وظائف مهندس تفتيش هندسي في السعودية

<p><b>Job Description</b> Overview The Senior Civil Engineer will be responsible for supervising, coordinating, and monitoring the construction of bridge and infrastructure works on the Projects. The role will ensure that all construction activities are executed in accordance with approved drawings, specifications, project schedules, quality standards, and safety requirements. Your role Construction Supervision &amp; Execution Supervise day-to-day bridge and infrastructure construction activities. Ensure works are performed in accordance with approved IFC drawings, technical specifications, project procedures, and contract requirements. Monitor construction progress and provide technical support to site teams. Review construction methodologies and ensure compliance with approved method statements. Coordinate construction activities to ensure timely project delivery. Bridge Construction Management Ensure compliance with bridge geometry, alignment, and structural tolerances. Coordinate with survey and quality teams to verify setting-out and structural positioning. Infrastructure Works Coordination Coordinate interfaces between bridge structures and associated infrastructure works. Identify and resolve construction challenges affecting project delivery. Quality Assurance &amp; Control Ensure all works comply with project quality requirements and applicable standards. Review inspection requests and support material approvals. Coordinate inspections with consultants, client representatives, and quality teams. Verify completed works prior to inspections and handover. Review and support the preparation of as-built records and documentation. Contractor &amp; Stakeholder Coordination Coordinate with contractors, subcontractors, consultants, and project stakeholders. Attend progress review meetings and technical coordination meetings. Review site issues and provide practical engineering solutions. Ensure timely resolution of technical queries and design-related issues. Support the engineering team in implementing design revisions and approved changes. Project Planning &amp; Reporting Monitor project schedules and identify potential delays. Assist in short-term and long-term construction planning activities. Prepare daily, weekly, and monthly progress reports. Track productivity and construction performance against project targets. Support project controls and planning teams with progress assessments. Health, Safety &amp; Environmental Compliance Ensure construction activities comply with project HSE requirements. Promote a strong safety culture across all work areas. Participate in safety inspections, toolbox talks, and incident investigations as required. Ensure safe execution of high-risk activities including lifting operations, work at height, excavations, and temporary works.</p><p><strong>Desired Candidate Profile</strong></p><h2>About you</h2> <p>Qualifications</p> <ul> <li>Bachelor's Degree in Civil Engineering.</li> <li>Master's Degree in Structural Engineering or Construction Management is advantageous.</li> <li>Professional registration with a recognized engineering institution is preferred.</li> </ul> <p>Experience Requirements</p> <ul> <li>Minimum 12-15 years of experience in major civil engineering and infrastructure projects.</li> <li>Minimum 8 years of relevant bridge construction experience.</li> <li>Experience on large-scale infrastructure projects within Saudi Arabia or the GCC is highly desirable.</li> <li>Previous experience working with international consultants, contractors, or government infrastructure programs is preferred.</li> </ul> <p>Key Skills</p> <ul> <li>Strong technical and construction problem-solving skills.</li> <li>Excellent communication and coordination abilities.</li> <li>Ability to manage multiple construction activities simultaneously.</li> <li>Strong reporting and documentation capabilities.</li> <li>Effective stakeholder and contractor management skills.</li> <li>High attention to detail and quality standards.</li> </ul> <p>Behavioral Competencies</p> <ul> <li>Proactive and solution-oriented approach.</li> <li>Strong leadership and teamwork abilities.</li> <li>Ability to work effectively in a fast-paced construction environment.</li> <li>Strong commitment to safety, quality, and project delivery.</li> <li>Excellent organizational and time-management skills.</li> </ul>

<div dir="rtl"><h3 >نبذة عن الدور</h3> <p >تبحث شركة تكامل المشاريع للاستشارات المهنية عن مهندس مدني للانضمام إلى فريقها في الدمام، المنطقة الشرقية. يركز هذا الدور بدوام كامل على تخطيط وتصميم وتنفيذ ومتابعة المشاريع، مع التركيز على الامتثال للمتطلبات البيئية وتحقيق الاستدامة. يتطلب الدور خبرة تتراوح من 0 إلى سنة واحدة.</p> <h3 >المهام والمسؤوليات الرئيسية</h3> <ul > <li >إعداد الدراسات والتصاميم الهندسية للمشاريع البيئية والبنية التحتية.</li> <li >المشاركة في إعداد ومراجعة دراسات تقييم الأثر البيئي (EIA) للمشاريع.</li> <li >تقييم التأثيرات البيئية للمشاريع الإنشائية واقتراح الحلول والتدابير المناسبة للحد منها.</li> <li >مراجعة المخططات والتصاميم الهندسية للتأكد من توافقها مع المتطلبات البيئية.</li> <li >الإشراف على تنفيذ الأعمال الميدانية وضمان الالتزام بالاشتراطات البيئية.</li> <li >مراقبة مؤشرات الأداء البيئي (KPIs) مثل جودة الهواء، المياه، وإدارة النفايات واقتراح فرص التحسين.</li> <li >إعداد التقارير الفنية والهندسية والبيئية المتعلقة بالمشاريع.</li> <li >التنسيق مع الجهات الحكومية والاستشارية والمقاولين فيما يخص المتطلبات البيئية.</li> <li >إجراء الزيارات الميدانية وعمليات التفتيش وإعداد التقارير اللازمة.</li> <li >تقييم المخاطر البيئية المرتبطة بالمشاريع ووضع الإجراءات الوقائية والتصحيحية.</li> <li >ضمان الالتزام بالأنظمة واللوائح البيئية والهندسية المعمول بها.</li> <li >إعداد الخطط والاستراتيجيات المتعلقة بالاستدامة البيئية.</li> <li >القيام بأي مهام أخرى ذات صلة يكلف بها من قبل الإدارة.</li> </ul> <h3 >نطاق العمل الهندسي</h3> <p >يتضمن الدور دراسة طبوغرافية وجيولوجية المواقع الإنشائية، وتحليل نتائج فحص التربة، ودراسة المتطلبات والمخططات المعمارية للمشاريع. كما يشمل تحديد أعماق التأسيس اللازمة وإجراء تحليل إنشائي متكامل لعناصر المشروع. يتولى المهندس إعداد تصاميم المشروع، ومتابعة إعداد المخططات الإنشائية وتدقيقها، بالإضافة إلى تدقيق جداول الكميات والمواصفات، والإشراف على تنفيذ المشاريع لضمان مطابقة المواصفات.</p> <h3 >تطوير الأداء والتوثيق</h3> <p >يُتوقع من شاغل الوظيفة تطوير أساليب وإجراءات العمل ومواكبة التطورات التقنية في المجال. كما يتولى إعداد الوثائق والتقارير المتخصصة بالأعمال والمشروعات الهندسية، وتوضيح نسبة تقدمها، وعرضها، وحفظها في قاعدة البيانات الخاصة بها وفقاً للسياسات والإجراءات المعتمدة.</p> <h3 >المؤهلات والخبرات</h3> <ul > <li >خبرة تتراوح من 0 إلى سنة واحدة في مجال الهندسة المدنية.</li> <li >القدرة على تخطيط وتصميم وتنفيذ ومتابعة المشاريع.</li> <li >معرفة بالمتطلبات البيئية ومعايير الاستدامة.</li> <li >مهارات في إعداد التقارير الفنية والتوثيق.</li> </ul> <h3 >بيئة العمل</h3> <p >هذه الوظيفة بدوام كامل في الدمام، المنطقة الشرقية، ضمن فريق عمل متخصص في الاستشارات المهنية. تلتزم الشركة بتوفير بيئة عمل داعمة تساهم في التطور المهني لموظفيها.</p></div>

<p><br></p><p>Your role</p><ul><li>Monitor and enforce compliance with project HSEW requirements, company standards, and applicable Saudi regulations.</li><li>Review and assess contractor HSEW Management Plans, Risk Assessments, Method Statements, Emergency Response Plans, and Permit-to-Work systems.</li><li>Conduct regular site inspections, audits, and safety observations to verify compliance with approved HSE procedures.</li><li>Ensure adequate implementation of safety signage, barricading, access controls, traffic management, and emergency arrangements.</li><li>Support incident, accident, and near-miss investigations and assist in identifying root causes and corrective actions.</li><li>Maintain HSEW inspection reports, audit records, incident logs, and safety performance statistics.</li><li>Conduct site safety inductions and monitor workforce competency and training compliance.</li><li>Promote Health, Safety, Environment, and Wellbeing awareness programs throughout the project.</li><li>Verify compliance with personal protective equipment (PPE) requirements and safe work practices.</li><li>Participate in toolbox talks, safety campaigns, and workforce engagement initiatives.</li><li>Monitor contractor corrective actions and verify close-out of HSE observations and non-conformances.</li><li>Assist in preparing weekly and monthly HSEW reports, KPIs, and performance dashboards.</li><li>Participate in client inspections, safety walkthroughs, and management reviews.</li><li>Support project emergency drills and evaluate emergency response preparedness.</li><li>Coordinate with Resident Engineers, QA/QC teams, contractors, and project stakeholders to ensure HSE compliance.</li><li>Assist in implementing sustainability and environmental initiatives aligned with project objectives.</li><li>Support project handover activities and ensure all HSE documentation is properly maintained.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor's Degree in Engineering, Occupational Health &amp; Safety, Environmental Science, or a related discipline.</li><li>NEBOSH International General Certificate (IGC) is mandatory.</li><li>ISO 45001 Internal Auditor or Lead Auditor certification is preferred.</li><li>IOSH Managing Safely, OSHA, or equivalent HSE certification is advantageous.</li><li>Membership in IOSH, IIRSM, ASSP, or similar professional organizations is desirable.</li><li>Registration with the Saudi Council of Engineers (SCE) is preferred.</li><li>10 to 15 years of professional HSE experience.</li><li>Minimum 5 years of experience on major high-rise and building construction projects.</li><li>Previous experience in Saudi Arabia or GCC countries is highly preferred.</li><li>Experience working with consultants, PMCs, developers, and contractors.</li><li>Demonstrated experience in construction supervision and contractor HSE performance monitoring.</li><li>Thorough understanding of construction hazards associated with high-rise building developments.</li><li>Knowledge of environmental management and sustainability practices within construction projects.</li><li>Experience in emergency preparedness, crisis response, and evacuation planning.</li><li>Familiarity with HSE reporting systems, audits, and compliance monitoring.</li></ul>

<h3 >About the Role</h3> <p >Abdullah A. Al-Barrak &amp; Son Co. is seeking a <strong >Fresh Graduate Safety Engineer</strong> to join a project with Saudi Aramco - SMP in Dhahran. This full-time position is open to recent engineering graduates who possess a strong interest in health, safety, and environmental practices within construction and industrial projects. The role focuses on contributing to the maintenance of workplace safety standards.</p> <h3 >Role Overview</h3> <p >The successful candidate will apply workplace safety principles and demonstrate awareness of safety compliance, hazard identification, and risk management. This position offers an opportunity to develop expertise in ensuring a safe working environment within industrial and construction operations in Dhahran.</p> <h3 >Key Responsibilities</h3> <ul > <li >Coordinate with project teams, contractors, and site supervisors to promote and enforce safety standards.</li> </ul> <h3 >Required Qualifications</h3> <ul > <li >Bachelor's degree in any Engineering discipline.</li> <li >Fresh graduate with 0-1 years of professional experience.</li> </ul> <h3 >Essential Knowledge and Skills</h3> <ul > <li >Strong understanding of workplace safety principles.</li> <li >Awareness of safety compliance, hazard identification, and risk management.</li> <li >Knowledge of health, safety, and environmental practices on construction sites.</li> <li >Knowledge of conducting risk assessments, safety inspections, and incident investigations.</li> <li >Understanding of safety regulations, codes, and company HSE policies.</li> </ul> <h3 >Preferred Attributes</h3> <ul > <li >Project management knowledge is considered a plus.</li> <li >NEBOSH certification is highly preferred.</li> </ul>

<h3 >Overview of the Role</h3> <p >ABIS is seeking a <strong >Fresh Graduate Safety Engineer</strong> to join our team supporting Saudi Aramco - SMP projects in Dhahran. This full-time position is ideal for recent engineering graduates who possess a strong interest in health, safety, and environmental (HSE) practices within construction and industrial project environments. The role focuses on applying fundamental safety principles, ensuring compliance, and contributing to effective risk management strategies.</p> <h3 >Key Responsibilities</h3> <ul > <li >Promote and enforce established safety standards through coordination with project teams, contractors, and site supervisors.</li> <li >Contribute to the implementation of health, safety, and environmental practices on active construction sites.</li> <li >Participate in conducting risk assessments, safety inspections, and incident investigations.</li> <li >Support adherence to relevant safety regulations, industry codes, and company HSE policies.</li> <li >Assist in the identification of potential hazards and contribute to ongoing risk management efforts.</li> </ul> <h3 >Required Qualifications</h3> <ul > <li >Bachelor's degree in any Engineering discipline.</li> <li >Fresh graduate with 0-1 years of professional experience.</li> </ul> <h3 >Essential Skills and Knowledge</h3> <ul > <li >Strong understanding of general workplace safety principles.</li> <li >Awareness of health, safety, and environmental practices specific to construction environments.</li> <li >Knowledge of processes for conducting risk assessments, safety inspections, and incident investigations.</li> <li >Understanding of applicable safety regulations, industry codes, and company HSE policies.</li> <li >Ability to communicate effectively in English, both written and verbal.</li> </ul> <h3 >Preferred Qualifications</h3> <ul > <li >Knowledge of project management principles.</li> <li >NEBOSH certification is highly preferred.</li> </ul> <h3 >Work Environment and Opportunity</h3> <p >This full-time position is based in Dhahran and offers a foundational opportunity for a fresh graduate to commence a career in safety engineering within a significant industrial project context. The role provides exposure to comprehensive health, safety, and environmental practices. Salary for this position will be discussed directly with qualified candidates.</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>The Mechanical / Static Equipment Engineer Specialist will lead the mechanical design review, construction support, commissioning, testing, and engineering activities for new shale gas facilities.<br> The role requires extensive experience with static and rotating equipment in oil and gas production facilities, along with a strong understanding of plant operations, process technologies, equipment reliability, and maintenance.<br> The successful candidate will provide technical leadership throughout the project lifecycle, from engineering design and installation to commissioning, startup, operations support, and optimization.<br> The role also requires collaboration with multidisciplinary teams and support for Saudi Aramco's capital investment and business strategy initiatives.<br> Lead mechanical design reviews for new installation and upgrade projects.<br> Develop and review engineering design packages, PFDs, P&amp;IDs, and technical drawings.<br> Provide day-to-day technical support to Operations and Maintenance teams.<br> Troubleshoot static and rotating equipment issues and recommend solutions.<br> Support construction, installation, pre-commissioning, commissioning, and startup activities.<br> Participate in Turnaround &amp; Inspection (T&amp;I) and performance testing activities.<br> Conduct feasibility studies and recommend technical and economic optimization solutions.<br> Lead multidisciplinary teams, prepare technical reports, and support management decisions.<br> Bachelor’s degree in Mechanical, Chemical, or Petroleum Engineering (Master’s preferred).<br> Minimum 15 years of experience in oil &amp; gas, refinery, petrochemical, or gas processing facilities.<br> Strong experience in static equipment (vessels, exchangers, columns, tanks, reactors).<br> Good knowledge of rotating equipment (pumps, compressors, turbines).<br> Experience in EPC phases: FEED, detailed engineering, construction, and commissioning.<br> Strong knowledge of ASME, API, and TEMA codes and standards.<br> Working knowledge of engineering software (PVElite, CAESAR II, HTRI).<br> Strong communication, leadership, and multidisciplinary coordination skills.<br></span> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> No experience required </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

<p>In a world of possibilities, pursue one with endless opportunities. Imagine Next! At Parsons, you can imagine a career where you thrive, work with exceptional people, and be yourself. Guided by our leadership vision of valuing people, embracing agility, and fostering growth, we cultivate an innovative culture that empowers you to achieve your full potential. Unleash your talent and redefine what s possible.</p><p>Parsons is looking for an exceptionally talented QA/QC Engineer to join our site team on a major public realm development in Diriyah, which includes a series of iconic and neighborhood parks, open spaces, and over 55 kilometers of streetscape. The objective of this program is to create a vibrant, inclusive environment that enhances livability, accessibility, and community well-being.</p><ul><li>Review the Contractor's material submittals and obtain the required approvals according to the applicable standards and project specifications.</li><li>Serves as the focal point for the scheduling and control of construction materials and equipment at the job site</li><li>Conducts inspections to determine if work has been done in accordance with contract specifications.</li><li>Coordinates work of subconsultants for material testing</li><li>Maintains office files related to the project, material inspections and writes daily diaries.</li><li>Prepares daily reports and other documentation, as required by the contract</li><li>Verifies that only approved materials are incorporated in the work</li><li>Recognizes potential conflicts, issues and problems on construction materials, and reports to supervisor with proposed solution</li><li>Collects, reviews and files Certificate of Compliance, MSDS, inspection tags and other information relevant to the materials used.</li><li>May provide technical guidance to lower-level</li><li>Participates in the development of job safety practices and in the preparation of safety reports</li><li>Participates in the development of quality control reports and procedures</li><li>Capability to perform math calculation in order to prepare engineering calculations, graphs and charts</li><li>Observe, check and record works execution is in accordance with approved methods</li><li>Check material delivered are as approved and properly stored</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor's Degree in Engineering.</li><li>Minimum of 8 years engineering experience and a minimum of 5 years' experience as material engineer in the specific infrastructure projects.</li><li>Experience in the operations and maintenance of roads, highway, bridges at domestic and/or foreign locations.</li><li>Knowledge of English grammar and composition, the ability to communicate clearly both orally and in writing; to follow oral and written instructions, prepare written messages and simple charts and graphs.</li><li>Ability to comply with multitude of requirements as applicable to the project based on client and industry standards</li><li>Must be able to recognize hazardous work conditions and take action if necessary</li><li>Ability to use good judgment and work with others is required</li></ul>

<div dir="rtl"><h3 >نبذة عن الدور</h3> <p >تبحث شركة برق العالمية القابضة عن رسام هندسي للانضمام إلى فريقها في حائل. هذا الدور متاح بدوام كامل ويتطلب خبرة تتراوح من 0 إلى 1 سنة، مما يجعله فرصة مثالية للمهندسين الجدد أو ذوي الخبرة المحدودة لبدء مسيرتهم المهنية في بيئة داعمة ومحفزة.</p> <h3 >الغرض من الوظيفة</h3> <p >يتولى الرسام الهندسي مسؤولية تحويل المسودات الهندسية الأولية إلى رسومات وتصاميم تنفيذية دقيقة وواضحة. يشمل ذلك العمل اليدوي والرقمي لضمان جودة الرسومات وتوافقها مع المعايير المطلوبة، بالإضافة إلى تنظيم وحفظ جميع المخططات الهندسية.</p> <h3 >المهام والمسؤوليات الرئيسية</h3> <ul > <li >استلام مسودات الرسوم الهندسية ومناقشتها مع المهندس المختص لتفسيرها وإعداد الرسومات والتصاميم الهندسية والرسوم التنفيذية.</li> <li >رسم المخططات والرسوم التنفيذية يدوياً باستخدام أدوات وطاولة الرسم المتخصصة.</li> <li >إعداد المخططات الهندسية والرسوم التنفيذية باستخدام البرمجيات الهندسية على جهاز الحاسوب.</li> <li >تدقيق الرسومات وتقديمها للمهندس المختص، ثم إعداد الرسومات النهائية بناءً على توجيهاته.</li> <li >طباعة المخططات باستخدام برامج الحاسوب وبمقياس الرسم المطلوب لضمان الدقة.</li> <li >تصنيف وفهرسة وتوثيق وترتيب وحفظ المخططات الهندسية بشكل منهجي ومنظم.</li> </ul> <h3 >المؤهلات والخبرات</h3> <ul > <li >خبرة عملية تتراوح من 0 إلى 1 سنة في مجال الرسم الهندسي أو ما يعادله.</li> <li >القدرة على العمل باستخدام أدوات الرسم اليدوي والبرمجيات الهندسية.</li> <li >مهارات تواصل جيدة للتعامل مع المهندسين والفريق.</li> </ul> <h3 >بيئة العمل</h3> <p >يعمل الرسام الهندسي ضمن فريق في مقر الشركة بمدينة حائل، في بيئة مكتبية داعمة. الوظيفة بدوام كامل وتتطلب الالتزام بمهام الرسم والتصميم الهندسي.</p> <h3 >التقديم</h3> <p >للمهتمين بالانضمام إلى شركة برق العالمية القابضة كرسام هندسي، يرجى تقديم طلباتكم. سيتم التواصل مع المرشحين المؤهلين لمناقشة التفاصيل.</p></div>

<h3 >About Vanderlande and the Role</h3> <p >Vanderlande is a leading global provider of innovative and high-performance solutions for airport logistics. Our comprehensive portfolio includes products and solutions for baggage and cargo handling, advanced software for the digitalization of logistics processes, and an extensive range of maintenance and services. We serve renowned airports and airlines worldwide. We are currently seeking a <strong >Site Engineer Steel Structure</strong> to join our Project Execution team in Jeddah, Makkah, Saudi Arabia.</p> <h3 >Position Summary</h3> <p >The Site Engineer Steel Structure will provide essential support to the Site Manager regarding mechanical installation, commissioning, and maintenance of equipment across various projects in the region. This full-time role involves guiding sub-contractors, coordinating with internal departments, and supervising steel works to ensure project execution aligns with approved standards and practices within the industrial automation domain.</p> <h3 >Key Responsibilities</h3> <ul > <li >Support the Site Manager in mechanical installation, commissioning, and maintenance activities for project equipment.</li> <li >Guide and educate sub-contractors on installation best practices.</li> <li >Coordinate with the construction and procurement departments to identify required tools and consumables for site execution.</li> <li >Support and supervise the installation of steel works for projects.</li> <li >Prepare work packages for site installation teams.</li> <li >Support the proposals department with input for upcoming projects and share previously learned lessons.</li> <li >Monitor and report on site progress.</li> <li >Assist the quality team with inspections, closing out snag points, and facilitating eventual handover to the client.</li> <li >Identify potential risks for failures and implement preventive actions with the Engineering and Drafting teams to prevent defects in engineering deliverables.</li> <li >Implement and monitor all mechanical-related works at the site as per approved drawings and methods.</li> <li >Ensure adherence to occupational health, safety, security, environment, and quality practices.</li> </ul> <h3 >Required Qualifications and Experience</h3> <ul > <li >Bachelor’s degree in Mechanical Engineering.</li> <li >Minimum of <strong >5 years</strong> of professional experience in steel structure practices within the Industrial automation domain.</li> <li >Specific experience in Baggage Handling or Material Handling Systems is required.</li> </ul> <h3 >Essential Skills and Attributes</h3> <ul > <li >Strong knowledge of engineering analysis tools, mechanical design, and installation practices.</li> <li >Effective interpersonal skills, with the ability to engage internal and external stakeholders.</li> <li >Demonstrated ability to work effectively within multiple cultural teams.</li> </ul> <h3 >Work Environment and Location</h3> <p >This is a full-time position based in Jeddah, Makkah, Saudi Arabia. The role requires a willingness to work on projects across various locations within KSA as needed. Salary for this position will be discussed during the interview process.</p>

<h3 >About Vanderlande and the Role</h3> <p >Vanderlande is a leading global provider of innovative and high-performance solutions for airport logistics. Our comprehensive portfolio includes products and solutions for baggage and cargo handling, advanced software for the digitalization of logistics processes, and an extensive range of maintenance and services. We serve renowned airports and airlines worldwide. We are currently seeking a <strong >Site Engineer Steel Structure</strong> to join our Project Execution team in Jeddah, Makkah, Saudi Arabia.</p> <h3 >Position Summary</h3> <p >The Site Engineer Steel Structure will provide essential support to the Site Manager regarding mechanical installation, commissioning, and maintenance of equipment across various projects in the region. This full-time role involves guiding sub-contractors, coordinating with internal departments, and supervising steel works to ensure project execution aligns with approved standards and practices within the industrial automation domain.</p> <h3 >Key Responsibilities</h3> <ul > <li >Support the Site Manager in mechanical installation, commissioning, and maintenance activities for project equipment.</li> <li >Guide and educate sub-contractors on installation best practices.</li> <li >Coordinate with the construction and procurement departments to identify required tools and consumables for site execution.</li> <li >Support and supervise the installation of steel works for projects.</li> <li >Prepare work packages for site installation teams.</li> <li >Support the proposals department with input for upcoming projects and share previously learned lessons.</li> <li >Monitor and report on site progress.</li> <li >Assist the quality team with inspections, closing out snag points, and facilitating eventual handover to the client.</li> <li >Identify potential risks for failures and implement preventive actions with the Engineering and Drafting teams to prevent defects in engineering deliverables.</li> <li >Implement and monitor all mechanical-related works at the site as per approved drawings and methods.</li> <li >Ensure adherence to occupational health, safety, security, environment, and quality practices.</li> </ul> <h3 >Required Qualifications and Experience</h3> <ul > <li >Bachelor’s degree in Mechanical Engineering.</li> <li >Minimum of <strong >5 years</strong> of professional experience in steel structure practices within the Industrial automation domain.</li> <li >Specific experience in Baggage Handling or Material Handling Systems is required.</li> </ul> <h3 >Essential Skills and Attributes</h3> <ul > <li >Strong knowledge of engineering analysis tools, mechanical design, and installation practices.</li> <li >Effective interpersonal skills, with the ability to engage internal and external stakeholders.</li> <li >Demonstrated ability to work effectively within multiple cultural teams.</li> </ul> <h3 >Work Environment and Location</h3> <p >This is a full-time position based in Jeddah, Makkah, Saudi Arabia. The role requires a willingness to work on projects across various locations within KSA as needed. Salary for this position will be discussed during the interview process.</p>

<h3 >About the Role</h3> <p >SAMI Airbus is seeking a <strong >Senior Technical Services Engineer</strong> to join our team in Riyadh, with operations extending to Al-Kharj. This full-time position is crucial for ensuring optimal in-service maintenance solutions for our customer's A330MRTT fleet. The primary objective of this role is to provide comprehensive engineering and technical support to the MRO Depot maintenance activities, thereby maintaining the airworthiness of the fleet in strict accordance with manufacturer standards and regulatory requirements.</p> <h3 >Key Responsibilities</h3> <ul > <li >Provide engineering and technical support to MRO and other relevant departments during aircraft maintenance checks at both Airframe and Component levels, with strong expertise in Aircraft Systems, Avionics, and Powerplant systems.</li> <li >Review and ensure compliance of customer-specified works, including AD, SB, VSB, MPD tasks, and other technical publications, for proper embodiment during maintenance checks. Prepare Engineering Orders (EO) and Job Instruction documents as required.</li> <li >Offer technical support to other departments concerning Spare Parts, Modification Kits, Materials, and Tools.</li> <li >Navigate OEM portals to retrieve applicable technical publication data necessary for maintenance checks.</li> <li >Review and resolve technical queries arising from routine or non-routine tasks that necessitate further technical support from Engineering or the OEM.</li> <li >Report damage mapping and in-service issues to the OEM through Tech Request Dossiers and Service Requests, subsequently obtaining approved maintenance data and documents.</li> <li >Define the scope of work through 'Statement of Work' documents for maintenance and inspection tasks sub-contracted to working parties or service providers.</li> <li >Specify appropriate tooling and Ground Support Equipment (GSE) required during maintenance checks, and propose or define alternate tooling solutions within the EASA framework.</li> <li >Prepare capability development plans and obtain approvals for in-house shop repairs and inspections.</li> <li >Ensure mandatory and non-mandatory retrofits and modifications are performed on aircraft and components, and report their embodiment to the Customer or OEM as necessary.</li> <li >Collaborate with the planning department to establish control documents for Deferrals, Inspection Requirements, Aircraft Damage Charts, and Structural Inspection Requirements.</li> <li >Represent the department in inter-department meetings, provide updates on the DeMAT management system, highlight or escalate issues as necessary, and perform other tasks as delegated by the Technical Director or assigned Manager.</li> </ul> <h3 >Required Qualifications</h3> <ul > <li >Bachelor’s Degree in Aeronautical, Mechanical, or Aerospace Engineering.</li> <li >Type Trainings (Level 1) for A320, A330, A340, A330MRTT, or GE CF6-80E1 engines.</li> <li >Proficiency in the English language, specifically in technical and aeronautical contexts.</li> <li >Demonstrated knowledge and proficiency in reading and interpreting Maintenance Manuals (Aircraft, Engine, Component), OEM portals (*, AirbusWorld), and various Technical Publications (AD, SB, VSB, SIL, ISI, TFU).</li> <li >Advanced user of the Microsoft Office suite.</li> </ul> <h3 >Experience and Technical Expertise</h3> <ul > <li >At least <strong >five (5) years</strong> of relevant work experience in aviation, specifically as a CAMO Engineer or MRO Technical Support Engineer.</li> <li >A minimum of <strong >two (2) years</strong> of this experience must be in engineering and maintenance for an OEM or the Airbus A320/A330/A340 Family, with a preference for experience on Airbus Military platforms such as A330MRTT or A400M.</li> <li >Thorough knowledge of Part 145 and Part M (Part-CAMO / Part-CAO) regulations under EASA, FAA, or GACA.</li> <li >Previous training in critical aviation safety areas including CDCCL/Fuel Tank Safety, CAME, EWIS, Human Factors, and Safety Management Systems (SMS).</li> </ul> <h3 >Professional Attributes</h3> <ul > <li >Highly organized, punctual, and structured approach to managing tasks and priorities.</li> <li >Analytical mindset with proven problem-solving capabilities and an objectives-oriented approach.</li> <li >Demonstrated problem-solving and decision-making skills in daily operational scenarios.</li> <li >Commitment to the highest standards of quality, reliability, and safety.</li> <li >Exhibits autonomy and proactivity, taking initiative within the Quality Management System (QMS) scope, driving solutions, or clearly presenting issues for escalation while working independently with line management.</li> <li >Clear and effective communication skills for interaction across multicultural teams and stakeholders.</li> <li >Strong and collaborative team player, fostering trust and accountability within and across departments and with customers.</li> </ul> <h3 >Work Environment and Location</h3> <p >This is a full-time position based in Riyadh, with responsibilities extending to Al-Kharj. We invite qualified candidates to apply and contribute to our mission of maintaining aviation excellence.</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <b>Job Description</b>Overview<p>AtkinsRéalis is seeking an experienced Landscape Engineer to support the design review, construction supervision, quality assurance, and delivery of landscape and public realm works for major high-rise residential, commercial, hospitality, mixed-use, and large-scale urban developments in Madinah, Saudi Arabia. The successful candidate will oversee landscape construction activities, ensure compliance with project specifications and sustainability objectives, and coordinate with multidisciplinary teams to deliver high-quality outdoor environments.</p><br>Your role<ul><li>Review and supervise landscape construction works for high-rise developments, mixed-use projects, hospitality facilities, and public realm areas.</li><li>Ensure landscape works are executed in accordance with approved drawings, specifications, project requirements, and Saudi regulations.</li><li>Review and approve landscape material submittals, plant schedules, shop drawings, samples, and mock-ups.</li><li>Conduct regular site inspections to verify construction quality and compliance with approved standards.</li><li>Review contractor method statements, inspection requests, testing records, and quality documentation.</li><li>Monitor plant procurement, delivery, storage, and installation activities.</li><li>Ensure proper implementation of irrigation systems, drainage systems, and water conservation measures.</li><li>Verify compliance with sustainability requirements and landscape design objectives.</li><li>Coordinate landscape works with architectural, civil, structural, MEP, and infrastructure disciplines.</li><li>Identify and resolve landscape construction issues and provide technical recommendations.</li><li>Ensure compliance with health, safety, environmental, and quality requirements during landscape construction activities.</li><li>Witness testing and commissioning of irrigation systems, pumps, controls, and related infrastructure.</li><li>Monitor contractor progress and support project schedule management.</li><li>Participate in technical meetings, design coordination workshops, and progress review meetings.</li><li>Review variations, technical queries, and landscape-related change requests.</li><li>Support testing, snagging, de-snagging, and handover activities.</li><li>Prepare landscape inspection reports, progress reports, and technical assessments.</li><li>Assist in the implementation of sustainable landscape practices, native planting strategies, and water-efficient solutions.</li><li>Coordinate with local authorities and stakeholders where required.</li></ul>About you<ul><li>Bachelor's Degree in Landscape Engineering, Landscape Architecture, Agricultural Engineering, Civil Engineering, or a related discipline.</li><li>Master's Degree in Landscape Architecture, Environmental Design, or a related field is preferred.</li><li>Professional registration with the Saudi Council of Engineers (SCE) is preferred.</li><li>Professional certifications related to landscape design, irrigation systems, or sustainability are advantageous.</li><li>Membership in a recognized professional institution is desirable.</li><li>10 to 15 years of professional experience in landscape engineering and construction supervision.</li><li>Minimum 5 years of experience on major high-rise, mixed-use, or large-scale urban development projects.</li><li>Previous experience in Saudi Arabia or GCC countries is highly preferred.</li><li>Experience working with consultants, PMCs, developers, and contractors.</li><li>Demonstrated experience from design review through construction and project handover.</li><li>Experience reviewing landscape drawings, specifications, material submittals, and technical documentation.</li><li>Knowledge of arid climate landscaping and native plant species suitable for Saudi Arabia is highly desirable.</li></ul><span>Rewards &amp; benefits</span><p><span>Explore the rewards and benefits that help you thrive – at every stage of your life and your career.</span></p><br><p><span>This includes:</span></p><br><ul><li>Tax-free salary.</li><li>Life insurance coverage.</li><li>Medical insurance.</li><li>Annual leave balance.</li><li>Company gratuity scheme.</li><li>Discretionary bonus program.</li><li>Annual flight contribution.</li><li>Transportation &amp; housing allowances.</li><li>Employee Wellbeing Program: 24/7 access to specialists in finance, legal matters, family care, personal health, fitness, and nutrition.</li></ul><p><span>Seize every opportunity to sharpen your skills, expand your expertise, and be recognized for the impact you make.</span></p><br><span>About AtkinsRéalis</span><p><span>We're AtkinsRéalis, a world-class engineering services and nuclear organization. We connect people, data and technology to transform the world's infrastructure and energy systems. Together, with our industry partners and clients, and our global team of consultants, designers, engineers and project managers, we can change the world. We're committed to leading our clients across our various end markets to engineer a better future for our planet and its people. </span></p><br><p><span>Find out more.</span></p><br><p><b>#Med</b></p><br><b>Worker Type</b>Employee<b>Job Type</b>Regular<p><span><i>At </i></span> <i><span>AtkinsRéalis</span></i><span><i>, we seek to hire individuals with diverse characteristics, backgrounds and perspectives. We strongly believe that world-class talent makes no distinctions based on gender, ethnic or national origin, sexual identity and orientation, age, religion or disability, but enriches itself through these differences. &nbsp;</i></span></p><br> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> No experience required </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

<h3 >About alfanar</h3> <p >alfanar, headquartered in Riyadh, Saudi Arabia, is a diversified company with operations spanning construction, manufacturing, design &amp; development centers, and various facilities across the Middle East and internationally. The company is actively involved in Electrical, Electromechanical, and Civil Engineering Construction, manufacturing and marketing electrical construction products, and providing allied engineering services. alfanar Construction is recognized as a Grade I contractor by the Government of Saudi Arabia, functioning as an Engineering, Procurement, and Construction (EPC) company with a strong track record in the Energy, Infrastructure, and Engineering Services sectors. Its core EPC activities include Power and Water Projects, Transmission and Distribution Projects, Building Construction (Industrial &amp; Commercial) Projects, and Electro-Mechanical projects.</p> <h3 >The Opportunity</h3> <p >alfanar is seeking a <strong >Civil QA/QC Engineer</strong> to join its team in Dammam. This full-time position is critical for performing project civil Quality Control and Quality Assurance activities. The role ensures that all operations are conducted efficiently, in a timely manner, and in strict adherence to quality standards as defined by company policies and procedures, thereby contributing to departmental operational plans and developments.</p> <h3 >Key Responsibilities</h3> <ul > <li >Implement the Quality Management System (QMS) for project quality inspection and coordinate quality-related activities with clients, consultants, and vendors.</li> <li >Maintain system manuals, international and national standards, client specifications, technical data sheets, product catalogues, and all relevant inspection documents.</li> <li >Verify accreditations, certifications, approvals, and profiles of vendors and external agencies.</li> <li >Manage quality records, including logbooks, QA/QC weekly reports, internal inspection reports, and Non-Conformance Reports (NCRs).</li> <li >Prepare quality-related documents such as Inspection and Test Plans (ITP), Method of Statements (MOS), Checklists, and QA/QC weekly reports.</li> <li >Ensure works are executed according to Project Technical Specifications (PTS), Issued For Construction (IFC) drawings, and approved method statements.</li> <li >Confirm proper inspection of works at required stages as per ITP or client requirements, and ensure all materials and equipment comply with contract specifications.</li> <li >Oversee site installation inspections, material receiving inspections, and report findings to the concerned authority.</li> <li >Assure the maintenance and calibration of inspection and testing equipment, and carry out inspections and testing as per plan.</li> <li >Prepare Checklists and Requests for Information (RFIs) for consultant approval and inspections.</li> <li >Coordinate with the Execution Team, Project Management, Client, and Consultant on all QC-related matters.</li> <li >Liaise with independent testing laboratories for material testing, follow up on test reports, and submit them to the consultant.</li> <li >Report quality-related matters to the Project Manager for necessary action and to the TQM Manager for information.</li> <li >Obtain, verify, and maintain quality records in a traceable, easily retrievable, and secure manner, including proper logging of QC documents.</li> </ul> <h3 >Leadership and Operational Accountabilities</h3> <ul > <li >Provide leadership, coaching, and direction to subordinates, ensuring fair task distribution and effective team performance.</li> <li >Perform planned activities to meet operational and development targets within delivery schedules, utilizing resources effectively.</li> <li >Resolve operational problems and escalate complex issues as required.</li> <li >Ensure adherence to quality requirements and develop effective quality control processes.</li> <li >Coordinate well-defined written systems, policies, and procedures, actively seeking automation opportunities.</li> <li >Comply with all relevant company policies, procedures, and work instructions.</li> <li >Ensure compliance with safety, quality, and environmental management procedures within the defined work area.</li> </ul> <h3 >Qualifications and Experience</h3> <ul > <li >A minimum of <strong >5 to 10 years</strong> of relevant experience in a QA/QC Civil engineering role.</li> <li >Demonstrated ability to implement Quality Management Systems and ensure compliance with project specifications and international standards.</li> <li >Strong coordination and communication skills for liaising with various stakeholders including clients, consultants, and internal teams.</li> </ul> <h3 >Work Environment</h3> <p >This is a <strong >full-time</strong> position based in Dammam, Saudi Arabia, within a dynamic construction and engineering environment. The role requires active participation in project sites and coordination with various teams to ensure quality assurance and control throughout project lifecycles.</p>

<h3 >About the Role</h3> <p >WETICO, a part of Abunayyan Holding, is seeking a <strong >Lead Production Engineer</strong> to join its team in Riyadh, Saudi Arabia. This full-time role involves leading a team of production engineers and overseeing the technical execution of fabrication, welding, and assembly for oil &amp; gas, petrochemical, and water-treatment packages. The Lead Production Engineer is responsible for ensuring compliance with technical specifications and international codes, while driving productivity and quality standards.</p> <h3 >Key Responsibilities</h3> <ul > <li >Coordinate and supervise production engineers across various fabrication areas, providing mentorship and development.</li> <li >Translate engineering drawings and specifications into executable job packs and detailed cutting/fit-up plans.</li> <li >Plan and sequence production activities to optimize resource utilization and meet project schedules.</li> <li >Ensure strict adherence to approved Welding Procedure Specifications (WPS/PQR) and relevant codes such as Aramco, ASME, API, and AWS.</li> <li >Prepare and review method statements, Inspection and Test Plans (ITPs), and technical calculations.</li> <li >Monitor production progress, productivity, and rework rates, and resolve technical execution issues promptly.</li> <li >Investigate non-conformities and implement effective corrective and preventive actions.</li> <li >Interface with Quality Control (QC) teams regarding inspection stages, Non-Destructive Testing (NDT), and dimensional control.</li> <li >Support man-hour estimation and material take-off for planning and costing purposes.</li> <li >Enforce Health, Safety, and Environment (HSE) requirements and safe execution methods on the production lines.</li> <li >Drive continuous improvement initiatives, including 5S and Lean methodologies.</li> <li >Report technical progress and issues directly to the Production Manager.</li> <li >Perform additional duties as assigned within the scope of the role.</li> </ul> <h3 >Required Qualifications and Experience</h3> <ul > <li >Minimum of <strong >8 years of experience</strong> in a world-class or Aramco-tier fabrication environment, including involvement in complex and critical projects.</li> <li >Accredited Bachelor's degree in Mechanical or Production Engineering is required; a Master's degree is preferred.</li> <li >Demonstrated expertise in digital engineering/production systems and World Class Manufacturing (WCM) / Lean methodologies.</li> <li >Proven track record of achieving Key Performance Indicators (KPIs) related to first-time-right quality, productivity, and zero-incident performance.</li> </ul> <h3 >Technical Skills and Certifications</h3> <ul > <li >Mandatory certifications include <strong >CSWIP / AWS-CWI</strong>, <strong >Lean Six Sigma Black Belt</strong>, and <strong >NEBOSH</strong>.</li> <li >PMP certification is preferred.</li> </ul> <h3 >Work Environment and Expectations</h3> <p >This role operates within a demanding fabrication environment focused on delivering complex and critical projects for the oil &amp; gas, petrochemical, and water-treatment sectors. The successful candidate will be expected to uphold stringent quality and safety standards, contribute to continuous improvement initiatives, and ensure operational excellence in all production activities.</p> <h3 >Application Process</h3> <p >Interested candidates who meet the specified requirements are encouraged to apply for this full-time position in Riyadh, Saudi Arabia.</p>

The Junior Electrical Engineer supports the delivery of electrical works by assisting in the review, coordination, and implementation of design and construction activities on site. Working under the guidance of the Senior Electrical Engineer and reporting to the Design Manager, the role contributes to shop drawing reviews, site inspections, technical documentation, and multidisciplinary coordination to ensure works are executed in accordance with approved drawings, specifications, and project requirements. The role is primarily site-focused, with responsibility for resolving day-to-day construction issues and supporting technical workflows. As part of this, the Electrical Engineer is expected to actively contribute to drafting, detailing, and preparation of sketches, mark-ups, and redline drawings using CAD/BIM tools where required (e.g., cable routing adjustments, containment coordination, temporary power solutions), ensuring timely and practical solutions without over-reliance on dedicated drafting resources. DUTIES PREFORMED % of Time Key Accountabilities Key Activities 30% Site & Construction Support (Electrical) Provide day-to-day electrical engineering support on site, addressing construction queries, RFIs, and technical clarifications. Review electrical works (power distribution, lighting, ELV systems, containment, earthing) to verify compliance with approved drawings and specifications. Identify electrical site issues, discrepancies, or non-conformances and report to the Senior Electrical Engineer. Coordinate electrical activities with architectural, structural, mechanical, and fit-out works to avoid clashes and execution conflicts. Support inspections, testing, and commissioning activities for electrical systems. Prepare and update sketches, mark-ups, and simple electrical drawings/details using CAD tools to support site execution. Assist in producing redline drawings and as-built markups based on actual site conditions. Provide hands-on drafting support (Auto CAD/Revit/BIM tools) when required to resolve site issues efficiently. Ensure all sketches/drawings issued are clear, coordinated, and aligned with approved design intent. 25% Shop Drawings, Submittals & As-Built Management Review electrical shop drawings, material submittals, and method statements under supervision. Ensure compliance with design intent, specifications, and project standards. Assist in preparing technical comments and tracking submittal status. Verify that approved shop drawings and materials are correctly implemented on site. Support preparation and validation of electrical as-built drawings and documentation. 20% Technical Queries, RFIs & NCR Management Assist in preparing responses to RFIs, Technical Queries (TQs), and site clarifications. Support investigation and close-out of NCRs, observations, and quality issues. Coordinate with the Senior Electrical Engineer to resolve technical and coordination issues. Maintain records of technical correspondence and site decisions. 15% Coordination & Communication Coordinate with site engineers, subcontractors, and suppliers on electrical matters. Interface with other disciplines (Architectural, Structural, Mechanical, etc.) for coordinated delivery. Attend coordination meetings and provide updates to senior team members. Ensure proper use of document control systems and project workflows. 10% Continuous Improvement & Knowledge Sharing Develop knowledge of electrical systems, installation practices, and coordination processes. Support lessons learned and continuous improvement initiatives. Seek guidance from senior engineers and contribute to team knowledge sharing. Promote best practices in electrical construction quality and execution. <br><br>WORK CONTACTS Internal External Senior Electrical Engineer Lead Design Consultant (Electrical) – as required MEPF Design/ Technical Manager Subconsultants Technical Director Electrical Subcontractors Discipline Engineers (Architectural, Structural, Mechanical) Vendors / Suppliers Technical Coordinators Authorities Having Jurisdiction (AHJs) Construction / Operations Team <br>BIM Team <br>Procurement Team <br>QA/QC Team <br>Document Control Team <br><br>WORKING CONDITIONS Working Environment Site office Degree of Risk - Physical Low to Medium Risk <br>JOB SPECIFICATIONS Industry / Domain Design & Build projects involving electrical systems (power, lighting, ELV) Multidisciplinary coordination across design and construction phases Complex building or infrastructure projects requiring integrated MEP delivery Necessary Knowledge and Experience Minimum 4–7 years of relevant experience in electrical engineering within construction or design-build environments Experience supporting electrical works including power, lighting, and ELV systems Basic understanding of multidisciplinary coordination and construction workflows Familiarity with shop drawings, RFIs, and site execution processes Good command of English (written and spoken) Education and Certification Minimum Requirements Bachelor’s degree in electrical engineering Professional certification is an advantage but not mandatory Job Specific and Technical Skills Proficient in Auto CAD, Revit, and BIM coordination tools Ability to produce and modify basic electrical drawings and details to support site delivery Strong understanding of electrical systems (power, lighting, ELV, containment, earthing) Ability to interpret and review electrical drawings and specifications Familiarity with coordination workflows and document control systems Good organizational and documentation skills Strong attention to detail and problem-solving ability

<h3 >About Dussmann-Ajlan &amp; Bros</h3> <p >Dussmann-Ajlan &amp; Bros is seeking an FM Engineer to join its team at the Headquarters in Riyadh, Saudi Arabia. This <strong >full-time</strong> position offers an opportunity to contribute to facility management operations within the region, focusing on technical oversight and compliance.</p> <h3 >The Role: FM Engineer</h3> <p >The FM Engineer will be responsible for managing technical inspection teams, providing essential technical support, and ensuring adherence to contract specifications and quality standards in facility management delivery. This role is suitable for candidates with <strong >0-1 years of experience</strong> in a relevant field, aiming to maintain high operational efficiency and quality across projects in KSA.</p> <h3 >Key Responsibilities</h3> <ul > <li >Manage the technical inspection team across KSA projects in the region.</li> <li >Provide technical support to inspection teams.</li> <li >Support the contracts management team on all relevant technical specifications, scopes, QA/QC requirements, and operating procedures in FM delivery.</li> <li >Ensure CAFM Asset Lists and Planned Maintenance Schedules are up to date, and that service providers fully adhere to CAFM PMS compliance.</li> <li >Ensure effective levels of communication and coordination on FM projects.</li> <li >Conduct weekly meetings with inspectors and service providers and follow up on pending tasks.</li> <li >Liaise with Customers and Service Providers as required for resolution of site issues, including concerned authorities when necessary.</li> <li >Monitor and support inspection teams on planned and reactive maintenance works for compliance against contract requirements and best practice FM delivery.</li> <li >Conduct random site audits to prescribed checklists for Hard and Soft services, inclusive of Health and Safety and regulatory compliance.</li> <li >Conduct site condition surveys and submit written reports as per client expectations.</li> <li >Ensure the effectiveness of the QA/QC inspection team aligns with agreed Site Inspection Procedures and client expectations.</li> <li >Execute and monitor the QA/QC process for all maintenance works within the contract to ensure facilities and equipment are maintained to the required standards of quality and availability.</li> <li >Coordinate monthly performance evaluation with the HillFM manager to ascertain the level of contractor's conformity with the contract scope of work as well as general terms and conditions.</li> <li >Prepare reports by collecting, analyzing, and summarizing information and trends.</li> <li >Interact with the client's QA department, customer service, CAFM helpdesk team, and service providers for continuous improvement.</li> <li >Participate in reviewing Close-Out Reports on any capital works as submitted by Contractors.</li> <li >Review service provider invoices and verify payments, submitting them to the FM manager.</li> <li >Report any quality issues that might have a counter effect on time, cost, or operational impact on the client's business in a timely manner. Initiate remedial action for contract non-conformities through the issuance of Non-Conformity Reports (NCRs) and submit to the FM manager.</li> <li >Respond to client emergencies.</li> <li >Coordinate with the HSE team to ensure health and safety measures are always implemented.</li> <li >Inform themselves of the relevant Quality, Environmental, Safety and Occupational Health Policies, Manuals and Procedures in place within Hill International, and ensure continued compliance with these requirements.</li> <li >Perform other duties as assigned by the line manager/supervisor.</li> </ul> <h3 >Required Qualifications and Skills</h3> <ul > <li >Strong knowledge of facility management principles, practices, and industry standards.</li> <li >Experience in delivering SLAs &amp; KPIs via a CAFM system, preferably FSI, and exposure to performance management contracts in FM.</li> <li >Experience in FM contract scope of work in both Hard and Soft Services.</li> <li >Strong communication and interpersonal skills, with the ability to collaborate effectively with diverse stakeholders.</li> <li >Demonstrated leadership and team management skills, with the ability to motivate and inspire a team.</li> <li >Proficiency in MS Office programs including <strong >Excel, Access, and PowerPoint</strong>, with the ability to create quality technical reports.</li> </ul> <h3 >Preferred Qualifications</h3> <ul > <li >Candidates with Health and Safety training such as <strong >IOSH/NEBOSH</strong> are preferred.</li> <li >A degree in Business, Asset Management, Electrical Engineering, or Mechanical Engineering is preferred.</li> </ul> <h3 >Application Information</h3> <p >Dussmann-Ajlan &amp; Bros invites qualified candidates to apply for this full-time FM Engineer position based in Riyadh, Saudi Arabia.</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>We are looking for a <b>MEP Quality Engineer</b> to join our team in Riyadh and be part of one of Saudi Arabia's giga projects</p><p><br></p><p><b>SUMMARY:</b></p><p>The <b>MEP Quality Engineer</b> is responsible for ensuring that all Mechanical, Electrical, and Plumbing (MEP) installations meet the highest quality standards, project specifications, and local/international codes. This role bridges the gap between on-site execution, material approvals, and final handover.</p><p><br></p><p><br></p><p><b>RESPONSABILITY:</b></p><ul><li>Implement and monitor QA/QC activities for Mechanical, Electrical, and Plumbing (MEP) works.</li><li>Review material submittals, method statements, ITPs, shop drawings, and technical submissions.</li><li>Coordinate WIRs, MIRs, inspections, and testing with the Consultant/PMC.</li><li>Ensure MEP installations comply with project specifications, approved drawings, applicable codes, and quality standards.</li><li>Raise, monitor, and close NCRs, observations, and corrective/preventive actions.</li><li>Coordinate testing, pre-commissioning, commissioning, and final handover activities.</li><li>Prepare and maintain QA/QC documentation, inspection records, and quality reports.</li></ul> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><ul><li>Bachelor’s degree in mechanical or electrical engineering.</li><li>Minimum 7–10 years of QA/QC experience in MEP works for large-scale building, infrastructure, or public realm projects.</li><li>Strong knowledge of international codes and standards, Saudi Building Code (SBC), ASME, ASTM, NFPA, IEC, and project specifications.</li><li>Experience in preparing and reviewing PQP, ITPs, Method Statements, Material Submittals, WIRs/MIRs, NCRs, and commissioning documentation.</li><li>Proficient in Microsoft Office and AutoCAD; familiarity with BIM/Revit is an advantage.</li><li>Valid Saudi Council of Engineers (SCE) registration is preferred.</li><li>ISO 9001 Internal Auditor certification is an added advantage.</li><li>Excellent communication, coordination, reporting, and problem-solving skills.</li><li>Candidates available for immediate joining or mobilization will be given preference.</li></ul><p><br></p></div>

<p>The Senior Architect will be part of the PMC team responsible for overseeing architectural works during the post-contract stage of the Sports Boulevard Project in Riyadh. The role will focus on reviewing contractor submissions, conducting site inspections, ensuring compliance with project requirements, and supporting ongoing design coordination activities. The successful candidate will act as a key client-facing representative and provide technical leadership throughout the construction phase.</p><p>Review and provide technical comments on MAR's architectural shop drawings and related submissions. Review material submittals, method statements, RFIs, and architectural technical documentation. Conduct regular site inspections to verify compliance with approved drawings, specifications, and quality standards. Monitor architectural works during construction and identify design or execution-related issues. Coordinate with contractors, consultants, and project stakeholders to resolve technical matters. Support ongoing design development and design coordination during the construction phase. Participate in progress meetings, technical workshops, and coordination sessions. Prepare inspection reports, technical assessments, and project updates. Deliver ad-hoc presentations to clients and senior project stakeholders as required. Ensure architectural works are executed in accordance with project requirements, design intent, and applicable standards.</p><p><strong>Desired Candidate Profile</strong></p><p>Bachelor's Degree in Architecture. Minimum 12+ years of relevant experience in architectural design, construction supervision, and project delivery. Strong experience working within PMC/PMCM environments on major development projects. Proven post-contract experience with exposure to projects where design activities continue during construction. Extensive experience reviewing MAR/Contractor shop drawings and technical submissions. Strong construction supervision and site inspection experience. Client-facing experience with the ability to confidently engage senior stakeholders. Excellent presentation and communication skills, including the ability to prepare and deliver ad-hoc presentations. Proficiency in AutoCAD and architectural drawing review processes. Strong understanding of construction methodologies, architectural detailing, quality assurance, and project coordination.</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Leverage your expertise and join the dynamic team of a leading Saudi contractor focused on high-quality large-scale residential projects in Saudi Arabia. As a Senior QA/QC Architecture Engineer , you will be responsible for leading all architectural quality assurance and quality control activities throughout the project lifecycle. You will ensure that all architectural works comply with project specifications, approved drawings, contract requirements, local regulations, and international quality standards while promoting a culture of quality across project teams. Key Accountabilities The position involves: Lead all architectural QA/QC activities across assigned construction projects. Develop, implement, and maintain the Project Quality Plan (PQP), Inspection &amp; Test Plans (ITPs), Method Statements, and quality procedures. Ensure all architectural works comply with project specifications, approved shop drawings, contract requirements, and applicable codes and standards. Review and approve material submittmits, method statements, inspection requests (IRs), and technical documentation. Conduct regular site inspections, quality audits, and surveillance to ensure compliance with project quality requirements. Monitor architectural finishing works including blockwork, plastering, waterproofing, flooring, ceilings, painting, cladding, facades, doors, windows, and all architectural finishes. Identify non-conformance issues (NCRs), lead root cause analysis, and ensure timely implementation of corrective and preventive actions (CAPA). Coordinate with Consultants, Contractors, Technical Office, Construction, and Project Management teams to resolve quality issues. Monitor subcontractors' quality performance and ensure compliance with approved quality standards. Prepare quality reports, KPIs, dashboards, and management presentations. Ensure all inspection and testing records are properly maintained and documented. Participate in project handover, snagging, de-snagging, and final acceptance inspections. Lead and mentor QA/QC Engineers and Inspectors while promoting continuous quality improvement initiatives.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Bachelor's degree in Architecture Engineering. 10+ years of experience in QA/QC for architectural works within large-scale construction projects. Proven experience leading QA/QC activities for residential, hospitality, commercial, or mixed-use developments. Strong knowledge of ISO 9001 Quality Management System. Experience preparing and implementing Project Quality Plans (PQP), ITPs, Method Statements, and QA/QC documentation. Strong experience in architectural finishes inspection and quality management. Experience coordinating with consultants, contractors, and project teams. Strong understanding of project specifications, local building regulations, and international quality standards. Proficiency in AutoCAD, Microsoft Office, and QA/QC documentation systems. Excellent communication, leadership, reporting, and stakeholder management skills. Fluent in English (Arabic is an advantage for GCC projects).</p><p></p></section>

Role Summary: The Mechanical Quality Engineer (Piping, Welding, Coating & NDT) is responsible for assuring and controlling the quality of piping fabrication and installation, welded joints, protective coating systems, and non-destructive testing activities for the JESCO / Arcelor Mittal Tubular Products Al-Jubail Heat Treatment and Finishing Line Project. The role provides owner-side surveillance of EPC contractors, subcontractors, vendors, and third-party inspection agencies from material receipt and fabrication through erection, testing, pre-commissioning, turnover, and final dossier close-out. The incumbent ensures compliance with approved project specifications, drawings, Inspection and Test Plans, welding and coating procedures, applicable Saudi requirements, and relevant ASME, API, ASTM, AWS, ISO, SSPC/AMPP, and ASNT standards.<br>Job Duties & Responsibilities:Review and approve contractor quality documents, including Project Quality Plans, Inspection and Test Plans, method statements, field inspection checklists, welding procedure specifications and qualification records, NDT procedures, coating procedures, pressure-test packages, and turnover dossiers. Perform surveillance and inspection of shop and field piping activities, including material receiving, identification and traceability, storage and preservation, fit-up, joint preparation, welding, supports, flange alignment, bolt tightening, cleanliness, reinstatement, and system completion. Verify piping materials, fittings, flanges, valves, gaskets, welding consumables, and coating materials against approved drawings, specifications, purchase orders, material requisitions, MTCs, heat numbers, and positive material identification requirements. Witness and verify welder and welding-operator qualifications, WPS/PQR compliance, welding consumable control, preheat and inter pass temperature, heat input, joint sequencing, visual inspection, weld repair, and post-weld heat treatment activities where applicable. Coordinate and monitor NDT activities, including VT, PT, MT, UT, RT, and advanced methods when specified; verify technician certification, equipment calibration, technique sheets, examination coverage, acceptance criteria, reports, film or digital-image quality, and repair-cycle closure. Inspect surface preparation and coating application, including environmental conditions, abrasive and coating batch control, surface cleanliness and profile, stripe coating, wet and dry film thickness, holiday testing, adhesion testing, curing, repair, and final acceptance in accordance with the approved coating system. Witness piping pressure and leak testing, line flushing or blowing, drying, chemical cleaning where applicable, valve testing, punch-list clearance, and reinstatement; confirm calibrated test instruments, test boundaries, temporary supports, safety controls, and complete test records. Review isometric drawings, P&IDs, line lists, plot plans, weld maps, spool drawings, support details, vendor drawings, specifications, and approved technical queries to confirm construction and inspection compliance. Raise inspection observations and Non-Conformance Reports for deviations; support root-cause analysis, corrective and preventive actions, concession or repair review, verification of implementation, and timely close-out. Maintain inspection status, weld and NDT traceability, coating records, NCR and punch-list logs, quality KPIs, and weekly progress reports; identify recurring defects and recommend preventive improvement actions. Coordinate with Project Management, Engineering, Construction, HSE, Operations, EPC contractors, vendors, authorized inspectors, and third-party agencies to resolve quality issues without compromising safety, code compliance, or project schedule. Support mechanical completion, system handover, pre-commissioning, and final quality dossier review, ensuring all records are complete, legible, traceable, approved, and aligned with the project turnover index.<br>Education & Experience:Bachelor’s degree in mechanical engineering or equivalent discipline Minimum 8-10 years of QA/QC experience in piping, welding, coating, and NDT for industrial construction, steel, oil and gas, petrochemical, power, or process-plant projects. At least 3 years in an owner, client, PMC, or lead site-quality role supervising EPC contractors, subcontractors, and third-party inspection agencies. Demonstrated field experience with carbon steel, stainless steel, and alloy-steel piping fabrication and installation, welding control, NDT coordination, coating inspection, pressure testing, and turnover documentation. Experience reviewing and implementing ITPs, WPS/PQRs, welder qualifications, NDT procedures, coating procedures, inspection requests, test packs, NCRs, punch lists, and final manufacturing or construction dossiers. Experience on Heat Treatment and Finishing Line, steelmaking, pipe manufacturing, or comparable heavy-industrial projects is preferred; Saudi Arabia or GCC project experience is an advantage.<br>Skills:Excellent technical knowledge and quality-control skills Strong leadership and contractor-management abilities Effective communication, reporting, and coordination skills Strong analytical, problem-solving, and decision-making abilities Good planning, organization, teamwork, and time-management skills