Mechanical Design Engineer Jobs in Saudi

<p>WSP in the Middle East is seeking a highly experienced Principal Structural Engineer (Airports) to join our team in Saudi Arabia. </p> <p>The successful candidate will play a key role in the design and delivery of major airport and aviation infrastructure projects across the Kingdom. We are looking for a structural engineering professional with 15+ years of experience and a proven track record in the design and delivery of large-scale airport terminals, aviation facilities, and associated infrastructure projects.</p> <ul> <li>Bachelor's Degree in Civil or Structural Engineering. Master's degree preferred.</li> <li>15+ years of structural engineering experience, with significant involvement in airport and aviation infrastructure projects.</li> <li>Proven experience in the design and delivery of airport terminals, aviation facilities, and associated infrastructure projects.</li> <li>Demonstrated experience leading structural engineering teams on large multidisciplinary projects.</li> <li>Strong knowledge of international structural design codes and standards.</li> <li>Experience working within a leading engineering consultancy environment.</li> <li>Chartered Engineer status or equivalent professional accreditation would be advantageous.</li> <li>Middle East project experience would be beneficial.</li> </ul> <ul> <li>Lead the structural design and delivery of major airport and aviation infrastructure projects across all project stages.</li> <li>Provide technical leadership for the design of airport terminals, concourses, support facilities, landside and airside structures.</li> <li>Manage multidisciplinary design coordination and interface with internal and external stakeholders.</li> <li>Oversee the preparation and review of structural calculations, reports, specifications, and design documentation.</li> <li>Ensure compliance with project requirements, relevant codes, international standards, and quality management procedures.</li> <li>Support project planning, resource allocation, and programme delivery to achieve project objectives.</li> <li>Provide technical guidance and mentorship to junior and intermediate structural engineers.</li> <li>Participate in design reviews, value engineering exercises, and technical workshops.</li> <li>Work closely with project directors and discipline leaders to ensure successful project delivery.</li> <li>Support the preparation of technical proposals, bids, and client presentations where required.</li> </ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>WSP in the Middle East is seeking a highly experienced Principal Structural Engineer (Airports) to join our team in Saudi Arabia.&nbsp;</p><br><p>The successful candidate will play a key role in the design and delivery of major airport and aviation infrastructure projects across the Kingdom. We are looking for a structural engineering professional with 15+ years of experience and a proven track record in the design and delivery of large-scale airport terminals, aviation facilities, and associated infrastructure projects.</p><br><br>Responsibilities:<br><ul><li>Lead the structural design and delivery of major airport and aviation infrastructure projects across all project stages.</li><li>Provide technical leadership for the design of airport terminals, concourses, support facilities, landside and airside structures.</li><li>Manage multidisciplinary design coordination and interface with internal and external stakeholders.</li><li>Oversee the preparation and review of structural calculations, reports, specifications, and design documentation.</li><li>Ensure compliance with project requirements, relevant codes, international standards, and quality management procedures.</li><li>Support project planning, resource allocation, and programme delivery to achieve project objectives.</li><li>Provide technical guidance and mentorship to junior and intermediate structural engineers.</li><li>Participate in design reviews, value engineering exercises, and technical workshops.</li><li>Work closely with project directors and discipline leaders to ensure successful project delivery.</li><li>Support the preparation of technical proposals, bids, and client presentations where required.</li></ul><br>Qualifications:<br><ul><li>Bachelor's Degree in Civil or Structural Engineering. Master's degree preferred.</li><li>15+ years of structural engineering experience, with significant involvement in airport and aviation infrastructure projects.</li><li>Proven experience in the design and delivery of airport terminals, aviation facilities, and associated infrastructure projects.</li><li>Demonstrated experience leading structural engineering teams on large multidisciplinary projects.</li><li>Strong knowledge of international structural design codes and standards.</li><li>Experience working within a leading engineering consultancy environment.</li><li>Chartered Engineer status or equivalent professional accreditation would be advantageous.</li><li>Middle East project experience would be beneficial.</li></ul> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> No experience required </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

In a world of possibilities, pursue one with endless opportunities. Imagine Next!<br><br>At Parsons, you can imagine a career where you thrive, work with exceptional people, and be yourself. Guided by our leadership vision of valuing people, embracing agility, and fostering growth, we cultivate an innovative culture that empowers you to achieve your full potential. Unleash your talent and redefine what’s possible.<br><br><strong>Job Description<br><br></strong>Parsons is looking for an amazingly talented<strong> BIM Coordinator – MEP</strong> to join our team! The BIM Coordinator – MEP Specialist will be responsible for reviewing and overseeing all Mechanical, Electrical, Plumbing, and Firefighting (MEP/FF) components of the models delivered by external design consultants and contractors. Operating in strict alignment with client requirements and the PMC BIM Management Plan, this role ensures seamless cross-discipline collaboration across all asset packages—specifically managing the intricate technical interfaces where MEP systems connect with architectural, structural, and civil infrastructure layouts—to uphold the high-quality technical standards, delivery timelines, and project specifications required across the masterplan.<br><br><strong>What You'll Be Doing<br><br></strong><ul><li>MEP Technical Review &amp; Quality Assurance (QA/QC) MEP Model Deliverable Review: Audit incoming MEP BIM models submitted by external consultants and contractors to verify compliance with the client Exchange Information Requirements (EIR) and the project BIM Execution Plan (BEP).</li><li>Information &amp; Asset Data Validation: Review and validate MEP asset metadata, equipment parameter completeness, and Level of Information Need (LOIN) to guarantee data integrity for future Asset Management handovers (AIM).</li><li>Compliance Reporting: Track and document the design/modeling progress of all appointed MEP supply chain parties, escalating non-compliance issues or data gaps directly to the PMC BIM Manager.</li><li> Ensure that the MEP models align with luxury design standards, integrating high-end materials, finishes, and bespoke elements.</li><li> Collaborate with other BIM specialists (architectural and structural/civil) to ensure a fully coordinated building model that addresses luxury project specifications.</li><li>Cross-Asset Coordination &amp; Interface Management: Facilitate coordination between architecture, structure, MEP, civil, and interior design teams, ensuring that all building elements are harmonized.</li><li>Lead Coordination Meetings: Chair and lead multi-party BIM coordination workshops, driving accountability among MEP design consultants and contractors to resolve spatial and asset interfaces.</li><li> Attend regular coordination meetings with consultants, contractors, and other stakeholders to review design progress and resolve any model conflicts.</li><li> Ensure that the building model is aligned with the aesthetic goals of the client and complies with luxury design expectations.<br><br><br></li></ul><strong>Clash Detection &amp; Resolution<br><br></strong><ul><li> Conduct clash detection using Navisworks or similar software, identifying and resolving conflicts between various building systems.</li><li> Proactively address design issues and provide BIM-based solutions to avoid construction delays and maintain high-quality outcomes.<br><br><br></li></ul><strong>Quality Control &amp; Compliance<br><br></strong><ul><li> Implement BIM quality control procedures to ensure the accuracy, consistency, and integrity of the building models.</li><li> Ensure that the design meets high-end luxury standards while adhering to the PMC’s quality management protocols.</li><li> Monitor and enforce compliance with BIM execution plans and industry standards (e.g., ISO 19650).<br><br><br></li></ul><strong>Risk Management &amp; Problem Solving<br><br></strong><ul><li> Identify potential design risks or constructability issues early in the project lifecycle, particularly in relation to luxury-specific design features.</li><li> Work closely with the project management team to mitigate risks through model adjustments and informed decision-making.<br><br><br></li></ul><strong>Training &amp; Development<br><br></strong><ul><li> Provide training and technical support to project teams, ensuring that all stakeholders understand and utilize BIM processes effectively.</li><li> Stay updated with the latest BIM technologies, tools, and workflows, incorporating new innovations relevant to luxury building projects. </li><li>BIM Software &amp; Technical Tool EcosystemThe candidate must possess strong proficiency and direct experience reviewing, navigating, and auditing models within the following toolsets:</li><li>MEP &amp; Buildings Modeling and Coordination: Autodesk Revit (Advanced MEP modeling, systems allocation, and lookup tables), Navisworks Manage for model coordination and clash coordination and other BIM-related software.</li><li>Infrastructure Utilities: Autodesk Civil 3D is mandatory, Bentley OpenRoads (for reviewing wet/dry infrastructure interfaces)</li><li>Review &amp; Clash Detection: Autodesk Navisworks Manage (Advanced use of Clash Detective, Search Sets, and Appearance Profiler) and/or Solibri Model Checker</li><li>Collaboration &amp; Issue Tracking: ACC/Forma Model Coordination Revizto, BIMtrack or any similar collaboration tool<br><br><br></li></ul><strong>What Required Skills You'll Bring<br><br></strong>Bachelor’s Degree in Mechanical Engineering, Electrical Engineering, or a related technical engineering or related field.<br><br>Minimum 12-15 years of experience in BIM management, with at least 10 years working on high-end luxury building projects in the construction industry. including a minimum of <strong>2 years working within a PMC, Client, or Lead Consultant role on mega-projects / master-planned developments</strong> with a heavy emphasis on complex MEP coordination.<br><br>Highly organized with commanding communication skills. Ability to lead technical alignment workshops and confidently enforce compliance with international Tier-1 consultants and contractors. <strong>Framework Standards:</strong> Strong practical knowledge of the <strong>ISO 19650</strong> framework and information management delivery cycles.<br><br><strong>What Desired Skills You'll Bring<br><br></strong>Certification in BIM management or Autodesk Revit (e.g., Autodesk Certified Professional).<br><br>Experience in PMC environments, working on large-scale luxury residential or hospitality projects.<br><br>Knowledge of sustainable building practices and integration of green technologies, tools and workflows, incorporating new innovations relevant to luxury building projects.<br><br>Parsons equally employs representation at all job levels no matter the race, color, religion, sex (including pregnancy), national origin, age, disability or genetic information.<br><br>We truly invest and care about our employee’s wellbeing and provide endless growth opportunities as the sky is the limit, so aim for the stars! Imagine next and join the Parsons quest—APPLY TODAY!<br><br>Parsons is aware of fraudulent recruitment practices. To learn more about recruitment fraud and how to report it, please refer to https://www.parsons.com/fraudulent-recruitment/.

<h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">About Ma'aden and the Geotechnical Engineer Role</h3> <p style="margin:0 0 12px; ************;">Ma’aden is seeking a <strong style="font-weight:700;">Geotechnical Engineer</strong> to join its team. This full-time position is designed for professionals with <strong style="font-weight:700;">0-1 years of experience</strong>, offering an opportunity to contribute to critical mining operations. The role involves supporting geotechnical engineering activities by managing ground conditions, hazards, and risks.</p> <h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">Role Purpose</h3> <p style="margin:0 0 12px; ************;">The Geotechnical Engineer provides essential technical input to ensure the safety and stability of mining environments. This includes conducting thorough field investigations, meticulously collecting and testing geotechnical data, and actively contributing to analysis and design processes. The primary objective is to effectively manage ground conditions, identify potential hazards, and mitigate risks across various mining operations.</p> <h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">Field Investigations and Geotechnical Testing</h3> <p style="margin:0 0 12px; ************;">The role requires hands-on involvement in assessing ground conditions and identifying potential risks. Key responsibilities in this area include:</p> <ul style="margin:0 0 12px; padding-inline-start:24px; list-style-type:disc; list-style-position:outside;"> <li style="margin:0 0 6px;">Conducting field investigations and surveys, which encompass geological mapping, soil sampling, rock core logging, and groundwater monitoring.</li> <li style="margin:0 0 6px;">Performing in-situ and laboratory tests on soil and rock samples using specialized equipment and techniques to determine their geotechnical properties and behavior.</li> <li style="margin:0 0 6px;">Maintaining and calibrating geotechnical equipment and instrumentation to ensure the provision of accurate and reliable monitoring data.</li> </ul> <h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">Data Analysis and Technical Support</h3> <p style="margin:0 0 12px; ************;">A significant aspect of this position involves the analysis of collected data and providing expert technical recommendations. Core duties include:</p> <ul style="margin:0 0 12px; padding-inline-start:24px; list-style-type:disc; list-style-position:outside;"> <li style="margin:0 0 6px;">Analyzing and interpreting geotechnical data, including slope stability, rock mass characterization, and groundwater modeling, to inform design recommendations and risk assessments.</li> <li style="margin:0 0 6px;">Providing technical support for critical areas such as slope stability assessments, foundation design, mine waste management, and ground control measures.</li> <li style="margin:0 0 6px;">Contributing to the development of effective mitigation solutions for identified geotechnical challenges.</li> </ul> <h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">Reporting and Documentation</h3> <p style="margin:0 0 12px; ************;">Clear and concise communication of findings is crucial for this role. The Geotechnical Engineer is responsible for preparing comprehensive documentation to convey technical information effectively. This includes:</p> <ul style="margin:0 0 12px; padding-inline-start:24px; list-style-type:disc; list-style-position:outside;"> <li style="margin:0 0 6px;">Preparing detailed geotechnical reports and other technical documents.</li> <li style="margin:0 0 6px;">Developing presentations, figures, charts, and diagrams to clearly communicate findings and recommendations to relevant stakeholders.</li> </ul> <h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">Candidate Profile</h3> <p style="margin:0 0 12px; ************;">The ideal candidate will possess a foundational understanding of geotechnical engineering principles and practices. This role is suitable for individuals with <strong style="font-weight:700;">0 to 1 year of relevant professional experience</strong>, demonstrating a strong aptitude for technical analysis, field work, and effective communication within a dynamic mining environment.</p>

<div dir="rtl"><h3 >نبذة عن الدور</h3> <p >تبحث شركة مجموعة عناب للمقاولات عن <strong >مهندس معماري</strong> للانضمام إلى فريقها في حائل. يتولى شاغل هذا الدور مسؤولية تصميم المباني الجديدة، والإشراف على التعديلات والإضافات للمباني القائمة، مع التركيز على الجودة والالتزام بالمعايير الهندسية. هذه الوظيفة بدوام كامل وتتطلب خبرة تتراوح بين 0-1 سنة.</p> <h3 >المهام والمسؤوليات الرئيسية</h3> <ul > <li >تصميم المباني الجديدة، وتطوير الملحقات أو التعديلات على المباني القائمة.</li> <li >تقديم الاستشارات الفنية المتعلقة بترميم الممتلكات القديمة والمحافظة عليها.</li> <li >المساهمة في اختيار مواقع المشاريع ومباشرة أعمال الإنشاءات.</li> <li >وضع التصاميم المعمارية لمشاريع الإنشاءات وإدارة فريق التصميم في اختيار المواد وتطوير المواصفات.</li> <li >إعداد النماذج الأولية والرسومات الفنية والنماذج الرقمية للمشاريع.</li> <li >المساعدة في عملية اختيار المقاولين وتحديد المواد المناسبة للمشاريع.</li> <li >تقديم الدعم الفني لمشروعات الإنشاء ومتابعة تنفيذ التصميم من قبل المقاولين.</li> <li >إعداد وتوثيق التقارير المتخصصة بالأعمال والمشروعات الهندسية، وتتبع نسب تقدمها، وعرضها وحفظها في قاعدة البيانات المعتمدة.</li> </ul> <h3 >المؤهلات والخبرات المطلوبة</h3> <ul > <li >درجة جامعية في الهندسة المعمارية أو مجال ذي صلة.</li> <li >خبرة عملية تتراوح بين <strong >0 إلى 1 سنة</strong> في مجال الهندسة المعمارية أو التصميم.</li> </ul> <h3 >المهارات والكفاءات</h3> <ul > <li >القدرة على وضع التصاميم المعمارية وإعداد الرسومات الفنية.</li> <li >معرفة جيدة بمواد البناء ومواصفاتها.</li> <li >مهارات التواصل الفعال والقدرة على العمل ضمن فريق.</li> <li >القدرة على إعداد الوثائق والتقارير الفنية.</li> </ul> <h3 >تفاصيل العمل</h3> <ul > <li >نوع الوظيفة: <strong >دوام كامل</strong>.</li> <li >الموقع: <strong >حائل</strong>، المملكة العربية السعودية.</li> </ul> <h3 >معلومات إضافية</h3> <p >الراتب لهذه الوظيفة <strong >غير معلن</strong> وسيتحدد بناءً على المؤهلات والخبرة. ندعو المهندسين المعماريين الطموحين الذين يستوفون المتطلبات للتقديم.</p></div>

<strong>Description<br><br></strong>Dimensional inspection of castings &amp; forgings against customer specifications and drawings in various stages of casting processes, to ensure the product dimensions meet customer requirements.<br><br><em>Dimensional Inspection<br><br></em><ul><li>Carry out dimensional inspection of castings as per drawings &amp; specifications.</li><li>Measure and accept as per ISO 8062 standard, or as per customer requirement or drawing.</li><li>Carry out visual inspection of castings and forgings on sample castings.</li><li>Conduct bulk casting / forgings audit inspection related to dimensional inspection.</li><li>Ensure casting marking and lettering as per customer drawings and specifications.<br><br></li></ul><em>Equipment &amp; Calibration<br><br></em><ul><li>Maintain measuring and test equipment in the area with calibration status.<br><br></li></ul><em>Non-Conformance &amp; Corrective Action<br><br></em><ul><li>Coordinate with concerned departments for corrective action in case of dimensional deviation on castings.</li><li>Follow up on casting dimensional correction against the dimensional report if any non-conformity is found.</li><li>Monitor dimensional related NCR effectiveness.<br><br></li></ul><em>Documentation<br><br></em><ul><li>Maintain dimension reports and relevant documents related to dimensional inspection.<br><br></li></ul><em>Standards Development<br><br></em><ul><li>Develop / assist QC Engineer to develop dimensional inspection standards.<br><br></li></ul><strong>Requirements<br><br></strong><em>Education<br><br></em><ul><li>ITI / Diploma in Mechanical Engineering or similar qualification (preferred).<br><br></li></ul><strong>Experience<br><br></strong><ul><li>Minimum 5 years of experience in dimensional inspection.</li><li>Experience in the steel casting / forging industry is essential.</li><li>Experience in CMM inspection and programming is preferred.<br><br></li></ul><em>Certifications<br><br></em><ul><li>NDE certification ASNT Level II in Visual Inspection is essential.</li><li>NDE certification ASNT Level II in MT / PT inspection is preferred.<br><br></li></ul><em>Technical Skills<br><br></em><ul><li>Proficiency in operating inspection equipment and understanding quality standards.</li><li>Ability to interpret engineering drawings and Geometric Dimensioning &amp; Tolerancing (GD&amp;T).</li><li>Ability to interpret ISO, ASME, and ASTM standards related to dimensional and visual inspection.</li><li>Knowledge of moulding and core assembly is essential.</li></ul>

<p>The Senior Project Engineer will be responsible for the end-to-end execution of assigned projects, from order handover through engineering, procurement, production, inspection/FAT, documentation and final delivery, ensuring compliance with customer specifications, quality requirements and committed schedules.</p><p><b><br></b></p><p><b>Key Responsibilities</b></p><ul><li>Manage assigned projects from order handover to final delivery and close-out.</li><li>Review POs, technical specifications, drawings, datasheets and project requirements.</li><li>Coordinate engineering activities including drawings, BOMs, technical submittals and customer approvals.</li><li>Coordinate with customers, consultants and internal teams to resolve technical queries and ensure timely project execution.</li><li>Work closely with Production, Procurement, Quality and Logistics to ensure materials, manufacturing and deliveries meet project schedules.</li><li>Manage projects involving Junction Boxes, Local Control Stations, Distribution/Control Panels and customized enclosure solutions, including hazardous-area applications.</li><li>Monitor project schedules, identify potential delays/risks and initiate necessary corrective actions.</li><li>Coordinate FATs, customer/third-party inspections and final project documentation.</li><li>Support projects for Saudi Aramco, SABIC, EPC contractors and other major industrial customers.</li><li>Monitor project scope and variations and highlight technical or commercial impacts to management.</li><li>Maintain effective customer communication and ensure timely resolution of projectrelated issues.</li><li>Ensure compliance with PMSA's Quality, Health, Safety and Environmental requirements.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor's Degree in Electrical, Instrumentation, Mechanical or related Engineering discipline.</li><li>Minimum 5-8 years of relevant project engineering/execution experience, preferably within Oil &amp; Gas, Petrochemical, Electrical/Instrumentation, EPC or Industrial Manufacturing.</li><li>Experience with Saudi Aramco, SABIC, EPC contractors or major industrial customers is highly preferred.</li><li>Knowledge of industrial enclosures, Junction Boxes, Control Panels and IECEx/ATEX/Ex e/Ex d hazardous-area applications is an advantage.</li><li>Experience in manufacturing coordination, FAT/inspection and project documentation.</li><li>Saudi Council of Engineers registration preferred.</li></ul>

<ol><li><p>Supervise and control daily <strong>FRP/GRP manufacturing and production activities</strong>.</p></li><li><p>Plan and allocate <strong>manpower, materials, machines and production resources</strong> according to production requirements.</p></li><li><p>Supervise production of <strong>FRP gratings, FRP/GRP tanks, manholes and other fiberglass-reinforced products</strong>.</p></li><li><p>Monitor production processes including <strong>molding, pultrusion, resin/fiberglass processing, fabrication, finishing and assembly</strong>, as applicable to the product.</p></li><li><p>Ensure daily and monthly <strong>production targets, schedules and output requirements</strong> are achieved.</p></li><li><p>Monitor product quality in coordination with the <strong>QA/QC team</strong> and ensure compliance with production specifications.</p></li><li><p>Identify production problems, process deviations, wastage and defects and implement corrective actions.</p></li><li><p>Coordinate with <strong>Maintenance, QA/QC, Stores and Engineering</strong> teams to ensure uninterrupted production.</p></li><li><p>Monitor raw-material consumption, production losses, rejection and wastage.</p></li><li><p>Supervise and guide production operators, technicians and shop-floor workers.</p></li><li><p>Ensure proper implementation of <strong>SOPs, work instructions, quality procedures and HSE requirements</strong>.</p></li><li><p>Prepare daily production reports covering <strong>output, manpower, material consumption, downtime and rejection</strong>.</p></li><li><p>Support process improvement initiatives to increase <strong>productivity, quality and manufacturing efficiency</strong>.</p></li></ol><p><strong>Desired Candidate Profile</strong></p><ol><li><p><strong>3+ years of relevant experience in FRP/GRP manufacturing or fiberglass composite products manufacturing.</strong></p></li><li><p>Experience in <strong>FRP/GRP factory production</strong> is mandatory/preferred.</p></li><li><p>Experience with <strong>FRP grating, GRP/FRP tanks, manholes, molded products, pultruded profiles or similar products</strong> will be highly preferred.</p></li><li><p>Previous experience as <strong>Production Supervisor / Production In-Charge / Production Engineer / Production Foreman / Production Manager</strong> in an FRP/GRP manufacturing environment.</p></li><li><p>Strong experience in <strong>production planning, manpower handling and shop-floor supervision</strong>.</p></li><li><p>Good understanding of FRP/GRP manufacturing processes and quality requirements.</p></li><li><p>Ability to troubleshoot production/process issues.</p></li><li><p>Diploma/Degree in <strong>Mechanical, Production, Plastic Engineering, Manufacturing or related discipline</strong> is preferred.</p></li></ol>

<div dir="rtl"><h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">نبذة عن الوظيفة</h3> <p style="margin:0 0 12px; ************;">تبحث شركة عبدالرحمن عثمان محمد العثمان وشريكه عن <strong style="font-weight:700;">مهندس ميكانيكي</strong> للانضمام إلى فريقها في الليث، مكة المكرمة. يركز هذا الدور بدوام كامل على دعم العمليات الهندسية الميكانيكية للمشاريع المختلفة. يتطلب الدور خبرة تتراوح بين 0-1 سنة، مما يجعله فرصة مناسبة للمهندسين الميكانيكيين في بداية مسيرتهم المهنية.</p> <h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">المهام والمسؤوليات الرئيسية</h3> <ul style="margin:0 0 12px; padding-inline-start:24px; list-style-type:disc; list-style-position:outside;"> <li style="margin:0 0 6px;">إعداد التصاميم والمخططات لمشاريع أعمال الهندسة الميكانيكية، مثل المولدات والتوربينات ووحدات التكييف والمراجل وشبكات التوزيع لأنظمة التدفئة والتكييف والتبريد.</li> <li style="margin:0 0 6px;">إعداد خطط وبرامج تجميع وتركيب التجهيزات الميكانيكية للمشاريع الصناعية، وتحديد أنظمة الضبط والتحكم فيها.</li> <li style="margin:0 0 6px;">إعداد برامج تشغيل المعدات وبرامج الصيانة الوقائية بحسب تعليمات الشركات الصانعة، ومتابعة إجراءات تنفيذها.</li> <li style="margin:0 0 6px;">تطوير أساليب وإجراءات العمل ومواكبة التطورات التقنية في المجال.</li> <li style="margin:0 0 6px;">إعداد الوثائق والتقارير المتخصصة بالأعمال والمشروعات الهندسية ونسب تقدمها، وعرضها وتوضيحها.</li> <li style="margin:0 0 6px;">حفظ الوثائق والتقارير في قاعدة البيانات الخاصة بها وفقاً للسياسات والإجراءات المعتمدة.</li> </ul> <h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">المتطلبات الأساسية</h3> <ul style="margin:0 0 12px; padding-inline-start:24px; list-style-type:disc; list-style-position:outside;"> <li style="margin:0 0 6px;">خبرة عملية تتراوح بين <strong style="font-weight:700;">0-1 سنة</strong> في مجال تشغيل وصيانة الأنظمة الميكانيكية بالمباني والمرافق والمواقع بمختلف تقنياتها.</li> <li style="margin:0 0 6px;">خبرة عملية في تشغيل واستخدام المعدات والآليات الفنية الخاصة بالأنظمة الميكانيكية.</li> <li style="margin:0 0 6px;">معرفة تامة بطرق وأسس إصلاح وصيانة الأنظمة الميكانيكية في المباني والمرافق.</li> </ul> <h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">المهارات والمعرفة المطلوبة</h3> <ul style="margin:0 0 12px; padding-inline-start:24px; list-style-type:disc; list-style-position:outside;"> <li style="margin:0 0 6px;">القدرة على إدارة ومتابعة تنفيذ كافة الأعمال في الموقع بكفاءة.</li> <li style="margin:0 0 6px;">القدرة على إيجاد الحلول السريعة والفعالة للمشاكل والعقبات التي قد تظهر في المواقع.</li> <li style="margin:0 0 6px;">معرفة تامة بأسس واشتراطات السلامة والصحة المهنية المتعلقة بالعمل.</li> </ul> <h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">بيئة العمل</h3> <p style="margin:0 0 12px; ************;">تُقدم هذه الوظيفة بدوام كامل في الليث، مكة المكرمة، ضمن فريق عمل متخصص في شركة عبدالرحمن عثمان محمد العثمان وشريكه. يتوقع من شاغل الوظيفة العمل في بيئة ديناميكية تتطلب المتابعة الميدانية والتعامل مع تحديات مختلفة.</p> <h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">معلومات إضافية</h3> <p style="margin:0 0 12px; ************;">هذا الدور مخصص للمرشحين ذوي الخبرة من 0 إلى 1 سنة. سيتم تحديد الراتب بناءً على المؤهلات والخبرة بعد المقابلة.</p></div>

<div dir="rtl"><h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">نبذة عن الدور</h3> <p style="margin:0 0 12px; ************;">تبحث مؤسسة التشييد المميز للمقاولات عن <strong style="font-weight:700;">مهندس ميكانيكي</strong> للانضمام إلى فريقها في نجران. هذا الدور بدوام كامل ومخصص للمهندسين ذوي الخبرة الحديثة، حيث يتطلب خبرة عملية تتراوح بين 0-1 سنة. سيساهم شاغل الوظيفة في إعداد التصاميم والمخططات الهندسية، وتطوير برامج التشغيل والصيانة للمعدات الميكانيكية ضمن مشاريع المؤسسة.</p> <h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">الهدف من الوظيفة</h3> <p style="margin:0 0 12px; ************;">يتولى المهندس الميكانيكي مسؤولية شاملة تبدأ من إعداد التصاميم والمخططات لمشاريع الهندسة الميكانيكية، مروراً بوضع برامج تجميع وتركيب وتشغيل التجهيزات الميكانيكية في المشاريع الصناعية. كما يشمل الدور إعداد برامج تشغيل المعدات الصناعية وبرامج الصيانة الوقائية، بالإضافة إلى إعداد الوثائق والتقارير المتخصصة بنتائج الأعمال الهندسية.</p> <h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">المهام والمسؤوليات الرئيسية</h3> <ul style="margin:0 0 12px; padding-inline-start:24px; list-style-type:disc; list-style-position:outside;"> <li style="margin:0 0 6px;">إعداد التصاميم والمخططات لمشاريع أعمال الهندسة الميكانيكية، بما في ذلك المولدات والتوربينات ووحدات التكييف والمراجل وشبكات التوزيع لأنظمة التدفئة والتكييف والتبريد.</li> <li style="margin:0 0 6px;">تطوير خطط وبرامج تجميع وتركيب التجهيزات الميكانيكية للمشاريع الصناعية، وتحديد أنظمة الضبط والتحكم اللازمة.</li> <li style="margin:0 0 6px;">إعداد برامج تشغيل المعدات وبرامج الصيانة الوقائية وفقاً لتعليمات الشركات المصنعة، ومتابعة إجراءات تنفيذها بفعالية.</li> <li style="margin:0 0 6px;">تطوير أساليب وإجراءات العمل بشكل مستمر ومواكبة أحدث التطورات التقنية في مجال الهندسة الميكانيكية.</li> <li style="margin:0 0 6px;">إعداد الوثائق والتقارير المتخصصة بالأعمال والمشروعات الهندسية، وتوثيق نسب تقدمها، وعرضها وتوضيحها، وحفظها في قاعدة البيانات الخاصة بها بما يتوافق مع السياسات والإجراءات المعتمدة.</li> </ul> <h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">المؤهلات والخبرات المطلوبة</h3> <ul style="margin:0 0 12px; padding-inline-start:24px; list-style-type:disc; list-style-position:outside;"> <li style="margin:0 0 6px;">شهادة جامعية في الهندسة الميكانيكية أو مجال ذي صلة.</li> <li style="margin:0 0 6px;">خبرة عملية تتراوح بين 0-1 سنة في مجال الهندسة الميكانيكية.</li> <li style="margin:0 0 6px;">القدرة على إعداد التصاميم والمخططات الفنية.</li> <li style="margin:0 0 6px;">معرفة ببرامج تشغيل وصيانة المعدات الميكانيكية.</li> </ul> <h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">بيئة العمل</h3> <p style="margin:0 0 12px; ************;">يعمل المهندس الميكانيكي ضمن فريق مؤسسة التشييد المميز للمقاولات في مدينة <strong style="font-weight:700;">نجران</strong>. يتطلب الدور التزاماً بدوام كامل في بيئة عمل تركز على تنفيذ المشاريع الهندسية بكفاءة ودقة.</p> <h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">التقديم</h3> <p style="margin:0 0 12px; ************;">ندعو المهندسين الميكانيكيين المؤهلين والمهتمين بهذا الدور في نجران لتقديم طلباتهم.</p></div>

<p><strong>Job title- Senior Design Electrical Engineer - SHQJEDD</strong></p><p>Email Id - recruitment.me@tractebel.engie.com</p><p>While Applying - please mention in subjectline - Position and Location Jeddah</p><p><strong>Roles and responsibilities</strong></p><p><br></p><p>The Senior Design Electrical Engineer shall be responsible for preparation of specifications, design review coordination, design works management with the Contractor, Consultant, internal coordination with other disciplines, etc. </p><p><strong>Experience and Skill set</strong></p><p><br></p><p>The candidate shall be a bachelor engineering degree holder approved by Saudi Council of Engineers) in the <strong>Electrical discipline</strong> having minimum of 10 years of related experience in large Thermal Power Projects. </p><p>The candidate should have experience in design and Engineering and review of EPC submitted Engineering review of the Electrical discipline related documents, including Master Documents List (MDL), design criteria, schematic diagrams, SLD’s, interface drawings, load lists, Electrical Equipment GA drawings, Review design calculations, studies, review and verify calculations, review Manuals, Attend FAT (if required) and review FAT procedures and reports, Construction, commissioning reliability, and performance test procedures and reports, Method statements for construction/installation, Vendor materials Procurement review, review of proposed vendors / suppliers design/drawings, design and field changes (as required), as built drawings, Review of studies, Electrical Hazop, Risk assessment and mitigation, review of proposed vendors / suppliers design documents. IFC/AFC/AFI drawings, red markup and as built drawings, evaluation of claims and change orders and close out report of LSTK Steam Power Plant Gas Conversion Project including responsible for all the design review scope and activities of base and detailed Engineering submittals/ drawings/ documents as stipulated above in based and detailed engineering review. </p><p>The candidate shall have thorough knowledge of relevant International Standards, and should be proficient in the relevant design software. He shall be well versed in MS Office and familiar with MIS. He should have good English communication skill and leadership qualities. </p><p><br></p><p><strong>Education and Previous Experience</strong></p><p><br></p><p>Bachelor Electrical Engineering degree holder approved by Saudi Council of Engineers and have a minimum of Ten (10) years of relevant experience in large Thermal Power Projects.</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Date Posted:</b></p><br><br>2026-09-28&amp;#xa;&amp;#xa;<p><b>Country:</b></p><br><br>United States of America&amp;#xa;&amp;#xa;<p><b>Location:</b></p><br><br>US-AL-HUNTSVILLE-315 ~ 315 Bob Heath Dr ~ BOB HEATH&amp;#xa;&amp;#xa;<p><b>Position Role Type:</b></p><br><br>Onsite&amp;#xa;&amp;#xa;<p><b><span>U.S. Citizen, U.S. Person, or Immigration Status Requirements:</span> </b></p><br><br>The ability to obtain and maintain a U.S. government issued security clearance is required.​ U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance&amp;#xa;&amp;#xa;<p><b>Security Clearance Type: </b></p><br><br>DoD Clearance: Secret&amp;#xa;&amp;#xa;<p><b>Security Clearance Status: </b></p><br><br>Active and existing security clearance required after day 1<br><br><p>Are you ready to explore the world of aerospace and defense? Do you want to learn from and collaborate with some of the greatest minds in the industry? At RTX, our internships, co-ops and full-time careers provide an exceptional foundation to work on complex problems, advance your skills and create a safer, more connected world. Discover opportunities to make a difference at RTX.</p><br><br><br><p><b>What You Will Do</b></p><br><br><p>The Mechanical Analysis and Test (MA&amp;T) Department is responsible for ensuring structural and thermal design robustness across the Raytheon portfolio of products. From preliminary concepts to fielded weapon system support, MA&amp;T delivers innovative structural and thermal engineering solutions utilizing methods ranging from classical fundamental &amp; empirically based techniques to state-of-the-art finite element methods leveraging industry leading commercial tools; all complimented and validated by tests executed in a manner to ensure cost effective yet technically balanced solutions.</p><br><br><br><p>As an intern in the Analysis and Test Department, you will be working one on one with a senior engineer, tackling thermal analysis tasks that will give you a great hands-on learning experience. You will be responsible for performing the analyses/tests, getting the results peer-reviewed, and documenting the results in a report.</p><br><br><br><p><b>Key Responsibilities</b></p><br><br><ul><li>Perform hand calculations and determine requirements for higher order detailed analysis</li><li>Perform detailed thermal analyses to solve challenging problems</li><li>Perform peer reviews of all analysis to validate process and results</li><li>Deliver results to customers</li><li>Generate detailed, archival technical reports</li></ul><br><p><b>Qualifications You Must Have </b></p><br><br><br><ul><li>Must be pursuing Bachelor’s or Advanced STEM or related degree and actively enrolled through the completion of the internship/co-op session.</li><li>Must have a minimum of 60 hours of credit by the start of the internship / co-op session.</li><li>Experience with engineering Finite Element Analysis tools and software such as ANSYS Workbench, Patran, Nastran and/or Thermal Desktop</li></ul><br><p><b>Qualifications We Prefer</b></p><br><br><ul><li>Experience with Microsoft Office programs: Word, Excel, Outlook, PowerPoint</li><li>Experience utilizing CAD (Computer Aided Design) tools such as CREO</li><li>Experience with problem solving using data-driven approaches</li></ul><br><p><b>What We Offer</b></p><br><br><br><ul><li>Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Trust, Respect, Accountability, Collaboration, and Innovation.</li></ul><br><ul><li>Relocation Eligibility</li></ul><br><p><b>Learn More &amp; Apply Now!</b></p><br><br><p>Please consider the following role type definition as you apply for this role.</p><br><br><br><ul><li><u>Onsite</u>: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.</li></ul><br><br><p><i><b>As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend&nbsp;select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.</b></i></p><br><br><br>The salary range for this role is 37,000 USD - 82,000 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills.<br><br><br>Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.<br><br>Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance.<br><br>This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply.<br><br>RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.<br><br><p><span><i>RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.</i> </span></p><br><br><br><br><p><b>Privacy Policy and Terms:</b></p><br><br><p><span>Click on this </span>link<span> to read the Policy and Terms</span></p><br><br><br> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> No experience required </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

<strong>Together we make the difference<br><br></strong>We are a leading provider of innovative and high-performance solutions for airport logistics. Our portfolio includes products and solutions for baggage and cargo handling, high-end software for the digitalization of logistics processes as well as an extensive range of maintenance and services. Major customers include renowned airports and airlines around the globe.<br><br>Be part of our Quality Management team as a <strong>Quality Engineer - Mechanical in Jeddah, KSA.<br><br></strong><strong>What are my responsibilities?<br><br></strong><strong>Quality Control Management<br><br></strong><ul><li>Guide and control suppliers, subcontractors, and in-house teams to comply with project quality plans and quality control documentation.<br><br></li></ul><strong>Quality Control Documentation<br><br></strong><ul><li>Develop and Implement project-related documentation including Inspection, Test Plans, Records, Method Statements, Supplier Quality Requirements collation and analysis for supplier approval.</li><li>Prepare and submit technical documentation such as Inspection Requests (IR), Material Inspection Requests (MIR), supplier and subcontractor submittals, and End-Project Documentation.</li><li>Plan and prepare internal project status meeting data to ensure that it is in line with the planned project schedule.<br><br></li></ul><strong>Quality Management System<br><br></strong><ul><li>Proactively assist in implementing the project quality plan and organizational quality management system, including procedure development, work instructions, forms, etc.</li><li>Document &amp; records control, control of nonconformity, corrective action, internal audit, identification and implementation of improvement opportunities.</li><li>Comprehensive knowledge of fundamentals of quality and the ability to communicate them to new and existing staff using a quality awareness slide presentation Knowledge of ISO 9001:2015 is a definitive edge.<br><br></li></ul><strong>Embedded Quality In Processes And Projects<br><br></strong><ul><li>Carry out supplier audits, incoming inspections, in-process inspections, installation and commissioning inspections using appropriate documentation and recording of inspection (FAT &amp; SAT) and test results.</li><li>Identify and take appropriate action for nonconformity and corrective action.<br><br></li></ul><strong>QC Reporting<br><br></strong><ul><li>Prepare and deliver regular work reports.</li><li>Plan and manage work schedules to meet project deadlines.</li><li>Ensure the quality inspection status overview and Global List of Open Points (GLOP) are updated regularly.</li><li>Follow-ups with the subcontractor/concerned department(s) to close the open snags/non-conformities.<br><br></li></ul><strong>Continuous Improvement<br><br></strong><ul><li>Actively identify improvement opportunities and provide solutions for change.</li><li>Apply standard quality control tools such as histograms, control charts, cause and effect diagrams, Pareto analysis, scatter diagrams, and charts to present the case for change and improvement. <br><br></li></ul><strong>What do I need to qualify for the role?<br><br></strong><ul><li>Bachelor’s degree in mechanical engineering.</li><li>Minimum 6-8 years’ experience in Quality Controls in a Project-based environment. </li><li>Knowledge in steel fabrication &amp; installation is a definitive edge.</li><li>A good understanding of SCADA/PLC systems is an advantage.</li><li>Knowledge of business functions and processes and ability to analyze key operational control requirements for the process.</li><li>Clear direction and decision-making to ensure controls are maintained.</li><li>Multicultural project teams and understand the values of controlled diplomacy and assertiveness to achieve objectives.</li><li>Hands-on experience in conducting data analysis and reporting statistics.</li><li>Diligence with great attention to detail, and good organizational skills.</li><li>Excellent English communication skills.<br><br></li></ul><strong>Diversity &amp; Inclusion<br><br></strong>Vanderlande is an equal opportunity/affirmative action employer. Qualified applicants will be considered without regards to race, religion, color, national origin, gender, sexual orientation, age, marital status, or disability status.

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> About this Position Join Henkel and play a key role within our Adhesive Technologies business, supporting customers across South Australia with industry-leading LOCTITE solutions. Based in Adelaide, SA, this is an exciting opportunity for a technically minded and customer-focused Sales Engineer to combine engineering expertise, technical consulting, and business development to deliver solutions that improve reliability, performance, and productivity across a diverse range of industries. <p>In this hands-on customer-facing role, you will provide technical support, identify customer opportunities, and develop engineering solutions using LOCTITE products. Working closely with customers, distributors, and internal teams, you will troubleshoot challenges, lead product trials, deliver technical training and demonstrations, and drive new business opportunities across key industrial sectors.&nbsp;<br></p><br> What you´ll do <ul> <li>Provide technical application support and engineering solutions across LOCTITE maintenance, repair, reliability, and industrial assembly products.</li> <li>Partner with customers to identify opportunities, troubleshoot technical challenges, improve equipment reliability, and optimise processes.</li> <li>Conduct customer site visits, plant surveys, product trials, and technical assessments to develop tailored LOCTITE solutions.</li> <li>Identify and develop new business opportunities across key industrial sectors, including mining, manufacturing, food &amp; beverage, utilities, transport, defence, and agriculture.</li> <li>Drive competitive conversions and growth through technical value selling and strong customer engagement.</li> <li>Deliver technical training, workshops, product demonstrations, and best-practice recommendations to customers and distributors.</li> <li>Manage customer projects and trials from initial opportunity through to successful implementation, collaborating with internal sales, technical, product, and marketing teams.</li> <li>Maintain strong safety, compliance, and documentation standards while supporting revenue growth, customer satisfaction, and long-term customer relationships.</li> </ul> <br><br> What makes you a good fit <ul> <li>3+ years’ experience&nbsp;in industrial technical&nbsp;sales, application/sales&nbsp;engineering, maintenance&nbsp;engineering, or reliability&nbsp;engineering.</li> <li>Strong understanding of&nbsp;mechanical systems, industrial&nbsp;maintenance practices,&nbsp;and engineering principles.</li> <li>Excellent communication,&nbsp;presentation, and customer&nbsp;engagement skills, with&nbsp;confidence presenting at&nbsp;workshops and industry&nbsp;events.</li> <li>Engineering qualifications&nbsp;in Mechanical, Chemical, Industrial, or a&nbsp;related discipline are&nbsp;desirable.</li> <li>Experience with adhesives, sealants, lubricants,&nbsp;coatings, industrial consumables, asset reliability, or&nbsp;heavy industry environments&nbsp;is advantageous.</li> <li>Proficient in Salesforce&nbsp;or similar CRM&nbsp;systems, with a&nbsp;current driver’s licence&nbsp;and willingness to&nbsp;travel throughout South&nbsp;Australia.</li> </ul> Some perks of joining Henkel <ul> <li>Flexible work scheme with flexible hours, hybrid work model, and work from anywhere policy for up to 30 days per year</li> <li>Diverse national and international growth opportunities</li> <li>Global wellbeing standards with health and preventive care programs</li> <li>Gender-neutral parental leave for a minimum of 8 weeks</li> <li>Employee Share Plan with voluntary investment and Henkel matching shares</li> <li>Flexible Public Holidays</li> <li>Company Products Allocation</li> </ul> <p>At Henkel, we come from a broad range of backgrounds, perspectives, and life experiences. We believe the uniqueness of all our employees is the power in us. Become part of the team and bring your uniqueness to us! We welcome all applications across different genders, origins, cultures, religions, sexual orientations, disabilities, and generations.</p><br> <br> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> No experience required </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

<p>The Presales Engineer owns the technical side of the bid process. The role is responsible for translating client requirements, tender documents, and site conditions into <strong>costed, compliant, practical, and buildable solutions</strong> across ICT infrastructure and physical security / ELV systems.<br></p><p>The Presales Engineer will develop technical designs, drawings, BOQs, compliance statements, and technical proposals that support successful bids, while ensuring a smooth handover to the project delivery team.<br></p><strong>Key Responsibilities<br></strong><ul> <li><p>Analyse RFPs, RFIs, tender specifications, drawings, and site conditions to identify scope, gaps, risks, and requirements.<br></p></li> <li><p>Design end-to-end ICT infrastructure and physical security / ELV solutions.<br></p></li> <li><p>Prepare technical designs, AutoCAD drawings, BOQs, material take-offs, compliance matrices, and technical proposals.<br></p></li> <li><p>Perform technical calculations for CCTV coverage, VMS storage, bandwidth, PoE, UPS, fibre links, rack elevations, heat loads, cable lengths, and pathway capacity.<br></p></li> <li><p>Select appropriate products and technologies based on technical requirements, cost, lifecycle, licensing, and client standards.<br></p></li> <li><p>Conduct site surveys, walk-downs, and as-built verification.<br></p></li> <li><p>Present solutions to clients, consultants, and end users and participate in technical clarification meetings.<br></p></li> <li><p>Coordinate with OEMs and distributors for technical support, pricing, product information, and authorisations.<br></p></li> <li><p>Support demonstrations, proof-of-concepts, and pilot setups.<br></p></li> <li><p>Provide a complete technical handover to the project delivery team and support submittals, RFIs, and design changes during execution.<br></p></li></ul>Requirements<br><ul> <li>5+ years of experience in presales, solution design, or design engineering within a systems integrator, ELV contractor, or technology vendor.<br></li> <li><p>Demonstrable experience managing tenders end-to-end, including solution design, BOQ, compliance statements, and technical proposals.<br></p></li> <li><p>Strong knowledge of structured cabling, copper and fibre infrastructure, LAN/WAN, switching, routing, VLANs, PoE, Wi-Fi, and data centre/server room infrastructure.<br></p></li> <li><p>Strong knowledge of CCTV, VMS, access control, intrusion detection, intercom, barriers, turnstiles, and ELV systems.<br></p></li> <li><p>Experience with VMS platforms such as Milestone, Genetec, Bosch, Axis, Hanwha, Hikvision, or equivalent.<br></p></li> <li><p>Proficiency in <strong>AutoCAD</strong> and experience producing technical drawings to a professional production standard.<br></p></li></ul><strong>What We're Looking For<br></strong><ul> <li><p>A technically strong and commercially aware Presales Engineer who can take ownership of the complete bid process.<br></p></li> <li><p>Someone who can translate complex client requirements into practical, compliant, and cost-effective solutions.<br></p></li> <li><p>Strong analytical and problem-solving skills with excellent attention to detail.<br></p></li> <li><p>Excellent technical writing, presentation, and communication skills.<br></p></li> <li><p>Ability to work effectively with clients, consultants, vendors, commercial teams, and project delivery teams.<br></p></li> <li><p>A proactive individual who can manage multiple tenders and deadlines while maintaining a high standard of quality.<br></p></li> <li><p>Strong understanding of both <strong>technical design and commercial considerations</strong>.<br></p></li> <li><p>A team player who takes ownership from initial enquiry through to successful project handover.</p></li></ul><p><br></p>

Hiring A Field Specialist for Oil & Gas exploration services.<br>Drill-bit field experience. Knowledge and experience with Underreamer operations would be an added advantage.<br>============================================The assignment will be fixed for 3 months with a Fixed Total salary as a package, and Field bonus of 150$ per day on the field. Client will be offering all the trainings, Safety induction, medical check, PPE, and transportation to and from Site. After the 3 months period, the assignment will be under on-call basis.================================================<br>Responsibilities Perform drill-well-on-paper planning and pre-job execution to align with the client's drilling program. Analyze client requirements and recommend appropriate drill bit selection and drilling parameters. Optimize drilling performance (ROP, bit life, dull grading) while ensuring safe execution. Provide on-site technical support during drilling operations across multiple well profiles, including deep gas wells. Conduct post-run analysis and reporting to support continuous improvement. Uphold QHSE standards, hazard identification, and safe work practices at all times. Coordinate with rig crews, clients, and internal teams to ensure smooth operations. Drill-bit field experience. Knowledge and experience with Underreamer operations would be an added advantage.(Where applicable) Support QA/QC activities, tool/equipment maintenance oversight, and review of process/technical packages. Qualifications & Experience Bachelor's degree in Mechanical Engineering (or related engineering discipline).3-5 years of field experience as a Drilling Field Engineer / Bit Man Prior experience with drill bit / drilling services providers or oilfield service companies. Experience with drilling performance optimization and pre-job engineering. Skills & Competencies Strong technical understanding of drilling operations and drill bit performance. Excellent communication and teamwork skills; comfortable in multi-disciplinary, client-facing environments. Strong safety orientation Flexible and adaptable to rotational / field-based assignments.

<ul><li><p>Position Summary</p><p>We are looking for a hands-on Site Mechanical Engineer to lead the construction, repair and rework of aboveground storage tanks — both <strong>new tank erection</strong> and <strong>modification / repair of existing (in-service and out-of-service) tanks</strong>. The role covers day-to-day site execution, welding and quality control, NDT and testing, painting/coating/insulation/cladding supervision, and direct interface with the Client and Third-Party Inspection.</p><p>The successful candidate will own the technical and quality record of the tank scope: raising and closing <strong>MIRs and WIRs</strong>, running inspections against the approved <strong>ITP</strong>, issuing <strong>progress reports</strong>, and preparing <strong>replies to Client comments</strong> on drawings, method statements and quality documents. This is a lead role for someone who stays organised and decisive under schedule pressure.</p><p>Key Responsibilities</p><p>1. Site Execution & Leadership</p><ul><li><p>Lead the site mechanical team (foremen, fitters, welders, riggers, scaffolders) for tank erection, dismantling, repair and rework activities.</p></li><li><p>Execute new tank construction to <strong>API 650</strong> (petroleum/petrochemical) and <strong>AWWA D100</strong> (welded steel water tanks), including bottom laying, shell erection (jacking or conventional), roof structure, nozzles, appurtenances and internals.</p></li><li><p>Plan and supervise <strong>rework and repair of existing tanks</strong>: shell/bottom plate replacement, annular plate renewal, lap-patch and insert-plate repairs, roof and floating-roof repairs, nozzle re-pad and re-rating, settlement correction, and re-inspection to <strong>API 653</strong> principles.</p></li><li><p>Review IFC drawings, isometrics, GADs and shop details; verify constructability and raise TQs/RFIs for any discrepancy before work starts.</p></li><li><p>Control plate marking, cutting, rolling, fit-up, alignment, roundness, plumbness, peaking and banding tolerances within code limits.</p></li><li><p>Coordinate with civil, E&I, piping and scaffolding disciplines; manage material take-off, receipt and site stock to keep the front open.</p></li><li><p>Drive daily/weekly targets, resource loading and look-ahead schedules to protect the completion date.</p></li></ul><p>2. Welding Engineering & Inspection</p><ul><li><p>Verify <strong>WPS, PQR and WPQ/WQT qualification in accordance with ASME Section IX</strong> (and AWS D1.1 where applicable) prior to production welding.</p></li><li><p>Conduct <strong>welder performance qualification testing</strong>, maintain the welder register, continuity records and welder identification/stamp control.</p></li><li><p>Monitor essential variables in production: joint preparation, fit-up gap, root gap, preheat/interpass temperature, consumable control (baking, holding, issue and return), heat input and welding sequence to control distortion.</p></li><li><p>Perform <strong>visual weld inspection</strong> before, during and after welding; identify defects, issue and track repair maps, verify repair welding and re-inspection.</p></li><li><p>Control weld traceability: weld maps, weld numbering, welder-to-joint traceability and repair rate monitoring.</p></li></ul><p>3. Quality Testing & NDT</p><ul><li><p>Implement and sign off the approved <strong>ITP</strong> and quality plan for each tank.</p></li><li><p>Plan, witness and evaluate NDT: <strong>RT, UT, MT, PT, VT</strong>, vacuum box testing, diesel/kerosene penetration testing of lap welds, and air testing of reinforcing pads.</p></li><li><p>Supervise <strong>hydrostatic testing</strong>: fill/discharge plan, fill rates and hold periods, foundation <strong>settlement survey</strong> readings, tank tightness verification, and safe dewatering and disposal.</p></li><li><p>Verify calibration status of all inspection, measuring and test equipment.</p></li><li><p>Carry out material verification: MTC/mill certificate review, PMI where specified, heat number traceability and marking transfer.</p></li><li><p>Raise, investigate and close <strong>NCRs</strong>, punch lists and site observations; drive root-cause and corrective action.</p></li></ul><p>4. Documentation, MIR / WIR & Approvals</p><ul><li><p>Raise, submit and follow through <strong>Material Inspection Requests (MIR)</strong> and <strong>Work Inspection Requests (WIR)</strong> with the Client and Third-Party Inspector — including scheduling, hold/witness point notification and closure.</p></li><li><p>Prepare and submit <strong>method statements, ITPs, JSAs, inspection checklists and test packs</strong> for approval.</p></li><li><p>Prepare structured, technically sound <strong>replies to Client and consultant comments</strong> on drawings, submittals and quality documents; track comment status through to code A/approval.</p></li><li><p>Compile the final <strong>QA/QC dossier / handover package</strong>: as-built drawings, MTCs, welder qualifications, weld maps, NDT reports, hydrotest and settlement records, coating and insulation records, calibration certificates and release notes.</p></li></ul><p>5. Progress Reporting & Client Interface</p><ul><li><p>Issue <strong>daily, weekly and monthly progress reports</strong> covering physical progress, manpower and equipment histograms, weld and NDT statistics, quality metrics, delays, constraints and recovery actions.</p></li><li><p>Update planned vs. actual progress (S-curve), support the planning engineer with earned-value inputs and change/variation notification.</p></li><li><p>Represent the company in site progress and technical meetings; present status clearly and defend the technical position with code references.</p></li><li><p>Act as first point of contact for the Client, PMC and Third-Party Inspectors on all tank-related technical matters.</p></li></ul><p>6. Painting, Coating, Insulation & Cladding</p><ul><li><p>Supervise surface preparation and blasting to the specified standard (e.g. SSPC-SP / ISO 8501-1 Sa 2½), and verify surface profile, cleanliness, salt contamination, dust and ambient conditions (temperature, RH, dew point, steel temperature) before application.</p></li><li><p>Monitor coating application, WFT/DFT readings, recoat intervals, curing, <strong>holiday/pinhole testing</strong> and adhesion testing; verify internal linings where applicable.</p></li><li><p>Supervise <strong>thermal insulation and cladding</strong>: insulation material and thickness verification, banding, weather sealing, aluminium/stainless cladding installation, vapour barrier integrity and finishing quality.</p></li><li><p>Verify coating and insulation records form part of the handover dossier.</p></li></ul><p>7. HSE & Compliance</p><ul><li><p>Enforce site HSE requirements: confined space entry, work at height, hot work permits, lifting operations, scaffolding inspection, gas testing and LOTO.</p></li><li><p>Ensure all activities comply with the permit-to-work system, project specifications and Client standards (e.g. Saudi Aramco SAES/SAIC, SABIC, Royal Commission or municipal water authority requirements as applicable)</p></li></ul></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p><strong>Bachelor's degree (or Diploma with strong equivalent site record) in Mechanical Engineering.</strong></p></li><li><p><strong>5 to 10 years' experience</strong> in aboveground storage tank construction, repair and inspection — including a proven record on <strong>both new tanks and rework/repair of existing tanks</strong>.</p></li><li><p><strong>Valid Saudi driving licence</strong> (mandatory) and willingness to travel between site locations.</p></li><li><p><strong>Welding inspection certification</strong> — CSWIP 3.1, AWS CWI or equivalent recognised qualification.</p></li><li><p><strong>NDT certification</strong> — ASNT Level II (or ISO 9712 Level II) in RT, UT, MT and PT (minimum two methods; RT/UT interpretation preferred).</p></li><li><p>Demonstrated working knowledge of <strong>API 650, API 653, AWWA D100, ASME Section IX and ASME Section V</strong>.</p></li><li><p>Transferable Iqama / valid right to work in KSA (for candidates already in Kingdom).</p></li></ul><p>Preferred / Advantageous</p><ul><li><p><strong>API 653</strong> Aboveground Storage Tank Inspector certification.</p></li><li><p>NACE/AMPP CIP Level II or BGAS-CSWIP painting inspector certification.</p></li><li><p>API 620, AWS D1.1, ASME Section VIII Div. 1 exposure.</p></li><li><p>Client-approved status with a major operator (Aramco, SABIC, SWCC/SWPC, Marafiq or similar).</p></li><li><p>Saudi Aramco SAP/e-Permit and Client portal document-control experience.</p></li><li><p>Proficiency with AutoCAD, MS Project or Primavera P6, and MS Excel-based reporting.</p></li></ul><p>Skills & Competencies</p><ul><li><p><strong>Languages and client handling:</strong> Professional working English is essential. Working Arabic is a strong advantage. Proven ability to communicate effectively with a multicultural project environment — Arabic-speaking clients and authorities, Asian site workforces and subcontractors, and European or American engineering consultants and inspectors.</p></li><li><p><strong>Leadership:</strong> Able to take full ownership of the tank scope, direct a mixed-nationality site team, and hold subcontractors to schedule and quality commitments.</p></li><li><p><strong>Performance under pressure:</strong> Comfortable managing hold points, inspection backlogs, hydrotest windows and shutdown/turnaround deadlines without losing quality control discipline.</p></li><li><p><strong>Technical communication:</strong> Clear, concise, code-referenced written English for reports, replies to comments, NCR responses and technical clarifications.</p></li><li><p><strong>Problem solving:</strong> Practical judgement on site issues — fit-up deviations, distortion, repeated weld rejections, settlement anomalies and coating failures.</p></li></ul>

<h3>About the Role of Corrosion Engineer</h3><p>ArcelorMittal Tubular Products Al-Jubail is seeking an experienced Corrosion Engineer to join its team in Al Jubail, Eastern Region. This full-time role focuses on developing corrosion-resistant pipe products for critical applications across various industries. The successful candidate will be instrumental in evaluating materials, designing innovative anti-corrosion solutions, and optimizing product performance.</p><h3>Role Purpose and Scope</h3><p>The Corrosion Engineer will be responsible for advancing corrosion control strategies for products used in the oil and gas (OCTG and line pipe), geothermal energy, hydrogen transportation, and carbon capture sectors. This position requires collaboration with interdisciplinary teams to enhance efficiency and sustainability, with a strong emphasis on technological advancements and adherence to industry standards.</p><h3>Key Responsibilities</h3><ul><li>Develop and optimize corrosion-resistant solutions specifically for OCTG and line pipe applications.</li><li>Collaborate with Metallurgy engineers to design and develop steel alloys tailored for oil and gas, geothermal energy, hydrogen transportation, carbon capture, and other relevant applications.</li><li>Evaluate material performance under corrosive conditions and conduct laboratory tests to ensure compliance with industrial standards such as NACE MR0175 or ISO 15156.</li><li>Oversee testing protocols to verify that products meet industry standards and regulatory requirements.</li><li>Monitor production processes, including clean steel production for sour and corrosion applications, to ensure alignment with design specifications and quality standards.</li><li>Partner with industry experts to integrate technological advancements into steel alloy design strategies.</li><li>Lead initiatives incorporating cutting-edge technologies to address emerging corrosion trends.</li><li>Collaborate with technology, quality, and operations teams to optimize product performance and ensure design objectives are met.</li><li>Ensure compliance with environmental, health, and safety regulations, maintaining familiarity with international standards.</li><li>Provide technical support to engineering teams, ensuring corrosion control measures are effectively integrated into design.</li><li>Prepare detailed reports, analyses, and recommendations based on corrosion assessments and testing results.</li><li>Offer training on corrosion techniques and best practices to relevant stakeholders.</li></ul><h3>Qualifications and Experience</h3><ul><li>A minimum of 10 years of experience in corrosion engineering.</li><li>Demonstrated expertise in corrosion science and engineering.</li><li>Familiarity with the oil and gas, geothermal energy, hydrogen transportation, and carbon capture industries.</li><li>Strong focus on technological advancements in corrosion prevention and material science.</li></ul><h3>Work Environment</h3><p>This is a full-time position based in Al Jubail, Saudi Arabia, requiring active collaboration within a professional engineering and manufacturing environment.</p><h3>Application Process</h3><p>Interested candidates are invited to apply. Salary details will be discussed during the interview process.</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span></span><p>.</p><br>Job Purpose <br> <p>To lead and manage the design and development of electrical systems and components for various projects, ensuring functionality, safety, and compliance with relevant standards and regulations.</p><br> <br> <br> <br> <br> <br> <br><br>Key Accountability Areas <br><ul> <li><strong>Design and Development:</strong>&nbsp;Design electrical systems and components using CAD software (e.g., AutoCAD, REVIT) and specialized design tools. Develop detailed drawings, schematics, and specifications.</li> <li><strong>Electrical Systems Design</strong>: Design and engineer electrical systems for buildings, industrial facilities, or infrastructure projects, including power distribution, lighting, fire alarm, security and control systems.</li> <li><strong>Compliance and Regulation</strong>: Ensure compliance with relevant electrical codes, standards, and regulations, such as the National Electrical Code (NEC), International Building Code (IBC), and local building and safety code (SBC).</li> <li><strong>Collaboration:</strong>&nbsp;Collaborating with multidisciplinary teams, including engineers, architects, contractors, and clients, to coordinate electrical design activities.</li> <li><strong>Load Calculations and Analysis:</strong>&nbsp;Conduct load calculations and electrical system analysis to ensure proper sizing and performance of electrical equipment and systems, considering factors such as voltage drop, short-circuit currents, and fault protection</li> <li><strong>Quality Control</strong>: Review and verify the accuracy of electrical drawings to ensure they meet project requirements and adhere to quality standards.</li> <li><strong>Problem-solving</strong>: Identify and resolve technical issues or discrepancies in electrical designs, working closely with the engineering team as needed.</li> <li><strong>Communication</strong>: Effectively communicate with internal teams and external vendors to convey technical information and address any concerns related to electrical drawings.</li> <li><strong>Project Coordination</strong>: Assist in project coordination by providing timely updates on the status of electrical drawings and collaborating with other team members to meet project deadlines.</li> <li><strong>Continuous Improvement:</strong>&nbsp;Staying updated on industry trends, advancements, and emerging technologies in electrical design. Seeking opportunities to improve design processes, efficiency, and effectiveness.</li> </ul><br><br>Role Accountability <br><ul> <li><strong>System Layout and Configuration:</strong>&nbsp;Electrical engineer are accountable for laying out electrical systems, including power distribution, lighting, communication, and control systems.</li> <li><strong>Creating Technical Drawings:</strong>&nbsp;Create accurate and detailed drawings, including schematics, circuit diagrams, wiring diagrams using software such as AutoCAD, REVIT, Etap and other specialized design tools.</li> <li><strong>Component Selection and Specification:</strong>&nbsp;Research, evaluate, and select electrical components, equipment, and materials based on project requirements, performance criteria, and cost considerations.</li> <li><strong>Documentation and Reporting:&nbsp;</strong>Prepare technical reports, design documentation, and engineering drawings to communicate design specifications, procedures, and findings.</li> <li><strong>Regulatory Compliance:</strong>&nbsp;Ensure that electrical designs comply with relevant industry standards, building codes, safety regulations, and certification requirements.</li> <li><strong>Quality Assurance and Review</strong>: Electrical engineer are accountable for conducting quality assurance reviews of their designs to ensure accuracy, completeness, and compliance with project requirements.</li> <li><strong>Client Communication and Support</strong>: Provide technical expertise and support to clients, contractors, and internal teams throughout the design, implementation, and maintenance phases of projects.</li> <li><strong>Drafting Electrical Plans:</strong>&nbsp;Creating detailed electrical drawings, plans, and diagrams using computer-aided design (CAD and REVIT) software. This involves accurately representing the layout of electrical systems, includingwiring, circuits, outlets, switches, and other components.</li> <li><strong>Interpreting Specifications:</strong>&nbsp;Reviewing technical specifications,and design documents to understand project requirements and ensure compliance with relevant codes and standards</li> <li><strong>Ensuring Accuracy:</strong>&nbsp;Checking drawings for accuracy and completeness, including dimensions, labels, and symbols. Identifying and correcting errors or discrepancies in drawings to maintain quality standards.</li> <li><strong>Updating Drawings:</strong>&nbsp;Revising and updating electrical drawings as needed to reflect changes in design, specifications.</li> <li><strong>Maintaining Documentation:&nbsp;</strong>Organizing and maintaining a library of electrical drawings, documents, and related project files.</li> <li><strong>Adhering to Safety Standards:</strong>&nbsp;Ensuring that electrical drawings comply with relevant safety regulations and building codes.</li> </ul><br><br>Academic Qualification <br>Bachelor Degree in Electrical Engineering<br><br><br>Work Experience <br>5 to 10 Years<br><br><br>Technical / Functional Competencies <br>Design Tools<br>Reporting<br>Troubleshooting<br>Compliance<br>Communication<br><br><br><br> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> No experience required </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

<h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">About the Role</h3> <p style="margin:0 0 12px; ************;">Parsons Corporation is seeking a <strong style="font-weight:700;">Senior Handover &amp; Commissioning Engineer</strong> to join their team in Riyadh, Saudi Arabia. This full-time position supports the Program Management Office (PMO) by overseeing Mechanical, Electrical, and Plumbing (MEP) systems associated with roads, tunnels, and related infrastructure projects.</p> <h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">Role Overview</h3> <p style="margin:0 0 12px; ************;">The Senior Handover &amp; Commissioning Engineer leads and manages the end-to-end handover and commissioning process for large-scale infrastructure projects within a PMO environment. This role requires deep expertise in Testing &amp; Commissioning (T&amp;C), construction close-out, and asset handover across multi-disciplinary infrastructure systems, including roads, structures, utilities, landscape, power, and Intelligent Transport Systems (ITS). The focus is on governance, coordination, and assurance of handover readiness, ensuring all contractual, technical, and stakeholder requirements are met prior to Substantial Completion and Final Handover. The position involves strong interface management with PMCMs, Contractors, and receiving entities, and may include site visits across Riyadh.</p> <h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">Key Responsibilities</h3> <ul style="margin:0 0 12px; padding-inline-start:24px; list-style-type:disc; list-style-position:outside;"> <li style="margin:0 0 6px;">Lead the development and implementation of project-wide handover and commissioning strategies, procedures, and checklists aligned with PMO standards.</li> <li style="margin:0 0 6px;">Oversee and validate Testing &amp; Commissioning (T&amp;C) activities, ensuring system functionality, integration, and compliance with specifications.</li> <li style="margin:0 0 6px;">Review and ensure completeness of all handover deliverables, including As-Built Drawings, O&amp;M Manuals and Training Documentation, Warranties, Guarantees, Spare Parts, Testing &amp; Commissioning Reports, Asset Registers, and GIS submissions (where applicable).</li> <li style="margin:0 0 6px;">Manage and track Substantial Completion requirements, including approval-gated items such as Construction Acceptance Tests, Closed Snag Lists, Operation &amp; Maintenance Manuals, Road Safety Audits, and operational readiness evidence.</li> <li style="margin:0 0 6px;">Coordinate with stakeholders and authorities (*, municipality, utility providers, traffic control entities) to secure handover approvals, permits, and clearances.</li> <li style="margin:0 0 6px;">Ensure proper interface management between systems (*, power supply to ITS, drainage integration, traffic signal operations).</li> <li style="margin:0 0 6px;">Review contractor submissions including method statements, T&amp;C plans, ITPs, and close-out documentation.</li> <li style="margin:0 0 6px;">Monitor contractor and PMCM performance on handover readiness, highlighting risks and enforcing corrective actions.</li> <li style="margin:0 0 6px;">Support the definition and implementation of Defect Liability Period (DLP) strategies and handover conditions.</li> <li style="margin:0 0 6px;">Advise PMO leadership on handover risks, partial completions, and operational readiness.</li> <li style="margin:0 0 6px;">Provide technical leadership and guidance on commissioning and handover matters across all disciplines.</li> </ul> <h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">Qualifications and Experience</h3> <ul style="margin:0 0 12px; padding-inline-start:24px; list-style-type:disc; list-style-position:outside;"> <li style="margin:0 0 6px;">A minimum of 10 years of relevant experience in Testing &amp; Commissioning, construction close-out, and asset handover for large-scale infrastructure projects.</li> <li style="margin:0 0 6px;">Demonstrated expertise in multi-disciplinary infrastructure systems.</li> </ul> <h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">Work Environment</h3> <p style="margin:0 0 12px; ************;">This is a full-time position based in Riyadh, Riyadh, Saudi Arabia, involving collaboration within a Program Management Office (PMO) environment and potential site visits across the city.</p> <h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">Application Information</h3> <p style="margin:0 0 12px; ************;">Parsons Corporation values individuals who thrive in a collaborative environment and are committed to achieving their full potential.</p>