وظائف مهندس الكترونيات في السعودية

Summary:We are looking for a BMS Engineer to join our team and support the execution, installation supervision, testing, commissioning, and handover of Building Management System works. The candidate should have practical site experience, strong technical understanding of BMS field devices and controllers, HVAC systems and the ability to coordinate effectively with project stakeholders. <br>Job Overview: Position: BMS Engineer Work Location: Projects Employment Focus: Site supervision, testing, commissioning, configurations, troubleshooting, documentation, and handover support Preferred Scope: BMS installations, DDC panels, field devices, HVAC controls, BMS communication networks, integrations, programming, graphics, alarms, and system operation<br>Key Responsibilities: Supervise BMS installation activities at site, including 1st, 2nd & 3rd fix works. Review site works to ensure compliance with approved drawings, specifications, material submittals, method statements, and quality requirements. Perform testing and commissioning activities, including point-to-point testing, loop checking, functional testing, sequence verification, alarm testing, and system readiness checks. Support controller configuration, programming modifications, graphics configuration, alarm configurations, and testing-related software changes required for commissioning and handover. Troubleshoot issues related to BMS controllers, sensors, actuators, communication networks, graphics, alarms, trends, and system operation. Coordinate with engineering, construction, QA/QC, vendors, subcontractors, and client representatives to close site issues and complete commissioning activities. Prepare and maintain testing records, commissioning reports, punch lists, inspection requests, redline markups, and handover documentation. Support client inspections, demonstrations, training sessions, and final system acceptance. Ensure that all site activities are performed safely and in accordance with project requirements, permits, and applicable procedures.<br>Requirements: Bachelor's degree or diploma in Electrical, Electronics, Instrumentation, Mechanical, Controls, or a related engineering field. Hands-on experience in BMS installation, testing, commissioning, and site supervision. Good understanding of HVAC control systems, DDC controllers, field devices, control wiring, networking, and BMS graphics. Ability to read and understand wiring drawings, shop drawings, wiring diagrams, control schematics, IO lists, and sequence of operation documents. Experience with major BMS platforms and Tridium is preferred. Strong troubleshooting, coordination, reporting, and documentation skills. Ability to work independently at site and follow up with multiple stakeholders until issues are closed. Some degree of experience with BMS design (IO lists, BOMs, Schematic Flow Drawings, Network Risers, Shop Drawings etc.)<br>Extra Value for:Experience with DEOS is significant added value Experience with Niagara Experience with SCADA systems Experience with other LC systems, such as Access Control, Fire Alarm, Lighting Control etc. Experience with MCCs and MCC design Any additional trainings and certifications related to the field Previous experience in Saudi Aramco, healthcare, commercial, or industrial projects is an advantage.

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <b>Job Description</b>Overview<p>The Resident Engineer (O&amp;M) will be responsible for overseeing the operations and maintenance activities of metro rail systems, ensuring safe, efficient, and reliable functioning of all assets. The role involves managing contractors, supervising maintenance activities, ensuring compliance with safety and quality standards, and coordinating with stakeholders.</p><br>Your role<p><b>Operations Management</b></p><br><ul><li>Oversee day-to-day metro operations to ensure uninterrupted service.</li><li>Monitor system performance (trains, track, signaling, telecom, power supply, etc.).</li><li>Ensure adherence to operational schedules and service standards.</li><li>Analyze operational data and implement improvements to optimize performance.</li></ul><p><b>Maintenance Management</b></p><br><ul><li>Supervise preventive and corrective maintenance activities across civil, E&amp;M, and systems.</li><li>Ensure timely inspection, repair, and maintenance of metro infrastructure and rolling stock.</li><li>Review maintenance plans, schedules, and reports from contractors/vendors.</li><li>Ensure proper documentation and asset lifecycle management.</li></ul><p><b>Contractor &amp; Vendor Management</b></p><br><ul><li>Supervise O&amp;M contractors and service providers.</li><li>Review contractor performance against KPIs/SLAs.</li><li>Ensure compliance with contractual obligations, safety, and quality standards.</li><li>Conduct periodic meetings and audits.</li></ul><p><br><b>Safety &amp; Compliance</b></p><br><ul><li>Ensure compliance with railway/metro safety standards and statutory regulations.</li><li>Implement safety protocols and emergency response procedures.</li><li>Conduct safety audits, inspections, and incident investigations.</li><li>Promote a strong safety culture across teams.</li></ul><p><b>Quality Assurance</b></p><br><ul><li>Ensure maintenance activities meet quality and technical standards.</li><li>Conduct inspections and audits of systems and works.</li><li>Verify adherence to ISO/Quality Management Systems where applicable.</li></ul><p><b>Stakeholder Coordination</b></p><br><ul><li>Liaise with clients, government authorities, contractors, and internal teams.</li><li>Support audits and reporting requirements for regulatory bodies.</li><li>Coordinate with cross-functional teams for issue resolution.</li></ul><p><b>Documentation &amp; Reporting</b></p><br><ul><li>Maintain detailed records of maintenance, incidents, inspections, and performance.</li><li>Prepare daily/weekly/monthly O&amp;M reports.</li><li>Track KPIs and recommend improvements.</li></ul>About you<p><b><span>Education</span></b></p><br><ul><li><span>Bachelor’s Degree in Engineering (Electrical / Mechanical / Civil / Electronics / Railway Engineering).</span></li><li><span>Master’s degree is an added advantage.</span></li></ul><p><b><span>Experience</span></b></p><br><ul><li><span>15+ years of experience in transport, metro/railway projects.</span></li><li><span>Minimum 5+ years in Operations &amp; Maintenance of metro/rail systems.</span></li><li><span>Experience working as Resident Engineer / O&amp;M Lead / Maintenance Manager preferred.</span></li></ul><p><b><span>Technical Skills</span></b></p><br><ul><li><span>Strong knowledge of: </span><ul><li><span>Metro systems (track, rolling stock, signaling, telecom, traction power)</span></li><li><span>Maintenance strategies (preventive, predictive, corrective)</span></li><li><span>Asset management systems</span></li></ul></li><li><span>Familiarity with international standards (IEC, EN, railway safety standards).</span></li><li><span>Experience with CMMS/maintenance software tools.</span></li></ul><p><b><span>Behavioural Competencies</span></b></p><br><ul><li><span>Strong leadership and team management skills.</span></li><li><span>Excellent problem-solving and decision-making ability.</span></li><li><span>Effective communication and stakeholder management.</span></li><li><span>Ability to work in a high-pressure operational environment.</span></li></ul><p><b><span>Key Performance Indicators (KPIs)</span></b></p><br><ul><li><span>System availability and reliability</span></li><li><span>Maintenance turnaround time</span></li><li><span>Safety compliance and incident reduction</span></li><li><span>Contractor performance</span></li><li><span>Service punctuality and efficiency</span></li></ul><span>Rewards &amp; benefits</span><p><span>Explore the rewards and benefits that help you thrive – at every stage of your life and your career.</span></p><br><p><span>This includes:</span></p><br><ul><li>Tax-free salary.</li><li>Life insurance coverage.</li><li>Medical insurance.</li><li>Annual leave balance.</li><li>Company gratuity scheme.</li><li>Discretionary bonus program.</li><li>Annual flight contribution.</li><li>Transportation &amp; housing allowances.</li><li>Employee Wellbeing Program: 24/7 access to specialists in finance, legal matters, family care, personal health, fitness, and nutrition.</li></ul><p><span>Seize every opportunity to sharpen your skills, expand your expertise, and be recognized for the impact you make.</span></p><br><p><span>About AtkinsRéalis</span></p><br><p><span>We're AtkinsRéalis, a world-class engineering services and nuclear organization. We connect people, data and technology to transform the world's infrastructure and energy systems. Together, with our industry partners and clients, and our global team of consultants, designers, engineers and project managers, we can change the world. We're committed to leading our clients across our various end markets to engineer a better future for our planet and its people. </span></p><br><p><span>Find out more.</span></p><br><b>Worker Type</b>Employee<b>Job Type</b>Regular<p><span><i>At </i></span> <i><span>AtkinsRéalis</span></i><span><i>, we seek to hire individuals with diverse characteristics, backgrounds and perspectives. We strongly believe that world-class talent makes no distinctions based on gender, ethnic or national origin, sexual identity and orientation, age, religion or disability, but enriches itself through these differences. &nbsp;</i></span></p><br> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> No experience required </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

Senior Testing & Commissioning Manager – PV Inverter Specialist Location: Riyadh, Saudi Arabia (Family status available) <br>About the Role We are seeking a Senior Testing & Commissioning Manager to lead inverter commissioning activities across utility-scale solar PV projects. You will serve as the technical authority for inverter systems, ensuring safe energization, grid-code compliance, reliable operation, and seamless integration with PPC, SCADA, and grid infrastructure. This is a high-impact role spanning engineering review, commissioning, troubleshooting, grid compliance testing, and operational handover.<br>Key Responsibilities Review inverter system designs, SLDs, protection philosophies, and communication architectures Lead inverter pre-energization, synchronization, and power ramp-up activities Coordinate commissioning with PPC, SCADA, protection, and utility teams Conduct LVRT/HVRT, power factor, reactive capability, and power quality testing Diagnose inverter derating, nuisance trips, communication failures, and grid-related issues Perform root cause analysis using logs, oscillography, and trend data Prepare commissioning reports and support O&M handover<br>About You12+ years of utility-scale solar PV commissioning experience Expert knowledge of central and string inverter technologies Strong understanding of power electronics and inverter control strategies Experience with grid-code compliance and utility acceptance testing OEM commissioning experience preferred<br>Qualifications Bachelor's Degree in Electrical or Power Engineering<br>Why Apply? Lead commissioning of some of the world's largest solar PV projects Become the technical authority on inverter technologies and grid integration Work at the forefront of renewable energy innovation

Senior Testing & Commissioning Manager – PV Inverter Specialist Location: Riyadh, Saudi Arabia (Family status available) <br>About the Role We are seeking a Senior Testing & Commissioning Manager to lead inverter commissioning activities across utility-scale solar PV projects. You will serve as the technical authority for inverter systems, ensuring safe energization, grid-code compliance, reliable operation, and seamless integration with PPC, SCADA, and grid infrastructure. This is a high-impact role spanning engineering review, commissioning, troubleshooting, grid compliance testing, and operational handover.<br>Key Responsibilities Review inverter system designs, SLDs, protection philosophies, and communication architectures Lead inverter pre-energization, synchronization, and power ramp-up activities Coordinate commissioning with PPC, SCADA, protection, and utility teams Conduct LVRT/HVRT, power factor, reactive capability, and power quality testing Diagnose inverter derating, nuisance trips, communication failures, and grid-related issues Perform root cause analysis using logs, oscillography, and trend data Prepare commissioning reports and support O&M handover<br>About You12+ years of utility-scale solar PV commissioning experience Expert knowledge of central and string inverter technologies Strong understanding of power electronics and inverter control strategies Experience with grid-code compliance and utility acceptance testing OEM commissioning experience preferred<br>Qualifications Bachelor's Degree in Electrical or Power Engineering<br>Why Apply? Lead commissioning of some of the world's largest solar PV projects Become the technical authority on inverter technologies and grid integration Work at the forefront of renewable energy innovation

Senior Testing & Commissioning Manager – STATCOM Specialist Location: Riyadh, Saudi Arabia (Family Status available)<br>About the Role We are looking for a STATCOM Specialist to lead the commissioning and grid integration of STATCOM systems supporting renewable energy plants and substations.<br>You will ensure dynamic voltage support systems operate reliably under complex grid conditions while meeting utility acceptance criteria, power quality standards, and grid stability requirements.<br>Key Responsibilities Review STATCOM system designs, control philosophies, protection settings, and cooling systems Participate in FAT and control validation activities Lead pre-commissioning and energization of converter systems and auxiliary equipment Validate voltage control, reactive power control, and power factor operating modes Conduct dynamic reactive response, voltage recovery, and harmonic performance testing Coordinate acceptance testing with utilities and grid operators Troubleshoot converter trips, control instability, cooling failures, and communication issues Prepare commissioning reports and support O&M handover<br>About You12+ years of commissioning experience with STATCOM or FACTS devices Deep understanding of power electronics and reactive power compensation Experience with dynamic grid testing and power quality studies Strong troubleshooting and analytical skills OEM commissioning experience highly desirable<br>Qualifications Bachelor's Degree in Electrical or Power Engineering<br>Why Apply? Become a specialist in one of the fastest-growing areas of grid modernization Work on complex renewable energy and transmission projects Influence grid stability and power quality at utility scale

We have an exciting opportunity for a "Engineer 1 - Electrical Engineering " with our client in Saudi Arabia . Interested candidates are encouraged to send their CV to navika.srivastava@lancesoft.com<br>**Job Title:** Engineer 1 - Electrical Engineering**Location:** King Abdullah bin Abdul Aziz Science Park (KASP), Saudi Technology & Innovation Center, Dhahran Techno Valley, Dhahran 04 31261, Saudi Arabia**Contract Duration:** 12 Months<br>Description:Role Summary:- Will be responsible for providing expert technical input and organizational input to electrical engineering activities on a wide range of projects from studies and design to troubleshooting, commissioning, and decommissioning<br>Essential Responsibilities:-<br>* Primarily responsibility is to create electrical control cabinet design with all necessary documentation according to industry and customer requirements.* Use Micro Station CAD, Autodesk Inventor software to create, revise, review Project Drawings (System Interconnect, Power wiring, Layout drawings, Loop drawings, blocks, etc.)* Compliance to customer specifications for Hardware / Cabinets* Knowledge of industry codes and standards (IEEE, ANSI, NEC, IEC, NFPA).* Assist Project Engineer in customer witness testing of Hardware / Cabinet design functionality.* Follow quality procedures and standard design processes.* Develop detailed bills of material for panels.* Specify parts and develop ordering drawings. Update PE with job completion estimates and status* Provide performance based and economic evaluations, selection, application, troubleshooting and maintenance practices of protection devices.* Incorporate new design techniques to increase efficiency of Cabinet Engineering.* Responsible for executing defect-free designs in a timely manner.* Demonstrated ability to work in a global team environment,* Understanding of the electrical engineering concepts deemed necessary for designing the electrical cabinet* Understanding of NEMA/IP classifications<br>Essential Requirements of the role (Experience / Skills / Competencies):-•Years of experience: 3+ years•Field of experience: 3+ years field / projects / maintenance experience (working with instrumentation, control systems) in energy and/or oil & gas environment or relevant field will be an added advantage.•Technical Skills: ? Refer attached Desired & Essential Functions (Responsibilities):•Soft Skills: Good written and spoken communication skills in English, with demonstrated capability to structure and write technical material.•Tools or Software (Required / Preferred): Proven experience with document layout, formatting, and editing.•Education Qualifications: Bachelors or Diploma in Instrumentation / Electronics / Electrical or equivalent and up to 5+yrs experience.•Industry Background or Experience (Required / Preferred): Knowledge of rotating machinery operation and controls systems.•Target Companies: ? Any•Off-limits Companies: ? Not clear .•Required Accreditations / Qualifications / Certification / Licenses including Driving License: Ability and willingness to travel for site survey •Self-starter with minimal supervision requirement; able to work independently; ability to prioritize, organize work and meet deadlines<br>Desirable attributes of the worker (Experience / Skills / Competencies):-* Strong preference for individuals experienced in design of Bently Nevada machinery protection cabinet and control products.* Knowledge of Cabinet design engineering,* Knowledge of Bently Nevada machinery protection and management systems products and services.* 3+ years field / projects / maintenance experience (working with instrumentation, control systems) in energy and/or oil & gas environment or relevant field will be an added advantage.* Understanding of ISO 9001 design control standards* Prior experience with utility protection and control design standards* Knowledge of LV control circuit, fuse and circuit breaker coordination* Prior experience following quality assurance processes while working in a projects schedule-driven environment<br>Interested candidates should send their CV along with the following details:Expected salary Visa/Work Permit status Notice Period Current Location

Are you a skilled Embedded Hardware / Software Engineer with expertise in PCB design, microcontrollers, and embedded systems? If yes, then you are the one we are looking for!<br>The ideal candidate will have a strong background in circuit design, hardware integration, and embedded technologies for applications such as robotics, defense systems, ARHMD, and GNSS based GPS solutions. Candidates living outside Saudi Arabia may also apply. <br>Key Responsibilities:<br>Design, develop electronic and embedded hardware systems, ensuring robust and scalable solutions. Select and integrate microcontrollers (ARM7, STM32F745) and electronic components. Develop hardware architectures for Enhanced Situational Awareness Systems (ESAS), Augmented Reality Head Mounted Displays (ARHMD), and GNSS based heading systems. Conduct circuit simulations and testing using SPICE and other analysis tools. Design and implement power-efficient and thermally optimized embedded hardware solutions. Work with communication interfaces such as UART, SPI, I2C, CAN, TCP, UDP, RS232, USB, and Ethernet. Collaborate with embedded software engineers for seamless hardware software integration. Troubleshoot hardware failures and optimize performance using oscilloscopes, multimeters, and logic analyzers. Optimize designs for manufacturability, reliability, and compliance with industry standards. Contribute to the development of robotics, IGLA & ZU gun systems, and thermal imaging sight outputs. Design and integrate power electronic circuits, including AC-DC converters and motor drivers, ensuring efficient power management.<br><br>Required Qualification / Experience / Skills:<br>Bachelor’s degree in Engineering (B. E.) or Technology (B. Tech.) in Electronics or Electrical or Communication Engineering. Minimum 5 years experience in PCB design including schematics, layout, tolerances, and Gerber file generation (KiCad or similar tools preferred). Experience in defense, aerospace, or automotive industries are preferred, but not a must. Hands on experience with GNSS based positioning systems and kinematics-based GPS. Strong understanding of thermal imaging (TI) sight outputs and sensor integrations. Knowledge of augmented reality (AR) hardware systems. Technical Skills:PCB Design Tools: Altium, KiCad, OrCAD, Eagle. Experience with microcontrollers (e.g., ARM, PIC, AVR) and embedded software development. Microcontrollers & Processors: ARM7, STM32F745. Embedded Communication Interfaces: UART, SPI, I2C, CAN, RS232, USB, Ethernet. Testing & Debugging Tools: Oscilloscope, Logic Analyzer, Mustimeter, JTAG. Simulation & Circuit Analysis: SPICE, MATLAB, LTspice. Hardware Development Platforms: FPGA, DSP, SoCs. Operating Environments: Linux, Windows, VxWorks. Networking Protocols: TCP, UDP. Programming skills in languages like C, C++, and Python for developing and integrating firmware. Knowledge of standard communication protocols (e.g., SPI, I2C, UART, CAN) for seamless data exchange between subsystems.<br><br>What you can expect from the employer<br>Work on cutting-edge embedded technologies. Collaborate with an innovative and experienced team. Opportunity to contribute to advanced defense and robotics systems.<br>More Information<br>Salary Offer SAR 10,175 (inclusive of SAR 675 against food allowance) Accommodation & Transportation Location: Saudi Arabia, Abqaiq

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Date Posted:</b></p><br><br>2026-07-10&amp;#xa;&amp;#xa;<p><b>Country:</b></p><br><br>United States of America&amp;#xa;&amp;#xa;<p><b>Location:</b></p><br><br>US-AL-HUNTSVILLE-315 ~ 315 Bob Heath Dr ~ BOB HEATH&amp;#xa;&amp;#xa;<p><b>Position Role Type:</b></p><br><br>Onsite&amp;#xa;&amp;#xa;<p><b><span>U.S. Citizen, U.S. Person, or Immigration Status Requirements:</span> </b></p><br><br>The ability to obtain and maintain a U.S. government issued security clearance is required.​ U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance&amp;#xa;&amp;#xa;<p><b>Security Clearance Type: </b></p><br><br>DoD Clearance: Secret&amp;#xa;&amp;#xa;<p><b>Security Clearance Status: </b></p><br><br>Active and existing security clearance required after day 1<br><br><p><span>At <b>Raytheon</b>, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world. </span></p><br><br><br><p>The <b>Effector Guidance Electronics (EGE)</b> department develops electronics for weapon system products. We engage at the outset of the weapon system development and follow our designs through deployment. Our products are deployed all over the world, from the ground to exoatmospheric environments and into space. We are responsible for the architecture, design, and documentation of deliverable FPGA embedded processing at Raytheon. </p><br><br><br><p>This position is an onsite role, located in <b>Huntsville, AL</b>.</p><br><br><br><p><b><u>What You Will Do:</u></b></p><br><br><ul><li>Responsible for Printed Circuit Board (PCB) designs from conception to manufacturing</li><li>Creation of the PCB, Circuit Card Assembly (CCA), and Schematic drawings for suppliers</li><li>Schematic Capture, Component Placement, Routing of Traces, Gerber/ODB++ file creation</li><li>Utilizing software such as Siemens: Xpedition Enterprise and DownStream Technologies: BluePrint-PCB</li><li>Design layouts include Rigid, Flex, and Rigid-Flex assemblies</li><li>Work designs include full designs, re-spins, drawing updates, change notices, copper changes, and process improvement projects within and outside own discipline</li><li>Daily interface with various engineering levels along with different engineering disciplines including, but not limited to Electrical, Mechanical, Components, Test, and Producibility Engineering disciplines to ensure that the overall design requirements are captured, keeping cost, cycle time, and producibility in mind</li></ul><br><p><b><u>Qualifications You Must Have:</u></b></p><br><br><ul><li>Bachelor’s degree in Electrical Engineering or related Science, Technology, Engineering, or Mathematics (STEM) major.</li><li>The ability to obtain and&nbsp;maintain&nbsp;a U.S. government issued security clearance is&nbsp;required.&nbsp;</li><li>U.S. citizenship is&nbsp;required, as only U.S. citizens are eligible for a security clearance.&nbsp;</li><li>Experience with the electrical design process.<br>&nbsp;</li></ul><p><u><b>Qualifications We Prefer:</b></u></p><br><br><ul><li>Working knowledge of Analog and Digital design layout.</li><li>Some experience with board layout design tools.</li><li>Use of Valor NPI, Design for Manufacturing rule sets, other Design Rule Checking software</li><li>Able to understand and interpret drawings as they relate to PCB’s and CCA’s</li></ul><br><p><b><u>What We Offer</u></b><u>&nbsp;:</u></p><br><br><ul><li><p>Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Trust, Respect, Accountability, Collaboration, and Innovation.&nbsp;</p><br><br></li></ul><br><p><b>Learn More &amp; Apply Now!</b></p><br><br><br><p>​Please consider the following role type definition as you apply for this role.</p><br><br><ul><li><p><b><u>Onsite:</u></b> Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.</p><br><br></li></ul><br><p><i>Please upload a copy of your most recent transcripts with your resume when applying to this requisition. Include your cumulative GPA and projected graduation date on your resume.</i></p><br><br><br><p>This position requires a security clearance. <b>DCSA Consolidated Adjudication Services (DCSA CAS)</b>, an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here: https://www.state.gov/m/ds/clearances/c10978.htm&nbsp;</p><br><br><br><p>Huntsville, Alabama, earned the nickname "ROCKET CITY" for its close association with U.S. space research since 1950. RTX has been here since the early years, having launched its Huntsville operations as the Raytheon Company in 1948. Some of the brightest minds in aerospace and defense call it home. Can you see yourself here?&nbsp;</p><br><br><br><p>Huntsville, AL: https://careers.rtx.com/global/en/raytheon-huntsville,-al-location</p><br><br><br><br><p><i><b>As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend&nbsp;select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.</b></i></p><br><br><br>The salary range for this role is 57,200 USD - 108,800 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills.<br><br><br>Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.<br><br>Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance.<br><br>This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply.<br><br>RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.<br><br><p><span><i>RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.</i> </span></p><br><br><br><br><p><b>Privacy Policy and Terms:</b></p><br><br><p><span>Click on this </span>link<span> to read the Policy and Terms</span></p><br><br><br> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> No experience required </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Date Posted:</b></p><br><br>2026-06-29&amp;#xa;&amp;#xa;<p><b>Country:</b></p><br><br>United States of America&amp;#xa;&amp;#xa;<p><b>Location:</b></p><br><br>US-AL-HUNTSVILLE-315 ~ 315 Bob Heath Dr ~ BOB HEATH&amp;#xa;&amp;#xa;<p><b>Position Role Type:</b></p><br><br>Onsite&amp;#xa;&amp;#xa;<p><b><span>U.S. Citizen, U.S. Person, or Immigration Status Requirements:</span> </b></p><br><br>The ability to obtain and maintain a U.S. government issued security clearance is required.​ U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance&amp;#xa;&amp;#xa;<p><b>Security Clearance Type: </b></p><br><br>DoD Clearance: Secret&amp;#xa;&amp;#xa;<p><b>Security Clearance Status: </b></p><br><br>Active and existing security clearance required after day 1<br><br><br><p>At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world.</p><br><br><p>&nbsp;<br>We are seeking a professional Senior Power Engineer to assume a key role within the System Power,&nbsp;Analog&nbsp;and Controls Department.&nbsp;<br>&nbsp;<br>Do you enjoy power converter design?&nbsp;<br>Do early-career engineers come to you for technical guidance?&nbsp;<br>Do you have&nbsp;a strong desire&nbsp;to work on projects that are critical to the defense of our nation?&nbsp;<br> <br>If your answers are yes, we are looking for you to join our team!</p><br><br><p>&nbsp;<br><b> <u>What You Will Do</u></b></p><br><br><ul><li><p>Design, analyze (including thermal considerations), simulate, and test power conversion circuitry potentially&nbsp;utilizing&nbsp;any standard non-isolated power conversion topologies (buck, boost, buck-boost)&nbsp;including modules and discrete designs. </p><br><br></li></ul><ul><li><p>Guide Electronic Computer-Aided Design (ECAD) personnel through PWB layout of power circuitry and technical drawing creation.&nbsp;</p><br><br></li></ul><ul><li><p>Perform design work within the bounds of a given schedule.&nbsp;</p><br><br></li></ul><ul><li><p>Present reviews of technical data to program leadership and technical staff.&nbsp;</p><br><br></li></ul><p> <br><b><u>Qualifications You Must Have</u></b></p><br><br><ul><li><p>Typically requires a degree in Science, Technology, Engineering or Mathematics (STEM) and a minimum of 8 years of prior relevant experience</p><br><br></li></ul><ul><li><p>Minimum of 8 years of professional experience in design, analysis, simulation, and/or&nbsp;test experience with linear converters.&nbsp;</p><br><br></li></ul><ul><li><p>Experience&nbsp;with&nbsp;any of the following non-isolated converter topologies: <b>buck, boost,&nbsp;buck-boost. </b>&nbsp;</p><br><br></li></ul><ul><li><p>Experience with&nbsp;design, analysis, and test with analog electronic design and analysis, including FET, BJT, and/or&nbsp;Op-amp circuits.&nbsp;</p><br><br></li></ul><br><br><p><b><u>Qualifications We Prefer</u>&nbsp;</b></p><br><br><ul><li><p>Lab experience specific to power electronics and/or controls electronics&nbsp;</p><br><br></li></ul><ul><li><p>Demonstrated use of software tools for electrical circuit simulation and/or printed circuit board layout </p><br><br></li></ul><ul><li><p>Demonstrated ability to document designs and circuit performance verification&nbsp;</p><br><br></li></ul><ul><li><p>Demonstrated experience with&nbsp;fundamental power conversion concepts, components, and techniques&nbsp;</p><br><br></li></ul><ul><li><p>Demonstrated understanding of linear controls and motor drive techniques.&nbsp;</p><br><br></li></ul><ul><li><p>Basic understanding of commonly used power converter and/or motor drive control schemes&nbsp;</p><br><br></li></ul><ul><li><p>Design, analysis, and/or test experience with any of the following isolated converter topologies: flyback, half-bridge, full-bridge, and/or push-pull. Design scope will ideally include stability.&nbsp;</p><br><br></li></ul><ul><li><p>Experience with performing circuit card assembly-level power architecture trades, and/or with system-level power architecture trades, including power converter specification development experience.&nbsp;</p><br><br></li></ul><ul><li><p>Professional experience guiding Electronic Computer-Aided Design (ECAD) personnel through PWB layout of power circuitry and technical drawing creation (direct experience with such tools is adequate to fulfill this requirement).&nbsp;</p><br><br></li></ul><ul><li><p>Familiarity with circuit simulator SIMPLIS, Saber&nbsp;and/or analysis tool Mathcad.&nbsp;</p><br><br></li></ul><ul><li><p>Experience with Mentor Graphics&nbsp;DxDesigner, and/or&nbsp;Hyperlynx.&nbsp;</p><br><br></li></ul><ul><li><p>Experience with acting as a liaison between program and functional management.&nbsp;</p><br><br></li></ul><ul><li><p>Experience with digital power control.&nbsp;</p><br><br></li></ul><ul><li><p>Experience with military specifications.&nbsp;</p><br><br></li></ul><ul><li><p>Experience with transformer and inductor design considerations.&nbsp;</p><br><br></li></ul><ul><li><p>Design experience with Electro-Magnetic Interference (EMI) concerns.&nbsp;</p><br><br></li></ul><ul><li><p>Design experience with voltages &gt; 400V and/or power &gt; 10kW.&nbsp;</p><br><br></li></ul><ul><li><p>Experience with program management tools such as Earned Value.&nbsp;</p><br><br></li></ul><ul><li><p>Experience with proposal development.&nbsp;</p><br><br></li></ul><ul><li><p>Ability to design to meet concerns of adjacent disciplines, such as thermal, structural, mechanical, reliability, and quality.&nbsp;</p><br><br></li></ul><ul><li><p>Ability to be a self-starter and be able to function in a dynamic environment.&nbsp;</p><br><br></li></ul><ul><li><p>Strong interpersonal, leadership, communication, and time management skills.&nbsp;</p><br><br></li></ul><br><p><br><b><u>What We Offer</u></b><br>Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation.</p><br><br><br><p>This position is 100% onsite in Huntsville, AL and is eligible for relocation assistance.</p><br><br><br><p><b>Huntsville</b>, Alabama, earned the nickname "ROCKET CITY" for its close association with U.S. space research since 1950. RTX has been here since the early years, having launched its Huntsville operations as the Raytheon Company in 1948. Some of the brightest minds in aerospace and defense call it home. Can you see yourself here?</p><br><br><br><p>Huntsville Location information: https://www.huntsville.org/</p><br><br><br><br><br><p><i><b>As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend&nbsp;select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.</b></i></p><br><br><br>The salary range for this role is 107,500 USD - 204,500 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills.<br><br><br>Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.<br><br>Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance.<br><br>This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply.<br><br>RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.<br><br><p><span><i>RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.</i> </span></p><br><br><br><br><p><b>Privacy Policy and Terms:</b></p><br><br><p><span>Click on this </span>link<span> to read the Policy and Terms</span></p><br><br><br> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> No experience required </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><strong>Leverage your expertise and join the dynamic team of a leading Saudi contractor focused on high-quality large-scale residential projects in Saudi Arabia.</strong></p><br><p>The <span><strong>Low Current Engineer</strong></span> will be responsible for overseeing and coordinating all low current systems activities on site, ensuring installation, testing, and commissioning works are executed in compliance with project specifications, approved drawings, quality standards, and project requirements while supporting successful project delivery within schedule and budget.</p><br><strong>Key Accountabilities</strong><p><strong>The position involves:</strong></p><br><ul><li>Supervise and monitor all low current systems works on site to ensure compliance with approved drawings, specifications, and project standards.</li><li>Coordinate installation activities for low current systems including CCTV, Access Control, Fire Alarm, Public Address (PA), Structured Cabling, IPTV, SMATV, BMS, GRMS, and Data Networks.</li><li>Review shop drawings, technical submittals, method statements, and material approvals related to low current systems.</li><li>Ensure all materials delivered to site comply with approved specifications and project requirements.</li><li>Coordinate with MEP, civil, architectural, and IT teams to ensure proper integration of low current systems.</li><li>Monitor subcontractors and site teams to ensure works are executed as per schedule and quality standards.</li><li>Support testing, commissioning, troubleshooting, and system integration activities for all low current systems.</li><li>Identify technical issues, site clashes, delays, and coordination problems and provide corrective actions.</li><li>Prepare daily, weekly, and monthly progress reports related to low current works.</li><li>Attend coordination meetings with consultants, clients, subcontractors, and project teams.</li><li>Ensure compliance with QA/QC procedures, HSE standards, and company policies.</li><li>Support project handover activities including inspections, snagging, documentation, and as-built drawings.</li><li>Maintain accurate records of inspections, testing results, RFIs, material approvals, and project documentation.</li></ul><strong>Knowledge, Skills, and Experience</strong><p><strong>We are Looking for: <br></strong></p><br><ul><li>Bachelor’s degree in <strong>Electrical Engineering, Electronics Engineering or related field.</strong></li><li>Minimum <strong>5–8 years of experience in low current systems projects.</strong></li><li>Proven experience in <strong>residential, hospitality, commercial, mixed-use, or high-rise projects.</strong></li><li>Strong knowledge of low current systems including <strong>CCTV, Access Control, Fire Alarm, PA, IPTV, SMATV, BMS, and Structured Cabling.</strong></li><li>Experience in<strong>testing, commissioning, troubleshooting, and system integration activities.</strong></li><li>Strong understanding of <strong>shop drawings, technical specifications, method statements, and coordination drawings.</strong></li><li>Experience coordinating with consultants, subcontractors, suppliers, and multidisciplinary teams.</li><li>Familiarity with international standards and codes related to low current systems.</li><li>Ability to manage multiple site activities and work under pressure.</li><li>Proficiency in AutoCAD, MS Office, and low current coordination tools.</li><li>Strong communication, reporting, technical, and problem-solving skills.</li></ul> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> No experience required </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

Job Summary We are seeking an experienced BMS Testing & Commissioning Engineer to manage the testing, commissioning, troubleshooting, and optimization of Building Management Systems (BMS) across commercial, industrial, data center, and oil & gas projects. The ideal candidate should possess strong expertise in HVAC controls, BMS platforms, EPMS integration, automation systems, and electrical commissioning while ensuring compliance with international standards and project specifications. Key Responsibilities Perform testing, commissioning, and troubleshooting of Building Management Systems (BMS). Commission HVAC equipment including AHUs, FCUs, Chillers, VRF/VRV systems, Pumps, VAVs, Cooling Towers, and Ventilation Systems. Conduct I/O point verification, loop checks, sensor calibration, actuator testing, and functional performance testing. Configure and commission DDC controllers, field devices, sensors, valves, and actuators. Develop and validate control logic, sequences of operation, and BMS graphics. Integrate BMS with Fire Alarm, Access Control, CCTV, EPMS, SCADA, and other ELV systems. Support EPMS integration and real-time monitoring of electrical systems. Diagnose communication issues involving BACnet, Modbus, TCP/IP, OPC, RS485, and other industrial protocols. Review engineering drawings including control schematics, P&IDs, network architecture, SLDs, and I/O schedules. Execute FAT, SAT, Pre-Commissioning, Functional Performance Testing (FPT), and system validation. Optimize system performance to improve operational efficiency and reduce energy consumption. Coordinate with consultants, contractors, MEP teams, vendors, and clients throughout project execution. Prepare commissioning reports, testing documentation, inspection records, and project handover packages. Ensure compliance with ASHRAE, IEC, NEC, NFPA, API, project QA/QC procedures, and HSE requirements. Required Qualifications Bachelor's Degree in Electrical Engineering or Electrical & Electronics Engineering.2 - 5 years of experience in BMS, Electrical Commissioning, Automation, or Industrial Projects. Experience in Data Centers, Oil & Gas, Industrial Plants, Commercial Buildings, or Critical Facilities. Strong understanding of HVAC systems and control strategies. Experience with Siemens, Honeywell, Schneider, or Distech BMS platforms. Hands-on experience with EPMS integration and electrical monitoring systems. Familiarity with LV/MV electrical systems and switchgear commissioning. Knowledge of international standards including IEC, NEC, NFPA, ASHRAE, and API. Technical Skills Building Management Systems (BMS) EPMS / Electrical Power Monitoring Systems HVAC Controls & Automation Siemens Desigo CC / ABTHoneywell BMSDistech Controllers PLC & SCADA Systems DDC Controllers Modbus BACnet TCP/IPOPCRS485EC-GFXHVAC Commissioning FAT / SATFunctional Performance Testing Loop Checking I/O Verification Sensor Calibration Electrical Testing & Commissioning Electrical QA/QCLV/MV Systems Switchgear & MCCAuto CADHMIWin CC SCADAPrimavera P6 (Basic) Preferred Industry Experience Data Centers Oil & Gas Petrochemical Industrial Manufacturing Power Plants Commercial Buildings Critical Infrastructure Key Competencies Testing & Commissioning Troubleshooting & Root Cause Analysis HVAC Controls BMS Integration Energy Optimization Technical Documentation Electrical QA/QCProject Coordination Communication & Stakeholder Management Problem Solving Safety & Quality Compliance

Position Summary The Lead Instrumentation & Control (I&C) Commissioning Engineer represents the Owner during the commissioning phase of a utility-scale Combined Cycle Gas Turbine (CCGT) Power Plant. The role is responsible for providing technical oversight of the EPC Contractor’s Instrumentation & Control commissioning activities, ensuring all work is executed safely, in accordance with the EPC Contract, Owner’s Technical Specifications (OTS), OEM recommendations, project procedures, and applicable international standards.<br>The position focuses on field instrumentation, package control systems, PLCs, Safety Instrumented Systems (SIS), Fire & Gas Systems (F&G), and associated interfaces. The role works closely with the Lead DCS Commissioning Engineer, who has primary responsibility for oversight of the Distributed Control System (DCS), including system architecture, software configuration, networking, and overall control system functionality.<br>The Lead I&C Commissioning Engineer provides technical leadership, identifies commissioning risks, monitors EPC performance, witnesses critical commissioning activities, and supports the successful achievement of project milestones through to Commercial Operation Date (COD).<br>Key Responsibilities Commissioning Oversight Provide technical oversight of the EPC Contractor’s Instrumentation & Control commissioning activities. Monitor commissioning progress to ensure compliance with approved procedures, project schedule, and contractual requirements. Verify commissioning activities are carried out in accordance with the Owner’s Technical Specifications (OTS), EPC Contract, OEM recommendations, and applicable international standards. Witness critical commissioning activities and provide technical recommendations for Owner acceptance. Identify technical risks and recommend mitigation measures to the Commissioning Manager. Monitor EPC Contractor performance and raise concerns regarding quality, safety, schedule, or technical compliance.<br>Engineering & Documentation Review Review and provide technical comments on the EPC Contractor’s:Commissioning Procedures Method Statements Commissioning Schedules Functional Test Procedures Loop Check Procedures Cause & Effect Test Procedures Startup Procedures SAT Documentation Turnover Packages Commissioning Reports Red-Line Drawings As-Built Documentation. Ensure all documentation complies with project requirements before commissioning activities commence.<br>Field Instrumentation Provide technical oversight of commissioning activities related to:Pressure Instruments Temperature Instruments Flow Instruments Level Instruments Analytical Instruments Smart Field Devices Control Valves Motor Operated Valves (MOVs) On-Off Valves Instrument Air Systems Sampling Systems Instrument Calibration Instrument Reinstatement Loop Checking Field Verification Ensure commissioning activities are completed in accordance with approved procedures and project specifications.<br>Package Control Systems Oversee commissioning of package-mounted PLC and local control systems, including but not limited to:Water Treatment Plant Fuel Gas System Air Compressors Fire Protection Systems HVAC Systems Chemical Dosing Systems Diesel Generator Controls Auxiliary Boilers (where applicable) Balance of Plant Packages Verify successful integration between package control systems and the plant DCS.<br>Functional Testing Witness and monitor:Loop Checks Functional Testing Interlock Testing Permissive Testing Cause & Effect Testing Sequence Testing Valve Stroke Testing Instrument Functional Testing Package Interface Testing Integrated System Testing Coordinate closely with the Lead DCS Commissioning Engineer during integrated testing activities.<br>Safety Instrumented Systems (SIS) & Fire & Gas (F&G) Provide technical oversight of:SIS Field Devices Fire & Gas Detection Devices Functional Testing Proof Testing Interface Testing Final Acceptance Testing Ensure compliance with Functional Safety requirements and project specifications.<br>Mechanical Completion & System Turnover Participate in Mechanical Completion inspections. Support Ready for Commissioning (RFC) verification. Participate in system walkdowns. Monitor I&C punch list close-out. Review turnover dossiers. Support System Completion (ECC/TOP) activities. Verify system readiness for Owner acceptance.<br>Startup & Performance Testing Monitor and witness EPC Contractor activities during:Cold Commissioning Hot Commissioning First Energization First Fire First Synchronization Load Rejection Tests Reliability Run Performance Testing Commercial Operation Readiness Provide technical recommendations to the Commissioning Manager regarding system readiness and acceptance.<br>Interface Management Coordinate closely with:Lead DCS Commissioning Engineer Lead Electrical Commissioning Engineer Lead Mechanical Commissioning Engineer Construction Team Engineering Team Quality Team HSE Team Planning & Controls Manager System Completion (ECC/TOP) Team EPC Contractor OEM Representatives Owner’s Engineer LOTO Coordinator. Ensure effective coordination across all commissioning disciplines.<br>Reporting Monitor commissioning progress against the approved schedule. Identify technical issues affecting commissioning progress. Report commissioning risks and recommend mitigation measures. Review of EPC commissioning reports. Prepare Owner observations and recommendations. Support weekly and monthly commissioning progress reporting.<br>Health, Safety & Quality Promote a Zero Harm safety culture. Ensure compliance with project HSE requirements. Verify commissioning activities are conducted under approved Permit-to-Work (PTW) and Lock Out/Tag Out (LOTO) procedures. Ensure compliance with project Quality Management requirements. Promote safe commissioning practices throughout all project phases.<br>Qualifications Bachelor’s Degree in Instrumentation Engineering, Control Engineering, Electrical Engineering, Electronics Engineering, or an equivalent engineering discipline from a recognized university. Professional Engineer (PE), Chartered Engineer (CEng), or equivalent professional registration is desirable. Certification or formal training in Functional Safety (IEC 61511), ISA, or equivalent is considered an advantage. Excellent written and verbal communication skills in English.<br>Experience Minimum 12 years of direct Instrumentation & Control commissioning experience in utility-scale Combined Cycle Gas Turbine (CCGT) power plants. Minimum 5 years of experience as a Lead I&C Commissioning Engineer or in a comparable senior commissioning leadership role. Proven experience in commissioning at least two utility-scale Combined Cycle Power Plants, including one project with an installed capacity of 1,900 MW or greater. Demonstrated experience across the full commissioning lifecycle, including:Construction Support Mechanical Completion Pre-Commissioning Commissioning First Fire First Synchronization Reliability Run Performance Testing Commercial Operation (COD) Previous experience representing the Owner, Owner’s Engineer, or EPC Contractor on major power generation projects. Demonstrated experience in overseeing EPC Contractor commissioning activities and coordinating with OEMs and package vendors. Strong experience with System Completion processes, including Mechanical Completion, Ready for Commissioning (RFC), ECC/TOP, Turnover, and Handover.<br>Technical Competencies Demonstrated experience with:Field Instrumentation Instrument Calibration Loop Checking Smart Instruments Control Valves Motor Operated Valves (MOVs) Instrument Air Systems Package PLC Systems Safety Instrumented Systems (SIS) Fire & Gas Systems (F&G) Turbine Package Interfaces HRSG Instrumentation Balance of Plant Instrumentation Communication Protocols (Modbus, Profibus, Foundation Fieldbus, HART, Ethernet/IP or equivalent) Functional Testing Cause & Effect Verification Interlock Testing System Integration Testing Commissioning Documentation System Turnover and Handover<br>Knowledge Sound knowledge of:Combined Cycle Power Plant systems and operation Commissioning management principles EPC Contract Execution Owner’s Technical Specifications (OTS) OEM commissioning requirements IEC Standards ISA Standards IEEE Standards (as applicable) Functional Safety (IEC 61511) Quality Management Systems (ISO 9001) HSE Management Systems Permit-to-Work (PTW) Lock Out/Tag Out (LOTO)<br>Key Competencies Technical Leadership Commissioning Management Planning and Organizing Analytical Thinking Problem Solving Decision Making Communication and Presentation Skills Stakeholder Management Teamwork and Collaboration Negotiation and Conflict Resolution Attention to Detail Safety Leadership Quality Focus Results Orientation<br>Key Performance Indicators (KPIs) Zero Lost Time Incidents (LTI) are attributable to I&C commissioning activities. I&C commissioning activities completed in accordance with the approved project schedule. Successful completion of all loop checks, functional tests, and integrated system tests. Timely closure of I&C punch list items. Successful completion of startup, synchronization, reliability run, and performance testing milestones. Timely completion of System Completion (ECC/TOP) and Owner handover activities. Effective oversight of EPC Contractor commissioning performance. Timely identification and mitigation of commissioning risks. High-quality commissioning documentation and turnover packages. Positive collaboration with internal stakeholders, EPC Contractor, OEMs, and Owner’s Engineer.

Position Summary The Lead Instrumentation & Control (I&C) Commissioning Engineer represents the Owner during the commissioning phase of a utility-scale Combined Cycle Gas Turbine (CCGT) Power Plant. The role is responsible for providing technical oversight of the EPC Contractor’s Instrumentation & Control commissioning activities, ensuring all work is executed safely, in accordance with the EPC Contract, Owner’s Technical Specifications (OTS), OEM recommendations, project procedures, and applicable international standards.<br>The position focuses on field instrumentation, package control systems, PLCs, Safety Instrumented Systems (SIS), Fire & Gas Systems (F&G), and associated interfaces. The role works closely with the Lead DCS Commissioning Engineer, who has primary responsibility for oversight of the Distributed Control System (DCS), including system architecture, software configuration, networking, and overall control system functionality.<br>The Lead I&C Commissioning Engineer provides technical leadership, identifies commissioning risks, monitors EPC performance, witnesses critical commissioning activities, and supports the successful achievement of project milestones through to Commercial Operation Date (COD).<br>Key Responsibilities Commissioning Oversight Provide technical oversight of the EPC Contractor’s Instrumentation & Control commissioning activities. Monitor commissioning progress to ensure compliance with approved procedures, project schedule, and contractual requirements. Verify commissioning activities are carried out in accordance with the Owner’s Technical Specifications (OTS), EPC Contract, OEM recommendations, and applicable international standards. Witness critical commissioning activities and provide technical recommendations for Owner acceptance. Identify technical risks and recommend mitigation measures to the Commissioning Manager. Monitor EPC Contractor performance and raise concerns regarding quality, safety, schedule, or technical compliance.<br>Engineering & Documentation Review Review and provide technical comments on the EPC Contractor’s:Commissioning Procedures Method Statements Commissioning Schedules Functional Test Procedures Loop Check Procedures Cause & Effect Test Procedures Startup Procedures SAT Documentation Turnover Packages Commissioning Reports Red-Line Drawings As-Built Documentation. Ensure all documentation complies with project requirements before commissioning activities commence.<br>Field Instrumentation Provide technical oversight of commissioning activities related to:Pressure Instruments Temperature Instruments Flow Instruments Level Instruments Analytical Instruments Smart Field Devices Control Valves Motor Operated Valves (MOVs) On-Off Valves Instrument Air Systems Sampling Systems Instrument Calibration Instrument Reinstatement Loop Checking Field Verification Ensure commissioning activities are completed in accordance with approved procedures and project specifications.<br>Package Control Systems Oversee commissioning of package-mounted PLC and local control systems, including but not limited to:Water Treatment Plant Fuel Gas System Air Compressors Fire Protection Systems HVAC Systems Chemical Dosing Systems Diesel Generator Controls Auxiliary Boilers (where applicable) Balance of Plant Packages Verify successful integration between package control systems and the plant DCS.<br>Functional Testing Witness and monitor:Loop Checks Functional Testing Interlock Testing Permissive Testing Cause & Effect Testing Sequence Testing Valve Stroke Testing Instrument Functional Testing Package Interface Testing Integrated System Testing Coordinate closely with the Lead DCS Commissioning Engineer during integrated testing activities.<br>Safety Instrumented Systems (SIS) & Fire & Gas (F&G) Provide technical oversight of:SIS Field Devices Fire & Gas Detection Devices Functional Testing Proof Testing Interface Testing Final Acceptance Testing Ensure compliance with Functional Safety requirements and project specifications.<br>Mechanical Completion & System Turnover Participate in Mechanical Completion inspections. Support Ready for Commissioning (RFC) verification. Participate in system walkdowns. Monitor I&C punch list close-out. Review turnover dossiers. Support System Completion (ECC/TOP) activities. Verify system readiness for Owner acceptance.<br>Startup & Performance Testing Monitor and witness EPC Contractor activities during:Cold Commissioning Hot Commissioning First Energization First Fire First Synchronization Load Rejection Tests Reliability Run Performance Testing Commercial Operation Readiness Provide technical recommendations to the Commissioning Manager regarding system readiness and acceptance.<br>Interface Management Coordinate closely with:Lead DCS Commissioning Engineer Lead Electrical Commissioning Engineer Lead Mechanical Commissioning Engineer Construction Team Engineering Team Quality Team HSE Team Planning & Controls Manager System Completion (ECC/TOP) Team EPC Contractor OEM Representatives Owner’s Engineer LOTO Coordinator. Ensure effective coordination across all commissioning disciplines.<br>Reporting Monitor commissioning progress against the approved schedule. Identify technical issues affecting commissioning progress. Report commissioning risks and recommend mitigation measures. Review of EPC commissioning reports. Prepare Owner observations and recommendations. Support weekly and monthly commissioning progress reporting.<br>Health, Safety & Quality Promote a Zero Harm safety culture. Ensure compliance with project HSE requirements. Verify commissioning activities are conducted under approved Permit-to-Work (PTW) and Lock Out/Tag Out (LOTO) procedures. Ensure compliance with project Quality Management requirements. Promote safe commissioning practices throughout all project phases.<br>Qualifications Bachelor’s Degree in Instrumentation Engineering, Control Engineering, Electrical Engineering, Electronics Engineering, or an equivalent engineering discipline from a recognized university. Professional Engineer (PE), Chartered Engineer (CEng), or equivalent professional registration is desirable. Certification or formal training in Functional Safety (IEC 61511), ISA, or equivalent is considered an advantage. Excellent written and verbal communication skills in English.<br>Experience Minimum 12 years of direct Instrumentation & Control commissioning experience in utility-scale Combined Cycle Gas Turbine (CCGT) power plants. Minimum 5 years of experience as a Lead I&C Commissioning Engineer or in a comparable senior commissioning leadership role. Proven experience in commissioning at least two utility-scale Combined Cycle Power Plants, including one project with an installed capacity of 1,900 MW or greater. Demonstrated experience across the full commissioning lifecycle, including:Construction Support Mechanical Completion Pre-Commissioning Commissioning First Fire First Synchronization Reliability Run Performance Testing Commercial Operation (COD) Previous experience representing the Owner, Owner’s Engineer, or EPC Contractor on major power generation projects. Demonstrated experience in overseeing EPC Contractor commissioning activities and coordinating with OEMs and package vendors. Strong experience with System Completion processes, including Mechanical Completion, Ready for Commissioning (RFC), ECC/TOP, Turnover, and Handover.<br>Technical Competencies Demonstrated experience with:Field Instrumentation Instrument Calibration Loop Checking Smart Instruments Control Valves Motor Operated Valves (MOVs) Instrument Air Systems Package PLC Systems Safety Instrumented Systems (SIS) Fire & Gas Systems (F&G) Turbine Package Interfaces HRSG Instrumentation Balance of Plant Instrumentation Communication Protocols (Modbus, Profibus, Foundation Fieldbus, HART, Ethernet/IP or equivalent) Functional Testing Cause & Effect Verification Interlock Testing System Integration Testing Commissioning Documentation System Turnover and Handover<br>Knowledge Sound knowledge of:Combined Cycle Power Plant systems and operation Commissioning management principles EPC Contract Execution Owner’s Technical Specifications (OTS) OEM commissioning requirements IEC Standards ISA Standards IEEE Standards (as applicable) Functional Safety (IEC 61511) Quality Management Systems (ISO 9001) HSE Management Systems Permit-to-Work (PTW) Lock Out/Tag Out (LOTO)<br>Key Competencies Technical Leadership Commissioning Management Planning and Organizing Analytical Thinking Problem Solving Decision Making Communication and Presentation Skills Stakeholder Management Teamwork and Collaboration Negotiation and Conflict Resolution Attention to Detail Safety Leadership Quality Focus Results Orientation<br>Key Performance Indicators (KPIs) Zero Lost Time Incidents (LTI) are attributable to I&C commissioning activities. I&C commissioning activities completed in accordance with the approved project schedule. Successful completion of all loop checks, functional tests, and integrated system tests. Timely closure of I&C punch list items. Successful completion of startup, synchronization, reliability run, and performance testing milestones. Timely completion of System Completion (ECC/TOP) and Owner handover activities. Effective oversight of EPC Contractor commissioning performance. Timely identification and mitigation of commissioning risks. High-quality commissioning documentation and turnover packages. Positive collaboration with internal stakeholders, EPC Contractor, OEMs, and Owner’s Engineer.

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Date Posted:</b></p><br><br>2026-07-09&amp;#xa;&amp;#xa;<p><b>Country:</b></p><br><br>United States of America&amp;#xa;&amp;#xa;<p><b>Location:</b></p><br><br>US-AL-HUNTSVILLE-315 ~ 315 Bob Heath Dr ~ BOB HEATH&amp;#xa;&amp;#xa;<p><b>Position Role Type:</b></p><br><br>Onsite&amp;#xa;&amp;#xa;<p><b><span>U.S. Citizen, U.S. Person, or Immigration Status Requirements:</span> </b></p><br><br>The ability to obtain and maintain a U.S. government issued security clearance is required.​ U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance&amp;#xa;&amp;#xa;<p><b>Security Clearance Type: </b></p><br><br>DoD Clearance: Secret&amp;#xa;&amp;#xa;<p><b>Security Clearance Status: </b></p><br><br>Active and existing security clearance required after day 1<br><br><p>At<b> Raytheon</b>, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world.&nbsp;</p><br><br><br><p>The <b>Effector Guidance Electronics (EGE)</b> department develops electronics for weapon system products. We engage at the outset of the weapon system development and follow our designs through deployment. Our products are deployed all over the world, from the ground to exoatmospheric environments and into space. We are looking for individuals to support the circuit card design process, turning designs into robust and reliable reality. Individuals will interface with multiple internal stakeholders and external suppliers to develop high quality producible designs. Team members will be exposed to all phases of the circuit card lifecycle from development through production and will present their findings through program design reviews.&nbsp;</p><br><br><p><b><u>What You Will Do:</u></b></p><br><br><ul><li>The Electrical Engineer I will support the following areas: Electrical Component Engineers ensuring cost effective and robust parts are used to ensure successful products, by selecting, specifying, and determining application adherence for electrical components.&nbsp;</li></ul><br><p>Individuals will interface with multiple internal stakeholders and external suppliers to develop:</p><br><br><ul><li>Electrical Component Engineers will evaluate risk and verification data packages that will support component selections and provide justification to program customers. </li><li>Electrical Component Engineers will identify parts to be included on the preferred parts list, drive usage of these standardized parts, provide recommendations to mitigate obsolescence issues, and identify solutions to meet customer component requirements.&nbsp;</li></ul><br><p><b><u>Qualifications You Must Have:</u></b></p><br><br><ul><li>Bachelor’s degree in Electrical Engineering or related Science, Technology, Engineering, or Mathematics (STEM) major.</li><li>The ability to obtain and&nbsp;maintain&nbsp;a U.S. government issued security clearance is&nbsp;required.&nbsp;</li><li>U.S. citizenship is&nbsp;required, as only U.S. citizens are eligible for a security clearance.&nbsp;</li></ul><br><p><i>Experience may be obtained through on‑the‑job experience, research, coursework, or projects.</i> </p><br><br><br><p><u><b>Qualifications We Prefer:</b></u></p><br><br><ul><li>Technical working knowledge of electronic components (e.g. semiconductor, passive and/or electromechanical commodities) and their application.</li><li>Board layout experience of single and multi-lamination boards.</li><li>PCB manufacturing and Circuit card assembly.</li><li>Strong written and verbal communication skills as well as the ability to effectively multi-task</li></ul><br><p><b><u>What We Offer</u></b><u>&nbsp;:</u></p><br><br><ul><li><p>Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Trust, Respect, Accountability, Collaboration, and Innovation.&nbsp;</p><br><br></li></ul><br><p><b>Learn More &amp; Apply Now!</b></p><br><br><br><p>​Please consider the following role type definition as you apply for this role.</p><br><br><ul><li><p><b><u>Onsite:</u></b> Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.</p><br><br></li></ul><br><p><i>Please upload a copy of your most recent transcripts with your resume when applying to this requisition. Include your cumulative GPA and projected graduation date on your resume.</i></p><br><br><br><p>This position requires a security clearance. <b>DCSA Consolidated Adjudication Services (DCSA CAS)</b>, an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here: https://www.state.gov/m/ds/clearances/c10978.htm&nbsp;</p><br><br><br><p>Huntsville, Alabama, earned the nickname "ROCKET CITY" for its close association with U.S. space research since 1950. RTX has been here since the early years, having launched its Huntsville operations as the Raytheon Company in 1948. Some of the brightest minds in aerospace and defense call it home. Can you see yourself here?&nbsp;</p><br><br><br><p>Huntsville, AL: https://careers.rtx.com/global/en/raytheon-huntsville,-al-location</p><br><br><br><br><p><i><b>As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend&nbsp;select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.</b></i></p><br><br><br>The salary range for this role is 57,200 USD - 108,800 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills.<br><br><br>Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.<br><br>Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance.<br><br>This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply.<br><br>RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.<br><br><p><span><i>RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.</i> </span></p><br><br><br><br><p><b>Privacy Policy and Terms:</b></p><br><br><p><span>Click on this </span>link<span> to read the Policy and Terms</span></p><br><br><br> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> No experience required </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Responsibilities: Lead quality risk assessment across the whole processes under their responsibility and ensures they are documented and updated regularly especially those related to new/change in process and new product introduction. Working with other stakeholders, identify and implement actions to minimize risks identified through risk assessments such as codifying and leading the implementation of fit-for-purpose First Article (FA) protocol for specific component types. Schedule and the lead implementation of quality audits within their scope of operation. Lead assurance effort to ensure ongoing compliance with applicable internal, customer and industry quality and regulatory requirements Lead the analysis of available data to identify key trends/causes of NCRs and Service Qualities, and the root cause(s) of those key causes. Perform analysis of run life performance of installed ESP systems to identify key trends and causes, at various organizational levels Lead the analysis of the yield, process variance and measurements done across overall manufacturing process, to identify key processes that require improvements. Provide input and recommendation on how to add/update/upgrade business systems to enable incorporating various data analysis as part of routine operation As Subject Matter Expert (SME), train the organization on applicable topics related to root cause analysis, statistical quality tool, reliability engineering and data analysis. Performs other duties as assigned.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Bachelor (or higher) degree in any Science/Engineering discipline.</li><li>Minimum 5 years working experience in similar role</li><li>Practical experience in using Minitab and/or Reliasoft suite-of-software (or equivalent)</li><li>Knowledge of ERP and GEARs systems</li><li>Basic knowledge in development and use of Machine Learning and Artificial Intelligence</li><li>Knowledge of ISO 9001/API Q1 is mandatory</li><li>Preferred experience in Oil &amp; Gas, Aerospace, Automotive or Electronics manufacturing industry</li><li>Excellent English written and verbal communication skills.</li></ul><p></p></section>

We are looking for a talented, motivated Network and Security Sr Engineer (Medina Airport). The ideal candidate is a master of their skill set but has the flexibility and openness to learn new things and adapt to changes. Description:Senior Associate who will be responsible with the below job duties include support for Perimeter Services (Firewalls, Proxies, and IDS), DDI, SDWAN, and Web Application Protection with a focus on Perimeter Services:Lead in the maintenance and configuration of next generation firewall infrastructure. Recommend, implement, and deliver technology solutions based on analysis and business requirements. Participate in planning, hardware resource availability and the development and or introduction of new applications and services. Create and maintain standards documentation for deployment, maintenance, monitoring, and daily operations. Participate in the design and development of services and tools focusing on automation and orchestration. Participating in device migrations and deployments. Working with the SME and Engineering functions to design and implement solutions. Participation in the resolution of critical major incident Participation in Technical training and mentoring other members of the global team. Participation in the response, resolution, and closure of DNS, DHCP, IP (DDI) requests for the territory, operating of DDI tooling, including DHCP reservations, DNS resource record management and IP address management. Troubleshooting DNS, DHCP network issues through resolution. Qualifications Certification(s) Preferred: CCNP, CISSP, Certified for NGFW Preferred Knowledge/Skills:Troubleshooting and resolution of complex network security incidents, to include packet capture and analysis, log review, and critical thinking. Building/deploying/configuring/managing firewalls in an enterprise level environment. Demonstrating experience in networking and firewalls. Possessing specialist level experience with NGFW administration as well as the design and implementation of industry leading practices. Solving complex technical problems through engineering, including requirements analysis, design, development, implementation, and testing. Demonstrating Security Risk Assessment for firewall configurations. Possessing knowledge of cloud NSG, Load Balancer, UDR configuration and troubleshooting. Understanding security technology operational industry standards. Contributing to a central technology service organization. Navigating a matrix organization and collaborating with multiple stakeholders across functional and technical skill sets. Requirements:Experience with the following:Troubleshooting: TCP/IP, Routing, Switching, Unified Communications Layer 2 Technologies: STP, v PC, SPAN, VxLANLayer 3 Technologies: QoS, MPLS, OSPF, BGPSecurity Technologies: IPsec,Next-Gen Firewall,Strong analytical and problem-solving skills - communicates in a clear and succinct manner and effectively evaluates information/data to make decisions; anticipates obstacles and develops plans to resolve; creates actionable strategies and operational plans. Demonstrating experience in Web Application Protection (WAP), networking and firewalls Education: A four-year formal university degree (engineering faculties related to electronics, computers, communication) Total work experience: +4 Years Foreign Language: English Level: Good: In getting the job done; at a sufficient level to explain and understand instructions,Discuss an issue, read, and write a report. Saudi National Only

At Indra Group, we protect what matters most. We lead the development of cutting-edge technology solutions that strengthen national and international security, safeguarding critical infrastructure through reliable fire detection and integrated security systems that protect people and operations worldwide.<br>Join our team! As a leading company in the defense and technology sector, we are looking to strengthen our team in Saudi Arabia with a Fire Detection & Security Systems Engineer with solid experience in fire alarm and integrated security systems to manage operation and maintenance activities, ensure system reliability, and support the integration of fire and security systems across critical infrastructure.<br>????What will you do? Perform operation and maintenance of Edwards EST3/EST4 fire alarm systems. Execute preventive and corrective maintenance activities based on defined schedules. Troubleshoot fire alarm loops, devices, and panel/system-level faults. Maintain and support CCTV (IP-based systems), Access Control (Lenel/ATS), and Intrusion Detection Systems. Monitor and investigate alarms from centralized systems. Ensure proper integration between fire and security systems. Support field teams (ML1) and coordinate with OEM/vendors (ML3). Maintain accurate documentation, logs, and technical reports.<br>????What are we looking for? ✅ Bachelor's Degree in Electrical, Electronics, or Mechatronics Engineering.✅ Minimum 5 years of experience in fire and security systems, with hands-on experience in Edwards EST3/EST4 (mandatory).✅ Experience with integrated security systems (CCTV, ACS, IDS) and control room environments.✅ Strong understanding of system integration and alarm management, with knowledge of TCP/IP networks, RS-485, and fiber systems.✅ Comfortable working in 24/7 critical operations environments, with strong troubleshooting and analytical skills.✅ Experience in railway, metro, or large infrastructure projects, and Edwards (EST), NFPA, or Lenel certifications, are a plus.<br>✨What we offer????✨: Stability and Future Long-term projects in a leading Defense company with more than 65,000 professionals, with financial security.???? International, High-Impact Projects: You will work in an international environment, with impact both nationally and globally.???? Close-Knit, Transparent Environment: You will enjoy direct, fluid communication with managers and colleagues, in a collaborative and open environment.⏳Autonomy and Responsibility: You will have the freedom to organize your work within a role of technical responsibility and growth.???? Career Plan Tailored to You: Designed to drive your professional growth and development.???? Competitive Compensation and flexible compensation plans tailored to your needs.<br>Our commitment is to promote work environments where people are treated with respect and dignity, fostering the professional development of our workforce and guaranteeing equal opportunities in selection, training, and promotion, while providing a work environment free from any discrimination based on gender, age, disability, sexual orientation, gender identity or expression, religion, ethnicity, marital status, or any other personal or social circumstance.<br><br>INDRA is a Top Employer 2026 certified company! Join a company recognized as one of the best employers in Spain, thanks to our comprehensive HR management and the conditions we offer our professionals.

Role Purpose:The Supplier Industrialization Quality Engineer is responsible for improving manufacturing efficiency, quality, and cost performance at supplier sites. This role works closely with suppliers to optimize processes, ensure capacity readiness, support new product introductions, and drive continuous improvement aligned with company standards.<br>Key Responsibilities:Evaluate new and existing supplier quality systems and process capability by applying TKEC Supplier assessment policy. Deploy supplier annual audit, product audits, VDA6.3 process audits, and ensure compliance with supplier quality manual requirements to meet quality, cost and delivery targets. Conduct manufacturing process audits, time studies, and line balancing at supplier facilities Identify bottlenecks, inefficiencies, and risks; implement corrective actions Support suppliers in achieving stable and capable processes (CP/CPK, cycle time, yield) Regularly review supplier performance and prepare supplier performance reports of supplier quality indicators such as Field Escapes PPM, Critical Parts Reliability, Problems Per Job, CAPA closure rate, etc. and take necessary actions to close gaps. Validate supplier capacity, layout, manpower, and equipment for new and existing products. Take ownership and lead cross functional team in supplier quality problems resolution process. Initiate and monitor supplier quality improvement programs. Review and approve process flow, work instructions, PFMEA, and control plans. Support ramp-up, volume increases, and localization projects. Support supplier readiness for new product Introduction and engineering changes. Participate and Execute APQP / PPAP activities/First Article Inspection requirements. Ensure industrialization milestones and deliverables as per Standard Product Development Process (SPDP) are met on time. Work closely with Supplier Quality, Purchasing, R&D, Manufacturing, and Logistics teams Provide technical guidance and training to suppliers when needed. Responsible for training and deployment of Manufacturing Process Control, Variation Reduction, Control Plan Development, Mistake Proofing, 6S, Lean Production and other TKE Company sponsored supplier initiatives. Follow all safety policies, procedures and work instructions according to the safety management system and fulfil his/her responsibilities as stated in the safety manual.<br>Qualifications & Skills:<br>Qualifications:Four-year college or university certificate: Engineering qualification preferable in Mechanical/Production/Automotive/Electrical required. At least 7 years’ experience in manufacturing or supplier engineering in manufacturing set in either Automobile/Industrial/Consumer/Electronics Manufacturing environment. (Elevator manufacturing Preferred). Familiarity with Supplier Quality Management Process. Experience working directly with suppliers for Industrialization and Quality Improvement. Project Management experience will be added advantage. Proficiency is common office Software tools (Excel, PPT, Outlook, etc.) Has Worked in SAP or any other related ERP systems.<br>Skills:Lean Manufacturing, Six Sigma, or similar methodology experience Knowledge of APQP, PPAP, PFMEA, and control plans Ability to perform time studies, line balancing, and capacity analysis Strong analytical, problem-solving, and communication skills. Knowledge of 8D and similar Quality Tools. Understands various manufacturing processes involved in production. Experience and ability to visualize customer complaints and their relation to various TKE operating processes. Quality Systems Certification (ISO9001 internal auditor), Lean Manufacturing, Manufacturing Process Control, Six Sigma, Geometric Dimensioning and Tolerancing.<br>Additional Requirements:Willingness to travel to supplier sites as required, at least 15 days in a month. Ability to work alone as the TKE voice and representative for Factory and the quality department.

Position Overview<br>The Commissioning Engineer is responsible for planning, coordinating, executing, and supervising all commissioning activities across the project lifecycle for ELV, security systems, electrical, mechanical, or multi-disciplinary packages. The role ensures that systems are tested, validated, and handed over in accordance with project specifications, client standards (Aramco/HCIS/EPC), and operational requirements.<br>Location: Project-based (KSA) – Candidate must be willing to travel and relocate as required⸻Key Responsibilities<br>1. Commissioning Planning & Strategy• Develop the overall commissioning plan, procedures, schedules, and resource requirements.• Define system boundaries, commissioning stages, and ITPs in alignment with project specifications.• Coordinate with engineering, procurement, construction, and QA/QC teams to ensure readiness.<br>2. Pre-Commissioning Activities• Review IFC drawings, shop drawings, vendor documentation, FAT reports, and method statements.• Verify installation completion through inspections, punch lists, and readiness checklists.• Ensure proper calibration, configuration, and connectivity of devices before functional testing.<br>3. System Commissioning & Testing• Lead implementation of commissioning tests such as functionality, integration, performance, and reliability tests.• Supervise commissioning technicians and subcontractors to ensure proper execution.• Conduct system integration testing for ELV/ICT/security systems (CCTV, ACS, IDS, PA, Structured Cabling, Network Systems).• Review and validate test results and logs and ensure compliance with standards.<br>4. Client Coordination & Approvals• Interface with client representatives (Aramco PMT, HCIS, EPC, Consultant) for inspections, approvals, and sign-offs.• Lead SAT (Site Acceptance Test) and demonstrate system functionalities.• Coordinate with stakeholders to close NCRs, punch points, and ensure system acceptance.<br>5. Documentation & Reporting• Prepare commissioning dossiers, test reports, checklists, red-line/as-built inputs, and turnover packages.• Maintain daily commissioning logs, progress trackers, and compliance reports.• Ensure documentation aligns with Aramco, HCIS, or project-specific templates and requirements.<br>6. Handover & Post-Commissioning Support• Achieve mechanical completion (MC), pre-commissioning, commissioning, and final acceptance milestones.• Support training for end-users and O&M teams.• Assist in system optimization, troubleshooting, and warranty-related activities post-handover.<br>Qualifications & Skills<br>Educational Requirements• Bachelor’s Degree in Electrical Engineering, Electronics/Communication Engineering, Instrumentation, or related discipline. Experience Requirements• 5-7 years of experience in commissioning activities for ELV, ICT, security systems, electrical, or industrial projects.• Experience with Aramco/HCIS/SABIC/NEOM projects is preferred.• Prior exposure to commissioning large-scale integrated security systems is an added advantage.<br>Technical Competencies• Strong knowledge of commissioning methodologies, testing tools, and system integration practices.• Expertise in ELV/security systems: CCTV, ACS, F&G, Radar/Perimeter Systems, Network/Switching, Structured Cabling, Servers, Storage, and BMS/SCADA interfaces.• Ability to read and interpret drawings, schematics, network layouts, ITPs, and method statements.• Familiarity with Aramco SAT, HCIS compliance requirements, and project commissioning standards.<br>Soft Skills• Strong leadership and team supervision capabilities.• Excellent communication with client, consultant, and internal teams.• Ability to manage high-pressure timelines and resolve technical issues proactively.• Detailed, disciplined, and methodical approach to testing and documentation.<br>Key Deliverables• Commissioning Plan & Schedule• Commissioning Test Procedures (CTPs)• Checklists & Test Sheets• Pre-Commissioning/Commissioning Reports• SAT Reports & Client Sign-Offs• As-Built/Redline Inputs• Final Handover Package

About Gulf Net Solutions (GNS) Founded in 1997, Gulf Net Solutions Company Limited (GNS) is a leading technology and engineering solutions provider headquartered in Dammam, Saudi Arabia. A wholly owned subsidiary of Ali Zaid Al Quraishi & Brothers (AZAQ), GNS delivers innovative solutions across automation, digital transformation, industrial communications, cybersecurity, and smart utility infrastructure throughout the GCC.<br>Job Summary We are seeking an experienced Senior Automation Engineer to support the execution, commissioning, and maintenance of automation systems for water utility projects across Saudi Arabia. The successful candidate will be responsible for site-based activities related to PLC, SCADA, RTU, and instrumentation systems while working closely with customers including the National Water Company (NWC) and Saudi Water Authority (SWA). The role requires strong technical expertise, field experience, troubleshooting capabilities, and direct interaction with customers during project execution and commissioning phases.<br>Key Responsibilities Lead site activities related to automation and control systems for water and wastewater projects. Perform installation, testing, commissioning, troubleshooting, and maintenance of PLC, SCADA, RTU, and instrumentation systems. Configure, program, and modify PLC and RTU applications as required for project execution. Support SCADA system integration, communication networks, and remote monitoring solutions. Conduct site surveys and assess automation system requirements. Supervise and coordinate field technicians and subcontractors during project implementation. Perform loop checking, I/O verification, FAT, SAT, and system commissioning activities. Diagnose control system faults and provide corrective actions to minimize downtime. Review and update project documentation including:I/O Lists Loop Diagrams As-Built Drawings FAT/SAT Reports Technical Reports O&M Manuals Ensure compliance with project specifications, customer requirements, and industry standards. Coordinate directly with clients and stakeholders during project execution and testing phases. Support project teams in preparing technical submittals and engineering documentation. Provide technical support and training to end users when required.<br>Required Qualifications Bachelor’s Degree in Electrical Engineering, Electronics Engineering, Instrumentation Engineering, or a related field. Minimum 7 years of experience in Automation and Control Systems, preferably within water and wastewater utility projects. Hands-on experience with PLC, SCADA, RTU, and instrumentation systems, including field devices and control panels. Experience working with Siemens, Schneider Electric (SE), SOFREL, or similar automation platforms. Strong knowledge of industrial communication protocols such as Modbus, Ethernet/IP, Profibus, Profinet, and DNP3. Proven experience in testing, commissioning, troubleshooting, and maintenance of automation and control systems. Ability to read and interpret P&IDs, control drawings, loop diagrams, and technical documentation. Previous experience working with National Water Company (NWC), Saudi Water Authority (SWA), or similar water utility clients is highly preferred. Strong communication, problem-solving, and customer-facing skills. Willingness to travel and work at project sites as required.<br>Preferred Experience Previous experience working with:National Water Company (NWC) Saudi Water Authority (SWA) Experience in water transmission, pumping stations, reservoirs, desalination, or wastewater facilities. Knowledge of telemetry and remote monitoring systems. Familiarity with cybersecurity considerations for industrial control systems.