وظائف مهندس تفتيش هندسي في السعودية

Role Summary: The Mechanical Quality Engineer (Piping, Welding, Coating & NDT) is responsible for assuring and controlling the quality of piping fabrication and installation, welded joints, protective coating systems, and non-destructive testing activities for the JESCO / Arcelor Mittal Tubular Products Al-Jubail Heat Treatment and Finishing Line Project. The role provides owner-side surveillance of EPC contractors, subcontractors, vendors, and third-party inspection agencies from material receipt and fabrication through erection, testing, pre-commissioning, turnover, and final dossier close-out. The incumbent ensures compliance with approved project specifications, drawings, Inspection and Test Plans, welding and coating procedures, applicable Saudi requirements, and relevant ASME, API, ASTM, AWS, ISO, SSPC/AMPP, and ASNT standards.<br>Job Duties & Responsibilities:Review and approve contractor quality documents, including Project Quality Plans, Inspection and Test Plans, method statements, field inspection checklists, welding procedure specifications and qualification records, NDT procedures, coating procedures, pressure-test packages, and turnover dossiers. Perform surveillance and inspection of shop and field piping activities, including material receiving, identification and traceability, storage and preservation, fit-up, joint preparation, welding, supports, flange alignment, bolt tightening, cleanliness, reinstatement, and system completion. Verify piping materials, fittings, flanges, valves, gaskets, welding consumables, and coating materials against approved drawings, specifications, purchase orders, material requisitions, MTCs, heat numbers, and positive material identification requirements. Witness and verify welder and welding-operator qualifications, WPS/PQR compliance, welding consumable control, preheat and inter pass temperature, heat input, joint sequencing, visual inspection, weld repair, and post-weld heat treatment activities where applicable. Coordinate and monitor NDT activities, including VT, PT, MT, UT, RT, and advanced methods when specified; verify technician certification, equipment calibration, technique sheets, examination coverage, acceptance criteria, reports, film or digital-image quality, and repair-cycle closure. Inspect surface preparation and coating application, including environmental conditions, abrasive and coating batch control, surface cleanliness and profile, stripe coating, wet and dry film thickness, holiday testing, adhesion testing, curing, repair, and final acceptance in accordance with the approved coating system. Witness piping pressure and leak testing, line flushing or blowing, drying, chemical cleaning where applicable, valve testing, punch-list clearance, and reinstatement; confirm calibrated test instruments, test boundaries, temporary supports, safety controls, and complete test records. Review isometric drawings, P&IDs, line lists, plot plans, weld maps, spool drawings, support details, vendor drawings, specifications, and approved technical queries to confirm construction and inspection compliance. Raise inspection observations and Non-Conformance Reports for deviations; support root-cause analysis, corrective and preventive actions, concession or repair review, verification of implementation, and timely close-out. Maintain inspection status, weld and NDT traceability, coating records, NCR and punch-list logs, quality KPIs, and weekly progress reports; identify recurring defects and recommend preventive improvement actions. Coordinate with Project Management, Engineering, Construction, HSE, Operations, EPC contractors, vendors, authorized inspectors, and third-party agencies to resolve quality issues without compromising safety, code compliance, or project schedule. Support mechanical completion, system handover, pre-commissioning, and final quality dossier review, ensuring all records are complete, legible, traceable, approved, and aligned with the project turnover index.<br>Education & Experience:Bachelor’s degree in mechanical engineering or equivalent discipline Minimum 8-10 years of QA/QC experience in piping, welding, coating, and NDT for industrial construction, steel, oil and gas, petrochemical, power, or process-plant projects. At least 3 years in an owner, client, PMC, or lead site-quality role supervising EPC contractors, subcontractors, and third-party inspection agencies. Demonstrated field experience with carbon steel, stainless steel, and alloy-steel piping fabrication and installation, welding control, NDT coordination, coating inspection, pressure testing, and turnover documentation. Experience reviewing and implementing ITPs, WPS/PQRs, welder qualifications, NDT procedures, coating procedures, inspection requests, test packs, NCRs, punch lists, and final manufacturing or construction dossiers. Experience on Heat Treatment and Finishing Line, steelmaking, pipe manufacturing, or comparable heavy-industrial projects is preferred; Saudi Arabia or GCC project experience is an advantage.<br>Skills:Excellent technical knowledge and quality-control skills Strong leadership and contractor-management abilities Effective communication, reporting, and coordination skills Strong analytical, problem-solving, and decision-making abilities Good planning, organization, teamwork, and time-management skills

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Manage FM projects, site engineering, fit-out, renovation, finishing works, and infrastructure improvements across Wa'ad Al Shamal and Jalamid, delivering safely within approved scope, quality, timeline, and budget.</p><br><p><strong>KEY RESPONSIBILITIES</strong></p><ul><li><p>Manage site engineering for renovation, fit-out, finishing, civil improvements, and facility upgrades.</p></li><li><p>Review scope, drawings, BOQs, specifications, method statements, schedules, and contractor submissions.</p></li><li><p>Supervise site execution against approved scope, quality standards, and Maaden safety requirements.</p></li><li><p>Coordinate with end users, FM, EHSS, Engineering, Procurement, Operations, and contractors.</p></li><li><p>Monitor progress, quality, risks, materials, manpower, and contractor productivity.</p></li><li><p>Conduct inspections, prepare snag lists, close corrective actions, and ensure proper handover.</p></li><li><p>Ensure permits, access approvals, isolations, and lifting plans are secured before execution.</p></li><li><p>Prepare progress reports, dashboards, cost updates, risk logs, and completion reports.</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>Bachelor degree in Civil, Architectural, Mechanical, Electrical Engineering, or Construction Management.</p></li><li><p>7–10 years in project or site engineering, renovation, fit-out, finishing, or construction supervision.</p></li><li><p>Experience in industrial, mining, large residential, or multi-site FM environments preferred.</p></li><li><p>Strong knowledge of civil works, finishing, MEP coordination, BOQ review, QC, and project handover.</p></li><li><p>Good understanding of Saudi Building Code, HSE, permit-to-work, and site execution controls.</p></li><li><p>Familiarity with MS Project, Primavera, AutoCAD, CAFM, or CMMS is preferred.</p></li><li><p>Ability to work with Arabic- and English-speaking stakeholders; English proficiency (IELTS 5.0 or equivalent).</p></li></ul><br><p><strong>REPORTING AND DELIVERABLES</strong> Weekly operational updates with risks and action plans; monthly KPI and contractor performance scorecards; inspection records and corrective action trackers; improvement initiatives log; and clear escalation of items affecting safety, cost, service continuity, or end-user satisfaction. </p><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <br><p>SYSTRA is one of the world's leading engineering and consultancy groups specialising in public transport and sustainable mobility. With over 10,300 employees, SYSTRA's mission is to design safe and sustainable transport solutions to bring people together, develop social inclusion and facilitate access to employment, education and leisure throughout the world.</p><br><br><p>For 65 years, the Group has been working alongside cities and regions to contribute to their development by creating, improving and modernising their infrastructure and transport systems, throughout the life cycle of their projects. SYSTRA is involved from the earliest stages of design through to the testing, deployment and maintenance phases. The company provides all its services in over 80 countries worldwide and generates 74% of its turnover internationally. With its new services, SYSTRA supports its clients and partners in their digital, ecological and energy transition, in order to invent the mobility of tomorrow.</p><br><br> Context <br><p><span><span>SYSTRA’s Mobility &amp; Railway Business Unit is anticipating future growth, with new metro projects. To support these potential opportunities, we are looking for an experienced <strong><span>Deputy Resident Engineer (Civil) </span></strong>to join our project teams and contribute to our mobility solutions.&nbsp;&nbsp;</span></span></p><br><br><p><span><span>The Mechanical Engineer will p</span></span>rovide engineering and technical support for all mechanical works performed on site therefore, SYSTRA is looking for <strong><span>Deputy Resident Engineer (Civil)</span></strong>&nbsp;to join our team to be based at Riyadh , Saudi Arabia.</p><br><br> Missions/Main Duties <br><ul><li>Lead a multidisciplinary team of engineers and inspectors across civil, mechanical, electrical, and architectural disciplines.</li><li>Monitor and coordinate contractor activities within the assigned rail project area to ensure safe and efficient project delivery.</li><li>Develop discipline-specific construction schedules and monitor progress against project milestones.</li><li>Provide schedule updates, progress assessments, and reporting to the Construction Manager.</li><li>Monitor material procurement, delivery, and availability to ensure construction activities remain on schedule.</li><li>Verify that delivered materials comply with project specifications, quality requirements, and industry standards.</li><li>Maintain first-level quality assurance oversight to ensure all installation works are executed in accordance with approved plans, specifications, and applicable standards.</li><li>Supervise construction engineering activities and provide technical expertise across one or more construction disciplines.</li><li>Ensure that inspections and testing activities are conducted, witnessed, documented, and completed in accordance with approved procedures.</li><li>Collaborate with construction management teams to identify and mitigate safety, environmental, and operational risks.</li><li>Promote safe work practices and ensure compliance with site-specific safety requirements and industry standards.</li><li>Coordinate with design engineering teams to support construction activities and resolve technical issues.</li><li>Review and interpret design drawings and specifications to ensure work is executed in accordance with the latest approved revisions.</li><li>Provide technical solutions to engineering and construction challenges and coordinate implementation with project stakeholders.</li><li>Maintain project records, progress reports, back-charge documentation, and other project controls documentation as required.</li><li>Coordinate and organize project documentation for final handover and project closeout activities.</li><li>Interface with clients, contractors, and senior management to support successful project execution.</li></ul> Profile/Skills <br><ul><li>Bachelor’s Degree in Engineering, Construction Management, or a related field.</li><li>Minimum 8 years of post-graduate experience on major civil or infrastructure projects.</li><li>Experience on rail, metro, transit, or related transportation projects.</li><li>Proven experience leading and managing multidisciplinary engineering and construction teams.</li><li>Strong problem-solving, coordination, and organizational skills.</li><li>Experience with construction materials testing and quality assurance, including soil, concrete, grout, dewatering, and load testing activities.</li><li>Strong understanding of construction planning, material delivery, staging, scheduling, and site coordination.</li><li>Knowledge of construction quality, safety, and compliance requirements.</li><li>Excellent communication and stakeholder management skills.</li></ul> <br><p>Systra is an equal opportunities company; this position is open to all applicants.</p><br><br> Workplace Type <p>..</p><br><br> <br> Why SYSTRA? Read more <span> sur Why SYSTRA?</span> <br> <br> <br> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> No experience required </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

MEP Engineer – Facilities Management Advisory Location: King Salman Energy Park (SPARK), Eastern Province, Saudi Arabia Employment Type: Full-time<br>Position Summary King Salman Energy Park (SPARK) is a premier industrial ecosystem supporting the region’s energy and manufacturing sectors. As part of SPARK’s commitment to operational excellence and sustainable infrastructure, the MEP Engineer plays a key role in ensuring the reliability, efficiency, and compliance of mechanical, electrical, and plumbing systems across the park. This position will support the inspection, maintenance, and performance optimization of MEP systems within both building and infrastructure assets, including tenant facilities, substations, pumping stations, utility corridors, and common areas. The MEP Engineer will work closely with senior engineers, FM teams, and service providers to maintain high operational standards and system integrity.<br>Key Responsibilities1. MEP Systems Support (Infrastructure & Building Assets) Monitor the performance and operational status of MEP systems including HVAC, water supply, drainage, fire protection, lighting, power distribution, and pumping stations. Conduct site inspections and support maintenance activities for MEP systems across both infrastructure and building facilities. Participate in the troubleshooting, fault analysis, and resolution of MEP-related technical issues. Support the review of method statements, risk assessments, and maintenance procedures submitted by contractors. Ensure building MEP systems are maintained according to required specifications, tenant guidelines, and health and safety standards. Support the technical review and commissioning of new MEP installations or refurbished systems.2. Preventive & Corrective Maintenance Coordination Assist in implementing preventive and corrective maintenance schedules for MEP systems in coordination with O&M contractors. Conduct field verification of maintenance activities to ensure alignment with SLAs and technical standards. Maintain records of completed works, service reports, and contractor performance. Monitor spare parts usage and support timely identification of required materials. Coordinate with FM teams to minimize downtime and ensure timely resolution of urgent issues.3. Utilities Performance Monitoring Assist in tracking consumption data for utilities such as electricity, water, and chilled water across MEP systems. Identify abnormal usage trends and report potential inefficiencies or faults. Support the implementation of energy efficiency measures and corrective actions. Work with sustainability teams to improve performance through data-driven insights and technical adjustments.4. Compliance & Safety Ensure all MEP activities are performed in compliance with local regulations, SPARK standards, and international codes (e.g., SBC, ASHRAE, NFPA, NEC, IEC). Participate in safety inspections and enforce compliance with HSE protocols during site activities. Assist with documentation and audits related to safety and regulatory compliance.5. Contractor & Vendor Coordination Liaise with external contractors and vendors to support ongoing MEP maintenance works and service delivery. Monitor contractor performance and ensure compliance with contractual obligations, timelines, and quality expectations. Provide site-level coordination during minor works, equipment replacements, and system upgrades.6. Technical Documentation & Reporting Maintain up-to-date MEP documentation, including drawings, asset registers, test reports, and maintenance logs. Assist in preparing technical reports, condition assessments, and recommendations for system improvements. Support the integration of MEP asset data into CAFM/CMMS platforms for centralized monitoring and tracking.<br>Qualifications & Experience Bachelor’s degree in Mechanical or Electrical Engineering (or related field).4–7 years of experience in MEP operations, maintenance, or technical support—preferably in industrial parks, large-scale developments, or infrastructure projects. Strong knowledge of MEP systems for both buildings and infrastructure (e.g., utility corridors, substations, pump stations). Familiarity with international and local codes and standards (SBC, ASHRAE, NFPA, NEC, IEC). Experience using CAFM/CMMS platforms for asset and work order management is preferred. Previous experience in the GCC region is an advantage.<br>Key Skills & Attributes Technical Proficiency: Solid understanding of MEP systems, their operation, and typical fault conditions. Problem Solving: Able to respond to system failures and maintenance issues quickly and efficiently. Attention to Detail: Strong focus on system compliance, documentation accuracy, and service quality. Teamwork: Able to collaborate with internal teams, contractors, and stakeholders to support joint goals. Communication: Clear reporting and coordination with field teams, vendors, and engineering supervisors. Safety Awareness: Strong commitment to HSE and regulatory compliance during operations and inspections.<br>Reporting Line Reports To:Senior MEP Engineer<br>Collaborates With Internal Stakeholders:Facilities Management Utilities and Sustainability Teams Engineering and Projects HSE and Compliance Procurement and Vendor Management External Stakeholders:O&M contractors and service providers Engineering consultants Utility suppliers Regulatory bodies (for inspections and compliance matters)<br>All interested applicants can also email their CVs to careers.escl@dhowsolutions.com with a subject line of “MEP Engineer-Saudi National” mentioning their availability.

The Senior Electrical Engineer is responsible for the technical delivery, coordination, and constructability of all electrical works within the Design & Build project, including power distribution, lighting, ELV systems, and associated infrastructure. <br>Reporting to the MEPF Design / Technical Manager, the role ensures that all electrical design and construction activities are aligned with contract requirements, authority regulations, program constraints, safety standards, and site execution needs. <br>The role acts as the discipline lead for electrical works, responsible for reviewing and approving design outputs, supporting construction delivery, resolving technical issues, and ensuring that design intent is effectively translated into buildable, coordinated, and high-quality site execution. <br>DUTIES PREFORMED % of Time Key Accountabilities Key Activities 20% Design Review, Coordination & Constructability Review and approve electrical design outputs including drawings, models, specifications, shop drawings, and technical submissions. Ensure compliance with Employer’s Requirements, contract documents, codes, standards, and authority regulations. Identify and resolve design clashes, constructability issues, and interface risks across disciplines. Ensure full coordination of electrical systems with architectural, structural, mechanical, and other building systems. Validate buildability, safety, system performance, and operational suitability of electrical installations. 25% Site & Construction Support (Electrical) Provide day-to-day electrical engineering leadership on site, addressing RFIs, technical queries, and construction challenges. Review electrical works (power, lighting, ELV, earthing, containment systems) to verify compliance with approved drawings and specifications. Identify and resolve site issues, deviations, and non-conformances in coordination with project teams. Coordinate electrical activities with other disciplines to avoid clashes and execution conflicts. Support inspections, testing, commissioning, and quality assurance of electrical systems. Provide technical direction and input to resolve site issues and maintain construction progress. 20% Shop Drawings, Submittals & As-Built Management Review electrical shop drawings, material submittals, and method statements for compliance with design intent. Provide clear, coordinated, and timely technical comments to support approvals and construction progress. Verify that approved drawings and materials are correctly implemented on site. Oversee preparation, review, and validation of electrical as-built drawings and records. Support tracking and close-out of submittals and technical comments. 15% Technical Queries, RFIs & NCR Management Lead responses to RFIs, Technical Queries (TQs), and site clarifications related to electrical works. Oversee investigation, reporting, and close-out of NCRs and quality issues. Propose practical, buildable electrical solutions to site challenges. Maintain accurate records of technical decisions and communications. 15% Design Management & Stakeholder Coordination Support planning and monitoring of electrical design deliverables in line with project program requirements. Coordinate with consultants, subcontractors, and internal teams to ensure timely delivery of design information. Represent the electrical discipline in meetings with clients, consultants, and authorities. Escalate risks and critical issues with clear technical recommendations. 10% Continuous Improvement & Knowledge Sharing Contribute to lessons learned related to electrical systems, constructability, and project delivery. Provide mentoring and technical guidance to electrical engineers and site staff. Promote best practices in electrical construction quality, safety, and execution. <br><br>WORK CONTACTS Internal External MEPF Design/ Technical Manager Lead Design Consultant (Electrical) – as required Senior Design Manager Subconsultants Technical Director Electrical Subcontractors Discipline Engineers (Architectural, Structural, Mechanical) Vendors / Suppliers Technical Coordinators Client / PMC Representatives Construction / Operations Team Authorities Having Jurisdiction (AHJs) BIM Team <br>Procurement Team <br>QA/QC Team <br>Document Control Team <br><br>WORKING CONDITIONS Working Environment Site office Degree of Risk - Physical Low to Medium Risk <br>JOB SPECIFICATIONS Industry / Domain Design & Build engineering projects within the construction industry. Multidisciplinary engineering coordination across design and site delivery stages. Necessary Knowledge and Experience Minimum 10–12 years of relevant engineering experience within design, construction, or Design & Build project environments. Demonstrated experience coordinating multidisciplinary engineering deliverables, including design drawings, shop drawings, and technical submissions. Sound working knowledge of building systems and discipline interfaces (architectural, structural, mechanical, electrical). ‘Proficient’ in technical documentation, review workflows, and engineering coordination processes. Strong professional proficiency in English, written and spoken. Education and Certification Minimum Requirements Bachelor’s degree in engineering (Electrical) Master’s degree is an advantage. Professional or engineering certification/licensing is an advantage but not mandatory. Job Specific and Technical Skills Proficient in engineering and design software (e.g. Auto CAD, Revit, BIM coordination tools). Strong understanding of design coordination, constructability, and design-to-construction workflows. Ability to manage technical logs, trackers, and document control systems within a CDE environment. Strong analytical and problem-solving skills with attention to detail and technical accuracy. Effective communication and coordination skills to support collaboration across engineering disciplines and project teams.

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>We are seeking a skilled and experienced Mechanical Engineer (Irrigation &amp; Pumping) to join our team. The Mechanical Engineer will be responsible for supporting the design review, planning, supervision, and execution of irrigation systems, pumping stations, and mechanical infrastructure works, ensuring adherence to engineering standards, safety protocols, and project timelines. The ideal candidate will possess strong technical expertise in pumping systems, irrigation networks, mechanical equipment, and construction supervision.</p><br><p><strong>Responsibilities</strong>: </p><p>Review shop drawings, mechanical layouts, material submittals, method statements, ITPs, equipment datasheets, and as-built documentation. Inspect installation of pumps, valves, piping, supports, irrigation networks, mechanical equipment, and associated infrastructure elements. Verify mechanical works against approved drawings, specifications, quality requirements, safety standards, and manufacturer recommendations. Coordinate with contractors, engineers, QA/QC teams, commissioning teams, and other disciplines to resolve site issues and interfaces. Support pressure testing, pump testing, commissioning, functional checks, snagging, and handover activities. Review testing records, inspection checklists, punch lists, O&amp;M documentation, and final close-out submissions. Prepare inspection reports, site observations, technical comments, and progress updates. Support risk identification and corrective actions related to installation, testing, and commissioning activities.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p> Bachelor's degree in Mechanical Engineering, Electromechanical Engineering, or a related field. Proven work experience of at least 5 to 7 years in irrigation systems, pumping stations, mechanical works, and construction supervision. Good knowledge of pumping systems, irrigation networks, valves, piping, pressure testing, mechanical equipment, and commissioning requirements. Proficiency in using CAD software, pump selection tools, hydraulic calculation tools, and Microsoft Office applications. Strong analytical and problem-solving skills, with the ability to review submittals, technical documents, and testing records. Excellent coordination and communication skills with contractors, engineers, QA/QC teams, and project stakeholders. Construction and supervision of pumping and irrigation works, preferably fluent in Arabic and English (spoken and written). </p><p></p></section>

Job Title: Structural Engineer IILocation: Saudi Arabia<br>DUTIES PREFORMED Key Accountabilities & Key Activities Site & Construction Support (Structural) Provide day-to-day structural engineering support on site, addressing construction queries, RFIs, and technical clarifications. Review structural works on site to verify compliance with approved drawings, specifications, mock-ups, and samples. Identify structural site issues, deviations, or non-conformances and support their resolution in coordination with the Senior Structural Engineer. Coordinate structural activities with architectural MEPF, façade, and fit-out works to avoid clashes and execution conflicts. Support snagging, inspections, and quality reviews of structural works and finishes. Shop Drawings, Submittals & As-Built Support Review structural shop drawings, material submittals, samples, and method statements for compliance with approved design intent and specifications. Provide clear technical comments to support timely approvals and construction progress. Verify that approved shop drawings and materials are correctly implemented on site. Support the preparation, review, and validation of structural as-built drawings and records. Assist Technical Coordinators in tracking structural submittals and closing out review comments. Technical Queries, RFIs & NCR Management Prepare and support responses to RFIs, Technical Queries (TQs), and site clarifications related to structural works. Assist in the investigation, reporting, and close-out of structural NCRs, observations, and quality issues. Maintain accurate records of technical responses and site-related decisions in accordance with project procedures. Coordination & Communication Coordinate with site engineers, supervisors, subcontractors, and suppliers on structural matters. Attend site coordination meetings and progress reviews as required. Ensure structural technical information is clearly communicated through approved project workflows. Continuous Improvement & Knowledge Sharing Contribute to lessons learned related to structural detailing, constructability, and site execution. Support mentoring and technical guidance of junior engineers and site staff. Promote best practices in structural construction quality and execution..<br>JOB SPECIFICATIONS:Industry / Domain Design & Build engineering projects within the construction industry. Multidisciplinary engineering coordination across design and site delivery stages. Design of structures for either Design and Build Contractor or Large International Design Consultancy Necessary Knowledge and Experience Minimum 8 years of relevant engineering experience within design, construction, or Design & Build project environments. Demonstrated experience coordinating multidisciplinary engineering deliverables, including design drawings, shop drawings, and technical submissions. Sound working knowledge of building systems and discipline interfaces (architectural, structural, mechanical, electrical).‘Proficient’ in technical documentation, review workflows, and engineering coordination processes. Strong professional proficiency in English, written and spoken. Education and Certification Minimum Requirements Bachelor’s degree in Engineering (Structural) Master’s degree is an advantage. Professional or engineering certification/licensing is an advantage but not mandatory. Job Specific and Technical Skills Proficient in engineering and design software (e.g. Auto CAD, Revit, BIM coordination tools). Strong understanding of design coordination, constructability, and design-to-construction workflows. Ability to manage technical logs, trackers, and document control systems within a CDE environment. Strong analytical and problem-solving skills with attention to detail and technical accuracy. Effective communication and coordination skills to support collaboration across engineering disciplines and project teams.

<div dir="rtl"><h3 >نبذة عن الوظيفة</h3> <p >تبحث شركة الانشاءات المتقدمة للاستشارات الهندسية عن <strong >مهندس كهربائي</strong> للانضمام إلى فريقها في <strong >جدة</strong>، <strong >مكة المكرمة</strong>. يتضمن هذا الدور بدوام كامل إعداد وتطوير النماذج والرسومات الكهربائية باستخدام Autodesk Revit، والمشاركة في إعداد ومراجعة المخططات التنفيذية لأنظمة القوى والإنارة والتيار الخفيف. سيعمل المهندس ضمن فريق هندسي متعدد التخصصات في أحد المشاريع الكبرى، وستكون هذه الفرصة مناسبة للمرشحين ذوي الخبرة من <strong >0 إلى 1 سنة</strong>.</p> <h3 >المهام والمسؤوليات الرئيسية</h3> <ul > <li >إعداد وتحديث النماذج والرسومات الكهربائية باستخدام Autodesk Revit.</li> <li >المساهمة في إعداد ومراجعة المخططات التنفيذية للأنظمة الكهربائية وأنظمة التيار الخفيف.</li> <li >استخدام Autodesk Navisworks في مراجعة النماذج وكشف التعارضات ومتابعة معالجتها.</li> <li >قراءة المخططات والمواصفات والتعليمات الفنية وتنفيذ الملاحظات المطلوبة.</li> <li >إعداد وتنظيم Views وSheets وSchedules والتفاصيل الهندسية.</li> <li >التنسيق مع فرق العمارة والإنشاء والميكانيكا وبقية التخصصات الهندسية.</li> <li >تحديث النماذج والرسومات وفق التعديلات والملاحظات المعتمدة.</li> <li >الالتزام بمعايير الجودة وإجراءات إعداد ومراجعة وتسليم الأعمال.</li> <li >تنظيم المهام والالتزام بالبرنامج الزمني ومواعيد التسليم.</li> <li >المشاركة في الاجتماعات الفنية وبرامج التدريب والتطوير.</li> <li >إعداد الوثائق والتقارير الفنية المتعلقة بالأعمال المنفذة.</li> </ul> <h3 >المتطلبات الأساسية</h3> <ul > <li >خبرة عملية تتراوح من <strong >0 إلى 1 سنة</strong> في مجال الهندسة الكهربائية.</li> <li >إتقان استخدام برامج <strong >Autodesk Revit</strong> و <strong >Autodesk Navisworks</strong>.</li> <li >القدرة على اجتياز اختبار فني عملي إلزامي في برامج Autodesk Revit و Navisworks.</li> </ul> <h3 >المهارات والكفاءات</h3> <ul > <li >مهارات قوية في قراءة وتحليل المخططات والمواصفات الفنية.</li> <li >القدرة على التنسيق الفعال مع الفرق الهندسية المختلفة.</li> <li >الالتزام بمعايير الجودة وإجراءات العمل المحددة.</li> <li >مهارات تنظيمية ممتازة والقدرة على الالتزام بالمواعيد النهائية.</li> <li >القدرة على إعداد الوثائق والتقارير الفنية بدقة ووضوح.</li> </ul> <h3 >بيئة العمل</h3> <p >يعمل المهندس الكهربائي ضمن <strong >فريق هندسي متعدد التخصصات</strong> في مشروع كبير بمدينة جدة. تتطلب بيئة العمل هذه التعاون والتنسيق المستمر مع مختلف الأقسام لضمان سير العمل بكفاءة وتحقيق أهداف المشروع.</p> <h3 >معلومات إضافية</h3> <p >هذه الوظيفة بدوام كامل في <strong >جدة</strong>، <strong >مكة المكرمة</strong>. لم يتم الكشف عن تفاصيل الراتب لهذه الفرصة.</p></div>

<h3 >About Parsons Corporation</h3> <p >Parsons Corporation is seeking a <strong >Mechanical Engineer</strong> to join its team in Riyadh, Saudi Arabia. This is a full-time position that contributes to the delivery of significant airport, aviation, and infrastructure projects. The company fosters an innovative culture focused on valuing people, embracing agility, and promoting professional growth.</p> <h3 >Role Overview</h3> <p >The <strong >Mechanical Engineer</strong> will provide essential technical engineering support across various project phases, including design, coordination, construction, testing, commissioning, and handover of mechanical systems. This role involves close collaboration with multidisciplinary engineering teams, contractors, consultants, and vendors to ensure all mechanical works comply with approved designs, project specifications, applicable codes, and client requirements.</p> <h3 >Key Responsibilities</h3> <ul > <li >Review and coordinate mechanical engineering activities across aviation and infrastructure project packages.</li> <li >Analyze mechanical drawings, specifications, calculations, equipment schedules, and technical reports.</li> <li >Coordinate mechanical interfaces with Civil, Structural, Electrical, Instrumentation, Fire &amp; Life Safety, ICT, and architectural disciplines.</li> <li >Provide technical support for airport and infrastructure mechanical systems, including HVAC, plumbing, drainage, pumping systems, utilities, and specialist mechanical systems.</li> <li >Review mechanical equipment selections, technical specifications, data sheets, and vendor submissions.</li> <li >Support the development and review of Material Submittals, Method Statements, and Inspection &amp; Test Plans (ITPs).</li> <li >Conduct site inspections and monitor mechanical works for compliance with approved engineering requirements.</li> <li >Provide engineering support to construction teams and resolve technical issues encountered during site execution.</li> <li >Support testing, pre-commissioning, commissioning, and functional performance testing of mechanical systems.</li> <li >Review and verify as-built drawings, O&amp;M manuals, testing records, commissioning documentation, and handover dossiers.</li> <li >Identify design coordination issues, constructability concerns, and technical risks, recommending appropriate mitigation measures.</li> <li >Support value engineering and constructability initiatives to improve system performance and project cost effectiveness.</li> </ul> <h3 >Technical Compliance and Standards</h3> <p >The role requires ensuring all mechanical works comply with applicable industry standards and codes. This includes adherence to ASHRAE, ASME, NFPA, IPC, IMC, SMACNA, ASTM, ISO, and other project-specific standards. The engineer will also coordinate with Procurement and Vendors regarding technical requirements, equipment delivery, and documentation.</p> <h3 >Required Qualifications and Experience</h3> <ul > <li >A minimum of <strong >5 to 10 years</strong> of experience in mechanical engineering.</li> <li >Demonstrated experience in providing technical engineering support for design, construction, testing, and commissioning of mechanical systems.</li> <li >Experience with airport, aviation, or large-scale infrastructure projects is preferred.</li> <li >Ability to review and respond to RFIs, technical queries, and design clarifications.</li> </ul> <h3 >Work Environment and Collaboration</h3> <p >This position involves active participation in technical coordination meetings with consultants, contractors, suppliers, and project stakeholders. The <strong >Mechanical Engineer</strong> will coordinate with Quality and HSE teams to ensure compliance with project requirements and safety standards. Additionally, the role includes providing technical guidance to junior engineers, inspectors, and site teams, and supporting continuous improvement initiatives.</p>

Esnad Contracting Company is looking for an experienced Civil Site Engineer to join our team in Jeddah.<br>Key Responsibilities Supervise and monitor civil construction works for water tanks and pipeline networks. Ensure all works are executed in accordance with approved drawings, specifications, and project requirements. Coordinate with project teams, subcontractors, and consultants to ensure smooth site operations. Monitor work progress and ensure adherence to project schedules. Conduct site inspections and maintain quality standards throughout construction activities. Ensure compliance with HSE regulations and company safety procedures. Prepare daily site reports and coordinate technical issues with the project team.<br>Requirements Bachelor's Degree in Civil Engineering. Minimum 4 years of experience in civil construction projects. Proven experience in civil works and utility networks (pipelines & tanks). Strong knowledge of construction drawings, specifications, and quality standards. Excellent coordination, communication, and problem-solving skills.

Dar Al Dawa is seeking a qualified and motivated Architectural Engineer to join its team in Riyadh, Saudi Arabia, supporting architectural projects and ensuring compliance with applicable standards and project requirements.<br>Key Responsibilities Prepare and review architectural drawings, layouts, and design specifications for company facilities and projects. Coordinate with engineering, maintenance, contractors, and other relevant stakeholders to ensure effective project execution. Support the planning and implementation of construction, renovation, and facility improvement projects. Review technical drawings, material specifications, and contractor submissions to ensure compliance with approved designs and requirements. Monitor project progress, quality, timelines, and adherence to approved budgets. Conduct site visits and inspections to verify that architectural works comply with approved plans and applicable regulations. Ensure compliance with Saudi building codes, relevant safety requirements, and applicable engineering standards. Prepare technical reports, project documentation, and progress updates as required. Identify design or execution challenges and recommend practical, cost-effective solutions. Support the evaluation of contractors, suppliers, and technical proposals related to architectural works. Qualifications & Requirements Bachelor's degree in Architectural Engineering or Architecture. Saudi Nationals are preferred. Minimum of 2 years of relevant professional experience. Valid professional registration with the Saudi Council of Engineers (SCE). Good knowledge of architectural design principles, construction practices, and Saudi building regulations. Proficiency in Auto CAD and relevant architectural design software; knowledge of Revit is an advantage. Strong communication, coordination, and problem-solving skills. Ability to manage multiple tasks and work effectively with cross-functional teams. Proficiency in English and Arabic is preferred.

At Air Products, we reimagine what’s possible. By tapping into the motivation of our people and our collective experience, we create the ideas and innovations that drive us forward. When we come together – where every voice is heard and everyone knows they belong and matter – we create solutions that launch people into space, support lifesaving care in hospitals, and enable the construction of groundbreaking, world scale production facilities.<br><br>Reimagine What’s Possible <br><br>Purpose<br><br>The Senior Process Controls Engineer works closely with Maintenance, Operations, Engineering and Technical Management to coordinate, organize and execute process controls activities for preventive and corrective maintenance. The role aims to reduce maintenance-related costs while improving plant reliability and availability in line with business needs across Air Separation Units (ASU), Steam Methane Reformers (HYCO), CO2 capture, utilities and associated ancillary equipment. The role may also support joint venture partners, equipment sales customers and new customers as required by BHIG.<br><br>Nature & Scope<br><br>Reporting to the Engineering Manager, the Senior Process Controls Engineer provides day-to-day technical support to maintain the safe, reliable and efficient operation of process control systems and low-voltage instrumentation and controls equipment. The role plans and executes preventive and corrective maintenance activities in coordination with Maintenance Management, Operations and Engineering and works closely with internal and external resources to ensure safe and reliable execution.<br><br>The facilities cover multiple technologies, including ASU, HYCO, CO2 production and H2 mobility. The incumbent routinely interfaces with Operations, Maintenance and Instrument Technicians to provide troubleshooting support, work instructions and technical guidance for process control systems. The position requires teamwork, clear communication, organization, change management, work-process optimization, planning, leadership, and hands-on technical capability across related disciplines.<br><br>Safety<br><br>Principal Accountabilities<br><br> Maintain a safe work environment and demonstrate visible leadership in BHIG and industry safe-work processes to prevent injuries. Ensure appropriate documentation is maintained for safety-related activities. Provide technical support and safety leadership for Management of Change (MOC), Operational/Process Hazard Reviews (OPHR), Safety Integrity Level (SIL) assessments and other process-safety initiatives. Consult BHIG and shareholder process safety specialists as required. Support the implementation, audit and revalidation of Critical Safety Systems (CSS), Safety Instrumented Systems (SIS) and Safety Instrumented Functions (SIF), including the applicable lifecycle documentation and testing requirements.<br><br>Technical<br><br> Provide technical solutions and lead execution planning for SAP PM activities covering plant instrumentation, analyzers, gas chromatography and process control systems, including DCS, local PLCs and associated control loops. Maintain long-term instrumentation and controls plans covering calibration, spare-parts management, control logic, programming, graphics changes, operational changes, system migration and backup management. Perform SIL assessments and verification and support SIS and SIF lifecycle activities. Provide engineering support and prepare punch lists during plant construction and commissioning. Ensure timely closure of punch items, accurate document control and compliance with quality assurance requirements. Interface with Process Engineering to identify gaps and develop improved operating and control strategies to achieve productivity targets. Develop tracking programs and metrics for plant optimization, efficiency and controller on-stream performance. Interface with Advanced Controls resources to define DCS interface requirements and jointly design, implement and test the required interfaces. Support plant productivity and improvement projects, including instrument specification, control-system configuration, detailed cable and wiring design, and preparation of work packages for contractor bidding and installation. Maintain current engineering specifications and sizing calculations for procurement of instrumentation and controls equipment, including control valves, flowmeters, inline devices, transmitters and analyzers. Provide engineering input to develop and maintain instrumentation and controls standards, procedures, best practices, inspection contracts and contractor-selection guidelines. Lead and provide technical support for new installations, existing plant modifications, ongoing operations, continuous improvement and maintenance activities across BHIG facilities. Ensure compliance with legal requirements and BHIG safety and technical standards. Provide technical support for BHIG equipment-sales activities, existing plant modifications, operations, continuous improvement and maintenance services for customers in the Region through site visits, remote support or the Process Intelligence Center. Provide technical leadership for investigations and Root Cause Analysis (RCA) to identify and implement sustainable corrective and preventive actions.<br><br>Operations<br><br> Provide process-controls engineering support to operate ASU, HYCO, CO2 and H2 mobility facilities safely and reliably while meeting customer requirements for product quality, supply flexibility and contractual compliance. Ensure BHIG standards and applicable shareholder best practices for EH&S, productivity, reliability, quality and customer service are met. Provide technical support to commissioning teams during commissioning, start-up and troubleshooting activities and participate in Operations training before plant commissioning. Assist Operations in maintaining accurate document control and monitoring quality assurance initiatives. Maintain alignment with Plant Managers, Site Leadership, and the Business Area on asset-management opportunities and commercial priorities. Provide technical support for turnarounds and major maintenance activities. Establish and maintain compliance with applicable company requirements, local regulations, technology standards and codes consistent with BHIG operational objectives. Participate in technical reviews, equipment design, installation, operation and optimization, including validation, Mechanical Integrity, Management of Change and procedure development and implementation.<br><br>Repair & Maintenance<br><br> Establish and maintain close working relationships with Process Engineering, Operations and Maintenance personnel to continuously monitor and evaluate plant performance and process-control systems and equipment. Develop and implement comprehensive maintenance plans for process-control systems and equipment and provide technical guidance and detailed instructions to schedule, execute and monitor plan compliance. Develop engineering solutions for repetitive failures and other conditions that adversely affect plant operations. Provide engineering support and participate in or lead incident investigations and RCA activities. Identify and implement sustainable corrective actions. Guide the Maintenance team in setting spare-parts inventory levels, managing quality and developing inventory strategies.<br><br>Project Management / Budget<br><br> Apply appropriate project-development and project-management practices, including scope, budget, schedule, execution strategy, risk planning and cost reporting, for projects and turnaround activities. Provide engineering support in developing the annual budget for process-control systems and equipment maintenance, repair and system upgrades.<br><br>Professional<br><br> Lead by example and promote teamwork through open communication, active listening, and timely issue resolution. Drive continuous improvement in safety performance, reliability, and cost of quality. Build and maintain positive working relationships with internal and external stakeholders. Support, mentor and develop instrument technicians and less-experienced engineers.<br><br>Minimum Requirements And Qualifications<br><br>Education & Experience<br><br> Bachelor's degree in Instrumentation, Control, Electrical, Electronics or related engineering discipline. Minimum 10 years of relevant process automation experience in chemical, refinery or gas-plant maintenance, inspection or engineering. Demonstrated hands-on plant experience in troubleshooting, maintenance, commissioning and operation of instrumentation and process-control systems. Experience with Air Separation, HYCO, and gasification process systems is preferred.<br><br>Technical Skills<br><br> Troubleshooting and maintenance-level knowledge of Siemens PCS 7 Distributed Control Systems, including specifications, configuration and programming using PCS 7, STEP 7 and Win CC. Experience with other control platforms is an advantage. Demonstrated ability to configure, calibrate, troubleshoot and repair process instrumentation for temperature, pressure, flow, voltage and other process variables. Working knowledge of industrial computer networks and demonstrated logical, systematic troubleshooting and problem-solving capability. Knowledge of SIL, SIS, SIF and Supervisory Control and Data Acquisition (SCADA) principles and applications. Knowledge of applicable oil, gas and refining industry codes and standards, including API, ISA, NEC/IEC, NFPA and ASME. Knowledge of Saudi Aramco standards and working practices is preferred. Knowledge of process safety, occupational health and applicable local environmental requirements. Proficiency in Microsoft Office and relevant engineering, maintenance and data-historian applications.<br><br>Leadership & Behavioral Competencies<br><br> Strong commitment to employee involvement, teamwork, diversity, and inclusion. Ability to communicate effectively with management, Operations, Maintenance, customers and contractors. Proficiency in spoken and written English is required; Arabic language capability is an advantage. Demonstrated leadership, organizational, computer, interpersonal and written and verbal communication skills. Confident, self-motivated, results oriented and committed to continuous improvement. Formal training and experience in Six Sigma and continuous improvement tools is a plus.<br><br>Founded in 1940, Air Products is a world-leading industrial gases company and has a proud history of innovation, operational excellence, with an unwavering commitment to safety and environmental stewardship. Working together, we are taking our passion and diverse backgrounds forward to reimagine what’s possible and generate a cleaner future for our customers, our communities, and the world.

<p>We are seeking a motivated Civil Engineer who is a Saudi national and has approximately 2 years of relevant experience , preferably within an engineering, construction, or infrastructure environment. The successful candidate will support the delivery of civil engineering works, ensuring that activities are executed in accordance with approved drawings, specifications, quality standards, and project requirements.</p><p>Key Responsibilities</p><ul><li>Assist in the planning, coordination, and supervision of civil engineering and construction activities.</li><li>Review drawings, specifications, method statements, and other technical documentation.</li><li>Coordinate with contractors, consultants, suppliers, and other project stakeholders.</li><li>Monitor site activities to ensure compliance with approved designs, specifications, safety requirements, and quality standards.</li><li>Conduct site inspections and identify technical issues, defects, or deviations from approved requirements.</li><li>Assist with measurements, quantities, progress monitoring, and preparation of technical reports.</li><li>Support the preparation and review of project documentation, including inspection requests, material submittmits, and technical reports.</li><li>Assist in resolving technical and construction-related issues in coordination with senior engineers and project teams.</li><li>Maintain accurate records of site activities, inspections, and project progress.</li><li>Ensure that all assigned work is completed within the required schedule and in accordance with project standards.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Saudi Arabian national.</li><li>Bachelor s Degree in Civil Engineering from a recognized university.</li><li>Approximately 2 years of relevant professional experience .</li><li>Previous experience in engineering, construction, infrastructure, or related projects is preferred.</li><li>Good understanding of civil engineering principles, construction methods, drawings, and specifications.</li><li>Ability to read and interpret engineering drawings and technical documents.</li><li>Good communication, coordination, and problem-solving skills.</li><li>Proficiency in Microsoft Office; knowledge of AutoCAD or other relevant engineering software is an advantage.</li><li>Willingness to work on project sites and collaborate with multidisciplinary teams.</li></ul><p>Preferred Attributes</p><ul><li>Strong technical and analytical skills.</li><li>Proactive and willing to learn.</li><li>Good attention to detail and commitment to quality.</li><li>Ability to work effectively under supervision as well as independently.</li><li>Strong teamwork and communication skills.</li></ul>

<h3 >About House of Consulting Office</h3> <p >House of Consulting Office for Consulting Engineers Co. (HCO) is a leading multidisciplinary consulting engineering firm in Saudi Arabia. HCO provides integrated architectural, engineering, planning, and project management consultancy services, delivering comprehensive solutions that support clients throughout the entire project lifecycle.</p> <h3 >Role Overview: Structural Engineer</h3> <p >We are currently seeking an experienced <strong >Structural Engineer</strong> to join our team. This full-time role involves the supervision of structural construction works and ensuring compliance with approved designs and specifications across all project phases. The successful candidate will play a key role in the delivery of high-quality engineering solutions.</p> <h3 >Key Responsibilities</h3> <ul > <li >Supervise structural construction works throughout all project phases.</li> <li >Review structural drawings, shop drawings, reinforcement details, and material submittals.</li> <li >Monitor concrete, steel, and structural installations.</li> <li >Conduct structural inspections to ensure compliance with approved designs and specifications.</li> <li >Coordinate with contractors, consultants, and project teams.</li> <li >Resolve structural technical issues during construction.</li> <li >Monitor quality control procedures and structural testing.</li> <li >Prepare inspection reports and technical documentation.</li> <li >Ensure compliance with safety standards and project requirements.</li> </ul> <h3 >Qualifications and Experience</h3> <ul > <li >Bachelor's Degree in Civil or Structural Engineering.</li> <li >A minimum of <strong >5 to 10 years</strong> of relevant experience in structural engineering.</li> <li >Previous <strong >PMC (Project Management Consultancy) experience is mandatory</strong>.</li> </ul> <h3 >Work Location and Type</h3> <p >This is a full-time position located in AlUla, within the Al Har Al Ulya region of Al Madinah, Saudi Arabia (Medina). The role requires a dedicated presence on-site to effectively manage and supervise structural works.</p> <h3 >Application Information</h3> <p >House of Consulting Office invites qualified candidates who meet the specified requirements to apply for this Structural Engineer position. We look forward to reviewing your application.</p>

<div dir="rtl"><h3 >نبذة عن الدور</h3> <p >تبحث شركة الباب العالي السعودية عن <strong >مهندس سلامة وصحة مهنية</strong> للانضمام إلى فريقها في جازان. يركز هذا الدور على تطوير وتطبيق معايير السلامة المهنية لضمان بيئة عمل آمنة وصحية. الوظيفة متاحة بنظام الدوام الكامل وتتطلب خبرة عملية تتراوح بين 0-1 سنة.</p> <h3 >الهدف من الوظيفة</h3> <p >يهدف شاغل هذه الوظيفة إلى إرساء وتطوير أسس وقواعد وإجراءات السلامة والصحة المهنية داخل مواقع العمل. يتضمن ذلك تحديد الأخطار المهنية المحتملة ووضع التدابير الوقائية اللازمة لتفاديها، بالإضافة إلى توفير ومتابعة استخدام جميع مستلزمات وأدوات السلامة. كما يضطلع المهندس بمسؤولية إعداد الوثائق والتقارير المتخصصة التي توثق نتائج الأعمال وتضمن الامتثال للمعايير المعتمدة.</p> <h3 >المهام والمسؤوليات الرئيسية</h3> <ul > <li >إعداد وتطوير أسس وإجراءات وتعليمات السلامة والصحة المهنية، مثل سياسات السلامة، تعليمات العمل الآمن، تعليمات الإخلاء، تعليمات لجان السلامة، سجلات السلامة، والفحص الطبي، ومتابعة اعتمادها ومراقبة مدى الالتزام بها.</li> <li >تحديد مكامن الأخطار الميكانيكية والكهربائية والكيميائية في موقع العمل، ووضع الإشارات والملصقات التحذيرية المناسبة.</li> <li >إعداد قوائم ببنود وكميات ومواصفات معدات ومستلزمات السلامة والصحة المهنية، ومتابعة توفيرها وضمان التزام العاملين باستخدامها.</li> <li >تطوير أساليب وإجراءات العمل بشكل مستمر ومواكبة أحدث التطورات التقنية في مجال السلامة والصحة المهنية.</li> <li >إعداد الوثائق والتقارير المتخصصة المتعلقة بالأعمال والمشروعات الهندسية ونسب تقدمها، وعرضها وتوضيحها وحفظها في قاعدة البيانات الخاصة بها وفقاً للسياسات والإجراءات المعتمدة.</li> </ul> <h3 >المؤهلات والخبرات المطلوبة</h3> <ul > <li >خبرة عملية تتراوح بين <strong >0 إلى 1 سنة</strong> في مجال السلامة والصحة المهنية أو مجال هندسي ذي صلة.</li> <li >شهادة جامعية في تخصص هندسي ذي صلة (مثل الهندسة الصناعية، الهندسة الكيميائية، أو ما يعادلها) أو في مجال السلامة والصحة المهنية.</li> </ul> <h3 >معلومات إضافية</h3> <ul > <li ><strong>موقع العمل:</strong> جازان.</li> <li ><strong>نوع الوظيفة:</strong> دوام كامل.</li> <li ><strong>الراتب:</strong> لم يتم الإفصاح عنه.</li> </ul> <h3 >التقديم</h3> <p >ندعو المهتمين والمؤهلين للتقديم على هذا الدور للانضمام إلى فريق عمل شركة الباب العالي السعودية في جازان.</p></div>

<div dir="rtl"><h3 >نبذة عن الوظيفة</h3> <p >تبحث شركة وسام الاتحاد للمقاولات عن <strong >رسام هندسي</strong> للانضمام إلى فريقها في الهفوف، المنطقة الشرقية. هذا الدور متاح للمرشحين ذوي الخبرة من <strong >0 إلى 1 سنة</strong>، ويقدم فرصة للعمل بدوام كامل ضمن بيئة مهنية متخصصة في مجال المقاولات.</p> <h3 >ملخص الدور</h3> <p >يتضمن دور الرسام الهندسي قراءة وتفسير مسودات المخططات والتصاميم الهندسية والرسوم، ثم رسم هذه المخططات وتحريرها. يشمل ذلك العمل اليدوي وباستخدام البرمجيات المتخصصة على أجهزة الحاسوب. كما يضطلع شاغل الوظيفة بمسؤولية طباعة المخططات النهائية بالمقياس المطلوب، وتصنيفها، وتوثيقها، وحفظها بشكل منظم.</p> <h3 >المهام والمسؤوليات الرئيسية</h3> <ul > <li >استلام مسودات الرسوم الهندسية ومناقشتها مع المهندس المختص لتفسيرها وإعداد الرسومات والتصاميم الهندسية والرسوم التنفيذية.</li> <li >رسم المخططات والرسوم التنفيذية يدوياً باستخدام أدوات وطاولة الرسم.</li> <li >رسم المخططات الهندسية والرسوم التنفيذية باستخدام البرمجيات المتخصصة على جهاز الحاسوب.</li> <li >تدقيق الرسوم وتقديمها للمهندس المختص، وإعداد الرسوم النهائية وفقاً لتوجيهاته.</li> <li >طباعة المخططات باستخدام برامج الحاسوب وبمقياس الرسم المطلوب.</li> <li >تصنيف وفهرسة وتوثيق وترتيب وحفظ المخططات الهندسية.</li> </ul> <h3 >المؤهلات والخبرة المطلوبة</h3> <ul > <li >خبرة عملية تتراوح من <strong >0 إلى 1 سنة</strong> في مجال الرسم الهندسي أو ما يعادله.</li> <li >القدرة على قراءة وتفسير المخططات والتصاميم الهندسية.</li> <li >إتقان استخدام أدوات الرسم اليدوي وبرمجيات الرسم الهندسي على الحاسوب.</li> <li >دقة عالية في العمل والاهتمام بالتفاصيل.</li> </ul> <h3 >تفاصيل العمل والموقع</h3> <p >تتوفر هذه الوظيفة بنظام <strong >الدوام الكامل</strong> في مدينة <strong >الهفوف</strong> ضمن <strong >المنطقة الشرقية</strong> بالمملكة العربية السعودية. سيعمل الرسام الهندسي ضمن فريق شركة وسام الاتحاد للمقاولات، مساهماً في دعم المشاريع الهندسية المختلفة.</p> <h3 >معلومات إضافية</h3> <p >لم يتم الكشف عن تفاصيل الراتب لهذه الوظيفة. يمكن للمرشحين المهتمين والذين يستوفون المتطلبات المذكورة أعلاه التقدم بطلبهم.</p></div>

<h3 >Civil Engineer Opportunity</h3> <p >House of Consulting Office (HCO), a leading multidisciplinary consulting engineering firm in Saudi Arabia, is seeking an experienced <strong >Civil Engineer</strong> to join our team. This full-time role is based in AlUla, Al Madinah, Saudi Arabia, and involves contributing to diverse engineering projects across the region.</p> <h3 >About House of Consulting Office</h3> <p >HCO specializes in providing integrated architectural, engineering, planning, and project management consultancy services. We are committed to delivering comprehensive solutions that support our clients throughout the entire project lifecycle, ensuring high standards of quality and efficiency in all our endeavors.</p> <h3 >Key Responsibilities</h3> <ul > <li >Supervise civil construction activities and ensure compliance with approved designs.</li> <li >Review civil drawings, shop drawings, material submittals, and method statements.</li> <li >Monitor earthworks, concrete works, roads, infrastructure, and site development activities.</li> <li >Conduct site inspections and ensure compliance with project specifications and quality standards.</li> <li >Coordinate with contractors, consultants, and project stakeholders.</li> <li >Monitor construction progress and resolve technical site issues.</li> <li >Ensure compliance with safety requirements and quality procedures.</li> <li >Prepare inspection reports and progress documentation.</li> <li >Support project delivery within schedule and budget.</li> </ul> <h3 >Required Experience</h3> <p >Candidates for this Civil Engineer position should possess <strong >5 to 10 years of relevant experience</strong> in civil engineering, preferably within a consulting or construction environment. A proven track record in supervising construction activities and managing project documentation is essential.</p> <h3 >Work Environment and Location</h3> <p >This is a full-time position based in AlUla, located within the Al Madinah region of Saudi Arabia. The role involves site-based supervision and coordination, working collaboratively with various project stakeholders to ensure successful project execution.</p> <h3 >Application Process</h3> <p >We invite qualified candidates to apply for this Civil Engineer position. Join House of Consulting Office and contribute to impactful engineering projects in Saudi Arabia.</p>

<h3 >About the Role</h3> <p >SNC-Lavalin Fayez Engineering is seeking a <strong >Fit Out Construction Engineer</strong> to represent the Consultant on-site. This full-time role involves overseeing the execution of interior fit-out works for large-scale mixed-use developments and theme park projects. The engineer will monitor contractor performance, ensure compliance with project specifications, and maintain quality standards from construction through handover.</p> <h3 >Key Responsibilities</h3> <ul > <li >Supervise and inspect fit-out construction activities to ensure compliance with approved drawings, specifications, and contract requirements.</li> <li >Monitor the installation of architectural finishes, joinery, ceilings, flooring, partitions, themed elements, FF&amp;E, and specialty fit-out works.</li> <li >Review material submittals, shop drawings, method statements, and RFIs submitted by contractors.</li> <li >Coordinate with architects, MEP engineers, contractors, and specialist vendors to resolve site issues.</li> <li >Conduct regular site inspections and prepare observation reports, Non-Conformance Reports (NCRs), and snagging lists.</li> <li >Verify work progress and provide recommendations for contractor payment applications.</li> <li >Ensure quality assurance and quality control procedures are implemented throughout construction.</li> <li >Monitor contractor compliance with project schedules and approved construction methodologies.</li> <li >Witness testing, commissioning, and handover activities.</li> <li >Ensure compliance with Saudi regulations, project specifications, health and safety requirements, and industry best practices.</li> <li >Attend progress meetings and prepare technical reports for the Resident Engineer and Project Manager.</li> </ul> <h3 >Qualifications and Experience</h3> <ul > <li >Bachelor's Degree in Civil Engineering, Architectural Engineering, Construction Engineering, or a related discipline.</li> <li >A minimum of <strong >10 years of experience</strong> in construction and site supervision consultancy.</li> <li >Proven experience in mixed-use developments, entertainment destinations, theme parks, hospitality, retail, and large-scale commercial projects.</li> <li >Previous experience working with engineering consultancies on site supervision assignments.</li> </ul> <h3 >Required Skills</h3> <ul > <li >Strong knowledge of architectural finishes, fit-out systems, themed construction, and FF&amp;E installations.</li> <li >Familiarity with international construction standards and Saudi Arabian regulations.</li> <li >Proficiency in AutoCAD, MS Office, and project management software.</li> </ul>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>URGENT HIRING FOR SAUDI ARABIA</p><p><strong>Position:</strong>Architectural Engineer</p><p><strong>Location:</strong> Saudi Arabia</p><p><span >Includes Food, Accommodation &amp; Transportation.</span></p><p><strong>Benefits:</strong> Medical Insurance provided by the company Annual Vacation as per company policy</p><p><strong>Duty Hours:</strong> 8 hours per day</p><p><strong>Experience Required:</strong> 1015 years of total experience. Minimum 5 years of GCC/Gulf experience. Must have experience in construction companies.</p><p><strong>Job Responsibilities:</strong></p><ul><li>Review and develop architectural designs and construction drawings.</li><li>Coordinate with consultants, clients, and multidisciplinary engineering teams.</li><li>Ensure compliance with building codes, project specifications, and quality standards.</li><li>Monitor site execution and resolve technical issues.</li><li>Conduct inspections and provide progress reports.</li><li>Support project planning, design development, and project delivery activities.</li></ul><p><strong>General Requirements</strong></p><ul><li>GCC experience is mandatory.</li><li>Construction company background is mandatory.</li><li>Strong communication and coordination skills.</li><li>Ability to work in a multicultural project environment.</li><li>Immediate joiners will be preferred.</li></ul><p><strong>Education:</strong> BE / B.Tech</p><p><strong>Interview Mode:</strong> Online</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>1015 years of total experience.</li><li>Minimum 5 years of GCC/Gulf experience.</li><li>Must have experience in construction companies.</li><li>BE / B.Tech</li><li>GCC experience is mandatory.</li><li>Construction company background is mandatory.</li><li>Strong communication and coordination skills.</li><li>Ability to work in a multicultural project environment.</li><li>Immediate joiners will be preferred.</li></ul><p></p></section>

<h3 >About the Role</h3> <p >ENGIE Solutions Middle East is seeking an MEP Engineer to join their team in the Eastern Province. This full-time role requires 2-5 years of experience and is integral to ensuring the reliability, efficiency, and compliance of mechanical, electrical, and plumbing systems within King Salman Energy Park (SPARK).</p> <h3 >Role Context and Impact</h3> <p >The MEP Engineer will support the inspection, maintenance, and performance optimization of MEP systems across SPARK's infrastructure and building assets. This includes tenant facilities, substations, pumping stations, utility corridors, and common areas. The role involves close collaboration with senior engineers, Facilities Management (FM) teams, and service providers to uphold high operational standards and system integrity.</p> <h3 >Key Responsibilities</h3> <ul > <li >Monitor the performance and operational status of MEP systems, including HVAC, water supply, drainage, fire protection, lighting, power distribution, and pumping stations.</li> <li >Conduct site inspections and support maintenance activities for MEP systems across infrastructure and building facilities.</li> <li >Participate in troubleshooting, fault analysis, and resolution of MEP-related technical issues.</li> <li >Support the review of method statements, risk assessments, and maintenance procedures from contractors.</li> <li >Ensure building MEP systems are maintained according to specifications, tenant guidelines, and health and safety standards.</li> <li >Support the technical review and commissioning of new or refurbished MEP installations.</li> <li >Assist in implementing preventive and corrective maintenance schedules in coordination with O&amp;M contractors.</li> <li >Conduct field verification of maintenance activities to ensure alignment with SLAs and technical standards.</li> <li >Maintain records of completed works, service reports, and contractor performance.</li> <li >Monitor spare parts usage and support timely identification of required materials.</li> <li >Coordinate with FM teams to minimize downtime and ensure timely resolution of urgent issues.</li> <li >Assist in tracking consumption data for utilities such as electricity, water, and chilled water across MEP systems.</li> <li >Identify abnormal usage trends and report potential inefficiencies or faults.</li> <li >Support the implementation of energy efficiency measures and corrective actions.</li> <li >Work with sustainability teams to improve performance through data-driven insights and technical adjustments.</li> <li >Ensure all MEP activities comply with local regulations, SPARK standards, and international codes (*, SBC, ASHRAE, NFPA, NEC, IEC).</li> <li >Participate in safety inspections and enforce compliance with HSE protocols during site activities.</li> <li >Assist with documentation and audits related to safety and regulatory compliance.</li> <li >Liaise with external contractors and vendors to support ongoing MEP maintenance works and service delivery.</li> <li >Monitor contractor performance and ensure compliance with contractual obligations, timelines, and quality expectations.</li> <li >Provide site-level coordination during minor works, equipment replacements, and system upgrades.</li> <li >Maintain up-to-date MEP documentation, including drawings, asset registers, test reports, and maintenance logs.</li> <li >Assist in preparing technical reports, condition assessments, and recommendations for system improvements.</li> <li >Support the integration of MEP asset data into CAFM/CMMS platforms for centralized monitoring and tracking.</li> </ul> <h3 >Reporting and Collaboration</h3> <p >The MEP Engineer reports directly to the <strong >Senior MEP Engineer</strong>. Internal collaboration includes Facilities Management, Utilities and Sustainability Teams, Engineering and Projects, HSE and Compliance, and Procurement and Vendor Management. External stakeholders include O&amp;M contractors and service providers, engineering consultants, utility suppliers, and regulatory bodies for inspections and compliance matters.</p> <h3 >Qualifications and Experience</h3> <ul > <li >2-5 years of experience in MEP engineering.</li> <li >Demonstrated understanding of MEP systems within industrial or large-scale facility environments.</li> <li >Familiarity with relevant local regulations and international codes (*, SBC, ASHRAE, NFPA, NEC, IEC).</li> </ul> <h3 >Work Environment</h3> <p >This is a full-time position based in the Eastern Province, supporting operations within King Salman Energy Park (SPARK).</p>