Mechanical Drafts Man Jobs in Saudi

‏⁦المسمى الوظيفي: رسام هندسي (Draftsman)المهام والمسؤولياتإعداد الرسومات الهندسية التنفيذية والتفصيلية باستخدام برامج التصميم الهندسي مثل Auto CAD.تحويل المخططات والتصاميم الأولية إلى رسومات تنفيذية دقيقة وفق المعايير والمواصفات.مراجعة الرسومات والتأكد من دقتها وخلوها من الأخطاء قبل اعتمادها.إجراء التعديلات والتحديثات المطلوبة على الرسومات وفق توجيهات المهندسين.التنسيق مع فرق التصميم والتنفيذ لضمان توافق الرسومات مع متطلبات المشروع.إعداد جداول الكميات والتفاصيل الفنية المرتبطة بالرسومات عند الحاجة.تنظيم وأرشفة الرسومات والملفات الهندسية وتحديثها بشكل مستمر.الالتزام بمعايير الجودة والأنظمة الهندسية المعمول بها.المتطلباتدبلوم أو بكالوريوس في الهندسة المدنية أو المعمارية أو الميكانيكية أو تخصص ذي صلة.خبرة عملية لا تقل عن سنة (أو حسب متطلبات الشركة) في مجال الرسم الهندسي.إجادة استخدام برنامج Auto CAD بشكل احترافي، ويُفضل الإلمام ببرامج Revit أو Civil 3D أو Solid Works بحسب طبيعة العمل.القدرة على قراءة المخططات والمواصفات الفنية.معرفة جيدة بالكودات والمعايير الهندسية ذات الصلة.مهارات عالية في الدقة والانتباه للتفاصيل.القدرة على العمل ضمن فريق وإدارة الوقت والالتزام بالمواعيد.مهارات تواصل جيدة وحل المشكلات.<br><br>ارسال السيرة الذاتيه : ( HR@manartc.com)

<h2 ><span lang="ar" dir="rtl">اعلان شركة معادن عن وظيفة&nbsp;فني رئيسي - ميكانيكي (Lead Technician, Mechanical)</span></h2><h3 ><span lang="ar" dir="rtl">الغرض من الوظيفة</span></h3><p ><span lang="ar" dir="rtl">يتولى الفني الرئيسي - الميكانيكي قيادة وتنفيذ أنشطة الصيانة الميكانيكية في خطوط الدرفلة/التشطيب لضمان أعلى مستوى من الاعتمادية، السلامة، والأداء التشغيلي للمعدات.</span></p><p ><span lang="ar" dir="rtl">يركز الدور على تقليل الأعطال والتوقفات من خلال تطبيق الصيانة الوقائية والتنبؤية (PM/PdM)، والإشراف على فرق الصيانة والمقاولين، وضمان الالتزام بمعايير السلامة والجودة.</span></p><p ><span lang="ar" dir="rtl">كما يساهم في استكشاف الأعطال المعقدة، تخطيط أعمال الصيانة، وتحسين الأداء بشكل مستمر، مع توثيق جميع العمليات ودعم تحليل الأسباب الجذرية (RCA).</span></p><h3 ><span lang="ar" dir="rtl">المتطلبات</span></h3><ul><li><p ><span lang="ar" dir="rtl"><strong>المؤهل التعليمي:</strong> بكالوريوس هندسة ميكانيكية أو دبلوم هندسة ميكانيكية أو تدريب فني متخصص (Apprenticeship).</span></p></li><li><p ><span lang="ar" dir="rtl"><strong>الخبرة:</strong> أكثر من 12 سنة خبرة.</span></p></li><li><p ><span lang="ar" dir="rtl"><strong>المهارات التقنية:</strong> تنفيذ الصيانة الميكانيكية، تخطيط الأعمال، أنظمة CMMS، التحسين المستمر.</span></p></li><li><p ><span lang="ar" dir="rtl"><strong>أدوات العمل:</strong> CMMS، ERP، Microsoft Office، برامج الذكاء الاصطناعي.</span></p></li></ul><h3 ><span lang="ar" dir="rtl">المهارات والمسؤوليات التقنية</span></h3><ul><li><p ><span lang="ar" dir="rtl">قيادة تنفيذ الصيانة الميكانيكية خلال الأعطال والصيانة الوقائية لتقليل التوقفات.</span></p></li><li><p ><span lang="ar" dir="rtl">التأكد من الالتزام بإجراءات التصاريح (Permit) ونظام العزل (LOTO) والإشراف على المقاولين.</span></p></li><li><p ><span lang="ar" dir="rtl">توجيه الفنيين أثناء عمليات الإصلاح واستكشاف الأعطال.</span></p></li><li><p ><span lang="ar" dir="rtl">تنفيذ وتحسين برامج الصيانة الوقائية والتنبؤية وضمان جودتها.</span></p></li><li><p ><span lang="ar" dir="rtl">تخطيط أعمال الصيانة من خلال تحديد الموارد والأدوات وقطع الغيار.</span></p></li><li><p ><span lang="ar" dir="rtl">صيانة المعدات الميكانيكية (الثابتة والمتحركة والهيدروليكية والهوائية).</span></p></li><li><p ><span lang="ar" dir="rtl">تنفيذ أعمال دقيقة مثل المحاذاة والمعايرة والاتزان وتركيب المحامل.</span></p></li><li><p ><span lang="ar" dir="rtl">تحديد الأعطال المتكررة واقتراح التحسينات.</span></p></li><li><p ><span lang="ar" dir="rtl">التأكد من جاهزية معدات الرفع والسلامة وفحص الأدوات ووسائل الحماية الشخصية.</span></p></li><li><p ><span lang="ar" dir="rtl">توثيق جميع أعمال الصيانة في الأنظمة الإلكترونية (eAM) وإغلاق أوامر العمل.</span></p></li><li><p ><span lang="ar" dir="rtl">المشاركة في التحقيقات الفنية وتحليل الأسباب الجذرية للأعطال.</span></p></li><li><p ><span lang="ar" dir="rtl">الالتزام بمعايير 5S والنظافة الصناعية في بيئة العمل.</span></p></li></ul><h3 ><span lang="ar" dir="rtl">القطاعات ذات الصلة</span></h3><ul><li><p ><span lang="ar" dir="rtl">البتروكيماويات</span></p></li><li><p ><span lang="ar" dir="rtl">التصنيع</span></p></li><li><p ><span lang="ar" dir="rtl">الصهر (Smelting)</span></p></li><li><p ><span lang="ar" dir="rtl">إعادة التدوير</span></p></li><li><p ><span lang="ar" dir="rtl">الدرفلة (Rolling)</span></p></li><li><p ><span lang="ar" dir="rtl">الإنتاج الدفعي (Batch Production)</span></p></li></ul>

<p>Job Overview</p><p>We are seeking a detail-oriented MEP Draftsman to join our engineering team in Riyadh, Saudi Arabia. The ideal candidate will support the design and coordination of mechanical, electrical, and plumbing systems for diverse construction projects. This entry-level role offers a clear path for professional growth within a dynamic, multidisciplinary environment that values accuracy, collaboration, and timely deliverables.</p><p>Key Responsibilities and Duties</p><ul><li>Prepare accurate 2D and 3D MEP drawings, including coordination with architectural and structural models using BIM software (e.g., Revit) and CAD tools.</li><li>Develop construction drawings, shop drawings, and as-built records under supervisor guidance.</li><li>Assist in MEP coordination meetings, review design discrepancies, and implement resolution strategies.</li><li>Collaborate with design engineers to ensure compliance with applicable codes, standards, and project specifications.</li><li>Prepare material take-offs, technical sketches, and schematic diagrams as required.</li><li>Assist in reviewing submittals, shop drawings, and RFI responses for accuracy and completeness.</li><li>Maintain organized drawing libraries, version control, and documentation in accordance with company procedures.</li><li>Support field teams during construction by providing accurate drawings and timely revisions.</li></ul><p>Qualifications and Requirements</p><ul><li>2 to 5 years of related drafting experience in MEP within the Saudi market is preferred for advanced levels; strong potential for an ambitious beginner will be considered.</li><li>Proficiency with AutoCAD, Revit (MEP), and BIM workflows; familiarity with Navisworks is a plus.</li><li>Solid understanding of MEP systems, drawing standards, and Saudi/arabian codes and standards relevant to construction.</li><li>Strong attention to detail, numerical accuracy, and problem-solving abilities.</li><li>Good verbal and written communication skills in English; Arabic language proficiency is a plus.</li><li>Ability to work under supervision and as part of a multidisciplinary team, with good time-management skills and the ability to manage multiple tasks.</li></ul><p>Required Skills</p><ul><li>AutoCAD and Revit (MEP) proficiency</li><li>3D modeling and BIM coordination</li><li>Drafting standards and documentation control</li><li>Problem-solving and analytical thinking</li><li>Effective communication and teamwork</li><li>Attention to detail and accuracy</li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>We are hiring experienced drafting professionals to support the design and construction of a major FIFA stadium project in Saudi Arabia. The roles involve preparing detailed shop drawings, coordination drawings, and as-built documentation while ensuring compliance with project standards and supporting successful project delivery.</p><p><br></p><p><b>Open Positions</b></p><ul><li>Mechanical Draftsman</li><li>Electrical Draftsman</li><li>ELV Draftsman</li></ul><p><br></p><p><b>Key Responsibilities</b></p><ul><li>Prepare detailed shop drawings, coordination drawings, and as-built drawings.</li><li>Interpret engineering drawings, specifications, and project requirements.</li><li>Coordinate with engineers, BIM teams, and site personnel.</li><li>Update drawings based on consultant and site comments.</li><li>Support multidisciplinary coordination and clash resolution.</li><li>Ensure drawings comply with project specifications and quality standards.</li><li>Maintain drawing revisions and document control.</li><li>Deliver drawings within project schedules and deadlines.</li><li>Support successful project execution through accurate technical documentation.</li></ul><p><br></p><p><b>Qualifications &amp; Experience</b></p><ul><li><b>Years of experience:</b> Minimum 5 years of relevant hands-on drafting experience in Mechanical, Electrical, or ELV systems.</li><li><b>Education:</b> Diploma or Bachelor's degree in Mechanical Engineering, Electrical Engineering, Drafting, or a related discipline.</li><li><b>Industry exposure:</b> Experience in FIFA stadiums, sports facilities, airports, commercial buildings, or other large-scale MEP/ELV projects is highly preferred.</li><li>Strong proficiency in AutoCAD.</li><li>Experience preparing shop drawings, coordination drawings, and as-built drawings.</li><li>Revit/BIM experience is an advantage.</li><li>Good understanding of MEP and ELV coordination and construction documentation.</li><li>Strong attention to detail and ability to work within project deadlines.</li></ul><p><br></p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><ul><li>Mechanical Drafting</li><li>Electrical Drafting</li><li>ELV Systems</li><li>Shop Drawings</li><li>As-Built Drawings</li><li>MEP Coordination</li><li>Revit</li><li>BIM Coordination</li><li>Construction Documentation</li></ul></div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>We are currently looking for experienced and technically strong Electrical &amp;Mechanical Draftsmen to join our team in Riyadh, Saudi Arabia, supporting</p><p>major construction projects.</p><p><br></p><p>Key Responsibilities:</p><ul><li>Prepare detailed Shop Drawings, Coordination Drawings, and As-BuiltDrawings based on approved IFC drawings and project requirements.·</li><li>Develop detailed drawings, sections, layouts, and installation details for MEP systems.</li><li>Coordinate with MEP Engineers, Technical Teams, BIM Teams, and other disciplines to ensure proper coordination and avoid clashes.</li><li>Incorporate consultant/client comments and revise drawings accordingly.</li><li>Ensure drawings comply with project specifications, approved materials, relevant standards, and actual site conditions.</li><li>Support site teams with required technical drawings and modifications during construction.</li></ul> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p>Requirements:</p><ul><li>Minimum 7+ years of relevant experience as an MEP Draftsman.</li><li>Strong experience in large-scale construction projects.</li><li>Excellent proficiency in AutoCAD and related drafting software.</li><li>Good understanding of MEP coordination and construction requirements.</li><li>Ability to read and interpret IFC drawings, specifications, BOQ, and technical</li></ul><p>documents.</p><ul><li>Previous experience in Saudi Arabia / GCC projects is highly preferred.</li><li>Electrical Draftsman: Strong knowledge of MV/LV, Lighting, Power, ELV, FireAlarm, Earthing, and related electrical systems.</li><li>Mechanical Draftsman: Strong knowledge of HVAC, Plumbing, Drainage, Fire</li><li>Fighting, and related mechanical systems.</li></ul></div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Job Summary:</p> <p>&nbsp;</p> <ul> <li>To have enough knowledge to cope with technical difficulties to ensure smooth operation of the workshop.</li> </ul> <p>&nbsp;</p> <ul> <li>Responsible enough to lead a team of Mechanics and have the ability to pass that knowledge onto them.</li> </ul> <p>&nbsp;</p> <ul> <li>The duty of testing other mechanics work.</li> </ul> <p>&nbsp;</p> <p>&nbsp;</p> <p>Duties and Responsibilities:</p> <p>&nbsp;</p> <ul> <li>Train team of Mechanics and help when required.</li> </ul> <p>&nbsp;</p> <ul> <li>Work at the roadside when required.</li> </ul> <p>&nbsp;</p> <ul> <li>Update / maintain technical literature.</li> </ul> <p>&nbsp;</p> <ul> <li>Regularly checking the mechanics tools boxes.</li> </ul> <p>&nbsp;</p> <ul> <li>Keep his area clean and neat.</li> </ul> <p>&nbsp;</p> <ul> <li>Keep and maintain tools and company assets</li> </ul> <p>&nbsp;</p> <ul> <li>Take care of personal appearance.</li> </ul> <p>&nbsp;</p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p>&nbsp;</p> <p>Qualifications and Skills:</p> <p>&nbsp;</p> <ul> <li>High school diploma</li> </ul> <p>&nbsp;</p> <ul> <li>Recognised mechanical qualifications for commercial vehicles i.e. City and Guilds or equivalent Experience</li> </ul> <p>&nbsp;</p> <ul> <li>Minimum five years MAN experience as a technician</li> </ul> <p>&nbsp;</p> <ul> <li>Knowledge of electric's as well as mechanics</li> </ul> <p>&nbsp;</p> <ul> <li>Ability to lead and train</li> </ul> <p>&nbsp;</p></div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>As an experienced Draftsman with over 10 years in the field, you will be an integral part of our accounting firm, where your expertise in creating precise technical drawings will directly influence the success of our projects. This role is designed for seasoned professionals who understand the nuances of drafting and are eager to apply their knowledge in a collaborative, fast-paced environment. You will work alongside engineers and project managers, ensuring that all designs adhere to industry standards while meeting the specific needs of our clients.</p><p>Your extensive experience will not only enhance your drafting skills but also position you as a mentor within our team. We value the contributions of seasoned professionals and believe in fostering an environment that encourages knowledge sharing and continuous learning. You will have the opportunity to lead training sessions and share best practices, helping to elevate the skills of junior draftsmen and contributing to a culture of excellence.</p><p>In this strategic role, you will also have the chance to influence project outcomes significantly. Your insights and expertise will be invaluable in decision-making processes, and you will play a key role in shaping the future of our projects. This is an exceptional opportunity to leverage your experience to drive innovation and efficiency within our firm, paving the way for your career progression and leadership development.</p><p><b>Responsibilities:</b></p><ol><li>Utilize advanced CAD software to create detailed architectural and engineering drawings, ensuring high accuracy and compliance with industry standards to support project execution.</li><li>Collaborate with engineers and project managers to gather project requirements and translate them into comprehensive technical drawings that meet client specifications.</li><li>Review and revise technical drawings based on feedback from stakeholders, maintaining effective communication to ensure alignment with project goals.</li><li>Conduct site visits to collect data and assess project requirements, ensuring that designs reflect real-world conditions and constraints effectively.</li><li>Maintain organized documentation of all drafts and revisions, employing version control systems to track changes and document the evolution of each project accurately.</li><li>Assist in preparing project proposals by creating visual representations that clearly communicate project concepts to clients and stakeholders, enhancing their understanding and engagement.</li><li>Stay abreast of the latest drafting technologies and software advancements, integrating new tools into your workflow to improve productivity and efficiency continuously.</li><li>Participate actively in team meetings to discuss project progress and challenges, contributing innovative ideas and solutions to enhance overall project outcomes.</li><li>Provide mentorship and training to junior draftsmen, sharing your extensive knowledge and best practices to foster a culture of continuous learning within the team.</li></ol> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><ul><li>Expertise in CAD software such as AutoCAD or Revit, essential for creating high-quality technical drawings.</li><li>Strong attention to detail, ensuring all designs are precise and meet required specifications effectively.</li><li>Excellent communication skills, facilitating collaboration with engineers and project managers to achieve project goals.</li><li>Ability to interpret complex technical documents and specifications, translating them into actionable designs.</li><li>Exceptional time management skills, allowing you to prioritize tasks and meet tight project deadlines efficiently.</li><li>Advanced problem-solving abilities, crucial for addressing challenges that arise during the drafting process effectively.</li><li>Thorough knowledge of building codes and regulations, ensuring compliance in all technical drawings and designs.</li></ul></div>

Mechanical Maintenance and Repair Activities Perform planned preventive, predictive, corrective, and breakdown maintenance activities on assigned mechanical equipment Carry out daily inspections, running checks, and maintenance checklists in accordance with approved maintenance schedules Monitor the physical condition of equipment and report abnormalities, non-conformances, and developing defects to the Mechanical Maintenance Engineer Troubleshoot mechanical failures using approved tools, drawings, manuals, and diagnostic techniques to identify the cause and carry out necessary repairs Perform dismantling, inspection, cleaning, repair, replacement, reassembly, alignment, and functional testing of mechanical equipment and components Replace defective parts such as bearings, seals, gaskets, O-rings, gland packing, couplings, bolts, filters, strainers, belts, and lubrication-system components Perform adjustment, alignment, tightening, lubrication, greasing, oil top-up, oil changing, and cleaning activities in accordance with approved procedures Identify and report corrosion, cracks, leaks, overheating, vibration, abnormal noise, misalignment, loose bolts, damaged insulation, and other equipment defects Ensure the working area is clean, safe, and properly restored after completion of maintenance activities<br><br>v Support maintenance, inspection, and repair of mechanical equipment including, but not limited to:<br><br>Siemens 9000HL-Class gas turbine auxiliaries, including lube oil, hydraulic oil, fuel gas, inlet air, ventilation, and turning gear systems Steam turbine auxiliaries, including lube oil, gland steam, seal oil, condensate, cooling, and turning gear systems Heat Recovery Steam Generator (HRSG), including drums, valves, blowdown systems, expansion joints, and associated auxiliary equipment Pumps, including boiler feedwater pumps, condensate extraction pumps, closed cooling water pumps, service water pumps, fire water pumps, fuel oil pumps, chemical dosing pumps, and drainage pumps Compressors, blowers, fans, air handling units, ventilation fans, and instrument/service air compressor systems Valves, including gate, globe, check, control, safety Valves Water treatment, reverse osmosis, condensate polishing, chemical dosing, wastewater treatment, and other balance-of-plant mechanical equipment Inspection, Testing, and Troubleshooting Conduct routine inspections and condition assessments of assigned mechanical equipment Use approved maintenance and diagnostic tools such as vibration meters, infrared thermometers, laser alignment tools, dial gauges, feeler gauges, torque wrenches, pressure gauges, vernier calipers, and micrometers Assist in vibration monitoring, alignment checks, bearing inspections, pump performance checks, valve testing, pressure testing, leak testing, and functional testing Record inspection findings, test readings, equipment condition, defects identified, and maintenance work completed Assist in identifying the root cause of equipment failures and support implementation of corrective actions Monitor repeated failures and report recommendations for repair, modification, replacement, or maintenance-plan improvement Support basic welding, fabrication, and workshop repair activities Participate in planned shutdowns, major outages, overhauls, commissioning activities, warranty works, and emergency repairs Safety, Permit-to-Work, and Compliance Follow all applicable safety rules, permit-to-work requirements, lockout/tagout procedures, confined-space-entry requirements, lifting procedures, and site safety standards Verify that equipment is properly isolated, depressurized, drained, vented, cooled down, and released for maintenance before starting work Use required personal protective equipment, approved tools, lifting equipment, and safety devices at all times Participate in toolbox talks, risk assessments, safety observations, hazard reporting, audits, and incident investigations Immediately report unsafe conditions, leaks, damaged tools, lifting hazards, near misses, and incidents Follow environmental and waste-management requirements, including proper identification, handling, segregation, and disposal of waste materials Ensure maintenance work complies with approved site procedures, OEM requirements, quality standards, and EHS requirements Documentation and CMMS Support Complete maintenance checklists, inspection sheets, work completion records, test reports, and defect reports accurately Provide clear feedback to the Mechanical Maintenance Engineer regarding work completed, materials used, defects found, and follow-up actions required Support work-order completion, man-hour recording, and equipment-history updates in the CMMS Spare Parts, Tools, and Housekeeping Review assigned work orders and identify the required spare parts, consumables, tools, lifting equipment, and test instruments before starting work Check availability of spare parts and coordinate with the warehouse storekeeper for material collection and return Maintain mechanical hand tools, power tools, lifting tools, portable test instruments, and workshop equipment in good working condition Report shortages of spare parts, consumables, special tools, and defective equipment to the Mechanical Maintenance Engineer Maintain good housekeeping in workshops, equipment areas, stores, and maintenance locations Coordination, Training, and Continuous Improvement Work closely with Mechanical Maintenance Engineers, Operations personnel, Electrical and I&C teams, contractors, OEM representatives, and other site personnel Support Operations during equipment isolation, release for maintenance, testing, start-up, and return-to-service activities Assist other departments in troubleshooting and repair activities when required Support training and mentoring of junior technicians,, and newly joined maintenance personnel<br><br>Participate in continuous-improvement initiatives, maintenance improvement programs, 5S activities, and hazard-reporting programs.<br><br>Requirements<br><br>Education<br><br>Mechanical Diploma, Mechanical Technology, or an equivalent discipline Mechanical trade certifications is preferred Training in rigging, lifting operations, Forklift operator, and safety courses is an advantage<br><br>Experience<br><br>Minimum 5 years of mechanical maintenance experience in a power plant, heavy industrial facility, oil and gas plant, desalination plant, petrochemical plant. Combined cycle power plant experience is preferred<br><br>Technical Knowledge<br><br>Knowledge of mechanical systems used in combined cycle power plants Knowledge of gas turbines, steam turbines, HRSG systems, pumps, valves, compressors, fans, blowers, heat exchangers, filters, strainers, and piping systems Understanding of lube oil, hydraulic oil, fuel gas, fuel oil, cooling water, condensate, boiler feedwater, compressed air, and water-treatment systems Knowledge of rotating-equipment maintenance practices, including bearing inspection, lubrication, seal replacement, coupling alignment, and vibration awareness Familiarity with valve maintenance, including gland packing, seat leakage, Lapping, and basic valve overhaul activities Understanding of lifting and rigging, torque tightening, mechanical assembly, and use of lifting tools Knowledge of permit-to-work, lockout/tagout, confined-space entry, lifting operations, and general mechanical safety requirements<br><br>Practical Skills<br><br>Ability to use maintenance diagnostic tools such as vibration meters, infrared thermometers, pressure gauges, and tachometers Basic computer skills for CMMS andwork-order updates, maintenance records, and reporting Good working knowledge of written and spoken English Good communication, teamwork, and coordination skills Willingness to work during planned outages, emergency breakdowns, shift duties, and on-call assignments when required

Greenland Group. is looking for Flag Man - CHINA STATE, KSA<br>Job Description / Responsibility Core Duties Control Traffic: Use "STOP" and "SLOW" signs or bright flags to guide cars safely past road repairs. Guide Heavy Equipment: Signal crane operators and large trucks to park or move safely on busy work sites. Warn Drivers: Give drivers early warnings about road dangers or workers in the area. Protect Workers: Act as a visual guard to keep moving vehicles away from construction crews and pedestrians.<br>Educational Requirements HSCExperience Requirements2 to 6 year(s) The applicants should have experience in the following business area(s): Training Institutes, Overseas Companies, Group of Companies<br>Additional Requirements Common Skills Clear Communication: Uses standard hand gestures and simple body movements that drivers can easily understand. High Stamina: Can stand for long shifts outdoors in all types of weather. Fast Reflexes: Makes quick choices to stop cars if an emergency happens on the road.<br>Job Location Saudi Arabia Salary Tk. 47000 - 50000 (Monthly)

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Position Summary</p><p>The Parts Man is responsible for the physical handling, storage, picking, packing, and dispatch of genuine automotive parts within the dealership warehouse.</p><p>The role plays a critical part in maintaining inventory accuracy, supporting workshop efficiency, and ensuring timely parts availability for service operations, retail customers, and inter-branch requirements. By managing warehouse discipline, safe handling practices, and accurate stock movement, the Parts Man directly contributes to workshop productivity, customer satisfaction, and overall aftersales performance.</p><p>A highly disciplined, accurate, and physically active team member is essential to maintaining warehouse standards and ensuring the safe handling of high-value, fragile, and high-voltage (HV) components.</p><p>Key Responsibilities</p><p>Goods Receipt &amp; Storage</p><p>• Receive incoming parts shipments and verify quantities, part numbers, and condition against purchase orders and delivery notes</p><p>• Identify and report discrepancies, shortages, damaged goods, or incorrect deliveries to the Parts Supervisor immediately</p><p>• Bin parts accurately into designated storage locations using FIFO principles and OEM storage requirements</p><p>• Ensure proper storage conditions for fragile parts, fluids, batteries, tyres, lubricants, and hazardous materials in accordance with safety standards</p><p>• Handle high-voltage (HV) battery components and sensitive parts using approved safety procedures and protective equipment</p><p>Picking, Packing &amp; Dispatch</p><p>• Pick parts accurately for workshop Repair Orders, retail customer sales, body shop requirements, and inter-branch transfers using issued pick lists</p><p>• Verify picked quantities and part numbers before dispatch to minimize workshop delays and customer complaints</p><p>• Package parts securely for transportation, ensuring special care for fragile, oversized, or high-value items</p><p>• Dispatch parts to internal departments, external customers, and branch locations on time while maintaining delivery documentation and proof of dispatch</p><p>• Support urgent workshop requirements to minimize vehicle downtime and service delays</p><p>Stock Accuracy &amp; Warehouse Control</p><p>• Conduct daily cycle counts and support scheduled stock takes to maintain high inventory accuracy and traceability</p><p>• Monitor stock condition and report damaged, expired, obsolete, or slow-moving inventory to the Parts Supervisor for corrective action</p><p>• Ensure correct stock rotation and minimize stock losses, shrinkage, and binning errors</p><p>• Maintain proper labeling, bin location accuracy, and warehouse organization across all storage areas</p><p>Housekeeping, Safety &amp; Compliance</p><p>• Maintain warehouse cleanliness, organization, and 5S standards across all aisles, shelves, and storage locations</p><p>• Operate forklifts, pallet jacks, trolleys, and warehouse handling equipment safely and within certification guidelines</p><p>• Follow all HSE procedures including safe lifting, PPE usage, chemical handling, and hazardous goods protocols</p><p>• Ensure compliance with OEM standards, customs regulations, audit requirements, and internal controls related to parts traceability and inventory management</p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p>Educational Requirements</p><p>• High School Certificate or Vocational Diploma</p><p>• Certification in Logistics, Warehouse Operations, or Supply Chain is considered an advantage</p><p>• Forklift certification is highly preferred</p><p>Experience Requirements</p><p>• Minimum 1–3 years of experience in a parts warehouse, automotive dealership, or logistics environment</p><p>• Previous experience handling genuine automotive spare parts is strongly preferred</p><p>• Experience with warehouse operations in high-volume dealership environments is considered an advantage</p><p>Technical Skills</p><p>• Working knowledge of warehouse management modules within DMS, ERP, or WMS platforms</p><p>• Familiarity with barcode scanning systems, stock movement processes, and warehouse documentation</p><p>• Ability to read and verify part numbers, pick lists, shipping documents, and stock transfer requests accurately</p><p>• Basic computer literacy for stock entry, goods receipt confirmation, and inventory reporting</p><p>• Basic Arabic and English reading and writing skills for warehouse operations and documentation</p></div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>1. Mechanical Maintenance and Repair Activities Perform planned preventive, predictive, corrective, and breakdown maintenance activities on assigned mechanical equipment.<br> Carry out daily inspections, running checks, and maintenance checklists in accordance with approved maintenance schedules.<br> Monitor the physical condition of equipment and report abnormalities, non-conformances, and developing defects to the Mechanical Maintenance Engineer.<br> Troubleshoot mechanical failures using approved tools, drawings, manuals, and diagnostic techniques to identify the cause and carry out necessary repairs.<br> Perform dismantling, inspection, cleaning, repair, replacement, reassembly, alignment, and functional testing of mechanical equipment and components.<br> Replace defective parts such as bearings, seals, gaskets, O-rings, gland packing, couplings, bolts, filters, strainers, belts, and lubrication-system components.<br> Perform adjustment, alignment, tightening, lubrication, greasing, oil top-up, oil changing, and cleaning activities in accordance with approved procedures.<br> Identify and report corrosion, cracks, leaks, overheating, vibration, abnormal noise, misalignment, loose bolts, damaged insulation, and other equipment defects.<br> Ensure the working area is clean, safe, and properly restored after completion of maintenance activities.<br> v Support maintenance, inspection, and repair of mechanical equipment including, but not limited to: Siemens 9000HL-Class gas turbine auxiliaries, including lube oil, hydraulic oil, fuel gas, inlet air, ventilation, and turning gear systems.<br> Steam turbine auxiliaries, including lube oil, gland steam, seal oil, condensate, cooling, and turning gear systems.<br> Heat Recovery Steam Generator (HRSG), including drums, valves, blowdown systems, expansion joints, and associated auxiliary equipment.<br> Pumps, including boiler feedwater pumps, condensate extraction pumps, closed cooling water pumps, service water pumps, fire water pumps, fuel oil pumps, chemical dosing pumps, and drainage pumps.<br> Compressors, blowers, fans, air handling units, ventilation fans, and instrument/service air compressor systems.<br> Valves, including gate, globe, check, control, safety Valves.<br> Water treatment, reverse osmosis, condensate polishing, chemical dosing, wastewater treatment, and other balance-of-plant mechanical equipment.<br> 2. Inspection, Testing, and Troubleshooting Conduct routine inspections and condition assessments of assigned mechanical equipment.<br> Use approved maintenance and diagnostic tools such as vibration meters, infrared thermometers, laser alignment tools, dial gauges, feeler gauges, torque wrenches, pressure gauges, vernier calipers, and micrometers.<br> Assist in vibration monitoring, alignment checks, bearing inspections, pump performance checks, valve testing, pressure testing, leak testing, and functional testing.<br> Record inspection findings, test readings, equipment condition, defects identified, and maintenance work completed.<br> Assist in identifying the root cause of equipment failures and support implementation of corrective actions.<br> Monitor repeated failures and report recommendations for repair, modification, replacement, or maintenance-plan improvement.<br> Support basic welding, fabrication, and workshop repair activities.<br> Participate in planned shutdowns, major outages, overhauls, commissioning activities, warranty works, and emergency repairs.<br> 3. Safety, Permit-to-Work, and Compliance Follow all applicable safety rules, permit-to-work requirements, lockout/tagout procedures, confined-space-entry requirements, lifting procedures, and site safety standards.<br> Verify that equipment is properly isolated, depressurized, drained, vented, cooled down, and released for maintenance before starting work.<br> Use required personal protective equipment, approved tools, lifting equipment, and safety devices at all times.<br> Participate in toolbox talks, risk assessments, safety observations, hazard reporting, audits, and incident investigations.<br> Immediately report unsafe conditions, leaks, damaged tools, lifting hazards, near misses, and incidents.<br> Follow environmental and waste-management requirements, including proper identification, handling, segregation, and disposal of waste materials.<br> Ensure maintenance work complies with approved site procedures, OEM requirements, quality standards, and EHS requirements.<br> 4. Documentation and CMMS Support Complete maintenance checklists, inspection sheets, work completion records, test reports, and defect reports accurately.<br> Provide clear feedback to the Mechanical Maintenance Engineer regarding work completed, materials used, defects found, and follow-up actions required.<br> Support work-order completion, man-hour recording, and equipment-history updates in the CMMS.<br> 5. Spare Parts, Tools, and Housekeeping Review assigned work orders and identify the required spare parts, consumables, tools, lifting equipment, and test instruments before starting work.<br> Check availability of spare parts and coordinate with the warehouse storekeeper for material collection and return.<br> Maintain mechanical hand tools, power tools, lifting tools, portable test instruments, and workshop equipment in good working condition.<br> Report shortages of spare parts, consumables, special tools, and defective equipment to the Mechanical Maintenance Engineer.<br> Maintain good housekeeping in workshops, equipment areas, stores, and maintenance locations.<br> 6. Coordination, Training, and Continuous Improvement Work closely with Mechanical Maintenance Engineers, Operations personnel, Electrical and I&amp;C teams, contractors, OEM representatives, and other site personnel.<br> Support Operations during equipment isolation, release for maintenance, testing, start-up, and return-to-service activities.<br> Assist other departments in troubleshooting and repair activities when required.<br> Support training and mentoring of junior technicians,, and newly joined maintenance personnel.<br> Participate in continuous-improvement initiatives, maintenance improvement programs, 5S activities, and hazard-reporting programs.<br> Education Mechanical Diploma, Mechanical Technology, or an equivalent discipline.<br> Mechanical trade certifications is preferred.<br> Training in rigging, lifting operations, Forklift operator, and safety courses is an advantage.<br> Experience Minimum 5 years of mechanical maintenance experience in a power plant, heavy industrial facility, oil and gas plant, desalination plant, petrochemical plant.<br> Combined cycle power plant experience is preferred.<br> Technical Knowledge Knowledge of mechanical systems used in combined cycle power plants.<br> Knowledge of gas turbines, steam turbines, HRSG systems, pumps, valves, compressors, fans, blowers, heat exchangers, filters, strainers, and piping systems.<br> Understanding of lube oil, hydraulic oil, fuel gas, fuel oil, cooling water, condensate, boiler feedwater, compressed air, and water-treatment systems.<br> Knowledge of rotating-equipment maintenance practices, including bearing inspection, lubrication, seal replacement, coupling alignment, and vibration awareness.<br> Familiarity with valve maintenance, including gland packing, seat leakage, Lapping, and basic valve overhaul activities.<br> Understanding of lifting and rigging, torque tightening, mechanical assembly, and use of lifting tools.<br> Knowledge of permit-to-work, lockout/tagout, confined-space entry, lifting operations, and general mechanical safety requirements.<br> Practical Skills Ability to use maintenance diagnostic tools such as vibration meters, infrared thermometers, pressure gauges, and tachometers.<br> Basic computer skills for CMMS andwork-order updates, maintenance records, and reporting.<br> Good working knowledge of written and spoken English.<br> Good communication, teamwork, and coordination skills.<br> Willingness to work during planned outages, emergency breakdowns, shift duties, and on-call assignments when required</span> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> No experience required </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Wood is currently seeking a Mechanical Engineer to support our Projects business. The project site is located approximately 150 km from Riyadh, Saudi Arabia.<br> &nbsp;</p><br><p><strong>What we can offer</strong></p><br><ul> <li><strong>Medical Insurance&nbsp;</strong>-&nbsp;Ensures specialist care is available to you and eligible family members residing in country. Pre-existing medical conditions are covered. No limit on number of children covered under the policy however age and coverage limits apply in line with KSA CCHI rules. Option to select higher medical cover payable at employees own expense.</li> <li><strong>Employee Assistance Programme&nbsp;-&nbsp;</strong>Allows you to feel comfortable knowing that you or your immediate family members can confidentially discuss any work or personal issues that are an inevitable part of life. The program helps support your mental, physical, social &amp; financial well-being.</li> <li><strong>GOSI (Social Insurance)&nbsp;-&nbsp;</strong>Payable to KSA employees, social insurance contributions are paid by the company in line with Government legislation to cover occupational hazards.</li> <li><strong>End of Service Gratuity&nbsp;-&nbsp;</strong>In line with KSA Labour Law, all employees are eligible for an End of Service benefit.</li> <li><strong>Examination Leave&nbsp;-&nbsp;</strong>Upon company approval to enroll in an education institute or to continue within such institution, employees have the right to fully paid leave to sit for an examination of an unrepeated year. Leave duration is based on the days of actual examination and must be applied for no less than fifteen days prior exam</li> <li><strong>Professional Memberships -&nbsp;</strong>One professional membership, registration, subscription, certification and/or license cost per annum for all active Wood employees. The membership must be relevant to the role you are currently employed in or be part of a development plan. Reimbursement should be claimed via the expenses procedure system, with supporting evidence.</li> <li><strong>Inspire Awards -&nbsp;</strong>Our annual awards programme is all about recognising and celebrating our inspirational colleagues – those designing the future, upholding our values and playing a pivotal role in delivering our strategy. Employees can recognise those who inspire them and make their day by nominating them for their hard work, innovation and tenacity.</li> <li><strong>Long Service Award&nbsp;-&nbsp;</strong>Wood values the commitment and loyalty of our people. Celebrating Long Service provides an opportunity for the business to demonstrate their appreciation of the hard work, dedication and many years’ service of our employees at 5-year service milestones.</li> <li><strong>Career Development Champions&nbsp;-&nbsp;</strong>Prioritizes structured growth through goal setting and resource utilization. Employees use tools for planning and feedback, with managers actively coaching and mentoring to support advancement. Continuous learning and development are emphasized to help employees achieve their career goals effectively.</li></ul><br> Wood is a global leader in consulting, engineering and operations for the energy and materials sectors. With 33,000 people in around 50 countries, Wood supports clients across the full asset lifecycle, delivering safe, predictable outcomes while enabling resilient operations and a lower carbon future. Wood forms the Energy &amp; Materials pillar of Sidara - a global partnership uniting leading multidisciplinary engineering, design, and project management companies. www.woodgroup.com<br> <b>Diversity Statement&nbsp;</b><br> We are an equal opportunity employer that recognises the value of a diverse workforce. All suitably qualified applicants will receive consideration for employment on the basis of objective criteria and without regard to the following (which is a non-exhaustive list): race, colour, age, religion, gender, national origin, disability, sexual orientation, gender identity, protected veteran status, or other characteristics in accordance with the relevant governing laws.<br><br>Responsibilities:<br><p><span><strong>Responsibilities&nbsp;</strong></span></p><br><ul> <li>Originate new and revise existing engineering deliverables.</li> <li>Revise and check engineering deliverables against company procedures, standards, and checklists.</li> <li>Support in Planning and completion of work within allocated man-hours effectively and plan work to avoid slippage.</li> <li>support in Interfaces, coordinates and communicate effectively with the Project Manager and other team members.</li> <li>Coordinates with all disciplines (as necessary) in the preparation and development of the deliverables and ensure that other disciplines input are incorporated.</li> <li>Go for site visits and verify site conditions and markup drawings/perform as-built activities.</li> <li>Manage deliverables submission with required quality checks and proper management of record.</li> <li>Technical report writing and preparation of presentations.</li> <li>Full knowledge of Aramco, Sabic standards.&nbsp; &nbsp;</li> <li>Technical bid evaluation, Vendor document review and subcontract scope management.</li></ul><br>Qualifications:<br><p><strong>What makes you remarkable</strong></p><br><p>At Wood, we are committed to equal opportunities and welcome all talented individuals to consider joining our team. If you don’t meet every requirement listed, but believe you have relevant experience, knowledge, or transferable skills, we encourage you to apply.</p><br><p>Some roles may include mandatory qualifications or legislative requirements that cannot be adjusted. Where this applies, these criteria will be clearly highlighted. For all other aspects of the role, we are open to considering a wide range of backgrounds and experiences. It will take all of us working together to deliver solutions to the world’s most critical challenges.</p><br><p><strong>Qualifications&nbsp;</strong></p><br><ul> <li>Bachelor’s Degree in <strong>Mechanical Engineering</strong> or <strong>Chemical Engineering</strong>.</li> <li>Minimum 5 years of relevant experience.</li> <li>Experience in the oil &amp; gas, hydrocarbon, refinery, offshore, or infrastructure industries.</li> <li>Proven experience in mechanical inspection activities.</li> <li>Working knowledge of ASME (Sections I, V, VIII, IX), ANSI B31.3/4/8, NACE, API 620/650, and AWS D1.1 standards.</li> <li>Experience using inspection and testing equipment, including Positive Material Identification (PMI) equipment.</li> <li>Ability to inspect pipes, piping systems, fittings, valves, structural steel, fasteners, and other mechanical materials.</li> <li>Strong understanding of QA/QC requirements, inspection procedures, and industry best practices.</li></ul> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> No experience required </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

Mechanical Technician – After Sales (Power Generation) Location: Jeddah, Saudi Arabia Job Summary We are seeking an experienced Mechanical Technician to join our After Sales team in Jeddah, Saudi Arabia. The successful candidate will be responsible for the installation, commissioning, preventive maintenance, troubleshooting, and repair of diesel generator mechanical systems (Gensets) at customer sites, ensuring reliable operation and high levels of customer satisfaction. Key Responsibilities Perform preventive and corrective mechanical maintenance on diesel generators (Gensets). Diagnose and troubleshoot mechanical faults in diesel engines and associated generator systems. Carry out generator installation, commissioning, testing, and startup activities. Inspect, repair, and replace mechanical components such as cooling systems, fuel systems, lubrication systems, belts, hoses, pumps, and engine parts. Read and interpret mechanical drawings, technical manuals, and service documentation. Use mechanical tools and diagnostic equipment to identify and resolve faults. Prepare service reports and maintenance documentation after each site visit. Ensure compliance with company safety policies and quality standards. Provide technical support and maintenance recommendations to customers. Travel to customer sites within the region as required. Requirements Diploma or Technical Certificate in Mechanical Engineering, Mechanical Technology, or a related field. Minimum 3 years of experience in the maintenance and troubleshooting of diesel generators (Gensets). Strong knowledge of diesel engines, cooling systems, fuel systems, lubrication systems, and generator mechanical components. Ability to read and interpret mechanical drawings and technical manuals. Hands-on experience using mechanical tools and diagnostic equipment. Good communication and customer service skills. Basic English communication skills. Valid driving licence is preferred. Willingness to work overtime and on weekends when required

Job Title: Junior Mechanical Engineer Job Location: Saudi Arabia<br>Role Purpose:The Junior Mechanical Engineer supports the delivery of mechanical works by assisting in the review, coordination, and implementation of design and construction activities on site. Working under the guidance of the Senior Mechanical Engineer and reporting to the Design Manager, the role contributes to shop drawing reviews, site inspections, technical documentation, and multidisciplinary coordination to ensure works are executed in accordance with approved drawings, specifications, and project requirements. The role is primarily site-focused, with responsibility for resolving day-to-day construction issues and supporting technical workflows. As part of this, the Mechanical Engineer is expected to actively contribute to drafting, detailing, and preparation of sketches, mark-ups, and redline drawings using CAD/BIM tools where required (e.g., routing adjustments, coordination fixes, temporary works), ensuring timely and practical solutions without over-reliance on dedicated drafting resources.<br>Key Accountabilities Key Activities Design, Site & Construction Support (Mechanical) Provide day-to-day mechanical engineering support on site, addressing construction queries, RFIs, and technical clarifications. Review mechanical works (HVAC, plumbing, fire protection, etc.) to verify compliance with approved drawings and specifications. Identify mechanical site issues, discrepancies, or non-conformances and report to the Senior Mechanical Engineer. Coordinate mechanical activities with structural, architectural, electrical, and fit-out works to avoid clashes and execution conflicts. Support inspections, testing, and commissioning activities for mechanical systems. Prepare and update sketches, mark-ups, and simple mechanical drawings/details using CAD tools to support site execution. Assist in producing redline drawings and as-built markups based on actual site conditions. Provide hands-on drafting support (Auto CAD/Revit/BIM tools) when required to resolve site issues efficiently. Ensure all issued sketches and drawings are clear, coordinated, and aligned with approved design intent. Shop Drawings, Submittals & As-Built Support Review mechanical shop drawings, material submittals, and method statements under supervision. Ensure compliance with design intent, specifications, and project standards. Assist in preparing technical comments and tracking submittal status. Verify that approved shop drawings and materials are properly implemented on site. Support preparation and validation of mechanical as-built drawings and documentation. Technical Queries, RFIs & NCR Management Assist in preparing responses to RFIs, Technical Queries (TQs), and site clarifications. Support investigation and close-out of NCRs, observations, and quality issues. Coordinate with the Senior Mechanical Engineer to resolve technical and coordination issues. Maintain records of technical correspondence and site decisions. Coordination & Communication Coordinate with site engineers, subcontractors, and suppliers on mechanical matters. Interface with other disciplines (Architectural, Structural, Electrical, etc.) for coordinated delivery. Attend coordination meetings and provide updates to senior team members. Ensure proper use of document control systems and project workflows. Continuous Improvement & Knowledge Sharing Develop knowledge of mechanical systems, installation practices, and coordination processes. Support lessons learned and continuous improvement initiatives. Seek guidance from senior engineers and contribute to team knowledge sharing. Promote best practices in mechanical construction quality and execution. JOB SPECIFICATIONSIndustry / Domain Design & Build engineering projects within the construction industry Multidisciplinary coordination across design and site delivery stages Mechanical systems implementation including HVAC, plumbing, and fire protection systems Necessary Knowledge and Experience Minimum 4–7 years of relevant experience in mechanical engineering within construction or design-build environments Experience in reviewing drawings, submittals, and supporting site execution Basic understanding of HVAC, plumbing, and fire protection systems Familiarity with multidisciplinary coordination and construction workflows Good command of English (written and spoken) Education and Certification Minimum Requirements Bachelor’s degree in Mechanical Engineering Professional certification is an advantage but not mandatory Job Specific and Technical Skills Working knowledge of Auto CAD, Revit, and BIM tools Ability to interpret and review mechanical drawings and specifications Basic understanding of installation, testing, and commissioning processes Ability to produce basic drawings, sketches, and redlines when required to support site delivery Good organizational and documentation skills Strong attention to detail and problem-solving ability

Role:The candidate will perform hands-on maintenance duties of a heavy-duty military mechanical system (RSADF) including preventive and corrective maintenance and repairs on hydraulic, brake, and air conditioning systems. Moreover, the candidate will maintain machinery and mechanical equipment in accordance with diagrams, drawings, operational manuals, and manufacturer’s specifications using hand tools and precision measuring and testing instruments. Inspect, replace, repair engine components as required.<br>Qualifications: Diploma in Mechanical Engineering. Minimum 4 years working experience as mechanical technician. Excellent knowledge of mechanical systems and engine operation is required. Very Good understanding of mechanical drawings, mechanical troubleshooting, interface between different objects and systems. Proficiency in Microsoft Office. Proficiency in English, spoken and written.

Esnad Contracting Company is looking for a Mechanical QC Supervisor to join our infrastructure project in Jeddah, Saudi Arabia.<br>Key Responsibilities Supervise mechanical quality control activities for piping, HVAC, firefighting, plumbing, pumps, valves, and mechanical equipment installation. Ensure all mechanical works comply with approved drawings, project specifications, Method Statements, ITPs, and applicable codes and standards. Coordinate inspections with construction teams, subcontractors, consultants, clients, and third-party inspectors. Review and inspect incoming mechanical materials and equipment to ensure compliance with approved submittals and project requirements. Monitor and witness mechanical testing activities, including hydrostatic testing, pressure testing, NDT, flushing, equipment alignment, and pre-commissioning. Identify non-conformities (NCRs), follow up on corrective actions, and maintain accurate quality documentation and inspection records.<br>Requirements Diploma or Bachelor's Degree in Mechanical Engineering. Minimum 5 years of experience in Mechanical QC within construction or infrastructure projects. Strong knowledge of mechanical systems, piping, welding inspections, testing procedures, and QA/QC documentation. Familiarity with WIRs, MIRs, ITPs, Method Statements, and NCR management. Professional certifications such as CSWIP, AWS, ASNT/NDT, or API are preferred. Previous experience in Saudi Aramco, NEOM, SABIC, or Royal Commission projects is preferred.

Esnad Contracting Company is looking for a Mechanical QC Supervisor to join our infrastructure project in Jeddah, Saudi Arabia.<br>Key Responsibilities Supervise mechanical quality control activities for piping, HVAC, firefighting, plumbing, pumps, valves, and mechanical equipment installation. Ensure all mechanical works comply with approved drawings, project specifications, Method Statements, ITPs, and applicable codes and standards. Coordinate inspections with construction teams, subcontractors, consultants, clients, and third-party inspectors. Review and inspect incoming mechanical materials and equipment to ensure compliance with approved submittals and project requirements. Monitor and witness mechanical testing activities, including hydrostatic testing, pressure testing, NDT, flushing, equipment alignment, and pre-commissioning. Identify non-conformities (NCRs), follow up on corrective actions, and maintain accurate quality documentation and inspection records.<br>Requirements Diploma or Bachelor's Degree in Mechanical Engineering. Minimum 5 years of experience in Mechanical QC within construction or infrastructure projects. Strong knowledge of mechanical systems, piping, welding inspections, testing procedures, and QA/QC documentation. Familiarity with WIRs, MIRs, ITPs, Method Statements, and NCR management. Professional certifications such as CSWIP, AWS, ASNT/NDT, or API are preferred. Previous experience in Saudi Aramco, NEOM, SABIC, or Royal Commission projects is preferred.

Job description:<br>Job Title: Mechanical Foreman<br>Location: Saudi Arabia<br>Experience Required: 4–5 Years<br>Availability: Immediate Joining<br>Job Description:<br>We are looking for an experienced Mechanical Foreman with 4–5 years of hands-on experience in mechanical construction projects. The ideal candidate must be currently residing in Saudi Arabia and available for immediate joining.<br>Key Responsibilities:<br>Supervise and coordinate daily mechanical site activities. Lead and monitor mechanical technicians and skilled workers to ensure work is completed safely and efficiently. Ensure all mechanical installations are carried out according to approved drawings, specifications, and project schedules. Coordinate with site engineers, subcontractors, and other trades to maintain smooth project execution. Monitor work quality and ensure compliance with safety regulations and company standards. Report daily progress, manpower, and material requirements to the Site Engineer. Identify and resolve on-site issues to minimize delays. Assist with testing, commissioning, and handover of mechanical systems. Requirements:<br>Diploma or Technical Certificate in Mechanical Engineering or a related field.4–5 years of experience as a Mechanical Foreman in construction projects. Currently based in Saudi Arabia. Available for immediate joining. Strong knowledge of HVAC, Plumbing, and firefighting systems. Good leadership, communication, and problem-solving skills. Ability to read and interpret mechanical drawings and coordinate site activities effectively. Valid transferable Iqama is preferred.

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>HanmiGlobal Saudi is seeking a detail-oriented Mechanical Inspector to oversee mechanical installation works and ensure conformance with project specifications, quality standards, and safety requirements.<br> The Mechanical Inspector will be responsible for conducting inspections, identifying defects, and ensuring high-quality execution of mechanical systems on site.<br> Key Responsibilities Conduct inspections of mechanical installations including HVAC, piping, and equipment to ensure compliance with approved drawings and specifications.<br> Monitor contractor work to verify adherence to quality, safety, and project requirements.<br> Identify, document and report non-conformities and recommend corrective actions.<br> Coordinate with engineering and project teams to resolve issues and ensure smooth workflow.<br> Maintain accurate inspection records, prepare reports and update quality documentation.<br> Participate in testing, commissioning and final acceptance of mechanical systems.<br> Ensure compliance with health, safety, and environmental regulations on site.<br> Bachelor's degree or diploma in Mechanical Engineering or related technical field.<br> Minimum of 7 years of experience in mechanical inspection within construction or engineering projects.<br> Strong knowledge of mechanical systems, codes, standards, and inspection procedures.<br> Ability to read and interpret engineering drawings and technical documents.<br> Excellent attention to detail and problem-solving skills.<br> Good communication and reporting abilities.<br> Familiarity with quality management systems and safety regulations.<br></span> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> No experience required </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

Role Description: We are looking for a qualified Mechanical Technician to join our team. He will perform routine and preventive maintenance on mechanical equipment and systems, ensuring reliable and efficient operation. Day-to-day tasks include inspecting machinery, diagnosing mechanical issues, performing repairs and adjustments, and replacing parts as needed. <br>Requirements:* Diploma in General Mechanical Engineering (Mandatory).* Ability to perform mechanical maintenance and troubleshoot equipment.* Strong problem-solving skills and attention to detail.* Ability to work effectively in a team environment.* Commitment to safety and company procedures.<br>Key Responsibilities:* Perform preventive and corrective mechanical maintenance.* Inspect, diagnose, and repair mechanical equipment.* Ensure compliance with safety and quality standards.* Maintain accurate maintenance records and reports.