وظائف مشغل معدات

<p>Install, maintain, and repair electrical wiring, fixtures, equipment, and control systems. Read and interpret electrical drawings, blueprints, and technical diagrams. Diagnose electrical faults and perform troubleshooting to identify and resolve issues. Inspect electrical systems to ensure compliance with safety codes and regulations. Test electrical systems and components using specialized tools and equipment. Replace defective electrical components and wiring. Perform preventive maintenance on electrical equipment. Ensure a safe working environment by following health and safety procedures. Maintain accurate records of work completed, inspections, and maintenance activities. Coordinate with supervisors, engineers, and other trades to complete projects efficiently.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>High school diploma or equivalent; technical or vocational certification in electrical work is preferred.</li><li>Valid electrician license or certification (where required).</li><li>Proven experience as an electrician in residential, commercial, or industrial environments.</li><li>Strong knowledge of electrical systems, wiring, and safety regulations.</li><li>Ability to read electrical schematics and blueprints.</li><li>Proficiency in using electrical testing and diagnostic equipment.</li><li>Good problem-solving and troubleshooting skills.</li><li>Physical ability to work at heights, in confined spaces, and lift heavy equipment.</li><li>Strong communication and teamwork skills</li></ul>

<p>To carry out field-based mechanical maintenance, installation, and repair of equipment such as pumps and related systems, ensuring safe operation, proper functioning, and timely completion of service assignments.</p><p>Perform field service activities including installation, dismantling, and assembly of mechanical equipment. Carry out maintenance and repair of pumps, pipelines, valves, and related systems.Use hand tools, chain wrenches, and mechanical equipment for service work. Troubleshoot and support resolution of mechanical system issues at site locations. Assist with drilling and other site-related mechanical operations when required. Transport, handle, and manage tools, equipment, and materials at work sites. Work in outdoor environments under varying weather conditions. Ensure proper functioning of equipment after maintenance or repair. Follow technical instructions, safety procedures, and maintenance standards. Maintain cleanliness and organization of tools and work areas. Complete assigned field tasks safely, efficiently, and within timelines.</p><p><strong>Desired Candidate Profile</strong></p><p>Minimum 3 5 years of experience in mechanical maintenance, field service, or equipment installation. Experience using hand tools, chain wrenches, and mechanical service equipment. Knowledge of pumps, pipelines, valves, and water-related mechanical systems. Ability to understand basic technical drawings and maintenance instructions. Technical Diploma or equivalent qualification in Mechanical Engineering or related field (preferred). Physically fit and capable of performing outdoor and field-based mechanical work.</p>

<h3 >About YES Machinery</h3> <p >YES Machinery is a comprehensive provider of machinery solutions, specializing in products for steel fabrication, lifting and material handling, industrial solutions, and industrial cleaning. The company focuses on delivering practical machines and tailored solutions designed to enhance productivity, safety, and efficiency for industrial clients.</p> <h3 >The Role of Service Technician</h3> <p >YES Machinery is seeking a <strong >Service Technician</strong> to join its team in Dammam, Eastern Region. This full-time position is suitable for candidates with 0-1 years of experience who are prepared to provide essential technical support and maintenance for industrial machinery.</p> <h3 >Key Responsibilities</h3> <ul > <li >Perform installation, commissioning, demonstration, troubleshooting, maintenance, repair, and servicing of industrial machinery.</li> <li >Execute machine setup, alignment, calibration, testing, and commissioning procedures.</li> <li >Diagnose and rectify mechanical, hydraulic, pneumatic, electrical, and basic control-system faults.</li> <li >Respond to customer breakdowns and carry out both preventive and corrective maintenance.</li> <li >Provide technical support and basic machine/operator training to customers.</li> <li >Prepare comprehensive service reports and coordinate effectively with customers, suppliers, and internal teams.</li> </ul> <h3 >Qualifications and Skills</h3> <ul > <li >Diploma or ITI qualification in Mechanical, Electrical, Mechatronics, or a related technical field.</li> <li >Strong knowledge of mechanical, hydraulic, pneumatic, electrical, and basic automation systems.</li> <li >Familiarity with components such as motors, pumps, gearboxes, bearings, hydraulic valves/cylinders, pneumatic systems, VFDs, sensors, relays, contactors, and control panels.</li> <li >Ability to read and interpret technical drawings, electrical schematics, hydraulic/pneumatic circuits, and machine manuals.</li> <li >Demonstrated troubleshooting and problem-solving skills.</li> <li >Familiarity with basic diagnostic tools, including multimeters and pressure gauges.</li> <li >Good understanding of machine safety systems and safe maintenance practices.</li> </ul> <h3 >Work Environment and Additional Requirements</h3> <p >This full-time role requires a <strong >valid Saudi Driving License</strong>. The successful candidate must be willing to travel across Saudi Arabia and perform work at various customer sites as needed.</p> <h3 >Advantageous Experience</h3> <p >Experience with the following types of industrial machinery will be considered an advantage:</p> <ul > <li >Machine tools, CNC machines, press brakes, shearing machines, laser cutting machines.</li> <li >Rolling machines, drilling machines, waterjet machines, welding equipment.</li> <li >Industrial cleaning equipment, vacuum lifting systems, material handling equipment, or similar industrial machinery.</li> </ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span> Division: <span>Sports and Entertainment</span><br> <br> <br> <br> Department: GALAXEA<br> <br> <br> <br> Company: <span>Sports and Entertainment Company</span><br> <br> <br> <br> <br> From Land to Sea – Active Experiences in Nature’s Purest Form <br> <br> </span><p><strong>Red Sea Sports s Entertainment (RSSE)&nbsp;</strong>is a dedicated subsidiary of&nbsp;<strong>Red Sea Global (RSG)</strong>, responsible for designing and delivering outstanding land and marine experiences at&nbsp;<strong>The</strong><strong>&nbsp;Red Sea destination</strong>. RSSE manages and operates a diverse portfolio of sports, adventure, and leisure</p><br><br> <p>offerings, including water sports through&nbsp;<strong>Galaxea</strong>, adventure activities via&nbsp;<strong>Akun</strong>, and leisure experiences delivered by&nbsp;<strong>WAMA</strong>.</p><br><br> <br> <br> <p>RSSE plays a key strategic role in the partnership between&nbsp;<strong>Red Sea Global&nbsp;</strong>and the&nbsp;<strong>Saudi Olympic s Paralympic Committee</strong>, united by a shared ambition to promote inclusive, accessible, and world-class sports and recreational experiences.</p><br><br> <br> <br> <p>Guided by a purpose-driven approach and a strong commitment to people and the planet, RSSE delivers innovative programs aligned with&nbsp;<strong>Saudi Vision 2030</strong>, supporting the Kingdom’s ambition to become a global leader in regenerative tourism.</p><br><br> <br> <br> <br> <br> <br> <br> &nbsp; <span><strong>Job Purpose</strong></span> <p>The Dive Center Divemaster is a site-based operational role within the GALAXEA department, responsible for supporting the daily operations of dive centers across The Red Sea and AMAALA destinations. The role leads guided dives, assists in the delivery of PADI courses, and supports the Dive Center Manager in ensuring the safe, efficient, and professional operation of all diving and underwater tourism activities.</p><br><br> <p>The Dive Center Divemaster plays a key role in delivering exceptional guest experiences by maintaining high operational standards, preparing dive facilities and equipment, supporting dive-related retail activities, and ensuring all operations are conducted in accordance with PADI standards, company procedures, and safety, quality, environmental, and service excellence requirements.</p><br><br> <span><strong>Key Responsibilities</strong></span> <ul> <li>Support the Dive Center Manager in the daily operation of the assigned dive center.</li> <li>Lead guided dives safely and professionally in accordance with PADI standards and GALAXEA operating procedures.</li> <li>Assist with the delivery of PADI courses, ensuring high-quality instruction and guest support.</li> <li>Prepare dive boats, equipment, guest areas, and teaching environments to ensure operational readiness.</li> <li>Conduct professional guest briefings and debriefings before and after diving activities.</li> <li>Ensure all diving activities are delivered safely, consistently, and in line with company service standards.</li> <li>Inspect, prepare, clean, and maintain diving equipment, cylinders, and related assets to ensure operational readiness.</li> <li>Assist with cylinder filling, equipment management, dive center housekeeping, and facility presentation.</li> <li>Support retail operations by promoting dive products, courses, and underwater experiences to guests.</li> <li>Build positive relationships with guests, colleagues, hotel operators, and other stakeholders to deliver an exceptional customer experience.</li> <li>Collaborate with Sustainability, SEZ, and relevant departments to ensure compliance with environmental and marine conservation requirements.</li> <li>Maintain accurate dive logs, guest records, certification documentation, equipment records, and operational reports.</li> <li>Comply with all GALAXEA, RSG, destination-specific policies, procedures, and Standard Operating Procedures.</li> <li>Apply safety, quality, and environmental management practices to protect guests, employees, marine environments, and company assets.</li> <li>Identify opportunities to improve operational efficiency, guest satisfaction, safety, and service delivery.</li> <li>Perform additional duties as assigned by the Dive Center Manager.</li> </ul> <span><strong>Job Requirements</strong></span> <span><strong>Skills &amp; Experience</strong></span> <ul> <li>Current and renewed PADI Divemaster certification.</li> <li>Minimum of <strong>250 logged dives</strong> across a variety of diving environments.</li> <li>Good knowledge of PADI standards, courses, documentation, and operational procedures.</li> <li>Experience working in a commercial dive centre or resort environment.</li> <li>Strong understanding of dive safety, emergency procedures, and operational risk management.</li> <li>Practical experience in dive equipment preparation, inspection, and basic maintenance.</li> <li>Experience supporting guided dives and PADI training programmes.</li> <li>Knowledge of marine conservation and responsible diving practices.</li> <li>Valid <strong>Fit to Dive Medical Certificate</strong>.</li> <li>Hospitality or guest service experience is preferred.</li> </ul> <span><strong>Personal Attributes</strong></span> <ul> <li>Excellent written and spoken English; Arabic or an additional language is an advantage.</li> <li>Positive, professional, and guest-focused attitude.</li> <li>Strong interpersonal and communication skills.</li> <li>Passion for delivering safe and memorable diving experiences.</li> <li>Good organisational and time management skills.</li> <li>High attention to detail and commitment to safety.</li> <li>Adaptable and able to work effectively in a multicultural team.</li> <li>Self-motivated with the ability to work independently and take initiative.</li> <li>Professional appearance and conduct at all times.</li> <li>Proficient in Microsoft Office and basic administrative tasks.</li> <li>Ability to deliver engaging guest briefings and provide outstanding customer service.</li> <li>Commitment to environmental stewardship and the protection of the marine environment.</li> </ul> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> No experience required </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

<p><b>Key Responsibilities: </b><br>Supervise electrical installation works for the renovation of a high-rise, five-star hotel. <br>Ensure all electrical works comply with approved drawings, project specifications, the Saudi Electrical Code, NFPA standards, and hotel operator requirements. <br>Review electrical shop drawings, material submittals, method statements, panel schedules, load calculations, and single-line diagrams. <br>Supervise the installation of medium-voltage and low-voltage systems, transformers, switchgear, distribution panels, generators, UPS systems, and emergency power supplies. <br>Oversee lighting, small power, earthing, lightning protection, cable containment, and electrical distribution systems. <br>Coordinate fire alarm, emergency lighting, and other electrical life-safety systems with relevant disciplines. <br>Coordinate with architectural and interior design teams to ensure the proper integration of lighting fixtures, outlets, switches, control panels, and electrical equipment. <br>Resolve clashes between existing electrical infrastructure and new architectural, interior, and MEP installations. <br>Inspect electrical materials and equipment upon delivery and verify compliance with approved submittals. <br>Conduct site inspections, identify defective or non-compliant work, and monitor corrective actions. <br>Witness electrical testing, commissioning, energization, and performance verification before handover. <br>Review testing reports, as-built drawings, operation and maintenance manuals, warranties, and handover documentation. <br>Coordinate with the client, hotel operator, consultants, contractors, utility providers, and specialist subcontractors. <br>Monitor progress and report technical issues, safety concerns, risks, and delays to the Project Manager.</p><p><strong>Desired Candidate Profile</strong></p><p>Minimum Requirements: <br>Bachelor s degree in Electrical Engineering from an accredited university. <br>Valid Saudi Council of Engineers membership is mandatory. <br>Minimum 15 years of experience in electrical installation and construction supervision. <br>Proven experience in high-rise buildings, five-star hotels, luxury hospitality developments, or major hotel renovation projects. <br>Strong experience in medium-voltage and low-voltage distribution, generators, UPS systems, lighting, emergency power, and life-safety systems. <br>Experience in testing, commissioning, and energization of electrical systems. <br>Strong knowledge of the Saudi Electrical Code, Saudi Building Code, NFPA requirements, and applicable international standards. <br>Familiarity with luxury hospitality brand standards and electrical requirements for guestrooms, public areas, and back-of-house facilities. <br>Previous experience working with an engineering consultancy or construction supervision consultant. <br>Ability to review electrical drawings, load calculations, panel schedules, technical submittals, and coordination documents. <br>Proficiency in AutoCAD, Revit, BIM coordination, and relevant electrical engineering software. <br>Experience in high-rise refurbishment and working with existing electrical infrastructure is strongly preferred. <br>Experience in Madinah Central Area or similarly sensitive urban locations is preferred. <br>PMP or an equivalent professional qualification is preferred. <br>Fluency in written and spoken English is mandatory; Arabic is preferred.</p>

<h3 >About Bureau Veritas and the Opportunity</h3> <p >Bureau Veritas is a global leader in Testing, Inspection, and Certification (TIC) services, dedicated to helping clients address growing challenges in quality, safety, environmental protection, and social responsibility. We are seeking a <strong >Senior Maintenance Supervisor</strong> for our Mineral Solutions division. This is a contract position based in Jeddah, Makkah, Saudi Arabia, suitable for professionals with 5-10 years of relevant experience.</p> <h3 >Role Purpose and Scope</h3> <p >The Senior Maintenance Supervisor is responsible for planning, coordinating, and supervising all preventive and corrective maintenance activities within the laboratory environment. This role ensures the safe, reliable, and efficient operation of laboratory equipment, facilities, and utilities. The supervisor leads the maintenance team, addresses equipment breakdowns promptly, and coordinates with external service providers to minimize operational downtime and maintain high standards of equipment performance and safety.</p> <h3 >Key Responsibilities</h3> <ul > <li >Plan, coordinate, and supervise preventive and corrective maintenance activities for laboratory equipment, facilities, and utilities.</li> <li >Ensure prompt resolution of equipment breakdowns to minimize operational downtime.</li> <li >Supervise maintenance for sample preparation, Fire Assay, Wet chemistry equipment, and laboratory support systems such as air compressors, dust, and lead collection systems.</li> <li >Monitor equipment performance and identify maintenance requirements proactively.</li> <li >Coordinate and oversee maintenance work performed by contractors, suppliers, and external service providers.</li> <li >Ensure all maintenance activities are completed safely and efficiently, in accordance with company procedures.</li> <li >Formulate and maintain traceable equipment records, logs, inspection reports, and work orders.</li> <li >Conduct training and competency assessments for the maintenance team.</li> <li >Perform routine inspections of equipment, facilities, and utilities to identify defects and cost-effective improvement opportunities.</li> <li >Monitor and maintain spare parts inventory, initiating procurement requests when required.</li> <li >Support the installation, commissioning, relocation, and upgrading of laboratory equipment.</li> <li >Investigate recurring equipment failures and recommend and implement corrective actions to improve reliability.</li> <li >Plan and coordinate maintenance shutdowns and major repairs.</li> <li >Ensure proper housekeeping and maintenance standards are upheld throughout the laboratory and support facilities.</li> </ul> <h3 >Qualifications and Experience</h3> <ul > <li ><strong >Education:</strong> A Diploma or Bachelor’s degree in Mechanical, Electrical, Electromechanical Engineering, or a related technical field is preferred.</li> <li ><strong >Experience:</strong> Minimum of 4 years of experience in mechanical and electrical maintenance, preferably within a laboratory environment.</li> </ul> <h3 >Required Skills and Knowledge</h3> <ul > <li >Ability to read and understand technical drawings and specifications.</li> <li >Knowledge of mechanical and electrical maintenance systems relevant to laboratory environments.</li> <li >Proficiency in troubleshooting and problem-solving.</li> <li >Awareness of preventive maintenance principles and equipment reliability.</li> </ul> <h3 >Work Environment and Safety Standards</h3> <p >This contract role is based in Jeddah, Makkah. The position may require working during night shifts, weekends, or providing support in emergency situations as dictated by operational requirements and in accordance with labor regulations.</p> <p >As a member of Bureau Veritas, the Senior Maintenance Supervisor is also responsible for upholding stringent Quality, Health, Safety, Security, and Environmental (QHSSE) standards:</p> <ul > <li >Comply with Bureau Veritas HSE policies, procedures, and legal requirements.</li> <li >Maintain a safe, clean, and hazard-free workplace, reporting any hazards, incidents, or unsafe conditions.</li> <li >Take responsibility for personal and team health and safety.</li> <li >Participate in HSE initiatives, investigations, and risk control measures.</li> <li >Cooperate with all safety requirements and promote a positive safety culture.</li> </ul>

<p>Under general supervision, performs all phases of the rigging up and down of service line equipment on work locations both on and offshore. Provides the planning necessary for the job including equipment set up, well site direction, and customer related support activities. Responsible for the activities relative to maintaining, setting up, testing, and operating equipment at the customer location and field camp. Monitors instruments and performs necessary calculations to ensure quality of the data at well. Consults with customers concerning services and products, promotes good customer relations at the well site, and ensures customer satisfaction with results. Checks and verifies equipment as per job plan, properly maintains equipment and completes all job documentation. Conducts pre- job toolbox safety meetings, reviews and verifies job plan with customer representative and manages any changes required.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Skills are acquired through completion of a high school diploma and 6+ years experience in oil field drilling activities including 4+ years of underbalanced drilling and/or managed pressure drilling.</li><li>Must have met the minimum competency requirements for Svc Spec II-GBA.</li><li>The ability to perform basic mathematical calculations is required.</li><li>Basic reading comprehension and writing skills are required.</li></ul>

<p>Key Responsibilities: Operate and program Coordinate Measuring Machine (CMM) equipment. Perform dimensional inspections on machined and fabricated components. Read and interpret engineering drawings, technical specifications, and GD&amp;T. Generate and maintain inspection reports. Identify and report non-conforming products. Collaborate with Production and Quality teams to ensure product compliance. Maintain CMM equipment and ensure proper calibration practices.</p><p><strong>Desired Candidate Profile</strong></p><div>Diploma or Bachelor's degree in Mechanical Engineering, Manufacturing, or a related field. 10 years experience with CMM software PC-DMIS. Experience in precision machining, aerospace, or defense manufacturing is an advantage. Familiarity with AS9100 quality standards. Proven experience operating CMM equipment. Strong understanding of engineering drawings and GD&amp;T. Proficient in using precision measuring instruments (Micrometers, Vernier Calipers, Height Gauges, etc.). Skills Strong attention to detail and commitment to quality. Excellent analytical and problem-solving skills. Ability to interpret engineering drawings and GD&amp;T accurately. Experience with CMM programming and inspection software. Good communication and teamwork skills. Ability to work independently and manage inspection priorities. Proficiency in Microsoft O ice (Excel, Word, Outlook). Knowledge of CNC machining processes and manufacturing tolerances is a plus. Willingness to work in a fast-paced manufacturing environment.</div>

<h3 >About TASNEE</h3> <p >TASNEE is seeking a dedicated <strong >Technician VI Instrument</strong> to join its operations. This full-time role is based in <strong >Jubail, Eastern, Saudi Arabia</strong>, contributing to the maintenance and reliability of critical instrumentation systems.</p> <h3 >Role Summary</h3> <p >The Instrument Technician is primarily responsible for executing preventive maintenance (PM) and corrective maintenance (CM) activities for instrument equipment. This position requires a strong foundation in instrumentation skills, focusing on effective troubleshooting and maintenance practices to ensure operational continuity.</p> <h3 >Key Responsibilities</h3> <ul > <li >Perform preventive maintenance on instrument equipment.</li> <li >Issue and close work permits in accordance with operational procedures.</li> <li >Conduct troubleshooting and repair of instrument equipment.</li> <li >Utilize SAP for closing and updating assigned work orders.</li> <li >Assume leadership tasks at a lead technician level when required.</li> <li >Adhere to Health, Safety, and Environment (HSE) regulations and guidelines to ensure a safe working environment.</li> <li >Review and contribute to the improvement of preventive maintenance procedures for all assigned equipment.</li> </ul> <h3 >Technical Competencies</h3> <ul > <li >Proficiency in instrumentation skills related to preventive maintenance and troubleshooting.</li> <li >Experience with hard communicator or transmitter calibration.</li> <li >Knowledge of Safety Instrumented Level (SIL) testing.</li> <li >Familiarity with Programmable Logic Controllers (PLC).</li> </ul> <h3 >Experience Requirements</h3> <p >Candidates must possess <strong >2-5 years of relevant experience</strong> in an instrumentation role, demonstrating proficiency in the duties and technical competencies outlined above.</p> <h3 >Work Location</h3> <p >This full-time position is based in <strong >Jubail, Eastern, Saudi Arabia</strong>. The role operates within an environment that prioritizes adherence to strict HSE standards to maintain safety and efficiency.</p>

<h3 >About Bureau Veritas and the Opportunity</h3> <p >Bureau Veritas is a global leader in Testing, Inspection, and Certification (TIC) services, dedicated to helping clients address growing challenges in quality, safety, environmental protection, and social responsibility. We are seeking a <strong >Senior Maintenance Supervisor</strong> for our Mineral Solutions division. This is a contract position based in Jeddah, Makkah, Saudi Arabia, suitable for professionals with 5-10 years of relevant experience.</p> <h3 >Role Purpose and Scope</h3> <p >The Senior Maintenance Supervisor is responsible for planning, coordinating, and supervising all preventive and corrective maintenance activities within the laboratory environment. This role ensures the safe, reliable, and efficient operation of laboratory equipment, facilities, and utilities. The supervisor leads the maintenance team, addresses equipment breakdowns promptly, and coordinates with external service providers to minimize operational downtime and maintain high standards of equipment performance and safety.</p> <h3 >Key Responsibilities</h3> <ul > <li >Plan, coordinate, and supervise preventive and corrective maintenance activities for laboratory equipment, facilities, and utilities.</li> <li >Ensure prompt resolution of equipment breakdowns to minimize operational downtime.</li> <li >Supervise maintenance for sample preparation, Fire Assay, Wet chemistry equipment, and laboratory support systems such as air compressors, dust, and lead collection systems.</li> <li >Monitor equipment performance and identify maintenance requirements proactively.</li> <li >Coordinate and oversee maintenance work performed by contractors, suppliers, and external service providers.</li> <li >Ensure all maintenance activities are completed safely and efficiently, in accordance with company procedures.</li> <li >Formulate and maintain traceable equipment records, logs, inspection reports, and work orders.</li> <li >Conduct training and competency assessments for the maintenance team.</li> <li >Perform routine inspections of equipment, facilities, and utilities to identify defects and cost-effective improvement opportunities.</li> <li >Monitor and maintain spare parts inventory, initiating procurement requests when required.</li> <li >Support the installation, commissioning, relocation, and upgrading of laboratory equipment.</li> <li >Investigate recurring equipment failures and recommend and implement corrective actions to improve reliability.</li> <li >Plan and coordinate maintenance shutdowns and major repairs.</li> <li >Ensure proper housekeeping and maintenance standards are upheld throughout the laboratory and support facilities.</li> </ul> <h3 >Qualifications and Experience</h3> <ul > <li ><strong >Education:</strong> A Diploma or Bachelor’s degree in Mechanical, Electrical, Electromechanical Engineering, or a related technical field is preferred.</li> <li ><strong >Experience:</strong> Minimum of 4 years of experience in mechanical and electrical maintenance, preferably within a laboratory environment.</li> </ul> <h3 >Required Skills and Knowledge</h3> <ul > <li >Ability to read and understand technical drawings and specifications.</li> <li >Knowledge of mechanical and electrical maintenance systems relevant to laboratory environments.</li> <li >Proficiency in troubleshooting and problem-solving.</li> <li >Awareness of preventive maintenance principles and equipment reliability.</li> </ul> <h3 >Work Environment and Safety Standards</h3> <p >This contract role is based in Jeddah, Makkah. The position may require working during night shifts, weekends, or providing support in emergency situations as dictated by operational requirements and in accordance with labor regulations.</p> <p >As a member of Bureau Veritas, the Senior Maintenance Supervisor is also responsible for upholding stringent Quality, Health, Safety, Security, and Environmental (QHSSE) standards:</p> <ul > <li >Comply with Bureau Veritas HSE policies, procedures, and legal requirements.</li> <li >Maintain a safe, clean, and hazard-free workplace, reporting any hazards, incidents, or unsafe conditions.</li> <li >Take responsibility for personal and team health and safety.</li> <li >Participate in HSE initiatives, investigations, and risk control measures.</li> <li >Cooperate with all safety requirements and promote a positive safety culture.</li> </ul>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Operate Maintain, Repairs and does necessary adjustment for all electrical equipment and systems including Fire Alarm, Motor Control Centers electrical interconnectivity with 3rd party systems. Assist Fire Alarm contractors on scheduled maintenance and briefs them on the condition of the equipment. Ensures of sufficient stock of spare parts available for the electrical equipment and thoroughly checks the purchased materials for their quality. Executes energy saving measures and helps the department to reduce the energy cost. Carryout daily checks on Lighting control, Power system, Electrical service rooms (MV/ LV), Energy Meters, Transformer Rooms, Fire Pump Rooms, Room Management System, Water Tank systems, BMS system ensuring and all set parameters as desired for intended operation. Familiarizes himself with total layout of the building and estate regarding safety aspects such as isolation points, etc. Performs preventive maintenance work on for the electrical equipment and maintains service / history reports. Attends to repair and maintain Electrical Service System Advises improvements to the present system in order to optimize the operating efficiency and economy of the said system. Assists supervisor to prepare spare parts lists for the electrical equipment Attends to repair and maintain general mechanical systems. Participates in the Hotel Energy Conservation Program. Ensures that the plant room, workshop and related areas are kept in clean and tidy condition. Also to do breakdown service in guest rooms, Servicing and maintenance of public area electrical equipments. Carries out occasional repair work as required, following specifications and handles any unexpected problems Prevents problems from occurring in the hotel's technical installations Follows the preventive maintenance program. To assist in carrying out monthly inventory of operating equipment. To carry out any other reasonable duties and responsibilities as assigned. To undertake Duties of the Electrical Technician as per the Engineer Duty Roster</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>NA</p><p></p></section>

<h3 >About the Role</h3> <p >Eram Talent is seeking an Electro-Mechanical Technician to join Saher Flow Solutions in Saudi Arabia. This full-time role involves supporting various technical activities, including fabrication, assembly, testing, maintenance, and troubleshooting of electrical and mechanical systems.</p> <h3 >Role Overview</h3> <p >The Electro-Mechanical Technician will work with workshop and laboratory equipment, electrical and mechanical systems, CNC parts, and various engineering tools. The position requires a dependable individual capable of ensuring operational efficiency and compliance with safety standards.</p> <h3 >Key Responsibilities</h3> <ul > <li >Support the fabrication and assembly of metallic and non-metallic components.</li> <li >Assist with CNC machine parts sourcing and manufacturing requirements.</li> <li >Assemble, test, troubleshoot, and maintain electrical and mechanical systems.</li> <li >Perform equipment maintenance, testing, and maintain related records.</li> <li >Operate workshop tools and equipment safely and efficiently.</li> <li >Support pipe fitting, hydrostatic pressure testing, and equipment servicing.</li> <li >Coordinate with suppliers and contractors for equipment repair and servicing.</li> <li >Maintain asset and tool records, including tagging and movement tracking.</li> <li >Ensure compliance with health, safety, and workshop standards.</li> </ul> <h3 >Qualifications and Requirements</h3> <ul > <li >DAE/Diploma in Electrical, Mechanical, or a relevant Engineering field.</li> <li >Practical experience in fabrication, assembly, and maintenance activities.</li> <li >Good knowledge of power tools, lathe machines, laser cutters, grinders, and drilling machines.</li> <li >Knowledge of pipe fitting and hydrostatic pressure testing.</li> <li >Experience operating engineering workshop equipment.</li> <li >Ability to troubleshoot electrical and mechanical equipment.</li> </ul> <h3 >Preferred Skills</h3> <ul > <li >Forklift operation experience is an advantage.</li> <li >Experience with 3D printers is a plus.</li> <li >Good teamwork, communication, and multitasking skills.</li> </ul> <h3 >Application Process</h3> <p >Candidates who meet the above requirements are encouraged to apply for this full-time Electro-Mechanical Technician position with Eram Talent.</p>

<p>The Assistant Driller works under the Driller supervision to direct, support and take part in various activities to fulfil the drilling/work-over program. Their responsibilities include maintaining and preparing rig floor equipment and tools for use, overseeing drilling crew activities, assisting in handling drill pipe or casing, monitoring &amp; reporting changes in drilling mud characteristics and ensuring proper housekeeping, in a timely manner considering the safety of personnel, the environment, and equipment to maximize drilling operation efficiency. <strong>Roles &amp; Responsibilities:</strong> <strong>General Duties:</strong> Support the Driller in all aspects of the drilling operation and rig floor activities, supervise and train junior crew members (Derrick Men Floor Men Roustabouts). Assists in the operation and preparation of drilling equipment and machinery. Helps with the rig preparation, equipment assembly and perform routine inspections, Cleans and lubricates equipment, identifies equipment that may require repair or replacement and reports for necessary actions to be taken. <strong>Rig Operations:</strong> Arranges the proper drill string &amp; cross-over subs sizes &amp; equipment for continuous drilling / work-over operations. Arranges bottom hole assemblies and coordinates with Derrick-man drill string and drill collar changes during the "pulling out" and the "running in" of a drill string. Directs drifting and measuring of pipes to ensure similarity and correct dimensions and informs the Driller of any variances &amp; maintain records for drilling &amp; servicing operations. Assists in preparing all tools and equipment required for well operations Including. Drifting tubulars and maintaining accurate records of all tubular runs in the hole including pipe tally records. Recording BHA/completion components and trip sheets. Assists and relieves the Driller as necessary in supervising all drilling / workover operations conducted on the unit, ensuring that such work is carried out efficiently and in compliance with ADES approved operating procedures. Assists in Nipping up/down BOP as required. Assists with drill pipe and casing operation &amp; monitors any change in drilling parameters to facilitate the drilling/workover process. Ensures safe handling of pipe, tongs, slips, breaking and correct make-up of connections. Slip and cut and restringing of the drilling line. Takes necessary actions to correct hazardous conditions &amp; practices. <strong>Mud Circulating System:</strong> Monitors and maintains the drilling fluid circulation system, fluid lines, shale shakers and trip tanks &amp; ensures proper handling of the drilling fluid products. Advises the Driller of any significant changes in drilling mud characteristics or mud levels and loss of circulation immediately. Observes the mud flow and check materials needed for "pre-kick" conditions and informs the Driller of potential problems that could occur during the operation. Advises the usage of mud chemicals, drilling fluids, and cement slurries for Driller's calculation and input for the morning drilling report so that appropriate corrective actions can be taken whenever necessary. <strong>Well Control:</strong> Operates and maintains well control equipment, ensuring it is in proper working order and ready for immediate use. Monitor for any down hole irregularities such as kicks, pressure fluctuations, and abnormal torque. Take immediate action to secure the well in the event of a well control incident and promptly inform the Toolpusher and client representative. Receives comprehensive training in well control procedures and techniques to enhance knowledge and ability. Communicates effectively with the drilling crew and well control team, exchanging information and coordinating actions during well control operations. Ensures strict compliance with safety standards and protocols to prioritize the safety of personnel and the integrity of the well during well control operations. <strong>Materials &amp; Equipment:</strong> Follows up all assembly of equipment instrumentation tools or records set up in good conditions to create correct working practices &amp; inspect machinery &amp; tools for any defects &amp; make necessary repairs or replacements. Assists with maintenance, repair, or replacement tasks following the company's planned PMS. Receives and follows up Driller's instructions for the repair and maintenance of various drilling equipment such as mud mixer, shale shaker, distiller, and de-sander etc. Assists Derrick Man in maintaining mud system equipment. Arranges to adjust shale shaker screens and supervises the handling, maintenance, and storage of all drill string components. Directs the greasing, cleaning, painting and routine maintenance of all drilling equipment to ensure its reliability. Directs and participates in replacing the draw work brake bands, adjusting clutches. Supervision of the washing and painting of rig floor, substructures, stairways, and machinery to remove grease or oil spills to ensure a proper clean working space. Report to the supervisor the machinery and equipment requiring repair or replacement to avoid any equipment malfunction. <strong>Working at Heights:</strong> Adheres to and supervises the safety protocols so all consistently wear the necessary personal protective equipment (PPE) when working at elevated heights. Conducts thorough risk assessments and hazard evaluations prior to engaging in tasks performed at elevated locations. Regularly inspects and verifies the proper functioning of equipment related to working at heights. Possesses knowledge about fall protection systems and demonstrates proficiency in their proper usage. Effectively communicates any identified hazards or safety concerns to the team, promoting an initiative-taking safety culture. Actively contributes to the ongoing improvement of safety measures, providing suggestions and feedback to enhance overall safety standards. <strong>Rig Move &amp; Related Activities:</strong> Oversee the drilling crew in the preparation of the rig move checklist and the setup of the drill floor, tanks, cantilever, and main deck. This involves securely lashing movable equipment, disconnecting and securing lines, and repositioning equipment to prevent hazards or damage to the rig while maintaining stability during the move. Actively participate in rig move operations, ensuring the removal of all pipes and obstructions before the skidding of the derrick and cantilever deck takes place.&nbsp;</p><p><strong>Desired Candidate Profile</strong></p><p><strong>Education &amp; Experience:</strong> Minimum education level required: High School or Vocational / Technical education. At least six (6) years of working experience in drilling and workover operations with reputable drilling contractors with a career history showing time served as a Roustabout, Floorman and Derrickman. Preferred to have working experience on offshore rigs. <strong>Skills/Competencies Required:</strong> Working knowledge of the English language. Advanced Mathematical skills adding, subtracting, dividing, multiplying , drilling practice, drilling fluids. Situation Awareness, Communication, Teamwork, Performance shaping factors - stress and fatigue, inspecting work. <strong>Physical Requirements:</strong> Ability to perform extremely heavy work. Ability to work in extreme heights and in confined areas. Constantly climbing (stairs, ladders). Constantly pushing &amp; pulling as per Company procedure and practice. Constantly bending, twisting and standing. Ability to work at heights and in confined spaces. Ability to work outdoors under all extreme weather conditions (Noise / Humidity / Cold / Heat). Ability to work in day/night shift. <strong>Certifications:</strong> As per ADES Training Matrix. Valid Well Control (Well Sharp / IADC) Certificate.</p>

<p><b>Responsibilities</b>: Preventive Maintenance: Run routine checks and service rotating or static equipment (pumps, valves, motors) using computerized maintenance systems.<br>Diagnostics &amp; Repair: Find the root cause of mechanical, electrical, or instrument failures and fix or replace broken parts<br>Safety Compliance: Follow Lockout/Tagout (LOTO), permit-to-work systems, and wear proper personal protective equipment (PPE) in hazardous zones.</p><p><strong>Desired Candidate Profile</strong></p><p><b>Qualifications</b>: Inspects, repairs, and tests mechanical, electrical, or instrumentation equipment (like pumps, compressors, and valves) to ensure safe, continuous plant or field operations.<br>Perform preventive routines, troubleshoot</p>

<h3 >About Upwing Energy and the Role</h3> <p >Upwing Energy is seeking a <strong >Project Engineer</strong> to join its team in Dammam, Eastern Province, Saudi Arabia. This full-time role is crucial for supporting the successful execution of oil and gas surface infrastructure projects. The ideal candidate will possess hands-on experience in interpreting Piping and Instrumentation Diagrams (P&amp;IDs), working with surface production equipment, and managing fabrication and installation processes. The Project Engineer will ensure projects meet technical specifications, quality standards, and operational requirements through close collaboration with clients, engineering teams, quality groups, wellsite employees, and vendors.</p> <h3 >Key Responsibilities</h3> <ul > <li >Lead and support projects involving the development, fabrication, and installation of surface infrastructure for oil and gas applications.</li> <li >Read, interpret, and analyze P&amp;IDs, engineering drawings, and specifications to ensure proper equipment selection and system integration.</li> <li >Conduct wellsite surveys prior to project execution, assessing site conditions, verifying infrastructure readiness, and identifying potential challenges.</li> <li >Coordinate with clients, vendors, and field personnel to ensure seamless installation and operation of equipment.</li> <li >Work closely with vendors, fabricators, and installation teams to ensure compliance with project requirements, industry standards, and safety regulations.</li> <li >Collaborate with multidisciplinary teams, including design engineers, procurement specialists, and field service teams, to streamline project workflows.</li> <li >Ensure all equipment and systems adhere to local regulations, international standards (API, ASME, ISO), and ARAMCO requirements where applicable.</li> <li >Identify potential project risks, develop mitigation strategies, and prepare associated cost estimates while controlling costs throughout the project.</li> <li >Maintain detailed records of project progress, prepare technical reports, and provide regular updates to management and stakeholders.</li> <li >Interact with customers to ensure safe and efficient field operations and provide guidance to the internal engineering team for interface equipment design.</li> <li >Assure adequate third-party Quality Assurance and Quality Control (QA/QC) of any equipment for the project.</li> <li >Record all non-conformances and non-production time, reporting these to management and stakeholders.</li> <li >Ensure all work within the area of responsibility is adequately documented and lessons learned are captured for future operations.</li> </ul> <h3 >Required Qualifications and Experience</h3> <ul > <li >At least <strong >two years of project management or coordination experience</strong>.</li> <li >Hands-on experience in reading and interpreting Piping and Instrumentation Diagrams (P&amp;IDs).</li> <li >Experience working with surface production equipment and managing fabrication and installation processes.</li> <li >System integration experience with intelligent completion systems is a plus.</li> <li >Extensive knowledge of Well Interventions (slickline, e-line, pumping, coiled tubing), Completions, DST/TCP, Surface Testing, and operations is a plus.</li> <li >Experience in ESP and other completion equipment design is a plus.</li> <li >IADC WellSharp or IWCF Well Intervention Pressure Control Certificate is a plus.</li> <li >Experience in conducting well on paper, intervention campaigns, and/or System Integration Testing (SIT) is a plus.</li> </ul> <h3 >Essential Skills and Attributes</h3> <ul > <li >Ability to work effectively within a multi-disciplinary team environment.</li> <li >Highly perceptive listening skills and openness to ideas from others.</li> <li >Ability to take initiative, work with minimal supervision, and remain committed to delivering high-quality results.</li> <li >Resilience and adaptability to dynamic environments and shifting project demands.</li> <li >Strong communication skills to convey complex technical concepts clearly across diverse teams and stakeholders.</li> <li >Collaborative approach, fostering positive relationships with clients, vendors, and internal teams.</li> </ul> <h3 >Work Environment and Physical Demands</h3> <p >The Project Engineer role requires a combination of office-based work and field visits to fabrication yards, vendor facilities, and oilfield wellsites. The position involves extended periods of sitting, standing, and walking, as well as the ability to lift up to <strong >25 kg (55 lbs.)</strong> and work in elevated areas or confined spaces. The engineer must be physically capable of wearing required Personal Protective Equipment (PPE), including hard hats, safety glasses, gloves, and steel-toe boots. Fieldwork may expose the individual to varying temperatures, humidity, loud noise, dust, fumes, and high-pressure equipment, necessitating strict adherence to safety protocols. Travel to client sites, vendor locations, or offshore facilities may be required based on project needs.</p> <h3 >Application Process</h3> <p >We encourage qualified candidates who meet the requirements to apply for this challenging role.</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p><strong >You Will:</strong></p><ul><li>Support the implementation and maintenance of equipment control systems, including equipment I/Os and fundamental machine logic</li><li>Assist with layout engineering efforts to support and optimize Powertrain line layouts, material flow, and equipment integration</li><li>Support automation systems involving robotics, end-of-arm tooling, pick-and-place automation, position sensors, material handling systems, fluid dispensing, vision systems, conveyors, and laser cleaning or welding equipment</li><li>Apply existing company, factory, and line-level controls standards and specifications when developing or modifying equipment controls</li><li>Support data collection and connectivity between machines and plant systems to enable traceability, machine status reporting, and process monitoring</li><li>Write, modify, and debug PLC code under established architectures and standards, with an emphasis on structure, documentation, and maintainability</li><li>Support integration between PLCs and subsystems such as conveyors, robots, Manufacturing Execution System (MES), machine vision systems, and third-party equipment</li><li>Implement and maintain safety-related control functions in accordance with established ANSI/RIA15.06 and OSHA requirements, with guidance as needed</li><li>Develop and update Human Machine Interface (HMI) screens to support equipment operation, alarms, and basic troubleshooting</li><li>Support external equipment integrators during build, installation, and commissioning through design reviews and issue resolution</li><li>Participate in equipment testing, installation, and buy-off activities at vendor sites and Lucid facilities</li><li>Assist with training Maintenance and Production teams on automated equipment operation and basic troubleshooting</li><li>Support machine-to-MES interactions to communicate machine status, process parameters, and product acceptability</li><li>Troubleshoot and optimize automated equipment to improve cycle time, uptime, and yield, escalating complex issues when appropriate</li></ul><p><strong>You Bring:</strong></p><ul><li>Bachelor s Degree in Electrical Engineering, Mechanical Engineering, Computer Engineering, or a related field</li><li>5+ years of experience in an Automation Engineering or Controls Engineering role within a manufacturing environment, preferably automotive or high-volume production</li><li>Working knowledge of electromechanical and mechatronic systems and their integration into automated equipment</li><li>Familiarity with industrial safety standards and safe automation practices (ANSI/RIA15.06, OSHA)</li><li>Hands-on experience programming and supporting industrial automation equipment, including:</li><ul><li>PLCs (Allen Bradley and/or Siemens); exposure to Safety PLCs is a plus</li><li>Human Machine Interfaces such as Ignition, FactoryTalk, or Siemens WinCC</li><li>Industrial communication networks such as Ethernet/IP or PROFINET</li><li>Basic serial and Ethernet communications between PLCs, devices, and databases</li></ul><li>Ability to read, modify, and debug PLC programs with a structured approach to code organization and documentation</li><li>Experience supporting automated machinery and industrial sensors such as photoelectric sensors, proximity sensors, pressure transducers, dispense systems, and temperature controllers</li><li>Exposure to robotics systems; experience with Fanuc robots is a plus</li><li>Exposure to vision systems such as Cognex or Keyence is desired</li><li>Experience supporting equipment from build through installation and into production preferred</li><li>Familiarity with production metrics, downtime analysis, and continuous improvement methodologies is a plus</li><li>Ability to interpret mechanical and electrical drawings; experience with 3D CAD tools such as SolidWorks or CATIA is a plus</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Bachelor s Degree in Electrical Engineering, Mechanical Engineering, Computer Engineering, or a related field</li><li>5+ years of experience in an Automation Engineering or Controls Engineering role within a manufacturing environment, preferably automotive or high-volume production</li><li>Working knowledge of electromechanical and mechatronic systems and their integration into automated equipment</li><li>Familiarity with industrial safety standards and safe automation practices (ANSI/RIA15.06, OSHA)</li><li>Hands-on experience programming and supporting industrial automation equipment, including:</li><ul><li>PLCs (Allen Bradley and/or Siemens); exposure to Safety PLCs is a plus</li><li>Human Machine Interfaces such as Ignition, FactoryTalk, or Siemens WinCC</li><li>Industrial communication networks such as Ethernet/IP or PROFINET</li><li>Basic serial and Ethernet communications between PLCs, devices, and databases</li></ul><li>Ability to read, modify, and debug PLC programs with a structured approach to code organization and documentation</li><li>Experience supporting automated machinery and industrial sensors such as photoelectric sensors, proximity sensors, pressure transducers, dispense systems, and temperature controllers</li><li>Exposure to robotics systems; experience with Fanuc robots is a plus</li><li>Exposure to vision systems such as Cognex or Keyence is desired</li><li>Experience supporting equipment from build through installation and into production preferred</li><li>Familiarity with production metrics, downtime analysis, and continuous improvement methodologies is a plus</li><li>Ability to interpret mechanical and electrical drawings; experience with 3D CAD tools such as SolidWorks or CATIA is a plus</li></ul><p></p></section>

<div dir="rtl"><h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">نبذة عن الوظيفة</h3> <p style="margin:0 0 12px; ************;">يبحث مشغل ابتسام محمد القايدي النسائي في <strong style="font-weight:700;">المدينة المنورة</strong> عن <strong style="font-weight:700;">موظف استقبال</strong> للانضمام إلى فريق العمل بدوام كامل. يتمثل الدور الأساسي في توفير نقطة الاتصال الأولى للزوار والعملاء، وإدارة المكالمات الهاتفية، وتنظيم السجلات لضمان سير العمل بسلاسة وكفاءة ضمن بيئة مهنية ومنظمة.</p> <h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">المهام والمسؤوليات الرئيسية</h3> <p style="margin:0 0 12px; ************;">يتولى موظف الاستقبال مجموعة من المهام الحيوية التي تضمن تجربة إيجابية للعملاء والزوار، وتشمل ما يلي:</p> <ul style="margin:0 0 12px; padding-inline-start:24px; list-style-type:disc; list-style-position:outside;"> <li style="margin:0 0 6px;">استقبال الزوار والعملاء والترحيب بهم، وتحديد احتياجاتهم، وتقديم المعلومات المطلوبة.</li> <li style="margin:0 0 6px;">إعلام المرجع المعني بوجود المراجعين والعملاء وتوجيههم إليه.</li> <li style="margin:0 0 6px;">استقبال المكالمات الهاتفية، والرد على الاستفسارات العامة، أو تحويل المكالمات إلى الأقسام المعنية.</li> <li style="margin:0 0 6px;">إجراء الاتصالات الداخلية للحصول على المعلومات أو تنسيق المهام.</li> <li style="margin:0 0 6px;">ترتيب مواعيد المقابلات وتسجيل أسماء المراجعين والعملاء في السجلات المخصصة لذلك.</li> <li style="margin:0 0 6px;">الالتزام التام بالأدلة الإجرائية والسياسات والإجراءات المنظمة للعمل.</li> </ul> <h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">المؤهلات والخبرات المطلوبة</h3> <p style="margin:0 0 12px; ************;">لشغل هذه الوظيفة، يجب أن تتوفر لدى المرشح المؤهلات والخبرات التالية:</p> <ul style="margin:0 0 12px; padding-inline-start:24px; list-style-type:disc; list-style-position:outside;"> <li style="margin:0 0 6px;">خبرة عملية تتراوح من <strong style="font-weight:700;">0 إلى 1 سنة</strong> في مجال الاستقبال أو خدمة العملاء.</li> <li style="margin:0 0 6px;">القدرة على التعامل مع الزوار والعملاء بلباقة واحترافية.</li> <li style="margin:0 0 6px;">مهارات تنظيمية جيدة لإدارة السجلات والمواعيد.</li> </ul> <h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">المهارات والكفاءات</h3> <p style="margin:0 0 12px; ************;">يتطلب هذا الدور امتلاك مجموعة من المهارات والكفاءات لضمان الأداء الفعال، منها:</p> <ul style="margin:0 0 12px; padding-inline-start:24px; list-style-type:disc; list-style-position:outside;"> <li style="margin:0 0 6px;">مهارات تواصل شفهي ممتازة ولباقة في التعامل مع مختلف الفئات.</li> <li style="margin:0 0 6px;">القدرة على الاستماع الفعال وتحديد احتياجات الآخرين بدقة.</li> <li style="margin:0 0 6px;">الدقة والاهتمام بالتفاصيل في حفظ السجلات وتنظيم المواعيد.</li> <li style="margin:0 0 6px;">القدرة على العمل ضمن فريق والالتزام بالتعليمات والإجراءات المحددة.</li> </ul> <h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">تفاصيل الوظيفة</h3> <p style="margin:0 0 12px; ************;">تتوفر هذه الفرصة الوظيفية في <strong style="font-weight:700;">المدينة المنورة</strong>، المملكة العربية السعودية، بنظام <strong style="font-weight:700;">الدوام الكامل</strong>. يتراوح الراتب الشهري لهذه الوظيفة بين <strong style="font-weight:700;">4000 و 4100 ريال سعودي</strong>.</p> <h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">عن مشغل ابتسام محمد القايدي النسائي</h3> <p style="margin:0 0 12px; ************;">مشغل ابتسام محمد القايدي النسائي هو مؤسسة متخصصة تسعى لتقديم خدمات عالية الجودة لعملائها في المدينة المنورة. يلتزم المشغل ببيئة عمل احترافية ومنظمة، ويهدف إلى توفير تجربة مميزة لكل من الزوار والعملاء من خلال فريق عمل ملتزم وفعال.</p></div>

<p>Responsibilities: Conduct preventive, predictive, corrective, and routine maintenance on production machinery, utilities, electrical systems, automation equipment, and facility infrastructure to support business continuity. Troubleshoot and repair electrical, PLC, HMI, instrumentation, hydraulic, pneumatic, servo, and electromechanical systems to minimize downtime and maintain uninterrupted operations. Perform root-cause analysis of equipment failures and implement sustainable corrective and preventive actions to prevent recurrence and protect operational continuity. Replace faulty components and carry out lubrication, alignment, adjustment, calibration, and functional testing to restore assets to safe and reliable operating condition. Develop and continuously improve maintenance strategies that enhance asset reliability, availability, performance, Overall Equipment Effectiveness (OEE), and business continuity. Maintain equipment reliability and operational continuity by ensuring proper calibration of maintenance tools, identifying and optimizing spare-parts requirements, monitoring critical-stock shortages, and standardizing suitable components. Maintain accurate work orders, equipment histories, preventive-maintenance schedules, downtime records, and spare-parts usage in Oracle Fusion CMMS/ERP. Support the installation, commissioning, testing, and handover of new equipment, electrical systems, and automation solutions while ensuring seamless integration with ongoing operations. Develop, modify, and troubleshoot PLC, HMI, and industrial control systems to improve process stability, productivity, and operational resilience. Implement condition monitoring, Industrial IoT, smart-maintenance, ERP/MES integration, and Industry 4.0 initiatives to enable proactive, data-driven maintenance decisions. Monitor equipment performance, maintenance KPIs, alarms, downtime trends, and energy consumption to identify risks, improve OEE, and prevent disruptions to production. Support CAPEX projects through technical evaluations, design reviews, FAT/SAT, installation, commissioning, and project handover. Collaborate with Production, Engineering, Quality, IT, and suppliers to resolve technical issues, standardize documentation, and deliver continuous engineering improvements that sustain reliable operations.</p><p><strong>Desired Candidate Profile</strong></p><p>Required Skills and Qualifications: Bachelor s degree in Electrical engineering, Mechatronics Engineering, Automation &amp; Control Engineering, or a related engineering discipline. Minimum of 4 years of industrial maintenance experience in a manufacturing or production environment. Professional certifications in PLC Programming, Industrial Automation, Robotics, Industrial Networks, or Project Management are considered an advantage. Strong knowledge and hands-on experience in preventive, predictive, and corrective maintenance to improve equipment reliability, availability, OEE, and business continuity. Proven ability to troubleshoot and repair mechanical, electrical, pneumatic, hydraulic, electromechanical, and instrumentation systems, including motors, VFDs, sensors, actuators, control panels, and protection devices. Practical experience troubleshooting PLC/HMI-controlled equipment, with working knowledge of industrial automation, condition monitoring, Industrial IoT, smart manufacturing, and predictive-maintenance technologies. Experience conducting root-cause analysis and implementing corrective and preventive actions, as well as managing maintenance tools, calibration requirements, critical spare parts, inventory optimization, and component standardization. Working knowledge of CMMS/ERP systems and the ability to interpret electrical schematics, P&amp;IDs, instrumentation diagrams, equipment manuals, and maintenance work instructions; strong analytical, reporting, communication, and teamwork skills.</p>