مهندس مكافحة حرائق

<h3 >About PrimeGate for Communications and IT</h3> <p >PrimeGate for Communications and IT is seeking a dedicated HSE Engineer to join its team in Riyadh, Saudi Arabia. This full-time position is crucial for ensuring a safe and compliant working environment across the company's operations, upholding the highest standards of health, safety, and environmental management.</p> <h3 >The Role of HSE Engineer</h3> <p >The HSE Engineer will be responsible for overseeing and implementing health, safety, and environmental protocols within the organization. This role requires a professional with <strong >5 to 10 years of experience</strong> in the field, focusing on maintaining high standards of safety and regulatory adherence to protect employees, assets, and the environment.</p> <h3 >Key Responsibilities</h3> <ul > <li >Ensure strict compliance with all health, safety, and environmental regulations.</li> <li >Identify potential workplace hazards and conduct thorough risk assessments.</li> <li >Perform regular safety inspections, audits, and investigate incidents to determine root causes.</li> <li >Develop and implement effective HSE policies and procedures.</li> <li >Organize and conduct safety training sessions, toolbox talks, and emergency drills.</li> <li >Monitor the correct use of Personal Protective Equipment (PPE) and adherence to safe work practices.</li> <li >Maintain comprehensive HSE records, reports, and all necessary regulatory documentation.</li> <li >Promote environmental protection initiatives, including waste management and pollution control.</li> <li >Recommend and implement corrective and preventive actions to continuously enhance workplace safety.</li> <li >Cultivate and foster a strong safety culture focused on continuous improvement within the company.</li> </ul> <h3 >Required Qualifications</h3> <ul > <li >A Bachelor’s degree from an accredited institution.</li> <li >Demonstrated strong knowledge of HSE regulations and SEC standards.</li> <li >Minimum of <strong >5 to 10 years of relevant experience</strong>, including SEC approval.</li> </ul> <h3 >Work Environment and Expectations</h3> <p >This is a <strong >full-time position</strong> based in Riyadh, where the HSE Engineer will play a pivotal role in maintaining and enhancing the company's commitment to health, safety, and environmental excellence. The successful candidate will work collaboratively to ensure all operations meet stringent safety standards and regulatory requirements.</p> <h3 >Application Process</h3> <p >Candidates who meet the outlined qualifications are encouraged to apply. We look forward to reviewing your application.</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><span><span><strong>Job Title&nbsp;</strong></span></span></p><br><p><span><span><strong>Fire Fighter&nbsp;</strong></span></span></p><br><p><span><span><strong>Position Description</strong></span></span></p><br><p><span><span><strong>Ma'aden Barrick Copper Company (MBCC)</strong> is seeking to recruit a qualified <strong>Firefighter</strong> to join and strengthen our Emergency Response Team (ERT).</span></span></p><br><p><span><span>Join our exceptional team and embody MBCC's core values as you work with us. We are looking for individuals who can champion MBCC's DNA by:</span></span></p><br><ul><li><p><span><span>Communicating Honestly, Transparently, and Acting with Integrity&nbsp;</span></span></p><br></li><li><p><span><span>Exhibiting a Results-Driven Approach&nbsp;</span></span></p><br></li><li><p><span><span>Delivering Solutions that are Fit for Purpose&nbsp;</span></span></p><br></li><li><p><span><span>Dedicating Themselves to Building a Sustainable Legacy&nbsp;</span></span></p><br></li><li><p><span><span>Taking Responsibility and Being Accountable&nbsp;</span></span></p><br></li><li><p><span><span>Committing to Zero Harm&nbsp;</span></span></p><br></li><li><p><span><span>Cultivating Strong and Meaningful Partnerships&nbsp;</span></span></p><br></li></ul><p><span><span>If you're ready to protect people, assets, and the environment while contributing to a emergency response team, we encourage you to apply and become a valued member of our diverse workforce.</span></span></p><br><p><span><span><strong>Responsibilities:</strong></span></span></p><br><p><span><span><strong>Emergency Response Operations</strong></span></span></p><br><ul><li><p><span><span>Respond to fire, rescue, hazardous materials (HazMat), medical emergencies, and other emergency incidents across surface and underground operations.&nbsp;</span></span></p><br></li><li><p><span><span>Perform structural, industrial, vehicle, and wildland firefighting in accordance with approved procedures.&nbsp;</span></span></p><br></li><li><p><span><span>Participate in underground mine emergency response, rescue, and evacuation operations.&nbsp;</span></span></p><br></li><li><p><span><span>Provide emergency standby during high-risk activities, shutdowns, confined space work, and hot work.</span></span></p><br></li><li><p><span><span>Maintain readiness for shift work, standby, and emergency callouts.</span></span></p><br></li><li><p><span><span>Provide First Aid/Basic Life Support (BLS) until higher-level medical care is available.&nbsp;</span></span></p><br><p><span><span><strong>Firefighting Equipment &amp; Emergency Readiness</strong></span></span></p><br></li><li><p><span><span>Conduct inspections of fire trucks, emergency Vehicles, rescue vehicles, firefighting equipment, SCBA, and rescue equipment.&nbsp;</span></span></p><br></li><li><p><span><span>Operate fire trucks, fire pumps, foam systems, hose lines, monitors, and portable firefighting equipment.&nbsp;</span></span></p><br></li><li><p><span><span>Ensure all firefighting and rescue equipment remains operational and ready for deployment.&nbsp;</span></span></p><br></li><li><p><span><span>Report equipment defects and support preventive maintenance activities.&nbsp;</span></span></p><br></li><li><p><span><span>Inspect, clean, test, and maintain PPE and SCBA.</span></span></p><br></li><li><p><span><span>Restore vehicles and emergency equipment to operational readiness following incidents.</span></span></p><br><p><span><span><strong>Fire Prevention &amp; Safety</strong></span></span></p><br></li><li><p><span><span>Conduct fire prevention inspections of buildings, workshops, warehouses, fuel facilities, and underground operations.&nbsp;</span></span></p><br></li><li><p><span><span>Support inspection, testing, and maintenance of hydrants, hose reels, portable fire extinguishers, and fire protection systems.&nbsp;</span></span></p><br></li><li><p><span><span>Identify fire hazards and recommend corrective actions.&nbsp;</span></span></p><br></li><li><p><span><span>Support fire impairment management and emergency planning activities.</span></span></p><br></li><li><p><span><span>Participate in the Journey to Zero safety program.</span></span></p><br></li><li><p><span><span>Identify and report hazards and support corrective actions.&nbsp;</span></span></p><br><p><span><span><strong>Emergency Training &amp; Preparedness</strong></span></span></p><br></li><li><p><span><span>Participate in emergency drills, simulations, and practical firefighting exercises.&nbsp;</span></span></p><br></li><li><p><span><span>Maintain competency in firefighting, rescue, SCBA, first aid, HazMat, and emergency response techniques.&nbsp;</span></span></p><br></li><li><p><span><span>Assist in delivering fire safety awareness sessions to employees and contractors.&nbsp;</span></span></p><br></li><li><p><span><span>Participate in emergency response planning and site familiarization.&nbsp;</span></span></p><br></li><li><p><span><span>Participate in pre-incident planning.</span></span></p><br><p><span><span><strong>Incident Reporting &amp; Communication</strong></span></span></p><br></li><li><p><span><span>Complete incident reports, equipment inspection records, and accurate training documentation on time.&nbsp;</span></span></p><br></li><li><p><span><span>Maintain effective communication with Incident Command, Control Room, Security, Medical Team, and Operations.&nbsp;</span></span></p><br></li><li><p><span><span>Follow Emergency Response Team Standard Operating Procedures (SOPs) and Incident Command System (ICS) requirements</span></span></p><br><p><span><span><strong>Cross-Functional Collaboration</strong></span><span>.&nbsp;</span></span></p><br></li><li><p><span><span>Work closely with Mining, Process Plant, Maintenance, Security, Medical, and other departments during emergency response operations.&nbsp;</span></span></p><br></li><li><p><span><span>Support emergency response contractors and mutual aid agencies when required.&nbsp;</span></span></p><br></li><li><p><span><span>Participate in continuous improvement initiatives that enhance emergency preparedness and operational readiness.</span></span></p><br><p><span><span><strong>Qualification Requirements:</strong></span></span></p><br></li><li><p><span><span>&nbsp;Diploma in Fire Science, Emergency Management, OHS or A related field.</span></span></p><br></li><li><p><span><span>&nbsp;Firefighter I &amp; II qualification or equivalent industrial firefighting certification.&nbsp;</span></span></p><br></li><li><p><span><span>&nbsp;Valid driver's license.&nbsp;</span></span></p><br></li><li><p><span><span>&nbsp;Current First Aid / Basic Life Support (BLS) certification.&nbsp;</span></span></p><br></li><li><p><span><span>&nbsp;Medically and physically fit to perform firefighting duties and wear SCBA.&nbsp;</span></span></p><br></li><li><p><span><span>&nbsp;Fire Truck Driver/Operator qualification (preferred).&nbsp;</span></span></p><br></li><li><p><span><span>&nbsp;HazMat Operations, Technical Rescue, or Underground Mine Rescue certification (preferred).</span></span></p><br><p><span><span><strong>Experience and Skills Requirements:</strong></span></span></p><br></li><li><p><span><span>Minimum two years' experience in industrial firefighting, emergency response, mining, oil &amp; gas, or other high-risk industries.&nbsp;</span></span></p><br></li><li><p><span><span>&nbsp; &nbsp; &nbsp; Experience operating fire trucks, firefighting pumps, rescue equipment, and SCBA.&nbsp;</span></span></p><br></li><li><p><span><span>&nbsp;Knowledge of industrial fire protection systems and firefighting tactics.&nbsp;</span></span></p><br></li><li><p><span><span>&nbsp; &nbsp; &nbsp; Experience participating in emergency drills and incident response. &nbsp;</span></span></p><br></li><li><p><span><span>&nbsp;Knowledge of Incident Command System (ICS).&nbsp;</span></span></p><br></li><li><p><span><span>&nbsp; Strong communication and teamwork skills.&nbsp;</span></span></p><br></li><li><p><span><span>&nbsp;Ability to work safely in physically demanding environments.&nbsp;</span></span></p><br></li><li><p><span><span>&nbsp; Basic computer skills for reporting and inspection records.&nbsp;</span></span></p><br></li><li><p><span><span>&nbsp; &nbsp; &nbsp; Ability to communicate effectively in English; Arabic is an advantage.</span></span></p><br></li><li><p><span><span>Underground mine emergency response experience (preferred).</span></span></p><br></li><li><p><span><span>Experience operating ambulances, HazMat, or rescue vehicles.</span></span></p><br></li><li><p><span><span>Experience supporting fire system inspection, testing, and commissioning</span><span>.</span></span></p><br><p><span><span><strong>What We Can Offer You:</strong></span></span></p><br></li><li><p><span><span>A comprehensive compensation package including bonuses and site-specific benefits.&nbsp;</span></span></p><br></li><li><p><span><span>&nbsp;The opportunity to protect people, company assets, and the environment.&nbsp;</span></span></p><br></li><li><p><span><span>&nbsp;Work in a dynamic, collaborative, progressive, and high-performing Emergency Response Team.&nbsp;</span></span></p><br></li><li><p><span><span>&nbsp;Ongoing professional development and emergency response training.&nbsp;</span></span></p><br></li><li><p><span><span>Opportunities to grow your career within Ma'aden Barrick Copper Company.&nbsp;</span></span></p><br></li><li><p><span><span>&nbsp;Access to a variety of career opportunities across the organization.</span></span></p><br></li></ul><p><span><span><strong>Please forward applications before: 24 July 2026</strong></span></span></p><br><p><span><span><strong>We are committed to a safe work environment, sending every person home safe and healthy every day and leaving a sustainable legacy on our host communities.</strong></span></span></p><br><p><span><i><span>Thank you for your application, however, only those selected for an interview will be contacted.</span></i></span></p><br><br> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> 2+ years </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>Job Summary We are seeking an experienced Site HVAC Engineer to oversee and supervise all Heating, Ventilation, and Air Conditioning (HVAC) works on construction projects.<br> The successful candidate will ensure that HVAC installations are executed in accordance with approved drawings, project specifications, applicable codes, quality standards, and project schedules while coordinating with consultants, contractors, and multidisciplinary teams.<br> Key Responsibilities Supervise and monitor all HVAC installation works on-site to ensure compliance with approved drawings, specifications, and contract requirements.<br> Review HVAC shop drawings, material submittals, method statements, and technical documentation.<br> Coordinate HVAC activities with architectural, structural, electrical, plumbing, and fire protection disciplines.<br> Conduct site inspections to verify the quality of ductwork, piping, insulation, equipment installation, and overall workmanship.<br> Monitor contractor performance and ensure HVAC works are completed according to project schedules and milestones.<br> Verify the installation of HVAC equipment, including chillers, air handling units (AHUs), fan coil units (FCUs), ventilation systems, exhaust systems, and ductwork.<br> Ensure compliance with local regulations, international standards, and health and safety requirements.<br> Review and witness testing, balancing, commissioning, and functional performance of HVAC systems.<br> Prepare and review inspection requests (IRs), testing reports, snag lists, punch lists, and close-out documentation.<br> Participate in project coordination meetings and provide technical support and progress updates.<br> Review as-built drawings and verify completed HVAC installations prior to project handover.<br> Evaluate technical variations, change orders, and site modifications when required.<br> Maintain accurate records of inspections, approvals, testing results, and site activities.<br> Support the successful commissioning and handover of HVAC systems.<br> Qualifications Bachelor's degree in Mechanical Engineering or HVAC Engineering.<br> Minimum 10 years of experience in HVAC site supervision on construction projects.<br> Experience in commercial, residential, healthcare, hospitality, industrial, or infrastructure projects.<br> Strong knowledge of HVAC systems, chilled water systems, ventilation, smoke extraction, and building services.<br> Familiarity with local and international HVAC codes, standards, and best engineering practices.<br> Professional engineering registration or relevant accreditation is preferred.<br> Technical Skills Proficiency in AutoCAD , Revit MEP , Navisworks , and Microsoft Office .<br> Ability to review HVAC drawings, shop drawings, calculations, and technical submittals.<br> Knowledge of HVAC testing, adjusting and balancing (TAB), commissioning, and QA/QC procedures.<br> Experience with project management and document control software is an advantage.<br> Core Competencies Strong HVAC site supervision and coordination skills.<br> Excellent communication and stakeholder management.<br> Strong technical and analytical problem-solving abilities.<br> Attention to detail and commitment to quality.<br> Time management and ability to work under pressure.<br> Teamwork and leadership skills.<br> Strong reporting and documentation capabilities.<br></span> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> No experience required </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>This role is responsible for the design, implementation, and maintenance of electrical systems within high-rise buildings and construction projects.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Bachelor's degree in Electrical Engineering. Minimum 7 to 10 years of experience. Previous experience in high-rise building maintenance. Experience in construction projects. Strong knowledge of High Voltage (HV) and Low Voltage (LV) systems. Experience with Building Management Systems (BMS). Knowledge of Fire Alarm Systems. Experience with Control Systems. Knowledge of CCTV and Security Systems.</p><p></p></section>

Jasara is a project management consultancy focused on the delivery of construction projects across complex Mechanical, Electrical, and Plumbing scopes. The team plays a critical role in ensuring MEP installations are delivered in line with approved drawings, technical specifications, quality expectations, safety requirements, and project schedules. This is an opportunity to contribute to projects where strong technical oversight and disciplined execution have a direct impact on successful delivery.<br><br>In this role, you will help drive the quality and progress of MEP works across the construction lifecycle, supporting effective coordination between technical teams and maintaining high standards of compliance and execution. You will work closely with project leadership and site stakeholders to provide engineering oversight, resolve issues, and help keep project delivery on track.<br><br>Responsibilities<br><br>Supervise day-to-day MEP construction activities on site Review and monitor MEP shop drawings, material submittals, method statements, and RFIsEnsure MEP works are executed in accordance with approved drawings, specifications, local codes, and project requirements Conduct inspections and witness testing and commissioning activities Monitor contractor progress and identify potential delays or quality issues Coordinate MEP activities with civil, architectural, and other disciplines Review contractor progress reports and verify completed work Raise NCRs, site observations, and follow up on corrective actions when required Attend site meetings and provide technical support to the Project Manager and Resident Engineer Ensure compliance with HSE and quality standards throughout project execution Participate in snagging, de-snagging, and project handover activities<br><br>Requirements<br><br>Bachelor's degree in Mechanical Engineering, Electrical Engineering, or a related discipline7 years of experience in MEP site supervision within PMC or consultancy environments, including work on large-scale building, commercial, residential, or mixed-use projects Mechanical engineering background, with strong knowledge of HVAC, plumbing, fire fighting, electrical, and ELV systems Experience preparing technical reports for construction or MEP projects Familiarity with international standards and local authority regulations, including the Saudi Building Code Professional proficiency in both Arabic and English Experience coordinating with contractors and client-side teams is a plus

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><strong>Leverage your expertise and join the dynamic team of a leading Saudi contractor focused on high-quality large-scale residential projects in Saudi Arabia.</strong></p><br><p>The <strong>Mechanical Construction Engineer</strong> is responsible for supervising and coordinating all mechanical construction activities across project sites, ensuring work is executed safely, efficiently, and in accordance with approved drawings, specifications, quality standards, and project schedules. The role involves close coordination with technical teams, subcontractors, consultants, and site teams to support successful project execution across all construction phases.</p><br><strong>Key Accountabilities</strong><p><strong>The position involves:</strong></p><br><ul><li>Supervise daily mechanical construction activities on-site to ensure compliance with approved mechanical drawings, specifications, and project requirements.</li><li>Coordinate with architectural, civil, electrical, MEP, technical, and planning teams to ensure smooth project execution and proper work sequencing.</li><li>Monitor site progress, manpower productivity, subcontractor performance, and material availability.</li><li>Ensure mechanical works are carried out according to project schedules, quality standards, and safety regulations.</li><li>Review and report site progress, technical issues, and construction challenges to project management.</li><li>Assist in resolving technical and site-related mechanical issues to maintain construction progress targets.</li><li>Coordinate and supervise subcontractors, foremen, and mechanical site workforce during project execution.</li><li>Conduct regular site inspections to ensure compliance with company standards and authority requirements.</li><li>Support project planning activities, work coordination, and construction sequencing.</li><li>Monitor material usage and ensure proper handling, installation, and control of mechanical site resources.</li><li>Prepare daily, weekly, and monthly progress reports and maintain proper documentation of site activities.</li><li>Participate in testing, commissioning, snagging, handover, and project close-out activities.</li></ul><strong>Knowledge, Skills, and Experience</strong><p><strong>We are Looking for: <br></strong></p><br><ul><li>Bachelor’s Degree in Mechanical Engineering or related field.</li><li>Minimum 5–8 years of experience in mechanical construction and site supervision within large-scale construction projects.</li><li>Previous experience in residential, hospitality, and/or mixed-use projects is preferred.</li><li>Strong background in mechanical installation, site execution, and subcontractor coordination.</li><li>Experience working with main contractors or construction companies in Saudi Arabia is preferred.</li><li>Good knowledge of mechanical systems (HVAC, plumbing, fire fighting), construction methods, site operations, quality standards, and safety regulations.</li><li>Familiarity with project planning, scheduling, and construction coordination processes.</li><li>Proficiency in AutoCAD, MS Office, and construction reporting tools.</li><li>Strong communication, coordination, and problem-solving skills.</li><li>Ability to work in fast-paced project environments and manage multiple site activities.</li><li>Good reporting and documentation skills with strong attention to detail.</li></ul> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> No experience required </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

Company Description PREVEN Fire Engineering Consultancy is a Saudi-based firm specializing in engineering solutions for fire protection, prevention, and life safety across a range of facilities and industries. The consultancy focuses on delivering compliant, efficient, and reliable fire engineering designs and services that align with national safety standards. Its team of certified engineers has deep expertise in the regulations of the Saudi General Directorate of Civil Defense and the Supreme Authority for Industrial Security (SAIS). By combining regulatory knowledge with practical engineering experience, PREVEN supports clients at every project stage, from planning and design to implementation and inspection. The firm offers a professional environment for safety-focused engineers who want to contribute to safer communities and resilient infrastructure. Role Description The Fire Life Safety Engineer is a full-time, on-site role based in Jeddah. The role involves designing and reviewing fire protection and life safety systems, including fire detection, alarm, and suppression systems, to ensure compliance with Saudi Civil Defense and SBC regulations. Day-to-day tasks include performing code and standards analysis, preparing technical reports, conducting risk assessments, and participating in site inspections and audits. The engineer collaborates with project teams, architects, and contractors to integrate fire and life safety requirements into building and industrial facility designs. The role also includes providing technical guidance to clients, supporting approval processes with authorities, and recommending improvements to enhance overall safety performance. Qualifications Strong expertise in Fire Protection Engineering and Safety Engineering, with the ability to design and review fire safety solutions. Demonstrated knowledge of Fire Safety and Life Safety principles, including occupant protection, egress planning, and hazard assessment. Hands-on experience with Fire Suppression Systems, such as sprinklers, clean agent systems, and related control and detection technologies. Familiarity with Saudi General Directorate of Civil Defense and SBC regulations, as well as relevant international fire and building codes NFPA. Bachelor’s degree in Fire Protection Engineering, Electrical engineer, and Architectural engineer; advanced certifications in fire safety are an advantage. Proficient in using engineering design tools and software (e.g., Auto CAD) and preparing clear technical documentation. Strong analytical, problem-solving, and communication skills, with the ability to work collaboratively in multidisciplinary project teams. Previous experience in fire engineering consultancy, (industrial Residential business,,, etc) projects, or building safety design in Saudi Arabia.

<div dir="rtl"><h3 >نبذة عن الدور</h3> <p >تبحث مزرعة الوطنية الزراعية في الجوف عن <strong >مهندس زراعي</strong> للانضمام إلى فريقها بدوام كامل. يهدف هذا الدور إلى الإشراف على العمليات الزراعية، من دراسة التربة وتصميم أنظمة الري إلى متابعة إنتاج المحاصيل وجودتها، مع الالتزام بالمعايير الزراعية ومتطلبات السلامة. يتطلب الدور خبرة عملية تتراوح بين 0-1 سنة.</p> <h3 >المهام والمسؤوليات الأساسية</h3> <ul > <li >دراسة خصائص التربة الزراعية الفيزيائية والكيميائية ومكوناتها، ومتابعة فحص عينات النبات والتربة ومياه الري وتحليل نتائجها.</li> <li >دراسة واختبار أنواع الأسمدة المناسبة وتقييم مدى استجابة المزروعات لها.</li> <li >دراسة أنظمة الري واختيار الأنسب منها (كالري السطحي، بالرشاشات، المحوري، أو الموضعي).</li> <li >تصميم مخططات وشبكات الري والصرف الزراعي ومتابعة إجراءات التركيب، وتقييم كفاءة الأنظمة وتطويرها.</li> <li >تحديد الآلات الزراعية المناسبة (كآلات الحراثة والزراعة والرش والحصاد وآلات جرش وخلط الحبوب)، وإعداد برامج تشغيل وصيانة الآلات والتأكد من جاهزيتها.</li> <li >تطوير أساليب وإجراءات العمل ومواكبة التطورات التقنية في المجال الزراعي.</li> <li >إعداد الوثائق والتقارير المتخصصة بنتائج الأعمال وعرضها وتوضيحها وحفظها في قاعدة البيانات الخاصة بها وفقاً للسياسات والإجراءات المعتمدة.</li> </ul> <h3 >الإشراف على العمليات الزراعية</h3> <ul > <li >تخطيط ومتابعة العمليات الزراعية وفق الخطط والمواسم الزراعية المعتمدة.</li> <li >الإشراف على عمليات زراعة وإنتاج المحاصيل ومتابعة مراحل النمو والتأكد من تطبيق الممارسات الزراعية المناسبة.</li> <li >متابعة برامج الري والتأكد من توفير الاحتياجات المائية للمحاصيل بكفاءة وفي الأوقات المناسبة.</li> <li >إعداد ومتابعة برامج التسميد وتحسين استخدام الأسمدة وفق احتياجات المحاصيل ونتائج الفحوصات الزراعية.</li> <li >متابعة برامج مكافحة الآفات والأمراض الزراعية وتحديد الإجراءات المناسبة للحد من انتشارها.</li> <li >إجراء ومتابعة الفحوصات الزراعية للتربة والمحاصيل وتقييم الحالة الصحية والنمائية للنباتات.</li> <li >متابعة استخدام المبيدات والأسمدة والمواد الزراعية والتأكد من استخدامها وفق التعليمات والجرعات المعتمدة.</li> <li >الإشراف على العمالة الزراعية وتوزيع المهام ومتابعة تنفيذ الأعمال وفق الخطط والتعليمات.</li> <li >متابعة عمليات الحصاد والتجهيز والتأكد من الالتزام بمعايير الجودة وتقليل الفاقد الزراعي.</li> <li >متابعة استهلاك المياه والأسمدة والمواد الزراعية والمساهمة في تحسين كفاءة استخدام الموارد وتقليل التكاليف.</li> <li >إعداد تقارير الإنتاج والعمليات الزراعية ومؤشرات الأداء وتوثيق الملاحظات والإجراءات التصحيحية.</li> <li >تقديم المقترحات الفنية التي تسهم في تحسين الإنتاجية وجودة المحاصيل وكفاءة العمليات الزراعية.</li> </ul> <h3 >المؤهلات والخبرات المطلوبة</h3> <ul > <li >درجة البكالوريوس في الهندسة الزراعية أو مجال ذي صلة.</li> <li >خبرة عملية تتراوح بين 0-1 سنة في مجال الهندسة الزراعية.</li> <li >القدرة على تطبيق الممارسات الزراعية المناسبة والالتزام بالمعايير ومتطلبات الجودة والسلامة.</li> </ul> <h3 >المهارات والكفاءات</h3> <ul > <li >مهارات تحليلية قوية لدراسة التربة والمياه والنباتات.</li> <li >القدرة على تصميم وتطوير أنظمة الري والصرف.</li> <li >معرفة بالآلات الزراعية وبرامج تشغيلها وصيانتها.</li> <li >مهارات إشرافية وتنظيمية لمتابعة العمليات والعمالة.</li> <li >القدرة على إعداد التقارير الفنية وتقديم المقترحات.</li> <li >الالتزام بمعايير الجودة والسلامة الزراعية.</li> </ul> <h3 >بيئة العمل</h3> <p >هذا الدور بدوام كامل ومقره في الجوف، ضمن فريق مزرعة الوطنية الزراعية. يتطلب الدور التزاماً بالعمل الميداني والإشراف المباشر على العمليات الزراعية لضمان تحقيق الأهداف الإنتاجية والجودة. ندعو المهندسين الزراعيين الطموحين الذين يستوفون المتطلبات المذكورة للتقدم لهذه الفرصة.</p></div>

Location: Riyadh, Saudi Arabia We are looking for an experienced Mechanical Sales Engineer – Pumps to join our growing team. This is a specialized technical sales role requiring hands-on experience in pump selection, application engineering, and project sales. We are seeking a professional who can contribute immediately and has a proven track record in the pump industry.<br>Key Responsibilities:<br>Develop and maintain strong relationships with consultants, contractors, and end users. Promote and sell pumping solutions across commercial and industrial projects. Prepare technical pump selections, quotations, and commercial proposals. Interpret pump duty points, system requirements, and hydraulic calculations. Provide technical support throughout the sales cycle, from inquiry to project award. Lead technical-commercial discussions, negotiations, and order closing. Follow projects through technical approvals, pricing, and execution.<br>Requirements:<br>Bachelor's degree in Mechanical Engineering or a related discipline. Proven experience in technical sales of pumps with a pump manufacturer or authorized distributor. Strong knowledge of pump applications, including:Building Services HVACIrrigation Firefighting Systems Wastewater Systems Experience working with leading pump brands such as KSB, Grundfos, Wilo, Xylem, Pentair, Ebara, Armstrong, Patterson, Peerless, or similar.<br>Solid understanding of:<br>Flow and Head calculations Pump Curves Efficiency Motor Power NPSHShut-off Head Operating Range Experience with pump types including:Vertical Multistage Pumps End Suction Pumps Split Case Pumps Submersible Pumps Booster Sets Fire Pump Packages Excellent communication, presentation, and negotiation skills. Ability to manage projects from inquiry through technical approval and final order.<br>Why Join Us?<br>Opportunity to work on high-profile engineering projects. Collaborative and technically driven work environment. Career growth with a company committed to engineering excellence.<br>If you have a strong background in pump sales and application engineering and are ready to make an immediate impact, we'd love to hear from you.

<p>In a world of possibilities, pursue one with endless opportunities. Imagine Next! At Parsons, you can imagine a career where you thrive, work with exceptional people, and be yourself. Guided by our leadership vision of valuing people, embracing agility, and fostering growth, we cultivate an innovative culture that empowers you to achieve your full potential. Unleash your talent and redefine what s possible.</p><p>Parsons is looking for an amazingly talented Utility / Infrastructure Engineer to join our team! The Utility / Infrastructure Engineer will be responsible for the technical coordination, review, construction support, inspection, testing, and handover of infrastructure and utility systems across the project. The role will ensure that utility works are delivered in accordance with approved designs, project specifications, applicable codes and standards, authority requirements, and client requirements. The position will coordinate closely with Civil, Structural, Mechanical, Electrical, Survey, BIM, Construction, Quality, HSE, Planning, Contractors, Utility Authorities, and other project stakeholders to ensure effective delivery of infrastructure and utility networks.</p><p><strong>What You'll Be Doing:</strong></p><ul><li>Coordinate and provide technical engineering support for utility and infrastructure works across the project.</li><li>Review IFC drawings, specifications, design calculations, utility layouts, profiles, and technical documents.</li><li>Review and coordinate utility networks including: Potable water Irrigation water Fire water Stormwater drainage Foul sewer TSE / treated sewage effluent District cooling / chilled water networks Fuel systems interfaces Electrical utilities and duct banks ICT / telecommunications ducting Other underground and above-ground infrastructure systems, as applicable.</li><li>Coordinate utility interfaces with roads, pavements, buildings, structures, airfield facilities, and existing infrastructure.</li><li>Review utility routes, corridors, levels, slopes, profiles, and connection points.</li><li>Verify that utility designs consider capacity, hydraulic requirements, constructability, maintainability, and future expansion.</li><li>Review hydraulic calculations and network capacity requirements for applicable utility systems.</li><li>Review pipe sizing, pressure requirements, flow rates, gradients, invert levels, manholes, chambers, valves, and associated infrastructure.</li><li>Coordinate utility crossings and interfaces with existing and proposed infrastructure.</li><li>Identify clashes and technical interfaces between utility networks and other disciplines.</li><li>Coordinate with BIM teams to support utility clash detection and 3D coordination.</li><li>Review contractor shop drawings, material submittals, method statements, and technical submissions.</li><li>Verify proposed utility materials and equipment comply with approved specifications and project requirements.</li><li>Provide technical support to construction teams during utility installation activities.</li><li>Conduct site inspections and verify installation against approved drawings and specifications.</li><li>Monitor utility installation including excavation, bedding, pipe laying, jointing, backfilling, chambers, manholes, protection, and reinstatement.</li><li>Verify utility levels, alignment, gradients, coordinates, and dimensional requirements in coordination with the Survey team.</li><li>Coordinate with Survey Engineers regarding setting-out and as-built verification.</li><li>Review and witness utility testing activities including pressure testing, leakage testing, flushing, disinfection, CCTV inspection, flow testing, and other applicable tests.</li><li>Review testing and commissioning procedures and verify test results.</li><li>Coordinate with relevant authorities and utility service providers for connections, inspections, approvals, and technical requirements.</li><li>Support coordination with existing utility owners and stakeholders to avoid disruption to operational services.</li><li>Review and resolve RFIs, technical queries, design clarifications, and site engineering issues.</li><li>Assess proposed design changes, technical alternatives, and deviations and provide engineering recommendations.</li><li>Identify utility conflicts, constructability issues, capacity constraints, and technical risks and recommend mitigation measures.</li><li>Support preparation and review of Inspection &amp; Test Plans (ITPs) for utility works.</li><li><br></li></ul><p><strong>What Required Skills You'll Bring:</strong></p><ul><li>Bachelor s degree in Civil Engineering, Mechanical Engineering, Utilities Engineering, or a related discipline.</li><li>5+ years of relevant experience in utilities, infrastructure, civil works, or major construction projects.</li><li>Proven experience in airport, infrastructure, roads, utilities, or large-scale development projects.</li><li>Good understanding of underground utility networks and infrastructure systems.</li><li>Experience in multidisciplinary coordination and utility interface management.</li><li>Experience working with contractors, consultants, authorities, and utility service providers.</li><li>Professional Engineering certification is preferred.</li><li>PMP or equivalent project management training is an advantage.</li><li>Relevant utility / infrastructure certifications are an advantage.</li><li>AutoCAD Civil 3D / BIM / utility coordination training is preferred.</li><li>Relevant HSE certification is an advantage.</li></ul><p>Utility Infrastructure Engineering Underground Utility Networks Water Supply Networks Fire Water Networks Irrigation Networks Sewer &amp; Foul Drainage Stormwater Drainage TSE / Recycled Water Systems District Cooling / Chilled Water Networks Utility Corridors Utility Diversions &amp; Relocations Utility Crossings Pipework &amp; Chambers Hydraulic Calculations Pipe Sizing &amp; Network Capacity Levels, Profiles &amp; Gradients Utility Clash Detection BIM / 3D Utility Coordination Shop Drawing Review Material Submittal Review Method Statement &amp; ITP Review Site Inspection &amp; Construction Support Pressure &amp; Leakage Testing Flushing &amp; Disinfection CCTV / Drainage Inspection Survey &amp; As-Built Verification RFI &amp; Technical Query Management NCR &amp; Corrective Action Management Authority / Utility Provider Coordination As-Built &amp; Handover Documentation AutoCAD / Civil 3D / BIM Applicable AWWA / ASTM / ASME / BS / EN / NFPA Standards</p><p><br></p><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor s degree in Civil Engineering, Mechanical Engineering, Utilities Engineering, or a related discipline.</li><li>5+ years of relevant experience in utilities, infrastructure, civil works, or major construction projects.</li><li>Proven experience in airport, infrastructure, roads, utilities, or large-scale development projects.</li><li>Good understanding of underground utility networks and infrastructure systems.</li><li>Experience in multidisciplinary coordination and utility interface management.</li><li>Experience working with contractors, consultants, authorities, and utility service providers.</li><li>Professional Engineering certification is preferred.</li><li>PMP or equivalent project management training is an advantage.</li><li>Relevant utility / infrastructure certifications are an advantage.</li><li>AutoCAD Civil 3D / BIM / utility coordination training is preferred.</li><li>Relevant HSE certification is an advantage.</li></ul><p>Utility Infrastructure Engineering Underground Utility Networks Water Supply Networks Fire Water Networks Irrigation Networks Sewer &amp; Foul Drainage Stormwater Drainage TSE / Recycled Water Systems District Cooling / Chilled Water Networks Utility Corridors Utility Diversions &amp; Relocations Utility Crossings Pipework &amp; Chambers Hydraulic Calculations Pipe Sizing &amp; Network Capacity Levels, Profiles &amp; Gradients Utility Clash Detection BIM / 3D Utility Coordination Shop Drawing Review Material Submittal Review Method Statement &amp; ITP Review Site Inspection &amp; Construction Support Pressure &amp; Leakage Testing Flushing &amp; Disinfection CCTV / Drainage Inspection Survey &amp; As-Built Verification RFI &amp; Technical Query Management NCR &amp; Corrective Action Management Authority / Utility Provider Coordination As-Built &amp; Handover Documentation AutoCAD / Civil 3D / BIM Applicable AWWA / ASTM / ASME / BS / EN / NFPA Standards</p><p><strong>What Desired Skills You'll Bring:</strong></p><ul><li>Strong technical and analytical skills.</li><li>Excellent problem-solving and engineering judgment.</li><li>Strong multidisciplinary coordination and interface management skills.</li><li>Excellent communication and stakeholder management capabilities.</li><li>Strong attention to detail and commitment to engineering quality.</li><li>Proactive approach to identifying utility conflicts and project risks.</li><li>Ability to coordinate multiple utility interfaces simultaneously.</li><li>Good understanding of construction sequencing and site requirements.</li><li>Ability to work effectively with contractors, consultants, authorities, and project teams.</li><li>Strong documentation and reporting skills.</li><li>Ability to work under demanding project schedules.</li><li>Strong teamwork and collaboration skills.</li><li>Commitment to safety, quality, reliability, and technical compliance.</li></ul>

ACE is a subsidiary of Artelia, France. Artelia, headquartered in Paris, France, is an International multidisciplinary independent group offering a full range of engineering-related services in mobility, water, energy, building and industrial sectors, from technical expertise to complex project delivery, consulting, master planning & feasibility, design & engineering, construction & project management, asset & facility management, turnkey solutions. Artelia, with 11,000 employees and a turnover of €1.35 billion (2025 Consolidated turnover), envisions significant synergies with the Company. Artelia would like to leverage Company’s strength to grow its business in India, Neighbouring countries, Africa, and the Middle East, a key market in their strategic plan.<br>Job Description QUALIFICATIONS<br>Bachelor's or master’s degree in mechanical engineering More than 10 years of experience in design of Pumping stations, Wastewater treatment plants, District Cooling Plants, infrastructure, etc. Design experience with Building MEP (Plumbing, Fire Fighting and HVAC) and Pumps Experience in rehabilitation projects Experience working within engineering consultancies is mandatory Experience in projects in GCC, mainly in UAE and KSAKnowledge of relevant Saudi and UAE Standards HAP software experience Knowledge of hydraulic and surge analysis software’s is a plus<br>2. RESPONSIBILITIES<br>Lead the mechanical design of water and wastewater treatment facilities Design pumping stations, lift stations, treatment plants, desalination support facilities, reservoirs, and associated mechanical infrastructure Prepare mechanical design criteria and basis of design reports Perform equipment sizing calculations and selection for: pumps, blowers, mixers, compressors, screens, grit removal equipment, clarifiers, sludge handling equipment, odor control systems, chemical dosing systems, UV disinfection systems, building HVACPrepare equipment layouts and plant arrangements Design piping systems, valve arrangements and mechanical utilities Prepare equipment and valve schedules Prepare Building HVAC, plumbing and FF layouts and calculations Prepare BOQsPrepare specifications for Mechanical equipment Prepare Datasheets for Mechanical equipment Coordinate with end clients and suppliers Perform Value Engineering studies Provide support in proposals/tenders<br>Job Location: Riyadh, Saudi Arabia

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Senior Mechanical Engineer - ID 35306 GCC / Saudi Arabia 10-15 Years experience SAR 15000 - 20000 Package On-site Apply for this job Job Summary: Our client is seeking a highly experienced Senior Mechanical Engineer to join our team in Riyadh. The ideal candidate will have strong expertise in mechanical systems design and execution, particularly in HVAC, firefighting, plumbing, and infrastructure projects. Key Responsibilities: Prepare, review, and validate mechanical designs, shop drawings, and technical submittals Oversee installation and execution of HVAC, firefighting, and plumbing systems Ensure compliance with project specifications, standards, and regulatory requirements Coordinate with multidisciplinary teams including civil, electrical, and project management Provide technical support during project execution and resolve on-site issues Review contractor submissions and ensure quality and accuracy Monitor project progress and ensure timely delivery of mechanical works</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"><b>Requirements:</b></p><ul><li>Bachelor s degree in Mechanical Engineering</li><li>12 to 16 years of relevant experience</li><li>Strong knowledge of HVAC, firefighting, plumbing systems, and infrastructure works</li><li>Proven experience in preparing and reviewing mechanical designs, shop drawings, and submittals</li><li>Prior experience with EPC and contracting companies is essential</li><li>Previous work experience in Saudi Arabia is required</li></ul><p></p></section>

About Snag Property Inspection Services<br>Snag Property Inspection Services is a leading inspection company delivering quality and independent inspection solutions across all stages of the property lifecycle.<br>We are looking for an experienced Mechanical Engineer to join our team in Riyadh, Saudi Arabia.<br>Key Responsibilities<br>* Inspect HVAC, firefighting, plumbing, and mechanical systems.* Identify defects and manage snagging and de-snagging activities.* Review drawings, Testing & Commissioning (T&C) activities, and technical documentation.* Prepare inspection reports.* Coordinate with contractors, consultants, and project teams.<br>Requirements<br>* Bachelor’s Degree in Mechanical Engineering.* 7–10 years of relevant experience in construction, MEP, site supervision, or Testing & Commissioning.* Strong knowledge of HVAC, firefighting, and plumbing systems.* Familiarity with Saudi Building Code, NFPA, ASHRAE, and SMACNA.* Fluent in Arabic and English – Mandatory.* Experience in snagging and Testing & Commissioning is a plus.<br>Location<br>Riyadh, Saudi Arabia<br>How to Apply<br>Interested candidates are invited to share their CV via email: info@snaginspectionservices.com<br>Please mention “Mechanical Engineer” when submitting your CV.<br>We look forward to hearing from you!

<p><p class=\"MsoNormal\" style=\"mso-margin-bottom-alt: auto; line-height: normal; mso-outline-level: 3;\"><b><span style=\"font-size: 11.0pt; font-family: \'Arial\',sans-serif; mso-ascii-theme-font: minor-bidi; mso-fareast-font-family: \'Times New Roman\'; mso-hansi-theme-font: minor-bidi; mso-bidi-theme-font: minor-bidi; mso-font-kerning: 0pt; mso-ligatures: none;\">Job Purpose</span></b></p> <p class=\"MsoNormal\" style=\"mso-margin-bottom-alt: auto; line-height: normal;\"><span style=\"font-size: 11.0pt; font-family: \'Arial\',sans-serif; mso-ascii-theme-font: minor-bidi; mso-fareast-font-family: \'Times New Roman\'; mso-hansi-theme-font: minor-bidi; mso-bidi-theme-font: minor-bidi; mso-font-kerning: 0pt; mso-ligatures: none;\">The main purpose of the Port Engineer\'s job is to manage the day-to-day operational readiness, maintenance, repairs, and regulatory compliance of assigned vessels, specifically focusing on high-spec assets like the <i>Rawabi Integrity</i>.</span></p> <p class=\"MsoNormal\" style=\"mso-margin-bottom-alt: auto; line-height: normal; mso-outline-level: 3;\"><b><span style=\"font-size: 11.0pt; font-family: \'Arial\',sans-serif; mso-ascii-theme-font: minor-bidi; mso-fareast-font-family: \'Times New Roman\'; mso-hansi-theme-font: minor-bidi; mso-bidi-theme-font: minor-bidi; mso-font-kerning: 0pt; mso-ligatures: none;\">Principal Accountabilities</span></b></p> <ul style=\"margin-top: 0in;\" type=\"disc\"> <li class=\"MsoNormal\" style=\"mso-margin-bottom-alt: auto; line-height: normal; mso-list: l1 level1 lfo1; tab-stops: list .5in;\"><b><span style=\"font-size: 11.0pt; font-family: \'Arial\',sans-serif; mso-ascii-theme-font: minor-bidi; mso-fareast-font-family: \'Times New Roman\'; mso-hansi-theme-font: minor-bidi; mso-bidi-theme-font: minor-bidi; mso-font-kerning: 0pt; mso-ligatures: none;\">Maintenance Coordination:</span></b><span style=\"font-size: 11.0pt; font-family: \'Arial\',sans-serif; mso-ascii-theme-font: minor-bidi; mso-fareast-font-family: \'Times New Roman\'; mso-hansi-theme-font: minor-bidi; mso-bidi-theme-font: minor-bidi; mso-font-kerning: 0pt; mso-ligatures: none;\"> Supervises and coordinates all vessel maintenance and repair works to ensure they are completed on time and meet required standards.</span></li> <li class=\"MsoNormal\" style=\"mso-margin-bottom-alt: auto; line-height: normal; mso-list: l1 level1 lfo1; tab-stops: list .5in;\"><b><span style=\"font-size: 11.0pt; font-family: \'Arial\',sans-serif; mso-ascii-theme-font: minor-bidi; mso-fareast-font-family: \'Times New Roman\'; mso-hansi-theme-font: minor-bidi; mso-bidi-theme-font: minor-bidi; mso-font-kerning: 0pt; mso-ligatures: none;\">Technical Oversight:</span></b><span style=\"font-size: 11.0pt; font-family: \'Arial\',sans-serif; mso-ascii-theme-font: minor-bidi; mso-fareast-font-family: \'Times New Roman\'; mso-hansi-theme-font: minor-bidi; mso-bidi-theme-font: minor-bidi; mso-font-kerning: 0pt; mso-ligatures: none;\"> Manages the planned maintenance of engine room machinery and equipment, specifically for high-speed offshore support vessels (FOSSV).</span></li> <li class=\"MsoNormal\" style=\"mso-margin-bottom-alt: auto; line-height: normal; mso-list: l1 level1 lfo1; tab-stops: list .5in;\"><b><span style=\"font-size: 11.0pt; font-family: \'Arial\',sans-serif; mso-ascii-theme-font: minor-bidi; mso-fareast-font-family: \'Times New Roman\'; mso-hansi-theme-font: minor-bidi; mso-bidi-theme-font: minor-bidi; mso-font-kerning: 0pt; mso-ligatures: none;\">Asset Reliability:</span></b><span style=\"font-size: 11.0pt; font-family: \'Arial\',sans-serif; mso-ascii-theme-font: minor-bidi; mso-fareast-font-family: \'Times New Roman\'; mso-hansi-theme-font: minor-bidi; mso-bidi-theme-font: minor-bidi; mso-font-kerning: 0pt; mso-ligatures: none;\"> Assesses maintenance needs based on manufacturer and class requirements to identify necessary resources for machinery reliability and power generation systems.</span></li> <li class=\"MsoNormal\" style=\"mso-margin-bottom-alt: auto; line-height: normal; mso-list: l1 level1 lfo1; tab-stops: list .5in;\"><b><span style=\"font-size: 11.0pt; font-family: \'Arial\',sans-serif; mso-ascii-theme-font: minor-bidi; mso-fareast-font-family: \'Times New Roman\'; mso-hansi-theme-font: minor-bidi; mso-bidi-theme-font: minor-bidi; mso-font-kerning: 0pt; mso-ligatures: none;\">Dry Docking &amp; Repairs:</span></b><span style=\"font-size: 11.0pt; font-family: \'Arial\',sans-serif; mso-ascii-theme-font: minor-bidi; mso-fareast-font-family: \'Times New Roman\'; mso-hansi-theme-font: minor-bidi; mso-bidi-theme-font: minor-bidi; mso-font-kerning: 0pt; mso-ligatures: none;\"> Assists in the planning and execution of scheduled maintenance, dry dockings, and wet dockings.</span></li> <li class=\"MsoNormal\" style=\"mso-margin-bottom-alt: auto; line-height: normal; mso-list: l1 level1 lfo1; tab-stops: list .5in;\"><b><span style=\"font-size: 11.0pt; font-family: \'Arial\',sans-serif; mso-ascii-theme-font: minor-bidi; mso-fareast-font-family: \'Times New Roman\'; mso-hansi-theme-font: minor-bidi; mso-bidi-theme-font: minor-bidi; mso-font-kerning: 0pt; mso-ligatures: none;\">Regulatory Compliance:</span></b><span style=\"font-size: 11.0pt; font-family: \'Arial\',sans-serif; mso-ascii-theme-font: minor-bidi; mso-fareast-font-family: \'Times New Roman\'; mso-hansi-theme-font: minor-bidi; mso-bidi-theme-font: minor-bidi; mso-font-kerning: 0pt; mso-ligatures: none;\"> Performs inspections to ensure vessel certifications are up to date and meet classification society, flag state, and Aramco Marine standards.</span></li> <li class=\"MsoNormal\" style=\"mso-margin-bottom-alt: auto; line-height: normal; mso-list: l1 level1 lfo1; tab-stops: list .5in;\"><b><span style=\"font-size: 11.0pt; font-family: \'Arial\',sans-serif; mso-ascii-theme-font: minor-bidi; mso-fareast-font-family: \'Times New Roman\'; mso-hansi-theme-font: minor-bidi; mso-bidi-theme-font: minor-bidi; mso-font-kerning: 0pt; mso-ligatures: none;\">Technical Troubleshooting:</span></b><span style=\"font-size: 11.0pt; font-family: \'Arial\',sans-serif; mso-ascii-theme-font: minor-bidi; mso-fareast-font-family: \'Times New Roman\'; mso-hansi-theme-font: minor-bidi; mso-bidi-theme-font: minor-bidi; mso-font-kerning: 0pt; mso-ligatures: none;\"> Investigates causes of mechanical, equipment, or power system failures and recommends mitigating actions to prevent recurring breakdowns.</span></li> <li class=\"MsoNormal\" style=\"mso-margin-bottom-alt: auto; line-height: normal; mso-list: l1 level1 lfo1; tab-stops: list .5in;\"><b><span style=\"font-size: 11.0pt; font-family: \'Arial\',sans-serif; mso-ascii-theme-font: minor-bidi; mso-fareast-font-family: \'Times New Roman\'; mso-hansi-theme-font: minor-bidi; mso-bidi-theme-font: minor-bidi; mso-font-kerning: 0pt; mso-ligatures: none;\">Personnel Management:</span></b><span style=\"font-size: 11.0pt; font-family: \'Arial\',sans-serif; mso-ascii-theme-font: minor-bidi; mso-fareast-font-family: \'Times New Roman\'; mso-hansi-theme-font: minor-bidi; mso-bidi-theme-font: minor-bidi; mso-font-kerning: 0pt; mso-ligatures: none;\"> Ensures proper handover between incoming and outgoing Chief Engineers and acts as a reliever for Chief Engineers when required.</span></li> <li class=\"MsoNormal\" style=\"mso-margin-bottom-alt: auto; line-height: normal; mso-list: l1 level1 lfo1; tab-stops: list .5in;\"><b><span style=\"font-size: 11.0pt; font-family: \'Arial\',sans-serif; mso-ascii-theme-font: minor-bidi; mso-fareast-font-family: \'Times New Roman\'; mso-hansi-theme-font: minor-bidi; mso-bidi-theme-font: minor-bidi; mso-font-kerning: 0pt; mso-ligatures: none;\">Audit Readiness:</span></b><span style=\"font-size: 11.0pt; font-family: \'Arial\',sans-serif; mso-ascii-theme-font: minor-bidi; mso-fareast-font-family: \'Times New Roman\'; mso-hansi-theme-font: minor-bidi; mso-bidi-theme-font: minor-bidi; mso-font-kerning: 0pt; mso-ligatures: none;\"> Prepares and safeguards maintenance records and documents for flag state, classification society, and ISM surveys.</span></li> </ul> <p class=\"MsoNormal\" style=\"mso-margin-bottom-alt: auto; line-height: normal; mso-outline-level: 3;\"><b><span style=\"font-size: 11.0pt; font-family: \'Arial\',sans-serif; mso-ascii-theme-font: minor-bidi; mso-fareast-font-family: \'Times New Roman\'; mso-hansi-theme-font: minor-bidi; mso-bidi-theme-font: minor-bidi; mso-font-kerning: 0pt; mso-ligatures: none;\">Health &amp; Safety Responsibilities</span></b></p> <ul style=\"margin-top: 0in;\" type=\"disc\"> <li class=\"MsoNormal\" style=\"mso-margin-bottom-alt: auto; line-height: normal; mso-list: l2 level1 lfo2; tab-stops: list .5in;\"><b><span style=\"font-size: 11.0pt; font-family: \'Arial\',sans-serif; mso-ascii-theme-font: minor-bidi; mso-fareast-font-family: \'Times New Roman\'; mso-hansi-theme-font: minor-bidi; mso-bidi-theme-font: minor-bidi; mso-font-kerning: 0pt; mso-ligatures: none;\">Safety Culture:</span></b><span style=\"font-size: 11.0pt; font-family: \'Arial\',sans-serif; mso-ascii-theme-font: minor-bidi; mso-fareast-font-family: \'Times New Roman\'; mso-hansi-theme-font: minor-bidi; mso-bidi-theme-font: minor-bidi; mso-font-kerning: 0pt; mso-ligatures: none;\"> Promotes a positive health and safety culture with a focus on building \"zero tolerance\" for injuries and incidents.</span></li> <li class=\"MsoNormal\" style=\"mso-margin-bottom-alt: auto; line-height: normal; mso-list: l2 level1 lfo2; tab-stops: list .5in;\"><b><span style=\"font-size: 11.0pt; font-family: \'Arial\',sans-serif; mso-ascii-theme-font: minor-bidi; mso-fareast-font-family: \'Times New Roman\'; mso-hansi-theme-font: minor-bidi; mso-bidi-theme-font: minor-bidi; mso-font-kerning: 0pt; mso-ligatures: none;\">Risk Mitigation:</span></b><span style=\"font-size: 11.0pt; font-family: \'Arial\',sans-serif; mso-ascii-theme-font: minor-bidi; mso-fareast-font-family: \'Times New Roman\'; mso-hansi-theme-font: minor-bidi; mso-bidi-theme-font: minor-bidi; mso-font-kerning: 0pt; mso-ligatures: none;\"> Identifies any Health, Safety, or Environmental (HSE) risks and implements measures to mitigate them.</span></li> </ul> <p class=\"MsoNormal\" style=\"mso-margin-bottom-alt: auto; line-height: normal; mso-outline-level: 3;\"><b><span style=\"font-size: 11.0pt; font-family: \'Arial\',sans-serif; mso-ascii-theme-font: minor-bidi; mso-fareast-font-family: \'Times New Roman\'; mso-hansi-theme-font: minor-bidi; mso-bidi-theme-font: minor-bidi; mso-font-kerning: 0pt; mso-ligatures: none;\">Communications and Working Relationships</span></b></p> <ul style=\"margin-top: 0in;\" type=\"disc\"> <li class=\"MsoNormal\" style=\"mso-margin-bottom-alt: auto; line-height: normal; mso-list: l0 level1 lfo3; tab-stops: list .5in;\"><b><span style=\"font-size: 11.0pt; font-family: \'Arial\',sans-serif; mso-ascii-theme-font: minor-bidi; mso-fareast-font-family: \'Times New Roman\'; mso-hansi-theme-font: minor-bidi; mso-bidi-theme-font: minor-bidi; mso-font-kerning: 0pt; mso-ligatures: none;\">Strategic Advising:</span></b><span style=\"font-size: 11.0pt; font-family: \'Arial\',sans-serif; mso-ascii-theme-font: minor-bidi; mso-fareast-font-family: \'Times New Roman\'; mso-hansi-theme-font: minor-bidi; mso-bidi-theme-font: minor-bidi; mso-font-kerning: 0pt; mso-ligatures: none;\"> Advises the Vessel Master on strategic decisions related to all technical activities.</span></li> <li class=\"MsoNormal\" style=\"mso-margin-bottom-alt: auto; line-height: normal; mso-list: l0 level1 lfo3; tab-stops: list .5in;\"><b><span style=\"font-size: 11.0pt; font-family: \'Arial\',sans-serif; mso-ascii-theme-font: minor-bidi; mso-fareast-font-family: \'Times New Roman\'; mso-hansi-theme-font: minor-bidi; mso-bidi-theme-font: minor-bidi; mso-font-kerning: 0pt; mso-ligatures: none;\">Liaison:</span></b><span style=\"font-size: 11.0pt; font-family: \'Arial\',sans-serif; mso-ascii-theme-font: minor-bidi; mso-fareast-font-family: \'Times New Roman\'; mso-hansi-theme-font: minor-bidi; mso-bidi-theme-font: minor-bidi; mso-font-kerning: 0pt; mso-ligatures: none;\"> Interfaces with the Port Captain, service providers (repair workshops), and regulatory bodies to ensure efficient fleet operations.</span></li> <li class=\"MsoNormal\" style=\"mso-margin-bottom-alt: auto; line-height: normal; mso-list: l0 level1 lfo3; tab-stops: list .5in;\"><b><span style=\"font-size: 11.0pt; font-family: \'Arial\',sans-serif; mso-ascii-theme-font: minor-bidi; mso-fareast-font-family: \'Times New Roman\'; mso-hansi-theme-font: minor-bidi; mso-bidi-theme-font: minor-bidi; mso-font-kerning: 0pt; mso-ligatures: none;\">Client Interface:</span></b><span style=\"font-size: 11.0pt; font-family: \'Arial\',sans-serif; mso-ascii-theme-font: minor-bidi; mso-fareast-font-family: \'Times New Roman\'; mso-hansi-theme-font: minor-bidi; mso-bidi-theme-font: minor-bidi; mso-font-kerning: 0pt; mso-ligatures: none;\"> Liaises with clients on new guidelines and is present during all client surveys to ensure contract compliance.</span></li> </ul></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>We are seeking an experienced Resident Engineer (Mechanical) to join a supervision consultancy team for a major infrastructure development project located approximately 100 km north of Jeddah . The selected candidate will oversee all mechanical and utility-related works on site, ensuring compliance with project specifications, quality standards, and approved designs.</p><p>Lead and manage mechanical supervision activities on site as part of the consultant team. Supervise installation and construction of potable water supply networks . Oversee construction and installation of firefighting systems . Supervise works related to gas distribution networks . Monitor installation of stormwater drainage and sanitary sewage systems . Supervise irrigation networks and landscape-related mechanical systems . Coordinate mechanical works with other infrastructure utilities including road networks, power distribution, telecom infrastructure, and street lighting . Ensure all works are executed in accordance with approved drawings, specifications, and international standards . Review and approve shop drawings, material submittents, and method statements submitted by contractors. Monitor project progress, quality, and compliance with health and safety requirements . Prepare and review inspection reports, progress reports, and technical documentation . Resolve technical issues on site and coordinate with the design team when required.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Bachelor s Degree in Mechanical Engineering or equivalent.</li><li>Proven experience in infrastructure supervision projects with engineering consultancy firms .</li><li>Strong experience in potable water networks, firefighting systems, gas distribution, stormwater drainage, and sanitary sewage systems .</li><li>Experience working on multi-utility infrastructure projects .</li><li>Strong leadership, coordination, and site management skills.</li><li>Excellent communication and reporting abilities.</li></ul><p></p></section>

Position Summary The Lead Instrumentation & Control (I&C) Commissioning Engineer represents the Owner during the commissioning phase of a utility-scale Combined Cycle Gas Turbine (CCGT) Power Plant. The role is responsible for providing technical oversight of the EPC Contractor’s Instrumentation & Control commissioning activities, ensuring all work is executed safely, in accordance with the EPC Contract, Owner’s Technical Specifications (OTS), OEM recommendations, project procedures, and applicable international standards.<br>The position focuses on field instrumentation, package control systems, PLCs, Safety Instrumented Systems (SIS), Fire & Gas Systems (F&G), and associated interfaces. The role works closely with the Lead DCS Commissioning Engineer, who has primary responsibility for oversight of the Distributed Control System (DCS), including system architecture, software configuration, networking, and overall control system functionality.<br>The Lead I&C Commissioning Engineer provides technical leadership, identifies commissioning risks, monitors EPC performance, witnesses critical commissioning activities, and supports the successful achievement of project milestones through to Commercial Operation Date (COD).<br>Key Responsibilities Commissioning Oversight Provide technical oversight of the EPC Contractor’s Instrumentation & Control commissioning activities. Monitor commissioning progress to ensure compliance with approved procedures, project schedule, and contractual requirements. Verify commissioning activities are carried out in accordance with the Owner’s Technical Specifications (OTS), EPC Contract, OEM recommendations, and applicable international standards. Witness critical commissioning activities and provide technical recommendations for Owner acceptance. Identify technical risks and recommend mitigation measures to the Commissioning Manager. Monitor EPC Contractor performance and raise concerns regarding quality, safety, schedule, or technical compliance.<br>Engineering & Documentation Review Review and provide technical comments on the EPC Contractor’s:Commissioning Procedures Method Statements Commissioning Schedules Functional Test Procedures Loop Check Procedures Cause & Effect Test Procedures Startup Procedures SAT Documentation Turnover Packages Commissioning Reports Red-Line Drawings As-Built Documentation. Ensure all documentation complies with project requirements before commissioning activities commence.<br>Field Instrumentation Provide technical oversight of commissioning activities related to:Pressure Instruments Temperature Instruments Flow Instruments Level Instruments Analytical Instruments Smart Field Devices Control Valves Motor Operated Valves (MOVs) On-Off Valves Instrument Air Systems Sampling Systems Instrument Calibration Instrument Reinstatement Loop Checking Field Verification Ensure commissioning activities are completed in accordance with approved procedures and project specifications.<br>Package Control Systems Oversee commissioning of package-mounted PLC and local control systems, including but not limited to:Water Treatment Plant Fuel Gas System Air Compressors Fire Protection Systems HVAC Systems Chemical Dosing Systems Diesel Generator Controls Auxiliary Boilers (where applicable) Balance of Plant Packages Verify successful integration between package control systems and the plant DCS.<br>Functional Testing Witness and monitor:Loop Checks Functional Testing Interlock Testing Permissive Testing Cause & Effect Testing Sequence Testing Valve Stroke Testing Instrument Functional Testing Package Interface Testing Integrated System Testing Coordinate closely with the Lead DCS Commissioning Engineer during integrated testing activities.<br>Safety Instrumented Systems (SIS) & Fire & Gas (F&G) Provide technical oversight of:SIS Field Devices Fire & Gas Detection Devices Functional Testing Proof Testing Interface Testing Final Acceptance Testing Ensure compliance with Functional Safety requirements and project specifications.<br>Mechanical Completion & System Turnover Participate in Mechanical Completion inspections. Support Ready for Commissioning (RFC) verification. Participate in system walkdowns. Monitor I&C punch list close-out. Review turnover dossiers. Support System Completion (ECC/TOP) activities. Verify system readiness for Owner acceptance.<br>Startup & Performance Testing Monitor and witness EPC Contractor activities during:Cold Commissioning Hot Commissioning First Energization First Fire First Synchronization Load Rejection Tests Reliability Run Performance Testing Commercial Operation Readiness Provide technical recommendations to the Commissioning Manager regarding system readiness and acceptance.<br>Interface Management Coordinate closely with:Lead DCS Commissioning Engineer Lead Electrical Commissioning Engineer Lead Mechanical Commissioning Engineer Construction Team Engineering Team Quality Team HSE Team Planning & Controls Manager System Completion (ECC/TOP) Team EPC Contractor OEM Representatives Owner’s Engineer LOTO Coordinator. Ensure effective coordination across all commissioning disciplines.<br>Reporting Monitor commissioning progress against the approved schedule. Identify technical issues affecting commissioning progress. Report commissioning risks and recommend mitigation measures. Review of EPC commissioning reports. Prepare Owner observations and recommendations. Support weekly and monthly commissioning progress reporting.<br>Health, Safety & Quality Promote a Zero Harm safety culture. Ensure compliance with project HSE requirements. Verify commissioning activities are conducted under approved Permit-to-Work (PTW) and Lock Out/Tag Out (LOTO) procedures. Ensure compliance with project Quality Management requirements. Promote safe commissioning practices throughout all project phases.<br>Qualifications Bachelor’s Degree in Instrumentation Engineering, Control Engineering, Electrical Engineering, Electronics Engineering, or an equivalent engineering discipline from a recognized university. Professional Engineer (PE), Chartered Engineer (CEng), or equivalent professional registration is desirable. Certification or formal training in Functional Safety (IEC 61511), ISA, or equivalent is considered an advantage. Excellent written and verbal communication skills in English.<br>Experience Minimum 12 years of direct Instrumentation & Control commissioning experience in utility-scale Combined Cycle Gas Turbine (CCGT) power plants. Minimum 5 years of experience as a Lead I&C Commissioning Engineer or in a comparable senior commissioning leadership role. Proven experience in commissioning at least two utility-scale Combined Cycle Power Plants, including one project with an installed capacity of 1,900 MW or greater. Demonstrated experience across the full commissioning lifecycle, including:Construction Support Mechanical Completion Pre-Commissioning Commissioning First Fire First Synchronization Reliability Run Performance Testing Commercial Operation (COD) Previous experience representing the Owner, Owner’s Engineer, or EPC Contractor on major power generation projects. Demonstrated experience in overseeing EPC Contractor commissioning activities and coordinating with OEMs and package vendors. Strong experience with System Completion processes, including Mechanical Completion, Ready for Commissioning (RFC), ECC/TOP, Turnover, and Handover.<br>Technical Competencies Demonstrated experience with:Field Instrumentation Instrument Calibration Loop Checking Smart Instruments Control Valves Motor Operated Valves (MOVs) Instrument Air Systems Package PLC Systems Safety Instrumented Systems (SIS) Fire & Gas Systems (F&G) Turbine Package Interfaces HRSG Instrumentation Balance of Plant Instrumentation Communication Protocols (Modbus, Profibus, Foundation Fieldbus, HART, Ethernet/IP or equivalent) Functional Testing Cause & Effect Verification Interlock Testing System Integration Testing Commissioning Documentation System Turnover and Handover<br>Knowledge Sound knowledge of:Combined Cycle Power Plant systems and operation Commissioning management principles EPC Contract Execution Owner’s Technical Specifications (OTS) OEM commissioning requirements IEC Standards ISA Standards IEEE Standards (as applicable) Functional Safety (IEC 61511) Quality Management Systems (ISO 9001) HSE Management Systems Permit-to-Work (PTW) Lock Out/Tag Out (LOTO)<br>Key Competencies Technical Leadership Commissioning Management Planning and Organizing Analytical Thinking Problem Solving Decision Making Communication and Presentation Skills Stakeholder Management Teamwork and Collaboration Negotiation and Conflict Resolution Attention to Detail Safety Leadership Quality Focus Results Orientation<br>Key Performance Indicators (KPIs) Zero Lost Time Incidents (LTI) are attributable to I&C commissioning activities. I&C commissioning activities completed in accordance with the approved project schedule. Successful completion of all loop checks, functional tests, and integrated system tests. Timely closure of I&C punch list items. Successful completion of startup, synchronization, reliability run, and performance testing milestones. Timely completion of System Completion (ECC/TOP) and Owner handover activities. Effective oversight of EPC Contractor commissioning performance. Timely identification and mitigation of commissioning risks. High-quality commissioning documentation and turnover packages. Positive collaboration with internal stakeholders, EPC Contractor, OEMs, and Owner’s Engineer.

Position Summary The Lead Instrumentation & Control (I&C) Commissioning Engineer represents the Owner during the commissioning phase of a utility-scale Combined Cycle Gas Turbine (CCGT) Power Plant. The role is responsible for providing technical oversight of the EPC Contractor’s Instrumentation & Control commissioning activities, ensuring all work is executed safely, in accordance with the EPC Contract, Owner’s Technical Specifications (OTS), OEM recommendations, project procedures, and applicable international standards.<br>The position focuses on field instrumentation, package control systems, PLCs, Safety Instrumented Systems (SIS), Fire & Gas Systems (F&G), and associated interfaces. The role works closely with the Lead DCS Commissioning Engineer, who has primary responsibility for oversight of the Distributed Control System (DCS), including system architecture, software configuration, networking, and overall control system functionality.<br>The Lead I&C Commissioning Engineer provides technical leadership, identifies commissioning risks, monitors EPC performance, witnesses critical commissioning activities, and supports the successful achievement of project milestones through to Commercial Operation Date (COD).<br>Key Responsibilities Commissioning Oversight Provide technical oversight of the EPC Contractor’s Instrumentation & Control commissioning activities. Monitor commissioning progress to ensure compliance with approved procedures, project schedule, and contractual requirements. Verify commissioning activities are carried out in accordance with the Owner’s Technical Specifications (OTS), EPC Contract, OEM recommendations, and applicable international standards. Witness critical commissioning activities and provide technical recommendations for Owner acceptance. Identify technical risks and recommend mitigation measures to the Commissioning Manager. Monitor EPC Contractor performance and raise concerns regarding quality, safety, schedule, or technical compliance.<br>Engineering & Documentation Review Review and provide technical comments on the EPC Contractor’s:Commissioning Procedures Method Statements Commissioning Schedules Functional Test Procedures Loop Check Procedures Cause & Effect Test Procedures Startup Procedures SAT Documentation Turnover Packages Commissioning Reports Red-Line Drawings As-Built Documentation. Ensure all documentation complies with project requirements before commissioning activities commence.<br>Field Instrumentation Provide technical oversight of commissioning activities related to:Pressure Instruments Temperature Instruments Flow Instruments Level Instruments Analytical Instruments Smart Field Devices Control Valves Motor Operated Valves (MOVs) On-Off Valves Instrument Air Systems Sampling Systems Instrument Calibration Instrument Reinstatement Loop Checking Field Verification Ensure commissioning activities are completed in accordance with approved procedures and project specifications.<br>Package Control Systems Oversee commissioning of package-mounted PLC and local control systems, including but not limited to:Water Treatment Plant Fuel Gas System Air Compressors Fire Protection Systems HVAC Systems Chemical Dosing Systems Diesel Generator Controls Auxiliary Boilers (where applicable) Balance of Plant Packages Verify successful integration between package control systems and the plant DCS.<br>Functional Testing Witness and monitor:Loop Checks Functional Testing Interlock Testing Permissive Testing Cause & Effect Testing Sequence Testing Valve Stroke Testing Instrument Functional Testing Package Interface Testing Integrated System Testing Coordinate closely with the Lead DCS Commissioning Engineer during integrated testing activities.<br>Safety Instrumented Systems (SIS) & Fire & Gas (F&G) Provide technical oversight of:SIS Field Devices Fire & Gas Detection Devices Functional Testing Proof Testing Interface Testing Final Acceptance Testing Ensure compliance with Functional Safety requirements and project specifications.<br>Mechanical Completion & System Turnover Participate in Mechanical Completion inspections. Support Ready for Commissioning (RFC) verification. Participate in system walkdowns. Monitor I&C punch list close-out. Review turnover dossiers. Support System Completion (ECC/TOP) activities. Verify system readiness for Owner acceptance.<br>Startup & Performance Testing Monitor and witness EPC Contractor activities during:Cold Commissioning Hot Commissioning First Energization First Fire First Synchronization Load Rejection Tests Reliability Run Performance Testing Commercial Operation Readiness Provide technical recommendations to the Commissioning Manager regarding system readiness and acceptance.<br>Interface Management Coordinate closely with:Lead DCS Commissioning Engineer Lead Electrical Commissioning Engineer Lead Mechanical Commissioning Engineer Construction Team Engineering Team Quality Team HSE Team Planning & Controls Manager System Completion (ECC/TOP) Team EPC Contractor OEM Representatives Owner’s Engineer LOTO Coordinator. Ensure effective coordination across all commissioning disciplines.<br>Reporting Monitor commissioning progress against the approved schedule. Identify technical issues affecting commissioning progress. Report commissioning risks and recommend mitigation measures. Review of EPC commissioning reports. Prepare Owner observations and recommendations. Support weekly and monthly commissioning progress reporting.<br>Health, Safety & Quality Promote a Zero Harm safety culture. Ensure compliance with project HSE requirements. Verify commissioning activities are conducted under approved Permit-to-Work (PTW) and Lock Out/Tag Out (LOTO) procedures. Ensure compliance with project Quality Management requirements. Promote safe commissioning practices throughout all project phases.<br>Qualifications Bachelor’s Degree in Instrumentation Engineering, Control Engineering, Electrical Engineering, Electronics Engineering, or an equivalent engineering discipline from a recognized university. Professional Engineer (PE), Chartered Engineer (CEng), or equivalent professional registration is desirable. Certification or formal training in Functional Safety (IEC 61511), ISA, or equivalent is considered an advantage. Excellent written and verbal communication skills in English.<br>Experience Minimum 12 years of direct Instrumentation & Control commissioning experience in utility-scale Combined Cycle Gas Turbine (CCGT) power plants. Minimum 5 years of experience as a Lead I&C Commissioning Engineer or in a comparable senior commissioning leadership role. Proven experience in commissioning at least two utility-scale Combined Cycle Power Plants, including one project with an installed capacity of 1,900 MW or greater. Demonstrated experience across the full commissioning lifecycle, including:Construction Support Mechanical Completion Pre-Commissioning Commissioning First Fire First Synchronization Reliability Run Performance Testing Commercial Operation (COD) Previous experience representing the Owner, Owner’s Engineer, or EPC Contractor on major power generation projects. Demonstrated experience in overseeing EPC Contractor commissioning activities and coordinating with OEMs and package vendors. Strong experience with System Completion processes, including Mechanical Completion, Ready for Commissioning (RFC), ECC/TOP, Turnover, and Handover.<br>Technical Competencies Demonstrated experience with:Field Instrumentation Instrument Calibration Loop Checking Smart Instruments Control Valves Motor Operated Valves (MOVs) Instrument Air Systems Package PLC Systems Safety Instrumented Systems (SIS) Fire & Gas Systems (F&G) Turbine Package Interfaces HRSG Instrumentation Balance of Plant Instrumentation Communication Protocols (Modbus, Profibus, Foundation Fieldbus, HART, Ethernet/IP or equivalent) Functional Testing Cause & Effect Verification Interlock Testing System Integration Testing Commissioning Documentation System Turnover and Handover<br>Knowledge Sound knowledge of:Combined Cycle Power Plant systems and operation Commissioning management principles EPC Contract Execution Owner’s Technical Specifications (OTS) OEM commissioning requirements IEC Standards ISA Standards IEEE Standards (as applicable) Functional Safety (IEC 61511) Quality Management Systems (ISO 9001) HSE Management Systems Permit-to-Work (PTW) Lock Out/Tag Out (LOTO)<br>Key Competencies Technical Leadership Commissioning Management Planning and Organizing Analytical Thinking Problem Solving Decision Making Communication and Presentation Skills Stakeholder Management Teamwork and Collaboration Negotiation and Conflict Resolution Attention to Detail Safety Leadership Quality Focus Results Orientation<br>Key Performance Indicators (KPIs) Zero Lost Time Incidents (LTI) are attributable to I&C commissioning activities. I&C commissioning activities completed in accordance with the approved project schedule. Successful completion of all loop checks, functional tests, and integrated system tests. Timely closure of I&C punch list items. Successful completion of startup, synchronization, reliability run, and performance testing milestones. Timely completion of System Completion (ECC/TOP) and Owner handover activities. Effective oversight of EPC Contractor commissioning performance. Timely identification and mitigation of commissioning risks. High-quality commissioning documentation and turnover packages. Positive collaboration with internal stakeholders, EPC Contractor, OEMs, and Owner’s Engineer.

Company Description Building Guide is a Civil Defense-approved engineering and safety consultancy firm specializing in fire safety solutions, safety plan approvals, compliance reports, and certification services. The company supports businesses and facilities in meeting regulatory requirements and obtaining operational licenses efficiently. By focusing on safety, compliance, and sustainability, Building Guide helps clients create secure environments for occupants and operations. The firm offers multidisciplinary engineering expertise and collaborates closely with regulatory authorities to streamline approval processes. Team members contribute to projects that directly impact public safety and regulatory adherence across Saudi Arabia.<br>Role Description The Architectural Engineer role is a full-time, on-site position based in Saudi Arabia. The Architectural Engineer will develop and review architectural designs and plans that align with fire safety regulations, Civil Defense requirements, and overall building codes. Daily responsibilities include coordinating with civil and construction engineers, preparing technical drawings, supporting safety plan approvals, and contributing to compliance documentation and reports. The role involves conducting site visits, assessing existing structures for safety and regulatory conformity, and recommending design modifications or improvements. The Architectural Engineer will collaborate with project managers, consultants, and client representatives to ensure projects are delivered on time, within scope, and in full compliance with local standards.<br>Qualifications<br> Strong foundation in Architecture with experience in building design, codes, and safety-focused layouts. Relevant experience in Civil Engineering and Construction, including coordination with multidisciplinary engineering teams. Proven Project Management skills, with the ability to plan, prioritize, and deliver multiple projects to regulatory deadlines. Demonstrated Teamwork and collaboration skills, with the ability to work effectively with internal teams, clients, and authorities. Bachelor’s degree in Architecture, Architectural Engineering, Civil Engineering, or a related field. Knowledge of fire safety standards, local Saudi building regulations, and Civil Defense requirements is highly beneficial. Proficiency in relevant design and drafting software (e.g., Auto CAD, Revit or similar) and ability to produce accurate technical drawings. Strong analytical, problem-solving, and communication skills, with attention to detail and commitment to safety and compliance. Prior experience in an engineering consultancy or regulatory environment is an advantage.

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>We are seeking an experienced Mechanical Engineer to join the supervision consultancy team for a large-scale infrastructure development project located approximately 100 km north of Jeddah . The selected candidate will assist the Resident Engineer in supervising mechanical and utility works on site, ensuring compliance with project specifications, approved drawings, and quality standards.</p><p>Supervise and monitor mechanical and utility construction works on site in accordance with approved drawings and project specifications. Assist the Resident Engineer (Mechanical) in overseeing mechanical infrastructure works. Inspect and supervise installation of potable water supply networks . Monitor works related to firefighting systems and associated infrastructure . Supervise installation of gas distribution networks . Monitor construction of stormwater drainage and sanitary sewage systems . Supervise installation of irrigation systems and landscape-related mechanical works . Ensure contractor compliance with approved method statements, drawings, and quality standards . Review contractor submissions including shop drawings and material submittals . Conduct site inspections and quality checks to ensure proper construction practices. Assist in preparing inspection reports, site reports, and progress updates . Identify and report technical issues, non-conformances, and delays to the Resident Engineer.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Bachelor s Degree in Mechanical Engineering or equivalent.</li><li>Minimum 8 years of experience in infrastructure construction or supervision projects.</li><li>Experience in utility infrastructure projects including potable water, firefighting, gas distribution, stormwater drainage, sanitary sewage, and irrigation systems.</li><li>Previous experience working with engineering consultancy firms in a supervision capacity is preferred.</li><li>Good knowledge of construction supervision, inspection procedures, and quality control standards .</li><li>Strong coordination, inspection, and reporting skills.</li></ul><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Oversees procurement of mechanical systems, HVAC, firefighting, plumbing, pumps, equipment, and mechanical subcontract packages. Reviews technical specifications, coordinates with suppliers and consultants, evaluates quotations, supports negotiations, and ensures timely delivery of compliant mechanical materials.</p><p> </p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><ul><li>Bachelor’s degree in Mechanical Engineering. </li><li>Experience in mechanical procurement for building or infrastructure projects. </li><li>Strong knowledge of HVAC, plumbing, firefighting systems, BOQs, technical approvals, supplier evaluation, and procurement documentation. </li><li>KSA construction market experience is preferred.</li></ul><p> </p></div>