وظائف مهندس تفتيش هندسي في السعودية

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>Adree is seeking a Quality Control, Senior Engineer responsible for ensuring product/service quality by performing inspections, tests, and audits across the production or service lifecycle.<br> This role supports continuous improvement initiatives, leads quality documentation, and coordinates with production and other teams to address quality issues effectively.<br> Key Responsibilities Perform and oversee quality inspections and testing according to established standards, work instructions, and relevant specifications.<br> Review batch/production records to ensure compliance with quality procedures .<br> Identify, investigate, and document quality deviations/non-conformities (NCs) and coordinate corrective actions.<br> Conduct root cause analysis (e.<br>g., 5 Whys, Fishbone) and support CAPA (Corrective and Preventive Actions).<br> Ensure proper use and calibration status of measuring instruments/test equipment (as applicable).<br> Monitor product quality trends and report findings to management.<br> Maintain accurate and timely quality documentation (checklists, inspection reports, test records, QA logs).<br> Support internal/external audits by preparing documents and ensuring readiness for audit requirements.<br> Collaborate with production/operations to improve process capability and reduce defects/rework.<br> Train and guide junior QC team members on quality processes, inspection methods, and reporting.<br> 4-7 years of experience in Quality Control / Quality Assurance / Inspection roles (industry-specific).<br> Strong understanding of quality standards, inspection methods, and documentation practices .<br> Knowledge of CAPA, root cause analysis, and quality tools (e.<br>g., 5 Whys, Ishikawa/Fishbone, Pareto).<br> Good attention to detail and ability to follow SOPs and work instructions strictly.<br> Job Location: Client Site</span> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> No experience required </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The company is seeking a Senior Level QA/QC Engineer with extensive experience in the Oil &amp; Gas industry. This role requires a Degree Holder and involves working on Pipeline Projects and Flowline Piping Works. Key responsibilities include Quality Assurance &amp; Quality Control Activities. Mandatory certifications are BGAS Certification, Coating Inspection Certification, and Welding Inspection Certification. Preferred skills include strong knowledge of Oil &amp; Gas construction quality requirements, experience in inspection procedures, quality documentation, and client coordination, as well as familiarity with international codes and standards.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Minimum 15+ years of experience in the Oil &amp; Gas industry.</li><li>Degree Holder (Mandatory)</li><li>Engineering Degree as per Job Description.</li><li>Extensive experience in: Pipeline Projects, Flowline Piping Works, Quality Assurance &amp; Quality Control Activities</li><li>Mandatory Certifications: BGAS Certification, Coating Inspection Certification, Welding Inspection Certification</li><li>Preferred Skills: Strong knowledge of Oil &amp; Gas construction quality requirements. Experience in inspection procedures, quality documentation, and client coordination. Familiarity with international codes and standards.</li></ul><p></p></section>

<h3 >About Alfanar</h3> <p >Alfanar is a Saudi company with an international presence, primarily engaged in the manufacturing and trading of a wide variety of low, medium, and high voltage electrical products. Its extensive portfolio also encompasses conventional and renewable energy solutions, oil and gas, water treatment, infrastructure, technical services, and digital solutions. Alfanar attributes its success to a steadfast commitment to delivering the highest quality standards to its customers and fostering the continuous development of its human capital within a proactive work environment.</p> <h3 >The Role: Architectural Engineer QA/QC</h3> <p >Alfanar is seeking a dedicated <strong >Architectural Engineer QA/QC</strong> to join its team in Al Hafuf, Eastern Region. This full-time position is crucial for ensuring that all products and projects consistently meet the required standards of quality, reliability, and performance. The role involves supporting the development and implementation of quality control procedures, assisting with inspections and audits, and collaborating with cross-functional teams to address quality issues and ensure compliance with industry regulations and company standards.</p> <h3 >Key Responsibilities</h3> <p >The Architectural Engineer QA/QC will be responsible for a range of critical tasks to uphold quality standards across projects, including:</p> <ul > <li >Ensuring that all drawing dimensions and embedments are accurately followed, and communicating with designers to resolve any conflicts.</li> <li >Following issued Requests for Information (RFIs), providing comprehensive comments, and monitoring the rectification of these comments.</li> <li >Representing the department for joint inspections with consultants, clients, and other relevant parties.</li> <li >Ensuring that only approved materials are utilized in project execution and clarifying any project arrangements that require specific execution.</li> <li >Raising any quality concerns encountered to prevent recurrence and documenting non-conformities and observations, including the required Root Cause Analysis (RCA).</li> <li >Following through on the implementation of all required corrective actions.</li> </ul> <h3 >Quality Assurance and Continuous Improvement</h3> <p >A core aspect of this role involves actively contributing to quality assurance and driving continuous improvement initiatives. This includes:</p> <ul > <li >Enhancing processes to improve overall efficiency and effectiveness.</li> <li >Conducting Root Cause Analysis (RCA) for all Non-Conformity Reports (NCRs).</li> <li >Monitoring the effective implementation of Corrective Action Requests (CARs).</li> <li >Ensuring quality requirements are met to develop effective quality control processes, including specifications for products, processes, or related activities.</li> <li >Coordinating well-defined written systems, policies, and procedures, and actively seeking opportunities for automation where feasible.</li> </ul> <h3 >Professional Development and Compliance</h3> <p >Beyond technical responsibilities, the role requires a commitment to professional growth and strict adherence to company standards and regulations:</p> <ul > <li >Demonstrating the ability to obtain updated soft and technical skills relevant to the job.</li> <li >Maintaining a clear vision and plan for career path development.</li> <li >Performing planned activities to meet operational and development targets according to established delivery schedules.</li> <li >Utilizing resources effectively to achieve objectives within efficient cost and time parameters.</li> <li >Providing periodic reports detailing any deviations and the execution of planned tasks.</li> <li >Solving related problems as they arise and escalating complex operational issues when necessary.</li> <li >Complying with all related company policies, procedures, and work instructions.</li> <li >Ensuring compliance with relevant safety, quality, and environmental management procedures and controls within the defined area of work activity.</li> </ul> <h3 >Qualifications and Experience</h3> <p >Candidates for this position should possess:</p> <ul > <li >A minimum of 5 to 10 years of relevant experience in a Quality Assurance or Quality Control role, preferably within an architectural or engineering context.</li> <li >A strong understanding of quality processes, inspection compliance, and continuous improvement methodologies.</li> <li >The ability to analyze data, identify areas for improvement, and work collaboratively with diverse teams.</li> </ul>

<p>A qualified QAQC Engineer (Electrical) with a Bachelor s Degree in Electrical Engineering and 10 12 years of experience in quality assurance and quality control activities for large EPC projects involving 380kV GIS substations and OHTL projects. Candidates should have strong exposure to Saudi Energy (SE) 380kV BSP, OHTL, and Substation projects ranging from 380kV to 525kV. The applicant must possess a minimum of 10 years of direct experience in inspection and quality control of construction activities related to Saudi Energy transmission and substation projects, including electrical, installation, testing, and commissioning stages. The role requires thorough knowledge of project quality procedures, inspection &amp; test plans (ITPs), material inspections, documentation control, and compliance with Saudi Energy standards and international quality requirements.</p><p><strong>Desired Candidate Profile</strong></p><p>Candidates with Saudi Energy (SE) approved QAQC Engineer status and ISO 9001:2015 Internal Auditor certification will be given preference.</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <b>Job Description</b>Overview<p>The Senior Road Engineer leads road supervision activities, ensures engineering compliance, and provides technical expertise for major road and highway projects.</p><br>Your role<ul><li>Lead and supervise road construction and pavement works.</li><li>Review and approve design documents, shop drawings, and method statements.</li><li>Coordinate with consultants, contractors, and authorities.</li><li>Resolve technical challenges and ensure adherence to project specifications.</li><li>Monitor performance of asphalt plants, crushing plants, and field testing labs.</li><li>Ensure timely execution of works according to schedule and quality standards.</li><li>Conduct inspections and provide engineering recommendations.</li></ul>About you<ul><li>Bachelor’s/Master’s in Civil Engineering.</li><li>12–15 years’ experience in major road/highway projects.</li><li>Expertise in road design standards, pavement engineering, and materials testing.</li><li>Strong leadership, communication, and problem-solving abilities.</li></ul><span>Rewards &amp; benefits</span><p><span>Explore the rewards and benefits that help you thrive – at every stage of your life and your career.</span></p><br><p><span>This includes:</span></p><br><ul><li><span>Tax-free salary.</span></li><li><span>Life insurance coverage.</span></li><li><span>Medical insurance.</span></li><li><span>Annual leave balance.</span></li><li><span>Company gratuity scheme.</span></li><li><span>Discretionary bonus program.</span></li><li><span>Annual flight contribution.</span></li><li><span>Transportation &amp; housing allowances.</span></li><li><span>Employee Wellbeing Program: 24/7 access to specialists in finance, legal matters, family care, personal health, fitness, and nutrition.</span></li></ul><span>About AtkinsRéalis</span><p><span>We're AtkinsRéalis, a world-class engineering services and nuclear organization. We connect people, data and technology to transform the world's infrastructure and energy systems. Together, with our industry partners and clients, and our global team of consultants, designers, engineers and project managers, we can change the world. We're committed to leading our clients across our various end markets to engineer a better future for our planet and its people. </span></p><br><p><span>Find out more.</span></p><br><b>Worker Type</b>Employee<b>Job Type</b>Regular<p><span><i>At </i></span> <i><span>AtkinsRéalis</span></i><span><i>, we seek to hire individuals with diverse characteristics, backgrounds and perspectives. We strongly believe that world-class talent makes no distinctions based on gender, ethnic or national origin, sexual identity and orientation, age, religion or disability, but enriches itself through these differences. &nbsp;</i></span></p><br> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> No experience required </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

Job Purpose: <br><br>The QA/QC Engineer is responsible for ensuring that all project activities, materials, and deliverables comply with applicable quality standards, specifications, codes, and contractual requirements. The role involves developing and implementing quality control procedures, conducting inspections and audits, and driving continuous improvement across all project phases.<br><br>Responsibilities: <br><br>Develop, implement, and maintain the project Quality Management System (QMS) in line with ISO 9001 and relevant industry standards Prepare and update Inspection and Test Plans (ITPs), quality control procedures, and method statements Conduct site/factory inspections at key stages (material receipt, in-process, and final inspection) to verify compliance with drawings and specifications Review and approve material submittals, shop drawings, and subcontractor quality documentation Witness and coordinate third-party inspections, testing, and certifications as required Identify non-conformances, raise Non-Conformance Reports (NCRs), and track corrective and preventive actions (CAPA) to closure Conduct internal audits and support external/client audits; prepare audit reports and follow up on findings Maintain accurate quality records, inspection reports, test certificates, and traceability documentation Liaise with project management, engineering, procurement, and site teams to resolve quality issues promptly Support root cause analysis for recurring quality issues and recommend process improvements Ensure compliance with client specifications, codes (e.g., ASME, ASTM, API, BS, EN) and statutory/regulatory requirements Conduct training and toolbox talks to promote quality awareness among site/production personnel Compile quality metrics/KPIs and prepare periodic quality performance reports for management<br><br>Requirements<br><br>Education requirements: Bachelor's degree in Engineering (Civil, Mechanical, Electrical, Industrial, or related discipline).<br><br>Certification Requirements: ISO 9001:2015 Lead Auditor / Internal Auditor certification (preferred).<br><br>Experience: 3-8 years of relevant QA/QC experience in construction, manufacturing.<br><br>Languages: Arabic (Fluent), English (Professional).<br><br>Technical Skills: <br><br>Working knowledge of ISO 9001:2015 Quality Management System requirements and documentation Proficient in reading and interpreting engineering drawings, P&IDs, GA drawings, and technical specifications Knowledge of material testing methods

About Applus+:<br><br>Applus+ is a global leader in inspection, testing, and certification services, delivering innovative solutions across key industries including energy, construction, environment, and infrastructure. Operating in more than 70 countries, we are committed to helping clients achieve operational excellence while maintaining the highest safety and environmental standards. At Applus+, we foster a culture of integrity, technical leadership, and continuous professional development.<br><br>Location: Riyadh, Saudi Arabia<br><br>Role Summary:<br><br>The HSE Engineer will be responsible for monitoring and ensuring compliance with Health, Safety, and Environmental (HSE) requirements across road and infrastructure construction activities. The role will support the implementation of project HSE plans, applicable Saudi regulations, client requirements, and safe working practices.<br><br>Key Responsibilities:<br><br> Conduct regular HSE inspections across road, bridge, and infrastructure construction areas. Monitor contractors and subcontractors' compliance with HSE plans, risk assessments, method statements, PTW, and safe work procedures. Identify unsafe acts, conditions, and HSE non-conformities and follow up on corrective actions. Monitor key construction activities including traffic management, excavation, demolition, lifting, working at height, electrical, hot works, heavy equipment, and utility works. Monitor site housekeeping, PPE compliance, access routes, barricading, signage, and general site safety. Participate in toolbox talks, HSE inductions, safety awareness activities, and emergency drills. Report serious hazards, incidents, near misses, and significant HSE violations to the HSE management team. Support incident investigations, HSE audits, inspections, and corrective action follow-up. Prepare and maintain HSE reports, inspection records, checklists, and other required documentation. Coordinate with contractors, subcontractors, engineers, and project teams to ensure safe execution of construction activities<br><br>Requirements<br><br>Bachelor's degree in Engineering, Occupational Health and Safety, Environmental Engineering, or a related field.<br><br>Valid Saudi Council of Engineers (SCE) membership.<br><br>Minimum 7 years of HSE experience in construction projects in KSA, preferably in road and bridge construction.<br><br>Strong knowledge of construction HSE requirements, risk assessments, traffic management, and major construction hazards.<br><br>Experience in contractor and subcontractor HSE management.<br><br>Strong inspection, reporting, communication, and problem-solving skills.<br><br>Ability to work in shifts according to project requirements.<br><br>Proficiency in English.

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <br><p>SYSTRA is one of the world's leading engineering and consultancy groups specialising in public transport and sustainable mobility. With over 10,300 employees, SYSTRA's mission is to design safe and sustainable transport solutions to bring people together, develop social inclusion and facilitate access to employment, education and leisure throughout the world.</p><br><br><p>For 65 years, the Group has been working alongside cities and regions to contribute to their development by creating, improving and modernising their infrastructure and transport systems, throughout the life cycle of their projects. SYSTRA is involved from the earliest stages of design through to the testing, deployment and maintenance phases. The company provides all its services in over 80 countries worldwide and generates 74% of its turnover internationally. With its new services, SYSTRA supports its clients and partners in their digital, ecological and energy transition, in order to invent the mobility of tomorrow.</p><br><br> Context <br><p><span><span>SYSTRA’s Mobility &amp; Railway Business Unit is anticipating future growth, with new metro projects. To support these potential opportunities, we are looking for an experienced Mechanical Engineer to join our project teams and contribute to our mobility solutions.&nbsp;&nbsp;</span></span></p><br><br><p><span><span>The Mechanical Engineer will p</span></span>rovide engineering and technical support for all mechanical works performed on site therefore, SYSTRA is looking for <strong>Mechanical Engineer (Saudi National)</strong> to join our team to be based at Riyadh , Saudi Arabia.</p><br><br> Missions/Main Duties <br><ul><li>Implement and monitor mechanical construction activities in accordance with approved drawings, method statements, project specifications, and safety requirements.</li><li>Review contractor mechanical shop drawings in coordination with structural, architectural, and electrical disciplines to ensure proper integration and compliance.</li><li>Conduct regular site inspections and evaluate subcontractor performance to ensure quality and compliance with project requirements.</li><li>Support and guide site inspectors on mechanical engineering matters and assist in resolving technical issues.</li><li>Work closely with site inspectors to maintain complete and accurate Inspection and Test Records (ITRs).</li><li>Review site preparation activities and temporary works to verify compliance with contract documents and project standards.</li><li>Supervise mechanical installations and monitor contractor construction schedules related to MEP works.</li><li>Identify, report, and assist in resolving technical issues related to HVAC, smoke management systems, plumbing, firefighting systems, escalators, elevators, and other mechanical services.</li><li>Maintain and track mechanical defects, snags, and punch-list items, ensuring timely corrective action by contractors.</li><li>Review and provide comments on testing and commissioning results for mechanical systems.</li><li>Attend project meetings, site progress meetings, and technical coordination meetings with clients and project stakeholders.</li><li>Monitor compliance with site safety, health, environmental, and security requirements.</li><li>Assist in planning and sequencing construction activities in accordance with the Project Quality Plan.</li><li>Monitor work progress and support verification for progress payments and schedule reporting.</li><li>Review Field Change Requests (FCRs) and provide technical input regarding mechanical-related variations and claims.</li><li>Implement corrective actions to address delays and support timely completion of project objectives.</li><li>Prepare daily reports, inspection reports, estimates, and other project documentation as required.</li><li>Participate in final inspections, snagging activities, and project closeout processes.</li></ul> Profile/Skills <br><ul><li>Bachelor’s Degree in Mechanical Engineering or a related discipline from an accredited institution.</li><li>Minimum 5 years of relevant site-based experience on construction projects involving mechanical systems.</li><li>Extensive experience with HVAC systems, smoke management systems, plumbing, firefighting systems, escalators, and elevators.</li><li>Strong ability to interpret and execute mechanical drawings and technical documentation.</li><li>Sound understanding of engineering drawings, multidisciplinary interfaces, and construction processes.</li><li>Good knowledge of site management practices, construction safety requirements, and quality control procedures.</li><li>Strong technical, organizational, and problem-solving skills.</li><li>Ability to coordinate effectively with contractors, consultants, clients, and multidisciplinary teams.</li></ul> <br><p>Systra is an equal opportunities company; this position is open to all applicants.</p><br><br> Workplace Type <p>..</p><br><br> <br> Why SYSTRA? Read more <span> sur Why SYSTRA?</span> <br> <br> <br> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> No experience required </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Nationality"> <b>Nationality</b> </div> <div class="col is-9 p5" data-automation-id="data_Nationality"> Saudi Arabia </div> </div> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

<p>In a world of possibilities, pursue one with endless opportunities. Imagine Next! At Parsons, you can imagine a career where you thrive, work with exceptional people, and be yourself. Guided by our leadership vision of valuing people, embracing agility, and fostering growth, we cultivate an innovative culture that empowers you to achieve your full potential. Unleash your talent and redefine what s possible.</p><p>Parsons is looking for an amazingly talented Utility / Infrastructure Engineer to join our team! The Utility / Infrastructure Engineer will be responsible for the technical coordination, review, construction support, inspection, testing, and handover of infrastructure and utility systems across the project. The role will ensure that utility works are delivered in accordance with approved designs, project specifications, applicable codes and standards, authority requirements, and client requirements. The position will coordinate closely with Civil, Structural, Mechanical, Electrical, Survey, BIM, Construction, Quality, HSE, Planning, Contractors, Utility Authorities, and other project stakeholders to ensure effective delivery of infrastructure and utility networks.</p><p><strong>What You'll Be Doing:</strong></p><ul><li>Coordinate and provide technical engineering support for utility and infrastructure works across the project.</li><li>Review IFC drawings, specifications, design calculations, utility layouts, profiles, and technical documents.</li><li>Review and coordinate utility networks including: Potable water Irrigation water Fire water Stormwater drainage Foul sewer TSE / treated sewage effluent District cooling / chilled water networks Fuel systems interfaces Electrical utilities and duct banks ICT / telecommunications ducting Other underground and above-ground infrastructure systems, as applicable.</li><li>Coordinate utility interfaces with roads, pavements, buildings, structures, airfield facilities, and existing infrastructure.</li><li>Review utility routes, corridors, levels, slopes, profiles, and connection points.</li><li>Verify that utility designs consider capacity, hydraulic requirements, constructability, maintainability, and future expansion.</li><li>Review hydraulic calculations and network capacity requirements for applicable utility systems.</li><li>Review pipe sizing, pressure requirements, flow rates, gradients, invert levels, manholes, chambers, valves, and associated infrastructure.</li><li>Coordinate utility crossings and interfaces with existing and proposed infrastructure.</li><li>Identify clashes and technical interfaces between utility networks and other disciplines.</li><li>Coordinate with BIM teams to support utility clash detection and 3D coordination.</li><li>Review contractor shop drawings, material submittals, method statements, and technical submissions.</li><li>Verify proposed utility materials and equipment comply with approved specifications and project requirements.</li><li>Provide technical support to construction teams during utility installation activities.</li><li>Conduct site inspections and verify installation against approved drawings and specifications.</li><li>Monitor utility installation including excavation, bedding, pipe laying, jointing, backfilling, chambers, manholes, protection, and reinstatement.</li><li>Verify utility levels, alignment, gradients, coordinates, and dimensional requirements in coordination with the Survey team.</li><li>Coordinate with Survey Engineers regarding setting-out and as-built verification.</li><li>Review and witness utility testing activities including pressure testing, leakage testing, flushing, disinfection, CCTV inspection, flow testing, and other applicable tests.</li><li>Review testing and commissioning procedures and verify test results.</li><li>Coordinate with relevant authorities and utility service providers for connections, inspections, approvals, and technical requirements.</li><li>Support coordination with existing utility owners and stakeholders to avoid disruption to operational services.</li><li>Review and resolve RFIs, technical queries, design clarifications, and site engineering issues.</li><li>Assess proposed design changes, technical alternatives, and deviations and provide engineering recommendations.</li><li>Identify utility conflicts, constructability issues, capacity constraints, and technical risks and recommend mitigation measures.</li><li>Support preparation and review of Inspection &amp; Test Plans (ITPs) for utility works.</li><li><br></li></ul><p><strong>What Required Skills You'll Bring:</strong></p><ul><li>Bachelor s degree in Civil Engineering, Mechanical Engineering, Utilities Engineering, or a related discipline.</li><li>5+ years of relevant experience in utilities, infrastructure, civil works, or major construction projects.</li><li>Proven experience in airport, infrastructure, roads, utilities, or large-scale development projects.</li><li>Good understanding of underground utility networks and infrastructure systems.</li><li>Experience in multidisciplinary coordination and utility interface management.</li><li>Experience working with contractors, consultants, authorities, and utility service providers.</li><li>Professional Engineering certification is preferred.</li><li>PMP or equivalent project management training is an advantage.</li><li>Relevant utility / infrastructure certifications are an advantage.</li><li>AutoCAD Civil 3D / BIM / utility coordination training is preferred.</li><li>Relevant HSE certification is an advantage.</li></ul><p>Utility Infrastructure Engineering Underground Utility Networks Water Supply Networks Fire Water Networks Irrigation Networks Sewer &amp; Foul Drainage Stormwater Drainage TSE / Recycled Water Systems District Cooling / Chilled Water Networks Utility Corridors Utility Diversions &amp; Relocations Utility Crossings Pipework &amp; Chambers Hydraulic Calculations Pipe Sizing &amp; Network Capacity Levels, Profiles &amp; Gradients Utility Clash Detection BIM / 3D Utility Coordination Shop Drawing Review Material Submittal Review Method Statement &amp; ITP Review Site Inspection &amp; Construction Support Pressure &amp; Leakage Testing Flushing &amp; Disinfection CCTV / Drainage Inspection Survey &amp; As-Built Verification RFI &amp; Technical Query Management NCR &amp; Corrective Action Management Authority / Utility Provider Coordination As-Built &amp; Handover Documentation AutoCAD / Civil 3D / BIM Applicable AWWA / ASTM / ASME / BS / EN / NFPA Standards</p><p><br></p><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor s degree in Civil Engineering, Mechanical Engineering, Utilities Engineering, or a related discipline.</li><li>5+ years of relevant experience in utilities, infrastructure, civil works, or major construction projects.</li><li>Proven experience in airport, infrastructure, roads, utilities, or large-scale development projects.</li><li>Good understanding of underground utility networks and infrastructure systems.</li><li>Experience in multidisciplinary coordination and utility interface management.</li><li>Experience working with contractors, consultants, authorities, and utility service providers.</li><li>Professional Engineering certification is preferred.</li><li>PMP or equivalent project management training is an advantage.</li><li>Relevant utility / infrastructure certifications are an advantage.</li><li>AutoCAD Civil 3D / BIM / utility coordination training is preferred.</li><li>Relevant HSE certification is an advantage.</li></ul><p>Utility Infrastructure Engineering Underground Utility Networks Water Supply Networks Fire Water Networks Irrigation Networks Sewer &amp; Foul Drainage Stormwater Drainage TSE / Recycled Water Systems District Cooling / Chilled Water Networks Utility Corridors Utility Diversions &amp; Relocations Utility Crossings Pipework &amp; Chambers Hydraulic Calculations Pipe Sizing &amp; Network Capacity Levels, Profiles &amp; Gradients Utility Clash Detection BIM / 3D Utility Coordination Shop Drawing Review Material Submittal Review Method Statement &amp; ITP Review Site Inspection &amp; Construction Support Pressure &amp; Leakage Testing Flushing &amp; Disinfection CCTV / Drainage Inspection Survey &amp; As-Built Verification RFI &amp; Technical Query Management NCR &amp; Corrective Action Management Authority / Utility Provider Coordination As-Built &amp; Handover Documentation AutoCAD / Civil 3D / BIM Applicable AWWA / ASTM / ASME / BS / EN / NFPA Standards</p><p><strong>What Desired Skills You'll Bring:</strong></p><ul><li>Strong technical and analytical skills.</li><li>Excellent problem-solving and engineering judgment.</li><li>Strong multidisciplinary coordination and interface management skills.</li><li>Excellent communication and stakeholder management capabilities.</li><li>Strong attention to detail and commitment to engineering quality.</li><li>Proactive approach to identifying utility conflicts and project risks.</li><li>Ability to coordinate multiple utility interfaces simultaneously.</li><li>Good understanding of construction sequencing and site requirements.</li><li>Ability to work effectively with contractors, consultants, authorities, and project teams.</li><li>Strong documentation and reporting skills.</li><li>Ability to work under demanding project schedules.</li><li>Strong teamwork and collaboration skills.</li><li>Commitment to safety, quality, reliability, and technical compliance.</li></ul>

<p>Job Description Overview This is a senior-level Quality Assurance and Quality Control (QA/QC) position responsible for overseeing quality management systems, contract compliance, inspections, testing activities, and adherence to international construction standards across high-rise residential, commercial, mixed-use, hospitality, and building infrastructure projects. The role requires strong technical expertise in building construction, leadership in quality systems implementation, and the ability to effectively coordinate with contractors, consultants, suppliers, and project stakeholders to ensure successful project delivery.</p><p>Your role Understands the requirements of construction contracts, specifications, Requests for Proposal (RFP), and Tender Documents related to building and high-rise construction projects. Prepares clear and concise quality reports, inspection reports, audit findings, non-conformance reports (NCRs), corrective action reports (CARs), and technical correspondence. Monitors QA/QC aspects of civil, structural, architectural, and MEP construction activities to ensure compliance with project specifications, approved shop drawings, codes, and standards. Reviews and evaluates contractor and subcontractor Quality Management Systems (QMS), Inspection and Test Plans (ITPs), Method Statements, and Quality Control Procedures. Conducts surveillance inspections and audits to verify compliance with project requirements, ISO standards, and approved quality procedures. Reviews material submittments, technical data sheets, samples, mock-ups, and supplier qualifications for compliance with project specifications. Ensures that incoming materials, construction works, and completed installations conform to approved standards and project requirements. Reviews and interprets drawings, specifications, BOQs, method statements, IFC drawings, technical standards, and applicable local authority regulations. Conducts and documents inspections for structural concrete works, reinforcement installation, steel structures, waterproofing, façade systems, architectural finishes, MEP installations, and fit-out works. Coordinates with consultants, contractors, testing laboratories, and suppliers to ensure timely inspections and approvals. Monitors implementation of corrective and preventive actions associated with quality deficiencies and non-conformance reports. Leads internal and external quality audits and assesses contractor compliance with project quality requirements and ISO 9001 standards. Participates in project meetings and provides updates regarding quality performance, quality issues, risks, and mitigation plans. Monitors testing activities including concrete, steel, soil, waterproofing, façade, fireproofing, and MEP systems testing. Reviews commissioning documentation and participates in pre-handover, snagging, and final acceptance inspections. Provides technical guidance and mentoring to QA/QC Engineers, Inspectors, and site teams. Assists in developing quality training programs, quality awareness initiatives, and lessons learned exercises. Maintains project quality records, inspection logs, test reports, material approvals, and audit documentation. Promotes safe work practices and adherence to company HSE requirements during quality inspection activities. Performs other duties as assigned by the QA/QC Manager or Project Director.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Strong knowledge of QA/QC principles, quality management systems, and quality control procedures for building construction projects.</li><li>Experience implementing and maintaining ISO 9001 Quality Management Systems.</li><li>Thorough understanding of construction materials, testing requirements, inspection methodologies, and quality assurance processes.</li><li>Ability to develop, review, and implement Inspection &amp; Test Plans (ITPs), Method Statements, and Quality Procedures.</li><li>Experience conducting quality audits and managing corrective and preventive action processes.</li><li>Knowledge of international construction codes and standards, including ASTM, ACI, BS, IEC, NFPA, and local authority requirements.</li><li>Strong understanding of structural, architectural, façade, finishing, and MEP construction activities.</li><li>Excellent analytical, problem-solving, and root cause analysis skills.</li><li>Ability to identify quality risks and implement proactive quality improvement initiatives.</li><li>Strong communication, report writing, and stakeholder management skills.</li><li>Proficiency in Microsoft Office Suite, Aconex, Procore, BIM platforms, and quality management software.</li><li>Ability to work independently in a fast-paced construction environment and manage multiple priorities.</li><li>Bachelor's Degree in Civil Engineering, Construction Engineering, or a related engineering discipline.</li><li>Minimum 12-15 years of QA/QC experience in major building construction projects, including at least 5 years on high-rise residential, commercial, mixed-use, hospitality, or tower developments.</li><li>Proven experience in quality management of reinforced concrete structures, building envelopes, interior fit-out, and MEP installations.</li><li>Experience working with leading contractors, consultants, or PMC organizations on large-scale building projects.</li><li>Certified Quality Engineer (CQE), ISO 9001 Lead Auditor, or equivalent quality certification is preferred.</li><li>Membership in recognized professional bodies is an advantage.</li><li>Experience in Middle East, GCC, or international high-rise construction projects is preferred.</li></ul>

MAIN PURPOSE OF JOBResponsible for ensuring mechanical works meet project specifications, quality standards, and client requirements. Performs detailed inspections, technical approvals, NCR management, and supports in continuous improvement of mechanical quality performance.<br>DUTIES AND RESPONSIBILITIESConduct detailed inspections of mechanical works to ensure compliance with approved drawings, specifications, and standards. Review and approve inspection test results, measurements, and related documentation. Identify, document, and report Non-Conformance Reports (NCRs) and follow up on corrective actions. Support Root Cause Analysis (RCA) and implementation of corrective and preventive actions. Provide technical support and guidance to team leaders and inspectors on mechanical quality matters. Review mechanical designs, installations, and completed works for conformity with project requirements. Prepare and maintain detailed inspection reports, quality records, and inspection logs. Attend Hold Point (HP) and Witness Point (WP) inspections. Address client/consultant comments and support continuous process improvement and lessons learned.• Ensure compliance with ISO 9001, project QMS, and participate in internal quality audits SAFETY AND QUALITY RESPONSIBILITIESProtect, and strive for improvement of, the health, safety and security of our people at all times;Eliminate Quality non-conformances and HSE accidents;Ensure consistent and continuous compliance by all employees and vendors with safety and regulatory requirements, standards and protocols Responsible for creating safe work environment, manage risks and reduce exposure to liability Support line Management in managing HSE Incidents, corrective/preventive actions<br>SOCIAL COMPLIANCE RESPONSIBILITIESMaintain company’s social management system policy via follow and report any deviated cases against PSP IMS policy. Take his own responsibility to comply with the social accountability requirements according to the standard SA8000. Co-operate with the SP team for any further communication in order to improve and enhance the level of implementation and compliance with the company’s social management system.<br>REQUIRED FUNCTIONAL QUALIFICATIONBasic Requirements:Qualification: Bachelor of Mechanical Engineering. Related Field Experience: +5 years of experience in related field. Overall Experience: +5 years of experience.

Summary: The Senior QA/QC Engineer is responsible for leading and overseeing all Quality Assurance, Quality Control, inspection, testing, and calibration activities within the valve manufacturing process. The role ensures compliance with applicable quality management systems, customer specifications, API standards, ISO requirements, and industry regulations. The incumbent will drive continuous improvement initiatives, supervise inspection personnel, manage audits, analyze quality performance data, and maintain accurate quality records to ensure product conformity and customer satisfaction. Key Responsibilities Quality Management & Compliance Maintain, implement, and continuously improve the Quality Management System (QMS) in accordance with ISO 9001, API Spec Q1, and applicable customer requirements. Ensure compliance with API product standards, ASME codes, company procedures, and industry best practices. Act as a focal point for quality-related matters and support external audits, customer inspections, and certification assessments. Ensure adherence to quality system procedures and API product requirements across all manufacturing processes. Inspection, Testing & Calibration Lead and supervise all receiving, in-process, and final inspection activities. Plan and allocate inspection resources, personnel, and schedules to meet production requirements. Establish, review, and enhance Inspection and Test Plans (ITPs), quality control instructions, and quality procedures. Oversee the control, maintenance, verification, and calibration of inspection gauges, measuring instruments, and testing equipment. Ensure calibration records and inspection documentation are maintained in accordance with ISO and company requirements. Audit & Continuous Improvement Develop and maintain internal quality audit schedules. Conduct internal audits and support customer and third-party audits. Prepare audit reports, monitor corrective and preventive actions (CAPA), and ensure effective closure of audit findings. Analyze quality data, identify trends, and recommend improvement actions to enhance product quality and process efficiency. Coordinate with the Management Representative (MR) to implement preventive and corrective actions. Cross-Functional Coordination Collaborate closely with Engineering, Manufacturing, Production Planning, Commercial, and Procurement departments to define inspection requirements. Review customer specifications, contract requirements, quality plans, and applicable standards to ensure compliance throughout production. Support customer complaints investigations, root cause analysis, and implementation of corrective actions. Team Leadership Lead and mentor QA/QC inspectors and quality personnel. Establish SMART objectives for the inspection team and monitor performance against established targets. Promote a quality-focused culture and continuous improvement within the organization. Technical Requirements Strong knowledge of Quality Management Systems, including:ISO 9001 (Latest Edition) API Spec Q1 (Latest Edition) Thorough understanding of quality requirements related to valve manufacturing and oil & gas applications. Sound knowledge of API product standards, ASME codes, and other relevant industry standards. Experience in inspection, testing, calibration, and quality assurance methodologies. Knowledge of Non-Destructive Testing (NDT) techniques, including:Dye Penetrant Testing (DPT/PT) Magnetic Particle Testing (MPT/MT) Radiographic Film Interpretation (RTFI) Preferred Certifications ISO 9001 Lead Auditor Certification (Latest Edition). API Q1 Lead Auditor Certification. ASNT SNT-TC-1A Level II or ASNT CP-189 Level II certification in applicable NDT methods. Internal Auditor Certification. Calibration Certification. API Product Certifications (API 6D, API 600, API 602, API 607, API 608, API 609, API 598, etc.) are an added advantage. Qualifications & Experience Option 1Bachelor's Degree in Mechanical Engineering or equivalent, with:Minimum 10 years of experience in Quality Assurance, Quality Control, and Inspection. Minimum 5 years of experience in valve manufacturing for Oil & Gas applications. Option 2Diploma in Mechanical Engineering or equivalent, with:Minimum 13 years of experience in Quality Assurance, Quality Control, and Inspection. Minimum 7 years of experience in valve manufacturing for Oil & Gas applications. Preferred Experience Experience with a reputable valve manufacturing company. Experience working on projects for Saudi Aramco or other major oil & gas operators. Proven track record in managing customer inspections, audits, and quality compliance requirements. Skills & Competencies Strong leadership and team management skills. Excellent analytical and problem-solving abilities. Effective communication and reporting skills. Attention to detail and commitment to quality excellence. Ability to interpret engineering drawings, specifications, and quality requirements. Proficiency in quality reporting and documentation systems. Fluent in written and spoken English.

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Company : Saudi Aramco (ASC)<br>Skills : Subsea Engineer , Subsea Engineering<br>Experience : 7 + Years<br>Education : Bachelors/3-5 yr Degree<br>Location : Saudi Arabia</p><p>Aramco energizes the world economy. Aramco occupies a special position in the global energy industry. We are one of the world's largest producers of hydrocarbon energy and chemicals, with among the lowest Upstream carbon intensities of any major producer. With our significant investment in technology and infrastructure, we strive to maximize the value of the energy we produce for the world along with a commitment to enhance Aramco's value to society. Headquartered in the Kingdom of Saudi Arabia, and with offices around the world, we combine market discipline with a generations' spanning view of the future, born of our nine decades experience as responsible stewards of the Kingdom's vast hydrocarbon resources. This responsibility has driven us to deliver significant societal and economic benefits to not just the Kingdom, but also to a vast number of communities, economies, and countries that rely on the vital and reliable energy that we supply. We are one of the most profitable companies in the world, as well as amongst the top five global companies by market capitalization.</p><p>Overview<br>We are seeking a Subsea Engineer to join our Marine Operations Division. Marine Operations Division is responsible for leading the planning, engineering and delivery of key subsea tasks to deliver safe and efficient vessel operations. Your primary role is to provide subsea services to offshore customers, such as diving and Remote Operated Vehicle (ROV) operations, such as underwater inspections, repairs, maintenance and construction. Also, you will provide an advanced/higher level of technical expertise and support in resolving complex technical issues related to subsea operations.</p><p>Duties and Responsibilities<br>As the successful candidate you will be required to perform the following:<br>Provide the main interface between diving operations and their customers, when developing the detailed procedures, equipment lists and any other relevant requirements.<br>Lead the onshore planning and offshore execution of subsea operations.<br>Act as the focal point for all Scope of Work (SOW) reviews, design review and Saudi Aramco engineering compliance.<br>Ensure all subsea work is in full compliance with the Saudi Aramco's Marine Operations Manual and internally recognized Marine Guidance Documents.<br>Perform the role of Client Worksite Representative offshore, when necessary, while ensuring that the intervention contractor is provided with the correct site information and that the site is safe to use by identifying known hazards.<br>Provide technical input to any development projects, supplying functional guidance to engineering contractors on discipline specific matters, to ensure that quality of work is meeting Aramco standards, within timely and cost-effective manner.<br>Act as Saudi Aramco technical point of contact for all subsea project contracts.<br>Provide technical input for any decommissioning or new projects when necessary.</p><p>Minimum Requirements<br>You will hold a Bachelor's Degree in Civil, Mechanical or Marine Engineering. A Master's Degree in Subsea or Pipeline Engineering is preferred.<br>You will have a minimum of 7 years of experience in Subsea Engineering related roles in the oil and gas industry<br>Professional Chartership with an Internationally Recognized Engineering Body is preferred.<br>You will be able to primarily work for a Major Subsea Contractor that undertakes underwater inspections, repairs, maintenance and construction activities.<br>You Must have significant offshore experience, delivery subsea operations in a lead or field engineer role.<br>You will have experience in international Marine regulatory body requirements, classification standards, Marine engineering practices, subsea engineering practices, underwater technologies, codes and specifications.<br>You must have Excellent communication skills and the ability to build strong relationships and work effectively in a team.<br>You will have excellent Microsoft office applications skills.</p><p>Work Location and Work Schedule<br>Work Location: Within Saudi Arabia - To be specified in Job offer<br>Work Schedule: Full Time - To be specified in Job offer</p><p>Job Post Duration<br>Job posting start date: 06/29/2026<br>Job posting end date: 12/31/2026</p><p>Working environment<br>Our high-performing employees are drawn by the challenging and rewarding professional, technical and industrial opportunities we offer, and are remunerated accordingly. At Aramco, our people work on truly world-scale projects, supported by investment in capital and technology that is second to none. And because, as a global energy company, we are faced with addressing some of the world's biggest technical, logistical and environmental challenges, we invest heavily in talent development. We have a proud history of educating and training our workforce over many decades. Employees at all levels are encouraged to improve their sector-specific knowledge and competencies through our workforce development programs - one of the largest in the world.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>You will hold a Bachelor's Degree in Civil, Mechanical or Marine Engineering. A Master's Degree in Subsea or Pipeline Engineering is preferred.<br>You will have a minimum of 7 years of experience in Subsea Engineering related roles in the oil and gas industry<br>Professional Chartership with an Internationally Recognized Engineering Body is preferred.<br>You will be able to primarily work for a Major Subsea Contractor that undertakes underwater inspections, repairs, maintenance and construction activities.<br>You Must have significant offshore experience, delivery subsea operations in a lead or field engineer role.<br>You will have experience in international Marine regulatory body requirements, classification standards, Marine engineering practices, subsea engineering practices, underwater technologies, codes and specifications.<br>You must have Excellent communication skills and the ability to build strong relationships and work effectively in a team.<br>You will have excellent Microsoft office applications skills.</p><p></p></section>

<h3 >About SATORP and the Role</h3> <p >Saudi Aramco Total Refining and Petrochemical Company (SATORP) is seeking a <strong >Senior Maintenance Engineer</strong> to join its team in Al Jubail, Eastern, Saudi Arabia. This full-time position is critical for leading maintenance engineering activities within the company's Polymer plants, specifically focusing on Butadiene and C4 units.</p> <h3 >Role Purpose and Scope</h3> <p >The successful candidate will be responsible for enhancing equipment reliability, optimizing maintenance strategies, and providing essential support for plant turnaround activities. This role ensures the safe and efficient operation of critical assets within MTBE, Butadiene, Raffinate, and associated C4 processing facilities. It requires strong technical expertise in petrochemical processes, rotating and static equipment, reliability engineering, and maintenance planning.</p> <h3 >Key Responsibilities</h3> <ul > <li >Develop and optimize preventive, predictive, and reliability-centered maintenance programs for Polymer plants assets.</li> <li >Monitor equipment performance and implement reliability improvement initiatives to increase plant availability and reduce unplanned shutdowns.</li> <li >Provide technical support for troubleshooting failures involving rotating equipment, heat exchangers, columns, reactors, pumps, compressors, and associated systems.</li> <li >Lead root cause failure analysis (RCFA) and implement corrective actions.</li> <li >Support turnaround, shutdown, and major maintenance activities from planning through execution and commissioning.</li> <li >Review maintenance Key Performance Indicators (KPIs) and recommend continuous improvement initiatives.</li> <li >Collaborate closely with Operations, Inspection, Process Engineering, and Reliability teams to improve asset performance.</li> <li >Ensure compliance with company Health, Safety, and Environment (HSE) standards, industry best practices, and regulatory requirements.</li> <li >Review engineering modifications and Management of Change (MOC) activities related to plant equipment.</li> <li >Support contractor management and ensure quality execution of maintenance work.</li> </ul> <h3 >Required Qualifications</h3> <ul > <li >Bachelor's Degree in Mechanical Engineering or a related Engineering discipline.</li> <li >5-10 years of experience in maintenance engineering within petrochemical or similar heavy industrial environments.</li> </ul> <h3 >Essential Experience and Technical Skills</h3> <ul > <li >Hands-on experience with MTBE, Butadiene, C4 Extraction, Aromatics, Olefins, or similar petrochemical units.</li> <li >Experience working with SAP PM or equivalent Computerized Maintenance Management Systems (CMMS).</li> <li >Familiarity with API, ASME, ISO, and international maintenance standards.</li> </ul> <h3 >Application Information</h3> <p >Candidates who meet the specified qualifications and experience are encouraged to apply. Salary for this position will be discussed during the interview process.</p>

Applus<br><br>4 days ago<br><br>On-site<br><br>Riyadh, Riyadh Province, Saudi Arabia<br><br>Description<br><br>About Applus+:<br><br>Applus+ is a global leader in inspection, testing, and certification services, delivering innovative solutions across key industries including energy, construction, environment, and infrastructure. Operating in more than 70 countries, we are committed to helping clients achieve operational excellence while maintaining the highest safety and environmental standards. At Applus+, we foster a culture of integrity, technical leadership, and continuous professional development.<br><br>Location: Riyadh, Saudi Arabia<br><br>Role Summary:<br><br>The HSE Engineer will be responsible for monitoring and ensuring compliance with Health, Safety, and Environmental (HSE) requirements across road and infrastructure construction activities. The role will support the implementation of project HSE plans, applicable Saudi regulations, client requirements, and safe working practices.<br><br>Key Responsibilities:<br><br>Conduct regular HSE inspections across road, bridge, and infrastructure construction areas. Monitor contractors and subcontractors' compliance with HSE plans, risk assessments, method statements, PTW, and safe work procedures. Identify unsafe acts, conditions, and HSE non-conformities and follow up on corrective actions. Monitor key construction activities including traffic management, excavation, demolition, lifting, working at height, electrical, hot works, heavy equipment, and utility works. Monitor site housekeeping, PPE compliance, access routes, barricading, signage, and general site safety. Participate in toolbox talks, HSE inductions, safety awareness activities, and emergency drills. Report serious hazards, incidents, near misses, and significant HSE violations to the HSE management team. Support incident investigations, HSE audits, inspections, and corrective action follow-up. Prepare and maintain HSE reports, inspection records, checklists, and other required documentation. Coordinate with contractors, subcontractors, engineers, and project teams to ensure safe execution of construction activities.<br><br>Requirements<br><br>Bachelor’s degree in Engineering, Occupational Health and Safety, Environmental Engineering, or a related field.<br><br>Valid Saudi Council of Engineers (SCE) membership.<br><br>Minimum 7 years of HSE experience in construction projects in KSA, preferably in road and bridge construction.<br><br>Strong knowledge of construction HSE requirements, risk assessments, traffic management, and major construction hazards.<br><br>Experience in contractor and subcontractor HSE management.<br><br>Strong inspection, reporting, communication, and problem-solving skills.<br><br>Ability to work in shifts according to project requirements.<br><br>Proficiency in English.<br><br>job#on Apply" target="_blank" rel="noopener noreferrer" href="https://apply.workable.com/applus/j/40E3492F45/apply?utm_id=16441949&utm_source=HSE+Jobs+in+The+GCC">Apply now<br><br>More jobs<br><br>Hse Supervisor<br><br>El Seif<br><br>Senior Manager - Fire, Life Safety Planning (MAS291)<br><br>Qiddiya Investment Company<br><br>Key Responsibilities:<br><br>Conduct regular HSE inspections across road, bridge, and infrastructure construction areas. Monitor contractors and subcontractors' compliance with HSE plans, risk assessments, method statements, PTW, and safe work procedures. Identify unsafe acts, conditions, and HSE non-conformities and follow up on corrective actions. Monitor key construction activities including traffic management, excavation, demolition, lifting, working at height, electrical, hot works, heavy equipment, and utility works. Monitor site housekeeping, PPE compliance, access routes, barricading, signage, and general site safety. Participate in toolbox talks, HSE inductions, safety awareness activities, and emergency drills. Report serious hazards, incidents, near misses, and significant HSE violations to the HSE management team. Support incident investigations, HSE audits, inspections, and corrective action follow-up. Prepare and maintain HSE reports, inspection records, checklists, and other required documentation. Coordinate with contractors, subcontractors, engineers, and project teams to ensure safe execution of construction activities.<br><br>Requirements<br><br>Bachelor’s degree in Engineering, Occupational Health and Safety, Environmental Engineering, or a related field.<br><br>Valid Saudi Council of Engineers (SCE) membership.<br><br>Minimum 7 years of HSE experience in construction projects in KSA, preferably in road and bridge construction.<br><br>Strong knowledge of construction HSE requirements, risk assessments, traffic management, and major construction hazards.<br><br>Experience in contractor and subcontractor HSE management.<br><br>Strong inspection, reporting, communication, and problem-solving skills.<br><br>Ability to work in shifts according to project requirements.<br><br>Proficiency in English.

<ul><li>Oversee and manage on-site construction activities, ensuring projects adhere to engineering plans, specifications, and safety regulations.</li><li>Conduct regular inspections and quality control checks of construction work to identify and rectify any deficiencies or deviations from the design.</li><li>Collaborate with project managers, contractors, and other stakeholders to coordinate construction schedules, resolve site issues, and maintain project progress.</li><li>Prepare and review daily, weekly, and monthly progress reports, including tracking work completed, resources used, and any challenges encountered.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Possesses a Bachelor's degree in Civil Engineering from an accredited university, demonstrating a strong foundation in engineering principles.</p></li><li><p>Holds a Professional Engineer (PE) license or is actively pursuing licensure, showcasing a commitment to professional standards and ethics.</p></li><li><p>Demonstrates a minimum of 7 years of experience in field civil engineering, with a proven track record of successful project execution.</p></li><li><p>Exhibits expertise in construction management, including scheduling, budgeting, and resource allocation, ensuring projects are completed on time and within budget.</p></li></ul>

<h3 >About the Role</h3> <p >Parsons Corporation is seeking a <strong >Senior QA/QC Engineer</strong> to join its team in <strong >Riyadh, Saudi Arabia</strong>. This full-time position provides senior-level, site-based civil quality control oversight for a PIF-backed national master developer across assigned construction zones or packages.</p> <h3 >Role Purpose and Compliance</h3> <p >The Senior QA/QC Engineer is responsible for verifying that civil works are executed in full compliance with IFC drawings, approved shop drawings, project technical specifications, contractual requirements, and Saudi codes and authority standards. This role offers hands-on civil inspection leadership, supports package-level QA/QC governance, and ensures contractor compliance through structured site surveillance, defect prevention, and documented verification. The position is execution-focused and site-intensive, with a strong emphasis on civil construction quality.</p> <h3 >Core Civil Inspection Responsibilities</h3> <ul > <li >Conduct and lead inspections of civil works, including earthworks, subgrade preparation, foundations, footing works, reinforcement installation, and concrete works (pre-pour, during pour, post-pour).</li> <li >Inspect structural elements, retaining structures, infrastructure works (stormwater, drainage, utilities), roadworks, pavements, external works, and hardscape.</li> <li >Support the implementation of approved Inspection and Test Plans (ITPs) for civil works and review civil method statements prior to execution.</li> <li >Verify contractor QC inspection reports and daily logs, and witness field testing activities such as soil compaction, concrete slump, and cube sampling.</li> <li >Validate third-party laboratory testing compliance and ensure the calibration status of site testing equipment.</li> <li >Provide technical clarification support to site teams as required, ensuring compliance with IFC drawings and specifications.</li> </ul> <h3 >Quality Assurance and Defect Management</h3> <ul > <li >Identify high-risk civil activities prior to execution and recommend preventive inspection strategies, supporting early warning reporting of quality risks.</li> <li >Promote a defect prevention culture within contractor teams.</li> <li >Raise Non-Conformance Reports (NCRs) for civil non-conformances, review contractor root cause analysis and corrective actions, and conduct re-inspections prior to NCR closure.</li> <li >Monitor recurring civil defect trends (*, honeycombing, cracking, compaction failures) and support defect clearance during sectional and final handover.</li> <li >Participate in civil pre-handover inspections, verify the closure of punch list items, and review civil-related as-built drawings.</li> </ul> <h3 >Training and Contractor Oversight</h3> <ul > <li >Conduct toolbox talks on common civil workmanship failures and share lessons learned related to structural and infrastructure works.</li> <li >Mentor junior civil inspectors and provide feedback to contractor civil teams on recurring issues.</li> <li >Support quality awareness sessions related to specifications and inspection tolerances.</li> <li >Perform routine and unannounced surveillance inspections to identify workmanship deficiencies early.</li> <li >Assess the adequacy of contractor civil QC personnel and enforce adherence to approved procedures and inspection sequences.</li> <li >Escalate repeated non-compliance to the Project Quality Manager.</li> </ul> <h3 >Qualifications and Experience</h3> <ul > <li >A minimum of <strong >5 to 10 years</strong> of relevant experience in civil quality control and assurance within construction projects.</li> <li >Demonstrated ability to ensure proper closure of hold and witness points, adequate material traceability, and inspection readiness prior to approvals.</li> <li >Proficiency in confirming test records and inspection documentation completeness, and ensuring proper EDMS uploading (*, Aconex) for traceability.</li> </ul>

<h3 >About the Project Engineer Role</h3> <p >Atlas Copco is seeking a <strong >Project Engineer</strong> to join its Machine Vision and Surface Inspection Solutions business in Jeddah. This full-time role involves managing the successful execution and delivery of customer projects, from initial requirements analysis and solution design through installation, commissioning, and handover. The Project Engineer will collaborate with customers, sales teams, engineering specialists, and service personnel to ensure projects are delivered on time, within scope, and to quality standards. This position contributes to inspection and automation technologies across various industrial sectors.</p> <h3 >Core Responsibilities</h3> <ul > <li >Manage the execution of Machine Vision and Surface Inspection projects throughout the project lifecycle, from initiation to final acceptance.</li> <li >Analyze customer manufacturing, assembly, and inspection processes to understand technical requirements and project objectives.</li> <li >Develop application concepts and propose tailored inspection and automation solutions that meet customer needs.</li> <li >Conduct feasibility studies, application testing, and proof-of-concept (POC) evaluations to validate proposed solutions.</li> <li >Coordinate project activities with customers, suppliers, internal engineering teams, and other stakeholders to ensure successful project delivery.</li> <li >Design, configure, and optimize vision systems, including cameras, optics, lighting, software, and automation interfaces.</li> <li >Prepare project documentation, technical specifications, layouts, schedules, and progress reports.</li> <li >Oversee system installation, commissioning, calibration, testing, and validation activities at customer sites.</li> <li >Identify, track, and mitigate project risks while ensuring adherence to project timelines and deliverables.</li> <li >Support factory acceptance tests (FAT), site acceptance tests (SAT), and customer sign-off processes.</li> <li >Provide technical guidance and support during project implementation and resolve technical issues through effective troubleshooting and root cause analysis.</li> <li >Deliver customer training on system operation, maintenance, and best practices.</li> <li >Collaborate with Sales and Business Development teams during pre-sales activities, technical discussions, and customer presentations when required.</li> <li >Ensure compliance with company quality, safety, and project management standards.</li> <li >Maintain strong customer relationships and contribute to achieving high levels of customer satisfaction.</li> </ul> <h3 >Required Qualifications and Experience</h3> <ul > <li >Bachelor's Degree in Mechatronics, Electrical, Electronics, Instrumentation, Mechanical, Automation Engineering, or a related technical discipline.</li> <li >2-5 years of experience in Project Engineering, Application Engineering, Industrial Automation, Machine Vision, Inspection Systems, or related fields.</li> <li >Experience managing technical projects within manufacturing or industrial automation environments.</li> <li >Strong understanding of industrial production processes, quality inspection systems, and automation technologies.</li> <li >Hands-on experience with Machine Vision solutions, including cameras, optics, lighting systems, sensors, and vision software.</li> <li >Demonstrated ability to manage multiple projects and priorities simultaneously.</li> <li >Strong analytical, troubleshooting, and problem-solving capabilities.</li> <li >Excellent communication, interpersonal, and stakeholder management skills.</li> <li >Willingness to travel regionally and internationally as required to support project activities.</li> <li >Candidates are encouraged to apply even if they do not meet every single requirement, as diverse experiences and perspectives are valued.</li> </ul> <h3 >Work Location and Arrangement</h3> <p >This role is based in <strong >Jeddah, Saudi Arabia</strong>, and operates under a hybrid working arrangement. This allows for a split between remote work and on-site presence.</p> <h3 >Working at Atlas Copco</h3> <ul > <li >Career development is supported through individual skills, curiosity, and collaboration within a global network.</li> <li >Opportunities for shared knowledge and learning across a global network.</li> <li >Focus on long-term development and encouragement to explore new ideas for advancement.</li> <li >Innovation is integrated into operations, fostering testing, improvement, and the creation of impactful solutions.</li> <li >Opportunity to contribute insights and take ownership, supported by flexible working methods and empowering leadership.</li> </ul> <h3 >Application Process</h3> <p >Interested candidates are invited to submit their applications for this Project Engineer position.</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span><u><b>Job Summary</b></u> <br></span><p>The Senior QA/QC Engineer ensures that work / projects are delivered based on good work practices and project specifications to guarantee completion of work at the given time with quality of work that meets or even exceeds the clients expectations by implementing international quality standards plans and quality procedures in all the construction activities.</p><br> <br><br><u><b>Job Responsibilities 1</b></u> <br><p>Manage and oversees the quality and workmanship of every activity, thorough knowledge of all phases of engineering construction relating to Civil, Architectural and Structural discipline interfacing the multidisciplinary operations.</p><br> <p>Manage the QA/QC documents of the entire project including certificates, calibration, test results, inspection requests, non-compliance reports and site instruction/observations, permanent materials delivered and other QA/QC documents.</p><br> <p>Develop and determine all standards to perform inspection and tests on all procedures and oversee all testing methods and maintain high standards of quality for all processes.</p><br> <p>Follow the QA/QC Plans, Approved Method of Statements, Approved Test Plans and Approved Drawings during the project in order to meet the project quality requirements and client’s expectations.</p><br> <p>Ensure that all available Method Statements, ITPS and Drawings are approved and the last revision.</p><br> <p>Ensure that all approved Method statements, ITPs and Drawings are followed on sites.</p><br> <p>Ensure that all superseded documents are removed from the site.</p><br> <p>Prepare work inspection requests (WIR) for each construction activity and submits to consultant to ensure it covers all the construction activities done on site.</p><br> <br><br><u><b>Job Responsibilities 2</b></u> <br><p>Ensure that all site items are inspected properly thoroughly before calling the consultant for inspection.</p><br> <p>Ensure that work inspections are carried out as per the plans and advises the construction team for the corrections/corrective actions to avoid the rejection of work.</p><br> <p>Ensure that all drawings used in the inspection are approved and last revision.</p><br> <p>Ensures that 90% of work inspections shall be passing during the first submission.</p><br> <p>Conduct the quality tool box and method statements briefing for all the activities.</p><br> <p>Ensure that method statements briefing is carried out for each and every activity and records are maintained in the monthly Quality report.</p><br> <p>Ensure all incoming materials are checked as per the project specifications and approved material submittals.</p><br> <p>Ensure that all materials are inspected internally before offering inspection to the consultant, and before using in site.</p><br> <p>Raising an NCR to the supplier in case of rejecting any material delivered to site and keep the record of inspection in the monthly Quality report.</p><br> <br><br><b>Additional Responsibilities 3</b> <br><br><u><b>Job Knowledge &amp; Skills</b></u> <br><p>Knowledge of work related standards, specifications, and quality systems such as: ISO 9001, QCS, ASTM,</p><br> <p>BSI, BSEN, ACI and AASHTO.Have enough technical experience the QC issues. Ability to prioritize and</p><br> <p>multitasks as well as proactive and deadline-oriented. Ability to interact effectively in English. Ability to read</p><br> <p>drawings, specifications, standards , data sheets</p><br> <p>Proficient in computer applications and Systems such as</p><br> <p>Microsoft Office, Auto Cad, Primavera. Ability to supervise/execute whole sections of a Project with minimum</p><br> <p>management supervision.</p><br> <p>ERP knowledge preferably SAP functional skills are a requirement to be successful in this role.</p><br><br><br><u><b>Job Experience</b></u> <br><p>Minimum 8 year(s) working experience, 5 year(s) relevant working experience, 2 year (s) GCC is a plus</p><br><br><br><u><b>Competencies</b></u> <br>Resilience<br>AI Fluency<br>Quality<br>Leadership<br>Quality Assurance L3<br>QA Reviews and Inspections L3<br>Quality Control and Conformance L3<br>Standard Operating Procedures L3<br>Agility<br>QA Audits L3<br><br><br><u><b>Education</b></u> <br>Bachelor's Degree in Civil Engineering or Engineering<br>Professional Qualification in MMUP Engineer Registration (UPDA) or Lead Auditor certification (ISO 9001 or equal) or ASQC certification (CQM/CQE).<br><br><br><br> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> No experience required </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

<p>To manage, supervise, and ensure the successful execution of civil works in 380 kV substation projects (HV/MV), in compliance with Saudi Electricity Company (SEC) standards, contract requirements, safety, and quality guidelines.</p><p>Key Responsibilities:</p><ul><li>Supervise, monitor, and control all civil construction activities at the substation site, including foundations, control building, cable trenches, equipment foundations, roads, and fencing.</li><li>Ensure all works are executed in compliance with SEC standards, drawings, and specifications .</li><li>Review civil designs, drawings, and shop drawings and coordinate with engineering consultants/contractors for approvals.</li><li>Coordinate with project stakeholders (SEC representatives, consultants, contractors, and suppliers) for timely progress.</li><li>Plan and schedule civil construction activities to meet project timelines and milestones.</li><li>Monitor quality of materials and workmanship, conduct inspections, and ensure adherence to project QA/QC requirements.</li><li>Ensure strict compliance with health, safety, and environmental (HSE) standards at the project site.</li><li>Prepare and maintain project documentation such as daily progress reports, inspection requests, and material approvals.</li><li>Assist in resolving technical issues, variations, and claims related to civil works.</li><li>Support the Project Manager in progress meetings and provide input on civil work status and challenges.</li><li>Ensure timely completion and handover of civil works to enable installation of electrical equipment and overall substation commissioning.</li></ul><p>Key Competencies:</p><ul><li>Knowledge of substation civil construction practices.</li><li>Quality and safety management.</li><li>Stakeholder management (SEC/consultants/contractors).</li><li>Planning, scheduling, and execution skills.</li><li>Ability to work in a multicultural and challenging environment.</li></ul><p><strong>Desired Candidate Profile</strong></p><p>Experience in EPC Substation Projects within Saudi Arabia.</p><p>Exposure to SEC, National Grid SA, or major utility projects.</p><p>Strong track record in delivering substation civil works safely, within budget, and on schedule.</p><p>Immediate availability with SEC approval or transferable iqama will be an added advantage.</p>