وظائف مهندس تفتيش هندسي في السعودية

<p>Implement and monitor IMI’s HSE requirements across assigned shipyard zones/projects (operational and support areas) by maintaining a strong field presence, conducting inspections, verifying critical controls (PTW/JSA/TRA), intervening when unsafe conditions/acts are observed, and supporting supervisors and contractors to prevent incidents and maintain legal and IMI compliance.</p><p>KEY ACCOUNTABILITIES</p><p>Maintain continuous field presence and conduct planned (LPI Focused Inspections) and ad-hoc inspections in assigned areas (yard, quayside, workshops, vessel/structure work fronts) to identify hazards, verify controls, and stop unsafe work.</p><p>•Exercise stop-work authority when an imminent risk or serious breach is observed; ensure the area is made safe, promptly notify the responsible Supervisor/Foreman and the Operational Safety Supervisor, and support controlled restart only after corrective actions are implemented and verified.</p><p>•Verify the effective application of IMI’s Permit to Work (PTW) system and critical work controls (e.g., Hot Work, Confined Space Entry, LOTO, Working at Height, Lifting/Rigging) including permit accuracy, isolations, gas testing requirements, barriers, and worksite conditions.</p><p>•Confirm that risk assessments (JSA/TRA) are suitable and sufficient for the task and match site conditions; challenge and escalate where controls are missing, ineffective, or not understood by the work party.</p><p>•Monitor contractors and subcontractors for compliance with IMI HSE requirements and contractual obligations; issue observations/violations through the approved process and track close-out with the responsible line supervision.</p><p>•Report incidents, near misses, and unsafe conditions promptly and participate in investigations and root cause analysis; ensure corrective actions are clearly defined, assigned, and followed within agreed timeframes.</p><p>•Deliver toolbox talks, safety briefings, and on-the-job coaching to improve hazard awareness and strengthen safe behaviours; intervene and correct at-risk behaviours in real time.</p><p>•Support emergency preparedness by checking availability/condition of relevant emergency equipment in assigned areas and participating in drills and site emergency response activities as required.</p><p>•Maintain accurate and timely inspection records, observations, corrective action follow-up, and reports in accordance with IMI document control requirements and agreed reporting timelines.</p><ul><li><p>Work shifts/rosters as assigned and perform other HSE-related duties within competence as directed by the Operational Safety Supervisor to support safe execution of shipyard operations.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><p>High School Certificate or Diploma in Occupational Safety, Engineering, or related field.</p><p>NEBOSH IGC (Preferred)</p><p>•NEBOSH Process Safety Management (Preferred)</p><p>•OSHA 30 Hrs.</p><p>•IOSH</p><p>•First Aid / CPR</p><p>•Working at Height / Scaffolding Inspector</p><p>•Basic Lifting Equipment Inspection</p><p>Minimum 3–6 years of experience in industrial or construction safety.</p><p>•Strong knowledge of PTW, LOTO, Confined Space, Hot Work, Lifting, and Working at Height procedures.</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><span>Airbus is committed to providing reasonable accommodations as an Equal Opportunity Employer to applicants with disabilities. If you require assistance or an accommodation to complete your application, please contact us at USCareers@airbus.com</span></p><br><br><br><ul><li>Notice: Know Your Rights: Workplace Discrimination is Illegal</li><li>Notice: Pay Transparency Nondiscrimination (English)</li><li>Aviso: Transparencia en el Pago No Discriminación&nbsp;(Spanish)</li></ul><br><br><p><span><b><b>Job Description:</b></b></span></p><br><br>Job Description For External Posting<br><p><b>Airbus US Manufacturing Facility </b>is looking for an<b> NDT Level 2 Inspector (2nd Shift) </b>to join our Manufacturing department based in<b> Mobile, AL. </b></p><br><br><br><p>The breadth of exposure as an NDT Level II Inspector is immense, as the organization is responsible for a large diversity of inspection types across A220 and A320 programs. You have the ability to engage with the process to provide continuous improvement to complete the mission and to be part of Airbus’ strategy to enhance its global competitiveness by meeting the growing needs of its customers in the United States and beyond.</p><br><br><p><b>Meet the Team:</b></p><br><br><p>Our Engineers at the Airbus U.S. Manufacturing facility take our aircraft from concept to customer delivery – working with production teams on every aspect of assembly from managing technical information, quality control, maintenance tasks and health &amp; safety – along flowlines and flightlines. Join our team and watch our aircraft come to life.</p><br><br><br><p><b>Your Working Environment:</b></p><br><br><p>On ‘Airbus Way’ you will find the Airbus U.S. Manufacturing Facility for commercial aircraft. Opened at the Mobile Aeroplex at Brookley in 2015, the facility produces A320 Family aircraft and added a second product line for the A220 in 2019. The facility, which strengthens the U.S. aerospace industry, is part of Airbus’ strategy to enhance its global competitiveness by meeting the growing needs of its customers in the United States and beyond.</p><br><br><br><p><b>How We Care for You:</b></p><br><br><ul><li><p>Financial Rewards: Competitive base salary, incentive compensation which may include profit sharing schemes, retirement savings plan and the ability to participate in an Employee Stock Ownership Plan (“ESOP”)</p><br><br></li><li><p>Work/Life Balance: Paid time off including personal time, holidays and a generous paid parental leave program.</p><br><br></li><li><p>Health &amp; Welfare: Comprehensive insurance coverage including medical (traditional and high-deductible health plans), prescription, dental, vision, life, disability, Employee Assistance Plan (“EAP”) and other supplemental benefit coverages.&nbsp;</p><br><br></li><li><p>Individual Development: Upskilling and development opportunities through our global Leadership University, including unlimited access to 10,000+ e-learning courses focusing on ways to develop your employability, certifications, career path as well as the opportunity to participate in accelerated development programmes and both national and international mobility.</p><br><br></li></ul><br><b>Your challenges:</b><ul><li><p>Perform a large diversity of NDT inspections (ET, UT and PT) across A220 and A320 programs.</p><br><br></li><li><p>Interpret, evaluate, communicate, and report findings to production and engineering teams.</p><br><br></li><li><p>Interpret and review engineering drawings as required</p><br><br></li><li><p>Perform and/ or Support the development of NDT inspection techniques for complex geometries and confined spaces.</p><br><br></li><li><p>Assist in training and developing others within the team.</p><br><br></li><li><p>Conducts tests to resolve if parts meet quality specifications or specifying discontinuities.</p><br><br></li><li><p>Ensures strict alignment to safety laws.</p><br><br></li><li><p>Prepare the respective inspection reports, mappings and documents related to the inspection record.</p><br><br></li><li><p>Reviews production schedule and works to facilitate meeting schedules</p><br><br></li><li><p>Contribute to internal Quality Gates through on-time point closure</p><br><br></li><li><p>Report/advance team blocking points throughout the shift</p><br><br></li><li><p>Actively supply to department current KPI’s in order to drive improvements</p><br><br></li><li><p>Is an advocate for LEAN within group; encourages LEAN thinking and supports and assists in the implementation of LEAN initiatives/KAIZENS</p><br><br></li><li><p>Ensures all processes are followed</p><br><br></li></ul><b>Your boarding pass:</b><ul><li><p>An Associates' Degree in Aviation, Mechanical or Electrical Engineering or an equivalent combination of education and experience.&nbsp;</p><br><br></li><li><p>Experience utilizing testing equipment including maintenance and calibration of said equipment.&nbsp;</p><br><br></li><li><p>A minimum of 3 years' experience in setting up and conducting tests on parts and materials.</p><br><br></li><li><p>A minimum of 3 years' experience in setting up and conducting tests on parts and materials.</p><br><br></li><li><p>Non-Destructive Evaluation Level II certification meeting the minimum requirements of NAS410 / EN4179 Standards, in at least one of the following methods:</p><br><br></li><li><p>Eddy Current Testing (ET), Fluorescent Penetrant Testing (PT), or Ultrasonic Testing(UT)</p><br><br></li><li><p>Additional Non-Destructive Evaluation Level II certifications in meeting the minimum requirements of NAS410 / EN4179, in the following methods: Eddy Current Testing (ET), Fluorescent Penetrant Testing (PT), or Ultrasonic Testing (UT)</p><br><br></li><li><p>Experience performing NDT testing within the aerospace industry</p><br><br></li><li><p>Basic computer skills and familiarity with Microsoft applications including Word, PowerPoint, Excel, Google Suite etc.</p><br><br></li><li><p>Experience inspecting advanced materials such as high strength aluminum alloys, hardened steels, Inconel, titanium, steel (super alloys), Composite Carbon fiber parts and Honeycomb Composite parts.</p><br><br></li><li><p>Knowledge of AWS/ASME, ASTM standards, Aircraft Structural and Repair Manuals.</p><br><br></li><li><p>Hands on experience using portable digital equipment such as Olympus EPOCH 650, USM Go/USM Go+, NORTEC 600, Olympus 38DL+</p><br><br></li><li><p>An Associates' Degree in Aviation, Mechanical or Electrical Engineering or an equivalent combination of education and experience.</p><br><br></li><li><p>Experience utilizing testing equipment including maintenance and calibration of said equipment.</p><br><br></li><li><p>Preferred: 2+ years of relevant work experience within a manufacturing environment, preferably with an aviation company.</p><br><br></li></ul><br><p><b>Physical Requirements: </b></p><br><br><ul><li><p>Onsite 100%</p><br><br></li><li><p>Vision: able to see and read computer screen and other electronic equipment with screens, able to read documents, reports and engineering drawings.</p><br><br></li><li><p>Hearing: able to hear to participate in conversations in person and via teleconference or phone and to hear sounds on production floor including safety warnings or alarms.</p><br><br></li><li><p>Speaking: able to speak in conversations and meetings, deliver information and participate in communications.</p><br><br></li><li><p>Equipment Operation (personal computer, telephone, copies, fax machine, and related office equipment and using electronic identification card to enter building floors and internal doors): able to operate most office and</p><br><br></li><li><p>personal electronic equipment and some tools including production tools such as hydraulic lifts.</p><br><br></li><li><p>Carrying: able to carry documents, tools, drawings, electronic equipment up to 30lbs/14kgs.</p><br><br></li><li><p>Lifting: able to lift documents, tools, drawings, electronic equipment up to 30lbs/14kgs.</p><br><br></li><li><p>Pushing / Pulling: able to push and pull small office furniture and some equipment and tools.</p><br><br></li><li><p>Sitting: able to sit for long periods of time in meetings, working on computer.</p><br><br></li><li><p>Squatting / Kneeling: able to squat or kneel to retrieve or replace items stored on low shelving.</p><br><br></li><li><p>Standing: able to stand for discussions in offices or on production floor.</p><br><br></li><li><p>Travel: able to travel independently and at short notice.</p><br><br></li><li><p>Walking (include routine walking such as to a shared printer to retrieve documents): able to walk through office</p><br><br></li><li><p>and production areas including uneven surfaces.</p><br><br></li><li><p>Personal Protective Equipment required: Required PPE includes, but is not limited to, Safety Shoes, Safety</p><br><br></li><li><p>Glasses, Hearing Protection, Respirators/Masks, and/or Protective Gloves as required by site and/or customer site</p><br><br></li></ul><br><p><b>Eligibility:&nbsp;</b></p><br><br><ul><li><p>Eligible for employment in the US without sponsorship.&nbsp;</p><br><br></li></ul><br><p>A full job description will be provided to candidates who progress to the interview stage or any candidate upon request.</p><br><br><br><br><br><p>This job requires an awareness of any potential compliance risks and a commitment to act with integrity, as the foundation for the Company’s success, reputation and sustainable growth.</p><br><br><br><p><span><b><b><b><b>Company:</b></b></b></b></span></p><br><br>Airbus Americas, Inc.<br><p><b>Employment Type:</b></p><br><br>US - Direct Hire<br><p><b>Experience Level:</b></p><br><br>Professional<br><p><b>Remote Type:</b></p><br><br>On-site<br><p><b>Job Family:</b></p><br><br>Quality Inspection &lt;JF-QU-QC&gt;<p>------</p><br><br><p>------</p><br><br>Airbus provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetics, pregnancy, marital status, veteran status or other legally protected status. In addition to federal law requirements, Airbus complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, demotion, termination, layoff, recall, transfer, leaves of absence, compensation, benefits and training. Airbus expressly prohibits any form of workplace harassment based on race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetics, pregnancy, marital status, veteran status or other legally protected status. As a matter of policy, Airbus does not sponsor visas for US positions unless specified. Only applicants with current work authorization will be considered. Airbus does not offer tenured or guaranteed employment. Employment with Airbus is at will, meaning either the company or the employee can terminate the employment relationship at any time, with or without cause, with or without notice. Airbus reserves the right to revise or change job duties and responsibilities as the need arises. This position description does not constitute a written or implied contract of employment.<br><p>By submitting your CV or application you are consenting to Airbus using and storing information about you for monitoring purposes relating to your application or future employment. This information will only be used by Airbus.<br>Airbus is committed to achieving workforce diversity and creating an inclusive working environment. We welcome all applications irrespective of social and cultural background, age, gender, disability, sexual orientation or religious belief.</p><br><br><p><span>Airbus is, and always has been, committed to equal opportunities for all. As such, we will never ask for any type of monetary exchange in the frame of a recruitment process. Any impersonation of Airbus to do so should be reported to&nbsp;</span><span>emsom@airbus.com.</span></p><br><br><br> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> No experience required </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

<h3 >About the Electrician Role at Leylaty Group</h3> <p >Leylaty Group is seeking a dedicated and experienced <strong >Electrician</strong> to join its team in <strong >Jeddah</strong>. This full-time position is crucial for ensuring the safe and efficient operation of electrical systems across the group's diverse facilities, which include food and beverage establishments, hospitality operations, and wedding and event halls. The role requires a professional with 2-5 years of relevant experience.</p> <h3 >Role Purpose and Scope</h3> <p >The Electrician is responsible for the comprehensive management of electrical infrastructure, encompassing installation, inspection, maintenance, troubleshooting, and repair. This role ensures that all electrical installations and equipment within Leylaty Group's properties operate in full compliance with safety standards and applicable regulations, thereby supporting uninterrupted business operations and events.</p> <h3 >Key Responsibilities</h3> <ul > <li >Install, maintain, and repair electrical wiring, lighting systems, power distribution panels, switches, sockets, and various electrical equipment.</li> <li >Perform preventive and corrective maintenance on electrical systems across kitchens, restaurants, banquet halls, offices, storage areas, and other facilities.</li> <li >Diagnose electrical faults promptly and execute timely repairs to minimize operational downtime.</li> <li >Conduct regular inspections of electrical systems to ensure adherence to safety standards and local electrical codes.</li> <li >Maintain and repair emergency lighting systems, backup power systems, and electrical control panels.</li> <li >Provide electrical support for the setup and maintenance requirements of weddings, conferences, and special events.</li> <li >Coordinate effectively with other maintenance team members on repair and improvement projects.</li> <li >Maintain accurate records of maintenance activities, inspection reports, and work orders.</li> <li >Respond promptly to emergency maintenance requests during business operations and events.</li> <li >Ensure the proper use of electrical tools, equipment, and personal protective equipment (PPE).</li> <li >Adhere strictly to company health, safety, and food safety procedures at all times.</li> <li >Recommend improvements to enhance electrical system reliability and energy efficiency.</li> </ul> <h3 >Qualifications and Experience</h3> <ul > <li >2-5 years of proven experience as an Electrician in a relevant environment.</li> <li >Ability to work flexible hours, including evenings, weekends, and holidays, as operational needs require.</li> </ul> <h3 >Work Environment and Conditions</h3> <p >This full-time position is based in <strong >Jeddah</strong> and involves working across various Leylaty Group properties, including food and beverage outlets, hospitality venues, and event spaces. The role requires adaptability to different operational settings and a commitment to maintaining high standards of electrical safety and functionality.</p> <h3 >Application Process</h3> <p >Candidates interested in this Electrician role are encouraged to submit their applications. Further details regarding the application process will be provided upon inquiry.</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><span>Airbus is committed to providing reasonable accommodations as an Equal Opportunity Employer to applicants with disabilities. If you require assistance or an accommodation to complete your application, please contact us at USCareers@airbus.com</span></p><br><br><br><ul><li>Notice: Know Your Rights: Workplace Discrimination is Illegal</li><li>Notice: Pay Transparency Nondiscrimination (English)</li><li>Aviso: Transparencia en el Pago No Discriminación&nbsp;(Spanish)</li></ul><br><br><p><span><b><b>Job Description:</b></b></span></p><br><br><p><b><span>Airbus Commercial Aircraft is looking for a </span><b>PPV Leader</b><span> to join our </span><b>Manufacturing &amp; Quality Engineering</b><span> department based in </span><b>Mobile, Alabama</b><span>.</span></b></p><br><br><br><p><b><span>You will be part of a team developing </span><b>industrial process qualification and manufacturing system capability</b><span>. As part of the </span><b>Production Process Verification (PPV) team</b><span>, you will be involved in </span><b>evaluating manufacturing processes, tooling, and quality gates</b><span> aiming at </span><b>ensuring manufacturing systems are fully capable of serial production at scale to support industrial ramp-up</b><span>.</span></b></p><br><br><br><b><b>Meet the Team</b></b><p><b><span>Our Engineers at the Airbus U.S. Manufacturing facility take our aircraft from concept to customer delivery – working with production teams on every aspect of assembly from managing technical information, quality control, maintenance tasks and health &amp; safety – along flowlines and flightlines. Join our team and watch our aircraft come to life.</span></b></p><br><br><br><b><b>Your Working Environment</b></b><p><b><b>U.S. Assembly Facility</b></b></p><br><br><p><b><span>On ‘Airbus Way’ you will find the Airbus U.S. Manufacturing Facility for commercial aircraft. Opened at the Mobile Aeroplex at Brookley in 2015, the facility produces A320 Family aircraft and added a second product line for the A220 in 2019. The facility, which strengthens the U.S. aerospace industry, is part of Airbus’ strategy to enhance its global competitiveness by meeting the growing needs of its customers in the United States and beyond.</span></b></p><br><br><br><b><b>How We Care for You</b></b><ul><li><p><b><b>Financial Rewards:</b><span> Competitive base salary, incentive compensation which may include profit sharing schemes, retirement savings plan and the ability to participate in an Employee Stock Ownership Plan (“ESOP”).</span></b></p><br><br></li><li><p><b><b>Work/Life Balance:</b><span> Paid time off including personal time, holidays and a generous paid parental leave program.</span></b></p><br><br></li><li><p><b><b>Health &amp; Welfare:</b><span> Comprehensive insurance coverage including medical (traditional and high-deductible health plans), prescription, dental, vision, life, disability, Employee Assistance Plan (“EAP”) and other supplemental benefit coverages.</span></b></p><br><br></li><li><p><b><b>Individual Development:</b><span> Upskilling and development opportunities through our global Leadership University, including unlimited access to 10,000+ e-learning courses focusing on ways to develop your employability, certifications, career path as well as the opportunity to participate in accelerated development programmes and both national and international mobility.</span></b></p><br><br></li></ul><br><b><b>Your Challenges</b></b><ul><li><p><b><b>Industrial Process Qualification:</b><span> Serve as the designated PPV Leader (per A2715), coordinating technical reviews of manufacturing systems to prove they can repeatably produce conforming items in serial mode.</span></b></p><br><br></li><li><p><b><b>Evidence &amp; Readiness Validation:</b><span> Technical assessment of compliance evidence, ensuring Jigs &amp; Tools (J&amp;T) are qualified, Control/Inspection plans are active, and Measurement Systems Analysis (MSA) is completed.</span></b></p><br><br></li><li><p><b><b>First Article &amp; Routing Analysis:</b><span> Oversee First Article Inspections (FAI) to verify the as-built product matches Engineering Specifications, and analyze Routing Comparison Sheets for serial readiness.</span></b></p><br><br></li><li><p><b><b>Risk Mitigation &amp; Gap Resolution:</b><span> Track technical corrective actions, perform risk assessments on operational gaps, and drive project closure to ensure a smooth transition to full-rate production.</span></b></p><br><br></li><li><p><b><b>Multi-Functional Team (MFT) Support:</b><span> Act as a technical advisor to MFT stakeholders to resolve complex industrial risks and production readiness issues.</span></b></p><br><br></li></ul><br><b><b>Your Boarding Pass</b></b><ul><li><p><b><b>Professional Experience:</b><span> 3+ years of experience in an Engineering, Manufacturing, or Quality Control environment (New Product Introduction / Industrialization experience is highly preferred).</span></b></p><br><br></li><li><p><b><b>Technical Quality Core:</b><span> Hands-on experience with quality methodologies, including PFMEA, FAI, PPAP/APQP, and MSA.</span></b></p><br><br></li><li><p><b><b>Project Coordination:</b><span> Proven ability to manage multiple complex technical projects simultaneously under tight deadlines.</span></b></p><br><br></li><li><p><b><b>Systems &amp; Data Literacy:</b><span> Advanced proficiency in MS Office / Google Suite (Excel/Sheets); experience with ERP/PLM systems such as SAP is a plus.</span></b></p><br><br></li><li><p><b><b>Soft Skills &amp; Influence:</b><span> High degree of initiative with demonstrated ability to influence Multi-Functional Team (MFT) stakeholders without direct authority to resolve technical roadblocks.</span></b></p><br><br></li></ul><br><b><b>Physical Requirements</b></b><ul><li><p><b><span>Ability to work on-site in an active commercial aircraft manufacturing facility and final assembly line environment.</span></b></p><br><br></li><li><p><b><span>Capability to perform physical inspections of production tooling, equipment, Jigs &amp; Tools, and aircraft components.</span></b></p><br><br></li><li><p><b><span>Ability to navigate shop floor areas, flightlines, and technical offices as needed to support cross-functional teams.</span></b></p><br><br></li></ul><br><p>This job requires an awareness of any potential compliance risks and a commitment to act with integrity, as the foundation for the Company’s success, reputation and sustainable growth.</p><br><br><br><p><span><b><b><b><b>Company:</b></b></b></b></span></p><br><br>Airbus Americas, Inc.<br><p><b>Employment Type:</b></p><br><br>US - Direct Hire<br><p><b>Experience Level:</b></p><br><br>Professional<br><p><b>Remote Type:</b></p><br><br>On-site<br><p><b>Job Family:</b></p><br><br>Quality Management System &lt;JF-QU-QP&gt;<p>------</p><br><br><p>------</p><br><br>Airbus provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetics, pregnancy, marital status, veteran status or other legally protected status. In addition to federal law requirements, Airbus complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, demotion, termination, layoff, recall, transfer, leaves of absence, compensation, benefits and training. Airbus expressly prohibits any form of workplace harassment based on race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetics, pregnancy, marital status, veteran status or other legally protected status. As a matter of policy, Airbus does not sponsor visas for US positions unless specified. Only applicants with current work authorization will be considered. Airbus does not offer tenured or guaranteed employment. Employment with Airbus is at will, meaning either the company or the employee can terminate the employment relationship at any time, with or without cause, with or without notice. Airbus reserves the right to revise or change job duties and responsibilities as the need arises. This position description does not constitute a written or implied contract of employment.<br><p>By submitting your CV or application you are consenting to Airbus using and storing information about you for monitoring purposes relating to your application or future employment. This information will only be used by Airbus.<br>Airbus is committed to achieving workforce diversity and creating an inclusive working environment. We welcome all applications irrespective of social and cultural background, age, gender, disability, sexual orientation or religious belief.</p><br><br><p><span>Airbus is, and always has been, committed to equal opportunities for all. As such, we will never ask for any type of monetary exchange in the frame of a recruitment process. Any impersonation of Airbus to do so should be reported to&nbsp;</span><span>emsom@airbus.com.</span></p><br><br><br> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> No experience required </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Responsible for ensuring the workplace and project sites are compliant with health, safety, and environmental regulations, conducting audits, and promoting safety culture. Responsible for implementing Safety Policies, auditing and inspection. Ensure that everyone act in accordance with laws, Monitor and stay updated on safety regulations, codes and standards applicable to projects under progress. Maintain accurate records and documentation for safety inspections, incidents and training. Assess workplace hazards and risks and recommend appropriate measures to mitigate them.</p></div></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Creating and implementing landscape plans, including plant selection, hardscape design, and irrigation systems. Overseeing routine maintenance tasks such as mowing, pruning, and weeding, as well as addressing repairs to hardscape elements and irrigation systems. Promoting environmentally friendly practices, such as using native plants and conserving water. Ensuring adherence to safety regulations and best practices in all landscape operations. Checking and reviewing technical submittments to client which Submit site daily reports, inspection requests, estimates and all applicable monitoring</p></div></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Receives wiring diagrams, drawings, specifications, and instructions either verbally or in writing, concerning emergency or scheduled repair, installation, and inspection work to be performed. Plan and performs work requiring a thorough knowledge electrical and mechanical theory and principles, wiring specifications, local and national electric codes, properties of various materials and principles of operation and application of generator systems. Services generator systems by checking, testing, and replacing faulty components, circuit modules, printed circuit boards, and similar</p></div></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Receives wiring diagrams, drawings, specifications, and instructions either verbally or in writing, concerning emergency or scheduled repair, installation, and inspection work to be performed. Plan and performs work requiring a thorough knowledge electrical and mechanical theory and principles, wiring specifications, local and national electric codes, properties of various materials and principles of operation and application of generator systems. Services generator systems by checking, testing, and replacing faulty components, circuit modules, printed circuit boards, and similar</p></div></section>

CNC Machinist<br><br>Job Type: Contractor<br><br>Location: Remote<br><br>Job Overview<br><br>We are seeking experienced CNC Machinists to support a project focused on advanced part production and process optimization. You will provide expertise in CNC machine setup, operation, precision measurement, blueprint interpretation, and machining troubleshooting.<br><br>No Prior AI Experience Is Required.<br><br>Key Responsibilities<br><br>Set up and operate hobbyist and industrial CNC machines, including Haas systems. Load and verify CNC programs, install tooling, configure work-holding, and set work offsets. Run first-piece inspections and adjust setups for dimensional accuracy. Troubleshoot issues such as tool wear, chatter, and dimensional variation. Use calipers, micrometers, indicators, and CMMs for precision inspection. Interpret engineering drawings, GD&T, and manufacturing documentation. Provide feedback on machining processes, setups, and manufacturability. Perform routine machine maintenance and maintain a safe workspace. <br><br>Required Qualifications<br><br>5+ years of hands-on CNC machining experience in setup and production. Strong experience with Haas CNC controls, including VF-series machines. Familiarity with hobbyist CNC platforms such as Makera Carvera preferred. Strong blueprint reading and GD&T interpretation skills. Experience with precision measurement tools. Experience machining various metals and plastics. Strong troubleshooting and process optimization skills. Good written and verbal English communication skills.