وظائف طباعة ثلاثية الأبعاد في السعودية

1. JOB PURPOSEThe Interior Design (ID) Inspector, working closely under the direction of the Senior ID Site Architect & DSA Project Lead, will act as the Lead Consultant’s representative for all interior works. The role is responsible for monitoring, inspecting, and reporting on the coordination and execution of interior finishes and fit-out to ensure compliance with approved design intent, project specifications, quality standards, and contractual requirements. This includes coordinating with contractors and subcontractors, addressing design-related site issues, verifying workmanship and materials, and ensuring the delivery of high-quality interior outcomes in line with the project’s vision.<br>2. JOB ACCOUNTABILITIES LINKED TO OBJECTIVESGeneral Duties & Leadership Lead all inspection activities for interior design works in accordance with the construction contract, project specifications, and DSA’s QA/QC procedures. Coordinate closely with the Senior ID Site Architect and other sub-consultant staff for joint inspections and related tasks. Guide and support the full inspection team in their daily deliverables, ensuring consistency, accuracy, and compliance with quality standards. Follow and implement all relevant company and project work procedures in carrying out assigned duties.<br>Contract Familiarization & Procedures Access the works contract through the Senior ID Site Architect and review all requirements relevant to site supervision. Obtain from the Senior ID Site Architect:Staffing organization chart, lines of communication, and reporting structure. Roles and responsibilities matrix for all project team members. Project procedures, proformas, and templates for quality control and supervision. Protocols for inspections, material reviews, snagging, de-snagging, and project close-out.<br>Pre-Construction / Contractor Pre-Start Activities Verify contractor’s set-out and datum points, request and review site condition and existing services surveys. Coordinate with the contractor’s Health & Safety plan. Review and comment/approve contractor QA/QC manual, ITPs, and method statements for all ID works. Review and comment/approve subcontractors’ inspection test plans.<br>Document & Drawing Control Use contract-specified document control systems (e.g., Aconex, SNAGR, FORPROJECTS) to manage and track drawings, documents, and correspondence. Maintain a complete and current set of ID site documentation, including drawings, specifications, schedules, and progress updates.<br>Inspection & Quality Control Establish all ID inspection criteria and quality benchmarks using approved specifications, drawings, sample panels, and mock-ups. Attend and lead ID inspections for works in progress, materials, and mock-ups in line with approved QA/QC plans. Review and approve contractor documentation in advance of works starting. Maintain inspection records, weekly schedules, and progress mark-ups for inclusion in reports. Conduct and document off-site and factory inspections as required.<br>Meetings & Coordination Attend and actively participate in QA/QC meetings, contractor progress meetings, technical workshops, snagging/de-snagging meetings, and contract close-out sessions when required. Coordinate with contractors, subcontractors, and sub-consultants to resolve ID-related site issues promptly.<br>Reporting & Records Maintain a daily diary covering weather conditions, inspections, non-conformances, contractor resources, key events, and new activities. Prepare and maintain inspection logs, snagging/de-snagging schedules, status reports, and photographic progress records.<br>Project Close-Out & Handover Assist with final inspections, snagging, and de-snagging to ensure compliance with quality standards. Review and comment on as-built drawings, O&M manuals, and taking-over certificate documentation. Support the contractor in securing all local authority sign-offs (ID related).<br>Contractor Submittals, RFIs & Observations Receive, review, and respond to contractor RFIs, submittals, material approvals, and shop drawings within agreed timelines. Track and log all responses, coordinating with document control. Issue and manage Consultant Site Observations (CSOs) and Non-Conformance Notices (NCNs), ensuring timely close-out.<br>Administrative & HR Requirements Submit monthly timesheets and comply with leave notification procedures. Maintain updated contact details and emergency information. Meet regularly with the line manager to review performance, address issues, and clarify work instructions.<br>3. QUALIFICATION / EXPERIENCE / REQUIREMENTSDiploma or degree in Interior Design, Engineering, Architecture, or a related discipline from a recognized institution. Equivalent professional certifications will also be considered.10–15 years of proven site-based experience in interior design supervision, inspection, and quality control, preferably on large-scale, high-end projects. Prior Middle East experience is highly desirable, with familiarity in local authority regulations, construction practices, and quality standards. Proficient in Aconex, Bluebeam, Adobe Acrobat, Auto CAD, Microsoft Office Suite, and snagging/inspection software such as Field, SNAGR, and 4Projects. Knowledge of Revit is an advantage. Demonstrated ability to manage and monitor subordinate inspectors, coordinate with multi-disciplinary teams, and oversee inspection activities in alignment with project schedules and quality requirements. Capable of operating effectively in remote site environments while ensuring timely reporting, follow-up, and team performance monitoring. Strong eye for finishes, precision, and compliance with approved design intent.<br>4. COMPETENCIESStrong verbal and written communication abilities, capable of preparing clear and concise reports, conveying technical requirements, and engaging effectively with contractors, consultants, and project stakeholders. Proven ability to work cohesively within multi-disciplinary teams, fostering a cooperative work environment while maintaining focus on shared project objectives. Ability to perform effectively under tight deadlines and challenging site conditions, prioritizing tasks without compromising quality or compliance. A meticulous approach to inspecting finishes, reviewing documentation, and ensuring alignment with approved design intent, specifications, and quality standards. Skilled in planning, scheduling, and organizing inspection activities to align with construction programs, ensuring efficient workflow and timely delivery of outputs. Competence in tracking site progress against milestones, identifying potential delays or issues, and producing accurate, timely progress reports for the Senior ID Site Architect and client representatives.<br>Interested candidates can also send their CV to recruit.ksa@dsa.design, mentioning ‘Interior Design Inspector’ in the subject line

<p>Implement processes and procedures of the engineering standards.</p><p>Evaluate the current technical standards available within the government entity and obtain approval for the list of current technical standards, whether to continue working with them or modify them, or develop new technical standards.</p><p>Study and review plans, documents, and bidding documents provided by various design companies for projects of the Saudi Irrigation Authority (SIO), following the applicable standards and codes.</p><p>Participate in preparing technical specifications, quantity schedules, and tender documents for the projects undertaken by the SIO in the field of implementing pumping stations and water treatment pipelines. Also, review all tender documents and evaluate the technical proposals submitted by consultants and contractors until the contract award for these projects is completed.</p><p>Study the technical submissions from consultants and contractors and provide technical support to the SIO, along with appropriate recommendations regarding execution methods, materials, and samples mentioned in the terms, specifications, and quantity schedules.</p><p>Provide technical opinions in any disputes that arise between the SIO and contractors, offering advice and guidance to the client to clarify the correct position and enable the SIO to follow up on the matter.</p><p>Review and audit the final project drawings as executed and submitted to the client.</p><p>Participate in value engineering workshops for projects of the SIO to achieve maximum benefit from the projects with the highest quality and lowest cost.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor s degree in civil engineering.</li><li>Minimum 15 years of professional experience in a related role, with previous experience in PMC or PMO projects preferred.</li><li>Extensive experience in applying engineering standards in government projects.</li><li>Strong knowledge of technical standards and regulations.</li><li>Expertise in implementing design standards and specifications.</li><li>Skilled in reviewing plans and bidding documents.</li><li>Ability to prepare technical specifications and tender documents.</li><li>Excellent problem-solving and communication skills.</li><li>Detail-oriented with a focus on reviewing project drawings.</li><li>Familiarity with value engineering principles.</li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Date Posted:</b></p><br><br>2026-07-15&amp;#xa;&amp;#xa;<p><b>Country:</b></p><br><br>United States of America&amp;#xa;&amp;#xa;<p><b>Location:</b></p><br><br>US-AL-HUNTSVILLE-315 ~ 315 Bob Heath Dr ~ BOB HEATH&amp;#xa;&amp;#xa;<p><b>Position Role Type:</b></p><br><br>Onsite&amp;#xa;&amp;#xa;<p><b><span>U.S. Citizen, U.S. Person, or Immigration Status Requirements:</span> </b></p><br><br>Active and transferable U.S. government issued security clearance is required prior to start date.​ U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance​&amp;#xa;&amp;#xa;<p><b>Security Clearance Type: </b></p><br><br>DoD Clearance: Secret&amp;#xa;&amp;#xa;<p><b>Security Clearance Status: </b></p><br><br>Active and existing security clearance required on day 1<br><br><br><p>At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world.</p><br><br><br><p>Our Mission is to develop best in industry technologies that align product capabilities to the needs of our customer. We will empower our people to leverage design commonality and innovation, balancing risk and rigor, to achieve predictable and affordable solutions. We are looking for candidates willing to collaborate, innovate, and team with our engineers to generate and utilize today’s cutting-edge technology.</p><br><br><br><p>Effector Guidance Electronics is responsible for designing RF and Microwave hardware, including transmitters, receivers, and exciters. This includes design and test activities that span preliminary design to integration. Products we develop support radar and datalink applications on a variety of tactical missile programs. Critical to this role is designing for challenging mechanical constraints and extreme environments.</p><br><br><br><p><u><b>What You Will Do</b></u></p><br><br><ul><li><p>Design and development of transmitters, receivers or exciters</p><br><br></li><li><p>Design of circuit card assemblies (CCAs) with RF or mixed signals</p><br><br></li><li><p>Work in a lab to accomplish component characterization as well as module verification and integration</p><br><br></li><li><p>Test and handle sensitive RF Hardware</p><br><br></li><li><p>Schematic capture and RF routing</p><br><br></li><li><p>Partner with interdisciplinary teams - power, digital, mechanical, etc.</p><br><br></li></ul><p><br><u><b>Qualifications You Must Have</b></u></p><br><br><ul><li><p>Typically requires a Bachelor’s in Science, Technology, Engineering, or Mathematics (STEM) and a minimum of ten years of prior relevant experience</p><br><br></li><li><p>Experience to include any combination of the following:</p><br><br></li><li><p>RF design and fabrication</p><br><br></li><li><p>RF test and troubleshoot</p><br><br></li><li><p>Simulation of RF products</p><br><br></li><li><p>Experience with any of the following tools:</p><br><br></li><li><p>Mentor DX Designer or equivalent, High Frequency Structure Simulator (HFSS) or equivalent, SystemVue/Genesys or equivalent, Advanced Design System (ADS) or equivalent</p><br><br></li></ul><p><br><u><b>Qualifications We Prefer</b></u></p><br><br><ul><li><p>Seeker design expertise</p><br><br></li><li><p>Mentorship or apprenticeship experience&nbsp;</p><br><br></li><li><p>Technical oversight responsibilities for less-senior engineers</p><br><br></li><li><p>Working across domains on complex projects</p><br><br></li><li><p>Architecting and requirements definition for complex RF products</p><br><br></li><li><p>Team lead experience on technical projects including experience w/ cost and schedule</p><br><br></li><li><p>EVMS or CAM experience</p><br><br></li><li><p>Background in designing for manufacturability, producibility, and cost constraints. Includes yield and margin analysis</p><br><br></li><li><p>Technical background in the following areas:</p><br><br></li><li><p>Cascade analysis and/or frequency planning</p><br><br></li><li><p>Filter design and fabrication</p><br><br></li><li><p>Circuit card assembly design and fabrication</p><br><br></li><li><p>Testing or designing RF hybrid (chip and wire) technologies</p><br><br></li><li><p>High speed data converter test/characterization</p><br><br></li><li><p>High power RF design or test experience</p><br><br></li><li><p>Scripting experience (Matlab or Python)</p><br><br></li><li><p>Some front line leadership desirable</p><br><br></li></ul><p><br><u><b>What We Offer</b></u></p><br><br><p>Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation.</p><br><br><br><p>This position is an onsite role located in Huntsville, AL and is eligible for relocation assistance.</p><br><br><br><br><p><i><b>As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend&nbsp;select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.</b></i></p><br><br><br>The salary range for this role is 132,400 USD - 251,600 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills.<br><br><br>Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.<br><br>Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance.<br><br>This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply.<br><br>RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.<br><br><p><span><i>RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.</i> </span></p><br><br><br><br><p><b>Privacy Policy and Terms:</b></p><br><br><p><span>Click on this </span>link<span> to read the Policy and Terms</span></p><br><br><br> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> No experience required </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>In a world of possibilities, pursue one with endless opportunities. Imagine Next! At Parsons, you can imagine a career where you thrive, work with exceptional people, and be yourself. Guided by our leadership vision of valuing people, embracing agility, and fostering growth, we cultivate an innovative culture that empowers you to achieve your full potential. Unleash your talent and redefine what s possible.</p><p>Parsons are looking for an exceptional Manager - Design (Power Infrastructure) to join their team! In this role you will support the Senior Manager in assessing proposed localized power distribution networks and substation layouts to align with development schedules.</p><p>What You'll Be Doing;</p><ul><li>Assist in developing construction sequencing details and coordinate with contractors to optimize layout paths for MV cabling, switchgears, and ring main units (RMUs).</li><li>Contribute scheduling data and track timeline adjustments across power project packages to support broader utility masterplan objectives.</li><li>Provide key technical and metric inputs to assist early-stage cost estimation and budget tracking dashboards.</li><li>Maintain detailed program trackers, actively identifying local timeline gaps or scheduling risks to coordinate resolution paths.</li><li>Track site execution progress and report physical alignment deviations back to the Senior Manager.</li><li>Collaborate in preparing technical checklists and supporting documentation packets for Stage Gate approvals, with a primary focus on:</li><ul><li>Local distribution phasing schedules</li><li>Subcontractor coordination trackers</li><li>Interface and spatial utility clearance logs</li></ul></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>What You'll Bring;</p><ul><li>Bachelor's Degree in an Engineering or Construction related discipline from an accredited college or university (Electrical Engineering preferred)</li><li>10+ Years' experience in power utility delivery systems.</li><li>Experience in design, construction planning, and coordination of localized power networks, medium voltage (MV) distribution cabling, and substation infrastructure.</li><li>Familiarity with standard municipal design guidelines and utility integration codes.</li><li>Proficiency in spatial scheduling, identifying interface clashes, and planning coordination software (GIS/ Primavera).</li></ul><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Date Posted:</b></p><br><br>2026-07-16&amp;#xa;&amp;#xa;<p><b>Country:</b></p><br><br>United States of America&amp;#xa;&amp;#xa;<p><b>Location:</b></p><br><br>US-AL-HUNTSVILLE-315 ~ 315 Bob Heath Dr ~ BOB HEATH&amp;#xa;&amp;#xa;<p><b>Position Role Type:</b></p><br><br>Onsite&amp;#xa;&amp;#xa;<p><b><span>U.S. Citizen, U.S. Person, or Immigration Status Requirements:</span> </b></p><br><br>Active and transferable U.S. government issued security clearance is required prior to start date.​ U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance​&amp;#xa;&amp;#xa;<p><b>Security Clearance Type: </b></p><br><br>DoD Clearance: Secret&amp;#xa;&amp;#xa;<p><b>Security Clearance Status: </b></p><br><br>Active and existing security clearance required on day 1<br><br><br><p>At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world.</p><br><br><br><p>Our Mission is to develop best in industry technologies that align product capabilities to the needs of our customer. We will empower our people to leverage design commonality and innovation, balancing risk and rigor, to achieve predictable and affordable solutions. We are looking for candidates willing to collaborate, innovate, and team with our engineers to generate and utilize today’s cutting-edge technology.</p><br><br><br><p>Effector Guidance Electronics is responsible for designing RF and Microwave hardware, including transmitters, receivers, and exciters. This includes design and test activities that span preliminary design to integration. Products we develop support radar and datalink applications on a variety of tactical missile programs. Critical to this role is designing for challenging mechanical constraints and extreme environments.</p><br><br><br><p><u><b>What You Will Do</b></u></p><br><br><ul><li><p>Design and development of transmitters, receivers or exciters</p><br><br></li><li><p>Design of circuit card assemblies (CCAs) with RF or mixed signals</p><br><br></li><li><p>Work in a lab to accomplish component characterization as well as module verification and integration</p><br><br></li><li><p>Test and handle sensitive RF Hardware</p><br><br></li><li><p>Schematic capture and RF routing</p><br><br></li><li><p>Partner with interdisciplinary teams - power, digital, mechanical, etc.</p><br><br></li></ul><p><br><u><b>Qualifications You Must Have</b></u></p><br><br><ul><li><p>Typically requires a Bachelor’s in Science, Technology, Engineering, or Mathematics (STEM) and a minimum of two years of prior relevant experience</p><br><br></li><li><p>Experience to include any combination of the following:</p><br><br></li><li><p>RF design and fabrication</p><br><br></li><li><p>RF test and troubleshoot</p><br><br></li><li><p>Simulation of RF products</p><br><br></li><li><p>Experience with any of the following tools:</p><br><br></li><li><p>Mentor DX Designer or equivalent, High Frequency Structure Simulator (HFSS) or equivalent, SystemVue/Genesys or equivalent, Advanced Design System (ADS) or equivalent</p><br><br></li></ul><p><br><u><b>Qualifications We Prefer</b></u></p><br><br><ul><li><p>Working across domains on complex projects</p><br><br></li><li><p>Ability to prepare documentation with minimal oversight</p><br><br></li><li><p>Technical background in some of the following areas:</p><br><br></li><li><p>Cascade analysis and/or frequency planning</p><br><br></li><li><p>Filter design and fabrication</p><br><br></li><li><p>Circuit card assembly design and fabrication</p><br><br></li><li><p>Testing or designing RF hybrid (chip and wire) technologies</p><br><br></li><li><p>High speed data converter test/characterization</p><br><br></li><li><p>High power RF design or test experience</p><br><br></li><li><p>Scripting experience (Matlab or Python)</p><br><br></li></ul><p><br><u><b>What We Offer</b></u></p><br><br><p>Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation.</p><br><br><br><p>This position is an on-site role, located in Huntsville, AL and is eligible for relocation assistance.</p><br><br><br><br><p><i><b>As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend&nbsp;select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.</b></i></p><br><br><br>The salary range for this role is 68,900 USD - 131,100 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills.<br><br><br>Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.<br><br>Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance.<br><br>This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply.<br><br>RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.<br><br><p><span><i>RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.</i> </span></p><br><br><br><br><p><b>Privacy Policy and Terms:</b></p><br><br><p><span>Click on this </span>link<span> to read the Policy and Terms</span></p><br><br><br> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> No experience required </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

<p>WSP in the Middle East is currently hiring for an Interface &amp; Stakeholder Manager Aviation Projects to join our team in KSA. The Interface &amp; Stakeholder Manager will be responsible for managing all project interfaces across aviation sector stakeholders, including governmental authorities, airport operators, contractors, consultants, utility providers, and internal technical teams. The role ensures seamless coordination, clear communication, and the timely resolution of interface issues that may affect programme delivery. It also involves developing and implementing structured stakeholder engagement plans to maintain alignment, avoid conflicts, and support smooth project execution. The Manager will provide regular reporting to the Project Director, highlighting interface risks, dependencies, and mitigation strategies critical to the success of the aviation programme.</p><p>Lead and manage all interface activities across aviation stakeholders (government bodies, airport operators, contractors, consultants, utilities, and internal teams). Establish and maintain effective communication channels to ensure seamless coordination between all project parties. Identify, track, and resolve interface issues that could affect project progress, technical delivery, or schedule performance. Develop, implement, and maintain structured Stakeholder Engagement Plans to ensure alignment throughout all project phases. Facilitate interface workshops, coordination meetings, and technical discussions with project stakeholders. Liaise with regulatory authorities and airport operators to ensure compliance with aviation and infrastructure requirements. Prepare regular interface status reports and provide interface risk updates to the Project Director and leadership team. Maintain a comprehensive interface register, ensuring risks, dependencies, and actions are clearly documented and managed. Support integration between design, procurement, and construction teams, ensuring all disciplines are aligned. Promote a collaborative working environment across multidisciplinary teams</p><p><strong>Desired Candidate Profile</strong></p><p>Bachelor s degree in Engineering, Project Management, or a relevant field. 20+ years of experience in interface management, stakeholder management, or project coordination within large scale aviation or major infrastructure projects. Experience working with airport authorities, regulatory bodies, or large PMC/consultancy organisations (highly preferred). Strong technical understanding of aviation infrastructure, design processes, construction interfaces, and multi party coordination. Proven track record resolving complex interface issues in fast paced project environments.</p>

Requisition ID: 297769<br><br> Relocation Authorized: International - Single Telework Type: Full-Time Office/Project Work Location: Riyadh<br><br>Extraordinary Teams Building Inspiring Projects<br><br>Since 1898, we have helped customers complete more than 25,000 projects in 160 countries on all seven continents that have created jobs, grown economies, improved the resiliency of the world's infrastructure, increased access to energy, resources, and vital services, and made the world a safer, cleaner place.<br><br>Differentiated by the quality of our people and our relentless drive to deliver the most successful outcomes, we align our capabilities to our customers' objectives to create a lasting positive impact. We serve the Infrastructure; Nuclear, Security & Environmental; Energy; Mining & Metals, and the Manufacturing and Technology markets. Our services span from initial planning and investment, through start-up and operations.<br><br>Core to Bechtel is our Vision, Values and Commitments. They are what we believe, what customers can expect, and how we deliver. Learn more about our extraordinary teams building inspiring projects in our Impact Report.<br><br>Project Overview<br><br>Expo 2030 Riyadh is a global platform where countries, organizations, and individuals will come together to collaborate. Under the theme “Foresight for Tomorrow,” the Expo promotes sustainable development, innovation, and transformative thinking. The event will be held from October 2030 to March 2031 and is expected to welcome over 40 million visits. The 6 km² Masterplan outlines a comprehensive framework for participation and infrastructure at the Expo.<br><br>The exhibition space, totaling 491,100 m² GFA, can accommodate up to 197 participating countries and 29 international organizations. Working collaboratively with our customer, Expo 2030 Riyadh Company (ERC), Bechtel will manage the infrastructure program which comprises early works, utilities, and publicly accessible spaces like streets and parks. Our scope on the six-square-kilometer site will transition into a mixed-use legacy development to serve the community after the six-month event is over. The project’s master plan leverages international sustainability standards for urban afforestation, treated water, and energy sources.<br><br>Job Summary<br><br>In this role, you will manage the planning, design review, coordination, integration, and stakeholder management of mobility-related infrastructure packages including roads, highways, junctions, streetscapes, parking facilities, Park & Ride infrastructure, pedestrian networks, cycling infrastructure, transport-related utilities interfaces, and supporting civil works. You will coordinate with multiple consultants and stakeholders to ensure that infrastructure designs are integrated, constructible, compliant with project requirements, and aligned with programme objectives.<br><br>Your technical guidance and recommendations will ensure infrastructure designs meet project requirements and remain within scope, schedule, and budget.<br><br>Major Responsibilities<br><br>Reports to the Engineering Manager – Mobility & Civil Infrastructure. Responsible for the day-to-day management of mobility infrastructure design packages. Managing multidisciplinary consultants responsible for roads, highways, parking facilities, transport infrastructure, pedestrian environments, cycling facilities, and supporting civil works. Coordinating infrastructure design activities with planning, architecture, landscape, utilities, structures, operations, logistics, security, and adjacent development packages. Leading technical reviews and consultant comment resolution. Monitoring consultant performance against approved scope, programme, and deliverables. Reviewing design submissions for compliance with project requirements and applicable standards. Managing infrastructure-related interfaces between horizontal and vertical development packages. Supporting constructability reviews, phasing reviews, staging assessments, and traffic management considerations. Identifying design risks, technical issues, programme constraints, and interface conflicts. Managing infrastructure-related design changes and ensuring impacts are assessed and appropriately coordinated. Supporting stakeholder engagement with authorities, operators, utility agencies, and project teams. Tracking actions, deliverables, approvals, and review comments through to closure. Preparing technical reports, presentations, and recommendations for management review.<br><br>Education And Experience Requirements<br><br>Requires bachelor's or master's degree (or international equivalent) in Civil Engineering, Transportation Engineering, or related discipline.15+ years transportation or civil infrastructure experience.7+ years in a design management, engineering management, or lead engineering role.<br><br>Required Knowledge And Skills<br><br>Major programme experience involving highways, roads, transport infrastructure, airports, metro systems, Expo projects, or similar megaproject developments. Experience managing multidisciplinary design consultants. Strong understanding of infrastructure coordination and interface management. Strong stakeholder and authority management skills.<br><br>Total Rewards/Benefits<br><br>For decades, Bechtel has worked to inspire the next generation of employees and beyond! Because our teams face some of the world's toughest challenges, we offer robust benefits to ensure our people thrive. Whether it is advancing careers, delivering programs to enhance our culture, or providing time to recharge, Bechtel has the benefits to build a legacy of sustainable growth. Learn more at Bechtel Total Rewards<br><br>Diverse Teams Build The Extraordinary<br><br>As a global company, Bechtel has long been home to a vibrant multitude of nationalities, cultures, ethnicities, and life experiences. This diversity has made us a more trusted partner, more effective problem solvers and innovators, and a more attractive destination for leading talent.<br><br>We are committed to being a company where every colleague feels that they belong-where colleagues feel part of "One Team," respected and rewarded for what they bring, supported in pursuing their goals, invested in our values and purpose, and treated equitably. Click here to learn more about the people who power our legacy.<br><br>Bechtel is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity and expression, age, national origin, disability, citizenship status (except as authorized by law), protected veteran status, genetic information, and any other characteristic protected by federal, state or local law. Applicants with a disability, who require a reasonable accommodation for any part of the application or hiring process, may e-mail their request to acesstmt@bechtel.com

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Date Posted:</b></p><br><br>2026-07-16&amp;#xa;&amp;#xa;<p><b>Country:</b></p><br><br>United States of America&amp;#xa;&amp;#xa;<p><b>Location:</b></p><br><br>US-AL-HUNTSVILLE-315 ~ 315 Bob Heath Dr ~ BOB HEATH&amp;#xa;&amp;#xa;<p><b>Position Role Type:</b></p><br><br>Onsite&amp;#xa;&amp;#xa;<p><b><span>U.S. Citizen, U.S. Person, or Immigration Status Requirements:</span> </b></p><br><br>Active and transferable U.S. government issued security clearance is required prior to start date.​ U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance​&amp;#xa;&amp;#xa;<p><b>Security Clearance Type: </b></p><br><br>DoD Clearance: Secret&amp;#xa;&amp;#xa;<p><b>Security Clearance Status: </b></p><br><br>Active and existing security clearance required on day 1<br><br><br><p>At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world.</p><br><br><br><p>Our Mission is to develop best in industry technologies that align product capabilities to the needs of our customer. We will empower our people to leverage design commonality and innovation, balancing risk and rigor, to achieve predictable and affordable solutions. We are looking for candidates willing to collaborate, innovate, and team with our engineers to generate and utilize today’s cutting-edge technology.</p><br><br><br><p>Effector Guidance Electronics is responsible for designing RF and Microwave hardware, including transmitters, receivers, and exciters. This includes design and test activities that span preliminary design to integration. Products we develop support radar and datalink applications on a variety of tactical missile programs. Critical to this role is designing for challenging mechanical constraints and extreme environments.</p><br><br><br><p><u><b>What You Will Do</b></u></p><br><br><ul><li><p>Design and development of transmitters, receivers or exciters</p><br><br></li><li><p>Design of circuit card assemblies (CCAs) with RF or mixed signals</p><br><br></li><li><p>Work in a lab to accomplish component characterization as well as module verification and integration</p><br><br></li><li><p>Test and handle sensitive RF Hardware</p><br><br></li><li><p>Schematic capture and RF routing</p><br><br></li><li><p>Partner with interdisciplinary teams - power, digital, mechanical, etc.</p><br><br></li></ul><p><br><u><b>Qualifications You Must Have</b></u></p><br><br><ul><li><p>Typically requires a Bachelor’s Degree in Science, Technology, Engineering, or Mathematics (STEM) and a minimum of eight (8) years of prior relevant experience</p><br><br></li><li><p>Experience to include any combination of the following:</p><br><br></li><li><p>RF design and fabrication</p><br><br></li><li><p>RF test and troubleshoot</p><br><br></li><li><p>Simulation of RF products</p><br><br></li><li><p>Experience with any of the following tools:</p><br><br></li><li><p>Mentor DX Designer or equivalent, High Frequency Structure Simulator (HFSS) or equivalent, SystemVue/Genesys or equivalent, Advanced Design System (ADS) or equivalent</p><br><br></li></ul><br><p><u><b>Qualifications We Prefer</b></u></p><br><br><ul><li><p>Mentorship or apprenticeship experience&nbsp;</p><br><br></li><li><p>Technical oversight responsibilities for less-senior engineers</p><br><br></li><li><p>Working across domains on complex projects</p><br><br></li><li><p>Architecting and requirements definition for complex RF products</p><br><br></li><li><p>Team lead experience on technical projects including experience w/ cost and schedule</p><br><br></li><li><p>EVMS or CAM experience</p><br><br></li><li><p>Background in designing for manufacturability, producibility, and cost constraints.&nbsp;Includes yield and margin analysis</p><br><br></li><li><p>Technical background in the following areas:</p><br><br></li><li><p>Cascade analysis and/or frequency planning</p><br><br></li><li><p>Filter design and fabrication</p><br><br></li><li><p>Circuit card assembly design and fabrication</p><br><br></li><li><p>Testing or designing RF hybrid (chip and wire) technologies</p><br><br></li><li><p>High speed data converter test/characterization</p><br><br></li><li><p>High power RF design or test experience</p><br><br></li><li><p>Scripting experience (Matlab or Python)</p><br><br></li><li><p>Some front line leadership desirable</p><br><br></li></ul><p><br><u><b>What We Offer</b></u></p><br><br><p>Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation.</p><br><br><br><p>This position is an onsite role, located in Huntsville, AL and is eligible for relocation assistance.</p><br><br><br><br><br><p><i><b>As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend&nbsp;select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.</b></i></p><br><br><br>The salary range for this role is 107,500 USD - 204,500 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills.<br><br><br>Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.<br><br>Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance.<br><br>This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply.<br><br>RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.<br><br><p><span><i>RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.</i> </span></p><br><br><br><br><p><b>Privacy Policy and Terms:</b></p><br><br><p><span>Click on this </span>link<span> to read the Policy and Terms</span></p><br><br><br> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> No experience required </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Date Posted:</b></p><br><br>2026-07-16&amp;#xa;&amp;#xa;<p><b>Country:</b></p><br><br>United States of America&amp;#xa;&amp;#xa;<p><b>Location:</b></p><br><br>US-AL-HUNTSVILLE-315 ~ 315 Bob Heath Dr ~ BOB HEATH&amp;#xa;&amp;#xa;<p><b>Position Role Type:</b></p><br><br>Onsite&amp;#xa;&amp;#xa;<p><b><span>U.S. Citizen, U.S. Person, or Immigration Status Requirements:</span> </b></p><br><br>Active and transferable U.S. government issued security clearance is required prior to start date.​ U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance​&amp;#xa;&amp;#xa;<p><b>Security Clearance Type: </b></p><br><br>DoD Clearance: Secret&amp;#xa;&amp;#xa;<p><b>Security Clearance Status: </b></p><br><br>Active and existing security clearance required on day 1<br><br><br><p>At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world.</p><br><br><br><p>Our Mission is to develop best in industry technologies that align product capabilities to the needs of our customer. We will empower our people to leverage design commonality and innovation, balancing risk and rigor, to achieve predictable and affordable solutions. We are looking for candidates willing to collaborate, innovate, and team with our engineers to generate and utilize today’s cutting-edge technology.</p><br><br><br><p>Effector Guidance Electronics is responsible for designing RF and Microwave hardware, including transmitters, receivers, and exciters. This includes design and test activities that span preliminary design to integration. Products we develop support radar and datalink applications on a variety of tactical missile programs. Critical to this role is designing for challenging mechanical constraints and extreme environments.</p><br><br><br><p><u><b>What You Will Do</b></u></p><br><br><ul><li><p>Design and development of transmitters, receivers or exciters</p><br><br></li><li><p>Design of circuit card assemblies (CCAs) with RF or mixed signals</p><br><br></li><li><p>Work in a lab to accomplish component characterization as well as module verification and integration</p><br><br></li><li><p>Test and handle sensitive RF Hardware</p><br><br></li><li><p>Schematic capture and RF routing</p><br><br></li><li><p>Partner with interdisciplinary teams - power, digital, mechanical, etc.</p><br><br></li></ul><p><br><u><b>Qualifications You Must Have</b></u></p><br><br><ul><li><p>Typically requires a Bachelor’s in Science, Technology, Engineering, or Mathematics (STEM) and a minimum of five (5) years of prior relevant experience</p><br><br></li><li><p>Experience to include any combination of the following:</p><br><br></li><li><p>RF design and fabrication</p><br><br></li><li><p>RF test and troubleshoot</p><br><br></li><li><p>Simulation of RF products</p><br><br></li><li><p>Experience with any of the following tools:</p><br><br></li><li><p>Mentor DX Designer or equivalent, High Frequency Structure Simulator (HFSS) or equivalent, SystemVue/Genesys or equivalent, Advanced Design System (ADS) or equivalent</p><br><br></li></ul><p><br><u><b>Qualifications We Prefer</b></u></p><br><br><ul><li><p>Technical oversight responsibilities for less-senior engineers</p><br><br></li><li><p>Working across domains on complex projects</p><br><br></li><li><p>Team lead experience on technical projects including experience w/ cost and schedule</p><br><br></li><li><p>EVMS or CAM experience</p><br><br></li><li><p>Ability to prepare documentation with minimal oversight</p><br><br></li><li><p>Technical background in the following areas:</p><br><br></li><li><p>Cascade analysis and/or frequency planning</p><br><br></li><li><p>Filter design and fabrication</p><br><br></li><li><p>Circuit card assembly design and fabrication</p><br><br></li><li><p>Testing or designing RF hybrid (chip and wire) technologies</p><br><br></li><li><p>High speed data converter test/characterization</p><br><br></li><li><p>High power RF design or test experience</p><br><br></li><li><p>Scripting experience (Matlab or Python)</p><br><br></li><li><p>Some front line leadership desirable</p><br><br></li></ul><p><br><u><b>What We Offer</b></u></p><br><br><p>Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation.</p><br><br><br><p>This position is an onsite role, located in Huntsville, AL and is eligible for relocation assistance.</p><br><br><br><br><p><i><b>As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend&nbsp;select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.</b></i></p><br><br><br>The salary range for this role is 86,800 USD - 165,200 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills.<br><br><br>Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.<br><br>Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance.<br><br>This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply.<br><br>RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.<br><br><p><span><i>RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.</i> </span></p><br><br><br><br><p><b>Privacy Policy and Terms:</b></p><br><br><p><span>Click on this </span>link<span> to read the Policy and Terms</span></p><br><br><br> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> No experience required </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

<h3 >About Hamilton Bradshaw MENA</h3> <p >Hamilton Bradshaw is the private investment firm of James Caan CBE, with over 20 years of experience investing directly in more than 33 businesses. The firm typically acquires majority stakes and partners with founders to scale service-led companies across various sectors, including financial services, real estate, digital media, and marketing. Hamilton Bradshaw has recently invested in a new architecture and design practice, headquartered in Dubai, which focuses on high-end hospitality, residential, and mixed-use projects across the GCC and internationally.</p> <h3 >The Role of Non-Executive Director / Strategic Adviser</h3> <p >Hamilton Bradshaw MENA is seeking an experienced and well-connected <strong >Non-Executive Director / Strategic Adviser</strong> to support the founder and Board of a new architecture and design practice. This contract role is based in Saudi Arabia, specifically in Jeddah and Riyadh, and is intended to be hands-on and commercially focused. The successful candidate will play a key role in establishing and growing the practice's presence across Saudi Arabia and the wider GCC region, providing practical advice on opportunities and leveraging local relationships.</p> <h3 >Key Responsibilities</h3> <ul > <li >Supporting the founder on live pitches, proposals, and client strategy.</li> <li >Advising on pricing, commercial positioning, and strategies to approach and convert opportunities.</li> <li >Providing insight into the Saudi architecture, design, and development market, including project commissioning and awarding processes.</li> <li >Making relevant introductions to potential clients, partners, and other key decision-makers.</li> <li >Assisting in identifying and developing new commercial opportunities.</li> <li >Advising on navigating local business networks and decision-making structures.</li> <li >Providing practical strategic advice as the business establishes and scales its Saudi presence.</li> <li >Acting as a sounding board to the founder and offering constructive commercial challenge.</li> <li >Supporting the Board on the wider development of the practice across Saudi Arabia and the GCC.</li> </ul> <h3 >Candidate Profile</h3> <p >The ideal candidate will combine strong Saudi market knowledge with a practical, entrepreneurial approach. This role requires over 10 years of experience. We are seeking an individual who is <strong >accessible, engaged, and willing to work closely with the founder</strong>, rather than a senior industry figure whose experience is primarily suited to governance roles within large established organizations.</p> <h3 >The Opportunity</h3> <p >This position offers an influential role in building a new architecture and design practice with significant ambitions across Saudi Arabia and the wider GCC. The successful candidate will work closely with the founder, the Hamilton Bradshaw investment team, and the Board, with the opportunity to make a direct contribution to the practice's commercial development and growth. Competitive, market-aligned remuneration will be offered.</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> About Noon<p><strong><em>Radically Changing the Way People Learn!</em></strong></p><br><p><strong>Noon Academy</strong>is the leading edtech platform in the Middle East, with over 12<span> million students and teachers using our app to learn, teach, and collaborate. We have recently raised $41 million in Series B funding to expand our reach and impact in the region and beyond. We are on a mission to transform the physical classroom experience by introducing our highly engaging social, group-based learning and AI to make learning fun and improve learning efficacy. Our ultimate goal is to provide access to the best teachers to every student even if that teacher is only available virtuall</span>y. We believe we can do this if we blend AI, peer-to-peer learning, and a carefully designed physical space.</p><br><p><span>Hear it directly from our CEO and co-founder: </span><strong>this</strong><span><strong><br>Learn more about us:</strong></span><span><strong> here</strong></span></p><br><br><p><span><strong>Now: We’re laser-focused on reinventing schools in Saudi Arabia. We’re accelerating rapidly, well-funded, and profitable.<br>Office: Full-time, Riyadh-based. We’ve got a sweet office near the Boulevard, and we’d love to have you in it.</strong></span></p><br><span><strong>About the role</strong></span><p><span><strong>Noon is changing how students in Saudi learn — a remote star teacher, a physical classroom, an in-room facilitator, and a content engine that has to keep up with all of it. The Learning Team owns that engine: term plans, session design, question banks, and assessments across Qudrat, Tahsili, Nafes, the National Curriculum, and our International track. We're hiring a Learning Design Manager to run the Sciences (Biology / Chemistry) side of it.</strong></span></p><br><p><span><strong>This is a management and delivery role, not an academic one. You will not be writing lessons — your four Design Leads do that, and they're the subject-matter experts. Your job is to make sure the right content gets built, to the right standard, on time, every single term, by a team that gets better each cycle. If you've spent your career as an individual contributor designing curriculum, this isn't your role. If you've spent it getting a team of specialists to ship reliably under pressure, keep reading.</strong></span></p><br><span><strong>What you'll own</strong></span><ul><li><p><span><strong>The team. Four Design Leads covering Biology (Tahsili), Chemistry (Tahsili), Science (Middle School &amp;amp; Nafes), and Bio &amp;amp; Chem (International) — plus content creators and a QA contractor. You own their goals, their 1:1s, their feedback, their growth, and hiring for the seats that are still open.</strong></span></p><br></li><li><p><span><strong>The delivery plan. The science content roadmap end-to-end: what gets built, in what order, by whom, by when, across Grades 7–12 on both the National and International tracks. At any moment, you know what's on track, what's slipping, and what you're doing about it.</strong></span></p><br></li><li><p><span><strong>The operating cadence. Capacity planning, production planning, prioritisation calls, and unblocking. You run the rituals that keep a multi-subject, multi-grade pipeline moving without weekly firefighting.</strong></span></p><br></li><li><p><span><strong>The quality bar. Working with Learning Excellence and the Head Teachers to set design standards, review gates, and QA workflows — so quality is a repeatable process, not a heroic effort by whoever cares most.</strong></span></p><br></li><li><p><span><strong>The feedback loop. Exit Ticket, Diagnostic, End-of-Chapter, and Learning Gain data already exist. You make it actually change what gets built next term, in partnership with Data and Learning Excellence.</strong></span></p><br></li><li><p><span><strong>Cross-functional delivery. Head Teachers, Learning Excellence, Product, Engineering, Data, customer experience and School Ops all touch this pipeline. You're the person who makes those handoffs work.</strong></span></p><br></li><li><p><span><strong>Scale. Build the templates, trackers, playbooks, and review rituals that let content volume grow without headcount growing in lockstep — including our move toward AI-assisted content production.</strong></span></p><br></li></ul><span><strong>What we're looking for</strong></span><span><strong>Must have</strong></span><ul><li><p><span><strong>3–5+ years managing people (5 preferred; 3 acceptable if you're exceptional elsewhere).</strong></span></p><br></li><li><p><span><strong>Background in tech or education — ideally both. Edtech platforms, Saudi tech startups, or learning organisations that ship on a schedule.</strong></span></p><br></li><li><p><span><strong>Proven delivery in a fast-paced, ambiguous environment. Decisive, self-driven, comfortable making a call with incomplete information and owning the outcome.</strong></span></p><br></li><li><p><span><strong>Fluent Arabic and strong professional English.</strong></span></p><br></li><li><p><span><strong>Based in Riyadh.</strong></span></p><br></li></ul><span><strong>Nice to have</strong></span><ul><li><p><span><strong>Certification in instructional design or e-learning</strong></span></p><br></li><li><p><span><strong>Familiarity with Saudi national assessments — Tahsili, Qudrat, Nafes</strong></span></p><br></li><li><p><span><strong>Experience managing distributed teams, contractors, or freelance production pools</strong></span></p><br></li><li><p><span><strong>Comfort with data tooling, dashboards, and AI-assisted content workflows</strong></span></p><br></li><li><p><span><strong>Experience in international or multicultural teams</strong></span></p><br></li></ul><span><strong>Why this role</strong></span><ul><li><p><span><strong>Real scope from day one — 4 Design Leads, a contractor pool, six programs, Grades 7 through 12, both National and International tracks.</strong></span></p><br></li><li><p><span><strong>You're building the function, not inheriting it. The seat is new. The operating system for how science content gets produced at Noon is largely yours to define.</strong></span></p><br></li><li><p><span><strong>Short line to decisions — you report to the Head of Learning Operations and work directly with the Chief Learning Officer.</strong></span></p><br></li><li><p><span><strong>A real scoreboard. Learning gain, exam outcomes, and delivery reliability are measurable. You'll know whether you're winning.</strong></span></p><br></li></ul> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> 2+ years </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> About Noon<p><strong><em>Radically Changing the Way People Learn!</em></strong></p><br><p><strong>Noon Academy</strong>is the leading edtech platform in the Middle East, with over 12<span> million students and teachers using our app to learn, teach, and collaborate. We have recently raised $41 million in Series B funding to expand our reach and impact in the region and beyond. We are on a mission to transform the physical classroom experience by introducing our highly engaging social, group-based learning and AI to make learning fun and improve learning efficacy. Our ultimate goal is to provide access to the best teachers to every student even if that teacher is only available virtuall</span>y. We believe we can do this if we blend AI, peer-to-peer learning, and a carefully designed physical space.</p><br><p><span>Hear it directly from our CEO and co-founder: </span><strong>this</strong><span><strong><br>Learn more about us:</strong></span><span><strong> here</strong></span></p><br><br><p><span><strong>Now: We’re laser-focused on reinventing schools in Saudi Arabia. We’re accelerating rapidly, well-funded, and profitable.<br>Office: Full-time, Riyadh-based. We’ve got a sweet office near the Boulevard, and we’d love to have you in it.</strong></span></p><br><span><strong>About the role</strong></span><p><span><strong>Noon is changing how students in Saudi learn — a remote star teacher, a physical classroom, an in-room facilitator, and a content engine that has to keep up with all of it. The Learning Team owns that engine: term plans, session design, question banks, and assessments across Qudrat, Tahsili, Nafes, the National Curriculum, and our International track. We're hiring a Learning Design Manager to run the Sciences (Biology / Chemistry) side of it.</strong></span></p><br><p><span><strong>This is a management and delivery role, not an academic one. You will not be writing lessons — your four Design Leads do that, and they're the subject-matter experts. Your job is to make sure the right content gets built, to the right standard, on time, every single term, by a team that gets better each cycle. If you've spent your career as an individual contributor designing curriculum, this isn't your role. If you've spent it getting a team of specialists to ship reliably under pressure, keep reading.</strong></span></p><br><span><strong>What you'll own</strong></span><ul><li><p><span><strong>The team. Four Design Leads covering Biology (Tahsili), Chemistry (Tahsili), Science (Middle School &amp;amp; Nafes), and Bio &amp;amp; Chem (International) — plus content creators and a QA contractor. You own their goals, their 1:1s, their feedback, their growth, and hiring for the seats that are still open.</strong></span></p><br></li><li><p><span><strong>The delivery plan. The science content roadmap end-to-end: what gets built, in what order, by whom, by when, across Grades 7–12 on both the National and International tracks. At any moment, you know what's on track, what's slipping, and what you're doing about it.</strong></span></p><br></li><li><p><span><strong>The operating cadence. Capacity planning, production planning, prioritisation calls, and unblocking. You run the rituals that keep a multi-subject, multi-grade pipeline moving without weekly firefighting.</strong></span></p><br></li><li><p><span><strong>The quality bar. Working with Learning Excellence and the Head Teachers to set design standards, review gates, and QA workflows — so quality is a repeatable process, not a heroic effort by whoever cares most.</strong></span></p><br></li><li><p><span><strong>The feedback loop. Exit Ticket, Diagnostic, End-of-Chapter, and Learning Gain data already exist. You make it actually change what gets built next term, in partnership with Data and Learning Excellence.</strong></span></p><br></li><li><p><span><strong>Cross-functional delivery. Head Teachers, Learning Excellence, Product, Engineering, Data, customer experience and School Ops all touch this pipeline. You're the person who makes those handoffs work.</strong></span></p><br></li><li><p><span><strong>Scale. Build the templates, trackers, playbooks, and review rituals that let content volume grow without headcount growing in lockstep — including our move toward AI-assisted content production.</strong></span></p><br></li></ul><span><strong>What we're looking for</strong></span><span><strong>Must have</strong></span><ul><li><p><span><strong>3–5+ years managing people (5 preferred; 3 acceptable if you're exceptional elsewhere).</strong></span></p><br></li><li><p><span><strong>Background in tech or education — ideally both. Edtech platforms, Saudi tech startups, or learning organisations that ship on a schedule.</strong></span></p><br></li><li><p><span><strong>Proven delivery in a fast-paced, ambiguous environment. Decisive, self-driven, comfortable making a call with incomplete information and owning the outcome.</strong></span></p><br></li><li><p><span><strong>Fluent Arabic and strong professional English.</strong></span></p><br></li><li><p><span><strong>Based in Riyadh.</strong></span></p><br></li></ul><span><strong>Nice to have</strong></span><ul><li><p><span><strong>Certification in instructional design or e-learning</strong></span></p><br></li><li><p><span><strong>Familiarity with Saudi national assessments — Tahsili, Qudrat, Nafes</strong></span></p><br></li><li><p><span><strong>Experience managing distributed teams, contractors, or freelance production pools</strong></span></p><br></li><li><p><span><strong>Comfort with data tooling, dashboards, and AI-assisted content workflows</strong></span></p><br></li><li><p><span><strong>Experience in international or multicultural teams</strong></span></p><br></li></ul><span><strong>Why this role</strong></span><ul><li><p><span><strong>Real scope from day one — 4 Design Leads, a contractor pool, six programs, Grades 7 through 12, both National and International tracks.</strong></span></p><br></li><li><p><span><strong>You're building the function, not inheriting it. The seat is new. The operating system for how science content gets produced at Noon is largely yours to define.</strong></span></p><br></li><li><p><span><strong>Short line to decisions — you report to the Head of Learning Operations and work directly with the Chief Learning Officer.</strong></span></p><br></li><li><p><span><strong>A real scoreboard. Learning gain, exam outcomes, and delivery reliability are measurable. You'll know whether you're winning.</strong></span></p><br></li></ul> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> 2+ years </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

<p>About the Role The Manager - Learning Design and Delivery is responsible for the design, development and delivery of learning content and programs that support business objectives. We are looking for someone with hands-on experience designing and developing learning, a passion for learning innovation and a drive to collaborate with stakeholders across Qiddiya to build learning modules that create value for employees and the wider business. If you re excited by the thought of partnering with Subject Matter Experts (SMEs) to identify learning needs, design engaging learning modules that resonate play (but create serious impact) and deliver learning experiences that grow the people who are developing the world s first city of play - then we d love to talk to you!</p><p>Business &amp; SME Partnership</p><p>Partner with Business-based subject matter experts, to translate business needs into clear learning objectives and success measures with a primary focus on the Development Organization within Qiddiya. Ensure learning solutions support approved policies, processes, technical standards, learning programs or winning behaviors. Proactively manage stakeholders to align priorities, timelines, and delivery. Work as part of a cohesive Organizational Learning team to drive holistic learning solutions</p><p>Instructional Design &amp; Learning Delivery</p><p>Build learning content, learning programs and curriculum using Sana - our innovative Learning Experience Platform that delivers self-led and facilitated learning content. Design and deliver a range of engaging learning solutions that drive foundational awareness, ensure compliance with processes, build technical skills or grow capabilities important to Qiddiya. Co-facilitate learning workshops with Subject Matter Experts or other experienced facilitators, such as inductions, bootcamps or live sessions. Balance rigor with creativity, using experiential and playful methods to reinforce business outcomes in line with adult learning principles.</p><p>Learning Architecture, Governance &amp; Content Quality</p><p>Uphold agreed Learning governance standards. Build and maintain structured curricula, pathways, and learning spaces to support capability development. Ensure content is current, accessible, well structured, and easy to retrieve. Act as a quality custodian, aligning all content to learning objectives, standards, and Qiddiya design principles (hint you wouldn t simply upload a user manual or policy and call it training!)</p><p>Learning Innovation</p><p>Leverage AI to design storyboards, modular content, gamified checkpoints, interactions, and simulations. Explore and implement new approaches that enhance engagement, experimentation, and learning effectiveness.</p><p>Assessment, Measurement &amp; Learning Impact</p><p>Design assessments and activities that measure outcomes, reinforce skills, and demonstrate learning impact. Analyze feedback, engagement, and performance data to continuously improve learning quality.</p><p>Reporting &amp; Continuous Improvement</p><p>Provide clear reporting to senior stakeholders on outcomes, insights, and improvement opportunities. Demonstrate alignment to priority capability needs and curriculum roadmaps. Share best practices and innovations across the learning community to drive continuous improvement.</p><p>Key Requirements</p><p>Experience &amp; Background</p><p>6 - 10 years of experience in the fields Instructional Design, Learning Creation or a role where you have directly created learning solutions (including appropriate content creation) across a range of subjects. Strong business acumen, preferably with exposure to property development, construction, engineering , infrastructure or transport sectors. Proven track record of designing and delivering blended training programs and curriculum that create impact and drive higher business and human performance and compliance. Experience in developing interactions, learning games, activities or assessments that reinforce learning. Proficiency in managing multiple learning or business projects simultaneously. Understand skills-based education, data-informed learning journeys and immersive storytelling. Experience using best-in-class learning technologies for content creation and learning experience. Experience using Sana Learn would be advantageous. Experience with, or an interest in AI Prompt-driven development, would be advantageous. Flexibility and adaptability in responding to changing business requirements. Ability to effectively manage and prioritize workload and deliver to tight deadlines. Demonstrated strong written and verbal skills in English. Demonstrated proficient use of enterprise-level software, such as Microsoft 365 or similar Ability to work collaboratively in a team environment and across multiple departments, proven ability to empathize across cultures and different teams. Excellent problem-solving, decision-making, and conflict resolution skills.</p><p>Skills &amp; Capabilities</p><p>Passionate about creating playful learning experiences that create serious outcomes Instructional designer mindset with a focus on creating positive business outcomes Technical ability with learning authoring tools and the interface with learning technologies Exceptional ability to use storytelling to create powerful learning outcomes Highly organized, ability to simplify complex content into impactful learning Excellent problem solving skills with a proactive approach to improvement Highly collaborative communicator who can work across HR, IT, vendors, and business teams Curious, adaptable, and energized by the growth and performance of people</p><p><br></p><p><strong>Desired Candidate Profile</strong></p><p>6 - 10 years of experience in the fields Instructional Design, Learning Creation or a role where you have directly created learning solutions (including appropriate content creation) across a range of subjects. Strong business acumen, preferably with exposure to property development, construction, engineering , infrastructure or transport sectors. Proven track record of designing and delivering blended training programs and curriculum that create impact and drive higher business and human performance and compliance. Experience in developing interactions, learning games, activities or assessments that reinforce learning. Proficiency in managing multiple learning or business projects simultaneously. Understand skills-based education, data-informed learning journeys and immersive storytelling. Experience using best-in-class learning technologies for content creation and learning experience. Experience using Sana Learn would be advantageous. Experience with, or an interest in AI Prompt-driven development, would be advantageous. Flexibility and adaptability in responding to changing business requirements. Ability to effectively manage and prioritize workload and deliver to tight deadlines. Demonstrated strong written and verbal skills in English. Demonstrated proficient use of enterprise-level software, such as Microsoft 365 or similar Ability to work collaboratively in a team environment and across multiple departments, proven ability to empathize across cultures and different teams. Excellent problem-solving, decision-making, and conflict resolution skills.</p><p>Skills &amp; Capabilities</p><p>Passionate about creating playful learning experiences that create serious outcomes Instructional designer mindset with a focus on creating positive business outcomes Technical ability with learning authoring tools and the interface with learning technologies Exceptional ability to use storytelling to create powerful learning outcomes Highly organized, ability to simplify complex content into impactful learning Excellent problem solving skills with a proactive approach to improvement Highly collaborative communicator who can work across HR, IT, vendors, and business teams Curious, adaptable, and energized by the growth and performance of people</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>We are seeking an Inplant Principal Piping Layout Engineering Design (SME) to serve as the Technical Authority across our portfolio of energy, oil &amp; gas, mining, industrial and infrastructure projects in Saudi Arabia.</p><br><p>The successful candidate will provide technical leadership throughout the project lifecycle, including proposals, concept studies, FEED, detailed engineering, construction support and commissioning. Acting as the highest level of technical authority within their discipline, the successful candidate will provide specialist expertise, ensure engineering excellence, strengthen technical governance and support the delivery of safe, innovative and high-quality engineering solutions.</p><br><p>In addition to supporting projects, the SME will mentor engineering teams, establish and maintain technical standards, support business development activities, contribute to technical assurance and build trusted relationships with clients and key stakeholders across the region.</p><br><br> Wood is a global leader in consulting, engineering and operations for the energy and materials sectors. With 33,000 people in around 50 countries, Wood supports clients across the full asset lifecycle, delivering safe, predictable outcomes while enabling resilient operations and a lower carbon future. Wood forms the Energy &amp; Materials pillar of Sidara - a global partnership uniting leading multidisciplinary engineering, design, and project management companies. www.woodgroup.com<br> <b>Diversity Statement&nbsp;</b><br> We are an equal opportunity employer that recognises the value of a diverse workforce. All suitably qualified applicants will receive consideration for employment on the basis of objective criteria and without regard to the following (which is a non-exhaustive list): race, colour, age, religion, gender, national origin, disability, sexual orientation, gender identity, protected veteran status, or other characteristics in accordance with the relevant governing laws.<br> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> 8+ years </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

<p>Purpose of Job Jobholders at this level are responsible for leading work activities and working autonomously with minor direction towards predetermined long-term objectives. Jobholders might act as internal consultants and facilitators through providing guidance to deliver and perform operational activities. Their main operational role includes including providing expert support in the development of IT infrastructure and systems design and capabilities. Lead the development of IT infrastructure and systems RFPs. Supervise the assessment of the change requests related to IT infrastructure and systems. Review the actual performance of ZATCA IT Infrastructure and systems components against set of KPIs and provide recommendations for improvement.</p><p>Job Resposiblites</p><p>Job Details</p><p>Infrastructure and Systems Design</p><p>Follow latest trends and cutting-edge technologies, collect business and technical requirements, assess current ZATCA IT infrastructure and systems, identify design gaps and challenges and develop new detailed IT infrastructure and systems design ensuring all business requirements are addressed</p><p>Conduct requirement gathering sessions with all stakeholders, interpret the requirements to finalize the development of RFPs related to IT infrastructure and systems, and contribute in the evaluation and selection of vendors based on set criteria in cooperation with relevant functions</p><p>Receive change requests related to IT infrastructure and systems, conduct proper analysis and prioritization of the received change requests, provide recommendations and set schedule for implementation in cooperation with relevant functions</p><p>Collect needed inputs to conduct IT risks assessment and analysis that could occur through the introduction of new technology and accordingly collaborate with IT Infrastructure &amp; Networks Planning &amp; Monitoring to develop the needed risk mitigation plan</p><p>Receive periodical reports on the actual performance of ZATCA IT Infrastructure and systems against set of KPIs, analyze the performance reports, and provide recommendations to improve the IT infrastructure and systems performance</p><p>Organization and Operations</p><p>Follow all relevant policies, processes and standard operating procedures so that work is carried out in a controlled and consistent manner</p><p>Help in solving escalated problems and provide needed support for junior team to ensure work is carried out in an efficient manner</p><p>Escalate complex problems to the relevant person to ensure cases/issues are closed properly</p><p>Perform other duties as requested</p><p>People Management</p><p>Train junior staff on the different job activities to ensure transfer of know-how, when applicable</p><p>Provide clear direction, prioritize tasks, assign and delegate responsibility, and monitor the workflow of subordinates/ junior staff</p><p>Support junior staff or direct reports in order to execute their duties according to set policies and processes</p><p>Communication and Contacs</p><p><strong>Desired Candidate Profile</strong></p><h2>Education</h2><p>Bachelor s degree in Computer Science, Information Technology, or equivalent is required</p><p>Master s degree in Information Technology, Computer Science, Business Administration, or equivalent is preferred</p><h2>Experience</h2><p>A minimum of 5 years of relevant experience</p><h2>Competencies</h2><ul><li>IT Compliance - Proficient</li><li>Infrastructure Management - Advanced</li><li>Project Management - Proficient</li><li>Vendor Management - Proficient</li><li>IT Change Management - Advanced</li><li>IT Systems Management - Advanced</li><li>Professionalism - Proficient</li><li>Collaboration and Communication - Developing</li><li>Results Oriented - Proficient</li><li>Customer Focus - Proficient</li><li>Enablement of Change and Innovation - Developing</li></ul>

<h3 >About the Role</h3> <p >stc is seeking an Organization &amp; Job Design Assistant Manager to join its team. This full-time role focuses on ensuring effective HR services by participating in the design and supervising the implementation of various HR projects and organizational development initiatives. The Assistant Manager will also be responsible for reviewing key operational human resource metrics and undertaking improvement initiatives.</p> <h3 >Key Responsibilities</h3> <ul > <li >Develop, implement, and maintain compensation and benefits products, including salary structure, benefits strategy, and incentives, in line with the rewards strategy.</li> <li >Conduct salary surveys and analyze results to ensure stc’s remuneration structure is competitive and aligned with market rates and company philosophy.</li> <li >Articulate various Organization Design interventions aligned to changing business needs.</li> <li >Ensure organizational structure, operating model, job descriptions, job evaluation, and enactment methodologies, processes, systems, and principles are aligned with business goals.</li> <li >Implement sector strategy, policies, and procedures for Workforce Planning by analyzing existing and future business needs and identifying insourcing and outsourcing options.</li> <li >Propose operating standards and procedures to monitor and control manpower utilization/optimization across all sectors, ensuring outputs align with approved internal measures.</li> <li >Develop and implement Performance Management policies, procedures, and systems to ensure a fair process for rewarding performance.</li> <li >Support businesses in developing KRAs and KPIs in alignment with approved business plans and Performance Management guidelines.</li> <li >Support the complete Performance Management cycle, including Goal Setting, Mid-Year, and Annual Assessment processes, and drive continuous performance feedback.</li> <li >Adopt an investment-based service approach focusing on compensation, development, opportunities, retention, engagement, and human capital planning to maximize economic value.</li> <li >Work closely with business leaders and line management, providing expert guidance on complex HR matters.</li> <li >Serve as a partner to management on human resources-related issues and act as an employee champion and change agent.</li> <li >Articulate strategies for various Human Resources activities in compliance with the overall HR strategy.</li> <li >Ensure appropriate organizational culture or change programs are in compliance with stc’s corporate objectives.</li> <li >Manage large-scale HR and Organization Development projects and initiatives under the guidance of the reporting senior.</li> </ul> <h3 >Qualifications and Experience</h3> <ul > <li >A minimum of 6-8 years of experience in human resources and organization development.</li> <li >Prior experience in the technology or telecommunication industry is preferred.</li> </ul> <h3 >Work Type</h3> <p >This is a full-time position.</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span> <span> </span></span><p><span><span><span>Advanced Metal Industries and Toho Titanium (ATTM), is a private company operating within the materials sector focusing on specialty chemicals.</span></span></span></p><br> <p><span>An exciting opportunity is available in AMICTOHO TITANIUM METAL Company for Engineer I, Maint Elect Design in Yanbu.</span></p><br> <p><strong><em><u><span>About the role:</span></u></em></strong></p><br> <p><span>Carries out complex electrical maintenance services on major plants and equipment. Practical, applied and highly authoritative knowledge of specialized methods and processes.</span></p><br> <p><strong><em><u><span>You will be responsible for:</span></u></em></strong></p><br> <ul> <li><span>Develop procedures, PM, fault reports. etc. in order to keep the optimum capabilities of the Electrical activities and equipment<span>.</span></span></li> <li><span>Fault finding/diagnosis of critical and complex electrical equipment in a timely manner, rectifying with optimal solution.</span></li> <li><span>Provides input into department and functional policies and procedures in line with the company objectives<span>.</span></span></li> <li><span>Maintains high HSE standards and seeks to ensure a healthy, safe work environment and working practices at all times<span>.</span></span></li> <li><span>Participates in the root cause analysis in coordination with inspection and reliability for repeated failures or rework cases.</span></li> <li><span>Reviews material reservations/requisitions/adequacy with respective functions for all types of electrical maintenance.</span></li> <li><span>Provides coaching, guidance, training and support for team members to ensure development of the necessary skills<span>.</span></span></li> <li><span>Supports the execution of routine and preventative Electrical maintenance of equipment to ensure availability is achieved.</span></li> <li><span>Installs, commissions, modifies, suggests design changes to electrical system and equipment according to company requirements.</span></li> </ul> <p><strong><span>Minimum Qualification:</span></strong></p><br> <ul> <li><span>Bachelor’s degree in electrical engineering.</span></li> </ul> <p><strong><span>Minimum Experience:</span></strong></p><br> <ul> <li><span>Minimum of 1-year experience</span></li> </ul> <p><strong><span>Knowledge &amp; Skills Required:</span></strong></p><br> <ul> <li><span>Knowledge of electrical systems, motors, transformers, PLCs, and drives.</span></li> <li><span>Maintenance planning and execution.</span></li> <li><span>Root cause analysis and troubleshooting skills.</span></li> <li><span>Safety standards and industrial codes.</span></li> <li><span>Ability to read and interpret electrical drawings and schematics.</span></li> <li><span>Familiarity with SAP.</span></li> <li><span>Fluency in English language with excellent communication (written &amp; oral) skills.</span></li> <li><span>Knowledge of MS Office applications (Word, Excel, Outlook, etc.)</span></li> </ul> <p><strong><span>Applicants Request Duration:</span></strong></p><br> <ul> <li><span>Start 10&nbsp;Aug&nbsp;2026</span></li> <li><span>Start 10&nbsp;Sep&nbsp;2026</span></li> </ul> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> No experience required </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

<h3 >About KBR Saudi Arabia</h3> <p >KBR Saudi Arabia is seeking a highly skilled <strong >Sr. Rotating Equipment Engineer</strong> specializing in Design &amp; Construction to join their team in Yanbu. This full-time position offers an opportunity to contribute to significant projects within a leading global company known for its engineering and technology solutions.</p> <h3 >The Role of Sr. Rotating Equipment Engineer</h3> <p >Under general supervision, the Sr. Rotating Equipment Engineer independently applies advanced engineering techniques to address complex challenges. This role involves making critical decisions on engineering problems and methods, ensuring optimal project outcomes. The engineer will also represent the organization in key forums, engaging with external engineers and officials to resolve important questions and negotiate effectively.</p> <h3 >Key Responsibilities</h3> <ul > <li >Independently apply advanced engineering techniques and methodologies.</li> <li >Make informed decisions regarding engineering problems and proposed methods.</li> <li >Represent the organization in conferences to resolve significant technical questions.</li> <li >Engage in negotiations with key engineers and officials from other organizations.</li> <li >Manage measurable assets, including assigned staff and project budgets.</li> <li >Provide technical guidance and mentorship to designers and less experienced engineers.</li> <li >Serve as a trusted consultant, with associates and others relying heavily on scientific interpretations and advice.</li> </ul> <h3 >Required Experience and Expertise</h3> <p >Candidates for this role should possess <strong >5 to 10 years of relevant experience</strong> in rotating equipment engineering, particularly within design and construction contexts. A proven ability to apply advanced engineering principles and make independent technical decisions is essential. The role requires strong communication and negotiation skills for external representation, alongside the capacity to provide effective technical guidance internally.</p> <h3 >Work Environment and Commitment</h3> <p >This is a <strong >full-time position</strong> based in <strong >Yanbu</strong>, Saudi Arabia. The successful candidate will operate in an environment where scientific interpretations and advice are highly valued, contributing to critical projects and providing leadership through technical expertise.</p> <h3 >Application Process</h3> <p >Interested candidates who meet the specified requirements are encouraged to apply. Salary for this position will be discussed during the interview process.</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><span>Airbus is committed to providing reasonable accommodations as an Equal Opportunity Employer to applicants with disabilities. If you require assistance or an accommodation to complete your application, please contact us at USCareers@airbus.com</span></p><br><br><br><ul><li>Notice: Know Your Rights: Workplace Discrimination is Illegal</li><li>Notice: Pay Transparency Nondiscrimination (English)</li><li>Aviso: Transparencia en el Pago No Discriminación&nbsp;(Spanish)</li></ul><br><br><p><span><b><b>Job Description:</b></b></span></p><br><br><p>The<b> Cabin </b><b>Design Engineer</b> <b>(Contract)</b> supports the development and customization of aircraft cabin and cargo interiors for airline customers. Duties include performing engineering design, analysis and integration of aircraft interior components from initial conceptual phase to final product installation, and providing engineering support to airline customers in the operation of the aircraft.&nbsp;</p><br><br><br><p><b>Meet the team:</b></p><br><br><p>Our Engineers have the privilege of working on complex, highly engineered machines and are involved at all stages of the aircraft life cycle, from product development to manufacturing and direct support to our airline customers. If you’re interested in designing, creating, and testing the present and future of Airbus products across the globe, join our mission to connect the world.</p><br><br><br><p><b>Your working environment:</b></p><br><br><p>The Engineering Center in Mobile, Alabama houses hundreds of Airbus engineers who assist in the design and development of Airbus commercial aircraft cabins, including aftermarket upgrades, reconfigurations and services of all product types across the globe.</p><br><br><br><p><b>Your challenges:</b></p><br><br><ul><li><p>Autonomously perform routine to moderate levels of design solution development.&nbsp;</p><br><br></li><li><p>Team assignments may include detailed part design, layout maturation, trade study analysis, certification activity, or in-service support.</p><br><br></li><li><p>Create or modify technical documents within various Airbus computer based applications with high quality and efficiency.</p><br><br></li><li><p>Collaborate with appropriate Airbus departments to develop optimum solutions. Perform functional and technical tasks with general direction.</p><br><br></li><li><p>Create and deliver technical documents and presentations with limited direction.</p><br><br></li><li><p>Accept broad objectives with agreed deadlines, but establish the tasks required and how they should be completed. Capable of working independently.</p><br><br></li></ul><br><p><b>Your boarding pass:</b></p><br><br><ul><li><p>Minimum BS degree in engineering or related field:&nbsp;</p><br><br></li><li><p>6+ years of experience within the design of cabin and cargo equipment and/or system installation projects.</p><br><br></li><li><p>Excellent communication and negotiation skills.&nbsp;</p><br><br></li><li><p>Ability to work effectively in a fast-paced and dynamic environment.&nbsp;</p><br><br></li><li><p>Ability to understand and mentor principles within assigned discipline.&nbsp;</p><br><br></li><li><p>Ability to interpret an extensive variety of technical aircraft topics.&nbsp;</p><br><br></li><li><p>Ability to inter-relate with and motivate diverse teams.</p><br><br></li><li><p>Authorized to work in the US.</p><br><br></li></ul><br><p><b>Physical Requirements:&nbsp;</b></p><br><br><ul><li><p>Onsite or remote: Onsite 100%&nbsp;</p><br><br></li><li><p>Vision: able to see and read computer screens and other electronic equipment with screens, able to read documents, reports and engineering drawings.</p><br><br></li><li><p>Hearing: able to participate in conversations in person and via teleconference or phone and to hear sounds on the production floor including safety warnings or alarms.&nbsp;</p><br><br></li><li><p>Speaking: able to speak in conversations and meetings, deliver information and participate in communications.&nbsp;</p><br><br></li><li><p>Equipment Operation (personal computer, telephone, copies, fax machine, and related office equipment and using electronic identification card to enter building floors and internal doors): able to operate most office and personal electronic equipment and some tools including production tools such as hydraulic lifts.</p><br><br></li><li><p>Carrying: able to carry documents, tools, drawings, electronic equipment up to 30lbs/14kgs.&nbsp;</p><br><br></li><li><p>Lifting: able to lift documents, tools, drawings, electronic equipment up to 30lbs/14kgs.</p><br><br></li><li><p>Pushing / Pulling: able to push and pull small office furniture and some equipment and tools.</p><br><br></li><li><p>Sitting: able to sit for long periods of time in meetings, working on the computer.&nbsp;</p><br><br></li><li><p>Squatting / Kneeling: able to squat or kneel to retrieve or replace items stored on low shelving.</p><br><br></li><li><p>Standing: able to stand for discussions in offices or on the production floor.&nbsp;</p><br><br></li><li><p>Travel: able to travel independently and at short notice.</p><br><br></li><li><p>Walking (include routine walking such as to a shared printer to retrieve documents): able to walk through office and production areas including uneven surfaces.</p><br><br></li></ul><br><br><p><b>This position is a temporary (contract) position with no specific time period but could be extended or shortened as needed. Contractors are employed by a 3rd party vendor and placed on assignment to Airbus.&nbsp;</b></p><br><br><br><p>This job requires an awareness of any potential compliance risks and a commitment to act with integrity, as the foundation for the Company’s success, reputation and sustainable growth.</p><br><br><br><p><span><b><b><b><b>Company:</b></b></b></b></span></p><br><br>Airbus Americas, Inc.<br><p><b>Employment Type:</b></p><br><br>Agency / Temporary<br><p><b>Experience Level:</b></p><br><br>Professional<br><p><b>Remote Type:</b></p><br><br>On-site<br><p><b>Job Family:</b></p><br><br>Stdized Platform, Module &amp; Version Eng. &lt;JF-EN-EL&gt;<p>------</p><br><br><p>------</p><br><br>Airbus provides equal opportunities to all individuals seeking assignment with Airbus without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetics, pregnancy, marital status, veteran status or other legally protected status. In addition to federal law requirements, Airbus complies with applicable state and local laws governing nondiscrimination in every location in which the company has facilities. Airbus expressly prohibits any form of workplace harassment based on race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetics, pregnancy, marital status, veteran status or other legally protected status. This assignment description does not constitute a written or implied contract of employment.<br><p>By submitting your CV or application you are consenting to Airbus using and storing information about you for monitoring purposes relating to your application or future employment. This information will only be used by Airbus.<br>Airbus is committed to achieving workforce diversity and creating an inclusive working environment. We welcome all applications irrespective of social and cultural background, age, gender, disability, sexual orientation or religious belief.</p><br><br><p><span>Airbus is, and always has been, committed to equal opportunities for all. As such, we will never ask for any type of monetary exchange in the frame of a recruitment process. Any impersonation of Airbus to do so should be reported to&nbsp;</span><span>emsom@airbus.com.</span></p><br><br><br> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> No experience required </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>