0 6px;">Execute operational actions as directed by the CRO, such as valve operations, pump switching, and resetting local alarms, to prevent or correct plant abnormalities.</li> <li style="margin:0 0 6px;">Prepare the plant for start-ups, perform shutdowns, and manage extended shutdown preservation routines according to approved procedures.</li> <li style="margin:0 0 6px;">Conduct manual interventions during trip conditions and maintain close supervision to ensure safe plant rundown.</li> <li style="margin:0 0 6px;">Apply safety rules practically, performing safe plant isolations for maintenance and de-isolating equipment safely back into the system.</li> <li style="margin:0 0 6px;">Carry out routine maintenance activities such as lube oil top-ups, filter replacements, and site inspections.</li> <li style="margin:0 0 6px;">Support the CRO during emergency situations and assist maintenance personnel in pinpointing equipment defects.</li> <li style="margin:0 0 6px;">Raise service requests for defects in the system and coordinate with the Shift Engineer for approval.</li> <li style="margin:0 0 6px;">Manage plant chemicals, including changing over chemical tanks.</li> <li style="margin:0 0 6px;">Perform sample analysis of the plant process steam water cycle, Demin water, distillate, potable water, and other samples when a chemist is not on-site.</li> <li style="margin:0 0 6px;">Monitor and evaluate the performance of various plant systems and equipment.</li> <li style="margin:0 0 6px;">Maintain the safety and housekeeping of the plant.</li> <li style="margin:0 0 6px;">Complete the field operator’s skill matrix and act as CRO, taking charge of power and desal blocks as required.</li> </ul> <h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">Safety, Quality, and Environmental Compliance</h3> <p style="margin:0 0 12px; ************;">The Field Operator is responsible for ensuring compliance with the Integrated Management System (IMS) and performing all operational activities in line with the safety and environment management systems. This includes adhering to safety rules, monitoring ongoing maintenance jobs, and reporting unsafe conditions and behaviors. A key accountability is ensuring the export quality of potable water meets WHO guidelines and the standards set in the Agreement.</p> <h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">Reporting and Collaboration</h3> <p style="margin:0 0 12px; ************;">This role operates under the general guidance of the Central Room Operator (CRO). Daily communication regarding plant operational issues and defects is required with the CRO, Shift Engineer, and other team members. The Field Operator will coordinate with the CRO and Maintenance Staff for routine and emergency operational and maintenance activities, adhering to approved shift handover and communication protocols. Any extraordinary issues outside of established policies and procedures are to be referred to the CRO or Shift In charge for discussion and approval.</p> <h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">Accountabilities</h3> <ul style="margin:0 0 12px; padding-inline-start:24px; list-style-type:disc; list-style-position:outside;"> <li style="margin:0 0 6px;">Achieving Plant HSE objectives and goals.</li> <li style="margin:0 0 6px;">Compliance with corporate, safety, and environmental standards, as verified by audits.</li> <li style="margin:0 0 6px;">Reporting incidents and near misses, and performing safety walkdowns as per assigned KPIs.</li> <li style="margin:0 0 6px;">Quality of operations roundups, log sheets, data entry, and raised work orders.</li> <li style="margin:0 0 6px;">Maintenance of plant water chemistry, distillate, and potable water quality.</li> <li style="margin:0 0 6px;">Proper application of isolations and de-isolations according to safety documentation and other safety precautions.</li> <li style="margin:0 0 6px;">Efficient management of plant chemicals and effective planning of safe chemical tank changeovers.</li> <li style="margin:0 0 6px;">Compliance with potable water quality requirements.</li> <li style="margin:0 0 6px;">Training and development of On-Job Trainees (OJTs) and junior staff.</li> <li style="margin:0 0 6px;">Completion of the Operation’s skill matrix for personal development.</li> </ul> <h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">Qualifications and Experience</h3> <p style="margin:0 0 12px; ************;">Candidates should possess 0-1 year of relevant experience. The role requires a detailed understanding and practical experience with the technologies associated with operating a modern Gas Turbine Plant, Desalination plant, and a wide range of auxiliary equipment.</p>

<h3 >About the Role</h3> <p >S-Chem is seeking a <strong >Process Operator</strong> to join its team in Al Jubail, Eastern region. This full-time role involves operating and maintaining plant equipment to achieve production objectives safely and efficiently. The position requires 2-5 years of relevant experience.</p> <h3 >Job Purpose</h3> <p >The Process Operator is responsible for operating and maintaining plant equipment to meet company production objectives. This includes ensuring operations are conducted in a safe, cost-effective, and reliable manner, aligned with daily operating plans and quality standards.</p> <h3 >Key Responsibilities</h3> <ul > <li >Comply with EHS policies and procedures, applying risk control measures to ensure safe work activities.</li> <li >Ensure the safety of all personnel within the assigned work area, adhering to safety precautions and procedures.</li> <li >Operate plant equipment safely and correctly to achieve production and quality objectives.</li> <li >Assist with basic frontline maintenance, process sampling, and testing.</li> <li >Provide support for basic troubleshooting during all operational modes, including process upset conditions.</li> <li >Prepare process equipment and work areas for mechanical, maintenance, and turnaround activities.</li> <li >Monitor plant equipment performance and process conditions, taking routine readings of process variables.</li> <li >Follow Standard Operating Procedures for process operations.</li> <li >Maintain close communication with the shift leader and head operator regarding activities and status.</li> <li >Perform hazard identification and mitigation for effective and safe equipment preparation for maintenance handover.</li> <li >Follow up on and implement the weekly PM/CM maintenance schedule.</li> <li >Participate in Job Safety Analysis.</li> <li >Adhere to environmental, health, safety, and quality policies and procedures.</li> <li >Undertake accountabilities in the operational excellence process.</li> <li >Contribute to continuous improvement processes for the assigned area.</li> <li >Perform other relevant tasks as directed by the Shift Leader.</li> </ul> <h3 >Required Skills and Qualifications</h3> <ul > <li >2-5 years of experience in a relevant field.</li> <li >Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations.</li> <li >Ability to write reports, business correspondence, and procedure manuals.</li> <li >Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the public.</li> </ul> <h3 >Work Environment</h3> <p >This is a full-time position based in Al Jubail, within the Eastern region. The role involves working within a plant environment, requiring adherence to strict safety protocols and operational procedures.</p>

<h3 >About the Company and Role</h3> <p >Chevron Phillips Chemical Company, in partnership with Saudi Industrial Investment Group (SIIG) through Arabian Chevron Phillips Petrochemical Company (ACP), operates two 50/50 joint ventures in Al Jubayl, Saudi Arabia: Saudi Chevron Phillips Company (SCP) and Jubail Chevron Phillips Company (JCP). A third joint venture, Saudi Polymers Company (SPCo), is jointly owned by ACP and National Petrochemical Company (Petrochem). We are seeking a <strong >Process Operator</strong> to join our team in Al Jubayl.</p> <h3 >Job Purpose</h3> <p >The Process Operator is responsible for operating and maintaining plant equipment to achieve company production objectives. This full-time role emphasizes safe, cost-effective, and reliable operations, aligning with daily operating plans and quality standards.</p> <h3 >Key Responsibilities</h3> <ul > <li >Comply with all EHS policies and procedures, applying risk control measures to ensure safe work activities.</li> <li >Take responsibility for the safety of all personnel within the assigned work area, adhering to safety precautions, practices, and procedures.</li> <li >Review new procedures with the console operator to ensure safe methods are applied and take corrective action for unsafe acts.</li> <li >Operate plant equipment safely and correctly to achieve production objectives in line with operating plans and quality standards.</li> <li >Assist in basic frontline maintenance, process sampling, and testing.</li> <li >Support basic troubleshooting during all modes of operation, including process upset conditions.</li> <li >Assist in preparing process equipment and work areas for mechanical, maintenance, and turnaround activities.</li> <li >Monitor plant equipment performance and process conditions, including reading flow meters, temperature and pressure gauges, and taking routine readings on process variables.</li> <li >Follow Standard Operating Procedures for all process operations.</li> <li >Maintain close communication with the shift leader and head operator to ensure awareness of activities and status.</li> <li >Develop and utilize knowledge for hazard identification and mitigation to effectively and safely prepare equipment for handover to Maintenance.</li> <li >Follow up and implement the weekly PM/CM maintenance schedule.</li> <li >Participate in Job Safety Analysis.</li> <li >Adhere strictly to established environmental, health, safety, and quality policies and procedures.</li> <li >Undertake accountabilities in the operational excellence process as outlined in the schedule of responsibilities.</li> <li >Contribute to continuous improvement processes for the assigned area.</li> <li >Perform other relevant tasks as directed by the Shift Leader.</li> </ul> <h3 >Qualifications and Experience</h3> <ul > <li >Diploma degree required.</li> <li >A minimum of 2 years of experience in plant operations.</li> </ul> <h3 >Required Skills</h3> <ul > <li >Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations.</li> <li >Ability to write reports, business correspondence, and procedure manuals.</li> <li >Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the public.</li> </ul> <h3 >Company Context</h3> <p >S-Chem is recognized as a pioneer in developing the industrial foundation of the Kingdom of Saudi Arabia, particularly within the petrochemical industry. The company aims to lead private sector investment in this field.</p>

<h3><strong>About Air Products Qudra</strong></h3><p>At Air Products Qudra, we are driven by innovation and collective experience to create solutions that advance industries globally. We foster an environment where every voice is valued, contributing to groundbreaking achievements in various sectors, from supporting lifesaving care to enabling world-scale production facilities. We are seeking a <strong>Senior Process Engineer</strong> to join our team in Al Jubail, Saudi Arabia, on a full-time basis.</p><h3><strong>Role Purpose and Scope</strong></h3><p>The Senior Process Engineer – HYCO provides senior-level technical leadership for ongoing plant operations and projects, from concept development through commissioning and start-up. This role leads asset management and productivity initiatives across all BHIG operating facilities in the Middle East Region. Reporting to the BHIG Engineering Manager, the incumbent acts as a subject-matter expert (SME) on HYCO process technology, providing day-to-day operational and technical support to Regional Sites and mentoring junior process engineers.</p><h3><strong>Key Responsibilities</strong></h3><ul><li>Provide senior technical authority and subject-matter expertise for HYCO process engineering across the Region, including mentoring and peer review.</li><li>Lead and support regional teams for new installations, plant modifications, ongoing operations, and continuous improvement activities for various technologies including Air Separation Units (ASU), Hydrogen/Syngas (HYCO – SMR based), and CO2 production.</li><li>Ensure all activities comply with legal requirements, BHIG safety, and technical standards, providing technical support and safety leadership for process safety initiatives such as MOC, OPHR, PHA/HAZOP, and LOPA.</li><li>Drive asset performance, reduce operating costs, and increase plant throughput through troubleshooting, efficiency studies, process safety, equipment reliability, and advanced process control (APC).</li><li>Apply process statistics and data analytics to detect performance drift, quantify variability, prioritize improvement opportunities, and validate implemented changes.</li><li>Develop, maintain, and validate steady-state and dynamic process simulation models using Aspen Plus and associated tools for troubleshooting, benchmarking, and optimization.</li><li>Provide expert technical support on heterogeneous catalyst systems used in HYCO/Hydrogen plants, covering assessment, evaluation, management, and change-out strategies.</li><li>Facilitate operational excellence through continuous improvement in plant productivity, reliability, quality, and cost, leading improvements and deploying best practices.</li><li>Lead investigations and Root Cause Analyses (RCA) to identify and implement sustainable corrective and preventive actions.</li><li>Monitor plant production daily, driving asset performance to meet targets for profitability and customer satisfaction.</li></ul><h3><strong>Operational and Safety Accountabilities</strong></h3><ul><li>Provide process engineering support to operations for the safe and reliable operation of SMR-based HYCO and CO2 facilities, meeting customer expectations and contractual requirements.</li><li>Ensure adherence to BHIG standards and Air Products global best practices for EH&amp;S, productivity, reliability, quality, and customer service.</li><li>Offer technical guidance to commissioning teams, supporting start-up and troubleshooting activities, and participating in Operations team training.</li><li>Participate in developing the month-end close model and ensure alignment with commercial obligations for the BHIG Middle East Commercial Area.</li><li>Maintain close working relationships with engineering and maintenance personnel through a Plant Process Advisory model.</li><li>Support Process Intelligence Center (PIC) initiatives such as plant monitoring, troubleshooting, and simulation training.</li><li>Provide technical support for turnarounds, including catalyst inspection, sampling, change-out planning, and post-turnaround performance validation.</li><li>Provide and maintain a safe work environment, demonstrating visible safety leadership, and participating in safety-related meetings and programs.</li></ul><h3><strong>Qualifications and Experience</strong></h3><ul><li>A minimum of <strong>12 years of experience</strong> in process engineering, preferably within the HYCO, ASU, or CO2 production sectors.</li><li>Demonstrated expertise as a technical authority and subject-matter expert in HYCO process technology.</li><li>Proficiency in process simulation tools such as Aspen Plus and associated Aspen suite tools.</li><li>Experience with heterogeneous catalyst systems, including Hydrodesulfurization (HDS), ZnO sulfur absorbers, Pre-Reforming, Steam Methane Reforming (SMR), High-Temperature Shift (HTS), Low-Temperature Shift (LTS), and Methanation.</li><li>Strong background in process safety management (PSM) initiatives, including MOC, OPHR, PHA/HAZOP, and LOPA.</li><li>Proven ability to apply process statistics and data analytics for performance improvement.</li></ul><h3><strong>Work Environment and Collaboration</strong></h3><p>This full-time position involves close collaboration with Air Products global, regional, and local process/production engineers, Regional Operations team members, project and design engineering teams, and process safety specialists. The role is instrumental in driving consistency in operations across the Middle East Region and contributing to the continuous improvement of productivity, reliability, quality, process safety, and cost-effectiveness of the plants, utilizing BHIG and Air Products systems and methodologies.</p>

<h3 >HYCO Supervisor Role at Air Products Qudra</h3> <p >Air Products Qudra is seeking a dedicated and experienced <strong >HYCO Supervisor</strong> to join our team in Al Jubail. This full-time position involves overseeing the operations of critical industrial gas facilities, ensuring safe, reliable, and efficient production. The role requires a seasoned professional capable of leading operational teams and managing complex processes.</p> <h3 >Overview of Responsibilities</h3> <p >The HYCO Supervisor is accountable for managing and supervising operations staff, including Boardman, Lead Operators, and Field Operators. This role encompasses facilities featuring two HYCO Steam Methane Reformers, one Off-Gas PSA facility, and a Hydrogen Import Pipeline Facility. Key responsibilities include managing day-to-day shift operations, conducting daily customer production meetings, achieving operational targets, and collaborating with Maintenance and Engineering teams for site safety and reliability.</p> <h3 >Safety Leadership and Operational Compliance</h3> <ul > <li >Provide and maintain a safe work environment, demonstrating leadership in company and industry safe work processes to prevent injuries.</li> <li >Ensure the safety of all operations personnel by utilizing the APQ Basic Safety Practice program, which includes Safety Work Permits, LOTO, and Confined Space procedures.</li> <li >Facilitate planning, organizing, auditing, and follow-up to integrate Air Products' safety culture into APQ operations.</li> <li >Ensure all Environmental Regulatory requirements are met and maintain compliance with all Corrective Maintenance (CM) and Preventive Maintenance (PM) tasks.</li> <li >Execute daily tasks such as preparing and implementing safety work permits, LOTO, and completing operations preventative maintenance activities.</li> </ul> <h3 >Technical Oversight and Production Efficiency</h3> <ul > <li >Provide direction to staff for the HYCO Steam Methane Reformer unit and ancillary equipment as prescribed by Work Instruction Procedures, operating the unit when required.</li> <li >Offer guidance based on technical feedback from the Assistant Site Manager, Site Manager, Engineering, and Maintenance for troubleshooting, maintenance, repair, and test activities.</li> <li >Provide Operations support, guidance, and lead the team during plant startups, shutdowns, and emergencies.</li> <li >Manage plant production efficiently based on data-driven decisions to meet safety and reliability targets and achieve maximum profitability.</li> <li >Work closely with the Shift Team, Assistant Site Manager, Site Manager, Maintenance Team, and Engineering team to ensure production targets are met and the plant operates at optimum energy efficiency and safety.</li> <li >Provide Operations input for scheduled outages to ensure contractual requirements are achieved.</li> </ul> <h3 >Team Development and Stakeholder Collaboration</h3> <ul > <li >Ensure Operations staff is properly trained to support operations, developing and promoting top-performing personnel who are customer and employee focused.</li> <li >Provide coaching and motivation to the operations team to achieve operational excellence and customer satisfaction.</li> <li >Establish and maintain close working relationships with engineering and maintenance personnel to continuously monitor and evaluate plant systems and equipment.</li> <li >Act as the Single Point of Contact for internal HYCO unit issues, representing APQ and coordinating internal resources.</li> <li >Maintain relationships with customer counterparts from other Refinery Units to ensure alignment of expectations for product demand.</li> <li >Provide timely progress updates to the customer and facilitate attainment of operations excellence and customer satisfaction.</li> </ul> <h3 >Required Qualifications and Experience</h3> <p >Candidates for the HYCO Supervisor position must possess a minimum of <strong >10 years of experience</strong> in a relevant operational or supervisory role within industrial gas or chemical processing facilities. This full-time role is based in Al Jubail and requires a strong commitment to safety, operational excellence, and team leadership.</p>

<h3 >About the Role</h3> <p >Eram Talent is seeking a highly experienced and safety-conscious <strong >Commissioning &amp; Start-Up (CSU) Lead</strong> for Steam Methane Reformer (SMR) Hydrogen plants. This contract position is based in Al Jubayl, Saudi Arabia, and involves overseeing the successful transition of SMR hydrogen production assets from the construction phase to commercial operation. The CSU Lead will provide technical and operational leadership, managing interfaces between engineering, construction, and operations to ensure all plant systems are safely commissioned, tested, and fully functional according to project specifications and industry standards.</p> <h3 >Key Responsibilities</h3> <ul > <li >Provide technical and operational leadership for the site commissioning team.</li> <li >Develop and implement the Commissioning Execution Plan, including scheduling, resource mobilization, and budget management.</li> <li >Lead the end-to-end commissioning of SMR units, including the reformer furnace, shift converters, PSA purification systems, compressors, steam systems, and balance-of-plant (BOP) utilities.</li> <li >Enforce rigorous safety protocols such as Permit-to-Work, LOTO, and HAZOP/HAZID compliance throughout the construction, commissioning, and startup phases.</li> <li >Manage pre-commissioning activities, including mechanical completion walkdowns, piping system flushing/cleaning, leak testing, instrumentation loop checks, and control system (DCS/PLC) functional validation.</li> <li >Direct the first-time introduction of feedstocks and gases, manage the ramp-up process, and conduct performance test runs to verify plant efficiency and production targets.</li> <li >Ensure all commissioning documentation, including test reports, punch lists, as-built records, and handover dossiers, is accurate and complete.</li> <li >Facilitate the formal turnover of the facility to the Operations team.</li> <li >Act as the primary liaison between project engineering, EPC contractors, vendors/OEMs, and the client/owner's operations team to resolve technical issues and punch list items.</li> </ul> <h3 >Qualifications and Experience</h3> <ul > <li >Bachelor's degree in Chemical, Mechanical, or Process Engineering.</li> <li >Minimum of <strong >10+ years</strong> of experience in the oil, gas, or chemical industry.</li> <li >At least <strong >5 years</strong> specifically in a lead capacity for the commissioning and startup of SMR Hydrogen plants.</li> </ul> <h3 >Required Skills and Technical Expertise</h3> <ul > <li >Deep understanding of SMR process chemistry, thermodynamics, and high-temperature furnace operations.</li> <li >Expertise in hydrogen safety, high-pressure gas systems, and PSA unit operations.</li> <li >Proficiency in interpreting complex P&amp;IDs, control logic, and loop diagrams.</li> <li >Proven track record of managing multi-disciplinary site teams and coordinating effectively with contractors and subcontractors.</li> <li >Strong analytical skills for root cause analysis (RCA) during technical troubleshooting of complex process issues.</li> <li >Excellent verbal and written communication skills for reporting progress to stakeholders and training operational personnel.</li> </ul> <h3 >Preferred Qualifications</h3> <ul > <li >Experience with other hydrogen technologies, such as electrolysis or carbon capture integration.</li> <li >Certification in Project Management (PMP) or relevant industry health and safety certifications.</li> <li >Experience in both greenfield and brownfield project environments.</li> </ul> <h3 >Working Conditions</h3> <ul > <li >This is a field-based role requiring 100% site presence.</li> <li >Willingness to work at construction sites, which may include remote or international locations.</li> <li >Flexibility to work extended hours, weekends, or shifts during critical startup milestones is required.</li> </ul>

<h3 >About Tasnee and the Role</h3> <p >Tasnee (National Industrialization Co.) is seeking a <strong >Sr Planner IV, TAM planning</strong>, for a full-time position located in Al Jubail, KSA. This role is integral to the efficient execution of major Turnaround maintenance activities within the company's operations.</p> <h3 >Role Overview</h3> <p >The Sr Planner IV, TAM planning, is responsible for the comprehensive planning and preparation of major Turnaround (TAM) maintenance activities. This involves managing the entire lifecycle from initial scope definition through to project closeout, ensuring meticulous organization and adherence to operational standards.</p> <h3 >Key Responsibilities</h3> <ul > <li >Extract TAM priority work orders from SAP, compile a Work List, and facilitate review with the TAM core group.</li> <li >Develop and approve the initial scope, managing and presenting any scope changes or additions.</li> <li >Collaborate with the Maintenance Supervisor to prepare detailed contractor scopes and initiate Purchase Requisitions (PRs).</li> <li >Create and route job packages for review and approval processes.</li> <li >Utilize Primavera to develop, monitor, and manage Pre-TAM and Execution schedules, including decommissioning and commissioning phases.</li> <li >Conduct schedule review meetings, finalize the schedule, and ensure its publication at least four months prior to execution.</li> <li >Incorporate additional jobs before baseline, issue look-ahead schedules, and track Key Performance Indicators (KPIs) and overall progress.</li> <li >Monitor compliance of P–P duration and report any deviations on a monthly basis.</li> <li >Provide daily status reports, facilitate shift-based meetings, and recommend corrective actions.</li> <li >Ensure proper closeout of TAM activities, including confirming Technical Completion (TECO), archiving feedback, and managing material returns.</li> <li >Arrange for the refurbishment of spare components and equipment.</li> <li >Schedule and facilitate TAM critique meetings post-commissioning, compiling all observations.</li> <li >Prepare the final TAM Closeout Report, detailing inspection results and major achievements.</li> <li >Comply with all company safety procedures and regulations.</li> </ul> <h3 >Qualifications and Experience</h3> <ul > <li >Bachelor's degree in Mechanical Engineering.</li> <li >A minimum of <strong >5 years of experience</strong> in the maintenance field.</li> </ul> <h3 >Work Environment</h3> <p >This is a full-time position based in <strong >Al Jubail, KSA</strong>, requiring dedicated on-site presence to manage critical turnaround planning activities.</p> <h3 >Application</h3> <p >If you meet the qualifications and are ready to contribute to a leading industrial company, we encourage you to apply.</p>

<h3 >About the Role</h3> <p >TXM Solutions is seeking a dedicated and experienced <strong >Fleet Incharge</strong> to join our team in Jubail, Eastern, Saudi Arabia. This full-time role requires 5-10 years of experience in fleet management, focusing on optimizing operations, ensuring compliance, and managing a large team of drivers. The Fleet Incharge will be responsible for the efficient and safe operation of our heavy vehicle fleet, contributing to overall operational excellence and cost control.</p> <h3 >Key Responsibilities</h3> <ul > <li >Manage the daily deployment and scheduling of heavy vehicles to maximize fleet utilization.</li> <li >Assign transport requests to drivers based on location, cargo type, availability, and working hours.</li> <li >Optimize vehicle routing to minimize empty kilometers and enhance operational efficiency.</li> <li >Monitor fleet movements in real-time using GPS tracking systems such as <strong >Wialon, Geotab, and WhatsGPS</strong>.</li> <li >Respond promptly to operational disruptions including breakdowns, delays, road closures, and checkpoint issues.</li> <li >Ensure transport services consistently meet project schedules and customer requirements.</li> </ul> <h3 >Fleet Performance and Cost Control</h3> <ul > <li >Monitor daily fuel consumption using <strong >FLS fuel monitoring systems</strong> and investigate any fuel deviations.</li> <li >Analyze operational data to improve fuel efficiency and reduce overall transportation costs.</li> <li >Track key metrics including fleet utilization, cost per kilometer, idle time, and empty mileage.</li> <li >Coordinate preventive maintenance schedules based on mileage and manufacturer recommendations.</li> <li >Monitor tire performance, oil changes, filters, and other maintenance requirements to minimize unplanned downtime.</li> <li >Collaborate closely with maintenance teams to ensure vehicle availability and reliability.</li> </ul> <h3 >Driver Management and Safety</h3> <ul > <li >Supervise a large team of drivers, ensuring sufficient manpower coverage across all operations.</li> <li >Prepare driver rosters, shift schedules, and leave plans to maintain uninterrupted fleet operations.</li> <li >Monitor driver productivity and evaluate performance against established key performance indicators.</li> <li >Conduct driver inductions and training on company policies, fleet tracking systems, safe driving practices, eco-driving techniques, and regulatory compliance.</li> <li >Investigate traffic violations, accidents, and incidents, implementing corrective and preventive actions.</li> <li >Ensure compliance with company HSE policies and transportation regulations, including TGA working and rest-hour regulations.</li> <li >Promote a strong safety culture among drivers and fleet personnel, ensuring safe cargo transport and protection of company assets and customer property.</li> </ul> <h3 >Compliance, Documentation, and Reporting</h3> <ul > <li >Ensure all fleet documentation remains valid, including vehicle registrations, insurance, MVPI certificates, operating cards, and driver licenses.</li> <li >Generate transport documentation through the <strong >Naql Platform</strong> and monitor cargo manifests using the <strong >Bayan System</strong>.</li> <li >Maintain accurate records for fuel invoices, maintenance records, weighbridge tickets, and fleet operational reports.</li> <li >Prepare weekly and monthly operational reports covering fleet performance, utilization, costs, maintenance, and operational issues.</li> <li >Monitor and report on fleet performance against established KPIs such as Fleet Utilization Rate, Average Fuel Consumption, Cost per Kilometer, On-Time Delivery Performance, Empty Kilometer Percentage, Preventive Maintenance Compliance, Vehicle Downtime, Driver Safety Performance, Accident &amp; Traffic Violation Rate (with a target of Zero Major Accidents), Driver Productivity, and Operational Cost Reduction.</li> <li >Analyze operational trends and recommend improvements to increase productivity and reduce operating costs.</li> <li >Prepare management reports on fleet utilization, fuel efficiency, on-time delivery, maintenance performance, driver performance, and cost analysis.</li> </ul> <h3 >Qualifications and Experience</h3> <ul > <li >A minimum of <strong >5-10 years of experience</strong> in fleet management, preferably with heavy vehicles.</li> <li >Demonstrated experience with GPS tracking systems like <strong >Wialon, Geotab, and WhatsGPS</strong>.</li> <li >Proficiency in using fuel monitoring systems such as <strong >FLS</strong>.</li> <li >Familiarity with the <strong >Naql Platform</strong> for transport documentation and the <strong >Bayan System</strong> for cargo manifests.</li> <li >Strong leadership and team management skills, particularly in supervising a large driver workforce.</li> <li >Excellent analytical abilities for performance monitoring, cost control, and trend analysis.</li> <li >Thorough understanding of transportation regulations, HSE policies, and compliance requirements.</li> </ul>

<h3 >About eXtra (United Electronics Co.)</h3> <p >eXtra (United Electronics Co.) is a leading retailer committed to providing a comprehensive shopping experience. The company focuses on delivering value and service to its customers across various locations.</p> <h3 >The Role of Sales Consultant</h3> <p >eXtra is seeking customer-focused and motivated individuals to join its store team as a <strong >Sales Consultant</strong>. This full-time position is based in Al Jubail, within the Eastern region, and is integral to supporting the store's sales and customer service objectives.</p> <h3 >Key Responsibilities</h3> <ul > <li >Deliver an exceptional customer experience and provide professional sales support.</li> <li >Assist customers in selecting products and services that best meet their specific needs.</li> <li >Achieve personal and store sales targets while contributing to overall store performance.</li> <li >Maintain product displays, ensure pricing accuracy, and uphold store presentation standards.</li> <li >Support inventory management activities, including stock replenishment and cycle counts.</li> <li >Participate in promotional campaigns and seasonal sales activities as required.</li> <li >Adhere to all company policies, operational procedures, and safety standards.</li> </ul> <h3 >Required Qualifications and Experience</h3> <ul > <li >High School diploma or equivalent is required; a Diploma or Bachelor’s degree is preferred.</li> <li >0–2 years of experience in retail sales or customer service is essential for this role.</li> </ul> <h3 >Essential Skills and Attributes</h3> <ul > <li >Basic knowledge of computer systems and Point of Sale (POS) systems.</li> <li >Demonstrated passion for sales and providing excellent customer service.</li> <li >Flexibility to work various shifts, including weekends and during peak seasons.</li> </ul> <h3 >Commitment to the Role</h3> <p >This full-time position requires a commitment to contributing to a dynamic retail environment. Candidates should be prepared to engage actively with customers and support store operations effectively.</p>

<h3 >About the Role</h3> <p >FNRCO is seeking a <strong >Security Guard</strong> to join their team in Al Jubail, Eastern Region. This full-time position involves maintaining the safety and security of a villa compound, its residents, visitors, and assets. The role requires 0-1 years of experience in security operations.</p> <h3 >Role Summary</h3> <p >The Security Guard is responsible for ensuring a secure environment within the villa compound. This includes monitoring access points, conducting regular patrols, and responding effectively to security incidents and emergencies to protect the premises and its occupants.</p> <h3 >Key Responsibilities</h3> <ul > <li >Monitor and control entry and exit points of the compound.</li> <li >Verify visitor identities and maintain accurate visitor logs.</li> <li >Conduct regular patrols of the premises to ensure security and safety.</li> <li >Report security incidents, potential hazards, and suspicious activities promptly.</li> <li >Respond to emergencies and security concerns in a timely manner.</li> <li >Monitor CCTV systems and other security equipment as applicable.</li> <li >Enforce compound security policies and established procedures.</li> <li >Assist residents, staff, and visitors with security-related inquiries.</li> <li >Prepare daily security reports and detailed incident records.</li> </ul> <h3 >Qualifications and Requirements</h3> <ul > <li >Must be a Saudi Arabian national.</li> <li >High school diploma or equivalent educational qualification.</li> <li >Previous security experience is preferred.</li> <li >Basic communication skills in Arabic are required; English language proficiency is an advantage.</li> <li >Ability to work rotating shifts, including nights, weekends, and holidays.</li> <li >Physically fit and capable of performing patrol duties across the premises.</li> <li >Good observation and problem-solving skills.</li> </ul> <h3 >Preferred Skills</h3> <ul > <li >Knowledge of security and emergency response procedures.</li> <li >Experience in residential compounds, facilities management, or construction projects.</li> <li >Familiarity with CCTV and access control systems.</li> </ul> <h3 >Application Process</h3> <p >Interested candidates who meet the qualifications are encouraged to apply for this full-time Security Guard position with FNRCO in Al Jubail.</p>

<h3 >Role Overview</h3> <p >ENGIE Middle East is seeking an <strong >Electrical Technician</strong> to join its team in Al Jubayl, Saudi Arabia. This full-time role is crucial for ensuring the safe, reliable, and efficient operation of electrical assets within the Combined Cycle Power Plant (CCPP) and Desalination Plant. The Electrical Technician will primarily focus on performing preventive, predictive, and corrective maintenance, alongside troubleshooting and testing of all electrical equipment and systems to support uninterrupted power and water production.</p> <h3 >Key Responsibilities</h3> <ul > <li >Ensure full compliance with the Integrated Management System (IMS) standards.</li> <li >Organize necessary spares, tools, and equipment for maintenance activities.</li> <li >Execute preventive and corrective maintenance on major electrical systems, adhering to OEM manuals and industry best practices.</li> <li >Perform independent troubleshooting to identify failure conditions and rectify defects.</li> <li >Collaborate with Plant Operations Personnel to resolve issues with control equipment, under the guidance of the Electrical Foreman/Engineer.</li> <li >Carry out assigned duties with minimal supervision.</li> <li >Maintain a safe working environment for self and colleagues during all equipment operations.</li> <li >Record and report all Preventive Maintenance (PM) and Corrective Maintenance (CM) jobs to the Foreman.</li> <li >Adhere strictly to company rules and procedures.</li> <li >Obtain all required permit authorizations for work on electrical systems.</li> <li >Participate in safety meetings, toolbox talks, and incident investigations.</li> <li >Update the Computerized Maintenance Management System (CMMS) after each activity.</li> <li >Engage in technical training and continuous development programs.</li> </ul> <h3 >Required Qualifications and Experience</h3> <ul > <li >0-1 years of practical experience in maintaining electrical equipment, gained through hands-on work and formal training.</li> <li >Practical knowledge of plant isolations from system hazards.</li> <li >Sufficient knowledge of health &amp; safety regulations and safe working practices.</li> <li >Proficiency in computer applications, including SAP and MS Office.</li> <li >Good command of the English Language.</li> </ul> <h3 >Essential Requirements</h3> <ul > <li >Ability to support 24-hour operations by being available for call-out at short notice when required.</li> <li >Possession of a valid Saudi driving license is mandatory.</li> <li >Residency in Al Jubail is preferred to ensure quick access to the plant in emergency situations.</li> </ul> <h3 >Physical and Operational Demands</h3> <p >The Electrical Technician role operates in demanding environments, requiring strong physical and mental resilience. Candidates must meet the following criteria:</p> <ul > <li >Medically fit to work in power plant conditions, including exposure to high voltage, heat, noise, and confined spaces.</li> <li >Possess adequate strength and stamina for prolonged periods of standing, walking, and climbing during inspections and supervision.</li> <li >Capable of working at heights and in elevated areas, such as scaffolds and overhead cranes.</li> <li >Able to lift and handle electrical tools and equipment weighing up to 20–25 kg.</li> <li >Maintain good vision (with corrective lenses if necessary) and hearing for monitoring electrical systems and alarms safely.</li> <li >Exhibit strong hand-eye coordination and dexterity for handling electrical components.</li> <li >Capable of prompt physical response in emergency or fault conditions, including rapid movement to safe locations.</li> <li >Tolerate rotating shifts, extended working hours, emergency callouts, and physically demanding schedules as dictated by plant operational needs.</li> <li >Free from medical conditions that could impair alertness, balance, or safe performance of electrical supervision duties.</li> </ul> <h3 >Work Environment and Expectations</h3> <p >The Electrical Technician will work collaboratively with other Electrical Technicians to ensure plant routines are executed efficiently and to high-quality standards. This role emphasizes adherence to company procedures, active participation in safety initiatives, and a commitment to continuous professional development.</p>

<h3 >About the Role</h3> <p >ENGIE Middle East is seeking an <strong >Electrical Technician</strong> to join our team in Al Jubayl, Saudi Arabia. This full-time role involves performing preventive, predictive, and corrective maintenance, along with troubleshooting and testing of all electrical equipment and systems within our Combined Cycle Power Plant (CCPP) and Desalination Plant. The primary objective is to ensure the safe, reliable, and efficient operation of electrical assets, thereby supporting uninterrupted power and water production. Candidates should possess 0-1 years of relevant experience and will work closely with other Electrical Technicians to maintain high quality standards.</p> <h3 >Key Responsibilities</h3> <ul > <li >Ensure strict compliance with the Integrated Management System (IMS).</li> <li >Apply practical experience in the maintenance of electrical equipment, utilizing hands-on skills and formal training.</li> <li >Organize and manage spares, tools, and equipment necessary for maintenance activities.</li> <li >Execute preventive and corrective maintenance on major electrical systems in accordance with OEM manuals and industrial best practices.</li> <li >Conduct independent troubleshooting to identify failure conditions and rectify defects efficiently.</li> <li >Collaborate with Plant Operations Personnel to resolve issues related to control equipment, under the guidance of the Electrical Foreman/Engineer.</li> <li >Perform assigned duties with minimum supervision.</li> <li >Possess practical knowledge of plant isolations to mitigate system hazards.</li> <li >Maintain comprehensive knowledge of health and safety regulations and safe working practices.</li> <li >Contribute to the department's continuous improvement in safety culture and ensure a safe working environment for self and colleagues.</li> <li >Accurately record and report all undertaken preventive and corrective maintenance jobs to the Foreman.</li> <li >Adhere to all company rules and operational procedures.</li> <li >Obtain all necessary permit authorizations for work on Electrical Systems.</li> <li >Actively participate in safety meetings, toolbox talks, and incident investigations.</li> <li >Update the Computerized Maintenance Management System (CMMS) following the completion of every activity.</li> <li >Engage in technical training and continuous professional development programs.</li> </ul> <h3 >Essential Skills and Qualifications</h3> <ul > <li >Demonstrated practical experience in maintaining electrical equipment, ideally within a power or desalination plant environment.</li> <li >Proven ability to troubleshoot electrical systems and rectify defects independently.</li> <li >Familiarity with plant isolation procedures and system hazards.</li> <li >Strong understanding and adherence to health, safety, and environmental (HSE) regulations and safe working practices.</li> <li >Capability to follow OEM manuals and industrial best practices for maintenance activities.</li> <li >Proficiency in updating and utilizing Computerized Maintenance Management Systems (CMMS).</li> </ul> <h3 >Physical Demands and Work Environment</h3> <p >The Electrical Technician role operates within demanding power plant conditions and requires significant physical and mental resilience. Candidates must meet the following criteria:</p> <ul > <li >Be medically fit to work in environments with exposure to high voltage, heat, noise, and confined spaces.</li> <li >Possess sufficient strength and stamina for extended periods of standing, walking, and climbing during inspections and supervision.</li> <li >Be capable of working at heights and in elevated areas, including on scaffolds and with overhead cranes.</li> <li >Have the ability to lift and handle electrical tools and equipment weighing up to 20–25 kg.</li> <li >Maintain good vision (with corrective lenses if required) and hearing to safely monitor electrical systems and alarms.</li> <li >Exhibit strong hand-eye coordination and dexterity for precise handling of electrical components.</li> <li >Be able to respond promptly and physically in emergency or fault conditions, including rapid movement to safe locations.</li> <li >Tolerate rotating shifts, extended working hours, emergency callouts, and physically demanding schedules as dictated by plant operational needs.</li> <li >Be free from medical conditions that may impair alertness, balance, or the safe performance of electrical supervision duties.</li> </ul> <h3 >Preferred Qualification</h3> <ul > <li >Residency in the city of Jubail is preferred to ensure quick accessibility to the plant in case of emergencies.</li> </ul> <h3 >About ENGIE Middle East</h3> <p >ENGIE Middle East is a leading energy and services group committed to accelerating the transition to a carbon-neutral world. We provide a wide range of solutions across power generation, natural gas, and energy services. We foster a culture of safety, operational excellence, and continuous development for our employees.</p>

<h3 >About the Role</h3> <p >ENGIE Middle East is seeking an <strong >Electrical Engineer</strong> for a full-time position in Al Jubail. This role requires 5-10 years of experience and involves supervising a team of maintenance foremen, technicians, and support staff. The primary objective is to manage day-to-day electrical maintenance activities at a power and desalination plant. The Electrical Engineer will also support the management of major plant outages, including those under a gas turbine long-term service agreement, to ensure the plant consistently meets critical targets for safety, environmental compliance, availability, reliability, efficiency, and budget.</p> <h3 >Key Responsibilities</h3> <ul > <li >Ensure compliance with IMS and maintain a safe working environment for all personnel and contractors, including obtaining Permits to Work and adhering to Method Statements, Work Instructions, and Procedures.</li> <li >Plan, execute, and oversee preventive, predictive, and corrective maintenance, as well as project execution and upgrades for electrical systems and equipment.</li> <li >Ensure maintenance tasks are completed as per Work Orders generated in CMMS, with all work documented accurately.</li> <li >Produce necessary reports on maintenance activities and review/analyze maintenance reports and test results to recommend improvements.</li> <li >Ensure maintenance of all electrical equipment is in accordance with OEM manuals and best practices, collaborating with the Section Head Electrical for correct scheduling.</li> <li >Support 24-hour plant operation by being available for call-out at short notice, performing troubleshooting, rectifying defects, and conducting Root Cause Analysis of failures.</li> <li >Discuss planned and unplanned jobs with the Section Head-Electrical, and assist in outage planning, execution, and budget preparation processes.</li> <li >Ensure adequate inventories of spares and consumables are maintained, place requisitions, and ensure necessary tools and equipment are available, certified, and in good working condition.</li> <li >Deliver technical advice to colleagues and contractors, apply engineering knowledge to review and update task lists, and implement initiatives to address CMMS inconsistencies.</li> <li >Coach electrical technicians on equipment, Safe Work Procedures, and Operational Techniques, and support the development of Saudi Nationals through technical training and mentorship.</li> </ul> <h3 >Collaboration and Reporting Structure</h3> <p >The Electrical Engineer operates under the general guidance of the Section Head-Electrical for routine plant operations and team management. The role allows for planning and managing own areas of activity within established policy and procedural boundaries. Any extraordinary issues outside these guidelines will be referred to the Maintenance Manager or Section Head-Electrical for discussion and approval of recommended actions. Internal communications involve daily interactions with the Section Head-Electrical, Operations, and Maintenance teams, as well as regular discussions with the maintenance team regarding maintenance strategy, technical problems, and individual development needs. External interactions include communication with suppliers and service contractors.</p> <h3 >Required Qualifications and Experience</h3> <ul > <li >A minimum of 5-10 years of relevant experience in electrical engineering, preferably within a power and desalination plant environment.</li> <li >Possession of a valid driving license, or the ability to attain one before the end of the probation period.</li> </ul> <h3 >Physical and Environmental Demands</h3> <p >This role requires strong physical and mental resilience, involving work in power plant conditions. Candidates must be medically fit to operate in environments with exposure to high voltage, heat, noise, and confined spaces. The position demands sufficient strength and stamina for extended periods of standing, walking, and climbing during inspections and supervision, as well as the ability to work at heights and in elevated areas. Good vision (with corrective lenses if needed) and hearing are essential for monitoring electrical systems and alarms. Strong hand-eye coordination and dexterity are necessary for handling electrical components. The ability to respond promptly and physically in emergency or fault conditions, including rapid movement, is crucial. Candidates must also tolerate rotating shifts, extended working hours, emergency callouts, and physically demanding schedules as per plant operational needs, and be free from medical conditions that could impair alertness, balance, or safe performance of duties.</p> <h3 >Application Process</h3> <p >Interested candidates are invited to apply for this full-time Electrical Engineer position with ENGIE Middle East in Al Jubail.</p>

<div dir="ltr"><h3>About the Role</h3><p>Stacked Foundation is looking for a <strong>Cashier</strong> to join its team in Jubail, Eastern Province. The person in this role is responsible for managing cash and credit transactions, ensuring the accuracy of financial reconciliations, and providing excellent customer service. This is a full-time position requiring between two and five years of experience in a related field.</p><h3>Key Duties and Responsibilities</h3><ul><li>Counting money and recording it in the cash register at the start of the shift, ensuring a sufficient supply of small denominations.</li><li>Accepting payments by cash, credit card, or other approved methods, providing change, and issuing appropriate receipts.</li><li>Continuously updating price lists, calculating prices for goods or services, preparing billing schedules, and applying discounts when necessary.</li><li>Reconciling cash received with total sales at the end of the shift and reporting or resolving any discrepancies.</li><li>Interacting professionally with customers and fulfilling their requests for additions or removals from their shopping lists.</li></ul><h3>Required Qualifications and Experience</h3><ul><li>Practical experience ranging from <strong>two to five years</strong> in a cashier role or equivalent.</li><li>Ability to handle cash and credit transactions accurately and efficiently.</li><li>Good customer service and effective communication skills.</li><li>Ability to work within a team and in a fast-paced environment.</li></ul><h3>Work Environment</h3><p>The cashier works full-time in Jubail, Eastern Province. The role requires direct interaction with customers and the management of daily financial operations in a dynamic environment.</p><h3>Additional Information</h3><p>The salary for this role is not disclosed and will be determined based on experience and qualifications.</p><h3>Application</h3><p>We invite interested candidates who meet the above requirements to submit their applications for consideration.</p></div>

<div dir="rtl"><h3 >About the Role</h3> <p >Castle of Rice restaurant, seeking an <strong >Accounting Cashier</strong> to join its team in Al Jubail, Eastern Province. The holder of this full-time position will be responsible for managing daily financial transactions, including receiving cash and card payments, ensuring accuracy of sales records, and delivering excellent customer service torestaurant patrons.</p> <h3 >Key Responsibilities</h3> <ul > <li >Count and record cash at the start of each shift, ensuring an adequate amount of small denominations is available.</li> <li >Accept cash or credit card payments or other approved methods, settle remaining amounts, and issue necessary receipts.</li> <li >Regularly update price lists, calculate prices of goods or services, prepare billing tables, and apply discounts when necessary.</li> <li >Reconcile cash received with total sales at the end of the shift, and report any discrepancies or resolve them according to procedures.</li> <li >Interact with customers warmly and fulfill requests related to adding or removing items from the purchase lists.</li> </ul> <h3 >Experience Required</h3> <ul > <li >This position requires practical experience ranging from <strong >two to five years</strong> in a related field, preferably in the restaurant or retail sector, with a proven track record in handling financial operations.</li> </ul> <h3 >Skills and Competencies</h3> <ul > <li >High accuracy in handling and recording cash and financial transactions.</li> <li >Excellent customer service, effective communication, and courteous interaction skills.</li> <li >Ability to work under pressure and manage time effectively during peak periods.</li> <li >Compliance with specified financial instructions, procedures, and restaurant policies.</li> </ul> <h3 >Job Details</h3> <p >This is a full-time position at Castle of Rice Restaurant in Al Jubail, Eastern Province. The role requires adherence to scheduled working hours, with a competitive salary to be determined based on experience and qualifications during the interview.</p> <h3 >How to Apply</h3> <p >We invite interested applicants who meet the above requirements to submit their applications. Qualified candidates will be contacted to determine the next steps.</p></div>

<div dir="rtl"><h3 >Job Overview</h3> <p >Al Manara Al Afaq Catering Company, a branch of Al Majal Group, is seeking a <strong >Waiter</strong> to join its team in Jubail, Eastern Province. This role offers opportunities for candidates with experience ranging from 0 to 1 year to deliver exceptional service in a dynamic work environment. The position is full-time and requires commitment to providing a positive dining experience for customers and beneficiaries.</p> <h3 >Key Duties and Responsibilities</h3> <ul > <li >Assist in preparing meal supplies on the distribution line.</li> <li >Deliver meal carts to patient wards and distribute them to patients and companions.</li> <li >Gather trays and carts from patient wards and return them to the washing area in the kitchen.</li> <li >Distribute meals in the dining area (canteen) for shift staff and nursing staff.</li> <li >Apply all health and hygiene standards while performing tasks.</li> <li >Greet customers and provide menus, take orders, and serve them efficiently.</li> <li >Answer customer inquiries and provide advice on available food and beverage options.</li> <li >Set up, arrange, and clean tables, organize their contents of dishes and utensils, and return them to their designated places.</li> <li >Present bills to customers, collect and record cash payments, and use point-of-sale machines.</li> <li >Handle initial customer complaints and escalate to the responsible person for necessary actions.</li> </ul> <h3 >Qualifications and Experience</h3> <ul > <li >Practical experience ranging from 0 to 1 year in the food service field or similar roles.</li> <li >Ability to work in a team and adhere to assigned tasks.</li> </ul> <h3 >Required Skills</h3> <ul > <li >Excellent communication skills and the ability to interact courteously with customers and beneficiaries.</li> <li >Ability to work effectively in a fast-paced environment.</li> <li >Commitment to cleanliness and food safety standards.</li> <li >Ability to manage time and organize tasks efficiently.</li> </ul> <h3 >Work Environment</h3> <p >The waiter works within the food service team at the company’s facilities in Jubail, Eastern Province. This work environment requires ongoing interaction with customers and colleagues to ensure high-quality service and adherence to operating standards.</p> <h3 >How to Apply</h3> <p >We invite interested candidates who meet the above requirements to submit their applications. Qualified candidates will be contacted to proceed with the recruitment process.</p></div>