Plumbing Engineer

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>This is a prestigious mega-infrastructure project in Riyadh being a cornerstone of the Kingdom’s strategic transportation network. Focused on constructing complex interchanges, bridges, and extensive road systems, the project aims to significantly reduce congestion and travel times while enhancing the overall quality of life for residents. Fully aligned with Saudi Vision 2030, this initiative supports economic growth through a modern, sustainable, and well-connected transport system. Joining this project offers a unique opportunity to contribute to a landmark development that will redefine urban mobility in the capital.</p><p><br></p><p><b>Responsibilities:</b></p><ol><li>Develop and maintain detailed project schedules for roads and bridges, utilizing Primavera P6 to create baseline schedules ensuring all activities, logic ties, and critical paths are accurately represented.</li><li>Perform Earned Value Management (EVM) analysis to monitor project health, focusing on Cost Performance Index (CPI) and Schedule Performance Index (SPI).</li><li>Identify schedule variances and proactively develop recovery plans or "what-if" scenarios to mitigate delays in complex infrastructure work-fronts.</li><li>Coordinate with site engineers and subcontractors to verify physical progress, ensuring the P6 schedule reflects the reality of on-site execution.</li><li>Prepare high-quality reporting packages, including Weekly Progress Reports (WPR), Monthly Progress Reports (MPR), and S-curves for internal management and stakeholder review.</li><li>Analyze Resource Loading and Histograms to identify potential bottlenecks in labor or equipment allocation across multiple project zones.</li><li>Support the Claims &amp; Contract team by providing detailed delay analysis when required.</li></ol><p><br></p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p><b>Qualifications &amp; Education:</b></p><p>Education: Bachelor’s degree in Civil Engineering from an accredited university.</p><p><br></p><p><b>Experience Requirements:</b></p><p>Total Experience: 10+ years of experience in large-scale infrastructure projects (bridges, underpasses, overpasses, highways).</p><p>Specific Role Experience: Minimum 5+ years specifically as a Senior Planning Engineer.</p><p>Regional Experience: Previous experience in Saudi Arabia or the Middle East is highly preferred.</p><p><br></p><p><b>Skills &amp; Competencies:</b></p><p>Languages: Excellent command of English (written &amp; spoken). Proficiency in Arabic is a plus.</p><p>Software: Expert proficiency in Oracle Primavera P6 (Advanced level), MS Project, and Excel (Advanced reporting/dashboards).</p><p>Soft Skills: Analytical mindset, detail-oriented, and able to work under tight deadlines in a fast-paced environment.</p></div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>1. Conduct on-site investigations and analyze data such as maps, reports, tests, and drawings.</p><p>2. Prepare technical and feasibility studies and design blueprints that meet engineering specifications.</p><p>3. Provide expertise in structural and civil engineering, construction, and maintenance while consulting with stakeholders to resolve emerging problems.</p><p>4. Perform evaluations and applied research to ensure the safe and efficient operation of structures, ensuring compliance with codes, laws, and regulations.</p><p>5. Prepare technical reports and recommendations to address and solve project challenges.</p><p>6. Recommend alternative solutions to engineering problems and oversee their implementation.</p><p>7. Confidently communicate with clients, contractors, and project teams to ensure smooth project execution.</p><p>8. Conduct feasibility assessments and site inspections to gather necessary project data.</p><p>9. Plan, prepare, and implement project schedules while overseeing their execution.</p><p>10. Research and prepare cost estimates for projects, ensuring accuracy and feasibility.</p><p>11. Collaborate with multidisciplinary teams to ensure effective and efficient operations.</p><p>12. Write, review, and approve technical reports, specifications, and project presentations.</p><p>13. Assist in defining the project scope, budget, and schedule for new engineering tasks.</p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p>1. Bachelor’s degree in civil engineering or Structural Engineering.</p><p>2. Minimum of 5 years of experience in engineering consultancy offices.</p><p>3. Proven expertise in structural design, analysis, and supervision of projects.</p><p>4. Strong written and verbal communication skills in English and Arabic.</p><p>5. Comprehensive knowledge of local building codes, regulations, and safety standards. And municipal requirements</p><p>6. Proficiency in engineering design programs such as AutoCAD - Revit - ETABS - SAP2000 - and Structural Analyzing programs.</p><p>7. Demonstrated experience in site layout, grading, and regulatory approvals.</p><p>8. Excellent project management skills with the ability to supervise and lead teams.</p><p>9. Professional Engineering License from the Saudi Council of Engineers (SCE).</p><p>10. Strong problem-solving skills and high attention to detail.</p><p>11. Ability to thrive in fast-paced environments, managing multiple tasks effectively.</p><p>12. Critical thinking skills with a high level of accuracy in structural calculations and design.</p><p>13. Excellent time management skills to meet project deadlines efficiently.&nbsp;</p></div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>WSP Middle East is seeking a Saudi National Graduate Engineer to join our Building Technology Systems (BTS) team in Riyadh. This role offers an excellent opportunity for a motivated graduate to develop a strong foundation in the design, coordination, and delivery of integrated building technology systems across major projects in Saudi Arabia. You will work under the guidance of experienced consultants and gain exposure to multidisciplinary projects involving smart buildings, digital infrastructure, and low voltage systems.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Bachelor s degree in Electrical Engineering, Electronics, Building Services, Mechatronics, or a related discipline</li><li>Fresh graduate or up to 1 2 years of relevant experience</li><li>Strong interest in building technology, smart systems, and digital infrastructure</li><li>Basic knowledge of low voltage systems and building services is an advantage</li><li>Good communication skills in English (Arabic is an advantage)</li><li>Proficient in MS Office; familiarity with AutoCAD/Revit is a plus</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Conduct electrical design review for all power and low current systems, ensuring compliance with project specifications, international standards, and data centre best practices. Review and validate designs for MV/LV distribution, UPS systems, generators, grounding, lighting, ELV systems, and critical power infrastructure. Supervise electrical works on site, ensuring quality, safety, and adherence to approved drawings and method statements. Coordinate with mechanical, architectural, ICT, and commissioning teams to ensure seamless integration of all electrical systems. Identify design gaps, technical risks, and constructability issues, proposing practical solutions. Support factory and site acceptance tests (FAT/SAT) for major electrical equipment. Monitor contractor progress, review technical submittments, and provide clear recommendations to the project leadership. Ensure all electrical installations meet the reliability and redundancy requirements of Tier rated data centre environments. Participate in commissioning activities and support final handover documentation.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Bachelor s degree in Electrical Engineering or a related discipline Minimum 12 years of experience in electrical engineering within large scale construction projects Proven experience in data centre, mission critical, or high reliability electrical systems Strong background in design review, site supervision, and multidisciplinary coordination Familiarity with international standards Excellent communication, problem solving, and stakeholder management skills</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>We are seeking a Survey Engineer with strong experience in utilities and infrastructure projects, specifically within a consultancy/PMC environment. The candidate will be responsible for ensuring accurate surveying, setting out, and compliance with project specifications across all site activities. Perform and supervise all surveying activities for utilities and infrastructure works (roads, drainage, water, sewer, etc.). Establish control points, benchmarks, and ensure precise setting out of works. Review contractor survey submissions, shop drawings, and as-built drawings. Verify survey data and ensure compliance with project specifications and QA/QC standards. Liaise with consultants, contractors, and site teams for coordination and issue resolution. Prepare and review survey reports, calculations, and documentation. Monitor contractor survey activities and ensure adherence to approved methodologies. Utilize Total Station, GPS (RTK), and leveling equipment effectively on site. Support progress measurement and quantity verification.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Bachelor s degree or Diploma in Surveying, Civil Engineering, or related field.</li><li>5 10 years of experience in utilities and infrastructure projects.</li><li>Mandatory experience working with engineering consultancy/PMC firms (consultant-side experience is required).</li><li>Strong knowledge of survey standards, QA/QC procedures, and site supervision practices.</li><li>Proficiency in AutoCAD and survey-related software.</li><li>Experience in KSA/GCC projects is preferred.</li><li>Strong coordination and communication skills.</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>To oversee, inspect, and ensure quality execution of all electrical works related to road and highway infrastructure projects, including street lighting, traffic management systems, and associated utility coordination, in compliance with project specifications, safety standards, and regulatory requirements.</p><p>1. Site Inspection &amp; Monitoring</p><ul><li>Inspect ongoing electrical works including:</li><ul><li>Street lighting systems (LED, solar, high mast)</li><li>Traffic signals and road safety systems</li><li>Cabling works (underground/overhead)</li><li>Electrical panels, feeder pillars, and junction boxes</li></ul><li>Verify that execution aligns with approved drawings, BOQs, and method statements.</li></ul><p>2. Quality Control</p><ul><li>Ensure materials and workmanship meet specified quality standards (IRC, IS, IEC, or relevant codes).</li><li>Check installation procedures and identify non-conformities.</li><li>Report defects and ensure timely corrective actions by contractors.</li></ul><p>3. Testing &amp; Verification</p><ul><li>Witness and verify electrical testing activities such as:</li><ul><li>Insulation resistance tests</li><li>Continuity tests</li><li>Earthing and grounding tests</li><li>Functional testing of lighting and signal systems</li></ul><li>Maintain proper records of all inspection and test results.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Diploma / ITI / Bachelor s Degree in Electrical Engineering or related field. Relevant certifications in electrical inspection or safety (preferred). Experience Requirements 3 7 years of relevant experience in electrical inspection. Prior experience in roads &amp; highways or infrastructure supervision projects is highly preferred. Hands-on experience in site inspection, testing, and quality control.</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>We are looking for a seasoned Infrastructure Engineer with extensive experience in roads and highway projects to lead site supervision activities in Saudi Arabia. The candidate will ensure compliance with design specifications, quality standards, and project timelines while coordinating with stakeholders for successful project delivery.</p><p>Supervise and monitor all on-site activities related to roads, highways, and associated infrastructure works . Ensure adherence to approved drawings, technical specifications, and safety standards. Review and validate construction plans, method statements, and material submittals. Conduct regular site inspections and prepare detailed progress reports. Coordinate with contractors, consultants, and project teams to resolve technical issues promptly. Manage project schedules, identify risks, and implement corrective measures to avoid delays.</p><p>Imagine a better future for you and a better future for us all. Work on landmark projects around the world and embrace opportunities to make an even bigger impact in the communities you care about. What if you could do the best work of your life and create a legacy for yourself? With us, you can. Apply today.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Bachelor s degree in Civil Engineering (mandatory).</li><li>Minimum 15 years of experience in infrastructure projects, specifically roads/highways .</li><li>Proven track record in site supervision for large-scale road and highway projects.</li><li>Strong knowledge of international and Saudi road design standards .</li><li>Excellent leadership, communication, and problem-solving skills.</li><li>Proficiency in project management tools and MS Office applications.</li><li>Experience with mega road/highway projects in the Middle East.</li><li>Familiarity with Saudi building codes and highway regulations .</li><li>PMP or equivalent certification is an advantage.</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>WSP is seeking an experienced Drainage Engineer to join our team for a significant road/highway project in Riyadh, Saudi Arabia. The successful candidate will have extensive experience in drainage design and supervision, ensuring that all drainage systems are designed and implemented to the highest standards of safety, functionality, and environmental sustainability.</p><p>Imagine a better future for you and a better future for us all. Work on landmark projects around the world and embrace opportunities to make an even bigger impact in the communities you care about. What if you could do the best work of your life and create a legacy for yourself? With us, you can. Apply today.</p><p><strong>Design and Analysis:</strong> Develop and review detailed designs for road and highway drainage systems. Perform hydraulic and hydrologic analysis using industry-standard software. Ensure compliance with local, national, and international design standards and regulations.</p><p><strong>Supervision and Management:</strong> Supervise the construction and implementation of drainage systems on-site. Oversee contractor work to ensure adherence to project specifications and quality standards. Coordinate with project managers, construction teams, and other engineering disciplines to ensure seamless integration of drainage solutions.</p><p><strong>Quality Control:</strong> Conduct site inspections and audits to ensure quality and safety standards are met. Resolve any issues or discrepancies that arise during construction promptly. Prepare and review reports, documentation, and as-built drawings.</p><p><strong>Stakeholder Engagement:</strong> Liaise with clients, government authorities, and other stakeholders to address drainage-related concerns and requirements. Present design proposals and project updates to clients and stakeholders.</p><p><strong>Environmental Compliance:</strong> Ensure all drainage designs are environmentally sustainable and comply with environmental regulations. Implement best practices for stormwater management and pollution control.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Bachelor s degree in Civil Engineering or a related field.</li><li>Professional Engineering (PE) license or equivalent certification is highly desirable.</li><li>Minimum of 15 years of experience in drainage engineering, with a focus on road and highway projects.</li><li>Proven experience in the supervision and management of drainage construction projects.</li><li>Extensive knowledge of hydraulic and hydrologic analysis software (e.g., HEC-RAS, SWMM, Civil 3D).</li><li>Excellent communication and interpersonal skills.</li><li>Ability to work effectively in a team environment and manage multiple tasks simultaneously.</li><li>Proficiency in project management software and tools.</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>WSP are currently seeking a Principal Engineer - Dry Utilities to join our team in Riyadh, Saudi Arabia. The successful candidates will lead and contribute to the design and implementation of electrical and power infrastructure projects in the Middle East. You will be responsible for producing engineering design solutions, models, reports and obtaining authority approvals for single and multi-disciplinary design infrastructure projects. BEng /BSc (Hon) or equivalent discipline with minimum 12 years post graduate experience, C.Eng &amp; PMP are an advantage. Member of/working towards associated Professional body membership. Modelling of power and lighting networks. Detailed design of engineering solutions. Good report writing skills. Compiling authority approval documentation in accordance with local authority standards to obtain approvals. Excellent speaking and writing communication skills in English. Imagine a better future for you and a better future for us all. Work on landmark projects around the world and embrace opportunities to make an even bigger impact in the communities you care about. What if you could do the best work of your life and create a legacy for yourself? With us, you can. Apply today. Provide Overall engineering solutions, analysis, specifications, and procurement support for the infra projects. Manage Opportunity &amp; Risk on the project. Aave a good knowledge of the contract and key clauses. Manage deliverables and provide the technical support to the team. Prepare time schedules, resource plan and assist in preparation of budgets. Lead bids/prospects, developing techno-commercial offers in liaison with internal and external parties. Manage projects execution till final delivery with NOC s, Monitor and control budget, invoices. Manage Engineers and CAD team and provide tech support. Design High Voltage, Medium voltage, Low Voltage, Street Lighting and Telecom networks for infrastructure, urban plan, roads, tunnels projects. Carry out Grounding, lightning protection, cable containments and shielding, Undertake the load flow analysis, short circuit, protection schemes, grounding system calculations. Produce reports, drawings, calculations and presentations. Attend meetings with authorities regarding utility design proposals. Aware of local authorities regulations in gulf region. Advise and present engineering solutions to clients and stakeholders. Familiar with Dialux, Amtech, ETAP, AutoCAD, Civil3D, Navisworks and Microsoft office to produce my deliverables. Follow the QA/QC in compliance with the requirement of the projects. Organize &amp;Attend progress meetings/communications with contractors, consultants and authorities. Minimize end users comments and hence ensure clients satisfaction and quality of deliverables. Ensure that the Design meets all relevant Codes and Standards. Review of Contractor shop drawings and materials submittals.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><h2>Qualifications</h2><ul><li>BEng /BSc (Hon) or equivalent discipline with minimum 12 years post graduate experience.</li><li>C.Eng &amp; PMP are an advantage.</li><li>Member of/working towards associated Professional body membership.</li></ul><h2>Skills</h2><ul><li>Modelling of power and lighting networks.</li><li>Detailed design of engineering solutions.</li><li>Good report writing skills.</li><li>Compiling authority approval documentation in accordance with local authority standards to obtain approvals.</li><li>Excellent speaking and writing communication skills in English.</li><li>Familiar with Dialux, Amtech, ETAP, AutoCAD, Civil3D, Navisworks and Microsoft office to produce my deliverables.</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>We are seeking an experienced Mechanical Engineer to join the supervision consultancy team for a large-scale infrastructure development project located approximately 100 km north of Jeddah . The selected candidate will assist the Resident Engineer in supervising mechanical and utility works on site, ensuring compliance with project specifications, approved drawings, and quality standards.</p><p>Supervise and monitor mechanical and utility construction works on site in accordance with approved drawings and project specifications. Assist the Resident Engineer (Mechanical) in overseeing mechanical infrastructure works. Inspect and supervise installation of potable water supply networks . Monitor works related to firefighting systems and associated infrastructure . Supervise installation of gas distribution networks . Monitor construction of stormwater drainage and sanitary sewage systems . Supervise installation of irrigation systems and landscape-related mechanical works . Ensure contractor compliance with approved method statements, drawings, and quality standards . Review contractor submissions including shop drawings and material submittals . Conduct site inspections and quality checks to ensure proper construction practices. Assist in preparing inspection reports, site reports, and progress updates . Identify and report technical issues, non-conformances, and delays to the Resident Engineer.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Bachelor s Degree in Mechanical Engineering or equivalent.</li><li>Minimum 8 years of experience in infrastructure construction or supervision projects.</li><li>Experience in utility infrastructure projects including potable water, firefighting, gas distribution, stormwater drainage, sanitary sewage, and irrigation systems.</li><li>Previous experience working with engineering consultancy firms in a supervision capacity is preferred.</li><li>Good knowledge of construction supervision, inspection procedures, and quality control standards .</li><li>Strong coordination, inspection, and reporting skills.</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>We are seeking an experienced Electrical Engineer to join the supervision consultancy team for a large-scale infrastructure development project located approximately 100 km north of Jeddah . The selected candidate will assist the Resident Engineer in supervising electrical infrastructure works on site, ensuring compliance with project specifications, approved drawings, and quality standards. Bachelor s Degree in Electrical Engineering or equivalent. Minimum 8 years of experience in infrastructure construction or supervision projects. Strong experience in power distribution (MV/LV), street lighting, and telecom infrastructure . Previous experience working with engineering consultancy firms in a supervision capacity is preferred. Good knowledge of electrical installation standards, inspection procedures, and quality control practices . Strong coordination, inspection, and reporting skills. Imagine a better future for you and a better future for us all. Join our close-knit community of talented individuals who share your passion for making a positive impact. Our global team includes more than 69,000 employees, working together to make a difference in communities both close to home and around the world. With us, you can. Apply today. Supervise and monitor electrical construction activities on site in accordance with project specifications and approved drawings. Assist the Resident Engineer (Electrical) in overseeing electrical infrastructure works. Supervise installation of power distribution networks (MV &amp; LV) . Monitor works related to street lighting systems and associated infrastructure . Supervise installation of telecom infrastructure , including ducts, chambers, and related systems. Coordinate electrical works with other utilities including road networks, water supply, sewage, stormwater, gas distribution, irrigation, and landscaping works . Ensure contractor compliance with approved method statements, drawings, and quality standards . Review contractor submissions including shop drawings, material submittents, and technical documents . Conduct site inspections and quality checks to ensure proper installation and construction practices. Assist in preparing inspection reports, progress reports, and technical documentation . Identify and report technical issues, non-conformances, and delays to the Resident Engineer.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Bachelor s Degree in Electrical Engineering or equivalent. Minimum 8 years of experience in infrastructure construction or supervision projects. Strong experience in power distribution (MV/LV), street lighting, and telecom infrastructure . Previous experience working with engineering consultancy firms in a supervision capacity is preferred. Good knowledge of electrical installation standards, inspection procedures, and quality control practices . Strong coordination, inspection, and reporting skills.</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Lead and supervise the construction and delivery of Information and Communications Technology (ICT) infrastructure and data centers, ensuring compliance with design specifications, technical standards, and regulatory requirements. Manage all phases of construction, including planning, procurement, execution, and handover, with a strong focus on quality, safety, and timely delivery. Coordinate with multidisciplinary teams architects, engineers, ICT specialists, and contractors to ensure seamless integration of building systems and ICT components. Monitor and control project progress, budgets, and schedules, implementing corrective measures to address delays or cost overruns. Ensure adherence to international and regional standards for ICT facilities, including cooling systems, cabling, power redundancy, and Tier certifications. Oversee risk management and quality assurance processes, conducting regular inspections and audits to maintain compliance and performance. Facilitate stakeholder communication, providing clear updates and reports to clients, consultants, and internal teams. Drive continuous improvement by applying best practices in supervision, construction delivery, and ICT infrastructure management.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>We are seeking an experienced Senior Project Manager to join our supervision consultancy team for a project in the North-West of Riyadh. The ideal candidate will lead complex projects, ensuring quality, compliance, and timely delivery across all phase. BSc in Construction Management, Engineering, Architecture, or equivalent. Overall Relevant Experience: 20 years Experience in Similar Role/Projects: 10 years Regional Experience: 5 years</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The Sr. Quality Control Engineer holds the responsibility for maintaining updated site activities on a daily basis, recording all quality observations on site. Duties shall include but not limited to ensuring that the contractor complies with the project s specifications in his submitted activities, manage and evaluate all processes and ensure efficient quality control within the projects; provide support to the construction team and to other Quality Control Specialists, and ensuring all work is in compliance with the contract requirements. With us, you can. Apply today.</p><p>Review and check vendors prequalification s Method statements, Inspection Test Plans (ITP), equipment data, material samples and/or manufacturers for compliance with contract drawings and specifications and project s quality system. Ensure that all requirements of the applicable specifications and drawings are complied with and report on deficiency corrections on-site. Establish and maintain robust procedures to develop standard documentation for the project s quality control and assurance; center and propose any improvements deemed necessary.</p><p>Conduct Inspections and Audits Plan and execute regular inspections and audits to verify compliance with quality standards and specifications. Implement the QA procedures and coordinate QC work with other technical disciplines to ensure safe and seamless management with all trades and activities. Coordinate testing and inspection of offsite materials storage and testing. Inspect all materials for compliance to submittals and drawings. Monitor the performance of all control activities and tests on building components. Direct, supervise and coordinate inspection/engineering QC activities. Troubleshoot and resolve problems relating to the activity quality control. Identify non-conformances, lead its investigation with the relevant departments; and evaluate contractors submitted corrective &amp; preventive action plan.</p><p>Participate in the development of the Commissioning plan, roles, and responsibilities. Implement a commissioning plan. Participate in and conduct Quality meetings with the contractor, Construction team and suppliers. Coordinate with Engineering team to resolve all construction issues, RFI s and conflicts. Review, assist and facilitate Daily Report process; keep an updated daily report; prepare and submit weekly and monthly quality reports. Maintain an up to date knowledge on various architecture engineering processes &amp; techniques and coordinate with other departments for the technical activities of projects'</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Bachelor's Degree and 15+ years of relevant experience. Demonstrate knowledge of production, construction techniques, procedures, codes, and standards across all disciplines. Thorough understanding of ISO 9001. Competent in the identification and management of problems and trends through defect analysis and workgroups. Requires knowledge of statistical principles and conducts statistical analysis. Intermediate skills with Microsoft Office Suite.</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>WSP in the Middle East are looking for a competent, passionate and driven Senior/Principal Engineer (ICT &amp; Security) to step into the role of Acting BTS Lead on some of the region s most high-profile projects.If you bring deep expertise in security &amp; ICT systems, a strong technical foundation, and the leadership skills to guide manage multidisciplinary teams across mega-scale, complex programs, we want to hear from you. Bachelor s or master s degree in electrical engineering, ICT, Systems Engineering, or a related field. Minimum 10 years of proven experience in ICT and security engineering with a track record of successfully leading large-scale or complex projects. Strong background in ICT and security systems, with proven experience on mega-scale projects in the region. Leadership capabilities to guide teams, manage stakeholders, and deliver challenging project conditions. BICSI certification preferred; additional ICT/Security-design related professional certificates are an advantage. Relevant engineering or ICT degree; advanced certifications a plus. Imagine a better future for you and a better future for us all. Work on landmark projects around the world and embrace opportunities to make an even bigger impact in the communities you care about. What if you could do the best work of your life and create a legacy for yourself? With us, you can. Apply today.</p><p>Act as BTS Lead, overseeing end-to-end design, development, and implementation of ICT and security systems for mega-scale projects. Lead, guide and review technical design of ICT and security infrastructure, ensuring compliance with global and local standards (BICSI, TIA, MOI,..etc) and client requirements. Provide technical guidance, mentorship and design assurance for multidisciplinary teams. Manage the integration of ICT and security systems across complex project environments. Coordinate and manage multiple stakeholders, including clients, contractors, and internal teams, to ensure alignment and smooth project delivery. Ensure project delivery, technical compliance, and high-quality documentation.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Bachelor s or master s degree in electrical engineering, ICT, Systems Engineering, or a related field. Minimum 10 years of proven experience in ICT and security engineering with a track record of successfully leading large-scale or complex projects. Strong background in ICT and security systems, with proven experience on mega-scale projects in the region. Leadership capabilities to guide teams, manage stakeholders, and deliver challenging project conditions. BICSI certification preferred; additional ICT/Security-design related professional certificates are an advantage. Relevant engineering or ICT degree; advanced certifications a plus.</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>As a Commissioning Engineer, you will be responsible for planning, executing, and overseeing the commissioning of the Sewage Treatment Plant (STP) and TSE pipeline to ensure that all systems and processes operate safely, efficiently, and in full compliance with design specifications, contractual requirements, and applicable regulatory standards. The role requires close coordination with design, construction, mechanical, electrical, and instrumentation teams, as well as effective engagement with project stakeholders. In your capacity as a Commissioning Engineer, you will lead pre commissioning and commissioning activities, including inspections, testing, start up, performance trials, and final handover of the STP. You will ensure that treatment processes consistently achieve the required effluent quality and that full operational readiness is established prior to final acceptance. Additionally, you will be responsible for achieving timely completion of project milestones within the approved budget and for providing regular progress updates to relevant stakeholders.</p><p>General:</p><ul><li>Plan and manage pre commissioning, commissioning, and start up activities for STP systems and TSE pipeline.</li><li>Supervise EPC Contractor s team during process commissioning of the complete sewage treatment plant.</li><li>Oversee and verify installation completion and readiness of civil, mechanical, electrical, and I&amp;C systems.</li><li>Coordinate testing of equipment such as pumps, blowers, screens, clarifiers, biological reactors (Nereda), filters, disinfection systems, sludge systems and odour control systems and TSE pipeline.</li><li>Lead process commissioning, including biological (Nereda based) seeding, stabilization, and optimization.</li><li>Monitor plant performance to ensure treated effluent meets statutory and contract requirements.</li><li>Review commissioning procedures, method statements, and test protocols.</li><li>Troubleshoot operational and process issues during start up and trial runs.</li><li>Coordinate with EPC Contractor and OEMs for equipment commissioning and performance testing.</li><li>Oversee compliance with HSE requirements during commissioning activities.</li><li>Prepare/Review and submit commissioning reports, performance test results, and handover documentation.</li><li>Support training of client s operations and maintenance (O&amp;M) staff.</li><li>Assist in final acceptance, defect liability support, and transition to O&amp;M phase.</li><li>Collaborate with project stakeholders and share progress report regularly</li><li>Ensure the timely completion of commissioning milestones within the allocated budget.</li><li>Regularly report on project progress to the relevant stakeholders.</li></ul><p>Team Leadership:</p><ul><li>Supervise the EPC Contractor s site team during commissioning.</li><li>Participate in site meetings, and other project-related meetings as required.</li><li>Offer guidance, training, and mentorship.</li><li>Cultivate a culture of safety and professionalism within the team.</li></ul><p>Quality Assurance:</p><ul><li>Establish and maintain robust quality control procedures for commissioning work.</li><li>Ensure adherence of Project Quality standard during commissioning phase</li></ul><p>Safety and Compliance:</p><ul><li>Ensure that commissioning activities are executed in a safe and efficient manner.</li><li>Ensure adherence of Safety regulations/compliance during testing and commissioning</li><li>Investigate and report any safety incidents or near misses.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Bachelor s degree in Environmental, Chemical, Mechanical Engineering, or a related discipline. Proven experience in STP / wastewater treatment plant commissioning and startup; strong experience in commissioning Nereda SBR systems will be considered a significant advantage. &gt; 10 years of relevant experience in process, mechanical, instrumentation, or commissioning roles, with a primary focus on wastewater and sewage treatment projects. In depth knowledge of local environmental regulations, discharge standards, and statutory compliance requirements.</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The Quality Engineer will support the supervision team in monitoring, evaluating, and ensuring that all highway construction works comply with project specifications, quality standards, and contractual requirements. The role requires strong technical knowledge of roads/highways, materials, and QA/QC processes, along with experience working on consultant-side supervision teams in the Middle East. Bachelor s Degree in Civil Engineering or related discipline. 12+ years of experience in QA/QC for highways/road construction projects. Prior experience working with engineering supervision consultants in KSA is highly preferred. Strong knowledge of highway materials, QA/QC procedures, test requirements, and international standards. Experience with large-scale infrastructure or expressway projects. Strong report writing, communication, and coordination skills. Imagine a better future for you and a better future for us all. Work on landmark projects around the world and embrace opportunities to make an even bigger impact in the communities you care about.</p><p><strong>Quality Assurance &amp; Compliance</strong></p><ul><li>Implement and monitor the project s Quality Management System (QMS) in line with client and consultant standards.</li><li>Review and approve Contractor s Quality Control procedures, ITPs, method statements, and material submissions.</li><li>Ensure compliance with project specifications, drawings, and international standards (e.g., ASTM, AASHTO, BS).</li><li>Conduct regular audits, inspections, and quality walkthroughs on-site.</li></ul><p><strong>Construction Supervision</strong></p><ul><li>Oversee quality aspects of roadworks, earthworks, drainage, utilities, pavement layers, asphalt works, and structures related to the highway.</li><li>Verify material testing results, laboratory reports, and ensure all tests are performed as per standards.</li><li>Monitor workmanship quality and highlight any non-conformities or deviations.</li></ul><p><strong>Documentation &amp; Reporting</strong></p><ul><li>Maintain detailed and accurate quality records, NCRs, CARs, inspection logs, and test reports.</li><li>Prepare weekly and monthly QA/QC reports for internal and client review.</li><li>Follow up with the contractor to ensure timely closure of NCRs and corrective actions.</li></ul><p><strong>Coordination &amp; Communication</strong></p><ul><li>Coordinate with REs, discipline engineers, the Contractor s QA/QC team, and the client regarding quality issues.</li><li>Provide technical support and guidance to site inspectors to enhance quality monitoring.</li><li>Participate in progress, technical, and quality meetings.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Bachelor s Degree in Civil Engineering or related discipline.</li><li>12+ years of experience in QA/QC for highways/road construction projects.</li><li>Prior experience working with engineering supervision consultants in KSA is highly preferred.</li><li>Strong knowledge of highway materials, QA/QC procedures, test requirements, and international standards.</li><li>Experience with large-scale infrastructure or expressway projects.</li><li>Strong report writing, communication, and coordination skills.</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>We are seeking an experienced Safety Engineer (HSE) to join the supervision consultancy team for a large-scale infrastructure development project located approximately 100 km north of Jeddah . The selected candidate will be responsible for monitoring and enforcing health, safety, and environmental standards on site to ensure all construction activities are carried out safely and in compliance with project requirements.</p><p>Monitor and enforce health, safety, and environmental (HSE) regulations on site. Ensure contractor compliance with project safety plans, procedures, and regulatory requirements . Conduct regular site safety inspections and audits to identify hazards and ensure safe working practices. Review contractor submissions including HSE plans, risk assessments, method statements, and safety procedures . Monitor construction activities related to road networks and multi-utility infrastructure , ensuring safety compliance for works including: Potable water networks Firefighting systems Gas distribution systems Stormwater drainage and sanitary sewage systems Power distribution (MV &amp; LV) Street lighting and telecom infrastructure Irrigation and landscape works Investigate incidents, accidents, and near misses , and ensure proper corrective and preventive actions are implemented. Conduct toolbox talks, safety awareness sessions, and safety training for site personnel. Ensure proper use of personal protective equipment (PPE) and safe work practices. Maintain and prepare HSE reports, inspection records, and safety documentation as required by the project. Coordinate with the supervision team and contractor to ensure continuous improvement of site safety performance .</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Bachelor s Degree in Engineering or a related discipline . Minimum 10+ years of experience in health and safety for infrastructure construction projects. Strong experience in road and multi-utility infrastructure projects . Previous experience working with engineering consultancy firms in a supervision capacity . Good knowledge of international HSE standards and construction safety practices . Strong communication, inspection, and reporting skills.</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p> <b>JOB PURPOSE</b> </p> <p>Unilever is the place where you can bring your purpose to life with the work that you do creating a better business and a better world. If you are interested to put industrial performance to the next level, then this role is just for you!</p> <p>You ll be part of a team that believes in doing work that matters for people and the planet.</p> <p> </p> <p>Because here, we don t just hire for jobs. We invite you to be part of something bigger.</p> <p> </p> <p> </p> <p> <b>KEY RESPONSIBILITIES</b> </p> <ul> <li>Deploy appropriate safety and environmental procedures for people, processes, materials, products, and equipment to ensure a safe working environment for the whole team.</li> <li>Researching, designing, and developing new equipment</li> <li>Develop standards</li> <li>Configuring and optimizing end-to-end industrial processes, from ideation to certification.</li> <li>Managing cost and time constraints</li> <li>Ensuring compliance with both internal and external protocols and regulations</li> <li>Running risk assessments of the equipment and processes being used</li> <li>Collecting data, writing reports, and presenting findings to senior management</li> <li>Oversees and assesses existing processes and workflows.</li> <li>Optimizes productivity by designing, implementing, and testing new procedures.</li> <li>Assembles reports to document process products changes.</li> <li>Tracks metrics to discover areas for improvement and monitor upgrades.</li> <li>Communicates findings and proposals to upper management.</li> <li>Utilizes process simulation software to test and find the most appropriate production strategies.</li> <li>Provides thorough instructions for the successful implementation of process changes.</li> <li>Conducts risk assessments.</li> <li>Assesses compliance with applicable safety and quality standards</li> <li>Contributes to departmental efforts by accomplishing related tasks as needed.</li> <li>Work towards achieving zero losses and zero waste on their respective lines.</li> <li>Create standards across all line activities (operation standards, technical standards, and standard losses methodology).</li> <li>Train line operators and create plans for their development and asses their capabilities.</li> <li>Data analysis for losses according to the MMP Code.</li> <li>Day-to-day follow-up on line performance and loss reporting.</li> <li>Participate in conducting trial and industrial tests of new types of packaging materials, raw materials and finished products</li> <li>Participate in projects to upgrade existing equipment, as well as purchase new ones.</li> </ul> <p> </p> <p> </p> <p> <b>REQUIRED QUALIFICATIONS</b> </p> <ul> <li>Degree in Engineering (Mechanical are preferred) discipline with a strong technical background</li> <li>Excellent analytical and math skills</li> <li>Continuous Improvement Mindset</li> <li>Coaching Skills</li> <li>Basic Technical Knowledge (Ability to Learn Advanced Technical Concepts)</li> <li>Data Analytics Skills</li> <li>Strong written and verbal communication skills</li> <li>Strong attention to detail</li> <li>Proven ability to identify, assess, and solve problems</li> <li>Proficient with computers and information technology</li> <li>Knowledge of process engineering software systems</li> <li>Familiarity with applicable health and safety regulations</li> </ul> <p> </p> <p> <b>PREFERRED QUALIFICATIONS</b> </p> <ul> <li>Loss Elimination Experience</li> <li>Relevant production experience</li> <li>Ability to use a simulation tool to analyse production line stoppages</li></ul></div></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li>Design and develop mechanical systems and components, ensuring they meet industry standards and function efficiently under specified conditions.</li><li>Conduct simulations and analyses using CAD software to predict product performance and identify potential design flaws before prototyping.</li><li>Lead projects from concept through production, coordinating with cross-functional teams to ensure timely delivery and adherence to specifications.</li><li>Evaluate and select materials for projects by assessing their mechanical properties, cost, and availability, while considering environmental impact.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>Bachelor's degree in Mechanical Engineering or a related field, with a strong foundation in thermodynamics, fluid dynamics, and materials science.</p></li><li><p>Professional Engineering (PE) license or working towards one, demonstrating commitment to ethical practices and professional development.</p></li><li><p>Minimum of 8 years of relevant work experience in mechanical design or product development, preferably in the automotive or aerospace industries.</p></li><li><p>Proficiency in CAD software such as SolidWorks or AutoCAD, with the ability to create detailed 3D models and technical drawings.</p></li></ul><p></p></section>

Position Overview:<br>Vapor VM is seeking an experienced GRC Engineer (Cyber Arrow GRC Administrator) to support a leading aviation-sector engagement in Jeddah. The role will focus on managing the Cyber Arrow GRC platform, strengthening security governance, supporting risk and compliance activities, and improving GRC processes.<br>Key Responsibilities:Administer and optimize the Cyber Arrow GRC platform, including users, roles, workflows, dashboards, and reporting. Manage risk registers, security controls, compliance records, and governance documentation. Support risk assessments, audits, control reviews, remediation tracking, and compliance reporting. Develop KPI/KRI dashboards and executive reports. Provide user support, documentation, and continuous GRC process improvements.<br>Requirements:<br>Bachelor’s degree in Cybersecurity, Information Security, Computer Science, or related field. Hands-on experience with Cyber Arrow GRC or similar GRC platforms. Strong understanding of GRC, risk management, security controls, and compliance frameworks. Experience supporting audits, reporting, and governance activities. Strong communication and stakeholder management skills.<br>Preferred Certifications:ISO 27001 Lead Implementer/Auditor, CISA, CRISC, CGRC, COBIT, or other cybersecurity/GRC certifications.