وظائف مهندس تسعير مناقصات في السعودية

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>WSP in the Middle East are seeking a Principal Mechanical Engineer to lead design and delivery of complex aviation and industrial buildings aircraft maintenance hangars, corrosion control/paint shops, engine/APU workshops, and large-scale flight catering facilities. You ll be the mechanical technical authority across HVAC and specialist process systems (compressed air, ventilation for painting and welding, process cooling/heating, kitchen/cold-chain ventilation &amp; refrigeration interfaces), driving concept-to-IFC outcomes that meet stringent safety, hygiene and performance standards.</p><p>Lead mechanical/HVAC design from feasibility and basis-of-design (BoD) through detailed design, tender and construction support for aviation facilities. Own the environmental strategy for very large volumes (e.g., hangar bays): heating/cooling concepts, destratification, purge/exhaust modes, make-up air, and controls sequences balancing energy, IAQ and safety. (UFC/ASHRAE/NFPA context). Engineer specialist ventilation for hazardous operations: paint spray booths/rooms, fuel-cell maintenance/purge ventilation, welding/fume extraction, VOC control, and hazardous-area interfaces with electrical/controls. Design and specify compressed air systems (instrument/process/breathing air): generation, drying, filtration, storage, distribution, point-of-use regulation, monitoring and quality classes (ISO 8573). Integrate process utilities common to MRO and workshops vacuum, nitrogen, process cooling water, oil/water separation interfaces, and condensate management coordinating with fire/life safety and electrical. Shape catering facility HVAC and hygienic air zones: kitchen exhaust &amp; makeup air (NFPA 96), pressure cascades, temperature/humidity control for clean prep/packing, and cold-chain room interface with refrigeration and HACCP/ISO 22000 programs. Deliver BIM-led coordination (Revit/Navisworks) across architecture, structures, process, fire protection, and controls; lead clash resolution and model QA. Run calculations &amp; simulations: loads, duct/pipe sizing, ventilation rates, smoke/fume capture, and (where needed) CFD to support the thermal comfort studies. Author technical documents: BoD, design reports, specifications, sequences of operation, control narratives, FAT/SAT/commissioning plans. Mentor and review the work of engineers/designers; lead design reviews, HAZOPs, and constructability/operability workshops. Engage stakeholders airlines/MROs, airport operators, food safety teams, and authorities to secure approvals and smooth delivery. Lead retrofit, refurbishment, and brownfield upgrade projects within operational airport environments assessing existing systems, developing phased upgrade strategies, ensuring minimal disruption to ongoing operations, and integrating new systems with legacy infrastructure while addressing capacity, compliance, and energy performance improvements.</p><p>Key systems &amp; domains you ll cover Hangars &amp; workshops: general and emergency exhaust, purge ventilation for fuel system work, floor-level capture where required, destratification/HVLS fans, door air management, radiant/air systems, PCA (pre-conditioned air) and GSE interfaces. Paint/corrosion control: booth/room supply &amp; exhaust, filtration, interlocks, LEL sensing, VOC abatement interfaces, hazardous-area zoning/ATEX/IECEx coordination with electrical teams. Welding &amp; fabrication: local exhaust ventilation (LEV), fume extraction arms/hoods, booth/backdraft design, and general dilution ventilation aligned with OSHA/ACGIH guidance. Compressed air: oil-free/oil-lubricated selection, dryers (refrigerated/desiccant), filtration trains to meet ISO 8573 purity classes for tools/processes; breathing-air systems to OSHA Grade D (CGA G-7.1) when required. Catering facilities: high-duty kitchen exhaust &amp; makeup air (hoods, MAUs, heat recovery), grease ducting, rooftop terminations, pressure zoning for hygiene, and interfaces to cold rooms/freezers and clean areas aligned to HACCP/ISO 22000.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Bachelor's or Master's degree in Mechanical Engineering.</li><li>Professional registration (e.g., CEng/PE) strongly preferred.</li><li>15+ years experience in building services (mechanical/HVAC), with significant aviation/industrial project delivery (hangars, MRO shops, paint/corrosion control, flight catering, or similar).</li><li>Proven leadership as Lead/Principal Engineer on multi-disciplinary design projects.</li><li>Deep knowledge of codes/standards typically applied on aviation assets such as Aircraft Maintenance Hangars and Corrosion Control &amp; Paint Facilities. NFPA 409 (aircraft hangars), NFPA 33 (spray application), NFPA 96 (commercial cooking/kitchen exhaust). ASHRAE 62.1 (ventilation/IAQ), with familiarity in 90.1/energy implications. ISO 8573 for compressed air quality; OSHA 1PHONE_NUMBER / CGA G-7.1 Grade D where breathing-air is part of scope.</li><li>Expertise writing BoDs, specifications, P&amp;IDs, control sequences, etc.</li><li>BIM fluency: Revit, Navisworks; competence with calculations (e.g., IES-VE/HAP/eQuest), and airflow network tools; CFD exposure preferred.</li><li>Client-facing communication and team leadership; mentoring and QA/QC across multiple concurrent packages.</li><li>Strong communication skills for effective client presentations, stakeholder workshops, and cross-functional coordination.</li><li>Willingness to be based at Dammam Airport for the initial phase of the project (short-term assignment) and relocate to the main office upon project completion</li></ul><p><strong>Nice to Have</strong></p><ul><li>Prior delivery in live airport environments (airside/landside interfaces, works phasing).</li><li>Experience with PCA/GPU integration and hangar door infiltration strategies.</li><li>Familiarity with food-safe HVAC zoning and cleanroom-adjacent spaces in food processing.</li></ul><p></p></section>

<section><p class="heading jdMain">وصف الوظيفة</p><p class="heading">الأدوار والمسؤوليات</p><div class="paragraph"><p>الشركة : أرامكو السعودية (ASC)<br>المهارات : مهندس تحت سطح البحر , هندسة تحت سطح البحر<br>الخبرة : 7+ سنوات<br>التعليم : درجة البكالوريوس/3-5 سنوات<br>الموقع : المملكة العربية السعودية</p><p>أرامكو تنشط الاقتصاد العالمي. تحتل أرامكو موقعاً متميزاً في صناعة الطاقة العالمية. نحن من أكبر منتجي الطاقة الهيدروكربونية والكيماويات في العالم، مع من بين أقل كثافات الكربون في أنشطة الانتاج العليا لأي منتج رئيسي. مع استثماراتنا الكبيرة في التكنولوجيا والبنى التحتية، نسعى لتعظيم قيمة الطاقة التي ننتجها للعالم إلى جانب التزامنا لتعزيز قيمة أرامكو للمجتمع. يقع مقرنا في المملكة العربية السعودية، ومع وجود مكاتب حول العالم، نجمع بين انضباط السوق ورؤية تمتد لجيل من المستقبل، مستمدة من خبرتنا التي امتدت لتسعة عقود كأمناء مسؤولين لموار المملكة الهيدروكارونية الضخمة. أدت هذه المسؤولية إلى توفير فوائد اجتماعية واقتصادية كبيرة ليس فقط للمملكة، بل أيضًا لعدد هائل من المجتمعات والاقتصادات والدول التي تعتمد على الطاقة الحيوية والموثوقة التي نوفرها. نحن من الشركات الأكثر ربحية في العالم، فضلاً عن كوننا من بين أعلى خمس شركات عالمياً من حيث القيمة السوقية.</p><p>نظرة عامة<br>نحن نبحث عن مهندس تحت سطح البحر للانضمام إلى قسم عمليات البحريّة لدينا. قسم عمليات البحرية مسؤول عن قيادة التخطيط والهندسة وتسليم المهام الفرعية الرئيسية لضمان عمليات سفن آمنة وفعّالة. دورك الأساسي هو تقديم خدمات تحت سطح البحر للعملاء خارج الشاطئ، مثل الغوص وعمليات المركبة المُعَالة عن بعد (ROV)، مثل عمليات تفتيش تحت الماء، الإصلاحات، الصيانة والبناء. أيضًا، ستقدم خبرة تقنية متقدمة ودعم في حل القضايا التقنية المعقدة المتعلقة بعمليات تحت سطح البحر.</p><p>المهام والمسؤوليات<br>بصفتك المرشح الناجح، ستطلب منك القيام بما يلي:<br>توفير واجهة رئيسية بين عمليات الغوص والعملاء عند تطوير الإجراءات التفصيلية وقوائم المعدات وأي متطلبات ذات صلة.<br>قيادة التخطيط على اليابسة وتنفيذ عمليات تحت سطح البحر في البحر.<br>العمل كنقطة محورية لجميع مراجعات نطاق العمل (SOW)، ومراجعة التصميم والامتثال الهندسي لأرامكو السعودية.<br>التأكد من أن جميع أعمال تحت سطح البحر في الامتثال الكامل لدليل عمليات البحرية الخاص بأرامكو السعودية والمستندات الإرشادية البحرية المعترف بها داخلياً.<br>أداء دور مندوب موقع العميل في البحر عند الضرورة، مع ضمان تزويد المقاول بالتدخل بالمعلومات الصحيحة للموقع وأن الموقع آمن للاستخدام عبر تحديد المخاطر المعروفة.<br>تقديم مدخلات تقنية لأي مشاريع تطوير، وتوفير إرشاد وظيفي للمقاولين الهندسيين حول مسائل تخصصية لضمان أن جودة العمل تتوافق مع معايير أرامكو وبطريقة زمنية وتكلفة فعّالة.<br>العمل كنقطة اتصال تقنية لشركة أرامكو السعودية لجميع عقود مشاريع تحت سطح البحر.<br>تقديم مدخلات تقنية لأي مشاريع تفكيك أو مشاريع جديدة عند الضرورة.</p><p>المتطلبات الدنيا<br>شهادة البكالوريوس في الهندسة المدنية أو الميكانيكية أو البحرية. يفضل درجة الماجستير في الهندسة تحت سطح البحر أو هندسة الأنابيب.<br>هناك خبرة لا تقل عن 7 سنوات في أدوار هندسة تحت سطح البحر في صناعة النفط والغاز<br>يفضل أن تكون لديك مهنية مهنية مع جهة هندسية معترف بها دولياً.<br>ستتمكن أساساً من العمل لدى مقاول رئيسي تحت سطح البحر يتولى عمليات تفتيش، الإصلاحات، الصيانة والبناء تحت الماء.<br>يجب أن تمتلك خبرة بحرية واسعة، وتنفذ عمليات تحت سطح البحر في دور قيادي أو كمهندس ميداني.<br>ستكون لديك خبرة في متطلبات الهيئات البحرية التنظيمية الدولية ومعايير التصنيف وممارسات الهندسة البحرية وممارسات الهندسة تحت سطح البحر والتقنيات تحت الماء والكودات والمواصفات.<br>يجب أن تتمتع بمهارات اتصال ممتازة والقدرة على بناء علاقات قوية والعمل بفاعلية ضمن فريق.<br>ستتمتع بمهارات ممتازة في تطبيقات Microsoft Office.</p><p>مكان العمل والجدول الزمني<br>مكان العمل: داخل المملكة العربية السعودية - سيحدد في عرض العمل<br>الجدول: دوام كامل - سيحدد في عرض العمل</p><p>مدة نشر الوظيفة<br>تاريخ بدء النشر: 29/06/2026<br>تاريخ انتهاء النشر: 31/12/2026</p><p>بيئة العمل<br>يُجذَب موظفونا أصحاب الأداء العالي إلى الفرص المهنية والفنية والصناعية التحدية والمجزية التي نقدمها، ويتم تعويضهم وفقاً لذلك. في أرامكو، يعمل فريقنا على مشاريع على مستوى العالم حقًا، مدعومين باستثمار في رأس المال والتكنولوجيا يفوق الوصف. وبما أننا شركة طاقة عالمية، فنحن نواجه تحديات تقنية ولوجستية وبيئية كبيرة في العالم؛ لذا نستثمر بشكل كبير في تطوير المواهب. لدينا تاريخ فخور في تعليم وتدريب قوى العمل لدينا على مدى عدة عقود. يتم تشجيع الموظفين على جميع المستويات على تحسين معرفتهم وكفاءاتهم المتخصصة في قطاعهم من خلال برامج تطوير القوى العاملة - أحد أكبرها في العالم.</p></div></section><section><p class="heading">الملف الشخصي المرغوب فيه للمرشح</p><p class="paragraph"></p><p>سيكون لديك درجة البكالوريوس في الهندسة المدنية أو الميكانيكية أو البحرية. يفضل درجة الماجستير في الهندسة تحت سطح البحر أو هندسة الأنابيب.<br>ستكون لديك خبرة لا تقل عن 7 سنوات في أدوار هندسة تحت سطح البحر في صناعة النفط والغاز<br>يفضل وجود مهنية محترفة مع جهة هندسية معترف بها دولياً.<br>ستتمكن أساساً من العمل لدى مقاول رئيسي تحت سطح البحر يقوم بعمليات تفتيش، إصلاحات، صيانة وبناء تحت الماء.<br>يجب أن تمتلك خبرة بحرية كبيرة، وتقديم عمليات تحت سطح البحر في دور قيادي أو مهندس ميداني.<br>ستكون لديك خبرة في متطلبات الهيئات البحرية الدولية ومعايير التصنيف وممارسات الهندسة البحرية وممارسات الهندسة تحت سطح البحر والتقنيات تحت الماء والكودات والمواصفات.<br>يجب أن تتمتع بمهارات اتصال ممتازة والقدرة على بناء علاقات قوية والعمل كفريق.<br>ستتمتع بمهارات ممتازة في تطبيقات مايكروسوفت أوفيس.</p><p></p></section>

As a Senior Application Engineer, you will be responsible for implementing and configuring our software solutions for clients, ensuring seamless integration, and providing ongoing support. You will work closely with clients to understand their needs, deliver technical expertise, and contribute to project success.<br>Key Responsibilities Implementation & Configuration: Responsible for the deployment and configuration of software solutions, tailoring them to meet client requirements. Integration: Collaborate with clients to ensure smooth integration with existing systems and workflows. Technical Support: Provide troubleshooting and technical support during and after implementation, addressing client issues promptly. Training & Documentation: Conduct training sessions for clients and create comprehensive documentation to facilitate effective software use. Project Collaboration: Work closely with project managers and other team members to ensure timely and successful project delivery. Feedback Loop: Collect and relay client feedback to product management to inform future product development.<br>Qualifications Education: Bachelor’s degree in computer science, Engineering, or a related field. Technical Skills: Strong understanding of software development, integration processes, and relevant technologies. Problem-Solving: Excellent analytical and troubleshooting skills with the ability to address complex technical challenges. Communication: Strong verbal and written communication skills, with the ability to convey technical information to non-technical stakeholders.<br>Technical Capabilities Requirements:Solid understanding of the technology stack for Java-based applications Proficient in deploying applications on enterprise application servers Experienced in configuring database connection parameters (connection string, pool, security...) Skilled in writing SQL queries for troubleshooting and data validation Strong analytical skills in reviewing application log files and system records to diagnose and resolve issues Good working knowledge of Windows and Linux environments for application support and system configuration

As an Application Engineer, you will be responsible for implementing and configuring our software solutions for clients, ensuring seamless integration, and providing ongoing support. You will work closely with clients to understand their needs, deliver technical expertise, and contribute to project success.<br>Key Responsibilities Implementation & Configuration: Responsible for the deployment and configuration of software solutions, tailoring them to meet client requirements. Integration: Collaborate with clients to ensure smooth integration with existing systems and workflows. Technical Support: Provide troubleshooting and technical support during and after implementation, addressing client issues promptly. Training & Documentation: Conduct training sessions for clients and create comprehensive documentation to facilitate effective software use. Project Collaboration: Work closely with project managers and other team members to ensure timely and successful project delivery. Feedback Loop: Collect and relay client feedback to product management to inform future product development.<br>Qualifications Education: Bachelor’s degree in computer science, Engineering, or a related field. Technical Skills: Strong understanding of software development, integration processes, and relevant technologies. Problem-Solving: Excellent analytical and troubleshooting skills with the ability to address complex technical challenges. Communication: Strong verbal and written communication skills, with the ability to convey technical information to non-technical stakeholders.<br>Technical Capabilities Requirements:Solid understanding of the technology stack for Java-based applications Proficient in deploying applications on enterprise application servers Experienced in configuring database connection parameters (connection string, pool, security...) Skilled in writing SQL queries for troubleshooting and data validation Strong analytical skills in reviewing application log files and system records to diagnose and resolve issues Good working knowledge of Windows and Linux environments for application support and system configuration

About Us<br>Since 1974, S. K. M Air Conditioning LLC has been a leading manufacturer of HVAC equipment across the Middle East and beyond. With 2,000+ employees representing 30+ nationalities, we deliver innovative, reliable, and energy-efficient solutions across 30+ global markets.<br>Role Overview<br>We are looking for a Service Engineer – HVAC (After Sales) to join our After Sales team. This role is responsible for troubleshooting, warranty handling, and customer support, ensuring SKM systems consistently perform at the highest standards.<br>Key Responsibilities<br>???? Handle warranty and service complaints, ensuring resolution within set KPIs.???? Troubleshoot HVAC equipment (chillers, AHUs, DX systems, package units).???? Conduct root cause analysis of failures and prepare service reports.???? Support retrofit, repair, and maintenance activities.???? Supervise technicians on-site, ensuring safety and quality compliance.???? Provide technical feedback to engineering and quality teams.???? Assist in customer training and prepare technical documentation.<br>What We’re Looking For<br>✅ Bachelor’s degree in Mechanical Engineering (or 5–7 years HVAC service experience).✅ 5+ years’ experience in installation, operation, maintenance, and service of HVAC systems.✅ GCC experience preferred (HVAC service, MEP, or FM).✅ Strong troubleshooting, technical, and customer service skills.✅ Good communication skills in English (Arabic/Hindi/Urdu is an advantage).✅ Knowledge of mechanical/electrical controls (analog & microprocessor-based).<br>Why Join SKM?<br>???? Be part of one of the region’s leading HVAC manufacturers.???? Collaborative and multicultural work environment.???? Opportunities to grow your career and expand your technical expertise.???? Drive meaningful work in after sales service and customer satisfaction.<br>???? Apply Now to be part of SKM and make a difference in HVAC after sales excellence!

MHE Engineer<br>Location: Riyadh, Saudi Arabia Department: Engineering / MHE<br>About the Role We are looking for an experienced MHE Engineer to oversee the maintenance, troubleshooting, and performance of Material Handling Equipment and systems. The ideal candidate should have strong technical knowledge and experience in maintaining MHE systems in industrial, warehouse, logistics, or similar environments.<br>Key Responsibilities Oversee preventive and corrective maintenance of MHE systems. Diagnose and resolve mechanical, electrical, hydraulic, and control-system issues. Monitor equipment performance and identify opportunities to improve reliability. Coordinate with technicians and operations teams for maintenance activities. Support installation, commissioning, repair, and modification of MHE systems. Review technical drawings, manuals, and equipment documentation. Maintain maintenance records, reports, and equipment history. Ensure compliance with safety procedures and engineering standards. Minimize equipment downtime and support continuous improvement initiatives.<br>Requirements Bachelor's degree or Diploma in Mechanical, Electrical, Mechatronics, or a related engineering field. Minimum 3-5 years of experience in MHE, warehouse automation, logistics, or industrial equipment. Strong knowledge of conveyors, forklifts, automated material handling systems, and related equipment. Experience in troubleshooting mechanical and electrical systems. Knowledge of PLC, VFD, sensors, and control systems is an advantage. Strong analytical, problem-solving, and communication skills. Transferable Iqama is mandatory. Good knowledge of safety and maintenance practices. Ability to coordinate with technical and operations teams. Immediate availability is preferred.<br>What We Offer Competitive salary based on experience and qualifications. Professional growth and career development opportunities. Supportive and dynamic work environment. Benefits as per company policy and Saudi Labor Law.<br>Apply Now Interested candidates can send their updated CV to:hr@unitedintls.com

Job Summary We are seeking a motivated and technically skilled IBM File Net P8 Administrator / ECM Support Engineer with 2–3 years of experience in IBM Enterprise Content Management technologies. The ideal candidate should have hands-on experience with IBM File Net P8, IBM Business Automation Workflow (BAW), IBM Web Sphere Application Server Network Deployment (ND), Linux administration, and Microsoft SQL Server. The candidate will be responsible for supporting, maintaining, troubleshooting, and administering ECM environments while ensuring high availability and performance. <br><br>Key Responsibilities:<br>1. Administer and support IBM File Net P8 Content Platform Engine (CPE) and related components. 2. Install, configure, and maintain IBM Content Navigator (ICN) and File Net services. 3. Support IBM Business Automation Workflow (BAW) environments and assist in deployment activities. 4. Deploy and manage enterprise applications on IBM Web Sphere Application Server ND. 5. Monitor application health, troubleshoot production issues, and perform root cause analysis. 6. Configure and maintain Linux servers hosting File Net and Web Sphere environments. 7. Manage Microsoft SQL Server databases related to File Net and BAW applications. 8. Analyze application, Web Sphere, and File Net logs to identify and resolve issues. 9. Perform environment health checks and optimize system performance. 10. Coordinate with application development, infrastructure, database, and security teams during deployments and production support. 11. Participate in production support, incident management, and change management activities. <br><br>Technical Skill: IBM- BAW: BAW 24.0- IF009 IBM Websphere: WAS ND 9.0.27 IBM Content Navigator IBM Content Platform Engine: IBM Content Platform Engine 5.6 IBM CMIS : 3.7 Linux : RHEL OS MSSQL Server : 2022

We are looking for an experienced Electrical Testing Engineer to join our team. The ideal candidate will have strong hands-on experience in electrical testing, commissioning, inspection, and troubleshooting of electrical systems and equipment. Key Responsibilities:• Perform electrical testing, inspection, and commissioning activities for electrical systems and equipment.• Conduct testing of transformers, switchgear, circuit breakers, protection systems, CTs, PTs, and other electrical equipment.• Perform insulation resistance, continuity, earth resistance, transformer testing, and related electrical tests.• Carry out relay and protection system testing and verification.• Review electrical drawings, test procedures, and technical specifications.• Identify and troubleshoot electrical faults and testing issues.• Prepare detailed test reports, inspection reports, and technical documentation.• Ensure all testing activities comply with applicable international standards, safety requirements, and approved procedures.• Coordinate with project teams, clients, contractors, and other stakeholders during testing and commissioning activities.• Ensure testing equipment is properly calibrated and maintained.• Support site activities and provide technical recommendations when required. Requirements:• Bachelor’s degree in Electrical Engineering.• 4–6 years of relevant experience in electrical testing and commissioning.• Strong hands-on experience with electrical testing equipment and instruments.• Good knowledge of electrical protection systems and testing procedures.• Experience with LV, MV, and/or HV electrical systems is preferred.• Familiarity with relevant international standards such as IEC, IEEE, and NFPA.• Ability to read and interpret electrical drawings, single-line diagrams, and technical specifications.• Strong troubleshooting and analytical skills.• Good communication and reporting skills.• Willingness to travel to project sites when required. Preferred Certifications:• Electrical Testing & Commissioning certifications.• Protection Relay Testing certification.• Relevant safety certifications. Experience Level: 4–6 Years Employment Type: Full-time

JOB PURPOSETechnical Services Engineer produces specifications, designs, develops, technical configuration and technical assessment for new or modifiedcomponents or systems and manages and controls enterprise asset. Also, drives continuous improvement and develops the most appropriatemodels and engineering methods.<br>DUTIES & RESPONSIBILITIES1. Participates in analysis, development and evaluation of basic designs, engineering calculations, implementation plan and documentssupporting Khazeen work.2. Works on preparing studies and finding engineering solutions to increase efficiency and reduce operational cost.3. Approaches new technology specially in LPG industry.4. Works to develop the reliability of the equipment and monitors & controls the preventive maintenance plan on all the company's assets.5. Evaluates new systems and equipment based on approved requirements and standards.6. Reviews drawings and technical specifications of equipment and its materials.7. Contributes to the preparation of studies, designs, technical specifications, and estimated cost of engineering work.8. Evaluates and initiates technical testing of Khazeen new products.9. Develops 3D engineering designs and graphics using design software.10. Makes recommendations on adjusting and upgrading equipment according to business needs.11. Develops calibration procedures to comply with global standards for reliability and equipment availability.12. Provides technical support on new and existing equipment to the end user.13. Adheres to all safety and performance regulations.14. Performs other related duties or tasks assigned by line manager.<br>QUALIFICATIONS, EXPERIENCE & SKILLSQualifications · Bachelor’s degree in engineering Years of Experience · +3 years of experience. Competencies Core Competencies · Customer Focus · Interpersonal Sensitivity & Teamwork · Accountability & Professionalism · Commitment to Health & Safety · Learning & Innovation Competencies Core Competencies · Customer Focus · Interpersonal Sensitivity & Teamwork · Accountability & Professionalism · Commitment to Health & Safety · Learning & Innovation

JOB PURPOSESenior Mechanical Engineer produces specifications for, designing, developing, manufacturing, and installing new or modified mechanical componentsor systems with engineering design drawings and manages and control enterprise asset.<br>DUTIES & RESPONSIBILITIES1. Develops and prepares engineering designs from preliminary concepts, sketches, engineering calculations, specification sheets and otherdata.2. Measures the performance of mechanical components, devices, and engines.3. Participates and prepares SOW with project department.4. Reviews tenders' inquiries and monitors site progress report.5. Maintains and modifies equipment to ensure that it is safe, reliable, and efficient.6. Uses computer-aided design/modelling software.7. Follows with instruction manuals and technical drawings8. Strictly adhere to KHAZEEN safety and security regulations and take precautionary measures within the relevant scope of work.9. Ensures compliance with organizational policies, procedures, and quality standards in the Engineering & Planning Section.10. Keeps equipment operating in good condition by enforcing operating instructions, troubleshooting breakdowns, required preventivemaintenance, and calling for repairs11. Updates job knowledge by participating in educational opportunities and reading technical publications.12. Monitors and tracks project progress and writing up reports.13. Handles rezoning, site plans, special use permits, and related materials.14. Performs other duties and tasks assigned by line manager.<br>QUALIFICATIONS, EXPERIENCE & SKILLSQualifications · Bachelor’s Degree in Mechanical Engineering degree or equivalent Years of Experience · 5+ years of related experience in a similar industry or similar size company Competencies Core Competencies · Customer Focus · Interpersonal Sensitivity & Teamwork · Accountability & Professionalism · Commitment to Health & Safety · Learning & Innovation Technical Competencies · Safety Procedures and Regulations · Engineering knowledge · Maintenance and Reliability Engineering · LPG Systems Knowledge · Troubleshooting Skills · Attention to Details · Project Management Skills · Good Command over Arabic and Excellent in English Language · Problem-Solving Skills · Creativity · Interpersonal Skills · Verbal and Written Communication Skills · Commercial Awareness

About the Company<br><br>We are a leading engineering firm specializing in HVAC and Commissioning Qualification Validation (CQV) services. Our mission is to provide innovative solutions that enhance operational efficiency and ensure compliance with industry standards. We foster a collaborative culture that values diversity, creativity, and continuous improvement.<br><br>About the Role<br><br>The HVAC/CQV Engineer will play a crucial role in designing, implementing, and validating HVAC systems for various projects. This position requires a strong understanding of engineering principles and a commitment to delivering high-quality results.<br><br>Responsibilities<br><br>Design and implement HVAC systems in compliance with industry standards. Conduct commissioning and qualification activities for HVAC systems. Collaborate with project teams to ensure successful project delivery. Prepare and review documentation related to HVAC systems. Provide technical support and guidance to clients and team members.<br><br>Qualifications<br><br>Bachelor's degree in Mechanical Engineering or related field. Professional engineering license is preferred.<br><br>Required Skills<br><br>Strong knowledge of HVAC design and engineering principles. Experience with commissioning and qualification processes. Proficient in relevant software tools and applications. Excellent problem-solving and analytical skills.<br><br>Preferred Skills<br><br>Experience in the pharmaceutical or biotechnology industries. Familiarity with regulatory requirements and standards. Strong communication and interpersonal skills.<br><br>Pay range and compensation package<br><br>The salary for this position ranges from 4000SR, depending on experience and qualifications. We also offer a comprehensive benefits package, including health insurance, retirement plans, and professional development opportunities.<br><br>Equal Opportunity Statement<br>We are an equal opportunity employer and are committed to fostering an inclusive environment for all employees. We celebrate diversity and are dedicated to creating a workplace where everyone feels valued and respected.

About Systemair<br>Systemair is a global leader in ventilation and air conditioning solutions. We are looking for a talented QA/QC Engineer to join our manufacturing team and ensure the highest quality standards throughout the production of Air Handling Units (AHUs) and HVAC equipment.<br>Key Responsibilities Perform Incoming, In-Process, and Final Quality Inspections. Conduct Factory Acceptance Testing (FAT) for AHUs and HVAC equipment. Ensure compliance with customer specifications, engineering drawings, and applicable quality standards. Implement and maintain Quality Management System (QMS) documentation in accordance with ISO 9001, ISO 14001, and ISO 45001. Prepare inspection reports, test reports, NCRs, and quality documentation. Investigate quality issues and implement Corrective and Preventive Actions (CAPA). Work closely with Production, Engineering, Procurement, and Supply Chain teams to resolve quality concerns. Support internal and external quality audits. Promote continuous improvement initiatives across manufacturing operations.<br>Requirements Bachelor's degree in Mechanical Engineering, Industrial Engineering, or a related field.3–5 years of QA/QC experience in HVAC manufacturing. Experience with Air Handling Units (AHUs) is highly preferred. Strong knowledge of Factory Acceptance Testing (FAT), Incoming Inspection, In-Process Inspection, and Final Inspection. Good understanding of ISO 9001, ISO 14001, and ISO 45001 standards. Ability to interpret engineering drawings and technical specifications. Strong analytical and problem-solving skills. Good communication skills in English.<br>Preferred Qualifications Previous experience in an AHU manufacturing facility. Knowledge of HVAC testing procedures and international quality standards. If you are passionate about quality, manufacturing excellence, and continuous improvement, we would love to hear from you.<br>Apply now and become part of Systemair Saudi Arabia.

About Us:<br><br>SAMI Land Company is a specialized subsidiary of Saudi Arabian Military Industries (SAMI)—wholly owned by the Public Investment Fund (PIF)—focused on localizing and advancing Saudi Arabia’s land defense capabilities in line with Vision 2030’s goal to localize over 50% of military spending. Operating from the MENA region’s largest integrated defense facility, an 82,000 m² Industry 4.0 complex, the company specializes in the design, localized manufacturing, integration, and maintenance (MRO) of military land platforms, including armored vehicles, tactical trucks, artillery systems, and remote weapon stations to support the Saudi Armed Forces.<br><br><br>Job Purpose:<br>The Co-op Mechanical Engineer will support the Operations team in day-to-day manufacturing activities by assisting with production processes, equipment performance, process improvements, and operational efficiency while gaining practical engineering experience in an industrial environment.<br><br><br>Key Responsibilities:<br>* Support daily production and operational activities to ensure smooth workflow.<br>* Monitor production performance and identify opportunities for process improvement.<br>* Assist in troubleshooting production and equipment-related issues.<br>* Coordinate with Production, Maintenance, Quality, and Supply Chain teams to resolve operational challenges.<br>* Support implementation of continuous improvement initiatives (Lean Manufacturing / 5S).<br>* Assist in monitoring production KPIs and preparing operational reports.<br>* Prepare operational documentation, work instructions, and reports.<br>* Perform other duties assigned by the Operations Supervisor.<br><br><br><br>Qualifications:<br><br>* Pursuing a Bachelor’s degree in Mechanical Engineering.<br>* Currently enrolled in a co-op program with an official co-op letter from the university.<br>* Minimum GPA of 3.75/5.00 or 2.75/4.00.<br>* Must meet all university/program acceptance requirements for co-op placement.<br>* Basic understanding of manufacturing processes, mechanical systems, and engineering principles.<br>* Strong communication and organizational skills.<br>* Proficiency in Microsoft Office (Word, Excel, Power Point).

Position Overview We are seeking a proactive and technically skilled Application Support Engineer to join our team. The ideal candidate will have 3+ years of experience providing L1/L2 support for enterprise applications, ensuring the stability, performance, and availability of business-critical systems. This role requires strong troubleshooting capabilities across applications, databases, and APIs, along with a development background to support deployments, performance optimization, and continuous application improvement.<br>Responsibilities Provide L1/L2 support for enterprise applications by diagnosing and resolving incidents and service requests. Troubleshoot application, database, and API-related issues using SQL queries and monitoring tools. Monitor application health, investigate performance issues, and ensure high system availability. Manage incidents and service requests while ensuring compliance with defined SLAs. Collaborate with development, infrastructure, and database teams to resolve complex technical issues. Support application deployments, releases, and production changes. Analyze application logs and system metrics to identify root causes and recommend preventive measures. Document incidents, resolutions, and technical procedures to improve support efficiency. Participate in continuous improvement initiatives to enhance application reliability and performance.<br>Requirements Bachelor's degree in Computer Science, Information Technology, Software Engineering, or a related field.3+ years of experience in Application Support or a similar technical support role. Experience providing L1/L2 support for enterprise applications. Strong SQL skills with the ability to troubleshoot database-related issues. Experience working with APIs and diagnosing integration issues. Familiarity with application monitoring and logging tools. Development background with knowledge of application deployments and release processes. Strong analytical and problem-solving skills. Excellent communication skills and the ability to work collaboratively across technical teams. Experience working in ITIL-based support environments is a plus. Saudi Nationals are encouraged to apply.

We are looking for a Cybersecurity Engineer to join a large-scale digital transformation program supporting critical enterprise and government platforms. The successful candidate will help secure enterprise infrastructure, applications, cloud environments, and business systems by implementing security best practices, monitoring threats, responding to incidents, and ensuring compliance with organizational security standards. This is an onsite position based in Riyadh.<br>Key Responsibilities Implement and maintain cybersecurity controls across enterprise infrastructure. Monitor security events and investigate alerts using security monitoring tools. Conduct vulnerability assessments and support remediation activities. Participate in incident response, threat analysis, and root cause investigations. Implement endpoint, network, and cloud security best practices. Perform security risk assessments and recommend mitigation plans. Support compliance with cybersecurity frameworks, policies, and regulatory requirements. Collaborate with infrastructure, cloud, application, and network teams to improve security posture. Assist with security audits, penetration testing activities, and security documentation. Prepare technical reports and maintain security documentation in both Arabic and English when required.<br>Requirements Saudi National. Bachelor's degree in Cybersecurity, Computer Science, Information Security, Information Technology, or a related field. Minimum 4 years of hands-on cybersecurity experience. Experience securing enterprise IT infrastructure. Knowledge of network security, endpoint security, identity and access management, and vulnerability management. Experience with SIEM platforms and security monitoring. Good understanding of security frameworks such as ISO 27001, NIST CSF, or CIS Controls. Familiarity with cloud security concepts (Azure, AWS, or GCP). Experience responding to security incidents and conducting investigations. Strong analytical and problem-solving skills. Excellent communication skills. Fluent Arabic and English. Willing to work onsite in Riyadh.

For one of our clients, we’re looking for an Applications Support Engineer to provide first-line support for business-critical applications, ensuring timely issue resolution and excellent user satisfaction in a shift-based environment.<br>Key Responsibilities Serve as the first point of contact for business users for application issues and requests Log, categorize, prioritize, and track incidents and service requests via ITSMPerform initial troubleshooting and identify root causes and resolutions Troubleshoot integrations, interfaces, and data flow between systems Analyze logs, errors, API responses, and traces to resolve production issues Escalate complex incidents to development / QA / infrastructure / vendors Monitor application performance and proactively identify risks to operations Support users across multiple shifts to ensure continuous service availability Validate fixes and enhancements before production deployment Support UAT, regression testing, and issue verification Maintain documentation (known errors, SOPs, knowledge base) Provide user guidance and training on application functionality and business processes Collaborate with stakeholders to drive improvement opportunities Ensure adherence to SLAs and support processes<br>Requirements At least 2 years of experience in Applications Support in Healthcare / health insurance / hospital environment. Experience supporting core business applications in production Exposure to HIS / EMR-EHR / healthcare applications Experience with customer-facing digital platforms and mobile apps Strong troubleshooting, analytical, and problem-solving skills Ability to work in a shift-based support model Experience with ticketing and ITSM tools Understanding of SDLC / testing lifecycles Basic knowledge of databases and SQLExcellent communication skills with both technical and non-technical stakeholders Strong customer service orientation and ownership mindset Arabic & English fluency (spoken and written) Familiarity with APIs, integrations, and interfaces

We are seeking a highly experienced L3 Network Engineer to lead the design, implementation, and support of advanced network infrastructures across enterprise and hybrid cloud environments. This role is ideal for professionals passionate about network architecture, automation, and high-level troubleshooting.<br>Job Overview You will be responsible for driving network architecture strategies, managing complex environments (LAN, WAN, WLAN, SD-WAN), and serving as the highest technical escalation point across multiple projects.<br> Key Responsibilities Lead and design scalable enterprise network architectures Implement and manage LAN, WAN, WLAN, SD-WAN, and cloud-integrated networks Act as L3 escalation point for critical network issues Perform root cause analysis and resolve complex incidents Support presales activities (designs, solutions, ROI analysis) Conduct network assessments and recommend improvements Manage vendors and service providers Lead large-scale network implementation projects Automate network operations using Python, Ansible, or similar tools Develop and test disaster recovery plans Monitor network performance and ensure optimal efficiency Document network designs and change management processes Requirements Bachelor’s degree in Computer Science, IT, or related field5+ years of hands-on network engineering experience CCIE certification (Mandatory) Strong knowledge of TCP/IP, DNS, DHCP, VPN, routing & switching Hands-on experience with Cisco (Routers, Switches, Wireless, ACI) Experience in cloud/hybrid environments (AWS, Azure, or GCP) Strong troubleshooting and analytical skills Skills & Expertise Advanced Enterprise Networking (Routing, Switching, Wireless, NAC, ACI/Spine-Leaf) Experience with SD-WAN and network automation Scripting knowledge (Python, Ansible) Strong understanding of network security and access control Expertise in performance tuning and root cause analysis Ability to lead projects and work across multiple IT domains

Company Description Starways is a Saudi technology partner specializing in complex government digital transformation, building platforms that power key public services across housing, inspections, trade licensing, and citizen digital journeys since 2009. With over 100 projects delivered and more than 70 government clients, Starways maintains a strong record of on-time delivery and long-term collaboration. The company focuses on engineering government-grade platforms aligned with SDAIA, PDPL, NCA, and ISO compliance frameworks, ensuring secure and scalable solutions. Starways’ expertise spans digital government platforms, AI and data, cloud and Dev Ops, enterprise applications, RPA, and technical outsourcing. The organization is trusted by major Saudi entities, including ministries and national companies, offering talent the chance to work on impactful, nation-scale systems.<br>We are looking for a hands-on Dev Ops Engineer with strong cloud and automation experience to build, manage, and optimize modern application platforms. - Suadi Nationality <br>Key Responsibilities:<br>* Manage and support cloud environments, primarily Google Cloud Platform (GCP) and Oracle Cloud Infrastructure (OCI). Experience with AWS is a plus.* Configure and maintain Git Lab projects, repositories, and CI/CD pipelines.* Design, automate, and support deployment pipelines for applications such as . NET, Laravel, and other modern technologies.* Collaborate with developers, QA, Business Analysts, and infrastructure teams to improve software delivery.* Implement Dev Ops best practices across planning, security, testing, CI/CD, monitoring, and operations.<br>Requirements:<br>* Experience with GCP and/or OCI (AWS is an advantage).* Strong knowledge of Git Lab and CI/CD.* Experience with Linux, scripting, containers (Docker/Kubernetes), and Infrastructure as Code is preferred.* Strong problem-solving, automation, and collaboration skills.

Join Our Growing Team.. Nema Supply in Jeddah, Saudi Arabia is looking for a results-driven MEP Sales Engineer to join the team. The ideal candidate is a motivated sales professional with a strong technical background in Mechanical, Electrical, and Plumbing (MEP) systems, excellent relationship-building skills, and a proven ability to identify and secure new business opportunities.<br>Key Responsibilities:Develop and execute sales strategies to achieve revenue and profitability targets. Identify and pursue new business opportunities across commercial, industrial, and infrastructure sectors. Build and maintain strong relationships with consultants, contractors, developers, government entities, and end users. Promote and sell MEP products, systems, and engineering solutions. Prepare technical and commercial proposals, quotations, and tender submissions. Conduct technical presentations and product demonstrations to clients. Review project specifications, drawings, and BOQs to identify sales opportunities. Negotiate commercial terms and successfully close sales agreements. Coordinate with engineering, procurement, and project teams to ensure smooth project execution. Monitor market trends, competitor activities, and customer requirements. Maintain an active sales pipeline and provide regular sales forecasts and reports.<br>Requirements:Bachelor's degree in Mechanical Engineering (Preferred). 3–7 years of experience in MEP sales, technical sales, or business development. Strong knowledge of MEP systems and construction industry practices. Ability to read engineering drawings, specifications, and BOQs. Excellent communication, negotiation, and presentation skills. Self-motivated with a strong customer focused approach. Valid driving license (preferred).<br>Core Sales Capabilities:Business Development & Lead Generation. Consultative & Solution Selling. Proposal Preparation & Cost Analysis. Contract Negotiation & Closing. Market Intelligence & Competitor Analysis. Customer Relationship Management (CRM). Strategic Planning & Revenue Growth.<br>What We Offer:Competitive salary and excellent attractive performance based commission. Career growth and professional development opportunities. Supportive and collaborative work environment.

Managed.sa is seeking an experienced OT Cybersecurity Engineer to support the security of operational technology and industrial control system environments.<br><br>The successful candidate will assess OT security risks, design and implement security controls, support compliance activities, and work closely with technical and operational stakeholders to strengthen industrial cybersecurity resilience.<br><br>Key Responsibilities<br><br>Conduct cybersecurity assessments for OT, ICS, and SCADA environments Identify vulnerabilities, risks, and security gaps within industrial networks Review OT network architecture, segmentation, remote access, and security controls Develop OT cybersecurity policies, procedures, standards, and remediation plans Support the implementation of OT security controls and monitoring solutions Conduct risk assessments and maintain OT cybersecurity risk registers Support incident response and investigation activities involving OT environments Coordinate with engineering, operations, IT, vendors, and client stakeholders Prepare technical reports, assessment findings, and management presentations Support compliance with applicable cybersecurity and industrial security standards Contribute to OT cybersecurity projects from assessment through implementation<br><br>Requirements<br><br>Bachelor's degree in Cybersecurity, Information Technology, Engineering, or a related field3-5 years of relevant experience in OT, ICS, SCADA, or industrial cybersecurity Strong understanding of industrial networks, systems, and communication protocols Experience assessing or securing OT and ICS environments Knowledge of network segmentation, firewalls, access control, and security monitoring Experience conducting risk assessments and developing remediation recommendations Strong technical documentation and stakeholder-management skills Good written and spoken English Ability to work on-site in Riyadh<br><br>Preferred Qualifications<br><br>Knowledge of IEC 62443, NIST SP 800-82, NCA OTCC, or similar standards Experience within utilities, energy, manufacturing, oil and gas, or critical infrastructure Experience with OT security tools, industrial firewalls, SIEM, or network monitoring solutions Relevant certifications such as GICSP, GRID, ISA/IEC 62443, CISSP, or similar