Mechanical Engineering Jobs in Saudi

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>The Completion &amp; Well Intervention Engineer is responsible for well engineering and operations support for one or more completion/workover rigs/rigless completion operation including preparing Completion and Workover Programs and procedures; and AFE's. The Completion &amp; Well Intervention Engineer supervises and mentors FET's and junior engineers. This person attends critical operations at the wellsite as necessary in a technical advisory capacity</p><br><ul><li>Work with Subsurface and Production to ensure completion and workover plans meet requirements and objectives. * Reviews Completion Basis of Design and performs detailed design checks.</li><li>Review all completion hardware components for compatibility with clearances, setting pressure/turns/weight, and couplings.</li><li>Review regulatory requirements to determine downhole and surface safety equipment requirements and confirm compliance of final equipment configuration.</li><li>Review current well status and well integrity.</li><li>Prepare final well status post completion / workover.</li><li>Prepare completion / workover operations flowchart and contingencies.</li><li>Confirm final hardware design and compatibility (stimulation, treating, production) with TDAS.</li><li>Write program for making up sub-assemblies, drifting, gauging and pressure testing prior to them being RIH.</li><li>Determine required fluid density and composition for formation compatibility to minimize formation damage and manage fluid losses.</li><li>Review and determine compatibility of all slickline and wireline operations required.</li><li>Review fishing tool requirements and alternatives (workover).</li><li>Write program for setting cement plugs e.g. squeezing perforations, and any remedial cementing (workover).</li><li>Review and insure compliance with high pressure treating standards.</li><li>Ensure compliance with IPM Standards for Simultaneous Activities.</li><li>Ensure IPM Barrier Standards is complied with when removing the BOP and installing the Christmas Tree.</li><li>Prepares Completion / Workover Programs and follows the execution of programs technically.</li><li>Prepares Completion / Workover procedures.</li><li>Prepares Completion / Workover time estimates and AFE's.</li><li>Review the program with all parties involved (drilling contractor, completion, wellhead, slickline, etc.).</li><li>Participates in selection and evaluation of service companies, suppliers and equipment.</li><li>Ensures proper communication with relevant parties (client, Product Lines, third parties, etc.).</li><li>Participates in cost control of programs vs AFE by analyzing solutions."</li><li>Reviews new technology for possible application to project.</li><li>Uses InTouch for best practices, lessons learned and technical alerts.</li><li>Participates in HARC's.</li><li>Prepares requests for exemptions to IPM Standards in QUEST.</li><li>Enters SQ RIR's resulting from Completion / Workover operations in QUEST.</li><li>Prepares Management of Change to Completion / Workover programs.</li><li>Forecasts and plans medium and long term needs to meet program requirements.</li><li>Anticipates operational changes and needs and revises plan accordingly.</li><li>Participates in Daily Operations Meetings.</li><li>QA/QC of data in Daily Report.</li><li>Monitors daily progress against plan.</li><li>Monitors actual costs Vs AFE.</li><li>Record and monitor operational NPT trends.</li><li>Evaluates results Vs goals and performance of service companies.</li><li>Initiates engineering corrective action to ensure a process of continuous improvement.</li><li>Performs engineering studies to solve recurring problems (completion hardware problems, etc.).</li></ul>Education<ul><li>Bachelor's degree in <strong>Petroleum Engineering, Mechanical Engineering, Chemical Engineering</strong>, or a related Engineering discipline.</li><li>Valid <strong>IWCF or IADC Well Control Certification</strong> (preferred).</li><li>Additional certifications in drilling engineering, well integrity, project management, or risk management are an advantage.</li></ul>Experience<ul><li><strong>5-8 years of experience</strong> in drilling, completion, workover, and/or well intervention engineering within the oil &amp; gas industry.</li><li>Experience in well planning, engineering design, and operational support.</li><li>Proven experience preparing and reviewing:<ul><li>Well Proposals</li><li>Basis of Design (BoD)</li><li>Drilling Programs</li><li>Completion Programs</li><li>Workover Programs</li><li>Cost Estimates and Budgets</li><li>End of Well Reports</li></ul></li><li>Experience supporting rig operations and providing real-time engineering support during well execution.</li><li>Exposure to risk assessments, incident investigations, and performance improvement initiatives.</li><li>Experience coordinating with service companies, contractors, and multidisciplinary operational teams.</li></ul>Technical Competencies<ul><li>Strong knowledge of:<ul><li>Well Construction and Intervention (WCI) processes.</li><li>Drilling, completion, and workover operations.</li><li>Well control principles and well integrity management.</li><li>Casing design, cementing, directional drilling, and completion equipment.</li><li>Risk assessment methodologies (HARC, HAZID, PRA, JSA).</li><li>Project planning, scheduling, and cost control.</li><li>Industry standards, regulations, and best practices.</li></ul></li><li>Ability to:<ul><li>Develop optimized well designs and operational programs.</li><li>Monitor operational progress against scope, schedule, cost, and quality targets.</li><li>Analyze operational performance and recommend improvements.</li><li>Conduct engineering studies to solve well-related problems.</li><li>Evaluate new technologies and implement operational enhancements.</li></ul></li></ul>Leadership &amp; Behavioral Competencies<ul><li>Strong analytical and problem-solving skills.</li><li>Effective communication and stakeholder management abilities.</li><li>Ability to work in multidisciplinary teams and collaborate with customers, contractors, and service providers.</li><li>Strong organizational, planning, and reporting skills.</li><li>Ability to perform under pressure and support critical operational decision-making.</li><li>Continuous improvement mindset with strong attention to detail.</li></ul>HSE &amp; Quality Requirements<ul><li>Working knowledge of:<ul><li>HSE Management Systems.</li><li>Risk Management and Management of Change (MOC).</li><li>Well Control and Emergency Response procedures.</li><li>Incident Investigation and Root Cause Analysis.</li><li>Quality Assurance and Operational Integrity processes.</li></ul></li><li>Experience participating in:<ul><li>Risk assessments and operational reviews.</li><li>Incident investigations and corrective action implementation.</li><li>Safety meetings and compliance activities.</li></ul></li></ul>Preferred Industry Background<ul><li>Experience with major oilfield service companies (<strong>SLB, Halliburton, Baker Hughes, Weatherford</strong>) and/or E&amp;P operators.</li><li>Experience supporting onshore and/or offshore drilling operations.</li><li>Exposure to horizontal, multilateral, HPHT, or complex well environments is preferred.</li></ul><br><p>SLB is an equal employment opportunity employer. Qualified applicants are considered without regard to race, color, religion, sex, national origin, age, disability, or other characteristics protected by law.</p><br> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> No experience required </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><span>Airbus is committed to providing reasonable accommodations as an Equal Opportunity Employer to applicants with disabilities. If you require assistance or an accommodation to complete your application, please contact us at USCareers@airbus.com</span></p><br><br><br><ul><li>Notice: Know Your Rights: Workplace Discrimination is Illegal</li><li>Notice: Pay Transparency Nondiscrimination (English)</li><li>Aviso: Transparencia en el Pago No Discriminación&nbsp;(Spanish)</li></ul><br><br><p><span><b><b>Job Description:</b></b></span></p><br><br><p><span>Airbus Commercial Aircraft is looking for an <b>Aircraft Systems Engineer</b> to join our Engineering department based in Mobile, AL.</span></p><br><br><br><p><span>this role is to deliver timely, high-quality, and structurally sound engineering solutions executing and performing live on-aircraft troubleshooting, meticulously assessing test data, and delivering timely, high-quality, and structurally sound engineering solutions to keep production moving without compromising aircraft safety or continued airworthiness. The scope of accountability demands covering full aircraft systems including engines and APU, ensuring all corrective actions satisfy strict internal guidelines, Service Level Agreements (SLAs), customer expectations, and global regulatory frameworks.</span></p><br><br><br><br><p><b>Meet the team:</b></p><br><br><p><span>Our Engineers at the Airbus U.S. Manufacturing facility take our aircraft from concept to customer delivery – working with production teams on every aspect of assembly from managing technical information, quality control, maintenance tasks and health &amp; safety – along flowlines and flightlines. Join our team and watch our aircraft come to life.</span></p><br><br><br><p><b>Your working environment:</b></p><br><br><p><span>Nearby on ‘Airbus Way’ you will find the Airbus U.S. Manufacturing Facility for commercial aircraft. Opened at the Mobile Aeroplex at Brookley in 2015, the facility produces A320 Family aircraft and added a second product line for the A220 in 2019. The facility, which strengthens the U.S. aerospace industry, is part of Airbus’ strategy to enhance its global competitiveness by meeting the growing needs of its customers in the United States and beyond.</span></p><br><br><br><p><b>How we care for you:</b></p><br><br><ul><li><p><span>Financial Rewards: Competitive base salary, incentive compensation which may include profit sharing schemes, retirement savings plan and the ability to participate in an Employee Stock Ownership Plan (“ESOP”)</span></p><br><br></li><li><p><span>Work/Life Balance: Paid time off including personal time, holidays and a generous paid parental leave program.</span></p><br><br></li><li><p><span>Health &amp; Welfare: Comprehensive insurance coverage including medical (traditional and high-deductible health plans), prescription, dental, vision, life, disability, Employee Assistance Plan (“EAP”) and other supplemental benefit coverages.</span></p><br><br></li><li><p><span>Individual Development: Upskilling and development opportunities through our global Leadership University, including unlimited access to 10,000+ e-learning courses focusing on ways to develop your employability, certifications, career path as well as the opportunity to participate in accelerated development programmes and both national and international mobility.</span></p><br><br></li></ul><br><p><span>At Airbus, we support you to work, connect and collaborate more easily and accessibly. Wherever possible, we support flexible working arrangements to stimulate innovative thinking.</span></p><br><br><br><p><b>Your challenges:</b></p><br><br><ul><li><p><span>Live On-Aircraft Troubleshooting: Perform immediate, hands-on on-aircraft troubleshooting and diagnostic assessments to isolate and resolve systems non-functioning or malfunctioning issues during ground and flight line operations.</span></p><br><br></li><li><p><span>Test Data Assessment: Analyze, interpret, and evaluate specialized aircraft system test data generated during ground tests and production flights to diagnose deviations and assess effects on aircraft safety.</span></p><br><br></li><li><p><span>Full Aircraft Systems Coverage: Accountable for design engineering activities across the entire aircraft systems perimeter, including Aircraft Control, Avionics, hydro-Mechanical systems, Cabin Systems, and APU/Power Plant systems.</span></p><br><br></li><li><p><span>Airworthiness Accountability: Guarantee total compliance with Aircraft Safety and continuous Airworthiness standards for all approved rework and troubleshooting strategies.</span></p><br><br></li><li><p><span>Flight Line Debrief Representation: Attend and actively represent MAP Engineering at flight line debriefs alongside Flight Test Engineers and production crews to analyze recorded system parameters and reported telemetry anomalies.</span></p><br><br></li></ul><br><p><b>Your boarding pass:</b></p><br><br><ul><li><p><span>B.S. or M.S. degree in aerospace, mechanical, electrical or systems engineering.</span></p><br><br></li><li><p><span>~1 year of relevant experience in aerospace engineering.&nbsp;</span></p><br><br></li></ul><ul><li><p><span>Demonstrated effectiveness in solving engineering problems.</span></p><br><br></li><li><p><span>Ability to function on the basis of self-motivation and self-direction.</span></p><br><br></li><li><p><span>Willing to travel up to 15% of the time overseas and domestically within the Airbus international network, supplier and customer sites.</span></p><br><br></li></ul><br><p>Physical Requirements:&nbsp;</p><br><br><ul><li><p><span>Onsite or remote: Onsite 100%&nbsp;</span></p><br><br></li><li><p><span>Must hold an EASA, TCCA, or FAA Class 2 Medical and be able to perform duties as aircrew on a daily basis.</span></p><br><br></li><li><p><span>Vision: able to see and read computer screens and other electronic equipment with screens, able to read documents, reports and engineering drawings.</span></p><br><br></li><li><p><span>Hearing: able to participate in conversations in person and via teleconference or phone and to hear sounds on the production floor including safety warnings or alarms.&nbsp;</span></p><br><br></li><li><p><span>Speaking: able to speak in conversations and meetings, deliver information and participate in communications.&nbsp;</span></p><br><br></li><li><p><span>Equipment Operation (personal computer, telephone, copies, fax machine, and related office equipment and using electronic identification card to enter building floors and internal doors): able to operate most office and personal electronic equipment and some tools including production tools such as hydraulic lifts.</span></p><br><br></li><li><p><span>Carrying: able to carry documents, tools, drawings, electronic equipment up to 30lbs/14kgs.&nbsp;</span></p><br><br></li><li><p><span>Lifting: able to lift documents, tools, drawings, electronic equipment up to 30lbs/14kgs.</span></p><br><br></li><li><p><span>Pushing / Pulling: able to push and pull small office furniture and some equipment and tools.</span></p><br><br></li><li><p><span>Sitting: able to sit for long periods of time in meetings, working on the computer.&nbsp;</span></p><br><br></li><li><p><span>Squatting / Kneeling: able to squat or kneel to retrieve or replace items stored on low shelving.</span></p><br><br></li><li><p><span>Standing: able to stand for discussions in offices or on the production floor.&nbsp;</span></p><br><br></li><li><p><span>Travel: able to travel independently and at short notice.</span></p><br><br></li><li><p><span>Walking (include routine walking such as to a shared printer to retrieve documents): able to walk through office and production areas including uneven surfaces</span></p><br><br></li></ul><br><p><b><span>Take your career to a new level and apply</span><u>online</u><span> now!</span></b></p><br><br><br><br><p>This job requires an awareness of any potential compliance risks and a commitment to act with integrity, as the foundation for the Company’s success, reputation and sustainable growth.</p><br><br><br><p><span><b><b><b><b>Company:</b></b></b></b></span></p><br><br>Airbus Americas, Inc.<br><p><b>Employment Type:</b></p><br><br>US - Direct Hire<br><p><b>Experience Level:</b></p><br><br>Professional<br><p><b>Remote Type:</b></p><br><br>On-site<br><p><b>Job Family:</b></p><br><br>Qualification &amp; Operability &lt;JF-EN-EJ&gt;<p>------</p><br><br><p>------</p><br><br>Airbus provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetics, pregnancy, marital status, veteran status or other legally protected status. In addition to federal law requirements, Airbus complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, demotion, termination, layoff, recall, transfer, leaves of absence, compensation, benefits and training. Airbus expressly prohibits any form of workplace harassment based on race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetics, pregnancy, marital status, veteran status or other legally protected status. As a matter of policy, Airbus does not sponsor visas for US positions unless specified. Only applicants with current work authorization will be considered. Airbus does not offer tenured or guaranteed employment. Employment with Airbus is at will, meaning either the company or the employee can terminate the employment relationship at any time, with or without cause, with or without notice. Airbus reserves the right to revise or change job duties and responsibilities as the need arises. This position description does not constitute a written or implied contract of employment.<br><p>By submitting your CV or application you are consenting to Airbus using and storing information about you for monitoring purposes relating to your application or future employment. This information will only be used by Airbus.<br>Airbus is committed to achieving workforce diversity and creating an inclusive working environment. We welcome all applications irrespective of social and cultural background, age, gender, disability, sexual orientation or religious belief.</p><br><br><p><span>Airbus is, and always has been, committed to equal opportunities for all. As such, we will never ask for any type of monetary exchange in the frame of a recruitment process. Any impersonation of Airbus to do so should be reported to&nbsp;</span><span>emsom@airbus.com.</span></p><br><br><br> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> No experience required </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

<b>Join Our Team as a Mechanical Technician!</b><br>At <b>International Water Distribution Co. (Tawzea)</b>, we are seeking a skilled Mechanical Technician to maintain and repair all types of pumps including centrifugal pumps, gear pumps, and metering pumps. This is an exciting opportunity to be part of a company that specializes in the management of industrial cities and the operation of water and wastewater facilities. <br><br><b>Key Responsibilities:</b><ul><li>Perform preventive, corrective, and emergency maintenance on installed pumps and valves in accordance with O&amp;M manual instructions.</li><li>Handle pipeline burst treatment and report failure points that require pump maintenance.</li><li>Conduct mechanical part inspections and electrical testing of motors.</li><li>Carry out mechanical seal replacement, coupling, alignment, and gearbox assembly and maintenance.</li><li>Monitor bearings and lubrication points, and replace shaft seals if needed.</li></ul><br><b>Requirements:</b><ul><li>A minimum of 2 years of relevant work experience.</li><li>A technical degree in Mechanics Technology.</li></ul><br>If you are ready to bring your expertise to our team, apply now!

<b>Join Our Team as a Mechanical Technician!</b><br>At <b>International Water Distribution Co. (Tawzea)</b>, we are seeking a skilled Mechanical Technician to maintain and repair all types of pumps including centrifugal pumps, gear pumps, and metering pumps. This is an exciting opportunity to be part of a company that specializes in the management of industrial cities and the operation of water and wastewater facilities. <br><br><b>Key Responsibilities:</b><ul><li>Perform preventive, corrective, and emergency maintenance on installed pumps and valves in accordance with O&amp;M manual instructions.</li><li>Handle pipeline burst treatment and report failure points that require pump maintenance.</li><li>Conduct mechanical part inspections and electrical testing of motors.</li><li>Carry out mechanical seal replacement, coupling, alignment, and gearbox assembly and maintenance.</li><li>Monitor bearings and lubrication points, and replace shaft seals if needed.</li></ul><br><b>Requirements:</b><ul><li>A minimum of 2 years of relevant work experience.</li><li>A technical degree in Mechanics Technology.</li></ul><br>If you are ready to bring your expertise to our team, apply now!

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Company Description<br><p>A premier Saudi Arabian entertainment and hospitality company owned by the PIF. Was founded in 1997 as the nation’s first athlete representation agency,&nbsp; has now evolved into a global developer of iconic destinations and spectacular live experiences.</p><br><br>Job Description<br><p>The Detailing Engineer sits within SELA's fabrication and production workshop, converting design concepts, 3D<br> renders, and structural/architectural drawings into fully dimensioned, buildable shop drawings for event sets,<br> exhibition stands, scenic elements, staging, and structures. He/she is the technical bridge between the Design<br> department and the Workshop floor, ensuring every fabricated piece is engineered for accuracy, material efficiency, structural integrity, and safe rigging/installation before a single cut is made. This is a detail-critical, deadline-driven role requiring strong CAD/3D modeling skills combined with practical knowledge of fabrication methods used in live events.<br> <br> <strong>Key Responsibilities</strong><br> <br> 1. <strong>Detailing &amp; Technical Drawing</strong><br> • Shop Drawing Production: Convert approved concept designs, 3D renders, and architectural drawings into detailed 2D fabrication drawings and cutting lists for carpentry, metalwork, and scenic elements.<br> • 3D Modeling: Build accurate 3D models (AutoCAD, SketchUp, Tekla, Solidworks, or equivalent) of sets, stands, and structures to validate dimensions, tolerances, and assembly sequence prior to production.<br> • Material &amp; BOQ Take-off: Generate precise bills of quantities and cut lists for timber, steel, aluminum, MDF, acrylic, and other fabrication materials to minimize wastage and support accurate procurement.<br> • Structural Detailing: Detail load-bearing elements, connections, weld points, and fixings for platforms, trusses, staging, and rigging points, ensuring designs are structurally sound and code-compliant.<br> • Clash Detection: Cross-check drawings against MEP, AV, lighting, and rigging layouts to identify and resolve clashes before fabrication begins.<br> <br> 2. <strong>Production Support &amp; Coordination</strong><br> • Workshop Liaison: Work directly with the Installation Team Leader, carpenters, welders, and fabricators to clarify drawings, resolve on-the-shop-floor queries, and update details based on practical build constraints.<br> • Design Liaison: Coordinate with Designers and Project Managers to confirm design intent, obtain approvals on technical revisions, and communicate any design changes required for buildability.<br> • As-Built Updates: Revise and reissue drawings to reflect on-site or in-workshop modifications, maintaining an accurate as-built record for each project.<br> • CNC &amp; Machine Files: Prepare CNC cutting/routing files and machine-ready outputs where applicable, to streamline pre-fabrication in the workshop.<br> <br> 3. <strong>Quality &amp; Compliance</strong><br> • Design Validation: Verify that all detailed drawings meet client specifications, structural safety margins, and applicable Saudi building and event safety codes.<br> • Documentation Control: Maintain organized, version-controlled drawing registers and issue drawings through proper revision and approval workflows.<br> • Continuous Improvement: Identify recurring detailing issues or fabrication inefficiencies and recommend standardized details, templates, or jigs to improve workshop throughput.</p><br><br>Qualifications<br><p><strong>Qualifications &amp; Skills</strong><br> • Education: Bachelor's degree or diploma in Mechanical/Civil/Structural Engineering, Architecture, Industrial Design, or a related technical field.<br> • Experience: 3+ years of detailing/drafting experience in event production, exhibition stand fabrication, scenic/theatrical construction, steel detailing, or a similar workshop-based manufacturing environment.<br> • Software Proficiency: Advanced proficiency in AutoCAD and SketchUp; working knowledge of Tekla Structures, Solidworks, Rhino, or 3ds Max is an advantage.<br> • Technical Knowledge: Strong understanding of carpentry, metalwork, rigging, and structural connections, along with material properties and fabrication tolerances.<br> • Standards Awareness: Familiarity with structural safety margins, load calculations, and relevant Saudi/international codes applicable to temporary event structures.<br> • Soft Skills: High attention to detail, strong spatial visualization, ability to work under pressure against tight<br> production deadlines, and clear communication with both design and shop-floor teams.</p><br><br>Additional Information<br><p><strong>Typical Working Conditions</strong><br> • Environment: Must be able to work in a workshop environment, which may include loud noise, dust, and heat, with some on-site installation work.<br> • Hours: May require working evenings, weekends, and holidays to meet event deadlines.<br> • Physical Requirements: Ability to work in a fast-paced environment and handle tight deadlines and to work on site, which may include lifting, standing for long periods, and working in varied conditions.</p><br><br><br> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> No experience required </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Job Requisition ID: </b>177934&nbsp;</p><p>Established in the 1930s as a trading business, Al-Futtaim Group today is one of the most diversified and progressive, privately held regional businesses headquartered in Dubai, United Arab Emirates. Structured into five operating divisions; automotive, financial services, real estate, retail and healthcare; employing more than 35,000 employees across more than 20 countries in the Middle East, Asia and Africa, Al-Futtaim Group partners with over 200 of the world's most admired and innovative brands. Al-Futtaim Group’s entrepreneurship and relentless customer focus enables the organization to continue to grow and expand; responding to the changing needs of our customers within the societies in which we operate.&nbsp;</p><p>By upholding our values of respect, excellence, collaboration and integrity; Al-Futtaim Group continues to enrich the lives and aspirations of our customers each and every day</p><p>&nbsp;</p><p>Position Summary</p><p>The Technical Support Engineer serves as the dealership’s highest technical authority for complex diagnostic cases, warranty escalations, and OEM technical coordination.</p><p>The role supports Workshop Supervisors and Technicians in resolving advanced and repeat faults that require deeper analysis, while ensuring all diagnostic and repair activities meet OEM standards. Acting as the primary technical interface with the manufacturer, the Technical Support Engineer protects the dealership’s brand reputation through accurate reporting, effective recall execution, and strong technical governance.</p><p>In addition, the role plays a key part in developing workshop capability by coaching technicians, driving technical excellence, and supporting continuous improvement initiatives across aftersales operations.</p><p>Key Responsibilities</p><p>Escalated Diagnostics &amp; Case Resolution</p><p>• Lead diagnosis and resolution of complex, repeat, or high-priority technical cases escalated from the workshop</p><p>• Apply structured diagnostic methodologies using advanced tools, OEM systems, and technical documentation</p><p>• Identify root causes of faults and define corrective actions that eliminate repeat failures and comebacks</p><p>• Document detailed case reports including diagnosis steps, root cause analysis, corrective actions, and lessons learned</p><p>OEM Liaison &amp; Field Actions</p><p>• Act as the primary technical contact between the dealership and OEM / Principal technical support teams</p><p>• Manage recall campaigns, Special Service Campaigns (SSCs), and field actions from identification to completion</p><p>• Prepare and submit Technical Reports, Product Quality Reports (PQRs), and warranty escalation cases in line with OEM requirements</p><p>• Ensure timely communication and compliance with OEM technical updates, service bulletins, and field actions</p><p>Technician Coaching &amp; Capability Building</p><p>• Support and coach Technicians and Electrical Technicians on complex repairs, diagnostic strategies, and new technologies</p><p>• Conduct technical training sessions, workshops, and toolbox talks to enhance workshop capability</p><p>• Collaborate with Technical Trainers to identify skill gaps and implement structured development plans</p><p>• Build and maintain a knowledge base of common faults, diagnostic approaches, and OEM technical updates</p><p>Quality, Warranty &amp; Continuous Improvement</p><p>• Ensure all technical work meets OEM diagnostic and repair standards to support warranty claim approval and audit readiness</p><p>• Analyze workshop performance data including comeback rates, First Time Right (FTR), and warranty claims to identify improvement opportunities</p><p>• Lead initiatives to reduce repeat repairs, improve diagnostic accuracy, and enhance workshop efficiency</p><p>• Support continuous improvement programs aligned with dealership operational and quality objectives</p><p><br></p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p>Educational Requirements</p><p>• Bachelor’s Degree in Automotive Engineering, Mechanical Engineering, Electrical Engineering, or a related discipline</p><p>• OEM Master Technician certification or equivalent advanced technical qualification is highly preferred</p><p>Experience Requirements</p><p>• Minimum 7–10 years of progressive experience within a franchised automotive dealership workshop</p><p>• Proven track record of resolving complex technical issues and supporting advanced diagnostics</p><p>• Experience working directly with OEM technical teams, warranty departments, or technical support functions</p><p>• Strong exposure to EV, hybrid systems, ADAS, and modern vehicle electronics is essential</p><p>Technical Skills</p><p>• Expert-level proficiency in OEM diagnostic platforms, scan tools, and oscilloscope-based diagnostic equipment</p><p>• Deep understanding of vehicle systems including powertrain, chassis, body electronics, and high-voltage (HV) systems</p><p>• Ability to perform detailed root cause analysis and produce structured technical reports</p><p>• Strong working knowledge of DMS platforms, warranty systems, OEM portals, and technical reference tools</p><p>• Proficiency in Microsoft Excel and PowerPoint for reporting, analysis, and presentation of technical findings</p></div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> About the job Civil Engineer <p><strong>About the Project</strong></p><br> <p>A landmark high-rise tower development located in the Riyadh Region, Saudi Arabia. The position is site-based. All engineering disciplines are required to be proficient in BIM (Building Information Modelling), and prior experience on high-rise towers is required across technical and engineering positions. This tower experience does not need to be Riyadh-specific and may have been gained anywhere within the Kingdom of Saudi Arabia.</p><br> <p><strong>Key Roles &amp; Responsibilities</strong></p><br> <ul><li>Execute assigned civil and structural work packages on site under the direction of the Senior Civil Engineers.</li><li>Support and contribute to architectural works execution as required.</li><li>Implement approved shop drawings, method statements, and specifications for assigned works.</li><li>Conduct and record site work inspections for assigned work fronts prior to sign-off.</li><li>Supervise direct labor crews and/or subcontractor gangs on assigned works.</li><li>Assist in the preparation of quantity take-offs and measurement of executed works.</li><li>Maintain daily site records, progress reports, and as-built markups for assigned works.</li><li>Ensure adherence to health and safety requirements on assigned civil work fronts.</li></ul> <p>Minimum Experience: Minimum 7 years of experience in towers&nbsp;<br><strong>#CivilEngineer #SiteEngineer #CivilConstruction #StructuralEngineering #HighRiseConstruction #TowerProjects #BuildingInformationModeling #BIM #ConstructionProjects #SiteExecution #StructuralWorks #ArchitecturalWorks #ShopDrawings #MethodStatements #SiteInspections #QuantityTakeoff #AsBuiltDrawings #ConstructionManagement #SubcontractorManagement #HealthAndSafety #SaudiArabiaJobs #RiyadhJobs #EngineeringJobs #CivilEngineeringJobs #ConstructionCareers</strong> </p><br> <br> <br> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> No experience required </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

Company Description Building Guide is a Civil Defense-approved engineering and safety consultancy firm specializing in fire safety solutions, safety plan approvals, compliance reports, and certification services. The company supports businesses and facilities in meeting regulatory requirements and obtaining operational licenses efficiently. By focusing on safety, compliance, and sustainability, Building Guide helps clients create secure environments for occupants and operations. The firm offers multidisciplinary engineering expertise and collaborates closely with regulatory authorities to streamline approval processes. Team members contribute to projects that directly impact public safety and regulatory adherence across Saudi Arabia.<br>Role Description The Architectural Engineer role is a full-time, on-site position based in Saudi Arabia. The Architectural Engineer will develop and review architectural designs and plans that align with fire safety regulations, Civil Defense requirements, and overall building codes. Daily responsibilities include coordinating with civil and construction engineers, preparing technical drawings, supporting safety plan approvals, and contributing to compliance documentation and reports. The role involves conducting site visits, assessing existing structures for safety and regulatory conformity, and recommending design modifications or improvements. The Architectural Engineer will collaborate with project managers, consultants, and client representatives to ensure projects are delivered on time, within scope, and in full compliance with local standards.<br>Qualifications<br> Strong foundation in Architecture with experience in building design, codes, and safety-focused layouts. Relevant experience in Civil Engineering and Construction, including coordination with multidisciplinary engineering teams. Proven Project Management skills, with the ability to plan, prioritize, and deliver multiple projects to regulatory deadlines. Demonstrated Teamwork and collaboration skills, with the ability to work effectively with internal teams, clients, and authorities. Bachelor’s degree in Architecture, Architectural Engineering, Civil Engineering, or a related field. Knowledge of fire safety standards, local Saudi building regulations, and Civil Defense requirements is highly beneficial. Proficiency in relevant design and drafting software (e.g., Auto CAD, Revit or similar) and ability to produce accurate technical drawings. Strong analytical, problem-solving, and communication skills, with attention to detail and commitment to safety and compliance. Prior experience in an engineering consultancy or regulatory environment is an advantage.

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Responsibilities We are currently looking for a Senior Engineer in our Riyadh office. This individual will be responsible for: Performing structural computations in the design and analysis of concrete, steel or other miscellaneous structures Creating analysis models and interpreting results for 2D and 3D structural frames Assisting with construction administrative tasks, including site visits and shop drawing review Understanding load paths for gravity and lateral loads and calculating applicable loads based on appropriate building codes Assisting with design drawings, quantities, cost estimates, specifications, reports and other project deliverables while working with the structures team Preparing technical studies and reports In this position, the individual will be required to work closely with a team of Structural Engineers and/or Project Managers. A willingness to work in a team environment, following the standards we have in place is a must. A can-do , client-focused attitude is crucial.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Master s in Civil Engineering with emphasis in Structural Engineering</li><li>6 - 11 years of experience</li><li>Experience with Revit, Rhino or Grasshopper is a plus</li><li>Excellent written and verbal communication</li><li>Strong organizational skills</li></ul><p></p></section>

The Senior Signalling Engineer shall provide specialist technical leadership and hands-on engineering support for the design review, installation, testing, integration, commissioning and handover of the railway signalling systems for the Project. The role shall ensure that signalling works are safe, coordinated, constructible and compliant with the Employer’s Requirements, SAR standards, approved designs, applicable Transport General Authority requirements, relevant EN/UIC/CENELEC standards, the project programmer and quality requirements. The position will support the S&T Manager in integrating the new signaling system with the existing operational railway infrastructure, including the existing interlocking and VICOS interfaces, while coordinating closely with track, civil, electrical, telecommunications, systems assurance, operations and specialist vendors.<br>Key Responsibilities Provide senior technical support and day-to-day engineering leadership for all signaling activities from design through final handover. Review signaling designs, drawings, specifications, calculations, control tables, route tables, equipment schedules, cable schedules and interface documents for completeness, compliance and constructability. Coordinate signaling requirements with track geometry, turnouts, level crossings, civil works, structures, utilities, power supplies, telecommunications and operational railway constraints. Support the S&T Manager in planning resources, priorities, work fronts, technical submissions, long-lead items and signaling deliverables. Identify technical risks, design conflicts, interface gaps and site constraints; recommend and follow up mitigation measures. Provide technical guidance to signaling engineers, supervisors, technicians, subcontractors and system suppliers. Participate in coordination meetings with SAR, the Engineer, designers, vendors, Operations and Maintenance teams, and third-party contractors.

Senior Civil & Structural Engineers Summary:Senior Civil & Structural Engineers provide civil and structural supervision for infrastructure and roadworks, reviewing contractor submittals and verifying compliance on site.<br><br>Minimum Qualification: Bachelor's degree in Civil Engineering, Structural and Roads Professional Membership: -Min. Overall Relevant Experience: 12 years Min. Experience in Similar Role/Projects: 2 years Min. Regional (Middle East) Experience: 5 years Location: Project site, Riyadh, Kingdom of Saudi Arabia (Construction Supervision services) Language: Fluent spoken, read, and written English require<br>d<br>Job Title: Senior Civil & Structural Engineers Role Purpose:Supervise civil, structural, and roadworks construction, ensuring compliance with design and applicable standards. Key Responsibilities:• Technical Supervision — Provide civil and structural supervision for earthworks, roads, and drainage works.• Submittal Review — Review contractor shop drawings, material submittals, and design compliance.• Site Verification — Inspect and verify civil/structural works and roadworks on site.• Issue Resolution — Identify and resolve technical issues, coordinating with the Design Manager as needed.• Reporting Support — Support the Resident Engineer in supervision and progress reporting of civil work<br>s.<br>• Experience with structural works for bridges, culverts, or road interchanges.• Familiarity with coordinating civil works around utility corridors (wet/dr<br>y).<br>Supervises civil, structural, and roadworks construction, reviewing submittals and verifying site compliance with design and specificati<br>ons.<br>Provides civil and structural technical oversight across multiple road and infrastructure packages within large-scale developments, ensuring construction quality across complex work fr<br>onts.

Architectural Engineer (Fresh Graduate) The ideal candidate is a motivated and detail-oriented Architectural Engineering graduate with a passion for design, innovation, and continuous professional development. The successful candidate will support the architectural design team by preparing technical drawings, developing BIM models, coordinating with multidisciplinary teams, and ensuring compliance with project requirements, company standards, and industry best practices. Responsibilities Prepare architectural drawings, plans, and layouts using Auto CAD. Assist in developing and maintaining BIM models using Autodesk Revit. Coordinate architectural designs with structural, MEP, and other engineering disciplines. Support the preparation of technical documentation, shop drawings, and project deliverables. Participate in site visits to monitor project progress and ensure compliance with approved designs. Collaborate effectively with project teams to achieve project objectives and deadlines. Ensure compliance with company procedures, quality standards, and relevant codes and regulations. Qualifications Saudi National. Bachelor's degree in Architectural Engineering. Fresh graduate (0–1 year of experience). Registered with the Saudi Council of Engineers as an Architectural Engineer. Proficiency in Auto CAD. Basic knowledge of BIM Modeling and Autodesk Revit. Ability to read and interpret architectural drawings and technical documents. Strong communication, coordination, and teamwork skills. Passion for learning, professional growth, and immediate contribution to the team. Riyadh resident. Available for immediate joining.???? Location: Riyadh, Saudi Arabia???? Apply: hr@osloob.sa

<p>Job description:</p><p>LITCO Group is looking for an experienced Project Execution Engineer to join our team for steel structure projects in Saudi Arabia. The successful candidate will be responsible for managing day-to-day project execution, coordinating site operations, supervising subcontractors, and ensuring all activities are completed in accordance with approved drawings, quality standards, project schedules, and client requirements.</p><p>The ideal candidate should possess strong experience in steel structure fabrication, erection, installation, inspection coordination, and end-to-end project execution.</p><p>Key Responsibilities</p><p>Project Execution</p><ul><li>Lead and coordinate steel structure fabrication, erection, and installation activities from planning through final project completion.</li><li>Oversee execution involving structural elements such as columns, beams, trusses, bracing systems, and steel platforms.</li><li>Ensure project activities are completed in accordance with approved drawings, specifications, and construction schedules.</li><li>Monitor daily site progress and proactively resolve technical or execution-related issues.</li><li>Coordinate manpower, equipment, materials, and subcontractors to achieve project milestones.</li></ul><p>Technical Coordination</p><ul><li>Review structural drawings, shop drawings, BOQs, IFC drawings, and technical specifications before execution.</li><li>Coordinate with engineering, procurement, QA/QC, HSE, and construction teams.</li><li>Identify drawing discrepancies and provide practical solutions to maintain progress.</li><li>Verify site conditions before commencing work.</li></ul><p>Inspection &amp; Documentation</p><ul><li>Prepare, submit, and monitor MIR and WIR/WMR documentation.</li><li>Coordinate inspections with consultants, inspectors, clients, and QA/QC teams.</li><li>Ensure inspection approvals are obtained without affecting project schedules.</li><li>Maintain project documentation, progress reports, inspection records, and site correspondence.</li></ul><p>Stakeholder &amp; Subcontractor Management</p><ul><li>Supervise subcontractors and monitor productivity, quality, and compliance.</li><li>Coordinate with consultants, inspectors, clients, and internal departments throughout the project lifecycle.</li><li>Conduct regular coordination meetings to ensure smooth execution.</li><li>Ensure all stakeholders are informed of project progress and technical issues.</li></ul><p>Quality &amp; Safety</p><ul><li>Ensure all works comply with approved specifications, project quality requirements, and company procedures.</li><li>Coordinate closely with QA/QC and HSE teams to maintain quality and safe work practices.</li><li>Support corrective actions arising from inspections and site observations.</li></ul><p>Requirements</p><ul><li>Bachelor's Degree in Civil Engineering or a related Engineering discipline.</li><li>Minimum 4 years of engineering experience in Saudi Arabia.</li><li>Strong background in steel structure fabrication, erection, and installation projects.</li><li>Proven experience handling projects involving columns, beams, trusses, and structural steel members from planning through final handover.</li><li>Hands-on experience with MIR and WIR/WMR submissions and inspection coordination.</li><li>Experience managing subcontractors and coordinating with consultants, inspectors, and clients.</li><li>Ability to read and interpret structural drawings, shop drawings, IFC drawings, BOQs, and technical specifications.</li><li>Excellent communication, coordination, leadership, and problem-solving skills.</li><li>Ability to manage multiple activities while maintaining quality, safety, and project schedules</li></ul>

Level 2 Support Engineer – IBM Integration Job Summary We are looking for a Level 2 Support Engineer with experience in IBM Integration technologies to support and maintain integration platforms across production and non-production environments. The role involves troubleshooting issues, managing incidents, performing deployments, and ensuring system stability. Key Responsibilities Investigate and resolve L2 support incidents and service requests. Perform log analysis, API validation, and SQL/database troubleshooting. Support IBM integration platforms, including App Connect, IIB/ESB, Web Sphere, API Connect, and Data Power. Deploy releases to pre-production and production environments. Execute post-deployment verification and smoke testing. Work with L1, development, QA, and infrastructure teams to resolve issues. Document solutions and maintain support knowledge articles. Required Skills IBM App Connect (ACE) IBM Integration Bus (IIB) / ESBIBM Web Sphere IBM API Connect IBM Data Power (DP) API Integration SQL (Oracle, SQL Server, Postgre SQL, MySQL) Git, Jenkins, CI/CDPreferred Qualifications Experience in application/integration support or production support. Strong troubleshooting and problem-solving skills. Exposure to AWS, Azure, or GCP is a plus. Good communication and documentation skills.

Senior Splunk Engineer – L3<br>Location: Riyadh, KSA<br>We are looking for an experienced Senior Splunk Engineer (L3) to join our team in Riyadh, KSA. The role will be responsible for providing advanced technical support, troubleshooting complex Splunk issues, optimizing the environment, and driving technical solutions.<br>Key Responsibilities<br>Provide L3 technical support for complex Splunk incidents and escalations. Administer, optimize, and troubleshoot enterprise Splunk environments. Develop advanced SPL queries, dashboards, reports, alerts, and correlation searches. Design and implement Splunk integrations and data onboarding solutions. Perform performance tuning, capacity planning, and environment optimization. Troubleshoot complex issues across Splunk components and integrations. Support Splunk architecture, upgrades, configurations, and deployments. Identify recurring issues and implement solutions to improve platform stability and performance. Provide technical guidance and mentorship to L1/L2 engineers. Maintain technical documentation, standards, and operational procedures.<br>Requirements<br>Strong hands-on experience with Splunk administration and engineering. Advanced knowledge of SPL, data onboarding, dashboards, alerts, and integrations. Experience troubleshooting complex enterprise Splunk environments. Strong understanding of log management, monitoring, and security operations. Experience with Splunk architecture, performance optimization, and platform management. Strong analytical, troubleshooting, and problem-solving skills. Relevant Splunk certifications will be an advantage.

Job Title: Safety Engineer Department: Facility Management Services (FMS) Reports To: FMS Manager<br>Job Summary The Safety Engineer is responsible for developing, implementing, and monitoring health and safety programs to ensure a safe environment for patients, visitors, and employees. The role supports compliance with occupational health and safety regulations, hospital policies, and risk management standards while promoting a strong culture of safety across the organization.<br>Key Responsibilities Develop, implement, and monitor health and safety policies, procedures, and risk management programs across the hospital Conduct safety inspections, risk assessments, and incident investigations, and recommend corrective and preventive actions Monitor compliance with occupational health and safety regulations, fire safety requirements, and hospital policies Deliver safety training and awareness programs for employees and support emergency preparedness initiatives Prepare safety reports, maintain regulatory documentation, and monitor key health and safety performance indicators<br>Qualifications Bachelor's degree in Safety Engineering, Occupational Health and Safety, Environmental Engineering, or a related field3+ years of experience in health and safety, risk management, or a related field Healthcare or hospital experience is preferred Professional certifications such as NEBOSH, OSHA, or equivalent are an advantage

Job Title:Planning Engineer IIILocation: Saudi Arabia<br>Role Purpose:Collaborate with Senior Planning Engineer to prepare, update, and supervise project schedules, coordinate site teams, monitor progress, generate reports, and assist in baseline preparation.<br>DUTIES PREFORMED:Key Accountabilities Key Activities Schedule Preparation & Updating Prepare and update schedules per applicable procedures using Primavera P6. Look-Ahead Planning Prepare and follow up on look-ahead construction plans across disciplines. Progress Monitoring Monitor subcontractors and suppliers, conduct site visits to verify progress consistency with schedule. Reporting & Documentation Produce daily, weekly, and monthly reports for project teams and clients. Project Progress Calculation Supervise project progress calculation via relevant software tools. Baseline & Resource Management Collect data for baseline updates, extract resource usage for manpower, commodity installation, and progress curves. Baseline & Claim Preparation Assistance Assist in the preparation of project baselines and time claim.<br><br>JOB SPECIFICATIONSIndustry / Domain Construction Necessary Knowledge and Experience4–6 years in Planning or Project planning and Control, Construction preferred. Education and Certification Minimum Requirements Bachelor’s degree in Engineering, Construction Management, Business, Finance, or Related Field Job Specific Technical Skills Primavera P6, MS Excel, Scheduling techniques, Progress Monitoring, Reporting

We are currently seeking a detail-oriented and experienced Procurement Engineer to join our team, to be based in Riyadh, KSA. Procurement Engineer supports the procurement department in sourcing materials, services, and equipment at competitive prices while ensuring quality, compliance, and timely delivery. This role assists in vendor coordination, Supplier contract negotiations, purchase order processing, and maintaining procurement documentation.<br>Key Responsibilities:Assist in sourcing strategic high-value suppliers and obtaining quotations. Prepare and issue Request for Quotations Knowledge on Supplier contracts negotiations and finalization is must Candidate shall be well versed with major commercial terms Compare supplier quotations (price, delivery, payment terms). Prepare comparison statements for management review. Generate and process Purchase Orders Follow up with suppliers for order confirmation and delivery status. Support vendor registration and prequalification process. Ensure compliance with company procurement policies. Assist in cost-saving initiatives. Resolve basic supplier or delivery-related issues.<br>Qualifications Bachelor’s degree Electrical Engineering.8-10 years of procurement or purchasing experience Basic knowledge of procurement procedures. Familiarity with ERP systems (SAP, Oracle, or similar) is an advantage Good knowledge of MS Office.

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Job Description <br></p><br><p>We are hiring an experienced <strong>Scaffold Design Engineer</strong> forreputed Company in <strong>Saudi Arabia</strong></p><br><br><br><p><strong><u>Key Responsibilities</u></strong></p><br><br><ul><li><p>Prepare and develop scaffold design drawings, calculations, and technical documents.</p><br><br></li><li><p>Design complex and heavy-duty scaffolding systems for industrial projects.</p><br><br></li><li><p>Submit scaffold design packages for client approval, including ARAMCO submissions.</p><br><br></li><li><p>Perform structural analysis and stability calculations for scaffolding structures.</p><br><br></li><li><p>Ensure compliance with ARAMCO standards, OSHA requirements, and relevant international codes.</p><br><br></li><li><p>Coordinate with project teams, site engineers, and scaffold supervisors regarding design requirements.</p><br><br></li><li><p>Review site conditions and provide engineering solutions for scaffold-related challenges.</p><br><br></li><li><p>Support construction and maintenance activities with safe and cost-effective scaffold designs.</p><br><br></li><li><p>Prepare material take-offs and design reports.</p><br><br></li><li><p>Provide technical guidance during scaffold erection and dismantling activities.</p><br><br></li></ul>Requirements <br><ul><li><p>Bachelor's Degree in Civil Engineering.</p><br><br></li><li><p>Minimum 5+ years of experience as a Scaffold Design Engineer.</p><br><br></li><li><p>Proven experience in ARAMCO scaffold design submissions and approvals.</p><br><br></li><li><p>Strong knowledge of structural engineering principles and scaffold design software.</p><br><br></li><li><p>Registered with the Saudi Council of Engineers (SCE).</p><br><br></li><li><p>Familiarity with international standards such as OSHA, BS EN, TG20, and ARAMCO requirements.</p><br><br></li><li><p>Ability to prepare structural calculations and engineering reports independently.</p><br><br></li><li><p>Excellent communication and coordination skills.</p><br><br></li></ul><br> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> No experience required </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

<b>Join SANY Saudi Arabia as a Sales Engineer!</b><br>We are seeking a dynamic and results-driven Sales Engineer to join our team and drive business growth in the fields of interior prefabrication, architectural finishing, and building materials.<br><br><b>Your Key Responsibilities:</b><ul><li>Identify and develop new business opportunities across overseas markets.</li><li>Track project opportunities, develop customer relationships, and manage business negotiations.</li><li>Handle the full project lifecycle, including order acquisition, contract signing, execution, delivery, and payment collection.</li><li>Build and maintain strong relationships with Chinese-funded enterprises, foreign companies, local government entities, and key stakeholders.</li><li>Conduct regular client visits, follow-ups, and market expansion activities to secure new projects and orders.</li><li>Achieve sales targets and contribute to the department's annual business objectives.</li></ul><br><b>Requirements:</b><ul><li>Bachelor's degree in Engineering, Business, or a related field.</li><li>Proven experience in market development within the international engineering, construction, building materials, or architectural finishing industry.</li><li>Strong customer network and business development capabilities.</li><li>Experience working with Chinese-funded organizations and international project stakeholders is preferred.</li><li>Fluency in Arabic or English is required.</li><li>Strong communication, negotiation, and relationship-building skills.</li><li>Self-motivated, detail-oriented, quick learner, and able to work effectively under pressure.</li></ul>