Security inspector Jobs in Saudi

SECTION I: Job Summary <br><br>The QC Inspector - Structural performs inspection and testing of structural steel fabrication and erection activities to verify compliance with drawings, specifications, and applicable codes and standards.<br><br>SECTION II: Job Analysis <br><br>Duties & Responsibilities<br><br> Perform in-process and final inspections on structural steel fabrication and erection works Witness structural bolting, welding, and alignment checks per the ITP Verify structural steel installation against approved drawings, erection plans, and tolerances Verify materials (structural steel, bolts, coatings) against material certificates and specifications Record inspection results and raise Non-Conformance Reports as required Coordinate hold points and inspections with client/third-party inspectors Maintain inspection records, checklists, and daily QC reports Verify calibration status of measuring and test equipment used on site Support punch-list generation and verification of closure for structural works Ensure work fronts comply with approved method statements and structural codes (AISC, etc.) Support preparation of quality documentation for structural handover dossiers<br><br>Requirements<br><br>SECTION III: Performance Indicators<br><br>Evaluated Based on<br><br> Inspection accuracy and completeness Timely identification and reporting of non-conformances First-time inspection pass rate on assigned work fronts Adherence to inspection schedules/hold points Quality of inspection documentation<br><br>SECTION IV: Required Skills & Abilities <br><br>Core Competencies<br><br>Attention to Detail Integrity Analytical Thinking Communication Skills Time Management<br><br>Technical Skills<br><br> Structural Steel Inspection Techniques Reading Structural/Erection Drawings Bolting & Welding Inspection Standards (Structural) Inspection & Test Plans (ITPs) Measuring & Alignment Equipment Use QC Documentation & Reporting<br><br>SECTION V: Required Experience and Education <br><br>Experience<br><br> 5-8 years of experience as a QC Inspector on structural steel construction projects<br><br>Education<br><br> Diploma or Bachelor's degree in Civil/Structural Engineering QC/inspection certification preferred

<h3 >About the Role</h3> <p >ABIS is seeking a <strong >QC Inspector – Insulation – Project</strong> to join their team. This full-time role involves performing inspection and testing of thermal/mechanical insulation and cladding installation activities to ensure compliance with project drawings, specifications, and applicable standards.</p> <h3 >Key Responsibilities</h3> <ul > <li >Perform in-process and final inspections on insulation and cladding installation works.</li> <li >Verify insulation material, thickness, and installation methods against approved specifications.</li> <li >Witness moisture barrier, banding, and cladding installation checks according to the Inspection and Test Plan (ITP).</li> <li >Verify materials and batch certificates against approved specifications.</li> <li >Record inspection results and raise Non-Conformance Reports (NCRs) as required.</li> <li >Coordinate hold points and inspections with client and third-party inspectors.</li> <li >Maintain inspection records, checklists, and daily Quality Control (QC) reports.</li> <li >Verify the calibration status of measuring and test equipment used on site.</li> <li >Support punch-list generation and verification of closure for insulation works.</li> <li >Ensure work fronts comply with approved method statements and insulation standards.</li> <li >Support the preparation of quality documentation for insulation handover dossiers.</li> </ul> <h3 >Performance Indicators</h3> <p >Performance in this role will be evaluated based on the following criteria:</p> <ul > <li >Accuracy and completeness of inspections.</li> <li >Timely identification and reporting of non-conformances.</li> <li >First-time inspection pass rate on assigned work fronts.</li> <li >Adherence to inspection schedules and hold points.</li> <li >Quality of inspection documentation.</li> </ul> <h3 >Qualifications and Experience</h3> <ul > <li >A minimum of <strong >5 to 8 years of experience</strong> as a QC Inspector on insulation/cladding application projects.</li> <li >A Diploma or Bachelor's degree in Mechanical Engineering is required.</li> <li >QC/inspection certification is preferred.</li> </ul> <h3 >Application Process</h3> <p >Interested candidates are encouraged to apply for this full-time position. The salary for this role will be discussed during the interview process.</p>

<p>The Roads Inspector monitors and inspects all phases of road construction activities to ensure adherence to approved drawings, specifications, materials, and safety procedures.</p><p>Your role</p><ul><li>Inspect road construction works including excavation, grading, subgrade, GSB, sub base, basecourse, and asphalt layers.</li><li>Verify compliance with material specifications and test results (soil, aggregates, asphalt).</li><li>Inspect drainage systems, kerbs, duct banks, utility crossings, and manholes.</li><li>Monitor traffic management setups and detours to ensure road user safety.</li><li>Prepare inspection reports, NCRs, and follow up on corrective actions.</li><li>Participate in joint inspections with contractors, consultants, and clients.</li><li>Ensure proper implementation of ITPs and QA/QC requirements.</li><li>Verify workmanship quality and safety in active road zones.</li></ul><p><strong>Desired Candidate Profile</strong></p><p>Diploma/Bachelor s in Civil Engineering. 3 7 years relevant experience in road inspection. Strong understanding of road construction materials and specifications. Good technical observation and documentation skills.</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The Mechanical Inspector will ensure the contractors are compliant with the contract documents, coordinate on a daily basis with the other teams to document and verify the quality and quantity of work performed by the Contractor and process the incoming Inspection Requests and technical submittals and perform the necessary actions.</p><p>Your role</p><ul><li>Reading and understanding the package contract documents, detailed drawings, specifications, and health and safety measures, together with any associated updates.</li><li>Ensuring the Contractor(s) are complying with the standards and specifications of the contract documents through observation, measurements, and testing as well as tracking quality assurance progress.</li><li>Maintaining records of the Contractor s manpower and equipment daily resources.</li><li>Undertaking all site supervision and inspections when required or instructed by the Resident Engineer (RE) or the Assistant Resident Engineer (ARE).</li><li>Documenting, in the areas assigned to the Inspector, the Contractor s personnel and equipment, activities observed, location of activities, reason for activities, and means and methods utilized. Additionally, report on materials delivery and following and implementing any site instructions made by the leader.</li><li>Apply and implement all quality controls and quality procedures of the site.</li><li>Follow up and implement any site instructions made by the leader.</li><li>Apply and implement all quality controls and quality procedures of the site.</li><li>Prepare any site measurements and surveying checks needed by the leader.</li><li>Monitoring conformance to quality, performance, and/or code requirements by performing inspection duties.</li><li>Monitor Health and Safety of the construction works and report on violations.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Qualifications</p><ul><li>Experience in Mechanical and transportation projects is required.</li><li>Candidates must have experience in Construction Supervision with a Consultancy</li><li>7 years of overall experience (minimum 5 years in the MEA).</li><li>For the Inspector position, a Bachelor degree or Diploma in Mechanical Engineering is required.</li></ul><p>Specific Skills Required</p><ul><li>Good knowledge in basic design requirements, familiar with Mechanical methodologies and installation processes and procedures.</li><li>Knowledge of the Building Codes.</li><li>Effective oral and written communication skills.</li><li>Competent at writing reports can present views clearly and concisely in good written English.</li><li>Detailed knowledge of construction techniques.</li></ul><p>Additional Requirements</p><ul><li>Familiarity with construction safety practices and regulations.</li><li>Ability to adapt to changing priorities and deadlines in a fast-paced environment.</li><li>Fluency in English; Arabic language skills are advantageous.</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>As an Electrical Inspector, you will play a crucial role in ensuring compliance with electrical codes, regulations, and safety standards across various construction and infrastructure projects. Your responsibilities will encompass inspecting electrical systems, equipment, and installations to verify their adherence to established guidelines and specifications. This role demands a meticulous approach, strong technical knowledge, and a commitment to upholding safety protocols in all electrical operations.</p><p><strong>Your role</strong></p><p>Inspection Duties</p><ul><li>Conduct thorough inspections of electrical systems, equipment, and installations to ensure compliance with relevant codes, standards, and specifications.</li><li>Review and interpret electrical plans, drawings, and blueprints to assess compliance with regulatory requirements.</li></ul><p>Code Compliance</p><ul><li>Monitor and enforce adherence to local and international electrical codes, regulations, and safety standards.</li><li>Identify non-compliance issues and provide recommendations for corrective actions to ensure conformity with regulations.</li></ul><p>Documentation and Reporting</p><ul><li>Prepare detailed inspection reports documenting findings, discrepancies, and corrective measures taken.</li><li>Maintain accurate records of inspections, approvals, and rejections for future reference and regulatory purposes.</li></ul><p>Collaboration</p><ul><li>Liaise with contractors, engineers, and project managers to address electrical compliance issues and provide technical guidance as needed.</li><li>Participate in meetings and discussions related to electrical inspections, ensuring effective communication and resolution of issues.</li></ul><p>Safety Oversight</p><ul><li>Promote and uphold electrical safety protocols and practices in accordance with industry standards.</li><li>Conduct safety inspections to identify potential hazards and ensure proper implementation of safety measures.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><h2>About you</h2><p>Qualifications and Skills</p><ul><li>Bachelor s degree in electrical engineering or a related field.</li><li>Professional certification as an Electrical Inspector is preferred.</li><li>Proven experience as an Electrical Inspector or similar role in the construction industry.</li><li>In-depth knowledge of electrical codes, regulations, and standards (e.g., NEC, IEC).</li><li>Strong analytical skills with the ability to interpret technical documents and drawings.</li><li>Excellent communication and interpersonal skills.</li><li>Attention to detail and the ability to work independently as well as part of a team.</li><li>Proficiency in relevant software applications for documentation and reporting.</li></ul><p>Additional Requirements</p><ul><li>Willingness to travel to various project sites across the UAE.</li><li>Familiarity with construction safety practices and regulations.</li><li>Ability to adapt to changing priorities and deadlines in a fast-paced environment.</li><li>Fluency in English; Arabic language skills are advantageous.</li></ul><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>We are seeking an experienced Electrical Inspector with strong expertise in Electrical Systems, ELV (Extra Low Voltage), and ICT Infrastructure to support the Program Management and Construction Management (PMCM) team on the prestigious project in Riyadh.</p><br><p>The successful candidate will be responsible for inspecting, monitoring, and ensuring that all electrical, ELV, and ICT installation works are executed in compliance with project specifications, applicable codes, quality standards, and approved construction drawings.</p><br><br><br>Responsibilities:<br><ul><li>Conduct site inspections for electrical, ELV, and ICT works to ensure compliance with approved drawings, specifications, and project requirements.</li><li>Monitor installation and testing activities related to:<ul><li>Power distribution systems</li><li>Lighting systems</li><li>Earthing and lightning protection systems</li><li>Structured cabling systems</li><li>Data and communication networks</li><li>CCTV systems</li><li>Access control systems</li><li>Public Address (PA) systems</li><li>Audio Visual (AV) systems</li><li>Building Management Systems (BMS)</li><li>Fire Alarm and Security Systems</li></ul></li><li>Review contractor inspection requests (IRs), material submittals, shop drawings, and method statements.</li><li>Verify quality of workmanship and ensure adherence to project quality standards.</li><li>Identify deficiencies, issue non-conformance reports (NCRs), and monitor corrective actions.</li><li>Witness testing and commissioning activities and maintain inspection records.</li><li>Coordinate with contractors, consultants, and project stakeholders to resolve technical issues.</li><li>Ensure compliance with relevant Saudi regulations, international codes, health, safety, and environmental requirements.</li><li>Prepare daily, weekly, and monthly inspection reports.</li></ul><br><br>Qualifications:<br><ul><li>Bachelor's Degree or Diploma in Electrical Engineering or a related discipline.</li><li>Minimum 8–10 years of experience in electrical inspection, with significant exposure to ELV and ICT systems.</li><li>Experience working on large-scale infrastructure, mixed-use, commercial, hospitality, or mega projects.</li><li>Prior experience in a PMCM/Consultancy environment is highly preferred.</li><li>Strong knowledge of international standards, including IEC, NFPA, IEEE, TIA/EIA, and relevant Saudi regulations.</li><li>Excellent communication and reporting skills.</li><li>Proficient in reading and interpreting construction drawings and technical specifications.</li></ul><strong>Candidates who are currently available in Saudi Arabia and can join immediately or within a short notice period will be given preference.</strong><br><p><span>Imagine a better future for you and a better future for us all.</span></p><br><p><span>Join our close-knit community of talented individuals who share your passion for making a positive impact. Our global team includes more than 69,000 employees, working together to make a difference in communities both close to home and around the world.</span></p><br><p><span>With us, you can. Apply today.</span></p><br><br> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> No experience required </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

<p>&nbsp;You can embrace your curiosity in a culture that celebrates new ideas and diverse perspectives. You can experience a world of opportunity and the chance to shape a career as unique as you. WSP Middle East is currently seeking a skilled and detail-oriented Saudi National Architect Inspector to join our supervision team for a project-based role in Riyadh, Saudi Arabia. This is a unique opportunity to contribute to a high-impact development, working closely with a multidisciplinary team of professionals in a dynamic and fast-paced project environment.</p><p>Ensure all construction activities are executed in accordance with approved architectural and engineering plans. Supervise the implementation of structural and architectural components, verifying compliance with design specifications and project standards. Monitor structural elements during construction to uphold safety, integrity, and stability requirements. Collaborate with structural engineers to resolve any structural concerns or discrepancies encountered on-site. Participate in the evaluation and selection of construction materials and systems, ensuring they meet both architectural and structural criteria. Conduct routine inspections of materials to confirm quality and adherence to project specifications. Work closely with architects and design professionals to address and resolve design-related issues during construction. Provide input on construction details to ensure consistency with the overall design intent. Review and update construction documentation, including drawings and specifications, to reflect approved changes and modifications. Maintain accurate and up-to-date as-built drawings for future reference and project close-out.</p><p><strong>Desired Candidate Profile</strong></p><p>Bachelor s degree in Architecture from a recognized university. Minimum of 5 years of relevant experience Previous experience working with a reputable architectural consultancy. Strong background in site-based architectural supervision and post-contract responsibilities. Proficiency in AutoCAD, Revit, Navisworks, and BIM tools. Experience with high-rise commercial and residential projects. Excellent communication, coordination, and client relationship skills. Saudi National for Saudization purposes</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>We are looking for Civil Inspector experienced in Infrastructure projects. The inspector will monitor contractors work, verify adherence to specifications and approved drawings, and provide daily reporting to management. The position requires strong technical knowledge, attention to detail, and the ability to act independently while collaborating with the wider project team.</p><p>Your role</p><ul><li>Carry out inspection on all road works in progress and ensure contractor s compliance with contract specifications and approved shop drawings.</li><li>Monitor and daily report to his line management contractor s progress in all road activities.</li><li>Inspect, check, and record that work is being executed in accordance with approved methodologies.</li><li>Check that site instructions are being followed and report finings to R.E.</li><li>Check services locations and ensure their protection.</li></ul><p>Rewards &amp; benefits</p><p>Explore the rewards and benefits that help you thrive at every stage of your life and your career. This includes:</p><ul><li>Tax-free salary.</li><li>Life insurance coverage.</li><li>Medical insurance.</li><li>Annual leave balance.</li><li>Company gratuity scheme.</li><li>Discretionary bonus program.</li><li>Annual flight contribution.</li><li>Transportation &amp; housing allowances.</li><li>Employee Wellbeing Program: 24/7 access to specialists in finance, legal matters, family care, personal health, fitness, and nutrition.</li></ul><p>Seize every opportunity to sharpen your skills, expand your expertise, and be recognized for the impact you make.</p><p>About AtkinsR alis</p><p>We're AtkinsR alis, a world-class engineering services and nuclear organization. We connect people, data and technology to transform the world's infrastructure and energy systems. Together, with our industry partners and clients, and our global team of consultants, designers, engineers and project managers, we can change the world. We're committed to leading our clients across our various end markets to engineer a better future for our planet and its people. Find out more. #KAAP</p><p>Worker Type Employee</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Diploma / Degree in civil engineering.</li><li>Minimum of 8 years experience in the field of work.</li><li>Good communication skills in written and spoken - English essential.</li><li>Must have integrity, be flexible and proactive.</li><li>Must demonstrate ability to act independently as part of a team.</li></ul><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>The QC Inspector – Civil performs inspection and testing of civil construction activities to verify compliance with drawings, specifications, and applicable codes and standards.<br> SECTION II: Job Analysis Duties &amp; Responsibilities · Perform in-process and final inspections on civil works (earthworks, formwork, rebar, concrete).<br> · Witness concrete pours, compaction tests, and cube/cylinder sampling per the ITP.<br> · Verify formwork, rebar placement, and dimensions against approved civil drawings.<br> · Verify materials (concrete mix, rebar) against material certificates and specifications.<br> · Record inspection results and raise Non-Conformance Reports as required.<br> · Coordinate hold points and inspections with client/third-party inspectors.<br> · Maintain inspection records, checklists, and daily QC reports.<br> · Verify calibration status of measuring and test equipment used on site.<br> · Support punch-list generation and verification of closure for civil works.<br> · Ensure work fronts comply with approved method statements and civil codes.<br> · Support preparation of quality documentation for civil handover dossiers.<br> SECTION VI: LEVEL OF AUTHORITY Supervisory / Managerial: No supervisory responsibility.<br> Financial: No financial or budget authority.<br> SECTION VII: MISCELLANEOUS JOB-SPECIFIC REQUIREMENTS General Profile / Specifications: · Field-based role requiring daily presence on active civil work fronts · Exposure to site/construction conditions · May require shift work or extended hours to cover inspection hold points</span> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> No experience required </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

Premise Taiyo Holding Group is currently looking for experienced Senior Inspectors holding valid Saudi Aramco QM qualifications and/or approvals to join our international network of inspection and quality professionals.<br>We are interested in candidates holding any Saudi Aramco QM certification/approval, across all inspection disciplines and technical specializations.<br>The primary area of assignment will be the Kingdom of Saudi Arabia, with concrete opportunities for selected professionals to also support Taiyo Holding Group projects and inspection activities across the Middle East and Africa.<br>Current residency in the Kingdom of Saudi Arabia is a mandatory requirement.<br>Key Responsibilities Depending on the specific QM qualification, discipline and project assignment, the Senior Inspector may be responsible for:<br>Performing inspection, quality control and quality surveillance activities in accordance with approved ITPs, drawings, specifications, procedures and applicable standards. Monitoring manufacturing, fabrication, construction, installation and testing activities. Witnessing inspections, tests and acceptance activities as required by applicable ITPs and project documentation. Reviewing relevant quality and technical documentation, including drawings, procedures, certificates, test records and inspection reports. Verifying compliance of materials, equipment, workmanship and executed activities with applicable project and Client requirements. Identifying, documenting and reporting non-conformities, deviations and quality issues. Supporting the implementation, verification and follow-up of corrective actions. Preparing accurate and professional inspection reports, quality records and supporting documentation. Coordinating with Clients, Contractors, Subcontractors, Vendors and project teams as required. Ensuring compliance with applicable Quality and HSE requirements. Maintaining high standards of professionalism, integrity, safety and quality throughout the assignment.<br>Mandatory Requirements Valid Saudi Aramco QM qualification and/or approval. Current residency in the Kingdom of Saudi Arabia. Proven experience as an Inspector / Senior Inspector within industrial, Oil & Gas, Energy, Petrochemical or related projects. Degree or Technical Diploma in the relevant engineering or technical discipline. Relevant discipline-specific professional certifications, where applicable. Strong knowledge of applicable international codes, standards and inspection practices. Ability to read and interpret technical drawings, specifications, ITPs, procedures and project documentation. Experience in identifying and reporting non-conformities and following up corrective actions. Ability to prepare clear and professional inspection reports and quality documentation. Good command of written and spoken English. Strong communication, coordination and organizational skills. Ability to work effectively within international and multicultural project environments. Availability and willingness to undertake assignments within Saudi Arabia and, where required, across the Middle East and Africa. Saudi Aramco QM Qualifications<br>Taiyo Holding Group welcomes applications from Senior Inspectors holding any valid Saudi Aramco QM certification or approval. All QM disciplines and qualification categories are of interest.<br>Candidates holding multiple Saudi Aramco QM qualifications are particularly encouraged to apply and should clearly indicate all QM codes/approvals currently held in their application.<br>Assignment Location Primary Location: Kingdom of Saudi Arabia<br>Selected professionals may also be considered for assignments across Middle East & Africa<br>Assignments may vary in location and duration according to Client and project requirements, ranging from individual inspection assignments to medium- and long-term project deployments.<br>How to Apply Qualified candidates are invited to submit:<br>Updated CV;Copies of all Saudi Aramco QM certificates/approvals;Copies of relevant professional and technical certifications;Current location in Saudi Arabia;Availability / earliest starting date;Contact details.<br>Please clearly indicate all Saudi Aramco QM qualification codes currently held.<br>Join Our Network Join Taiyo Holding Group and become part of our international network of qualified inspection and engineering professionals.<br>We are continuously looking for Saudi Aramco QM Certified / Approved Senior Inspectors to support our growing inspection activities in Saudi Arabia, the Middle East and Africa.<br>If you are currently based in Saudi Arabia and hold a valid Saudi Aramco QM qualification, we want to hear from you.<br>Be part of the Taiyo Team and grow with us.

Position: Cybersecurity Architecture Manager Location: Riyadh Saudi Arabia Contract Duration: 15th October 2026 - 28th Feb 2027<br>We are seeking an experienced Cybersecurity Architecture Manager to lead secure-by-design architecture across IT, cloud, and, where applicable, OT/ICS environments for a major football event project in Saudi Arabia. The role will be responsible for ensuring that new systems, applications, integrations, infrastructure, and vendor-delivered solutions meet cybersecurity requirements before go-live. This is a highly collaborative role involving cybersecurity, IT, cloud, procurement, vendors, and operational teams. The successful candidate will play a key role in ensuring that cybersecurity is embedded into the design and delivery of event-related technology environments.<br>Responsibilities Own and lead secure-by-design cybersecurity architecture across IT, cloud, and, where applicable, OT/ICS environments. Define, maintain, and enforce enterprise cybersecurity architecture standards covering: Network segmentation Identity and access architecture Cryptography and encryption standards Cloud security architecture and landing zones Secure infrastructure and application design Conduct security architecture reviews and design-stage risk assessments for new applications, integrations, infrastructure, and vendor-delivered solutions. Manage a high volume of architecture reviews associated with third-party and event technology systems, including ticketing, accreditation, broadcast, hospitality, venue, and operational platforms. Own cloud security architecture and ensure appropriate security controls are incorporated wherever cloud services are used. Define secure configuration baselines and hardening standards for infrastructure, applications, and security technologies. Where applicable, establish security requirements for event-specific OT/ICS environments, including access control, turnstiles, venue systems, and related operational technologies. Partner closely with the Cybersecurity Defense Manager to ensure architecture decisions support effective security monitoring, detection, and incident response. Own cybersecurity requirements and security controls within procurement, vendor selection, and vendor onboarding processes. Provide cybersecurity architecture input into business continuity and disaster recovery designs. Maintain a register of architectural exceptions, associated risks, compensating controls, and remediation requirements. Provide technical guidance to project teams, IT teams, vendors, and other cybersecurity stakeholders. Ensure cybersecurity architecture aligns with organizational security policies, standards, and applicable regulatory requirements. Support security design decisions throughout the project lifecycle, from initial design through implementation and go-live.<br>Qualifications3+ years of relevant cybersecurity architecture experience. Proven experience in cybersecurity architecture, security architecture, or information security architecture. Strong understanding of enterprise security architecture principles and secure-by-design practices. Experience with network security, segmentation, identity and access management, encryption/cryptography, and security controls. Experience conducting security architecture reviews and risk assessments. Experience with cloud security architecture and cloud environments. Knowledge of infrastructure and application security hardening and secure configuration standards. Experience working with third-party vendors and technology procurement/security requirements. Understanding of cybersecurity monitoring, detection, and incident response requirements. Strong communication skills with the ability to work with technical and non-technical stakeholders. Experience in large-scale projects, major events, or complex multi-vendor environments would be an advantage. Knowledge of OT/ICS security would be an advantage where relevant to the operating environment.<br>Required Skills Cybersecurity architecture Security architecture Information security architecture Enterprise security architecture principles Secure-by-design practices Network security and segmentation Identity and access management Encryption and cryptography Security controls Security architecture reviews and risk assessments Cloud security architecture and cloud environments Infrastructure and application security hardening Secure configuration standards Third-party vendor management and technology procurement/security requirements Cybersecurity monitoring, detection, and incident response requirements Strong communication skills<br>Preferred Certifications Relevant industry certifications would be an advantage, such as: CISSPSABSACCSPTOGAFCloud security certifications Other recognized cybersecurity architecture or information security certifications

QC INSPECTOR – PIPING & WELDING<br>We are seeking experienced QC Inspectors – Piping & Welding to join our project in KSA.<br>Key Responsibilities<br>Perform quality control inspections for piping installation, fabrication, welding, and related activities in accordance with project specifications, Saudi Aramco standards, and applicable international codes. Inspect piping materials, fabrication, installation, welding, and testing activities to ensure compliance with approved procedures and quality requirements. Conduct visual inspections and witness hydrostatic, pneumatic, welding, and other required tests. Review drawings, Inspection and Test Plans (ITPs), method statements, welding procedures, and quality documentation. Ensure compliance with applicable codes and standards, including ASME B31.3, ASME B31.4, ASME B31.8, ASME Section V & IX, API 620, API 650, and AWS D1.1. Conduct and review welding inspection activities in accordance with applicable certification requirements. Review and verify Non-Destructive Testing (NDT) programs, procedures, and inspection results. Perform, review, or ensure VT, MT, PT, RT, and UT inspections as applicable, with valid certification in the relevant method(s). Hold ASNT Level II certification in the relevant NDT method(s) when performing, reviewing, or ensuring NDT activities. Perform or review Radiographic Testing Film Interpretation (RTFI) when required, with valid RTFI certification. Prepare and maintain inspection reports, quality records, and related documentation. Coordinate with construction, engineering, and client representatives to resolve quality-related issues and ensure compliance with project quality requirements. Ensure compliance with applicable Saudi Aramco Engineering Procedures, standards, and project quality requirements.<br>Requirements<br>Diploma or bachelor’s degree in mechanical engineering.8–10 years of experience as a QC Inspector in Piping and/or Welding. Proven experience in Oil & Gas projects/fields. For Welding Inspectors: valid AWS CWI, CSWIP 3.1, or COMPANY-approved equivalent certification. For Welding Inspectors: valid ASNT Level II certification in relevant NDT method(s), where applicable. Valid certification for relevant VT, MT, PT, RT, UT, and RTFI activities, where applicable. Ex-Saudi Aramco approved candidates with a valid SAP Number are highly preferred. Candidates with Saudi Aramco approval should provide their SAP Number and approval copy. Strong knowledge of Saudi Aramco standards, specifications, applicable codes, and quality requirements.

<p>The Safety Inspector oversees occupational safety at construction sites, ensuring all activities comply with HSE guidelines, project safety plans, and legal requirements. The role focuses on preventing incidents and maintaining safe working conditions.</p><p>Your role Conduct daily HSE inspections of road projects, work zones, and equipment. Monitor implementation of risk assessments, method statements, and permit to work systems. Ensure workers use proper PPE and follow safety procedures. Identify hazards and unsafe practices; issue corrective actions and follow up. Verify compliance with traffic management measures and safe movement of vehicles/machinery. Conduct toolbox talks and safety awareness sessions. Participate in incident/near miss investigations. Maintain safety logs, daily reports, and audit documentation. Support emergency preparedness and drills.</p><p><strong>Desired Candidate Profile</strong></p><p>Diploma in Engineering or Occupational Safety. 3 7 years HSE experience in road or infrastructure projects. Certifications like NEBOSH, IOSH, OSHA preferred. Strong hazard identification and reporting skills. Good communication and safety leadership qualities.</p>

Title<br><br>QC Inspector<br><br>Under general supervision, applies skills and knowledge to determine degree of conformance of products to KBR or Client specifications. Performs inspection of various project activities; Generates reports of conditions found during inspection activities; Notifies management of significant problems; Completes documentation to attest to satisfactory completion of inspection or test activities. Job tasks, correctly performed, impact indirectly on cost containment, efficiency, profitability or operations. Typically requires minimum three years related experience.<br><br>R2129777

<h3 >About Parsons Corporation</h3> <p >Parsons Corporation is seeking a Structural Steel Inspector to join its team in Riyadh. This full-time position is critical for ensuring the quality and compliance of structural steel works on major projects, requiring 5-10 years of specialized experience.</p> <h3 >Role Overview</h3> <p >The Structural Steel Inspector will be responsible for the comprehensive inspection and monitoring of all structural steel fabrication, erection, installation, welding, bolting, and associated activities. This role ensures strict adherence to approved drawings, project specifications, applicable codes and standards, Inspection &amp; Test Plans (ITPs), and client requirements. The Inspector will collaborate closely with the Quality team, Structural Engineers, Construction teams, contractors, fabrication facilities, third-party inspectors, and consultants to maintain required quality, safety, dimensional, and technical standards from fabrication through final installation and handover.</p> <h3 >Key Responsibilities</h3> <ul > <li >Inspect structural steel fabrication and erection activities in accordance with approved drawings, specifications, ITPs, and method statements.</li> <li >Review and verify approved shop drawings, fabrication drawings, material specifications, and erection drawings.</li> <li >Conduct inspections at fabrication yards and project sites as required.</li> <li >Verify structural steel materials against approved material submittals and specifications, including Material Test Certificates.</li> <li >Inspect steel fabrication activities including cutting, drilling, forming, fit-up, assembly, and preparation.</li> <li >Inspect welding activities and verify compliance with approved Welding Procedure Specifications (WPS) and applicable requirements, ensuring welder qualifications.</li> <li >Monitor pre-welding preparations, joint fit-up, alignment, preheating, welding parameters, and post-weld requirements.</li> <li >Coordinate and witness Non-Destructive Testing (NDT) including UT, MT, PT, RT, and visual inspection, reviewing reports for acceptance criteria.</li> <li >Inspect bolted connections, including bolt type, grade, size, installation, tightening, and torque/tension requirements.</li> <li >Conduct dimensional inspections of fabricated and erected steel structures, verifying alignment, level, plumbness, tolerances, and connection geometry.</li> <li >Inspect surface preparation, blasting, cleaning, and coating application, verifying paint/coating systems, DFT requirements, and environmental conditions.</li> <li >Inspect fireproofing/fire protection systems applied to structural steel where applicable.</li> <li >Verify anchor bolts, base plates, embedded items, and steel-to-concrete interfaces.</li> <li >Monitor erection activities, ensuring temporary stability and adherence to approved erection procedures.</li> <li >Coordinate with Structural Engineers regarding technical issues, deviations, and field modifications.</li> <li >Raise and monitor Non-Conformance Reports (NCRs), Site Inspection Requests (SIRs), and Quality Observations, verifying implementation and closure of corrective actions.</li> <li >Prepare inspection reports, checklists, photographs, and maintain accurate quality and material traceability documentation.</li> <li >Witness and document required hold points, witness points, and inspection activities in accordance with approved ITPs.</li> <li >Review contractor quality documentation and ensure required records are complete and traceable.</li> <li >Participate in fabrication inspections, pre-shipment inspections, site inspections, and final acceptance inspections.</li> <li >Verify structural steel works against applicable AISC, AWS, ASTM, ASME, BS, EN, ISO, and project-specific requirements.</li> <li >Support quality audits and provide objective evidence of inspection and compliance.</li> <li >Monitor punch-list items and verify satisfactory completion before final acceptance.</li> <li >Support preparation of as-built records, inspection dossiers, welding documentation, NDT records, coating reports, and final handover documentation.</li> <li >Coordinate with commissioning and handover teams where structural steel works interface with mechanical, electrical, architectural, or specialist systems.</li> <li >Identify potential quality issues at an early stage and provide recommendations to prevent rework.</li> <li >Promote quality awareness and compliance among contractors and fabrication teams.</li> </ul> <h3 >Qualifications and Experience</h3> <ul > <li >Bachelor’s degree or diploma in Civil Engineering, Structural Engineering, Mechanical Engineering, or a related discipline.</li> <li >5+ years of relevant experience in structural steel inspection, fabrication, erection, or construction quality control.</li> <li >Proven experience on major airport, infrastructure, industrial, commercial, or large-scale construction projects.</li> <li >Strong knowledge of structural steel fabrication, welding, bolting, erection, coating, and inspection requirements.</li> <li >Experience working with structural steel fabricators, contractors, consultants, and third-party inspection agencies.</li> <li >Good understanding of drawings, specifications, ITPs, welding documentation, and inspection procedures.</li> <li >AWS Certified Welding Inspector (CWI) is highly preferred.</li> <li >CSWIP Welding Inspector certification is an advantage.</li> <li >NDT qualifications such as UT, MT, PT, or RT are advantageous.</li> <li >NACE / AMPP Coating Inspector certification is an advantage.</li> <li >ISO 9001 Internal Auditor / Quality certification is preferred.</li> <li >Relevant professional engineering certification is an advantage.</li> </ul> <h3 >Required Skills</h3> <ul > <li >Strong attention to detail and quality focus.</li> <li >Excellent inspection and observation skills.</li> <li >Strong understanding of structural steel quality requirements.</li> <li >Good analytical and problem-solving abilities.</li> <li >Excellent communication and coordination skills.</li> <li >Ability to identify non-conforming work and ensure appropriate corrective action.</li> <li >Ability to work effectively with contractors, fabricators, consultants, and project teams.</li> <li >Strong documentation and reporting skills.</li> <li >Proactive approach to quality assurance and prevention of rework.</li> <li >Ability to work under pressure and meet project inspection requirements.</li> <li >Strong commitment to safety, quality, and technical compliance.</li> <li >Professional and objective approach when dealing with inspection and acceptance issues.</li> </ul> <h3 >Work Environment</h3> <p >This full-time position is based in Riyadh. The role involves working collaboratively within a project-focused environment, ensuring adherence to stringent quality and safety standards for structural steel works.</p>

<p>The Aviation Security Specialist supports the implementation, monitoring, and continuous improvement of aviation security measures in accordance with the Aircraft Operator Security Program (AOSP), applicable national regulations, and international aviation security standards. The role supports airport security permissions, audits, investigations, risk assessments, incident reviews, security documentation, crisis management activities, and coordination with internal departments, airport authorities, law enforcement agencies, and security service providers.</p><p><b>Key Responsibilities:</b></p><ul><li>Implement aviation security policies, procedures, and controls in accordance with the Aircraft Operator Security Program.</li><li>Coordinate the issuance and renewal of airport security permits for employees.</li><li>Liaise with airport security departments and relevant authorities regarding security access and operational requirements.</li><li>Conduct internal and external aviation security audits and inspections.</li><li>Prepare initial and final audit reports, including findings, corrective actions, and recommendations.</li><li>Monitor the implementation and closure of corrective and preventive actions.</li><li>Review security incidents submitted through the Safety and Security Reporting System.</li><li>Conduct or support aviation security investigations and prepare investigation reports.</li><li>Participate in aviation security risk assessments and recommend appropriate mitigation measures.</li><li>Support the development, review, and updating of security manuals, procedures, and departmental documentation.</li><li>Implement and monitor security policies and procedures at the company s headquarters and other facilities.</li><li>Participate in crisis management planning, exercises, and response activities.</li><li>Coordinate security-related meetings with internal departments, external authorities, and service providers.</li><li>Provide administrative and operational support to the Aviation Security function.</li><li>Maintain accurate, confidential, and audit-ready security records and reports.</li><li>Support compliance with requirements issued by GACA, airport authorities, law enforcement agencies, and other relevant regulatory bodies.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor s degree in security management, Aviation Management, Criminal Justice, Business Administration, or a related field.</li><li>Minimum of 2 years of experience in aviation security, airport security, airline security, regulatory compliance, or a related security function.</li><li>Good knowledge of national and international aviation security regulations and standards.</li><li>Experience conducting security audits, inspections, investigations, or risk assessments.</li><li>Strong report-writing, analytical, and documentation skills.</li><li>Strong communication, coordination, and stakeholder management skills.</li><li>Ability to handle confidential and sensitive security information.</li><li>Good proficiency in Microsoft Office applications.</li><li>Proficiency in English and Arabic.</li></ul><p>Preferred Qualifications</p><ul><li>Aviation security training or certification recognized by GACA, ICAO, or an equivalent authority.</li><li>Experience working for an airline, airport operator, aviation services company, or regulatory authority.</li><li>Knowledge of the Aircraft Operator Security Program and aviation security quality-control requirements.</li><li>Experience with security incident-reporting systems and crisis management programs.</li><li>Experience coordinating with government authorities, airport security departments, or law enforcement agencies.</li></ul><p>Knowledge, Skills &amp; Competencies</p><ul><li>Aviation Security</li><li>Aircraft Operator Security Program</li><li>Security Audits and Inspections</li><li>Security Investigations</li><li>Security Risk Assessment</li><li>Regulatory Compliance</li><li>Corrective Action Management</li><li>Security Incident Reporting</li><li>Crisis Management</li><li>Security Manuals and Procedures</li><li>Airport Security Permits</li><li>Report Writing</li><li>Stakeholder Coordination</li><li>Confidentiality and Integrity</li><li>Planning and Organization</li></ul>

We are seeking experienced SIEM Security Operations Engineers to support enterprise cybersecurity monitoring, threat detection, incident analysis, and vulnerability management initiatives within a highly secure cloud environment.<br>The successful candidates will play a key role in deploying and operating the organization's Security Information and Event Management (SIEM) platform, integrating security products, monitoring security events, investigating alerts, and coordinating vulnerability remediation activities across cloud services and enterprise infrastructure.<br>This role is ideal for cybersecurity professionals with hands-on experience in SIEM operations, Security Operations Center (SOC) environments, log analysis, security monitoring, and vulnerability management who are passionate about strengthening enterprise cyber resilience. You will work closely with cybersecurity engineers, cloud teams, product development teams, and regulatory stakeholders to enhance security monitoring capabilities, improve threat detection, and ensure timely response to security incidents.<br>Key Responsibilities Assist in the deployment, configuration, and ongoing operation of the enterprise SIEM platform. Integrate security logs from enterprise security solutions including WAF, HIDS, DDoS protection systems, cloud platforms, and other security technologies. Configure and optimize SIEM correlation rules, alert logic, dashboards, and detection use cases. Monitor security events, investigate alerts, and perform initial triage of potential security incidents. Analyze logs to identify suspicious activities, indicators of compromise (IOCs), and emerging security threats. Escalate validated security incidents to the appropriate cybersecurity or engineering teams for remediation. Manage and track security vulnerability tickets for cloud services and enterprise platforms. Validate reported vulnerabilities, coordinate remediation with engineering teams, and perform post-remediation verification. Assist in improving detection capabilities by tuning alert rules and reducing false positives. Support security compliance initiatives and maintain operational documentation. Conduct technical demonstrations and explain cybersecurity solutions during regulatory reviews, audits, or customer engagements. Collaborate with cloud, infrastructure, application, and security teams to continuously improve enterprise security posture. Stay up to date with emerging cyber threats, attack techniques, and security best practices.<br>Required Qualifications Bachelor's degree in Cybersecurity, Computer Science, Information Technology, Information Security, or a related field. Minimum 2 years of professional experience in SIEM Security Operations, SOC Operations, Cybersecurity Monitoring, or Information Security. Saudi National. Hands-on experience operating SIEM platforms in enterprise environments. Experience with security log collection, correlation, analysis, and alert investigation. Good understanding of cybersecurity threats, attack techniques, indicators of compromise (IOCs), and security monitoring. Experience in vulnerability management and remediation workflows. Familiarity with enterprise security technologies such as:Web Application Firewall (WAF) Host Intrusion Detection Systems (HIDS) DDoS Protection Cloud Security Platforms Strong analytical and troubleshooting skills. Good written and verbal communication skills in English.<br>Preferred Qualifications Experience working within a Security Operations Center (SOC). Knowledge of cloud security concepts and cloud-native security services. Understanding of AI Security or Cloud Security technologies. Knowledge of Saudi Arabia cybersecurity regulations and compliance frameworks (e.g., NCA ECC, SAMA Cybersecurity Framework, PDPL). Experience presenting technical security concepts to auditors, regulators, or customers. Participation or recognition in cybersecurity competitions (e.g., CTFs, hacking competitions). Relevant cybersecurity certifications such as:Comp TIA Security+Comp TIA CySA+GIAC Certifications CEHSplunk Core Certified User/Power User Microsoft SC-200Google Professional Cloud Security Engineer (advantage) ISC2 CC or CISSP (advantage)

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Job Description <br></p><br>Job Summary<p>We are seeking an experienced <strong>Rotary QC Inspector</strong> to ensure the quality, inspection, testing, and compliance of rotary equipment during construction, installation, and commissioning activities in Oil &amp; Gas and Petrochemical projects. The ideal candidate should have hands-on experience in quality inspection of rotating equipment and be familiar with international quality standards and project specifications.</p><br><br><br><ul><li><p><strong>Contract Duration: 6 Months-1 Year</strong></p><br><br></li></ul>Key Responsibilities<ul><li><p>Perform quality inspections of rotating equipment such as pumps, compressors, turbines, blowers, fans, and related auxiliaries.</p><br><br></li><li><p>Verify installation activities in accordance with approved drawings, project specifications, and applicable international standards.</p><br><br></li><li><p>Conduct inspections during equipment installation, alignment, assembly, and commissioning.</p><br><br></li><li><p>Review inspection and test plans (ITPs), method statements, quality procedures, and inspection reports.</p><br><br></li><li><p>Coordinate with clients, consultants, subcontractors, and construction teams during inspections.</p><br><br></li><li><p>Witness testing activities, including mechanical run tests, alignment checks, and functional testing.</p><br><br></li><li><p>Ensure compliance with QA/QC procedures, HSE requirements, and project quality standards.</p><br><br></li><li><p>Raise and monitor Non-Conformance Reports (NCRs) and ensure timely corrective actions.</p><br><br></li><li><p>Maintain inspection records, quality documentation, and final handover dossiers.</p><br><br></li></ul><br>Requirements <br>Requirements<ul><li><p>Diploma or B.E./B.Tech in Mechanical.</p><br><br></li><li><p>Minimum <strong>5 years</strong> of QA/QC inspection experience in <strong>Oil &amp; Gas or Petrochemical</strong> projects.</p><br><br></li><li><p><strong>Contract Duration: 6 Months-1 Year</strong></p><br><br></li><li><p>Hands-on experience in inspection of rotating equipment.</p><br><br></li><li><p>Knowledge of international codes and standards such as API, ASME, ISO, and project quality requirements.</p><br><br></li><li><p>Ability to read and interpret engineering drawings, inspection procedures, and technical specifications.</p><br><br></li><li><p>Good communication skills and proficiency in preparing inspection reports.</p><br><br></li><li><p>GCC project experience will be an added advantage.</p><br><br></li></ul><br><br> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> No experience required </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

Lead and manage Qiddiya's Third-Party Security Risk Management program to ensure vendors, partners, consultants, and service providers comply with cybersecurity requirements and do not introduce unacceptable risks to Qiddiya's information assets, systems, and operations. The role is responsible for establishing security assessment frameworks, overseeing vendor security reviews, and driving remediation of identified risks. This aligns with industry practices for cybersecurity risk management and third-party oversight.<br><br>Key Responsibilities<br><br> Develop and maintain the Third-Party Security Risk Management (TPSRM) framework. Conduct cybersecurity due diligence and risk assessments for vendors and suppliers. Review security requirements during procurement, RFP, and contract stages. Assess cloud providers, Saa S platforms, managed service providers, and strategic partners. Define vendor security controls aligned with NCA ECC, ISO 27001, NIST, and Qiddiya cybersecurity standards. Establish vendor risk classification and assessment methodologies. Monitor remediation plans and track closure of identified security gaps. Collaborate with Procurement, Legal, Compliance, Enterprise Risk, and Technology teams. Lead periodic reassessments of critical vendors. Report third-party cyber risks, trends, and KPIs to senior management. Manage external security audits, questionnaires, and assurance activities. Lead and develop the Third-Party Security team<br><br>Requirements<br><br>Bachelor's degree in Cybersecurity, Information Security, Computer Science, or related field8-12 years of cybersecurity experience. Minimum 4 years in Third-Party Security, Vendor Risk Management, Cybersecurity Risk Management, or GRC. Experience within large enterprises, giga projects, banking, telecom, government, or critical infrastructure environments. Experience managing teams and stakeholder engagement at senior levels

Job Purpose The Network Security Manager is responsible for leading the design, implementation, operation, and continuous improvement of network security across enterprise, data center, and cloud environments. The role ensures that network infrastructure is securely designed, properly segmented, continuously monitored, and protected against cyber threats while maintaining high availability and performance of business-critical services. Key Responsibilities Lead the Network Security function and provide technical and operational leadership to the team. Define and maintain network security architecture, standards, configurations, and operational procedures. Manage enterprise and data center security technologies, including firewalls, WAF, VPN, IDS/IPS, secure gateways, and network access controls. Design and enforce network segmentation and security zones across data center, cloud, Kubernetes, and enterprise environments. Review firewall rules, security policies, NAT configurations, VPN connectivity, and network access requests. Ensure secure connectivity between on-premises infrastructure, cloud platforms, partners, and customer environments. Work closely with Network, Cloud, Infrastructure, Platform Engineering, SOC/Cybersecurity, and Architecture teams. Lead technical assessment and remediation of network security vulnerabilities and misconfigurations. Support incident response and perform technical investigation of network-related security incidents. Implement security monitoring, logging, alerting, and integration with SIEM/SOC platforms. Ensure network security controls comply with organizational policies and applicable cybersecurity requirements and standards. Conduct periodic reviews of firewall rules, privileged access, network segmentation, and security configurations. Evaluate new network security technologies and recommend improvements to the security architecture. Manage vendor relationships, support contracts, licensing, capacity, and technology lifecycle for network security solutions. Define and report operational KPIs covering security posture, availability, incidents, vulnerabilities, and remediation. Coach and develop network security engineers and ensure appropriate knowledge transfer and documentation. Qualifications & Experience Bachelor’s degree in Cybersecurity, Computer Science, Information Technology, Network Engineering, or a related field.7+ years of relevant experience in network and infrastructure security.2+ years of experience in a technical leadership or management role. Strong hands-on knowledge of enterprise firewalls, WAF, VPN, IDS/IPS, routing, switching, and network segmentation. Strong hands-on experience with enterprise network and application security technologies, including NGFW, WAF, VPN, IDS/IPS, and Application Delivery Controllers (ADC), with experience in F5 BIG-IP (LTM/ASM/Advanced WAF) highly preferred. Experience securing data center, cloud, and container/Kubernetes environments. Experience with high-availability and business-critical production environments. Good understanding of Zero Trust and defense-in-depth security principles. Familiarity with Saudi cybersecurity requirements, particularly NCA cybersecurity controls, is highly desirable. Experience with automation, APIs, Infrastructure as Code, or network/security automation is an advantage. Preferred Certifications Relevant certifications such as CISSP, CCNP Security, Fortinet NSE/FCP/FCSS, Palo Alto PCNSE, Check Point, or equivalent are preferred. Key Competencies Strong technical leadership Security architecture and design Troubleshooting and root-cause analysis Incident management Risk-based decision making Stakeholder and vendor management Documentation and operational discipline Team leadership and development