Mechanical Drafts Man Jobs in Saudi

Role Description: We are looking for a qualified Mechanical Technician to join our team. He will perform routine and preventive maintenance on mechanical equipment and systems, ensuring reliable and efficient operation. Day-to-day tasks include inspecting machinery, diagnosing mechanical issues, performing repairs and adjustments, and replacing parts as needed. <br>Requirements:* Diploma in General Mechanical Engineering (Mandatory).* Ability to perform mechanical maintenance and troubleshoot equipment.* Strong problem-solving skills and attention to detail.* Ability to work effectively in a team environment.* Commitment to safety and company procedures.<br>Key Responsibilities:* Perform preventive and corrective mechanical maintenance.* Inspect, diagnose, and repair mechanical equipment.* Ensure compliance with safety and quality standards.* Maintain accurate maintenance records and reports.

Job Description: Mechanical Technician Job Title: Mechanical Technician Job Purpose:Perform preventive and corrective maintenance of mechanical equipment and systems at the wastewater treatment plant to ensure reliable operation, minimize equipment downtime, maintain asset integrity, and comply with health, safety, and environmental (HSE) standards. Key Responsibilities:Perform preventive and corrective maintenance activities in accordance with approved maintenance schedules. Operate, inspect, and maintain pumps, motors, valves, sludge handling systems, piping systems, and other mechanical equipment within the wastewater treatment plant. Conduct routine inspections to verify equipment reliability and identify abnormal operating conditions. Diagnose mechanical failures, perform repairs, and replace defective components as required. Carry out equipment disassembly, assembly, alignment, and installation activities. Assist in the maintenance of aeration equipment, mixers, conveyors, rotating equipment, and other mechanical systems. Perform lubrication activities and monitor lubricant levels in accordance with manufacturers' recommendations. Record maintenance activities, equipment history, and repair details using the organization's maintenance documentation or CMMS. Comply with Health, Safety, and Environmental (HSE) policies, procedures, and permit-to-work requirements while performing maintenance activities. Maintain a clean, safe, and organized work area and ensure proper use of tools and equipment. Coordinate with Operations, Electrical, and Instrumentation teams to ensure continuous and efficient plant operation. Participate in scheduled shutdowns, emergency maintenance, and plant commissioning activities when required. Perform any other related duties assigned by the direct supervisor. Qualifications:Diploma in Mechanical Engineering, Mechanical Technology, or a related technical discipline. Experience:Previous experience in the operation and maintenance of wastewater treatment plants, water treatment plants, or industrial facilities is preferred. Required Skills:Knowledge of mechanical equipment commonly used in wastewater treatment plants. Ability to read and interpret mechanical drawings, manuals, and maintenance procedures. Strong troubleshooting and mechanical repair skills. Proficiency in using mechanical tools, measuring instruments, and maintenance equipment. Understanding of preventive and corrective maintenance practices. Commitment to Health, Safety, and Environmental (HSE) requirements. Ability to work effectively within a team and on shift schedules when required.

JOB PURPOSE:To support and execute project Mechanical commissioning activities assigned. To implement ACWA Power Commissioning Standards and best practices on site for Mechanical systems. To ensure pre-commissioning, commissioning, and functional testing of Mechanical systems are carried out thoroughly and in compliance with project requirements. To collaborate with EPC, Project Company, and NOMAC teams to ensure safe, reliable, and efficient commissioning, and to demonstrate full operational readiness of assigned Mechanical systems in accordance with OTS.<br>Assist in reviewing EPC Contractor’s Mechanical commissioning procedures and test plans. Participate in pre-commissioning and commissioning of Mechanical systems including pumps, compressors, piping, valves, boilers, HRSGs, turbines, and auxiliaries. Execute functional testing, system flushing, leak testing, alignment, and troubleshooting under guidance of the Senior Mechanical Commissioning Manager. Perform inspections and pre-commissioning checks to ensure compliance with design specifications and codes. Record test results and prepare commissioning reports for acceptance. Coordinate with design, construction, electrical, I&C, and DCS teams to resolve technical issues. Liaise with vendors and OEMs during testing and troubleshooting. Support documentation reviews (test reports, as-built drawings, commissioning records). Ensure compliance with project specifications, industry standards, and safety regulations. Implement safety measures during Mechanical testing and commissioning activities. Participate in safety audits and risk assessments. Work under the direction of the Senior Mechanical Commissioning Manager and collaborate with commissioning team members. Support knowledge sharing and teamwork across commissioning disciplines. Support junior engineers and technicians in day-to-day commissioning tasks as delegated. Adhere to approved departmental policies, processes, and procedures. Apply ACWA Power Commissioning processes and best practices during project execution.<br>Minimum Qualifications Bachelor’s Degree Mechanical Engineering, or related discipline.. Minimum years of Experience5–7 years of experience in the Power and/or Water industry with a minimum of 5 years in Mechanical commissioning roles on large projects. EPC-side commissioning experience is preferred. Minimum Skills Knowledge of Mechanical commissioning procedures, flushing, leak testing, alignment, and functional testing. Proficiency in testing and inspection tools. Familiarity with rotating equipment, piping systems, valves, boilers, HRSGs, and turbines. Experience in multicultural and complex project environments.

<ul><li>Oversee the installation, commissioning, and startup of mechanical systems on-site, ensuring adherence to design specifications and safety protocols.</li><li>Diagnose and resolve complex mechanical equipment failures and performance issues in real-time, minimizing downtime and operational disruptions.</li><li>Conduct thorough site inspections and performance testing of machinery, identifying potential risks and recommending proactive maintenance strategies.</li><li>Collaborate with project managers and clients to define project scope, technical requirements, and installation timelines for mechanical components.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Bachelor's degree in Mechanical Engineering or a related field from an accredited institution.</p></li><li><p>Minimum of 7 years of progressive experience in field engineering, with a strong focus on mechanical systems in powerplants.</p></li><li><p>Proficiency in reading and interpreting complex engineering blueprints, schematics, and P&IDs.</p></li><li><p>Demonstrated expertise in troubleshooting and repairing rotating equipment, pumps, compressors, and static equipment.</p></li></ul>

Awtad is looking for a dedicated and skilled Mechanical Engineer to join our engineering team. The Mechanical Engineer will be responsible for designing, developing, and overseeing the installation and maintenance of mechanical systems within our projects. This role requires a strong foundation in mechanical engineering principles, excellent problem-solving skills, and the ability to work collaboratively with cross-functional teams to deliver high-quality and efficient mechanical solutions.<br><br>Responsibilities<br><br>Assist in preparing and reviewing mechanical engineering drawings and technical plans Monitor the execution of mechanical works on-site and ensure compliance with approved specifications Participate in the inspection and testing of mechanical systems and equipment Prepare periodic technical reports on work progress and engineering observations Coordinate with different engineering teams to ensure project execution according to established schedules Assist in quantity surveying and reviewing materials and equipment required for projects Support preventive and corrective maintenance activities for mechanical systems and equipment Adhere to quality, health, safety, and environmental standards during project execution Participate in troubleshooting technical issues and proposing suitable improvements Utilize engineering software to prepare designs, calculations, and technical reports Follow up with contractors and suppliers to ensure compliance with approved specifications Perform any other engineering duties assigned by the direct manager<br><br>Requirements<br><br>Bachelor's Degree in Mechanical Engineering Fresh graduate or up to one year of relevant experience Valid membership in the Saudi Council of Engineers or eligibility for registration Proficiency in Microsoft Office applications Familiarity with Auto CAD and other related engineering software is preferred Ability to work effectively within a team and demonstrate strong communication skills. <br><br>Benefits<br><br>Private Health Insurance Training & Development Performance Bonus Paid Time Off

A leading MEP Contracting Company in Riyadh, Saudi Arabia is looking for an experienced Mechanical Engineer to join our growing team.- Location: Riyadh, Saudi Arabia- Experience: 5–10 years in MEP/Construction projects<br>Key Responsibilities:Supervise and manage on-site mechanical works in accordance with project specifications and approved drawings. Coordinate with civil, electrical, and structural teams to ensure seamless integration of mechanical systems. Oversee the installation of HVAC, plumbing, fire protection, and other mechanical systems. Ensure all mechanical works comply with applicable codes, standards, and quality requirements. Monitor project progress and coordinate with contractors, subcontractors, and suppliers to ensure timely project delivery. Review mechanical drawings, specifications, and technical documents. Provide technical support and resolve on-site engineering issues efficiently. Prepare method statements, risk assessments, and support project planning activities. Enforce HSE regulations and company safety policies through regular inspections and audits. Attend site meetings and provide progress updates to the project management team. Maintain accurate project documentation, daily reports, progress reports, and material records. Requirements:✔ Bachelor's Degree in Mechanical Engineering.✔ 5–10 years of experience in MEP or construction contracting projects.✔ Strong experience in HVAC, Plumbing, Fire Fighting, and Mechanical Systems.✔ Excellent knowledge of site execution, testing & commissioning, quality control, and project coordination.✔ Ability to read and interpret mechanical drawings and technical specifications.✔ Strong communication, leadership, and problem-solving skills.

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Senior Mechanical Engineer - ID 35306 GCC / Saudi Arabia 10-15 Years experience SAR 15000 - 20000 Package On-site Apply for this job Job Summary: Our client is seeking a highly experienced Senior Mechanical Engineer to join our team in Riyadh. The ideal candidate will have strong expertise in mechanical systems design and execution, particularly in HVAC, firefighting, plumbing, and infrastructure projects. Key Responsibilities: Prepare, review, and validate mechanical designs, shop drawings, and technical submittals Oversee installation and execution of HVAC, firefighting, and plumbing systems Ensure compliance with project specifications, standards, and regulatory requirements Coordinate with multidisciplinary teams including civil, electrical, and project management Provide technical support during project execution and resolve on-site issues Review contractor submissions and ensure quality and accuracy Monitor project progress and ensure timely delivery of mechanical works</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"><b>Requirements:</b></p><ul><li>Bachelor s degree in Mechanical Engineering</li><li>12 to 16 years of relevant experience</li><li>Strong knowledge of HVAC, firefighting, plumbing systems, and infrastructure works</li><li>Proven experience in preparing and reviewing mechanical designs, shop drawings, and submittals</li><li>Prior experience with EPC and contracting companies is essential</li><li>Previous work experience in Saudi Arabia is required</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>In a world of possibilities, pursue one with endless opportunities. Imagine Next! At Parsons, you can imagine a career where you thrive, work with exceptional people, and be yourself. Guided by our leadership vision of valuing people, embracing agility, and fostering growth, we cultivate an innovative culture that empowers you to achieve your full potential. Unleash your talent and redefine what s possible.</p><p>Parsons is seeking an experienced Mechanical Expert to provide technical leadership and expertise across the design, execution, and operation of mechanical systems. The successful candidate will support project teams in delivering efficient, reliable, and compliant mechanical solutions while ensuring adherence to industry standards, project requirements, and best engineering practices.</p><p>What You'll Be Doing</p><ul><li>Provide expert guidance on mechanical design, engineering, and specifications.</li><li>Review and approve technical deliverables, drawings, calculations, and engineering documentation.</li><li>Support project teams in resolving complex mechanical engineering challenges and technical issues.</li><li>Ensure compliance with applicable standards, codes, regulations, and industry best practices.</li><li>Collaborate with stakeholders to align technical solutions with project objectives and operational requirements.</li><li>Contribute to quality assurance processes and continuous improvement initiatives across projects.</li></ul><p>What Required Skills You'll Bring</p><ul><li>Bachelor s degree in Mechanical Engineering or a related discipline.</li><li>Minimum 10 years of relevant experience in mechanical engineering and project delivery.</li><li>Strong technical expertise in the design, installation, operation, and maintenance of mechanical systems.</li><li>Demonstrated experience reviewing engineering designs, technical submissions, and project deliverables.</li><li>Good understanding of applicable mechanical engineering standards, codes, and best practices.</li><li>Strong analytical, troubleshooting, and problem-solving skills.</li><li>Excellent communication, coordination, and stakeholder management abilities.</li><li>Ability to work effectively within multidisciplinary teams and complex project environments.</li></ul><p>What Desired Skills You'll Bring</p><ul><li>Experience working on large-scale infrastructure, industrial, transportation, port, or terminal projects.</li><li>Professional Engineering certification, chartership, or equivalent professional accreditation.</li><li>Experience supporting testing, commissioning, and handover activities for mechanical systems.</li><li>Familiarity with asset management, reliability engineering, and operational optimization practices.</li><li>Knowledge of sustainability, energy efficiency, and modern mechanical system technologies.</li><li>Experience working on multidisciplinary projects involving multiple stakeholders.</li></ul><p>Parsons equally employs representation at all job levels no matter the race, color, religion, sex (including pregnancy), national origin, age, disability or genetic information. We truly invest and care about our employee s wellbeing and provide endless growth opportunities as the sky is the limit, so aim for the stars! Imagine next and join the Parsons quest APPLY TODAY!</p><p>Parsons is aware of fraudulent recruitment practices. To learn more about recruitment fraud and how to report it, please refer to https://www.parsons.com/fraudulent-recruitment/</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Bachelor s degree in Mechanical Engineering or a related discipline.</li><li>Minimum 10 years of relevant experience in mechanical engineering and project delivery.</li><li>Strong technical expertise in the design, installation, operation, and maintenance of mechanical systems.</li><li>Demonstrated experience reviewing engineering designs, technical submissions, and project deliverables.</li><li>Good understanding of applicable mechanical engineering standards, codes, and best practices.</li><li>Strong analytical, troubleshooting, and problem-solving skills.</li><li>Excellent communication, coordination, and stakeholder management abilities.</li><li>Ability to work effectively within multidisciplinary teams and complex project environments.</li><li>Experience working on large-scale infrastructure, industrial, transportation, port, or terminal projects.</li><li>Professional Engineering certification, chartership, or equivalent professional accreditation.</li><li>Experience supporting testing, commissioning, and handover activities for mechanical systems.</li><li>Familiarity with asset management, reliability engineering, and operational optimization practices.</li><li>Knowledge of sustainability, energy efficiency, and modern mechanical system technologies.</li><li>Experience working on multidisciplinary projects involving multiple stakeholders.</li></ul><p></p></section>

Greenland Group. is looking for Mechanical Technician- Low Voltage Assembly (MMEF, Saudi Arabia) Job Description / Responsibility Electro-Mechanical Integration: Assemble structural enclosures, panels, and mounting hardware for low-voltage devices. Wiring and Terminations: Route point-to-point wiring, solder connections, and install connectors (spade, ring lug, ferrule) per technical drawings. Testing and Diagnostics: Use multimeters, continuity testers, and other diagnostic tools to verify circuitry, troubleshoot faults, and perform validation tests. Educational Requirements Diploma in Engineering in Mechanical Engineering Skills Required: Electro Mechanical Work, Mechanical Design, Mechanical Fitting, Electrical Installation and Maintenance, Electrical Wiring Experience Requirements At least 3 year(s) The applicants should have experience in the following business area(s):Training Institutes,Travel Agent,Electronic Equipment/Home Appliances,Overseas Companies,Group of Companies,Electric Wire/Cable Job Location Saudi Arabia Salary Tk. 43000 - 66000 (Monthly)

Job Title: Mechanical Manager Location: Saudi Arabia Industry: Oil & Gas (EPC / Construction / Maintenance / Shutdown) Company: NSH Saudi Job Summary NSH Saudi is seeking an experienced Mechanical Manager to lead and oversee all mechanical activities for major Oil & Gas projects. The successful candidate will be responsible for managing project execution, ensuring compliance with client specifications and international standards, while delivering projects safely, on time, within budget, and to the highest quality standards. Key Responsibilities Manage and supervise all mechanical construction, installation, maintenance, and commissioning activities. Lead multidisciplinary mechanical teams, including engineers, supervisors, foremen, and subcontractors. Plan, organize, and monitor mechanical works to ensure adherence to project schedules and milestones. Coordinate with engineering, procurement, planning, QA/QC, HSE, and client representatives to ensure seamless project execution. Review engineering drawings, specifications, method statements, and work procedures before execution. Ensure all mechanical works comply with project specifications, international codes, and client requirements. Monitor project progress, productivity, manpower, equipment utilization, and resource allocation. Identify project risks and implement corrective actions to minimize delays and cost overruns. Support project planning, budgeting, cost control, and forecasting activities. Participate in project review meetings and provide regular progress updates to senior management. Ensure compliance with HSE policies and promote a strong safety culture across all project activities. Review and approve work packs, material requisitions, technical queries, and project documentation. Liaise with clients, consultants, vendors, and subcontractors to resolve technical and execution-related issues. Support pre-commissioning, commissioning, mechanical completion, and project handover activities. Requirements Bachelor's Degree in Mechanical Engineering. Minimum 10–15 years of experience in Oil & Gas, EPC, Construction, Maintenance, or Shutdown projects. At least 5 years in a managerial role leading large mechanical teams. Experience on Saudi Aramco or other major Oil & Gas projects is highly preferred. Strong knowledge of piping, static equipment, rotating equipment, steel structures, tanks, pressure vessels, and mechanical installation practices. Familiarity with ASME, API, ASTM, ANSI, and other relevant international standards. Strong leadership, planning, and project management skills. Excellent communication and stakeholder management abilities. Proficiency in Microsoft Office and project management software.

Company Overview:<br>Dar, the founding member of the Sidara group, is an international multidisciplinary consulting organization specializing in engineering, architecture, planning, environment, project management, facilities management, and economics. Sidara operates in 60 countries with 20,500 professionals, Dar connects people, places, and communities through innovative solutions to the world's most complex challenges. We deliver projects from inception through completion, embracing challenges to empower communities worldwide. Learn more at www.dar.com.<br>Our Vision and Values:<br>We aspire to be the chosen home of those with a gift for crafting solutions that empower people and an unwavering passion for learning and innovation. Our core values shape our culture and guide our decision-making. We are committed to:<br>Excellence Responsibility Empowerment Connectivity Courage<br><br>Role Overview:<br>The Mechanical inspector is responsible for supervising mechanical works across infrastructure projects, ensuring full compliance with approved designs, specifications, and applicable standards. The role involves reviewing mechanical design and shop drawings, monitoring site implementation, and overseeing quality control to ensure functionality, safety, and performance of mechanical systems.<br>Key Responsibilities:<br>Review and provide feedback on mechanical design drawings, shop drawings, and material submittals. Supervise installation, testing, and commissioning of mechanical systems such as pumping stations, utilities, HVAC, and pipeline networks. Monitor site execution to ensure adherence to approved construction sequences and safety requirements. Conduct inspections, witness pressure tests, and verify compliance with project specifications. Review technical correspondences, RFIs, and contractor submissions with timely professional input. Identify and resolve technical challenges through coordination with design and construction teams. Ensure mechanical works meet required standards of quality, safety, and regulatory compliance.<br>Qualifications & Experience:<br>Bachelor’s Degree in Mechanical Engineering. Minimum of 9 years of experience. Proven experience in reviewing mechanical designs and shop drawings. Must have experience working in roads, bridges, and tunnels projects. Strong knowledge of mechanical systems, utilities, and relevant standards (ASHRAE, SMACNA, ASTM, etc.). Excellent problem-solving, communication, and leadership skills.

ABOUT THE JOB<br>We are seeking a qualified Mechanical Inspector to join our Project and Construction Management team for a major Roads Program in the Kingdom of Saudi Arabia. This role sits within our Infrastructure Division and is essential to ensure that all mechanical work, particularly those related to utilities, pumping stations, mechanical equipment, and associated infrastructure, are executed to the required standards of quality, safety, and compliance. As a Mechanical Inspector, you will supervise and inspect contractors’ mechanical installations on site, verify compliance with approved drawings and specifications, and support the project team in delivering high‑quality construction supervision services.<br>KEY RESPONSIBILITIESMain descriptions of the job position:Conduct daily inspections of mechanical works, including piping systems, pumping stations, valves, mechanical equipment installation, HVAC systems (if applicable), fire‑fighting networks, and utility-related mechanical components. Ensure that all materials, equipment, and workmanship comply with project specifications, approved drawings, and relevant international standards. Monitor contractors’ activities to ensure adherence to QA/QC procedures, approved method statements, and safety requirements. Report non‑conformances (NCRs), potential issues, or safety violations to senior staff and follow up on corrective actions. Maintain accurate and detailed records of inspections, site observations, test results, and daily progress activities. Coordinate with the materials testing laboratory and third‑party testing agencies to verify mechanical testing requirements and ensure timely results. Review and verify contractors’ Requests for Inspection (RFIs) and participate in approval and acceptance processes. Support the Senior Mechanical Engineer in reviewing shop drawings, method statements, material submittals, and technical documentation. Assist in verifying mechanical as‑built works and handover documentation during project close‑out. Foster strong coordination and communication with other discipline inspectors and project stakeholders to ensure effective and seamless site operations.<br>ABOUT YOUDiploma or bachelor’s degree in mechanical engineering, Mechanical Technology, or a related discipline. Minimum of 7 years of experience in construction supervision, preferably on infrastructure, utilities, pumping stations, or mechanical systems within major projects. Strong understanding of mechanical systems, piping works, equipment installation, and quality control requirements. Familiarity with international standards such as ASME, ASTM, API, NFPA, or equivalent. Experience working with government entities or major PMCM infrastructure projects in KSA is an advantage. Ability to read and interpret mechanical drawings, P&IDs, and technical specifications. Strong attention to detail, reporting accuracy, and problem‑solving skills. Proficiency in English; Arabic language skills are an added benefit. Strong communication and teamwork abilities within a multicultural environment<br>ABOUT USWe are an Association of Professionals working in the areas of Engineering on projects that contribute to a more sustainable world. Our ownership structure creates a culture of engagement, to offer the best service for the client, while its people develop on both a professional and personal level. Therefore, our most important assets are the expertise and experience of its people. Highly qualified and skilled professionals, deeply united, working within a framework of professional liberty and integrity, with a strong commitment to progress, development, quality service, and innovation. Since its foundation in 1957, the company has grown steadily and is now a multidisciplinary and integrated multinational organization, with more than 4,300 people working in over 130 countries.

ABOUT THE JOB<br>We are seeking a qualified Mechanical Inspector to join our Project and Construction Management team for a major Roads Program in the Kingdom of Saudi Arabia. This role sits within our Infrastructure Division and is essential to ensure that all mechanical work, particularly those related to utilities, pumping stations, mechanical equipment, and associated infrastructure, are executed to the required standards of quality, safety, and compliance. As a Mechanical Inspector, you will supervise and inspect contractors’ mechanical installations on site, verify compliance with approved drawings and specifications, and support the project team in delivering high‑quality construction supervision services.<br>KEY RESPONSIBILITIESMain descriptions of the job position:Conduct daily inspections of mechanical works, including piping systems, pumping stations, valves, mechanical equipment installation, HVAC systems (if applicable), fire‑fighting networks, and utility-related mechanical components. Ensure that all materials, equipment, and workmanship comply with project specifications, approved drawings, and relevant international standards. Monitor contractors’ activities to ensure adherence to QA/QC procedures, approved method statements, and safety requirements. Report non‑conformances (NCRs), potential issues, or safety violations to senior staff and follow up on corrective actions. Maintain accurate and detailed records of inspections, site observations, test results, and daily progress activities. Coordinate with the materials testing laboratory and third‑party testing agencies to verify mechanical testing requirements and ensure timely results. Review and verify contractors’ Requests for Inspection (RFIs) and participate in approval and acceptance processes. Support the Senior Mechanical Engineer in reviewing shop drawings, method statements, material submittals, and technical documentation. Assist in verifying mechanical as‑built works and handover documentation during project close‑out. Foster strong coordination and communication with other discipline inspectors and project stakeholders to ensure effective and seamless site operations.<br>ABOUT YOUDiploma or bachelor’s degree in mechanical engineering, Mechanical Technology, or a related discipline. Minimum of 7 years of experience in construction supervision, preferably on infrastructure, utilities, pumping stations, or mechanical systems within major projects. Strong understanding of mechanical systems, piping works, equipment installation, and quality control requirements. Familiarity with international standards such as ASME, ASTM, API, NFPA, or equivalent. Experience working with government entities or major PMCM infrastructure projects in KSA is an advantage. Ability to read and interpret mechanical drawings, P&IDs, and technical specifications. Strong attention to detail, reporting accuracy, and problem‑solving skills. Proficiency in English; Arabic language skills are an added benefit. Strong communication and teamwork abilities within a multicultural environment<br>ABOUT USWe are an Association of Professionals working in the areas of Engineering on projects that contribute to a more sustainable world. Our ownership structure creates a culture of engagement, to offer the best service for the client, while its people develop on both a professional and personal level. Therefore, our most important assets are the expertise and experience of its people. Highly qualified and skilled professionals, deeply united, working within a framework of professional liberty and integrity, with a strong commitment to progress, development, quality service, and innovation. Since its foundation in 1957, the company has grown steadily and is now a multidisciplinary and integrated multinational organization, with more than 4,300 people working in over 130 countries.

ABOUT THE JOB<br>We are seeking a qualified Mechanical Inspector to join our Project and Construction Management team for a major Roads Program in the Kingdom of Saudi Arabia. This role sits within our Infrastructure Division and is essential to ensure that all mechanical work, particularly those related to utilities, pumping stations, mechanical equipment, and associated infrastructure, are executed to the required standards of quality, safety, and compliance. As a Mechanical Inspector, you will supervise and inspect contractors’ mechanical installations on site, verify compliance with approved drawings and specifications, and support the project team in delivering high‑quality construction supervision services.<br>KEY RESPONSIBILITIESMain descriptions of the job position:Conduct daily inspections of mechanical works, including piping systems, pumping stations, valves, mechanical equipment installation, HVAC systems (if applicable), fire‑fighting networks, and utility-related mechanical components. Ensure that all materials, equipment, and workmanship comply with project specifications, approved drawings, and relevant international standards. Monitor contractors’ activities to ensure adherence to QA/QC procedures, approved method statements, and safety requirements. Report non‑conformances (NCRs), potential issues, or safety violations to senior staff and follow up on corrective actions. Maintain accurate and detailed records of inspections, site observations, test results, and daily progress activities. Coordinate with the materials testing laboratory and third‑party testing agencies to verify mechanical testing requirements and ensure timely results. Review and verify contractors’ Requests for Inspection (RFIs) and participate in approval and acceptance processes. Support the Senior Mechanical Engineer in reviewing shop drawings, method statements, material submittals, and technical documentation. Assist in verifying mechanical as‑built works and handover documentation during project close‑out. Foster strong coordination and communication with other discipline inspectors and project stakeholders to ensure effective and seamless site operations.<br>ABOUT YOUDiploma or bachelor’s degree in mechanical engineering, Mechanical Technology, or a related discipline. Minimum of 7 years of experience in construction supervision, preferably on infrastructure, utilities, pumping stations, or mechanical systems within major projects. Strong understanding of mechanical systems, piping works, equipment installation, and quality control requirements. Familiarity with international standards such as ASME, ASTM, API, NFPA, or equivalent. Experience working with government entities or major PMCM infrastructure projects in KSA is an advantage. Ability to read and interpret mechanical drawings, P&IDs, and technical specifications. Strong attention to detail, reporting accuracy, and problem‑solving skills. Proficiency in English; Arabic language skills are an added benefit. Strong communication and teamwork abilities within a multicultural environment<br>ABOUT USWe are an Association of Professionals working in the areas of Engineering on projects that contribute to a more sustainable world. Our ownership structure creates a culture of engagement, to offer the best service for the client, while its people develop on both a professional and personal level. Therefore, our most important assets are the expertise and experience of its people. Highly qualified and skilled professionals, deeply united, working within a framework of professional liberty and integrity, with a strong commitment to progress, development, quality service, and innovation. Since its foundation in 1957, the company has grown steadily and is now a multidisciplinary and integrated multinational organization, with more than 4,300 people working in over 130 countries.

About the Role:The Mechanical Site Inspector plays a crucial role in ensuring that mechanical installations and systems are executed according to the project specifications and standards. This position requires a keen eye for detail and a strong understanding of mechanical engineering principles. The inspector will be responsible for monitoring the installation process, conducting inspections, and ensuring compliance with safety regulations and quality standards. The ideal candidate will possess a blend of technical expertise and practical experience in the field, enabling them to effectively communicate with contractors and project managers.<br>What you will be doing:Monitor the installation of mechanical systems, including HVAC, plumbing, and fire protection systems. Conduct regular site inspections to ensure compliance with mechanical specifications and standards. Prepare detailed inspection reports and documentation of findings for project stakeholders. Provide technical guidance and support to construction teams as needed. Stay updated on industry trends and advancements in mechanical engineering practices. Review and interpret mechanical drawings and specifications to verify accuracy and completeness. Supervise and manage the processes related to the site work preparation, execution, verification, and validation of Contractor’s submissions, site works and effective implementation. Required Experience:3 years of experience in mechanical site field. Worked with reputable Consultant Engineering Firms needed. Full knowledge of Statutory Authorities requirements. Education:Bachelor's degree or Diploma in Mechanical Engineering field. Certifications & Memberships:Saudi Council of Engineers (SSE) Membership or any local engineer's society membership, i.e. CRPEP (for Bahrain). Essential Skills:Supervise site works and effective execution. Executes the specific inspections on materials, equipment and construction/installation activities on site. Strong analytical and problem-solving skills. Excellent communication and interpersonal abilities.

Job Description: Senior Mechanical Engineer**Location:** Jeddah, Saudi Arabia**Experience:** 10+ Years**Start Date:** Immediate<br>### Overview / <br>We are seeking an experienced Senior Mechanical Engineer with strong design capabilities and proven expertise in delivering complex and high-rise building projects. The successful candidate must be fully proficient in BIM workflows, familiar with the ACC (Autodesk Construction Cloud) platform, and well-versed in Saudi Building Codes and local authority requirements.<br>### Key Responsibilities / <br>- Lead the mechanical design of large-scale and high-rise building projects across HVAC, plumbing, firefighting, and mechanical systems.- Develop, review, and approve design documents including calculations, schematics, load calculations, equipment sizing, and system layouts.- Ensure all mechanical systems comply with Saudi Building Code (SBC), ASHRAE, NFPA, and local authority regulations.- Coordinate with multidisciplinary teams including architecture, structure, electrical, and infrastructure.- Manage BIM model development, clash detection, and coordination using Revit, Navisworks, and related tools.- Use ACC for model sharing, document control, and collaborative coordination with project teams.- Prepare and review technical reports, specifications, and tender documentation.- Support construction and site teams by reviewing RFIs, material submittals, shop drawings, and providing expert technical guidance.- Mentor junior mechanical engineers and ensure all design outputs meet project quality standards.<br> ### Qualifications & Requirements / <br>- Bachelor’s degree in Mechanical Engineering; Master’s degree is an advantage.- Minimum of 10 years of mechanical design experience, including high-rise or complex building projects.- Strong understanding of SBC, local authority requirements (Civil Defense, Municipality, Utilities), and international standards.- Advanced proficiency in BIM tools (Revit, Navisworks) and ACC platform.- Strong experience in HVAC design, plumbing systems, firefighting systems, and mechanical calculations software.- Strong communication, documentation, and coordination skills.- Fluent in English; Arabic language skills are an advantage.- Available to join immediately.

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>JOB PURPOSE / OBJECTIVE </p><br><p>Lead, plan, and manage all mechanical commissioning activities across installation, testing, and system-readiness phases for mechanical, marine, propulsion, and drilling equipment on offshore jack-up rigs, to ensure full compliance with project specifications, class requirements (ABS/DNV), and offshore regulatory standards, ultimately delivering a safe, fully operational, and acceptance-ready rig for final handover and deployment. The position provides technical leadership to commissioning teams and acts as a primary interface between construction, engineering, vendors, and the client. This position is responsible for executing onsite Pre-Commissioning and Commissioning activities and supporting the team in all onsite tasks. </p><br><p>KEY ACCOUNTABILITIES</p><br><p>• Develop commissioning procedures, test packs, checklists, and execution plans for all mechanical, marine, and utility systems to ensure structured and safe commissioning. &nbsp; </p><br><p>• Review mechanical designs, P&amp;IDs, GAs, system boundaries, and vendor documentation to confirm technical accuracy and commissioning readiness. &nbsp; </p><br><p>• Lead mechanical completion and commissioning phases from pre-commissioning through functional testing and final acceptance to achieve full system operability. &nbsp; </p><br><p>• Plan, organize, and execute FAT, HAT, and SAT for mechanical, marine, and drilling equipment to verify compliance with project and class requirements. &nbsp; </p><br><p>• Ensure all commissioning activities comply with ABS, DNV, SOLAS, API, and offshore regulatory standards to maintain certification integrity. &nbsp; </p><br><p>• Lead commissioning of drilling systems—including drawing works, top drive, rotary table, mud pumps, solids control, and well-control mechanical equipment—to ensure drilling readiness. &nbsp; </p><br><p>• Commission marine and jacking systems such as jacking units, preload systems, ballast/bilge systems, seawater cooling, fire main, deluge, and HVAC mechanical components to meet marine operational requirements. &nbsp; </p><br><p>• Commission power and utility systems including diesel engines, generators, compressors, fuel/lube oil systems, cooling water systems, cranes, winches, and safety-critical mechanical equipment to ensure reliable rig operations. </p><br><p> • Coordinate mechanical commissioning interfaces across construction, engineering, electrical, instrumentation, marine, and drilling disciplines to ensure seamless system integration. </p><br><p> • Manage OEM vendor activities during installation, testing, troubleshooting, and performance verification to maintain commissioning progress. </p><br><p> • Implement PTW, JSA, SIMOPS, and LOTO procedures to ensure safe execution of all mechanical commissioning tasks. </p><br><p> • Lead punch list creation, categorization, and closure for all mechanical systems to achieve mechanical completion and turnover readiness. </p><br><p> • Troubleshoot mechanical, hydraulic, and rotating equipment issues and recommend corrective actions to restore system functionality. </p><br><p> • Prepare and maintain commissioning documentation—including ITRs, test reports, redline drawings, and turnover dossiers—to support final acceptance and audits. </p><br><p> • Support rig startup, performance testing, and first-well operations and deliver a fully commissioned jack-up rig ready for offshore deployment.</p><br><p>QUALIFICATIONS &amp; EXPERIENCE</p><br><p>Education </p><br><p>• Bachelor’s degree in mechanical engineering or related discipline. </p><br><p> Professional Qualifications (Certifications &amp; Accreditations) </p><br><p> • Omega 365 PIMS knowledge will benefit. </p><br><p> • Drilling Equipment, Marine Systems &amp; Jacking System knowledge will benefit. </p><br><p> Competencies (Knowledge, Skills &amp; Abilities) </p><br><p> • Strong background in jack-up rig systems: jacking units, preload systems, marine systems, and drilling equipment. Hands-on experience with OEM packages (Cameron, NOV, MH Wirth, GE, Bauer, LeTourneau, etc.). </p><br><p> • Familiarity with CMS systems (PIMS, Omega). </p><br><p> • Offshore certification (BOSIET / HUET / OGUK / GWO) is an advantage. </p><br><p> • Strong leadership, HSE awareness, and cross-discipline coordination skills. </p><br><p> • Offshore mechanical system expertise. Knowledge of class and regulatory requirements. </p><br><p> • Leadership &amp; offshore coordination. </p><br><p> • Troubleshooting &amp; system integration. </p><br><p> • Vendor management &amp; documentation control. Strong HSE and operational mindset. </p><br> <p>Experience&nbsp;</p><br><p>• 12 years’ experience in Mechanical commissioning on new build &nbsp;offshore &nbsp;rigs. (Jack-up Rig)&nbsp;</p><br><p>&nbsp;Languages&nbsp;</p><br><p>• Excellent Communication Skills (oral and written) in the English.</p><br> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> No experience required </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

Job Summary<br><br>We are seeking a motivated and enthusiastic Fresh Graduate Mechanical Engineer to join our engineering team. The successful candidate will support senior engineers in the design, analysis, documentation, and execution of mechanical engineering activities across projects.<br><br>Key Responsibilities<br><br> Assist senior engineers in mechanical design, calculations, and technical studies. Support the preparation and review of drawings, specifications, and technical reports. Assist with HVAC, plumbing, firefighting, and other mechanical systems as required. Review project drawings and ensure compliance with project specifications and applicable standards. Support site inspections and monitor mechanical works when required. Coordinate with architectural, structural, electrical, and other engineering disciplines. Assist in preparing BOQs, material submittals, and technical documentation. Participate in meetings with project teams, contractors, and consultants. Maintain proper engineering records and project documentation. Follow company HSE, quality, and engineering procedures. Perform other duties assigned by the Mechanical Engineering Manager or Senior Engineer<br><br>Requirements<br><br>Qualifications<br><br> Bachelor's Degree in Mechanical Engineering from a recognized university. Fresh graduate or maximum 1 year of relevant experience. Strong knowledge of basic mechanical engineering principles. Good command of English, written and spoken. Good communication and teamwork skills. Ability to use Auto CAD; knowledge of Revit MEP or other engineering software is an advantage. Strong analytical and problem-solving abilities. Willingness to learn and develop professionally. Saudi Council of Engineers (SCE) registration, where applicable

House of Consulting Office for Consulting Engineers Co. (HCO) is a multi-disciplinary consulting engineering firm based in Saudi Arabia. We provide integrated architectural, engineering, planning, and consultancy services, offering a “one-stop solution” to support our clients across the full project lifecycle. Our portfolio spans residential, commercial, industrial, hospitality, retail, and healthcare sectors.<br>We are currently looking for a highly qualified Mechanical Inspector to join our team in Riyadh.<br>Key Responsibilities: Inspect and supervise mechanical works including HVAC, plumbing, firefighting, and drainage systems Ensure mechanical installations comply with approved drawings, specifications, and applicable standards Conduct inspections, testing, and commissioning activities for mechanical systems Verify materials and equipment delivered to site meet project requirements Monitor contractor performance and ensure quality workmanship Ensure compliance with local regulations, mechanical codes, and safety standards Prepare inspection reports and maintain accurate project records Identify non-conformance issues and coordinate corrective actions Coordinate with project engineers, consultants, and contractors on technical matters<br>Qualifications: Bachelor’s Degree in Mechanical Engineering or a related field Minimum 10 years of relevant experience in mechanical inspection and construction supervision Strong knowledge of HVAC, plumbing, firefighting systems, and testing & commissioning procedures Experience in large-scale construction projects Familiarity with Saudi codes and industry standards related to mechanical systems Excellent communication, coordination, and reporting skills Proficiency in Microsoft Office and inspection reporting systems

About the Client:Our client is a leading company in the railway industry, seeking an experienced Mechanical Technician to support railway maintenance and operational projects in Saudi Arabia.<br>About the Role:Perform preventive and corrective maintenance on mechanical systems to ensure the safe and reliable operation of railway systems.<br>Responsibilities:Perform preventive and corrective maintenance of mechanical systems and equipment. Carry out maintenance of MEP systems. Diagnose and repair mechanical faults. Conduct inspections and preventive maintenance activities. Comply with safety regulations and maintenance standards. Prepare maintenance reports and documentation.<br>Qualifications:Technical Diploma in Mechanical Engineering or a related field. Minimum 4 years of relevant experience. Experience in railway maintenance. Experience with MEP systems. Fluent in English.