Sales Engineer Jobs - Riyadh Saudi

<p>Adree is seeking a Quality Control, Senior Engineer responsible for ensuring product/service quality by performing inspections, tests, and audits across the production or service lifecycle. This role supports continuous improvement initiatives, leads quality documentation, and coordinates with production and other teams to address quality issues effectively. Key Responsibilities Perform and oversee quality inspections and testing according to established standards, work instructions, and relevant specifications. Review batch/production records to ensure compliance with quality procedures . Identify, investigate, and document quality deviations/non-conformities (NCs) and coordinate corrective actions. Conduct root cause analysis (e.g., 5 Whys, Fishbone) and support CAPA (Corrective and Preventive Actions). Ensure proper use and calibration status of measuring instruments/test equipment (as applicable). Monitor product quality trends and report findings to management. Maintain accurate and timely quality documentation (checklists, inspection reports, test records, QA logs). Support internal/external audits by preparing documents and ensuring readiness for audit requirements. Collaborate with production/operations to improve process capability and reduce defects/rework. Train and guide junior QC team members on quality processes, inspection methods, and reporting. 4-7 years of experience in Quality Control / Quality Assurance / Inspection roles (industry-specific). Strong understanding of quality standards, inspection methods, and documentation practices . Knowledge of CAPA, root cause analysis, and quality tools (e.g., 5 Whys, Ishikawa/Fishbone, Pareto). Good attention to detail and ability to follow SOPs and work instructions strictly. Job Location: Client Site</p><p><strong>Desired Candidate Profile</strong></p><p>4-7 years of experience in Quality Control / Quality Assurance / Inspection roles (industry-specific). Strong understanding of quality standards, inspection methods, and documentation practices . Knowledge of CAPA, root cause analysis, and quality tools (e.g., 5 Whys, Ishikawa/Fishbone, Pareto). Good attention to detail and ability to follow SOPs and work instructions strictly.</p>

<p>Commissioning of Data Center HVAC and Chilled Water Systems FAT, SAT, Pre-Functional, Functional, and Integrated Systems Testing (IST) CRAH/CRAC Units, Chillers, Cooling Towers, Pumps, and Heat Load Testing Mechanical system redundancy, failover, and reliability testing BMS integration, controls, alarms, and sequence of operation verification</p><p><strong>Desired Candidate Profile</strong></p><p>Bachelor s degree in mechanical engineering from a recognized university 12+ years overall relevant experience</p>

<ul><li><p>Manage and support Linux servers, Kubernetes clusters, and containerized workloads.</p></li><li><p>Administer and optimize GCP resources and cloud services.</p></li><li><p>Support platform services including Elasticsearch, Redis, RabbitMQ, and associated components.</p></li><li><p>Monitor platform health, integrations, logs, alerts, and overall system performance.</p></li><li><p>Handle critical incidents, escalations, troubleshooting, and root cause analysis (RCA).</p></li><li><p>Support deployments, upgrades, configuration changes, and platform enhancements.</p></li><li><p>Monitor integration health and proactively resolve issues and anomalies.</p></li><li><p>Coordinate with internal cloud, infrastructure, and engineering teams.</p></li><li><p>Maintain operational documentation, SOPs, and technical records.</p></li><li><p>Support automation initiatives and continuous service improvements.</p></li><li><p>Ensure platform availability, reliability, scalability, and operational efficiency.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>3-5+ years of experience in platform engineering, cloud operations, system administration, or DevOps environments.</p></li><li><p>Strong experience with Linux, Kubernetes (GKE), and Google Cloud Platform (GCP).</p></li><li><p>Experience supporting high-availability production environments, platform services, and integrations.</p></li><li><p>Exposure to monitoring, observability, automation, and incident management processes.</p></li></ul><p><strong>&nbsp;</strong></p><p><strong>Skills</strong></p><ul><li><p>Linux (Ubuntu), Bash/Python</p></li><li><p>Kubernetes (GKE), Docker</p></li><li><p>Google Cloud Platform (Compute, IAM, Networking)</p></li><li><p>ELK Stack (Elasticsearch, Logging)</p></li><li><p>Redis, RabbitMQ</p></li><li><p>REST & GraphQL APIs</p></li><li><p>Prometheus, Grafana, Loki</p></li><li><p>YAML, Git</p></li><li><p>Ticketing tools (Jira/ServiceNow)</p></li></ul>

<p>Discover the Opportunity We're looking for a Staff AI Software Engineer who is equally passionate about building software and elevating engineering standards. This is a 50% hands-on coding and 50% technical leadership role, where you'll work closely with the engineering team to define best practices, improve development workflows, and help shape sprint planning and technical execution.</p><p>Discover the Responsibilities</p><ul><li>Hands on: Design, build, and scale modern full-stack applications with a focus on performance, scalability, and reliability.</li><li>Provide technical leadership by mentoring engineers, conducting code reviews, and championing engineering best practices.</li><li>Define coding standards, software architecture, and development processes that improve quality and consistency across the engineering team.</li><li>Partner with Product Managers and Engineering Leadership to shape sprint planning, break down technical initiatives, estimate work, and improve delivery.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>8+ years of experience in software engineering, with experience operating at Staff, Principal, or Technical Lead level.</li><li>Strong commercial experience with Java and the Spring ecosystem (Spring Boot, Spring Cloud, Spring MVC).</li><li>Strong full-stack development experience using React, Next.js, TypeScript, and modern frontend technologies.</li><li>Experience designing and building distributed, microservices-based architectures.</li><li>Experience building and consuming REST APIs and event-driven systems.</li><li>Experience working with PostgreSQL and/or MongoDB.</li><li>Experience with Docker, containerisation, Git, CI/CD pipelines, and cloud-native development.</li><li>Strong understanding of software architecture, design patterns, scalability, and system performance.</li><li>Experience mentoring engineers and influencing technical direction across multiple teams.</li><li>Excellent communication and stakeholder management skills.</li><li>Experience building AI-native products or integrating LLMs into production systems.</li><li>Hands on experience with RAG, AI agents, vector databases, LangChain, LangGraph, MCP, or similar AI frameworks.</li><li>Experience with Python and FastAPI for AI services.</li><li>Experience working in high-growth startups or scaling technology businesses.</li><li>Exposure to cloud platforms such as AWS, Azure, or Google Cloud.</li><li>Experience working with AI coding assistants such as Claude, Codex, Cursor, or GitHub Copilot.</li><li>Comfortable working in a fast paced startup environment with a high degree of ownership.</li></ul>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Leverage your expertise and join the dynamic team of a leading Saudi contractor focused on high-quality large-scale residential projects in Saudi Arabia. As a Lead Cost Control Engineer , you will be responsible for leading all project cost control activities throughout the project lifecycle. You will oversee project budgets, cost forecasting, earned value analysis, change management, and financial reporting while ensuring projects are delivered within approved budgets. You will work closely with Planning, Commercial, Procurement, Finance, and Project Management teams to provide accurate cost visibility and support executive decision-making. Key Accountabilities The position involves: Lead all project cost control activities across assigned projects from mobilization through project closeout. Develop, monitor, and control project budgets, cost codes, and cost breakdown structures (CBS). Prepare and maintain project cost reports, cost forecasts, cash flow projections, and earned value analysis (EVA). Monitor project commitments, expenditures, accruals, and remaining budgets. Analyze cost variances and provide recommendations to mitigate cost overruns. Coordinate with Planning Engineers to align project progress with cost performance. Review subcontractor payment applications, procurement costs, and variation orders from a cost control perspective. Track change orders, claims, and project risks affecting project cost. Prepare executive cost dashboards and monthly management reports. Support tendering and estimating teams by providing historical cost data and lessons learned. Coordinate with Finance to ensure alignment between project cost reports and financial reporting. Implement and improve cost control procedures, reporting standards, and project controls systems. Lead and mentor Cost Control Engineers while ensuring best practices across all projects. Ensure compliance with company policies, project controls procedures, and client reporting requirements.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><h1>Knowledge, Skills, and Experience We are Looking for:</h1><ul><li>Bachelor's degree in Civil Engineering, Construction Management, Quantity Surveying, or related discipline.</li><li>15+ years of experience in Cost Control within EPC, construction, infrastructure, or large-scale building projects.</li><li>Proven experience leading Cost Control activities for major construction projects.</li><li>Strong experience in residential, hospitality, commercial, or mixed-use developments.</li><li>Advanced knowledge of project budgeting, forecasting, cash flow management, earned value management (EVM), and cost reporting.</li><li>Strong understanding of project contracts, change management, claims, procurement, and subcontract administration.</li><li>Experience using project control software such as Primavera P6, EcoSys, SAP, Oracle, Power BI, or equivalent systems.</li><li>Strong analytical, financial, and reporting skills.</li><li>Excellent communication and stakeholder management abilities.</li><li>Fluent in English (Arabic is an advantage for GCC projects).</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>We are seeking an experienced Post-Tensioning Expert to oversee and certify post-tensioning activities for hybrid concrete and steel structures in large-scale industrial or renewable energy projects. The successful candidate will ensure structural integrity, compliance with design specifications, and adherence to quality and safety standards. Key Responsibilities: Supervise, witness, and verify post-tensioning activities for hybrid structures. Review foundation readiness, concrete curing, and grout application prior to tensioning. Inspect steel-to-concrete connections, anchorages, and tensioning procedures. Validate compliance with design drawings, reinforcement layouts, and tensioning logs. Generate inspection reports, NCRs, and QA/QC documentation. Coordinate with civil inspectors, installation teams, and other stakeholders to ensure smooth execution. Ensure HSE compliance and adherence to project-specific quality standards. Support final acceptance, commissioning, and handover processes.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Bachelor or Master degree in Civil or Structural Engineering</p><p>Minimum 8-10 years of experience in post-tensioning supervision of precast, hybrid, or heavy concrete structures</p><p>Hands-on experience with post-tensioning systems, including hybrid concrete-steel assemblies.</p><p>Strong knowledge of relevant international standards and codes (ACI, ASTM, ISO, Eurocode).</p><p>Proficient in reading and interpreting structural drawings, reinforcement layouts, and tensioning schematics</p><p>Strong documentation, reporting, and QA/QC skills</p><p>HSE certified with understanding of PTW and risk assessment processes.</p><p>Proven ability to work with multicultural and multidisciplinary teams</p><p>Willingness to travel to project sites</p><p></p></section>

<p>WE ARE HIRING – CIVIL / TECHNICAL OFFICE ENGINEER</p><p>We are looking for an experienced Civil Engineer – Technical Office Engineer to join our team remotely from Egypt, working closely with and reporting to our Head Office in Riyadh, Saudi Arabia.</p><p>&nbsp;Work Location: Remote – Egypt<br>Head Office: Riyadh, Saudi Arabia<br>Employment Type: Full-Time or Part-Time<br>&nbsp;Position: Civil Engineer – Technical Office Engineer</p><p>Key Responsibilities:</p><p>• Prepare shop drawings for structural and architectural elements.<br>• Review and audit drawings received from consultants and clients, ensuring compliance with specifications.<br>• Prepare quantity take-offs and Bills of Quantities (BOQ).<br>• Prepare monthly and final invoices/payment certificates and follow up on their approval.<br>• Prepare and review Bar Bending Schedules (BBS).<br>• Monitor executed works and ensure conformity with approved drawings and technical specifications.<br>• Prepare daily and weekly technical/progress reports.<br>• Review technical proposals from contractors and suppliers and prepare technical comparisons.<br>• Prepare Variation Orders and assess additional works.<br>• Prepare As-Built Drawings upon project completion.<br>• Maintain regular communication and coordination with the Riyadh Head Office.<br>• Provide technical updates, reports, and required documentation to the Riyadh Head Office.<br>• Attend virtual meetings and coordinate with the project and technical teams in Riyadh as required.</p><p>Requirements:</p><p>• Bachelor’s degree in Civil Engineering.<br>• Previous experience in Technical Office / Construction Engineering.<br>• Strong knowledge of shop drawings, BOQ, quantity surveying, BBS, payment certificates, variations, and as-built drawings.<br>• Proficiency in relevant engineering and drafting software.<br>• Good communication, coordination, and reporting skills.<br>• Ability to work independently and meet deadlines in a remote working environment.<br>• Willingness to coordinate regularly with the Riyadh Head Office.<br>• Candidates must be currently based in Egypt.</p><p>&nbsp;</p>

<p>Tabby creates financial freedom in the way people shop, earn and save by reshaping their relationship with money. Over 17 million users choose Tabby to stay in control of their spending and make the most out of their money. The company s flagship offering allows shoppers to split their payments online and in-store with no interest or fees. Over 40,000 global brands and small businesses, including Amazon, Noon, IKEA, and SHEIN use Tabby to accelerate growth and gain loyal customers by offering easy and flexible payments online and in stores. Tabby generates over $10 billion in annual transaction volume for its partner brands and is the highest-rated, most-reviewed, largest, and fastest-growing FinTech in the GCC region. Tabby launched in 2019 and has since raised +$1 billion in equity and debt funding from global and regional investors, and is now valued at $4.5 billion.</p><p>We are hiring a Data Engineer to join our DWH Team, who will help us create our corporate DWH using cloud technologies and best practices for data processing and storage.</p><ul><li>DWH development for Business Users, Analysts and ML Engineers;</li><li>Data synchronization between internal and external systems;</li><li>Development tools for collecting data into DWH;</li><li>Development EL / ELT / ETL pipelines;</li><li>Integration new tools and practices for data governance and data quality;</li><li>Costs optimization.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>3+ years of experience as a Data Engineer;</li><li>DWH development and maintenance experience;</li><li>Architecture: Kimball, Inmon, Medallion, Data Mesh;</li><li>Data modeling: SCD forms, Normal forms, Star Schema, Data Vault;</li><li>Python + best practice for Python;</li><li>SQL + best practice for SQL;</li><li>System design best practices;</li><li>Familiar with tech stack as Airflow, dbt, BigQuery, Clickhouse, PostgreSQL, Docker, GitLab(CI/CD), GCP;</li><li>Best practice for data processing and data storing.</li><li>Bonus skills REST API / GRPC API / Message brokers &amp; Queues;</li><li>Experience on modern systems of data storing: Relational, MPP, NoSQL;</li><li>Experience on Google Cloud Platform.</li></ul>

<p>The HSE Engineer - GCC National will be responsible for maintaining effective operation and management of KEO s Safety Management System on our mega project. Providing HSE advice and information to KEO staff and contractors to raise the standards of Health and Safety on site. We envisage success in this role to include: Ensuring the effective implementation of the KEO SMS on the project. Establishing a working relationship, promoting and advising on HSE issues with the Client, KEO Project Team and Contractors. Maintaining an up to date knowledge of HSE best practices and standards. Assessing the adequacy and effectiveness of the SMS, reviewing and recommending revisions as necessary to the Regional H&amp;S Manager. Carrying out HSE training based on training needs assessment and training programme for KEO employees on the project. Monitoring and reporting on the standards of HSE achieved by the Contractors and maintain statistical data for the Project. Ensuring that incident reporting &amp; investigation is carried out effectively and immediately to determine root cause and provide recommendations/directions aimed at preventing re-occurrence. Reviewing and analysing the project incident data &amp; KPI s on a monthly basis Carrying out periodic inspections of the project to ensure compliance &amp; where applicable make recommendations for change. Managing the activities of &amp; assign duties for KEO Safety Officers Reviewing of contractor s H&amp;S documentation for compliance to relevant standards. Tracking the closure of H&amp;S violation reports and H&amp;S inspection reports that are issued to the contractor. Chairing Project H&amp;S Meetings &amp; attend construction Progress Meetings.</p><p><strong>Desired Candidate Profile</strong></p><p><br></p>

<h3 >About Mott MacDonald and the Role</h3> <p >Mott MacDonald is seeking a <strong >Principal Structural Engineer</strong> to join its team in Riyadh, operating on a full-time basis. This role involves leading project teams on building structures projects, combining technical delivery with managerial leadership. The successful candidate will apply a strong structural engineering background to deliver quality outcomes across a variety of built environment projects, ensuring adherence to agreed scope, budget, and timescales.</p> <h3 >Key Responsibilities</h3> <ul > <li >Lead the preparation of concept, scheme, and detailed design calculations and drawings for structural engineering projects.</li> <li >Prepare designs, specifications, calculations, drawings, and risk assessments for maintenance, refurbishment, and new build schemes, obtaining statutory approvals as required.</li> <li >Undertake structural engineering analysis and design across building structures projects.</li> <li >Present technical aspects of projects and structural design approaches to both technical and non-technical audiences.</li> <li >Maintain comprehensive knowledge of current technical engineering codes and practices, contributing to technical matters at project and divisional levels.</li> </ul> <h3 >Technical Leadership and Mentorship</h3> <p >The Principal Structural Engineer will provide technical direction throughout concept, scheme, and detailed design stages. This includes promoting a collaborative working approach and actively mentoring junior engineers and technicians to support their technical development. The role also involves the preparation and review of designs, specifications, calculations, drawings, risk assessments, and other technical outputs.</p> <h3 >Project Delivery and Quality Assurance</h3> <ul > <li >Be accountable for the timely production and delivery of reliable design solutions, reports, specifications, and drawings.</li> <li >Provide effective task and resource management, monitoring delivery against agreed scope, programme, and budget.</li> <li >Inspect works carried out on site and monitor quality and compliance with design requirements.</li> <li >Provide structural technical support and manage the technical accuracy of project delivery.</li> </ul> <h3 >Experience and Qualifications</h3> <p >Candidates for this Principal Structural Engineer position are expected to possess <strong >5 to 10 years of relevant experience</strong> in structural engineering, demonstrating a strong background in leading building structures projects. This experience should encompass technical delivery, managerial leadership, and the ability to guide projects through all design stages.</p> <h3 >Company Values and Work Environment</h3> <p >Mott MacDonald fosters an environment that supports continuous improvement and digital ways of working, encouraging the sharing of knowledge and lessons learned. All team members are expected to demonstrate safe, ethical, and inclusive behaviours aligned with Mott MacDonald's core values.</p>

<h3 >About the Role</h3> <p >Hill International is seeking a <strong >Design Engineer - Roads and Utilities</strong> with over 10 years of experience to join their team. This full-time role involves leading the design and coordination of roads, drainage, utilities, and related infrastructure works, particularly for large-scale airport renovation projects. The successful candidate will ensure compliance with applicable standards and coordinate with various engineering and construction teams.</p> <h3 >Company Overview</h3> <p >Hill International is a global leader in program management, project management, and construction management, with over 4,400 professionals across more than 100 offices worldwide. As a GISI Consulting Group company, Hill focuses exclusively on protecting client interests throughout the construction project lifecycle, adapting tailored approaches and solutions to meet specific assignment needs. Hill International is an Equal Opportunity Employer/Veteran/Disabled.</p> <h3 >Key Responsibilities</h3> <ul > <li >Communicate continuously with client representatives regarding project progress and concerns.</li> <li >Propose in-house Project Management procedures to ensure compliance with contract requirements and client procedures.</li> <li >Establish and maintain specific project procedures for Design/Construction Supervision Management.</li> <li >Review road and utility designs, technical studies, calculations, specifications, drawings, and Bills of Quantities (BOQs).</li> <li >Evaluate road geometry, pavement design, intersections, access arrangements, drainage, traffic management, signage, road markings, and safety barriers.</li> <li >Review utility networks, including stormwater, potable water, sewerage, irrigation, fire water, electrical, and telecommunications systems.</li> <li >Ensure compliance with applicable Saudi regulations, aviation requirements, project specifications, and relevant international standards.</li> <li >Identify design gaps, utility clashes, and technical interfaces between roads, utilities, buildings, airfield facilities, and other infrastructure packages.</li> <li >Coordinate engineering requirements with consultants, designers, internal departments, airport stakeholders, and relevant authorities.</li> <li >Review design changes, technical queries, value-engineering proposals, and proposed deviations from approved requirements.</li> <li >Provide technical clarification and engineering support to Project and Construction teams, while respecting contractual responsibilities.</li> <li >Review as-built drawings, testing and commissioning records, O&amp;M manuals, and technical handover documentation for engineering compliance.</li> <li >Maintain technical records, design-review comments, and closure tracking through the applicable document-management system.</li> <li >Ensure continuous compliance with Hill International's Quality, Environmental, Safety, and Occupational Health Policies, Manuals, and Procedures.</li> </ul> <h3 >Qualifications and Requirements</h3> <ul > <li >Bachelor’s degree in engineering from an accredited university.</li> <li >Minimum of <strong >10 years of experience</strong> in large-scale Airport Renovation projects.</li> <li >Experience liaising with industry and contractor partners on strategy and direction in asphalt and pavement engineering, technology, and design.</li> <li >Relevant experience in airport infrastructure and operational airport environments.</li> <li >Proficiency with AutoCAD, Civil 3D, GIS, and BIM platforms.</li> <li >Well-versed in flexible and rigid pavement design, including polymer-modified asphalt (PMA).</li> <li >Ability to oversee or undertake technical support activities on construction contracts and provide advice on civil engineering work.</li> <li >Experience in technical reviews and verification of projects and contracts.</li> <li >Knowledge of pavement analysis and design for civil engineering and building works.</li> <li >Experience in construction management of pavements on civil project works and planning/execution of pavement site investigations.</li> <li >Ability to oversee and undertake the production of technical reports and construction documents (*, specifications and drawings).</li> <li >Experience in preparing estimates, methodologies, and project reports, and liaising with clients and teams to ensure profitable and timely project completion.</li> <li >Proficiency in project financial control, profitability, invoicing, and reporting.</li> <li >International work experience, with a preference for the Middle East / KSA.</li> </ul> <h3 >Work Type</h3> <p >This is a full-time position.</p>

<p>We are looking for a Fresh Graduate IT Technical Engineer to join our team and support technical operations, IT systems, and technology-related projects.</p><p>Key Responsibilities</p><ul><li>Provide technical support and troubleshoot hardware, software, and IT systems.</li><li>Assist in the installation, configuration, and maintenance of IT equipment and systems.</li><li>Support IT projects and technical implementations.</li><li>Monitor and resolve technical issues in a timely manner.</li><li>Assist in preparing and updating technical documentation and reports.</li><li>Coordinate with internal teams to address technical requirements.</li><li>Stay updated on the latest technologies and technical solutions.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor s degree in Information Technology, Computer Science, Computer Engineering , or a related field.</li><li>Fresh graduates are welcome to apply.</li><li>Excellent command of English, both written and spoken .</li><li>Strong problem-solving and analytical skills.</li><li>Good communication and teamwork skills.</li><li>Willingness to learn and develop technical skills.</li></ul>

<h3 >About the Role</h3> <p >Parsons Corporation is seeking a <strong >Senior QA/QC Engineer</strong> to join its team in <strong >Riyadh, Saudi Arabia</strong>. This full-time position provides senior-level, site-based civil quality control oversight for a PIF-backed national master developer across assigned construction zones or packages.</p> <h3 >Role Purpose and Compliance</h3> <p >The Senior QA/QC Engineer is responsible for verifying that civil works are executed in full compliance with IFC drawings, approved shop drawings, project technical specifications, contractual requirements, and Saudi codes and authority standards. This role offers hands-on civil inspection leadership, supports package-level QA/QC governance, and ensures contractor compliance through structured site surveillance, defect prevention, and documented verification. The position is execution-focused and site-intensive, with a strong emphasis on civil construction quality.</p> <h3 >Core Civil Inspection Responsibilities</h3> <ul > <li >Conduct and lead inspections of civil works, including earthworks, subgrade preparation, foundations, footing works, reinforcement installation, and concrete works (pre-pour, during pour, post-pour).</li> <li >Inspect structural elements, retaining structures, infrastructure works (stormwater, drainage, utilities), roadworks, pavements, external works, and hardscape.</li> <li >Support the implementation of approved Inspection and Test Plans (ITPs) for civil works and review civil method statements prior to execution.</li> <li >Verify contractor QC inspection reports and daily logs, and witness field testing activities such as soil compaction, concrete slump, and cube sampling.</li> <li >Validate third-party laboratory testing compliance and ensure the calibration status of site testing equipment.</li> <li >Provide technical clarification support to site teams as required, ensuring compliance with IFC drawings and specifications.</li> </ul> <h3 >Quality Assurance and Defect Management</h3> <ul > <li >Identify high-risk civil activities prior to execution and recommend preventive inspection strategies, supporting early warning reporting of quality risks.</li> <li >Promote a defect prevention culture within contractor teams.</li> <li >Raise Non-Conformance Reports (NCRs) for civil non-conformances, review contractor root cause analysis and corrective actions, and conduct re-inspections prior to NCR closure.</li> <li >Monitor recurring civil defect trends (*, honeycombing, cracking, compaction failures) and support defect clearance during sectional and final handover.</li> <li >Participate in civil pre-handover inspections, verify the closure of punch list items, and review civil-related as-built drawings.</li> </ul> <h3 >Training and Contractor Oversight</h3> <ul > <li >Conduct toolbox talks on common civil workmanship failures and share lessons learned related to structural and infrastructure works.</li> <li >Mentor junior civil inspectors and provide feedback to contractor civil teams on recurring issues.</li> <li >Support quality awareness sessions related to specifications and inspection tolerances.</li> <li >Perform routine and unannounced surveillance inspections to identify workmanship deficiencies early.</li> <li >Assess the adequacy of contractor civil QC personnel and enforce adherence to approved procedures and inspection sequences.</li> <li >Escalate repeated non-compliance to the Project Quality Manager.</li> </ul> <h3 >Qualifications and Experience</h3> <ul > <li >A minimum of <strong >5 to 10 years</strong> of relevant experience in civil quality control and assurance within construction projects.</li> <li >Demonstrated ability to ensure proper closure of hold and witness points, adequate material traceability, and inspection readiness prior to approvals.</li> <li >Proficiency in confirming test records and inspection documentation completeness, and ensuring proper EDMS uploading (*, Aconex) for traceability.</li> </ul>

<h3 >Job Summary</h3> <p >The PAC Group is seeking a <strong >Manufacturing E Motor Process Engineer</strong> to join a long-term, full-time international project based in Riyadh, Saudi Arabia. This onsite role requires candidates to relocate and reside in Saudi Arabia for the project's duration, anticipated from September 2026 through December 2027. The position offers a competitive salary and package, along with a completion bonus, and requires 5-10 years of relevant experience.</p> <h3 >Role and Project Context</h3> <p >The PAC Group specializes in engineering consulting, program management, and operational excellence, supporting leading companies across automotive, aerospace, industrial, and technology sectors globally. For this project, PAC is assisting a client in launching an electric drive unit manufacturing line in Saudi Arabia. This involves the e-motor and inverter through integrated e-drive assembly and end-of-line testing, supplying a vehicle assembly plant. The Process Engineer will be responsible for equipment installation and commissioning, process qualification, run-at-rate, PPAP, Start of Production (SOP), and ramp-up to full-volume production. Candidates will take ownership of a specific process area—stator, rotor, motor assembly and test, gearbox, or inverter and power electronics—or function as a cross-process generalist.</p> <h3 >Key Responsibilities</h3> <ul > <li >Define and manage processes for the assigned perimeter, including process flow, cycle-time allocation, parameter windows, control plans, PFMEA, work instructions, and change control.</li> <li >Lead equipment commissioning, Site Acceptance Testing (SAT), process capability studies, and qualification runs; define and execute Design of Experiments (DOE) activities.</li> <li >Deliver Advanced Product Quality Planning (APQP) and Production Part Approval Process (PPAP) requirements for the assigned area.</li> <li >Engineer to takt by balancing stations and eliminating bottlenecks and micro-stops.</li> <li >Drive production ramp-up by analyzing scrap, rework, first-pass yield, and downtime data to prioritize improvements and close gaps to full-rate production.</li> <li >Act as the first-line technical escalation point for production, applying structured problem-solving methodologies such as 8D, 5-Why, Ishikawa, and Shainin.</li> <li >Make containment decisions in collaboration with Production and Quality teams.</li> <li >Design and validate error-proofing mechanisms, including poka-yoke, in-line verification, torque and force-displacement monitoring, and part traceability.</li> <li >Build the process data foundation through Statistical Process Control (SPC) on critical characteristics, Manufacturing Execution Systems (MES), and traceability systems.</li> <li >Support customer and supplier interfaces, including Just-in-Time/Just-in-Sequence (JIT/JIS) delivery, customer-specific requirements, supplier PPAP for incoming components, and problem-solving with equipment and component suppliers.</li> <li >Contribute to safety and compliance activities related to high-voltage work practices, permanent magnet handling, press and laser safety, chemical and adhesive handling, ergonomics, and Environmental, Health, and Safety (EHS) risk assessments.</li> <li >Train and coach production technicians and operators on process fundamentals, critical parameters, troubleshooting, and reaction plans.</li> </ul> <h3 >Candidate Profile and Experience</h3> <p >The ideal candidate will possess 5-10 years of experience in a relevant manufacturing process engineering role. This position requires an individual who is comfortable operating with ambiguity and incomplete data, demonstrating a strong bias toward the production floor by actively investigating and building conclusions from evidence. Rigorous attention to documentation and change control is essential for effective process transfer and scaling. The role demands a collaborative approach across functions and cultures, with the ability to maintain and defend a technical position under pressure while working as part of an international, multicultural team embedded onsite with the client.</p> <h3 >Project Duration and Work Environment</h3> <p >This position requires full relocation to and residence in the Kingdom of Saudi Arabia for the project's duration, from September 2026 through December 2027. It mandates a 100% onsite presence at the client’s manufacturing facility in Saudi Arabia and is not a remote, hybrid, fly-in/fly-out, or rotational assignment. Candidates must be prepared to establish temporary residence for the project period. Regular work will occur within production areas, dry rooms, and cleanrooms, necessitating adherence to associated PPE and gowning requirements. During commissioning, qualification, SOP, and ramp phases, flexibility in working hours and periodic shift or weekend support will be expected. International assignment and work authorization requirements will apply based on candidate eligibility and project needs.</p> <h3 >Desired Outcomes</h3> <ul > <li >Successful qualification of the process area, passing run-at-rate, and timely submission and approval of PPAP according to customer timing.</li> <li >Maintenance of net cycle time within takt allocation for stations within the perimeter, with Overall Equipment Effectiveness (OEE) meeting or exceeding the ramp plan.</li> <li >First-pass yield adherence to the planned ramp curve, with top scrap and rework drivers ranked, understood, and actively addressed.</li> <li >Zero customer line stoppages attributable to the process area, with any escape having a verified root cause and permanent countermeasure.</li> <li >Complete, current, and actively used process documentation, including control plans, PFMEA, work instructions, parameter windows, and reaction plans.</li> <li >Production technicians within the area capable of independent process operation and troubleshooting.</li> </ul>

<h3 >About Almarai</h3> <p >Founded in 1977 and headquartered in Riyadh, <strong >Almarai</strong> is recognized as the world’s largest vertically integrated dairy company and the largest food and beverage manufacturing and distribution company in the MENA region. As the number one FMCG Brand in MENA, Almarai holds a market-leading position across its categories in the GCC, Egypt, and Jordan. With over five decades of sustainable growth, the company employs over 43,000 professionals dedicated to providing nutritious products under the principle: “Quality you can trust.”</p> <h3 >The Role: Industrial Refrigeration Engineer</h3> <p >Almarai is seeking an <strong >Industrial Refrigeration Engineer</strong> to join its supply chain team in Riyadh. This full-time role is essential for maintaining critical industrial refrigeration equipment, specifically large-scale ammonia, Freon, and glycol systems, to prevent product loss and ensure operational continuity. The position requires 2-5 years of relevant experience.</p> <h3 >Key Responsibilities</h3> <ul > <li >Ensure the consistent maintenance and reliability of all industrial Ammonia, Freon, and Glycol units.</li> <li >Execute routine maintenance and repair tasks for Ammonia, Freon, and Glycol systems in adherence to best practices, requirements, and established guidelines.</li> <li >Monitor and accurately record all operational parameters and relevant information within the assigned area.</li> <li >Guarantee the uninterrupted, trouble-free, and safe operation of all Ammonia and Freon refrigeration equipment.</li> <li >Prepare and submit regular reports, provide management with recommendations on required maintenance, and ensure all logbooks are complete and accurate.</li> </ul> <h3 >Experience Requirements</h3> <p >Candidates for this position should possess <strong >2 to 5 years of professional experience</strong> in industrial refrigeration engineering. This experience should include practical knowledge of large-scale ammonia, Freon, and glycol equipment maintenance and operation.</p> <h3 >Role Context</h3> <p >This role is integral to Almarai's extensive supply chain, directly impacting product quality and operational efficiency by ensuring the continuous and safe functioning of essential refrigeration infrastructure. The Industrial Refrigeration Engineer contributes to maintaining the company's high standards in food and beverage manufacturing and distribution.</p> <h3 >Application</h3> <p >Qualified individuals are invited to apply for this full-time Industrial Refrigeration Engineer position based in Riyadh.</p>

<h3 >About the Role</h3> <p >TawanTech is seeking a <strong >Senior Application Support Engineer - Tier 2</strong> to join its team in Riyadh, Riyadh Province. This full-time position is crucial for providing 24/7 production support for critical banking applications and services. The role involves resolving complex application incidents, leading troubleshooting and Root Cause Analysis (RCA), and coordinating with various technical teams to ensure the high availability and stability of banking systems.</p> <h3 >Key Responsibilities</h3> <ul > <li >Provide 24/7 Tier 2 application and production support through rotational shifts and on-call coverage.</li> <li >Support business-critical banking applications, ensuring high availability and service continuity.</li> <li >Lead the troubleshooting and resolution of P1/P2 incidents and major incidents.</li> <li >Perform detailed Root Cause Analysis (RCA) and drive permanent corrective actions.</li> <li >Monitor application health, performance, availability, and integration status.</li> <li >Analyze application, system, database, and middleware logs to identify and resolve issues.</li> <li >Troubleshoot issues across Production, UAT, SIT, and Development environments.</li> <li >Support application releases, deployments, patches, and configuration changes in accordance with banking change-management procedures.</li> <li >Coordinate with Development, Infrastructure, Database, Middleware, Network, Security, and Vendor teams to resolve complex incidents.</li> <li >Escalate code-level or unresolved issues to Tier 3 / Development teams with complete technical analysis.</li> <li >Ensure incidents and service requests are handled within agreed SLA and ITIL processes.</li> <li >Support Major Incident Management and provide timely technical updates to stakeholders.</li> <li >Identify recurring incidents and participate in Problem Management activities.</li> <li >Maintain technical documentation, support procedures, knowledge articles, and operational runbooks.</li> </ul> <h3 >Qualifications and Experience</h3> <ul > <li >Bachelor's degree in Computer Science, Information Technology, Engineering, or a related field.</li> <li >5–8+ years of experience in Application Support, Production Support, or Application Operations, particularly within banking, financial services, or other highly regulated environments.</li> <li >Strong L2 application and production support experience in a 24/7 shift-based environment, including handling P1/P2 incidents and Major Incident Management.</li> </ul> <h3 >Required Technical Skills</h3> <ul > <li >Strong troubleshooting and Root Cause Analysis (RCA) skills.</li> <li >Good knowledge of Linux/Unix and Windows environments.</li> <li >Strong SQL and database troubleshooting skills.</li> <li >Experience with REST/SOAP APIs, system integrations, middleware, and application servers.</li> <li >Familiarity with monitoring and observability tools such as Splunk, Dynatrace, AppDynamics, or Grafana.</li> <li >Strong understanding of ITIL Incident, Problem, and Change Management.</li> </ul> <h3 >Preferred Skills and Attributes</h3> <ul > <li >Experience supporting Java and/or .NET enterprise applications.</li> <li >Knowledge of Microservices and distributed systems.</li> <li >Experience with CI/CD tools like Jenkins, Git, or Azure DevOps.</li> <li >Exposure to Docker/Kubernetes.</li> <li >Experience with banking integrations, payment systems, digital channels, or core banking applications.</li> <li >ITIL certification is a plus.</li> <li >Good understanding of security, access control, audit, and compliance requirements in banking environments.</li> <li >Strong communication and stakeholder management skills.</li> </ul> <h3 >Work Environment and Expectations</h3> <p >This role operates within a 24/7 shift-based environment with on-call coverage, requiring support for production activities and critical business operations outside normal working hours when necessary. The Senior Application Support Engineer will also mentor junior support engineers and provide technical guidance to the L2 support team. Adherence to banking security, compliance, audit, and operational policies is essential.</p>

<p>Job Description Overview AtkinsR alis is seeking an experienced Site Engineer in Riyadh. This high-profile development integrates heritage, innovation, and sustainability across multiple cultural assets. The Site Engineer will coordinate scope of work for Exhibition Design Management &amp; Construction Supervision on Specialist Museums, Cultural Institutions &amp; Visitor Experience Projects . Your role The Site Engineer for Exhibition Design Management &amp; Construction Supervision is responsible for coordination, implementation, and delivery of world-class museum exhibitions and cultural experiences from concept design through fabrication, installation, commissioning, and handover. The role ensures that exhibition environments, interpretive displays, multimedia systems, showcases, graphics, artifacts, and visitor experience elements are delivered to the highest international standards while meeting project objectives, schedules, budgets, and conservation requirements. The specialist acts as the key interface between museum stakeholders, designers, architects, exhibit fabricators, contractors, multimedia integrators, conservators, and project management teams throughout the project lifecycle. Key Roles &amp; Responsibilities</p><p>1. Construction Supervision &amp; Site Management</p><ul><li>Coordinate exhibition fit-out and installation works on-site.</li><li>Monitor contractor and fabricator performance against approved drawings and specifications.</li><li>Conduct regular inspections to verify workmanship quality and compliance.</li><li>Review method statements, shop drawings, and material submittals.</li><li>Ensure exhibition construction activities comply with local regulations, international museum standards, and health and safety requirements.</li><li>Identify construction risks and implement mitigation strategies.</li><li>Coordinate installation sequencing to avoid conflicts between trades.</li></ul><p>2. Exhibition Fabrication Oversight</p><ul><li>Support support exhibit fabrication processes, including factory inspections and mock-up reviews.</li><li>Review prototypes, samples, and fabrication methodologies.</li><li>Verify fabrication quality and compliance with approved designs.</li><li>Monitor progress of fabrication packages and production schedules.</li><li>Coordinate logistics, transportation, and installation planning.</li><li>Ensure all fabricated components satisfy conservation and collection protection requirements.</li></ul><p>3. Museum Showcase &amp; Artifact Display Coordination</p><ul><li>Support design and manufacture of museum showcases and display systems.</li><li>Ensure compliance with artifact conservation requirements, including:</li><ul><li>Temperature control</li><li>Humidity management</li><li>Lighting limitations</li><li>Security requirements</li><li>Environmental monitoring</li></ul><li>Coordinate object mounting, artifact supports, and display fixtures.</li><li>Work closely with registrars, curators, and conservation teams throughout installation.</li></ul><p>4. Multimedia &amp; Interactive Experience Management</p><ul><li>Coordinate integration of multimedia and AV systems within exhibitions.</li><li>Support installation of:</li><ul><li>Interactive exhibits</li><li>Projection systems</li><li>LED displays</li><li>Immersive environments</li><li>Audio systems</li><li>Digital interpretation technologies</li></ul><li>Ensure all interactive experiences function according to approved user experience objectives.</li><li>Support testing and commissioning activities.</li></ul><p>5. Quality Assurance &amp; Compliance</p><ul><li>Implement exhibition quality control procedures.</li><li>Conduct site inspections and quality audits.</li><li>Verify compliance with:</li><ul><li>Design intent</li><li>Technical specifications</li><li>International museum standards</li><li>Accessibility standards</li><li>Safety regulations</li></ul><li>Track defects and manage snagging and close-out processes.</li><li>Review contractor quality documentation.</li></ul><p>6. Procurement &amp; Contract Administration</p><ul><li>Support procurement of exhibition contractors and specialist vendors.</li><li>Review technical bid submissions and evaluate contractor capabilities.</li><li>Participate in tender clarification processes.</li><li>Review variations, claims, and change requests.</li><li>Monitor contractual compliance and project deliverables.</li></ul><p>10. Testing, Commissioning &amp; Handover</p><ul><li>Support exhibition testing and commissioning activities.</li><li>Verify functionality of exhibition systems and visitor experiences.</li><li>Coordinate operational readiness reviews.</li><li>Support training of museum operations staff.</li><li>Ensure completion of punch lists and defect rectification.</li><li>Review as-built documentation, warranties, and maintenance manuals.</li><li>Support final handover and opening preparations.</li></ul><p><br></p><p><strong>Desired Candidate Profile</strong></p><p>Bachelor s or Master s degree in Architecture, Interior Design, Construction Management, Engineering, Museum Studies, Exhibition Design or a related field.</p><p>10+ years of experience in exhibition design, museum projects, cultural developments, or visitor attractions.</p><p>Proven experience delivering high-profile museum projects in the Middle East.</p><p>Experience supervising exhibition fit-out and specialist installation contractors.</p><p>Strong understanding of museum conservation and collection care requirements.</p><p>Experience with government, cultural, and heritage sector clients.</p><p><b>Technical Competencies</b></p><ul><li>Exhibition Design Development</li><li>Museum Planning</li><li>Construction Supervision</li><li>Fit-Out Management</li><li>Exhibit Fabrication</li><li>Showcase Design &amp; Installation</li><li>Multimedia Integration</li><li>Visitor Experience Design</li><li>Quality Assurance &amp; Quality Control (QA/QC)</li><li>Procurement &amp; Tender Management</li><li>Risk Management</li><li>Contract Administration</li><li>Stakeholder Engagement</li><li>BIM and Design Coordination</li></ul><p><b>Preferred Project Experience</b></p><ul><li>National Museums</li><li>Cultural District Developments</li><li>Heritage Interpretation Centers</li><li>Visitor Experience Centers</li><li>Science Museums</li><li>Children's Museums</li><li>Art Museums</li><li>Archaeological Museums</li><li>World Expo Pavilions</li><li>Immersive Cultural Attractions</li><li>UNESCO Heritage Visitor Facilities</li></ul>

Job description <div> <div> <p>We are building a new Systems-Level Integration (SLI) team focused on Smart high-performance Inertial Sensors and Systems. As a Machine Learning Engineer in our expanding Riyadh office, you will pioneer the use of Deep Learning to enhance the raw performance of MEMS IMU sensors.<br>In the initial phase of this role, you will focus entirely on software, simulation, and data-driven modeling. You will work with datasets provided by our core engineering team to train models that correct stochastic errors, denoise signals, and improve sensor performance.</p> <p> </p> <strong>What You Will Do</strong> <ul> <li> <p> <strong>Time-Series AI Development:</strong> Design, train, and validate neural networks (CNNs, LSTMs, TCNs, Transformers, etc ) to denoise raw inertial sensors data and fuse them for better performance.</p> </li> <li> <p> <strong>Virtual Sensing:</strong> Develop AI models that enhance MEMS IMU sensor outputs using self-supervised or supervised learning techniques.</p> </li> <li> <p> <strong>Data Pipeline Engineering:</strong> Build robust data processing pipelines to handle massive, high-frequency inertial systems datasets (filtering, normalization, augmentation, and windowing).</p> </li> <li> <p> <strong>Cross-Border Collaboration:</strong> Work closely with the Egypt-based Systems and Firmware teams to ensure your models are designed within the computational limits of edge microcontrollers (TinyML).</p> </li> <li> <p> <strong>Rapid prototyping: </strong>You will be implementing ML algorithms based on published academic research papers.</p> </li> <li> <p> <strong>Research: </strong>You will be required to regularly survey state-of-the-art academic research papers on the intersection of machine learning and inertial systems.</p> </li> <li> <p> <strong>Model Optimization:</strong> Quantize and prune trained PyTorch/TensorFlow models for eventual deployment on resource-constrained embedded targets (e.g., ARM Cortex-M).</p> </li> </ul> <p> </p> </div> </div> Job requirements <div> <div> <strong>(Must-Haves)</strong> <ul> <li> <p> <strong>Citizenship:</strong> This role is open to <strong>Saudi Nationals in line with local employment regulations</strong>.</p> </li> <li> <p> <strong>Education:</strong> BSc or MSc in Computer Engineering, Aerospace Engineering, Electrical/Mechanical Engineering, or a strictly related engineering field.</p> </li> <li> <p> <strong>SCE Membership</strong>: Engineer membership in the Saudi council of engineers (Engineer Grade category) is mandatory for this role.</p> </li> <li> <p> <strong>AI/ML Expertise:</strong> Strong hands-on experience with Deep Learning frameworks (PyTorch preferred) and a solid understanding of training models on <strong>time-series data</strong>.</p> </li> <li> <p> <strong>Coding:</strong> Python proficiency is mandatory, with strong software engineering practices (unit testing, modular code design).</p> </li> <li> <p> <strong>Version Control:</strong> Git proficiency is mandatory.</p> </li> </ul> <strong>The "Nice-to-Haves" (Bonus Points)</strong> <ul> <li> <p> <strong>Sensor Fusion Knowledge:</strong> Familiarity with classical inertial navigation concepts, attitude representations, Extended Kalman Filters (EKF), or AHRS algorithms.</p> </li> <li> <p> <strong>Physics-Informed Neural Networks (PINNs):</strong> Understanding of how to constrain AI models using the laws of physics (e.g., kinematics).</p> </li> <li> <p> <strong>Edge AI:</strong> Experience with machine learning model deployment on Microcontrollers, STM32Cube.AI , or ONNX runtime.</p> </li> </ul> <p> </p> <br><ul><li> </li> </ul> <p> </p> </div> </div> <div> <div></div></div>

<h3 >About Exequt MENA</h3> <p >Exequt MENA is a rapidly expanding consulting and technology services firm specializing in cybersecurity, Identity and Access Management (IAM), cloud solutions, AI-driven platforms, and custom software engineering. The company partners with public and private sector organizations across the Kingdom of Saudi Arabia to deliver high-impact digital transformation initiatives.</p> <h3 >The Opportunity</h3> <p >Exequt MENA is seeking a <strong >Privileged Access Management (PAM) Engineer</strong> to join its team in Riyadh, Saudi Arabia. This full-time role involves designing, implementing, and supporting enterprise PAM solutions. The successful candidate will apply hands-on expertise in BeyondTrust and/or WALLIX PAM to secure privileged accounts, sessions, and access within customer environments, working closely with cybersecurity, IAM, infrastructure, SOC, and IT teams. This position is suitable for candidates with 0-1 years of experience.</p> <h3 >Key Responsibilities: PAM Implementation &amp; Administration</h3> <p >The PAM Engineer will be responsible for a range of tasks related to PAM solution deployment and management, ensuring robust security for privileged access.</p> <ul > <li >Design, implement, and administer BeyondTrust Password Safe / Privileged Remote Access and/or WALLIX Bastion.</li> <li >Configure privileged account discovery, onboarding, and lifecycle management.</li> <li >Manage password vaults, credential policies, rotation, and reconciliation.</li> <li >Implement privileged session management, monitoring, recording, and auditing.</li> <li >Configure Role-Based Access Control (RBAC), approval workflows, least-privilege controls, and Just-In-Time (JIT) access.</li> <li >Manage privileged access for administrators, vendors, contractors, and remote users across various platforms, including Windows, Linux/Unix, databases, network devices, security appliances, and cloud environments.</li> <li >Configure application-to-application and service-account credential management.</li> </ul> <h3 >Key Responsibilities: System Integration</h3> <p >This role also involves integrating PAM solutions with existing enterprise systems and supporting various access methods to ensure seamless and secure operations.</p> <ul > <li >Integrate PAM with Active Directory / LDAP, Multi-Factor Authentication (MFA), and identity providers.</li> <li >Integrate PAM with Security Information and Event Management (SIEM)/Security Operations Center (SOC) and IT Service Management (ITSM) platforms, such as ServiceNow.</li> <li >Configure access via RDP, SSH, HTTPS, databases, and network devices.</li> <li >Support cloud/hybrid integrations and API-driven automation.</li> </ul> <h3 >Required Experience and Skills</h3> <p >Candidates should possess foundational knowledge and practical skills in Privileged Access Management to effectively contribute to client projects.</p> <ul > <li >0-1 years of professional experience in a relevant cybersecurity or IT field.</li> <li >Hands-on expertise with BeyondTrust and/or WALLIX PAM solutions.</li> <li >Understanding of cybersecurity principles and Identity and Access Management (IAM) concepts.</li> <li >Ability to work collaboratively with various technical teams, including cybersecurity, IAM, infrastructure, SOC, and IT.</li> </ul> <h3 >Compensation and Work Environment</h3> <p >This full-time position is based in Riyadh, Saudi Arabia. Compensation for this role is structured on a performance-based model.</p>

<h3 >About TAWANTECH and the Role</h3> <p >TAWANTECH is seeking a <strong >Senior Digital Channels Support Engineer</strong> to join its team in Riyadh, Saudi Arabia. This full-time role is critical for providing operational support for enterprise digital banking applications and customer-facing digital channels. The engineer will ensure the availability, performance, and reliability of digital services operating on a modern microservices architecture.</p> <h3 >Role Overview and Impact</h3> <p >As a key member of a 24x7 production support organization, the Senior Digital Channels Support Engineer leads the resolution of production incidents and monitors critical systems. This position involves troubleshooting complex application issues and collaborating extensively with development, infrastructure, DevOps, and business teams to maintain seamless digital banking operations.</p> <h3 >Key Responsibilities</h3> <ul > <li >Provide Level 2/Level 3 production support for Digital Channels applications.</li> <li >Lead troubleshooting and resolution of complex production incidents across distributed microservices environments.</li> <li >Monitor application performance, system health, and customer-facing services to ensure maximum availability.</li> <li >Perform Root Cause Analysis (RCA) and implement permanent solutions for recurring production issues.</li> <li >Analyze application logs, distributed traces, and infrastructure metrics using tools such as Splunk and Dynatrace.</li> <li >Support production deployments, releases, rollbacks, and post-deployment validation activities.</li> <li >Manage incidents, service requests, problems, and changes in accordance with established SLAs and ITIL processes.</li> <li >Support integrations with backend services, databases, middleware, and third-party systems.</li> <li >Collaborate with Development, Infrastructure, Database, Middleware, and DevOps teams to resolve production issues.</li> <li >Maintain operational documentation, runbooks, support procedures, and knowledge base articles.</li> <li >Identify opportunities for automation and continuous operational improvements.</li> <li >Mentor junior engineers and provide technical leadership during major production incidents.</li> </ul> <h3 >Required Experience and Technical Skills</h3> <ul > <li >6-10+ years of experience in Application Production Support.</li> <li >Minimum 4+ years of experience supporting enterprise Digital Channels or Digital Banking applications.</li> <li >Strong hands-on experience supporting Java (Quarkus)-based microservices.</li> <li >Experience working with OpenShift, containerized environments, and WebSphere.</li> <li >Strong knowledge of Oracle and Microsoft SQL Server databases.</li> <li >Proficiency in using Splunk and Dynatrace for production monitoring and troubleshooting.</li> <li >Experience supporting high-volume, customer-facing applications.</li> </ul> <h3 >Preferred Qualifications</h3> <ul > <li >Familiarity with Agile, DevOps, and CI/CD practices.</li> <li >Banking or financial services industry experience is highly preferred.</li> </ul> <h3 >Work Environment</h3> <p >This is a full-time position based in Riyadh, Saudi Arabia, operating within a 24x7 production support framework.</p>