Machine operator Jobs

<ul><li><p>Read and interpret fabrication drawings, shop drawings, dimensions, material specifications and basic welding symbols.</p></li><li><p>Independently handle fabrication jobs from drawing review through final completion.</p></li><li><p>Plan the fabrication sequence and identify the required materials, tools and manpower.</p></li><li><p>Perform material measuring, marking, cutting, fitting, alignment and assembly.</p></li><li><p>Fabricate structural steel, storage tanks, skids, platforms, frames, supports and other industrial steel components.</p></li><li><p>Verify dimensions, angles, diagonals, levels, alignment and fabrication tolerances throughout the work.</p></li><li><p>Coordinate with welders, machine operators and helpers to complete each job correctly and on time.</p></li><li><p>Guide and supervise helpers when required.</p></li><li><p>Identify drawing discrepancies, missing dimensions or fabrication problems before starting the work and report them to the supervisor.</p></li><li><p>Inspect completed work to ensure compliance with approved drawings and required quality standards.</p></li><li><p>Minimize material waste and avoid rework by maintaining accuracy during fabrication.</p></li><li><p>Follow all workshop safety procedures and ensure proper use of fabrication tools and equipment.</p></li><li><p>Maintain responsibility for the assigned job until it is completed and accepted by the supervisor or quality team.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Minimum 7 years of practical experience as a Steel Fabricator or Senior Fabricator in a steel fabrication workshop.</p></li><li><p>Strong ability to independently read and understand fabrication drawings, shop drawings, dimensions, material specifications and basic welding symbols.</p></li><li><p>Hands-on experience in structural steel and heavy industrial fabrication.</p></li><li><p>Experience in fabricating storage tanks, skid packages, platforms, frames, pipe supports and other steel components is preferred.</p></li><li><p>Skilled in measuring, material marking, cutting, fitting, alignment and assembly.</p></li><li><p>Able to receive a fabrication drawing, plan the work and complete the job with minimal supervision.</p></li><li><p>Good knowledge of fabrication tolerances, levels, angles, diagonals and dimensional inspection.</p></li><li><p>Able to use measuring tools and common fabrication workshop equipment correctly.</p></li><li><p>Capable of coordinating with welders, machine operators and helpers and supervising a small team when required.</p></li><li><p>Responsible, accurate, safety-conscious and committed to completing work according to drawings and quality requirements.</p></li><li><p>ITI, technical diploma or equivalent trade qualification is preferred.</p></li><li><p>Candidates currently available in Saudi Arabia with a transferable Iqama are preferred.</p></li><li><p>Applicants must be willing to complete a practical fabrication and drawing-reading trade test before final selection.</p></li></ul>

Senior AI Engineer Location: Riyadh, Saudi Arabia<br>We have an exciting opportunity for a Senior AI Engineer to join our growing technology team. We are looking for experienced professionals from Egypt, Jordan, Palestine, Lebanon, and Syria with strong expertise in Generative AI, Large Language Models (LLMs), AI agents, and scalable AI application development.<br>Roles & Responsibilities Design, develop, and deploy AI-powered applications using modern machine learning and Generative AI technologies. Build, fine-tune, and optimize Large Language Models (LLMs) and multimodal AI solutions. Develop AI agents and agentic workflows for business automation and intelligent decision-making. Implement Retrieval-Augmented Generation (RAG) pipelines using vector databases and knowledge retrieval frameworks. Design and integrate AI solutions with enterprise applications, APIs, and cloud platforms. Build scalable backend services and AI microservices for production environments. Develop prompt engineering strategies to improve AI model performance and response quality. Collaborate with product managers, software engineers, and business stakeholders to define AI use cases and deliver innovative solutions.

Hireaxies Careers is looking for Cashier<br>Job Description / Responsibilityচাকরির বিবরণ:সৌদি আরবের স্বনামধন্য সার্ভিস স্টেশন ও রিটেইল প্রতিষ্ঠান SASCO বাংলাদেশ থেকে দক্ষ ও দায়িত্বশীল ক্যাশিয়ার নিয়োগ দিচ্ছে। আন্তর্জাতিক মানের প্রতিষ্ঠানে কাজের মাধ্যমে ক্যারিয়ার গড়ার এটি একটি চমৎকার সুযোগ।<br>দায়িত্বসমূহ:গ্রাহকের লেনদেন সঠিক ও দ্রুত সম্পন্ন করা।নগদ, কার্ডসহ বিভিন্ন মাধ্যমে পেমেন্ট গ্রহণ এবং রসিদ প্রদান করা।ক্যাশ রেজিস্টার পরিচালনা করা এবং শিফট শেষে হিসাব মিলিয়ে নিশ্চিত করা।গ্রাহকের প্রশ্ন ও প্রয়োজনীয় তথ্য পেশাদারিত্বের সঙ্গে প্রদান করা।ক্যাশ কাউন্টার পরিষ্কার-পরিচ্ছন্ন ও সুশৃঙ্খল রাখা।প্রতিষ্ঠানের সকল নীতিমালা ও নির্দেশনা মেনে কাজ করা।<br>কর্মস্থল: সৌদি আরব<br>Educational Requirements HSCBachelor/Honors Diploma Masters Skills Required: Cash Management, Accounting Software, POS Software, Cash Handling, Admin and Accounts, Supply Chain and Procurement, Supershop, Cashier, Pos Machine opertation, Super Shop Management Software<br>Experience Requirements At most 1 year(s)<br>Additional Requirements1–2 years experience as a cashier (preferred) Experience in retail/shop/service station will be an advantage Basic English communication skills Good numerical and calculation ability Honest, responsible, and hardworking Ability to work in shifts<br>Job Location Saudi Arabia

<h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">About the Opportunity</h3> <p style="margin:0 0 12px; ************;">This full-time position for a <strong style="font-weight:700;">Head of Data Engineering</strong> is offered by Jobgether on behalf of a partner company. The role is based in Saudi Arabia and provides an opportunity to lead the evolution of a global-scale data ecosystem within a fast-growing technology environment.</p> <h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">The Role of Head of Data Engineering</h3> <p style="margin:0 0 12px; ************;">As a technical leader, the Head of Data Engineering will define the architecture, engineering standards, and strategic direction that power business intelligence and data-driven decisions. This role involves building scalable platforms, strengthening data reliability, and enabling advanced analytics and machine learning capabilities. The position requires collaboration with cross-functional teams to transform complex business needs into impactful technical solutions, combining hands-on technical expertise, team leadership, and long-term vision. The successful candidate will have autonomy to influence technology choices and establish best practices in a remote-first culture.</p> <h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">Key Responsibilities</h3> <ul style="margin:0 0 12px; padding-inline-start:24px; list-style-type:disc; list-style-position:outside;"> <li style="margin:0 0 6px;">Design, develop, and continuously improve a scalable data architecture capable of supporting rapid global expansion.</li> <li style="margin:0 0 6px;">Define engineering standards for data pipelines, including CI/CD practices, automation, version control, and operational excellence.</li> <li style="margin:0 0 6px;">Ensure data reliability, security, governance, and performance across platforms supporting analytics and machine learning initiatives.</li> <li style="margin:0 0 6px;">Lead strategic technology decisions, including the selection and adoption of cloud platforms, tools, and data engineering solutions.</li> <li style="margin:0 0 6px;">Build and mentor high-performing data engineering teams, fostering technical ownership, collaboration, and continuous improvement.</li> <li style="margin:0 0 6px;">Guide the development of efficient ETL/ELT solutions and modern data workflows.</li> <li style="margin:0 0 6px;">Partner with business, product, analytics, and technical stakeholders to translate complex requirements into scalable solutions.</li> <li style="margin:0 0 6px;">Establish processes that improve data quality, accessibility, and the overall effectiveness of the data organization.</li> </ul> <h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">Required Experience and Qualifications</h3> <p style="margin:0 0 12px; ************;">Candidates for this position should possess <strong style="font-weight:700;">5-10 years of experience</strong> in data engineering or a related field. The role requires proven technical leadership in defining data architecture, engineering standards, and strategic direction. Experience in building and mentoring high-performing data engineering teams is essential.</p> <h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">Work Environment</h3> <p style="margin:0 0 12px; ************;">This full-time position is based in Saudi Arabia. The role operates within a fast-growing technology environment and a remote-first culture, offering significant autonomy in technology choices and best practices.</p> <h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">Application Process</h3> <p style="margin:0 0 12px; ************;">All applications and subsequent steps for this Head of Data Engineering position are managed directly by Jobgether's partner company.</p>

<p>Bachelor s degree in mechanical engineering.</p><p><span style="font-size: 11px;">Minimum 06-15 years of experience in Machine-Shop / Workshop operations. Experienced in workshop managerial/Supervisory level for mechanical activities- for rotating equipment /gas turbines/ auxiliaries.</span></p><p><strong>Desired Candidate Profile</strong></p><p><br></p>

<h3 >Role Overview</h3> <p >Scale AI is seeking an experienced <strong >Product Manager of AI Applications Global Public Sector</strong> to join its team in Riyadh. This full-time position involves leading the ideation and development of transformative AI solutions for government entities outside of the United States. The role requires an entrepreneurial product leader to drive significant AI projects and contribute to the company's growth in the public sector.</p> <h3 >About Scale AI's Global Public Sector Team</h3> <p >The Global Public Sector team at Scale AI is responsible for generating, executing, and fostering the company's work with governments and government-backed entities internationally. The team develops bespoke solutions that leverage customer proprietary data and expertise to transform organizations with AI. These applications are powered by the Scale GenAI Platform, a full-stack product designed for building, testing, and deploying frontier AI systems. The team's work includes:</p> <ul > <li >Developing custom AI applications.</li> <li >Building custom Large Language Models (LLMs).</li> <li >Providing high-quality training data for research and government institutions building LLMs.</li> <li >Developing partnerships to foster regional talent growth and AI adoption.</li> </ul> <h3 >Key Responsibilities</h3> <p >The Product Manager will lead large AI projects for one or multiple customers, guiding a cross-functional team to build impactful solutions. Core responsibilities include:</p> <ul > <li >Leading design workshops with clients to define custom AI solutions.</li> <li >Scoping new AI application use cases across various government entities.</li> <li >Leading cross-functional development of AI applications and custom LLMs with diverse stakeholders (Engineering, Operations, Go-to-Market).</li> <li >Engaging consistently with future end-users to solicit feedback and ensure effective prioritization.</li> <li >Staying informed about the latest research in applied AI and custom LLMs.</li> <li >Scoping model evaluation sets and performance requirements, reviewing results, and iterating on solutions.</li> <li >Providing regular progress updates to clients and International Public Sector leadership.</li> </ul> <h3 >Required Qualifications</h3> <p >Candidates for this role typically possess 5-10 years of professional experience, demonstrating a strong foundation in product leadership and AI application development. Essential qualifications include:</p> <ul > <li >Deep experience with AI/ML application development.</li> <li >Ability to think strategically about problem-solving.</li> <li >Comfort with operational details and execution.</li> <li >Strong understanding of software engineering principles and practices.</li> <li >Strong interest in developing AI applications that deliver quantifiable impact.</li> <li >A mission-driven mindset with a commitment to continuous learning and rapid professional growth.</li> </ul> <h3 >Preferred Skills and Experience</h3> <p >The ideal candidate will also bring additional skills and experiences, including:</p> <ul > <li >At least 4 years of experience building products, with specific experience within the last 1-2 years building AI-powered products.</li> <li >Coding experience (Python).</li> <li >Proficiency in Arabic, both written and spoken.</li> <li >A strong technical background (STEM degree) and/or experience building technical software products.</li> <li >A strong understanding of generative AI technologies and their applications in both enterprise and consumer settings.</li> <li >Experience with vibe coding tools (*, Replit, Lovable, Bolt) and design tools (*, Figma, Canva, Miro).</li> <li >Demonstrated leadership, presentation, and communication skills with the ability to influence cross-functional teams.</li> </ul> <h3 >Work Environment and Impact</h3> <p >This role operates within a rapidly growing team focused on high-impact projects. The Product Manager will lead a cross-functional team of engineers, Machine Learning Engineers (MLEs), and operators to build solutions that drive significant revenue for the business. The position is based in Riyadh and is a full-time commitment.</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> General Information <br> <br> Req # <br> WD00105191 <br> <br> Career area: <br> Research/Development <br> <br> Country/Region: <br> Saudi Arabia <br> <br> State: <br> Riyadh <br> <br> City: <br> Riyadh <br> <br> Date: <br> Thursday, September 10, 2026 <br> <br> Working time: <br> Full-time <br> <br> <strong>Additional Locations</strong>:&nbsp; * Saudi Arabia<br> <br> <br> <br> <br> <br> Why Work at Lenovo <br> <br> We are Lenovo. We do what we say. We own what we do. We WOW our customers.&nbsp;<br>Lenovo is a US$83 billion revenue global technology powerhouse, ranked #153 in the Fortune Global 500, and serving millions of customers every day in 180 markets. Focused on a bold vision to deliver Smarter Technology for All, Lenovo has built on its success as the world’s largest PC company with a full-stack portfolio of AI-enabled, AI-ready, and AI-optimized devices (PCs, workstations, smartphones, tablets), infrastructure (server, storage, edge, high performance computing and software defined infrastructure), software, solutions, and services. Lenovo’s continued investment in world-changing innovation is building a more equitable, trustworthy, and smarter future for everyone, everywhere. Lenovo is listed on the Hong Kong stock exchange under Lenovo Group Limited (HKSE: 992) (ADR: LNVGY).&nbsp;<br><br> This transformation together with Lenovo’s world-changing innovation is building a more inclusive, trustworthy, and smarter future for everyone, everywhere. To find out more visit www.lenovo.com, and read about the latest news via our StoryHub.<br> <br> <br> <br> <br> <br> Description and Requirements <br> <br> <br><p>Join Lenovo's Group CTO KSA R&amp;D Center as an AI Research Scientist, where you'll help shape the next generation of intelligent systems across robotics, autonomous platforms, smart environments, and industrial AI. In this role, you will research, develop, and deploy advanced AI solutions spanning computer vision, multimodal AI, agentic architectures, and Edge AI, transforming innovative ideas into scalable, real-world technologies that power the future of intelligent automation.</p><br>&nbsp;<p><strong>What You Will Do</strong></p><br><ul><li>Research, develop, and optimize AI, machine learning, computer vision, and agentic AI solutions for real-world applications.</li><li>Design perception systems including object detection, classification, segmentation, tracking, pose estimation, and recognition.</li><li>Build AI capabilities for robotics and autonomous systems, including localization, sensor fusion, navigation, prediction, and decision-making.</li><li>Develop and integrate LLMs, VLMs, multimodal models, and AI agents to enable intelligent reasoning and human-machine interaction.</li><li>Deploy and optimize AI models across edge and cloud environments, balancing performance, scalability, latency, and cost.</li><li>Evaluate emerging AI technologies and foundation models, creating prototypes, benchmarks, and performance metrics.</li><li>Collaborate with global research, engineering, and product teams to transform research into production-ready solutions, patents, and intellectual property.</li></ul><br><p><strong>Who You Are</strong></p><br><ul><li>Master's degree in Computer Science, Robotics, Mathematics, Artificial Intelligence, or a related field.</li><li>3+ years of experience developing and deploying machine learning, computer vision, or agentic AI solutions from research through production.</li><li>Strong expertise in computer vision techniques, including detection, classification, segmentation, tracking, and sensor fusion.</li><li>Hands-on experience with PyTorch, TensorFlow, OpenCV, and modern AI/ML development frameworks.</li><li>Experience working with LLMs, VLMs, multimodal AI, foundation models, and autonomous AI systems.</li><li>Strong programming skills in Python, with experience in C++ and AI deployment on edge or cloud platforms.</li></ul><br><p><strong>What We Can Offer You</strong></p><br><ul><li>The opportunity to work on cutting-edge AI, robotics, and intelligent systems with global impact.</li><li>A collaborative R&amp;D environment focused on innovation, research excellence, and emerging technologies.</li><li>Career growth opportunities through advanced research, patent creation, and participation in Lenovo's global AI ecosystem.</li></ul> <br> <br> <em><span>We are an Equal Opportunity Employer and do not discriminate against any employee or applicant for employment because of race, color, sex, age, religion, sexual orientation, gender identity, national origin, status as a veteran, and basis of disability or any federal, state, or local protected class.</span></em><br> <br> <br> <br> <br> <br> <strong>Additional Locations</strong>:&nbsp; * Saudi Arabia<br> <br> <br> * Saudi Arabia <br> <br> <br><strong>AI PROCESSING NOTICE</strong><br>We use AI-based tools to support some of our processes (e.g. online interviews recordings and transcripts) in order to achieve better efficiency, accuracy and for our documentation purposes. AI can make mistakes, but we always make sure that the outputs are manually reviewed by a human. You can always opt-out or contact us in case of any question.<br><br> <br> <br> <br> <br> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> No experience required </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>Design, configure, and deploy VMware virtualization solutions tailored to client needs.<br> Administer and manage VMware vSphere infrastructure, focusing on ESXi hosts and vCenter Server.<br> Maintain and optimize virtual machine templates, snapshots, and clones.<br> Monitor system performance, implementing optimizations for enhanced efficiency.<br> Troubleshoot and resolve technical issues related to the VMware infrastructure.<br> Implement VMware NSX for advanced network virtualization.<br> Work collaboratively with clients and internal teams to devise customized VMware solutions.<br> Document installation procedures and maintain comprehensive technical documentation.<br> Bachelor's degree in Computer Science, Information Technology, or a related field.<br> A minimum of 5 years of relevant experience as a VMware Engineer or in a similar capacity.<br> Proficient in VMware vSphere, ESXi, and vCenter Server.<br> Experience with VMware NSX for network virtualization.<br> Familiar with managing virtual machines, templates, and snapshots.<br> Understanding of backup and disaster recovery strategies for VMware environments.<br> Strong analytical, troubleshooting, and problem-solving skills.<br> Effective communication and teamwork skills.<br> VMware Certified Professional (VCP) certification is a plus.<br></span> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> No experience required </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>The purpose of the position</p><p>Design and develop intelligent dashboards and automated reports that support management in monitoring project performance, finance, health, safety, housing, and facilities. The role utilizes business intelligence and artificial intelligence tools to transform raw data into actionable insights, aiding in decision-making, performance monitoring, cost reduction, and enhancing operational efficiency within the infrastructure and contracting company.</p><p>Key Responsibilities</p><p><b>Developing dashboards and reports</b></p><ul><li>Design and build interactive dashboards for monitoring projects, finance, health, safety, and housing.</li><li>Prepare automated and periodic reports for senior management and project managers.</li><li>Develop clear Key Performance Indicators (KPIs) and operational metrics.</li><li>Ensure timely and accurate data updates.</li></ul><p><b>Data analysis and insights extraction</b></p><ul><li>Analyze project data, costs, timelines, and rates.</li><li>Utilize artificial intelligence and machine learning techniques to discover patterns and anomalies.</li><li>Provide predictive analytics and data-driven recommendations.</li><li>Support management in understanding the causes of anomalies and suggest corrective actions.</li></ul><p><b>Data management and system integration</b></p><ul><li>Collect, clean, and transform data from ERP systems, project management, accounting, and others.</li><li>Build reliable data models that support reporting and dashboards.</li><li>Ensure data quality and consistency across different systems.</li><li>Collaborate with IT, finance, and project teams for smooth data flow.</li></ul><p><b>Decision support</b></p><ul><li>Provide analytical insights that assist in monitoring project performance and controlling costs.</li><li>Support finance, project, management, health, and safety departments with tailored reports.</li><li>Contribute to improving planning and forecasting processes.</li><li>Train users on utilizing dashboards and reports.</li></ul><p><b>Continuous improvement and innovation</b></p><ul><li>Propose enhancements to reports and dashboards continuously.</li><li>Explore new tools and techniques in business intelligence and artificial intelligence.</li><li>Automate repetitive reports to reduce manual effort.</li><li>Document processes, models, and reports.</li></ul><p><b>Compliance and data security</b></p><ul><li>Adhere to data protection and confidentiality policies.</li><li>Ensure secure access to dashboards and reports.</li><li>Support audit and compliance requirements related to data and reports.</li></ul><p><br></p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p>Qualifications</p><ul><li>Bachelor's degree in Management Information Systems, Data Science, Statistics, Business Administration, or a related field.</li><li>Professional certifications in business intelligence or data analysis (such as Power BI, Tableau, Microsoft Certified, or equivalent) preferred.</li></ul><p>Experience</p><ul><li>Experience of at least 3–5 years in business intelligence or data analysis or management reporting.</li><li>Experience in using BI tools (Power BI or Tableau or similar) is essential.</li><li>Experience in the construction or infrastructure or contracting sector is preferred.</li><li>Knowledge of artificial intelligence or predictive analytics is a strong advantage.</li></ul><p>Technical Knowledge</p><ul><li>Proficiency in business intelligence tools (Power BI, Tableau, or equivalent).</li><li>Advanced skills in Excel and SQL.</li><li>Understanding of data models and building Data Models.</li><li>Knowledge of the fundamentals of artificial intelligence and machine learning and their applications in analysis.</li><li>Experience with ERP systems and project and financial data.</li><li>Ability to visualize data effectively.</li><li>Knowledge of data warehouse concepts is preferred.</li></ul><p>Core Competencies</p><p><b>Technical Competencies</b></p><ul><li>Designing intelligent dashboards and reports</li><li>Data analysis and insights extraction</li><li>Building data models</li><li>Using BI and artificial intelligence tools</li><li>Automating reports</li></ul><p><b>Behavioral Competencies</b></p><ul><li>Analytical thinking and problem-solving</li><li>Attention to detail and accuracy</li><li>Effective communication and presenting results clearly</li><li>Understanding business needs</li><li>Teamwork and collaboration with different departments</li><li>Initiative and continuous improvement</li><li>Maintaining data confidentiality</li></ul><p>Key Performance Indicators (KPIs)</p><ul><li><b>Quality of reports:</b> Accuracy and completeness of dashboards and reports.</li><li><b>Timeliness:</b> Delivery of reports and dashboards within specified deadlines.</li><li><b>Utilization of solutions:</b> Level of adoption and use of dashboards by management and departments.</li><li><b>Impact:</b> Improving clarity of insights and supporting decision-making while reducing time spent on manual report preparation.</li><li><b>Data quality:</b> Decrease in errors and inconsistencies in displayed data.</li></ul><p><br></p></div>

<h3 >Electronic Technician Role at Gulfmaid</h3> <p >Gulfmaid is seeking an experienced <strong >Electronic Technician</strong> to join its Maintenance team. This full-time position is based in <strong >Jeddah, Makkah, Saudi Arabia</strong>, and requires 5-10 years of relevant experience in electronic and electrical systems maintenance.</p> <h3 >Role Summary</h3> <p >The Electronic Technician plays a critical role in ensuring the operational efficiency of production machinery. This involves diagnosing and resolving complex electrical and electronic control issues, performing essential maintenance, and contributing to efforts that minimize downtime and enhance system reliability within the facility.</p> <h3 >Key Responsibilities</h3> <ul > <li >Troubleshoot electrical and electronic control issues that arise during production operations.</li> <li >Execute both preventive and corrective maintenance activities on industrial equipment.</li> <li >Diagnose faults within PLCs, HMIs, sensors, control circuits, and various industrial control systems.</li> <li >Support root cause analysis and implement corrective actions to effectively minimize machine downtime.</li> <li >Conduct thorough machine inspections to identify critical electrical and electronic components requiring attention.</li> <li >Maintain accurate and detailed maintenance records and reports.</li> <li >Ensure strict compliance with all safety, quality, and environmental requirements.</li> </ul> <h3 >Qualifications and Experience</h3> <ul > <li >Diploma or Associate Degree in Electronics, Electrical Engineering, or a closely related technical field.</li> <li >A minimum of 5-10 years of hands-on experience with PLCs, HMIs, sensors, and industrial control systems.</li> <li >Demonstrated strong knowledge of electronic circuits, components, and control system principles.</li> </ul> <h3 >Required Skills and Attributes</h3> <ul > <li >Proficiency in troubleshooting and strong analytical skills for fault diagnosis.</li> <li >Possession of a PLC programming or electronic troubleshooting certification is considered an advantage.</li> </ul> <h3 >Work Environment and Application</h3> <p >This is a full-time position within Gulfmaid's Maintenance team, located in Jeddah, Makkah, Saudi Arabia. Qualified candidates are invited to apply.</p>

<h3 >Electronic Technician Role at Gulfmaid</h3> <p >Gulfmaid is seeking an experienced <strong >Electronic Technician</strong> to join its Maintenance team. This full-time position is based in <strong >Jeddah, Makkah, Saudi Arabia</strong>, and requires 5-10 years of relevant experience in electronic and electrical systems maintenance.</p> <h3 >Role Summary</h3> <p >The Electronic Technician plays a critical role in ensuring the operational efficiency of production machinery. This involves diagnosing and resolving complex electrical and electronic control issues, performing essential maintenance, and contributing to efforts that minimize downtime and enhance system reliability within the facility.</p> <h3 >Key Responsibilities</h3> <ul > <li >Troubleshoot electrical and electronic control issues that arise during production operations.</li> <li >Execute both preventive and corrective maintenance activities on industrial equipment.</li> <li >Diagnose faults within PLCs, HMIs, sensors, control circuits, and various industrial control systems.</li> <li >Support root cause analysis and implement corrective actions to effectively minimize machine downtime.</li> <li >Conduct thorough machine inspections to identify critical electrical and electronic components requiring attention.</li> <li >Maintain accurate and detailed maintenance records and reports.</li> <li >Ensure strict compliance with all safety, quality, and environmental requirements.</li> </ul> <h3 >Qualifications and Experience</h3> <ul > <li >Diploma or Associate Degree in Electronics, Electrical Engineering, or a closely related technical field.</li> <li >A minimum of 5-10 years of hands-on experience with PLCs, HMIs, sensors, and industrial control systems.</li> <li >Demonstrated strong knowledge of electronic circuits, components, and control system principles.</li> </ul> <h3 >Required Skills and Attributes</h3> <ul > <li >Proficiency in troubleshooting and strong analytical skills for fault diagnosis.</li> <li >Possession of a PLC programming or electronic troubleshooting certification is considered an advantage.</li> </ul> <h3 >Work Environment and Application</h3> <p >This is a full-time position within Gulfmaid's Maintenance team, located in Jeddah, Makkah, Saudi Arabia. Qualified candidates are invited to apply.</p>

Presales Lead (Enterprise AI & Software Solutions)<br>Location: Riyadh, Saudi Arabia<br>About the Role We are seeking an experienced Presales Lead to drive technical sales strategy for enterprise AI and software solutions across the region. This is a senior, customer-facing leadership role that partners closely with Sales, Product, and Engineering teams to shape complex digital transformation opportunities, influence executive stakeholders, and deliver winning solution strategies. The ideal candidate will have extensive experience leading presales engagements for enterprise software, AI, cloud, or digital transformation solutions and will be comfortable engaging with C-suite executives, government entities, and large enterprise customers.<br>Key Responsibilities Lead the technical sales strategy for strategic enterprise and government opportunities. Partner with Sales leadership to qualify opportunities and develop account-specific solution strategies. Engage C-level executives, business leaders, and technical stakeholders to understand business priorities and define solution roadmaps. Own the solution design for complex, multi-product enterprise engagements. Lead executive presentations, discovery workshops, technical demonstrations, and Proof of Concepts (PoCs). Oversee the preparation of technical proposals, solution architectures, RFP/RFI responses, and commercial documentation. Collaborate with Product, Engineering, and Delivery teams to ensure technical feasibility and successful solution positioning. Act as the technical authority throughout the sales lifecycle, managing technical risks and addressing customer concerns. Build trusted relationships with strategic customers and key partners. Mentor and coach presales consultants while establishing best practices, reusable assets, and presales methodologies. Monitor industry trends, emerging AI technologies, and competitive offerings to strengthen market positioning. Support strategic initiatives, go-to-market planning, and solution development for priority industries.<br>Requirements Bachelor's degree in Computer Science, Information Technology, Engineering, or a related discipline. A Master's degree is an advantage.12+ years of experience in Presales, Solution Consulting, Solution Architecture, or Enterprise Technology Consulting. Proven experience leading technical sales for enterprise software, AI, Saa S, cloud, or digital transformation solutions. Demonstrated success supporting complex, high-value enterprise deals involving multiple stakeholders. Strong executive presence with experience presenting to CIOs, CTOs, CEOs, government executives, and senior business leaders. Deep understanding of enterprise architecture, cloud platforms, APIs, data platforms, and systems integration. Strong knowledge of AI technologies, including machine learning, generative AI, computer vision, natural language processing, intelligent automation, or advanced analytics. Experience leading enterprise workshops, architecture sessions, and Proof of Concepts. Strong commercial acumen with the ability to balance technical excellence and business value. Excellent communication, presentation, negotiation, and stakeholder management skills. Fluent in English. Arabic is an advantage.<br>Preferred Background AI and Machine Learning platforms Enterprise Software and Saa S vendors Cloud providers Data and Analytics platforms Digital Transformation consultancies Systems Integrators Intelligent Automation and Business Process platforms<br>What Success Looks Like Drive higher win rates for strategic enterprise opportunities. Become a trusted technical advisor to executive customers. Lead complex solution strategies that enable successful digital transformation initiatives. Strengthen collaboration between Sales, Product, and Delivery teams. Elevate the organization's technical sales capability through leadership, mentorship, and innovation.

Our client, a leading mining and geological services provider, is inviting applications for the position of Exploration Director, based at their Head Office in Jeddah, Saudi Arabia.<br>Reporting directly to the Chief Executive Officer, the Exploration Director will lead and expand the mineral exploration consulting business across Saudi Arabia and international markets. This executive position is responsible for technical governance, strategic business development, multi-disciplinary team leadership, and managing high-level client relationships.<br>Key Scope & Accountabilities Strategic Business Development: Drive commercial growth, define market strategy, and expand the consulting service portfolio across exploration, resource evaluation, geotechnical, and environmental/ESG services. Technical Governance: Provide strategic oversight for target generation, drilling programs, and resource evaluation while ensuring alignment with international best practices (JORC, NI 43-101, S-K 1300). Operational Leadership: Oversee complex client engagements, manage project performance metrics (scope, schedule, budget), and foster an accountability-driven consulting culture. Team & Capability Building: Mentor senior exploration geologists and technical consultants, establishing clear succession plans and capability development frameworks.<br>Mandatory Selection Criterion Important Note: To be considered for this role, candidates must have previously held a senior technical or management leadership position within an established geological or mining consulting firm. Candidates whose experience is limited exclusively to owner-operator or mining companies without consulting leadership experience will not qualify.<br>Candidate Profile & Qualifications Education: Bachelor of Science in Geology, Economic Geology, Geological Engineering, or a related discipline (Master of Science preferred). Experience: Minimum of 15 years of progressive mineral exploration experience, including at least 8 to 10 years within a reputable geological or mining consulting firm. Professional Registration: Active registration as a Professional Geologist or equivalent (e.g., P. Geo., CGeol, Pr. Sci. Nat., Aus IMM, SME) is highly desirable. Location & Mobility: Based in Jeddah, Saudi Arabia, with availability for required domestic and international travel.

Managed.sa is seeking a hands-on Penetration Tester to conduct security assessments, identify and validate vulnerabilities, and provide practical remediation recommendations across client environments.<br><br>The ideal candidate has strong offensive-security skills, practical testing experience, and the ability to prepare clear and professional technical reports.<br><br>Key Responsibilities<br><br>Conduct penetration testing across web applications, APIs, networks, infrastructure, and cloud environments Perform manual and automated vulnerability assessments Safely exploit identified vulnerabilities to assess their technical and business impact Test authentication, authorization, session management, and application logic Participate in red-team and adversary-simulation activities when required Conduct source-code security reviews and identify insecure coding practices Document findings with supporting evidence, risk ratings, and remediation recommendations Present and explain technical findings to clients and internal stakeholders Conduct retesting to verify that vulnerabilities have been properly remediated Stay updated on emerging vulnerabilities, exploitation techniques, and offensive-security tools<br><br>Requirements<br><br>Bachelor's degree in Cybersecurity, Computer Science, Information Security, or a related field2-3 years of practical experience in penetration testing or offensive security Hands-on experience in web application and network penetration testing Strong knowledge of vulnerability assessment and exploitation techniques Good understanding of network protocols, including TCP/IP, DNS, and HTTPStrong working knowledge of Linux and Windows environments Strong understanding of web technologies, APIs, authentication mechanisms, and the OWASP Top 10Experience with tools such as Burp Suite, Metasploit, Nmap, Wireshark, and Nessus Scripting skills in Python, Bash, Power Shell, Ruby, or a similar language Strong technical-reporting and communication skills Ability to work full-time on-site in Riyadh<br><br>Preferred Experience<br><br>Cloud security assessments Red-team operations Source-code security reviews Client-facing penetration-testing engagements<br><br>Preferred Certifications<br><br>One or more of the following certifications would be an advantage:<br><br>Offensive Security Certified Professional (OSCP) Certified Ethical Hacker (CEH) GIAC Penetration Tester (GPEN) Offensive Security Experienced Penetration Tester (OSEP) Certified Red Team Professional (CRTP) Certified Red Team Operator (CRTO)

BUSINESS INTRODUCTIONMajid Al Futtaim Holding is the leading shopping mall, retail, communities, entertainment developer and operator in the Middle East, North Africa, and Central Asia regions. With over 43,000 people, revenues of over US$ 11 Billion, and operations in 18 countries. Some of the iconic brands we carry include Mall of the Emirates, Carrefour, All Saints, Lego, City Center, Abercrombie & Fitch, & Vox Cinemas. We believe in making Great Moments for Everyone, Every day.<br>JOB TITLECustomer Care Representative | MAF Life Style | Customer Care<br>ROLE SUMMARYRole Purpose: The Customer Care Representative is responsible for maximizing company sales growth and profitability by overseeing the daily routines, coaching, and developing associates to achieve better performance.<br>ROLE PROFILECommunicate all personnel, operational, and product issues to the appropriate Contact Center supervisor or manager. Process all customer requests accurately and efficiently. Focus on meeting the customer’s expectations by utilizing all resolution options,Communicate pertinent information to all Contact Center associates. Communicate effectively and efficiently with all company associates and business contacts. Actively participate in regular team meetings and leadership meetings, as required. Promote a keen sense of teamwork by working together safely, effectively, respectfully and efficiently with all associates.<br>REQUIREMENTS<br>High School Certificate Retail or sales background English & Arabic speaker Minimum 1 year of experience in Customer services<br>WHAT WE OFFER<br>At Majid Al Futtaim, we’re on a mission to create great moments, to spread happiness, to build, experiences that stay in our memories for a lifetime. We’re proud to say that over the past 27 years, we have built a reputation as a regional market leader in what we do. Join us! Work in a friendly environment, where everyone shares positive vibes and excited about our future. Work with over 45,000 diverse and talented colleagues, all guided by our Leadership Model.

Our client, a leading mining and geological services provider, is inviting applications for the position of Exploration Director, based at their Head Office in Jeddah, Saudi Arabia.<br>Reporting directly to the Chief Executive Officer, the Exploration Director will lead and expand the mineral exploration consulting business across Saudi Arabia and international markets. This executive position is responsible for technical governance, strategic business development, multi-disciplinary team leadership, and managing high-level client relationships.<br>Key Scope & Accountabilities Strategic Business Development: Drive commercial growth, define market strategy, and expand the consulting service portfolio across exploration, resource evaluation, geotechnical, and environmental/ESG services. Technical Governance: Provide strategic oversight for target generation, drilling programs, and resource evaluation while ensuring alignment with international best practices (JORC, NI 43-101, S-K 1300). Operational Leadership: Oversee complex client engagements, manage project performance metrics (scope, schedule, budget), and foster an accountability-driven consulting culture. Team & Capability Building: Mentor senior exploration geologists and technical consultants, establishing clear succession plans and capability development frameworks.<br>Mandatory Selection Criterion Important Note: To be considered for this role, candidates must have previously held a senior technical or management leadership position within an established geological or mining consulting firm. Candidates whose experience is limited exclusively to owner-operator or mining companies without consulting leadership experience will not qualify.<br>Candidate Profile & Qualifications Education: Bachelor of Science in Geology, Economic Geology, Geological Engineering, or a related discipline (Master of Science preferred). Experience: Minimum of 15 years of progressive mineral exploration experience, including at least 8 to 10 years within a reputable geological or mining consulting firm. Professional Registration: Active registration as a Professional Geologist or equivalent (e.g., P. Geo., CGeol, Pr. Sci. Nat., Aus IMM, SME) is highly desirable. Location & Mobility: Based in Jeddah, Saudi Arabia, with availability for required domestic and international travel.

Confidential N-2 Finance Leadership Role | Market-Leading Regional Group We are conducting a confidential search on behalf of one of Saudi Arabia's largest and most recognized organizations — a market leader serving over 5 million customers across the Kingdom.<br>Senior Director – Finance Operations Location: Jeddah, Saudi Arabia Reports to: CFO | N-2 to CEOThis is a high-impact leadership role overseeing the full finance operations function — Accounting, Financial Control, Treasury, Credit Management & Collections, Procurement, and Finance Excellence — for a large, publicly regulated, IFRS-compliant organization. You'll lead four Director-level reports and act as a key financial governance partner to the Audit Committee, external auditors, and executive leadership.<br>Key Responsibilities Own financial reporting, accounting operations, and audited (IFRS-compliant) financial statement delivery Lead financial control, treasury operations, liquidity planning, and tax governance Drive enterprise credit management, collections strategy, and DSO/working capital optimization Oversee procurement and cost governance for non-medical spend Lead finance transformation, automation, and PMO initiatives Provide financial impact assessment and decision support on company-wide strategic and transformation programs<br>What We're Looking For12+ years of progressive finance leadership experience Strong background in Controllership / Financial Control is a key requirement — including regulatory reporting, financial governance, and reconciliation frameworks Strong IFRS expertise and proven experience managing audited financial statements, external auditors, and audit committees Deep experience across Treasury, Tax, AP/AR, and working capital management Background in large corporates, listed companies, healthcare/insurance, banking, Big 4, or complex multinational finance structures CPA or SOCPA preferred A hands-on operator who can balance strategic thinking with execution, and act as a true business partner — not just a finance operator<br>Candidate Profile This search is open to Saudi national candidates based in the Kingdom or internationally, with strong exposure to large-scale finance operations in complex organizations.

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li>Precisely cut pipes to specified lengths and dimensions using advanced cutting machinery and tools, ensuring adherence to strict production tolerances.</li><li>Operate and maintain a variety of pipe cutting equipment, including saws, plasma cutters, and laser cutters, performing routine checks and minor adjustments to ensure optimal performance.</li><li>Read and interpret technical drawings, blueprints, and work orders to accurately determine cutting parameters, angles, and material requirements.</li><li>Inspect cut pipe sections for defects, dimensional accuracy, and surface finish, rejecting any non-conforming materials promptly.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>High school diploma or equivalent; vocational training in machining or manufacturing is a plus.</li><li>Proven experience (2+ years) as a pipe cutting operator or in a similar production role within a manufacturing environment.</li><li>Proficiency in reading and interpreting technical drawings, blueprints, and schematics.</li><li>Demonstrated ability to operate and maintain various types of pipe cutting machinery (e.g., band saws, abrasive saws, plasma cutters).</li></ul><p></p></section>

Egis is a leading global organisation in architecture, consulting, construction engineering, operations and mobility services. We partner with clients to design, deliver and operate smarter infrastructure and places that respond to the world’s evolving needs.<br><br>With more than 22,000 employees worldwide, we combine global capability with strong local insight. Our multidisciplinary expertise enables us to deliver innovative, practical and sustainable solutions that help build more balanced, resilient communities.<br><br>At Egis, you’ll be part of a business shaping the future of cities, transport, energy and the built environment, creating lasting impact where it matters most.<br><br><br><br>Job Description<br><br>The Airport Systems Engineer ICT / ELV shall be responsible for the planning, design review, engineering coordination, supervision, testing, commissioning, and handover of ICT, ELV, Security, and Special Airport Systems for airport infrastructure and aviation-related projects. <br><br>The role requires extensive experience in airport environments and the ability to coordinate with clients, operators, consultants, contractors, regulatory authorities, and stakeholders to ensure successful project delivery in compliance with applicable international and local standards. <br><br>Candidates without proven airport project experience will not be considered. <br><br> <br><br>Required Airport Experience <br><br>The candidate shall demonstrate experience in one or more of the following airport project types: <br><br>Airport Passenger Terminals. Cargo Terminals and Logistics Facilities. Airport Security Facilities. Airside Infrastructure Projects. Airport Expansion and Modernization Projects. Airport Operational Readiness and Transition (ORAT) Activities. Airport Systems Integration Projects. Technical Competencies <br>The candidate shall possess knowledge and practical experience in several of the following systems: <br><br>including ICT systems (structured cabling, LAN/WAN, data centers, active equipment, wireless, voice and IP telephony, and network security), airport operational systems (FIDS, CUPPS, CUSS, BHS/BRS interfaces, AODB, master clock, and PAVA), security systems (CCTV, access control, PIDS, screening equipment, X-ray, explosive and metal detection, vehicle access control, ANPR, and barriers), and ELV systems (fire alarm, BMS, IPTV, audiovisual, UPS, integrated platforms, and emergency communication). <br> <br><br>Key Responsibilities <br><br>Key responsibilities include reviewing design documents, calculations, specifications, and drawings; assessing shop drawings and technical submittals; ensuring compliance with project requirements and standards; supporting value engineering initiatives; monitoring installation activities and conducting inspections; reviewing contractor progress and quality; identifying non-conformities; supporting testing and commissioning through review of procedures and witnessing FAT/SAT; verifying system performance and integration; coordinating with multidisciplinary teams and stakeholders; participating in project meetings and planning; and supporting handover activities including as-built documentation, O&M manuals, snagging, and final acceptance<br>Knowledge of Standards <br><br>The Candidates should demonstrate familiarity with applicable standards and regulations, including ICAO SARPs, IATA Airport Development and Operations Guidelines, FAA Advisory Circulars and design standards, NFPA, IEC, TIA/EIA, and BICSI standards, as well as local building codes, airport security regulations, and aviation authority requirements. <br>Preferred Experience <br><br>International airport projects. Greenfield airport developments. Major airport expansion projects. ORAT and airport transition programs. Large-scale integrated airport systems. Experience within the GCC region. <br><br><br>Qualifications<br><br>Bachelor's Degree in Electrical Engineering, Electronics Engineering, Telecommunications Engineering, ICT Engineering, Computer Engineering, or related discipline. Professional engineering registration or eligibility for registration with a recognized engineering body is preferred. Minimum 10 years of relevant professional experience in ICT, ELV, Security, or Airport Systems. Minimum 5 years of airport project experience (Mandatory). Experience in design consultancy, PMC, supervision consultancy, contractor, or airport operator environments. Excellent written and verbal communication skills in English.

<p>The charging system swap is a business-critical transformation with direct impact on revenue, customer experience, and service continuity. Therefore, we require a senior, battle-tested Program Manager to lead the program end-to-end from the Telecom operator side The role requires a strong personality and leadership presence to drive delivery across internal teams and vendors. Key expectations: • Proactive risk identification and transparent reporting • Timely escalation of critical issues to leadership when needed • Strong ownership of delivery timelines, migration readiness, and operational stability • Clear governance and structured communication with stakeholders • Ability to challenge vendor timelines and enforce contractual commitments</p><p>• 10+ years of program/project management experience, preferably in telecom BSS/Core transformations • Strong understanding of OCS/CHF, PCRF/PCF, telecom charging architecture, and BSS integrations • Proven experience delivering at least one telecom charging system migration or platform swap in a live production environment • Experience managing large multi-vendor programs and enforcing delivery milestones and commitments • Ability to coordinate across Core Network, IT/BSS, Operations, Revenue assurance, Business and vendor teams</p>